Concrete Catalogue - 2022 (UK)

C O N C R E T E C ATA LO G U E SEPTEM BER 2022

Re-bar binders Re-bar cutters Duplex nailer Concrete nailers High pressure

www.tjep.eu

K YO CER A U NIM ERCO FASTENING A /S

A GLOBAL

COLLABORATION PARTNER About Kyocera Unimerco

More than 55 years of experience

Kyocera Unimerco is a global manufacturer, distributor and service company.

The Danish company was founded in 1964 under the name UNIMERCO where the head office is in Sunds, near Herning, Denmark.

The group includes a Tooling Division, which deals with consultancy and sales of tool solutions for machining and measurement and checking tools for the manufacturing industry, and a Fastening Division, which supplies a wide range of standard, brad and finish nailers, staplers, compressors, re-bar binders and cutters, and accessories for the construction industry.

In 2011, all activities were taken over by the Japanese company KYOCERA. This has created an even stronger company with an expanded product range, a wide network of companies and dealers throughout the world, and an ambitious growth plan.

The KYOCERA Corporation comprises more than 290 companies, 75.000 employees and generates sales of approximately EUR 13 billion.

OVERVIEW OF SYMBOLS 2

Supplied with 2 rolls TJEP wire

2

Supplied with extra handle

TJEP fuel cell, yellow, 78 mm

2

Supplied with 2 TJEP blades

2

Supplied with 2 batteries

TJEP fuel cell, orange, 165 mm

1

Supplied in a plastic case

1

Supplied with TJEP battery charger

1

Supplied in a cardboard box

2

www.tjep.eu

-15°

TJEP fuel cell, red, 165 mm.

Full function down to -15°C

Full head

K YOCER A UNIMERCO Fastening A /S ·

Drejervej 2, DK-7451 Sunds

RE- BA R BIN DERS

3

3

2

2

1 1 6

6

4

4

5

5

Video

Video

TJEP ULTRA GRIP 25

L: 100 m Ø: 0.8 mm ULTRA GRIP WIRE, p. 5

TJEP ULTRA GRIP 40

1

18V brushless motors

1

18V brushless motors

2

Sealed gearbox for extra power

2

Sealed gearbox for extra power

3

Optimised nose design with long lifetime, ensuring easier access to the point you want to tie

3

Optimised nose design with long lifetime, ensuring easier access to the point you want to tie

4

Longer and narrower handle for better ergonomics

4

Longer and narrower handle for better ergonomics

5

18V 4Ah Li-ion slide-in battery

5

18V 4Ah Li-ion slide-in battery

6

Connector for electronic extension

6

Connector for electronic extension

L: 100 m Ø: 0.8 mm ULTRA GRIP WIRE, p. 5

SPECIFICATIONS

SPECIFICATIONS

Item no.

124012

Item no.

124002

EAN no.

5702551240120

EAN no.

5702551240021

Size (L×W×H)

281 × 109 × 300 mm

Size (L×W×H)

297 × 109 × 300 mm

Weight

2.50 kg

Weight

2.60 kg

Workpc. thickness

8 - 25 mm

Workpc. thickness

12 - 40 mm

Wraps

2-3

Wraps

2-3

Ties per coil

160 - 220

Ties per coil

120 - 160

Ties per battery charge

+5,000 (at max. wraps)

Ties per battery charge

+4,500 (at max. wraps)

2

2

1

2

1

ACCESSORIES

2

1

1

ACCESSORIES

Description

Item no.

Description

Item no.

TJEP extension bar

124202

TJEP extension bar

124202

TJEP holster

124203

TJEP holster

124203

TJEP lithium‑Ion battery 4,0Ah

124204

TJEP lithium‑Ion battery 4,0Ah

124204

TJEP battery charger for TJEP ULTRA GRIP

124205

TJEP battery charger for TJEP ULTRA GRIP

124205

USED FOR

USED FOR

Floor Heating, Pre-fab, Rebar, Roads and bridges.

Floor Heating, Foundations and footing, Pre-fab, Rebar, Roads and bridges, Swimmingpools.

All prices are suggested resale prices and stated in EUR excl. VAT.

TJEP@K YOCER A-UNIMERCO.COM

· Tel. +45 97 14 14 40

www.tjep.eu

3

RE- BA R BIN DERS

INCREASE EFFICIENCY WITH

TJEP ULTRA GRIP 3

TJEP ULTRA GRIP re-bar binder increases your efficiency and improves your work environment significantly compared to the physically demanding, monotonous and time-consuming work of manual tying.

1

6

TJEP ULTRA GRIP is the 3. generation of re-bar binders from TJEP and is a further development of our popular XP re-bar binders. The knowhow gained from previous generations has been incorporated into the new ULTRA GRIP series, which sets new standards in tying speed and quality.

Easy and fast torque adjustment

2

4

5

Video

TJEP ULTRA GRIP 58

L: 100 m Ø: 0.8 mm ULTRA GRIP WIRE, p. 5

The new digital control panel ensures easy and fast torque adjustments, while the clear display gives you a quick overview of the current torque setting and number of wraps.

1

18V brushless motors

2

Sealed gearbox for extra power

3

Optimised nose design with long lifetime, ensuring easier access to the point you want to tie

4

Longer and narrower handle for better ergonomics

5

18V 4Ah Li-ion slide-in battery

6

Connector for electronic extension

SPECIFICATIONS Item no.

124022

EAN no.

5702551240229

Size (L×W×H)

312 × 109 × 310 mm

Weight

2.80 kg

Workpc. thickness

30 - 58 mm

Wraps

3-4

Ties per coil

80 - 96

Ties per battery charge

+3,200 (at max. wraps) 2

2

1

1

ACCESSORIES

2 wraps

3 wraps

Description

Item no.

TJEP extension bar

124202

TJEP holster

124203

TJEP lithium‑Ion battery 4,0Ah

124204

TJEP battery charger for TJEP ULTRA GRIP

124205

USED FOR Foundations and footing, Pre-fab, Rebar, Roads and bridges, Swimmingpools.

4 wraps All prices are suggested resale prices and stated in EUR excl. VAT.

4

www.tjep.eu

K YOCER A UNIMERCO Fastening A /S ·

Drejervej 2, DK-7451 Sunds

RE- BA R BIN DERS Ø: 0.8 mm

TJEP ULTRA GRIP WIRE

TJEP WIRE

WILL FIT TJEP

Ø: 1.5 mm

WILL FIT RE-BAR XP 25 Binder, RE-BAR XP 40 Binder, ULTRA GRIP 25, ULTRA GRIP 40, ULTRA GRIP 58

TJEP

RE-BAR 25 Binder, RE-BAR 40 Binder

EP WIRE, 0.8 MM

ULTRA GRIP WIRE Dimension

Item no.

Pcs./box

Box/pal.

ULTRA GRIP WIRE

124152

20

96

ULTRA GRIP WIRE

124153

40

48

ULTRA GRIP WIRE

124155

40

48

ULTRA GRIP WIRE

124156

40

48

ULTRA GRIP WIRE

124157

40

48

Dimension

Item no.

Pcs./box

Box/pal.

EP WIRE, 0.8 mm

124150

50

40

Wire, 0.8 mm

124151

50

40

Dimension

Item no.

Pcs./box

Box/pal.

Tying wire, 1.5 mm

114395

50

50

TYING WIRE WILL FIT MAX

RB 650, RB 655

TYING WIRE, 1.5 MM

All prices are suggested resale prices and stated in EUR excl. VAT.

TJEP@K YOCER A-UNIMERCO.COM

BRIGHT

GALV.

· Tel. +45 97 14 14 40

STAINLESS A4

POLYESTER

www.tjep.eu

5

RE- bar binders

ACCESSORIES RE - BAR

TJEP LITHIUM ‑ ION BATTERY 4,0AH

TJEP BATTERY CHARGER FOR TJEP ULTRA GRIP

Item no.

124204

Item no.

124205

EAN no.

5702551242049

EAN no.

5702551242056

TJEP HOLSTER

TJEP EXTENSION BAR

Item no.

124203

Item no.

124202

EAN no.

5702551242032

EAN no.

5702551242025

All prices are suggested resale prices and stated in EUR excl. VAT.

6

www.tjep.eu

K YOCER A UNIMERCO Fastening A /S ·

Drejervej 2, DK-7451 Sunds

RE- BA R CUTTERS

RO D C U T T ER TJE P RC20 A

BATTERY- POWERED

ROD CUTTER

TJEP RC20A

Powerful cutting machine for flush cutting of re-bars.

Cuts off the re-bars close to the concrete surface.

Also suitable for cutting pipes and threaded rods without leaving burrs.

Incl. 2 blades, s and charger!

2 × 4 Ah batterie

KEY PRODUCT FEATURES

▪ Minimum of sparks ▪ Bag for collecting burrs ▪ Rod cutting of re-bars up to Ø20 mm ▪ Fast and efficient ▪ Low weight ▪ Removable side handle

Also available in 30 mm

All prices are suggested resale prices and stated in EUR excl. VAT.

TJEP@K YOCER A-UNIMERCO.COM

· Tel. +45 97 14 14 40

www.tjep.eu

7

RE- BA R CUTTERS

‑bars e r f o g tin Rod cut 30 mm up to Ø

kg !

5 .

3 y l n o Fast and

Video

Video

TJEP RC20A

TJEP RC30A

Bag for collecting burrs

Minimum of sparks

Low weight, fast and efficient

Low weight, fast and efficient

Removable side handle

Removable side handle

SPECIFICATIONS

SPECIFICATIONS

Item no.

102944

Item no.

102946

EAN no.

5702551029442

EAN no.

5702551029466

Size (L×W×H)

438 × 133 × 83 mm

Size (L×W×H)

445 × 133 × 83 mm

Weight

3.50 kg

Weight

3.50 kg

Workpc. thickness

10 - 20 mm

Workpc. thickness

10 - 30 mm

No-load blade speed

Max. 2.000 rpm

No-load blade speed

Max. 2000 rpm

Voltage

24V / 4Ah

Voltage

24V / 4Ah

2

2

1

1

ACCESSORIES

2

2

1

1

ACCESSORIES

Description

Item no.

Description

Item no.

TJEP Battery 4,0 Ah Li‑ion

103900

TJEP Battery 4,0 Ah Li‑ion

103900

TJEP battery charger for TJEP RC20A & RC30A

103965

TJEP battery charger for TJEP RC20A & RC30A

103965

TJEP RC20 Blade

102942

TJEP RC30 Blade

102948

USED FOR

USED FOR

Pipes, Rebar, Threaded rods.

Pipes, Rebar, Threaded rods.

All prices are suggested resale prices and stated in EUR excl. VAT.

8

www.tjep.eu

K YOCER A UNIMERCO Fastening A /S ·

Drejervej 2, DK-7451 Sunds

RE- BA R CUTTERS

ar b e r st s ! e g n ro ts clas t s e Th ter in i cut

le b a i l re d n a se ! g n Stro erhou pow

DIAMOND DC -16W

DIAMOND DC -20W

Cutting force: 13 t

Cutting force: 15 t

Cutting speed: approx. 2,5 sec.

Cutting speed: approx. 3 sec.

Cutter blades: Reversible

Cutter blades: Reversible

SPECIFICATIONS

SPECIFICATIONS

Item no.

102970

Item no.

102971

EAN no.

5702551029701

EAN no.

5702551029718

Size (L×W×H)

460 × 270 × 115 mm

Size (L×W×H)

500 × 150 × 135 mm

Weight

8.00 kg

Weight

10.50 kg

Workpc. thickness

0 - 16 mm

Workpc. thickness

0 - 20 mm

Steel strength

Max. 650 N / mm²

Steel strength

Max. 650 N / mm²

Motor power

1,050W / 230V

Motor power

2,500W / 230V

2

1

2

USED FOR

USED FOR

Rebar.

Rebar.

1

All prices are suggested resale prices and stated in EUR excl. VAT.

TJEP@K YOCER A-UNIMERCO.COM

· Tel. +45 97 14 14 40

www.tjep.eu

9

RE- BA R CUTTERS

Durable rebar cutter for flexible use!

ss r charge ! e l d r Co cut pe 100

TJEP C16A

TJEP C16A & TJEP C16

Cutting speed about 1 to 3 sec.

RE - BAR CUTTERS Powerful, quick and efficient cutting rebar

Bolt cutting head for efficient and economical cutting Durable rebar cutter for flexible use

SPECIFICATIONS Item no.

102998

EAN no.

5702551029985

Size (L×W×H)

490 × 395 × 135 mm

Weight

8.60 kg

Workpc. thickness

16 mm

Cutting force

17.4 t

Steel strength

Max. 650 N / mm²

Voltage

18V / 4Ah 2

2

1

1

ACCESSORIES Description

Item no.

Cutting blade, Higher

876866

Cutting blade, Lower

876864

USED FOR Rebar.

All prices are suggested resale prices and stated in EUR excl. VAT.

10

www.tjep.eu

K YOCER A UNIMERCO Fastening A /S ·

Drejervej 2, DK-7451 Sunds

Cu tte ran db en de rto ol!

R e- bar cut ters

ck andbar ! i u q , l e fu Poweer nt cutting r effici

RC -16BN

TJEP C16 Cutting speed about 1 to 3 sec.

Simple, fast and inexpensive

Bolt cutting head for efficient and economical cutting

Cuts and bend steel and re-bars, without tool change.

Non-return valve for safe and user-friendly cutting

Special designed head makes the knife last longer.

SPECIFICATIONS

SPECIFICATIONS

Item no.

102992

Item no.

102960

EAN no.

5702551029923

EAN no.

5702551029602

Size (L×W×H)

520 × 120 × 130 mm

Size

1320 × 120 mm

Weight

9.10 kg

Weight

14.00 kg

Workpc. thickness

16 mm

Workpc. thickness

16 mm

Cutting force

17.4 t

Cutting capacity

max. 16 mm 450 N / mm²

Steel strength

Max. 650 N / mm²

Bending capacity

max. 16 mm 450 N / mm²

Motor power

1,100W / 230V

Bending angle

max. 180°

Bending 1

max. 90°

Bending 2

max. 90°

1

ACCESSORIES Description

Item no.

Cutting blade, Higher

876866

Cutting blade, Lower

876864

USED FOR Rebar.

USED FOR Rebar.

All prices are suggested resale prices and stated in EUR excl. VAT.

TJEP@K YOCER A-UNIMERCO.COM

· Tel. +45 97 14 14 40

www.tjep.eu

11

DU PLE X

DUPLEX

Gas nailer with high impact force!

The gas nailer TJEP FH 21/90 Duplex is the latest 21° gas nailer in the TJEP range. With its high impact force it is ideal for nailing moulds, linings, flooring and sheet materials etc. The advantage of the nail gun is that it uses double-head nails, making it easier to pull out the nails. The nailer can also shoot 21° ring nails.

12

www.tjep.eu

K YOCER A UNIMERCO Fastening A /S ·

Drejervej 2, DK-7451 Sunds

Duplex

-15°

2

1

4 6

3

ails! n d a ‑he e l b u Fordo

5

TJEP FH 21/90 GAS 2G DUPLEX

TJEP FH DUPLEX NAILS, 21°

1

Rafter/belt hook

2

Non-slip grip

21°

3

Rear two-step loading

L: 50 - 90 mm Ø: 3.3 mm

4

Rubber pad – anti-skid

5

Adjustable depth control

6

Well-balanced

FH Duplex nails

WILL FIT TJEP

FH SMOOTH NAILS, DUPLEX, FULL HEAD

SPECIFICATIONS Item no.

100876

EAN no.

5702551008768

Nail length

50 - 90 mm

Size (L×W×H)

366 × 108 × 375 mm

Weight

3.53 kg 2

1

FH 21/90 GAS Duplex

Dimension

Item no.

Pcs./box

Box/pal.

FH 33/75

838990

2,000

60

FH 33/85

838992

2,000

60

1

ACCESSORIES Description

Item no.

Driver unit

875645

Driver unit

877601

Lockring for No‑mark

874763

No‑mark

876678

TJEP all‑season fuel cell, red ring, 165 mm

100856

TJEP fuel cell, orange ring, 165 mm

100853

USED FOR Shuttering.

BRIGHT

All prices are suggested resale prices and stated in EUR excl. VAT.

TJEP@K YOCER A-UNIMERCO.COM

· Tel. +45 97 14 14 40

www.tjep.eu

13

CO N CR ETE N AILERS

-15°

NEW

5

4

1

6

2

3

TJEP CP- 40 GAS 3G

TJEP CONDUITE STRAP

1

Compact design

2

Adjustable depth control

0°

3

Support bracket

L: 15 - 40 mm Ø: 2.6 - 3.0 mm

4

Battery indicator and quick charge function

5

Rafter/belt hook

6

Quick removal of ‘trapped’ brad

Conduite strap CPX Concrete Pins, p. 15

WILL FIT TJEP

CONDUITE STRAP

SPECIFICATIONS Item no.

100245

EAN no.

5702551002452

Nail length

15 - 40 mm

Size (L×W×H)

327 × 130 × 385 mm

Weight

3.80 kg 2

CP-40 GAS

Dimension

Item no.

Pcs./box

Box/crt.

Conduite strap 16 mm

839616

100

10

Conduite strap 20 mm

839620

100

10

Conduite strap 25 mm

839625

100

10

1

1

ACCESSORIES Description

Item no.

Long magazine

878165

Magnetic no‑mark

875795

TJEP all‑season fuel cell, red ring, 165 mm

100856

TJEP fuel cell, orange ring, 165 mm

100853

USED FOR Drywall steel rails, Pre-fab, Shuttering.

Long magazine for CP-40 GAS 3G Item no. 878165 All prices are suggested resale prices and stated in EUR excl. VAT.

14

www.tjep.eu

K YOCER A UNIMERCO Fastening A /S ·

Drejervej 2, DK-7451 Sunds

CO N CR ETE N AILERS

TJEP CPX CONCRETE PINS, 0° WILL FIT TJEP

CP-40 GAS, CP-40

CPX CONCRETE PIN, FULL HEAD, WITH FIRE PROTECTION

CPX STEEL-/CONCRETE PIN, FULL HEAD, WITH FIRE PROTECTION

Dimension

Item no.

Pcs./box

Box/crt.

Dimension

Item no.

Pcs./box

Box/crt.

CPX 26/16*

839216

500

CPX 26/20*

839219

500

10

CPX 30/15*

839215

500

10

10

CPX 30/20*

839220

500

10

CPX 26/25*

839224

CPX 26/30*

839229

500

10

CPX 30/25*

839225

500

10

500

10

CPX 30/30*

839230

500

10

CPX 26/35*

839234

500

10

CPX 30/35*

839235

500

10

CPX 26/40*

839239

500

10

*With fire protection evaluation approval

*With fire protection evaluation approval

CPX STEEL-/CONCRETE PIN, FULL HEAD, WITHOUT FIRE PROTECTION

CPX CONCRETE PIN, FULL HEAD, WITHOUT FIRE PROTECTION

Dimension

Item no.

Pcs./box

Box/crt.

Dimension

Item no.

Pcs./box

Box/crt.

CPX 30/15* **

839296

500

10

CPX 27/16* **

839290

500

10

CPX 30/20* **

839297

500

10

CPX 27/20* **

839291

500

10

CPX 30/25* **

839298

500

10

CPX 27/25* **

839292

500

10

CPX 30/30* **

839299

500

10

CPX 27/30* **

839293

500

10

CPX 30/35* **

839300

500

10

CPX 27/35* **

839294

500

10

CPX 27/40* **

839295

500

10

GALV.

MECH. GALV.

*Without fire protection evaluation approval **Introduced in 2022

*Without fire protection evaluation approval **Introduced in 2022

All prices are suggested resale prices and stated in EUR excl. VAT.

TJEP@K YOCER A-UNIMERCO.COM

· Tel. +45 97 14 14 40

www.tjep.eu

15

6 4

5

3 2

1

Li‑ion battery –approx.8000shotspercharge

TJEP ST-15/50 GAS 3G

TJEP ST-15/50 GAS 3G

CONCRETE FINISH NAILER

Smart design.

Excellent ergonomics and balance.

Long battery lifetime with Li-Ion.

1

No-mark nose

2

Safety bracket integrated in nose

0°

3

Adjustable depth control

L: 15 - 50 mm Ø: 1.8 mm

4

Non-slip grip

5

Rafter/belt hook

6

Battery indicator and quick charge function

ST-50 Concrete Nails, p. 17

SPECIFICATIONS Item no.

100240

EAN no.

5702551002407

Brads length

15 - 50 mm

Size (L×W×H)

350 × 86 × 286 mm

Weight

2.30 kg 2

1

1

ACCESSORIES

QUICK - GUIDE

CHOOSE THE CORRECT FINISH NAILS Item no.

Finish nail length

Workpc. thickness

842220

20 mm

10 - 14 mm

842225

25 mm

14 - 18 mm

842230

30 mm

18 - 25 mm

842235

35 mm

25 - 30 mm

842240

40 mm

30 - 35 mm

842250

50 mm

40 - 45 mm

842262

Assortment (20-50 mm)

See above

Description

Item no.

Driver unit

877373

No‑mark

877380

TJEP fuel cell, yellow ring, 78 mm

100881

USED FOR Architraves, Skirting.

Recommended finish nail lengths – may vary depending on stone / concrete quality, strength and age.

16

www.tjep.eu

K YOCER A UNIMERCO Fastening A /S ·

All prices are suggested resale prices and stated in EUR excl. VAT.

Drejervej 2, DK-7451 Sunds

Concrete nailers

l nails e e t s d e n e Hard ! for concrete

te!

Forbricksandconcre

Ø: 1.8 mm

5 3

6 4 1

grated in the Safety bracket inte ct nose ensures exa nail. positioning of the

2 1

TJEP ST-15/50

TJEP ST- 50 CONCRETE NAILS, 0° 1

Safety bracket integrated in nose

2

No-mark nose

0°

3

Exhaust in bottom cover

L: 15 - 50 mm Ø: 1.8 mm

4

Adjustable depth control

5

Non-slip grip

6

Dry fire lock-out

ST-50 Concrete Nails

WILL FIT TJEP

ST-15/50 GAS, ST-15/50, ST-50 concrete

ST-50 FINISH NAILS

SPECIFICATIONS

Dimension

Item no.

Pcs./box

Box/crt.

ST-50, 20 mm

842220

3,000

10

ST-50, 25 mm

842225

3,000

10

Item no.

100426

ST-50, 30 mm

842230

3,000

10

EAN no.

5702551004265

ST-50, 35 mm*

842235

1,500

10

Finish length

15 - 50 mm

ST-50, 40 mm

842240

1,500

10

Air consumption per cycle

1.2 litres

ST-50, 50 mm

842250

1,500

10

Size (L×W×H)

271 × 73 × 254 mm

Weight

1.50 kg

*Do not fit ST-15/50

ST-50 FINISH NAILS, ASSORTMENT 1

ACCESSORIES Description

Item no.

Driver unit

874616

No‑mark set, green

871077

No‑mark set, orange

871076

Spare parts set

871066

Dimension

Item no.

Pcs./box

Box/crt.

ST-50

842262

2,400

10

USED FOR Architraves, Skirting.

400 of each length: 20, 25, 30, 35, 40 & 50 mm

GALV.

All prices are suggested resale prices and stated in EUR excl. VAT.

TJEP@K YOCER A-UNIMERCO.COM

· Tel. +45 97 14 14 40

www.tjep.eu

17

PR

HIGH

E

HIG H PRESSU RE

R

ES U S

3 5

1

6

2

4

MAKITA AN250HC HP CONCRETE

QUICK- GUIDE

CHOOSE THE RIGHT CONCRETE PINS/NAILS

1

Lightweight and handy

2

Powerful

0°

3

Rubber handle

L: 15 - 25 mm Ø: 3.0 mm

4

Small nose – only 19 mm

5

Rubber edges protect against cracks and damages

6

Rotatable belt hook

CPPW Concrete Pins, p. 19

CONCRETE - ALL CPX PINS

SPECIFICATIONS

Thickness of application

Concrete

Approx. 20 mm depth of drive

Pin length

STEEL (>3 MM) - CPX 3.0 + CPPW PINS

Steel

(>3 mm)

STEEL (1-4 MM) - FB NAILS + CPPW TWISTED

Item no.

100195

EAN no.

0088381605106

Nail length

15 - 25 mm

Size (L×W×H)

295 × 128 × 291 mm

Weight

2.10 kg 1

ACCESSORIES Description

Item no.

No‑mark set

899645

TJEP HP airhose, 15 m

123089

TJEP HP hose reel, 30 m

123090

TJEP HP swivel plug 360°

123084

USED FOR Drywall steel rails, Pre-fab.

Thickness of application

Steel

(1-4 mm)

10 mm depth of drive

Nail length

For more information please visit www.tjep.eu All prices are suggested resale prices and stated in EUR excl. VAT.

18

www.tjep.eu

K YOCER A UNIMERCO Fastening A /S ·

Drejervej 2, DK-7451 Sunds

HIG H PRESSU RE

r e h s wa c i t s la rete ! p h t Wi or conc –f

Ø: 3.4 mm HIGH

E

PR

ES U S

R

ES U S

TJEP CPPW CONCRETE PINS, 0°

TJEP CPPW CONCRETE PINS, 0°

WILL FIT MAKITA

R

PR

HIGH

E

Ø: 3.0 mm

WILL FIT MAX

AN250HC HP concrete

CPPW CONCRETE-/STEELPIN

HN120

CPPW CONCRETE-/STEELPIN, STEPPOINT

Dimension

Item no.

Pcs./box

Box/pal.

Dimension

Item no.

Pcs./box

Box/pal.

CPPW 30/15

839278

1,000

240

CPPW 34/30

839504

1,000

96

CPPW 30/19

839280

1,000

240

CPPW 34/35

839507

1,000

96

CPPW 30/22

839282

1,000

240

CPPW 34/50

839510

1,000

96

CPPW 30/25

839284

1,000

240

CPPW TWISTED CONCRETE-/STEELPIN Dimension

Item no.

Pcs./box

Box/pal.

CPPW 34/38*

839522

1,000

96

CPPW 34/50*

839524

1,000

96

CPPW 34/65*

839526

1,000

96

*Mounting on a foundation of 1-4 mm steel or on concrete.

GALV.

All prices are suggested resale prices and stated in EUR excl. VAT.

TJEP@K YOCER A-UNIMERCO.COM

· Tel. +45 97 14 14 40

www.tjep.eu

19

E

HIGH

PR

R

ES U S

TJEP CPAW CONCRETE PINS, 0°

TJEP FB NAILS, 15°

WILL FIT MAX

R

PR

HIGH

ES U S

E

HIG H PRESSU RE

WILL FIT MAKITA

HN120

CPAW CONCRETE-/STEELPIN, FULL HEAD

AN610H HP, AN711H HP

FB STEEL NAIL, FULL HEAD

Dimension

Item no.

Pcs./box

Box/pal.

Dimension

Item no.

Pcs./box

Box/pal.

CPAW 34/19

839248

1,000

96

FB 23/30*

839538

6,000

40

FB 29/38*

839540

6,000

40

*With CE approval EN 14566

FB STEEL NAIL, FULL HEAD

All prices are suggested resale prices and stated in EUR excl. VAT.

20

www.tjep.eu

K YOCER A UNIMERCO Fastening A /S ·

Dimension

Item no.

Pcs./box

Box/pal.

FB 25/27

839548

3,600

100

STAINLESS (130M)

MECH. GALV.

GALV. 12µ+

Drejervej 2, DK-7451 Sunds

HIG H PRESSU RE

HIGH PRESSURE THE

»ORANGE« FROM TJEP

Specially developed for hard drywall Recommended by leading manufacturers

TJEP HP COIL SCREW

32 mm or 41 mm, 2.000 pcs., Orange Dura, CE-marked according to EN 14566 3,9/32 Item no. 839966

3,9/41 Item no. 839968

SCREWDRIVER

MAKITA AR411HR HP

HIGH

Item no 100198

PR

E

Small og handy for mounting plasterboard using plast-collated screws. Low weight. Adjustable depth control.

Screw length: 25-41 mm

TJEP@K YOCER A-UNIMERCO.COM

· Tel. +45 97 14 14 40

www.tjep.eu

R

ES U S

21

E

HIGH

PR

ES U S

R

ES U S

R

PR

HIGH

E

Hig h Pressure

4

5

3

2

1

MAKITA AR411HR HP 1

No-mark nose

2

Adjustable depth control

0°

3

Rotatable belt hook

L: 25 - 41 mm Ø: 3.5 - 3.9 mm

4

Rubber handle

5

Low weight

HP Screws

TJEP HP SCREWS, 0° WILL FIT MAKITA

HP SCREWS FINE THREAD, HARD DRYWALL

SPECIFICATIONS Item no.

100198

EAN no.

0088381641173

Skrew Length

25 - 41 mm

Size (L×W×H)

276 × 120 × 316 mm

Weight

2.00 kg

AR411HR HP

Dimension

Item no.

Pcs./box

Box/pal.

HP 3,9/32*

839966

2,000

128

HP 3,9/41*

839968

2,000

112

*With CE approval EN 14566

HP SCREWS COMBI, DRYWALL/STEEL/WOOD

1

ACCESSORIES Description

Item no.

No‑mark set

899652

TJEP HP airhose, 15 m

123089

TJEP HP hose reel, 30 m

123090

Dimension

Item no.

Pcs./box

Box/pal.

HP 3,9/28*

839987

2,000

128

HP 3,9/32*

839983

2,000

128

HP 3,9/41*

839985

2,000

112

*With CE approval EN 14566

USED FOR Plasterboard.

All TJEP nails for bearing structures are CE-marked.

CE-marked according to EN 14592 / EUROCODE 5.

All prices are suggested resale prices and stated in EUR excl. VAT.

22

www.tjep.eu

K YOCER A UNIMERCO Fastening A /S ·

BLACK PHOSPHATE

Drejervej 2, DK-7451 Sunds

OR ANGE DUR A

SERVICE

www.tjep.eu/service

SERVICE & REPAIRS All tools supplied by TJEP are quality products, that are manufactured from highgrade materials and are subject to stringent checks with a view to ensuring that the tools can be used for many years without problems. However, professional service and maintenance of your tools are necessary to ensure effective and continuous operation on the construction site.

We have serviced and repaired Pneumatic nailers, gas-operated nailers and re-bar tiers for more than 50 years. That’s why, in terms of providing servicing for a very wide selection of tools such as those supplied by TJEP, Paslode, DUO-FAST and MAX tools, we have the most experience in the industry.

Where should tools be sent to?

Authorised TJEP service workshop

Kyocera Unimerco Fastening A/S, Drejervej 2, DK-7451 Sunds Tel. +45 97 14 14 40

The servicing workshop gathers this experience from the servicing of many thousands of tools every year and compares it with the technical developments in tool manufacture.

This experience and continuous technical updating means, that you are always ensured of competent service of your tools – in brief, when your tool is returned to you, you can be sure that it is fully functional.

It is important to note that you should only use nails, brads and fasteners that comply with the specifications laid down for the tool in question. If fasteners are used, that do not fulfill the specifications for the tool in question, it may be dangerous to use the tool and there is a risk that accidents involving personal injury may occur.

Should the tool be sent for service?

We have a dedicated team ready to service your tools, but as there are many issues that can be resolved over the telephone, we recommend that you call us on one of the contact numbers on this page, before you send the tool for repair. By doing so, you avoid being without the tool unnecessarily.

TJEP@K YOCER A-UNIMERCO.COM

TJEP/MAKITA NAILERS

TJEP HP COMPRESSOR*

Kyocera Unimerco Fastening A/S, Drejervej 2, DK-7451 Sunds Tel. +45 97 14 14 40

TJEP RE - BAR BINDERS

Kyocera Unimerco Fastening A/S, Drejervej 2, DK-7451 Sunds Tel. +45 97 14 14 40

*(TJEP 9/20 HP, Item No. 123074)

· Tel. +45 97 14 14 40

www.tjep.eu

23

SERVICE

FOR TECHNICAL ADVICE AND SERVICE

– CALL +45 97 14 14 40 Andy Schenk Export Sales Manager

Claudia Byskov Export Sales

Tel. +45 60 38 10 32 asc@kyocera-unimerco.com

Tel. +45 96 29 24 36 cby@kyocera-unimerco.com

Cécilia Vadé Export Sales Tel. +45 96 29 24 84 cva@kyocera-unimerco.com

Claus Mølgaard Technical Coordinator clm@kyocera-unimerco.com

Jörg Ahrendt Technical Support

Jannik Emmervadt Internal Sales Manager

jrg@kyocera-unimerco.com

jnk@kyocera-unimerco.com

Ebbe Hornstrup Operations Director

Jesper Tordrup Andersen Director, Fastening Division

erh@kyocera-unimerco.com

jta@kyocera-unimerco.com

All prices are suggested resale prices and stated in EUR excl. VAT. Valid from September 1, 2022 and until the next edition.

The applicable terms and conditions may be found at www.tjep.eu.

Subject to misprints, price changes and availability.

KYOCERA UNIMERCO Fastening A/S Drejervej 2 · DK-7451 Sunds Tel. +45 97 14 14 40 tjep@kyocera-unimerco.com www.tjep.eu