Inspection and measuring | Technological solutions

©Tekniker 2020

TECHNOLOGICAL SOLUTIONS

INSPECTION AND MEASURING DEVELOPING A TECHNOLOGICAL OFFER

© ©Tekniker Tekniker 2020 2020

TECHNOLOGICAL SOLUTIONS

MECHATRONIC SYSTEMS

INDUSTRIAL MAINTENANCE

INDUSTRIAL ROBOTICS AND AUTOMATION

INSPECTION AND MEASURING

MULTIFUNCTIONAL SURFACES

SENSOR DEVICES

INNOVATION AND COMPETITIVE INTELLIGENCE

ADVANCED MANUFACTURING

MECHANICAL COMPONENTS IN USE

MECHATRONIC SYSTEMS

INDUSTRIAL MAINTENANCE

INDUSTRIAL ROBOTICS AND AUTOMATION

INSPECTION AND MEASURING

MULTIFUNCTIONAL SURFACES

SENSOR DEVICES

INNOVATION AND COMPETITIVE INTELLIGENCE

ADVANCED MANUFACTURING

TECHNOLOGICAL SOLUTIONS

© Tekniker 2020

INSPECTION AND MEASURING Transforming the degree of specialization achieved in terms of scientific-Technological development within the scope of a revised and updated supply so it can be transferred to the industrial environment in the form of an inspection and measuring solution.

MECHANICAL COMPONENTS IN USE

INSPECTION AND MEASURING

INTEGRAL SOLUTION

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING SYSTEMS

S2

S1

©Tekniker 2020

S5

LARGE SCALE METROLOGY

S3 MONITORING AND CONTACTLESS REGISTER

IN-PROCESS INSPECTION AND METROLOGY

DEVELOPMENT OF MEASURING EQUIPMENT

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

S6

S4 CONSULTANCY, TRAINING AND DISSEMINATION

S7

S8

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING SYSTEMS

S2

S1

©Tekniker 2020

S5

LARGE SCALE METROLOGY

S3 MONITORING AND CONTACTLESS REGISTER

IN-PROCESS INSPECTION AND METROLOGY

DEVELOPMENT OF MEASURING EQUIPMENT

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

S6

S4 CONSULTANCY, TRAINING AND DISSEMINATION

S7

S8

INSPECTION AND MEASURING

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING RESOURCES

Scope Verification, calibration and ENAC certification of machine tools, coordinate measuring machines and mechanical precision systems pursuant to current standards.

Market Solution • Quality: To monitor production and measuring resources.

• ENAC certification.

• Software for on-line management of calibration plans.

©Tekniker 2020

• Counselling on data interpretation and technical aid in audits.

INSPECTION AND MEASURING

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING RESOURCES

Know How

Technology

• Standards: ISO 230, ISO TR 16907, VDI 3441 and ISO 10360.

• Hardware: Interferometry, calibration squares, probing stylus, autocollimator, laser tracker, laser tracer and electronic levels.

• Verification know-how (direct and indirect) and compensation procedures.

• Software: Commercial software for measuring equipment and self-developed software at IK4-TEKNIKER to enhance equipment capacity.

• Measuring and production resources: Knowledge related to the hardware and software of the systems to be verified.

©Tekniker 2020

CASE STUDY Volumetric error mapping of machine tool through simultaneous multilateration

SCOPE OF APPLICATION Metrology for machine-tool precision enhancement

Calibración de máquinas de medir por coordenadas con tecnología láser

INSPECTION AND MEASURING

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING RESOURCES

Errores en el volumen XYZ(um)

5000

Posición Z(mm)

4000 3000 2000 1000 0 ­1000 0 ­1000 ­2000 Posición Y(mm)

0

500

1000

1500

2000

Posición X(mm)

Volumetric error mapping and compensation

©Tekniker 2020

Geometric error mapping

GEOMETRIC VERIFICATION OF MACHINE TOOLS AND COORDINATE MEASURING MACHINES

Developing of new measurement procedures

INSPECTION AND MEASURING

©Tekniker 2020

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING RESOURCES

MACHINE TOOL ASSEMBLE PROCESS ASSESSMENT WITH LASER TRACKER

From the very beginning to the final step of the assemble process

INSPECTION AND MEASURING

©Tekniker 2020

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING RESOURCES

COORDINATE MEASURING MACHINE CERTIFICATION WITH LASER TRACER TECHNOLOGY TO ISO 10360

Software self-development for measurement assessment

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING SYSTEMS

S2

S1

©Tekniker 2020

S5

LARGE SCALE METROLOGY

S3 MONITORING AND CONTACTLESS REGISTER

IN-PROCESS INSPECTION AND METROLOGY

DEVELOPMENT OF MEASURING EQUIPMENT

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

S6

S4 CONSULTANCY, TRAINING AND DISSEMINATION

S7

S8

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

Scope Calibration and ENAC certification of components, measuring systems and standard industrial patterns.

Comprehensive management of the calibration plan.

What for • Quality: Monitoring and traceability of components, measuring systems and metrological patterns.

• Technological scope: measuring and calibration capabilities featuring uncertainty at a state of the art level.

• ENAC certification.

©Tekniker 2020

• Software for on-line management of calibration plans.

• Counselling on data interpreting and technical aid in audits.

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

Know how

Technology

• Standards: An extensive range.

• Hardware: Dimensional patterns and calibration facilities for industrial measuring systems, coordinate measuring machines Zeiss UPMC, 1D SIP, roundness machines, roughness and profile testers.

• Very accurate and specific verification and calibration know-how. Specific measuring procedures.

• Precision: Certified laboratory with cutting-edge measuring and calibration capabilities (CMC).

• Customer management

• Software: Commercial software for each hardware + metrology asset management software (Gespro servicios and TEKALNET).

• Uncertainty: Significant expertise in uncertainty allocation procedures.

©Tekniker 2020

CASE STUDY Medición dimensional de ultraprecisión

SCOPE OF APPLICATION

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

Management module MANAGING DOCUMENTATION AND PLANNING CALIBRATIONS •

Equipment files.

•

Calibration records.

•

Maintenance records.

•

Creation of labels.

•

Extensive filter options.

•

Creation of listings according to filters.

Calibration module

©Tekniker 2020

CALIBRATION AND EQUIPMENT MAINTENANCE REGISTER

TEKALNET METROLOGY ASSET MANAGEMENT SOFTWARE TEKALNET

•

Automatic management of pattern uncertainty.

•

Calibration results register.

•

Calculation of uncertainties according to current standards.

•

Creation of certificates.

•

Automatic criteria compliance checking.

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

©Tekniker 2020

ENAC certification and strong partnership with spanish metrology institute.

STATE OF THE ART IN CALIBRATION AND MEASURMENT CAPABILITIES (CMC) FOR DIMENSIONAL METROLOGY

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING SYSTEMS

S2

S1

©Tekniker 2020

S5

LARGE SCALE METROLOGY

S3 MONITORING AND CONTACTLESS REGISTER

IN-PROCESS INSPECTION AND METROLOGY

DEVELOPMENT OF MEASURING EQUIPMENT

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

S6

S4 CONSULTANCY, TRAINING AND DISSEMINATION

S7

S8

INSPECTION AND MEASURING

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

Alcance 3D verification and calibration of parts and components. From the micro to the macro scale.

What for • Quality: Monitoring and traceability of components, parts and industrial assemblies in a 3D environment.

• Technological scope: Verification and calibration capabilities featuring uncertainty at a state of the art level. From the micro to the macro scale.

• Counselling on data interpreting and technical aid in audits.

©Tekniker 2020

• Software for online management of calibration plans.

INSPECTION AND MEASURING

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

Know how

Tecnología

•

Standards: Coverage of an extensive range of standards.

•

•

Very precise and specific 3D verification and calibration know-how. Specific measuring procedures for customers' laboratories and facilities.

•

From the micro to the macro scale.

•

Result output: Dimensional analysis, CAD comparative and reverse engineering.

•

Precision: A certified laboratory with cutting-edge measuring and calibration (CMC) capabilities.

Hardware: MMC Zeiss F25, MMC Zeiss UPMC Carat 850, M3 by Innovalia, laser trackers, photogrammetry equipment and GOM ATOS scanning system, 3D optical SENSOFAR profilometer, technologies for the micro-nano scale (ZEISS SEM, white light interferometry, …)

•

Customer management and support in audits.

•

•

Sectors: Extensive knowledge in terms of market and industrial sector requirements.

•

Uncertainty: High-level expertise in uncertainty allocation procedures. Simulation tool to reduce uncertainties.

Software: Commercial software (Calypso, Spatial Analyzer, GOM Inspect, Metrolog X4…) + metrology asset management software (Gespro servicios and TEKALNET)

SCOPE OF APPLICATION

©Tekniker 2020

CASE STUDY Photogrammetry measurement

Scanning measurement

INSPECTION AND MEASURING

©Tekniker 2020

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

MEASURING TECHNOLOGIES AND PROCEDURES FOR ULTRA-PRECISE MEASUREMENT

Perfilometer

Coordinate measurement machine - ZEISS UPMC CARAT

Coordinate measurement machine - ZEISS O INSPECT

Scanning system ATOS TRIPLESCAN

Micro coordinate measurement machine ZEISS F25

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING SYSTEMS

S2

S1

©Tekniker 2020

S5

LARGE SCALE METROLOGY

S3 MONITORING AND CONTACTLESS REGISTER

IN-PROCESS INSPECTION AND METROLOGY

DEVELOPMENT OF MEASURING EQUIPMENT

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

S6

S4 CONSULTANCY, TRAINING AND DISSEMINATION

S7

S8

INSPECTION AND MEASURING

LARGE SCALE METROLOGY

Scope Verification of large-scale systems, toolings and assemblies.

What for • Anticipation: Planning and simulation of the measurements at customer's facilities.

• Technology: Measuring and verification capabilities within micrometric uncertainty for large scale applications (from 2 m3 to dozens of meters).

• Risk reduction: Technical aid and assistance in manufacturing and assembly process.

• A wide range of large scale applications.

©Tekniker 2020

• Counselling on data interpretation and technical assistance for audits.

INSPECTION AND MEASURING

LARGE SCALE METROLOGY

Know how

Technology

• • • • • • • • • •

• Hardware: Laser trackers and laser scanner, ETALON AG tracer laser, GOM photogrammetry and digitising systems.

Simulation of the measuring process.

Definition of the customized measuring procedure.

Dimensional verification of large scale components.

Automate inspection tasks.

Assistance for alignment and assembly.

Static and dynamic structural monitoring.

Uncertainty assessment to measurements (GUM).

Experience in audits with end customers.

Developing/integrating customized systems and software.

Monitoring & compliance of standards.

SCOPE OF APPLICATION

©Tekniker 2020

CASE STUDY Large Scale Metrology: LSST Camera cable wrap requirements verification

• Software: Metrolog X4, Spatial Analyzer, GOM Inspect, Pro-agilis…

Volumetric error mapping of machine tool through simultaneous multilateration

INSPECTION AND MEASURING

LARGE SCALE METROLOGY

White-light scanner

©Tekniker 2020

Laser-tracker

Inspection software

Laser-scanner

Close range photogrammetry

INSPECTION AND MEASURING

©Tekniker 2020

LARGE SCALE METROLOGY

DIMENSIONAL VERIFICATION OF LARGE SCALE COMPONENTS

Raw part

INSPECTION AND MEASURING

©Tekniker 2020

LARGE SCALE METROLOGY

DIMENSIONAL VERIFICATION OF LARGE SCALE COMPONENTS

Machined part

INSPECTION AND MEASURING

LARGE SCALE METROLOGY

Dimensional analysis

©Tekniker 2020

CAD Comparison

CUSTOMIZED RESULTS FOR QUALITY ASSESSMENT

TRANSFORMATION Tz Rx (º) Ry (º) (mm)

Position

Tx (mm)

Ty (mm)

15 - 1

0,359

0,632

-0,584

-0,042

30 - 1

0,217

0,661

-0,580

45 - 1

0,094

0,620

60 - 1

0,002

75 - 1 90 - 1

RESULTS Offset Tilt error error

Rz (º)

Rotation range

-0,060

14,80 1

OK

0,727

0,073

-0,028

0,003

29,79 8

OK

0,696

0,028

-0,576

-0,003

0,062

44,79 7

OK

0,627

0,062

0,532

-0,573

0,035

0,113

59,79 9

OK

0,532

0,118

0,164

0,456

-0,547

0,091

0,150

74,80 4

OK

0,485

0,175

0,263

0,413

-0,520

0,153

0,166

89,80 2

OK

0,490

0,226

Drive alignment

INSPECTION AND MEASURING

Advanced simulation with Spatial Analyzer

©Tekniker 2020

LARGE SCALE METROLOGY

SIMULATION FOR CUSTOMIZED MEASUREMENT STRATEGY DEFINITION

Automatic measuring processes

INSPECTION AND MEASURING

©Tekniker 2020

LARGE SCALE METROLOGY

SIMULATION FOR CUSTOMIZED MEASUREMENT STRATEGY DEFINITION

Pointing requirement assessment for the LSST project

INSPECTION AND MEASURING

LARGE SCALE METROLOGY Large-scale scenarios

©Tekniker 2020

Robot error mapping

ADDITIONAL SKILLS

Support to the asemble process

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING SYSTEMS

S2

S1

©Tekniker 2020

S5

LARGE SCALE METROLOGY

S3 MONITORING AND CONTACTLESS REGISTER

IN-PROCESS INSPECTION AND METROLOGY

DEVELOPMENT OF MEASURING EQUIPMENT

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

S6

S4 CONSULTANCY, TRAINING AND DISSEMINATION

S7

S8

INSPECTION AND MEASURING

DEVELOPMENT OF MEASURING EQUIPMENT

Scope Development, manufacturing and turnkey delivery of scientific and measuring equipment.

What for • Unique, state of the art measuring equipment.

• Technical comparisons of measuring outcomes and procedures.

• Multi-disciplinarity in technologies and techniques related to the design and fine-tuning of measuring equipment.

©Tekniker 2020

• Proven experience in international projects: Telescopes, manufacture of national measuring patterns…

INSPECTION AND MEASURING

DEVELOPMENT OF MEASURING EQUIPMENT

Know how

Technology

• Monitoring and acquisition of new technologies.

• Precision positioning (actuators, closed loop control).

• Precision mechanics and electronics.

• Interaction with devices (CNCs, MMC, Robots, laser trackers, level gauges, autocollimators, interferometers…).

• Systems integration.

• High-level functionalities (image processing, 3D cloud processing…).

• Simulation capacity.

• Modelling and inverse problem solving.

• Aerostatic guiding, motors, interferometry…

• Development of customized software and interfaces.

• Image processing.

©Tekniker 2020

CASE STUDY Development of the Spanish national pressure standard for the National Metrology Institute (CEM)

SCOPE OF APPLICATION Calibration system for angle measurement

INSPECTION AND MEASURING

NEW MEASUREMENT EQUIPMENT VALUE CHAIN PROCESS

1

2

EXPERTISE IN THE STATE OF ART

5

6

©Tekniker 2020

VALIDATION (TEST PLAN ACCORDING TO INITIAL REQUIREMENTS)

7

MEASUREMENT CONCEPT AND PRINCIPLES SKETCH

COMPONENT MANUFACTURE AND ASSEMBLE

TURNKEY SOLUTION

3 FIRST PROTOTYPE (TECHNICAL RISK ASSESSMENT)

4 DESIGN IMPROVEMENT

(ACCORDING TO TEST RESULTS WITH PROTOTYPE)

INSPECTION AND MEASURING

©Tekniker 2020

DEVELOPMENT OF MEASURING EQUIPMENT

CALIBRATION SYSTEM FOR ANGULAR MEASUREMENT (Large range small angle generator)

Result of European Project “Angles”

INSPECTION AND MEASURING

DEVELOPMENT OF MEASURING EQUIPMENT

©Tekniker 2020

IN COLLABORATION WITH

ULTRAPRECISION LINEAR TEST BENCH

Measurement uncertainty= 10 nm/m

INSPECTION AND MEASURING

Pressure calibration standard

DEVELOPMENT OF MEASURING EQUIPMENT

©Tekniker 2020

Radiation calibration standard

DEVELOPMENT OF STATE OF ART MEASUREMENT STANDARDS FOR SPANISH METROLOGY INSTITUTE

Ultraprecision calibration linear bench

INSPECTION AND MEASURING

DEVELOPMENT OF MEASURING EQUIPMENT

©Tekniker 2020

Non-contact measurement system - iLine

DEVELOPMENT OF CUSTOMIZED MEASUREMENT EQUIPMENT

Non-contact 100 % in line measurement system - LAZPIUR

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING SYSTEMS

S2

S1

©Tekniker 2020

S5

LARGE SCALE METROLOGY

S3 MONITORING AND CONTACTLESS REGISTER

IN-PROCESS INSPECTION AND METROLOGY

DEVELOPMENT OF MEASURING EQUIPMENT

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

S6

S4 CONSULTANCY, TRAINING AND DISSEMINATION

S7

S8

INSPECTION AND MEASURING

IN-PROCESS INSPECTION AND METROLOGY Scope Development and integration of measuring and inspection solutions in manufacturing processes.

What for • Increase of functionalities and productivity of production resources and manufacturing processes.

• A technical comparison of measuring results and procedures.

• Multidisciplinarity in technologies and techniques used to incorporate a solution to a machine and process.

• A variety of manufacturing processes and production resources.

©Tekniker 2020

• Proven experience in multidisciplinary technological projects.

INSPECTION AND MEASURING

IN-PROCESS INSPECTION AND METROLOGY Know how

Tecnología

•

Industrial manufacturing processes: moulding, shaping, stock removal, addition of materials and surface treatments.

•

Acquisition technology (point to point sensors, line and structured light scanner).

•

Robotics, contactless inspection techniques.

•

•

Measuring and production resources.

Interaction with devices (CNCs, CMM, robots, laser trackers, level gauges, autocollimators, interferometers…).

•

Simulation capacity.

•

•

Modelling defectology.

High-level functionalities (image processing, 3D cloud processing…).

•

Thermal scenarios.

•

Robotic platforms.

•

Modelling and inverse problem solving.

•

Contactless acquisition systems (matrix, linear, stereoscopic cameras …).

•

CNCs, machine tools and CMM platforms.

•

Software by vision (OpenCV, Halcon, MIL).

•

Developing customized software.

•

Integrating sensors and measuring devices.

©Tekniker 2020

CASE STUDY Bi-manipulator industrial robot

SCOPE OF APPLICATION Dual arm robotics for aeronautic component assembly

INSPECTION AND MEASURING

IN-PROCESS INSPECTION AND METROLOGY

Large-size components

©Tekniker 2020

Medium-size components

MEASURING CAPABILITY ASSESSMENT FOR MACHINE TOOLS

INSPECTION AND MEASURING

IN-PROCESS INSPECTION AND METROLOGY

©Tekniker 2020

Integration of measurement systems into productive systems

CONTACTLESS INPROCESS MEASUREMENT AND INSPECTION ASSESSMENT

Real-time quality control

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING SYSTEMS

S2

S1

©Tekniker 2020

S5

LARGE SCALE METROLOGY

S3 MONITORING AND CONTACTLESS REGISTER

IN-PROCESS INSPECTION AND METROLOGY

DEVELOPMENT OF MEASURING EQUIPMENT

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

S6

S4 CONSULTANCY, TRAINING AND DISSEMINATION

S7

S8

INSPECTION AND MEASURING

MONITORING AND CONTACTLESS REGISTER

Scope Monitorización y registro sin contacto en diversas aplicaciones.

What for • Detecting, monitoring and locating people or objects in motion.

• Collaborative and assistive technologies for manufacturing.

©Tekniker 2020

• Automatic sorting and storage of serial production runs.

INSPECTION AND MEASURING

MONITORING AND CONTACTLESS REGISTER

Know how

Technology

• Locating and tracking people and objects.

• Contactless acquisition systems (matrix, linear, steroscopic cameras …).

• Measuring and locating in large spaces.

• Contactless inspection techniques.

• Vision software (OpenCV, Halcon, MIL).

• Robotics.

• Augmented reality.

• Development of customized software.

• CNCs, machine tools and CMM platforms.

• Integrating sensors and measuring devices.

©Tekniker 2020

CASE STUDY Dual arm robotics for aeronautic component assembly

SCOPE OF APPLICATION Experiments Human Robot Collaboration

Service robotics

INSPECTION AND MEASURING

CALIBRATION AND MANAGEMENT OF CALIBRATION PROCEDURES INVOLVING COMPONENTS, MEASURING SYSTEMS AND STANDARD PATTERNS

CALIBRATION AND CERTIFICATION OF PRODUCTION AND MEASURING SYSTEMS

S2

S1

©Tekniker 2020

S5

LARGE SCALE METROLOGY

S3 MONITORING AND CONTACTLESS REGISTER

IN-PROCESS INSPECTION AND METROLOGY

DEVELOPMENT OF MEASURING EQUIPMENT

3D VERIFICATION AND CALIBRATION OF PARTS AND COMPONENTS

S6

S4 CONSULTANCY, TRAINING AND DISSEMINATION

S7

S8

INSPECTION AND MEASURING

COUNSELLING, TRAINING AND DISSEMINATION

• Counselling in the field of dimensional metrology.

• Specific training.

©Tekniker 2020

• Dissemination of contents.

INSPECTION AND MEASURING

COUNSELLING, TRAINING AND DISSEMINATION

©Tekniker 2020

Promotion of latest technology developments, products and services (national and international conferences, exhibitions, workshops…)

©Tekniker 2020

INSPECTION AND MEASURING

IN COLLABORATION WITH

TECHNOLOGICAL SOLUTIONS

© Tekniker 2020 ©Tekniker 2020

Parke Teknologikoa C/ Iñaki Goenaga, 5 20600 EIBAR GIPUZKOA SPAIN www.tekniker.es