Middle East & African wireless products catalogue by TAKEX Europe Ltd

W i r e l e s s e c u

WIRELESS SECURITY SYSTEM

r i t y s y s t e m

CONTENTS Wireless Security System

Receiver Series RECEIVER UNIT RECEIVER

2 3∼6

AUDIO MESSAGE/FLASH RECEIVER

MULTI-CHANNEL RECEIVER UNIT

MOBILE RECEIVER

RECEIVER UNIT

Repeater REPEATER

TRANSMITTER SERIES CARD TYPE/PUSH BUTTON TRANSMITTER

PUSH BUTTON WATERPROOF TRANSMITTER

CONTACT INPUT TYPE TRANSMITTER

SHOCK SENSOR TRANSMITTER

TILT DETECTION TRANSMITTER

MAGNET SWITCH TRANSMITTER

STICK SENSOR TRANSMITTER

WATERPROOF STICK SENSOR TRANSMITTER

15∼16

GLASS BREAKAGE SENSOR TRANSMITTER

16∼17

PENDANT/WATCH TYPE TRANSMITTER

PENDANT TYPE WATERPROOF TRANSMITTER

PENDANT TYPE TRANSMITTER

ALARM PUSH BUTTON TRANSMITTER

WATCH TYPE TRANSMITTER

MAGNET SWITCH TRANSMITTER (ONE PIECE TYPE)

MAGNET SWITCH TRANSMITTER (SEPARATE TYPE)

PASSIVE SENSOR TRANSMITTER

22∼23

TWIN MIRROR TYPE PASSIVE SENSOR TRANSMITTER

PASSIVE SENSOR TRANSMITTER

MAT SWITCH TRANSMITTER

FALLING DETECTION TRANSMITTER

EXPLOSION PROTECTION/DRIP-PROOF FALLING DETECTION TRANSMITTER (FALLING CALL)

FLAME SENSOR TRANSMITTER

PHOTOELECTRIC SENSOR TRANSMITTER

SOLAR POWER SUPPLY PHOTOELECTRIC SENSOR TRANSMITTER

MODEL NUMBER INDEX

WIRELESS SECURITY SYSTEM

Receiver Series Radio wave coverage of 100m from a transmitter! Guarantees an enhanced security system. ■RECEIVER UNIT

RX-710

RX-740

RX-710/740 ●Two types of alarm outputs are available; 1cH (RX710) and 4cH (RX-740). ●Up to 30 transmitters can be assigned into four groups and registered. (RX-740 only) ●When receiving the alarm and error signals from a transmitter, the receiver unit displays the channel and registration no. of the transmitter on the LCD. ●When receiving the battery exhaustion signal from a transmitter, an internal buzzer rings. ●The antenna can be removed. An extension antenna can be installed instead. ●Supports both 100V AC and 12V DC power supplies.

■SPECIFICATIONS Model No.

Power/current consumption Coverage distance Separate alarm output

120

N.O. / N.C. selectable (collectively) Tamper, battery exhaustion, regular transmission, environment, 4 circuits in total

83.5

132

Indoor (wall mount type)

Weight

Approx. 600g

Appearance

ABS resin (white)

(mounting pitch)

（23） Grommet 9.5×10

3-φ4 screw supported

Grommet 25×10

(knockout: right and left available) 25

Reference diagram for mounting

■RECEIVER UNIT

4 circuits

15 25

3-φ4 screw supported

Grommet 25×10

(knockout: right and left available) Grommet 25×10 (knockout)

(mounting pitch)

14.3

132

170

14.3

83.5

(mounting pitch)

14.3

170

25 Grommet 9.5×10

Contact type: Dry semiconductor contact N.O. / N.C. selectable (individually) Contact rating: 30V AC/DC 0.25A 1 circuit

Mounting position

50.7

2.2W or 170mA max.

Contact type: Dry semiconductor contact 30V AC/DC 0.25A

180

50.7 （23）

120

2W or 150mA max.

Approx. 100m (line-of-sight distance)

<RX-740>

180

<RX-710>

RX-740

100V AC 50/60Hz or 10 to 30V DC

Error output

■EXTERNAL DIMENSIONS (UNIT: mm)

Grommet 25×10 (knockout)

Reference diagram for mounting

RX-450-S ●Up to 30 transmitters can be assigned into four groups and registered. ●Outputs the contact of the registered group, channel by channel, when receiving the radio wave from each transmitter. ●Provides the digital display of the registration no. on the 7-segment LED when receiving the radio wave from each transmitter. ●When receiving the battery exhaustion signal from a transmitter, an internal buzzer rings. ●Designed to integrate the new type controller (C-602/603/606), and looks excellent if installed side by side.

■SPECIFICATIONS Model No.

RX-450-S

Voltage

100V AC (50/60Hz) or 10 to 18V DC

Power/current consumption

5W or 280mA

Operating frequency band

426MHz band (wireless equipment of low power security system)

Coverage distance

Approx. 100m (line-of-sight distance)

Antenna

λ/4 whip antenna

Contact output

Alarm output Contact type: Dry contact N.O. / N.C. individually selectable Contact rating: 30V AC/DC, 0.25A x 4 (CH1 to CH4) Error output Contact type: Dry contact N.O. / N.C. collectively selectable Contact rating: 30V AC/DC, 0.25A x 3 (Tamper, battery exhaustion, regular transmission)

Contact output (Dry semiconductor contact 30V AC/DC, 0.25A) N.O. / N.C. individually selectable

Battery exhaustion alarm output Tamper output Regular transmission error output

N.O. / N.C. collectively selectable

165

Individual output x 4

■EXTERNAL DIMENSIONS (UNIT: mm)

Alarm sound

170 150 (mounting pitch)

240

99 215 (mounting pitch)

4-φ4 screw supported

Grommet 20×70

Grommet 25×16 (knockout: top and bottom available)

RX-710

Voltage

Buzzer sound: Beep (Rings to notify battery exhaustion) Sound volume: Fixed Operation: Rings every 20 seconds until recovery

Allowable number of registered transmitters

30 units

Data storage function

Available

Wiring

Terminals

Mounting position

Indoor (wall mount type)

Ambient temperature range

-10ºC to +50ºC

Weight

Approx. 1,100g

Appearance

ABS resin (white)

■RECEIVER

RX-200A-S ●Up to 30 transmitters can be assigned into four groups and registered. Needless to say, all 30 units can be registered into one channel. ●To register a transmitter, simply set the receiver to Registration mode and operate the transmitter to send the radio wave signal. ●The alarm volume can be adjusted according to the location, using the volume dial on the side of the receiver, from 0 to 75dB. ●Receives the battery exhaustion signal from each transmitter, and notifies of the battery exhaustion state with blinking of the operation indicator and an intermittent chime corresponding with the reception channel. ●Both AC/DC power supply terminals can be used according to the location. Ready to use by simply inserting the 2m long AC cord equipped from the factory into an outlet. ●When receiving the radio wave signal from a transmitter, the operation indicator will blink, the dry contact will be output, and the chime corresponding with the reception channel will ring.

150

■EXTERNAL DIMENSIONS (UNIT: mm) 120

11.5

75 (left side 40)

200

VOL.

OFF

Knockout

AC cord length: 2m

Knockout

■RECEIVER

Contact output

Alarm sound

Indicator

Chime sound

Contact output

Channel 1: Ding-dong Channel 2: Beep beep-beep beep Channel 3: Ring-ring Channel 4: Pororon

Alarm output (General): Dry relay contact SPDT 30V AC/DC, 0.5A One-shot operation

RX-200A-S 100V AC (50/60Hz) or 10 to 16V DC 5W or 280mA max. 426MHz band (wireless equipment of low power security system) Approx. 100m (line-of-sight distance) λ/4 whip antenna Contact type: General dry relay contact (N.O.N.C.) Contact rating: 30V AC/DC, 0.5A (resistive load) Contact operation: One-shot operation for reception of CH1 to CH4 (approx. 4 seconds) CH1: Ding-dong CH2: Beep beep-beep beep CH3: Ring-ring CH4: Pororon Sound duration: Approx. 6 sec Sound volume: 0 to 75dB/1m ahead Changeable using the sound volume Battery exhaustion alarm: Chime rings intermittently. 2-color LED (red and green) Power ON: Green light ON Battery exhaustion alarm: Green light blinks Reception of CH1 to CH4: Red light ON (synchronized to alarm output) Lack of reception sensitivity: Red light blinks (synchronized to alarm output) Registration mode: Red and green lights ON alternately. Power switch Registration channel selector (internal) Cancellation switch (internal)

Allowable number of registered transmitters

30 units

Terminals (AC power supply input: Plug and terminal types combined) Mounting position Indoor (wall mount type) Ambient temperature range -10ºC to +50ºC Weight Approx. 650g Appearance ABS resin (white) Wiring

RX-200B-S

150

■EXTERNAL DIMENSIONS (UNIT: mm) 120

VOL.

OFF

RX-200B

Knockout

AC cord length 2m

Knockout

75 (left side 40)

200

11.5

Model No. Voltage Power/current consumption Operating frequency band Coverage distance Antenna

Operation switch

RX-200A

■SPECIFICATIONS

●Up to 30 transmitters can be assigned into four groups and registered.Needless to say, all 30 units can be registered into one channel. ●To register a transmitter, simply set the receiver to Registration mode and operate the transmitter to send the radio wave signal. ●The alarm volume can be adjusted according to the location, using the volume dial on the side of the receiver, from 0 to 75dB. ●Receives the battery exhaustion signal from each transmitter, and notifies of the battery exhaustion state with blinking of the operation indicator and an intermittent chime corresponding with the reception channel. ●Both AC/DC power supply terminals can be used according to the location. Ready to use by simply inserting the 2m long AC cord equipped from the factory into an outlet. ●When receiving the radio wave signal from a transmitter, the operation indicator will blink, the dry contact will be output, and the chime corresponding with the reception channel will ring. ●Equipped with a battery exhaustion alarm and regular transmission error outputs. ●Incorporates a power supply switch lock function. ●When combined with a contact input type transmitter, the operation mode can be selected (one-shot or retention operation). Chime sound

Channel 1: Ding-dong Channel 2: Beep beep-beep beep Channel 3: Ring-ring Channel 4: Pororon

Contact output Alarm output (General): Dry relay contact SPDT 30V AC/DC, 0.5A One-shot operation Battery exhaustion alarm output Regular transmission error output Dry semiconductor contact N.O. / N.C. collectively selectable 30V AC/DC, 0.25A

■SPECIFICATIONS Model No. RX-200B-S Voltage 100V AC (50/60Hz) or 10 to 16V DC Power/current consumption 5W or 220mA Operating frequency 426MHz band (wireless equipment of low power security system) band Coverage distance Approx. 100m (line-of-sight distance) Antenna λ/4 whip antenna Contact type: General dry relay contact (SPDT) Contact rating: 30V AC/DC, 0.5A (resistive load) Contact operation: One-shot operation for reception of Contact output CH1 to CH4 (approx. 4 seconds) Battery exhaustion alarm output Dry semiconductor contact (N.O. / N.C. collectively selectable) Regular transmission error output Dry semiconductor contact (N.O. / N.C. collectively selectable) CH1: Ding-dong CH2: Beep beep-beep beep CH3: Ring-ring CH4: Pororon Sound duration: Approx. 6 sec Alarm sound Sound volume: 0 to 75dB/1m ahead Changeable using the sound volume Battery exhaustion alarm: Chime rings intermittently. Allowable number of 30 units registered transmitters Data storage function Available Terminals Wiring (AC power supply input: Plug and terminal types combined) Mounting position Indoor (wall mount type) Ambient temperature range -10ºC to +50ºC Weight Approx. 650g Appearance ABS resin (white)

WIRELESS SECURITY SYSTEM ■RECEIVER

RX-300A-S ●Up to 30 transmitters can be assigned into four groups and registered. Needless to say, all 30 units can be registered into one channel. ●To register a transmitter, simply set the receiver to Registration mode and operate the transmitter to send the radio wave signal. ●The alarm volume can be adjusted according to the location, using the volume dial on the side of the receiver, from 0 to 75dB.(The volume will be automatically set to the maximum 75dB in the outing alert setting.) ●Receives the battery exhaustion signal from each transmitter, and notifies the state with blinking of the channel indicator and intermittent chime corresponding with the reception channel. (Only during the presence alert) ●Both AC/DC power supply terminals can be used according to the location. Ready to use by simply inserting the 2m long AC cord equipped from the factory into an outlet. ●Since the alert mode is switchable between the presence and outing modes, you can set the visitor chime when you are present and the security system when you are out. ●Automatically conducts a loop check (lock up check) when the outing alert is set, and notifies of an error (if any) by generating the check sound (beep-beep-beep) and alternately lighting the alert mode indicator. Shifts to the alert mode if no error occurs. ●An alert /Alarm delay function (0 sec., 30 sec., 1 min., 2 min.) is built in. ●The alarm output timer is switchable between four steps. (3 sec, 30 sec., 2 min., 5 min.) ●When receiving a signal from a transmitter during the outing alert mode, the indicator of the reception channel will blink and the memory display will appear. ●Power can be supplied to an external device during operation at 100V AC. (12V DC, 150mA max.) ●When receiving the radio wave signal from a transmitter, the unit notifies the state with a chime corresponding to the reception channel and one contact output during the presence alert. During the outing alert, with the alarm sound and three types of contact output.

■SPECIFICATIONS

150

■EXTERNAL DIMENSIONS (UNIT: mm)

120

11.5

Model No.

RX-300A-S

Voltage

100V AC (50/60Hz) or 10 to 16V DC

Power/current consumption

12W or 350mA max.

Operating frequency band

426MHz band (wireless equipment of low power security system)

Coverage distance

Approx. 100m (line-of-sight distance)

外出

VOL.

在室

OFF

75 (left side 40)

200

Antenna

Contact output

RX-300A

Knockout

AC cord length 2m

General output

Output (1) (Operates only during the outing alert)

Contact type:Dry relay contact (N.O.) Contact rating: 100V (AC) 500W max.(incandescent lamp load) Contact operation: Timer operation for reception of CH1 to CH4

Output (2) (Operates only during the outing alert)

Contact type: Dry relay contact (N.O.) Contact rating: 30V AC/DC, 0.5A (resistive load) Contact operation: Timer operation for reception of CH1 to CH4

Power output

Knockout

Alarm sound

Indicator

Operation switch Allowable number of registered transmitters Timer function

λ/4 whip antenna Contact type: Dry relay contact (N.O.N.C.) Contact rating: 30V AC/DC, 0.5A (resistive load) Contact operation: One-shot operation for reception of CH1 to CH4 (approx. 4 seconds)

150mA max. 12V DC During the presence alert CH1: Ding-dong CH2: Beep beep-beep beep CH3: Ring-ring CH4: Pororon Sound duration: Approx. 6 sec Sound volume: 0 to 75dB/1m ahead・Changeable using the sound volume During the outing alert CH1 to CH4: Peepo-peepo Sound duration: Alarm output timer time Sound volume: 75dB/1m ahead, fixed Loop check error sound: Beep-beep-beep Battery exhaustion alarm: Chime rings intermittently. (Only during the presence alert) Power indicator (green)

Power ON: ON Battery exhaustion alarm: Blinks

Channel indicator (red)

Alarm signal reception: Signal received channel ON (until recovery) Tamper signal reception: Signal received channel blinks (until recovery) Registration mode: Registered channel blinks

Alert mode indicator (green)

Outing alert mode: Outing alert indicator ON Presence alert mode: Outing alert indicator ON Loop check error: Outing and presence alert indicators ON alternately

Power switch Alert mode selector Registration channel selector (internal) Cancellation switch (internal) 30 units Alarm output timer: 3 sec, 30 sec, 2 min, 5 min Alarm alert delay timer: 0, 30 sec., 1 min., 2 min. (effective only during the outing alert)

Wiring

Terminals (AC power supply input: Plug and terminal types combined)

Mounting position

Indoor (wall mount type)

Ambient temperature range

-10ºC to +40ºC

Weight

Approx. 700g

Appearance

ABS resin (white)

■RECEIVER

RX-360 ●A complete protection system can be established by combining with a low power type security transmitter, disaster prevention transmitter or emergency button transmitter. Switchable between the outing alert, presence alert, and cancel modes for security. ●Since the panel lock function operates once the alarm is output during the outing alert mode, there is no risk that an intruder will easily cancel the alert to stop the alarm. ●The delay timer will work only when your family members come home, assuming they come home while the presence alert is active. ●Since the unit is equipped with three types of output (general, intrusion and fire/emergency), intimidation or automatic notifying devices can be connected according to your purpose. ●Operates the chime sound, alarm, and alarm output using the four channels according to your purpose. Intrusion 1 (Chime/1CH) Suitable for the entrance or back door alert. When opening/closing is detected during the alert cancel, the chime will ring to notify the arrival of a guest. Intrusion 2 (Perimeter/2CH) Suitable for the perimeter alert. Regardless of the delay timer, immediate alert/alarm operation starts, which helps you intimidate an intruder at once, for more effective security. Intrusion 3 (Indoor/3CH) Suitable for the indoor alert. Operation stops during the presence mode. Emergency/gas/fire (4CH) Suitable for the emergency or fire alarm. This channel operates for 24 hours regardless of whether an alert is set. ■SPECIFICATIONS Model No. Power supply Operating frequency band Antenna Coverage distance

■EXTERNAL DIMENSIONS (UNIT: mm)

150

Alarm output

120

11.5

外出

VOL.

在室

OFF

75 (left side 40)

200

Power output

Indicator

RX-300A

Knockout

Operation switch

AC cord length 2m

Knockout

RX-360 100V AC 50/60Hz 12W or 10 to 16V DC 350mA 426MHz band (wireless equipment of low power security system) λ/4 whip antenna Approx. 100m (line-of-sight distance) Contact type: Large dry relay contact (N.O.) General output Contact rating: 100V AC, 500W (incandescent lamp load) Contact type: Small dry relay contact (N.O.) Contact rating: 30V AC/DC, 0.5A (resistive load) Contact operation: Emergency/ Operates during the time set using the alarm output timer fire output (3 sec, 30 sec, 2 min, 5 min) *Extended when input continuously Contact type: Dry relay contact (N.O.N.C.) Contact rating: 30V AC/DC, 0.5A (resistive load) Intrusion output Contact operation: Operates during the time set using the alarm output timer (3 sec, 30 sec, 2 min, 5 min) 12V DC, 150mA max. Power indicator Power ON: ON (green) Battery exhaustion alarm: Blinks (only during the alert) Alarm signal reception: Signal received CH indicator ON Tamper signal reception: Signal received CH indicator ON *Retained until recovery CH indicator Lack of reception sensitivity: (red) Signal received CH indicator ON (approx. 4 sec) Registration mode: Registered channel indicator blinks Outing alert mode: Outing alert indicator ON Alert mode Presence alert mode: Outing alert indicator ON indicator Loop check error: (green) Outing and presence alert indicators ON alternately Alert switch Alert mode selector Registration channel selector (internal) Cancellation switch (internal) 1CH: Chime sound Ding-dong When canceled 4CH: Alarm sound Peepo 1CH: Alarm sound Peepo Alarm during 2CH: Alarm sound Peepo the presence 3CH: No sound due to operation stop alert 4CH: Alarm sound Peepo Alarm during the outing alert CH1 to CH4: Alarm sound Peepo

Internal electronic siren

Alert/alarm delay function Allowable number of registered transmitters Wiring Operating Temperature Mounting position Weight Appearance

Chime sound: Approx. 6 sec *Extended when input continuously (Note that the chime sound from the same transmitter pauses for 12 seconds.) Sound duration Alarm sound: Alarm output timer setting time (3 sec, 30 sec, 2 min, 5 min) Chime sound: 0 to 75dB/1m ahead Sound volume Changeable using the sound volume Alarm sound: 75dB/1m ahead, fixed Loop check error sound: Beep-beep-beep During the outing/presence alert: Available (delay time: 0 (no delay), 30 sec, 1 min, 2 min) *Only alert delay function available during the presence alert 30 units Terminals (AC power supply input: Plug and terminal types combined) -10ºC to +40ºC Indoor (wall mount type) Approx. 700g ABS resin (white)

■Alarm sound and alarm output operation

1CH Intrusion 1

Alarm

2CH Intrusion 2

Alarm

3CH Intrusion 3

Alarm

4CH Emergency/fire

Alarm

Outing alert mode Alarm sound Alarm output sound Peepo rings Intrusion and general outputs With alert/alarm delay function sound Peepo rings Intrusion and general outputs Without alert/alarm delay function sound Peepo rings Intrusion and general outputs With alert/alarm delay function Emergency/fire and sound Peepo rings general outputs Without alert/alarm delay function

Presence alert mode Alarm sound Alarm output Alarm sound Peepo rings Intrusion ouput With alert/alarm delay function, Without alert/alarm delay function Alarm sound Peepo rings Intrusion ouput Without alert/alarm delay function Operation stops

Operation stops

Emergency/fire and Alarm sound Peepo rings general outputs Without alert/alarm delay function

Cancellation mode Alarm sound Alarm output Chime sound Ding-dong rings

Operation stops

Emergency/fire and Alarm sound Peepo rings general outputs Without alert/alarm delay function

*When receiving the tamper signal, alarm output operates as long as the alert switch is set to Alert , regardless of in the outing or presence alert mode.

WIRELESS SECURITY SYSTEM ■RECEIVER

RX-350 ●Assigns four channels into the operation application and generates a chime sound, alarm or alarm output according to the alert status. Each channel application is as follows: CH1: Intrusion 1/chime, CH2: Intrusion 2 (Perimeter), CH3: Intrusion 3 (Indoor), CH4: Emergency/gas/fire. There are additional two alert modes, presence and outing. Performs a different alert operation for each channel. ●Assign transmitters into the channels according to their application and register them. Up to 30 units can be registered, which allows you to register all 30 units into 1 channel or 15 units into 2 channels (total 30 units) respectively. ●To register a transmitter, simply set the receiver to Registration mode and operate the transmitter to send the radio wave signal. ●Receives the battery exhaustion signal from each transmitter, and notifies of the battery exhaustion state with blinking of the channel indicator and an intermittent chime. (Only during the presence alert) ●Both AC/DC power supply terminals can be used according to the location. ●Automatically conducts a loop check (lock up check) when the outing alert is set, and notifies of an error (if any) by generating the check sound (beep-beep-beep) and alternately lighting the alert mode indicator. Shifts to the alert mode if no error occurs. ●An alert /Alarm delay function (0 sec., 30 sec., 1 min., 2 min.) is built in. ●The alarm output timer is switchable between four steps. (3 sec., 30 sec., 2 min., 5 min.) ■SPECIFICATIONS Model No.

RX-350

Voltage

100V AC (50/60Hz) or 10 to 16V DC

Power/current consumption

12W or 350mA max.

Operating frequency band

426MHz band (wireless equipment of low power security system)

Coverage distance

Approx. 100m (line-of-sight distance)

Antenna

λ/4 whip antenna General dry relay contact (SPDT) Contact rating: 30V AC/DC, 0.5A (resistive load) Contact operation: One-shot operation for reception of CH1 to CH4 (approx. 4 seconds)

■EXTERNAL DIMENSIONS (UNIT: mm)

Contact output

Output (2) Dry relay contact (N.O.) (Operates in conjunction with the alarm sound) Contact rating: 30V AC/DC, 0.5A (resistive load) Contact operation: Timer operation for reception of CH1 to CH4

150 120

Power output

200

VOL ON

在室

OFF

75 (left side 40)

11.5

外出

Output (1) Dry relay contact (N.O.) (Operates in conjunction with the alarm sound) Contact rating: 100V (AC), 500W max. (incandescent lamp load) Contact operation: Timer operation for reception of CH1 to CH4

150mA max. 12V DC When canceled

CH1 to CH3: Operation stopped CH4: Peepo

During the presence alert

CH1: CH2: CH3: CH4:

During the outing alert

CH1 to CH4: Peepo

Sound duration

Chime sound: Approx. 6 sec Alarm sound: Alarm output timer time

Sound volume

Chime sound: 0 to 75dB/1m ahead, Changeable using the sound volume Alarm sound: 75dB/1m ahead, fixed

Alarm sound

RX-350

Knockout

Ding-dong Peepo Operation stopped Peepo

Loop check error sound: Beep-beep-beep

AC cord length 2m

Battery exhaustion alarm: Chime rings intermittently. (Only during the presence alert)

CH1 CH2 CH3 CH4

Channel indicator (red)

Alarm signal reception: Signal received channel ON (until recovery) Tamper signal reception: Signal received channel blinks (until recovery) Registration mode: Registered channel blinks

Alert mode indicator (green)

Outing alert mode: Outing alert indicator ON Presence alert mode: Outing alert indicator ON Loop check error: Outing and presence alert indicators ON alternately

Operation switch

Power switch, Alert mode selector, Registration channel selector (internal), Cancellation switch (internal)

Allowable number of registered transmitters

30 units

Timer function

Power ON: ON Battery exhaustion alarm: Blinks (only during the alert)

Knockout

Indicator

Mode

Power indicator (green)

Alarm output timer: 3 sec, 30 sec, 2 min, 5 min Alarm alert delay timer: 0 sec, 30 sec, 1 min, 2 min (Only CH1 and CH3 are effective during the outing alert)

Wiring

Terminals (AC power supply input: Plug and terminal types combined)

Mounting position

Indoor (wall mount type)

Ambient temperature range

-10ºC to +40ºC

Weight

Approx. 700g

Appearance

ABS resin (white)

Presence alert mode Outing alert mode (Alert when no one is at home, such as when you are out) (Alert when you are at home, such as when you are asleep) Alarm sound

Alarm output

Alarm sound

Alarm output

Alarm sound Peepo Sound volume: Fixed (Alarm rings after the time set for alert/alarm delay elapsed.)

Outputs 1 and 2 and general output operate after the time set for alert/alarm delay elapsed.

Chime sound Ding-dong

General output only

Alarm sound Peepo

Outputs 1 and 2 and general output

Operation stopped

Alarm sound Peepo Sound volume: Fixed

Outputs 1 and 2 and general output immediately operate

Alarm sound Peepo

Outputs 1 and 2 and general output

Cancellation mode (When the outing or presence alert is not set) Alarm sound

Alarm output

Operation stopped

Alarm sound Peepo

Outputs 1 and 2 and general output

■AUDIO MESSAGE/FLASH RECEIVER

RX-30

RX-30A

●Wireless receiver with a flash light and audio message. (Standard messages: Error has occurred. , Someone has intruded. ) ●Can be installed both indoors and outdoors. Up to 50 transmitters can be registered. ●Equipped with a flash light (LED x 12) and alarm sound. ●Two models with different power supplies are available, a 12V DC type and 100V AC type. ●Memory operation by flash light blinking when the alarm occurs. ●The flash light operation can be set to be enabled or disabled when the alarm occurs. ●The 100V AC type can provide blackout compensation for 30 minutes using an optional dedicated emergency battery (BA-20A). ●The alarm operation can be set or canceled using the optional remote control unit (for bidirectional wireless) RS001. ■SPECIFICATIONS Model No.

RX-30

RX-30A

Power input

10 to 30V DC (without polarity)

100V AC 50/60Hz

300mA max.

Current / power consumption Operating frequency band Antenna

Helical antenna (incorporated)

Coverage distance

Approx. 100m (line-of-sight distance)

Flash output

Flash color: Red (high-brightness LED x 12) Blinking frequency: Repeats the cycle of lighting 4 times for approx. 0.4 sec. and one pause for 0.4 sec. when the alarm is activated. When shifting to protection: Lights ON once for approx. 0.2 sec. When shifting to cancellation: Lights ON twice for approx. 0.6 sec. (Lights for 0.2 sec., pauses for 0.2 sec. and lights for 0.2 sec.) During memory display operation: Lights once in cycles of approx. 3 sec.

Sound output

Sound volume: Changeable from 0 to 70dB and more/ 1m using the sound volume when the alarm is activated A certain volume is kept when the alarm is set or cancel, regardless of the sound volume Sound cycle: Alarm: Repeatedly outputs the message during the timer set time. When shifting to protection: Rings once for approx. 0.2 sec. (synchronized with the flash output) When shifting to cancellation: Rings twice for approx. 0.6 sec. (synchronized with the flash output)

Messages

RX-30 (A08), RX-30A (A08): Error has occurred RX-30 (A10), RX-30A (A10): Someone has intruded

■EXTERNAL DIMENSIONS (UNIT: mm) Wiring insert 11.5×8 (knockout)

Alarm output 2-φ4 screw supported 80

Power indicator (green LED)

107

Operation indicator

Reception indicator (red LED)

209.5

234 Cover lock screw

Wiring insert 11.5×8 (knockout)

Contact type: Dry semiconductor contact (N.O.) Contact operation: Operates for the set time when Timer operation of alarm operation mode is set. (10, 30, 120, 300 sec) Without retrigger Operates in conjunction with the controller or contact point type transmitter when real time operation of alarm operation mode is set. (Maximum operation time is 10 minutes) Contact rating: 24V AC/DC, 0.25A max. (Resistive load) Contact protection resistance 3Ω built in Power ON: ON Transmitter battery exhaustion alarm: Blinks (ON for 0.1 sec. and OFF for 0.6 sec.) Blackout backup: Blinks (ON for 0.6 sec. and OFF for 0.6 sec.) Only when the dedicated emergency power supply is used Reception: At the normal reception level: Lights for the reception time + 0.5 sec. At the low reception level: Lights for the reception time + 4 sec.

Allowable number of registered transmitters

50 units

Tamper operation

Transmitter tamper: Alarm operation for the timer set time when the tamper signal is received. (Operates in conjunction with the controller operation when the units is used to operate with the controller) Body tamper: Alarm operation for the timer set time when the cover of the body is opened.

Alarm memory operation

Notification after alarm activation: Flashlight ON with a period of once in approx. 3 sec. (Continues until the time of shift to the protection state again, after reset.) Notification after reset: Flashlight ON for 2 sec. and the alarm rings. (Activates only with the unidirectional type remote controller used, when the unit is used to operate with the controller)

Reference diagram for mounting

Ambient temperature range

-10ºC to +50ºC

Wiring

Terminals

Mounting position

Outdoor, indoor

Weight

Approx. 500g

Appearance

■OPTIONAL ACCESSORIES

●Pole attachment <BP-22>

426MHz band (wireless equipment of low power security system)

●Wall mounting bracket <BW-24>

Housing: AES resin

●Repeater (For bidirectional wireless/registration type)

<RTX-300>

Approx. 600g Lens: PC resin

●Dedicated emergency power supply <BA-20A>

WIRELESS SECURITY SYSTEM ■MULTI-CHANNEL RECEIVER UNIT RX-1000

RX-2000

RX-3000

●Receiver unit for large facilities, including buildings, public institutions, and schools. Receives the radio wave from each transmitter in the wireless security system, and notifies of an emergency, break-in, or fire via various notification devices or a multi-channel controller. ●Offers three types with a different independent output to deal with security, disaster prevention, and protection systems in large buildings. The following models can be selected according to the security scale. ≪RX-1000≫ 10 channel indicators and independent output ≪RX-2000≫ 20 channel indicators and independent output ≪RX-3000≫ 30 channel indicators and independent output ●Up to 60 transmitters can be assigned into channels and registered. Allows you to register all 60 units into 1 channel or 30 units into 2 channels respectively. ●Equipped with four error output circuits including a tamper output to notify of vandalism, environmental trouble output to notify of disturbing waves or peripheral noise, battery exhaustion and regular transmission error outputs, in addition to one circuit for general alarm output. ●Clearly displays the channel and address (registration no.) of the transmitter which sends the radio wave on the LCD to enable easy identification of the transmitter. Also, controls the alarm memory in conjunction with the alarm set or cancel. ●Displays the radio wave reception status from the transmitter using the audio and 4-step LCD displays. Contact output

■EXTERNAL DIMENSIONS (UNIT: mm)

<RX-1000>

RX-1000

RX-2000

RX-3000

Alarm output General output x 1 Dry N.O.N.C. Individual output x 10 Dry semiconductor N.O. / N.C. selectable contact (individually) Error output Tamper output x 1 Battery exhaustion alarm output x 1 Regular transmission error output x 1 Environmental trouble output x 1 Dry semiconductor contact (N.O. / N.C. collectively selectable)

Alarm output General output x 1 Dry N.O.N.C. Individual output x 20 Dry semiconductor N.O. / N.C. selectable contact (individually) Error output Tamper output x 1 Battery exhaustion alarm output x 1 Regular transmission error output x 1 Environmental trouble output x 1 Dry semiconductor contact (N.O. / N.C. collectively selectable)

Alarm output General output x 1 Dry N.O.N.C. Individual output x 30 Dry semiconductor N.O. / N.C. selectable contact (individually) Error output Tamper output x 1 Battery exhaustion alarm output x 1 Regular transmission error output x 1 Environmental trouble output x 1 Dry semiconductor contact (N.O. / N.C. collectively selectable)

■SPECIFICATIONS Model No.

RX-1000

RX-2000

Power / current consumption

6W or 350mA

8W or 450mA

10W or 550mA

Operating frequency band

426MHz band (wireless equipment of low power security system)

Coverage distance

Approx. 100m (line-of-sight distance) λ/4 whip antenna

Alarm general output

Dry N.O.N.C. 30V AC/DC 0.5A

150 (mounting pitch)

Antenna

Separate alarm output

Alert/Cancellation output

Dry N.O.N.C. 30V AC/DC 0.5A

Alert/Cancellation input

1 circuit N.O. / N.C. selectable contact

Power/reception indicator

2-color LED Power ON: Green light ON (Red light ON only for reception)

Contact type: Dry semiconductor N.O. / N.C. selectable (individually) 10 circuits

<RX-2000/3000>

340 300 (mounting pitch)

167

Alarm sound

When pressing the LCD operation buttons: Beep Inspection mode: Pu Transmitter battery exhaustion: Beep (every 20 sec.) Registration error: Bu Volume fixed for all events

Allowable number of registered transmitters

60 units

Included functions

Memory function, Tamper function

Wiring

Terminals

Mounting position

Indoor (wall mount type)

Weight

-10ºC to +50ºC Approx. 1,300g

Appearance

54 (knockout: top and bottom available)

Approx. 2,000g ABS resin (white)

■OPTIONAL ACCESSORIES

Grommet 30X16

Displayed when the alarm or error occurs (including the memory function) Displayed during operation, such as registration, cancellation, inspection, or check.

LED display

Ambient temperature range

30 circuits

Red LED Alarm reception: ON Error/Memory: Blinks

CH indicator

240 215 (mounting pitch)

20 circuits

Contact type: Dry semiconductor contact (N.O. / N.C. collectively selectable) 30V AC/DC 0.25A Tamper, battery exhaustion, regular transmission, environment, 4 circuits in total

Error output

Grommet 25X16 (knockout: top and bottom available)

RX-3000

100V AC 50/60Hz or 10 to 18V DC

170

240 215 (mounting pitch)

167

Voltage

●Alarm sound unit <RXB-01> *12V DC power supply is required.

Approx. 2,000g

■MOBILE RECEIVER

RX-50K ●By combining this unit with each transmitter in the low power security system, you can get the status of each transmitter at hand within the reception area while you are carrying it. This enables alarms to be notified of in real time. This also enables the notification of emergencies via an electric communications line by connecting its external output to a communication device such as a mobile phone. ●Up to 50 units can be registered, which allows you to register all units into 1 channel or assign them into 4 channels for registration. Applicable to large facilities including schools, factories, and care facilities, this unit easily helps to identify from which area the radio wave is received, by assigning one of four channels to each transmitter. ●Light-weight, with a total weight of about 84g including battery. Can be comfortably carried around as though it was a mobile phone. Smart design, with a luxurious pearl silver color, and focusing on operability. ●When receiving the alarm signal from a transmitter, this unit notifies with a beep sound in three levels of volume or vibration, and displays the alarm type on the LCD. Since the alarm sound can be heard using the attached earphone, this unit can be used in various places and situations. The battery exhaustion, tamper, and/or regular transmission error of a transmitter can be also displayed on the LCD. In the check mode, the radio wave reception status can be confirmed with a 4-step antenna display. ■SPECIFICATIONS

* This is not a mobile phone. The LCD backlight has been lightened for the catalog. Please note that the unit does not always light during usage.

■EXTERNAL DIMENSIONS (UNIT: mm)

Model No.

RX-50K

Voltage

3.7V DC (rechargeable lithium-ion battery)

Continuous operation time

Approx. 50 hours (in the standby state) *More alarm operation shortens available operation time.

Charge time

Power supply OFF: Approx. 8 hours Power supply ON: Approx 10 hours

Operating frequency band

426MHz (wireless equipment of low power security system)

Antenna

Helical antenna

Coverage distance

Approx. 100m (line-of-sight distance)

LED display

Displayed when the alarm or error occurs (including the memory function) Displayed during operation, such as registration, cancellation, inspection, or check. (Backlight ON for 10 sec. after key operation)

Alarm/charge indicator

2-color LED Alarm/tamper reception: Red light blinks During charge: Red light ON Charge completion: Green light ON

Built-in buzzer

Alarm (tamper) activation: Pi-pi-pi-pi for 20 sec. (Off delay operation) The sound volume can be set in 4 steps, High , Middle , Low , and Silent . Each key operation: Beep Inspection mode: Pu Registration error: Bu Sound volume fixed

Vibrator function

Alarm (Tamper) activation: Operates when the sound volume is set to Silent .

Alarm contact output (General)

Alarm (Tamper) activation: Dry semiconductor output, N.O activates. (Open drain output 5V DC, 30mA or less, With polarity) Output duration: Approx. 20 sec (Off delay operation) Synchronizes with the contact status of the transmitter, when receiving the tamper signal or that from maintainance type transmitter (contact input transmitter)

Alarm output function

Alarm (Tamper) activation: Alarm sound pi-pi-pi-pi is output from the output terminal

Portable receiver RX-50K

Dedicated charger DC-50K

■OPTIONAL ACCESSORIES *Both are attached from shipment. ●Dedicated charger <DC-50K>

●Dedicated battery <BA-50K>

Allowable number of registered transmitters

50 units

Body tamper

Not available

Memory function

Available (Cleared when the power is turned OFF.)

Ambient temperature range

0ºC to +45ºC

Weight

Approx. 84g

Appearance

ABS resin (pearl silver coating)

Unit

Dedicated charger

Model No.

DC-50K

Voltage

100V AC 50/60Hz

Continuous operation time

No contact charge type

Ambient temperature for charging battery

+10ºC to +40ºC

Weight

Approx. 120g

Appearance

PPE resin (black)

WIRELESS SECURITY SYSTEM ■RECEIVER UNIT

RX-10

RX-10A ●Two models with different power supplies are available, a DC type and AC type. ●The alarm output time can be selected from eight types of timer settings. ●Lead wire supplied together to help wiring. ●The battery exhaustion status of a transmitter can be confirmed with the operation indicator. ●Can be installed outdoors with its rainproof structure. ●Can be combined with an intimidation device such as a siren or light and used outdoors. ●Can be mounted on a wall or pole. (An optional attachment band is required for pole mounting.) ●The antenna can be removed. You can store the main unit in a box and connect an extension antenna.

■EXTERNAL DIMENSIONS (UNIT: mm)

φ113

207

■SPECIFICATIONS Model No.

RX-10

RX-10A

Voltage

10 to 28V DC (with polarity)

100V AC 50/60Hz

Current/power consumption

100mA

Operating frequency band

426MHz band (wireless equipment of low power security system)

Coverage distance

Approx. 100m (line-of-sight distance)

Antenna

λ/4 whip antenna

Contact output

Alarm: Dry relay contact N.O. / N.C. selectable

Contact capacity

100V AC 500W max. (incandescent lamp load) 30V DC 5A max. inductive load

4-4 screw supported

（24）

Alarm output timer

89 103

Indicator

Cord length 5m

3/10/30/60 sec. /2/3/5 min. / Continuous (Off delay operation) Retained until the power is turned OFF, when [Continuous] is set. Power ON: Green light ON Battery exhaustion: Green light blinks Reception: Red light ON (synchronized with the alarm output) Lack of reception sensitivity: Red light blinks (for approx. 3 sec. after reception) Registration mode: Red and green lights ON alternately.

Allowable number of registered transmitters

30 units

Wiring

With the cab tire cable (5m)

Ambient temperature range Weight Appearance

-10ºC to +50ºC Approx. 950g (including cable)

Approx. 1,000g (including cable) AES resin

Repeater Supports various layouts by using the repeater mode and delay time settings, even in the place where a transmitter is 100m away from a receiver or under bad radio wave conditions. RTX-300 ■EXTERNAL DIMENSIONS (UNIT: mm)

145

50.7

Power/current consumption

2W or 150mA

Voltage

14.3

RTX-300 100V AC 50/60Hz or 10 to 16V DC (with polarity)

14.3

Model No.

83.5

■SPECIFICATIONS

132 (mounting pitch)

（23）

120

(mounting pitch)

●When radio waves cannot be transmitted directly (in a location more than 100m away or under bad radio wave conditions), this unit receives the radio wave from a transmitter and resends it to a receiver. ●Though this unit normally relays the registered transmitter or repeater, unregistered transmitters can be relayed depending on the settings. This is for transmitters only. ●Up to 60 units including a remote control unit can be registered. ●When receiving the alarm and error signals from a transmitter, the receiver unit displays the channel and registration no. of the transmitter on the LCD.

170

■REPEATER

3-φ4 screw supported

Grommet 25×10

Operating frequency 426MHz band 4 waves (10mW max.) (wireless equipment of low power security system) band (output) Coverage distance

Approx. 100m (line-of-sight distance)

Transmission radio wave arrival distance

Approx. 100m (line-of-sight distance)

Blackout compensation

For approx. 30 min. (when fully charged), Nicad battery

Ambient temperature range

-10ºC to +50ºC

Mounting position

Indoor (wall mounting)

Reference diagram for mounting 25 Grommet 25×10

Weight

Approx. 600g

Appearance

ABS resin (white)

Grommet 9.5×10

(knockout: right and left available) AC cord length 2m

(knockout)

WIRELESS SECURITY SYSTEM

TRANSMITTER SERIES A wide variety of transmitters for various security plans, like security, disaster prevention, and protection. For emergency notiﬁcation

You can select the most suitable transmitter according to the application and location.

For theft prevention

●Emergency calls in case of burglary, or acute disease

●Prevention of car break-ins or bicycle theft ●Theft prevention of valuables and cash

For ﬁre prevention

For protection from suspicious individuals

For intrusion prevention

●Accidental or suspicious ﬁre detection

●Glass breakage or room intrusion detection

■CARD TYPE/PUSH BUTTON TRANSMITTER

TX-101A

●Alerts around the perimeter of buildings

TX-101P

Card type transmitter TX-101A ●Compact, card type mobile transmitter with a thinness of 6mm ●Two transmission modes are available: one-shot transmission which transmits the radio wave once every push of the button, and continuous transmission which continues transmission until reset. ●The battery normally lasts around 2 years when transmitting once a day. ●Utilizes a coin type lithium battery for simple replacement. ●Monitors the radio wave arrival status using the regular transmission function. ●Transmits the battery exhaustion signal to the receiver and the body indicator blinks when the battery voltage drops below a certain level. ●Mounted on the wall easily using the optional wall mount holder.

■EXTERNAL DIMENSIONS (UNIT: mm)

Push button transmitter TX-101P ●Splash-proof construction usable in semi-indoor areas, this unit can be installed at an entrance and used as a chime to notify the arrival of guests. ●One-shot transmission which transmits the radio wave once every push of the button ●The transmission function is the same as that of TX-101A.

<TX-101P>

<TX-101A>

PUSH

14.5

押

120

■OPTIONAL ACCESSORIES ■SPECIFICATIONS Model No. Voltage Battery life

●Wall mount holder for TX-101 <BH-101>

●Pendant type holder <BPH-101>

Operating frequency band (output) Radio wave arrival distance Included functions Mounting position Ambient temperature range Weight Appearance

TX-101A

TX-101P 3V DC (coin-type lithium battery: CR-2032 included) Approx. 2 years (1 transmission per day) *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

426MHz band (3mW max.) Approx. 100m (line-of-sight distance) Battery exhaustion function/ Regular transmission function Transmission mode One-shot changeover function transmission Indoor/semi-outdoor Indoor (Drip-proof structure) -10ºC to +50ºC Approx. 35g Approx. 118g (including battery) (including battery) ABS resin (white)

■PUSH BUTTON WATERPROOF TRANSMITTER

TX-113

●Can be used as an emergency push button. ●A waterproof transmitter for daily life which can be used in a bathroom or outdoors. ●Can be mounted on the wall or simply placed on the table according to the situation and purpose of use. ●Switchable between the one-shot and continuous transmission modes ●2 AAA alkaline batteries for the power supply. ●The battery normally lasts around 2 years when transmitting 10 times a day.

■OPTIONAL ACCESSORIES

■EXTERNAL DIMENSIONS (UNIT: mm)

48 (mounting pitch)

Model No.

TX-113

Power supply

AAA alkaline battery x 2 (3V DC) Approx. 2 years (10 transmissions per day, at normal temperature)

Battery life

Operating frequency band

426MHz band (wireless equipment of low power security system)

Output

10mW max.

Radio wave arrival distance

100m max. (line-of-sight distance)

Antenna

Incorporated

Indicator (red LED)

Transmission: ON Battery exhaustion: Blinks Indoor, outdoor

Ambient temperature range

-10ºC to +50ºC

Waterproof

Waterproof for daily life

φ83

Mounting position

●Protector <BPR-113>

One-shot transmission/Continuous transmission changeover function Included functions Battery exhaustion function Regular transmission function

■CONTACT INPUT TYPE TRANSMITTER

TX-102A

■EXTERNAL DIMENSIONS (UNIT: mm) 64 32

Grommet (knockout)

100

■OPTIONAL ACCESSORIES

●AC adapter <DC-1115>

■CONTACT INPUT TYPE TRANSMITTER

TX-116

Weight

Approx. 140g (including battery)

Appearance

AES resin (white)

TX-102BK

●Transmitter used to incorporate the wired sensors including the shutter and glass breakage sensor, and/or alarm box into this system. ●Two type transmission modes are available: one-shot transmission which transmits radio wave for one second at the sensor signal input and recovery respectively, and repeat transmission which transmits every 20 seconds from the sensor signal input to recovery. ●The input signal can be switched between N.O. and N.C., which corresponds with various sensors (TX-102BK is for N.C. only.) ●The battery normally lasts around 2 years when transmitting 10 times a day. ●Utilizes alkaline batteries for simple replacement. ●Monitors the radio wave arrival status using the regular transmission function. ●Transmits the battery exhaustion signal to the receiver as well as the body indicator blinks when the battery voltage declines below a certain level.

■SPECIFICATIONS Model No.

Input signal

Voltage

120 (mounting pitch) （9） 83.5 (mounting pitch) 61

●Dedicated lithium battery <CR17450E-R-2-CM2>

140

■OPTIONAL ACCESSORIES

Grommet 7.5×9 (knockout: right and left available) Grommet 6.2×9.5 (knockout) 21.2

（11）

TX-102BK

Alarm input: 1 circuit Tamper input: 1 circuit

Alarm input (N.C. only)/Tamper input: 1 circuit for each (With the alert/cancellation switch)

9V DC (alkaline battery) or 10 to 15V DC Approx. 2 years (10 transmissions per day)

Battery life

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency band (output)

426MHz band (10mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Battery exhaustion function/Regular Included functions transmission function/Transmission mode changeover function/Tamper function Mounting position

Indoor

Ambient temperature range

-10ºC to +50ºC

Weight

Approx. 120g

Appearance

ABS resin (white)

■SPECIFICATIONS Model No.

TX-116

TX-116L

Power supply

AA alkaline battery x 2 (3V DC) or 5 to 15V DC 35mA

Dedicated lithium battery CR17450ER-2-CM2 (3V DC) or 5 to 15V DC 35mA

■EXTERNAL DIMENSIONS (UNIT: mm) Grommet 10×7.5 (knockout)

TX-102A

TX-116L

●Low cost contact input type transmitter ●Two types are available: alkaline battery and long life lithium battery specifications. Can operate using an external power supply from 5V DC to 15V DC. ●Incorporates the transmission control function which decreases the transmission frequency to extend the battery life when connected with a sensor with a high frequency of alarm activation.

●AC adapter <DC-1115>

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

When the protector is attached

Table type

●Lithium battery <U9VL> (10 pcs/pkg)

■SPECIFICATIONS

3-φ3 screw supported

Reference diagram for mounting

Battery life

Approx. 2 years (100 transmissions per day, at normal temperature)

Approx. 8 years (100 transmissions per day, at normal temperature)

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Mounting position

Indoor

One-shot transmission/repeat transmission switchover function Controlled transmission function Included functions Battery exhaustion alarm function Regular transmission function Body tamper Weight Appearance

Approx. 105g (including battery)

Approx. 100g (including battery)

ABS resin (white)

WIRELESS SECURITY SYSTEM ■SHOCK SENSOR TRANSMITTER

TX-102SK

●By setting the shock detection dedicated to TX-102A, this unit detects the shock to the body or installation surface of the body and transmits a signal. ●The transmission function is the same as that of TX-102A.

■SPECIFICATIONS Model No.

TX-102SK

Input signal

When detecting the shock

Voltage

9V DC (alkaline battery) Approx. 1 year (1 transmission per day)

Battery life

■EXTERNAL DIMENSIONS (UNIT: mm) 64 32

Grommet (knockout)

Operating frequency band (output)

426MHz band (10mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

100

Battery exhaustion function/Regular Included functions transmission function/Transmission mode changeover function/Tamper function

■OPTIONAL ACCESSORIES ●Lithium battery <U9VL> (10pcs/pkg)

Mounting position

Indoor

Ambient temperature range

-10ºC to +50ºC

Weight

Approx. 130g

Appearance

ABS resin (white)

TX-101K

■OPTIONAL ACCESSORIES

■EXTERNAL DIMENSIONS (UNIT: mm)

7.1

●Alarm device for the theft or vandalism of drawings or exhibitions by detecting the tilt of objects with this device mounted. ●Transmits the alarm signal when the object tilts by approximately 20 , regardless of direction. ●Simply installed by placing the UP mark of the device upward and fixing using the attached Velcro. ●The battery normally lasts around 2 years when transmitting once a day. ●Utilizes a coin type lithium battery for simple replacement. ●Monitors the radio wave arrival status using the regular transmission function. ●Transmits the battery exhaustion signal to the receiver and the body indicator blinks when the battery voltage drops below a certain level.

■TILT DETECTION TRANSMITTER

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

■SPECIFICATIONS Model No.

TX-101K

Voltage

3V DC (coin-type lithium battery: CR-2032 included) Approx. 2 years (1 transmission per day)

●Installation stand <BS-101K>

Battery life

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency band (output)

426MHz band (3mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Battery exhaustion alarm function/Regular Included functions transmission function/One-shot transmission

■MAGNET SWITCH TRANSMITTER

■EXTERNAL DIMENSIONS (UNIT: mm) Magnet

12 100

Housing 23

■OPTIONAL ACCESSORIES

Appearance

ABS resin (white)

■SPECIFICATIONS Model No.

TX-102MG

Input signal

Magnet switch Detection distance 15 mm max.

Voltage

9V DC (alkaline battery) or 10 to 15V DC Approx. 2 years (10 transmissions per day)

Battery life

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency band (output)

426MHz band (10mW max.)

Radio wave ]arrival distance

Approx. 100m (line-of-sight distance)

Detection system

Magnet switch

Operating distance

15mm max.

Battery exhaustion function/Regular Included functions transmission function/Transmission mode changeover function/Tamper function

Reed switch

●Lithium battery <U9VL>(10 pcs/pkg)

Approx. 40g (including battery)

Reed switch

-10ºC to +50ºC

Weight

TX-102MG

●Wireless magnet switch by adding the dedicated switch unit on TX-102A. ●The installation position can be freely selected, since this unit has three detection points: upper side, and both right and left sides of the body. ●The transmission function is the same as that of TX-102A.

Ambient temperature range

●AC adapter <DC-1115>

Mounting position

Indoor

Ambient temperature range

-10ºC to +50ºC

Weight

Housing: Approx. 124g Magnet: Approx. 12g

Appearance

ABS resin (white)

■STICK SENSOR TRANSMITTER

TX-102S400

TX-102S600

TX-102S780

●A transmitter combining TX-102A with the stick sensor. ●Can be installed on various types of windows, like glass louver or fixed windows. Outputs the detection signal when the installed pole is removed, and transmits the signal via the radio wave to the receiver. ●Three types are available according to the window frame size. (Stick size: 400mm, 600mm, 780mm) ●The transmission function is the same as that of TX-102A. ●Has a radio wave arrival distance of approx. 100m (lineof-sight distance)

Grommet 8 x 6: Same on the opposite side (knockout) 2-φ3 screw supported (knockout) Grommet 2-3.5×6 2-φ3 screw supported (knockout) (knockout) 6

<Transmitter> 64 32

Stick sensor 100,000 operations min.

Ambient temperature range

-25ºC to +60ºC

Mounting position

Outdoor, indoor (Caulking necessary on the terminals for outdoor installation) Approx. 90g

Approx. 110g Approx. 130g

Appearance

Pole, pole end: Stainless Base, cover: PC resin (bronze)

Power supply

9V DC alkaline battery, 6LR61 (lithium battery U9VL) or external power supply of 10 to 15VDC (40mA)

Transmitter

Approx. 2 years (10 transmissions per day, at normal temperature) *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Mounting position

Indoor (wall mounting)

One-shot transmission/repeat transmission switchover function Included functions Battery exhaustion alarm function Regular transmission function Body tamper

Grommet (knockout)

100

Grommet (knockout)

TX-102S400 TX-102S600 TX-102S780

Switching life

Battery life

φ6

52 19

φ11

SK-400：MAX400 2-Φ3 screw supported 2-φ3 screw supported SK-600：MAX600 (knockout) (knockout) SK-780：MAX780 16 30 28 16 20 20 Adjustment screw Adjustment screw Adjustment width 20 Adjustment width 20

■ INSTALLATION EXAMPLE

Model No.

Weight

■EXTERNAL DIMENSIONS (UNIT: mm)

6.25

■SPECIFICATIONS

Weight

Approx. 120g (including battery)

Appearance

ASA resin (white)

*The transmission part is the same as that of TX-102A.

■WATERPROOF STICK SENSOR TRANSMITTER

TX-119S400

●A transmitter combining the waterproof contact input transmitter TX-119 with the stick sensor SK-400/600/780 (bronze color only). ●Suitable for the alert of jalousie windows in the bathroom as both the stick sensor and transmitter are waterproof. ●The stick sensor and 2m long connection cable are attached with the transmitter body. ●Switchable between the one-shot and repeat transmission modes ●The transmitter includes an anti-tampering function.

TX-119S600

TX-119S780

■SPECIFICATIONS Model No.

TX-119S400 TX-119S600 TX-119S780 Stick sensor

Switching life

100,000 operations min.

Ambient temperature range

-25ºC to +60ºC

Mounting position

Outdoor, indoor (Caulking necessary on the terminals for outdoor installation)

Weight

Approx. 90g

Approx. 110g

Approx. 130g

Appearance

Pole, pole end: Stainless Base, cover: PC resin (bronze)

Power supply

AAA alkaline battery LR03 x 2 (3V DC)

Transmitter Adjustment screw Adjustment width 20

Adjustment screw Adjustment width 20

Approx. 2 years (20 transmissions per day) Battery life

■EXTERNAL DIMENSIONS (UNIT: mm)

<Sensor> TX-119S400 : MAX400 16

Adjustment screw Adjustment width 20

156

6.25

Switch side

φ3

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Mounting position

Indoor, outdoor

Included functions

One-shot transmission/repeat transmission switchover function Controlled transmission function Battery exhaustion alarm function Regular transmission function Body tamper

2-φ3 screw supported (knockout)

Weight

Approx. 100g (including battery)

Appearance

ASA resin (bronze)

Spring side Grommet 8x 6: Same on the opposite side (knockout)

4.5

5.5

Adjustment screw Adjustment width 20

Grommet 8x 6: Same on the opposite side (knockout) 2-φ3 screw supported (knockout)

Approx. 100m (line-of-sight distance)

41 6

Grommet 2-3.5 x 6 (knockout) Adjustment screw Adjustment width 20

2-φ3 screw supported (knockout)

Adjustment screw Adjustment width 20

52 19

102.7 166.2

Connection cord (length 2m)

Radio wave arrival distance

2-φ3 screw supported (knockout) 20

φ11

φ6

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

R10 10

2-φ4 screw supported

Installed inside the window frame (Front)

Exposed/embedded wiring outlet 16

Reference diagram for mounting

Installed outside the window frame (Side)

WIRELESS SECURITY SYSTEM ■WATERPROOF STICK SENSOR TRANSMITTER

TX-119LS400

TX-119LS600

●Transmitter by combining waterproof contact input transmitter TX-119 with the stick sensor SK-400/600/780 (bronze color only). ●Suitable for the alert of jalousie windows in the bathroom as both the stick sensor and transmitter are waterproof. ●The stick sensor and 2m long connection cable are attached with the transmitter body. ●Switchable between the one-shot and repeat transmission modes ●The transmitter includes an anti-tampering function.

■SPECIFICATIONS Model No.

TX-119LS780

TX-119LS400 TX-119LS600 TX-119LS780 Stick sensor

Switching life

100,000 operations min.

Ambient temperature range

-25ºC to +60ºC

Mounting position

Outdoor, indoor (Caulking necessary on the terminals for outdoor installation)

Weight

Approx. 90g

Approx. 110g Approx. 130g

Pole, pole end: Stainless Base, cover: PC resin (bronze)

Appearance

Transmitter Adjustment screw Adjustment width 20

■OPTIONAL ACCESSORIES

Adjustment screw Adjustment width 20

Dedicated lithium battery CR17450E-R-CM1 x 1 (3V DC)

Power supply

Approx. 8 years (20 transmissions per day) Battery life

●Lithium battery <CR17450E-R-CM1> ■EXTERNAL DIMENSIONS (UNIT: mm) <Transmitter>

<Sensor> 22 16

Adjustment screw Adjustment width 20

φ6

φ11 156

52 19

102.7 166.2

Connection cord (length 2m)

Grommet 8x 6: Same on the opposite side (knockout) 2-φ3 screw supported (knockout)

6.25 Grommet 2-3.5 x 6 (knockout)

φ3

Approx. 100m (line-of-sight distance)

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher)

Mounting position

Indoor, outdoor

One-shot transmission/repeat transmission switchover function Controlled transmission function Included functions Battery exhaustion alarm function Regular transmission function Body tamper Weight

Approx. 100g (including battery)

Appearance

ASA resin (bronze)

Grommet 8x 6: Same on the opposite side (knockout)

4.5

5.5

Adjustment screw Adjustment width 20

2-φ3 screw supported (knockout)

Radio wave arrival distance

Spring side

Switch side Adjustment screw Adjustment width 20

2-φ3 screw supported (knockout) 20

TX-119LS400 : MAX400

2-φ3 screw supported (knockout) 20

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

R10 10

Installed inside the window frame (Front)

2-φ4 screw supported Exposed/embedded wiring outlet

Installed outside the window frame (Side)

Reference diagram for mounting

■GLASS BREAKAGE SENSOR TRANSMITTER

TX-102GS

●A transmitter combining the contact input transmitter TX102A with the glass breakage sensor GS-03. ●Detects the special vibration frequency generated when glass breaks. ●Has a piezoelectric glass breakage sensor to bond to the glass of window or shop window. ●Up to 10 dedicated glass breakage sensors (GS-03) can be connected.

■SPECIFICATIONS Model No.

TX-102GS

Detection system

Piezoelectric

Power supply Battery life

* Dedicated adhesive (Optional) KE-347T

■EXTERNAL DIMENSIONS (UNIT: mm) <Transmitter>

Grommet (knockout) 64 32

φ37

Operation indicator 15

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency band (output)

426MHz band (10mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Mounting position

Indoor

Ambient temperature range

-10ºC to +50ºC

Weight

Transmitter: Approx. 120g Sensor: Approx. 30g

Appearance

ABS resin (white)

■Detection Area Diagram 950

100

Alkaline battery 6LR61 (9V DC) included Approx. 2 years (10 transmissions per day)

m 0c

Half stripped

■OPTIONAL ACCESSORIES

When installed in the corner of the glass surface Detection area: Fan-like form with a radius of R around the sensor When installed in the center of the glass surface Detection area: Circle form with a radius of R around the sensor * R depends on the glass thickness.

●Lithium battery <U9VL>(10 pcs/pkg)

●GS checker <EG-01>

●Dedicated adhesive <KE-347T>

●Glass breakage sensor <GS-03>

Glass thickness 6mm max. 6mm min.

Detection area R-300 x Glass thickness (mm) R=1800mm (constant)

■GLASS BREAKAGE SENSOR TRANSMITTER

TX-116GS

TX-116GSL

●Detects the glass breakage of a window, door or shop window. ●A transmitter combining TX-116 with the glass breakage sensor GS-04. ●Has a piezoelectric glass breakage sensor to bond to the glass surface. ●Alert area: 180 cm radius and less (On glass surface) ●Two types are available: alkaline battery and long life lithium battery. ●Up to 10 dedicated glass breakage sensors (GS-04) can be connected. * Dedicated adhesive (Optional) KE-347T

■SPECIFICATIONS Model No.

TX-116GS

AA alkaline battery: Approx. 2 years Lithium battery CR17450E-R2CM2: Approx. 8 years (1 transmission per day)

Battery life

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Radio wave arrival distance

■EXTERNAL DIMENSIONS (UNIT: mm) Grommet 10×7.5 (knockout)

Grommet 7.5×9 (knockout: right and left available) 21.2

Weight

Glass breakage sensor: Approx. 40g Transmitter: Approx. 100g (including battery)

Appearance

ABS resin (white)

Grommet 6.2×9.5 (knockout)

930

( 11 )

●Glass breakage sensor <GS-04>

3-φ3 screw supported

■GLASS BREAKAGE SENSOR TRANSMITTER

Reference diagram for mounting

TX-112

●A transmitter combining the sound collecting glass sensor with the transmission unit. ●Two different ultrasonic wave detection circuits securely catch the breaking sound (ultrasonic wave band) generated by the shock in the flat glass of the window or shop window, and a radio wave is transmitted. ●The angle can be adjusted both horizontally and vertically to set the best detection area. ●The sensitivity can be set according to the installation conditions. ●Regular transmission function is available to regularly notify the transmitter condition to the corresponding receiver to check for errors such as transmitter breakage. ●Two modes are selectable for the indicator: the check mode to check the peripheral ultrasonic wave environment and the sensor operation status, and the alert mode when the indicator displays nothing during an alert. ●Equipped with an anti-tampering function to notify of when the sensor is removed due to vandalism or on purpose. ●The power supply is 10 to 16V DC, or the dedicated AC adapter DC-1115 is required. (Note that this unit does not operate using a battery.)

■EXTERNAL DIMENSIONS (UNIT: mm)

72 37.4

Front mark ■OPTIONAL ACCESSORIES

●Dedicated lithium battery <CR17450E-R-2-CM2>

φ37

83.5 (mounting pitch) 61

●Dedicated adhesive <KE-347T> 140

●GS checker <EG-01>

120 (mounting pitch)

( 9)

Approx. 100m (line-of-sight distance)

Battery exhaustion function/Regular transmission function Included functions Transmission mode changeover function/ Tamper function/Controlled transmission function

<Transmitter> ■OPTIONAL ACCESSORIES

TX-116GSL

AA alkaline battery x 2 Lithium battery CR17450E-R2CM2

Voltage

■SPECIFICATIONS Model No.

TX-112

Detection system

Ultrasonic wave collection system

Alert area

Vertical direction: 8m Horizontal direction: 7m (when mounted on the ceiling)

Area angle adjustment range

Vertical direction: 36ﾟ (3ﾟ pitch) Horizontal direction: 25ﾟ (at the base mounting hole)

Voltage

10 to 16V DC or dedicated AC adapter (DC-1115)

Consumption current

Standby: 25mA max. Transmission: 80mA max.

Operating frequency band (output)

426MHz band (10mW max.)

Radio wave arrival distance

Approx. 100m (outdoor line-of-sight distance)

Antenna

Incorporated

Regular transmission function, Tamper Included functions function, Alarm memory function, Environment check function Mounting position

Indoor (on the ceiling or wall)

Ambient temperature range

-10ºC to +50ºC (no condensation)

Weight

Approx. 230g

Appearance

Housing: ABS resin (white) Cover: PE resin (white)

■Detection Area Diagram

●Dedicated AC adapter <DC-1115>

●Glass checker <EG-1000>

φ98.5 φ111 Front

(Front view)

(Side view)

Front mark ［ｍ］ Front １２３４ 6 5 ４３２１

４３２１

［ｍ］１２３４ 5 6

１

２

３

４５

４

６７

６

８［ｍ］

５７

(36°va ria (3°p ble) itch)

８［ｍ］

Sensitivity volume: Max. (H)

WIRELESS SECURITY SYSTEM ■PENDANT/WATCH TYPE TRANSMITTER

TX-104B TX-104P TX-104K

●Portable compact transmitter to be used via one touch operation. ●Three types are available; watch type (TX-104B), pendant type (TX-104P), and key ring type (TX-104K). Selectable according to your purpose. ●Two transmission modes are available: one-shot transmission which transmits the radio wave once every push of two buttons on the right and left sides at the same time, and continuous transmission which keeps transmitting until reset. ●Has a simple waterproof structure, which enables use in places exposed to water, such as a kitchen or bathroom. ●The battery normally lasts around 2 years when transmitting once a day. ●Utilizes a button type alkaline battery for simple replacement. ●Monitors the radio wave arrival status using the regular transmission function. ●Transmits the battery exhaustion signal to the receiver and the body indicator blinks when the battery voltage drops below a certain level.

Model No.

TX-104B

Type

Watch type

TX-104P

TX-104K

Pendant type Key ring type

3V DC button-type alkaline battery (LR44 x 2) included

Voltage

Approx. 2 years (1 transmission per day) *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Battery life Operating frequency band (output)

426MHz band (10mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Battery exhaustion function/Regular transmission function/Transmission mode Included functions changeover function/Simple water protection structure Ambient temperature range

-10ºC to +50ºC

Weight

Approx. 20g (transmitter body including battery)

Appearance

Housing: ABS resin (gray)

■EXTERNAL DIMENSIONS (UNIT: mm)

Watch type (belt size 18mm)

14.4

* One-side push type is also available. TX-104B-S (Watch type) TX-104P-S (Pendant type) TX-104K-S (Key ring type) Simple one-side push type is most suitable for elderly people.

■SPECIFICATIONS

35 Pendant type

■PENDANT TYPE WATERPROOF TRANSMITTER

TX-110

●A pendant type transmitter to be used with a simple light push of the button. ●Two transmission modes are available: one-shot transmission mode to transmit three times every 2.1 sec. every push of the button, and continuous transmission mode which keeps transmitting until reset. ●A waterproof transmitter for daily life which can be used in the kitchen or bathroom while attached. (Do not immerse in water.) ●The battery normally lasts around 2 years when transmitting once a day. ●Monitors the radio wave arrival status using the regular transmission function. ●Transmits the battery exhaustion signal to the receiver and the body indicator blinks when the battery voltage drops below a certain level.

■EXTERNAL DIMENSIONS (UNIT: mm)

20.3

45.2

Key ring type

■SPECIFICATIONS Model No.

TX-110

Type

Pendant type

Voltage

3V DC button-type alkaline battery (LR44 x 2) included Approx. 2 years (1 transmission per day)

Battery life

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency band (output)

426MHz band (10mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

One-shot transmission/Continuous transmission changeover function, Battery Included functions exhaustion function, Regular transmission function Ambient temperature range

-10ºC to +50ºC

Weight

Approx. 45g (including battery and neck strap)

Appearance

ABS resin (white)

■PENDANT TYPE TRANSMITTER

TX-122

●A pendant type transmitter to be used with a simple light push of the button. ●Erroneous operation can be avoided because the alarm is transmitted when pushing two buttons on the right and left side at the same time. ●Two transmission modes are available: one-shot transmission which transmits the radio wave once, and continuous transmission which keeps transmitting until reset. ●Monitors the radio wave arrival status using the regular transmission function at the receiver. ●Transmits the battery exhaustion signal to the receiver and the body indicator blinks when the battery voltage drops below a certain level. ●Utilizes a general coin type lithium battery (CR2032) for simple replacement. ●The battery normally lasts around 2 years when transmitting once a day.

■EXTERNAL DIMENSIONS (UNIT: mm)

■SPECIFICATIONS Model No.

TX-122

Voltage

3V DC (coin-type lithium battery [CR2032] x 1) Approx. 2 years (1 transmission per day) *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Battery life

Transmission output

3mW max.

Antenna

Incorporated

Radio wave arrival distance

100m max. (line-of-sight distance)

Indicator (red LED)

Transmission: ON Battery exhaustion alarm: Blinks

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC.) One-shot transmission/Continuous transmission changeover function Battery exhaustion function, Regular transmission function

Included functions Weight

■ALARM PUSH BUTTON TRANSMITTER

●A push button transmitter equipped with the alarm function, which enables on-the-spot intimidation and/or site identification using sound. ●When pressing the emergency button, an alarm of approximately 95dB rings and the signal is repeatedly transmitted until the reset button is pressed. ●A soft case is available to attach the transmitter to a belt. ●Equipped with a transmission delay timer to prevent erroneous operation. ●Notifies of battery exhaustion with blinking of the body indicator. ●Can also transmit radio waves without ringing the alarm.

ABS resin (white, red)

Accessories

Coin-type lithium battery (CR2032) Neck strap

■SPECIFICATIONS Model No.

TX-117

Voltage

9V DC alkaline battery:6LR61 (6LF22)

Battery life

Approx. 1 year (when transmitting once a day, and ringing the alarm for 10 sec. at normal temperature) *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency

Soft case (Accessory)

426MHz band (wireless equipment of low power security system)

Output

10mW max.

Antenna

Incorporated

Radio wave arrival distance

100m max. (line-of-sight distance)

Alarm output

Semiconductor switch output (with polarity) Continuous output until the recovery button is pressed Contact rating: 28V, 0.2A (ON resistance approx. 3.5Ω) JIS C6560 complied small single headed plug supported (mini plug with a diameter of 3.5mm)

Transmission delay timer

0 (None), 5, 10, 15 sec.

■EXTERNAL DIMENSIONS (UNIT: mm)

104

Approx. 25g (including battery)

Appearance

TX-117

Transmission part

When the neck strap is attached

426MHz band (wireless equipment of low power security system)

Transmission frequency

20.5

Operation switch

Alarm sound

Emergency/Recovery buttons Preliminary alarm (beep, beep, beep, beep) Full alarm (Piririri, piririri) With/without the alarm sound: Changeable Sound volume: Approx. 95dB/1m (Volume may be extremely low when the battery is exhausted.)

Indicator (red LED)

Transmission: ON Battery exhaustion: Blinks

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Included functions

Battery exhaustion function/ Regular transmission function

Weight

Approx. 140g (including battery and soft case)

Appearance

Housing: ABS resin (black) Soft case: PU resin (transparent, black)

WIRELESS SECURITY SYSTEM ■WATCH TYPE TRANSMITTER

TX-111-S (G)

TX-111 (B)

TX-111-S (BL)

●A portable transmitter, with the transmission function incorporated in an analog watch. ●One-shot transmission available with a simple light push of the button. ●10 air pressure waterproof, available to use in bathroom or pool while attached. ●The battery normally lasts around 3 years when transmitting once a day. ●Monitors the radio wave arrival status using the regular transmission function. ●Transmits the battery exhaustion signal to the receiver and the body indicator blinks when the battery voltage drops below a certain level. ●Belt: 3 colors (Gray, Brown, Black)

■SPECIFICATIONS Model No.

Battery life

Minute hand

Approx. 100m (line-of-sight distance)

Included functions

Analog watch, 10 air-pressure waterproof structure, Battery exhaustion alarm function, Regular transmission function

Ambient temperature range

-5ºC to +55ºC

Time display

Analog: 3 hands (hour, minute, second) Approx. 41g ABS resin (gray)

ABS resin (black)

ABS resin (brown)

■OPTIONAL ACCESSORIES ●Battery replacement kit

43.5

Second hand

426MHz band (3mW max.)

18 (band width)

Emergency button

Hour hand

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Radio wave arrival distance

Appearance 15.65

TX-111-S (BL)

Approx. 3 years (1 transmission per day, at normal temperature)

Weight

TX-111 (B)

3V DC coin-type lithium battery (CR2025) included

Operating frequency band (output)

■EXTERNAL DIMENSIONS (UNIT: mm)

Band

TX-111-S (G)

Voltage

Watch stem

Indicator for checking notification

■WATCH TYPE TRANSMITTER

TX-111C-S (G)

TX-111C-S (BL)

●Continuous transmission type of TX-111. ●Transmission continues until reset, suitable for emergency calls. ●Belt: 2 colors (Gray, Black)

■EXTERNAL DIMENSIONS (UNIT: mm)

■SPECIFICATIONS Model No. Voltage

Battery life

38 Band

Hour hand

Emergency button 43.5

Minute hand

15.65

Second hand Watch stem

Indicator for checking notification

18 (band width)

Operating frequency band (output)

TX-111C-S(G)

Approx. 3 year (stanby) Approx. 1 hour for continuous transmission (with a new battery) *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

426MHz band (3mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Included functions

Analog watch, 10 air-pressure waterproof structure, Battery exhaustion alarm function, Regular transmission function

Ambient temperature range

-5ºC to +55ºC

Time display

Analog: 3 hands (hour, minute, second)

Weight Appearance

Approx. 48g ABS resin (gray)

■OPTIONAL ACCESSORIES ●Battery replacement kit

TX-111C-S(BL)

3V DC coin-type lithium battery (CR2025) included

ABS resin (black)

■MAGNET SWITCH TRANSMITTER (ONE PIECE TYPE)

TX-115 (B) TX-115 (W) TX-115 (G)

●A switching sensor transmitter with the magnet switch built in. ●One sensor unit is enough to detect a double window if installed on the top of a sash crescent. ●Can be installed on the door, window, or other opening parts. ●No wiring is required between the transmitter and magnet switch, which does not affect the appearance. ●A waterproof transmitter which can be used in the bathroom ●Two types are available: alkaline battery or long life lithium battery. ●Has a radio wave arrival distance of approx. 100m (line-of-sight distance)

TX-115L (B) TX-115L (W) TX-115L (G)

■EXTERNAL DIMENSIONS (UNIT: mm)

3-φ4 screw supported

Center in the detection area

Magnet

2-φ4 screw supported

Main unit

■OPTIONAL ACCESSORIES

Reference diagram for mounting

■SPECIFICATIONS Model No.

TX-115 (B)

Power supply

●Lithium battery <CR17450E-R-CM1>

TX-115 (W)

TX-115 (G)

TX-115L (B)

AAA alkaline battery LR03 x 2

TX-115L (W)

TX-115L (G)

Lithium battery: CR17450E-R-CM1

Operating distance

20mm max. (between magnet and switch)

Battery life

AAA alkaline battery: Approx. 2 years Lithium battery R17450E-CM1: Approx. 8 years (20 transmissions per day) *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Included functions

Battery exhaustion function, Regular transmission function, Tamper transmission function

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Weight

Approx. 80g (including battery) ASA resin

Appearance

Dark brown

White

Gray

Dark brown

White

Gray

■MAGNET SWITCH TRANSMITTER (SEPARATE TYPE) TX-115C (B) TX-115C (W) TX-115C (G) TX-115CL (B) TX-115CL (W) TX-115CL (G) ●A switching sensor transmitter with the magnet switch separated externally using a lead wire. ●As the switch part is separated, this unit can be installed even on a single window, where there is a narrow space between the inside net window and main window. ●Can be installed on the door, window, or other opening parts. ●A waterproof transmitter which can be used in the bathroom ●Two types are available: alkaline battery or long life lithium battery. ●Has a radio wave arrival distance of approx. 100m (line-of-sight distance)

■OPTIONAL ACCESSORIES ●Lithium battery <CR17450E-R-CM1>

■EXTERNAL DIMENSIONS (UNIT: mm)

■SPECIFICATIONS Model No.

Power supply

Magnet

156

166.2

2.8

2-φ3 screw supported

102.7

50 40

Cord length: 200mm

2-φ screw supported

4.5

Switch

R10

Main unit 50

12 16

2-φ3 screw supported

TX-115C (B)

TX-115C (W)

TX-115C (G)

TX-115CL (B)

AAA alkaline battery LR03 x 2

TX-115CL (W) TX-115CL (G)

Lithium battery: CR17450E-R-CM1

Operating distance

20mm max. (between magnet and switch)

Battery life

Included functions

Battery exhaustion function, Regular transmission function, Tamper transmission function

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Weight

Approx. 87g (including battery)

Appearance

ASA resin Dark brown

White

Gray

Dark brown

White

Gray

Reference diagram for mounting

WIRELESS SECURITY SYSTEM ■PASSIVE SENSOR TRANSMITTER

TX-103

●Catches the change of photoelectric energy caused by the movement of human body or other objects, and transmits an alarm signal. ●Available for both indoor and outdoor use. ●Four types of detection areas can be selected according to the application. ●Can be installed freely, like on the ceiling or wall, as well as on the pole using optional accessories. ●Has an operation restriction timer built in to reduce battery consumption as much as possible. ●The battery normally lasts around 2 years when transmitting 100 times a day. ●Commercially available alkaline batteries can be used. Note that the battery life is one year in this case. ●Monitors the radio wave arrival status using the regular transmission function. ●Transmits the battery exhaustion signal to the receiver and the body indicator blinks when the battery voltage drops below a certain level. ●Can be installed outdoor at ease with the attached filter to reduce the effect of sunshine.

■EXTERNAL DIMENSIONS (UNIT: mm)

■DETECTION AREA DIAGRAM

10m

11.5m

Mounting height 0.8 to 1.5m ＊＊ 1.2m 0 5 10m When used outdoor ＊Zone masking

●Spot

Mounting height 0.8 to 1.5m 1.2m 0

20m

●Battery attached separately <BA-103>

Motion range 180° 0.3m 30 stme ° nt ra nge

0.3m 60° Adjustment range

0.2m 64° 2.7m 4m

●Magnetic sheet (For magnet attachment) <BR-M5> *2

TX-114

12m

234

209.5

107

tion

pitc

Reference diagram for mounting

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Battery exhaustion function, Regular Included functions transmission function, Operation restriction timer function Mounting position

Indoor, outdoor (rainproof)

Ambient temperature range

-10ºC to +50ºC

Weight

Approx. 212g (excluding battery)

Appearance

Housing: AES resin (white) Cover: PE resin (white)

●Pole attachment <BP-12>

●Ceiling and wall mount attachment <BCW-401> *2

*1 BP-12 is required. *2 BW-14 is required. *3 Used to install on a commercially available embedded switch box

■SPECIFICATIONS Model No. Detection system

TX-114

TX-114L Twin system

Alert area

2-step fan shape (90º) x 1

Power supply

TX-114: AA alkaline battery x 2 TX-114L: Lithium battery CR17450E-R2CM2 (AC adapter only for the optional accessory) AA alkaline battery: Approx. 2 years Lithium battery CR17450E-R2CM2: Approx. 5 years (1 transmission per day) *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Battery exhaustion function, Regular transmission function, Tamper transmission function, Device error alarm function, Detection Included functions sensitivity changeover function, Count cycle changeover function, Controlled transmission function, Day/Night determination switch Ambient temperature range

-10ºC to +50ºC (no condensation) (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Mounting position

Indoor, outdoor (rainproof)

Weight

Approx. 510g (Including the weight of battery 50g)

Appearance

Housing: AES resin Window: PE resin

■OPTIONAL ACCESSORIES 10m

10m

12m

Horizontal area

12m Fine Fine 3° 3° adjustment adjustment

[Plan view]

When the wall is on alert 10m 12m Unnecessary area is masked. Downward area Detection distance settable with angle adjustment of downward area Adjustment range 12m to 3m (9 levels) 0

426MHz band (10mW max.)

●Wall mounting bracket <BW-14> *3

10m

[Side view]

Cover lock screw

Operating frequency band (output)

Battery life

90° Adjustment range: 90° Motion range: 180°

[Plan view]

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Battery life

12m

Horizontal surface alert

BA-103 Approx. 2 years (100 transmissions per day)

TX-114L

10m

2-4 screw supported

Optional power supply

Applicable pole diameter ø38 to ø43mm

■DETECTION AREA DIAGRAM

Wide, long, curtain, spot selectable 9V DC lithium battery (U9VL) included

●Pole cover <BP-11> *1

●Detects both horizontal and downward areas to avoid erroneous operation when a dog or cat walks by, or due to an extended detection area, and achieves stable outdoor protection. ●Low power wireless type that enables outdoor peripheral protection without wiring. ●Two types are available: alkaline battery or long life lithium battery. ●An optional AC adaptor can be connected in a place with high transmission frequency. ●Has a radio wave arrival distance of approx. 100m (line-of-sight distance)

Indicator

Detection area Standard power supply

Adju

■PASSIVE SENSOR TRANSMITTER

■EXTERNAL DIMENSIONS (UNIT: mm)

TX-103 Passive infrared system

(Note)●When using the passive sensor transmitter outdoors, it is limited to simple applications (e.g. not causing serious impact on your system or trouble to the surroundings). ●Please note that the passive sensor transmitter may generate false alarms or not generate the alarm when a 77 70 background object in the outdoor detection zone is influR35 enced by a temperature change due to the climate. Cover lock screw ●For the above reasons, we recommend you include the outdoor infrared, combination, or fence sensors as the outdoor sensor intended for full-scale security application. ■OPTIONAL ACCESSORIES

Motion range 180°

Mounting 2m height 3m

Model No. Detection system

171

6°Adjustment range

1.2m

6°Adjustment range

64°

Motion range 180°

ran

Mounting height 0.8 to 1.5m

6°Adjustment range (When the lock tab is cut)

en t

jus

5°

t ra

m ust

●Long Adjustment range 180°

●Curtain Adjustment range 180°

●Wide

■SPECIFICATIONS

5m Motion range

●Dedicated AC adapter <DC-0330-C>

●Pole attachment <BP-22>

●Wall mounting bracket

Applicable pole diameter: <BW-24> φ38 to φ43mm

■PASSIVE SENSOR TRANSMITTER

TX-105 (W, L, R, S)

TX-105 (WL, LL, RL, SL)

●A passive sensor transmitter for indoor ceilings, available with four types of alert areas and two types of power supplies. ●Easy to adjust detection sensitivity, count frequency, and controlled transmission function using the switch in 4 steps, according to the surrounding environment and application ●Operation can be easily checked using two test modes: walk and transmission tests. ●The battery normally lasts around 2 years [TX-105 (W, L, R, S)] and 8 years [TX-105 (WL, LL, RL, SL)] when transmitting 100 times a day. ●Monitors the radio wave arrival status using the regular transmission function. ●Equipped with an anti-tampering function to notify when the sensor is removed due to vandalism or on purpose. ●Transmits the battery exhaustion signal to the receiver and the body indicator blinks when the battery voltage drops below a certain level. ●If an error occurs in the internal sensor circuit, the indicator will blink and the error signal is transmitted.

■OPTIONAL ACCESSORIES ●Battery attached separately <BA-105>

■DETECTION AREA DIAGRAM

84°Alert range Motion range （5°∼35°）

°5

3D (W), Surface (L), Round (R), Spot (S)

Standard power supply

AA alkaline battery x 2 included

Optional power supply

Dedicated lithium battery BA-105・DC-1115

BA-105・DC-1115

Approx. 2 years (100 transmissions per day)

Approx. 8 years (100 transmissions per day)

Battery life

20m

R (round)

S (spot）

Operating frequency band (output)

426MHz band (10mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance) Battery exhaustion function, Regular transmission function, Controlled transmission function, Operation test function Indoor (ceiling)

Ambient temperature range

-10ºC to +50ºC

Weight

Approx. 230g (excluding battery)

Appearance

Housing: ABS resin (white) Cover: PE resin (white)

■EXTERNAL DIMENSIONS (UNIT: mm)

φ111

67.5° 42° 25°

●Dedicated AC adapter <DC-1115>

67 . 5m 5°

30°

45°

●Dedicated lithium battery <CR17450E-R-2-CM2>

Dedicated lithium battery included

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

5°

9°

15°

10 12m

Passive infrared system

Detection area

76.5 37.4

8°

2.5m

30°

Area setting “B”1.3

●AA alkaline battery <LR-6>

23°

●Wall mount attachment <BL-5000>

2.5m

30°

61° 53°

Motion range （2°∼32°）

31°

Area setting “B”

TX-105 (WL, LL, RL, SL)

Detection system

Mounting position

41°

●Ceiling and wall mount attachment <BCW-401>

TX-105 (W, L, R, S)

Model No.

Included functions

L (surface)

W (3D)

■SPECIFICATIONS

φ4m

φ14m

■TWIN MIRROR TYPE PASSIVE SENSOR TRANSMITTER

TX-105TWL

●Two pairs of optical units are incorporated in the sensor, each of which has twin type elements. ●The 3D detection area (12m max.) comprised by two pairs of optical units helps to keep the best position according to the protection distance, regardless of the set length, and reduces erroneous operation due to environmental factors, including small animal intrusion. ●Equipped with the count changeover function to set the frequency from 1/2/3/4 times, using the mode selector according to the installation site. ●Equipped with the micro motion detection function to detect small movements of human beings. ●Incorporates the transmission control function to extend the battery life by switching the mode selector when used in a location of high detection frequency.(10, 120, 300, 900 sec.) ●The sensitivity can be set in 4 steps by switching the mode selector.Has a detection sensitivity switching function to realize the protection using the most appropriate sensitivity according to the installation site. ●Adjustment range: 120%, 100%, 80%, 60% ●Monitors the radio wave arrival status using the regular transmission function. ●The battery normally lasts around 6 years with the dedicated lithium battery installed. (Transmitting 100 times a day)

■DETECTION AREA DIAGRAM ■EXTERNAL DIMENSIONS (UNIT: mm)

84°

84.5 37.4

(Plan view)

φ98.5 φ111

4-φ9 8-φ4.2

1.5

35°

0.5

Model No.

TX-105TWL

Detection system

Passive infrared system

Alert area

3D alert, maximum length 12m, 17 pairs

Power supply

CR17450E-R-2-CM2: 1 set (Dedicated lithium battery) /3V DC-1115: 1 set (Dedicated DC pack)/11V

* Either of the options on the right

Battery life

Approx. 6 years (100 transmissions per day, at normal temperature) When using CR17450E-R-2-CM2 *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency band

426MHz band (wireless equipment of low power security system)

Output

10mW max.

Radio wave arrival distance

Approx. 100m (outdoor line-of-sight distance)

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Mounting position

Indoor: On the ceiling (Can be mounted on the wall using an optional attachment.)

Weight

Approx. 250g (excluding battery)

Appearance

Housing: ABS resin Cover: PE resin

■OPTIONAL ACCESSORIES ●Ceiling and wall mount attachment <BCW-401>

Reference diagram for mounting

(cross section of the maximum distance of center zone) 6.5°

φ66.7 φ83.5

35 ° °

35° 4-R2.1

52 °

35°

φ30 (grommet)

(Side view) .5° Motion range 19 （6.5°∼26°） 2.5m

35 °

° 35

4.2

■SPECIFICATIONS

10 12（m） Area setting “A”

●Dedicated lithium battery <CR17450E-R-2-CM2>

●Dedicated AC adapter <DC-1115>

WIRELESS SECURITY SYSTEM ■PASSIVE SENSOR TRANSMITTER

■EXTERNAL DIMENSIONS (UNIT: mm)

φ100

(mounting pitch) 66.7

6-φ4.2 (mounting pitch) 83.5

TX-123 (W, N, S, PI)

●Slim transmitter with a thickness of just 50mm, barely noticeable, and easily fits into its surroundings. ●The alert area is switchable to narrow the alert range due to erroneous operation in the alert area. Using the attached masking sheet, the zone on both sides (3D alert (W)) or maximun length zone (surface alert (N)) can be masked. ●Equipped with the count changeover function to set the desired frequency from 1/2/3/4 times using the mode selector and reduce erroneous operation according to the installation site. (W/S/PI/ WL/SL/PIL only) ●Incorporates the transmission control function (10, 300 sec.) to extend the battery life by switching the mode selector when used in a location of high detection frequency. ●Detection sensitivity changeover function available to switch detection sensitivity between High and Low, according to the installation environment and application (W/WL/N/NL only) ●Two types of batteries are available, long life lithium battery or easily accessed AA alkaline battery. Lithium battery type: Approx. 8 years (transmitting 100 times a day) AA alkaline battery: Approx. 2 years (transmitting 100 times a day) ●Monitors the radio wave arrival status using the regular transmission function. ●Equipped with an anti-tampering function to notify when the sensor is removed due to vandalism or on purpose. ●Equipped with a battery exhaustion signal function to send the signal when the battery voltage drops below a certain level.

■DETECTION AREA DIAGRAM

Model No.

TX-123

Area type

Passive infrared system

Alert area

W, WL: 3D alert, Maximum length 7m, 17 pairs N, NL: Surface alert, Maximum length 12m, 8 pairs S, SL: Spot alert, Maximum mount height 4m, 9 pairs PI, PIL: Horizontal alert, Maximum length 5m, 5 pairs

Included battery

Alkaline battery: TX-123 (W,N,S,PI) Lithium battery: TX-123(WL,NL,SL,PIL)

Power

CR17450E-R-2-CM2 (lithium battery):1 set/3V DC LR-6 (AA alkaline battery): 2 + Dedicated battery case/3V DC

Battery life

CR17450E-R-2-CM2: Approx. 8 years (100 transmissions per day, at normal temperature) LR-6: Approx. 2 years (100 transmissions per day, at normal temperature) *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency band

426MHz band (wireless equipment of low power security system)

Output

10mW max.

Radio wave arrival distance

Approx. 100m (outdoor line-of-sight distance)

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Weight

Standard

When the area masking sheet is used

Indoor ceiling

Approx. 150g (excluding battery)

Appearance

Housing: ABS resin

Cover: PE resin

When the area masking sheet is used

約9° 0ｍ

5ｍ

10ｍ

0ｍ

12ｍ

5ｍ

approx. 70°

alert (PI)

φ2.4m

Alert range

■Horizontal

■Spot alert (S)

■OPTIONAL ACCESSORIES

2.5m

12°

2.5m

12°

Zone masked

Maximum length zone masked

Approx. 30°

Alert range

Approx. 86°

Zone masked

●Ceiling and wall mount attachment <BCW-401>

●Dedicated ●Battery case <TYPE32-1> lithium battery <CR17450E-R-2-CM2>

■PASSIVE SENSOR TRANSMITTER

TX-106

TX-106WM

Passive sensor transmitter (desktop type) TX-106 Passive sensor transmitter (wall mount type) TX-106WM ●A transmitter with a security sensor, which detects human beings. ●Three types of detection areas can be selected according to the application. ●Easy to adjust detection sensitivity, count frequency, and controlled transmission function using the switch, according to the surrounding environment and application ●Operation can be easily checked using two test modes: walk and transmission tests. ●The battery normally lasts around 2 years when transmitting 100 times a day. ●Monitors the radio wave arrival status using the regular transmission function. ●Equipped with an anti-tampering function to notify when the cover is removed due to vandalism or on purpose. ●Transmits the battery exhaustion signal to the receiver and the body indicator blinks when the battery voltage drops below a certain level. ●If an error occurs in the internal sensor circuit, the indicator will blink and the error signal is transmitted.

■OPTIONAL ACCESSORIES

■SPECIFICATIONS Model No.

TX-106

●Dedicated AC adapter <DC-1115>

●AA alkaline battery <LR-6>

TX-106WM

Detection system

Passive infrared system

Detection area

Surface, 3D, line alert selectable

Standard power supply

AA alkaline battery x 2 included

Optional power supply

DC-1115

Battery life

Approx. 2 years (100 transmissions per day)

Operating frequency band (output)

426MHz band (10mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Battery exhaustion function, Regular transIncluded functions mission function, Controlled transmission function, Operation test function Mounting position

Indoor (wall mounting)

Indoor (desktop)

Ambient temperature range

-10ºC to +50ºC

Weight

Approx. 230g (excluding battery)

Appearance

Housing: ABS resin (white)

■DETECTION AREA DIAGRAM

45 (mounting pitch)

80 42

Reference diagram for mounting 48 42

゜

(When using DC-1115)

Angle adjustment range of the stand

Angle adjustment range of the stand ﾟ 90

Cover lock

(When using DC-1115)

64° Scale: 1/125

Scale: 1/150

L (line) 0m

Cover lock

10m

105

150

approx. 0.7m

150

5m 15° 30°

12穴 Cover

M (3D)

10m

20m

Approx. Approx. 1.3m 2m

W (surface)

(mounting pitch)

4-3 screw supported

＜TX-106WM＞

Stand Sensor

＜TX-106＞

64° approx. 1m

■EXTERNAL DIMENSIONS (UNIT: mm)

PIL

Detection system

■Surface alert (N)

■3D alert (W)

■SPECIFICATIONS

Indoor: On the ceiling Mounting position (Can be mounted on the wall using an optional attachment.)

Reference diagram for mounting

Standard

TX-123 (WL, NL, SL, PIL)

■MAT SWITCH TRANSMITTER

TX-109

●Transmits the signal generated when a mat is stepped on to the receiver via radio waves. ●Utilizes a coin type lithium battery, and no wiring is required. ●This waterproof type can be installed either indoors or outdoors, if on a flat surface, and used for various applications to detect an intruder or intrusion to a dangerous area. ■EXTERNAL DIMENSIONS (UNIT: mm) 716

■SPECIFICATIONS Model No.

TX-109 Transmitter

Power supply

Coin-type lithium battery (CR2032) included

Battery life

1 transmission per day: Approx. 2 years 20 transmissions per day: Approx. 1 year Transmission cycle: 10,000 times *The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency band (output)

426MHz band (3mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

616

Mat switch

Operation pressure

0.2 to 1.02kg/cm2

Non-sensible area

Perimeter 26mm

Structure

Waterproof

Mounting position

Indoor/outdoor flat places

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Weight

Approx. 8,000g

Appearance

EPDM (black)

EXH-TK1

●Generates an alarm and automatically transmits a low power wireless signal when the owner of this unit falls and remains down for more than the set time, which is regarded as an emergency. (Falling retention timer: can bet set to 10, 30, 60, and 120 sec.) ●Emergency calls are also available using the push button. ●Can be mounted around the belt of trousers using the attached soft case. ●Has a transmission delay timer function (Transmitted 10 seconds after the generation of the preliminary alarm) ●External notification is possible if the jack alarm output is connected to your PHS or mobile phone (excluding some models).

■EXTERNAL DIMENSIONS (UNIT: mm)

104

Soft case (Accessory)

150kg/cm2 max.

20.5

■SPECIFICATIONS Model No.

EXH-TK1

Power supply

9V DC alkaline battery: 6LR61

Battery life

Approx. 1 year (when transmitting once a day, and ringing the alarm for 10 sec. at normal temperature)

Transmission part

■FALLING DETECTION TRANSMITTER

Maximum allowable weight

Operating frequency band

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

426MHz band (wireless equipment of low power security system)

Output

10mW max.

Antenna

Incorporated

Radio wave arrival distance

100m max. (line-of-sight distance)

Tilt detection angle

60º to 135º from vertical line

Alarm output

28V・0.2A (ON resistance approx. 3.5Ω)

Timer settings

Falling detection timer: 10, 30, 60, 120 sec Transmission delay timer: 0 (None), 10 sec.

Operation switch

Emergency button Recovery button

Alarm sound

Preliminary alarm (beep, beep, beep, beep) Full alarm (Piririri, piririri)

Indicator (red LED)

Transmission (output): ON Battery exhaustion: Blinks

Included functions

Battery exhaustion function Regular transmission function

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Weight

Approx. 140g (including battery and soft case)

Appearance

Housing: ABS resin (black) Soft case: PU resin (transparent, black)

■SYSTEM CONFIGURATION DIAGRAM

Low electric power wave

Controller

●

Channel display panel Automatic notification device ●Flasher, indicator ●Sound alarm ● ●

Falling detection transmitter EXH-TK1

Approx. 100m (200m with repeaters)

Receiver Receiver unit Controller

WIRELESS SECURITY SYSTEM ■EXPLOSION PROTECTION/DRIP-PROOF FALLING DETECTION TRANSMITTER (FALLING CALL)

* If carried in the attached soft case, it provides the drip-proof structure ■EXTERNAL DIMENSIONS (UNIT: mm)

■SPECIFICATIONS Model No.

EXH-TKB1

Power supply

4.5V DC AAA alkaline battery (LR03) x 3

Battery life

Approx. 1 year (when transmitting (output) once a day, and ringing the alarm for 10 sec. at normal temperature)

Explosion protection structure

Intrinsically safety explosion protection (i)

Supported gas

Explosion class 2, ignition group G3

Official test acceptance number

No. T61940

Transmission part

●An explosion protection and drip-proof type transmitter, applicable to various sites. ●Generates an alarm and automatically transmits a low power wireless signal when the person having this unit falls down for more than the set time, which is regarded as an emergency. (Falling retention timer: can bet set to 10, 30, 60, and 120 sec.) ●Emergency calls are also available using the push button. ●Can be mounted around the belt of trousers using the attached soft case. ●Has a transmission delay timer function (Transmitted 10 seconds after the generation of the preliminary alarm)

Operating frequency band

426MHz band (wireless equipment of low power security system)

Output

10mW max.

Antenna

Incorporated

Radio wave arrival distance

100m max. (line-of-sight distance)

Tilt detection angle

60º to 135º from vertical line

Timer settings

Falling detection timer: 10, 30, 60, 120 sec Transmission delay timer: 0 (None), 10 sec.

Operation switch

Soft case (Accessory) 112 0° 天

300°

Detected

135°

復旧

Detected

地

60°

225°

180°

■FLAME SENSOR TRANSMITTER

■DETECTION AREA DIAGRAM Base unit (Transmission unit built-in) 69.5 37.4

(Front view: Ceiling mount) (Plan view: Wall mount)

φ98.5 φ111

Lock ring Sensor

Sensor head 30° e n rang Motio

Indicator (red)

35°

Indicator (red LED)

Transmission (output): ON Battery exhaustion: Blinks

Ambient temperature range

-10ºC to +50ºC (The battery function may deteriorate below 0ºC or at 40ºC or higher.)

Additional functions

Battery exhaustion function, Regular transmission function

Weight

Approx. 150g (including battery and soft case)

Appearance

Housing: ABS resin (black) Soft case: PU resin (transparent, black)

35 °

30º vari

Model No.

TX-107

Detection system

Ultra-violet detection system (Detection wave length 185 to 260nm)

Detection area

10m (7cm lighter flame in front)

Standard power supply

Dedicated lithium battery included (CR17450E-R-2-CM2)

Optional power supply

Dedicated AC adapter DC-1115 AA alkaline battery LR-6 Approx. 5 year (In the standby state including regular transmission)

Battery life

*The battery life is only for reference for the operation at normal temperature, which is not guaranteed.

Operating frequency band (output)

426MHz band (10mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Battery exhaustion function, Regular Included functions transmission function, Tamper transmission function, Controlled transmission function Mounting position

Indoor

Ambient temperature range

-10ºC to +50ºC

Weight

Approx. 260g (excluding battery)

Appearance

Housing: ABS resin

■OPTIONAL ACCESSORIES

2 4.

φ30 Detection Grommet element

■SPECIFICATIONS

8-φ4.2

●Ceiling and wall mount attachment <BCW-401>

●AC adapter <DC-1115>

●AA alkaline battery <LR-6>

●Dedicated lithium battery <CR17450E-R-2-CM2>

4-φ9 66.7 φ83.5 (Mounting pitch) Base mounting hole

able

Alarm sound

35°

(Side view: Ceiling/wall mount)

Condition Detection object：Gas lighter ﬂame (Flame height: 7cm approx.) Detection timer setting：H

Recovery button

TX-107

●A transmitter to detect the ultraviolet light included in flames with a high sensitivity by combining with the low power wireless security system receiver. ●The sensor head can be adjusted every 25 horizontally and 30 vertically in 4 steps according to the installation site. ●The sensitivity can be set to either of 2 steps; High or Low, and detection timer to one of 4 steps (1, 6, 15, and 30 seconds) according to the environment. ●Has a low power wireless system with a long radio wave arrival distance (with a line-of-sight distance of 100m), strong against interference. ●When the battery is used as the power supply, the indicator blinks to notify battery exhaustion. ●Notifies the receiver when the sensor is removed due to vandalism or on purpose. ●Monitors the radio wave arrival status using the regular transmission function. ■EXTERNAL DIMENSIONS (UNIT: mm)

Normal button

Preliminary alarm (beep, beep, beep, beep) Full alarm (Piririri, piririri) Sound volume: Approx. 90dB/1m

■DETECTION AREA DIAGRAM

EXH-TKB1

Front mark

■PHOTOELECTRIC SENSOR TRANSMITTER

TX-121

●A wireless transmitter built in to a photoelectric sensor. ●Suitable for home security with simple application to a window, fence, or boundary. ●Stable protection guaranteed with a 2 beam AND detection system with a vertical interval of 240mm ●Since the modulation frequency of photoelectric sensor beam can be adjusted between High and Low, interference with an adjacent sensor can be prevented. ●The shade time of the photoelectric beam can be adjusted. ●Horizontal adjustment of the photoelectric axis is possible. (Note: Vertical adjustment is not possible.) ●Repeatedly transmits the alarm signal every 20 seconds in the continuous transmission mode.

■EXTERNAL DIMENSIONS (UNIT: mm)

83.5 45 13

332

TX-121 Outdoor 15m max. (indoor 30m max.)

Voltage

100V AC (50/60Hz)

Operating frequency band

426MHz band (wireless equipment of low power security system)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Included functions

Infrared frequency changeover function (Ｌ↕Ｈ) AGC circuit, frost proof cover, Regular transmission function

Ambient temperature range

-10ºC to +50ºC

Mounting position

Outdoor, indoor

Weight

Phototransmitter: Approx. 620g Photoreceiver: Approx. 680g

Appearance

PC resin (wine red)

Grommet for embedded wiring

196

2-φ4 screw supported

Model No. Alert distance

■OPTIONAL ACCESSORIES

(Switch box applied)

67.2

■SPECIFICATIONS

●Pole <KP-100> (Galvanized)(2 in 1 set)

●Pole ●L-shape pole <KP-100B> (Black coating) <KP-48L> (Galvanized) (2 in 1 set) Height: 48cm (2 in 1 set) Height: 100cm

<KP-150> (Galvanized)(2 in 1 set)

<KP-150B> (Black coating) <KP-90L> (Galvanized) (2 in 1 set) Height: 90cm (2 in 1 set) Height: 100cm

●L-shape pole <KP-80LS> (Chromate coating) 1 80cm (H) x 15cm (D)

●L-shape pole <KP-80LL> (Chromate coating) 1 80cm (H) x 30cm (D)

●L-shape black pole <KP-30L> (Galvanized) (2 in 1 set) 25cm (H) x 35cm (D)

<KP-80LS> (B) (Black coating) 1 80cm (H) x 15cm (D)

<KP-80LL> (B) (Black coating) 1 80cm (H) x 15cm (D)

<KP-30L> (B) (Black coating) (2 in 1 set) 25cm (H) x 35cm (D)

Grommet 6.5 x 12 (Knockout for exposed wiring)

Reference diagram for mounting

■WIRING DIAGRAM (Note: A qualified electrical worker should be responsible for wiring to products of 100 V AC.)

■Terminal Arrangement

１

Power

Power 100V AC （50／60Hz）・２Ｗ

２ 100V AC

２

（50／60Hz）・２Ｗ

Phototransmitter

Photoreceiver

■Multi-unit connection

■Standard Connection Phototransmitter

Phototransmitter

Photoreceiver

Photoreceiver Photoreceiver Phototransmitter Phototransmitter

Frequency L

１２

Linear alert

Frequency H

Frequency L

１２１２

Photoreceiver

１２１２

１２

Receiver Receiver 100V AC

100V AC

WIRELESS SECURITY SYSTEM ■SOLAR POWER SUPPLY PHOTOELECTRIC SENSOR TRANSMITTER

TX-108

TX-108W

■DETECTION AREA DIAGRAM Beam diameterφ34mm 95mm 134mm

95mm

Outdoor 75m or less

■EXTERNAL DIMENSIONS (UNIT: mm)

(Mounted on φ42 pole)

Solar power supply photoelectric sensor transmitter TX-108 ●Detects the blocking of a photoelectric beam by an intruder, and transmits via radio wave to the corresponding receiver ●Both the phototransmitter and photoreceiver receive power from the solar power supply unit. ●Has a high power beam sensor with an outdoor alert distance of 75m and margin of sensitivity of 10 times. ●Equipped with the modulation frequency selection function to avoid mutual interference or wraparound. ●Notifies of lack of sensitivity in the indicator lightening if the reception level drops below a certain level. It is convenient to check the margin of sensitivity after placing the cover on. ●Strong against interference with long radio wave arrival distance of 100m ●The one-shot or repeat transmission mode can be selected using the transmission mode selection function. ●Monitors the radio wave arrival status using the regular transmission function. ●With the special hood attached on the sensor cover, this unit keeps alert without stopping the photoelectric beam even when the sensor is exposed to mist or frost. Mountable pole diameter φ38 to φ43

■SYSTEM CONFIGURATION DIAGRAM

■SPECIFICATIONS

Solar panel

Phototransmitter

Model No.

TX-108

Alert distance

Outdoor 75m

Power supply

Supplied from the solar power unit Infrared sensor: 6V DC Radio wave transmitter: 12V DC

Photoreceiver Photoelectric high power beam

Power supply unit

(Mounted on φ42 pole)

Low electric power wave ・Alarm ・Low battery ・Tamper

Low electric power wave ・Alarm ・Regular transmission Receiver ・Low battery ・Tamper

Power supply unit

Built-in battery

Control valve type lead battery

Operating frequency band (output)

426MHz band (10mW max.)

Radio wave arrival distance

Approx. 100m (line-of-sight distance)

Battery exhaustion function, Regular transmisAdditional functions sion function, Tamper function Mounting position Ambient temperature range

To the notification device

Weight

■OPTIONAL ACCESSORIES Appearance

●Solar power supply unit <BA-6SL> • Consists of the solar panel and power supply unit • Power supply output for sensor 6V DC/12mA • Control valve type lead battery built in • Tamper output equipped (Power supply unit)

●Solar panel

●Dedicated battery

<SB-75> (for BA-6SL)

<BA-75> (for BA-6SL)

Outdoor -10ºC to +50ºC Infrared sensor: Phototransmitter 1,200g, Photoreceiver 1,300g Power supply unit: Approx. 2,700g Solar panel: Approx. 9,000g Infrared sensor: PC resin (wine red) Power supply unit: ABS resin (black) Solar panel: Aluminum (silver)

●Pole center mount attachment ●Pole base for temporary setting

<BP-75> (for SB-75) <KP-1S> (for KP-100B/150B)

●Embedded box

●Pole side cover

<BU-50F>

<BS-50F>

●L-shape pole (Galvanized) <KP-48L> (for the TX-108 Series)

●L-shape pole (Galvanized) <KP-90L> (for the TX-108 Series)

●Pole <KP-100> (Galvanized) <KP-100B> (Black coating) (φ42.7mm×1m)

●Pole <KP-150> (Galvanized) <KP-150B> (Black coating) (φ42.7mm × 1.5m)

297.5

182

104

115

(Mounted on φ42 pole)

195.5

115

162 (Mounted on φ42 pole)

275

●For 2-step alert with a pair of photoelectric sensors and two solar power supply units ●Both the phototransmitter and photoreceiver receive power from the solar power supply unit. ●Has a high power beam sensor with a outdoor alert distance of 75m, margin of sensitivity of 100 times, and margin of distance of 10 times. ●Equipped with the modulation frequency selection function to avoid mutual interference or wraparound

■EXTERNAL DIMENSIONS (UNIT: mm)

390

Solar power supply photoelectric sensor transmitter TX-108W

Mountable pole diameter Φ38 to φ43

◎TX-108P10 (For 1 step alert) ◎TX-108P15 (For 1 step alert ) A set of the pole KP-100B with the low A set of the pole KP-150B with the low consumption photoelectric sensor and consumption photoelectric sensor and solar power supply unit attached solar power supply unit attached

◎TX-108WP15 (For 2 step alert) A set of the pole KP-150B with the low consumption photoelectric sensor and solar power supply unit attached

MODL NUMBER INDEX B BA-103 BA-105 BA-20A BA-50K BA-6SL BA-75 BCW-401 BH-101 BL-5000 BP-11 BP-12 BP-22 BP-75 BPH-101 BPR-113 BR-M5 BS-101K BS-50F BU-50F BW-14 BW-24

22 23 7 9 28 28 22･23･24･26 12 23 22 22 7･22 28 12 13 22 14 28 28 22 7･22

C CR17450E-R-2-CM2 13･17･23･24･26 CR17450E-R-CM1 16･21

D DC-0330-C DC-1115 DC-50K

22 13･14･17･23･24･26 9

16･17 17 25 26

G GS-03 GS-04

16 17

K KE-347T KP-100 KP-100B KP-150 KP-150B KP-1S KP-30L KP-30L(B)

16･17 27･28 27･28 27･28 27･28 28 27 27

27･28 27 27 27 27 27･28

L LR-6

23･24･26

R RTX-300 RX-10 RX-1000 RX-10A RX-2000 RX-200A-S RX-200B-S RX-30 RX-3000 RX-300A-S RX-30A RX-350 RX-360 RX-450-S RX-50K RX-710 RX-740 RXB-01

7･11 10 8 10 8 3 3 7 8 4 7 6 5 2 9 2 2 8

S SB-75

E EG-01 EG-1000 EXH-TK1 EXH-TKB1

KP-48L KP-80LL KP-80LL(B) KP-80LS KP-80LS(B) KP-90L

T TX-101A TX-101K TX-101P TX-102A TX-102BK TX-102GS TX-102MG TX-102S400 TX-102S600 TX-102S780 TX-102SK TX-103 TX-104B TX-104K TX-104P TX-105(W,L,R,S) TX-105(WL,LL,RL,SL)

12 14 12 13 13 16 14 15 15 15 14 22 18 18 18 23 23

TX-105TWL TX-106 TX-106WM TX-107 TX-108 TX-108W TX-108P10 TX-108P15 TX-108WP15 TX-109 TX-110 TX-111(B) TX-111C-S(BL) TX-111C-S(G) TX-111-S(BL) TX-111-S(G) TX-112 TX-113 TX-114 TX-114L TX-115(B) TX-115(G) TX-115(W) TX-115C(B) TX-115C(G) TX-115C(W) TX-115CL(B) TX-115CL(G) TX-115CL(W) TX-115L(B) TX-115L(G) TX-115L(W) TX-116 TX-116GS TX-116GSL TX-116L TX-117 TX-119LS400 TX-119LS600 TX-119LS780 TX-119S400 TX-119S600 TX-119S780 TX-121 TX-122 TX-123(W,N,S,PI) TX-123(WL,NL,SL,PIL) TYPE32-1

23 24 24 26 28 28･29 29 29 29 25 18 20 20 20 20 20 17 13 22 22 21 21 21 21 21 21 21 21 21 21 21 21 13 17 17 13 19 16 16 16 15 15 15 27 19 24 24 24

U U9VL

13･14･16

Precautions for use

・The radio wave arrival status is approximately 100m with a line-of-sight distance, which may be shortened depending on the building structure in the installation site and/or the surrounding environment. ・The sensor units may not operate normally in a strong electrical field or near devices that generate magnetism. ・The transmitter battery life varies depending on the battery type, transmission frequency, and/or environmental factors including ambient temperature. ・Remodeling these products is punishable by law.Doing so may also result in malfunction. Never disassemble and/or attempt to remodel. ・These products are not compatible with the conventional weak radio wave system. ・If more than one transmitter sends a signal simultaneously, they may not be properly received. Note that this is not a malfunction. ・When connecting a product to the phone line, be sure to use an automatic call unit of approved products compatible with the technical standards.

Safety Precautions

Please read the instruction manual carefully before using the security system device products for correct and safe usage.

Please Note : This sensor is designed to detect intrusion and to initiate an alarm; it is not a burglary-preventing device. TAKEX is not responsible for

damage, injury or losses caused by accident, theft, Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation or improper maintenance.

In Japan

In the U.S.

In Australia

Takenaka Engineering Co., Ltd. 83-1, Gojo-sotokan, Higashino, Yamashina-ku, Kyoto 607-8156, Japan Tel : 81-75-501-6651 Fax : 81-75-593-3816 http://www.takex-eng.co.jp/

Takex America Inc. 3350 Montgomery Drive, Santa Clara, CA 95054, U.S.A. Tel : 408-747-0100 Fax : 408-734-1100 http://www.takex.com

Takex America Inc. Unit 16/35 Garden Road, Clayton 3168 Victoria, Australia Tel : 03-9546-0533 Fax : 03-9547-9450

In the U.K. Takex America Inc. Brisbane office : 1/50 Logan Road,Woolloongabba Queensland 4102, Australia Tel : 07-3891-3344 Fax : 07-3891-3355

Takex Europe Ltd. Takex House, Aviary Court, Wade Road, Basingstoke, Hampshire, RG24 8PE, U.K. Tel :（+44）01256-475555 Fax :（+44）01256-466268 http://www.takexeurope.com LEAF 08-11X4-1