Security Sensors
UK PRODUCT LIST
ACTIVE INFRARED BEAMS For Use Stand-Alone OR In Beam Towers (But For Use In Beam Towers See Note* Below) Note* TA Series Beam Towers will accept all TAKEX Twin and Quad beam sets (listed following), but for preference use KH Series Beams (listed below TA Towers), designed specifically for use in TA Towers and supplied with PTKH ‘Quick-fix’ Mounting Bracket.
\\\ TWIN BEAMS 12/24VDC PB-30TK Up to 30m External / 60m Internal Twin Beam (Single Channel: Ch-3) use BP-60A Pole Clamp (if required) PB-60TK Up to 60m External / 120m Internal Twin Beam (Single Channel: Ch-3) use BP-60A Pole Clamp (if required) PB-100TK Up to 100m External / 200m Internal Twin Beam (Single Channel: Ch-3) use BP-60A Pole Clamp (if required) for ‘stacked’ or multiple in-line beam systems, use 4-Channel units to avoid ‘crosstalk’ PB-20TE Up to 20m External / 40m Internal Intelligent Twin Beam (4-Channel) use BP-60A Pole Clamp (if required) PB-40TE Up to 40m External / 80m Internal Intelligent Twin Beam (4-Channel) use BP-60A Pole Clamp (if required) PB-60TE Up to 60m External / 120m Internal Intelligent Twin Beam (4-Channel) use BP-60A Pole Clamp (if required)
\\\ QUAD BEAMS 12/24VDC PB-50F Up to 50m External / 100m Internal Quad Beam (Single Channel: Ch-3) includes Pole Clamps PB-100F Up to 100m External / 200m Internal Quad Beam (Single Channel: Ch-3) includes Pole Clamps PB-200F Up to 200m External / 400m Internal Quad Beam (Single Channel: Ch-3) includes Pole Clamps for ‘stacked’ or multiple in-line beam systems, use 4-channel units to avoid ‘crosstalk’ PB-IN-50HF Up to 50m External / 100m Internal Intelligent Quad Beam (4-Channel) includes Pole Clamps PB-IN-100HF Up to 100m External / 200m Internal Intelligent Quad Beam (4-Channel) includes Pole Clamps PB-IN-200HF Up to 200m External / 400m Internal Intelligent Quad Beam (4-Channel) includes Pole Clamps
\\\ ANTI-CRAWL BEAM 12/24VDC (Lower Beam Detects Crawling / Low Level Intrusion For High Security Applications) PB-IN-100AT
Up to 100m External / 200m Internal Intelligent Anti-Crawl Beam (4-Channel) includes Pole Clamps
\\\ BATTERY-POWERED/LOW CURRENT BEAM (For Wireless Systems, Batteries and Wireless Tx Not Supplied) PB-IN-75SW Up to 75m External / 150m Internal 6/12/24VDC Battery-Powered Beam (4-Channel) includes Pole Clamps A beam suitable for battery powered use for wireless applications, difficult-to-cable-to areas, or where there is no mains power. Use with a local sounder or any-make wireless transmitter or GSM dialler etc. (not supplied) for remote signalling to create temporary or permanent secure systems. Contact TAKEX for application and system design advice / battery options, duration etc.
\\\ ACCESSORIES FOR ACTIVE IR BEAMS BP-60A PBH BP-60TE BP-200F SS-COVER-TWIN SS-COVER-QUAD TWINCAGE QUADCAGE
Pole Clamps for TK/TE Beams - NOTE: Supplied Free-of-Charge If Ordered At The Same Time As The Beam Set Heaters (Thermistor Type, Per Pair) 12-24VDC 350mA (max) for Twin and Quad Beams - For Severe Weather Sites Optional Cover for TK/TE Twin Beams To Hide Rear of Mounting Pole (Per Pair) Optional Cover for all F and HF Quad, 100AT, and 75SW Beams To Hide Rear of Mounting Pole (Per Pair) Replacement Front Cover for all TK and TE Twin Beams Replacement Front Cover for all F and HF Quad, 100AT, and 75SW Beams Anti-Vandal Steel Cage for all TK and TE Twin Beams (Black or White - State Preference) Anti-Vandal Steel Cage for all F and HF Quad, 100AT, and 75SW Beams (Black or White - State Preference)
TA SERIES BEAM TOWERS (BEAM SETS NOT INCLUDED - USE KH SERIES BEAMS, LISTED BELOW) TA series Beam Towers will accept all TAKEX Twin and Quad Beam sets (listed above), but for preference use KH series Quad Beams (listed below), designed specifically for use in TA series Towers and supplied with PTKH ‘Quick-fix’ Mounting Bracket.
\\\ TAS SERIES SINGLE-SIDED FLOOR-MOUNT BEAM TOWERS (180° VIEW) 3m 2m 1.5m 1m
TAS100 TAS150 TAS200 TAS300
1m Single-Sided (180°) Floor-Mount Beam Tower 1.5m Single-Sided (180°) Floor-Mount Beam Tower 2m Single-Sided (180°) Floor-Mount Beam Tower 3m Single-Sided (180°) Floor-Mount Beam Tower
TAW100 TAW150 TAW200 TAW300
1m Single-Sided (180°) Wall-Mount Beam Tower 1.5m Single-Sided (180°) Wall-Mount Beam Tower 2m Single-Sided (180°) Wall-Mount Beam Tower 3m Single-Sided (180°) Wall-Mount Beam Tower
TAD100 TAD150 TAD200 TAD300
1m Double-Sided (360°) Floor-Mount Beam Tower 1.5m Double-Sided (360°) Floor-Mount Beam Tower 2m Double-Sided (360°) Floor-Mount Beam Tower 3m Double-Sided (360°) Floor-Mount Beam Tower
\\\ TAW SERIES SINGLE-SIDED WALL-MOUNT BEAM TOWERS (180° VIEW)
\\\ TAD SERIES DOUBLE-SIDED FLOOR-MOUNT BEAM TOWERS (360° VIEW)
\\\ ACCESSORIES FOR TA SERIES BEAM TOWERS TAPS Anti-Climb Switch for All TA Series Towers (Pressure-Sensitive) CRFB Mounting Base Root-Bolt-Set for TAS and TAD Towers (Optional: For Setting Into Wet Concrete) TA-PSU2A Optional: 12VDC 2A ‘In-Tower’ Power Supply - Requires 12V Standby Battery, Up To 7A (Not Supplied) Heaters with Thermostats are recommended for Beam-Tower sites where frost is anticipated PTH* Heater 12VDC 250mA For All TA Series Beam Towers (Requires PTS Thermostat) PTS** Thermostat For All TA Series Beam Towers (For Use With PTH Heaters) *One Heater required per Beam Unit Tx or Rx i.e. 2 Heaters per Beam Set **One Thermostat required per Tower
\\\ KH SERIES QUAD BEAMS For Use In TA Series Beam Towers (Includes PTKH ‘Quick-fix’ Mounting Bracket) PB50HF-KH PB100HF-KH PB200HF-KH PB100AT-KH
Up to 50m External / 100m Internal Quad Beam (4-Channel) - For Use In Beam Towers Only Up to 100m External / 200m Internal Quad Beam (4-Channel) - For Use In Beam Towers Only Up to 200m External / 400m Internal Quad Beam (4-Channel) - For Use In Beam Towers Only Up to 100m External / 200m Internal Anti-Crawl Beam (4-Channel) to detect crawling or low-level intrusion
TAKEX ARE PLEASED TO OFFER ASSISTANCE WITH PRODUCT SELECTION AND SYSTEM DESIGN
SPECIAL PURPOSE BEAMS / POINT-TO-POINT MICROWAVE \\\ MINIATURE BEAMS 12/24VDC PB-10NS PB-10TNS
Miniature Single IR Beam (1 x Tx, 1 x Rx), Remote Heads (10m cable), 10m Range (Tx to Rx) Inc. Control Unit Miniature Double IR Beam (2 x Tx, 2 x Rx, AND/OR Mode), (10m cable), 10m range (Tx to Rx) Inc. Control Unit
\\\ TWIN BEAM WITH BUILT-IN SOUNDER AND STROBE 12VDC
PBS-15T Up to 15m External / 30m Internal Beam c/w 90dB Sounder + High Intensity LED Strobe (Rx end), Alarm O/P Instant audible + visual warning for Security, Health & Safety, danger areas, or general warnings.
\\\ POINT-TO-POINT MICROWAVE
MW-50
For Harsh Environments / Practically Immune to Extreme Weather Conditions
50m External Point-to-Point (Tx/Rx) Microwave *H (High) or L (Low) Frequency Options Available. 12/24VDC
\\\ COMBINATION IR AND MICROWAVE SENSOR
COM-IN-50HF 50m External Point-to-Point (Tx/Rx) Microwave and Intelligent Quad Beam *H/L Options. 12/24VDC *To avoid crosstalk on sites with multiple in-line units, H and L channel options are available. Please seek advice from TAKEX.
REFLECTOR BEAMS \\\ INTERNAL REFLECTOR BEAMS 12VDC, 12/24VDC PR-1B PR-5B PR-10B
Non-Reflector Beam, Internal Use Only: No Reflector Required, Beam Reflects Off ‘Target’. Range Up To 1m. 12VDC Reflector Beam With Reflector, Internal Use Only. Range Up To 5m. 12/24VDC Reflector Beam With Reflector, Internal Use Only. Rotating Head, Range Up To 10m. 12VDC
\\\ EXTERNAL REFLECTOR BEAM 12/24VDC
PR-11B Reflector Beam With Reflector. Rotating Head, Range Up To 15m Internal / 11m External. 12/24VDC BL-11 ‘L’ Bracket for PR-11B Reflector (Optional) Reflector Beams require cable to the Transceiver end only, and are a convenient way to monitor entrances, gateways and drives where cabling to both ends is a problem. For general monitoring, lighting control etc.
EXTERNAL / SPECIALIST PIR \\\ EXTERNAL PET-TOLERANT PIRs 12/24VDC (For Security, Lighting Control, CCTV Presets...) MS-12TE MS-12FE OMS-12FE
Single Head, Wide Angle 90° x 12m, Day/Night Sensor, Timed O/P 2-300 secs Dual Head, 2 x Wide Angle 90° x 12m, (AND/OR Mode) Day/Night Sensor, Timed O/P 2-300 secs Fixed Head, Wide Angle 180° x 12m
\\\ BATTERY OPERATED EXTERNAL PET-TOLERANT PIRs (For Security, Lighting Control, CCTV Presets...) TX-114SR Battery Operated (PP3 9V) Pet-Tolerant PIR, External, Single Head, Wide Angle 90° x 12m TX-114SR will accommodate most small other-makes wireless transmitters (not supplied) TX-114TR Battery Operated (PP3 9V) Pet-Tolerant PIR, External, Single Head, Wide Angle 90° x 12m TX-114FR Battery Operated (PP3 9V) Pet-Tolerant PIR, External, Dual Head, 2 x Wide Angle 90° x 12m (AND/OR Mode) TX-114TR/FR has extended rear case to accommodate most makes wireless transmitters (not supplied)
\\\ MEDIUM RANGE PIR SENSORS 12/24VDC (For Security, Lighting Control, CCTV Presets...)
PA-15WE PA-30NE
External PIR, Omni-Directional Wall/Ceiling Mount Bracket, Wide Angle 15m x 15m External PIR, Omni-Directional Wall/Ceiling Mount Bracket, Long Range 30m x 3m
\\\ LONG RANGE PIR SENSORS 12/24VDC (For Security, CCTV Presets...) PIR-30WE PIR-50NE WO-2D BL-8400 BP-03
External PIR, Long Range Wide Angle 30m x 30m at 3.5m Mounting Height, Tilt/Tamper Switch External PIR, Long Range Narrow Angle 50m x 3m at 3.5m Mounting Height, Tilt/Tamper Switch Wall Mount Bracket (CCTV Type) for PIR-30WE/50NE, Requires BL-8400 Rear Adaptor Rear Adaptor (Required For Use With WO-2D Wall Mount Bracket) Pole Mount Clamp For PIR-30WE/50NE (To Attach To Lighting Columns, Poles etc.)
\\\ MULTI-PATTERN PIR SENSOR 12/24VDC (For Security, Lighting Control, CCTV Presets...) MS-100E
Multi-Pattern External PIR (Supplied With Lenses For 10m Wide Angle, 10m Vertical/Horizontal Curtain, 20m x 2m Long Range) Day/Night Sensor, Timed Output 2 Seconds to approx. 5 Minutes A multi-purpose, multi-use external PIR: includes various detection pattern lenses, Day/Night Sensor, Timed Output Relay (2 sec - 5min)
\\\ REQUEST-TO-EXIT SENSOR 12/24VAC/DC PS-520E Request-to-Exit Door Sensor (can be wired Fail-Locked or Fail-Open) 12/24VAC/DC Use as an alternative to ‘Request-to-Exit’ buttons for hands-free convenience when exiting
SPEECH WARNING DEVICES Built-In Microphone, Record Any Message Up To 8 Seconds Long) \\\ HORN SPEAKER TYPE 12VDC PV-12 Horn Speaker Activated by Built-In 12m x 12m PIR, External, 100dB (Adjustable), Alarm Output Contacts AV-100 As PV-12 But Without PIR: Requires External Alarm Trigger Input From Another Device (N/O Contact) Record any message (up to 8 seconds), Real Voice Output: Maximum impact for Security, Health & Safety, Advisory Warnings... Stand-alone use or compatible with all CCTV, Access Control, Intruder Systems.
\\\ PIR SENSOR SPEAKER 12/24VDC PVW-12TE
Pet-Tolerant PIR, External, Single Head, Wide Angle 90° x 12m, Day/Night Sensor, 2 x Message Speech Unit (For Day, Night, Or Selectable) 80dB (Adjustable) Record any 2 messages (each up to 8 seconds), Real Voice Output for Security, Health & Safety, Advisory Warnings... Arm/Disarm or Message Selection by Built-in Photocell (Day/Night) or External Inputs.
TAKEX ARE PLEASED TO OFFER ASSISTANCE WITH PRODUCT SELECTION AND SYSTEM DESIGN
Reliable Perimeter Intrusion
Detection (PIDs) is an art, and we consider ourselves masters TA Series Beam Towers • TAS (single-sided), TAD (double-sided) and TAW (wall mount) versions available • available in 1m, 1.5m, 2m or 3m heights • anodised aluminium column for high resistance to oxidation • tamper protected to prevent unauthorised interference • vandal resistant polycarbonate covers conceals number and position of beams from would-be intruders
KH Series Quad Beams • PB-50HF-KH (50m), PB-100HF-KH (100m) and PB-200HF-KH (200m) models available • 4 x synchronised high power double modulated beams • selectable 4-channel beam frequencies allows stacking without crosstalk • double coated electronics for demanding environments • environmental monitoring circuit
From Active Infra-Red Beams and Beam Tower systems capable of monitoring the smallest of areas to the largest of commercial and industrial sites, via hardwired or wireless external pet-tolerant PIRs and Speech Warning devices for security, health and safety or advisory messages, TAKEX equipment is used by professional security installers worldwide.
TAKEX are pleased to offer assistance with product selection and system design. tel: 01256 475555 | email: sales@takex.com | web: www.takex.com TAKEX Europe, Ltd. | Aviary Court, Wade Road Basingstoke, Hampshire, RG24 8PE, UK
ACTIVE IR BEAMS
EXTERNAL PIR
PET-TOLERANT PIR
SPEAKER SENSORS
MINI BEAMS
REFLECTOR BEAMS
The ultimate in trouble-free perimeter detection up to 200m outdoor / 400m indoor.
High performance mirror optics external PIR. 30m Wide angle or 50m x 3m long range narrow angle
Up to 12m external range at 90º or 180º detection area hardwired or wireless versions available.
Record any voice or sound message for warning/security, health and safety, advisory or greeting applications.
Miniature beams for discreet detection across doorways, windows, prestige/covert applications.
A convenient way to monitor entrances /driveways etc. where cabling to both ends is impractical.