C
M
Y
CM
MY
CY
CMY
K
SECURITY SENSORS TAKEX is a leading Japanese manufacturer of Security Sensors, specialising in Active Infrared Beams for Perimeter Protection, and Outdoor PIR for CCTV activation and Intruder Detection. With more than 50 years of engineering experience, we are proud to be specified at the highest level of Royal, Government and Military organisations worldwide.
PHOTOELECTRIC BEAMS MICROWAVE SENSORS PASSIVE INFRARED SENSORS FLAME SENSORS AUTO DOOR SENSORS SPEECH WARNING DEVICES
PHOTOELECTRIC BEAM SENSORS Photoelectric Beam Sensors Photoelectric Beam Sensors for Tower Enclosures Miniature Photoelectric Beam Sensors Explosion-Proof Photoelectric Beam Sensor Shutter Sensors Solar Powered Beam Sensor Systems Beam Tower Enclosures
1-5 3 6-7 7 7 8 24
MICROWAVE SENSORS Microwave Sensors Combination Sensors
9 9
PASSIVE INFRARED SENSORS Passive Infrared Sensors (for Outdoor Use) Passive Infrared Sensors Anti-Masking Base Unit
10 - 11 12 - 15 15
FLAME SENSORS Flame Sensors C
M
Y
CM
MY
CY
CMY
K
16 - 17
AUTO DOOR SENSORS Auto Door Sensors (Photoelectric Beam) Auto Door Sensor (passive Infrared)
18 - 19 19
SPEECH WARNING DEVICES Speech Warning Devices Voice Speaker
20 21
OTHER SENSORS Glass Sensors Sensor Switch
17 21
ACCESSORIES For Photoelectric Beam Sensors For Shutter Sensors For Outdoor Passive Infrared Sensors For Passive Infrared Sensors
22 22 23 23
n INDEX
25
www.takex.com
PHOTOELECTRIC BEAM SENSORS PXB-50HF (Quad Beam, Outdoor 50m) PXB-100HF (Quad Beam, Outdoor 100m) PXB-200HF (Quad Beam, Outdoor 200m)
Detection System Alarm Output Power Supply
Current Consumption
• Intelligent quad beam • 50,000 lux light immunity • 4 frequencies selectable • Target color • Lightning protection
PB-IN-50HF (Quad Beam, Outdoor 50m) PB-IN-100HF (Quad Beam, Outdoor 100m) PB-IN-200HF (Quad Beam, Outdoor 200m)
C
M
• Intelligent quad beam • 50,000 lux light immunity • 4 frequencies selectable • Target color
Y
CM
MY
PXB-50F (Quad Beam, Outdoor 50m) PXB-100F (Quad Beam, Outdoor 100m) PXB-200F (Quad Beam, Outdoor 200m)
CY
CMY
K
Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption) Dry contact relay output form C Contact action: Interruption time (Min.2sec.) Contact capacity: 30V (AC/DC) 1A (resistive load) Protective resistor 12 to 30V DC (Non-polarity)
30mA to 34mA • Double modulation beam • Wide beam Features • Upper/lower beam switch • Response time adjustment Ambient Temperature −31°F to +151°F (−35°C to +66°C) Optional
External Dimensions IP Rating Weight
Pole, Heater, Pole-side cover
W114mm × H450mm × D100mm
65
Transmitter: 1,500g Receiver: 1,550g Near infrared pulsed beam interruption system Detection System (TR-RE 4 beam simultaneous interruption) Dry contact relay output: 1c Alarm Output Reset time: Interruption time (Min. 2sec) 30V (AC/DC) 1A Max Supply Voltage 12 to 30V DC (non-polarity) Power Consumption 95mA to 120mA • Double modulation beam • Beam power selection Features • Auto-gain lock • Frost proof cover Ambient Temperature −31°F to +151°F (−35°C to +66°C) Pole, poleattachment, pole-side Optional cover, heater, flush mount housing External Dimensions W104mm × H390mm × D98mm IP Rating Weight
55
Power Supply
Transmitter 1,200g Receiver 1,300g Near infrared pulsed beam interruption (TR-RE 4 beam simultaneous interruption) Dry contact relay output form C Contact action: Interruption time (Min.2 sec.) Contact capacity: 30V (AC/DC) 1A (resistive load) Protective resistor 12 to 30V DC (Non-polarity)
Optional
Pole, Heater, Pole-side cover
IP Rating
65
Detection System Alarm Output
Current Consumption 30mA to 34mA • Double modulation beam • Wide beam Features • Upper/lower beam switch • Response time adjustment Ambient Temperature −31°F to +151°F (−35°C to +66°C) • Intelligent quad beam • 50,000 lux light immunity • Target color • Lightning protection
PB-50F (Quad Beam, Outdoor 50m) PB-100F (Quad Beam, Outdoor 100m) PB-200F (Quad Beam, Outdoor 200m)
External Dimensions W114mm × H450mm × D100mm Weight
Transmitter 1,500g Receiver 1,550g Near infrared pulsed beam interruption system Detection System (TR-RE 4 beam simultaneous interruption) Dry contact relay output N.O./N.C. selectable Alarm Output Reset time: Interruption time (Min. 2sec) 30V (AC/DC) 1A Max Supply Voltage 12 to 30V DC (non-polarity) Power Consumption 95mA to 120mA Features
• Double modulation beam • Frost proof cover
Ambient Temperature −31°F to +151°F (−35°C to +66°C) Optional • Quad beam • 50,000 lux light immunity • Target color
www.takex.com
Pole, poleattachment, pole-side cover, heater, flush mount housing
External Dimensions W104mm × H390mm × D98mm IP Rating
55
Weight
Transmitter 1,200g Receiver 1,300g
01
PHOTOELECTRIC BEAM SENSORS Detection System
• Battery operated • 4 frequencies selectable • 4 detection distances selectable • Target color • Lightning Protection
Optional
Pole, Pole cover
IP Rating
65
(Coverage: Outdoor 100m or less)
PXB-100ATC (Quad Beam) (Coverage: Outdoor 100m)
C
• For anti crawl • 50,000 lux light immunity • 4 frequencies selectable • Synchronized high power beam • Lightning protection • Target color
M
Y
CM
MY
PB-IN-100AT (Quad Beam)
CY
Near infrared pulsed beam interruption (TR-RE 4 beam simultaneous interruption) Protection Distance 4 Distances Selectable (25/50/75/100m) Dry contact relay output form C Alarm Output Contact capacity: DC 30V 0.1A (resistive load) Power Supply 3.6V DC (SAFT LS33600 recommended) • Single modulation beam • Wide beam • Upper/lower beam switch Features • Battery saving • Repeat output • Battery sharing Ambient Temperature −13°F to +140°F (−25°C to +60°C)
TXF-125E (Quad Beam)
(Coverage: Outdoor 100m)
CMY
K
• For anti crawl • 50,000 lux light immunity • 4 frequencies selectable
External Dimensions W114mm × H450mm × D135mm Weight (Batteries excluded) Transmitter 1,500g Receiver 1,550g Near infrared pulsed beam interruption Detection System system (Anti-crawling, Anti-corrosion) Dry contact relay output N.O./N.C. selectable Contact action: Interruption time (Min.2sec.) Alarm Output Contact capacity: 30V (AC/DC) 1A (resistive load) Protective resistor Power Supply 12 to 30V DC (Non-polarity)
Current Consumption Transmitter: 27mA Receiver: 48mA • Double modulation beam • Wide beam Features • Upper/lower beam switch • Response time adjustment Ambient Temperature −31°F to +151°F (−35°C to +66°C) Optional
Pole, Heater, Pole-side cover
IP Rating
65
Weight
Transmitter: 1,400g Receiver: 1,500g
External Dimensions W114mm × H450mm × D100mm
Near infrared pulsed beam interruption system (Anti-crawling) Dry contact relay output: 1c Reset time: Detection time + delay Alarm Output time (approx. 1.5sec) 30V (AC/DC) 1A Max Supply Voltage 12 to 30V DC (non-polarity) Detection System
Power Consumption 85mA • Double modulation beam Features • Auto-gain lock • Dual response time system Ambient Temperature −13°F to +140°F (−25°C to +60°C) Pole, poleattachment, pole-side Optional cover, heater, housing External Dimensions W104mm × H390mm × D98mm IP Rating Weight
PB-100ST (Twin Beam)
(Coverage: Outdoor 100m)
55
Transmitter 1,200g Receiver 1,300g Near infrared pulsed beam Detection System interruption system (TR-RE 2 beam simultaneous interruption) Dry contact relay output: 1c Reset time: Detection time + delay Alarm Output time (approx. 1sec) 30V (AC/DC) 0.5A Max Supply Voltage 10 to 30V DC (non-polarity) Power Consumption 80mA or less Ambient Temperature −13°F to +140°F (−25°C to +60°C)
• 50,000 lux light immunity • Automatic Gain Control • Frost and dew proof cover
Optional
Pole, poleattachment, pole-side cover, heater, housing
External Dimensions W104mm × H390mm × D98mm IP Rating
55
Weight
Transmitter/Receiver 1,200g each
: Wireless ready version
02
www.takex.com
PHOTOELECTRIC BEAM SENSORS FOR TOWER ENCLOSURES PXB-50HF-KH (Quad Beam, Outdoor 50m) PXB-100HF-KH (Quad Beam, Outdoor 100m) PXB-200HF-KH (Quad Beam, Outdoor 200m)
Detection System Alarm Output Power Supply
Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption) Dry contact relay output form C Contact action: Interruption time (Min.2sec.) Contact capacity: 30V (AC/DC) 1A (resistive load) Protective resistor
12 to 30V DC (Non-polarity)
Current Consumption 30mA to 34mA Features * Beam Tower version of PXB-50HF/100HF/200HF
PB-50HF-KH (Quad Beam, Outdoor 50m) PB-100HF-KH (Quad Beam, Outdoor 100m) PB-200HF-KH (Quad Beam, Outdoor 200m)
• Double modulation beam • Wide beam • Upper/lower beam switch • Response time adjustment
Ambient Temperature −31°F to +151°F (−35°C to +66°C)
Near infrared pulsed beam Detection System interruption system (TR-RE 4 beam simultaneous interruption) Dry contact relay output: 1c Alarm Output Reset time: Interruption time (Min. 2sec) 30V (AC/DC) 1A Max Supply Voltage 12 to 30V DC (non-polarity) Power Consumption 60mA to 85mA Features
C
* Beam Tower version of PB-IN-50HF/100HF/ 200HF
Ambient Temperature −31°F to +151°F (−35°C to +66°C)
PXB-100ATC-KH (Quad Beam)
Detection System
(Coverage: Outdoor 100m)
M
• Double modulation beam • Beam power selection • Auto-gain lock • Frost proof cover
Alarm Output
Y
CM
Near infrared pulsed beam interruption system (Anti-crawling, Anti-corrosion) Dry contact relay output N.O./N.C. selectable Contact action: Interruption time (Min.2sec.) Contact capacity: 30V (AC/DC) 1A (resistive load) Protective resistor
MY
Power Supply
CY
Current Consumption Transmitter: 27mA
CMY
Features
K
12 to 30V DC (Non-polarity) Receiver: 48mA
• Double modulation beam • Wide beam • Upper/lower beam switch • Response time adjustment
* Beam Tower version of PXB-100ATC
Ambient Temperature −31°F to +151°F (−35°C to +66°C)
PB-100AT-KH (Quad Beam) (Coverage: Outdoor 100m)
Detection System
Near infrared pulsed beam interruption system (Anti-crawling)
Alarm Output
Dry contact relay output: 1c Reset time: Detection time + delay time (approx. 1.5sec) 30V (AC/DC) 1A Max
Supply Voltage 12 to 30V DC (non-polarity) Power Consumption 85mA Features
• Double modulation frequency • Auto-gain lock • Dual response time system
* Beam Tower version of PB-IN-100AT
Ambient Temperature −13°F to +140°F (−25°C to +60°C)
TXF-125E-KH (Quad Beam)
Detection System
(Coverage: Outdoor 100m or less)
Protection Distance 4 Distances Selectable (25/50/75/100m) Alarm Output Power Supply
Features
* Beam Tower version of TXF-125E
Near infrared pulsed beam interruption (TR-RE 4 beam simultaneous interruption)
Dry contact relay output form C Contact capacity: DC 30V 0.1A (resistive load)
3.6V DC (SAFT LS33600 recommended)
• Single modulation beam • Upper/lower beam switch • Wide beam • Battery saving • Repeat output • Battery sharing
Ambient Temperature −13°F to +140°F (−25°C to +60°C)
: Wireless ready version
www.takex.com
03
PHOTOELECTRIC BEAM SENSORS PB-20TE (Twin Beam)
(Coverage: Outdoor 20m / Indoor 40m)
PB-40TE (Twin Beam)
(Coverage: Outdoor 40m / Indoor 80m)
PB-60TE (Twin Beam)
(Coverage: Outdoor 60m / Indoor 120m)
Detection System Near infrared (through type) Dry contact relay output: 1c Alarm Output Reset time: Detection time + delay time (approx. 1 ~ 3sec) 30V (AC/DC) 0.5 A Max Supply Voltage 10 to 30V DC (non-polarity) Power Consumption 55mA to 80mA • Double modulation beam • Frost proof cover Features • AGC circuit • Monitor jack output Ambient Temperature −13°F to +140°F (−25°C to +60°C) Mounting Position Outdoor, indoor Optional
Pole, Pole cover, housing
IP Rating
54
• Intelligent twin beam • 50,000 lux light immunity • 4 frequencies selectable • Target color
External Dimensions W73mm × H170mm × D71.5mm
PB-30TK(K) (Twin Beam)
Detection System Near infrared (through type) Dry contact relay output: 1c Reset time: Detection time + delay Alarm Output time (approx. 1 ~ 3sec) 30V (AC/DC) 0.5A Max Supply Voltage 10 to 30V DC (non-polarity)
(Coverage: Outdoor 30m / Indoor 60m)
PB-60TK(K) (Twin Beam)
(Coverage: Outdoor 60m / Indoor 120m)
PB-100TK(K) (Twin Beam)
(Coverage: Outdoor 100m / Indoor 200m)
C
Weight
Transmitter: 380g Receiver: 400g
Power Consumption 53mA to 80mA • Double modulation beam • Frost proof cover Features • AGC circuit • Monitor jack output Ambient Temperature −13°F to +140°F (−25°C to +60°C) Mounting Position Outdoor, indoor
M
Y
• Twin beam • 50,000 lux light immunity
CM
Optional
Pole, Pole cover, housing
IP Rating
54
External Dimensions W73mm × H170mm × D71.5mm
MY
Weight
CY
Detection System Near infrared (through type)
PB-30SU
(Flush mount type) (Coverage: Indoor 30m)
CMY
K
Alarm Output
Transmitter: 380g Receiver: 400g
Dry contact relay output: N/C or N/O Reset time: Detection time + delay time (approx. 2sec) 24V (AC/DC) 0.25A Max
Supply Voltage 10 to 30V DC (non-polarity) Power Consumption 31mA Ambient Temperature −4°F to +122°F (−20°C to +50°C) • Unassuming design • Selectable beam power • AGC circuit
Mounting Position Indoor External Dimensions W70mm × H120mm × D45mm Weight
90g
PH-200SE
Detection System Near infrared (through type)
PH-600SE
Alarm Output
(Coverage: Outdoor 200m) (Coverage: Outdoor 600m)
Dry contact relay output: N/C Reset time: Detection time + delay time (approx. 2sec) 30V (AC/DC) 0.5A Max
Supply Voltage 10.5 to 30V DC (non-polarity) Power Consumption 45mA Ambient Temperature −13°F to +131°F (−25°C to +55°C) Mounting Position Outdoor, indoor • External environmental diagnostic function
04
Optional
SEC Circuit board, pole, long hood
External Dimensions
W124mm × H170mm × D240mm (PH-200SE)
Weight
2,000g (200SE) · 8,000g (600SE)
www.takex.com
PHOTOELECTRIC BEAM SENSORS PR-1B
Detection System Near infrared (direct reflection type)
(Coverage: 1m) Alarm Output
Dry contact relay output: 1c Reset time: Detection time + delay time (approx. 0.5sec) 30V (AC/DC) 0.5A Max
Supply Voltage 10.5 to 22V DC (non-polarity) Power Consumption 60mA • Motionless objects can be detected • Direct reflection system (no reflector reguired) • Sensitivity abjustment • Slim and compact size • Flush mount is available with optional attachment
Ambient Temperature −4°F to +122°F (−20°C to +50°C) Mounting Position Indoor Optional
External Dimensions W62mm × H106mm × D23.5mm Weight
PR-5B
Flush mount plate, L bracket
75g
Detection System Near infrared (reflection type)
(Coverage: 5m) Alarm Output
Dry contact relay output: 1c Reset time: Detection time + delay time (approx. 1sec) 30V (AC/DC) 0.5A Max
Supply Voltage 10.5 to 26V DC (non-polarity) Power Consumption 37mA • Single beam of indoor use for short distance • Reflection type
C
M
Ambient Temperature −4°F to +122°F (−20°C to +50°C) Mounting Position Indoor Optional
Y
Flush mount plate, L bracket
External Dimensions W62mm × H106mm × D23.5mm
CM
Weight
MY
CY
Detection System Near infrared (reflection type)
PR-10BU
Alarm Output
(Flush mount type) (Coverage: 10m)
K
Reflector 50g
PR-10B
(Surface mount type)
CMY
Sensor 90g
Dry contact relay output: N/C Reset time: approx. 1sec 30V (AC/DC) 0.5A Max
Supply Voltage 10.5 to 15V DC (non-polarity) Power Consumption 30mA Ambient Temperature −4°F to +122°F (−20°C to +50°C) Mounting Position Indoor Optional • Single beam of indoor use for short distance • Reflection type
PR-11BE
L bracket
External Dimensions W62mm × H157mm × D62mm Weight
Sensor 220g Reflector 90g (PR-10B)
Detection System Near infrared (reflection type)
(Coverage: outdoor 11m, indoor 15m) Alarm Output
Dry contact relay output: N/O or N/C selectable 30V (AC/DC) 0.5A Max
Supply Voltage 10.5 to 30V DC (non-polarity) Power Consumption 55mA Features * Protection distance (between sensor/reflector) should be placed in the rated range
www.takex.com
• Tamper output • Monitor jack output
Ambient Temperature −13°F to +140°F (−25°C to +60°C) Mounting Position Outdoor / Indoor External Dimensions
Sensor W73mm × H170mm × D71.5mm Reflector W93mm × H231.5mm × D100mm
Weight
Sensor 430g
Reflector 490g
05
5
MINIATURE PHOTOELECTRIC BEAM SENSORS <Amplifier separate type> PB-10NS
Detection System Near infrared (through type)
Single beam (Coverage: 10m) Alarm Output
Dry contact relay output: N/O or N/C selectable Reset time: Detection time + delay time (approx. 1sec.) 30V (AC/DC) 0.3A Max
Supply Voltage 10 to 30V DC (non-polarity) • Sensitivity adjustment (Set the sensitivity adjustment volume depending on the protection distance.)
PB-10TNS
Power Consumption 45mA or less Ambient Temperature −13°F to +131°F (−25°C to +55°C) Mounting Position Indoor or semi-outdoor External Dimensions
Sensor 15mm dia × 16mm Amplifier W45mm × H120mm × D29mm
Weight
Sensor 120g
Amplifier 95g
Detection System Near infrared (through type)
Twin beam (Coverage: 10m) Alarm Output
Dry contact relay output: N/O or N/C selectable Reset time: Detection time + delay time (approx. 1sec.) 30V (AC/DC) 0.3A Max
Supply Voltage 10 to 30V DC (non-polarity) • Sensitivity adjustment (Set the sensitivity adjustment volume depending on the protection distance.)
C
M
Y
Power Consumption 55mA or less Ambient Temperature −13°F to +131°F (−25°C to +55°C) Mounting Position Indoor or semi-outdoor External Dimensions
Sensor 15mm dia × 16mm Amplifier W45mm × H120mm × D29mm
Weight
Sensor 120g
CM
MY
PB-4RNS
CY
Detection System Near infrared (reflection type)
Single beam reflective (Coverage: 4m)
CMY
Alarm Output
K
Amplifier 95g
Dry contact relay output: N/O or N/C selectable Reset time: Detection time + delay time (approx. 1sec.) 30V (AC/DC) 0.3A Max
Supply Voltage 10 to 30V DC (non-polarity) Power Consumption 45mA or less • Sensitivity adjustment (Set the sensitivity adjustment volume depending on nonsensitive zones.)
Ambient Temperature −13°F to +131°F (−25°C to +55°C) Mounting Position Indoor or semi-outdoor Sensor 15mm dia × 16mm External Dimensions Amplifier W45mm × H120mm × D29mm Reflector W69mm × H84mm × D13mm Weight
PB-4RTNS
Sensor 120g
Amplifier 95g
Detection System Near infrared (reflection type)
Twin beam reflective (Coverage: 4m) Alarm Output
Dry contact relay output: N/O or N/C selectable Reset time: Detection time + delay time (approx. 1sec.) 30V (AC/DC) 0.3A Max
Supply Voltage 10 to 30V DC (non-polarity) Power Consumption 55mA or less • Sensitivity adjustment (Set the sensitivity adjustment volume depending on nonsensitive zones.)
Ambient Temperature −13°F to +131°F (−25°C to +55°C) Mounting Position Indoor or semi-outdoor Sensor 15mm dia × 16mm External Dimensions Amplifier W45mm × H120mm × D29mm Reflector W69mm × H84mm × D13mm Weight
06
Sensor 120g
Amplifier 95g
www.takex.com
MINIATURE PHOTOELECTRIC BEAM SENSOR <Amplifier separate type> DS-6ND
Single beam (Coverage: 6m)
Detection System Near infrared (through type) Alarm Output
Dry contact relay output: N/O Reset time: Detection time + delay time (approx. 1sec.) 30V (AC/DC) 0.3A Max
Supply Voltage 10 to 30V DC (non-polarity) Power Consumption 50mA or less • Sensitivity adjustment (Set the sensitivity adjustment control depending on the protection distance.)
Ambient Temperature −13°F to +131°F (−25°C to +55°C) Mounting Position Indoor or semi-outdoor External Dimensions Weight
Sensor 15mm dia × 16mm Amplifier W45mm × H94mm × D29mm Sensor 100g
Amplifier 70g
EXPLOSION-PROOF PHOTOELECTRIC BEAM SENSOR PB-100EX
(Coverage: Outdoor 100m)
PB-200EX
(Coverage: Outdoor 200m)
PB-400EX
(Coverage: Outdoor 400m) • Ideal for monitoring hazardous locations.
C
M
CM
MY
CMY
Applicable Gases Labor Ministry Approval No. Alarm Output Supply Voltage Power Consumption Ambient Temperature External Dimensions
Y
CY
Detection System Explosion-proof Construction Applicable Locations
Weight
Near infrared (through type) Intrinsically safe explosion proofing + pressure resistant explosion proof construction Class 1 and 2 hazardous locations 2G4 (Explosion class: 2) (Ignition class: G4) Transmitter: No.T62011 Receiver: No.T62010 Dry contact relay output: N/C Reset time: Detection time + deray time (approx 1 sec) 220V (AC/DC) 0.5A or 10VA Max 100V AC 50/60Hz or 200V AC 50/60Hz 5.5VA +14°F to +104°F (−10°C to +40°C) W198mm × H258mm × D350mm 20,000g ~ 25,000g
SHUTTER SENSORS
K
PR-S3
(Distance: 5 to 40cm)
Detection System Near infrared (reflection type) Alarm Output
Dry contact relay output: 1c Response time: 1 to 2sec 30V (AC/DC) 0.5A Max
Supply Voltage 10 to 30V DC (non-polarity) Power Consumption 35mA Features
LED lights up
Ambient Temperature −4°F to +122°F (−20°C to +50°C) Mounting Position Shutter case, lintel (indoor) • Double beam • Built-in operation LED output point • Built-in attenuation LED
SH-M5
(Distance: 3 to 12cm)
Optional
Sensor bracket, sheet bracket
External Dimensions W94mm × H50mm × D40mm Weight
115g
Detection System Magnetic modulation Alarm Output
Dry contact relay output: 1c Response time: 1 to 2sec 30V (DC) 0.5A Max
Supply Voltage 10 to 30V (non-polarity) Power Consumption 38mA Ambient Temperature −4°F to +122°F (−20°C to +50°C) Mounting Position Shutter (indoor) Optional
Sensor bracket, sheet bracket
External Dimensions W92mm × H43mm × D36mm Weight
www.takex.com
95g
07
SOLAR POWERED BEAM SENSOR SYSTEMS
TAKEX new system saves a lot of installation work. This system consists of PXB-100SW/PB-IN-75SW : Beam sensor & BA-6SLA : Solar panel + power unit With this system, no wiring will be required for transmitter. And only signal wiring will be required for receiver.
PXB-100SW
(Quad Beam) (Coverage: Outdoor 100m)
C
• Intelligent quad beam • Low current consumption • Double modulation beam • 4 frequencies selectable • Target color • Lightning Protection
M
Y
CM
MY
PB-IN-75SW (Quad Beam) (Coverage: Outdoor 75m)
CY
CMY
K
• Extreamly low current consumption • 4 frequencies selectable • Double modulation beam • Automatic gain lock
Near infrared pulsed beam interruption (TR-RE 4 beam simultaneous interruption) Dry contact relay output N.O./N.C. selectable Contact action: Interruption time (Min.2 sec.) Alarm Output Contact capacity: 30V(AC/DC) 1A (resistive load) Protective resistor Power Supply 5 to 30V DC (with polarity) 5V to 8V DC: 6mA (TR 3.7/RE 2.3mA) or less when armed Power Cponsumption 10V to 30V DC: 8.3mA (TR 5.2/RE 3.1mA) or less when armed Ambient Temperature −31°F to +151°F (−35°C to +66°C) Detection System
External Dimensions W114mm × H450mm × D100mm
IP Rating
External Dimensions W104mm × H390mm × D98mm
IP Rating
55
Power output
3V DC 50mA or less for Wireless transmitter 6V DC 12mA or less for Beam sensor
Weight
BA-6SLA
(Solar Battery Kit)
* This kit consists of ; 1 Solar panel unit and 1 Power unit. (Battery is not included)
65
Weight (Batteries excluded) Transmitter 1,500g / Receiver 1,550g Near infrared pulsed beam interruption Detection System (TR-RE 4 beam simultaneous interruption) Dry contact relay form C Reset time: Detection time + delay Alarm Output time (approx. 2secs) 30V (AC/DC) 1A Power Supply 5 to 8V DC or 10 to 30V DC (with polarity) 5 to 8V DC: 6mA (TR. side 3.7mA) or less when armed Power Consumption 10 to 30V DC: 25mA (TR. side 15mA) or less when armed Ambient Temperature −13°F to +140°F (−25°C to +60°C)
Transmitter 1,200g / Receiver 1,300g
Capacity: 6V DC 7.2 Ah Battery Size: L 149mm - 153mm W 32mm - 36mm (not included) H 92mm - 96mm Voltage: Max 8.4V (when Sunlight Solar Panel Output 1kW/m2) Current: MAX 0.18A (ditto)
Ambient Temparature +14°F to +122°F (−10°C to +50°C)
08
IP Rating
43
Weight
Power Unit: 1,300g Solar panel: 600g (wire excluded)
www.takex.com
MICROWAVE SENSORS MW-50L/H
(Coverage: Outdoor 50m)
Model
Alarm Output
Dry contact relay output 1C 30V (AC/DC) 0.5A or less
Supply Voltage
12 to 30V DC 100mA
Features
Monitor output Adjustment mode switch Automatic Gain Control circuit
Optional
Pole cover (BP-50MW)
• 2 frequencies (H) and (L) available. • Automatic Gain Control circuit. • Adjustment mode switch available.
External Dimensions
W112mm × H232mm × D102mm
Weight
Transmitter 710g Receiver 760g
MW-100AL/AH
Model
(Coverage: Outdoor 100m)
C
MW-100AL
MW-100AH
Detection System Microwave 24.11GHz Microwave 24.17GHz Alarm Output
Dry contact relay output 1C 30V (AC/DC) 0.5A or less
Supply Voltage
12 to 30V DC
Power Consumption
Y
MW-50H
Detection System Microwave 24.11GHz Microwave 24.17GHz
Power Consumption
M
MW-50L
100mA
Features
Monitor output Adjustment mode switch Automatic Gain Control circuit
Optional
Pole cover (BP-100MW)
• 2 frequencies (H) and (L) available. • Automatic Gain Control circuit. • Adjustment mode switch available.
External Dimensions
W130mm × H307mm × D126mm
Weight
Transmitter 930g Receiver 980g
COM-IN-50HFL/HFH
Detection System Photoelectric beam + Microwave Dry contact relay output 1C Reset time: Detection time + delay Alarm Output time (approx. 2sec.) 30V (AC/DC) 1A Max Supply Voltage 12 to 30V DC
CM
MY
CY
COMBINATION SENSORS
CMY
(Coverage: Outdoor 50m)
K
• Combination of photoelectric beam and microwave • And-gated or Or-gated available • 4 frequencies selectable • Environmental module
COM-IN-100AL/AH
(Coverage: Outdoor 100m)
• Combination of photoelectric beam and microwave • And-gated or Or-gated available • 4 frequencies selectable • Environmental module
www.takex.com
Power Consumption 165mA Alarm Output: And-gated or Or-gated available Environmental Output Features 4 frequencies selectable Automatic gain control (AGC) circuit Monitor jack Optional Pole cover (BP-50COM) External Dimensions W104mm × H627mm × D102mm Weight
Transmitter 1,850g
Receiver 2,000g
Detection System Photoelectric beam + Microwave Dry contact relay output 1C Reset time: Detection time + delay Alarm Output time (approx. 2sec.) 30V (AC/DC) 1A Max Supply Voltage 12 to 30V DC
Power Consumption 175mA Alarm Output: And-gated or Or-gated available Environmental Output Features 4 frequencies selectable Automatic gain control (AGC) circuit Monitor jack Optional Pole cover (BP-100COM) External Dimensions W130mm × H703mm × D126mm Weight
Transmitter 2,120g
Receiver 2,270g
09
PASSIVE INFRARED SENSORS (For outdoor use) Model
MS-12TE
(Dual Zone: Variable Angle up to 90 degrees)
MS-12TE
Detection System Alarm Output Supply Voltage
MS-12FE
Twin
Twin × 2
Dry contact relay output: N/C or N/O selectable 30V (AC/DC) 0.5A Max Reset time: approx 2sec. ~ 5min. 12 to 30V DC (non-polarity)
Power Consumption
(2 Dual Zone: Variable Angle up to 180 degrees)
MS-12FE
Passive infrared
35mA
40mA
Ambient Temperature
−4°F to +122°F (−20°C to +50°C)
Mounting Position
Indoor/Outdoor
External Dimensions IP Rating
W80mm × H234mm × D91mm 54
Weight
390g
470g
Detection System Passive infrared (Twin × 2)
OMS-12FE
Dry contact relay output N.C./N.O. selectable • Contact capacity: 30V (AC/DC), Alarm Output 0.2A MAX. (Resistive load) • Contact operation: Detection time (2sec) Dry contact relay output N.C. Tamper Output • Contact capacity: 30V (AC/DC), 0.1A MAX. (Resistive load)
(Dual Zone: Detection Area up to 180 degrees)
Supply Voltage 9 to 28V DC (non-polarity)
C
Current Consumption 20mA MAX.
M
Ambient Temperature −4°F to +122°F (−20°C to +50°C)
Y
External Dimensions W94mm × H234mm × D77.5mm
CM
• Back tamper
MY
TX-114FR
CY
(2 Dual Zone: Variable Angle up to 180 degrees)
IP Rating
54
Weight
470g
Model
TX-114FR TX-114TR TX-114SR
Detection System
CMY
K
Operation Supply Power
TX-114TR/TX-114SR
Current Consumption
(Dual Zone: Variable Angle up to 90 degrees)
Passive infrared
Twin × 2
Twin
10VDC · 0.01A Max • Alarm output (Blue wires) • Tamper output (Green wires) • Trouble output
10VDC · 0.01A Max • Alarm output • Tamper output • Trouble output
3V to 9V DC Alkaline or Lithium Battery 35µA
25µA
5mA/3V (Test mode)
Ambient Temperature
−4°F to +122°F (−20°C to +50°C) W91mm × H245mm × W80mm × H234mm × External Dimensions D116.5mm D88mm
TX-114FR/114TR TX-114SR
IP Rating
• Battery operated
Weight
PIR-T15WE(W)/(G)
In the setting of installation height : 9' (2.7m) distance : 50' (15m)
Wide angle protection (Coverage 15m) [Top view]
54
620g
560g
400g
Detection System Passive infrared (Triple mirror) Alarm Output
Dry contact(semi-conductor) output N.C./N.O. 24V (AC/DC) 0.25A (resistive load)
Supply Voltage 9 to 28V DC (non-polarity) Power Consumption Max. 40mA 80°
Features
Ambient Temparature −13°F to +131°F (−25°C to +55°C)
[Side view]
3.8'(1.25m)
°
.5
42
16' (5m)
°
3
3.5
33' (10m)
15°
° 52
°
61°
26
72°
20°
49' (15m)
1.3'(0.4m)
1.2'(0.35m)
1.3'(0.4m)
9°
1.3'(0.4m)
6°
3.8'(1.25m)
9' (2.7m)
0
• External output • Sensitivity selection • Operation mode selection (4 modes) • 2m to 6m Installation height • Lightning Protection • Pet immunity • Back tamper
Cross-section surface of the center zone
Mounting Position Indoor or outdoor wall IP Rating
55
Weight
600g
: Wireless ready version
10
www.takex.com
PASSIVE INFRARED SENSORS (For outdoor use) In the setting of installation height : 9' (2.7m) distance : 50' (15m)
PIR-T15AM(W)/(G)
Wide angle protection (Coverage 15m) [Top view]
Detection System Passive infrared (Triple mirror) Alarm Output
Dry contact(semi-conductor) output N.C./N.O. 24V (AC/DC) 0.25A (resistive load)
Supply Voltage 9 to 28V DC (non-polarity) Power Consumption Max. 50mA 80°
Features
[Side view]
42
°
.5
16' (5m)
°
.5
33
33' (10m)
15°
°
52
°
61°
26
72°
20°
49' (15m)
1.3'(0.4m)
1.2'(0.35m)
9°
1.3'(0.4m)
1.3'(0.4m) 3.8'(1.25m)
6°
0
Ambient Temparature −13°F to +131°F (−25°C to +55°C)
3.8'(1.25m)
9' (2.7m)
Cross-section surface of the center zone
MS-100E
• 4 detection patterns available (Wide angle · Vertical curtain · long range · Spot) • Possible mounting on ceiling or wall • Possible mounting on pole and metal plate (with optional accessories) • Rain-proof housing for outdoor installation
C
M
Y
CM
MY
PA-15WE
CY
Mounting Position Indoor or outdoor wall IP Rating Weight
600g
Detection System Passive infrared (Twin) Alarm Output
K
55
Detection System Passive infrared (Twin) Dry contact relay output: N/C or N/O selectable Alarm Output Reset time: approx 2sec. 30V (AC/DC) 0.5A Max Supply Voltage 10.5 to 28V DC (non-polarity) Power Consumption 30mA Wide angle 10m Max. Vertical curtain 10m Max. Detection Area Long range 20m Max. Spot 3m Max. Ambient Temperature −4°F to +122°F (−20°C to +50°C) Mounting Position Wall, ceiling, pole, metal plate (indoor, outdoor) Pole cover, Pole attachment, Wall mount bracket, Optional Wall / Ceiling attachment, Magnetic sheet. External Dimensions W77mm × H171mm × D70mm IP Rating 44 Weight 220g
Wide angle protection (Coverage: 15m)
CMY
• External output • Sensitivity selection • Operation mode selection (4 modes) • 2m to 6m Installation height • Lightning Protection • Pet immunity • Back tamper • Anti-masking
Dry contact relay output: 1c Reset time: approx 2sec. 30V (AC/DC) 0.5A Max
Supply Voltage 10.5 to 30V DC (non-polarity)
PA-30NE
Long range protection (Coverage: 30m)
Power Consumption 25mA Ambient Temperature −4°F to +122°F (−20°C to +50°C) Mounting Position Indoor, outdoor Optional
Pole attachment, Vise
External Dimensions 72mm dia × 211mm • Rain-proof housing • Attachable to ceiling, wall, pole • Easy angle adjustment
PIR-30WE
Wide angle protection (Coverage: 30m)
PIR-50NE
Vertical curtain protection (Coverage: 50m)
IP Rating
43
Weight
500g
Detection System Passive infrared Alarm Output Dry contact (semi-conductor) output: N.C./N.O. 24V (AC/DC) 0.25A (resistive load) Supply Voltage 9 to 30V DC (non-polarity) Power Consumption 30mA • Low supply voltage alarm • Tamper signal • LED control (L/C) Features • Alarm LED (ON/OFF) • Sensitivity adjustable between 30% and 170% Ambient Temperature −4°F to +122°F (−20°C to +50°C) Mounting Position Indoor or outdoor wall Optional
Water-proof grommet, Tapping screw
IP Rating
55
External Dimensions 184.5mm dia. × 136mm • Protection area designed especially for high mounting positions
www.takex.com
Weight
1,600g
11
PASSIVE INFRARED SENSORS PA-6612E
"TWIN MIRROR" PIR Wide angle protection (Coverage: 12m)
Detection System Passive infrared (Twin × 2) Alarm Output
Dry contact (semi-conductor) relay output N/O or N/C selectable Reset time: 2sec. 24V (AC/DC) 0.25A Max
Supply Voltage 10.5V to 28V DC (non-polarity) Power Consumption 25mA Features • Drastically reduced false alarm caused by small animals, with new twin optical system.
Pulse count LED control
Ambient Temperature +5°F to +131°F (−15°C to +55°C) Mounting Position Ceiling, wall (indoor) Optional
Ceiling / wall mount attachment
External Dimensions 120mm dia × 55mm Weight
PA-6805E
Spot protection (Coverage: H4.9m × 4m dia)
135g
Detection System Passive infrared (Twin) Alarm Output
Dry contact (Semi-conductor) output: N/C or N/O selectable Reset time: approx. 2sec. 24V (AC/DC) 0.25A Max
Supply Voltage 10.5 to 28V DC (non-polarity)
PA-6810E
360° Round protection (Coverage: H4.9m × 15.2m dia)
C
Power Consumption 25mA: N/C Features
Alarm LED control Pulse count
Ambient Temperature +5°F to +131°F (−15°C to +55°C)
M
Mounting Position Ceiling, wall (indoor)
Y
Optional
CM
External Dimensions 120mm dia × 47mm
BU-6800
Weight
MY
PA-6812E
CY
Wide angle protection (Coverage: 12m)
CMY
K
Ceiling / wall mount attachment 110g
Detection System Passive infrared (Twin) Alarm Output
Dry contact (Semi-conductor) output: N/C or N/O selectable Reset time: approx. 2sec. 24V (AC/DC) 0.25A Max
Supply Voltage 10.5 to 28V DC (non-polarity) Power Consumption 25mA: N/C
PA-6820E
Vertical curtain protection (Coverage: 20m)
Features
Alarm LED control Pulse count (PA-6812E only)
Ambient Temperature +5°F to +131°F (−15°C to +55°C) Mounting Position Ceiling, wall (indoor) Optional
Ceiling / wall mount attachment
External Dimensions 120mm dia × 47mm
BU-6800
Weight
PA-8410E
Wide angle protection (Coverage: 10m)
PA-8420E
Vertical curtain protection (Coverage: 20m)
110g
Detection System Passive infrared Dry contact (semi-conductor) output: Alarm Output N.C./N.O. 24V (AC/DC) 0.25A (resistive load) Supply Voltage 9 to 30V DC (non-polarity) Power Consumption 30mA Features
• Trouble alarm • Low supply voltage alarm • Tamper output • LED control • Area control • Alarm LED (ON/OFF) • Sensitivity adjustable for 60/80/100/120% • Pulse count selectable for 1/2/3/4 (PA8410E only)
Ambient Temperature −4°F to +122°F (−20°C to +50°C) Mounting Position Indoor or outdoor ceiling
Optional
Water-proof grommet, Tapping screw
IP Rating
55
External Dimensions 184.5mm dia × 136mm
• Protection area designed especially for high mounting positions
12
Weight
950g
www.takex.com
PASSIVE INFRARED SENSORS PA-7012E
Wide angle protection (Coverage: 12m)
Detection System Passive infrared (Quad) Alarm Output
Dry contact relay output: 1c Reset time: approx. 2sec. 30V (AC/DC) 0.1A Max
Supply Voltage 9 to 18V DC (non-polarity) Power Consumption 30mA
PA-7030E
Vertical curtain protection (Coverage: 30m)
Features
Alarm memory
Ambient Temperature +14°F to +122°F (−10°C to +50°C) Mounting Position Ceiling, wall (indoor) Optional
Flush mount attachment
External Dimensions 144mm dia × 92mm
BU-7000
Weight
PA-7100E
360° Round protection (Coverage: 100m2)
330g
Detection System Passive infrared (Two quad) Alarm Output
Dry contact relay output: 1c Reset time: approx. 2sec. 30V (AC/DC) 0.1A Max
Supply Voltage 9 to 18V DC (non-polarity) Power Consumption 30mA Features
Manual memory
Ambient Temperature +14°F to +122°F (−10°C to +50°C)
C
M
Mounting Position Ceiling (indoor)
Y
Optional
CM
External Dimensions 144mm dia × 92mm
BU-7000
MY
Weight
PA-5312E
CY
Wide angle protection (Coverage: 12m)
CMY
K
PA-5325E
Vertical curtain protection (Coverage: 25m)
BU-5300
Flush mount attachment
• Slight motion detection.
PA-6412PI (PET IMMUNE) Wide angle protection (Coverage: 12m)
330g
Detection System Passive infrared (Quad) Dry contact relay output: N/O or N/C selectable Alarm Output Reset time: approx. 2sec. 30V (AC/DC) 0.25A Max Supply Voltage 9.5V to 30V DC (non-polarity) Power Consumption 25mA Fuzzy Logic Trouble Output • Malfunction of equipment Features • Low voltage • Failure to replace • Self-check up of alarm contact output Ambient Temperature +14°F to +122°F (−10°C to +50°C) Mounting Position Ceiling, wall (indoor) Optional Flush mount attachment, Level checker External Dimensions 147.3mm dia × 59mm Weight 250g Detection System Passive infrared (Twin)
Alarm Output
Dry contact (Semi-conductor) output: N/C or N/O selectable Reset time: approx. 2sec. 24V (AC/DC) 0.25A Max
Supply Voltage 10 to 18VDC (non-polarity) Power Consumption 25mA Features
Pulse count LED disable switch Low voltage alarm
Ambient Temperature +5°F to +131°F (−15°C to +55°C) Mounting Position Indoor ceiling Optional
Ceiling / wall mount attachment
External Dimensions 147mm dia × 60mm • 18 kg pet immunity with multiple zone technology
www.takex.com
Weight
160g
13
PASSIVE INFRARED SENSORS PA-370
Wide angle / Vertical curtain protection (lens replacement) (Coverage: H5m × W6.7m)
PA-450E
Wide angle protection (Coverage: 11m)
C
M
Y
CM
Detection System Passive infrared (Twin) Dry contact (semi-conductor) relay output Alarm Output N/O or N/C selectable Reset time: 2sec. 24V (AC/DC) 0.25A Max Supply Voltage 10 to 18V DC (non-polarity) Power Consumption 25mA Pulse count LED disable switch Features Low voltage alarm Auto reset memory Ambient Temperature +5°F to +131°F (−15°C to +55°C) Mounting Position Ceiling, wall (indoor) Ceiling / wall mount attachment, Optional Line protection lens External Dimensions 120mm dia × 45mm Weight 120g Detection System Passive infrared (Twin) Dry contact (semi-conductor) relay output Alarm Output N/O or N/C selectable Reset time: 2sec. 24V (AC/DC) 0.25A Max Supply Voltage 9 to 18V DC (non-polarity) Power Consumption 25mA Pulse count LED disable switch Features Low voltage alarm Auto reset memory Ambient Temperature +5°F to +131°F (−15°C to +55°C) Mounting Position Wall, wall corner (indoor) Optional Ceiling / wall mount attachment External Dimensions W70mm × H110mm × D45mm Weight
MY
PA-450PI (PET IMMUNE)
CY
Wide angle protection (Coverage: 11m)
CMY
K
120g
Detection System Passive infrared (Twin) Dry contact (semi-conductor) relay output Alarm Output N/O or N/C selectable Reset time: 2sec. 24V (AC/DC) 0.25A Max Supply Voltage 10 to 18V DC (non-polarity) Power Consumption 25mA Pulse count LED disable switch Features Low voltage alarm Auto reset memory Ambient Temperature +5°F to +131°F (−15°C to +55°C) Mounting Position Wall, wall corner (indoor)
• 20kg pet immunity with multiple zone technology
PA-460E
Vertical curtain protection (Coverage: 16.5m)
14
Optional
Ceiling / wall mount attachment
Weight
120g
Weight
120g
External Dimensions W70mm × H110mm × D45mm
Detection System Passive infrared (Twin) Dry contact (semi-conductor) relay output Alarm Output N/O or N/C selectable Reset time: 2sec. 24V (AC/DC) 0.25A Max Supply Voltage 9 to 18V DC (non-polarity) Power Consumption 25mA LED disable switch Features Low voltage alarm Auto reset memory Ambient Temperature +5°F to +131°F (−15°C to +55°C) Mounting Position Wall, wall corner (indoor) Optional Ceiling / wall mount attachment External Dimensions W70mm × H110mm × D45mm
www.takex.com
PASSIVE INFRARED SENSORS PA-470L
Wide angle / Vertical curtain protection (lens replacement) • Wide angle protection (Coverage: 16m) • Vertical curtain protection (Coverage: 20m)
Detection System Passive infrared (Quad) Dry contact relay output: N/C or N/O (changeover on switch) Alarm Output Reset time: approx. 2sec. 30V (AC/DC) 0.25A Max Supply Voltage 9 to 18V DC (non-polarity) Power Consumption 28mA Memory control Features LED control Low voltage Ambient Temperature +14°F to +122°F (−10°C to +50°C) Mounting Position Wall, wall corner (indoor)
Optional
Ceiling, wall mount attachment
Weight
165g
External Dimensions W90mm × H127mm × D62.5mm
PA-480S
Wide angle protection (180 ) (Coverage: 8m)
Detection System Passive infrared (Twin) Alarm Output
Dry contact relay output: N/C Reset time: approx. 2sec. 30V (AC/DC) 0.1A Max
Supply Voltage 9 to 18V DC (non-polarity) Power Consumption 32mA Features
Low voltage alarm Area adjustment (downward 5 positions)
Ambient Temperature +14°F to +122°F (−10°C to +50°C) C
Mounting Position Wall, wall corner (indoor)
M
Optional
Ceiling / wall mount attachment
External Dimensions W90mm × H127mm × D62.5mm
Y
Weight
CM
PA-4810E
MY
Wide angle protection (Coverage: 12m)
CY
CMY
K
PA-4820E
Vertical curtain protection (Coverage: 25m)
165g
Detection System Passive infrared (Quad) Dry contact relay output: N/C or N/O (changeover on switch) Alarm Output Reset time: approx. 2sec. 30V (AC/DC) 0.25A Max Supply Voltage 10 to 30V DC (non-polarity) Power Consumption 32mA Slight motion detection Features Memory control LED control Trouble alarm Ambient Temperature +14°F to +122°F (−10°C to +50°C) Mounting Position Wall, wall corner (indoor)
Optional
Ceiling / wall mount attachment
Weight
165g
External Dimensions W90mm × H127mm × D60mm
ANTI-MASKING BASE UNIT BP-150AE • Anti-masking functionality • Tamper output
Detection System Direct reflection system by near infrared Dry contact (Semi-conductor) output N/C Trouble Alarm Rating: 24V AC/DC Max. 0.25A Contact protection resistor 3.3 ohms Output OR-gated with tamper output Supply Voltage 10.5 to 30VDC Power Consumption 15mA Compatible Models
PA-6812E, PA-6820E, PA-6805E, PA-6810E, PA-6612E, FS-2000E
Mounting Position Indoor ceiling
External Dimensions 150mm dia × 15mm Weight
www.takex.com
120g
15
FLAME SENSORS FS-1000E
(Ultraviolet rays detection system)
Detection System Ultraviolet rays detection Detection Distance
10m (7cm lighter flame 10m ahead)
Power Supply
Alkali battery (LR-6) × 2 or 9 to 30V DC
Power Consumption 50mA
• High sensitivity an instant flame detection • External output system extension • Versatile, high quality and low cost
Open collector (semi-conductor) output N/O External Output 30V DC · 50mA Max Delay time (approx. 10sec) Mounting Position Ceiling, wall (indoor) External Dimensions 120mm dia × 40mm Weight
FS-2000E
(Ultraviolet rays detection system)
200g
Detection System Ultraviolet rays detection Detection Distance
10m (7cm lighter flame 10m ahead)
Supply Voltage 10 to 30V DC (non-polarity) Stand-by: 25mA or less Power Consumption Alarm: 75mA or less with buzzer 40mA or less without buzzer
C
M
• High sensitivity an instant flame detection • Detection area adjustment, Tamper, Alarm memory, Form C output are added to FS-1000E
Y
CM
MY
FS-3500E(W)/(B)
CY
CMY
Dry contact relay Form C External Output Action: offdelay 2sec. Capacity: 30V (AC/DC) 0.3A Mounting Position Ceiling, wall (indoor) External Dimensions 120mm dia × 40mm Weight
150g
Detection System Ultraviolet rays detection Detection Distance 10m (7cm lighter flame)
Type-AA alkaline battery (LR6) 2pcs (not included) External wiring DC10-30V (Polarized) Stand by: 40mA or less Power Consumption Alarm: 300mA or less Type-AA alkaline battery: Approx. Battery Life 2 years (Stand by) "Japanese" "English" "Chinese" Warning Message "Korean" "Spanish" Relay contact output N.O./N.C. External Output Detection time plus 2 sec. Output 30V DC 0.1A Power Supply
K
• Instant flame detection • Selectable warning message among 5 languages and 2 kinds • Repeated message • Battery operation
FS-5000E
(Ultraviolet rays detection system - Outdoor)
Mounting Position Indoor
Weight
180g (battery excluded)
Detection System Ultraviolet rays detection Detection Distance Abt.10meters with 7cm flame Power Supply
DC10 - 30V (Non-polarity)
Power Consumption 35mA or less Dry contact relay Form C External Output Contact capacity: 30V (AC/DC) 0.5A or less
• Instant flame detection • Rain-proof housing • Day/Night discernment function • Detection time setting • Output time set up
16
Ambient Temperature −4°F to +122°F (−20°C to +50°C) Installation
Outdoor, Indoor
IP Rating
43
Weight
550g
www.takex.com
FLAME SENSOR TX-124R
• Battery operated • Instant flame detection • Rain-proof housing • Detection time setting
Detection System Ultraviolet rays detection 33ft. (10 m) : (Gas Flame of Lighter in front of sensor: approx. : 2.75" (7cm)) Detection Distance 100ft. (30 m) : (Flame of N-heptane on fire plate 15cm × 15cm: approx. : 23.62" (60cm)) *The flame size is rough. (Red/Black wires) Supply Voltage DC3V (CR-123A) Standby: 55µA Max, Current Consumption Detection: 5mA Max (Blue/White wires) Solid State Switch N.C 3VDC · 0.01A Max Detection Output Output when detecting Ultraviolet, Real time + delay time 2 sec Ambient Temperature −4°F to +122°F (−20°C to +50°C) IP Rating Weight
43
510g
: Wireless ready version
GLASS SENSORS GS-1100E
C
Detection System Ultrasonic
(Coverage: 7m × 8m)
M
Y
Alarm Output
CM
Dry contact relay output: N/C Reset time: approx. 2sec 30V (AC/DC) 0.1A Max
MY
Supply Voltage 9 to 20V DC (non-polarity)
CY
Power Consumption 30mA
CMY
Ambient Temperature +14°F to +122°F (−10°C to +50°C)
K
• Wall-mount microphone • Wall mount type
Mounting Position Wall (indoor) Optional
External Dimensions W70mm × H110mm × D32mm Weight
GS-02 (Straight cord) GS-02C (Curled cord)
(Coverage: radius 180cm max)
Glass checker 120g
Detection System Piezoelectric type Alarm Output
Dry contact relay output: N/C Reset time: approx. 2sec 30V (AC/DC) 0.5A Max
Supply Voltage 10.5 to 15V (non-polarity) Power Consumption 20mA Features
Memory reset
Ambient Temperature −22°F to +131°F (−30°C to +55°C) • Piezoelectric type • Memory reset function
Mounting Position Surface of glass (indoor) Optional Weight
www.takex.com
Glass checker, Glue
External Dimensions 37mm dia × 15mm 30g (GS-02)
50g (GS-02C)
17
AUTO DOOR SENSORS (Photoelectric Beam) DA-101E (Silver)
Detection System Near infrared beam direct reflection Max Installation Height 3,000mm Main body adjustable angle: 0˚ to +10˚ Area Adjustable Angle Depth: 1line Width: adjustable by area switch Power Supply
12 to 110V AC or DC ± 10%
1.8VA or less at 100V AC Power Consumption 1.0VA or less at 12V AC 80mA or less at 12V DC 1.3VA or less at 24V AC 40mA or less at 24V DC External Output
Dry contact relay N/O, 50V DC 0.1A or less
Output Holding Time Approx. 0.5 seconds • Near infrared beam type • Ultra-slim 30mm body • Excellent external light immunity • Selectable frequency
Stationary Detection Time
2, 15, 60 and 180sec. selectable by dip switch
Ambient Temperature −4°F to +140°F (−20°C to +60°C) External Dimensions W212mm × H65mm × D35mm Weight
DA-301E (Silver)
190g
Detection System Near infrared beam direct reflection Max Installation Height 3,000mm Main body adjustable angle: 0˚ to +5˚ Area Adjustable Angle Depth: 1line to 4 lines Width: Adjustable by switch
C
M
Y
CM
Power Supply
12 to 24V AC or DC ± 10%
Power Consumption
1.3VA at AC24V, 1.0VA at AC12V 40mA at DC24V, 80mA at DC12V
External Output
Dry contact relay N/O, 50V DC 0.1A or less
MY
CY
• Near infrared beam type • Super-slim 30mm body • High-density detection pattern with 4 lines depth and each 8 areas per line • Stationary detection • Excellent external light immunity • Selectable frequency
CMY
K
Output Holding Time Approx. 0.5 seconds Stationary Detection Time 2, 15, 60sec. and selectable by dip switch Ambient Temperature −4°F to +140°F (−20°C to +60°C) External Dimensions W212mm × H65mm × D30mm Weight
DA-3001
(Silver, Bronze, White, Black, Soutien collar, Mirror)
190g
Detection System Near infrared beam direct reflection Max Installation Height 3,200mm Start area: 0˚ to 10˚ (Set using the area adjustment lever) Presence area: 0˚ to 8˚ (Set using the area adjustment lever) Area Variable Range Monitor area: 2 to 5 rows (Set using the DIP switch) Single/Both sliding: Set using the area mask Power Supply
12 to 100 VAC or DC ±10% 50/60Hz
3.8 VA max. for 100V AC Power Consumption 2.2 VA for 12V AC, 3.0 VA for 24V AC 120mA for 12V DC, 70mA for 24V DC External Output
Dry contact relay output N.O. 50V DC: 0.1A (resistive load)
Output Holding Time Approx. 0.5 sec Start area: 2 sec., 15 sec., 60 min., Infinity Stillness Holding Time Presence area: 2 sec., 15 sec., 60 min., Infinity (Set using the DIP switch) Ambient Temperature −4°F to +140°F (−20°C to +60°C) External Dimensions W230mm × H66.5mm × D33.5mm Weight
18
250g
www.takex.com
AUTO DOOR SENSORS (Photoelectric Beam) Detection System Near infrared beam direct reflection
DA-4700
Max Installation Height 4,700mm
(Silver)
Front view〔Max〕 3.0m 2.0m 1.0m 9.9’ 6.6’ 3.3’
0
Front view〔Minimum〕
1.0m 2.0m 3.0m 3.3’ 6.6’ 9.9’
3.0m 2.0m 1.0m 9.9’ 6.6’ 3.3’
1.0m 3.3’
1.0m 3.3’
2.0m 6.6’
2.0m 6.6’
3.0m 9.9’
3.0m 9.9’
4.0m 13.1’
4.0m 13.1’
4.7m 15.4’
4.7m 15.4’
Side view 5.0m 4.0m 3.0m 2.0m 1.0m 16.4’ 13.1’ 9.9’ 6.6’ 3.3’ 1.0m 3.3’ 2.0m 6.6’ 3.0m 9.9’ 4.0m 13.1’ 4.7m 15.4’
Max
Min
Shifting
1.0m 2.0m 3.0m 3.3’ 6.6’ 9.9’
<Depth> *Fine adjustment angle of the sensor body : 0 to 15˚C *The number of defection row selectable from 2/3/4 Area Variable Range <Width> *1 row sift for narrow side. (by Lens slide) *The number of defection row selectable from 6/4/2 (both light and left) Power Supply
Power Consumption
12 to 24 V AC or DC ±10%
2.5VA for 12V AC, 2.5VA for 24V AC 140mA for 12V DC, 65mA for 24V DC
Output 1 : Dry contact relay output N.O/N.C (Selectable) 50V DC : 0.1A(resistive load) No.1,2,3,4,5 row detect or No.4,5 row detect selectable External Out put Output 2 : Dry contact MOS relay output N.C 50V DC : 0.1A(resistive load) Only No.1,2,3 row detect *Fail-Safe Output Holding Time Approx 0.5 Sec Stillness Holding Time
2,15,60/sec, Infinity at No.1,2,3 row 2,15/sec at No.4,5 row
Ambient Temperature −4°F to +140°F (−20°C to +60°C) External Dimension W265mm × H61mm × D37.5mm Weight
SHA-6501
C
(Gold)
M
290g
Detection System Near infrared beam direct reflection Max Installation Height 6,500mm Area Adjustable Angle Max 15˚
Y
CM
Power Supply
12 to 24 VAC or DC ±10% 50/60Hz
Power Consumption
2.8 VA for 12V AC, 2.8 VA for 24V AC 180mA for 12V DC, 90mA for 24V DC
External Output
Dry contact relay output N.O. 50V DC: 0.1A (resistive load)
MY
CY
CMY
K
Ambient Temperature −4°F to +140°F (−20°C to +60°C) External Dimensions W321mm × H101.8mm × D90.5mm Weight
830g
AUTO DOOR SENSOR (Passive Infrared) PS-520E
(White, Silver) (Coverage: H4m × W2.4m)
Detection System Passive Infrared
Alarm Output
Dry contact relay output: 2c Hold time: Adjustable approx. 0.25sec to 60sec 30V (AC/DC) 1A
Supply Voltage 12 to 24V DC Power Consumption 40mA / DC 70mA / AC Ambient Temperature +14°F to +122°F (−10°C to +50°C) Mounting Position Wall, Ceiling (indoor) External Dimensions W160mm × H60mm × D40mm Weight
www.takex.com
170g
19
SPEECH WARNING DEVICES
[ DESIGN PENDING : 2 ]
Sensor speaker sends a message such like guidance or warning automatically when the built-in sensor detects people. Sensor speaker with contact output model is available, so this can be used as burglar alarm for security purpose. PV-12
Detection System Passive infrared
• Horn speaker type • Recording time is 8sec max • You can record only by speaking to microphone
Coverage Area
(12V DC ∙ with alarm output) Wide angle protection (Coverage 12m max.)
Supply Voltage 12V DC Voice Output
2W
Alarm Output
Dry contact relay output: 1c Reset time: approx. 8 sec 30V (AC/DC) 0.5A
External Dimensions W115mm × H172mm × D289mm Weight
C
PVW-12TE
M
• Two recordable messages with playback • You can select message for day and night • Contact input can trigger messages • Reliable PIR with dual zone system • microphone and jack are equipped for recording message • Rain-proof housing
Y
CM
MY
CY
1,000g
Detection System Passive infrared Horizontal coverage Coverage Area Max. detection distance 12m Detection angle 90˚ Supply Voltage 10 to 30V DC Current Consumption
55mA Max. for standby 300mA Max. for operation
Dry contact relay output NO/NC selectable with a switch Contact Output Contact capacity: 30V (AC/DC), 0.5A Max. Contact operation: One shot operation Approx. 2 sec.
CMY
K
External Dimensions W80mm × H234mm × D91mm Weight
480g
PBS-15T
Detection System Simultaneous breaking of 2 beams
• Detection distance: 15m • Frequency is selectable for L or H to avoid cross talk • Response time is adjustable between 0.05 sec. and 0.7 sec. • AGC circuit • Frost proof cover
Supply Voltage 10 to 18V DC (Non-polarity) Current Consumption
Transmitter: 24mA Receiver: 250mA
Alarm Output
Dry contact relay output N.C./N.O. selectable 30V AC/DC 0.5A (resistive load) Contact action: Interruption time (Min.2 sec.)
External Dimensions W73mm × H332mm × D67.2mm Weight
20
Transmitter: 560g Receiver: 620g
www.takex.com
VOICE SPEAKER AV-100E
• To give an audio message after being triggered by a PIR etc • Recording time is 8sec., Max. • You can record only by speaking into microphone
Supply Voltage 12V DC Voice Output
2W Max
Alarm Input
Dry contact N/O
External Dimensions W115mm × H172mm × D289mm Weight
1,000g
SENSOR SWITCH MS-60E
Directional detection (Coverage: 0.5 to 6.0m) • Direction Conscious Sensor • Rain-proof housing • Adjustable output timer (approx. 5sec to 5min) • Selectable day or night time operation
Detection System Passive infrared Alarm Output
Dry contact relay output: N.C/N.O selectable Output time: detection time + Offdelay approx. 5sec to 5min 30V (AC/DC) 0.5A
Supply Voltage 10.5 to 30V DC (non polarity) Power Consumption 40mA
External Dimensions W77mm × H171mm × D70mm Weight
220g
C
M
Y
CM
MY
CY
CMY
K
www.takex.com
21
ACCESSORIES (For Photoelectric Beam Sensors) BH-200
for PH-200SE/ 600SE
BL-5 BL-10 BL-30
for PR-1B/5B for PR-10B for PH-50B
BL-11
for PR-11BE
BP-5B BP-5D
for PR-1B, PR-5B
BP-5C
for PR-5B/ PB-4RNS/ 4RTNS
BP-50COM
for COM-IN50HF
BP-50MW
for MW-50
BP-60A
for PB-TK/ PB-TE
BP-60TE
for PB-TK/ PB-TE
BP-100COM
for COM-IN100A
BP-200F
for PB-F, PB-IN-HF, PB-IN-100AT
BP-200X
Pole cover
for PXB/ TXF-125E
BR-5
for PR-5B/ PB-4RNS/ 4RTNS for PR-10B/ 10BU
BS-50F
for PB-F, Pole side cover PB-IN-HF, PB-IN-100AT
BS-50X
for PXB
BU-50F
for PB-F, PB-IN-HF, PB-IN-100AT
ER-02
for PXB/PB series
HTF-24AE
for PXB
HTF-24E
for PB-F, PB-IN-HF, PB-IN-100AT
KH-120A
for outdoor type sensor
SEC Circuit
Environmental
for PH-200SE/ 600SE
BR-S3
for PR-S3
Long hood
Flush mount plate
Pole cover
Pole cover
C
M
BR-10
Y
Reflector
L fittings
Flush mount plate (For reflector type)
Pole attachment
Pole cover
L fittings
Pole cover
Pole cover
Pole side cover
CM
MY
CY
Flush mount attachment
CMY
Wireless alignment checker
Heater
K
(24V DC)
HTF-100
Housing case
KH-120S
Housing case (Stainless type)
(100V AC) Heater
ACCESSORIES (For Shutter Sensors) BF-S3
for BR-S3/ M5
BR-M5
for SH-M5
BS-S3
for PR-S3, SH-M5
BZ-S2
for PR-S3, SH-M5
Sheet bracket
Sensor bracket (for over slide shutter use)
22
Magnetic sheet
Sensor bracket
Reflection sheet
www.takex.com
ACCESSORIES (For Outdoor Passive Infrared Sensors) BCW-401
for MS-100E
BL-8400
for PA-8410/ 8420, PIR30WE/50NE
BP-01
Pole attachment
for PA-15WE/ 30NE
BP-02
Pole attachment
for PA-15WE/ 30NE, PIR-T15WE
BP-03
for PA-8410/ 8420, PIR30WE/50NE
BP-11
for MS-100E
BP-12
for MS-100E
BP-22
Pole attachment
for MS-12TE/ 12FE, PIR-T15
BP-22F
for PIR-T15WE
BP-32
for TX-114/ OMS-12FE
BR-M5
for MS-100E
BU-8400
for PA-8410/ 8420
BV-03
for PA-15WE/ 30NE
BW-14
for MS-100E
BW-24
for MS-12TE/ 12FE
KP-32
for PIR-T15WE
WO-3D
for PIR-15WE/ 50NE
BU-5300 BU-6800 BU-7000
for PA-5312/25/ 6800/7000
Wall/ceiling attachment
Pole attachment
Pole attachment
C
M
Vise attachment
Wall mount attachment
Pole attachment
Magnetic sheet
Wall mount bracket
Pole cover
Pole attachment
Embedding attachment
Wall mount bracket
Y
CM
MY
CY
CMY
Ceiling attachment
Wall bracket
K
ACCESSORIES (For Passive Infrared Sensors) BCW-401
Wall/ceiling attachment
EL-02
Security level checker
www.takex.com
for PA-450/460/ 470/480/ 6612/6800 series
BL-5000
Wall mount attachment
for all ceiling mount series
Flash mount attachment
for PA-5312/25
23
BEAM TOWER ENCLOSURES
TAS-100/150/200/300
180°SINGLE SIDED FLOOR MOUNT
TAD-100/150/200/300
360°DOUBLE SIDED WALL MOUNT
TAW-100/150/200/300 180°SINGLE SIDED WALL MOUNT
FEATURES C
M
Y
CM
MY
CY
CMY
● Choose from floor or wall mount models, in single and double sided variants ● Available in 1m, 1.5m, 2m or 3m heights ● Anodized aluminium column for high resistance to oxidation ● Tamper protected lid prevents unauthorised access ● Vandal resistant polycarbonate covers ● Wide range of accessories available to suit the most demading of site requirements
K
Disguise the mounting height and number of beams from observers with our wall and floor mounted towers HIGH SECURITY
CONSTRUCTION
TAKEX Active Infrared Beams can be mounted on poles, walls, or any convenient structure. Where there is no mounting point, or for additional security, TAKEX Beam Towers are available as attractive but rugged wall or floor-mounted units, with single or double sided variants. Standard heights are 1m, 1.5m, 2m, and 3m.
The central support spine is made from box-section anodized extruded aluminium which is rigid and highly resistant to oxidation. The spine profile is common to all models, allowing easy conversion from single to double-sided towers for system expansion.
VANDAL RESISTANT
BEAM COMPATIBILITY
The tower covers are made from UV and vandal-resistant polycarbonate, completely opaque to disguise the mounting height and number of beams from observers, but transparent in the infra-red spectrum for maximum beam transmission.
TA Series Beam Towers will accept our standard Twin and Quad beam sets, but for preference use TAKEX KH Series Quad beams, designed specifically (and only) for use in TA Towers, and supplied with PTKH Quick-fix mounting brackets for fast, trouble-free assembly.
EASY ADJUSTMENT
ACCESSORIES
Lateral tower side-supports (TAS/TAD models only) ensure solid mounting, with height adjustment available to avoid water-pooling. Beam units and accessories are mounted on slide bolts in vertical channels of the spine, allowing for fast trobuble-free adjustment.
A wide range of accessories including heaters (PTH) and thermostats (PTS), pressure-sensitive anti-climb switches (TAPS) and first-fix bolt sets (CRFB) are available to suit even the most demanding of site requirements.
24
www.takex.com
A
AV-100E
B
BA-6SLA BP-150AE
C
COM-IN-100AL/AH COM-IN-50HFL/HFH
D
DA-101E DA-3001 DA-301E DA-4700 DS-6ND
F
FS-1000E FS-2000E FS-3500E(W)/(B) FS-5000E
C
M
Y
CM
MY
CY
CMY
K
G
GS-02 GS-02C GS-1100E
M
MS-100E MS-12FE MS-12TE MS-60E MW-100AL/AH MW-50L/H
O
OMS-12FE
P
PA-15WE PA-30NE PA-370 PA-450E PA-450PI PA-460E PA-470L PA-480S PA-4810E PA-4820E PA-5312E PA-5325E PA-6412PI PA-6612E PA-6805E PA-6810E PA-6812E PA-6820E
www.takex.com
21
8 15
9 9
18 18 18 19 7
16 16 16 16
17 17 17
11 10 10 21 9 9
10
11 11 14 14 14 14 15 15 15 15 13 13 13 12 12 12 12 12
PA-7012E PA-7030E PA-7100E PA-8410E PA-8420E PB-100AT-KH PB-100EX PB-100F PB-100HF-KH PB-100ST PB-100TK(K) PB-10NS PB-10TNS PB-200EX PB-200F PB-200HF-KH PB-20TE PB-30SU PB-30TK(K) PB-400EX PB-40TE PB-4RNS PB-4RTNS PB-50F PB-50HF-KH PB-60TE PB-60TK(K) PB-IN-100AT PB-IN-100HF PB-IN-200HF PB-IN-50HF PB-IN-75SW PBS-15T PH-200SE PH-600SE PIR-30WE PIR-50NE PIR-T15WE PIR-T15AM PR-10B PR-10BU PR-11B PR-1B PR-5B PR-S3 PS-520E PV-12 PVW-12TE PXB-100ATC PXB-100ATC-KH PXB-100F PXB-100HF PXB-100HF-KH PXB-100SW PXB-200F PXB-200HF PXB-200HF-KH PXB-50F PXB-50HF PXB-50HF-KH
13 13 13 12 12 3 7 1 3 2 4 6 6 7 1 3 4 4 4 7 4 6 6 1 3 4 4 2 1 1 1 8 20 4 4 11 11 10 11 5 5 5 5 5 7 19 20 20 2 3 1 1 3 8 1 1 3 1 1 3
S
SH-M5 SHA-6501
T
TX-114FR TX-114SR TX-114TR TX-124R TXF-125E TXF-125E-KH
7 19
10 10 10 17 2 3
25
C
M
Y
CM
MY
CY
CMY
K
TAKEX AMERICA INC. Australia 4/15 Howleys Road Notting Hill, VIC 3168 Australia tel: +61 (3) 9544 2477 fax: +61 (3) 9543 2342 www.takex.com
North America 151 San Zeno Way Sunnyvale, CA 94086 USA tel: +1 408 747 0100 fax: +1 408 734 1100 www.takex.com
TAKEX EUROPE LTD.
TAKENAKA ENGINEERING CO., LTD.
Europe, Middle East & Africa Aviary Court, Wade Road Basingstoke, Hampshire RG24 8PE United Kingdom tel: +44 (0) 1256 475555 fax: +44 (0) 1256 466268 www.takex.com
Asia 83-1, Gojo-sotokan-nishi, Higashino Yamashina-ku, Kyoto 607-8156 Japan tel: +81 75 501 6651 fax: +81 75 593 3816 www.takex-eng.co.jp