→Kress Commercial Tools for Grounds Maintenance Professionals SUPPLIED BY SPALDINGS
60V BATTERY CHARGERS
60V POWER STATIONS, CHARGERS
KRESS COMMERCIAL KAC875E
5 kWh CYBERTANK
PORTABLE POWER STATION
The 5kWh CyberTank power station is a gamechanger for commercial landscaping, being the only charger that stores energy for all-day work. It offers a revolutionising 8-minute recharge for batteries, ensuring tools are ready for uninterrupted all-day use.
• Charge on-the-go with 5 kWh mega capacity
• 8-minute fast charging (boost mode)
• Air cooling technology GPS and 4G capability
linked to Kress Commercial APP
Rated voltage .......... 48 V
Battery capacity ........ 105 Ah
Battery energy ......... 5040 Wh
Charging ports ......... 3 DC–DC
Input voltage AC 100–240V /50–60 Hz
Charging times CyberNano: 30 min
CyberPack: 8 min
Weight 140 kg
K0031 5kWh CyberTank portable power station (KAC875E).
KRESS COMMERCIAL KAC844 CYBERTANK-LITE
Designed for the professional, the CyberTank Lite DC-DC charging system redefines portability. Built to transfer energy from a CyberCapsule to any CyberPack battery in just 12 minutes. This mobility ensures that your tools can be charged swiftly and efficiently, keeping you operational without the constraints of a fixed charging location.
• DC charging from Cyber
• Capsule battery IPX5-rated
• Charging status and diagnostic alerts
• Air cooling system
• Portable design
Battery Ports 2
Input (via CyberCapsule) 60 V / 30 A
Output voltage 60 V
Charging current 30 A
Charging times CyberPack 240 Wh: 12 min
Weight 11.8 kg
K0030 CyberTank-Lite (KAC844).
KRESS COMMERCIAL KAC840 CYBERPLUG CHARGER
The Kress CyberPlug offers unparalleled convenience for professionals, a compact and portable AC charger capable of revitalising multiple batteries simultaneously. Designed for the dynamic needs of commercial use, it ensures your Kress tools are always ready for action.
• Dual-port design
• IPX5-rated
• Air cooling system
• Charging status and diagnostic alerts
Output voltage 60 V
Charging current ... 30 A
Voltage ............ 110–240 V
Battery type ........ Li-ion
KRESS COMMERCIAL KAC877E
7.2 kWh CYBERTANK PORTABLE POWER STATION
This 8-minute CyberSystem DC-DC charger provides the energy needed for charging any Kress 60 V battery or Kress 60 V CyberPack for the whole day. Charge this up after work and forget about having to spend money on fuel again!
• Charge on-the-go with 7.2 kWh mega capacity
• 8-minute fast charging (boost mode)
• Air cooling system GPS and 4G capability linked to Kress Commercial APP
Rated voltage .......... 48 V
Battery capacity ........ 150 Ah
Battery energy ......... 7200 Wh
Charging ports ......... 3 DC-DC
Input voltage AC 100-240V /50-60 Hz
Charging times CyberPack: 14 min, CyberPack (flash charge): 8 min
Weight 165 kg
K0032 7.2kWh CyberTank portable power station (KAC877E).
4 KRESS COMMERCIAL KAC815 1.5 kWh CYBERCAPSULE
The Kress CyberCapsule is a compact and flexible 1.5 kWh energy storage module for charging batteries when AC outlets are not accessible. This module offers landscapers the flexibility to adjust their energy capacity based on daily requirements by carrying additional CyberCapsules. It can also function as a backpack battery, powering tools directly . Battery-to-battery power source IPX5-rated
Integrated Bluetooth LED battery capacity indicator
Battery voltage ......... 60 V
Battery capacity ........ 25 Ah
Weight ................ 8.1 kg
K0027 60V 1.5 kWh CyberCapsule (KAC815).
6 KRESS COMMERCIAL KAC843 4-PORT EXTENSION CHARGING CASE
Charging times ..... 230Wh:12 min, 660Wh:25 min
Weight ............ 11.5 kg
K0028 60V 30A CyberPlug charger (KAC840).
Charge more batteries in one set-up. This charging case serves as an extension for Kress Commercial chargers or CyberTank, allowing for sequential charging of multiple batteries in one-time setup. Features four battery ports, compatible with all Kress 60V batteries and 60V CyberPack.
K0029 4-Port extended charging case (KAC843).
→Industry leading 60 Volt power
7
60V BATTERY OPTIONS
60V BATTERY OPTIONS
KRESS COMMERCIAL KAC800
240 Wh CYBERPACK NANO COMPACT BATTERY
The compact CyberPack Nano battery, essential for commercial applications where a lightweight and compact battery design is critical – such as the Kress top-handle chainsaw.
The battery seamlessly integrates advanced technology such as Bluetooth and smart battery management.
• IPX5-rated waterproof design
• Integrated Bluetooth
• Delivers stable and consistent high output energy in a compact size
Battery voltage 60 V
Battery capacity 4 Ah Weight 1.6 kg
K0024 60V 240Wh CyberPack Nano compact battery (KAC800).
8
9 KRESS COMMERCIAL KAC804
240 Wh 8-MINUTE CYBERPACK BATTERY
At the core of the Kress CyberSystem lies the revolutionary 8-minute CyberPack battery. Engineered to meet the demands of commercial landscapers, this battery offers unrivalled power and longevity. When connected to the CyberTank charger in boost mode, the battery boasts an unprecedented 8-minute charge time*.
• 8-minute charge *
• Lifespan of 3,000 cycles
• IPX5-rated waterproof design
• Integrated Bluetooth Battery voltage 60 V Battery capacity 4 Ah
Weight 3.0 kg
* When charging with the KAC875L or KAC877L CyberTank chargers in flash mode.
K0025 60V 240Wh 8-minute CyberPack battery (KAC804).
KRESS COMMERCIAL KAC810
660 Wh 8-MINUTE CYBERPACK LARGE CAPACITY BATTERY
Large capacity battery is the perfect energy source for commercial applications where extended runtime is indispensable. This battery delivers unrivalled power, extreme longevity, and an unprecedented 8-minute charge time*. Ideal for use on the mower or as a backpack battery with the ergonomic harness.
• 8-minute charge *
• Lifespan of 3,000 cycles
• IPX5-rated waterproof design
• Integrated Bluetooth
Battery voltage 60 V
Battery capacity 11 Ah
Weight 7.7 kg
* When charging with the KAC875L or KAC877L CyberTank chargers in flash mode.
K0026 60V 660Wh 8-minute CyberPack large capacity battery (KAC810).
The
11 KRESS COMMERCIAL KAC900 BACKPACK BATTERY HARNESS
The Kress Commercial 60 V backpack battery harness combines ergonomic design with practicality, featuring adjustable height for a tailored fit and universal tool compatibility. Constructed to distribute weight evenly, reducing fatigue during long work periods.
• Ergonomic design to suit all body types
• Universal compatibility • 3-position height adjustment
Weight 2.3 kg
K0022 Backpack battery harness (KAC900).
Attach to the backpack harness to improve the tools’ balance.
Weight 1.5kg
K0055 Weight kit (KAC939). • 5+3 year warranty when registered
HOW IT WORKS
1
60V BRUSHCUTTERS
60V GRASS TRIMMERS, BRUSHCUTTERS
→ Powerful yet lightweight trimmer
KRESS COMMERCIAL KC100.9
42cm CORDLESS LINE TRIMMER
The Kress Commercial grass trimmer KC100 is a lightweight powerhouse with a 1.5 kW output comparable to a 30cc commercial 2-stroke trimmer. Perfect for tackling everyday landscaping and dense growth, it’s equipped with a quick-load head for fast line refills.
• Delivers 1.5 kW output
• Quick-load head with 9m spool capacity
• 3-Speed settings with a variable speed trigger
• Heavy-duty steel drive shaft
• Aluminium gearhead
• Compatible with trimmer head & knife blade
• Built-in LED control panel
• IPX4 weather protection
Voltage 60 V
Motor type Brushless
Cutting width 42 cm
Line diameter 2.4 mm
Cutting speed 4,200 / 5,100 / 5,900 rpm
Trimmer head type Rapid reload, Bump feed
Line reload length 9 m
Noise level (LWA) 94.94 dB(A)
Weight (without battery) 4.6 kg
K0001 60V 42cm Grass trimmer (KC100.9) tool only (excluding battery and charger).
2
KRESS COMMERCIAL
42cm CORDLESS BRUSHCUTTER
The Kress KC170 brushcutter with a powerful 1.5 kW output, delivers performance on par with a 30cc petrolpowered model. Balance and manoeuvrability ensure easy handling and reduced fatigue. The ideal heavyduty brushcutter to tackle thick brush with ease.
• Delivers 1.5 kW – equivalent to a 30 cc petrol engine
Tool only, supplied with: 1x trimmer head, 1x debris shield, 1x front handle
• Quick-load head with 9m spool capacity
• 3-Speed settings with a variable speed trigger
• Multi-purpose trimmer guard
• Rigid drive shaft
• Compatible with 105/109/130 mm trimmer head and 25/30 cm knife blade
• LED control panel
• IPX4 weather protection
Voltage
Motor type
Cutting dia (Knife blade) 30 cm
Recommended battery and charger: KAC804 (4.0 Ah), KAC810 (1.0 Ah) with Backpack Harness, KAC840 30A charger.
Cutting dia (Trimmer hd) 42 cm
Line dia 2.4 / 2.7 mm
Line reload length 9 m
Cutting speed 4,200 / 5,100 / 5,900 rpm
Noise level (LWA) 91.7 dB(A)
Weight (without battery) 5.5 kg
K0074 60V 42cm Brushcutter (KC170.9) tool only (excluding battery and charger).
Recommended battery & charger:
KAC804 (4.0 Ah), KAC810 (11.0 Ah) with Backpack Harness, KAC840 30A charger
KRESS COMMERCIAL KC110.9
42cm FRONT MOTOR CORDLESS LINE TRIMMER
The Kress Commercial grass trimmer KC110.9 weighs just 2.97kg, while it’s front-motor design is engineered to provide exceptional power to complete tough landscaping applications, perfect for all day use.
• 0.9 kW of power – equivalent to a 20cc petrol engine
• Lightweight design at only 3 kg
• Extremely low vibration level
• 2 Speed settings with a variable speed trigger
• Rapid line re-load head
• Cutting head compatible with knife blade
• LED control panel
• IPX4 weather protection
Voltage 60V
Motor type Brushless
Cutting diameter 42 cm
Tool only, supplied with: 1x debris shield, 1x front handle
Line diameter 2.4 / 2.7 mm
Cutting speed 4,500 / 5,500 rpm
Trimmer head type Rapid reload, Bump feed
Line reload length 4 m
Noise level (LWA) 88.77 dB(A)
Weight (without battery) 2.97 kg
Recommended battery and charger: KAC804 (4.0 Ah), KAC810 (11.0 Ah) with Backpack Harness, KAC840 30A charger
K0002 60V 42cm Front motor line trimmer (KC110.9) tool only (excluding battery and charger).
KRESS COMMERCIAL KC150.9 20cm / 8’’ CORDLESS LAWN EDGER
The Kress KC150 straight shaft edger delivers precision with its height-adjustable guide wheel. Boasting power on par with a 30cc petrol engine, it combines variable speed control with a protective debris guard for enhanced safety and efficiency.
• Delivers 1.5kW – equivalent to a 30cc petrol engine
• Rigid drive shaft
• 3 Speed settings with a variable speed trigger
• Easy height adjustment
• Contoured magnesium guard
• LED control panel
• IPX4 weather protection
Voltage 60 V
Motor type Brushless
Blade length
Cutting speed
Noise level (LWA)
20 cm
. 3,000 / 3,600 / 4,200 rpm
. 90.6 dB(A)
Weight (without battery) . . 5.3 kg
K0010 60V 20cm Lawn Edger (KC150.9) tool only (excluding battery and charger).
Tool only, supplied with: 1x front handle
Recommended battery and charger: KAC804 (4.0 Ah), KAC810 (11.0 Ah) with Backpack Harness, KAC840 30A charger
60V LAWN EDGER
60V MULTI-TASK TOOLS, CHAINSAWS
1 KRESS COMMERCIAL 42cm ATTACHMENT-CAPABLE CORDLESS GRASS TRIMMER
The Kress multi-attachment string trimmer delivers excellent versatility with its quick and easy coupling for Multi-task tool attachments*. Powered by a 1.3 kW motor, equivalent to a 25cc petrol engine, it ensures robust performance, pruning, trimming and edging.
• 1.3 kW power, equivalent to a 25cc petrol engine
• Rapid line reload head for quick and easy refills
• 2 pre-set speed settings with a variable speed trigger
• Kress aluminium gearhead
• Built-in LED control panel
• IPX4 weather protection
Voltage 60 V
Motor type Brushless
Cutting diameter 42 cm
Line diameter 2.4 / 2.7 mm
Cutting speed 4500 / 5500 rpm
Trimmer head type Rapid reload, bump feed
Noise level (LWA) 94.0 dB(A)
Weight (w/out battery) 4.3 kg
60V MULTI�TASK TOOL SYSTEM
K0003 60V 42cm Attachment-capable grass trimmer (KC120.9) tool only (excluding battery and charger). *Attachments available separately.
KRESS COMMERCIAL KAC104 POWER HEAD for KC120.9 ATTACHMENTS
Compatible with KC120 system of multi-task attachments. The power head is the core of the multi-tasking tool system, with power of 1.3kW, enabling professionals to tackle various tasks with its attachments.
Compatible attachments:
- KAC105 Grass Trimmer Attachment
- KAC141 Straight Edger Attachment
- KAC200 Hedger Trimmer Attachment
- KAC361 Pole Saw Attachment
- KAC360 Extension Shaft
Voltage 60 V
Motor type Brushless
Output power 1.3 kW
Length 83 cm
Protection level IPX4
Noise level (LWA) 94.0 dB(A)
Weight (without battery) 2.8 kg
Recommended battery and charger: KAC804 (4.0 Ah), KAC810 (11.0 Ah) with backpack harness, KAC840 30A charger
K0004 Power head (KAC104) for KC120.9 attachments, tool only (excluding battery and charger).
Cutting width 42 mm
Length / Weight 98 cm / 1.5 kg
K0005 Grass trimmer attachment (KAC105) for KC120.9.
5
3 4
KRESS COMMERCIAL LAWN EDGER ATTACHMENT
Blade length 20 cm
Length / Weight 9 3 cm / 2.5 kg
K0006 Straight edger attachment (KAC141) for KC120.9.
7 KRESS COMMERCIAL GRASS TRIM ATTACHMENT
KRESS COMMERCIAL HEDGE TRIM ATTACHMENT
Blade / working angle 55 cm / 145°
Length / Weight 154 cm / 2.7 kg
K0007 Hedge trimmer attachment (KAC200) for KC120.9.
KRESS COMMERCIAL POLE SAW ATTACHMENT
Bar length 25 cm
Length / Weight 127 cm / 1.8 kg
K0008 Pole saw attachment (KAC361) for KC120.9.
60V CHAINSAWS
KRESS COMMERCIAL EXTENSION SHAFT
Enhances reach of pole saw and hedge trimmer. Length / Weight 109 cm / 0.8 kg
K0009 Extension shaft attachment (KAC360) for KC120.9.
8 9 KRESS COMMERCIAL KC300.9 40cm/16" CORDLESS CHAINSAW
The Kress Commercial chainsaw combines an impressive 24 m/s chain speed with a robust 2.8 kW power output and sustained torque, ensuring swift and accurate cuts.
• 2.8 kW power, rivals 45cc petrol performance
• 24 m/s chain speed with 0.325 LP saw chain
• Exceptional ergonomics
• Low vibration
• Professional chain tensioning system 40cm bar
Tool only, supplied with : 1x bar, 1x chain, 1x wrench, 1x scabbard
• Inertia chain brake with rapid chain stop
• IPX4 weather protection
Voltage 60 V Motor type Brushless
Bar length 40 cm / 16 inch
Chain type Oregon, 0.325 LP
Chain speed 24 m/s
Oil tank volume 190 ml
Noise level (LWA) 99 dB(A)
Weight (without battery) 3.7 kg
K0014 60V 40cm Cordless chainsaw (KC300.9) tool only (excluding battery and charger).
and charger: KAC804 (4.0 Ah), KAC840 30A charger
KRESS COMMERCIAL KC320.9
35cm/14’’ CORDLESS TOP HANDLE CHAINSAW
The Kress Commercial top-handle Arborist chainsaw delivers the equivalent of a 40 cc petrol chainsaw, ensuring efficient cutting at speeds up to 24 m/s. The .325 LP chain offers precise cuts with reduced kickback.
2.4 kW power, comparable to a 40 cc chainsaw 24 m/s chain speed with a .325 LP pitch saw chain
Low vibration
Ergonomic design
Tooled tension system
• Inertia chain brake with rapid chain stop
• IPX4 weather protection
/ 1.1 mm
2.5 kg (w/out cut equip / battery
K0015 60V 35cm Top handle chainsaw (KC320.9) tool only (excluding battery and charger).
Tool only, supplied with: 1x bar, 1x chain, 1x wrench, 1x scabbard
Recommended battery and charger: KAC800 (4.0 Ah), KAC840 30A charger
KRESS COMMERCIAL KC200.9
63cm/25” CORDLESS HEDGE TRIMMER
Optimized for the demands of professional landscaping, the KC200.9 Kress Commercial 63 cm hedge trimmer offers power on par with petrol models, without the emissions. The 63 cm double-sided cutter bar, equipped with laser-cut blades, ensures a clean, sharp finish even with the most overgrown bushes. Flexibility is key, with the option to use either onboard batteries for quick tasks or backpack batteries for extended use, maximising versatility.
• 38 cm tooth spacing for pruning
• Compatible with CyberPack backpack battery and belt
• Multi-position rear handle
• LED control panel
• IPX4 weather protection
Voltage 60 V
Motor type Brushless
60V HEDGE TRIMMERS
Tool only, supplied with: 1x hand guard, 1x scabbard
Recommended battery and charger:
KA3000 (2.0 Ah), KAC804 (4.0 Ah), KAC810 (11.0 Ah) with Backpack Harness, KAC840 30A charger
KRESS COMMERCIAL KC240.9
55cm/22” SHORT SHAFT
ARTICULATING (145°)
CORDLESS POLE HEDGE TRIMMER
A lightweight pole trimmer with a 1 kW output comparable to a 25 cc petrol trimmer. Refined to deliver precision and power, the Kress KC240 is a reliable tool for mid-size hedges. The 145° articulating cutting head, combined with an elongated reach, gives landscapers exceptional reach and manoeuvrability.
• Delivers 1 kW output, comparable to 25 cc
• 55 cm dual-action laser-cut steel blade
Tool only, supplied with: 1x front handle, 1x cutting blade, 1x rear impact guard
Recommended battery and charger:
KAC804 (4.0 Ah), KAC810 (11.0 Ah) with Backpack Harness, KAC840 30A charger
→ Extends up to 4 metres
• 55 cm shaft 145° articulating cutting head
• Rear impact guard
Ergonomic rubber sleeve
12 KRESS COMMERCIAL KC330.9
25cm/10’’ CORDLESS POLE SAW
The Kress KC330 pole saw establishes a new standard of productivity. Extending up to 4 metres, it rivals the power of professional 2-stroke engines, ensuring no task is out of reach. Equipped with a 2-point adjustment system, it offers superior manoeuvrability, making precise cuts from various angles effortless.
• 1.6 kW power, comparable to 30cc performance
• Telescopic tubes
Tool only, supplied with: 1x bar, 1x chain, 2x wrench, 1x scabbard
Recommended battery and charger: KAC804 (4.0 Ah), KAC840 30A charger
CORDLESS POLE HEDGE TRIMMER
The Kress Commercial long shaft articulating pole hedge trimmer offers the robust output of a 1 kW motor, on par with a traditional 25cc petrol trimmer. The 145° articulating head and a 246 cm shaft deliver versatile cutting angles and reach for complex landscaping tasks
• Delivers 1 kW output – comparable to 25cc
• 55 cm dual-action laser-cut steel blade
246 cm shaft 145° articulating cutting head
Ergonomic rubber sleeve
Intuitive LED control panel
IPX4 weather protection
Voltage
Motor type
Blade length
Tooth spacing
Cutting speed
Noise level (LWA)
Weight (without battery)
• Rear impact guard
Tool only, supplied with: 1x front handle, 1x cutting blade, 1x rear impact guard
Recommended battery and charger: KAC804 (4.0 Ah), KAC810 (11.0 Ah)
K0013 60V 55cm Long shaft (145°) pole hedge trimmer (KC270.9) tool only (excluding battery and charger).
KC270.9
60V BLOWERS, LAWN MOWERS
→ High performance with low noise!
1 KRESS COMMERCIAL KC500.9
35N CORDLESS BACKPACK BLOWER
The KC500 backpack blower establishes a new standard of productivity. Boasting a blowing force of 35 N, it rivals the power of 65 cc 2-stroke engine blower, while operating without the associated fumes, noise, and vibration.
• 35 N maximum force – 65 cc petrol-like performance
• Kress QuietStorm™ technology delivers powerful yet whisper-quiet operation
• Intuitive LED control panel
• 4-speed settings, adjustable throttle, and cruise control
• Adjustable, breathable backpack
• Stainless steel protection tip
• IPX4 weather protection
Voltage 60 V
Motor type Brushless
Maximum air speed 85 m/s
Maximum air volume 1,529 m³/h
Noise level (LWA) 96.2 dB
Weight (without battery) 6.9 kg
K0018 60V 35N Backpack blower (KC500.9) tool only (excluding battery and charger).
Tool only, supplied with: 1x tube, 1x nozzle
Recommended battery and charger: KAC804 (4.0 Ah), KAC810 (11.0 Ah), KAC840 30A charger
2 KRESS COMMERCIAL KC510.9
22N
CORDLESS HANDHELD BLOWER
The Kress Commercial handheld leaf blower combines power with silence, thanks to its QuietStorm™ technology. Boasting a 22N blowing force and speeds up to 175 mph, it efficiently handles large volumes of air.
• 22N maximum force
• Kress QuietStorm™ technology delivers powerful yet whisper-quiet operation
• LED control panel with intuitive IoT features
• 4x speed settings, adjustable throttle and cruise control
• Durable stainless steel tip for enhanced protection
• IPX4 weather protection
Voltage 60 V
Motor type Brushless
Maximum air speed 78 m/s
Maximum air volume 977 m³/h
Noise level (LWA) 96.2 dB
Weight (without battery) 2.6 kg
Tool only, supplied with: 1x tube, 1x nozzle
Recommended battery and charger:
KAC804 4.0 Ah, KAC840 30A charger
3
KV720.9 47cm SELF-PROPELLED CORDLESS LAWN MOWER
K0019 60V 22N Handheld blower (KC510.9) tool only (excluding battery and charger).
60V MOWERS
4 KRESS COMMERCIAL
KRESS COMMERCIAL KC711.9
Powerful Performance: Experience max 11Nm, equivalent to a petrol 190cc engine, thanks to the direct-drive cutting motor, surpassing petrol models in anti-clogging performance.
• 3 kW LiftStream™ airflow maximises bag capacity
• Auto-clutch and differential transmission
• Self-propelled, rear-wheel drive, 0–6.4 km/h
• 3-in-1: mulching, bagging and rear-side discharge
• Intuitive LED control display • IPX4 weather protection
Voltage 60 V
Motor type Brushless
Max. blade torque 11 Nm
Self-propl speed (min–max) 2–6.4 km/h
Cutting width 47 cm
Cutting height 20–80 mm, 2-point, 7 steps
Cutting deck material Steel
Grass bag capacity 70 litres
Noise level (LWA) 95.84 dB
Weight (without battery) 38 kg
Tool only, supplied with: 1x high-lift blade, 1x collection bag, 1x mulch plug
Recommended battery and charger: KAC810 (11.0 Ah), KAC840 30A charger
51cm SELF-PROPELLED CORDLESS MOWER
Walk-behind mower providing high performance during mulching and bagging operations, for challenging jobs such as cutting wet, deep, and dense grass.
• 3 kW LiftStream™ airflow maximises bag capacity
• Auto-clutch and differential transmission
• Self-propelled, rear-wheel drive, 0–6.4 km/h
• 3-in-1: mulching, bagging and rear-side discharge
• Sealed double-bearing, rubber tyre wheels
Tool only, supplied with: 1x high-lift blade, 1x collection bag, 1x mulch plug
Recommended battery and charger: KAC810 (11.0 Ah), KAC840 30A charger
K0021 60V 47cm Cordless self-propelled mower (KV720.9) tool only (excluding battery and charger).
• Intuitive LED control display • IPX4 weather protection 60 V
Motor type
Brushless
Max. blade torque 9.5 Nm
Self-propl speed (min–max) 0–6.4 km/h with soft start
Cutting width 51 cm
Cutting height 25–115 mm, 8 positions
Cutting deck material Reinforced 1.8 mm steel
Grass bag capacity 88 litres easy-empty
Noise level (LWA) 95.3 dB
Weight (without battery) 42 kg
60V 51cm Cordless self-propelled mower (KC711.9) tool only (excluding battery & charger).
→ High power for high productivity
→ Powerful mowing and agile handling
47 cm Cut
51 cm Cut
Offers better weight balance for enhanced comfort and safety.
5 KRESS COMFORTABLE D/SHOULDER HARNESS
Compatible with: KC170.
Designed to cater for people of all sizes K0034 Comfortable harness (KAC132).
ACCESSORIES
GRASS TRIMMER & BRUSH CUTTER ACCESSORIES
Evenly distribute weight during long periods of use.
KRESS TRIMMER SHOULDER STRAP
Harness for KC100, KC110, KC120, KC150, KC151, KC241, KC240, KC270. K0033 Single shoulder strap (KAC130).
9 10 KRESS ‘D’ HANDLE
Compatible with: KC270, KC240, KC241, KC120, KC100. K0038 D Handle (KAC201).
KRESS CHAINSAW BARS
K0044 Kress 14“/35cm 0.043’’/1.1mm .325LP bar (KAC330). Compatible with KC300/KC320.
K0045 Kress 16“/40cm 0.043’’/1.1mm .325LP bar (KAC331). Compatible with KC300/KC310.
7 KRESS MULTI-PURPOSE SAFETY GUARD
Compatible with: KC100, KC120, KC170. Protection from thrown objects. K0036 Safety guard (KAC180).
Slim design provides excellent visibility for accurate trimming.
8 KRESS HIGH-VISIBILITY SAFETY GUARD
Compatible with: KC100, KC120. Protection from thrown objects. K0037 High-visibility guard (KAC183).
CHAINSAW ACCESSORIES
K0039 Kress 14“/35cm 0.043’’/1.1mm .325LP chain loop (KAC300).
K0041 Kress 10“/25cm 0.043’’/1.1mm 3/8LP chain loop (KAC302). Compatible with KC330.
K0042 Kress 12“/30cm 0.043’’/1.1mm .325LP chain loop (KAC303). Compatible with KC320.
15 KRESS 21” HIGH LIFT MOWER BLADE
Compatible with: KC710, KC711. High lift blade for superior bagging performance. K0046 21” High lift mower blade (KAC704). Pack of 6.
KRESS PROTECTIVE COVER for CYBERTANK
Suitable for KAC875E, KAC877E. K0053 Cover for Cybertank (KAC927).
K0043 Kress 12“/30cm 0.043’’/1.1mm 3/8LP chain loop (KAC304). Compatible with KC330.
MOWER ACCESSORIES
KRESS MOWER GRASS COLLECTION BAG
Mower collection bag for KC720. K0051 70 ltr collection bag (KAC731).
16 KRESS 21” MEDIUM LIFT MOWER BLADE
Compatible with: KC710, KC711. Medium lift blade for mulching & bagging. K0047 21” Medium lift mower blade (KAC705). Pack of 6.
KRESS COVER for CYBERPLUG & CYBERLITE For KAC840, KAC844. K0052 Cover for chargers (KAC924).
17
KRESS 21” LOW LIFT MOWER BLADE
Compatible with: KC710, KC711. Low lift blade for sandy regions. K0049 21” Low Lift Mower Blade (KAC707). Pack of 6.
KRESS COVER for SMALL PLANT For trimmer, pole saw, chainsaw, etc. K0056 Cover for small plant (KAC920).
18
KRESS 21” PREMIUM MULCHING BLADE
Compatible with: KC710, KC711. For superior mulching performance.
K0048 21” Premium mulching blade
KRESS RAIN COVER for LAWN MOWER
Suitable for mowers up to 76cm in size. K0057 Rain cover for mowers (KAC921).
ROBOTIC MOWERS
Redefining precision in lawn care with Kress RTKn technology, the MISSION robotic lawn mower range introduces satellite-guided, centimetre-level accuracy without the need for any property-specific stationary antennas.
Mission RTKn
• Centimetre-level accuracy without station antenna
• Satellite-guided – NO perimeter wire installation
• Integrated obstacle avoidance system
• Multi-zone function with the ability to precisely navigate from one turf area to another
• Dead reckoning for mowing even under shade (weak satellite signal)
• Systematic coverage in parallel lines for maximum mowing efficiency
• IPX5-rated water protection
• Auto-levelling cutting disc
• Anti-theft protection
• MAP™ (Mowing Action Plan) for advanced path optimization and dynamic adjustment technology
• Electronic cutting height adjustment
• RBS™ Regenerative Brake System for energy saving
• Equipped with OAS (Obstacle Avoidance System)
ROBOTIC MOWERS
MISSION RTK n ROBOTIC MOWERS
The MISSION MEGA range provides satellite-guided, centimetre-level accuracy without the need for stationary antennas. Engineered for expansive landscapes, the mowers manicure areas with a perfect stripe finish. Equipped with dual-layer razor sharp blades and obstacle avoidance system, each mower operates efficiently under any conditions. MAP™ (Mowing Action Plan) and TeamWork™ collaborative technologies provide seamless management of every turf complexity.
Mission Mega RTKn
• Centimetre-level accuracy without station antenna
• Satellite-guided – NO perimeter wire installation
• Dual-layer razor-sharp blades for overgrown grass
• Integrated obstacle avoidance system
• Multi-zone function with the ability to precisely navigate from one turf area to another
• Dead reckoning for mowing even under shade (weak satellite signal)
• Systematic coverage in parallel lines for efficiency
• Auto-levelling cutting disc
• Anti-theft protection
• MAP™ (Mowing Action Plan) for advanced path optimization and dynamic adjustment technology
• Electronic cutting height adjustment
• RBS™ Regenerative Brake System for energy saving
• In-Hub drive motor with all terrain wheels
• Equipped with OAS (Obstacle Avoidance System)
1 KRESS MISSION BLADES
Compatible with All Mission models. The hardened stainless steel replacement blades for the Mission robotic mower offer extended life, improved performance, and reduced corrosion.
K0068 Long life blades. Pack of 6 blades and screws (KA0002).
2 KRESS MISSION MAGNETIC STRIP KIT
Compatible with All Mission models. A 30m magnetic strip customizable for ‘No-Go’ zones.
Kit contains: 6x 5m magnetic strips, 40x Pegs, 12x Connectors.
K0069 30m magnetic strip kit (KA0240).
3 KRESS MISSION WHEEL BRUSH KIT
Compatible with Mission RTK n . Remove grass clippings from the lawn mower wheels to maintain their climbing ability and skid resistance.
Kit contains: 2x wheels fenders, 6x brushes, 1x Hex key.
K0071 Wheel brush kit (KA0172).
4
KRESS MISSION MEGA WHEEL BRUSH KIT
Compatible with: Mission Mega RTK n Remove grass clippings from the lawn mower wheels to maintain their climbing ability and skid resistance.
Kit contains: 2x wheels fenders, 6x brushes, 1x Hex key.
K0072 Wheel brush kit (KA0172).
HOW IT WORKS
