Spaldings Agriculture Apr-May 2021 Offers

April–May 2021

IN SI D E:

SPECIAL OFFERS

SPRAY NOZZLES

Call: 01522 507600

FIX

Kit includes: 58 rubber plugs, special cement & 3 x repair tools c/w carry case.

PUNCTURES IN LESS THAN 10 MINS

NEW

WELDERS

HEAVY DUTY AXLE STANDS FOR FARM USE

Closed / Open height: 180mm (7") / 960mm (373⁄4").

HIGH

→ MORE

PUNCTURE PREVENTION & REPAIR OVERLEAF

Heavy duty workshop trolley jack with long reach – well suited to farm applications.

LIFT

SAVE

8

TONNE

UP TO

28%

Tubeless Tyre Repair Kit Permanently seals puncture channel in the tyre tread area of slow moving vehicles – less than 38mph.

16 Tonne Heavy Duty Axle Stands • Height range: 415mm – 710mm • 3 stage pin fixing, 22kg per pair.

10004

07841

£65.00

€75.40 (normally £105.35)

£130.00

€150.80 (normally £182.38)

16

TONNE capacity per pair

8 Tonne Compac (8T-HC) High-Lift Trolley Jack 40501

£840.00

€974.40 (normally £1,069.00)

→ 5 TONNE TROLLEY JACK ALSO AVAILABLE – CALL

NB. Always read the instruction manual before using Trolley Jacks. All Spaldings hydraulic equipment is fully CE marked and supplied with a 12 month guarantee.

SPRING SAVINGS on LEADING REPLACEMENT PARTS… SAVE

POWER HARROW TINES

40%

To fit: AMAZONE – KE303/403 (18mm thick)

To fit: KUHN – F/Fit 2 (16mm thick)

SINGLE HOLE TINE 00894 R.H. (as OEM: 954426).

00895 L.H. (as OEM: 954427). £6.99 €8.11 (normally £11.71 each)

CULTIVATION PARTS

EASY FIT TINE 12518 R.H. (as OEM: K2500100).

12519 L.H. (as OEM: K2500090). £7.20 €8.35 (normally £10.61 each)

CALL TODAY AND

SUBSOIL PARTS

HARD-FACED underside

To fit: RECO / MASCHIO – (15mm thick)

DM EASY FIT TINE 02396 R.H. (as OEM: 36100366).

02397 L.H. (as OEM: 36100367). £6.43 €7.46 (normally £9.97 each)

SAVE

46%

To fit: OPICO HE-VA – 25mm fitting

To fit: LEMKEN – Karat

ASSURED

UP TO

SAVE

11356 80mm Point, (as OEM: 3374441). £16.34 €18.95 (normally £26.63 each)

Q UA L IT Y

UP TO

12927 H/Duty point & 4" wing assembly (as OEM: 645000044). £48.25 €55.97 (normally £73.48 each)

To fit: SUMO – Trio Post 2007

12931 H/Duty point, shin & wing bracket assembly (as OEM: SW352). £28.22 €32.74 (normally £53.11 each)

Spaldings parts are designed and manufactured for Spaldings to exacting quality standards and are supplied to fit machines indicated and are not sold as genuine parts.

NEW SEASON PRICES

on our wide range of DUTCH OPENERS to fit SUMO DTS and HORSCH www.spaldings.co.uk — create an account for easy online ordering

For SEED & FERTILISER applications

All prices are NETT and apply until 31st May 2021. VAT @ 20% (UK rate) is extra.

AG-Camp-04-AprilMAy21-A4-4pp.indd 1

16/03/2021 14:46

• Manufactured from top quality raw materials • Suitable for use with all balers and wrappers • Minimum roll length guaranteed

BENEFIT FROM quality bale products available with LOW MINIMUM ORDER VALUES and FREE DIRECT DELIVERY*

WRAP

NETWRAP

TWINE

NETTEX � xxID

BaleCORD � Maxxcord

SilaCORD

Premium baler twine for big square balers, round and conventional balers.

Co-extruded 25 micron multi-layer film to guarantee high puncture resistance.

Available in 500 or 750mm roll widths.

Quality netwrap, fully reinforced with complete side to side coverage for all makes of round baler.

SIDE TO SIDE COVER

CALL TODAY FOR A

GREAT DEAL

*Benefit from the flexibility to select any mix of Cordex netwrap, baler twine or silage wrap to create your nett minimum order value of £500, excluding VAT – with FREE Mainland UK delivery only. (Not available in Ireland, with the exception of Netexx Netwrap products which are available as full pallets only).

READY TO MOW? – CALL FOR A GREAT PRICE ON REPLACEMENT PARTS… SPREADER & LOADER PARTS

TEDDER PARTS

BALER PARTS

SPALDINGS

QUALITY

ASSURED

PARTS VALUE PACKS OF

25

SILAGE MOWER BLADES Length: 115mm Hole: 19mm dia.

Length: 107mm Hole: 18mm dia.

To fit CLAAS – Disco Mower 14803 Mower blade R.H. (Pack of 25).

14802 Mower blade L.H. (Pack of 25). £20.07 €23.28 (normally £46.36 per pack)

To fit KUHN – FC Series Mower 02065 Mower blade R.H. (Pack of 25).

02066 Mower blade L.H. (Pack of 25). £15.00 €17.40 (normally £30.85 per pack)

Farmguard® No.1 Sealant

Farmguard® solution soaks into the surface of concrete, block and brick work, drying to leave the substrate totally sealed, toughened and impact resistant. (NOT suitable for use on asphalt, tarmac or coarse concrete block work).

04947 Farmguard No.1 (5 litre). £51.00 (normally £75.12 per can)

IDEAL FOR SILAGE CLAMPS

Due to HEALTH & SAFETY reasons Farmguard no.1 will be supplied to MAINLAND UK only. Not available in Ireland.

Spaldings parts are designed and manufactured for Spaldings to exacting quality standards and are supplied to fit machines indicated and are not sold as genuine parts.

easy

ONLINE ORDERING!

10% OFF

YOUR FIRST ONLINE ORDER* Set up your Spaldings website LOGIN credentials and SAVE 10% on your first online order!

VISIT

www.spaldings.co.uk/request-a-web-login to get your discount code today!

*TERMS & CONDITIONS APPLY: Discount code will be sent via email with your login credentials. One time use only. 10% discount can only be applied to orders placed online, it cannot be redeemed by phone

or account representative. Discount is available on all products under £2500. Discount is not applicable to products already on offer or on clearance. Excludes existing buying group and fixed price members.

AG-Camp-04-AprilMAy21-A4-4pp.indd 2

16/03/2021 14:46

FAST AND SAFE WHEEL REMOVAL

CAPABLE OF LIFTING ALL WHEEL TYPES

1.5 Tonne Mk2 Hydraulic Wheel Changer Lifting capacity . . . . 1500 kg Max wheel diameter . 1800mm Min wheel diameter . 1000mm Max wheel width . . . . 1200mm 28173 £550.00 €638.00 (normally £807.25)

ONLY:

28173 WHEELCHANGER

£550 .00 €638.00 each

EFFORTLESS REMOVAL & FITTING OF ALL AGRICULTURAL & INDUSTRIAL TYRES!

INNER TUBE REPAIR

COMBINED PATCH/PLUG REPAIR KIT

for punctures in the tread of all types of radial and cross-ply tubeless tyres.

PU N CT U RE RE PA IR :

SAVE SA UP TO

43%

FOR TUBELESS TYRES

240

Professional Inner Tube Repair Kit 05097

ASSORTED PATCHES

£87.00

Economy Inner Tube Repair Kit 10005

€100.92 (normally £154.64)

32

ASSORTED PATCHES

£40.00

€46.40 (normally £61.13)

Multi-purpose Tubeless Tyre Repair Kit 18139

£175.00

Includes: 40 patch/plugs in 2 sizes plus cement & 2 x mill cutters.

€203.00 (normally £247.46)

PUNCTURE REPAIR & PREVENTION! TyreGuard

VOLUME DISCOUNT THATS ONLY:

BUY 12 FOR £96.00

£8each .00

1

LITRE BOTTLES

1 Litre Tyre Guard Heavy Duty Puncture Sealant c/w introduction valve 04955

£9.00

(normally £11.95 each)

Can only be introduced when tyre is deflated.

25 Litres

TyreGuard Heavy Duty Puncture Sealant Tyre Guard remains active for the life of the tyre – ready to permanently seal punctures over and over again.

• Will seal holes up to 7mm dia. in the tread area; that’s larger than a 6" nail!

04956 25 litres (use with pump 04953).

£82.50 (normally £122.52)

TyreGuard Introduction Pump Required to transfer Tyre Guard from 25 litre container into the tyre.

04953 £53.00 (normally £77.50 each)

Due to HEALTH & SAFETY reasons Tyreguard sealant will be supplied to MAINLAND UK only. Not available in Ireland.

SAVE TIME PREVENT PUNCTURES!

SAVE UP TO

32%

Call from Ireland: 1800 255455 — from the UK: 01522 507600 AG-Camp-04-AprilMAy21-A4-4pp.indd 3

16/03/2021 14:46

NEW RANGE

WIDE RANGE OF GYS ACESSORIES ALSO AVAILABLE FROM STOCK!

MIG / ARC MULTI-PROCESS WELDERS GYS MULTIPEARL 210-2 (single phase) 200A Inverter / MIG Welder

GYS MULTIWELD 320T (3 phase) 320A MIG / ARC Welder

The MULTIWELD 320T is a semi automatic 3-phase welding machine, combining MIG/ MAG, cored wire and MMA welding processes.

Its intuitive interface integrates digital displays for easy and precise adjustment. Fitted with a powerful and precise 4 drive roller feeding system, with optional rollers for Ø 1.2mm wire also available.

MULTI-PROCESS • MIG/MAG welding: - steel wire: Ø 0.6–1.2 mm - stainless steel wire: Ø 0.8–1.2 mm - aluminium wire: Ø 0.8 and 1.0 mm - cored wire (reverse polarity): Ø 1.9–1.2 mm • MMA welding: - basic and rutile electrodes (up to Ø 6mm).

• OPTIMISED MIG/MAG SETTINGS - Choice of the trigger mode: 2T or 4T. - Welding guide: tables assist the user to adjust and fine tune the voltage and the diameter of the filler wire according to the thickness of the material being welded.

• INTEGRATED WIRE FEEDER - Compatible with reels: 5kg / 15kg.

- With 4 rollers for an efficient wire feeding.

17195 MULTIWELD 320T (3 phase) MIG/ARC welder c/w 4m MIG torch (MB36).

17196 300A Electrode holder with 4m cable (for 17195).

3-in-1, the MULTIPEARL 210-2, is a multi-process power source capable of performing MIG/MAG, TIG DC and MMA welding with high precision.

It features 9 welding synergies to enable welding in all positions. Versatile, but also equipped with a single-phase power supply with PFC/FV technology, it is the perfect tool in the workshop or on site.

NEW Approval . . . . . . . . CE to EN 60974-1.

Supply . . . . . . . . . . 3 phase 400 volts (+/-15%).

Fuse rating. . . . . . . 16 amps.

Welding range. . . . 40–320 amps.

Duty cycle (MIG) . . 60% @ 240 amps.

Welding wire size . 0.6–1.2 mm.

Reel size Ø . . . . . . . 200mm (5kg), 300mm (15kg).

Dimensions . . . . . . L770 x W470 x H790mm.

Weight . . . . . . . . . . 44kg.

17145 GYS 3-Phase 350A MIG Promig 400-4S.

ALSO AVAILABLE FROM STOCK:

17140 GYS Single Phase 250A MIG Monogys 250-4CS.

Compact & versatile multi-process precision welder

3 WELDING PROCESSES: • MIG-MAG - 2 roller motor: 5kg and 15kg reels - Adjustable manually or synergistically - SPOT and DELAY functions available - Can weld sheets from 0.6–6mm thick • TIG NEW - TIG DC welding and TIG Lift ignition with optional TIG EURO torch - Adjustable post gas & downslope (arc downslope) • MMA Approval . . . . . . . . CE to EN 60974-1.

- Welds different types of coated electrodes up to Supply . . . . . . . . . . Single phase ø5mm (rutile, basic, stainless steel, steel, cast iron) 230 volts (+/-15%).

- Adjustable Hot Start (0 to100%): facilitates Fuse rating. . . . . . . 16 amps. ignition and can be adjusted Welding range. . . . 20–200 amps.

- Arc Force adjustable (0 to100%): regulates Duty cycle (MIG) . . 60% at 130 amps. the arc length deviations Welding wire size . 0.6–0.8mm.

- Anti-sticking: reduces the risks of electrode stick Reel size . . . . . . . . . 1kg and 5kg.

• MIG-MAG SYNERGIES Dimensions . . . . . . L450 x W250 Automatic calculation of wire speed and voltage x H350mm. according to: Weight . . . . . . . . . . 16kg.

- type and dia. of wire - thickness to be welded - gas used - welding position.

• Manual setting possible: wire speed and arc length 17190 MULTIPEARL 210-2 (single phase) multi-process welder c/w electrode holder and 3m MIG torch (MB25).

GYS – HIGH PERFORMANCE CUTTERS AND WELDERS PLASMA CUTTERS

ARC WELDERS

GYS EASYCUT 40 Plasma Cutter (Single-phase, 40 Amp)

Ultra compact (just 8 kg), the EASYCUT 40 is a plasma cutter with a HF-free starting voltage, perfect for cutting all types of metal up to 20mm thick. With a power output of 40A, it excels in precision cutting at low intensity. Ideal for use in the workshop or car bodyshop, the EASYCUT 40 is portable and high performance.

• Inverter technology guarantees quality cutting on all types of steels (soft, stainless, hardened, HLE), aluminium, copper, etc.

• Quick and easy installation of consumables • Intuitive controls with automatic torch detection • Manual setting of the air pressure (2.5 < 6.5 bars) using front panel • HF-free ignition to prevent disturbances that could interfere with nearby electronic equipment • Protection against overvoltage and overcurrent • Indication of insufficient air pressure or torch detection • IP 21 protection rated • Compact, lightweight and portable 17130 Easycut 40 plasma (single phase) c/w 4m TPT40 torch.

ALSO AVAILABLE FROM STOCK:

GYSMI 200P Arc Welding Inverter – 200 Amp DC

NEW

Efficient and simple to use!

Approval . . . . . . . . CE to EN 60974-1.

Max severance cut 20mm.

Max. clean cut . . . . 15mm.

Duty cycle . . . . . . . 20% at 40 amps (40°C).

Output current . . . 10–40 amps.

Supply . . . . . . . . . . Single phase 230 volts.

Fuse rating. . . . . . . 32 amps.

Dimensions . . . . . . L420 x W150 x H300mm.

Weight . . . . . . . . . . 8kg.

17120 GYS 3-Phase 70 amp cutter GYS Cutter 70 CT.

17131 Cutting Kit for Plasma torch Compass Kit.

Portable and compact 200 amp arc welding inverter, weighing just 5kg.

Features revolutionary arc dynamic, can be used with all types of electrodes: rutile, basic, stainless steel, cast iron in direct current. TIG capable (scratch start).

• MMA Features: - Immediate start thanks to its very high no-load voltage - Constant welding power – Very smooth NEW melting due to the direct current - Not sensitive to supply current fluctuations or to the arc length - Very good penetration and perfect arc stability Approval . . . . . . . . CE to EN 60974-1.

- Suitable for use with voltage stable output Supply . . . . . . . . . . Single phase generators (min. 7.5Kva) 230 volts (±15%).

• HOT START: Increased power at start Fuse rating. . . . . . . 16 amps.

• ANTI-STICKING: Prevents the electrode sticking Welding range. . . . 60% duty cycle • ARC FORCE: Instantaneous increase of the current at 120 amps. in difficult welding situations Welding current . . 10–200 amps.

17855 200 amp arc welding inverter (GYSMI 200P) c/w electrode holder, earth clamp with 1.6m cables and plastic carry case.

ALSO AVAILABLE FROM STOCK:

17916 GYS 160 amp Arc Welder GYSMI E163.

Dimensions . . . . . . L270 x W140 x H180mm.

Weight . . . . . . . . . . 5.0kg.

17110 GYS TIG Torch c/w valve GYS SR17 Torch.

Call from Ireland: 1800 255455 — from the UK: 01522 507600 AG-Camp-04-AprilMAy21-A4-4pp.indd 4

16/03/2021 14:46

NEW RANGE NOZZLES • Improved coverage • Increased chemical efficiency • Increased disease control

Award winning, internationally renowned and industry leading range of air induction nozzles. Manufactured in Britain; these precision-made LERAP 3 star rated nozzles are suitable for most sprayers including VLV, HV applications and knapsacks. Ten nozzle variations are available with application rates ranging from 20–905 litres per hectare.

BFS Billericay Air Bubble Jet Nozzles

• LERAP 3★ Rating • Up to 75% Drift Reduction 19350 Yellow 0.2mm

LEADING AIR INDUCTION NOZZLES

(NNB003002). Single.

19351 Lilac 0.25mm

(NNB003000). Single.

19353 Red/Brown 0.35mm

(NNB002992). Single.

19352 Blue 0.3mm

(NNB003003). Single.

19354 Red 0.4mm

(NNB003004). Single.

19356 Grey 0.6mm

(NNB003006). Single.

19355 Brown 0.5mm 19357 White 0.8mm

(NNB003005). Single.

(NNB003008). Single.

BFS Standard 8mm Caps

NEW

Standard 8mm nozzle caps supplied with washer.

19370 Yellow standard cap

(NCA000002). Single.

19371 Lilac standard cap

(NCA000000). Single.

19373 Red/Brown std. cap

(NCA002992). Single.

19375 Brown standard ca

(NCA000005). Single.

19372 Blue standard cap

(NCA000003). Single.

19374 Red standard cap

(NCA000004). Single.

19376 Grey standard cap

(NCA000006). Single.

19377 White standard cap 19378 Black standard cap

(NCA000008). Single.

(NCA000010). Single.

18823 Sealing washer. Pack of 10.

Offers the operator the benefit of angling the spray 30°, forwards or backwards along the spray boom whilst using their existing 8mm air induction or flat fan nozzles.

Supplied with seal, Angled caps eliminate the need to purchase expensive replacement nozzles.

BFS 30° Angled Caps • Improved spray performance 19360 Yellow angled cap 19361 Lilac angled cap

(NCF000120). Single.

(NCF000125). Single.

19362 Blue angled cap

(NCF000130). Single.

19364 Red angled cap

(NCF000140). Single.

19366 Grey angled cap

(NCF000160). Single.

19363 Red/Brown angled cap (NCF000135). Single.

19365 Brown angled cap

(NCF000150). Single.

19367 White angled cap

(NCF000180). Single.

19368 Replacement seal

(NCF000101). Single.

19359 Black angled cap

(NCF000100). Single.

BFS – NOZZLES FOR ACCURATE SPRAY APPLICATION LIQUID FERTILISER APPLICATION

NEW

Hook – use stabiliser band (19386) to ensure alignment with neighbouring dribble bar

Autostreamer– No leaving the cab, no flow dials to rotate or slide.

BFS Dribble Bar II for liquid fertiliser

BFS AutoStreamer for liquid fertiliser

• For use with flow based controllers

The Dribble Bar II accurately applies liquid fertiliser through four equally spaced openings along the boom.

The application rates can be pre-set to one of 11 different flow-rates by just a simple finger-tip adjustment of the flow dial. Rates can be simply altered in the field without removing the dribble bars from the boom. � Accurate: Allows precision targeting of liquid fertiliser and eradicates application overlap. � Effective: Provides an efficient and flexible method of application. Ensures liquid fertiliser can be applied under a wide range of climatic and ground conditions. � Economic: Offers increased speed and reduces waste. � Safe: Removes risk of drift contamination, run-off to ditches and hedgerows and minimises crop scorch.

Provides true variable rate liquid fertiliser application The AutoStreamer applies accurate amounts of liquid fertiliser through its unique auto-quad-valve system and four spaced openings along the bar. The flow rate of the AutoStreamer works in partnership with the in-cab rate controller and can easily be changed from within the cab. � Precision: Ensures the accurate placement of liquid fertilisers and avoids application overlap. � Efficient: Allows liquid fertilisers to be applied under a range of conditions and right up to field boundaries. � Economic: Less waste, increased speed of application and better utilisation of labour and machinery. � Protection: Removes risk of drift contamination, runoff to ditches and hedgerows minimises crop scorch.

19385 Dribble Bar II (NFB200401).

Fitting type: TeeJet/EF3/Euro.

19387 AutoStreamer (NFB500001).

Fitting type: TeeJet/EF3/Euro.

19386 Stabilizer band for Dribble Bar II (NCF200412).

19388 Stabilizer band for Autostreamer (NFB300004).

Slips over the hook on the Dribble Bar to keep them in line.

Slips over the hook on the AutoStreamer to keep them in line.

5 Star Plus – Variable rate liquid fertiliser nozzle

A new version of the 5 Star Variable Rate Fertiliser Nozzle to apply higher volumes of product per hectare. One nozzle will cover the output of three fixed output nozzles.

At 12 kph speed and 2.5 bar pressure, you could now achieve 368 litres/hectare for a 30N application.

Optimum boom height is 700mm and fits all standard quick-fit nozzle bodies.

• For use with flow based controllers 19390 5 Star Plus nozzle (NFB400104). Single.

Call from Ireland: 1800 255455 — from the UK: 01522 507600 AG-Camp-04-AprilMAy21-A4-4pp.indd 5

16/03/2021 14:46

SAVE

AIR BRAKE KIT LAYOUT

ARE YOU LEGAL?

UP TO

29%

Trailers exceeding 20mph are required to achieve 45% minimum braking efåficiency and must be fitted with a dual line system incorporating a fail safe

12/24v Flexi Pole Super Bright Halogen Amber Beacon Approval . . . .ECE 65, ECE R10.

Patterns . . . . .Single flash pattern (160 fpm).

Requires DIN A pole mount.

TRAILER MAINTENANCE

AIR BRAKE CONVERSION KIT

23112

€730.80 (normally £944.75)

ALL

COLOURS:

£

HEAVY DUTY

HIGH QUALITY PAINT

45.00

25

(normally £67.78)

Due to HEALTH & SAFETY reasons paint products will be supplied to MAINLAND UK only. Not available in Ireland.

07829

PTO GUARDS

SAVE UP TO

32%

DESCRIPTION

TO FIT YOKES

STANDARD BARE-CO GUARDS

€37.12 (normally £47.68)

CLOSED LENGTH

MAX OPEN LENGTH

18201 With ratchet & HOOK ends. £16.50 €19.14 (normally £26.15) 18202 With ratchet & DELTA ends. £17.00 €19.72 (normally £32.55)

SAVE UP TO

47%

BARE-CO PTO GUARDS

Unique fitting method reduces time & makes access easy for servicing etc.

• Safe – Patented & fully CE marked, • Universal – will fit over 95% of PTO shafts

OFFER PRICE

BARE-Co

76 –126mm wide

1100mm

1600mm

Standard

76 –126mm wide

1500mm

2500mm

18736

Standard

76 –126mm wide

2000mm

3400mm

£79.00 €91.64 was £116.37

£83.50 €96.86 was £120.24

£91.00 €105.56 was £133.29

Wide-angled guard will fit Walterscheid wide angled joints – fitted to around 97% of UK machines!

18739

Wide-angle

76 –126mm wide

1100mm

1600mm

Wide-angle

76 –126mm wide

1500mm

2500mm

18741

Wide-angle

76 –126mm wide

2000mm

3400mm

18740

15m x 50mm Heavy Duty Nylon Load Binders

– SAFETY FIRST!

Standard

WIDE-ANGLE BARE-CO GUARDS

TONNE RATED TO ISO 5692

£32.00

18734

18735

Secure loading!

Manufactured from drop forged high-tensile steel

Heavy Duty Weld-On Trailer Eye

SPALD. PROD.

€19.72 (normally £24.22)

£630.00

5 Litre HARD ENAMEL

O N LY :

£17.00

HEAVY DUTY 50mm wide load binders to BS EN 12195 with a 4 tonne minimum break strength.

Agricultural Trailer Air Brake Conversion Kit Complete two-line air braking system for tandem axle sprung trailers with cam brakes.

• Ensures greater braking control with progressive application • Contains every component required for a complete installation along with detailed instructions and handbook 19558

HIGH INTENSITY HALOGEN BEACON

£148.00 €171.68 was £217.06

£166.00 €192.56 was £244.57

PTO ASSEMBLY BARE-Co 3036 Wide-Angle PTO Shaft ASSEMBLY (1400mm long) 1⅜" 6-spline Q/R (trac) x 13⁄4" 20-spline pinch bolt (impl).

Rated 106hp @ 540 rpm / 170hp @ 1,000 rpm.

Torque rating: 3,880Nm. Shear bolt: M12. → WIDE RANGE OF ASSEMBLIES AVAILABLE – 19657 CALL! €655.40 (normally £832.00)

£565.00

With shear bolt limiter and BARE-Co guard

£161.00 €186.76 was £232.51

NB. NOT compatible with Walterscheid models S35,S6, S6H with extended bearing groove shoulder.

Also available to fit Bondioli series 6, 7 & 8 World and SFT series. Please ask for details.

facebook.com/spaldings.ltd • twitter.com/spaldings

Ireland Free fone: Free fax: Email: Web:

1800 255455 1800 804018 info@spaldings.ie www.spaldings.ie

UK Call: Free fax: Email: Web:

01522 507600 0800 4715075 agsales@spaldings.co.uk www.spaldings.co.uk

* Orders over £99 delivered FREE, with same day despatch on all stock items, (orders before 4pm, mainland UK). Orders below £99 will carry a package and postal charge.

Spaldings parts are designed and manufactured for Spaldings to exacting quality standards and are supplied to fit machines indicated and are not sold as genuine parts.

All prices are NETT and apply until 31st May 2021. VAT @ 20% (UK rate) is extra. Spaldings reserve the right to change specifications without prior notice.

AG-Camp-04-AprilMAy21-A4-4pp.indd 6

16/03/2021 14:47