Page 1

Polymer Dashing Render

Above: Wombwell BISF Houses, Barnsley Barnsley MBC Left: Bishop Auckland Hospital Percy Thomas Partnership

M.R. S7 Polymer Dashing Render A premium, one-coat polymer cement dashing render, available in nine standard colours, complemented by a wide choice of aggregates dash finishes. A high performance alternative to traditional sand and cement for use where a traditional, low maintenance finish is required. Suitable for use in render only applications or as part of an external wall insulation system.

Applications • Suitable for single coat application to most substrates • It is good practice to apply over M.R. S3 base coat on brick and blockwork • Compatible with Alumasc’s Swisslab and Swisspan external wall insulation systems

Performance • BBA approved, fully warranted system with 30 year

life expectancy

• Manufactured to ISO9001:2000 and ISO14001:2004

Quality and Environmental Management standards

• Fully weather resistant whilst remaining vapour

Technical expertise and tailored project support

• An increased bond strength when compared to sand and cement

• Resistant to cracking and crazing • Highly resistant to impact damage • Non-flammable when cured • Class 0 surface spread of flame

93/2914

97/3410

• Installation, Aftercare & Warranties

Application by Alumasc approved contractors, routine maintenance requirements, full package of warranty options

Project specific elevational colour schemes, CAD drawings and product samples

• Specification Support

00/3766

Design & Specification Support Thermal calculations, condensation risk analysis, wind loading calculations (for high rise projects)

• Design & Specification Support

06/4297

Maes Mabon, Mid Glamorgan Caerphilly CBC

permeable

• Durable and lightweight

Haley/Range/Ackroyd Courts, Halifax Pennine Housing 2000

Detailed specification (to NBS format), health and safety sheets and product data sheets

93/2895

April 2008

ALUMASC EXTERIOR BUILDING PRODUCTS LTD White House Works, Bold Road, Sutton, St Helens, Merseyside, WA9 4JG, United Kingdom Telephone: +44 (0)1744 648400 Facsimile: +44 (0)1744 648401 Email: info@alumasc-exteriors.co.uk Web: www.alumascfacades.co.uk


Polymer Dashing Render Typical System Components 3 6

1

Solid Blockwork Substrate

2

Pack Size

25 kg bag

Powder Coated, Galvanised or Stainless Steel Beading

Mixing Ratio

5- 5.6 litres of clean cold water per bag

3

Scrim Adhesive (used as a reinforcing layer)

Coverage

Up to 2.5m² per bag (based on 8mm thickness)

4

Alkali-resistant Glassfibre Scrim (bedded into M.R. Scrim Adhesive)

4

Render Coverage

1

5

2

5

6

Colours and Textures

Coverage rates stated are for guidance only and depend on background substrate and consistency of mix. Contractors should always

M.R. S7 Polymer Dashing Render (available in a range of colours)

verify the coverage rate according to the specific characteristics of each individual project and product.

Aggregate Dash (available in a range ofcolours)

M.R. S7 Dashing Render in 9 standard colours

White

Grey

Pink

Cream

Yellow

Russet

Peach

Red

Brown

Aggregate Dash 15 standard dash finishes

Arcane on Peach

Polar White on White

Buff Quartz on Cream

Permwhite Calcine on White

Hazel on Brown

Derbyshire Spar on Cream

Fawley Gravel on Yellow

Harvest on Cream

Luxovite on Yellow

Red and White on Extra White

Black and White on White

Champagne on Cream

Durite Canterbury Spar on Pink

Ledmore Marble on Grey

Westbere on Grey

April 2008

ALUMASC EXTERIOR BUILDING PRODUCTS LTD White House Works, Bold Road, Sutton, St Helens, Merseyside, WA9 4JG, United Kingdom Telephone: +44 (0)1744 648400 Facsimile: +44 (0)1744 648401 Email: info@alumasc-exteriors.co.uk Web: www.alumascfacades.co.uk

systsumm_polymerdashingrender  

http://www.alumascfacades.co.uk/media/199195/systsumm_polymerdashingrender.pdf

Read more
Read more
Similar to
Popular now
Just for you