LSL CLUBMAN
LSL CLUBMAN eMARK
LSL GONIA
Aluminium, round, Ø 88mm, with E-mark, for left and right side. Mounting kit LSL165SW or LSL166SW necessary.
Aluminium, round, Ø 100mm, with E-mark, for left and right side. Mounting kit LSL165SW or LSL166SW necessary.
Aluminium, square head, 117x66mm, without E-mark, for left and right side. Mounting kit LSL165SW or LSL166SW necessary.
matt black
matt black
black anodised
LSL002SW
€ 50,38
LSL003SW
€ 67,18
LSL001SW
€ 58,78
e
MOUNTING INSTRUCTION HANDLEBAR END MIRRORS
COVER
for Vespa ET/LX/LXV/S: To mount these mirrors open ended handlebar grips will be required. Otherwise you have to cut a hole in the existing grips. As handlebar end weights are not fitted as standard, the following modifications are necessary:
VERSION I
VERSION II
A M6 thread has to be cut into closed ended handlebars. Then you can use the mounting kit (part no MV502952 / MV502953).
Use the weights (part no MV161030 / MV161031) that open ended handlebars are equipped with to mount the mirror.
for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L: This model is already equipped with an open ended handlebar. Use the internal thread of the handlebar to fasten the mounting bush of the mirror.
Cover for mirror hole chrome, 2 pieces black, 2 pieces
MOUNTING KIT Mounting kit for handlebar end mirrors silver silver black
VERSION I
VERSION II
If you want to mount the mirrors without handlebar end weights (weight compensation by mirror), use the mounting kit part no MV502952 / MV502953.
For mounting the mirrors with standard handlebar end weights, use kit part no MV502950.
0 0 0 0 6 8
40093100 € 6,64 40093110 € 6,64
MV502950 € 4,96 MV502952 € 5,80 MV502953 € 5,80
THE HOT WIRE TO ALL PART: SIP ORDERING HOTLINE 0049 8191 9699969