Reverse osmosis - spare parts solenoid valves sensors catalog

INDEX Carbonators ........................................................................................................................................................... 3 Solenoid valves ..................................................................................................................................................... 5 Flow Restrictors .................................................................................................................................................... 9 Gauges ................................................................................................................................................................. 11 Engine vane pumps ............................................................................................................................................. 12 Vane pumps ......................................................................................................................................................... 13 Booster pumps .................................................................................................................................................... 15 Pressure switches ............................................................................................................................................... 18 Sensors ................................................................................................................................................................ 21 Accumulator tanks .............................................................................................................................................. 23 Anti leaking systems ........................................................................................................................................... 27 Plugs switches cables ........................................................................................................................................ 28 Water purity testers ............................................................................................................................................. 30 Shut-Off valves .................................................................................................................................................... 39

Carbonators Code: 060072

Fitting for inlet water carbonator 1/4" F. - 5/16" Q.F.

Code: 060073

Fitting for inlet Co2 carbonator 1/4" F. - 5/16" Q.F.

Code: 060074

304 SS water carbonator 1,2lt. 5/16" OD stem with fittings 1/4"F.

This product is planned for the production of sparkling water using exclusively carbon dioxide up to the maximum pressure of 7 bar with potable water.

Technical features: - Level control with one probe - Ground Faston - Two single check valves on inlet water - Two single check valves on inlet co2 Gas - Water inlet thread 1/4” gas - Gas inlet thread 1/4” gas - Output probe fitting connection 8mm(5/16”)

27 July 2018

3/40

- Bottom drain with cap - Max. operating pressure = 7bar(101psi) - Bursting pressure = 80bar(1.160psi) - Safety valve relief pressure = 8,5bar(123psi) - Max. volume = 1,2lt.

- Min. volume = 0,9lt.

- Carbonator max. capacity = 3lt./min 11bar(159psi) h2o, pump 300lt./h., 4bar(58psi) Co2.

Code: 060079

316 SS water carbonator from 0,250lt. to 1,27lt. 1/8" F.

Features Misures Ø x H - 0,250lt.(mm): Misures Ø x H - 0,510lt.(mm): Misures Ø x H - 0,760lt.(mm): Misures Ø x H - 1,020lt.(mm): Misures Ø x H - 1,270lt.(mm):

90x100 90x140 90x180 90x220 90x260

Variants Code

Description

060079-001 060079-002 060079-003 060079-004 060079-005 060079-010 060079-011 060079-012 060079-013 060079-014

316 SS water carbonator from 0,250lt. - vertical 316 SS water carbonator from 0,510lt. - vertical 316 SS water carbonator from 0,760lt. - vertical 316 SS water carbonator from 1,020lt. - vertical 316 SS water carbonator from 1,270lt. - vertical 316 SS water carbonator from 0,250lt. - horizontal 316 SS water carbonator from 0,510lt. - horizontal 316 SS water carbonator from 0,760lt. - horizontal 316 SS water carbonator from 1,020lt. - horizontal 316 SS water carbonator from 1,270lt. - horizontal

Technical features: - Level control with double probe - Made of stainless steel AISI 316 - Antibacterial silver welds - Horizontal or vertical functioning - Both internal and external pickling (metal) - Water inlet thread 1/8” gas - Water outlet thread 1/8” gas - Gas inlet thread 1/8” gas - Max. operating pressure = 8,5 bar (123 psi) - Bursting pressure = > 20 bar (290 psi) - Carbonator max. capacity = 2lt./min 12bar(732psi) h2o, pump 300lt./h., 4bar(58psi) Co2.

Pickling is a metal surface treatment used to remove impurities, such as stains, inorganic contaminants, rust or scale from ferrous metals, copper, precious metals and aluminum alloys. A solution called pickle liquor, which contains strong acids, is used to remove the surface impurities. It is commonly used to descale or clean steel in various steelmaking processes.

NOTA BENE: The use of a control valve is recommended for the installation of a tube for sparkling water bigger than

27 July 2018

4/40

4mm or 5/32''.

In this mode the sparkling water will not have a metal taste.

Solenoid valves Code: 060001

Auto-Flushing Valve 24VDC 1/4" NPT - 400 ML

Code: 060002

Solenoid valve 24VDC female 1/4" FTP w/filtering mesh

Code: 060004

Floating Valve , Mechanical Style , Tube 1/4"

27 July 2018

5/40

Code: 060005

Floating, Micro-Switch, 10 Ampere

Code: 060008

Solenoid valve at one way 220V-AC / 24V-DC / 24V-AC

Variants Code

Description

060008-01 060008-02 060008-03

Solenoid valve at one way Voltage 220-AC Solenoid valve at one way Voltage 24V-DC Solenoid valve at one way Voltage 24V-AC

1-way solenoide valve with body in food grade resin membrane in platinic silicone 3/4" X 1/4" Flow rate: 2,5 Lt/Min - 2,5 bar Nominal pressure: 10 bar Code: 060091

One way solenoid valve 230V thread 3/4" M. - quick fit 8MM with bracket

One way solenoid valve 230V N.C. thread 3/4" M. - quick fit 8MM with bracket

27 July 2018

6/40

Code: 060077

One way flowmeter solenoid valve 220V~240V - 50/60Hz 6VA

Features Ambient temperature: Temperature of fluid: Operating pressure: Flow rate: Minimum flow of signal presence: Minimum flow of flow rate measure: Accuracy of the flow measure: Hall sensor power supply: Resistance to Bursting: Life:

2 °C ÷ 60 °C 2 °C ÷ 70 °C 0.02 ÷ 1 MPa (0.2 ÷ 10 bar) According to the mounted regulator (2.5 to 8 l/min) 0.6 l/min According to the flow regulator used According to the flow rate (+/-4.5% to +/-8%) 3.8 – 24 Vdc > 6 MPa ( > 60 bar ) a 25°C 50.000 cycles - 200.000 total litres

Variants Code

Description

060077-01 060077-03 060077-02

One way flowmeter solenoid valve 220V~240V - 50/60Hz 6VA (100) Flowmeter solenoid cable One way flowmeter solenoid valve bracket

Servo-assisted solenoid valve for water with integrated flow sensor. This valve is typically used on household appliances connected to the hydraulic network. A flow sensor, capable of measuring the volume of delivered water, and a flow limiter, capable of limiting the value of the water flow rate, as a function of inlet pressure, are integrated to the valve. The flow sensor is constituted by an impeller immersed in the water flow. The impeller rotation cause the ferrite magnets to rotate in front of a hall effect sensor. The obtained signal is a square wave with the pulse frequency proportional to the flow of water.

Features: * Water inlet with 3/4 inch BSP thread for EU applications and 3/4 inch GH for U.S. applications. * Water output with connection for rubber hoses - 10/12 mm. * Coil electrical connections with 6.3x0.8mm terminals and rast connectors 2.5 (IP00). * Electrical connections of the flow sensor of type rast 2.5. * The sensor is protected by double insulation, and therefore is suitable for use even on applications that are not equipped with safety transformers SELV. Code: 060038

3 ways solenoid valve 1/8" F. 230V - 50Hz - TA:80°C - P:0/18bar

27 July 2018

7/40

Normally Closed (NC).

Code: 060011

Solenoid valve 24V-DC / 24V-AC 1/4" FPT

Variants Code

Description

060011-01 060011-02

Solenoid valve 24V-DC / 24V-AC 1/4" FPT Solenoid valve 24V-AC 1/4" FPT

Normally closed.

Code: 060009

Solenoid valve at one way 220V quick fitting 1/4''

1-way solenoide valve with body in food grade resin membrane in platinic silicone 3/4" X 1/4" quick fitting.

Flow rate: 2,5 Lt/Min - 2,5 bar Nominal pressure: 10 bar Voltage: 220V - AC Code: 060010

Solenoid valve at 2 ways 220V-AC

27 July 2018

8/40

2-ways solenoide valve with body in food grade resin membrane in platinic silicone 3/4" x 1/4" Voltage: 220V - AC Code: 060007

Solenoide valve 3 entrances - 1 OutPut 220V / 24V

Variants Code

Description

060007-01 060007-02

Solenoide valve 3 entrances - 1 OutPut Voltage 220V-AC Solenoide valve 3 entrances - 1 OutPut Voltage 24V-DC

3-ways solenoide valve, with body in food grade resin and membrane in platinic silicone 3/4" x 1/4".

Flow rate: 6,7 Lt/Min - 3,5 bar Nominal pressure: 10 bar Voltage: 220V - AC Voltage: 24V - DC

Flow Restrictors Code: 060034

Flow Restrictor, Female 1/4'' 300cc, 400cc , 550cc , 600, 800cc

Variants Code

Description

060034-01 060034-02 060034-03 060034-05

Flow Restrictor, Female 1/4'' 300cc (LAST PIECES) Flow Restrictor, Female 1/4'' 400cc (LAST PIECES) Flow Restrictor, Female 1/4'' 550cc (LAST PIECES) Flow Restrictor, Female 1/4'' 800cc

27 July 2018

9/40

Code: 060035

Flow Restrictor, Female or Quick Fit 1/4", 300cc, 350cc, 400cc, 420cc, 550cc

Variants Code

Description

060035-01 060035-02 060035-03 060035-04 060035-05 060035-07 060035-08 060035-09 060035-10 060035-11

Flow Restrictor, Female 1/4" 300cc Flow Restrictor, Female 1/4" 350cc Flow Restrictor, Female 1/4" 400cc Flow Restrictor, Female 1/4" 420cc Flow Restrictor, Female 1/4" 550cc Flow Restrictor, Quick fit 1/4" 300cc Flow Restrictor, Quick fit 1/4" 350cc Flow Restrictor, Quick fit 1/4" 400cc Flow Restrictor, Quick fit 1/4" 420cc Flow Restrictor, Quick fit 1/4" 550cc

Code: 060036

Flow Restrictor, Female quick fitting 1/4'' 800cc, 520cc, 420cc

Variants Code

Description

060036-01 060036-02 060036-03

Flow Restrictor, Female quick fitting 1/4'' 420cc (LAST PIECES) Flow Restrictor, Female quick fitting 1/4'' 520cc (LAST PIECES) Flow Restrictor, Female quick fitting 1/4'' 800cc

27 July 2018

10/40

Code: 060037

Flow Restrictor, Female quick fitting 1/4'' 300ml, 420ml, 550ml

Variants Code

Description

060037-01 060037-02 060037-03

Flow Restrictor, Female quick fitting 1/4'' 300ml (LAST PIECES) Flow Restrictor, Female quick fitting 1/4'' 420ml (LAST PIECES) Flow Restrictor, Female quick fitting 1/4'' 550ml (LAST PIECES)

Gauges Code: 060040

Glycerin pressure gauge for board installation 1/8" (Ø 4cm)

Pressure: 0 - 10 bar Code: 060075

Dry pressure gauge for board installation 1/8" (Ø 40mm)

Dry plastic case DN40 Rear connection for panel mount with screwed flange.

Pressure: 0-16bar(0-230psi) Materials

27 July 2018

11/40

Case: Black plastic Dashboard flange: Chromed plastic Trasparent: Clear plastic Quadrant: White plastic Index: Black plastic Fitting: Brass side hexagon 14mm Manometer: Bourdon copper alloy spring, solder alloy of tin, c. spring Movement: Patent brass/polyester Technical features Reference regulations: EN 837-1 Working pressure: Static: 75% of full scale value Floating: 60% of full scale value For short periods: up to full scale value Temperature limits: Environment: -20 ... +60°C Fluid: +60°C max Storage: -20 ... +60 °C Temperature drift: ±0,04%/1K compared to (+20°C) Accuracy class: cl. 2.5, cl. 1.6 on request Level of protection: IP 43 per EN 60 529/IEC 529

Engine vane pumps Code: 060059

Engine water cooled rotary pump for reverse osmosis 180W.

Code: 060060

Air fan cooled rotary pump engine for reverse osmosis 180W.

Air cooled 180W engine for reverse osmosis rotary pump. Capacitor included. * Specifications: 230VAC - 1,65AMP (7µF)

27 July 2018

12/40

* Frequency: 50Hz * Power: 180W * Motor Rotation: 1400 RPM Code: 060084

Air cooled rotary pump engine for reverse osmosis 180W.

Air cooled 180W engine for reverse osmosis rotary pump. Capacitor included. * Specifications: 230VAC - 1,65AMP (7ÂľF) * Frequency: 50Hz * Power: 180W * Motor Rotation: 1400 RPM

Vane pumps Code: 060041

Fluid o Tech Brass vane pumps for revers osmosis 200-300-400-600-800-1000 lt/h

Variants Code

Description

060041-01 060041-02 060041-03 060041-04 060041-05 060041-06 060041-07 060041-08 060041-09 060041-10 060041-11 060041-12

PA204 Fluid o Tech Brass vane pumps 200 lt/h with by-pass (12) PA200 Fluid o Tech Brass vane pumps 200 lt/h without by-pass (12) PA304 Fluid o Tech Brass vane pumps 300 lt/h with by-pass (12) PA300 Fluid o Tech Brass vane pumps 300 lt/h without by-pass (12) PA404 Fluid o Tech Brass vane pumps 400 lt/h with by-pass (12) PA400 Fluid o Tech Brass vane pumps 400 lt/h without by-pass (12) PA601 Fluid o Tech Brass vane pumps 600 lt/h with by-pass (6) PA600 Fluid o Tech Brass vane pumps 600 lt/h without by-pass (6) PA801 Fluid o Tech Brass vane pumps 800 lt/h with by-pass (6) PA800 Fluid o Tech Brass vane pumps 800 lt/h without by-pass (6) PA1001 Fluid o Tech Brass vane pumps 1.000 lt/h with by-pass (6) PA1000 Fluid o Tech Brass vane pumps 1.000 lt/h without by-pass (6)<br />

The rotary vane pumps, manufactured by Fluid-o-Tech and sold worldwide under the trademark Rotoflow, are volumetric pumps designed for pumping water and moderate aggressive liquids with low flow at high pressure.

27 July 2018

13/40

Technical features and manufacturing characteristics The rotary vane pump is brass made with a stainless steel AISI 303 rotor, while the pumping chamber and the vanes are in carbon graphite.

The inlet and outlet ports are 3/8" GAS or NPT threaded.

The pumps are designed to be directly mounted to the motor with a stainless steel clamp.

For different mounting arrangements see our technical info “optional mountings”.

Maximum operative temperature: 70 °C (158 °F).

Available upon request: - Viton®/EPDM seals (suffix - V/E) - built-in relief valve - built-in 70 mesh filter - flange mount Main applications - Beverage vending machines - Post-mix drink dispensers - Espresso coffee machines - Cooling systems - Reverse osmosis - Ultra-filtration - Water dispensers Code: 060042

Fluid o Tech AISI 303 stainless steel vane pumps for reverse osmosis 300-400-600-800-1000 lt/h

Variants Code

Description

060042-01 060042-02 060042-03 060042-04 060042-05 060042-06 060042-07

PA310 Fluid o Tech 303 stainless steel vane pumps 300 lt/h with out by-pass (12) PA311 Fluid o Tech 303 stainless steel vane pumps 300 lt/h with by-pass (12) PA410 Fluid o Tech 303 stainless steel vane pumps - 400 lt/h with out by-pass (12) PA411 Fluid o Tech 303 stainless steel vane pumps - 400 lt/h con by-pass (12) PA610 Fluid o Tech 303 stainless steel vane pumps - 600 lt/h senza by-pass (6) PA810 Fluid o Tech 303 stainless steel vane pumps - 800 lt/h with out by-pass (6) PA1010 Fluid o Tech 303 stainless steel vane pumps - 1.000 lt/h with out by-pass (6)

The rotary vane pumps, manufactured by Fluid-o-Tech and sold worldwide under the trademark Rotoflow, are volumetric pumps designed for pumping water and aggressive liquids with low flow at high pressure.

Technical features and manufacturing characteristics The housing and the rotor are in stainless steel AISI 303, while the pumping chamber and the vanes are in graphitic carbon.

Inlet and outlet ports are 3/8" GAS or NPT threaded.

A built-in adjustable bypass to protect the pump and the system from unexpected pressure spikes is also available upon request.

The pump can be connected to direct coupling motors with a stainless steel clamp or to M71 and M80 UNELMEC or NEMA 56C frame motors with the Fluid-o-Tech coupling and adapter set.

Maximum operative temperature: 70 °C (158 °F).

27 July 2018

14/40

Available upon request: * Viton®/EPDM seals (suffix - V/E) Main applications * Soda circulation in post-mix drink dispensers * Cooling systems * Reverse osmosis * Ultra-filtration * Booster systems

Booster pumps Code: 060043

Booster pump UP-7000/24VDC 220VAC/50Hz

Features Size: Weight: Voltage: Rotation speed rate: Power Hertz: Temperature Rating: Voltage Insulating Test: Power consumption: Max. outlet pressure: Working pressure: Flow rate @ 80 psi:

173x102x103 (mm) 2kg 24 / 36 / 48 VCD 550~600rpm 50 / 60 Hz 10°C ~ 45°C 0.8 KV / 3 second (under 0.6 mA) 24W 36W 48W 120psi 80psi 0.65 lpm / 1.24 lpm / 2.0 lpm

Variants Code

Description

060043-01 060043-02 060043-03 060043-04

Booster pump UP-7000/24VDC 220VAC/50Hz w/transformer Booster pump UP-7000/24 24VDC without transformer Transformer 220V/24VDC 1.2A internal connection to the UP-7000 Pump head for UP-7000

Code: 060044

Booster pump UP-8000/24, 36, 48 VDC 220VAC/50Hz

Features

27 July 2018

15/40

Size UP-8000: Size UP-8000W: Weight UP-8000: Weight UP-8000W: Voltage UP-8000: Voltage UP-8000W: Rotation speed rate UP-8000: Rotation speed rate UP-8000W: Power Hertz UP-8000: Power Hertz UP-8000W: Operation Temperature UP-8000: Operation Temperature UP-8000W: Voltage Insulating Test UP-8000: Voltage Insulating Test UP-8000W: Power consumption UP-8000: Power consumption UP-8000W: Max. outlet pressure UP-8000: Max. outlet pressure UP-8000W: Working pressure UP-8000: Working pressure UP-8000W: Flow rate @ 80 psi UP-8000: Flow rate @ 80 psi UP-8000W:

196x102x103 (mm) 196x102x105 (mm) 2,3kg 2,3kg 24 / 36 / 48 VCD 24 / 36 / 48 VCD 1500rpm 50 rpm 1800rpm 50 rpm 50 / 60 Hz 50 / 60 Hz 10 °C~45 °C 10 °C~45 °C 0.8 KV / 3 second (under 0.6 mA) 0.8 KV / 3 second (under 0.6 mA) 57W 77W 90W 57W 77W 90W 120psi 120psi 80psi 80psi 1.9 lpm / 2.4 lpm / 3.1 lpm 1.9 lpm / 2.4 lpm / 3.1 lpm

Variants Code

Description

060044-03 060044-04 060044-06 060044-07 060044-08 060044-09 060044-10 060044-11

Booster pump UP-8000/36VDC w/o transformer Booster pump UP-8000W/24 DC24V w/o trasformer water cooling ring Transformer 220V/36VDC 2A for code 060044-03<br /> Pump head for UP-8000 Transformer 220V/24VDC 4A. for code 060044-04 Booster pump UP-8000/48VDC 220VAC/50Hz with transformer Booster pump UP-8000/48VDC 220VAC/50Hz w/o transformer Transformer 220V/48VDC 2A for code 060044-09/10

* MOTOR: 36VDC * INPUT: 220VAC/50Hz * OUTPUT: DC36V/2A * FLOW RATE: 3LPM Code: 060055

Booster pump UP-8500W water cooling 220VAC/50-60Hz

Features Size: Weight: Voltage: Rotation speed rate: Power Hertz: Temperature Rating: Voltage Insulating Test: Power consumption: Max. outlet pressure: Working pressure:

27 July 2018

170x119x110 (mm) 2,3kg 220 VCD 2100rpm 50 rpm 50 / 60 Hz 10°C ~ 45°C 0.8 KV / 3 second (under 0.6 mA) 90W 120psi 80psi

16/40

Flow rate @ 80 psi:

3,9 lpm

Variants Code

Description

060055-01 060055-02 060055-03 060055-04

Booster pump UP-8500W water cooling 220VAC/50-60Hz with P.C.B control box Booster pump UP-8500W water cooling 220VAC/50-60Hz with-out P.C.B control box Booster pump UP-8500W 220VAC/50-60Hz P.C.B control box UP-8500W replacement pump head

* Top quality brushless pump for commercial RO system ( 150 - 300 GPD) and quiet operation. * Longer lifespan and more durable performance. * One hundred thousand recyling test under 0 to 150 psi. * Self-priming ability : 3 meters. * Cooling ring patent design maintains a cool operating temperature of the pump, effectively extending the lifespan of the pump head. * P.C.B control box included.

Code: 060066

Booster pump PSP220 220V (8)

Variants Code

Description

060066-01 060066-02 060066-03

PSP220 Booster pump 220V (8) PSP220 replacement pump head PSP220 Couple of carbon brush

220 volt PSP Booster Pump Without transformer. 28 cm. cable for terminal box connection. * Max pressure: 70psi * Specifications: 230VAC - 0,8AMP * Flow rate: 5,2lt./min. * Connections: 3/8" NPTF * Pump head: In grivory also suitable for carbonation/soda systems water.

Code: 060087

Aquatec CDP 5800 220V. booster pump

Features Power supply: Flow rate:

27 July 2018

220/230V - 50/60Hz 1,26 gpm (4,8L/min)

17/40

Ampere: Bypass: Power consumption: Max. inlet pressure: Max. outlet pressure:

0,58 A @ 130psi (9bar) 9bar - 130psi 110W < 4bar 11bar - 160psi

Variants Code

Description

060087-01 060087-02 060087-03

Aquatec CDP 5800 220V. booster pump - 3/8" FTP (6) Aquatec CDP 5800 220V. booster pump - 5/16" quick-fit (6) Aquatec CDP 5800 220V. booster pump - 3/8" quick-fit (6)

Pressure switches Code: 060025

Low Pressure Switch 1/4'' female

Code: 060096

CX250 replacement Hight pressure switch OD stem fit. 1/4" 3bar - diff. 1bar

Code: 060026

Low Pressure Switch 1/4'' female

27 July 2018

18/40

Code: 060097

High Pressure Switch (20-40 psi) with double o-ring, Type 1/4'' quick fitting

Code: 060098

High Pressure Switch (20-40 psi), Type 1/4'' quick fitting

Code: 060027

High Pressure Switch (15-30 psi) (20-40 psi) 1/4'' female

Variants Code

Description

060027-01 060027-02

High Pressure Switch (15-30 psi) 1/4'' female High Pressure Switch (20-40 psi) 1/4'' female

15 - 30 psi (1 psi = 0.07 bar) adjustable high-pressure pressure, switch for equipment with pump.

20 - 40 psi (1 psi = 0.07 bar) adjustable high-pressure pressure, switch for equipment with pump.

27 July 2018

19/40

Code: 060028

High Pressure Switch (20-40 psi) , Male Type 1/4'' Jaco

15 - 30 psi (1 psi = 0.07 bar) adjustable high-pressure switch for equipment with out pump.

Code: 060029

High Pressure Switch (20-40 psi) , Male Type 1/4'' Jaco

Code: 060030

High Pressure Switch (20-40 psi) , Type 1/4'' quick fitting

Code: 060071

High Pressure Switch (20-40 psi) , Type 1/4'' OD stem

27 July 2018

20/40

Code: 060076

High Pressure Switch (29-72,52 psi/2-5 bar) 1/4'' - 10A.

Factory Calibration: 36,26 psi (2,5 bar)

Sensors Code: 060023

Single TDS Sensor Probes

* Stainless steel sensor * Probe: 1/4" * Cable: 45" (114,30 cm.) * Connector: Single 4-pin * Thermometer pin: Yes * Sensors have a green wrap and no label * Pressure Rating: 16bar @ +23°C Code: 060024

In-line flow sensor

The FS-2000(H) flow sensor comes with a reed switch or Hall effect switch which delivers a switch signal or digital signal to electronic control unit when it is activated by the magnetic force of the flow sensor turbine. It

27 July 2018

21/40

can detect water flow from 1.7 to 14.1 L /min.

The connection of the FS-2000(H) is 3/ 8â&#x20AC;? NPT female.

Its body and turbine are made of acetal copolymer (POM) material.

The best location to connect the FS-2000(H) is on the outlet channel of the filter.

Because it's sensitive to rust and dirt. It could be installed at vertical or horizontal position.

For most of residential water filters and coolers, the FS-2000(H) is an ideal flow measurement and control solution for filter life or water dispensation monitor , it detects precisely, works reliable and is most affordable. The FS-2000(H) is compatible with the PWA 608M , the electronic flow monitor control board and the PWA608T, the electronic flow totalizer control board.

Switching Voltage : Max. 200 Volts Switching Current : Max. 0.5 Amps Carry Current : Max. 1.5 Amps Switching Frequency : Max. 500 Hz Contact Resistance : Max. 150 mO Life Expectancy : 1 x 108 Ops Mounting Method: Horizontal to Vertical Flowing Direction: Bi-Direction Flow Rate: Maximum 3.72 gpm, 14.1 lpm (vertical and horizontal mounting) Minimum 0.40 gpm, 1.50 lpm (horizontal mounting) Minimum 0.26 gpm, 1.00 lpm (vertical mounting) Calibration: 0.00106 gallon, 0.004 liter per pulse 0.00088 gallon, 0.0033 liter per pulse (vertical mounting) Connection: 3/8 inch NPT Female Temperature: 0 to 40? (32 to 104 ?)

Pressure: Max. 6.0 bar (85 psi) Weight: 50g (1.92 oz.)

Accuracy: +/- 10% Materials: Sensor Body : Acetal Copolymer, TICONA M90 Turbine: Acetal Copolymer, TICONA M90 Stick of Turbine: #304 Stainless Steel O-Ring: E.P.D.M. Code: 060057

TDS Sensor Probes for the RT-770, RT-790 (LAST PIECES)

For models: 060014 * 06015

27 July 2018

22/40

Accumulator tanks Code: 060045

Pressurised accumulator tanks in steel painted white 1,8 Gal.6,8 lt. (1)

Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2.

Preloading pressure 0.5 kg/cm2.

Diameter: 210mm.

Height: 340mm.

Code: 060061

Pressurised accumulator tanks in steel painted blue 2,1 Gal.- 8 lt. (1)

Inner membrane: butyl * Inner covering: Polypropylene liner * Max. work pressure 7 kg/cm2. * Preloading pressure 0.5 kg/cm2. * Diameter: 202mm. * Height: 260mm. * Connection 1/4" Code: 060047

Pressurised accumulator tanks in steel painted white 2,2 Gal.8,3 lt. (1)

Inner membrane: butyl Inner covering: Polypropylene liner

27 July 2018

23/40

Max. work pressure 7 kg/cm2.

Preloading pressure 0.5 kg/cm2.

Diameter: 230mm.

Height: 360mm.

Code: 060063

Pressurised accumulator tanks in steel plastic covering 3 Gal.11,3 lt. (1)

Code: 060046

Pressurised accumulator tanks in steel and stainless steel 3,2 Gal.- 12,1 lt. (1)

Variants Code

Description

060046-S 060046-SS

Pressurised accumulator tanks in steel white painted 3,2 Gal.- 12,1 lt. (1) Pressurised accumulator tanks in stainless steel 3,2 Gal.- 12,1 lt. (1)

Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2.

Preloading pressure 0.5 kg/cm2.

Material: Steel Diameter: 275mm.

Height: 340mm.

27 July 2018

24/40

Code: 060062

Pressurised accumulator tanks in steel painted white 3,2 Gal.12,1 lt. (1)

Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2.

Preloading pressure 0.5 kg/cm2.

Material: Steel Diameter: 270mm.

Height: 340mm.

Code: 060086

Pressurised accumulator tanks in steel plastic covering 4 Gal.15,1 lt. (1)

Inner membrane: food-grade butyl diaphragm Inner covering: food-grade polypropylene liner Max. work pressure :100psi (7kg/cm2.)

Precharge pressure: 7psi (0.5kg/cm2.)

Diameter: 274mm.

Height: 385mm.

Code: 060048

Pressurised accumulator tanks in steel plastic covering 5,5 Gal.- 21 lt. (1)

27 July 2018

25/40

Inner membrane: butyl Inner covering: Polypropylene liner Max. work pressure 7 kg/cm2.

Preloading pressure 0.5 kg/cm2.

Diameter: 280mm.

Height: 410mm.

Code: 060050

Pressurised accumulator tanks in steel painted blue 10,7 Gal.40,6 lt., 14,4 Gal. - 54,5 lt. (1)

Variants Code

Description

060050-01 060050-02

Pressurised accumulator tanks in steel painted blue 10,7 Gal.- 40,6 lt. (1) Pressurised accumulator tanks in steel painted blue 14,4 Gal. - 54,5 lt. (1)

060050-01 10,7 Gal.- 40,6 lt * Diameter: 390mm. * Height: 500mm. * Connection: 1"F. or open/close ball valve with compression fitting *060050-02 14,4 Gal. - 54,5 lt. * Diameter: 390mm. * Height: 580mm. * Connection: 3/4"F. Code: 060051

Accumulator tanks in steel 20 Gal.- 76 lt.

Diameter: 400mm. Height: 730mm. Connection: 3/4"M.

27 July 2018

26/40

Code: 060052

1/4” F – 1/4” M plastic square

Anti leaking systems Code: 060006

Anti leak water (sensor + electronic board)

Variants Code

Description

060006-01 060006-36

Replacement Anti leak sensor 24, 36V. Anti leak water (sensor + electronic board) 36V.

System to stop the water in-let.

Sensor dipped in gold Electronic dedicated PCB Electrovalve Mod. 4030-ID00637 not included Voltage: 24V or 36V Code: 060053

Leaking sensor's PCB w/wiring complete set

27 July 2018

27/40

Set: electronic card + box + aquastop sensor

Plugs switches cables Code: 060068

IEC tripolar built-in plug switch without fuse

Panel hole size (LxH): 47x28mm.

Code: 060069

IEC tripolar built-in plug bright switch without fuse

Panel hole size (LxH): 47x28mm.

Code: 060089

IEC tripolar built-in plug switch with fuse

27 July 2018

28/40

Code: 060090

IEC tripolar built-in plug bright switch with fuse

Code: 04704721

Fast fuse 250V - 5x20mm - 16A.

Code: 060070

IEC power supply cable - schuko EU plug

Variants Code

Description

060070-01 060070-02 060070-03 060070-04

IEC power supply cable - schuko EU plug White (LAST PIECES) IEC power supply cable - schuko EU plug Black (LAST PIECES) EU power supply cable Female IEC 90째 plug - 90째 schuko EU plug White EU power supply cable Female IEC 90째 plug - 90째 schuko EU plug Black

Cable: 2mt. (3x0,75mm.)

27 July 2018

29/40

Code: 060088

IEC power supply cable - L type plug (Italian 3-plug)

Variants Code

Description

060088-01

EU power supply cable Female IEC 90° plug - Italian 3-plug L type Black

Cable: 2mt. (3x0,75mm.)

Water purity testers Code: 060013

Electrolysis system for reverse osmosis test

Variants Code

Description

060013-01 060013-04 060013-05

Electrolysis 220 V. Aluminium electrode replacement for 060013-02 Iron electrode replacement for 060013-02

Code: 060014

RT-770 In-Line TDS Tester

27 July 2018

30/40

Variants Code

Description

060014-01 060014-02 060014-03 060014-04 060014-05 060014-06 060014-07 060014-08

RT-770 In-Line TDS Tester AA batteries x 2 - 40ppm.

RT-770 In-Line TDS Tester AA batteries x 2 - 80ppm.

RT-770 In-Line TDS Tester AA batteries x 2- 100ppm.

RT-770 In-Line TDS Tester AA batteries x 2- 150ppm.

RT-770 In-Line TDS Tester 12-24V DC power connection - 40ppm.

RT-770 In-Line TDS Tester 12-24V DC power connection - 80ppm.

RT-770 In-Line TDS Tester 12-24V DC power connection - 100ppm.

RT-770 In-Line TDS Tester 12-24V DC power connection - 150ppm.<br />

The RT-770 is an in-line and low cost testing device to monitor the quality of pure water which is generated

by Reverse Osmosis water filters. It measures the conductivity of water and convert it to be TDS reading.

The measured TDS reading is compared to the pre-setting TDS value.

The RT-770 turns on RED light if the measured TDS reading is over the pre-setting TDS value. If it’s under the pre-setting TDS value, the RT-770 turns on Green light.

Alert options available: 40ppm - 80ppm - 100ppm - 150ppm.

Features: One push-button testing Internal battery power or external power Easy connected to most of reverse osmosis water filters Operating guide 1-Cut off the outlet tube(between tank of the reverse osmosis water filter and faucet).

2-Insert the tube into the quick fitting.

The probe needs to be cleaned every year to avoid scaling which may result into inaccuracy testing.

Specification : Dimension : 70mm(L) x 55m(W) x 33mm(D) Weight : 80 g Cable length : 45 cm.

Operating : 3000 operating times Power : AA batteries x 2 or 3 – 24V DC Code: 060015

RT-790, In-Line Programmable Automatic TDS Tester

The RT-790 is an in-line and low cost testing device to monitor the quality of pure water which is generated by reverse osmosis water filters. It measures the conductivity of water and convert it to be TDS reading.

The measured TDS reading is compared to the pre-setting TDS value. The RT-790 turns on RED light if the measured TDS reading is over the pre-setting TDS value. If it’s under the pre-setting TDS value, the RT-790 turns on Green light.

Feature : * Automatic testing or manual testing * Internal battery power

27 July 2018

31/40

* Easy connected to most of reverse osmosis water filters Connecting Fitting Cut off the outlet tube (between tank of the reverse osmosis water filter and faucet). Insert the tube into the quick fitting Operating Automatic testing: a)Testing per hour. b)If testing resistance value is bigger than setting resistance value, it isn’t displayed on LCD. c)If testing resistance value is smaller than setting resistance value, it will be recorded. After five times record, it will enter into warning status and stop testing.

Manual testing: a)Press the button for testing. b)If testing resistance value is bigger than setting resistance value, the blue light will flash five times and enter into automatic testing model. c)If testing resistance value is smaller than setting resistance value, after red light flashing and alarm warning five times, it will enter into warning status and stop testing.

5.4 Reset Use stick to keep pressing the “RESET” button for 4 seconds or reset the batteries.

The probe needs to be cleaned every year to avoid scaling which may result into inaccuracy testing.

Specification : * Dimension : 70mm(L) x 55m(W) x 33mm(D) * Weight : 80g. * Cable length : 45 cm. * Operating : 3000 operating times * Power : AA batteries x 2 * Operating current : 1 mA@3V DC Code: 060016

Quick Check TDS/Conductivity Monitor

Press the "Push-to-Check" button for an instant water quality check!

FEATURES * With the push of a button, the unit displays a green or red light, indicating good water quality or service required, respectively. * Tests for TDS or conductivity levels. * Eight programmable set points (by dip switch). * Bright LED lights. * Simple to use. * Factory Calibrated to 100 ppm NaCl. Re-calibration is unncessary. * Comes equipped with Mur-lok® Quick-Connect T-fitting (1/4 inch standard, also available in 3/8" or 1/2" ). * Excellent Reverse Osmosis (RO) or Deionization (DI) monitor. * Installs quickly and easily.

27 July 2018

32/40

SPECIFICATIONS TDS/EC Range: 0-5000 ppm (10,000 µS) Max. Set Point: 50 ppm (100 µS) Accuracy: ±3% ATC: No Cable Length: 24.5" (including sensor) Fittings: 1/4" Power source: 4 x 1.5V button cell batteries (included) Battery life: Approx. one year Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)

Code: 060017

Quick Check TDS LCD Monitor

Ideal for any water filtration system, including reverse osmosis systems, coolers and much more.

FEATURES * Displays TDS level of a single water line. * Highly efficient and accurate due to its advanced microprocessor technology. * Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. * Wide Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) * Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. * Comes equipped with Mur-lok® Quick-Connect T-fitting (1/4 inch standard, also available in 3/8" or 1/2" ). * Installs quickly and easily.

SPECIFICATIONS Range: 0-9990 ppm Accuracy: ±2% Conversion Factor: NaCl (avg. 0.5) Cable Length: 24.5" (including sensor) Fittings: 1/4" standard, also available with 3/8" or 1/2" Power source: 2 x 1.5V button cell batteries (included) Battery life: approx. 1000 hours of continuous use Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)

27 July 2018

33/40

Code: 060018

DM-1 In-Line Dual TDS Monitor

Measure the tap water coming in vs. the purified water going out of your water filtration system at any time.

FEATURES * Displays TDS levels of the feed water and product water with in & out electrode probes. * Highly efficient and accurate due to its advanced microprocessor technology. * Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. * Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) * Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. * Comes equipped with Mur-lokÂŽ Quick-Connect T-fittings. * Installs quickly and easily.

SPECIFICATIONS Range: 0-9990 ppm Accuracy: Âą2% Conversion Factor: NaCl (avg. 0.5) Cable Length: 24.5" (including sensor) Fittings: 1/4" standard, also available with 3/8" or 1/2" Power source: 2 x 1.5V button cell batteries (included) Battery life: approx. 1000 hours of continuous use Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)

Code: 060019

Dual TDS Sensor Probes for the DM-1

* Stainless steel sensors * Probe: 1/4" * Cable: 24.5" * Connector: 8-pin * Thermometer pins: Yes * Each sensor of the pair has a blue or red wrap and labeled "IN" or "OUT"

27 July 2018

34/40

* Pressure Rating: 16bar @ +23°C Code: 060020

DM-2 Commercial/residential in-Line Dual TDS Monitor

Install on industrial systems such as car washes, window washing, manufacturing, and food processing.

FEATURES * Highly efficient and accurate due to its advanced microprocessor technology. * Displays TDS levels of the Feed Water and Product Water with in & out electrode probes. * Auto-Off function conserves battery power. The unit shuts off automatically after 20 seconds. * Dual Range - Measures from 0-999 ppm, with a resolution of 1 ppm. From 1000 to 9990 ppm, the resolution is in 10 ppm increments, indicated by a blinking 'x10' image. * Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. * Comes equipped with 1/4 inch Mur-lok® Quick-Connect T-fittings. Also available with 3/8" or 1/2" fittings. * Installs quickly and easily.

Differences from the DM-1: * Designed for commercial/industrial applications. * Stronger, water-resistant casing. * Calibration can be done individually or simultaneously on each line. * Improved design, including an extra large, easy-to-read LCD display. * Longer, waterproof, shielded cables. * Variable mounting bracket.

SPECIFICATIONS Range: 0-9990 ppm Accuracy: ±2% Conversion Factor: NaCl (avg. 0.5) Cable Length: 46" (including sensor) Calibration: Factory calibrated to NaCl 342 ppm. Re-calibration can be done separately for each line, or simultaneously for both.

Power source: 2 x AA batteries (included) Battery life: Approx. 12-18 months Size: 11.6 x 6.8 x1.8 cm (4.6 x 2.6 x .7in.)

27 July 2018

35/40

Code: 060021

Dual TDS Sensor Probes for the DM-2

* Stainless steel sensors * Probe: 1/4" * Cable: 45" (114,3 cm.) * Connector: dual 4+4-pin * Thermometer pins: Yes * Each sensor of the pair has a blue or red wrap and labeled "IN" or "OUT" * Pressure Rating: 16bar @ +23°C Code: 060054

PM1 OEM In-Line TDS purity monitor

An ideal monitor/alert for water coolers and other enclosed water purification systems. Alerts a user when the filtration system requires service.

FEATURES * OEM single line internal TDS monitor that is ideal for enclosed water purification systems. * Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the pre-programmed set-point. * User-defined set points (any even number between 2 and 200).

SPECIFICATIONS * Range: 0-200 ppm (mg/L) * Accuracy: +/- 2% * Calibration: Factory calibrated * Alert: Warning light, optional alarm * Light color: Either red or yellow * Light function: Either flashes or is steady * Alarm: Beeps for 20 seconds, then goes silent * Power Source: AC 110V / 220V ±2% * Cable Length: 62.86 cm (24.75") * Fittings: 1/4" standard, also available with 3/8" or 1/2" * Max. Water Pressure: 200 PSIG (at 23°C with a 1/4" fitting) * Circuit Board Dimensions: 8.9 x 6.9 x 3.8 cm (3.5 x 2.7 x 1.5 in.) * Weight: 266.5 g (9.4 oz.)

27 July 2018

36/40

Code: 060058

Electrolysis system for reverse osmosis test

Variants Code

Description

060058-01 060058-02 060058-03 060058-04 060058-05 060058-06

Electrolysis demostration briefcase 24 VDC. Electrolysis replacement precipitator Aluminium electrode replacement for 060058-02 Iron electrode replacement for 060058-02 Electrolysis replacement ballast Empty electrolysis briefcase with foam

The produced electrolysis process, as well as its viewing, increases intensity and reaction rate depending on the quantity of dissolved salts, among other factors. Water increases its electricity proportionally to the quantity of dissolved salts it contains.

Contents of the briefcase: * Electrolysis precipitator * 2 aluminium electrodes * 2 iron electrodes * Transformer * Code: 060065

PM-2 external In-Line TDS Purity Monitor 220V.,110V.

Variants Code

Description

060065-01 060065-02

PM-2 external In-Line TDS Purity Monitor 220V. PM-2 external In-Line TDS Purity Monitor 110V.

An ideal monitor/alert for water coolers and other enclosed water purification systems. Alerts a user when the filtration system requires service.

FEATURES * External single line internal TDS monitor that is ideal for most water purification systems. * Includes a light and optional alarm that alerts the user service is required when the TDS level reaches the pre-programmed set-point. * User-defined set points (any even number between 2 and 200).

SPECIFICATIONS * Range: 0-200 ppm (mg/L) * Accuracy: +/- 2% * Calibration: Factory calibrated * Alert: Warning light,

27 July 2018

37/40

optional alarm * Light color: Either red or yellow * Light function: Either flashes or is steady * Alarm: Beeps for 20 seconds, then goes silent * Power Source: AC 110V / 220V ±2% * Cable Length: 62.86 cm (24.75") * Fittings: 1/4" standard, also available with 3/8" or 1/2" * Max. Water Pressure: 200 PSIG (at 23°C with a 1/4" fitting) * Dimensions: 12.9 x 7.3 x 6 cm (5 x 2.9 x 2.4 in.) * Weight: 340 g (12 oz.)

Code: 060067

DM-2EC Commercial/residential in-Line Dual Conductivity Monitor (5)

Inline ELECTRICAL CONDUCTIVITY monitor that can be installed on industrial water filtration systems such as car washes, window washing, manufacturing, and food processing.

FEATURES * Highly efficient and accurate due to its advanced microprocessor technology. * Displays EC levels of the Feed Water and Product Water with in & out electrode probes. * Auto-Off function conserves battery power. The unit shuts off automatically after 3 minutes. * Dual Range - Measures from 0-999 µS, with a resolution of 1 ppm. From 1000 to 9990 µS, the resolution is in 10 µS increments, indicated by a blinking 'x10' image. * Factory Calibrated: calibrated to 1413 µS. The DM-2EC features digital calibration. * Diagnostic error messaging * Shielded sensor cables * Comes equipped with 1/4 inch Mur-lok® Quick-Connect T-fittings. Also available with 3/8" or 1/2" fittings. * Installs quickly and easily.

Differences from the DM-1: * Measures EC (Electrical Conductivity) in µS (micro-Siemens). * Designed for commercial/industrial applications. * Stronger, water-resistant casing. * Digital calibration can be done individually on each line. * Improved design, including an extra large, easy-to-read LCD display. * Longer, waterproof, shielded cables. * Variable mounting bracket.

SPECIFICATIONS * Range: 0-9990 µS * Accuracy: ±2% * Cable Length: 46" (including sensor), shielded cables * Sensor: Dual, 1/4" diameter for quick-connect fittings (model SP-3, included) * Digital Calibration: Digitally factory calibrated to 1413 µS. Re-calibration can be done separately for each line. * Power source: 2 x AA batteries (included) * Battery life: Approx. 2 years * Size: 11.6x6.8x1.8cm (4.6x2.6x.7in.)

27 July 2018

38/40

Shut-Off valves Code: 060031

Shut-off valve 4 ways (6 screws) 1/4''

Code: 060032

Shut-off valve white 1/4''

Code: 060033

Shut-Off Valve ( White ) with Quick Connector 1/4''

Variants Code

Description

060033-02

Shut-Off Valve ( White ) with Quick Connector 1/4''

27 July 2018

39/40

Powered by TCPDF (www.tcpdf.org)