s& t c je ons o r P luti So
SHERIDAN MARINE By River, By Road, By Mail... 01491 652 085
Window Push Rubbers fit rubber seals Removal
Order the Solutions
To start, pull out the Insert Rubber releasing the Frame Rubber and window from the boat. The window should now ‘pop’ out and be removed.
Striping Removing the holding screws at each end should release the frames. Carefully remove the glass and take note of the position of existing materials in the frame.
Cleaning Thoroughly clean the glass, the frame & boat before rebuilding. This will help to ensure a watertight seal when putting the window back together later.
Rubbing Compound
Metal Cleaner
s& t c je ons o r P luti So
SHERIDAN MARINE By River, By Road, By Mail... 01491 652 085
Window Push Rubbers fit rubber seals New materials
Order the Solutions
Fit the new Window Rubbers, Felt & Nylon in position and rebuild the window. Window Rubbers
The window should fit together tightly now; creating a waterproof seal.
Refitting
Place the Frame Rubber on the boat first with the join at the bottom. Begin to ease the window into the rubber, you may need two people here, until fully in & seated. Use the Insert Rubber to tighten the seal and finish the window off. Most window kits come with a more detailed fitting guide too.
Accessories F22 Mk1 Bottom Window Window Rubber Tool
F22 Mk1 Top Window
F22 Mk2 Window F23 Window
© Sheridan Marine 2018. All rights reserved. E&OE. This is a project guidance sheet and not a ‘How-to’ fact book. It is presumed that all work is carried out safely following the product manufacturers instructions. Each project may differ so may need further discussions and guidance.