How Level Sensor Helps to Determine the Level in Cement Silo?

How Level Sensor Helps to Determine the Level in Cement Silo?

In a silo, how is the content preserved? With your eyes, it seems to be painful to detect the level of the solid granule cement in the large container. A suitable level sensor is manufactured to determine the specific change in the level of the cement. It measures the higher and lower percentage of the solid cement dust.

While pouring or storing the valuable cement in the silo, do the specific level measurement. The new sensor tools are invented to serve your objective.

What Type of Data You Should Require?

The cement silo level indicator does repetitions in the case of cement level gauging. Place the device at the safety angle of the cement silo to have the proper information. When you transport the container of the cement to the third party, you need the measurement. If the silo doesn’t store the required amount of the cement, the weight of cement may go down. The sensor updates you in this connection.

The best position of the level switch in cement silo is half the radius of the container. While tank emptying and filling, it can monitor the changes correctly.

However, maybe you need assistance if the tank size is not standard. Perhaps, the cement slopes down in the tank due to the boxy size of the silo. For level measuring and tracking, feel free to contact the manufacturer.

Another realistic point is that you should not expect 100 percent accuracy. Your assumption is based on the span of the silo, and volume of the cement.

Sometimes, the reading can be varied as the configuration of the level measurement sensor is not tuned up.

Take the average measurement rate. Say, people, shift 5 tonnes cement from the total 30 tonnes pile from the silo. It will be straight 25 tonnes. Right?

Actually, due to the variation in the position of the sensor and configuration, the amount may be different slightly. So, ask yourself whether you need 100 percent perfection forvlow level cement silos measurement.

While configuring a vibrating fork level sensing switch, mention the type of the device. You have both integral and remote-controlled switches to specify the level.

There are different probe housing cable entries. A customer has to select the probe housing. It ranges from polyamide (different editions) to the BSP double compression gland.

Adjust the time for easy configuration. The normal time delay is adjustable from 2 to 20 seconds depending on the covered or non-covered probe housing.

Finally, opt for the exact extension material (such as galvanized iron).

Simultaneously, put a focus on the probe and tines length.

Sapcon offers various unique solid cement level measurement tools with a complete installation guide. It helps customers to install, configure and calibrate the level sensors.