CERTIFICATION TEST REPORT limited version (non-CBI) Rev 1 Report no.: 300-ELAB-2635-EPA Rev 1
Teknologiparken Kongsvang Allé 29 DK-8000 Aarhus C +45 72 20 20 00 info@dti.dk www.dti.dk
Page 1 of 42 Init.: JSA/ Order no.: 175714 No. of annexes: 27 Requested by:
Company: Address: Postcode/town: Country: Email: Web:
Product:
Wood burner for residential heating Type: Rais Q-Tee II USA
Sample:
Incoming at DTI, Aarhus:
13 March 2023
Test period:
Dates of testing:
14-17 March 2023 (both inclusive)
Procedure
Testing of solid fuel appliance in accordance with DTI method “ELAB-PP-BR-15” based on relevant selection of standards and methods: ASTM E2515 Yes ASTM E3053 (Cordwood) No ASTM E2779 (Pellets) No US EPA Method 28R in combination with ASTM E2780 (Cribwood) Yes CSA B415.1 Yes EPA Communication on ALT-125 method for Cordwood testing No
Result:
The stove/ meets the requirements of NSPS §40 CFR Part 60.
Remarks:
See paragraph 2 - Remarks.
Terms:
The test was accomplished under ISO17025 accreditation and in in compliance with international requirements, and the general terms and conditions of The Danish Technological Institute. The test results apply to the tested products only. This test report may be reproduced in extract only if the laboratory has approved the extract in writing. Danish Technological Institute is Notified Body with identification number 1235 and DIN Certco test laboratory, PL 168.
Issued:
Date 09.08.2023, Danish Technological Institute, Aarhus, Stoves&Boiler test lab
Signature:
Jes Sig Andersen Senior Specialist
Jes Sig Andersen
Digitally signed by: Jes Sig Andersen DN: CN = Jes Sig Andersen C = DK O = Teknologisk Institut // CVR: 56976116 Date: 2023.08.09 12:32:00 +02'00'
Rais AS Industrivej 20 DK-9900 Frederikshavn Denmark info@rais.dk www.rais.dk
Test reg. no. 300