SATK32 SERIES
HEAT INTERFACE UNIT Electronic HIU’s to protect your network from inefficiency & failure while reducing energy use and cost to your tenants. “Only the Altecnic HIU could support the full remote control of flow in the heat network we needed to deliver a 5th generation heat network and optimise system performance. It was the first and remains the only OpenTherm (Nest, Tado) compatible HIU on the market even today.” Marko Cosic Technical Director Coheat Ltd
The SATK32 will automatically control output to hold a configurable low return temperature limitation (RTL) and can be pre-configured and pre-commissioned prior to install, while the Modbus output allows individual or global remote configuration via BMS or Modbus network. It limits the primary flow rate for network protection failure and provides a configurable integral room controller compatible with smart controllers such as ‘Nest’, Hive’ etc. Our fully ‘clamshell’ insulated HIU unit reduces heat, and the configurable preheat setting saves energy and cost for the tenant and the network equating to an:
Annual bill of just £93 per dwelling for both heating and hot water or 0.03 pence/kWh. Altecnic Ltd, Mustang Drive, Stafford, ST16 1GW T: +(44) 0 1785 218200 E: sales@altecnic.co.uk Registered in England No: 2095101