








Transparent BOPP Film.
Non heat-sealable.
Surface treatment for printing and/or lamination.
Non heat-sealable lm; Internal or external surface treatment; Excellent optical properties (gloss and transparency); Optimal performance in horizontal or vertical lling machines; Medium thermal resistance.
Flexible packaging for foods: doughs, co ees, chocolate products, dried soups, nutritional powders;
Flexible packaging for non-foods: pet food; paperboard lamination and graphics applications in general; Continuous labels (WAL Roll Fed), laminated or monolayer options, and Magazine Labels (WAL Cut & Stack);
Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal lling processes.
All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.
If the temperature is not at the recommended level, the following problems might occur:
- Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination;
- Film transparency reduction;
- Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP lms are kept at operating room temperature for 24 hours before use.
Transparent BOPP Film
Non heat-sealable
Surface treatment for labels and stickers
Non heat-sealable lm;
Internal or external surface treatment;
Excellent optical properties (gloss and transparency);
Optimal performance in exographic printers and rotogravure printing.
Self-adhesive labels and tags (Pressure-Sensitive Labeling).
All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.
If the temperature is not at the recommended level, the following problems might occur:
- Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination;
- Film transparency reduction;
- Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP lms are kept at operating room temperature for 24 hours before use.
Transparent BOPP Film
Non heat-sealable
Surface treatment for lamination
Non-Stick - Release property
Non heat-sealable lm;
Internal or external surface treatment; Excellent optical properties (gloss and transparency); Untreated surface with Non-Stick - Release property; Excellent performance in Cold Seal processes.
Flexible packaging for foods: ice creams, chocolates, cereal bars, and candies; Designed for non-heated lling and sealing processes.
It is recommended not to store this material at temperatures above 30° C, with relative humidity of 60%, protected against direct sunlight, rainfall and dust. Its physical properties might deteriorate if it is stored under adverse conditions other than as established above, and so an adequate inventory rotation for this material is recommended.
All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.
If the temperature is not at the recommended level, the following problems might occur:
- Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination;
- Film transparency reduction;
- Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP lms are kept at operating room temperature for 24 hours before use.
Transparent BOPP Film
Non heat-sealable
High-intensity surface treatment
Non heat-sealable lm;
Internal or external surface treatment;
Excellent optical properties (gloss and transparency);
Low stretch property providing high sti ness;
Excellent performance and yield in coating machines due to its good atness and low residual shrinkage properties.
Indicated for adhesive tapes;
All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.
If the temperature is not at the recommended level, the following problems might occur:
- Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination;
- Film transparency reduction;
- Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP lms are kept at operating room temperature for 24 hours before use.
Transparent BOPP lm
Non-heat-sealable
Surface treatment for printing
Non-heat-sealable lm;
Surface treatment on inner or outer layer;
Excellent optical properties (gloss and transparency); Low stretching properties providing high sti ness; Excellent performance and yielding in coaters owing to good planeness and low residual shrinkage.
Suitable for printed adhesive tapes
All products are stored and transported in dry, covered and clean environments.
It is recommended that storage and transportation take place at temperature around 30°C and 60% relative humidity.
If the temperature and humidity are not as recommended, the following issues may occur:
- Decreased level of surface treatment, leading to printing and/or lamination di culties;
- Decreased lm transparency;
- Too low CoF, making processing and machinability di cult.
BOPP lms are recommended to be kept at operating room temperature for 24 hours before use.