Catálogo_Plain_INGLÊS

CATALOGUE

POLO PLAIN Get to know the BOPP PLAIN family

@ p o l o fi l m s

PL A I N

FA M I LY

TPY Transparent BOPP Film.

Non heat-sealable.

Surface treatment for printing and/or lamination.

MAIN CHARACTERISTICS Non heat-sealable film; Internal or external surface treatment; Excellent optical properties (gloss and transparency); Optimal performance in horizontal or vertical filling machines; Medium thermal resistance.

MOST COMMON APPLICATIONS Flexible packaging for foods: doughs, coffees, chocolate products, dried soups, nutritional powders; Flexible packaging for non-foods: pet food; paperboard lamination and graphics applications in general; Continuous labels (WAL Roll Fed), laminated or monolayer options, and Magazine Labels (WAL Cut & Stack); Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

TPY.PSL Transparent BOPP Film Non heat-sealable Surface treatment for labels and stickers

MAIN CHARACTERISTICS Non heat-sealable film; Internal or external surface treatment; Excellent optical properties (gloss and transparency); Optimal performance in flexographic printers and rotogravure printing.

MOST COMMON APPLICATIONS Self-adhesive labels and tags (Pressure-Sensitive Labeling).

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

PL A I N

FA M I LY

TPY.RL Transparent BOPP Film Non heat-sealable Surface treatment for lamination Non-Stick - Release property

MAIN CHARACTERISTICS Non heat-sealable film; Internal or external surface treatment; Excellent optical properties (gloss and transparency); Untreated surface with Non-Stick - Release property; Excellent performance in Cold Seal processes.

MOST COMMON APPLICATIONS Flexible packaging for foods: ice creams, chocolates, cereal bars, and candies; Designed for non-heated filling and sealing processes.

STORAGE CONDITIONS It is recommended not to store this material at temperatures above 30° C, with relative humidity of 60%, protected against direct sunlight, rainfall and dust. Its physical properties might deteriorate if it is stored under adverse conditions other than as established above, and so an adequate inventory rotation for this material is recommended.

All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

TFA Transparent BOPP Film Non heat-sealable High-intensity surface treatment

MAIN CHARACTERISTICS Non heat-sealable film; Internal or external surface treatment; Excellent optical properties (gloss and transparency); Low stretch property providing high stiffness; Excellent performance and yield in coating machines due to its good flatness and low residual shrinkage properties.

MOST COMMON APPLICATIONS Indicated for adhesive tapes;

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%.

If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability.

It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

W W W. P O LO F I L M S .CO M . B R

@ p o l o fi l m s

PL A I N

FA M I LY

TFA.IMP Transparent BOPP film Non-heat-sealable Surface treatment for printing

MAIN CHARACTERISTICS Non-heat-sealable film; Surface treatment on inner or outer layer; Excellent optical properties (gloss and transparency); Low stretching properties providing high stiffness; Excellent performance and yielding in coaters owing to good planeness and low residual shrinkage.

MOST COMMON APPLICATIONS Suitable for printed adhesive tapes

STORAGE CONDITIONS All products are stored and transported in dry, covered and clean environments.

It is recommended that storage and transportation take place at temperature around 30°C and 60% relative humidity.

If the temperature and humidity are not as recommended, the following issues may occur: - Decreased level of surface treatment, leading to printing and/or lamination difficulties; - Decreased film transparency; - Too low CoF, making processing and machinability difficult.

BOPP films are recommended to be kept at operating room temperature for 24 hours before use.