GROHE Planning Rapid SL - Planning notes attachment
On-the-wall installation in front of masonry. Rapid SL can be secured to all sufficiently strong masonry. • The screws and dowels supplied can be used in solid masonry. • Suitable special dowels must be used in walls made from materials with lower compressive strength.
1. Depth of drilled hole = Dowel length + 10 mm 2. Drill diameter = Dowel diameter
On-the-wall installation in front of lightweight studded wall partitions. Rapid SL can also be installed in front of lightweight studded wall partitions. Minimum dimensions for lightweight studded wall partitions made of metal • Single studded wall partition CW profiles 75 x 50 x 0.6 mm The profiles positioned behind the respective WC and bidet elements must be designed as UA-profiles 75 x 40 x 2.0 mm. • Double studded wall partition with fishplating, e.g. Knauf W116 CW-profiles 50 x 50 x 0.6 mm. Minimum dimensions for lightweight studded wall partitions made of wood • Single studded wall partition 80 x 48 mm • Cladding: 2 x 12.5 mm gypsum board or 1 x 12.5 mm gypsum fibre board. The elements are preferably secured to a water-resistant plywood board. The board is fitted between two profiles so that it is flush with the front edge of the profiles. Installation in room-high lightweight studded wall partitions made of metal or wood. Rapid SL can be installed in lightweight studded wall partitions made of metal to DIN 18183 or the wall can be constructed in accordance with the working data sheets for gypsum plaster board installation wall 50 (Rigips Installationswand 50) or Knauf W116. Accurately fitting element feet for UW-50 and UW-75 profiles ensure that the elements are easily positioned on the front edge of the studded wall partition. They are secured at the sides to metal studded wall partitions with self-tapping screws. Timber uprights - min. dimensions 80 x 48 mm - are required for installation in wooden studded wall partitions. The elements are secured with four wood screws in wooden studded wall partitions.