Cotton Farming Ginners Marketplace June 2022

Ginners Marketplace COTTON

COTTON FARMING IS THE OFFICIAL PUBLICATION OF THE GINNING INDUSTRY.

Stay On Top Of Seed House Safety And Maintenance Elevated seed houses are valuable for short-term seed storage, wet seed storage and gins with limited yard space. Design improvements allow overhead seed houses to be an efficient method for loading trucks from flat-storage houses and gins.

When fully loaded, a double-hopper seed house can weigh 200,000 pounds or more. Structural integrity is critical.

Volatile weather can put older seed houses at risk, especially those not properly maintained. Through the years, moisture and chemicals from seed along with humidity cause the inevitable — rust and corrosion. Since the damage primarily occurs inside the seed house, it is out of sight and mind. If a structural failure occurs, personnel are at risk of injury.

All cotton gin managers should review their overhead seed house safety and maintenance procedures before the start of the 2022 cotton ginning season.

Observe Safety Checklist  Never go beneath a seed hopper that contains seed.  Provide proper fall protection for all ladders and catwalks.  Do not ever enter the seed trailer or climb on the side walls of the trailer while beneath a hopper that contains seed.

 Post decals, “DANGER – DO NOT ENTER AREA BELOW HOPPER DOORS WHEN SEED IS IN STORAGE HOUSE.” These are free from your local ginning association or from www.cliffgranberrycorp.com  Contact your ginning association or loss control representative to get a copy of the “Cottonseed System Safety Policy” for employees, visitors and outside contractors, such as seed haulers. This is also available at www.cliffgranberrycorp.com.  Be sure to use all other known gin safety procedures daily.

Maintenance And Repair Tips  All proper safety precautions including the use of personal protective equipment (PPE) should be taken by all personnel who perform maintenance and repairs.  Clean out all seed.  Clean hopper panels to remove seed oil.  Smooth the inside surfaces of the hopper panels again.  Carefully examine the entire seed house for stress fractures and loose hardware, especially if industrial vibrators have been used.  Remove rust and corrosion.

Lummus Ag Technology wants to express its appreciation to our many loyal customers for their continued support and business. With the challenges we face in our industry, we are continually working to evolve and adapt to changing market conditions and customer needs.

Lummus offers a wide range of products and services, all geared to help your operation be efficient and profitable. Regardless of the project scope, contact Lummus to discuss your goals and needs to ensure your success.

Just a short list of items we offer:  Gin Dor-Les® and E.E. Dor-Les® Press upgrades 16” diameter Bottom Ram Conversion Hydraulic Tramper/Pusher Conversion Premier™ III Series Hydraulic Pumping Units Press Rebuilds (strain rods, boxes, sills, etc.)  Quality OEM Repair Parts  Unmatched Technical Service

Cotton Ginners Marketplace

 All-new complete Gin Plants  Ginning Machinery (individual machines, stand-alone systems, presses, etc.)  Press Consoles and Main Control Consoles  Burner and Moisture Unit Gas Train/Controls upgrades  Air Monitoring and Fire Detection Kits  DGC 2020 Gin and Feeder Controls

The future is bright! Cotton prices have optimism at levels we haven’t seen in a while. A renewed commitment to customer service has Lummus excited for the future – join us as we move forward!

®

®

TWITTER: @COTTONFARMING

Physical Address: 225225 Bourne Boulevard • Savannah, Georgia 31408-9586 Physical Address: Bourne Boulevard • Savannah, Georgia 31408-9586USA USA Mailing Address: P.O. Box 929929 • Pooler, Georgia 31322-0929 USA Mailing Address: P.O. Box • Pooler, Georgia 31322-0929 USA Phone: (912) 447-9000 • Fax: (912) 447-9250 Phone: (912) 447-9000 • Fax: (912) 447-9250 TollToll Free (USA Only): 1-800-4LUMMUS (1-800-458-6687) Free (USA Only): 1-800-4LUMMUS (1-800-458-6687) Web Site: www.lummus.com • E-mail: lummus.sales@lummus.com Web Site: www.lummus.com • E-mail: lummus.sales@lummus.com

2022 Lummus ©© 2022 Lummus AgCorporation Technology

JUNE 2022 | COTTON FARMING

19

Benefits Of The Catwalk Best industry practices include using a trailer-viewing catwalk mounted on the outside of the vertical columns, about 9.5 feet above the driveway. This structure provides a good vantage point to see into the tops of the trailers to determine when to open and close the hopper doors.

Jim Granberry, president of Cliff Granberry Corp., contributed this article. Email jim@cliffgranberrycorp.com or call 972-381-8899.

* * * * *

TCGA Scholarship Has Been Established To Honor Tony D. Williams At the Texas Cotton Ginners’ Association’s member reception, Barry Street announced a scholarship had been established honoring TCGA’s Tony Williams, who officially retired at the end of April after 33 years of service.

Williams has served as the organization’s executive vice president for nearly all his tenure with TCGA. The official name of the newly established scholarship will be the Tony D. Williams Endowed Scholarship for Cotton. Williams will be engaged moving forward on the requireTony ments for scholarship and the completion of Williams the scholarship framework.

The association thought this would be a great way to honor Williams for his service. If you would like to contribute to the scholarship online, please visit https://bit.ly/3yJ3aAq. To contribute by mail, checks should be made payable to Texas Tech Foundation. Just note “Tony D. Williams Endowed Scholarship for Cotton” on the check. Send your gift to: Texas Tech Foundation, Box 42123, Lubbock, TX 79409.

If you have any questions regarding the scholarship, please contact Aaron Nelsen at the TCGA office (512-476-8388).

Thank you for your consideration.

* * * * *

CCGGA’s Rodriquez Completes Prestigious Ag Leadership Program

through the books we read, people we met and the unforgettable experiences we lived.”

Rodriquez ended her remarks by encouraging her classmates.

“As we move forward in our lives, I challenge us to continue to be open minded, inquisitive, empathetic, passionate, resilient and grateful. Leave your impact on your families, communities, ag industry and the world.”

Truly words to live by, not just for her colleagues, but for all of us.

CCGGA President and CEO Roger Isom remarked after the event, “Priscilla was made for the CALF program, and the CALF program was made for her. The association is incredibly proud of her for this accomplishment, and her speech is indicative of her growth and just the type of leader she has started to become. The association and the agricultural industry are lucky to have her.”

Cotton’s Calendar  June 2-7: Cotton Growers Warehouse Association Annual Convention, Hyatt Centric Park City, 3551 N Escala Ct, Park City, Utah  June 8-11: Cotton Warehouse Association of America Annual Convention, Coeur d’Alene Golf & Spa Resort , Coeur d’Alene, Idaho

June 15: PCCA Board, Delegate Body & Marketing Pool Committee Meetings, Lubbock, Texas





June 16: Calcot Board of Directors Meeting, Phoenix, Arizona

June 22-24: ACSA’s Annual Convention, The Ritz-Carlton Lake Tahoe, Truckee, California 

 June 29-30: 2022 Arizona Cotton Ginners Annual Meeting, Little America Hotel, Flagstaff, Arizona  July 17-20: Southern Southeastern Mid-Year Board Meetings, Sheraton Bay Point, Panama City Beach, Florida 

July 21: Calcot Board of Directors Meeting, Phoenix, Arizona

Aug. 2-4: American Cotton Producers-Cotton Foundation Summer Meeting, Little Rock Marriott, 3 Statehouse Plaza, Little Rock, Arkansas 

 Aug. 17: PCCA Board, Delegate Body & Marketing Pool Committee Meetings, Lubbock, Texas  Aug. 23: PCCA South Texas Area & Marketing Pool Committee Meetings, Corpus Christi, Texas  Aug. 24-26: NCC Mid-Year Board Meeting, Hyatt Regency Newport Beach, California

Sept. 20: PCCA Board of Directors & Annual Meetings, Lubbock, Texas

Cotton Ginners Marketplace



A journey that lasted for more than 27 months began Oct. 10, 2019, and came to a conclusion Feb. 5, 2022, for Priscilla Rodriquez, California Cotton Ginners and Growers Association director of regulatory affairs.

The journey included meetings that covered more than 125 days, not including travel and study time. It included trips to Atlanta, Georgia, and Washington, DC, as well as Germany, Poland and the Czech Republic.

Rodriquez was one of 24 members of the historic Class 50 of the California Agricultural Leadership Foundation program who completed their program where it began at California State University-Fresno in February. Disrupted by the COVID-19 pandemic, but not deterred, Class 50 weathered the storm to complete their business.

Rodriquez had the distinct honor of addressing the commencement for Class 50 by giving the opening speech.

She began by stating, “We started this program as strangers, quickly became friends and ultimately family. The bonds and friendships created through the program will continue on for years to come. We may all have different stories, but one thing is true for all of us. This program made a lasting impact

20

COTTON FARMING | JUNE 2022



Sept. 26: Calcot Board of Directors Meeting, Phoenix, Arizona



Sept. 27: Calcot 95th Annual Meeting, Phoenix, Arizona

 Oct 19: PCCA Board, Delegate Body & Marketing Pool Committee Meetings, Lubbock, Texas 

Nov 18: Calcot Board of Directors Meeting, California

Dec 14: PCCA Board, Delegate Body & Marketing Pool Committee Meetings, Lubbock, Texas 

An informative email summary of your gin’s daily performance.

Text 662-809-9730 for an example report COTTONFARMING.COM

E L E VAT E D S E E D H O U S E

“We really like the safety and the speed of this seed house.”

Associated Growers Co-op, Inc., Athens, AL

Steeper Hoppers with 10-Gauge Steel 50% Larger Square Hydraulic Doors Conversion Kits for Most Seed Houses MINIMIZE SEED BRIDGING • SAFER • FASTER • STRONGER

Call Jim - (972) 381-8899 / cliffgranberrycorp.com

NORTHERN / LUCUS MACHINE, INC 1116 E SLATON HWY LUBBOCK, TX 79404

FOR SALE: 1 – 158 GIN STAND W/ CONTROLS & 700 FEEDER MANUFACTURER OF HI- CAPACITY LINT CLEANING SYSTEMS IN 86” TO 110” WIDTHS NEW 60”, 72”, & 80” OVERSHOT BATTERY CONDENSERS 96” TO 144” INCLINE CLEANERS, STICK MACHINES, & AIR LINE SEPARATORS

Cotton Ginners Marketplace

HIGH CAPACITY VACUUMS USED & FACTORY REBUILT GIN MACHINERY PLASTIC BALING PRESSES COMPLETE LINE OF REPAIR PARTS FOR MURRAY, MITCHELL, H.E., CONSOLIDATED, CONTINENTAL, MOSS, LUMMUS, HORN, & CMI

https://shop.lubbockelectric.com TWITTER: @COTTONFARMING

806-745-8156 1-800-776-8182 FAX: 806-745-0564 NORTHERNLUCUS@YAHOO.COM WWW.NORTHERNLUCUS.COM JUNE 2022 | COTTON FARMING

21