How to Use a Wrist Cuff Blood Pressure Monitor
Nurses in hospitals and clinics often need to take blood pressure readings of some patients throughout the day at short intervals. In this situation, the best wrist blood pressure monitor for nurses will help them a great deal. Wrist cuffs can be attached to the patient’s wrist and switched on when the reading has to be taken.
Of course, the accuracy of a good wrist cuff blood pressure monitor depends on the reliability of the company that has manufactured it. In spite of this, it is important to keep some tips in mind before using a wrist cuff blood pressure monitor, let us look at these tips.
Always remember that the patient should be rested for at least 5 minutes before taking the reading. Ideally, he or she should sit in a straight-backed chair and uncross your arms and legs placing your legs on the floor.
Make sure there is no fabric between your wrist skin and the cuff of the monitor
Attach the cuff snugly onto the wrist, but do not make it too tight otherwise it will cause the reading to be inaccurate. You should be able to attach only one finger under the cuff.
Position the monitor towards your inner arm because the pulse is strongest at this point and it is necessary because the wrist blood pressure monitor has a sensor behind the display that reads the blood pressure by recording the pulse rate.
Your arm and wrist should be rested at the level of your heart and you should place your arm over the chest so that your elbow becomes bent. Your palm should be facing your chest and if your arm is supported on a table then your palm should be face up.
This is the method to use the best wrist blood pressure monitor for nurses or for any other health professional. In fact, wrist monitors are also very popular for home use and there are some companies that manufacture monitors that provide excellent results.