FITTING INSTRUCTION FOR DOOR LEVERS ON 52mm ROUND OR SQUARE ROSE – SINGLE OR FULL DUMMY
1 Mark position on door for dummy spindle (1), allowing clearance for rose and door jam.
2 Counterbore 32mm diameter x 5mm deep.
3 Fit dummy spindle to door in counter bored hole, using the 3 shorter screws provided (2), ensuring spindle is square to door with open slot facing down.
1
4 Remove rose cover (3) carefully, twisting and pulling. Taking care not to scratch lever, (some designs of grips will allow complete removal, for others rest rose cover on grip ). For square rose designs, losen grub screw to remove rose cover.
2
5 4
5 Place lever into position and using the 4 longer screws (4) provided, fix rose to door.
6 Replace outer rose, with cut out facing down to floor. For square roses, ensure rose cover is square to door and tighten grub screw on underside of rose.
3
7 Tighten up grub screw (5) on underside of lever with allen key provided.
FULL DUMMY PAIRS Repeat steps 1 to 7 on both sides of door A B
C
E
D
FIXINGS LIST (single dummy)
FIXINGS LIST (full dummy pair)
(A)
1 of Hex key
(A)
1 of Hex key
(B)
1 of M6 grub screw
(B)
2 of M6 grub screw
(C)
1 of dummy spindle
(C)
2 of dummy spindle
(D)
3 of #6 x 1” wood screws
(D)
6 of #6 x 1” wood screws
CONTACT
8 of #4 x 1” wood screws
T : +44 (0)1271 325 325
(E)
4 of #4 x 1” wood screws
(E)
E : sales@turnstyledesigns.com PART NUMBER : 35700
W : www.turnstyledesigns.com
Turnstyle Designs Ltd, Baron Way, Roundswell Business Park, Barnstaple, Devon, EX31 3TB, United Kingdom