MatchMate Plus Crimp Machine Taget Settings
HOSE DASH SIZE
DIE CAGE
FT1320 -550 SLEEVE
FT1330
FT1360 AND FT1340
ET1280 AND FT1380
HOSE DASH SIZE
TARGET FT1390 DIA.
FT1320 -550 SLEEVE
DIE CAGE
FT1330
FT1360 AND FT1340
ET1280 AND FT1380
TARGET FT1390 DIA.
± .15 mm ± .006 in
GH793 with TTC Fittings
± .15 mm ± .006 in
-4 -6 -8 -10 -12 -16 -20 -24
-32
-M150 -2 -M210 -3 -M240 -4 -M280 -5 -M320 -6 -M370 -8 -M465 -9 -M550 -11 -M570 -M690 -23 -17
m o
GH493 with TTC12 Fittings
63 84 45 73 53 80 50 76 48 81 81 92 -
635 430 815 535 735 470 770 505 790 460 460 345 560 -
740 735 880 810 824 736 865 785 895 770 618 660 706 814 760 805 868 815 670 745
125 046 086 061 048 204 149 -
302 211 247 230 222 371 320 297 266 -
17.27mm .680 in 21.21mm .835 in 25.15mm .990 in 28.70mm 1.130 in 32.51mm 1.280 in 41.40mm 1.630 in 49.78mm 1.960 in 57.66mm 2.270 in
-6 -8 -10 -12 -16
.E
-M320 -6 -M420 -8 -M370 -M520 -M465 -M550 -11 -M690
59 56 41 68 64
-20
-24
-32
64 97 -
680 708 855 590 633
784 915 936 855 721
105 025 130
271 191 298
625 300 690 145 250 360 -
758 630 802 920 885 945 945
120 100 290 239 -
296 264 197 226 188
c . s
t c
u d ro
P n o t a 70.87mm 2.790 in
-M210 -4 -M280 -5 -M280
22.76mm .896 in 27.81mm 1.095 in 30.48mm 1.200 in 34.42mm 1.355 in 43.82mm 1.725 in 52.20mm 2.055 in 55.88mm 2.200 in 69.16mm 2.723 in
To determine the target setting, refer to the equipment operator's manual.
NOTE: These target settings for Aeroquip crimp machines are provided to aid in establishing actual settings. While the settings on this chart will give crimp diameters close to, or at, the specified value, the machine operator must check to verify the actual diameter. Before using these target settings, the crimp machine must be properly calibrated. Consult your Aeroquip equipment manual for calibration procedures.
w
w
w
EATON Aeroquip Crimp Specifications A-EQCR-TM001-E November 2005
41