Product Catalog
THE LEADER IN HOSE SYSTEMS TECHNOLOGY 800-367-3678
|
www.campbellfittings.com
Campbell Fittings A
B
PAGES 3-8
• Combination Nipples • Menders • TOE Nipples • Reducing Nipples • Suction Hose Couplings • NST Suction Hose Couplings • Ball & Socket Couplings • Strainers • Foot Valves
F
•C hemJoint™ Couplings •C hemJoint™ Male Stems • ChemJoint™ Weld-on Couplings • ChemJoint™ Unions
G
PAGES 9-12
PAGES 37-40
PAGES 41-46
• Crimpnology Nipples • Male Swivels • Hose Unions • Flanges • Turnback Flanges
C
PAGES 13-24
• Tri-Clamp Fittings • Tri-Clamp Adapters • Machined Ferrules • Washdown Swivels • PCT Couplings (Wine) • Wine Ferrules
H
PAGES 47-54
I
PAGES 55-60
• Ferrules (standard length) • Ferrules (206/frac) • Ferrules (long) • Ferrules (light duty) • Sleeves (standard length) • Sleeves (short)
• Insta-Lock™ •C ampbell Cobra™ Cam & Groove Couplings •S tandard Cobra™ Cam & Groove Couplings
D
E
PAGES 25-30
• Viton® Seal Ground Joint Couplings • Viton® Seal Crimped Steam Couplings • HeatWave Couplings • Interlocking Male Stems • Air Hammer Couplings • Interlocking U-Bolt Clamps • Whip Check Safety Cables
• Barbed Insert Fittings • Brass Push-on Fittings • Garden Hose Couplings • Brass Ferrules
J
PAGES 31-36 • Universal Couplings • UniversaLock™ Couplings • Nitrogen Couplings • Single-Lock Couplings • Double-Lock Couplings
PAGES 61-67 • Worm Gear Clamps • T-Bolt Clamps
• Band Clamps • Band & Buckle • Tools
Campbell Coupling Selection Guide From the Selection Guide below, choose an appropriate coupling based on the hose type and application working pressure. Hose construction will affect the working pressure of a hose system. The following chart outlines the maximum working pressure of each Campbell coupling based on the type and size of hose used, as well as the attachment and identifies the Campbell catalog section in which the coupling can be found. MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) Hose System Components
A
B
Attachment
Hose Type
1/2
3/4
1
1-1/4 1-1/2
2
2-1/2
3
4
5
6
8
10
12
Combination Nipple
Short Sleeve
Rubber
400
350
300
275
250
225
225
225
175
175
175
150
125
100
Combination Nipple
Short Sleeve
Chemical
200
200
200
140
130
120
110
100
50
-
-
-
-
-
Combination Nipple
Short Sleeve
PVC
150
125
100
90
85
65
60
55
40
-
30
20
-
-
Suction Coupling (domestic)
Short Sleeve
Rubber
-
-
-
275
250
225
210
200
175
-
150
100
-
-
Suction Coupling (domestic)
Short Sleeve
PVC
-
-
-
90
85
65
60
55
40
-
30
20
-
-
Ball & Socket Coupling
3,6
Short Sleeve
Rubber
-
-
-
-
-
300
-
250
225
-
140
60
-
-
Ball & Socket Coupling
3,6
Short Sleeve
PVC
-
-
-
-
-
170
-
140
100
-
80
50
-
-
Ferrule
Chem/Rubber
-
-
500
350
325
300
275
250
250
250
225
175
-
-
Crimpnology Nipple Crimpnology Nipple
Ferrule
Soft
-
-
200
175
150
150
125
100
75
65
50
20
-
-
Long Crimpnology Nipple
Long Ferrule
Rubber
-
-
-
-
1000
1000
650
600
500
400
-
-
-
-
Crimpnology Nipple Swivel
Ferrule
Chem/Rubber
-
500
500
-
-
-
-
-
-
-
-
-
-
-
Long Crimpnology Nipple Swivel
Long Ferrule
Chem/Rubber
-
-
-
500
500
500
-
-
-
-
-
-
-
-
Crimpnology Flange (steel)
Ferrule
Chem/Rubber
-
-
-
-
285
285
275
250
250
-
225
175
-
-
Ferrule
Chem/Rubber
-
-
-
-
230
230
230
230
230
-
225
-
-
-
FRAC-16C
Frac Ferrule
Rubber
-
-
-
-
-
-
-
-
400
-
-
-
-
-
100/206 Hose Union (forged steel)
Ferrule
Rubber
-
-
-
-
-
500
-
500
-
-
-
-
-
-
Insta-Lock
Ferrule
Chem/Rubber
250
250
250
250
250
250
150
150
150
75
75
-
-
-
4
Crimpnology Flange (ss)
C D
E
F
Hose Size
Fitting/Coupling
4
Campbell Cobra SS C&G
5
Ferrule
Chem/Rubber
-
-
250
-
250
250
150
150
125
-
-
-
-
-
Campbell Cobra AL C&G
5
Ferrule
Chem/Rubber
-
-
-
-
250
200
150
125
75
-
75
-
-
-
Viton Ground Joint/ Air Hammer/Male Stem
U-Bolt Clamp
Steam
1500
1250
1250
1250
1250
1250
800
500
500
-
300
-
-
-
Viton Ground Joint/ Air Hammer/Male Stem
Long Ferrule
Rubber
1000
1000
1000
1000
1000
1000
650
500
500
-
-
-
-
-
HeatWave Coupling/HW Male
Staked-on Ferrule
Rubber
-
-
-
-
-
call
-
call
-
-
-
-
-
-
UniversaLock
Ferrule
Air
300
300
300
-
-
-
-
-
-
-
-
-
-
-
6
Ferrule
Air
150
150
150
-
-
-
-
-
-
-
-
-
-
Single-Lock Coupling
6
Ferrule
Air
300
300
300
-
-
-
-
-
-
-
-
-
-
-
Double-Lock Coupling
6
Ferrule
Air
300
300
300
-
-
-
-
-
-
-
-
-
-
-
ChemJoint/Male Stem
Ferrule
Chemical
350
400
450
325
250
250
225
225
200
-
-
-
-
-
ChemJoint/Male Stem
Ferrule
Rubber
350
400
450
425
400
350
325
300
250
-
-
-
-
-
Universal
G
6
Tri-Clamp
Ferrule
Sanitary
-
-
500
-
450
350
325
300
-
-
-
-
-
-
Tri-Clamp
Mach. Ferrule
Sanitary
-
-
500
-
500
400
375
350
-
-
-
-
-
-
Wine Fitting
Ferrule
Sanitary
-
-
-
-
450
350
-
300
-
-
-
-
-
-
Wine Fitting
Band Clamps
Sanitary
-
-
-
-
100
100
-
50
-
-
-
-
-
-
HOSE SYSTEM PRESSURE DERATING MULTIPLIERS FOR ELEVATED TEMPERATURES (°F)*
Hose Type
70°
90°
150°
200°
250°
300°
350°
400°
450°
500°
Steam, Hot Tar, Asphalt
1.00
0.95
0.81
0.68
0.56
0.44
0.32
0.20
0.08
N/R
PVC
1.00
0.82
0.30
N/R
N/R
N/R
N/R
N/R
N/R
N/R
All other
1.00
0.91
0.64
0.42
0.20
N/R
N/R
N/R
N/R
N/R
No hose: weld-on or union
1.00
1.00
0.97
0.95
0.92
0.89
0.86
0.84
0.81
N/R
* System temperature is affected by both the media and the environment.
N/R means NOT RECOMMENDED!
1) F or normal fluids (not hazardous, combustible, flammable, volatile, corrosive, ammonia or LPG). Individual testing should be employed for non-normal fluids to ensure capability. Pressures shown are only valid for the fitting/coupling/ attachment and hose combinations indicated and for their threaded mating parts. System working pressure does not include end pull forces. Not for plastic fittings/couplings. All hose systems must be assembled using Campbell procedures and crimp specifications. See elevated temperature derating chart above. Consult factory for reduced temperatures. Never exceed the working pressure of the lowest rated component in the hose system. Maximum working pressure includes the highest pressure the system will experience, such as spikes, surges, and water hammer effects. (For example: If a system consists of a hose rated to 150 PSI and the couplings are rated to 500 PSI, the system should never be used in excess of 150 PSI.)
2) Hose descriptions: Air - any smooth bore rubber air or water hose. Includes most general purpose hose; Chemical – any smooth bore rubber chemical hose, including plastic lined (PTFE, UHMW, XLPE). Does not include soft tube hose; PVC – any smooth bore PVC or vinyl hose; Rubber – any smooth bore rubber hose except steam, hot tar & asphalt, chemical, and soft tube hose; Soft – any smooth bore rubber hose with a thick, soft tube. Usually gum rubber and some food-grade hose; Steam – includes hot tar and asphalt; Sanitary – includes any food-grade hose 3) Ball & Socket pressure ratings are based on 1.5x WP. 4) Due to limitations with flanges, consult factory for temperatures other than 70°F. 5) Campbell COBRA Cam & Groove Couplings are identified by the name “Campbell” on the body, by the ferrule interlock groove, and by the part number, which includes a “C” suffix. Not for air or gas service. 6) Maximum temperature 160°F. 1
Campbell Test Reports Abbreviated Reports and Results Campbell engineering has conducted nearly 1,000 hydrostatic tests. The following are results from several popular products. Please contact our customer support team to receive test reports on other Campbell products. The Safety Factor The RMA requires that hose working pressures include a safety factor commensurate with their intended application. Most hoses are required to meet a 4x safety factor, except the following: Water hose rated under 150 PSI requires a 3x safety factor; Steam hose requires a 10x safety factor; and Hose conveying gas in a liquid state requires a 5x safety factor. (For example: a 150 PSI rated air hose has a 4x safety factor and must be successfully tested to a minimum of 600 PSI.) Campbell’s fitting and coupling pressure ratings match the RMA safety factor requirements with most hoses. Due to the wide variety of industrial hoses, as well as variations in design, construction, and material, we cannot guarantee that our pressure ratings meet the safety factor requirement with every hose. If you have any questions about pressure ratings, please contact Campbell Fittings. HYDROSTATIC TEST REPORT Hose Fuel drop: 3" ContiTech (GY) Infinity r ated to 100 psi. Couplings Cam & Groove: 3” Campbell Cobra aluminum C x E - coupling/sleeve system rated to 75 psi. WP Attachment Crimped: Aluminum Sleeves Goal Burst hose beyond 400 psi. (hose WP of 100 psi. @ 4 to 1 Safety Factor) Results Hose burst at 508 psi. (system exceeded 4x WP)
HYDROSTATIC TEST REPORT Hose Chemical: 2" ContiTech (GY) XLPE r ated to 150 psi. Couplings ChemJoint®: 2” male x female - coupling/ferrule system rated to 250 psi. WP (swivel nut tightened by hand) Attachment Crimped: Stainless Steel Fer r ules Goal Burst hose beyond 600 psi. (hose WP of 150 psi. @ 4 to 1 Safety Factor) Results: Hose burst at 1426 psi. (system exceeded 4x WP)
HYDROSTATIC TEST REPORT Hose Oilfield: 4" ContiTech (GY) FRAC Blender Hose r ated to 400 psi. Couplings Crimpnology Nipple: 4” FRAC-16 both ends* - fitting/ferrule system rated to 400 psi WP Attachment Crimped: Campbell Fr ac Fer r ules, Plated Steel Goal Burst hose beyond 1600 psi. (hose WP of 400 psi. @ 4 to 1 Safety Factor) Results Hose burst at 1715 psi. (system exceeded 4x WP)
HYDROSTATIC TEST REPORT Hose High pressure air: 3” Boston Bulldog Gold HP Air Hose rated to 600 psi. Couplings Ground Joint/Male Stem: 3” Heat Wave® male stem on both ends -coupling/ferrule system rated to 600 psi WP Attachment Crimped: Staked-on Fer r ule Goal Burst hose beyond 2400 psi. at 200°F (hose WP of 600 psi. @ 4 to 1 Safety Factor) Results Hose burst at 3539 psi. at 200°F (system exceeded 4x WP)
* NOTE: similar successful r esults have been achieved with the Campbell “one-piece” 206 union manufactured with the same hose shank design for the same application.
HYDROSTATIC TEST REPORT Hose Frac: 4” ContiTech Oilfield Fracturing Hose rated to 400 psi. Couplings 206 Hose Union: Male x female Campbell 206 hose union rated to 400 psi. Attachment Crimped: Campbell Fr ac Fer r ules, Plated Steel Goal Burst hose beyond 1600 psi. (hose WP of 400 psi. @ 4 to 1 Safety Factor) Results Hose burst at 1879 psi. (system exceeded 4x WP)
HYDROSTATIC TEST REPORT Hose Sanitary: 1-1/2” Continental Purple Snake rated to 232 psi. Couplings Sanitary: 1-1/2” Tri-Clamp -fitting/ferrule system rated to 450 psi. WP Attachment Crimped: Stainless Steel Fer r ules Goal Burst hose beyond 928 psi. (hose WP of 232 psi. @ 4 to 1 Safety Factor) Results Hose burst at 2198 psi. (system exceeded 9.5x WP) 2
HYDROSTATIC TEST REPORT Hose High pressure air: 2" Dayco Wildcatter r ated to 3000 psi.* Couplings Ground Joint: 2” Campbell Viton® Seal female x male - coupling/ferrule system rated to 1000 psi. WP Attachment Crimped: Steel Long Fer r ules Goal Establish the limits of the coupling/ferrule system, performed with the wing nut tightened only by hand. *NOTE: Campbell system is only rated to 1000 psi. Results Hose burst at 9500 psi. (couplings exceeded WP by more than 9x WP)
HYDROSTATIC TEST REPORT Hose Layflat: 1-1/2" Kuriyama rated to 75 psi. Couplings Aluminum pin-lug: 1-1/2” Campbell male x female - coupling/sleeve system rated to 150 psi. Attachment Crimped: Car bon Steel Sleeves Goal Burst hose beyond 225 psi. (hose WP of 75 psi. @ 3 to 1 Safety Factor) Results Hose burst at 228 psi. (system exceeded 3x WP)
Campbell Fittings
A
3
A Fittings & Accessories for Multi-Purpose and Utility Hose COMBINATION NIPPLES AND MENDERS
Campbell Crimpnology™ offers crimping flexibility for your multi-purpose hose applications.
SUCTION HOSE COUPLINGS Features & Benefits
Features & Benefits •
•
•
•
Maximum number of serrations for maximum holding power. Long lead serration for easier hose insertion. Formed hex wrench area on 3/4” through 1-1/2” combination nipples for easier installation.
• •
Recommended Hose Attachment • •
Sleeves Preformed Band Clamps
Recommended Use • Liquid, bulk handling
Recommended Hose Attachment • •
aximum number of serrations for M maximum holding power. Long lead serration for easier hose insertion. Suction Couplings machined from pipe eliminate porosity and parting lines, improving sealing and retention.
Sleeves Preformed Band Clamps
Recommended Use • Liquid, bulk handling, low-pressure air BALL & SOCKET COUPLINGS Features & Benefits •
Proven, Campbell-style machined hose shank is designed for crimping (crimp specs available). Shank design dramatically improves sealing and retention, cuts installation time in half. Hose shanks are welded to ball & socket ball ends.
•
•
Recommended Hose Attachment • • Bauer-style vs. Campbell Ball & Socket
Sleeves Preformed Band Clamps
Recommended Use • •
Water Suction/Discharge Sewage bypass
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1 Hose System Components
Hose Size
Fitting/Coupling
Attachment
Hose Type
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
10
12
Combination Nipple
Short Sleeve
Rubber
400
350
300
275
250
225
225
225
175
175
175
150
125
100
Combination Nipple
Short Sleeve
Chemical
200
200
200
140
130
120
110
100
50
-
-
-
-
-
Combination Nipple
Short Sleeve
PVC
150
125
100
90
85
65
60
55
40
-
30
20
-
-
Suction Coupling
Short Sleeve
Rubber
-
-
-
275
250
225
210
200
175
-
150
100
-
-
Suction Coupling
Short Sleeve
PVC
-
-
-
90
85
65
60
55
40
-
30
20
-
-
Ball & Socket Cplg*
Short Sleeve
Rubber
-
-
-
-
-
300
-
250
225
-
140
60
-
-
Ball & Socket Cplg*
Short Sleeve
PVC
-
-
-
-
-
170
-
140
100
-
80
50
-
-
4
See footnotes 1, 2, 3 and 6 on Page 1
*Ball & Socket safety factor is 1.5x working pressure.
A COMBINATION NIPPLES & MENDERS
Hastelloy® hose size
part number
list each
1 1-1/2 2 3 4
HAHAST-4 HAHAST-6 HAHAST-8 HAHAST-12 HAHAST-16
POR POR POR POR POR
Brass
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
THREADED Steel
hose size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10 12
HAS-2 HAS-3 HAS-4 HAS-5 HAS-6 HAS-8 HAS-10 HAS-12 HAS-16 HAS-20 HAS-24 HAS-32 HAS-40 HAS-48
6.55 5.55 6.21 8.02 9.06 12.24 24.07 27.83 42.11 96.80 108.93 189.85 307.62 444.18
Plated Steel
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10 12
HAPS-2 HAPS-3 HAPS-4 HAPS-5 HAPS-6 HAPS-8 HAPS-10 HAPS-12 HAPS-16 HAPS-20 HAPS-24 HAPS-32 HAPS-40 HAPS-48
316 Stainless
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10 12
HASS-2 HASS-3 HASS-4 HASS-5 HASS-6 HASS-8 HASS-10 HASS-12 HASS-16 HASS-20 HASS-24 HASS-32 HASS-40 HASS-48
6.70 5.97 7.08 8.40 10.49 14.65 26.49 33.36 48.00 104.23 122.61 233.27 385.89 557.23 23.68 23.51 23.62 30.12 36.96 51.45 92.85 130.49 203.94 440.21 552.37 1059.75 3054.83 POR
HAB-2 HAB-3 HAB-4 HAB-5 HAB-6 HAB-8 HAB-10 HAB-12 HAB-16
Aluminum
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
HAA-2 HAA-3 HAA-4 HAA-5 HAA-6 HAA-8 HAA-10 HAA-12 HAA-16 HAA-20 HAA-24
21.16 30.36 30.59 37.64 43.49 62.76 112.94 152.62 296.29 20.76 17.55 18.71 19.48 19.89 23.68 61.54 52.90 80.62 176.37 198.19
hose size
part number
list each
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10 12
HAGS-3 HAGS-4 HAGS-5 HAGS-6 HAGS-8 HAGS-10 HAGS-12 HAGS-16 HAGS-20 HAGS-24 HAGS-32 HAGS-40 HAGS-48
17.20 13.31 18.71 15.98 17.63 26.78 30.35 42.83 93.78 115.57 203.52 346.47 484.84
316 Stainless
1 1-1/4 1-1/2 2 3 4 5 6 8
part number
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10 12
HAS-3 BV HAS-4 BV HAS-5 BV HAS-6 BV HAS-8 BV HAS-10 BV HAS-12 BV HAS-16 BV HAS-20 BV HAS-24 BV HAS-32 BV HAS-40 BV HAS-48 BV
316 Stainless
HASS-2 BV HASS-3 BV HASS-4 BV HASS-5 BV HASS-6 BV HASS-8 BV HASS-10 BV HASS-12 BV HASS-16 BV HASS-20 BV HASS-24 BV HASS-32 BV HASS-40 BV HASS-48 BV
list each 8.27 9.82 12.12 11.95 14.31 25.32 30.43 44.94 102.27 109.87 200.61 345.62 473.79 31.45 31.58 29.05 43.75 39.21 59.34 108.88 126.15 203.16 577.27 540.11 911.91 POR POR
HAGSS-4 HAGSS-5 HAGSS-6 HAGSS-8 HAGSS-12 HAGSS-16 HAGSS-20 HAGSS-24 HAGSS-32
48.85 52.63 52.82 58.67 159.99 220.58 576.71 622.53 1378.06
part number
list each
REDUCER npt x hose
hose size
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10 12
Steel
Steel
BEVELED Steel
GROOVED
1 X 3/4 HRS-4X3 1-1/4 X 1 HRS-5X4 1-1/2 X 1-1/4 HRS-6X5 2 X 1-1/2 HRS-8X6 2-1/2 X 2 HRS-10X8 3 X 2-1/2 HRS-12X10 4X3 HRS-16X12
Plated Steel
1 X 3/4 HRPS-4X3 1-1/4 X 1 HRPS-5X4 1-1/2 X 1-1/4 HRPS-6X5 2 X 1-1/2 HRPS-8X6 2-1/2 X 2 HRPS-10X8 3 X 2-1/2 HRPS-12X10 4X3 HRPS-16X12
316 Stainless
1 X 3/4 HRSS-4X3 1-1/4 X 1 HRSS-5X4 1-1/2 X 1-1/4 HRSS-6X5 2 X 1-1/2 HRSS-8X6 2-1/2 X 2 HRSS-10X8
13.72 20.45 16.13 21.01 36.45 44.15 85.90 13.84 21.48 17.37 22.65 38.39 45.77 87.46 50.33 63.06 85.90 106.36 134.33
Other configurations and materials not listed above can be quoted upon request.
5
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
EXPANDER Steel
npt x hose
part number
3/4 X 1 HES-3X4 1 X 1-1/4 HES-4X5 1-1/4 X 1-1/2 HES-5X6 1-1/2 X 2 HES-6X8 2 X 2-1/2 HES-8X10 2-1/2 X 3 HES-10X12 3X4 HES-12X16
list each
REDUCING NIPPLES
TOE NIPPLES AND REDUCING NIPPLES
Steel
npt x npt
10.73 11.77 14.80 25.57 36.60 44.60 89.81
Plated Steel 1/2 X 3/4 HEPS-2X3 3/4 X 1 HEPS-3X4 1 X 1-1/4 HEPS-4X5 1-1/4 X 1-1/2 HEPS-5X6 1-1/4 X 2 HEPS-5X8 1-1/2 X 2 HEPS-6X8 2 X 2-1/2 HEPS-8X10 2-1/2 X 3 HEPS-10X12 3X4 HEPS-12X16
14.94 11.19 12.52 15.47 32.59 26.01 37.84 47.10 99.27
316 Stainless 1/2 X 3/4 HESS-2X3 3/4 X 1 HESS-3X4 1 X 1-1/4 HESS-4X5 1 X 1-1/2 HESS-4X6 1-1/4 X 1-1/2 HESS-5X6 1-1/4 X 2 HESS-5X8 1-1/2 X 2 HESS-6X8 2 X 2-1/2 HESS-8X10
37.94 35.74 77.89 92.03 90.13 101.26 104.31 138.07
MENDER Plated Steel
hose size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10 12
HCPS-2 HCPS-3 HCPS-4 HCPS-5 HCPS-6 HCPS-8 HCPS-10 HCPS-12 HCPS-16 HCPS-20 HCPS-24 HCPS-32 HCPS-40 HCPS-48
10.57 8.39 8.64 12.36 13.76 17.45 27.92 28.39 51.00 145.12 113.66 246.63 369.57 742.11
316 Stainless 3/4 1 1-1/4 1-1/2 2 3 4 6
HCSS-3 HCSS-4 HCSS-5 HCSS-6 HCSS-8 HCSS-12 HCSS-16 HCSS-24
62.32 65.19 68.82 77.08 87.38 194.90 240.29 1000.12
HCB-3 HCB-4 HCB-5 HCB-6 HCB-8
17.28 17.79 28.79 46.75 51.43
Brass
6
3/4 1 1-1/4 1-1/2 2
TOE NIPPLES Steel
npt x length
part number
list each
1/2 X 1-1/2 1/2 X 2 3/4 X 1-1/2 3/4 X 2 1X2 1-1/4 X 2 1-1/4 X 2-1/2 1-1/2 X 2 1-1/2 X 2-1/2 1-1/2 X 3 2X2 2 X 2-1/2 2X3 2-1/2 X 2-1/2 3X3 3 X 3-1/2 3X4 4X4
RN-2S RN-2 RN-3S RN-3 RN-4 RN-5 RN-5L RN-6 RN-6L RN-6XL RN-8 RN-8L RN-8XL RN-10S RN-12 RN-12L RN-12XL RN-16
2.86 2.86 3.12 3.16 4.60 6.00 6.75 7.18 7.67 8.72 8.24 9.94 10.43 29.57 32.32 35.95 39.53 133.45
304 Stainless
1/2 X 1-1/2 1/2 X 2 3/4 X 1-1/2 3/4 X 2 1X2 1-1/4 X 2 1-1/4 X 2-1/2 1-1/2 X 2 1-1/2 X 2-1/2 1-1/2 X 3 2X2 2 X 2-1/2 2X3 2-1/2 X 2-1/2 3X3 3 X 3-1/2 3X4
10.71 RNS-2S 11.16 RNS-2 RNS-3S 11.47 11.63 RNS-3 16.80 RNS-4 RNS-5 17.51 RNS-5L 19.13 RNS-6 21.34 20.49 RNS-6L 21.44 RNS-6XL RNS-8 27.62 28.23 RNS-8L RNS-8XL 33.33 RNS-10S 78.83 84.01 RNS-12 RNS-12L 91.09 RNS-12XL 106.27
part number
list each
3/4 X 1/2 NS 3-2 1 X 3/4 NS 4-3 1-1/4 X 1 NS 5-4 1-1/2 X 1-1/4 NS 6-5 2 X 1-1/2 NS 8-6 2-1/2 X 2 NS 10-8 3X2 NS 12-8 3 X 2-1/2 NS 12-10 4X3 NS 16-12
12.16 12.66 17.59 19.02 21.22 39.99 65.60 44.79 70.01
A SUCTION HOSE COUPLINGS
IMPORT SUCTION HOSE COUPLINGS
IMPORT SUCTION HOSE COUPLINGS (NST threads)
COMPLETE SET
COMPLETE SET
Shanks: Aluminum Nut: Brass
COMPLETE SET Shanks: Plated Steel Nut: Brass
hose size
part number
list each
1-1/4 1-1/2 2 2-1/2 3 4 6 8
CSB-5 CSB-6 CSB-8 CSB-10 CSB-12 CSB-16 CSB-24 CSB-32
51.01 36.97 47.73 76.21 87.08 138.86 277.57 944.27
FEMALE SHANK Shank: Plated Steel Nut: Brass
hose size
part number
list each
1-1/4 1-1/2 2 2-1/2 3 4 6
FSB-5 FSB-6 FSB-8 FSB-10 FSB-12 FSB-16 FSB-24
31.13 22.26 25.71 44.89 52.33 84.43 176.98
hose size
part number
list each
hose size
part number
list each
1-1/2 2 2-1/2 3 4 6
CAB-150 CAB-200 CAB-250 CAB-300 CAB-400 CAB-600
17.16 25.40 47.10 52.92 93.36 220.09
1-1/2 2-1/2
NSTA-150 NSTA-250
26.86 51.49
Shanks: Brass Nut: Brass 1-1/2 2 3 4
CBB-150 CBB-200 CBB-300 CBB-400
Plated Steel
hose size
part number
list each
1-1/4 1-1/2 2 2-1/2 3 4 6 8
MS-5 MS-6 MS-8 MS-10 MS-12 MS-16 MS-24 MS-32
18.94 14.93 22.66 34.23 36.12 53.97 123.75 194.35
50.37 70.81 175.65 273.55
Shank: Aluminum Nut: Brass part number
list each
1-1/2 2 2-1/2 3 4 6
FAB-150 FAB-200 FAB-250 FAB-300 FAB-400 FAB-600
11.87 17.43 28.43 34.73 61.96 125.48
Shank: Brass Nut: Brass FBB-150 FBB-200 FBB-300 FBB-400
1-1/2 2-1/2
NSTD-150 NSTD-250
Shanks: Brass Nut: Brass
1-1/2 2-1/2
NSTB-150 NSTB-250
Neoprene (NPSM)
hose size
1-1/2 2 3 4
Shanks: Ductile Iron Nut: Ductile Iron
76.11 173.77
hose size
part number
list each
1-1/4 1-1/2 2 2-1/2 3 4 6 8
WN-5 WN-6 WN-8 WN-10 WN-12 WN-16 WN-24 WN-32
0.93 0.93 0.94 1.10 1.80 2.21 6.28 13.59
SPANNER WRENCH 29.17 43.81 98.49 167.08
MALE SHANK hose size
part number
list each
1-1/2 2 2-1/2 3 4 6
MA-150 MA-200 MA-250 MA-300 MA-400 MA-600
5.74 8.00 15.07 18.20 32.83 66.21
MB-150 MB-200 MB-300 MB-400
23.94 34.77 85.00 136.44
size
part number
list each
1-1/2 2 3 4 6 8
SW-6 SW-8 SW-12 SW-16 SW-32 SW-32
11.23 11.44 13.97 14.49 65.30 65.30
ADJUSTABLE HYDRANT WRENCH part number
list each
AHW-1
58.35
•
Brass 1-1/2 2 3 4
27.67 67.41
WASHER
FEMALE SHANK
Aluminum
MALE SHANK
Shanks: Aluminum Nut: Brass
• •
Adjustable for 1-1/4” square nuts and pentagon hydrant nuts up to 1-3/4” point to flat. Spanner hook for 1-1/2” through 6” pin lug nuts. 18” overall length.
7
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
BALL & SOCKET COUPLINGS
FOOT VALVE (painted cast iron)
FOOT VALVES & STRAINERS
npt size
part number
list each
1-1/2 2 2-1/2 3 4 6 8
FV-6 FV-8 FV-10 FV-12 FV-16 FV-24 FV-32
40.85 63.70 78.92 99.16 181.32 419.03 906.22
Foot Valve components are available upon request.
BALL & SOCKET COMPLETE SET hose size
part number
list each
2 3 4 6 8
BSGS-8 BSGS-12 BSGS-16 BSGS-24 BSGS-32
176.43 261.73 346.90 668.37 1134.91
FEMALE* (socket x machined hose end) hose size
part number
list each
2 3 4 6 8
BFGS-8 BFGS-12 BFGS-16 BFGS-24 BFGS-32
67.58 98.76 127.90 260.48 426.87
*Sold without SBR ring gasket
MALE (ball x machined hose end)
npsm size
part number
list each
1-1/2 2 2-1/2 3 4 6 8
RHS-6 RHS-8 RHS-10 RHS-12 RHS-16 RHS-24 RHS-32
27.38 31.54 35.86 42.80 59.54 167.43 372.08
SQUARE HOLE STEEL STRAINER npsm size
part number
list each
1-1/2 2 2-1/2 3 4 6
SHS-6 SHS-8 SHS-10 SHS-12 SHS-16 SHS-24
26.85 31.13 34.78 46.16 64.23 180.64
hose size
part number
list each
TOP HOLE STEEL STRAINER
2 3 4 6 8
BMGS-8 BMGS-12 BMGS-16 BMGS-24 BMGS-32
66.97 98.02 121.42 221.58 389.63
npsm size
part number
list each
1-1/2 2 3
THS-6 THS-8 THS-12
77.65 86.89 196.25
BOTTOM HOLE STEEL STRAINER
RING GASKET SBR
8
ROUND HOLE STEEL STRAINER
hose size
part number
list each
2 3 4 6 8
BSG-8 BSG-12 BSG-16 BSG-24 BSG-32
5.98 7.24 10.10 20.40 27.42
npsm size
part number
list each
1-1/2 2 3
BHS-6 BHS-8 BHS-12
79.74 90.43 202.50
Campbell Fittings
B
9
for Critical Application or High Pressure B Fittings Multi-Purpose Hose & Chemical Hose Campbell Crimpnology™ offers crimping flexibility for your multi-purpose hose applications.
CRIMPNOLOGY NIPPLES
Smooth End Detail
Features & Benefits •
Designed for use with Campbell Interlocking Ferrules.
Rounder Serrations
•
Fittings use the same ferrules as Campbell COBRA Parts C and E, ChemJoint Couplings, and ContiTech Insta-Lock Cam & Groove Couplings to keep ferrule inventory low and flexible.
Sharper Serrations
Interlock groove on fitting locks ferrule into place for the ultimate in holding power.
Interlock Groove
•
•
Campbell’s custom ferrule positioning system makes assembly easy and speeds crimping.
•
Graduated serration pattern (sharper near the interlock, rounder near the end, with smooth end detail to reduce potential failure caused by abrasion) grips, seals, and protects hose.
•
•
Flanges meet ANSI/ASME B16.5 150 pound class specifications.
Crimpnology Nipple
CRIMPNOLOGY SWIVEL Features & Benefits
Shank and ferrule lengths are matched for performance and to avoid potential hose tube or cover damage. Crimped assemblies are low profile and eliminate sharp edges from band clamp buckles.
•
360° swivel rotation between the threaded hex and hose barb for easy installation, eliminates hose kinking.
•
Threaded body includes hex wrench-flats.
•
Viton O-Ring and snap ring inside hex area. Crimpnology Swivel
Special Features •
•
•
Crimpnology Nipples provide an excellent fitting solution for medium pressure applications such as “Frac Hose”, mud-pump hose, and other abusive applications. Long Shank Crimpnology Nipples provide excellent sealing and retention for high-pressure applications. (See ratings chart below) 206 Hose Union machined from forged steel, eliminates porosity.
Note: Swivel is not for continuous rotation applications.
Swivel Hex Body
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1 Hose System Components
10
Hose Size
Fitting/Coupling
Attachment
Hose Type
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
Crimpnology Nipple
Ferrule
Chem/Rubber
-
500
350
325
300
275
250
250
250
225
175
Crimpnology Nipple
Ferrule
Soft
-
200
175
150
150
125
100
75
65
50
20
Long Crimpnology Nipple
Long Ferrule
Rubber
-
-
-
1000
1000
650
600
500
400
-
-
Crimpnology Nipple Swivel
Ferrule
Chem/Rubber
500
500
-
-
-
-
-
-
-
-
Long Crimpnology Nipple Swivel
Long Ferrule
Chem/Rubber
-
-
500
500
500
-
-
-
-
-
-
Crimpnology Flange (steel)
Ferrule
Chem/Rubber
-
-
-
285
285
275
250
250
-
225
175
Crimpnology Flange (ss)
Ferrule
Chem/Rubber
-
-
-
230
230
230
230
230
-
225
-
FRAC-16C
Frac Ferrule
Rubber
-
-
-
-
-
-
-
400
-
-
-
100/206 Hose Union (forged steel)
Ferrule
Rubber
-
-
-
-
500
-
500
-
-
-
-
See footnotes 1, 2 and 4 on Page 1
B SQUARE CUT END
CRIMPNOLOGY NIPPLES
Steel
hose size
part number
1-1/2 2 2-1/2 3 4 6 8
HAS-6C SQ HAS-8C SQ HAS-10C SQ HAS-12C SQ HAS-16C SQ HAS-24C SQ HAS-32C SQ
316 Stainless
THREADED Plated Steel
hose size
part number
list each
1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
HAPS-4C HAPS-5C HAPS-6C HAPS-8C HAPS-10C HAPS-12C HAPS-16C HAPS-20C HAPS-24C HAPS-32C
27.26 27.36 25.12 30.15 50.68 58.33 72.11 110.38 152.75 303.77
316 Stainless
1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
HASS-4C HASS-5C HASS-6C HASS-8C HASS-10C HASS-12C HASS-16C HASS-20C HASS-24C HASS-32C
Hastelloy®
1 1-1/2 2
HAHAST-4C HAHAST-6C HAHAST-8C
40.44 56.23 57.20 67.42 127.72 146.08 215.88 364.39 753.86 POR POR POR POR
SCH. 80 THREADED LONG SHANK
Steel
hose size
part number
1-1/2 2 2-1/2 3 4
HALPS-6C HALPS-8C HALPS-10C HALPS-12C HALPS-16C
list each 46.22 47.59 78.18 104.12 153.71
SCH. 80 THREADED (for 400 psi frac hose)
Steel
hose size
part number
list each
4
FRAC-16C
83.91
Use only heavy duty FRAC ferrules
1-1/2 2 2-1/2 3 4 6 8
HASS-6C SQ HASS-8C SQ HASS-10C SQ HASS-12C SQ HASS-16C SQ HASS-24C SQ HASS-32C SQ
FIGURE 206 HOSE UNION SET list each 26.32 30.95 49.66 55.99 70.83 130.74 320.28 56.54 78.29 134.29 162.36 239.88 743.25 POR
GROOVED
part number
3 4
206S-12C-400 206S-16C-400
list each 299.88 323.99
FIGURE 100 HOSE UNION SET Forged Steel
hose size
part number
2 3 4
100S-8C-500 100S-12C-400 100S-16C-400
list each 117.09 288.91 323.99
HOSE UNION NUT
Steel
hose size
part number
list each
1-1/2 2 2-1/2 3 4 6 8
HAGS-6C HAGS-8C HAGS-10C HAGS-12C HAGS-16C HAGS-24C HAGS-32C
34.22 40.41 65.05 73.61 87.62 166.74 POR
316 Stainless
1 1-1/2 2 2-1/2 3 4 6 8
Forged Steel
hose size
HAGSS-4C HAGSS-6C HAGSS-8C HAGSS-10C HAGSS-12C HAGSS-16C HAGSS-24C HAGSS-32C
51.92 70.96 87.45 186.57 207.92 274.53 832.69 984.47
Forged Steel
hose size
part number
4
206N-16C-400
list each 140.44
VITON O-RING Viton size
part number
list each
4
206VO-16
1.51
MALE SWIVEL Steel
hose size
part number
3/4 1 1-1/4 1-1/2 2
HAPS-3C SW HAPS-4C SW HALPS-5C SW HALPS-6C SW HALPS-8C SW
316 Stainless
hose size
part number
3/4 1 1-1/4 1-1/2 2
HASS-3C SW HASS-4C SW HALSS-5C SW HALSS-6C SW HALSS-8C SW
list each 81.01 84.80 108.58 143.49 242.06 list each POR 247.47 POR POR POR
11
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
FLANGE-FLOATING
FLANGED (with 150lb. fixed flange) Steel
(150lb.)
Steel
hose size
part number
list each
hose size
part number
list each
1-1/2 2 2-1/2 3 4 6 8
FHAS-6C FHAS-8C FHAS-10C FHAS-12C FHAS-16C FHAS-24C FHAS-32C
115.77 117.36 210.62 185.39 203.21 329.37 537.54
1-1/2 2 2-1/2 3 4 6 8
FF150S-6 FF150S-8 FF150S-10 FF150S-12 FF150S-16 FF150S-24 FF150S-32
20.96 42.26 50.46 48.32 60.61 95.87 210.38
hose size
part number
list each
1 1-1/2 2 2-1/2 3 4 6 8
FF150SS-4 FF150SS-6 FF150SS-8 FF150SS-10 FF150SS-12 FF150SS-16 FF150SS-24 FF150SS-32
316 Stainless
316 Stainless
1 1-1/2 2 2-1/2 3 4 6 8
FHASS-4C 263.35 FHASS-6C 295.87 FHASS-8C 324.30 FHASS-10C 502.29 FHASS-12C 489.58 FHASS-16C 690.50 FHASS-24C 1077.56 FHASS-32C 2231.74
TURNBACK
(for use with 150lb. floating flange)
Steel
hose size
part number
list each
1-1/2 2 2-1/2 3 4 6 8
THAS-6C THAS-8C THAS-10C THAS-12C THAS-16C THAS-24C THAS-32C
56.63 62.38 118.22 125.96 199.23 519.75 724.86
FLANGE-THREADED
(150lb.)
Steel
316 Stainless
1 1-1/2 2 2-1/2 3 4 6 8
84.92 116.06 145.90 144.07 216.15 307.81 493.03 POR
npt size
part number
list each
1-1/2 2 2-1/2 3 4 6 8
FT150S-6 FT150S-8 FT150S-10 FT150S-12 FT150S-16 FT150S-24 FT150S-32
19.39 49.89 57.90 60.21 80.04 143.45 233.37
316 Stainless
THASS-4C 106.38 THASS-6C 117.53 THASS-8C 224.76 THASS-10C 301.35 THASS-12C 381.64 THASS-16C 496.48 THASS-24C 1091.70 THASS-32C 2404.18
1 1-1/2 2 2-1/2 3 4 6 8
FT150SS-4 114.08 FT150SS-6 123.35 FT150SS-8 60.30 FT150SS-10 159.15 FT150SS-12 220.92 FT150SS-16 337.63 FT150SS-24 363.21 FT150SS-32 1062.70
FLANGE-SLIP ON
(150lb.)
Steel
npt size
part number
list each
1-1/2 2 2-1/2 3 4 6 8
FS150S-6 FS150S-8 FS150S-10 FS150S-12 FS150S-16 FS150S-24 FS150S-32
30.32 37.16 62.87 46.89 57.72 85.67 142.68
316 Stainless
12
1 1-1/2 2 2-1/2 3 4 6 8
FS150SS-4 FS150SS-6 FS150SS-8 FS150SS-10 FS150SS-12 FS150SS-16 FS150SS-24 FS150SS-32
54.82 68.24 79.73 116.88 137.41 159.42 243.20 546.55
Campbell Fittings
C
13
C Cam & Groove Couplings for Liquid, Bulk, and Chemical Transfer Campbell
INSTA-LOCK™
INSTA-LOCK™
Insta-Lock™ is an innovative, durable, and reliable coupling system suitable for greater convenience, security and performance.
Features & Benefits
Campbell
COBRA
•
A perfect synergy of hose & coupling system performance to handle all of your tough applications.
•
Revolutionary ergonomic, easy-to-use automatic locking handle design eliminates issues with lockout, tag-out specifications.
•
Improved robust design with precision-machined shank serrations and 360° mechanical interlock with Campbell ferrules.
by
CAMPBELL COBRA “Campbell COBRA” is high-performance version in Parts C and E.
Features & Benefits •
Campbell COBRA C’s and E’s are designed by Campbell, produced to strict Campbell specifications and rigorously tested.
•
360° interlock groove on fitting locks ferrule into place for the ultimate in holding power.
•
Shank and ferrule lengths are matched for performance and to avoid potential hose tube or hose cover damage.
•
Serrations designed to grip, seal, and protect hose when crimped.
Ferrule zone: 3-15/16”
Campbell Cobra Part C and matching Campbell Interlocking Ferrule
STANDARD COBRA System rated performace with sleeves or Strapbinder preformed band clamps.
Locking arms for COBRA couplings
Campbell Crimpnology™ offers crimping flexibility for your liquid, bulk, and chemical transfer hose applications.
• Locking handles can be purchased assembled onto the coupling or as a kit and retrofitted onto existing inventory.
All Campbell Cam & Groove couplings are designed to couple and interchange with couplings made to specifications: ASTM F1122, CID A-A59326, MIL-C-27487.
All Campbell Cam & Groove parts should utilize the safety lockpin with camlock arms while in service.
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1 Hose System Components
Hose Size
Fitting/Coupling
Attachment
Hose Type
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
Insta-Lock
Ferrule
Chem/Rubber
250
250
250
250
250
250
150
150
150
75
75
Campbell Cobra SS C&G
Ferrule
Chem/Rubber
250
-
250
250
150
150
125
-
-
Campbell Cobra AL C&G
Ferrule
Chem/Rubber
-
-
250
200
150
125
75
-
75
14
See footnotes 1, 2 and 5 on Page 1
C PART B
INSTA-LOCK™ COUPLINGS
Stainless Steel
PART A Stainless Steel
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
A050SS A075SS A100SS A125SS A150SS A200SS A250SS A300SS A400SS A500SS A600SS
46.06 49.82 51.91 61.21 63.94 69.33 125.67 132.12 230.30 380.12 403.03
Aluminum
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
A050AL A075AL A100AL A125AL A150AL A200AL A250AL A300AL A400AL A500AL A600AL
13.21 10.67 13.36 21.36 18.52 20.27 29.91 28.70 62.88 102.73 124.30
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
A050BR A075BR A100BR A125BR A150BR A200BR A250BR A300BR A400BR A500BR A600BR
21.12 25.58 28.39 46.12 49.21 59.58 106.06 119.18 204.70 319.15 430.00
Brass
Aluminum
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
B050SS B075SS B100SS B125SS B150SS B200SS B250SS B300SS B400SS B500SS B600SS
81.36 99.15 103.36 145.70 139.91 148.09 205.48 262.67 324.06 436.67 610.48
Aluminum
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
B050AL B075AL B100AL B125AL B150AL B200AL B250AL B300AL B400AL B500AL B600AL
28.18 28.73 43.94 51.97 50.91 50.15 71.79 81.67 110.61 145.03 149.24
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
B050BR B075BR B100BR B125BR B150BR B200BR B250BR B300BR B400BR B500BR B600BR
45.15 69.21 74.30 88.39 101.21 124.33 160.48 225.15 326.94 427.64 588.97
Brass
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
C050AL C075AL C100AL C125AL C150AL C200AL C250AL C300AL C400AL C500AL C600AL
24.91 41.21 36.97 50.76 50.15 53.61 65.15 77.27 115.91 134.24 236.36
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
C050BR C075BR C100BR C125BR C150BR C200BR C250BR C300BR C400BR C500BR C600BR
46.97 57.88 69.70 112.82 101.33 120.64 173.33 197.33 318.18 602.97 756.97
Brass
PART D Stainless Steel
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
D050SS D075SS D100SS D125SS D150SS D200SS D250SS D300SS D400SS D500SS D600SS
74.55 99.61 102.06 114.61 126.48 141.55 248.82 265.52 337.27 545.45 589.52
Aluminum
PART C Stainless Steel
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
C050SS C075SS C100SS C125SS C150SS C200SS C250SS C300SS C400SS C500SS C600SS
86.21 88.24 102.67 132.88 120.88 128.73 208.33 227.06 338.70 517.15 484.24
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
D050AL D075AL D100AL D125AL D150AL D200AL D250AL D300AL D400AL D500AL D600AL
28.33 43.18 43.94 52.18 48.12 50.15 72.73 76.21 95.27 136.52 245.45
15
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM PART D (continued from previous page)
Brass npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
D050BR D075BR D100BR D125BR D150BR D200BR D250BR D300BR D400BR D500BR D600BR
57.94 64.27 68.76 84.85 91.06 107.39 181.12 202.73 279.33 393.33 681.82
Aluminum
PART F Stainless Steel
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
F050SS F075SS F100SS F125SS F150SS F200SS F250SS F300SS F400SS F500SS F600SS
49.12 55.91 60.76 73.94 77.76 90.91 161.39 195.61 270.06 334.33 467.67
Aluminum
PART E Stainless Steel
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
E050SS E075SS E100SS E125SS E150SS E200SS E250SS E300SS E400SS E500SS E600SS
49.15 52.88 51.67 71.03 80.67 89.24 207.76 166.09 309.09 460.94 612.76
Aluminum
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
E050AL E075AL E100AL E125AL E150AL E200AL E250AL E300AL E400AL E500AL E600AL
13.48 14.61 16.67 22.67 24.61 27.58 36.36 39.06 69.33 113.30 159.09
Brass
16
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
E050BR E075BR E100BR E125BR E150BR E200BR E250BR E300BR E400BR E500BR E600BR
26.58 28.94 53.94 58.58 78.79 105.15 136.70 162.00 267.94 598.18 798.82
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
F050AL F075AL F100AL F125AL F150AL F200AL F250AL F300AL F400AL F500AL F600AL
11.76 12.58 14.82 20.88 20.85 21.79 38.70 37.03 67.73 121.06 142.42
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
F050BR F075BR F100BR F125BR F150BR F200BR F250BR F300BR F400BR F500BR F600BR
25.73 30.12 39.61 55.88 57.03 76.33 146.45 167.33 261.21 448.12 655.73
Brass
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
DC050AL DC075AL DC100AL DC125AL DC150AL DC200AL DC250AL DC300AL DC400AL DC500AL DC600AL
34.00 37.88 46.97 47.73 51.67 51.82 54.39 73.15 89.18 96.97 220.39
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
DC050BR DC075BR DC100BR DC125BR DC150BR DC200BR DC250BR DC300BR DC400BR DC500BR DC600BR
36.79 51.67 64.09 80.30 94.88 116.36 139.39 173.55 232.67 364.55 559.39
Brass
PART DP Stainless Steel
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
DP050SS DP075SS DP100SS DP125SS DP150SS DP200SS DP250SS DP300SS DP400SS DP500SS DP600SS
40.61 43.91 45.45 50.33 60.36 67.88 145.45 108.45 194.48 235.70 421.64
Aluminum
PART DC Stainless Steel
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
DC050SS DC075SS DC100SS DC125SS DC150SS DC200SS DC250SS DC300SS DC400SS DC500SS DC600SS
63.91 50.73 59.42 78.24 94.15 131.30 140.88 196.64 248.91 421.21 483.27
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
DP050AL DP075AL DP100AL DP125AL DP150AL DP200AL DP250AL DP300AL DP400AL DP500AL DP600AL
7.12 13.55 19.18 22.85 21.88 18.24 29.82 27.97 37.03 64.27 83.27
continued on next page
C PART DP (continued from previous page)
Brass
npt size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
DP050BR DP075BR DP100BR DP125BR DP150BR DP200BR DP250BR DP300BR DP400BR DP500BR DP600BR
36.73 37.27 29.70 54.91 52.76 57.33 77.79 89.82 188.45 261.21 578.79
JUMP SIZE B Aluminum
npt size
part number
list each
3x4 4x3
B3040AL B4030AL
117.18 135.73
DOUBLE D Aluminum
npt size
part number
list each
2 3 4
DD200AL DD300AL DD400AL
82.79 120.91 150.73
SPOOL ADAPTER Aluminum
npt size
part number
list each
1 1-1/2 2 3 4
AA100SS AA150SS AA200SS AA300SS AA400SS
100.82 106.70 162.30 270.55 368.48
JUMP SIZE C Stainless Steel
npt size
part number
list each
3 x 2-1/2 C3025SS
294.30
3x4
141.12
Aluminum
C3040AL
JUMP SIZE E Stainless Steel
npt size
part number
list each
3 x 2-1/2 E3025SS
193.55
JUMP SIZE COUPLER X ADAPTER Stainless Steel
npt size
part number
list each
2 x 1-1/2 DA2015SS 291.97 3x2 DA3020SS 309.73 4x3 DA4030SS 566.97 6x4 DA6040SS 1257.24
Aluminum
npt size
part number
list each
2x3 3x2 3x4 4x3 6x4
DA2030AL DA3020AL DA3040AL DA4030AL DA6040AL
78.85 85.12 116.42 125.88 212.58
17
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
PART C - LOCKING HANDLES (with ferrule interlock)
CAMPBELL COBRA CAM & GROOVE COUPLINGS
316 Stainless
hose size
part number
1 1-1/2 2 3 4
CL-316-100C 67.16 CL-316-150C 98.71 CL-316-200C 124.73 CL-316-300C 210.55 CL-316-400C 307.13
Aluminum
1-1/2 2 3 4
CL-AL-150C CL-AL-200C CL-AL-300C CL-AL-400C
316 Stainless
PART C (with ferrule interlock) 316 Stainless
hose size
part number
1 1-1/2 2 2-1/2 3 4
C-316-100C C-316-150C C-316-200C C-316-250C C-316-300C C-316-400C
Aluminum
1-1/2 2 2-1/2 3 4 6
Brass
1 1-1/2 3 4
C-AL-150C C-AL-200C C-AL-250C C-AL-300C C-AL-400C C-AL-600C C-BR-100C C-BR-150C C-BR-300C C-BR-400C
list each 30.62 57.81 83.18 112.66 147.20 203.70 18.97 23.23 30.41 38.65 53.43 163.39 44.06 66.92 174.36 244.18
Brass - Forged Machined Shank
2
C-BR-200CM
80.36 88.55 109.32 122.40
C-S-100C C-S-150C C-S-200C C-S-300C C-S-400C
1 1-1/2 2 2-1/2 3 4
E-316-100C E-316-150C E-316-200C E-316-250C E-316-300C E-316-400C
Aluminum
1-1/2 2 2-1/2 3 4 6
Brass
1 1-1/2 2 3 4
list each 23.29 45.68 69.11 97.24 127.10 188.86
E-AL-150C E-AL-200C E-AL-250C E-AL-300C E-AL-400C E-AL-600C
9.13 12.07 19.45 21.55 35.02 101.00
E-BR-100C E-BR-150C E-BR-200C E-BR-300C E-BR-400C
30.40 51.03 72.90 146.50 218.58
Steel (investment cast)
1 1-1/2 2 3 4
E-S-100C E-S-150C E-S-200C E-S-300C E-S-400C
33.32 45.05 53.53 88.00 136.48
21.28 27.90 42.96 75.40 101.56
CONE STRAINERS (for use with Part C’s) Stainless
size
part number
list each
2 3 4
SGPC-200 SGPC-300 SGPC-400
109.23 158.65 231.28
STANDARD COBRA CAM & GROOVE COUPLINGS PART A 316 Stainless
85.80
Steel (investment cast)
1 1-1/2 2 3 4
part number
Polycarbonate
list each
PART E (with ferrule interlock) hose size
CAM & GROOVE SIGHT GLASS
hose size
part number
list each
2 3 4 6 8
CGSS-8 CGSS-12 CGSS-16 CGSS-24 CGSS-32
34.39 48.94 58.69 90.10 163.04
npt size
part number
list each
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
A-316-75 A-316-100 A-316-125 A-316-150 A-316-200 A-316-250 A-316-300 A-316-400 A-316-500 A-316-600
14.55 19.97 29.27 34.47 40.04 66.06 72.64 136.01 222.11 275.26
304 Stainless
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
A-SS-75 A-SS-100 A-SS-125 A-SS-150 A-SS-200 A-SS-250 A-SS-300 A-SS-400 A-SS-500 A-SS-600 A-SS-800
Aluminum
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
Brass
3/4 1 1-1/4 1-1/2 2
13.29 15.99 23.48 27.25 31.57 56.25 60.70 119.95 203.18 247.91 660.99
A-AL-75 A-AL-100 A-AL-125 A-AL-150 A-AL-200 A-AL-250 A-AL-300 A-AL-400 A-AL-500 A-AL-600 A-AL-800
5.02 5.74 7.89 6.53 7.92 14.70 14.27 23.29 50.31 49.45 230.96
A-BR-75 A-BR-100 A-BR-125 A-BR-150 A-BR-200
14.14 16.03 23.58 25.89 34.19
continued on next page 18
C PART A (continued from previous page) npt size
part number
list each
2-1/2 3 4 5 6
A-BR-250 A-BR-300 A-BR-400 A-BR-500 A-BR-600
54.93 65.79 111.38 239.60 336.48
Ductile Iron
1-1/2 2 3 4 5
A-DI-150 A-DI-200 A-DI-300 A-DI-400 A-DI-500
Poly-Glass
3/4 1 1-1/4 1-1/2 2 3 4
A-PP-75 A-PP-100 A-PP-125 A-PP-150 A-PP-200 A-PP-300 A-PP-400
17.75 21.30 34.58 54.36 82.53 3.24 3.68 5.60 5.65 6.67 12.07 29.00
Aluminum (with stainless handles)
npt size 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6
Brass
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
part number B-ALS-75 B-ALS-100 B-ALS-125 B-ALS-150 B-ALS-200 B-ALS-250 B-ALS-300 B-ALS-400 B-ALS-600
list each 11.17 13.26 16.64 15.81 17.99 29.18 31.47 38.83 93.68
B-BR-75 B-BR-100 B-BR-125 B-BR-150 B-BR-200 B-BR-250 B-BR-300 B-BR-400 B-BR-500 B-BR-600
25.72 31.25 41.31 45.01 54.84 78.74 105.87 150.20 372.73 456.12
Ductile Iron
PART B 316 Stainless
npt size
part number
list each
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
B-316-75 B-316-100 B-316-125 B-316-150 B-316-200 B-316-250 B-316-300 B-316-400 B-316-500 B-316-600
23.93 35.27 49.81 57.70 69.16 83.70 116.95 174.82 293.52 410.81
304 Stainless
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
B-SS-75 B-SS-100 B-SS-125 B-SS-150 B-SS-200 B-SS-250 B-SS-300 B-SS-400 B-SS-500 B-SS-600
Aluminum
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
B-AL-75 B-AL-100 B-AL-125 B-AL-150 B-AL-200 B-AL-250 B-AL-300 B-AL-400 B-AL-500 B-AL-600 B-AL-800
23.56 28.32 39.88 44.98 55.08 72.10 101.27 150.04 245.72 356.44 11.15 13.04 17.48 16.58 18.76 29.36 32.10 40.23 87.23 97.47 402.92
1-1/2 2 3 4 5
B-DI-150 B-DI-200 B-DI-300 B-DI-400 B-DI-500
33.61 38.84 63.23 84.89 117.21
3/4 1 1-1/4 1-1/2 2 3 4
B-PP-75 B-PP-100 B-PP-125 B-PP-150 B-PP-200 B-PP-300 B-PP-400
10.06 10.81 14.42 15.94 18.80 30.53 55.35
Poly-Glass
PART C (for use with sleeves or bands) 316 Stainless
hose size
part number
list each
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
C-316-75 C-316-100 C-316-125 C-316-150 C-316-200 C-316-250 C-316-300 C-316-400 C-316-500 C-316-600
22.01 31.55 47.99 50.46 69.30 94.81 113.42 177.22 383.07 431.93
304 Stainless
npt size
part number
list each
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
C-SS-75 C-SS-100 C-SS-125 C-SS-150 C-SS-200 C-SS-250 C-SS-300 C-SS-400 C-SS-500 C-SS-600 C-SS-800
20.52 26.99 40.52 47.11 61.17 87.10 117.32 173.60 320.11 377.58 1148.74
Aluminum
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
C-AL-75 C-AL-100 C-AL-125 C-AL-150 C-AL-200 C-AL-250 C-AL-300 C-AL-400 C-AL-500 C-AL-600 C-AL-800
9.99 11.81 18.02 16.57 18.98 28.56 33.24 49.25 91.09 113.76 419.08
Aluminum (with stainless handles) 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6
Brass
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
C-ALS-75 C-ALS-100 C-ALS-125 C-ALS-150 C-ALS-200 C-ALS-250 C-ALS-300 C-ALS-400 C-ALS-600
9.86 11.37 17.24 15.86 18.40 27.63 32.88 47.60 109.93
C-BR-75 C-BR-100 C-BR-125 C-BR-150 C-BR-200 C-BR-250 C-BR-300 C-BR-400 C-BR-500 C-BR-600
24.64 33.87 42.42 46.08 63.07 82.74 114.95 167.03 391.63 516.17
Ductile Iron
1-1/2 2 3 4 5
C-DI-150 C-DI-200 C-DI-300 C-DI-400 C-DI-500
34.25 41.89 68.66 97.97 148.90
3/4 1 1-1/4 1-1/2 2 3 4
C-PP-75 C-PP-100 C-PP-125 C-PP-150 C-PP-200 C-PP-300 C-PP-400
10.25 11.65 15.19 16.97 19.85 30.14 56.92
Poly-Glass
19
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
Ductile Iron
PART D 316 Stainless
npt size
part number
list each
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
D-316-75 D-316-100 D-316-125 D-316-150 D-316-200 D-316-250 D-316-300 D-316-400 D-316-500 D-316-600
24.13 34.88 50.97 60.67 72.41 96.04 118.94 187.60 350.44 393.34
304 Stainless
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
D-SS-75 D-SS-100 D-SS-125 D-SS-150 D-SS-200 D-SS-250 D-SS-300 D-SS-400 D-SS-500 D-SS-600
Aluminum
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
D-AL-75 D-AL-100 D-AL-125 D-AL-150 D-AL-200 D-AL-250 D-AL-300 D-AL-400 D-AL-500 D-AL-600 D-AL-800
23.63 28.96 41.83 50.06 60.84 86.51 116.56 171.32 288.08 346.86 11.47 13.09 18.58 17.28 20.29 30.36 33.12 45.73 82.79 103.89 396.30
Aluminum (with stainless handles) 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6
Brass
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
20
D-ALS-75 D-ALS-100 D-ALS-125 D-ALS-150 D-ALS-200 D-ALS-250 D-ALS-300 D-ALS-400 D-ALS-600
11.67 12.81 18.19 16.54 19.59 29.62 31.52 43.78 99.04
D-BR-75 D-BR-100 D-BR-125 D-BR-150 D-BR-200 D-BR-250 D-BR-300 D-BR-400 D-BR-500 D-BR-600
25.92 31.42 46.64 45.97 57.57 81.88 104.54 159.55 341.34 462.11
Brass
npt size
part number
list each
npt size
part number
list each
1-1/2 2 3 4 5
D-DI-150 D-DI-200 D-DI-300 D-DI-400 D-DI-500
34.23 53.26 66.79 97.53 134.56
3/4 1 1-1/4 1-1/2 2 3 4
D-PP-75 D-PP-100 D-PP-125 D-PP-150 D-PP-200 D-PP-300 D-PP-400
10.72 11.65 15.26 16.53 19.75 33.96 59.56
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
E-BR-75 E-BR-100 E-BR-125 E-BR-150 E-BR-200 E-BR-250 E-BR-300 E-BR-400 E-BR-500 E-BR-600
17.96 18.98 27.24 33.60 48.03 69.93 97.77 149.97 351.02 474.41
1-1/2 2 3 4 5
E-DI-150 E-DI-200 E-DI-300 E-DI-400 E-DI-500
19.69 32.53 55.49 76.20 123.84
3/4 1 1-1/4 1-1/2 2 3 4
E-PP-75 E-PP-100 E-PP-125 E-PP-150 E-PP-200 E-PP-300 E-PP-400
3.71 4.39 6.24 6.33 6.72 13.04 25.88
Poly-Glass
Ductile Iron
PART E (for use with sleeves or bands) 316 Stainless
hose size
part number
list each
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
E-316-75 E-316-100 E-316-125 E-316-150 E-316-200 E-316-250 E-316-300 E-316-400 E-316-500 E-316-600
12.99 23.28 34.84 39.11 55.92 83.39 106.95 161.32 299.83 401.65
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
E-SS-75 E-SS-100 E-SS-125 E-SS-150 E-SS-200 E-SS-250 E-SS-300 E-SS-400 E-SS-500 E-SS-600
12.19 17.56 26.38 32.30 48.64 70.51 98.81 149.36 253.89 347.44
304 Stainless
Aluminum
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
E-AL-75 E-AL-100 E-AL-125 E-AL-150 E-AL-200 E-AL-250 E-AL-300 E-AL-400 E-AL-500 E-AL-600 E-AL-800
5.65 6.21 9.39 7.40 9.69 16.95 19.50 32.84 70.28 82.60 263.90
Poly-Glass
PART F 316 Stainless
npt size
part number
list each
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
F-316-75 F-316-100 F-316-125 F-316-150 F-316-200 F-316-250 F-316-300 F-316-400 F-316-500 F-316-600
16.43 26.58 39.06 46.63 59.01 79.66 105.35 177.76 305.49 412.24
304 Stainless
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
F-SS-75 F-SS-100 F-SS-125 F-SS-150 F-SS-200 F-SS-250 F-SS-300 F-SS-400 F-SS-500 F-SS-600
16.53 20.76 30.31 37.75 47.21 66.55 93.75 163.08 264.04 358.34
continued on next page
C PART F (continued from previous page)
Aluminum
npt size
part number
list each
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
F-AL-75 F-AL-100 F-AL-125 F-AL-150 F-AL-200 F-AL-250 F-AL-300 F-AL-400 F-AL-500 F-AL-600 F-AL-800
6.32 6.64 10.94 8.16 10.24 19.89 20.55 30.35 68.88 74.24 291.30
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
F-BR-75 F-BR-100 F-BR-125 F-BR-150 F-BR-200 F-BR-250 F-BR-300 F-BR-400 F-BR-500 F-BR-600
16.12 19.97 30.06 33.00 46.74 72.19 101.42 139.59 300.59 416.71
Brass
Ductile Iron
1-1/2 2 3 4 5
F-DI-150 F-DI-200 F-DI-300 F-DI-400 F-DI-500
22.03 27.49 43.50 68.34 105.91
3/4 1 1-1/4 1-1/2 2 3 4
F-PP-75 F-PP-100 F-PP-125 F-PP-150 F-PP-200 F-PP-300 F-PP-400
3.71 4.12 5.82 6.17 6.72 14.34 25.88
Poly-Glass
PART DC 316 Stainless size
part number
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
DC-316-75 DC-316-100 DC-316-125 DC-316-150 DC-316-200 DC-316-250 DC-316-300 DC-316-400 DC-316-500 DC-316-600
list each 21.44 28.94 39.58 45.00 54.89 70.02 91.88 127.34 251.37 335.90
304 Stainless size 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
part number DC-SS-75 DC-SS-100 DC-SS-125 DC-SS-150 DC-SS-200 DC-SS-250 DC-SS-300 DC-SS-400 DC-SS-500 DC-SS-600
Aluminum
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
DC-AL-75 DC-AL-100 DC-AL-125 DC-AL-150 DC-AL-200 DC-AL-250 DC-AL-300 DC-AL-400 DC-AL-500 DC-AL-600 DC-AL-800
list each 20.13 23.23 33.54 36.02 43.79 61.87 86.96 119.04 220.14 274.93 10.64 11.43 19.16 14.75 17.11 23.54 29.02 35.97 61.77 89.09 367.91
Aluminum (with stainless handles) 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6
Brass
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
DC-ALS-75 DC-ALS-100 DC-ALS-125 DC-ALS-150 DC-ALS-200 DC-ALS-250 DC-ALS-300 DC-ALS-400 DC-ALS-600 DC-BR-75 DC-BR-100 DC-BR-125 DC-BR-150 DC-BR-200 DC-BR-250 DC-BR-300 DC-BR-400 DC-BR-500 DC-BR-600
Ductile Iron
1-1/2 2 3 4 5
DC-DI-150 DC-DI-200 DC-DI-300 DC-DI-400 DC-DI-500
Poly-Glass
3/4 1 1-1/4 1-1/2 2 3 4
DC-PP-75 DC-PP-100 DC-PP-125 DC-PP-150 DC-PP-200 DC-PP-300 DC-PP-400
10.44 11.19 17.72 14.12 16.18 22.21 27.12 34.69 83.50 24.30 29.08 37.87 42.76 49.91 60.82 92.28 128.27 286.96 336.97 28.57 32.37 53.89 73.63 106.06 10.00 10.95 14.10 15.32 18.39 29.90 48.92
PART DP 316 Stainless size
part number
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6
DP-316-75 DP-316-100 DP-316-125 DP-316-150 DP-316-200 DP-316-250 DP-316-300 DP-316-400 DP-316-600
304 Stainless
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6
DP-SS-75 DP-SS-100 DP-SS-125 DP-SS-150 DP-SS-200 DP-SS-250 DP-SS-300 DP-SS-400 DP-SS-600
Aluminum
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
Brass
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6
8.84 10.72 18.82 21.07 30.89 47.84 53.83 90.49 228.42 5.23 5.59 6.51 5.57 6.61 13.21 12.66 20.29 40.14 44.00
DP-BR-75 DP-BR-100 DP-BR-125 DP-BR-150 DP-BR-200 DP-BR-250 DP-BR-300 DP-BR-400 DP-BR-500 DP-BR-600
14.03 17.05 20.00 21.17 29.44 41.49 50.26 78.06 203.95 240.01
DP-DI-150 DP-DI-200 DP-DI-300 DP-DI-400 DP-DI-500
Poly-Glass
3/4 1 1-1/4 1-1/2 2 3 4
9.72 13.63 23.00 27.70 37.35 54.93 62.61 107.27 274.80
DP-AL-75 DP-AL-100 DP-AL-125 DP-AL-150 DP-AL-200 DP-AL-250 DP-AL-300 DP-AL-400 DP-AL-500 DP-AL-600
Ductile Iron
1-1/2 2 3 4 5
list each
DP-PP-75 DP-PP-100 DP-PP-125 DP-PP-150 DP-PP-200 DP-PP-300 DP-PP-400
15.46 20.06 27.52 41.25 70.55 3.47 3.77 4.31 4.56 5.82 11.22 20.30
21
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
TYPE A SWIVEL ADAPTER Aluminum
npt size
part number
3 4
ASV-AL-300 ASV-AL-400
list each 254.32 388.56
TYPE D SWIVEL COUPLING Aluminum
part number
3 4
DSV-AL-300 DSV-AL-400
list each 332.04 494.52
SPOOL ADAPTER 316 Stainless
adapter x adapter
part number
1 X 1 AA-316-100 1-1/2 X 1-1/2 AA-316-150 1-1/2 X 2 AA-316-1520 2 X 2 AA-316-200 2 X 3 AA-316-2030 3 X 3 AA-316-300 3 X 4 AA-316-3040 4 X 4 AA-316-400
Aluminum
list each 85.10 118.00 140.65 148.89 192.67 258.40 320.46 401.38
1 X 1 AA-AL-100 1-1/2 X 1-1/2 AA-AL-150 2 X 2 AA-AL-200 2 X 2.5 AA-AL-2025 2 X 3 AA-AL-2030 2-1/2 X 2-1/2 AA-AL-250 3 X 3 AA-AL-300 3 X 4 AA-AL-3040 4 X 4 AA-AL-400 4 X 6 AA-AL-4060 6X 6 AA-AL-600
18.03 21.37 24.47 31.01 34.73 36.82 48.35 62.50 64.73 114.11 114.11
1-1/2 X 1-1/2 AA-BR-150 2 X 2 AA-BR-200 2-1/2 X 2-1/2 AA-BR-250 3 X 3 AA-BR-300 4 X 4 AA-BR-400
73.99 103.18 151.62 232.20 300.81
Brass
DOUBLE D 316 Stainless
coupler size
part number
1-1/2 X 1-1/2 DD-316-150 2 X 2 DD-316-200 3 X 3 DD-316-300 4 X 4 DD-316-400
Aluminum
22
316 Stainless
1-1/2 X 1-1/2 DD-AL-150 2 X 2 DD-AL-200 2 X 3 DD-AL-2030 3 X 3 DD-AL-300 3 X 4 DD-AL-3040 4 X 4 DD-AL-400 6 X 6 DD-AL-600
list each 149.61 193.05 301.67 414.10 58.67 69.86 109.14 98.17 136.58 128.21 361.94
Aluminum
list each
coupler x hose
part number
list each
DA-316-2015 DA-316-2030 DA-316-3020 DA-316-4030 DA-316-6040
223.00 220.98 229.55 338.28 606.81
3 X 2 3 X 4 4 X 3
C-AL-3020 C-AL-3040 C-AL-4030
69.75 106.44 95.17
1-1/2 X 1 1-1/2 X 2 2 X 1-1/2 2 X 3 2 X 4 3 X 1-1/2 3 X 2 3 X 4 4 X 2 4 X 3 4 X 6 6 X 4 6X5
DA-AL-1510 DA-AL-1520 DA-AL-2015 DA-AL-2030 DA-AL-2040 DA-AL-3015 DA-AL-3020 DA-AL-3040 DA-AL-4020 DA-AL-4030 DA-AL-4060 DA-AL-6040 DA-AL-6050
54.12 58.56 55.63 55.27 97.88 79.00 67.60 88.65 92.90 90.83 167.62 195.89 234.30
2 X 3 3 X 2 4 X 2 4 X 3 6 X 4
DA-BR-2030 DA-BR-3020 DA-BR-4020 DA-BR-4030 DA-BR-6040
182.20 235.73 335.15 335.52 745.32
coupler x adapter
part number
2 X 1-1/2 2X3 3 X 2 4 X 3 6 X 4
Aluminum
npt size
JUMP SIZE C (for use with sleeves or bands)
JUMP SIZE COUPLER X ADAPTER
Brass
JUMP SIZE A Aluminum
adapter x part female npt number 2 X 3 3 X 2 3 X 4 4 X 3 4 X 6 6 X 4
A-AL-2030 A-AL-3020 A-AL-3040 A-AL-4030 A-AL-4060 A-AL-6040
list each 41.24 40.66 69.91 63.74 161.93 161.93
JUMP SIZE B Aluminum
coupler x male npt
part number
list each
1-1/2 X 1 2 X 1-1/2 3 X 2 3 X 4 4 X 3
B-AL-1510 B-AL-2015 B-AL-3020 B-AL-3040 B-AL-4030
76.26 52.39 61.05 105.73 104.41
Stainless Steel
coupler x hose
part number
list each
3 X 2-1/2
C-316-3025
210.11
coupler x female npt
part number
list each
1-1/2 X 1 2 X 1-1/2 3 X 2 4 X 3
D-AL-1510 D-AL-2015 D-AL-3020 D-AL-4030
52.33 53.31 67.64 100.97
JUMP SIZE D Aluminum
JUMP SIZE E (for use with sleeves or bands) Aluminum
adapter x hose
part number
list each
2 X 1-1/2 2 X 2-1/2 2 X 3 3 X 2 3 X 2-1/2 3 X 4 4 X 2 4 X 3
E-AL-2015 E-AL-2025 E-AL-2030 E-AL-3020 E-AL-3025 E-AL-3040 E-AL-4020 E-AL-4030
19.35 24.96 28.47 35.21 38.37 46.69 43.23 53.92
Stainless Steel
coupler x hose
part number
list each
3 X 2-1/2
E-316-3025
164.37
adapter x male npt
part number
list each
3 X 1-1/2 3 X 2 3 X 4
F-AL-3015 F-AL-3020 F-AL-3040
56.80 51.94 75.20
JUMP SIZE F Aluminum
C GASKET
LOCKING HANDLE KIT Ring/Pin/Lock: Stainless Handle: Investment Cast Stainless size
part number
list each
1 1-1/4 1-1/2 2 3 4
LHRPSS-100 LHRPSS-200 LHRPSS-200 LHRPSS-200 LHRPSS-300 LHRPSS-300
20.60 22.74 22.74 22.74 29.69 29.69
HANDLE, RING AND PIN Ring/Pin: Stainless Handle: Investment Cast Stainless size
part number
list each
3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
HRPSS-75 HRPSS-100 HRPSS-200 HRPSS-200 HRPSS-200 HRPSS-200 HRPSS-300 HRPSS-300 HRPSS-300 HRPSS-600 HRPSS-600
4.59 4.68 12.97 12.97 12.97 12.97 16.56 16.56 16.56 46.13 46.13
Ring/Pin: Steel Handle: Forged Brass 3/4 1 1-1/4 1-1/2 1 2-1/2 3 4 6 8
HRPB-75 HRPB-100 HRPB-200 HRPB-200 HRPB-200 HRPB-200 HRPB-300 HRPB-400 HRPB-600 HRPB-600
5.22 7.60 8.39 8.39 8.39 8.39 11.20 11.57 44.24 44.24
Buna-N size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
BG-50 BG-75 BG-100 BG-125 BG-150 BG-200 BG-250 BG-300 BG-400 BG-500 BG-600 BG-800
0.95 0.95 0.95 1.08 1.08 1.08 1.30 1.45 1.99 4.36 5.20 24.23
VG-75 VG-100
7.38 8.56
FKM-50 FKM-75 FKM-100 FKM-125 FKM-150 FKM-200 FKM-250 FKM-300 FKM-400
3.95 7.38 8.56 10.09 13.92 14.25 16.81 18.51 34.00
Viton®
3/4 1
FKM
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
Teflon® (Teflon® Encapsulated Viton®) 1 1-1/2 2 2-1/2 3 4
TG-100 TG-150 TG-200 TG-250 TG-300 TG-400
41.29 53.99 61.27 61.27 69.94 96.65
CAMLOCK LOCKPINS Plated Steel size
part number
list each
1/2 - 5 6-8
C&G-LOCKPIN 2 C&G-LOCKPIN 6
0.32 1.10
23
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
24
Campbell Fittings
D
25
D Couplings for High-Pressure Air and Steam Hose VITON® SEAL GROUND JOINT COUPLINGS, AIR HAMMER COUPLINGS, AND MALE STEMS
Campbell Crimpnology™ offers hose assembly systems for your high-pressure steam and air applications.
Smooth End Detail
Features & Benefits • • •
Viton® Seal Couplings pass 1000 hour MIL-H-29210 steam test. Eliminates leaks with hand-tightened nut. DuPont Viton® seal on hose stem is formulated for high pressure steam and air applications. Interchangeable with old-style ground joint couplings. Machined from carbon steel, cast ductile iron (meets ASTM A395 specification), and 316 stainless steel. *See picture on right.
• •
Interlock Groove
STAKED-ON FERRULE FOR STEAM HOSE
Viton O-Ring
Stem Permanentlyattached Ferrule
Spud
Features & Benefits • • • • • •
Designed specifically for certain hose brands. Check with factory for information. Viton® Seal Couplings pass 1000 hour MIL-H-29210 steam test. Crimped steam assemblies eliminate the need for retightening bolts. Eliminates leaks and cuts costs caused by leaky clamps. Ferrule serrations bite to the wire achieving electrical continuity. Meets 250 PSI pressure rating for steam applications.
SWIVEL INTERLOCKING MALE STEM
Features & Benefits
Low Profile Swivel Nut
• •
Steam Hose
Designed for use with steam. Available with staked-on ferrule for crimped steam applications.
HEATWAVE GROUND JOINT COUPLING SYSTEM Features & Benefits • • • The Wave
Engineered to solve hose retention safety issues created by excessively high temperatures. One piece coupling/ferrule design. Machined ferrule utilizes a wave pattern, which gently displaces the hose evenly while pressing the tube into the coupling serrations. Recommended Use •
Install one length of HeatWave Hose System at the compressor outlet to dissipate heat. Then attach standard crimped air hoses from the HeatWave System to the tools. *See drawing below.
HeatWave Couplings
Viton® Seal Groud Joint Couplings & Ferrules
COMPRESSOR
TOOL
INTERLOCKING U-BOLT CLAMPS Features & Benefits • • • •
360° design wraps completely around hose for superior retention. Clamps fit hoses tightly without cracking, eliminating costly rework. Bolts on “up side” allow easier tightening/retightening and improve “dragability”. Field repairable. MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Components
26
Hose Size
Fitting/Coupling
Attachment
Hose Type
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
Viton® Ground Joint/Air Hammer/Male Stem
U-Bolt Clamp
Steam
1500
1250
1250
1250
1250
1250
800
500
500
300
Viton® Ground Joint/Air Hammer/Male Stem
Long Ferrule
Rubber
1000
1000
1000
1000
1000
1000
650
500
500
-
HeatWave Coupling/HW Male
Staked-on Ferrule
Rubber
-
-
-
-
-
call
-
call
-
-
See footnotes 1 and 2 on Page 1
D
VITON® SEAL GROUND JOINT COUPLINGS
VITON® SEAL HOSE STEM
(staked-on ferrule & low profile nut)
Steel
DISTRIBUTOR AUTHORIZATION Safety is of paramount concern to everyone. Due to the volatile nature of steam, and in accordance with our ISO 9001 quality system, we reserve the right to restrict sales of our Ground Joint Viton® Seal Couplings to only those distributors authorized by Campbell Fittings. Please contact our Customer Service department for more information.
Steel/Ductile Iron part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
RGJF-2 RGJF-3 RGJF-4 RGJF-5 RGJF-6 RGJF-8 RGJF-10 RGJF-12 RGJF-16
43.65 47.25 48.81 93.10 89.57 109.19 227.51 262.20 497.45
316 Stainless
1/2 3/4 1
RGJFSS-2 RGJFSS-3 RGJFSS-4
272.88 225.89 246.75
FEMALE SET Steel/Ductile Iron
hose size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
GJF-2 GJF-3 GJF-4 GJF-5 GJF-6 GJF-8 GJF-10 GJF-12 GJF-16
42.20 47.43 48.57 93.36 89.57 106.47 219.77 262.20 497.45
1/2 3/4 1 1-1/2 2
IMS-2** IMS-3** IMS-4** IMS-6** IMS-8**
33.78 32.44 48.30 POR 200.70
POR 188.12 POR
3/4 1
RGJS-2** RGJS-3** RGJS-4** RGJS-6** RGJS-8** RGJSS-2** RGJSS-3** RGJSS-4**
VITON® SEAL COMPLETE SET
(staked-on ferrule, low profile nut, & spud)
Steel
hose size
part number
list each
1/2 3/4 1 1-1/2 2
RGJF-2** RGJF-3** RGJF-4** RGJF-6** RGJF-8**
66.03 64.74 74.29 POR 275.65
RGJSS-3**
POR
VITON® SEAL HOSE STEM (staked-on ferrule & wing nut) Steel
hose size
part number
list each
1/2 3/4 1 1-1/2 2
GJS-2** GJS-3** GJS-4** GJS-6** GJS-8**
50.74 53.42 61.15 POR 245.19
VITON® SEAL COMPLETE SET
(staked-on ferrule, low profile nut, & wing nut)
Steel
(with wing nut)
49.35 53.63 61.61 POR 246.09
1/2 3/4 1 1-1/2 2
3/4
hose size
list each
list each
316 Stainless
FEMALE SET
(with low-profile nut)
part number
part number
316 Stainless
Steel
hose size
hose size
1/2 3/4 1
INTERLOCKING MALE STEM
(with staked-on ferrule)
hose size
part number
list each
1/2 3/4 1 1-1/2 2
GJF-2** GJF-3** GJF-4** GJF-6** GJF-8**
66.04 66.29 74.29 POR 274.98
**Contact Customer Service for part numbers, prices, and availability
316 Stainless IMSS-3** IMSS-4**
148.73 POR
SWIVEL MALE STEM
(with staked-on ferrule for use with steam)
Steel
hose size
part number
list each
3/4 1
IMS-3**SW IMS-4**SW
90.46 90.98
316 Stainless
3/4
IMSS-3**SW
197.68
HEATWAVE FEMALE SET
(staked-on ferrule & wing nut)
Steel/Ductile Iron
hose size
part number
list each
2 3
GJF-8 HW 247.16 GJF-12 HW 571.28
HEATWAVE MALE STEM
(with staked-on ferrule)
Steel/Ductile Iron hose size
part number
list each
2 3
IMS-8 HW 164.07 IMS-12 HW 422.95
Viton® should never be used with ammonia.. Please contact our Engineering department for information on all our different gasket materials.
27
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
INTERLOCKING MALE STEM Steel
npt x hose
part number
list each
1/2 1/2 X 3/4 3/4 X 1/2 3/4 3/4 X 1 1 X 3/4 1
IMS-2 IMS-2X3 IMS-3X2 IMS-3 IMS-3X4 IMS-4X3 IMS-4
8.19 18.51 22.89 12.08 26.43 25.54 16.27
Machined Ductile Iron
1-1/4 1-1/2 2 2-1/2 3 4
IMS-5 IMS-6 IMS-8 IMS-10 IMS-12 IMS-16
29.56 32.53 43.50 75.75 99.45 162.34
316 Stainless
1/2 3/4 1
IMSS-2 IMSS-3 IMSS-4
71.83 70.05 72.47
SWIVEL MALE STEM
VITON® SEAL MALE END (Viton® Seal x male npt) Plated Steel
MALE SPUD Steel
npt size
part number
list each
3/4 1 1-1/2 2
GJMS-3 GJMS-4 GJMS-6 GJMS-8
54.70 55.70 92.65 98.40
3/4 1
GJMSS-3 GJMSS-4
289.95 289.95
316 Stainless
VITON® SEAL FEMALE END (Viton® Seal x female npt) Plated Steel
npt size
part number
list each
3/4 3 4
GJFS-3 GJFS-12 GJFS-16
71.46 173.81 POR
FEMALE SPUD
(for use with steam)
Steel
Plated Steel
hose size
part number
list each
3/4
IMS-3SW
49.14
npt size
part number
list each
1/2 3/4 1
GFS-2 GFS-3 GFS-4
21.05 15.88 16.21
Machined Ductile Iron
VITON® SEAL HOSE STEM Steel
hose size
part number
list each
1/2 3/4 1
GJS-2 GJS-3 GJS-4
12.63 20.74 21.35
Machined Ductile Iron
1-1/4 1-1/2 2 2-1/2 3 4
GJS-5 GJS-6 GJS-8 GJS-10 GJS-12 GJS-16
316 Stainless
1/2 3/4 1
28
GJSS-2 GJSS-3 GJSS-4
33.49 33.80 42.88 67.03 106.75 192.44 118.16 84.05 112.15
1-1/4 1-1/2 2 2 X 3/4 2-1/2 3 4
GFS-5 GFS-6 GFS-8 GFS-8X3 GFS-10 GFS-12 GFS-16
36.72 35.80 40.74 62.28 90.58 94.68 171.89
1/2 3/4 1
GFSS-2 GFSS-3 GFSS-4
98.26 73.30 76.29
316 Stainless
npt size
part number
list each
1/2 3/4 1
GMS-2 GMS-3 GMS-4
26.57 24.11 25.04
Machined Ductile Iron
1-1/4 1-1/2 2 2-1/2 3
GMS-5 GMS-6 GMS-8 GMS-10 GMS-12
DOUBLE SPUD Steel size
part number
list each
1/2 3/4 1
GDS-2 GDS-3 GDS-3
39.59 37.49 37.49
Machined Ductile Iron
1-1/4 1-1/2 2 2-1/2 3
GDS-5 GDS-5 GDS-8 GDS-10 GDS-12
67.38 67.38 71.05 138.92 147.78
SOCKET WELD SPUD 316 Stainless size
part number
list each
3/4 1
GWSS-3 GWSS-4
98.77 101.62
LOW PROFILE NUT Machined Ductile Iron size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
RGN-2 RGN-3 RGN-3 RGN-5 RGN-5 RGN-8 RGN-10 RGN-12 RGN-16
9.68 11.26 11.26 21.53 21.53 22.58 74.86 71.03 185.35
316 Stainless
All steel and machined ductile iron parts are zinc plated. DuPont Viton® is the best O-Ring material for couplings used in both Air and Steam applications. For special applications, O-Rings of other materials are available upon request.
55.08 57.04 57.97 134.85 141.81
1/2 3/4 1
RGNSS-2 RGNSS-3 RGNSS-3
102.69 115.38 115.38
D WING NUT Machined Ductile Iron size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
GN-2 GN-3 GN-3 GN-5 GN-5 GN-8 GN-10 GN-12 GN-16
7.32 11.23 11.23 21.35 21.35 22.20 74.43 70.34 179.95
LOW PROFILE SWIVEL NUT
HEAVY DUTY VITON® SEAL AIR HAMMER COUPLINGS
Ductile Iron
part number
list each
3/4 1
GDC-3 GDC-3
63.29 63.29
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
VO-2 VO-3 VO-3 VO-5 VO-5 VO-8 VO-10 VO-12 VO-16
1.19 1.40 1.40 2.57 2.57 3.54 5.42 7.45 8.23
list each
3/4 1
RHN-3 RHN-3
18.29 18.29
Ductile Iron
VITON® SEAL FEMALE SET (with low profile nut) Steel/Ductile Iron
VITON® O-RING size
part number
WING NUT
DEAD-END size
size
hose size
part number
list each
3/4 1
RHJF-3 RHJF-4
72.90 65.99
size
part number
list each
3/4 1
HN-3 HN-3
16.78 16.78
DOUBLE SPUD Steel size
part number
list each
3/4 1
HDS-3 HDS-3
42.26 84.91
FEMALE SPUD VITON SEAL FEMALE SET (with wing nut) ®
Steel/Ductile Iron hose size
part number
list each
3/4 1
HJF-3 HJF-4
74.86 65.62
part number
list each
3/4 1
HFS-3 HFS-4
31.22 27.24
npt size
part number
list each
3/4 1
HMS-3 HMS-4
43.32 40.65
MALE SPUD Steel
VITON® SEAL HOSE STEM Steel
Steel
npt size
hose size
part number
list each
3/4 1
HJS-3 HJS-4
25.34 20.07
VITON® SEAL FEMALE END (Viton® Seal x female npt) Steel size
part number
list each
3/4
HJFS-3
97.25
29
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
INTERLOCKING U-BOLT CLAMPS
SINGLE U-BOLT hose hose hose o.d. min o.d. max size
part number
list each
13/16 1-1/16 1-3/32
IC-2 IC-3S IC-3
11.11 14.15 16.38
hose hose hose o.d. min o.d. max size
part number
list each
1-5/16 1-1/2 1-9/16 1-15/16 2-3/16 2-11/32 2-11/16 3 3-9/32
1 1 1-1/4 1-1/2 1-1/2 2 2 2-1/2 2-1/2
IC-4 IC-4L IC-5 IC-6 IC-6L IC-8 IC-8L IC-10 IC-10L
24.77 22.55 37.58 37.47 37.43 44.88 41.91 60.08 73.53
hose hose hose o.d. min o.d. max size
part number
list each
3-5/16 3-11/16 4-1/16 4-5/16 4-11/16 5-1/16 7-11/16
IC-12S IC-12 IC-12L IC-16S IC-16 IC-16L IC-24L
105.57 101.48 134.60 252.53 340.78 440.86 543.29
1-1/32 1-1/4 1-3/8
1/2 3/4 3/4
DOUBLE U-BOLT
CASTING
1-1/2 1-11/16 2 2-3/16 2-3/8 2-11/16 2-15/16 3-9/32 3-9/16
TRIPLE U-BOLT HOSE
FITTING
LINER
3-3/4 4-1/8 4-1/2 4-3/4 5-1/8 5-1/2 8-1/4
3 3 3 4 4 4 6
or your convenience, U-Bolts are available in bulk packages, upon request. F Bulk package price is the same as listed above. (IC-2 through IC-4L are packed 25 per carton. IC-5 through IC-8L are packed 10 per carton.)
WHIP CHEK™ SAFETY CABLE U-BOLT
This 2” 1000 psi rated hose exploded in a test at 5200 psi. The hose exceeded its minimum 4X safety factor. The fitting and clamp exceeded the capacity of the hose.
30
hose size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 3 4
WC-1 WC-1 WC-1 WC-2 WC-2 WC-2 WC-2 WC-4
28.80 28.80 28.80 45.01 45.01 45.01 45.01 109.55
Campbell Fittings
E
31
E Couplings & Safety Couplings for Air and Water Hose CAMPBELL SINGLE-LOCK (Bowes-style) DOUBLE-LOCK (Thor-style) COUPLINGS
Campbell Crimpnology™ offers hose assembly systems for all your air applications.
Features and Benefits • High strength Zamak alloy sleeves never rust, never seize or gall. • Crimpnology hose ends provide the ultimate in hose retention. • Interchangeable with other Bowes and Thor style couplings.
CAMPBELL SINGLE-LOCK (Nitrogen) DOUBLE-LOCK (Nitrogen) COUPLINGS
Nitrogen Kills! Nitrogen-only Single-Lock and Double-Lock Couplings.
Features and Benefits • High strength Zamak alloy sleeves never rust, never seize or gall. • Crimpnology hose ends provide the ultimate in hose retention.. • Interchangeable with other Bowes and Thor style couplings.
Specify the patented yellow ring! Simply the best and safest way to avoid deadly nitrogen accidents in plants.
SAFETY AND SAVINGS! UniversaLock™, Single-Lock and Double-Lock couplings meet OSHA regulation 29CFR1915.131 and MSHA 30 CFR65.13021 requirements for Air Hose Couplings. The fine for an unpinned/unlocked air hose coupling can be $800 or more per infraction. Save your customer money and headaches, by using Campbell’s Safety Air Hose Couplings.
Patented Nitrogen Ring
UL RECOGNIZED
Patent no. 5,779,277
UNIVERSAL COUPLINGS AND UNIVERSALOCK™ COUPLINGS Features and Benefits • Mates with domestic and imported Universal Couplings. • UniversaLock’s automatically lock onto mating coupling. • Crimpnology hose end for superior retention and sealing. • Cast ductile iron meets ASTM A536 specification. • Washers manufactured from nitrile for superior oil resistance. Investment Cast Universal Hose Ends • Investment casting provides a crisp, high quality, hose-end surface-finish, without costly machining. • Crimpnology hose ends for superior retention and sealing. Investment Cast Universal Hose Ends:
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) Hose System Components Fitting/Coupling
32
Attachment
SEE NOTE 1
Hose Size Hose Type
1/2
3/4
1 300*
UniversaLock™
Ferrule
Air
300*
300*
Universal
Ferrule
Air
150
150
150
Single-Lock Cplg
Ferrule
Air
300
300
300
Double-Lock Cplg
Ferrule
Air
300
300
300
See footnotes 1, 2 and 6 on Page 1 *Only when connected to another UniversaLock coupling
Short, Crimp Specific Shank
Standard Shank
E MALE NPT
UNIVERSAL COUPLINGS (includes safety clip)
Ductile Iron npt size
part number
list each
ctn qty
3/8 1/2 3/4 1
UM-38 UM-2 UM-3 UM-4
10.97 10.07 10.18 10.76
25 25 25 25
1/2 3/4 1
UMSS-2 UMSS-3 UMSS-4
65.31 56.60 60.85
25 25 25
316 Stainless
UNIVERSALOCK™ COUPLINGS
UNIVERSAL WASHER Nitrile HOSE END Ductile Iron (machined serrations) hose size
part number
list each
ctn qty
3/8 1/2 5/8 3/4 1
UH-38 UH-2 UH-58 UH-3 UH-4
11.96 8.75 13.02 8.70 13.23
25 25 25 25 25
Plated Steel (investment cast) 1/2 3/4 1
UH-2i UH-3i UH-4i
8.61 8.77 11.39
316 Stainless (machined serrations)
1/2 3/4 1
UHSS-2 UHSS-3 UHSS-4
64.82 54.48 60.24
25 25 25
part number
list each
ctn qty
3/4
UH-3C
7.35
25
FEMALE NPT npt size
part number
list each
ctn qty
3/8 1/2 3/4 1
UF-38 UF-2 UF-3 UF-4
11.13 10.23 10.25 12.06
25 25 25 25
1/2 3/4 1
UFSS-2 UFSS-3 UFSS-4
66.73 57.83 62.30
25 25 25
316 Stainless
list each
ctn qty
All
UG
0.93
25
HOSE END Ductile Iron (machined serrations)
CLIP Plated Steel size
part number
list each
ctn qty
All
CLIP
0.39
25
hose size
part number
list each
ctn qty
1/2 3/4 1
ULH-2 ULH-3 ULH-4
35.57 36.08 36.59
10 10 10
MALE END
IMPORT DUCTILE IRON UNIVERSAL COUPLINGS (includes safety clip)
Ductile Iron
hose size
part number
list each
ctn qty
1/2 3/4 1
HE-50 HE-75 HE-100
5.83 6.51 8.13
25 25 25
FEMALE NPT
hose size
Ductile Iron
part number
HOSE END 25 25 25
HOSE END (crimp specific) Plated Steel (investment cast)
size
npt size
part number
list each
ctn qty
1/4 1/2 3/4 1
FE-25 FE-50 FE-75 FE-100
6.89 6.72 7.03 7.80
25 25 25 25
MALE NPT npt size
part number
list each
ctn qty
1/4 1/2 3/4 1
ME-25 ME-50 ME-75 ME-100
6.82 6.54 6.90 7.77
25 25 25 25
npt size
part number
list each
ctn qty
1/2 3/4 1
ULM-2 ULM-3 ULM-4
35.63 36.08 35.91
10 10 10
FEMALE END Ductile Iron npt size
part number
list each
ctn qty
1/2 3/4
ULF-2 ULF-3
35.90 36.27
10 10
UNIVERSALOCK™ WASHER Nitrile size
part number
list each
ctn qty
All
ULW
3.20
25
Never use UniversaLock™ Washers in standard Universal Couplings.
33
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
FEMALE X MALE NPT
SINGLE-LOCK COUPLINGS (Bowes interchange)
Plated Steel
MALE X FEMALE NPT (with locking ring)
npt size
part number
list each
1/2 3/4 1
BFMS-2 BFMS-3 BFMS-4
22.77 22.77 27.43
BFMB-2 BFMB-3 BFMB-4
34.08 34.08 39.08
Brass
1/2 3/4 1
FEMALE X FEMALE NPT Plated Steel
MALE X HOSE Plated Steel
hose size
part number
list each
1/2 3/4
BMHS-2 BMHS-3
28.15 28.15
BMHB-2 BMHB-3
49.62 47.38
Brass
1/2 3/4
22.77 22.77 26.31
size
part number
list each
ALL
BGN-1
1.65
BFFB-2 BFFB-3 BFFB-4
34.08 34.08 39.19
Brass
1/2 3/4 1
Plated Steel
BMMS-2 BMMS-3
29.08 29.08
1/2 3/4 1
BMHS-2L BMHS-3L BMHS-4L
40.38 37.58 44.36
BMMB-2 BMMB-3
42.46 42.46
BMHB-2L BMHB-3L BMHB-4L
54.11 51.65 58.23
MALE X FEMALE NPT npt size
part number
list each
1/2 3/4
BMFS-2 BMFS-3
28.15 28.15
BMFB-2 BMFB-3
46.42 44.31
hose size
part number
list each
1/2 3/4
BFHS-2 BFHS-3
22.77 22.77
BFHB-2 BFHB-3
34.08 34.08
Brass
Brass
1/2 3/4 1
SINGLE-LOCK COUPLINGS (for Nitrogen use only)
Plated Steel
npt size
part number
list each
1/2 3/4 1
BMMS-2L BMMS-3L BMMS-4L
38.58 38.58 44.33
BMMB-2L BMMB-3L BMMB-4L
51.65 51.65 58.23
1/2 3/4 1
MALE X HOSE (with Nitrogen ring) Plated Steel
MALE X MALE NPT (with locking ring)
Brass
FEMALE X HOSE
34
BFFS-2 BFFS-3 BFFS-4
1/2 3/4
1/2 3/4
49.15 49.15 57.95
1/2 3/4 1
list each
Plated Steel
BMFB-2L BMFB-3L BMFB-4L
Brass
1/2 3/4 1
Nitrile
part number
1/2 3/4
41.79 41.79 48.05
list each
hose size
Brass
BMFS-2L BMFS-3L BMFS-4L
part number
list each
Plated Steel
1/2 3/4 1
npt size
part number
Brass
list each
GASKET
npt size
1/2 3/4
part number
MALE X HOSE (with locking ring)
MALE X MALE NPT Plated Steel
Plated Steel
npt size
hose size
part number
list each
1/2 3/4 1
BMHS-2N BMHS-3N BMHS-4N
38.83 38.83 43.50
BMHB-2N BMHB-3N BMHB-4N
52.06 52.06 58.66
Brass
1/2 3/4 1
E MALE X MALE NPT (with Nitrogen ring) Plated Steel
FEMALE X FEMALE NPT (with Nitrogen ring) Plated Steel
MALE NPT (without locking sleeve) Plated Steel
npt size
part number
list each
hose size
part number
list each
npt size
part number
list each
1/2 3/4 1
BMMS-2N BMMS-3N BMMS-4N
38.83 38.83 44.65
1/2 3/4
BFFS-2N BFFS-3N
22.97 22.97
1/2 3/4 1
TM-2 TM-3 TM-4
22.77 23.96 26.85
BFFB-2N BFFB-3N
34.35 34.35
Brass
1/2 3/4 1
BMMB-2N BMMB-3N BMMB-4N
38.83 38.83 58.66
MALE X FEMALE NPT (with Nitrogen ring) Plated Steel
npt size
part number
list each
1/2 3/4 1
BMFS-2N BMFS-3N BMFS-4N
38.83 38.83 44.65
BMFB-2N BMFB-3N BMFB-4N
52.06 52.06 58.66
Brass
1/2 3/4 1
part number
list each
1/2 3/4
BFHS-2N BFHS-3N
22.97 22.97
BFHB-2N BFHB-3N
34.35 34.35
1/2 3/4
FEMALE X MALE NPT (with Nitrogen ring) Plated Steel
list each
1/2 3/4
BFMS-2N BFMS-3N
22.97 22.97
Brass
1/2 3/4
part number
list each
1/2 3/4 1
TLH-2 TLH-3 TLH-4
41.50 43.85 66.81
Stainless
Brass
3/4
TLHSS-3
385.99
TLHB-3
97.42
34.35 34.35
Plated Steel
npt size
part number
list each
1/2 3/4 1
TF-2 TF-3 TF-4
29.00 29.15 31.77
part number
list each
1/2 3/4
TLM-2 TLM-3
39.04 39.04
Stainless
TLMSS-3
336.56
166.65
hose size
part number
list each
1/2 3/4 1
TLH-2L TLH-3L TLH-4L
55.62 58.76 89.51
MALE NPT (with locking ring) hose size
part number
list each
1/2 3/4 1
TLM-2L TLM-3L TLM-4L
52.33 52.33 73.11
FEMALE NPT (with locking ring) Plated Steel
FEMALE NPT Plated Steel
npt size
part number
list each
1/2 3/4
TLF-2 TLF-3
44.73 44.73
Stainless
3/4
TFSS-3
Plated Steel
npt size
3/4 BFMB-2N BFMB-3N
FEMALE NPT (without locking sleeve)
Plated Steel
hose size
3/4
166.65
HOSE END (with locking ring)
Plated Steel
part number
TMSS-3
Stainless
MALE NPT
hose size
Stainless
3/4
3/4
Plated Steel
hose size
Brass
DOUBLE-LOCK COUPLINGS (Thor interchange)
HOSE END
FEMALE X HOSE (with Nitrogen ring) Plated Steel
Brass
1/2 3/4
TLFSS-3
hose size
part number
list each
1/2 3/4 1
TLF-2L TLF-3L TLF-4L
59.92 59.92 73.11
322.08 35
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
DOUBLE-LOCK COUPLINGS (for Nitrogen use only)
MALE NPT (with Nitrogen ring & without locking sleeve) Plated Steel
npt size
part number
list each
1/2 3/4 1
TM-2N TM-3N TM-4N
28.72 30.14 33.80
FEMALE NPT (with Nitrogen ring & without locking sleeve) Plated Steel
HOSE END (with Nitrogen ring) Plated Steel
hose size
part number
list each
1/2 3/4 1
TLH-2N TLH-3N TLH-4N
55.62 58.76 89.64
TLHB-3N
POR
Brass
3/4
MALE NPT (with Nitrogen ring) Plated Steel
hose size
part number
list each
1/2 3/4 1
TLM-2N TLM-3N TLM-4N
52.33 52.33 73.11
FEMALE NPT (with Nitrogen ring) Plated Steel
36
hose size
part number
list each
1/2 3/4 1
TLF-2N TLF-3N TLF-4N
59.92 59.92 73.11
npt size
part number
list each
1/2 3/4 1
TF-2N TF-3N TF-4N
36.54 36.71 39.97
size
part number
list each
ALL
TGN-1
3.11
GASKET Nitrile
Campbell Fittings
F
37
F
Fittings & Couplings for High, Medium, and Low Pressure Chemical Hose CHEMJOINT™ COUPLINGS & MALE STEMS
Campbell Crimpnology™ offers hose assembly systems for all your chemical applications!
Description ChemJoint™ Couplings and Male Stems create an extremely versatile Chemical Hose assembly system. The system solves problematic Cam and Groove issues such as pressure, temperature, side load, viscosity, line dedication and ergonomics. Features and Benefits • Graduated serration pattern - sharper near the interlock, rounder near the end. Grips and seals plastic lined Chemical Hose without cutting through the tube. • 360° interlock groove on fitting locks ferrule into place for the ultimate in holding power. • Crimped assemblies are low profile and eliminate sharp edges from bands. • Viton® Seal allows coupling to meet pressure ratings with hand-tightened nut.
ChemJoint Couplings are available with weld ends for use with metal hose.
Recommended Hose Attachment • Interlocking ferrules • Preformed bands
1” ChemJoint™ Coupling Set
1” ChemJoint™ Union with Viton® Spud
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1 Hose System Components
Hose Size
Fitting/Coupling
Attachment
Hose Type
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
ChemJoint™/Male Stem
Ferrule
Chemical
350
400
450
325
250
250
225
225
200
ChemJoint™/Male Stem
Ferrule
Rubber
350
400
450
425
400
350
325
300
250
ChemJoint™ Weld-On and Union
None
Metal/None
-
800
800
-
650
600
-
600
-
See footnotes 1 and 2 on Page 1 38
F CHEMJOINT™ FEMALE VITON® SPUD
CHEMJOINT™ COUPLINGS
316 Stainless
npt size 3/4 1 1-1/2 2 3
part number CJVS-3 CJVS-4 CJVS-6 CJVS-8 CJVS-12
list each 154.58 147.38 216.70 294.75 569.84
316 Stainless with ACME threads
1 1-1/2 2 3
CJVS-4A CJVS-6A CJVS-8A CJVS-12A
163.63 238.77 322.09 625.27
CHEMJOINT™ HOSE STEM 316 Stainless
hose size 3/4 1 1-1/2 2 3
DISTRIBUTOR AUTHORIZATION Safety is of paramount concern to everyone. Due to the volatile nature of chemical hose applications, and in accordance with our ISO 9001 system, we reserve the right to restrict sales of our ChemJoint™ Couplings and Male Stems to only those distributors authorized by Campbell Fittings.
316 Stainless size
CHEMJOINT™ MALE STEM
3/4 1 1-1/2 2 3
316 Stainless hose size
part number
list each
1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
CJMS-2 CJMS-3 CJMS-4 CJMS-5 CJMS-6 CJMS-8 CJMS-10 CJMS-12 CJMS-16
47.99 47.99 57.57 67.16 74.83 82.51 130.50 168.44 248.88
part number CJSS-3 CJSS-4 CJSS-6 CJSS-8 CJSS-12
list each 370.35 359.24 458.65 611.18 1100.12
part number CJWS-3 CJWS-4 CJWS-6 CJWS-8 CJWS-12
list each 98.10 117.92 121.30 127.73 157.19
CHEMJOINT™ MALE THREADED STEM 316 Stainless
npt size 1 1-1/2 2 3
CHEMJOINT™ COUPLING FEMALE SET hose size 3/4 1 1-1/2 2 3
list each 130.97 127.73 128.30 137.55 190.57
CHEMJOINT™ WELD-ON STEM
Please contact our Customer Service department for more information
316 Stainless
part number CJHS-3 CJHS-4 CJHS-6 CJHS-8 CJHS-12
part number CJTS-4 CJTS-6 CJTS-8 CJTS-12
list each 127.73 131.38 137.55 190.57
CHEMJOINT™ UNION WITH VITON® SPUD 316 Stainless
npt size 3/4 1 1-1/2 2 3
part number CJFU-3 CJFU-4 CJFU-6 CJFU-8 CJFU-12
list each 623.65 687.25 704.39 911.49 1228.12
Viton® should never be used with ammonia.. Please contact our Engineering department for information on all our different gasket materials. 39
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
CHEMJOINT™ UNION (without Viton® Spud) 316 Stainless
316 Stainless
npt size 3/4 1 1-1/2 2 3
part number CJFS-3 CJFS-4 CJFS-6 CJFS-8 CJFS-12
list each 491.27 555.81 506.58 638.62 687.75
size 3/4 1 1-1/2 2 3
npt size
part number CJFS-3A CJFS-4A CJFS-6A CJFS-8A CJFS-12A
list each
npt size
316 Stainless with ACME threads
3/4 1 1-1/2 2 3
545.50 696.40 745.89 745.89 810.87
CHEMJOINT™ NUT 316 Stainless size 3/4 1 1-1/2 2 3
part number CJN-3 CJN-3 CJN-6 CJN-8 CJN-12
list each 100.38 100.38 133.97 206.29 389.07
npt size 1 1-1/2 2 3
part number CJN-4A CJN-6A CJN-8A CJN-12A
list each 109.63 146.95 222.50 429.46
316 Stainless with ACME threads
CHEMJOINT™ DUST CAP 316 Stainless size 3/4 1 1-1/2 2 3
part number CJDC-3 CJDC-3 CJDC-6 CJDC-8 CJDC-12
list each 98.26 98.26 174.08 191.91 393.02
part number CJDC-4A CJDC-6A CJDC-8A CJDC-12A
list each
316 Stainless with ACME threads
npt size
1 1-1/2 2 3
40
CHEMJOINT™ VITON® SEAL DUST PLUG
107.88 188.21 205.03 430.37
part number CJDP-3 CJDP-3 CJDP-6 CJDP-8 CJDP-12
list each 147.25 147.25 235.87 357.61 644.10
part number CJDP-4A CJDP-6A CJDP-8A CJDP-12A
list each
316 Stainless with ACME threads
1 1-1/2 2 3
161.39 255.34 387.33 697.62
Campbell Fittings
G
41
G Sanitary, Washdown, and PCT Couplings for Food and Beverage CRIMPNOLOGY 3A TRI-CLAMP FITTINGS, ADAPTERS & FERRULES
Campbell Crimpnology™ offers hose assembly systems for all your food grade hose applications!
TRI-CLAMP GASKETS Features & Benefits •
Features & Benefits • Campbell Crimpnology™ offers hose assembly systems for food grade hose applications. • Specially designed shank & ferrule lengths are matched for hose tube and cover protection. • Dedicated silicone bumper seat area on crimp hose fittings. • All products listed as 3A components are certified to meet 32 Ra minimum polish and all other 3A criteria under 3A RPSCQC. • Crimp specifications are provided for all hoses for proven performance (3A crimp process exception).
Materials compliant with FDA Code of Federal Regulations under Title 21.
TRI-CLAMPS Features & Benefits •
Designed for use with any Tri-Clamp fittings and adapters.
PROTECTIVE BUMPER Features & Benefits •
Fits into machined recessed bumper area on all Campbell Tri-Clamp Crimp Hose Fittings. Easy on/off installation. Manufactured from FDA approved silicone.
• •
WASHDOWN SWIVELS Features & Benefits •
Campbell Sanitary serration pattern
Ferrule interlock groove (for standard ferrules or machined ferrules)
360° swivel rotation between the threaded hex and hose barb for easy installation and smooth swiveling during wash down, eliminates hose kinking. Manufactured with 300 Series stainless steel
•
Bumper location
CRIMPNOLOGY WINE FITTINGS
Tri-Clamp end
Features & Benefits
Ferrule groove
(with Pacific Coast Threads - PCT) •
Crimp specs and procedures provided for all styles. For use with Campbell ferrules and sleeves or band clamps.
•
TESTING
All Campbell products are thoroughly tested to determine accurate performance data, such as pressure ratings and temperature derating data. See example of Tri-Clamp hydrostatic test below. Hose: 1” ContiTech Grey Vintner Working Pressure: 250 psi Test temp: 70°F Highest Test Pressure: 2039 psi. Failure Mode: Hose burst beyond 8x WP MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1 Hose System Componenets
42
Hose Size
Fitting/Coupling
Attachment
Hose Type
1
1-1/4
1-1/2
2
2-1/2
3
4
Tri-Clamp
Ferrule
Sanitary
500
-
450
350
325
300
call
Tri-Clamp
Mach. Ferrule
Sanitary
500
-
500
400
375
350
call
Wine Fitting
Ferrule
Sanitary
-
-
450
350
-
300
-
Wine Fitting
Band Clamps
Sanitary
-
-
100
100
-
50
-
See footnotes 1 and 2 on Page 1
G 3A FITTINGS & ADAPTERS
TRI-CLAMP X MALE NPT 316 Stainless
npt size 1 X 3/4 1X1 1-1/2 X 1-1/2 1-1/2 X 2 2 X 1-1/2 2X2 2-1/2 X 2 2-1/2 X 2-1/2 3X2 3X3 4X4
part number TCM-4X3 316 TCM-4 316 TCM-6 316 TCM-6X8 316 TCM-8X6 316 TCM-8 316 TCM-10X8 316 TCM-10 316 TCM-12X8 316 TCM-12 316 TCM-16 316
list each 105.97 105.97 105.97 143.80 143.80 148.33 189.20 208.87 280.03 280.03 302.73
TRI-CLAMP X FEMALE NPT 3A TRI-CLAMP CRIMP HOSE FITTINGS 316 Stainless
hose size 1 1-1/2 2 2-1/2 3 4 1-1/2 x 1
part number TC-4C A316 TC-6C A316 TC-8C A316 TC-10C A316 TC-12C A316 TC-16C A316 TCR-6X4C A316
list each 85.43 87.43 152.59 278.14 341.74 POR 97.45
3A LONG SHANK BREWERY HOSE ADAPTER 304 Stainless
hose size 1 1-1/2 2 3 4
part number BATC-4 304 BATC-6 304 BATC-8 304 BATC-12 304 BATC-16 304
316 Stainless
part number RATC-4X2 316 RATC-4X3 316 RATC-4 316 RATC-6X2 316 RATC-6X58 316 RATC-6X3 316 RATC-6X4 316 RATC-6 316 RATC-8X6 316 RATC-8 316 RATC-10 316 RATC-12 316 RATC-16 316
part number TCF-4X3 316 TCF-4 316 TCF-6 316 TCF-6X8 316 TCF-8X6 316 TCF-8 316 TCF-10X8 316 TCF-10 316 TCF-12X8 316 TCF-12 316 TCF-16 316
list each 86.30 105.97 112.03 148.33 98.37 148.33 148.33 227.03 227.03 264.90 284.57
3A TRI-CLAMP X WELD SHORT 316 Stainless
list each 62.00 73.90 79.47 109.67 174.87
3A RUBBER HOSE ADAPTER hose size 1 X 1/2 1 X 3/4 1X1 1-1/2 X 1/2 1-1/2 X 5/8 1-1/2 X 3/4 1-1/2 X 1 1-1/2 X 1-1/2 2 X 1-1/2 2X2 2-1/2 X 2-1/2 3X3 4X4
316 Stainless
npt size 1 X 3/4 1X1 1-1/2 X 1-1/2 1-1/2 X 2 2 X 1-1/2 2X2 2-1/2 X 2 2-1/2 X 2-1/2 3X2 3X3 4X4
list each 62.00 62.00 62.00 73.90 73.90 73.90 73.90 73.90 79.47 79.47 79.47 109.67 174.87
hose size 1/2 3/4 1 1-1/2 2 2-1/2 3 4
part number TCSW-2 316 TCSW-3 316 TCSW-4 316 TCSW-6 316 TCSW-8 316 TCSW-10 316 TCSW-12 316 TCSW-16 316
list each 9.83 9.83 9.83 9.83 11.37 18.17 22.33 32.57
3A TRI-CLAMP X WELD LONG 316 Stainless
hose size 1/2 3/4 1 1-1/2 2 2-1/2 3 4
part number TCLW-2 316 TCLW-3 316 TCLW-4 316 TCLW-6 316 TCLW-8 316 TCLW-10 316 TCLW-12 316 TCLW-16 316
list each 12.27 12.27 14.77 14.77 16.63 25.73 29.90 43.17
43
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
STANDARD TRI-CLAMP FITTINGS
3A SANITARY FERRULES
TRI-CLAMP FITTINGS
SANITARY FERRULES
304 Stainless hose size 1 1-1/2 2 2-1/2 3
part number TC-4C TC-6C TC-8C TC-10C TC-12C
list each 77.34 91.94 149.07 207.75 300.07
TRI-CLAMP REDUCERS 304 Stainless
hose size 1-1/2 X 1
part number TCR-6X4C
list each 76.41
WASHDOWN SWIVELS
WASHDOWN SWIVEL 300 Stainless
npt size 1/2 x 1/2 1/2 x 3/4 1/2 x 5/8 44
part number WDSS-2 WDESS-2X3 WDESS-2X58
list each 80.56 83.90 84.06
304 Stainless
hose size 1 1 1 1 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 4 4
ferrule i.d. 1-32/64 1-38/64 1-44/64 1-50/64 2-4/64 2-10/64 2-16/64 2-20/64 2-40/64 2-44/64 2-50/64 2-56/64 3-12/64 3-18/64 3-24/64 3-40/64 3-48/64 3-52/64 3-60/64 4 4-52/64 5-6/64
part number SAN100132 SAN100138 SAN100144 SAN100150 SAN150204 SAN150210 SAN150216 SAN150220 SAN200240 SAN200244 SAN200250 SAN200256 SAN250312 SAN250318 SAN250324 SAN300340 SAN300348 SAN300352 SAN300360 SAN300400 SAN400452 SAN400506
list each 55.64 55.64 55.64 55.64 63.57 63.57 63.57 63.57 82.65 82.65 82.65 82.65 198.67 198.67 198.67 214.57 214.57 214.57 214.57 214.57 POR POR
G TRI-CLAMP GASKET Buna-N Black
HEAVY DUTY SINGLE PIN TRI-CLAMP 304 Stainless
1/2 3/4 1 1-1/2 2 3 2-/12 4
part number TCC-3 TCC-3 TCC-6 TCC-6 TCC-8 TCC-10 TCC-12 TCC-16
list each 12.30 12.30 15.90 15.90 19.07 22.27 24.67 30.20
HEAVY DUTY DOUBLE PIN TRI-CLAMP 304 Stainless
hose size 1 1-1/2 2 2-/2 3 4
part number TCC-6DP TCC-6DP TCC-8DP TCC-10DP TCC-12DP TCC-16DP
304 Stainless
1/2 3/4 1 1-1/2 2 2-1/2 3 4
part number TCC-3SQ TCC-3SQ TCC-6SQ TCC-6SQ TCC-8SQ TCC-10SQ TCC-12SQ TCC-16SQ
list each 0.67 0.53 0.60 1.03 1.03 1.63
1 1-1/2 2 2-1/2 3 4
TCGB-4W TCGB-6W TCGB-8W TCGB-10W TCGB-12W TCGB-16W
1.20 1.10 1.00 1.50 1.50 2.43
1 1-1/2 2 2-1/2 3 4
TCGE-4 TCGE-6 TCGE-8 TCGE-10 TCGE-12 TCGE-16
1.00 1.13 1.13 1.57 1.57 2.07
1 1-1/2 2 3 4
TCGT-4 TCGT-6 TCGT-8 TCGT-12 TCGT-16
2.23 1.90 2.30 3.07 6.27
1 1-1/2 2 3 4
TCGV-4 TCGV-6 TCGV-8 TCGV-12 TCGV-16
6.17 4.27 4.43 10.80 14.87
EDPM Black
PTFE White
FKM Black list each 20.67 20.67 23.87 29.40 34.20 36.57
EASY INSTALL SQUEEZE TRI-CLAMP hose size
part number TCGB-4 TCGB-6 TCGB-8 TCGB-10 TCGB-12 TCGB-16
Buna-N White
TRI-CLAMPS & GASKETS
hose size
hose size 1 1-1/2 2 2-1/2 3 4
list each 40.65 54.86 54.86 65.02 65.02 79.23 83.27 97.48
Silicone White 1 1-1/2 2 3 4
TCGS-4 TCGS-6 TCGS-8 TCGS-12 TCGS-16
3.00 2.47 2.90 4.50 5.20
part number TCB-4 TCB-6 TCB-8 TCB-10 TCB-12
list each 3.74 4.92 7.04 11.39 13.50
TRI-CLAMP BUMPERS Silicone
hose size 1 1-1/2 2 2-1/2 3
HEAVY DUTY HIGH PRESSURE TRI-CLAMP 304 Stainless
hose size 1 1-1/2 2 2-1/2 3 4
part number TCC-6BT TCC-6BT TCC-8BT TCC-10BT TCC-12BT TCC-16BT
list each 34.20 34.20 42.53 44.26 47.67 63.57
45
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
PACIFIC COAST HEAVY NUT
PCT WINE FITTINGS
Brass
hose size 1-1/2 2 3
part number NBPCT-6 NBHPCT-8 NBHPCT-12
list each 37.86 58.86 78.75
WINE FERRULES Note: Standard ferrules for 1-1/2” & 2” can be used for wine fittings. For 3” use the following:
304 Stainless
hose size 3 3 3 3 3 3
WINE FITTING - FEMALE STEM 304 Stainless
hose size 1-1/2 2 3
part number PCTF-6C PCTF-8C PCTF-12C
list each 86.12 94.12 193.86
WINE FITTING - FEMALE STEM W/ HEAVY NUT 304 Stainless hose size 2 3
part number PCTFBH-8 PCTFBH-12
list each 270.47 348.93
WINE FITTING - MALE STEM 304 Stainless hose size 1-1/2 2 3
part number PCTM-6C PCTM-8C PCTM-12C
list each 105.05 114.80 236.52
WINE GASKET FITTING Buna-N
hose size 1-1/2 2 3
part number PCTGB-6 PCTGB-8 PCTGB-12
list each 2.76 4.94 10.57
PCTGS-6 PCTGS-8 PCTGS-12
2.76 4.94 10.57
Silicone 1-1/2 2 3
46
ferrule i.d. 3-44/64 3-48/64 3-52/64 4 4-8/64 4-16/64
part number FSS300344W FSS300348W FSS300352W FSS300400W FSS300408W FSS300416W
list each 29.59 29.59 29.59 29.59 29.59 29.59
Campbell Fittings
H
47
H Ferrules & Sleeves for High, Medium, and Low-Pressure Hose Systems Campbell Crimpnology™ ... the only comprehensive package of crimping products in the industry!
CampbellCrimpnology™ Crimpnology refers to all of the technology involved in crimping: The integrated design of every fitting, coupling, ferrule, and sleeve; the crimp procedures; crimp specifications; and crimp training & support. RELIEF BUMP Prolongs the life of the hose assembly by relieving stress and failure points commonly found at the end of crimped fittings.
HOSE FERRULE FITTING INTERLOCK The turn-in of the ferrule interlocks with the machined groove on the fitting or coupling, providing a mechanical attachment for exceptional hose retention.
Features and Benefits Crimpnology offers the following “7 Essentials” for crimping safe, repeatable, performance-rated hose systems: •
Interlock groove on all fittings and couplings is compatible with the turn-in end of the ferrule to ensure a 360° ferrule-to-fitting interlock.
•
errations specifically designed for crimping provide maximum hose S retention without potential tube failure.
•
hank length and ferrule/sleeve length are matched to maximize S retention and to avoid hose tube or cover damage.
•
Detailed assembly procedures are provided, including information to ensure use of compatible components.
•
Detailed crimping procedures ensure appropriate crimp specification is derived for each hose and fitting combination.
•
On-site crimping training by a Hose System Specialist is offered by Campbell Fittings to assist distributor personnel.
•
A daytime, toll-free “hotline” is manned by a Campbell Hose System Specialist to assist in all aspects of crimping.
Performance Rated
FERRULE & SLEEVE PART NUMBERING PRODUCT F = Ferrule S = Sleeve
MATERIAL FERRULE/SLEEVE I.D. PS = Plated Steel 216 = 2-16/64” SS = Stainless Steel 340 = 3-40/64”
F PS 150 216 L 48
NOMINAL HOSE SIZE 150 = 1-1/2” 200 = 2”
NON-STANDARD LENGTH L = Long S = Short
All Campbell pressure ratings are established and verified by hydrostatic testing to a 4x safety factor where applicable (see page 1 for pressure rating information). Test data and information regarding various combinations of hoses and fittings are available upon request. Note: The pressure ratings in this catalog are valid only when using all Campbell parts. For safety and quality assurance, always proof test hose assembly according to NAHAD guidelines.
H
FERRULES 4 4 4 4 4 6 6 6 6 8 8 8 8
FERRULES for use with products shown below: ChemJoint Couplings & Male Stems Section F
Insta-Lock & Campbell Cobra Section C
Crimpnology Nipples Section B
Plated Steel hose size 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2 2 2 2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3 3 3 3 3 4 4 4 4
ferrule i.d. 1-12/64 1-16/64 1-20/64 1-24/64 1-28/64 1-32/64 1-32/64 1-36/64 1-40/64 1-44/64 1-48/64 1-52/64 1-52/64 1-56/64 1-60/64 1-60/64 2 2-4/64 2-8/64 2-12/64 2-16/64 2-20/64 2-24/64 2-32/64 2-36/64 2-40/64 2-44/64 2-48/64 2-52/64 2-56/64 2-60/64 3-8/64 3-12/64 3-16/64 3-20/64 3-28/64 3-36/64 3-40/64 3-44/64 3-48/64 3-52/64 3-56/64 3-60/64 4 4-8/64 4-16/64 4-36/64 4-40/64 4-44/64 4-48/64
part number
list each
FPS075112 FPS075116 FPS075120 FPS075124 FPS075128 FPS075132 FPS100132 FPS100136 FPS100140 FPS100144 FPS100148 FPS100152 FPS125152 FPS125156 FPS125160 FPS150160 FPS150200 FPS150204 FPS150208 FPS150212 FPS150216 FPS150220 FPS150224 FPS200232 FPS200236 FPS200240 FPS200244 FPS200248 FPS200252 FPS200256 FPS200260 FPS250308 FPS250312 FPS250316 FPS250320 FPS250328 FPS300336 FPS300340 FPS300344 FPS300348 FPS300352 FPS300356 FPS300360 FPS300400 FPS300408 FPS300416 FPS400436 FPS400440 FPS400444 FPS400448
10.00 10.00 10.01 10.01 10.01 10.01 11.60 11.60 11.60 11.60 11.60 11.60 11.91 11.91 11.91 13.30 13.30 13.30 13.30 13.30 13.30 13.30 13.30 14.91 14.91 14.91 14.91 14.91 14.91 14.91 14.91 20.00 20.00 20.00 20.00 20.00 20.30 20.30 20.30 20.30 20.30 20.30 20.30 20.30 20.30 20.30 26.62 26.62 26.62 26.62
Sanitary Tri-Clamp Section G
4-52/64 4-56/64 4-60/64 5 5-4/64 6-56/64 7 7-8/64 7-24/64 8-48/64 9 9-16/64 9-32/64
Stainless Steel
FPS400452 FPS400456 FPS400460 FPS400500 FPS400504 FPS600656 FPS600700 FPS600708 FPS600724 FPS800848 FPS800900 FPS800916 FPS800932
26.62 26.62 26.62 26.62 26.62 59.55 59.55 59.55 59.55 129.45 129.45 129.45 129.45
hose size
ferrule i.d.
part number
list each
1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2 2 2 2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3 3 3 3 4 4 4 4 4
1 1-4/64 1-8/64 1-12/64 1-16/64 1-20/64 1-24/64 1-28/64 1-32/64 1-32/64 1-36/64 1-40/64 1-44/64 1-48/64 1-52/64 1-52/64 1-56/64 1-60/64 1-60/64 2 2-4/64 2-8/64 2-12/64 2-16/64 2-20/64 2-24/64 2-32/64 2-36/64 2-40/64 2-44/64 2-48/64 2-52/64 2-56/64 2-60/64 3-8/64 3-12/64 3-16/64 3-20/64 3-28/64 3-40/64 3-44/64 3-48/64 3-52/64 3-56/64 3-60/64 4 4-8/64 4-16/64 4-36/64 4-40/64 4-44/64 4-48/64 4-52/64
FSS050100 FSS050104 FSS050108 FSS075112 FSS075116 FSS075120 FSS075124 FSS075128 FSS075132 FSS100132 FSS100136 FSS100140 FSS100144 FSS100148 FSS100152 FSS125152 FSS125156 FSS125160 FSS150160 FSS150200 FSS150204 FSS150208 FSS150212 FSS150216 FSS150220 FSS150224 FSS200232 FSS200236 FSS200240 FSS200244 FSS200248 FSS200252 FSS200256 FSS200260 FSS250308 FSS250312 FSS250316 FSS250320 FSS250328 FSS300340 FSS300344 FSS300348 FSS300352 FSS300356 FSS300360 FSS300400 FSS300408 FSS300416 FSS400436 FSS400440 FSS400444 FSS400448 FSS400452
12.32 12.32 12.32 12.19 12.19 12.19 12.19 12.19 12.19 11.79 11.79 11.79 11.79 11.79 11.79 13.85 13.85 13.85 18.04 18.04 18.04 18.04 18.04 18.04 18.04 18.04 20.28 20.28 20.28 20.28 20.28 20.28 20.28 20.28 31.97 31.97 31.97 31.97 31.97 32.97 32.97 32.97 32.97 32.97 32.97 32.97 32.97 32.97 76.11 76.11 76.11 76.11 76.11 49
continued on next page
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM hose size
ferrule i.d.
part number
list each
4 4 4 4 6 6 6 6 8
4-56/64 4-60/64 5 5-4/64 6-56/64 7 7-8/64 7-24/64
FSS400456 FSS400460 FSS400500 FSS400504 FSS600656 FSS600700 FSS600708 FSS600724 FSS800XXX
76.11 76.11 76.11 76.11 95.28 95.28 95.28 95.28 POR
2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4
Plated Steel Heavy Duty (for 206S & FRAC-16C fittings only)
4 4 4 4 4 4
4-48/64 4-52/64 4-56/64 4-60/64 5 5-4/64
FPS400448F FPS400452F FPS400456F FPS400460F FPS400500F FPS400504F
41.36 41.36 41.36 41.36 41.36 41.36
FERRULES for use with products shown below:
3-8/64 3-12/64 3-16/64 3-20/64 3-28/64 3-36/64 3-40/64 3-44/64 3-48/64 3-52/64 3-56/64 3-60/64 4 4-8/64 4-16/64 4-40/64 4-44/64 4-48/64 4-52/64 4-56/64 4-60/64 5 5-4/64 5-12/64 5-20/64 5-28/64
FPS250308L FPS250312L FPS250316L FPS250320L FPS250328L FPS300336L FPS300340L FPS300344L FPS300348L FPS300352L FPS300356L FPS300360L FPS300400L FPS300408L FPS300416L FPS400440L FPS400444L FPS400448L FPS400452L FPS400456L FPS400460L FPS400500L FPS400504L FPS400512L FPS400520L FPS400528L
33.41 33.41 33.41 33.41 33.41 33.62 33.62 33.62 33.62 33.62 33.62 33.62 33.62 33.62 33.62 47.06 47.06 47.06 47.06 47.06 47.06 47.06 47.06 47.06 47.06 47.06
WARNING: NOT FOR USE WITH STEAM
Long Crimpnology Nipples Section B
Plated Steel
50
hose size 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2 2 2 2
ferrule i.d. 1 1-4/64 1-8/64 1-16/64 1-20/64 1-24/64 1-28/64 1-32/64 1-32/64 1-36/64 1-40/64 1-44/64 1-48/64 1-52/64 1-52/64 1-56/64 1-60/64 1-60/64 2 2-4/64 2-8/64 2-12/64 2-16/64 2-20/64 2-24/64 2-32/64 2-36/64 2-40/64 2-44/64 2-48/64 2-52/64 2-56/64 2-60/64
LIGHT DUTY FERRULES
Viton® Seal Ground Joints and Male Stems Section D
part number
list each
FPS050100S FPS050104S FPS050108S FPS075116 FPS075120 FPS075124 FPS075128 FPS075132 FPS100132 FPS100136 FPS100140 FPS100144 FPS100148 FPS100152 FPS125152L FPS125156L FPS125160L FPS150160L FPS150200L FPS150204L FPS150208L FPS150212L FPS150216L FPS150220L FPS150224L FPS200232L FPS200236L FPS200240L FPS200244L FPS200248L FPS200252L FPS200256L FPS200260L
11.61 11.61 11.61 10.00 10.00 10.01 10.01 10.01 10.01 11.60 11.60 11.60 11.60 11.60 11.60 11.91 16.86 16.86 16.86 20.17 20.17 20.17 20.17 20.17 20.17 20.17 20.17 24.29 24.29 24.29 24.29 24.29 24.29
LIGHT DUTY FERRULES for use with couplings shown below:
All Campbell Universals Section E
UniversaLock Section E
Plated Steel hose size 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1
ferrule i.d. 58/64 60/64 1-8/64 1-10/64 1-12/64 1-14/64 1-16/64 1-18/64 1-28/64 1-30/64 1-32/64 1-34/64 1-36/64
Double-Lock (Thor) Section E
Single-Lock (Bowes) Section E
part number FLPS050058 FLPS050060 FLPS075108 FLPS075110 FLPS075112 FLPS075114 FLPS075116 FLPS075118 FLPS100128 FLPS100130 FLPS100132 FLPS100134 FLPS100136
list each 1.50 1.50 1.94 1.94 1.94 1.94 1.94 1.94 3.00 3.00 3.00 3.00 3.00
H 304 Stainless hose size 1/2 3/4 3/4 3/4 3/4 3/4 3/4
ferrule i.d. 58/64 1-8/64 1-10/64 1-12/64 1-14/64 1-16/64 1-18/64
part number FLSS050058 FLSS075108 FLSS075110 FLSS075112 FLSS075114 FLSS075116 FLSS075118
list each 3.14 3.63 3.63 3.63 3.63 3.63 3.63
SLEEVES
SLEEVES for use with products shown below: Campbell Cobra™ Parts C & E Section C
Plated Steel hose size 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1 1 1 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2
sleeve i.d. 1-8/64 1-12/64 1-16/64 1-24/64 1-16/64 1-20/64 1-24/64 1-28/64 1-32/64 1-36/64 1-40/64 1-44/64 1-48/64 1-56/64 2 1-48/64 1-52/64 1-56/64 1-60/64 2 2-4/64 2-8/64 2-12/64 2-16/64 2-20/64 2-24/64 2-16/64 2-24/64 2-28/64
Standard Cobra™ Parts C & E Section C
part number
list each
SPS075108 SPS075112 SPS075116 SPS075124 SPS100116 SPS100120 SPS100124 SPS100128 SPS100132 SPS100136 SPS100140 SPS100144 SPS100148 SPS125156 SPS125200 SPS150148 SPS150152 SPS150156 SPS150160 SPS150200 SPS150204 SPS150208 SPS150212 SPS150216 SPS150220 SPS150224 SPS200216 SPS200224 SPS200228
5.84 5.84 5.84 5.84 5.52 5.52 5.52 5.52 5.52 5.52 5.52 5.52 5.52 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 6.61 6.61 6.61
2 2 2 2 2 2 2 2 2 2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 12 12
2-32/64 2-36/64 2-40/64 2-44/64 2-48/64 2-52/64 2-56/64 2-60/64 3 3-2/64 3 3-8/64 3-16/64 3-24/64 3-32/64 3-34/64 3-16/64 3-24/64 3-28/64 3-32/64 3-36/64 3-40/64 3-44/64 3-48/64 3-52/64 3-56/64 3-60/64 4 4-2/64 4-16/64 4-24/64 4-32/64 4-36/64 4-40/64 4-44/64 4-48/64 4-52/64 4-56/64 4-60/64 5 5-2/64 5-36/64 5-48/64 5-60/64 6-16/64 6-24/64 6-32/64 6-40/64 6-48/64 6-56/64 6 7 6 7-8/64 6 7-16/64 6 7-24/64 8-16/64 8-32/64 8-40/64 8-48/64 9 9-16/64 9-32/64 9-40/64 9-48/64 10-32/64 10-48/64 10-56/64 11 11-16/64 11-32/64 11-48/64 12-32/64 12-48/64
SPS200232 SPS200236 SPS200240 SPS200244 SPS200248 SPS200252 SPS200256 SPS200260 SPS200300 SPS200302 SPS250300 SPS250308 SPS250316 SPS250324 SPS250332 SPS250334 SPS300316 SPS300324 SPS300328 SPS300332 SPS300336 SPS300340 SPS300344 SPS300348 SPS300352 SPS300356 SPS300360 SPS300400 SPS300402 SPS400416 SPS400424 SPS400432 SPS400436 SPS400440 SPS400444 SPS400448 SPS400452 SPS400456 SPS400460 SPS400500 SPS400502 SPS500536 SPS500548 SPS500560 SPS600616 SPS600624 SPS600632 SPS600640 SPS600648 SPS600656 SPS600700 SPS600708 SPS600716 SPS600724 SPS800816 SPS800832 SPS800840 SPS800848 SPS800900 SPS800916 SPS800932 SPS800940 SPS800948 SPS101032 SPS101048 SPS101056 SPS101100 SPS101116 SPS101132 SPS101148 SPS121232 SPS121248
6.61 6.61 6.61 6.61 6.61 6.61 6.61 6.61 6.61 6.61 10.68 10.68 10.68 10.68 10.68 10.68 11.91 11.91 11.91 11.91 11.91 11.91 11.91 11.91 11.91 11.91 11.91 11.91 11.91 16.30 16.30 16.30 16.30 16.30 16.30 16.30 16.30 16.30 16.30 16.30 16.30 39.31 39.31 39.31 43.67 43.67 43.67 43.67 43.67 43.67 43.67 43.67 43.67 43.67 73.38 73.38 73.38 73.38 73.38 73.38 73.38 73.38 73.38 101.51 101.10 101.10 101.10 101.10 101.10 101.10 156.90 156.90
continued on next page
51
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM SLEEVES (continued from previous page)
304 Stainless
52
hose size
sleeve i.d.
part number
list each
3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1 1 1 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2 2 2 2 2 2 2 2 2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4
1-4/64 1-8/64 1-12/64 1-16/64 1-24/64 1-16/64 1-20/64 1-24/64 1-28/64 1-32/64 1-36/64 1-40/64 1-44/64 1-48/64 1-56/64 2 1-52/64 1-56/64 1-60/64 2 2-4/64 2-8/64 2-12/64 2-16/64 2-20/64 2-24/64 2-16/64 2-24/64 2-28/64 2-32/64 2-36/64 2-40/64 2-44/64 2-48/64 2-52/64 2-56/64 2-60/64 3 3-2/64 3 3-8/64 3-16/64 3-24/64 3-32/64 3-34/64 3-24/64 3-28/64 3-32/64 3-36/64 3-40/64 3-44/64 3-48/64 3-52/64 3-56/64 3-60/64 4 4-2/64 4-32/64 4-36/64 4-40/64 4-44/64 4-48/64 4-52/64 4-56/64 4-60/64 5 5-2/64
SSS075104 SSS075108 SSS075112 SSS075116 SSS075124 SSS100116 SSS100120 SSS100124 SSS100128 SSS100132 SSS100136 SSS100140 SSS100144 SSS100148 SSS125156 SSS125200 SSS150152 SSS150156 SSS150160 SSS150200 SSS150204 SSS150208 SSS150212 SSS150216 SSS150220 SSS150224 SSS200216 SSS200224 SSS200228 SSS200232 SSS200236 SSS200240 SSS200244 SSS200248 SSS200252 SSS200256 SSS200260 SSS200300 SSS200302 SSS250300 SSS250308 SSS250316 SSS250324 SSS250332 SSS250334 SSS300324 SSS300328 SSS300332 SSS300336 SSS300340 SSS300344 SSS300348 SSS300352 SSS300356 SSS300360 SSS300400 SSS300402 SSS400432 SSS400436 SSS400440 SSS400444 SSS400448 SSS400452 SSS400456 SSS400460 SSS400500 SSS400502
9.61 9.61 9.61 9.61 9.61 8.21 8.21 8.21 8.21 8.21 8.21 8.21 8.21 8.21 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 13.55 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49 13.49 19.90 19.90 19.90 19.90 19.90 19.90 19.95 19.95 19.95 19.95 19.95 19.95 19.95 19.95 19.95 19.95 19.95 19.95 32.23 32.23 32.23 32.23 32.23 32.23 32.23 32.23 32.23 32.23
6 6 6 6 6 6 6 6 6 8 8 9 10 12
6-16/64 6-24/64 6-32/64 6-40/64 6-48/64 6-56/64 7 7-8/64 7-16/64 7-24/64 8-48/64 9
SSS600616 SSS600624 SSS600632 SSS600640 SSS600648 SSS600656 SSS600700 SSS600708 SSS600716 SSS600724 SSS800848 SSS800900 SSS101xxx SSS121xxx
82.20 82.20 82.20 82.20 82.20 82.20 82.20 82.20 82.20 82.20 121.51 121.51 POR POR
SAL200228 SAL200232 SAL200236 SAL200240 SAL200244 SAL200248 SAL200252 SAL200256 SAL200260 SAL200300 SAL300332 SAL300336 SAL300340 SAL300344 SAL300348 SAL300352 SAL300356 SAL300360 SAL300400 SAL300404 SAL400436 SAL400440 SAL400444 SAL400448 SAL400452 SAL400456 SAL400460 SAL400500 SAL400504 SAL400508 SAL600632 SAL600640 SAL600648 SAL600656
14.01 14.01 14.01 14.01 14.01 14.01 14.01 14.01 14.01 14.01 20.77 20.77 20.77 20.77 20.77 20.77 20.77 20.77 20.77 20.77 27.79 27.79 27.79 27.79 27.79 27.79 27.79 27.79 27.79 27.79 83.70 83.70 83.70 83.70
Aluminum 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 6 6 6 6
2-28/64 2-32/64 2-36/64 2-40/64 2-44/64 2-48/64 2-52/64 2-56/64 2-60/64 3 3-32/64 3-36/64 3-40/64 3-44/64 3-48/64 3-52/64 3-56/64 3-60/64 4 4-4/64 4-36/64 4-40/64 4-44/64 4-48/64 4-52/64 4-56/64 4-60/64 5 5-4/64 5-8/64 6-32/64 6-40/64 6-48/64 4-56/64
H SLEEVES for use with products shown below:
Suction Hose Couplings Section A
Combination Nipples Section A
Ball & Socket Couplings Section A
Plated Steel hose size 1/2 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2 2 2 2 2 2 2 2 2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3 3 3
sleeve i.d. 1 1-8/64 1-12/64 1-16/64 1-20/64 1-24/64 1-28/64 1-32/64 1-36/64 1-40/64 1-44/64 1-48/64 1-40/64 1-48/64 1-52/64 1-56/64 1-60/64 2 2-4/64 2-8/64 2-12/64 2-16/64 2-20/64 2-24/64 2-8/64 2-16/64 2-24/64 2-28/64 2-32/64 2-36/64 2-40/64 2-44/64 2-48/64 2-52/64 2-56/64 2-60/64 3 2-48/64 2-56/64 3 3-8/64 3-16/64 3-24/64 3-32/64 3-8/64 3-16/64 3-24/64
part number
list each
SPS050100S SPS075108S SPS075112S SPS075116S SPS075120S SPS075124S SPS100128S SPS100132S SPS100136S SPS100140S SPS100144S SPS100148S SPS125140S SPS125148S SPS125152S SPS125156S SPS150160S SPS150200S SPS150204S SPS150208S SPS150212S SPS150216S SPS150220S SPS150224S SPS200208S SPS200216S SPS200224S SPS200228S SPS200232S SPS200236S SPS200240S SPS200244S SPS200248S SPS200252S SPS200256S SPS200260S SPS200300S SPS250248S SPS250256S SPS250300S SPS250308S SPS250316S SPS250324S SPS250332S SPS300308S SPS300316S SPS300324S
5.84 5.84 5.84 5.84 5.84 5.84 5.52 5.52 5.52 5.52 5.52 5.52 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 5.61 6.61 6.61 6.61 6.61 6.61 6.61 6.61 6.61 6.61 6.61 6.61 6.61 6.61 10.68 10.68 10.68 10.68 10.68 10.68 10.68 11.91 11.91 11.91
hose size
sleeve i.d.
part number
3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 5 5 5 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 12 12
3-28/64 3-32/64 3-36/64 3-40/64 3-44/64 3-48/64 3-52/64 3-56/64 3-60/64 4 4-16/64 4-24/64 4-32/64 4-36/64 4-40/64 4-44/64 4-48/64 4-52/64 4-56/64 4-60/64 5 5-36/64 5-48/64 5-60/64 6-16/64 6-24/64 6-32/64 6-40/64 6-48/64 6-56/64 7 7-8/64 7-16/64 7-24/64 8-16/64 8-32/64 8-40/64 8-48/64 9 9-16/64 9-32/64 9-40/64 9-48/64 10-32/64 10-48/64 10-56/64 11 11-16/64 11-32/64 11-48/64 12-32/64 12-48/64
SPS300328S SPS300332S SPS300336S SPS300340S SPS300344S SPS300348S SPS300352S SPS300356S SPS300360S SPS300400S SPS400416S SPS400424S SPS400432S SPS400436S SPS400440S SPS400444S SPS400448S SPS400452S SPS400456S SPS400460S SPS400500S SPS500536 SPS500548 SPS500560 SPS600616 SPS600624 SPS600632 SPS600640 SPS600648 SPS600656 SPS600700 SPS600708 SPS600716 SPS600724 SPS800816 SPS800832 SPS800840 SPS800848 SPS800900 SPS800916 SPS800932 SPS800940 SPS800948 SPS101032 SPS101048 SPS101056 SPS101100 SPS101116 SPS101132 SPS101148 SPS121232 SPS121248
list each 11.91 11.91 11.91 11.91 11.91 11.91 11.91 11.91 11.91 11.91 16.30 16.30 16.30 16.30 16.30 16.30 16.30 16.30 16.30 16.30 16.30 39.31 39.31 39.31 43.67 43.67 43.67 43.67 43.67 43.67 43.67 43.67 43.67 43.67 73.38 73.38 73.38 73.38 73.38 73.38 73.38 73.38 73.38 101.51 101.10 101.10 101.10 101.10 101.10 101.10 156.90 156.90
SSS050100S SSS075104S SSS075108S SSS075112S SSS075116S SSS075120S SSS075124S SSS075128S SSS100132S SSS100136S SSS100140S SSS100144S SSS100148S SSS125140S SSS125148S SSS125152S SSS125156S
9.62 9.62 9.62 9.62 9.62 9.62 9.62 8.21 8.21 8.21 8.21 8.21 8.21 9.91 9.91 9.91 9.91
304 Stainless 1/2 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/4
1 1-4/64 1-8/64 1-12/64 1-16/64 1-20/64 1-24/64 1-28/64 1-32/64 1-36/64 1-40/64 1-44/64 1-48/64 1-40/64 1-48/64 1-52/64 1-56/64
hose size
sleeve i.d.
part number
list each
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 2 2 2 2 2 2 2 2 2 2 2 2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 8 9 10 12
1-50/64 2 2-4/64 2-8/64 2-12/64 2-16/64 2-20/64 2-24/64 2-8/64 2-16/64 2-24/64 2-28/64 2-32/64 2-36/64 2-40/64 2-44/64 2-48/64 2-52/64 2-56/64 2-60/64 3 3-8/64 3-16/64 3-24/64 3-32/64 3-8/64 3-16/64 3-24/64 3-24/64 3-28/64 3-36/64 3-40/64 3-44/64 3-48/64 3-52/64 3-56/64 3-60/64 4 4-16/64 4-24/64 4-32/64 4-36/64 4-40/64 4-44/64 4-48/64 4-52/64 4-56/64 4-60/64 5 6-16/64 6-24/64 6-32/64 6-40/64 6-48/64 6-56/64 7 7-8/64 7-16/64 7-24/64 8-48/64 9
9.91 SSS150150S 9.91 SSS150200S 9.91 SSS150204S 9.91 SSS150208S 9.91 SSS150212S 9.91 SSS150216S 9.91 SSS150220S 9.91 SSS150224S SSS200208S 13.48 SSS200216S 13.48 SSS200224S 13.48 SSS200228S 13.48 SSS200232S 13.48 SSS200236S 13.48 SSS200240S 13.48 SSS200244S 13.48 SSS200248S 13.48 SSS200252S 13.48 SSS200256S 13.48 SSS200260S 13.48 SSS250300S 13.48 SSS250308S 19.90 SSS250316S 19.90 SSS250324S 19.90 SSS250332S 19.90 SSS300308S 19.94 SSS300316S 19.94 SSS300324S 19.94 SSS300328S 19.94 SSS300332S 19.94 SSS300336S 19.94 SSS300340S 19.94 SSS300344S 19.94 SSS300348S 19.94 SSS300352S 19.94 SSS300356S 19.94 SSS300360S 19.94 SSS300400S 19.94 SSS400416S 32.23 SSS400424S 32.23 SSS400432S 32.23 SSS400436S 32.23 SSS400440S 32.23 SSS400444S 32.23 SSS400448S 32.23 SSS400452S 32.23 SSS400456S 32.23 SSS400460S 32.23 SSS400500S 32.23 82.20 SSS600616 82.20 SSS600624 82.20 SSS600632 82.20 SSS600640 82.20 SSS600648 82.20 SSS600656 82.20 SSS600700 82.20 SSS600708 82.20 SSS600716 82.20 SSS600724 121.51 SSS800848 121.51 SSS800900 POR SSS101XXX POR SSS121XXX
53
Glossary of Campbell Crimpnology™ Terms Crimp Chart: a chart designed to assist in determining the crimp spec, which includes allowances for serration style, fitting and ferrule/sleeve O.D. and design. Crimp Spec (or specification): the outside diameter of the ferrule/sleeve after assembling and crimping. Cut-slots: notches cut into the turned-in end of a ferrule that allows the interlock portion to crimp straight down into the fitting interlock without opening outward during crimping.
54
Ferrule: a tube-like product with one end turned in, so as to affect an interlock into a groove on a mating fitting or coupling. Ferrule Length: the overall length of the ferrule as measured from the turn-in end to the open end. Ferrule/Sleeve I.D.: the inside bowl diameter of the ferrule; the inside diameter of the sleeve; the inside diameter of either where the hose is placed. Gauge: the thickness of the ferrule/sleeve material.
Interlock Groove: a groove designed into the fitting/coupling to accept the turn-in end of the ferrule. Shank Length: the hose barb area measured from the end of the fitting to the interlock groove. Sleeve: a tube-like product with no interlock provisions. Sleeve Length: the overall length of the sleeve from end to end. Turn-in: the interlocking end of the ferrule.
Campbell Fittings
I
55
I
Small Diameter Multi-Purpose Fittings MALE & FEMALE INSERT FITTINGS
BRASS GARDEN HOSE COUPLINGS
Insert fittings are precision screw machined in steel, stainless steel and brass.
Precision screw machined from brass. Available with short shank or long shank.
Recommended use
• Low pressure water
• Low pressure air, water
Recommended hose attachment • Brass Crimp-on Ferrules • Worm Gear Clamps • Preformed Band Clamps
Recommended use Recommended hose attachment • Brass Crimp-on Ferrules • Worm Gear Clamps • Preformed Band Clamps
BRASS PUSH-ON FITTINGS
BRASS FERRULES Recommended use • Low pressure air, water
Recommended hose attachment • None - When used with special Push-on Hose, no clamp or ferrule is needed. The liner of the hose grabs securely onto the barb of the fitting. DO NOT use Push-on Fittings with conventional hose.
56
Brass ferrules are lightweight, easy to assemble, and provide a smooth outer surface.
Recommended use • Crimp-on hose assemblies to secure hose and fittings for low-pressure air and water applications
I Brass
BARBED HOSE INSERTS
MALE INSERT Plated Steel hose x npt 1/4 X 1/8 1/4 X 1/4 1/4 X 3/8 3/8 X 1/8 3/8 X 1/4 3/8 X 3/8 3/8 X 1/2 1/2 X 1/4 1/2 X 3/8 1/2 X 1/2 1/2 X 3/4 3/4 X 1/2 3/4 X 3/4 1 X 3/4 1X1
part number SM-0402 SM-0404 SM-0406 SM-0602 SM-0604 SM-0606 SM-0608 SM-0804 SM-0806 SM-0808 SM-0812 SM-1208 SM-1212 SM-1612 SM-1616
list each 8.54 12.41 10.21 10.78 12.24 11.22 13.92 14.08 14.30 11.70 19.30 16.40 17.52 20.91 22.76
SSM-0402 SSM-0404 SSM-0406 SSM-0604 SSM-0606 SSM-0608 SSM-0804 SSM-0806 SSM-0808 SSM-0812 SSM-1008 SSM-1208 SSM-1212 SSM-1216 SSM-1612 SSM-1616
31.90 29.10 29.51 25.82 27.55 47.34 27.94 31.07 40.69 60.95 54.23 54.23 77.33 102.35 62.52 96.25
316 Stainless 1/4 X 1/8 1/4 X 1/4 1/4 X 3/8 3/8 X 1/4 3/8 X 3/8 3/8 X 1/2 1/2 X 1/4 1/2 X 3/8 1/2 X 1/2 1/2 X 3/4 5/8 X 1/2 3/4 X 1/2 3/4 X 3/4 3/4 X 1 1 X 3/4 1X1
hose x npt 1/4 X 1/8 1/4 X 1/4 1/4 X 3/8 5/16 X 1/8 5/16 X 1/4 3/8 X 1/8 3/8 X 1/4 3/8 X 3/8 3/8 X 1/2 1/2 X 1/4 1/2 X 3/8 1/2 X 1/2 1/2 X 3/4 5/8 X 3/8 5/8 X 1/2 5/8 X 3/4 3/4 X 1/2 3/4 X 3/4 1 X 3/4 1X1 1-1/4 X 1
part number BM-0402 BM-0404 BM-0406 BM-0502 BM-0504 BM-0602 BM-0604 BM-0606 BM-0608 BM-0804 BM-0806 BM-0808 BM-0812 BM-1006 BM-1008 BM-1012 BM-1208 BM-1212 BM-1612 BM-1616 BM-2016
list/ 100 205.00 237.70 364.10 224.50 262.70 259.60 232.10 346.70 591.70 339.00 351.20 534.60 792.70 391.80 603.40 817.60 691.60 780.50 986.60 1608.80 1980.70
carton qty 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
list/ 100 235.90 298.00 362.40 443.60 585.00
carton qty 25 25 25 25 25
list/ 100 216.30 275.00 259.60 358.30 426.30 585.70
carton qty 25 25 25 25 25 25
list/ 100 340.90 483.10 331.90 451.70 775.50 679.00 1062.70
carton qty 25 25 25 25 25 25 25
FEMALE INSERT Brass
hose x npt 1/4 X 1/8 1/4 X 1/4 5/16 X 1/4 1/2 X 3/8 1/2 X 1/2
part number BF-0402 BF-0404 BF-0504 BF-0806 BF-0808
HOSE MENDER Brass
hose size 1/4 X 1/4 5/16 X 5/16 3/8 X 3/8 1/2 X 1/2 5/8 X 5/8 3/4 X 3/4
part number BH-0404 BH-0505 BH-0606 BH-0808 BH-1010 BH-1212
FEMALE SWIVEL (with ball seat) Brass
hose x npsm 1/4 X 1/4 5/16 X 1/4 3/8 X 1/4 3/8 X 3/8 1/2 X 3/8 1/2 X 1/2 3/4 X 3/4
part number BFS-0404 BFS-0504 BFS-0604 BFS-0606 BFS-0806 BFS-0808 BFS-1212
57
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
MACHINED BRASS GARDEN HOSE COUPLINGS
BRASS PUSH-ON FITTINGS
MALE PUSH-ON hose x npt 1/4 X 1/8 1/4 X 1/4 1/4 X 3/8 5/16 X 1/4 3/8 X 1/8 3/8 X 1/4 3/8 X 3/8 3/8 X 1/2 1/2 X 1/4 1/2 X 3/8 1/2 X 1/2 1/2 X 3/4 5/8 X 3/8 5/8 X 1/2 3/4 X 1/2 3/4 X 3/4
GARDEN HOSE SET part number BMP-0402 BMP-0404 BMP-0406 BMP-0504 BMP-0602 BMP-0604 BMP-0606 BMP-0608 BMP-0804 BMP-0806 BMP-0808 BMP-0812 BMP-1008 BMP-1012 BMP-1208 BMP-1212
list/ 100 234.80 276.00 368.70 357.40 385.20 311.10 379.50 600.50 449.10 414.10 610.20 865.20 785.90 1041.40 960.30 1030.20
25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
FEMALE PUSH-ON hose x npt 1/4 X 1/8 1/4 X 1/4 5/16 X 1/4 3/8 X 1/4 3/8 X 3/8 1/2 X 3/8 1/2 X 1/2
58
part number GHS-06 GHS-08 GHS-10 GHS-12 NPS-16
list each 14.38 15.30 15.88 16.18 29.59
carton qty 25 25 25 25 25
list each 7.69 7.96 7.95 8.02 14.21
carton qty 25 25 25 25 25
carton qty 25 25 25 25 25
carton qty 100 100
GARDEN HOSE FEMALE hose size 3/8 1/2 5/8 3/4 1(NPSH)
part number GHF-06 GHF-08 GHF-10 GHF-12 NPF-16
GARDEN HOSE MALE part number BFP-0402 BFP-0404 BFP-0504 BFP-0604 BFP-0606 BFP-0806 BFP-0808
list/ 100 357.40 373.90 578.90 430.50 461.40 542.80 628.30
carton qty 25 25 25 25 25 25 25
part number BHP-0404 BHP-0505 BHP-0606 BHP-0808 BHP-1010 BHP-1212
hose size 3/8 1/2 5/8 3/4 1(NPSH)
part number GHM-06 GHM-08 GHM-10 GHM-12 NPM-16
list each 7.55 7.80 7.84 7.91 15.56
washer size 3/4 1(NPSH)
part number GHW-12 GHW-16
list/ 100 26.00 52.30
WASHER
HOSE MENDER PUSH-ON hose size 1/4 X 1/4 5/16 X 5/16 3/8 X 3/8 1/2 X 1/2 5/8 X 5/8 3/4 X 3/4
hose size 3/8 1/2 5/8 3/4 1(NPSH)
carton qty
list/ 100 324.50 425.40 361.10 595.30 841.50 1000.10
carton qty 25 25 25 25 25 25
I BRASS FERRULES i.d. x length 0.410 X 0.500 0.450 X 0.563 0.478 X 0.687 0.500 X 0.500 0.500 X 1.000 0.525 X 0.500 0.525 X 1.000 0.531 X 1.000
pierce dia. 0.266 0.344 0.328 0.344 0.344 0.344 0.375 0.438
part number F-222 F-316 F-157 F-225 F-265 F-230 F-268 F-273
list/ 100 POR POR POR POR POR POR POR POR
bag qty. 50 50 50 50 50 50 50 50
0.548 X 0.484 0.562 X 1.000 0.575 X 0.484 0.593 X 1.000 0.600 X 0.500 0.625 X 0.500 0.625 X 1.000 0.650 X 0.500
0.375 0.438 0.438 0.438 0.500 0.500 0.438 0.500
F-236 F-278 F-031 F-284 F-030 F-028 F-288 F-025
POR POR POR POR POR POR POR POR
50 50 50 50 50 50 50 50
0.656 X 1.000 0.675 X 0.516 0.687 X 1.000 0.700 X 0.516 0.718 X 1.000 0.718 X 1.000 0.725 X 0.531 0.750 X 0.531 0.750 X 1.000 0.750 X 1.000
0.438 0.500 0.500 0.500 0.625 0.500 0.500 0.500 0.625 0.500
F-294 F-022 F-300 F-018 F-302 F-302B F-016 F-013 F-305 F-305B
POR POR POR POR POR POR POR POR POR POR
50 50 50 50 50 50 50 50 50 50
0.775 X 0.563 0.782 X 1.000 0.782 X 1.000 0.812 X 1.000 0.825 X 0.547 0.875 X 0.844 0.937 X 0.844 0.975 X 0.844 1.150 X 0.844
0.500 0.625 0.500 0.562 0.625 0.562 0.688 0.688 0.875
F-009 F-310 F-310B F-314 F-001 F-255 F-242 F-181 F-241
POR POR POR POR POR POR POR POR POR
50 50 50 50 50 50 50 50 50
59
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
60
Campbell Fittings
J
61
J
Multi-Purpose Clamps & Tools
PREFORMED BAND CLAMPS, BANDING, BUCKLES, AND TOOLS
WORM GEAR & T-BOLT CLAMPS
Worm gear clamps are available in multiple styles including Micro-Gear, Hy-Gear, Snaplock, and Lined. CENTER PUNCH CLAMPS Strapbinder’s double wrapped center punch preformed hose clamps are available in various materials and diameters to satisfy a wide variety of applications. SMOOTH SEAL™ J-SERIES CLAMPS Strapbinder J-Series clamps are ideal for most industrial hose clamping applications. POW’R-TIGHT™ CLAMPS The Strapbinder Pow’r-Tight clamps deliver best-in-class performance for demanding applications ideal for thick walled and higher durometer hose.Stronger than the J-Series clamp, the Pow’r-Tight is constructed with 3/4” wide T201 1/4” hard stainless steel for exceptional band strength. The Pow’r-Tight has a smooth seal design for gap free contact, a heavy duty buckle, and is double wrapped to provide optimal holding power. POW’R-WRAP™ TIES The Strapbinder Pow’r-Wrap is a stainless steel tie that is dependable, easy to apply, and can be used in a broad range of fastening, securing, and sealing applications. The Pow’r-Wrap is constructed with 304 stainless steel for exceptional corrosion resistance in outdoor environments. The tie is a smooth seal design for gap free contact & tensions, cuts and locks for quick and easy application. It can be used for the securement of ducting, tags, hoses, cable bundles and constant velocity boots. GRIPCLAMP TOOL Strapbinder’s battery powered GripClamp tool tensions, locks and cuts the strap, eliminating the need for multiple tools, saving you time and money. Its versatile design can be used for J-Series, center punch and band and buckle applications. For more product details, visit CampbellFittings.com to download the Strapbinder catalog. 62
T-bolt clamps provide uniform sealing pressure for a positive, reliable seal. Designed for use in high vibration and large diameter applications common in heavy trucks, industrial machinery, off-road equipment, agricultural irrigation and machinery. For more product details, visit CampbellFittings.com to download the Ideal Tridon catalog.
J PREFORMED BAND CLAMPS
CENTER PUNCH 201 Stainless clamp width
clamp id.
part number
list/ 100
carton qty.
3/8 3/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8
13/16 1-3/8 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/2 4 4-1/2 5 6 7 8
HBCP3S HBCP311S HBCP4S HBCP5S HBCP6S HBCP7S HBCP8S HBCP9S HBCP10S HBCP11S HBCP12S HBCP14S HBCP16S HBCP18S HBCP20S HBCP24S HBCP28S HBCP32S
177.00 192.00 223.00 246.00 250.00 273.00 288.00 312.00 335.00 354.00 373.00 412.00 465.00 500.00 562.00 608.00 727.00 792.00
100 100 100 100 100 100 100 100 50 50 50 50 25 25 25 25 25 25
Galvanized Steel clamp width
clamp id.
part number
list/ 100
carton qty.
3/8 3/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8
13/16 1-3/8 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/2 4 4-1/2 5 6 7 8
HBCP3 HBCP311 HBCP4 HBCP5 HBCP6 HBCP7 HBCP8 HBCP9 HBCP10 HBCP11 HBCP12 HBCP14 HBCP16 HBCP18 HBCP20 HBCP24 HBCP28 HBCP32
158.00 138.00 92.00 104.00 104.00 112.00 119.00 131.00 146.00 150.00 158.00 169.00 196.00 208.00 208.00 238.00 273.00 385.00
100 100 100 100 100 100 100 100 50 50 50 50 25 25 25 25 25 25
SMOOTH SEAL™ J-SERIES 201 Stainless clamp width
clamp id.
part number
list/ 100
carton qty.
1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 5/8 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4
1 1-3/8 13/16 1 1-3/8 2 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/2 4 4-1/2 5 6 7 8
HBJS242 HBJS241 HBJS201 HBJS243 HBJS202 HBJS245 HBJS203 HBJS204 HBJS205 HBJS206 HBJS207 HBJS208 HBJS209 HBJS210 HBJS211 HBJS212 HBJS213 HBJS214 HBJS215 HBJS216 HBJS218 HBJS219
277.00 277.00 192.00 223.00 219.00 246.00 269.00 296.00 358.00 396.00 435.00 462.00 492.00 581.00 631.00 673.00 769.00 827.00 896.00 1031.00 1238.00 1392.00
100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 25 25 25 25 25 25
Galvanized Steel clamp width
clamp id.
part number
list/ 100
carton qty.
3/8 3/8 3/8 1/2 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4
13/16 1 1-3/8 1-1/4 1-1/2 1-3/4 2 2-1/2 3 3-1/2 4 4-1/2 4
HBJS301 HBJS343 HBJS302 HBJS304 HBJS305 HBJS306 HBJS307 HBJS309 HBJS311 HBJS312 HBJS313 HBJS314 HBJS315
196.00 88.00 92.00 131.00 154.00 169.00 185.00 212.00 235.00 288.00 346.00 354.00 385.00
100 100 100 100 100 100 100 100 50 50 25 25 25
POW’R-TIGHT™ CLAMP 201 Stainless clamp width
clamp id.
part number
list/ 100
carton qty.
3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4
2 2-1/4 3 3-1/2 4 4-1/2 5 6 6-1/2 7 8 9
HDSL227 HDSL210 HDSL211 HDSL212 HDSL213 HDSL214 HDSL215 HDSL216 HDSL217 HDSL218 HDSL219 HDSL228
742.00 808.00 877.00 931.00 1069.00 1150.00 1242.00 1427.00 1573.00 1719.00 1935.00 2165.00
100 50 50 50 25 25 25 25 25 25 25 10
63
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
POW’R-WRAP™ TIES 304 Stainless Steel
BUCKLES
clamp width
clamp length
part number
list/ 100
carton qty
1/4 1/4 1/4 1/4 1/4
10 16.5 22.5 29 35
HBPW211 HBPW212 HBPW213 HBPW214 HBPW215
235.00 304.00 377.00 454.00 519.00
500 500 500 500 500
Ear Style - 201 Stainless Steel width
part number
list/ 100
carton qty
1/4 3/8 1/2 5/8 3/4
ST252 ST253 ST254 ST255 ST256
54.00 73.00 96.00 119.00 146.00
100 100 100 100 100
Heavy Duty - 201 Stainless Steel 3/4 1 1
IDENTIFICATION TAGS 304 Stainless Steel width in.
length in.
part number
list/ 100
carton qty
3/4
3-1/2
ST750350
242.00
100
235.00 177.00
100 100
316 Stainless Steel 3/4 1-1/2
2 2-12
ST750200 ST150250
BANDING, BUCKLES, AND TOOLS
100FT. SELF DISPENSING COILS 304 Stainless
604.00 573.00 754.00
25 25 25
WING SEALS 304 Stainless Steel width
part number
list/ 100
carton qty
1/2 3/4
ST154 ST156
69.00 104.00
100 100
SCREWBINDER™ BUCKLES 201 Stainless Steel width
part number
list/ 100
carton qty
3/4
ST726
746.00
25
GRIP CLAMP TOOL
band width
part number
list/ 100ft.
qty/coil
1/4 3/8 1/2 5/8 3/4 1/2 3/4
ST202 ST203 ST204 ST205 ST206 ST404 ST406
103.50 103.69 140.23 171.62 209.46 276.23 419.65
100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.
100FT. PLASTIC TOTES 201 Stainless band width
part number
list/ 100ft.
qty/coil
1/2 5/8 3/4
ST204B ST205G ST206R
145.81 207.54 214.62
100 ft. 100 ft. 100 ft.
BIGBINDER BAND 201 Stainless
64
ST440 ST441 ST442
band width
part number
list/ 100ft.
qty/coil
3/4 1 1-1/4
ST430 ST431 ST432
537.38 460.38 530.62
100 ft. 100 ft. 100 ft.
part description number 800500 800505 800800 800805
list each
Battery Powered J-Series Clamping Tool 8034.23 Battery Powered J-Series Bench Mounted System 10225.38 Battery Powered Center Punch Tensioning Tool 8034.23 Battery Powered Band and Buckle Tensiong Tool 8034.23
GRIP CLAMP TOOL ACCESSORIES part description number
list each
800638 800637 800802 800293 800294 800489 800506 800521
1318.77 1318.77 1318.77 557.69 307.69 384.62 1346.15 865.39
Center Punch Attachment Band and Buckle Attachment J-Series Attachment 18V Lithium Ion Battery Charger Foot Petal Bench Mount Fixture Spare Battery & Charger
CENTER PUNCH TOOL & ADAPTER description
list each
HBC-300 for 5/8” wide clamps HBC-032 adapter for 3/8” clamps
272.69 22.81
part number
J F38
MICRO GEAR 62P
part number
description
F38
light duty rachet tool for 2/8” and 5/8” clamps
list each
Screw: Plated Carbon Steel Band: 301 Stainless Steel
109.68
size min 04 05 06 08 10 12 16 20
SPIN TIGHT TOOL part number
description
list each
ST402B
for heavy duty applications 741.38
SPIN TIGHT TOOL part number
description
ST-001 HBJ-001
spin tight tensioner adaptor for ST-001
Screw: 302 Stainless Steel Band: 301 Stainless Steel 04 05 06 08 10 12 16 20
5/16 5/16 5/16 7/16 1/2 9/16 11/16 3/4
part number 5/8 62604 3/4 62M05 7/8 62606 1 62M08 1-1/16 62M10 1-1/4 62M12 1-1/2 62M16 1-3/4 62M20
list/ 100 123.00 123.00 123.00 144.00 144.00 150.00 150.00 155.00
carton qty 10 10 10 10 10 10 10 10
1/2” HY-GEAR 67-4
261.88 225.81
Screw: 305 Stainless Steel Band: 301 Stainless Steel
MICRO GEAR 62M
max
part number 5/8 6204 3/4 62P05 7/8 6206 1 62P08 1-1/16 62P10 1-1/4 62P12 1-1/2 62P16 1-3/4 62P20
list each
WORM GEAR CLAMPS
size min
5/16 5/16 5/16 7/16 1/2 9/16 11/16 3/4
max
list/ 100 155.00 155.00 155.00 177.00 180.00 187.00 187.00 187.00
carton qty 10 10 10 10 10 10 10 10
size min
max
part number
6 8 10 12 16 20 24 28 32 36 40 44 48 52 56 60 64 72 80 88 96 104 128 152 164 188 208 212 224 236 248 270 312 332 390 569
7/8 1 1-1/16 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 5 5-1/2 6 6-1/2 7 8-1/2 10 10-3/4 12-1/4 13-1/2 13-3/4 14-1/2 15-1/4 16 17-1/2 20 21-1/4 25 36-1/4
67004-0006 67004-0008 67004-0010 67004-0012 67004-0016 67004-0020 67004-0024 67004-0028 67004-0032 67004-0036 67004-0040 67004-0044 67004-0048 67004-0052 67004-0056 67004-0060 67004-0064 67004-0072 67004-0080 67004-0088 67004-0096 67004-0104 67004-0128 67004-0152 67004-0164 67004-0188 67004-0208 67004-0212 67004-0224 67004-0236 67004-0248 67004-0270 67004-0312 67004-0332 67004-0390 67004-0569
3/8 7/16 1/2 1/2 11/16 3/4 1 1-1/4 1-1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 3 3-1/2 4 4-1/2 5 6-1/2 2 1-3/4 2 11-1/4 11-1/2 12-1/2 13-1/4 1-3/4 15-1/4 18 19-1/4 14-1/2 32
list/ 100
carton qty
214.00 214.00 214.00 214.00 214.00 219.00 219.00 219.00 219.00 230.00 262.00 300.00 300.00 316.00 316.00 321.00 321.00 353.00 364.00 409.00 412.00 366.00 562.00 621.00 637.00 679.00 749.00 765.00 813.00 899.00 1006.00 936.00 1150.00 1177.00 1284.00 1517.00
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
65
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM
9/16” HY-GEAR 63-4 Screw: 305 Stainless Steel Band: 301 Stainless Steel size min 6 8 10 12 16 20 24 28 32 36 40 44 48 52 56 60 152
3/8 7/16 1/2 1/2 11/16 3/4 1 1-1/4 1-1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2
max
part number 7/8 63004-0006 1 63004-0008 1-1/16 63004-0010 1-1/4 63004-0012 1-1/2 63004-0016 1-3/4 63004-0020 2 63004-0024 2-1/4 63004-0028 2-1/2 63004-0032 2-3/4 63004-0036 3 63004-0040 3-1/4 63004-0044 3-1/2 63004-0048 3-3/4 63004-0052 4 63004-0056 4-1/4 63004-0060 10 63004-0152
IMPORTED CLAMPS list/ 100 294.00 294.00 294.00 305.00 305.00 310.00 310.00 316.00 316.00 321.00 396.00 407.00 428.00 449.00 471.00 492.00 490.00
carton qty 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
list/ 100 417.00 449.00 471.00 501.00 533.00 535.00 610.00 684.00 653.00 717.00 770.00 886.00 952.00 1006.00 1192.00
carton qty 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
list/ 100 407.00 407.00 407.00 417.00 417.00 417.00 417.00 428.00 428.00 439.00 535.00 540.00 556.00
carton qty 10 10 10 10 10 10 10 10 10 10 10 10 10
SNAPLOCK 550 Screw: 410 Stainless Steel Band: 201 Stainless Steel size min 20 28 36 48 56 72 88 104 128 152 188 216 248 280 312
max
part number 1-3/4 3/4 550-020 2-1/4 1 550-028 2-3/4 1 550-036 1-1/2 3-1/2 550-048 4 1 550-056 5 2 550-072 6 2 550-088 2-7/8 7 550-104 1-3/4 8-1/2 550-128 10 2 550-152 12-1/4 550-188 2 10-3/16 14 550-216 1-3/4 16 550-248 14-1/4 18 550-280 1-7/8 20 550-312
LINED 615 Screw: 305 Stainless Steel Band: 201 Stainless Steel size min 6 8 10 12 16 20 24 28 32 36 40 44 48 66
max
part number 7/8 1/2 615-006 1 5/8 615-008 11/16 1-1/16 615-010 11/16 1-1/4 615-012 1-1/2 3/4 615-016 1-3/4 1 615-020 1-1/16 2 615-024 1-5/16 2-1/4 615-028 1-9/16 2-1/2 615-032 1-13/16 2-3/4 615-036 2-1/16 3 615-040 2-5/16 3-1/4 615-044 2-9/16 3-1/2 615-048
DOUBLE BOLT CLAMPS Ductile Iron hose o.d. min.
hose o.d. max.
part number
list each
7/8 1-3/16 1-5/16 1-3/4 2-3/16 2-5/16 3-3/16 3-7/16 4 4-1/2 4-11/16 5-1/2 6-1/8 6-7/8 7-3/8 8-1/4 8-15/16 9-5/16 11-3/16 13-3/16 15-1/16
1-1/8 1-5/16 1-17/32 1-31/32 2-9/16 2-15/16 3-3/4 3-13/16 4-3/8 5-1/8 5-1/8 5-15/16 6-7/8 7-3/8 8 8-7/8 9-3/4 11-3/8 13 15 17-1/2
SL-29 SL-34 SL-40 SL-49 SL-60 SL-76 SL-94 400 463 525 550 600 675 769 818 875 988 1125 1275 1450 1700
4.68 5.00 6.70 9.27 9.98 11.04 19.58 20.15 20.91 28.03 28.03 31.00 34.85 41.03 64.33 60.12 65.02 125.02 142.27 235.02 291.79
hose size
part number
list each
1-1/2 2 2-1/2 3 4 5 6 8 10 12
SC-150 SC-200 SC-250 SC-300 SC-400 SC-500 SC-600 SC-800 SC-1000 SC-1200
17.45 19.96 23.54 25.12 27.93 38.71 38.05 43.63 61.20 62.95
SPIRAL CLAMPS (right hand a.k.a. clockwise) Plated Steel
J T-BOLT CLAMPS
T-BOLT CLAMPS
Bolt & Trunion: Galvanized Steel Band: Stainless Steel
T-BOLT CLAMPS Bolt & Trunion: Galvanized Steel Band: Stainless Steel nom dia 1.31 1.50 1.63 1.75 1.88 2.00 2.12 2.25 2.38 2.50 2.56 2.63 2.75 2.88 3.00 3.12 3.25 3.50 3.62 3.75 3.82 4.00 4.25 4.50 4.75 5.00 5.25 5.50 5.75 6.00 6.25 6.50 6.75 7.00 7.25 7.50 8.00 8.25 8.50 8.88 9.00 9.50 10.00 10.88 12.00 12.88
min
max
1.25 1.34 1.47 1.59 1.72 1.84 1.96 2.09 2.22 2.34 2.33 2.40 2.52 2.65 2.77 2.87 3.02 3.27 3.39 3.52 3.59 3.77 4.02 4.27 4.52 4.77 5.02 5.27 5.52 5.77 6.02 6.27 6.52 6.77 7.02 7.27 7.77 8.02 8.27 8.65 8.77 9.27 9.77 10.65 11.77 12.65
1.41 1.56 1.69 1.81 1.94 2.06 2.18 2.31 2.44 2.56 2.62 2.69 2.81 2.94 3.06 3.18 3.31 3.56 3.68 3.81 3.88 4.06 4.31 4.56 4.81 5.06 5.31 5.56 5.81 6.06 6.31 6.56 6.81 7.06 7.31 7.56 8.06 8.31 8.56 8.94 9.06 9.56 10.06 10.94 12.06 12.94
part number 30050-0131-051 30050-0150-051 30050-0163-051 30050-0175-051 30050-0188-051 30050-0200-051 30050-0212-051 30050-0225-051 30050-0238-051 30050-0250-051 30050-0256-051 30050-0263-051 30050-0275-051 30050-0288-051 30050-0300-051 30050-0312-051 30050-0325-051 30050-0350-051 30050-0362-051 30050-0375-051 30050-0382-051 30050-0400-051 30050-0425-051 30050-0450-051 30050-0475-051 30050-0500-051 30050-0525-051 30050-0550-051 30050-0575-051 30050-0600-051 30050-0625-051 30050-0650-051 30050-0675-051 30050-0700-051 30050-0725-051 30050-0750-051 30050-0800-051 30050-0825-051 30050-0850-051 30050-0888-051 30050-0900-051 30050-0950-051 30050-1000-051 30050-1088-051 30050-1200-051 30050-1288-051
list each 11.82 11.82 11.82 11.82 11.82 11.82 11.82 8.13 8.13 8.35 8.35 7.92 7.92 7.92 8.03 8.03 8.13 8.13 8.45 8.45 8.56 8.56 8.56 8.56 8.56 8.67 8.67 9.20 9.20 9.31 9.31 9.42 9.42 9.52 9.52 9.52 9.63 9.63 9.74 9.74 10.06 10.06 10.14 10.17 10.70 10.91
bag qty 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
nom dia 1.31 1.50 1.63 1.75 1.88 2.00 2.12 2.25 2.38 2.50 2.56 2.63 2.75 2.88 3.00 3.12 3.25 3.50 3.62 3.75 3.82 4.00 4.25 4.50 4.75 5.00 5.25 5.50 5.75 6.00 6.25 6.50 6.75 7.00 7.25 7.50 8.00 8.25 8.50 8.88 9.00 9.50 10.00 10.88 12.00 12.88
min
max
1.25 1.34 1.47 1.59 1.72 1.84 1.96 2.09 2.22 2.34 2.33 2.40 2.52 2.65 2.77 2.87 3.02 3.27 3.39 3.52 3.59 3.77 4.02 4.27 4.52 4.77 5.02 5.27 5.52 5.77 6.02 6.27 6.52 6.77 7.02 7.27 7.77 8.02 8.27 8.65 8.77 9.27 9.77 10.65 11.77 12.65
1.41 1.56 1.69 1.81 1.94 2.06 2.18 2.31 2.44 2.56 2.62 2.69 2.81 2.94 3.06 3.18 3.31 3.56 3.68 3.81 3.88 4.06 4.31 4.56 4.81 5.06 5.31 5.56 5.81 6.06 6.31 6.56 6.81 7.06 7.31 7.56 8.06 8.31 8.56 8.94 9.06 9.56 10.06 10.94 12.06 12.94
part number 30051-0131-051 30051-0150-051 30051-0163-051 30051-0175-051 30051-0188-051 30051-0200-051 30051-0212-051 30051-0225-051 30051-0238-051 30051-0250-051 30051-0256-051 30051-0263-051 30051-0275-051 30051-0288-051 30051-0300-051 30051-0312-051 30051-0325-051 30051-0350-051 30051-0362-051 30051-0375-051 30051-0382-051 30051-0400-051 30051-0425-051 30051-0450-051 30051-0475-051 30051-0500-051 30051-0525-051 30051-0550-051 30051-0575-051 30051-0600-051 30051-0625-051 30051-0650-051 30051-0675-051 30051-0700-051 30051-0725-051 30051-0750-051 30051-0800-051 30051-0825-051 30051-0850-051 30051-0888-051 30051-0900-051 30051-0950-051 30051-1000-051 30051-1088-051 30051-1200-051 30051-1288-051
list each 11.82 11.82 11.82 11.82 11.82 11.82 11.82 8.13 8.13 8.35 8.35 7.92 7.92 7.92 8.03 8.03 8.13 8.13 8.45 8.45 8.56 8.56 8.56 8.56 8.56 8.67 8.67 9.20 9.20 9.31 9.31 9.42 9.42 9.52 9.52 9.52 9.63 9.63 9.74 9.74 10.06 10.06 10.14 10.17 10.70 10.91
bag qty 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
67
PART NUMBER INDEX
68
part number
page number
62 400 463 525 550 600 615 675 769 800 818 875 988 1125 1275 1450 1700 30050 30051 63004 67004 100S 206N 206S 206VO 62M 62P A-316 AA-316 AA-AL AA-BR AAL A-AL AASS ABR A-BR A-DI AHW A-PP ASS A-SS ASV-AL B-316 BAL B-AL B-ALS BATC 304 BBR B-BR BF BFFB BFFS BFGS BFHB BFHB-N BFHS BFHS-N BFMB BFMB-N BFMS BFMS-N BFP BFS BG BGN BH BHP
65 66 66 66 66 66 66 66 66 64 66 66 66 66 66 66 66 67 67 66 65 11 11 11 11 65 65 18 22 22 22 15 18, 22 17 15 18, 19 19 7 19 15 18 22 19 15, 17 19, 22 19 43 15 19 57 34 34 8 34 35 34 35 34 35 34 35 58 57 23 34 57 58
part number BHS BM BMFB BMFB-L BMFB-N BMFS BMFS-L BMFS-N BMGS BMHB BMHB-L BMHB-N BMHS BMHS-L BMHS-N BMMB BMMB-L BMMB-N BMMS BMMS-L BMMS-N BMP B-PP BSG BSGS BSS B-SS C&G-LOCKPIN C-316 C-316-C CAB CAL C-AL C-AL-C C-ALS CBB CBR C-BR C-BR-C C-DI CGSS CJDC CJDC-A CJDP CJDP-A CJFS CJFS-A CJFU CJHS CJMS CJN CJN-A CJSS CJTS CJVS CJVS-A CJWS CL-316-C CL-AL-C CLIP CPBR C-PP CSB C-S-C CSS C-SS D-316
page number
part number
page number
8 57 34 34 35 34 34 35 8 34 34 34 34 34 34 34 34 35 34 34 35 58 19 8 8 15 19 23 19, 22 18 7 15, 17 19, 22 18 19 7 15 19 18 19 18 40 40 40 40 40 40 39 39 39 40 40 39 39 39 39 39 18 18 33 17 19 7 18 15, 17 19 20
DA-316 DAAL DA-AL DA-BR DAL D-AL D-ALS DASS DBR D-BR DC-316 DCAL DC-AL DC-ALS DC-BR DC-DI DC-PP DCSBR DCSS DC-SS DD-316 DDAL DD-AL D-DI DP-316 DPAL DP-AL DP-BR DP-DI D-PP DP-PP DPSS DP-SS DSS D-SS DSV-AL E-316 E-316-C EAL E-AL E-AL-C EBR E-BR E-BR-C E-DI E-PP E-S-C ESS E-SS F F-316 F38 FAB FAL F-AL FBB FBR F-BR F-DI FE FF150S FF150SS FHAS-C FHASS-C FKM FLPS FLSS
22 17 22 22 15 20, 22 20 17 16 20 21 16 21 21 21 21 21 16 16 21 22 17 22 19, 20 21 16 21 21 21 20 21 16 21 15 20 22 20, 22 18 16 20, 22 18 16 20 18 20 20 18 16, 17 20 59 20 65 7 16 21, 22 7 16 21 21 33 12 12 12 12 23 50 51
PHONE 800-367-3678 FAX 800-367-3670 SALES@CAMPBELLFITTINGS.COM WWW.CAMPBELLFITTINGS.COM part number F-PP FPS FPS-F FPS-L FPS-S FRAC-C FS150S FS150SS FSB FSS F-SS FSS-W FT150S FT150SS FV GDC GDS GFS GFSS GHF GHM GHS GHW GJF GJF HW GJFS GJMS GJS GJSS GMS GN GWSS HAA HAB HAGS HAGS-C HAGSS HAGSS-C HAHAST HAHAST-C HALPS-C HALPS-C SW HALSS-C SW HAPS HAPS-C HAPS-C SW HAS HAS-BV HAS-C SQ HASS HASS-BV HASS-C HASS-C SQ HASS-C SW HBC HBCP HBCP-S HBJ HBJS HBPW HCB HCPS HCSS HDS HDSL HE HEPS
page number
part number
page number
part number
21 49 50 50 50 11 12 12 7 16, 49, 50 20 46 12 12 8 29 28 28 28 58 58 58 58 27 27 28 28 27, 28 28 28 29 28 5 5 5 11 5 11 5 11 11 11 11 5 11 11 5 5 11 5 5 11 11 11 64 63 63 63, 65 63 64 6 6 6 29 63 33 6
HES HESS HFS HJF HJFS HJS HMS HN HRPB HRPS HRPSS HRS HRSS IC IC-L IC-S IMS IMS HW IMSS IMSS-SW IMS-SW LHRPSS MA MB ME MS NBPCT NS NSTA NSTB NSTD PCTF PCTFPH PCTGB PCTGS PCTM-C RATC 316 RGJF RGJFSS RGJS RGJSS RGN RGNSS RHJF RHN RHS RN RNS SAL SAN SC SGPC SHS SJMSS SL SM SPS SPS-S SSM SSS ST SW TCB TCC TC-C TC-C A316 TCC-BT
6 6 29 29 29 29 29 29 23 5 23 5 5 29 29 29 27, 28 27 27, 28 27 27, 28 23 7 7 33 7 46 6 7 7 7 46 46 46 46 46 43 27 27 27 27 28 28 29 29 8 6 6 52 44 66 18 8 28 66 57 51, 53 53 57 52, 53 64, 65 7 45 45 44 43 45
TCC-DP TCC-SQ TCF 316 TCGB TCGB-W TCGE TCGS TCGT TCGV TCLW 316 TCM 316 TCR-316 TCR-C TCSW 316 TF TF-N TFSS TG TGN THAS-C THASS-C THS TLF TLF-L TLF-N TLFSS TLH TLHB TLHB_N TLH-L TLH-N TLHSS TLM TLM-L TLM-N TLMSS TM TM-N TMSS UF UFSS UG UH UH-C UH-i UHSS ULF ULH ULM ULW UM UMSS VG VO WC WDESS WDSS WN
page number 45 45 43 45 45 45 45 45 45 43 43 45 44 43 35 36 35 23 36 12 12 8 35 35 36 35 35 35 36 35 36 35 35 35 36 35 35 36 35 33 33 33 33 33 33 33 33 33 33 33 33 33 23 29 29 44 44 7
69
ALPHABETICAL INDEX Air Hammer Couplings Ball & Socket Couplings Band Clamps and Tools Barbed Insert Fittings (Steel, Brass, Stainless) Brass Push-on Fittings Cam & Groove Couplings, Insta-Lock Cam & Groove Couplings, Standard COBRA Cam & Groove Couplings, Campbell COBRA Cam & Groove Gaskets and Handles Campbell Coupling Selection Guide ChemJoint Male Stems ChemJoint Viton Seal Couplings Clamps, Band Clamps, Double-Bolt (imported) Clamps, Interlocking 360 U-Bolt Clamps, Spiral Clamps, T-Bolt Clamps, Worm Gear Combination Nipples Cone Strainers (for use with Part C's) Crimpnology Nipples Double-Lock Couplings Ferrules, All Crimpnology Ferrules, Brass Ferrules for Campbell COBRA Ferrules for ChemJoint Viton Seal Couplings Ferrules for Crimpnology Nipples Ferrules, Light Duty Ferrules for Viton Seal Ground Joint Couplings Flanges Foot Valves Garden Hose Couplings Glossary of Campbell Crimpnology Terms Ground Joint Couplings, Campbell Viton Seal Ground Joint Couplings with Staked Ferrule HeatWave Hose Unions Interlocking Male Stem with Staked Ferrule Interlocking U-Bolt Clamps Male Stems, ChemJoint Male Stems, Interlocking Male Swivel Crimpnology Nipples Menders NST Suction Hose Couplings Nitrogen Couplings PCT Fittings Reducing Nipples Sanitary Hose Adapters Sanitary Tri-Clamp Fittings Sanitary Tri-Clamps Sanitary Machined Ferrules Sight Glass Single-Lock Couplings Sleeves for Cam & Groove Couplings Sleeves, All Crimpnology Sleeves for Suction Hose Couplings Sleeves for Ball & Socket Couplings Strainers Suction Hose Couplings Suction Hose Couplings (imported)
70
29 8 63-65 57 58 17 18-22 18 23 1 39 39-40 63 66 30 66 67 65-66 5-6 18 11-12 35-36 49-50 59 49-50 49-50 49-50 50-51 50 12 8 58 54 27-28 27 27 11 27 30 39 27 11 6 7 34-36 46 6 43 43, 44 45 44 18 34-35 51-52 51-52 53 53 8 7 7
Swivel Crimpnology Nipples Swivel Male Stems TOE Nipples Universal Couplings, Campbell Universal Couplings (standard imported) UniversaLock Couplings Whip Check Safety Cables Wine Fittings Wine Ferrules Worm Gear Clamps Wrenches (Spanner & Hydrant)
11 27 6 33 33 33 30 46 46 65-66 8
WE WORK GREAT UNDER PRESSURE!
Our Guarantee of Quality WARRANTY – Campbell Fittings, Inc. warrants the products described herein to be free from defects in materials or workmanship for a period of one year from the date of shipment by Campbell Fittings, Inc. under normal use and service. The obligation under this warranty is limited to replacing or repairing, without charge, any part supplied by Campbell Fittings, Inc. proven to have been defective at time of shipment, and is expressly conditioned on the Purchaser’s giving Campbell Fittings, Inc. immediate notice upon discovery of the defect. Campbell Fittings, Inc. shall have the option of requiring the return of the defective material (transportation prepaid) to establish the claim. This warranty shall not apply if the product has been altered or repaired by others, and Campbell Fittings, Inc. shall make no allowance or credit for such repairs or alterations unless authorized in writing by Campbell Fittings, Inc. The foregoing warranty is the only warranty applicable to the products described herein, and any previous agreements, representations or warranties, oral or written, are hereby cancelled. No other expressed or implied warranties shall apply, including but not limited to implied warranties of merchantability and fitness for a particular use. Under no circumstances will Campbell Fittings, Inc. assume any liability whatsoever for any consequential or contingent damages. PRODUCT CHANGES – The right is reserved to make changes in pattern, design or material when deemed necessary, without notice. Products which have become obsolete by reason of design change or discontinued as a manufactured item may not be returned for credit. RETURNED GOODS – Materials must not be returned unless consent has first been obtained in writing from Campbell Fittings, Inc. All materials approved for return must arrive properly packaged and pass our inspection criteria before credit will be issued. Returned products are subject to restocking fees. RESPONSIBILITY – We will not be responsible for delays resulting from strikes, accidents, negligence of carriers, or other causes beyond our control. RISK – All goods are at the risk of the Purchaser after they have been delivered to the carrier and receipt obtained for same (in good order). ORDERS – Are subject to acceptance at Campbell Fittings, Inc., Boyertown, PA 19512. SPECIAL PRODUCTS – Requests for cancellation of orders made to customer’s specifications are not refundable and will not be considered if the manufacture of material is in process when the request is made. ERRORS, SHORTAGES, ETC. – Claims for errors, shortages, etc. must be made on receipt of goods, otherwise no allowance will be made. PRICES AND QUOTATIONS – All prices and quotations are subject to change without notice. TAXES – Any tax that may be imposed by law on the sale of articles made or sold by this company shall be added to the sale price of such articles. LIABILITY WARNING – Campbell Fittings, Inc. has no warranty applicable to fitness for the purpose of a particular use of any of the products it sells or issues as samples and shall not be responsible for any loss involving its products. It is entirely the responsibility of the end user or installer to be sure that fittings, hose, and their applications are compatible.
Campbell Fittings
71
Initially Issued: 04/09/2021
Certificate No.: 70
3-A Sanitary Standards, Inc. Replacement Parts and System Component Qualification Certificate
This Is To Acknowledge That
Campbell Fittings 301 S. Washington St, Boyertown, PA 19512 Has successfully met the requirements of the Replacement Parts and System Component Qualification Certificate program for:
Type of Part(s): 3-A RPSCQC for (00-00) General Requirements,3-A RPSCQC for (62-02) Hose Assemblies,3-A RPSCQC for (63-03) Sanitary Fittings Model Designations: Stainless Steel Sanitary TC Fittings and Machined Ferrules (CIP) Master List 1. Brewery Hose Adapter Tri-Clamp 304: BATC-4, BATC-6, BATC-8, BATC-12 and BATC-16 2. Rubber Hose Adapter Tri-Clamp 316: RATC-4X2, RATC-4x3, RATC-4, RATC-6x2, RATC-6x58, RATC-6x3, RATC-6x4, RATC-6, RATC-8x6, RATC-8, RATC-10, RATC-12 and RATC-16 3. Tri-Clamp Short Weld 316: TCSW-2, TCSW-3, TCSW-4, TCSW-6, TCSW-8, TCSW-10, TCSW-12 and TCSW-16 4. Tri Clamp Long Weld 316: TCLW-2, TCLW-3, TCLW-4, TCLW-6, TCLW-8, TCLW-10, TCLW-12 and TCLW-16 5. Tri-Clamp Crimp Hose Ends 316: TC-4C, TC-6C, TC-8C, TC-10C, TC-12C, TC-16C and TCR6X4C 6. Machined Ferrules 304: SAN100, SAN150, SAN200, SAN250, SAN300 and SAN400
Valid through: December 31, 2021
Timothy R. Rugh
Executive Director, 3-A sanitary Standards, Inc. ***** The issuance of this certificate is based upon the voluntary certification, by the applicant for it, that the processing system listed herein conforms to the applicable provisions of the currently effective 3-A Standard(s) or 3-A Accepted Practice(s). Legal responsibility for conformance is solely that of the holder of this Certificate. 3-A Sanitary Standards, Inc. does not warrant that the holder of a certificate at all times conforms to the applicable provisions of the said 3-A Accepted Practice. This in no way affects the responsibility of 3-A Sanitary Standards, Inc. to take appropriate action in such cases in which evidence of nonconformance has been established.
Next TPV Inspection/Report due: April 2026
72
PERRY JOHNSON REGISTRARS, INC.
Campbell Fittings, Inc
301 South Washington Street, Boyertown, PA 19512 United States (This is a campus scheme. See Appendix for site specific details.)
ISO 9001:2015
Design and Manufacturing of Industrial Hose Fittings, Couplings, Ferrules, and Sleeves
Terry Boboige, President Perry Johnson Registrars, Inc. (PJR) 755 West Big Beaver Road, Suite 1340 Troy, Michigan 48084 (248) 358-3388
The use of the UKAS accreditation symbol is in respect to the activities covered by the Accreditation Certificate Number 0105.
Effective Date: November 20, 2018 Expiration Date: November 19, 2021
Certificate No.: C2018-04485 Page 1 of 2
73
Manufacturing & Offices:
U.S. and Canada:
Campbell Fittings, Inc.
phone 800.367.3678
Box 417
fax 800.367.3670
301 S. Washington St.
email sales@campbellfittings.com
Boyertown, PA 19512
website campbellfittings.com
Warehouse Locations:
International:
Boyertown, PA
phone 610.367.6916
Houston, TX
fax 610.367.0689 email sales@campbellfittings.com
Affiliations:
June 2021 v1