Eaton Aeroquip High Performance Racing Hose Fittings and Adapters PDF Catalog Catalogue

AeroquipÂŽ Performance Products by Eaton

Setting the bar for the competition.

Black Anodized SOCKETLESS™ Hose Fittings

­

Eaton’s AQP SOCKETLESS Performance Hose and Fittings are extremely easy to work with. Connecting the two is a snap since not even a wrench is needed! Simply slip the hose onto the fittings. It’s that simple. Also available in electroless nickel plating or red/blue anodized finish.

Benefits

• • • •

• Lightweight and economical.

• Soaking or warming hose is not necessary.

• No additional band clamps are necessary

Applications

• Gasoline, fuel and lubricating oils.

• Air and water.

Cap is anodized aluminum, not plastic Unique 3-barb fitting in –10 and –12 sizes –06 and –08 feature 2 barbs Easy to assemble, no wrench required.

• No clamp needed.

• Reusable.

• One-piece design.

• Allows for improved flow.

• Eliminates two potential leak points (brazed joints).

Features

See page 11

624 Firesleeve

• Ease of installation: 624 Firesleeve can be slid over line or cable before, during, or after construction or during a line or cable replacement • Standard sizes available: .31 inch to 3.75 inches ID.

Features

Benefits • Protection of lines that carry hot or volatile fluids • Protection of lines, cable, and pipe in hostile environments where there is: • Exposure to excessive vibration friction • Exposure to molten steel • Exposure to industrial solvents • Exposure to temperature extremes

624 Firesleeve is a silicone-coated, braided-glass sleeving manufactured using a unique proprietary process. The durable rubber finish resists tears and abrasion in addition to providing a reliable, no-slip clamping surface. Firesleeve hose flame shield can prevent or delay hose lines from burning. See hose specifications shown in this catalog for the correct firesleeve to match each hose size. For other hose styles, select firesleeve with an I.D. slightly larger than the hose O.D.

INTRODUCTION

SPOTLIGHT

See page 37 ET1000 — Portable Crimp Machine Relaunched with a sleek new housing, the new high performance crimper will compliment your high performance shop, race trailer, or garage.

Features

• Pusher slides out of position.

• Red power coated housing protects user from moving machinery and providesx a sleek, aerodynamic design • Crimper body has a clear zinc finish to protect against corrosion.

• Utilizes 2-piece collet assemblies.

• Spacer rings control the crimp diameter.

• Qualified to crimp Aeroquip’s top selling hoses: AQP Stainless Braid, StartLite, and Teflon hoses with Aeroquip’a qualified aluminum crimp fittings.

Benefits • Sliding pusher allows for easier fitting insertion into the machine.

• Simple positive-stop crimp diameter control system for consistent crimping time after time with no operator adjustments required.

• Easily transported between job sites.

• Versatile power source options.

Electricity is required only when using an electric style pump.

www.aeroquipperformance.com

See page 42

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

IF21

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

INTRODUCTION

.

Application Guide ............................................................................................................................................................

3

.

AQP® and StartLite® Racing Hose and Fittings ..................................................................................................................... 6 .

AQP®SOCKETLESS™ Hose and Fittings................................................................................................................................. 11 .

A/C Hose and Fittings ................................................................................................................................................................. 13 .

Racing Hose, Teflon* and Fittings............................................................................................................................................ 15 .

Pre-Made Off-Road Brakelines and Power Trim Assemblies ...................................................................................... 17 .

High Pressure (Power Steering) Hose and Fittings ........................................................................................................... 18 .

Adapters .......................................................................................................................................................................................... 19 .

Fuel System Components ......................................................................................................................................................... 31 .

Couplings......................................................................................................................................................................................... 35 .

Accessories...................................................................................................................................................................................... 37

INTRODUCTION

Table of Contents

Assembly Equipment.................................................................................................................................................................. 40 .

Assembly Instructions.................................................................................................................................................................. 44 .

Technical Data ............................................................................................................................................................................... 49 .

Plan-O-Grams................................................................................................................................................................................ 56 .

Part Number Index ...................................................................................................................................................................... 57 Warranty

For warranty information, please visit www.eaton.com/hydraulics/warranty

Warning

Eaton fitting tolerances are engineered to match Eaton hose tolerances.

The use of Eaton fittings on hose supplied by other manufacturers and/ or the use of Eaton hose with fittings supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Eaton.

EATON SHALL NOT BE SUBJECT TO AND DISCLAIMS ANY OBLIGATION OR

AND IN CONFORMANCE WITH EATON PROCESS AND PRODUCT INSTRUCTIONS FOR EACH SPECIFIC HOSE ASSEMBLY. Failure to follow Eaton process and product instructions and limitations could lead to premature hose assembly failures resulting in property damage, serious injury or death.

Note: Part numbers in this bulletin are not certified or recommended for aircraft applications. ­

­­

LIABILITIES (INCLUDING BUT NOT LIMITED TO ALL CONSEQUENTIAL, INCIDENTAL AND CONTINGENT DAMAGES) ARISING OUT OF BREACH OF CONTRACT OR OF WARRANTY OR ARISING FROM TORT CLAIMS (INCLUDING WITHOUT LIMITATION NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW WITH RESPECT TO ANY HOSE ASSEMBLIES NOT PRODUCED FROM GENUINE EATON APPROVED EQUIPMENT,

*Teflon is a registered trademark of DuPont and under license by Eaton.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

21

NA TT R IOODNU G CU T II O A P P L IIC DN E

APPLICATION GUIDE AQP® Racing Hose

• Aeroquip Performance Product’s most popular racing hose • Stainless Steel outer cover for excellent abrasion resistance • Excellent pressure rating (1000 psi -04 to -12)

• AQP elastomer smooth bore inner tube • -45°F to +300°F temperature rating • Approved with reusable and crimp fittings • Full vacuum sizes, -10, -12, and -16

• Applications: fuel, lube, coolant and air lines

• Aeroquip Performance Product’s popular lightweight racing hose • Up to 45% lighter than stainless steel braided hose • 350-500 psi pressure ratings

• Flame retardant Nomex* cover with Kevlar* • AQP elastomer smooth bore inner tube • -45°F to +300°F temperature rating • Approved with reusable and lightweight crimp fittings

• Applications: fuel, lube, coolant and air lines

• Easy to assemble with reusable SOCKETLESS fittings • Textile braid reinforcement available in a blue or black AQP elastomer cover • AQP elastomer smooth bore inner tube

• -45°F to +300°F temperature rating • Available in sizes blue -04 to -12; black -06 to -12 • Vacuum rated up to 28 in.

Hg. in sizes -04 to -08 • Operating pressure for all sizes at 250 psi • Never needs a clamp

• Applications: fuel, lube, coolant and air lines

• Stainless steel braided for a professional and custom look • Nylon inner tube for superior refrigerant performance

• Extensively lab and field tested with R134a refrigerants • Specifically designed for use with our A/C fittings to provide a superior performing combination

• Applications: air conditioning lines

• Superior fluid compatibility, abrasion and corrosion resistance for reliable service • Stainless steel outer cover for excellent abrasion resistance

• Extruded Teflon* smooth bore inner tube • -100°F to +450°F temperature rating • Approved with reusable and crimp fittings • Excellent pressure rating (2500 psi in dash -06)

• Applications: off road brake, transmission, clutch, gauge, N2O, power steering, hydraulic, air conditioning

• Your best choice for high pressure applications • Excellent pressure rating (2250 psi in dash -06) • Abrasion resistant fabric cover

• AQP elastomer smooth bore inner tube • -45°F to +300°F temperature rating • Approved with reusable steel fittings

• Applications: power steering, hydraulics, fuel, lube, coolant, air tools and DOT approved air brakes

See page 6 StartLite® Racing Hose

See page 6

AQP® SOCKETLESS™ Racing Hose

See page 11 A/C Hose

See page 13 Racing Hose, Teflon* (Off-Road Brake and Power Trim Lines)

See page 15 AQP® High Pressure Hose (Power Steering)

See page 18 *Nomex, Kevlar and Teflon are DuPont trademarks and under license by Eaton.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

23

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

APPLICATION GUIDE (CONT.)

• Approved hose styles • AQP® Stainless Steel Racing Hose • StartLite® Racing Hose

• No seal is broken between nipple and tube when swiveled due to nipple design; ensuring integrity of the seal • Compression style specially designed for performance applications • Wide range of applications

­

• One-piece design • Allows for improved flow • Eliminates two potential leak points (brazed joints) • Significantly improved appearance • Electroless nickel plating, red/blue and black anodized finish • Swivel and non-swivel styles available • Designed to be re-used without damage to the fitting • Easier to install than cutter style, more user friendly.

See page 50 for details • Nipple pilot prevents damage to the inner tube

See pages 7-10

• Approved hose styles • AQP® Stainless Steel Racing Hose • StartLite® Racing Hose

• Assembled with ProCrimp® crimp machines

• Lightweight and easy to use design • One-piece design • Allows for improved flow • Available in swivel and non-swivel • Eliminates two leak points (brazed joints) • Significantly improved appearance

Crimp Aluminum Fittings (lightweight)

IANPTPRLOI C DA UT CITOI N O NG U I D E

Reusable Aluminum Fittings

See pages 7-10

• Approved hose styles • AQP® SOCKETLESS Racing Hose

• Significantly improved appearance • Electroless nickel plating or red/blue anodized finish

• Used with AQP SOCKETLESS hose • Easy to assemble, no wrench required • No clamp needed • Reusable • One-piece design • Allows for improved flow • Eliminates two potential leak points (brazed joints)

Aluminum SOCKETLESS™ Fittings

See page 12

• O-ring ferrule ensures a superior seal when assembled with our A/C hose

• Approved hose styles • A/C Racing Hose

• Nickel plated for an eyeappealing look and corrosion resistance • Reusable to allow you to make your own assemblies • Available refrigerant charge ports to allow you to position the ports where you want them • Female O-ring pilot terminal ends fit perfectly with the majority of A/C components

A/C Fittings

See page 14

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

43

Compression-Style Design Provides Simple, Troublefree Assembly Eaton’s Compression and more forgiving than Style Design cutter-style fittings. A comparison of the two styles is shown at right.

For applications • Designed to be re-used involving methanol without damage to the and nitromethane fuel fitting mixtures, Aeroquip offers • Nipple pilot prevents zinc-plated carbon steel damage to the inner fittings designed precisetube ly for these situations.

These fittings feature a • More user friendly, for steel nipple, nut and consistently excellent tube with an anodized hose/fitting connections aluminum hose socket.

• Nipple does not move High quality aluminum with this design on carburetor adapters and swivel fittings banjo fittings are also available.

Stainless steel

­

Eaton’s Aeroquip Performance Products anodized aluminum reusable fittings are engineered to match Eaton hose tolerances, providing matchless performance. The smooth tube design allows excellent fluid flow. Their compressionstyle design provides simple, troublefree assembly.

Eaton’s compression style design was specially designed for performance applications. They are reliable, easier to use ­

NA TT R IOODNU G CU T II O A P P L IIC DN E

APPLICATION GUIDE (CONT.)

lock wires

Piloted nipple

Competition’s Cutter Style Design

• Cutting edge dulls with each use, which can cause an incomplete connection.

• For re-use the inner tube must be removed from the lip seal area without damage to the cutter.

A damaged or dull cutter can mean a leaky fitting.

• Excessive lube oil applied during installation can cause hydraulic lock in the lip seal area, preventing complete fitting connection.

• When used with swivel style fittings, the nipple moves Constructed of inside the hose, high quality 6061 disrupting the integrity aluminum alloy of this critical seal.

Swivel design eliminates the movement of the nipple within the hose Constructed of high quality 2024 aluminum alloy

One-Piece Design*

Uniform wall thickness

• Allows for improved flow • Eliminates two leak points (brazed joints) • Significantly improved appearance

Uninterrupted flow

No vulnerable braze joints *Available in the majority of Aeroquip Performance Products aluminum fittings.

Contact Eaton for additional information.

Uninterrupted flow

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

45

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

AQP® RACING HOSE AND FITTINGS STARTLITE® RACING HOSE AND FITTINGS Great Looks, Proven Performance.

tion

Hose Max. Max. Weight Dash Hose Hose Operating Bend Per Size I.D. O.D. Pressure Radius Foot

INCHES INCHES PSI -04 .22 .44 1000/7501 -06 .34 .55 1000/7501 -08 .44 .65 1000/7501 -10 .56 .80 1000/7501 -12 .69 .94 1000/7501 -16 .88 1.15 750/7501 -20 1.13 1.41 500 -24 1.34 1.70 50 -32 1.75 2.09 50

­

lasting durability. AQP Racing Hose also features an AQP elastomer inner tube that is resistant to oxidation, the effects of ozone and other various agents present in the air. Changes in physical properties due to shelf aging are nonexistent.

Applications: Fuel, lube, coolant, air

ordering Information

s O

ca

i i f

Sp

ec

se

Ho

Stainless steel braid for superior performance.

AQP Racing Hose is compatible with petroleum and synthetic lubricants, hydrocarbon fuels and liquid engine coolants. It operates at higher temperatures for longer periods. Light and flexible, it is easy to work with, and its stainless steel cover will ensure long-

Bulk Vacuum Part Service Number Package Length Part Number

INCHES POUNDS INCHES/HG 2 FEET 3 FEET 6 FEET 10 FEET 15 FEET 20 FEET 50 FEET REEL 2.00 .11 21 FBA0400 — FCA0403 FCA0406 FCA0410 FCA0415 FCA0420 FCA0450 FBA0400RL 2.50 .16 21 FBA0600 — FCA0603 FCA0606 FCA0610 FCA0615 FCA0620 FCA0650 FBA0600RL 3.50 .17 21 FBA0800 — FCA0803 FCA0806 FCA0810 FCA0815 FCA0820 FCA0850 FBA0800RL 4.00 .21 28 FBA1000 — FCA1003 FCA1006 FCA1010 FCA1015 FCA1020 FCA1050 FBA1000RL 4.50 .29 28 FBA1200 — FCA1203 FCA1206 FCA1210 FCA1215 FCA1220 FCA1250 FBA1200RL 5.50 .38 28 FBA1600 — FCA1603 FCA1606 FCA1610 FCA1615 FCA1620 FCA1650 FBA1600RL 8.00 .49 21 FBA2000 — FCA2003 FCA2006 FCA2010 FCA2015 FCA2020 — — 9.00 .80 21 FBA2400 FCA2402 FCA2403 FCA2406 — — — — — 12.50 .98 15 FBA3200 FCA3202 FCA3203 FCA3206 — — — — —

Construction: AQP elastomer inner tube, partial stainless steel wire inner braid and a full stainless steel outer braid reinforcement.

Temperature Range: Continuous operating temperature from -55°F to +300°F (-49°C to +150°C). See Page 31 for banjo fitting for fuel systems.

The Professional’s Choice.

• Three to five times better abrasion protection* • Fastest and easiest crimp machine on the market (FT1380) • Non-swivel and swivel crimp fittings (no phase angles to calculate) • Rated to 20 in/Hg or 28 in/Hg with stainless steel support coil Applications: • Fuel, lube, coolant and air lines

tion

s O

i i

ca

Sp

f

se

Ho

ec

­

Features: • Up to 45% lighter than stainless steel braided hose • Flame retardant Nomex and Kevlar cover • AQP smooth bore inner tube • -45° to 300°F temperature rating • Flexible band radius • Race proven — approved by NASCAR, NHRA, IHRA, ADRL and other sanctioning bodies

STARTLITE® RACING HOSE

The lightweight alternative — 45% lighter than AQP ® Racing Hose — made in the U.S.A.

IN IHNOTSREO & D UFCI T T IO NG S

AQP® RACING HOSE

The most popular racing hose in the market for over 60 years — made in the U.S.A.

ordering Information

Hose Max. Min. Weight Bulk Dash Hose Hose Operating Bend Per Vacuum Part Size I.D. O.D. Pressure Radius Foot Service Number

Package Length Part Number

INCHES INCHES PSI INCHES POUNDS INCHES/HG -04 .22 .43 500 2.00 .05 20 FBU0400 -06 .34 .55 500 2.50 .08 20 FBU0600 -08 .44 .64 500 3.50 .09 20 FBU0800 -10 .56 .80 500 4.00 .14 20 FBU1000 -12 .69 .93 350 4.50 .16 20 FBU1200 -16 .88 1.15 350 5.50 .19 20 FBU1600 -20 1.13 1.41 350 5.50 .25 20 FBU2000 Construction: AQP elastomer inner tube and Nomex* hose construction.

Temperature Range: -45°F to +300°F (-43°C to +150°C).

3 FEET 6 FEET 10 FEET 15 FEET 20 FEET 50 FEET FCU0403 FCU0406 FCU0410 FCU0415 FCU0420 FCU0450 FCU0603 FCU0606 FCU0610 FCU0615 FCU0620 FCU0650 FCU0803 FCU0806 FCU0810 FCU0815 FCU0820 FCU0850 FCU1003 FCU1006 FCU1010 FCU1015 FCU1020 FCU1050 FCU1203 FCU1206 FCU1210 FCU1215 FCU1220 FCU1250 FCU1603 FCU1606 FCU1610 FCU1615 FCU1620 FCU1650 FCU2003 FCU2006 FCU2010 FCU2015 FCU2020 FCU2050 For ultimate weight savings, select AQP lightweight crimp fittings.

AQP® Racing and Startlite® Racing Hoses are both qualified with the same reusable and crimp fittings on the following pages.

Please see Pages 44-48 for assembly instructions. *Nomex is a Dupont trademark.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

565

DIU H OISNET R &O F TC T ITNI O GN S

AQP® RACING HOSE AND FITTINGS (CONT.) STARTLITE® RACING HOSE AND FITTINGS (CONT.)

Str ig t Fitting a

h

Reusable Black Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

Lightweight Crimp Swivel S.A.E. 37° (JIC/AN)

Aluminum Nickel-Plated Swivel S.A.E. 37° (JIC/AN)

Reusable** Steel Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

Hose Size

Packaged Part Number

Packaged Part Number

Packaged Part Number

Bulk Part Number

Bulk Part Number

-04 -06 -08 -10 -12 -16 -20

— FCM4412 FCM4413 FCM4414 FCM4415 FCM4416 —

— FCM1012 FCM1013 FCM1014 FCM1015 FCM1016 FCM1017

FCM1011 FCM1075 FCM1076 — — — —

— FCE1012 FCE1013 FCE1014 FCE1015 — —

FBM4211 FBM4212 FBM4213 FBM4214 FBM4215 FBM4216 FBM4217

30° El ow Fitting b

Reusable Back Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Non-Swivel S.A.E. 37° (JIC/AN)

Lightweight Crimp Swivel S.A.E. 37° (JIC/AN)

Lightweight Crimp Non-Swivel S.A.E. 37° (JIC/AN)

Hose Size

Packaged Part Number

Packaged Part Number

Packaged Part Number

Bulk Bulk Part Number Part Number

-06 -08 -10 -12 -16 -20

FCM4472 FCM4473 FCM4474 FCM4475 FCM4476 —

FCM4072 FCM4073 FCM4074 FCM4075 FCM4076 —

— — — — — FCM1147

FBM4272 FBM4273 FBM4274 FBM4275 — —

— — FBM4174 FBM4175 — —

TechTip Don’t Put Your Performance at Risk Don’t mix and match hose and fitting manufactures with your hose assemblies. Each manufacturer of hose and fittings builds their product to specific tolerances and does not recommend them for use with other brands. Doing this puts your performance at risk and voids any warranty on your product.

Please see Pages 44-48 for assembly instructions. **Aluminum socket

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

667

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

AQP® RACING HOSE AND FITTINGS (CONT.) STARTLITE® RACING HOSE AND FITTINGS (CONT.)

b

Reusable** Steel Non-Swivel S.A.E. 37° (JIC/AN)

Hose Size

Packaged Part Number

Packaged Part Number

Packaged Part Number

-04 -06 -08 -10 -12 -16 -20

— FCM4422 FCM4423 FCM4424 FCM4425 FCM4426 —

— FCM4022 FCM4023 FCM4024 FCM4025 FCM4026 —

Packaged Part Number

Bulk Part Number

Bulk Part Number

— FCM1022 FCM1023 FCM1024 FCM1025 FCM1026 FCM1027

FCM1021 FCM1079 FCM1080 — — — —

— FCE4022 FCE4023 FCE4024 FCE4025 — —

Lightweight Crimp Non-Swivel S.A.E. 37° (JIC/AN)

Packaged Part Number

Packaged Part Number

Packaged Part Number

Bulk Part Number

-06 -08 -10 -12 -16 -20

FCM4482 FCM4483 FCM4484 FCM4485 FCM4486 —

FCM4082 FCM4083 FCM4084 FCM4085 FCM4086 —

— — — — — FCM1148

FBM4282 FBM4283 FBM4284 FBM4285 — —

Hose Size

Lightweight Crimp Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Non-Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

— FBM4222 FBM4223 FBM4224 FBM4225 FBM4226 —

b

60° El ow Fitting Reusable Black Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

Packaged Part Number

Lightweight Crimp Non-Swivel S.A.E. 37° (JIC/AN)

Lightweight Crimp Swivel S.A.E. 37° (JIC/AN)

Nickel-Plated Aluminum Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Non-Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

Reusable Black Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

FBM4121 — — FBM4124 FBM4125 — FBM4127

IN IHNOTSREO & D UFCI T T IO NG S

45° El ow Fitting

TechTip Weight Savings

Up to 12 lbs can be saved by using StartLite hose assemblies in lieu of a stainless steel braided hose assemblies on the average circle track car.

Bulk Part Number — — FBM4184 FBM4185 — —

B Fitting Thread Size

FBM1348 FBM1349 FBM1350 FBM1351 FBM1352 FBM1353

9⁄16-18 3⁄4-16 1 1⁄16-12 7⁄8-14 7⁄8-14 1 1⁄16-12

Bulk Part Number

-08 -08 -10 -10 -12 -12

Reuseable Aluminum Swivel O-ring Hose Size

45°

OR

Direct Port Fitting

Please see Pages 44-48 for assembly instructions. **Aluminum socket Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

787

Packaged Part Number

Bulk Part Number

— FCE4032 FCE4033 FCE4034 FCE4035 — —

Reusable Red/Blue Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Non-Swivel S.A.E. 37° (JIC/AN)

Lightweight Crimp Swivel S.A.E. 37° (JIC/AN)

Lightweight Crimp Non-Swivel S.A.E. 37° (JIC/AN)

Packaged Part Number

Packaged Part Number

Packaged Part Number

Bulk Part Number

Bulk Part Number

— FCM4442 FCM4443 FCM4444 FCM4445 FCM4446 —

— FCM4042 FCM4043 FCM4044 FCM4045 FCM4046 —

— FCM1042 FCM1043 FCM1044 FCM1045 FCM1046 FCM1047

— FBM4242 FBM4243 FBM4244 FBM4245 FBM4246 —

FBM4141 — — FBM4144 FBM4145 — —

FBM4131 — — FBM4134 FBM4135 — FBM4137

— FBM4232 FBM4233 FBM4234 FBM4235 FBM4236 —

FCM1031 FCM1083 FCM1084 — — — —

Bulk Part Number

— FCM1032 FCM1033 FCM1034 FCM1035 FCM1036 FCM1037

— FCM4032 FCM4033 FCM4034 FCM4035 FCM4036 —

— FCM4432 FCM4433 FCM4434 FCM4435 FCM4436 —

-04 -06 -08 -10 -12 -16 -20

Packaged Part Number

Packaged Part Number

Packaged Part Number

Packaged Part Number

Hose Size

Lightweight Crimp Non-Swivel S.A.E. 37° (JIC/AN)

Lightweight Crimp Swivel S.A.E. 37° (JIC/AN)

Aluminum Nickel-Plated Swivel S.A.E. 37° (JIC/AN)

Reusable** Steel Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Non-Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

Reusable Black Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

b

90° El ow Fitting

90°

FBM1355 FBM1356 FBM1357 FBM1358 FBM1359 FBM1360

-08 -08 -10 -10 -12 -12

Bulk Part Number

OR

3⁄8 NPTF 1⁄2 NPTF 3⁄4 NPTF

B Fitting

Reuseable Aluminum Swivel O-ring Hose Size

Pipe Thread Size

FCM1343 FCM1344 FCM1345

Packaged Part Number

-06 -08 -12

Reusable Aluminum Swivel Male Pipe Hose Size

ITTING

ip F e

P

e

Ma

l

P

Direct ort Fitting

90°

P

Direct ort Fitting

-04 -06 -08 -10 -12 -16 -20

Hose Size

Reusable Black Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

b

120° El ow Fitting

DIU H OISNET R &O F TC T ITNI O GN S

AQP® RACING HOSE AND FITTINGS (CONT.) STARTLITE® RACING HOSE AND FITTINGS (CONT.)

Thread Size 9⁄16-18 3⁄4-16 1 1⁄16-12 7⁄8-14 7⁄8-14 1 1⁄16-12

Please see Pages 44-48 for assembly instructions. **Aluminum socket

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

889

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

AQP® RACING HOSE AND FITTINGS (CONT.) STARTLITE® RACING HOSE AND FITTINGS (CONT.)

& UFCI T ITOI N IHNOTSREO D NG S

b

150° El ow Fitting

Packaged Part Number

Packaged Part Number

Packaged Part Number

Bulk Part Number

-04 -06 -08 -10 -12 -16

— FCM4452 FCM4453 FCM4454 FCM4455 FCM4456

— FCM4052 FCM4053 FCM4054 FCM4055 FCM4056

— FCM1052 FCM1053 FCM1054 FCM1055 FCM1056

FBM41511 FBM4252 FBM4253 FBM4254 FBM4255 FBM4256

Reusable Red/Blue Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Non-Swivel S.A.E. 37° (JIC/AN)

Lightweight Crimp Swivel S.A.E. 37° (JIC/AN))

Packaged Part Number

Packaged Part Number

Bulk Part Number

FCM1062 FCM1063 FCM1064 FCM1065 FCM1028

— FBM4263 FBM4264 FBM4265 FBM4266

Hose Size

Lightweight Crimp Swivel S.A.E. 37° (JIC/AN))

Reusable Red/Blue Anodized Aluminum Non-Swivel S.A.E. 37° (JIC/AN)

Reusable Red/Blue Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

Reusable Black Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

FCM4062 FCM4063 FCM4064 FCM4065 FCM4066

FCM4462 FCM4463 FCM4464 FCM4465 FCM4466

-06 -08 -10 -12 -16

Packaged Part Number

Hose Size

Reusable Black Anodized Aluminum Swivel S.A.E. 37° (JIC/AN)

b

180° El ow Fitting

TechTip Routing Made Easy with Swivel Design

­

Many hose assemblies require angled fittings on both ends to make a connection. Our angled fittings all have a swivel option that eliminates the need to calculate phase angles when attaching the ends and makes installation easier.

Please see Pages 44-48 for assembly instructions.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

109

AQP® SOCKETLESS™ HOSE

A Lightweight and Economical Choice

The fastest and easiest to assemble.

Quick and easy assembly that can save you time.

Eaton’s AQP SOCKETLESS Performance Hose and Fittings are extremely easy to work with. Connecting the two is a snap since not even a wrench is needed! Simply slip the hose onto the fittings. It’s that simple. ­

Applications: Gasoline, fuel and lubricating oils, air and water.

REEL

— FCV0615 FCV0815 FCV1015 FCV1215

— FCN0620 FCN0820 FCN1020 FCN1220

— FBV0600RL1 FBV0800RL2 — —

— FCV0620 FCV0820 FCV1020 FCV1220

— FCN0615 FCN0815 FCN1015 FCN1215

— FBN0600 FBN0800 FBN1000 FBN1200

Black 20 FEET

Package Length Part Number Blue Black Blue 15 FEET 15 FEET 20 FEET

FBV0400 FBV0600 FBV0800 FBV1000 FBV1200

28 28 28 18 18

250 250 250 250 250

.49 .62 .75 .91 1.03

3.00 3.00 5.00 6.00 7.00

.25 .38 .50 .63 .75

INCHES INCHES/HG

INCHES INCHES PSI

-04 -06 -08 -10 -12

a

f

I

Bulk Part Number Blue Black

Vacuum Service*

Max. Min. Operating Bend Pressure Radius

Hose O.D.

ring n orm tion

de

s O

r

ca

tion

Hose I.D.

Hose Dash Size

f

i i

ec

Sp

se

Ho

DIU H OISNET R &O F TC T ITNI O GN S

AQP® SOCKETLESS™ HOSE AND FITTINGS

emperature ange: -40°F to +300°F (-40°C to +150°C). Air not to exceed +250°F (+121°C) and water not to exceed +180°F (+82°C).

R

1Order in 560-foot increments.

Features: • Easy to assemble and disassemble

• Reusable • Operating pressure for all sizes at 250 psi

­

2Order in 600-foot increments.

• No socket wrench required

• Never uses a clamp

h

tr ig t Fitting SOCKETLESS SOCKETLESS Nickel-Plated Aluminum Brass S.A.E. 37° (JIC/AN) Male Pipe

Hose Size

Bulk Part Number

Packaged Part Number

Packaged Part Number

Packaged Part Number

Bulk Part Number

Thread Bulk Size Part Number

-04

—

—

—

—

FBM1200 FBM1201

1⁄8 1⁄4

FBL1512

FCL1512

FCM1512

FCE1512

FBM1207 FBM1202

FBL1513

FCL1513

FCM1513

FCE1513

-10

FBL1514

FCL1514

FCM1514

-12

FBL1515

FCL1515

FCM1515

FBM1231*

FBM1211

1⁄4 3/8

FBM1445

FBM1222

FBM1212

FBM1206 FBM1203

3/8 1/2

—

FBM1233*

FBM1213

FCE1514

FBM1204

1/2

—

FBM1234*

FBM1214

FCE1515

FBM1205

3/4

—

FBM1225

—

FBM1444

*These

Bulk Part Number

-08

SOCKETLESS Brass Male Inverted Flare

Pipe Bulk Part Number

-06

SOCKETLESS SOCKETLESS Brass Male Flare Brass Swivel S.A.E. 37° (JIC/AN) S.A.E. 37° (JIC/AN)

SOCKETLESS Red/Blue Anodized Aluminum S.A.E. 37° (JIC/AN)

SOCKETLESS Black Anodized Aluminum S.A.E. 37° (JIC/AN)

a

s

• Lightweight

T

Construction: AQP elastomer inner tube, textile braid reinforcement, AQP elastomer cover.

fittings mate with both 37° and 45° male flares.

AQP® SOCKETLESS™ hose is qualified with the SOCKETLESS fittings above and on the following page.

Please see Pages 44-48 for assembly instructions.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

10 10 11

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

AQP® SOCKETLESS™ HOSE AND FITTINGS (CONT.)

b

Packaged Part Number

Packaged Part Number

Bulk Part Number

— FCM1522 FCM1523 FCM1524 FCM1525

— FCE1522 FCE1523 FCE1524 FCE1525

FBM1438 FBM1439 FBM1440 — —

SOCKETLESS Red/Blue Anodized Aluminum S.A.E. 37° (JIC/AN)

SOCKETLESS Nickel-Plated Aluminum S.A.E. 37° (JIC/AN)

SOCKETLESS Steel Swivel S.A.E. 37° (JIC/AN)

Packaged Part Number

Packaged Part Number

Bulk Part Number

— FCM1532 FCM1533 FCM1534 FCM1535

— FCE1532 FCE1533 FCE1534 FCE1535

FBM1441 FBM1442 FBM1443 — —

SOCKETLESS Steel Swivel S.A.E. 37° (JIC/AN)

— FCL1522 FCL1523 FCL1524 FCL1524

SOCKETLESS Nickel-Plated Aluminum S.A.E. 37° (JIC/AN)

-04 -06 -08 -10 -12

Packaged Part Number

Hose Bulk Size Part Number — FBL1522 FBL1523 FBL1524 FBL1524

SOCKETLESS Red/Blue Anodized Aluminum S.A.E. 37° (JIC/AN)

SOCKETLESS Black Anodized Aluminum S.A.E. 37° (JIC/AN)

b

SOCKETLESS Red/Blue Anodized Aluminum S.A.E. 37° (JIC/AN)

SOCKETLESS Black Anodized Aluminum S.A.E. 37° (JIC/AN)

-06 -08 -10 -12

A

Packaged Part Number

FCL1552 FCL1553 FCL1554 FCL1555

FCM1552 FCM1553 FCM1554 FCM1555

H -08 to

-061

SOCKETLESS Brass Female Flare

Packaged Part Number

Packaged Part Number

FBL1552 FBL1553 FBL1554 FBL1555

-06

FCL1562 FCL1563 FCL1564 FCL1565

-06 -08 -10 -12

Packaged Part Number

Hose Bulk Size Part Number

Hose Size

FBL1562 FBL1563 FBL1564 FBL1565

S

180° El ow Fitting

Hose Bulk Size Part Number

Bulk Part Number

Thread Size

FBM1232

3⁄4-16

FCM1542 FCM1543 FCM1544 FCM1545

FBL1542 FBL1543 FBL1544 FBL1545

Packaged Part Number

FCL1542 FCL1543 FCL1544 FCL1545

-06 -08 -10 -12

Packaged Part Number

T

Hose Bulk Size Part Number

IG

SOCKETLESS Red/Blue Anodized Aluminum S.A.E. 37° (JIC/AN)

TR

SOCKETLESS Black Anodized Aluminum S.A.E. 37° (JIC/AN)

b

SOCKETLESS Red/Blue Anodized Aluminum S.A.E. 37° (JIC/AN)

150° El ow Fitting

b

SOCKETLESS Black Anodized Aluminum S.A.E. 37° (JIC/AN)

120° El ow Fitting

— FBL1532 FBL1533 FBL1534 FBL1534

— FCL1532 FCL1533 FCL1534 FCL1534

-04 -06 -08 -10 -12

Packaged Part Number

Hose Bulk Size Part Number

SOCKETLESS Black Anodized Aluminum S.A.E. 37° (JIC/AN)

b

90° El ow Fitting

IN IHNOTSREO & D UFCI T T IO NG S

45° El ow Fitting

FCM1562 FCM1563 FCM1564 FCM1565

Please see Pages 44-48 for assembly instructions. 1These fittings mate with both 37° and 45° male flares.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

12 11 11

Even Our A/C Lines Look Cool.

Custom look and superior performance

Specifically designed for your A/C component applications.

This new and innovative product offers discriminating motorsport enthusiasts a superior hose and fitting combination specifically designed for A/C component applications. This attractive hose has a stainless steel outerbraid with a nylon inner tube for supe-

­

rior refrigerant performance.

Custom designed nickel plated steel reusable fittings, with available charge ports, are an eye appealing compliment to complete these field serviceable hose assemblies.

­

Applications: Air conditioning

.08 .10 .14

a

f

I

FCF0603 FCF0606 FCF0609 FCF0803 FCF0806 FCF0809 FCF1003 FCF1006 FCF1009

Package Length Part Number 3 FEET 6 FEET 9 FEET

FBF0600 FBF0800 FBF1000

4.00 5.25 6.50

500 500 500

Bulk Part Number

.33 .43 .51

Weight Per Foot POUNDS

.44 .54 .63

ring n orm tion

de

s O

ca

f

r

Minimum Bend Radius INCHES

tion

Maximum Hose Hose Operating I.D. O.D. Pressure INCHES INCHES PSI

-06 -08 -10

Hose Dash Size

i i

ec

Sp

se

Ho

h

OSE AND FITTINGS

A/C HOSE AND FITTINGS

emperature ange: -40°F to +250°F (-40°C to +121°C).

R

T

Look As Cool As You Feel.

Your street rod is “cool” because of your demanding attention to detail. And although perfection is your goal, up until now you have been forced to accept industriallooking A/C hose & fittings, or worse yet, stainless steel braided versions that didn’t work. ­

DIU H OISNET R &O F TC T ITNI O GN S

A/C

­

­

Eaton’s Aeroquip Performance Products has responded to your endless pursuit of detail and perfection with the development of an A/C hose & fitting product designed specifically for street rod A/C components, and your impeccable standards.

Features:

• Superior appearance with stainless steel covered hose available in sizes -6, -8, and -10 • Nylon tube for outstanding refrigerant performance

• Nickel-plated steel reusable fittings, with reusable charge ports, offer field serviceability • Female O-ring pilot terminal ends for precise connections with existing A/C components • O-ring seal between the hose and fitting nipple increases fitting and hose assembly integrity

• Trusted Aeroquip Performance Product quality

TechTip

• Extensively field and lab tested with R-134a refrigerant • Reusable fittings allow you to make custom hose assemblies for your specific applications

Lubricant Selection

­

Always be sure to use the correct system lubricant for your A/C system. Most R-12 systems use mineral oil, while most R-134a systems use a synthetic lubricant called Polyalkylene Glycol (PAG).

A/C hose is qualified with the A/C fittings on the following page.

Please see Pages 44-48 for assembly instructions.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

12 13 12

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

H Fitting

45° Fitting

T

IG

TR

A

Packaged Part Number

Packaged Part Number

Packaged Part Number

Hose Size

Packaged Part Number

-06 -08 -10

FCE1712 FCE1713 FCE1714

FCE1912 FCE1913 FCE1914

-06 -08 -10

FCE1722 FCE1723 FCE1724

FCE1893 FCE1894

FCE1793 FCE1794

FCM3416 FCM3417 FCM3418

Part Number

-06 -08 -10

D

R

N

-rings (H B )

Size

E

O

e

ace

m nt

6 6 6

FCM2430 FCM2431 FCM2432

-06 -08 -10

Quantity

e

e

Part Number

Size

Packaged Part Number

r pl

*

v

ee

s

ass

b

e

ace

e

l

Packaged Part Number

-08 -10

m nt r

Reusable NickelPlated Steel Female O-ring Pilot with Charge Port

Hose Size

FCE1832 FCE1833 FCE1834

FCE1732 FCE1733 FCE1734

-06 -08 -10

Packaged Part Number

Reusable NickelPlated Steel Female O-ring Pilot

Packaged Part Number

Hose Size

Reusable NickelPlated Steel Female O-ring Pilot with Charge Port

135° Fitting

Reusable NickelPlated Steel Female O-ring Pilot

90° Fitting

r pl

FCE1812 (High Side) FCE1813 (High Side) FCE1814 (Low Side)

Reusable NickelPlated Steel Female O-ring Pilot

Hose Size

Reusable NickelPlated Steel Hose to Hose w/ Charge Port

Reusable NickelPlated Steel Female O-ring Pilot w/ Charge Port

Reusable NickelPlated Steel Female O-ring Pilot

IN IHNOTSREO & D UFCI T T IO NG S

S

OSE AND FITTINGS (CONT.)

h

A/C

Quantity 6 6 6

*The brass sleeves have a HNBR O-ring inside.

Please see Pages 44-48 for assembly instructions.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

14 13

Our Strongest, Most Compatible Hose.

For the most extreme applications

­

Superior fluid compatibility, abrasion and corrosion resistance for reliable service.

Made with an extruded Teflon* inner tube that’s compatible with a wide range of fluids, including hydraulic brake fluids. The hose has a bright stainless steel wire-braid cover

a

f

I

FCC0315 FCC0415 FCC0615 FCC0815

FCC0310 FCC0410 FCC0610 FCC0810

FCC0306 FCC0406 FCC0606 FCC0806

FBC0300 FBC0400 FBC0600 FBC0800

FCC0303 FCC0403 FCC0603 FCC0803

15 FEET

28 28 28 28

1.50 2.00 4.00 5.25

Package Length Part Number 3 FEET 6 FEET 10 FEET

3,000 3,000 2,500 2,000

Bulk Vacuum Part Service Number INCHES/HG

.25 .30 .43 .54

.14 .19 .32 .42

Minimum Bend Radius INCHES

Maximum Operating Pressure PSI

Hose O.D. INCHES

Applications: Offroad brake, transmission, clutch, gauge, N2O, power steering, hydraulic.

ring n orm tion

de

r

s O

ca

f

tion

Hose I.D. INCHES

-03 -04 -06 -08

Hose Dash Size

i i

ec

Sp

se

Ho

that resists abrasion and corrosion, providing optimum dependability.

h

acing

OSE AND FITTINGS

RACING HOSE, TEFLON*

20 FEET FCC0320 FCC0420 FCC0620 FCC0820

Construction: Extruded Teflon* inner tube with stainless steel wire-braid cover. emperature ange: -100°F to +450°F (-73°C to +232°C).

R

T

DIU H OISNET R &O F TC T ITNI O GN S

R

TechTip

Features: • Unmatched strength and ultimate flexibility • Functions smoothly at extreme temperatures • Withstands constant flexing and vibration

Hose Assembly

After cutting Teflon* and A/C hose, be sure to clean all burrs or debris from the end of the hose. This helps to ensure a secure and leak free seal between the tube and sleeve.

• Resists fatigue and failure under high pressure • Carries fluids of all kinds without contamination

Teflon* hose is a registered trademark of Dupont and under license from Eaton..

Please see Pages 44-48 for assembly instructions.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

14 15

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

h

acing

h

—

b

e

Hose Size

Packaged Part Number

-03

FCM3091

-03

FCM3092

Packaged Part Number

Hose Size

—

—

Reusable Steel 10mm Banjo

Reusable Steel 10mm Banjo

—

17° l ow

h

a

tr ig t

-05 -06 -08

FCM1137 FCM1138 FCM1139

FCM1135

-08

FCM1134

FBM1125

FBM1124

FCM1102

FCM1104

FCM1130

—

—

—

—

—

—

—

FCM1103

—

—

Bulk Part Number

—

-06

Packaged Packaged Part Number Fitting Size Part Number

FCM1100

Reusable Stainless Steel Steel Swivel Crimp S.A.E. 37° (JIC/AN) S.A.E. 37° (JIC/AN)

— 1⁄8 1⁄4

— FCM3088 FCM3089

-03 -04

Packaged Part Number

Packaged Pipe Packaged Part Number Thread Size Part Number FCM1101

Reusable Steel Inverted Flare S.A.E. Male

Reusable Reusable Steel Swivel Steel Swivel S.A.E. 37° (JIC/AN)1 S.A.E. 45°

Reusable Steel Male Pipe1

a

tr ig t Fitting

Hose Size

s

OSE AND FITTINGS (CONT.)

b

Packaged Part Number

Packaged Part Number

Packaged Part Number

Fitting Size

-03 -04

FCM1110 FCM1111

— —

-06

FCM1112

FCM1114

FCM11131

FCM11131

— — FCM1155 FCM1141 FCM1142

— — -05 -06 -08

Packaged Part Number

Bulk Part Number

Steel Crimp S.A.E. 37° (JIC/AN)

FBM1126 FBM1127

—

—

—

—

FCM1140 FCM1146

-08

Hose Size

Forged Adjustable Reusable Stainless Steel Swivel S.A.E. 37° (JIC/AN)

Reusable Steel Inverted Flare S.A.E. Male

Reusable Steel S.A.E. 45°

Reusable Steel S.A.E. 37° (JIC/AN)

e

45° l ow

IN IHNOTSREO & D UFCI T T IO NG S

s

R

b

Hose Size

Packaged Part Number

Packaged Part Number

Packaged Part Number

Fitting Size

-03 -04

FCM1120 FCM1121

— —

-06

FCM1122

FCM1136

FCM11231

FCM11231

— — FCM1143 FCM1144 FCM1145

— — -05 -06 -08

FBM1128 FBM1129

—

—

—

—

FCM1150 FCM1151

e

k g ) Hose Fitting Dash Size

FCM3821 FCM3822

-03 -04

Stainless Steel Packaged Part Number

Bulk Part Number

-03 -04 -06 -08

Packaged Part Number

FCM3720 FCM3721 FCM3823 FCM3824

Hose Fitting Dash Size

ac

(5 p r p

Brass Packaged Part Number

a

es

ee

v

e

m nt Sl e

pl

ace

Re

Replacement Sleeves for Teflon* Fittings

Steel Crimp S.A.E. 37° (JIC/AN)

-08

Forged Adjustable Reusable Stainless Steel Swivel S.A.E. 37° (JIC/AN)

Reusable Steel Inverted Flare S.A.E. Male

Reusable Steel S.A.E. 45°

Reusable Steel S.A.E. 37° (JIC/AN)

e

90° l ow

Please see Pages 44-48 for assembly instructions. *Teflon is a registered trademark of Dupont and under license by Eaton. fitting mates with both 37° (AN) and 45° male flares.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

1This

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

16 15 15

Off-Road Teflon* Brakelines Completely assembled, ready to install.

s

ca

f

tion

AQP Part Number Maximum Operating Pressure Teflon* Hose Straight–Straight AN Swivel Ends FBPA0040-10 -04 Teflon Hose, 10 inch, Str-Str 3,000 psi FBPA0040-12 -04 Teflon Hose, 12 inch, Str-Str 3,000 psi FBPA0040-14 -04 Teflon Hose, 14 inch, Str-Str 3,000 psi FBPA0040-15 -04 Teflon Hose, 15 inch, Str-Str 3,000 psi FBPA0040-16 -04 Teflon Hose, 16 inch, Str-Str 3,000 psi FBPA0040-18 -04 Teflon Hose, 18 inch, Str-Str 3,000 psi FBPA0040-20 -04 Teflon Hose, 20 inch, Str-Str 3,000 psi FBPA0040-21 -04 Teflon Hose, 21 inch, Str-Str 3,000 psi FBPA0040-22 -04 Teflon Hose, 22 inch, Str-Str 3,000 psi FBPA0040-24 -04 Teflon Hose, 24 inch, Str-Str 3,000 psi FBPA0040-26 -04 Teflon Hose, 26 inch, Str-Str 3,000 psi FBPA0040-28 -04 Teflon Hose, 28 inch, Str-Str 3,000 psi FBPA0040-30 -04 Teflon Hose, 30 inch, Str-Str 3,000 psi FBPA0040-32 -04 Teflon Hose, 32 inch, Str-Str 3,000 psi FBPA0040-36 -04 Teflon Hose, 36 inch, Str-Str 3,000 psi FBPA0040-42 -04 Teflon Hose, 42 inch, Str-Str 3,000 psi FBPA0040-48 -04 Teflon Hose, 48 inch, Str-Str 3,000 psi FBPA0040-50 -04 Teflon Hose, 50 inch, Str-Str 3,000 psi AN Swivel Ends FBPA0049-10 -04 Teflon Hose, 10 inch, Str-90 3,000 psi FBPA0049-12 -04 Teflon Hose, 12 inch, Str-90 3,000 psi FBPA0049-14 -04 Teflon Hose, 14 inch, Str-90 3,000 psi FBPA0049-15 -04 Teflon Hose, 15 inch, Str-90 3,000 psi FBPA0049-16 -04 Teflon Hose, 16 inch, Str-90 3,000 psi FBPA0049-18 -04 Teflon Hose, 18 inch, Str-90 3,000 psi FBPA0049-20 -04 Teflon Hose, 20 inch, Str-90 3,000 psi FBPA0049-21 -04 Teflon Hose, 21 inch, Str-90 3,000 psi FBPA0049-22 -04 Teflon Hose, 22 inch, Str-90 3,000 psi FBPA0049-24 -04 Teflon Hose, 24 inch, Str-90 3,000 psi FBPA0049-26 -04 Teflon Hose, 26 inch, Str-90 3,000 psi FBPA0049-28 -04 Teflon Hose, 28 inch, Str-90 3,000 psi FBPA0049-30 -04 Teflon Hose, 30 inch, Str-90 3,000 psi FBPA0049-32 -04 Teflon Hose, 32 inch, Str-90 3,000 psi FBPA0049-36 -04 Teflon Hose, 36 inch, Str-90 3,000 psi FBPA0049-42 -04 Teflon Hose, 42 inch, Str-90 3,000 psi FBPA0049-48 -04 Teflon Hose, 48 inch, Str-90 3,000 psi FBPA0049-50 -04 Teflon Hose, 50 inch, Str-90 3,000 psi

i i

ec

Sp

s

tion

ca

f

i i

ec

Sp

AQP Part Number Maximum Operating Pressure Teflon* Hose Straight–Straight AN Swivel Ends FBPA0030-10 -03 Teflon Hose, 10 inch, Str-Str 3,000 psi FBPA0030-12 -03 Teflon Hose, 12 inch, Str-Str 3,000 psi FBPA0030-14 -03 Teflon Hose, 14 inch, Str-Str 3,000 psi FBPA0030-15 -03 Teflon Hose, 15 inch, Str-Str 3,000 psi FBPA0030-16 -03 Teflon Hose, 16 inch, Str-Str 3,000 psi FBPA0030-18 -03 Teflon Hose, 18 inch, Str-Str 3,000 psi FBPA0030-20 -03 Teflon Hose, 20 inch, Str-Str 3,000 psi FBPA0030-21 -03 Teflon Hose, 21 inch, Str-Str 3,000 psi FBPA0030-22 -03 Teflon Hose, 22 inch, Str-Str” 3,000 psi FBPA0030-24 -03 Teflon Hose, 24 inch, Str-Str 3,000 psi FBPA0030-26 -03 Teflon Hose, 26 inch, Str-Str 3,000 psi FBPA0030-28 -03 Teflon Hose, 28 inch, Str-Str 3,000 psi FBPA0030-30 -03 Teflon Hose, 30 inch, Str-Str 3,000 psi FBPA0030-32 -03 Teflon Hose, 32 inch, Str-Str 3,000 psi FBPA0030-36 -03 Teflon Hose, 36 inch, Str-Str 3,000 psi FBPA0030-42 -03 Teflon Hose, 42 inch, Str-Str 3,000 psi FBPA0030-48 -03 Teflon Hose, 48 inch, Str-Str 3,000 psi FBPA0030-50 -03 Teflon Hose, 50 inch, Str-Str 3,000 psi AN Swivel Ends FBPA0039-10 -03 Teflon Hose, 10 inch, Str-90” 3,000 psi FBPA0039-12 -03 Teflon Hose, 12 inch, Str-90 3,000 psi FBPA0039-14 -03 Teflon Hose, 14 inch, Str-90 3,000 psi FBPA0039-15 -03 Teflon Hose, 15 inch, Str-90 3,000 psi FBPA0039-16 -03 Teflon Hose, 16 inch, Str-90 3,000 psi FBPA0039-18 -03 Teflon Hose, 18 inch, Str-90 3,000 psi FBPA0039-20 -03 Teflon Hose, 20 inch, Str-90 3,000 psi FBPA0039-21 -03 Teflon Hose, 21 inch, Str-90 3,000 psi FBPA0039-22 -03 Teflon Hose, 22 inch, Str-90 3,000 psi FBPA0039-24 -03 Teflon Hose, 24 inch, Str-90 3,000 psi FBPA0039-26 -03 Teflon Hose, 26 inch, Str-90 3,000 psi FBPA0039-28 -03 Teflon Hose, 28 inch, Str-90 3,000 psi FBPA0039-30 -03 Teflon Hose, 30 inch, Str-90 3,000 psi FBPA0039-32 -03 Teflon Hose, 32 inch, Str-90 3,000 psi FBPA0039-36 -03 Teflon Hose, 36 inch, Str-90 3,000 psi FBPA0039-42 -03 Teflon Hose, 42 inch, Str-90 3,000 psi FBPA0039-48 -03 Teflon Hose, 48 inch, Str-90 3,000 psi FBPA0039-50 -03 Teflon Hose, 50 inch, Str-90 3,000 psi Applications: Off-road brake, clutch, gauge, N2O

DIU H OISNET R &O F TC T ITNI O GN S

PRE-MADE OFF-ROAD BRAKELINES AND POWER TRIM ASSEMBLIES

Marine Power Trim Hose Lines ­

Eaton’s Aeroquip Performance Products Teflon*/stainless steel marine power trim hose assemblies for I/O power trim systems are completely factory-assembled in standard 141⁄2″ lengths in both 90° and 45° elbow configurations.

141⁄2 141⁄2

INCHES -03 -03

Overall Length

INCHES/HG 28 FCP0108 28 FCP0107

Fitting Dash Size

INCHES 2.00 2.00

f

a

Packaged Part Number

Vacuum Service

I

de

ca

f

INCHES PSI .30 2,500 .30 2,500

ring n orm tion

Max. Min. Operating Bend Pressure Radius

INCHES .19 .19

r

Hose O.D.

-04 -04

tion

Hose I.D.

Hose Dash Size

i i

ec

Sp

se

Ho

s O

Application: Inboard/outboard power trim systems

Fitting End Configuration Inverted Flare Straight to Inverted Flare 90° Elbow Inverted Flare Straight to Inverted Flare 45° Elbow

Construction: Extruded Teflon* inner tube with stainless steel single wire-braid cover.

Temperature Range: -100°F to +450°F (-73°C to +232°C).

*Teflon is a registered trademark of Dupont and under license by Eaton.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

16 17

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

AQP® HIGH PRESSURE HOSE AND FITTINGS

Abrasion resistant fabric cover for longer life.

AQP High Pressure Hose is ideal for power steering, hydraulics, air, fuel and lubricating oil applications.

It has a blue abrasion resistant fabric cover and an AQP synthetic rubber

a

20 FEET FCG0620 FCG0820 FCG1020 FCG1220

15 FEET FCG0615 FCG0815 FCG1015 FCG1215

10 FEET FCG0610 FCG0810 FCG1010 FCG1210

FBG0600 FBG0800 FBG1000 FBG1200

Package Length Part Number 6 FEET FCG0606 FCG0806 FCG1006 FCG1206

INCHES/HG 28 28 28 28

PSI 2,250 2,000 1,750 1,500

Bulk Part Number

INCHES .67 .77 .92 1.08

f

I

de

INCHES .31 .41 .50 .62

Vacuum Service

Maximum Minimum Operating Bend Pressure Radius

Hose O.D.

INCHES 4.00 4.62 5.50 6.50

inner tube. It uses standard steel and brass reusable fittings.

Applications: Power steering lines, hydraulics, air, gasoline, fuel and lubricating oils, over-thewall air tools and DOTapproved air brake.

ring n orm tion

Hose I.D.

-06 -08 -10 -12

r

s O

ca

f

tion

Hose Dash Size

i i

ec

Sp

se

Ho

emperature ange: Suitable for many applications between -55°F to +300°F (-49°C to +150°C), except air +250F (+121°C).

R

b

Thread Size

Bulk Part Number

Thread Size

FBM1386 9⁄16-18 FBM1384 3⁄4-16 FBM1338 7⁄8-14 FBM1339 11⁄16-12

FBM1382 FBM1383 — —

5⁄8-18 3⁄4-18 — —

Bulk Part Number

s

pt r e

da

e

ur A

b

h

r

Hig

P

Reusable Steel Male Inverted Flare S.A.E.

-06 -08 -10 -12

5⁄8-18 3⁄4-18 — —

90° El ow Fitting

Reusable Steel S.A.E. 37° (JIC/AN)

Hose Size

Thread Size

FBM1363 FBM1365 — —

9⁄16-18 3⁄4-16 7⁄8-14 11⁄16-12

Bulk Part Number

-06 -08 -10 -12

Thread Size

Bulk Part Number FBM1302 FBM1305 FBM1307 FBM1310

Hose Size

Reusable Steel Male Inverted Flare S.A.E.

ess

h

a

45° El ow Fitting

Reusable Steel Swivel S.A.E. 37° (JIC/AN)

T

Construction: AQP elastomer inner tube, polyester inner braid, single wire-braid reinforcement and blue polyester braid cover.

Str ig t Fitting

IN IHNOTSREO & D UFCI T T IO NG S

AQP® High Pressure Hose and Fittings (Power Steering)

B

A

“A” Dash Size

Steel Packaged Part Number

M

Reusable Steel Male Inverted Flare S.A.E.

Reusable Steel S.A.E. 37° (JIC/AN)

etric Conversion “B” Dash Size

-06 -06 -06

“A” Dash Size

FCM2963 FCM2964 FCM2965

B

A

Steel Packaged Part Number

5⁄8-18 3⁄4-18 — —

nverted Flare

Thread Size

FBM1392 FBM1394 — —

9⁄16-18 3⁄4-16 7⁄8-14 11⁄16-12

Bulk Part Number

Thread Size

-06 -08 -10 -12

Bulk Part Number FBM1389 FBM1387 FBM1374 FBM1376

Hose Size

I

FCM2608 -06 M16 x 1.5 FCM2609 -06 M18 x 1.5 Note: Used for Saginaw Power Steering Adapter (metric); also G.M. fuel injection conversion adapter for metric O-ring style porting

“B” Dash Size 1⁄2-20 5⁄8-18 11⁄16-18

Please see Pages 44-48 for assembly instructions.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

18 17

N

Steel Packaged “A” “B” Part Dash Dash Number Size Size

FCM5000 FCM5001 FCM5002 — — — — — FCM5003 FCM5004 FCM5005 FCM5013 — FCM5006 FCM5007 FCM5008 — FCM5185 FCM5009 — FCM5010 FCM5011 FCM5014 — — FCM5015 FCM5012 — — — — — — — — — —

FCE2000 FCE2001 FCE2002 — — — — — FCE2003 FCE2004 FCE2005 FCE2013 — FCE2006 FCE2007 FCE2008 — FCE2185 FCE2009 — FCE2010 FCE2011 FCE2014 — — FCE2015 FCE2012 — — — — — — — — — —

FCM2511 FCM2512 FCM2515 FCM2519 FCM2524 FCM2513 FCM2516 FCM2520 FCM2514 FCM2517 FCM2521 FCM2525 FCM2529 FCM2518 FCM2522 FCM2526 FCM2530 FCM2523 FCM2527 FCM2531 FCM2528 FCM2532 FCM2534 FCM2539 FCM2544 FCM2533 FCM2535 FCM2540 FCM2545 FCM2536 FCM2541 FCM2546 FCM2537 FCM2542 FCM2547 FCM2538 FCM2543

Aluminum Nickel-Plated Packaged Part Number

Aluminum Black Anodized Packaged Part Number

816)

A

B

A

B

A

B

NPT Port Size

“B” Pipe Size

INCHES

INCHES

1⁄4 3/8 1/4 3⁄8

1/8 1/8 1/8 1/8

-6 -6 -8 -8

FCM2276 FCM2277 FCM2278 FCM2279

1⁄8 1⁄8 1⁄4 3⁄8 1⁄2 1⁄8 1⁄4 3⁄8 1⁄8 1⁄4 3⁄8 1⁄2 3⁄4 1⁄4 3⁄8 1⁄2 3⁄4 3⁄8 1⁄2 3⁄4 1⁄2 3⁄4 1 1 1⁄4 1 1⁄2 3⁄4 1 1 1⁄4 1 1⁄2 1 1 1⁄4 1 1⁄2 1 1 1⁄4 1 1⁄2 1 1 1⁄4

e

ada

e

a

e

ess

B

-03 -04 -04 -04 -04 -05 -05 -05 -06 -06 -06 -06 -06 -08 -08 -08 -08 -10 -10 -10 -12 -12 -12 -12 -12 -16 -16 -16 -16 -20 -20 -20 -24 -24 -24 -32 -32

pt r

Aluminum Blue Anodized “A” Packaged Dash Part Number Size

e

ur g ug

An to pip pr

A

INCHES

FCM2000 FCM2001 FCM2002 FCM2371 — — — — FCM2003 FCM2004 FCM2005 FCM2013 — FCM2006 FCM2007 FCM2008 FCM2372 FCM2185 FCM2009 — FCM2010 FCM2011 FCM2014 — — FCM2015 FCM2012 — — — FCM2374 — — — — — —

One of the most common ways the seat or cone on aluminum fittings and adapters can be easily damaged is by over-tightening (see Torque specifications information on Page 51). If a fitting has been over-tightened, it may be damaged and prone to leaks.

Dirt and debris on the sealing surface are also common sources of leaks. Always use Eaton’s Aeroquip Performance Products dust caps (Page 36) when disconnecting a hose or fitting to help keep contaminants out of hose and adapters.

Too Tight And Leaking

Aluminum Blue Anodized Packaged Part Number

e

to ip (A P

N

e

l A

AN to Pipe Fittings Ma

TechTip

I N T RA O DA UP CT TE IO RN S

ADAPTERS

AN numbers are for configuration reference only.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

18 19 18

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ADAPTERS (CONT.)

N

e

FCM2610 FCM2611 FCM2614 FCM2618 FCM2624 FCM2612 FCM2615 FCM2619 FCM2613 FCM2616 FCM2620 FCM2625 FCM2617 FCM2621 FCM2626 FCM2629 FCM2622 FCM2627 FCM2630 FCM2623 FCM2628 FCM2631 FCM2633 FCM2632 FCM2634 FCM2636 FCM2635 FCM2637 FCM2639 FCM2638

FCE2030 FCE2031 FCE2032 — — — — — FCE2033 FCE2034 FCE2035 — FCE2036 FCE2037 FCE2038 — FCE2016 FCE2039 — — FCE2017 FCE2040 — — — — — — — —

FCM5030 FCM5031 FCM5032 — — — — — FCM5033 FCM5034 FCM5035 — FCM5036 FCM5037 FCM5038 — FCM5016 FCM5039 — — FCM5017 FCM5040 — — — — — — — —

Steel Packaged “A” “B” Part Dash Dash Number Size Size

P

N

Aluminum Nickel-Plated Packaged Part Number

-03 -04 -04 -04 -04 -05 -05 -05 -06 -06 -06 -06 -08 -08 -08 -08 -10 -10 -10 -12 -12 -12 -12 -16 -16 -16 -20 -20 -20 -24

A

B

1⁄8 1⁄4 1⁄8 1⁄8 1⁄4 1⁄4 1⁄4 1⁄4 3⁄8 3⁄8 1⁄2 1⁄2 1⁄2 1⁄2 3⁄4 3⁄4 3⁄4 1 1 1⁄4

-03 -03 -04 -05 -04 -05 -06 -08 -06 -08 -06 -08 -10 -12 -08 -10 -12 -16 -20

INCHES

FCM2719 FCM2720 FCM2721 FCM2722 FCM2723 FCM2724 FCM2725 FCM2726 FCM2727 FCM2728 FCM2729 FCM2730 FCM2731 FCM2732 FCM2733 FCM2734 FCM2735 FCM2736 FCM2737

“B” Dash Size

“A” Dash Size

Steel Packaged Part Number

N

l A e

Ma

ip to e

e P

a

e

F m l

822)

Aluminum Black Anodized Packaged Part Number

INCHES

FCM2030 FCM2031 FCM2032 — — — — — FCM2033 FCM2034 FCM2035 FCM2290 FCM2036 FCM2037 FCM2038 FCM2291 FCM2016 FCM2039 FCM2292 — FCM2017 FCM2040 FCM2293 FCM2018 FCM2041 — — FCM2294 — —

1⁄8 1⁄8 1⁄4 3⁄8 1⁄8 1⁄4 1⁄4 3⁄8 1⁄2 1⁄4 3⁄8 1⁄2 3⁄4 3⁄8 1⁄2 3⁄4 1⁄2 3⁄4 1 3⁄4 1 1 1 1⁄4

-03 -04 -04 -04 -05 -05 -06 -06 -06 -08 -08 -08 -08 -10 -10 -10 -12 -12 -12 -16 -16 -20 -20

FCM2581 FCM2582 FCM2584 FCM2588 FCM2583 FCM2585 FCM2586 FCM2589 FCM2592 FCM2587 FCM2590 FCM2593 FCM2596 FCM2591 FCM2594 FCM2597 FCM2595 FCM2598 FCM2600 FCM2599 FCM2601 FCM2602 FCM2603

FCE2020 FCE2021 — — — — FCE2022 — — — FCE2023 — — — FCE2024 — — FCE2025 — — — — —

FCM5020 FCM5021 — — — — FCM5022 — — — FCM5023 — — — FCM5024 — — FCM5025 — — — — —

B

B

to ip (A

Aluminum Blue Anodized Packaged Part Number

Steel Packaged “A” “B” Part Dash Dash Number Size Size INCHES

FCM2020 FCM2021 FCM2440 FCM2441 — — FCM2022 FCM2442 FCM2443 FCM2444 FCM2023 FCM2445 FCM2446 FCM2447 FCM2024 FCM2448 FCM2449 FCM2025 FCM2450 — FCM2026 — FCM2451

B

90° A

Aluminum Nickel-Plated Packaged Part Number

N

e

P

B

823)

Aluminum Black Anodized Packaged Part Number

to ip (A

N

e

Ma

l A

Aluminum Blue Anodized Packaged Part Number

B

B

45°

A

A

A

A

1⁄8 1⁄8 1⁄4 3⁄8 1⁄2 1⁄8 1⁄4 3⁄8 1⁄8 1⁄4 3⁄8 1⁄2 1⁄4 3⁄8 1⁄2 3⁄4 3⁄8 1⁄2 3⁄4 3⁄8 1⁄2 3⁄4 1 3⁄4 1 1 1⁄4 1 1 1⁄4 1 1⁄2 1 1⁄4

ST I O N IANDTARPOTDEURC

A A

AN numbers are for configuration reference only.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

20 19

FCM2050 FCM2051 — FCM2052 FCM2053 FCM2054 FCM2055 FCM2056 —

FCM5050 FCM5051 — FCM5052 FCM5053 FCM5054 FCM5055 FCM5056 —

FCE2050 FCE2051 — FCE2052 FCE2053 FCE2054 FCE2055 FCE2056 —

-03 -04 -04 -05 -04 -06 -04 -06 -08 -04 -06 -08 -10 -10 -12

FCM2408 FCM2409 FCM2410 FCM2411 FCM2413 FCM2414 FCM2416

-06 -08 -08 -10 -12 -12 -16

-04 -04 -06 -06 -06 -08 -06

N

“A” Dash Size

“B” Dash Size

-10 -12

-08 -10

I

e

Fl r (J C/A )

Steel Packaged Part Number

TechTip AN (Army-Navy)

The AN (Army-Navy) standard was established many years ago by the U.S. military to set a common measurement for hose and fittings. It designates the outside diameter (O.D.) of the ridged metal tube that is compatible with each size of fitting. Still today, this AN dash standard is the benchmark measurement for military, industrial and the performance hose applications. These dash sizes are expressed as the numerator of the fraction, with the denominator always being 16. For example, a -04 port is 4/16 or 1/4-inch.

“B” Dash Size

“A” Dash Size

a

N

I

e

a

N

e

Fl r (J C/A )

Steel Packaged Part Number

B FCM2421

FCM2749 FCM2752 FCM2754 FCM2755 FCM2757 FCM2758 — — FCM2760 — — — FCM2762 — FCM2764

e

-04 -05 -06 -06 -08 -08 -10 -10 -10 -12 -12 -12 -12 -16 -16

FCE2048 — FCE2156 — FCE2049 FCE2160 — FCE2162 FCE2163 — — FCE2166 FCE2167 — FCE2170

FCM2422

“B” Dash Size

FCM5048 — FCM5156 — FCM5049 FCM5160 — FCM5162 FCM5163 — — FCM5166 FCM5167 — FCM5170

A

“A” Dash Size

FCM2048 — FCM2156 — FCM2049 FCM2160 FCM2188 FCM2162 FCM2163 FCM2189 FCM2165 FCM2166 FCM2167 FCM2169 FCM2170

Fl r /A a

N

ce

rA

-03 -04 -05 -06 -08 -10 -12 -16 -20

Steel Packaged Part Number

N

Red

u

-03 -04 -05 -06 -08 -10 -12 -16 -20

Aluminum Nickel-Plated Packaged Part Number

e

a

N

ce

B

FCM2750 FCM2751 FCM2753 FCM2756 FCM2759 FCM2761 FCM2763 FCM2765 FCM2766

Aluminum Black Anodized Packaged Part Number

Fl r Swiv l/A

A

“B” Dash Size

Aluminum Blue Anodized Packaged Part Number

rA

Red

u

“A” Dash Size

919)

B

A

Steel Packaged Part Number

Aluminum Nickel-Plated Packaged Part Number

r (A

N

ce

Red

u

Aluminum Black Anodized Packaged Part Number

nion

U

B

A

Aluminum Blue Anodized Packaged Part Number

U

e

815)

a

nion (A

N

AN to AN Fittings Fl r

I N T RA O DA UP CT TE IO RN S

ADAPTERS (CONT.)

AN numbers are for configuration reference only.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

20 21 20

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ADAPTERS (CONT.)

FCM5186 FCM5119 FCM5120 FCM5190 —

FCE2186 — FCE2120 FCE2190 —

-03 -04 -06 -08 -12

INCHES

INCHES

-6 -8 -10

1/8 1/8 1/8

-03 -04 -06 -08 -12

e

NPT Port Size

“B” Dash Size

-6 -8 -10

FCM2272 FCM2273 FCM2274

“B” Dash Size

pt r

da

e

a

“A” Dash Size

Blue Anodized Packaged Part Number

A

e

ur g ug A

ess

P

n r

a

to

N

e

Ma

l A

90°

B

“A” Dash Size

FCM2186 FCM2119 FCM2120 FCM2190 FCM2191

A

Aluminum Nickel-Plated Packaged Part Number

Aluminum Black Anodized Packaged Part Number

Aluminum Blue Anodized Packaged Part Number

821)

N

U

b

nion (A

B

e

a

e

-6 -8 -10 -12

-6 -8 -10 -12

Aluminum Packaged Part Number

“A” Dash Size

“B” Dash Size

FCM3155 FCM3156 FCM3157 FCM3158

-6 -8 -10 -12

-6 -8 -10 -12

e

a

f

-06 -08 -10 -12 -16

A

“B” Dash Size

wiv l l r e

s

e

a

e

a

e

Ma

n to F m l

-06 -08 -10 -12 -16

l

FCM2971 FCM2972 FCM2973 FCM2974 FCM2975

FCM3148 FCM3149 FCM3150 FCM3151

“B” Dash Size

B

wiv l e

“A” Dash Size

FCM2978 FCM2979 FCM2980 FCM2981 FCM2982

-06 -08 -10 -12 -16

Aluminum Blue/Red Anodized Packaged Part Number

s

e

l r a

f

e

a

fe

m l

“A” Dash Size

“A” Dash Size

Aluminum Blue/Red Anodized Packaged Part Number

B

90°

wiv l

90°

e

a

e

a

A

s

e

a

f

e

a

fe

l r

m l

45°

-04 -06 -08 -10 -12 -16

e

B

A

Aluminum Packaged Part Number

-04 -06 -08 -10 -12 -16

“B” Dash Size

FCM2914 FCM2915 FCM2916 FCM2917 FCM2918 FCM2919

n to F m l Swiv l Fl r

“A” Dash Size

l

e

e

a

e

a

e

Aluminum Blue Anodized Packaged Part Number

e

45°

F m l Fl r Swiv l

Ma

AN Swivel Adapters

ST I O N IANDTARPOTDEURC

90° El ow

“B” Dash Size -06 -08 -10 -12 -16

AN numbers are for configuration reference only.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

22 21

Pipe to Pipe 911) Aluminum Nickel-Plated Packaged Part Number

“A” Pipe Size

“B” Pipe Sizes

INCHES

INCHES

FCM2132 FCM2133 FCM2134 FCM2135

FCM5132 FCM5133 FCM5134 FCM5135

FCE2132 FCE2133 FCE2134 FCE2135

1⁄8 1⁄4 3⁄8 1⁄2

1⁄8 1⁄4 3⁄8 1⁄2

Aluminum Blue Anodized Packaged Part Number

Aluminum Black Anodized Packaged Part Number

Aluminum Nickel-Plated Packaged Part Number

“A” Pipe Size

“B” Pipe Size

INCHES

INCHES

FCM2129 FCM2130 FCM2131

FCM5129 FCM5130 FCM5131

FCE2129 FCE2130 —

1⁄8 1⁄4 3⁄8

1⁄8 1⁄4 3⁄8

Aluminum Blue Anodized Packaged Part Number

Aluminum Black Anodized Packaged Part Number

Aluminum Nickel-Plated Packaged Part Number

“A” Pipe Size

“B” Pipe Size

INCHES

INCHES

FCM2136 FCM2137 FCM2138 FCM2139 FCM2140 FCM2141 FCM2144 FCM2143 FCM2142 FCM2146 FCM2145

FCM5136 FCM5137 FCM5138 FCM5139 FCM5140 FCM5141 — — FCM5142 — —

FCE2136 FCE2137 FCE2138 FCE2139 FCE2140 FCE2141 — — FCE2142 — —

1⁄4 3⁄8 3⁄8 1⁄2 1⁄2 1⁄2 3⁄4 3⁄4 3⁄4 1 1

1⁄8 1⁄4 1⁄8 3⁄8 1⁄4 1⁄8 1⁄4 3⁄8 1⁄2 1⁄2 3⁄4

“A” Pipe Size

“B” Pipe Size

INCHES

INCHES

FCM2147 FCM2148 FCM2149

FCM5147 FCM5148 FCM5149

FCE2147 — —

1⁄8 1⁄4 3⁄8

1⁄8 1⁄4 3⁄8

B

Aluminum Nickel-Plated Packaged Part Number

Aluminum Black Anodized Packaged Part Number

Aluminum Blue Anodized Packaged Part Number

914)

A

ip El ow (A

N

l

b

Ma

T

e

a

e

b

o

e

90° El ow, F m l

P

B

A

e

912)

N

sh

ing (A

e

ip Bu

B

P

N

910)

A

e

P

ip Coupling (A

B

A

Aluminum Black Anodized Packaged Part Number

Aluminum Blue Anodized Packaged Part Number

N

ippl (A e

N

e

P

e

ip

Ma

l

I N T RA O DA UP CT TE IO RN S

ADAPTERS (CONT.)

Tube Fittings 1

e

e

be

T

F rrul .25 .38 .50 .63 .75

.82 .86 1.08 1.12 1.36

B

A

-04 -06 -08 -10 -12

Tube O.D.

A

u

Dash Size

FCM2491 FCM2492 FCM2493 FCM2494 FCM2495

B

ess

e

37°

Part Number

.82 .86 1.08 1.12 1.35

7⁄16-20 9⁄16-18 3⁄4-16 7⁄8-14 11⁄16-12

A

.25 .38 .50 .63 .75

Thread

-04 -06 -08 -10 -12

a

a

Versil•Fl reTM Fl r l

Tube O.D.

be N

T

ut1

Dash Size

ess

u

FCM2496 FCM2497 FCM2498 FCM2499 FCM2500

A

Part Number

e

a

a

Versil•Fl reTM Fl r l

.25 .38 .50 .62 .75

1Versil•Flare tube nut and tube sleeve are only to be used together.

AN numbers are for configuration reference only.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

22 23

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

Number Per Package

“A” Pipe Size

“A” Dash Size -03 -04 -05 -06 -08 -10 -12 -14 -16 -20

A

Steel Packaged Part Number FCM3667 FCM3668 FCM3679 FCM3680 FCM3681 FCM3682 FCM3683 FCM3696 FCM3697 FCM3698

Aluminum Black Anodized Packaged Part Number FCM5669 FCM5670 — FCM5671 FCM5672 FCM5673 FCM5674 — FCM5831 FCM5832

N

819)1

Aluminum Blue Anodized Packaged Part Number FCM3669 FCM3670 — FCM3671 FCM3672 FCM3673 FCM3674 — FCM3831 FCM3832

No. Per Pkg. Steel 1 1 1 1 1 1 1 1 1 1

v (A e

ee

Sl

No. Per Pkg. Alum.

6 6 — 2 2 2 2 — — —

“A” Dash Size -03 -04 -05 -06 -08 -10 -12 -14 -16 -20

A

Steel Packaged Part Number FCM3591 FCM3570 FCM3571 FCM3572 FCM3573 FCM3574 FCM3575 FCM3576 FCM3577 FCM3578

Aluminum Black Anodized Packaged Part Number FCM5554 FCM5555 — FCM5675 — FCM5677 FCM5678 — FCM5829 FCM5830

Aluminum Blue Anodized Packaged Part Number FCM3554 FCM3555 — FCM3675 FCM3676 FCM3677 FCM3678 — FCM3829 FCM3830

u

be

T

818)1

ut (A

N

N

be

u

Number Per Package 6 6 2 2 2 2 2 1 1 1

Caps and Plugs C p (A a

N

929)2

All n H e

Aluminum Blue Anodized Packaged Part Number FCM3751 FCM3752 — FCM3740 FCM3741 FCM3742 FCM3743 FCM3744 FCM3567

Aluminum Black Anodized Packaged Part Number FCM5751 FCM5752 — FCM5740 FCM5741 FCM5742 FCM5743 FCM5744 FCM5567

A

O

-ring Bo

ss

lug (A

P

N

No. Per Pkg. Alum.

2 2 — 1 1 1 1 1 —

“A” Dash Size -03 -04 -05 -06 -08 -10 -12 -16 -20

No. Per Pkg. Steel 6 6 2 2 2 2 2 1 1

INCHES

FCM3684 FCM3685 FCM3686 FCM3687 FCM3749 FCM3750

A

A

lug (A

P

N

e

2 2 2 2 1 1

1⁄16 1⁄8 1⁄4 3⁄8 1⁄2 3⁄4

FCM5684 FCM5685 FCM5686 FCM5687 FCM5749 FCM5750

“A” Dash Size -03 -04 -06 -08 -10 -12 -16 -20

932)

Aluminum Black Anodized Packaged Part Number

N

lug (A

P

a

e

Fl r

814)

Aluminum Aluminum Blue Black Anodized Anodized Packaged Packaged Part Part Number Number FCM3722 FCM5722 A FCM3723 FCM5723 FCM3724 FCM5724 FCM3725 FCM5725 FCM3726 FCM5726 FCM3727 FCM5727 FCM3827 FCM5827 FCM3828 FCM5828 For replacement O-rings see Page 37.

Steel Packaged Part Number FCM3479 FCM3480 FCM3601 FCM3602 FCM3603 FCM3604 FCM3605 FCM3566 FCM3567

ip

ead P

Aluminum Blue Anodized Packaged Part Number

RC ST IA IN NDT TAR RPO OTD DEU U C T II O ON N

T

ADAPTERS (CONT.)

806)

Aluminum Blue Anodized Packaged Part Number FCM3712 FCM3713 FCM3714 FCM3715 FCM3716 FCM3717 FCM3718 FCM3719

Aluminum Black Anodized Packaged Part Number FCM5712 FCM5713 FCM6714 FCM5715 FCM5716 FCM5717 FCM5718 FCM5719

Steel Packaged Part Number FCM3701 FCM3702 FCM3703 FCM3704 FCM3705 FCM3706 FCM3707 FCM3708

“A” Dash Size -03 -04 -06 -08 -10 -12 -16 -20

TechTip Abrasion Concerns

Abrasion is one of the leading causes of hose failures. AQP Racing Hose offers a great steel “armor cover”, and StartLite offers the industry’s best abrasion resistance of any lightweight hose. Regardless of the type of hose, always route the hose correctly and use support clamps where needed. See page 52 for routing tips.

AN numbers are for configuration reference only.

1Tube nut and tube sleeve are only to be used together.

2Aluminum tube caps are 2 piece.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

24 23 23

O-ring Boss (ORB) to Male AN e

l 37°

— — — — — — — FCM2957* FCM2958* — FCM2959* FCM2960* — —

-04 -06 -08 -06 -08 -08 -10 -10 -12 -10 -12 -16 -12 -16

Aluminum Nickel-Plated Packaged Part Number

“A” Dash Size

“B” Dash Size

FCE2263*

-12

-12

-04 -06 -08 -06 -08 -10 -08 -10 -10 -12 -12 -12 -16 -16

“B” Dash Size

FCM5263*

FCM2263*

e

Aluminum Black Packaged Part Number

B

— — — — — — — FCE2953* FCE2954* — FCE2955* FCE2956* — —

“A” Dash Size

l 37°

Aluminum Blue Anodized Packaged Part Number

A

to

ss

O

e

f

-ring Bo

low pro il 90°

Steel Packaged Part Number

FCM5992* FCM5993* FCM5995* FCM5996* FCM5997* FCM5998* FCM5999* FCM5953* FCM5954* FCM6001* FCM5955* FCM5956* FCM6002* FCM6003* Ma

B

Aluminum Nickel-Plated Packaged Part Number

FCM2992* FCM2993* FCM2995* FCM2996* FCM2997* FCM2998* FCM2999* FCM2953* FCM2954* FCM3001* FCM2955* FCM2956* FCM3002* FCM3003*

Aluminum Black Anodized Packaged Part Number

A

Aluminum Blue Anodized Packaged Part Number

Ma

ss

to

O

-ring Bo

I N T RA O DA UP CT TE IO RN S

ADAPTERS (CONT.)

AN to Metric

“B” Pipe Size

-04 -06 -06 -06 -06 -08 -08 -10

10MM x 1.0 12MM x 1.5 14MM x 1.5 16MM x 1.5 18MM x 1.5 16MM x 1.5 18MM x 1.5 18MM x 1.5

— FCE2246 FCE2240 — — FCE2243 — —

B

“A” Dash Size

— FCM5246 FCM5240 FCM5241 — FCM5243 FCM5244 FCM5245

Aluminum Nickel-Plated Packaged Part Number

FCM2239 FCM2246 FCM2240 FCM2241 FCM2242 FCM2243 FCM2244 FCM2245

Aluminum Black Anodized Packaged Part Number

Aluminum Blue Anondized Packaged Part Number

A

s

e

pt r

da

c

Me

e

tri A

a

Fl r to

N

A

e

“B” Pipe Size

-06 -06 -06

1⁄2-20 5⁄8-18 11⁄16-18

“A” Dash Size

Steel Packaged Part Number

a

ed

e

I

Fl r

INCHES

FCM2963 FCM2964 FCM2965

B

A

FCM2608 -06 M16 x 1.5 FCM2609 -06 M18 x 1.5 Note: Used for Saginaw Power Steering Adapter (metric); also G.M. fuel injection conversion adapter for metric O-ring style porting.

nv rt

“B” Pipe Size

B

A

“A” Dash Size

s

e

pt r

Steel Packaged Part Number

da

s

e

c

tri Conv r ion A

Me

High Pressure Adapters

*O-ring material is Viton.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

24 25

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ADAPTERS (CONT.)

a

“B” Tube O.D.

“A” Dash Size

ed

a

e

a

)

Steel Packaged Part Number

871)

-03 -04 -04 -05 -06 -08 -10 -12 -16 -20

-03 -04 -06 -05 -06 -08 -10 -12 -16 -20

Aluminum Black Anodized Packaged Part Number

Steel Packaged Part Number

“A” Dash Size

“B” Dash Size

FCM5893 — — — — — — — —

— FCM2781 FCM2782 FCM2783 FCM2784 FCM2785 FCM2786 FCM2787 FCM2788

-03 -04 -05 -06 -08 -10 -12 -16 -20

-03 -04 -05 -06 -08 -10 -12 -16 -20

FCM2770 FCM2771 FCM2772 FCM2773 FCM2774 FCM2775 FCM2776 FCM2777 FCM2778 FCM2779

FCE2769 FCE2071 — — FCE2072 FCE2073 FCE2074 FCE2075 FCE2076 FCE2077

FCM5769 FCM5071 — — FCM5072 FCM5073 FCM5074 FCM5075 FCM5076 FCM5077

“A” Dash Size

“B” Dash Size

.16 .16 .16 .16 .16 .25 .25 .25 .25 .25

833)

FCM5799 FCM5081 — FCM5082 FCM5083 FCM5084 FCM5085 — —

FCE2799 FCE2081 — FCE2082 FCE2083 FCE2084 — — —

FCM2790 FCM2791 FCM2792 FCM2793 FCM2794 FCM2795 FCM2796 FCM2797 FCM2798

-03 -04 -05 -06 -08 -10 -12 -16 -20

-03 -04 -05 -06 -08 -10 -12 -16 -20

“B” Dash Size

“A” Dash Size

Steel Packaged Part Number

Aluminum Nickel-Plated Packaged Part Number

Aluminum Black Anodized Packaged Part Number

837)

B

A

Aluminum Blue Anodized Packaged Part Number FCM2799 FCM2081 — FCM2082 FCM2083 FCM2084 FCM2085 FCM2086 —

Steel Packaged Part Number

nion1 (A

N

head

b

U

90° El ow Bulk

Aluminum Nickel-Plated Packaged Part Number

A

Aluminum Blue Anodized Packaged Part Number FCM2893 FCM2127 — FCM2128 B FCM2425 FCM2426 — — —

Aluminum Black Anodized Packaged Part Number

nion1 (A

N

head

b

45° El ow Bulk

U

FCM2769 FCM2071 — — FCM2072 FCM2073 FCM2074 FCM2075 FCM2076 FCM2077

B

A

832)

Aluminum Blue Anodized Packaged Part Number

nion2 (A

N

U

head

Bulk

C

Bulkhead Adapters

A

t

C

t

A

t

B

.59 .68 .75 .90 .93

1⁄4 3⁄8 1⁄2 1⁄2 5⁄8 3⁄4 3⁄4 1 1 1 1⁄4

1.56 1.75 1.87 2.00 2.25

-04 -06 -06 -08 -10 -10 -12 -12 -16 -20

“C”

-06 -08 -10 -12 -16

FCM2871 FCM2872 FCM2873 B FCM2874 FCM2875 FCM2876 FCM2877 FCM2878 FCM2879 FCM2880

“B”

FCM2403 FCM2404 FCM2405 FCM2406 FCM2407

“A” Dash Size

Packaged Part Number

“C” Counterbore Depth

INCHES

N

s

l ing Bung (A d

Ta

nk

We

Connects to Male AN Flare with hex and O-ring (AN 816, AN 919, AN 832 and O-ring Boss Plug). Refer to Page 24 for O-rings.

e

Fl r to Br z (unpl t a

f

c

f

e

a

s

ce

e

efe

Special Flare Adapters

r r or on igur tion only.

be

num r n

N

A r

ST I O N IANDTARPOTDEURC

Aluminum Tank Welding Bungs

AN numbers are for configuration reference only.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

26 25

Aluminum Black Anodized Packaged Part Number

Steel Packaged Part Number

FCM2808 FCM2091 — FCM2092 FCM2093 FCM2899 — —

— FCM5091 — — — — — —

FCM2809 — FCM2811 FCM2812 FCM2813 FCM2814

-03 -04 -06 -08 -12 -16

-03 -04 -06 -08 -12 -16

-03 -04 -06 -08 -12 -16

“C” Dash Size

“C” Dash Size

“B” Dash Size

“A” Dash Size

tor2

“A” Dash Size

Steel Packaged Part Number

ec

e

a

e

head

F m l Conn

-04 -08 -10 -12 -16

A

“B” Pipe Size INCHES

FCM2821 B FCM2822 FCM2823 FCM2824 FCM2825

1⁄4 3⁄8 1⁄2 3⁄4 1

-04 -08 -10 -12 -16

1⁄8 3⁄8 1⁄2 3⁄4 1

924) Steel Packaged Part Number

FCM3556 FCM2099 — FCM2100 FCM2103 FCM2104 FCM2105 FCM2106 FCM3833

FCM5556 FCM5099 — FCM5100 FCM5103 FCM5104 FCM5105 FCM5106 —

FCE3556 FCE2099 — FCE2100 FCE2103 FCE2104 FCE2105 FCE2106 —

FCM2095 FCM2096 FCM2097 FCM2098 FCM3584 FCM3585 FCM3586 FCM3587 FCM3588

-03 -04 -05 -06 -08 -10 -12 -16 -20

Dash Size

Aluminum Nickel-Plated Packaged Part Number

Aluminum Black Anodized Packaged Part Number

Aluminum Blue Anodized Packaged Part Number

N

c

Steel Packaged Part No.

o knut (A

-03 -04 -05 -06 -08 -10 -12 -16

“B” Pipe Size

“A” Dash Size

INCHES

FCM2831 B FCM2832 FCM2833 FCM2834 FCM2835

L

Bulk

tor2 Steel Packaged Part Number

A

-03 -04 -05 -06 -08 -10 -12 -16

FCE2815 — — — — —

ec

e

l Conn

Ma

head

Bulk

-03 -04 -05 -06 -08 -10 -12 -16

FCM5815 — — — — —

C

FCM2800 FCM2801 FCM2802 FCM2803 FCM2804 FCM2805 FCM2806 FCM2807

FCM2815 FCM2117 FCM2118 FCM2180 FCM2816 —

B

A

“B” Dash Size

Aluminum Nickel-Plated Packaged Part Number

Aluminum Black Anodized Packaged Part Number

Aluminum Blue Anodized Packaged Part Number

N

804)

(A

1 Tee

R

un

head

Bulk

“A” Dash Size

C

B

A

Aluminum Blue Anodized Packaged Part Number

N

Tee

head

834)

(A

1

Bulk

I N T RA O DA UP CT TE IO RN S

ADAPTERS (CONT.)

Number Per Package 2 2 2 2 1 1 1 1 1

AN numbers are for configuration reference only.

1Aluminum part numbers do NOT include locknut. Locknut must be ordered separately for aluminum parts. Steel parts DO include nuts.

2Locknut included.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

26 27

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ADAPTERS (CONT.)

ST I O N IANDTARPOTDEURC

Tee Adapters Aluminum Nickel-Plated Packaged Part Number

“A” Dash Size

FCM2060 FCM2061 FCM2062 FCM2063 FCM2064 FCM2065 FCM2066

FCM5060 FCM5061 FCM5062 FCM5063 FCM5064 FCM5065 —

FCE2060 FCE2061 FCE2063 FCE2064 — — —

-03 -04 -06 -08 -10 -12 -16

-03 -04 -06 -08 -10 -12 -16

-03 -04 -06 -08 -10 -12 -16

Aluminum Blue Anodized Packaged Part Number

Aluminum Black Anodized Packaged Part Number

Aluminum Nickel-Plated Packaged Part Number

“A” Dash Size

“B” Dash Size

“C” Pipe Size

FCM2187 FCM2121 FCM2122 FCM2123 FCM2251 FCM2252

FCM5187 FCM5121 FCM5122 FCM5123 — —

FCE2187 FCE2121 FCE2122 — — —

-03 -04 -06 -08 -10 -12

-03 -04 -06 -08 -10 -12

Aluminum Blue Anodized Packaged Part Number

Aluminum Black Anodized Packaged Part Number

Steel Packaged Part Number

FCM2714 FCM2124 — — FCM2125 — FCM2126 — — FCM2298 FCM2299 — —

FCM5714 FCM5124 — — FCM5125 — FCM5126 — — — — — —

FCM2700 FCM2701 FCM2703 FCM2702 FCM2704 FCM2705 FCM2706 FCM2707 FCM2708 FCM2709 FCM2710 FCM2711 FCM2712

“C” Dash Size

“B” Dash Size

825)

N

Tee

ch

a

e

(A

Ma

l Br n

C

B

A

Aluminum Black Anodized Packaged Part Number

Aluminum Blue Anodized Packaged Part Number

1⁄8 1⁄8 1⁄4 3⁄8 3⁄8 34

-03 -04 -04 -05 -06 -06 -08 -08 -10 -10 -12 -16 -20

1⁄8 1⁄8 1⁄4 1⁄8 1⁄4 3⁄8 3⁄8 1⁄2 1⁄2 3⁄4 3⁄4 1 1 1⁄4

“C” Dash Size

“B” Pipe Size

“A” Dash Size

826)

N

(A

Tee

R

e

un

Ma

l

C

B

A

INCHES

Tee

“C” Dash Size

1⁄8 1⁄8 1⁄4

-03 -04 -04

“B” Pipe Size

B

A

“A” Dash Size

Steel Packaged Part Number

a

e

e

P

e

a

e

ip Fl r

-03 -04 -04 -05 -06 -06 -08 -08 -10 -10 -12 -16 -20

INCHES

C

-03 -04 -04

FCM2817 FCM2818 FCM2819

1⁄8 1⁄8 1⁄4 1⁄4 3⁄8

“C” Pipe Size

-03 -04 -04 -06 -08

-03 -04 -04 -06 -08

FCM2881 FCM2882 FCM2883 FCM2884 FCM2885

C

“B” Dash Size

INCHES

B

Steel “A” Packaged Dash Part Number Size A

F m l

Tee

e

a

ip Fl r e

P

a

e

e

C

B

A

INCHES

F m l

824)

N

Tee

(A

U

nion

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

28 27 27

-4 -6 -8 -10 -12 -16

-4 -6 -8 -10 -12 -16

-4 -6 -8 -10 -12 -16

“A” Pipe Size

“B” Pipe Size

“C” Pipe Size

INCHES

INCHES

INCHES

1⁄8 1⁄4 3⁄8

1⁄8 1⁄4 3⁄8

1⁄8 1⁄4 3⁄8

“A” Dash Size

“B” Dash Size

“C” Dash Size

e

Ma

3⁄8 - 24 3⁄8 - 24 7⁄16 - 24 7⁄16 - 24 a

ed

Fl r

e

e

I

e

“A” Hose Fitting Dash Size

“B” Brake Thread Size

FCM2950 FCM2925

-04 -04

7⁄16 - 20 2.50 7⁄16 - 20 1.33

Length

Steel Packaged Part Number

a

e

Ma

e

a

e

e

a

e

e

FCM2937

-03 -04

3⁄8 - 24 3⁄8 - 24

“B” Brake Thread Size

B FCM2936

“A” Hose Fitting Dash Size

Steel Packaged Part Number

A

to F m l

[2 per package]

a

ed

e

Ma

S.A.E. 37° l Fl r nv rt Fl r

3⁄8 - 24 3⁄8 - 24

-03 -04 -03 -04

“B” Brake Thread Size

INCHES

B

-03 -04

B

FCM2932 FCM2933 FCM2934 FCM2935

l Fl r to 30° nv rt

[Short; 2 per package]

I

FCM2909 FCM2910

“B” Brake Thread Size

A

“A” Hose Fitting Dash Size

ed

e

I

e

a

“A” Hose Fitting Dash Size

Steel Packaged Part Number

A

e

e

a

e

Ma

[1 per package]

Steel Packaged Part Number

S.A.E. 37°

A

nv rt

Tee

e

l Fl r to F m l

a

S.A.E. 37° Fl r

l

B

A

1.07 1.14 1.07 1.14 1.14 1.16

e

a

e

INCHES

FCM2926 -03 3⁄8 - 24 FCM2927 -04 3⁄8 - 24 B A FCM2928 -03 3⁄8 - 24 FCM2929 -03 7⁄16 - 24 FCM2930 -04 7⁄16 - 24 FCM2931 -04 1⁄2 - 20 Note: FCM2926 has a 9/16” hex and FCM2928 has a 7/16” hex.

-04 -06 -08 -10 -12 -16

e

a

Ma

ed

e

I

[Long 2-3⁄ 8”; 2 per package]

“B” Brake Thread Size Length

“A” Hose Fitting Dash Size

-04 -06 -08 -10 -12 -16

S.A.E. 37° l Fl r to 42° nv rt Fl r

e

a

ed

e

Fl r

Steel Packaged Part Number

[Short; 2 per package]

I

e

a

e

Ma

l Fl r to 42° nv rt

Inverted Flare Brake Adapters S.A.E. 37°

-04 -06 -08 -10 -12 -16

FCM5254 FCM5255 FCM5256 — — —

Aluminum Black Packaged Part Number

FCM2255 FCM2256 FCM2257 FCM2258 FCM2259

B FCM2254

C

EE

Aluminum Blue Anodized Packaged Part Number A

T

RUN

T

ON

e

a

e

HE

C

FCE2150 — —

FCM5150 FCM5151 FCM5152

FCM2150 FCM2151 FCM2152

Aluminum Nickel-Plated Packaged Part Number

Aluminum Black Packaged Part Number

Aluminum Blue Anodized Packaged Part Number

B

F m l

A

FCM2281 FCM2282 B FCM2283 FCM2284 FCM2285 FCM2286

“C” Dash Size

b

“B” Dash Size

A

“A” Dash Size

C

-04 -06 -08 -10 -12

ottom

Aluminum Blue Anodized Packaged Part Number

917)

N

(A

Tee

e

P

e

a

ip

e

F m l

he

e

a

fe

h

ee

m l on t

-04 -06 -08 -10 -12

“C” Dash Size

C

-04 -06 -08 -10 -12

FCM2173 FCM2174 FCM2175 FCM2176 FCM2177

B

“B” Dash Size

“A” Dash Size

Aluminum Blue Anodized Packaged Part Number

A

wit

Tee

e

a

e

a

t

e

F m l Fl r

I N T RA O DA UP CT TE IO RN S

ADAPTERS (CONT.)

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

28 29

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ADAPTERS (CONT.)

e

a

c

Me

e

a

e

e

a

j

a

c

Me

FCM2947 FCM2948

-03 -04

10mm 10mm

Steel Packaged Part Number

“A” Thread Size

Crushwasher1 Part Number

FCM2923 FCM2968

10mm x 1.25 FCM3642 10mm x 1.5 FCM3642

a

Ma

e

“B” Brake Thread Size

A

“A” Hose Fitting Dash Size

j

a

c

A

FCM2941 FCM2942 B FCM2966 FCM2943 FCM2944 FCM2967

e

Me

10mm x 1 10mm x 1.25 10mm x 1.5 10mm x 1 10mm x 1.25 10mm x 1.5

-03 -03 -03 -04 -04 -04

“B” Brake Thread Size

“A” Hose Fitting Dash Size

e

a

c

Steel Packaged Part Number

[2 per package]

tri B n o

Steel Packaged Part Number

tri B n o Bolt

[1 per package]

tri Fl r

Me

e

a

e

Ma

l Fl r to

B

A

Metric Brake Adapters

10mm x 1 10mm x 1

FCM3642 FCM3513

-03 -04

3⁄8-24 7⁄16-20

FCM2945 FCM2946

FCM2921 FCM2922

A

“B” Brake Thread Size

l Fl r to

[2 per package]

Crushwasher1 Part Number

“A” Thread Size

“A” Hose Fitting Dash Size

j

a

Steel Packaged Part Number

tri Fl r

Steel Packaged Part Number

Metric Banjo Brake Adapters e

[1 per package]

B

A

S.A.E. 37°

S.A.E. B n o Bolt

S.A.E. 37°

3⁄8 3⁄8 7⁄16 7⁄16

-03 -04 -03 -04

B

A

l Fl r to F m l

[2 per package]

FCM2949 FCM2938 FCM2939 FCM2940

“B” Brake Thread Size

“A” Hose Fitting Dash Size

j

a

e

a

Steel Packaged Part Number

Ma

S.A.E. 37°

S.A.E. 37° Fl r to B n o [2 per package]

ST I O N IANDTARPOTDEURC

S.A.E. Banjo Brake Adapters

1Two crushwashers are required.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

30 29

Aluminum Banjo Fittings s

j

Hose Fitting Size

FCM1066

-06

FCM1067

-06

FCM1070

-06

FCM1069

-06

Packaged Part Number

a

B n o Fitting – For Use with AQP ® and Startlite® Racing Hose

IFNUTERLOS DYUSCTTEI M ON S

FUEL SYSTEM COMPONENTS

Application Banjo Fitting for Holley Single Feed 600-660 Series and all two barrel series with 9⁄16 -24 thread Replacement Crushwasher FCM3627

Banjo Fitting for Weber bowls with 12mm x 1.5 thread Replacement Crushwasher

Banjo Fitting for Solex Carburetors with 12mm x 1.25 thread Replacement Crushwasher FCM3627

Banjo Fitting for multiple carb application Holley 600-660 Series with 9⁄16 - 24 thread

-06

FCM1068

Replacement Crushwasher FCM3627

Banjo Fitting for multiple carb application Weber 12mm x 1.5 thread Replacement Crushwasher FCM3627

Refer to Page 37 for Replacement Crushwashers and Replacement O-rings.

a

ed

e

I

e

a

1.07 1.14

1⁄2-20 1⁄2-20

Ma

e

FCM2181 FCM2182

-03 -04

B

A

­

Length INCHES

­­

e

INCHES

-10

FCE2185

3⁄8 Male pipe to Flare for Holley Electric Fuel Pumps

-10

Thread Size 3⁄8

FCM2185

pt r

Packaged Hose Part Fitting Number Dash Size

da

P

e

Fu l ump A

ed

a

P

e

c

N

e

i k l- l t

l

Inverted Flare 1⁄2-20 thread

Ma

“B” Brake Thread Size

-06

Inverted Flare 5⁄8-18 thread

Fl r

Packaged “A” Part Hose Fitting Number Dash Size

FCM2111

-06

Application

FCM2108

Hose Fitting Size

Blue Anodized Packaged Part Number

l Fl r to 42° nv rt

s

e

da

P

S.A.E. 37°

pt r

e

Fu l ump A

e

Aluminum Fuel Pump Adapters

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

30 31

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

FUEL SYSTEM COMPONENTS (CONT.)

1⁄4 3⁄8

1⁄8 1⁄8

INCHES

3⁄8 1⁄2

C

“D” Pipe Size

INCHES

1⁄4 3⁄8

FCM2178 FCM2179

“C” Pipe Size

INCHES

— FCE2179

“B” Pipe Size

INCHES

— FCM5179

“A” Pipe Size

Nickel-Plated Packaged Part Number

Black Packaged Part Number

c

e

s

Blue Anodized Packaged Part Number

B

A

D

e

pt r

-06 -08

-06 -08

“B” Dash Size

“A” Dash Size

Nickel-Plated Packaged Part Number

“C” Pipe Size

INCHES

FCM2183 FCM5183 FCE2183 C FCM2184 FCM5184 FCE2184 Note: Ports A and B to carburetor; C = gauge port; and D = main feed.

Black Packaged Part Number

B

A

Blue Anodized Packaged Part Number

da

ur A e

ess

P

e

e

L

n- in Fu l r

I

Aluminum In-Line Fuel Pressure Adapter

1⁄8 1⁄8

af

s

e

b

a

e

FCP0140

s

c

d

P

d

h

Packaged Part Number

ro u t wit Holl y C r ur tor Description

30” FBA0600 AQP® Racing Hose FBM1012 Aluminum Fitting FBM4032 Aluminum Fitting FBM1066 Aluminum Fitting FBM2111 Adapter

t r 1974 e

ad

h

s

c

d

P

Qu

For

30” FBA0600 AQP® Racing Hose FBM1012 Aluminum Fitting FBM4032 Aluminum Fitting FBM2114 Adapter FBM2108 Adapter

Packaged Part Number FCP0139

1974

Description

ro u t wit

h

h

ad

h

s

c

d

P

t roug

FCP0138

GM

Qu

Packaged Part Number

GM

Fuel Pump to Carburetor Hose Kits ro u t wit

S IFNUTERLOS DYUSCTTEI M ON

Fu l Blo k

Aluminum Fuel Blocks

Description 30” FBA0600 AQP® Racing Hose FBM1012 Aluminum Fitting FBM4032 Aluminum Fitting FBM2108 Adapters (2)

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

32 31

s

e

FCM5113

FCE2113

-06

Holley Single Feed 600-660 Series, 4010/4011 Series and all two barrel series with 9⁄16-24 thread; fits Demon carburetors Replacement Crushwasher FCM3514

FCE2114

-06

Holley Dual Feed 750 through Dominator 1350 Series and Quadrajet up to 1974 with 7⁄8-20 thread Replacement Crushwasher FCM3516

—

—

-08

Holley Dual Feed 750 through Dominator 1350 Series and Quadrajet up to 1974 with 7⁄8-20 thread; available in steel only Replacement Crushwasher FCM3516

FCM5110

FCE2110

-08

Holley Dual Feed 750 through Dominator 1350 Series and Quadrajet up to 1974 with 7⁄8-20 thread Replacement Crushwasher FCM3516

—

-06

Holley Dual Feed 750 through Dominator 1350 Series and Quadrajet up to 1974 with 7/8-20 thread Replacement Crushwasher FCM3516

FCE2192

-08

Holley Dual Feed 750 through Dominator 1350 Series and Quadrajet up to 1974 with 7⁄8-20 thread Replacement Crushwasher FCM3516

FCE2107

-06

Quadrajet 1975 and later 1-20 thread Replacement Crushwasher FCM3517

FCE2112

-06

Carter AFB two and four barrel with 5⁄8-20 thread Replacement O-ring FCM3489

FCE2116

-06

Weber Bowl Fitting 12mm x 1.5 thread

FCE2247

-06

Demon carburetors or applications with 9/16-24 threads and -06 female swivel Replacement Crushwater FBM3514

FCR2248

-08

Demon carburetors or applications with 9/16-24 threads and -08 female swivel Replacement Crushwater FBM3514

—

-08

Demon carburetors or applications with 9/16-24 threads and -08 male swivel Replacement Crushwater FBM3514

FCM2113

Hose Fitting Size

Nickel-Plated Packaged Part Number

Black Anodized Packaged Part Number

e

b

pt r

Blue Anodized Packaged Part Number

FCM5114

FCM2114

FCM2961

FCM2110

a

C r ur tor A

da

Aluminum Carburetor Adapters

FCM5193

FCM2193

FCM5192

FCM2192

FCM5107

FCM2107

FCM5112

FCM2112

FCM5247

FCM5116

FCM2247

FCM2116

FCM5248

FCM2248

—

FCM2249

IFNUTERLOS DYUSCTTEI M ON S

FUEL SYSTEM COMPONENTS (CONT.)

Application

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

32 33

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

FUEL SYSTEM COMPONENTS (CONT.)

es

Distance Hose Between Bowl and Fitting Fittings Dash Size

Packaged Carburetor Part Number Application

e

e

b

a

s

Holl y’ 4010/4011 C r ur tor S ri e

wit

h

se

f

K

e

b

a

C r ur tor it or u

INCHES

-06

8.25

Holley 4010/4011

FCP0129

S IFNUTERLOS DYUSCTTEI M ON

Dual Feed Carburetor Assemblies

Completely assembled—ready to install.

b

m ly

INCHES

-06

FCP0102

600 & 650 CFM Holley

8.62

-06

9.25

800 & 850 CFM Holley

FCP0101

s

Distance Hose Between Bowl and Fitting Fittings Dash Size

Packaged Carburetor Part Number Application

e

b

a

e

f

m ly or Holl y C r ur tor b

sse

eed

A

INCHES

750, 800 & 850 CFM Holley 9.25

FCP0134

a

1⁄ 20 Du l F

Distance Hose Between Bowl and Fitting Fittings Dash Size

Packaged Carburetor Part Number Application

sse

e

b

a

e

eed

Holl y C r ur tor A

a

Du l F

-08

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

34 33

s

n Coupling

POUNDS/FOOT

INCHES

INCHES

INCHES

20-24† 20-40† 20-24† 20-40† 30-50† 30-60† 30-60† 30-60† 30-60† 20-24† 20-24† 20-24† — — — — — — — — — —

Full Flow Male Half 1⁄2-20-UNF-2A* 1.52” .96” 1 1⁄16” Full Flow Male Half M18 x 1.5 6g* 1.52” .96” 1 1⁄4” Full Flow Male Half M14 x 1.25 6g* 1.52” .96” 1 1⁄16” Full Flow Male Half 5⁄8-18-UNF-2A* 1.52” .96” 1 1⁄16” Full Flow Male Half 3⁄4-16-UNF-2A** 1.52” .96” 1 1⁄4” Full Flow Male Half 7⁄8-14-UNF-2A** 1.52” .96” 1 1⁄4” Full Flow Male Half M20 x 1.5 6g** 1.52” .96” 1 1⁄4” Full Flow Male Half M22 x 1.5 6g** 1.52” .96” 1 1⁄4” Full Flow Male Half 1 1⁄16-12-UN-2A** 1.52” .96” 1 1⁄2” Full Flow Male Half M12 x 1.5 6g* 1.52” .96” 1 1⁄16” Full Flow Male Half M14 x 1.5 6g* 1.52” .96” 1 1⁄16” Full Flow Male Half M12 x 1.75 6g* 1.52” .96” 1 1⁄16” Full Flow Female Half Fits All 2.34 1.50 — Replacement Cap Fits All 0.726 1.25 — Replacement Gasket Fits: 1/2-20, M12 x 1.5, M12 x 1.75 — — — Replacement Gasket Fits: M14 x 1.25, M14 x 1.50 — — — Replacement Gasket Fits 5/8 -18 — — — Replacement Gasket Fits: 3/4 -16, M18 x 1.50 — — — Replacement Gasket Fits: M20 x 1.50 — — — Replacement Gasket Fits: 7/8 -18, M22 x 1.50 — — — Replacement Gasket Fits: 1 1/16 -12 UN — — — Blue SOCKETLESS™ — — — Hose (dash 10) ^Male half comes complete with anodized aluminum cap and gasket †Failure to meet minimum assembly torque could result in fluid leakage. Caution: Do not over torque.

FCM3126^ FCM3127 FCM3128 FCM3129 FCM3130 FCM3131 FCM3132 FCM3133 FCM3134 FCM3135 FCM3136 FCM3137 FCM3117 FCM3118 FCM3119 FCM3120 FCM3121 FCM3122 FCM3123 FCM3124 FCM3125 FBV1000

Min. Assembly Torque

A B Hex Dimension Dimension Size

Thread Size

Packaged Part Number Description

il

Pa

a

c

Qui k-Dr in

Great for street cars, hot rods, boats, racecars, anything that you need to drain fluid from in a clean and efficient way. Eliminates the potential of spillage — drains directly into a waste container. Makes changing your oil quick, clean, and fun!

O

The Easy, Quick, and High-Tech Way to Change Your Oil — Eaton’s Aeroquip Performance Product’s QUICK-DRAIN Oil Pan Coupling

INTR CO OD UU PC L ITNI O GN S

COUPLINGS

Flow Rate (17˚F 10W30 Oil) * Approximately 0.24 GPM ** Approximately 0.68 GPM

.34 .36

4.10 4.25

.10 .10

INCHES

.02 .02

3000 3000

Fluid Loss (C.C. Length Total Seal Max.) Connector Weight Material

Coupling

ch

d

a

Clut

PSI

FBM1073 -03 FBM1074 -04

INCHES

EPR EPR

Replacement Parts -03 Male Half (Bulkhead Mount) -04 Male Half (Bulkhead Mount) -03 Female Half -04 Female Half

FBM1115 FBM1116 FBM1117 FBM1118

Disconnected

n

Hose Fitting Maximum Air Dash Operating Inclusion Size Pressure (C.C. Max.)

Steel Bulk Part Number

a

c

a

d

Hy r uli Br k

­­

­

tion. Available with -03 or -04 S.A.E. 37° (JIC/AN) threads. The male half includes a jam nut for bulkhead mounting. Tem perature range -40°F to +250°F. For use with nonpetroleum brake fluids. ­

This coupling allows rapid connection/disconnection of brake and clutch lines without fluid loss, air inclusion and the need to bleed the line. It also includes a safety clip on the lanyard to prevent accidental disconnec-

e

Quick-Disconnect Brake and Clutch Coupling

Connected

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

34 35 34

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

COUPLINGS (CONT.)

ead

DEGREES F

PSI

OUNCES

Viton Viton Viton

1.73 1.60 3.97

-15 to +300 -15 to +300 -15 to +300

FBM3113 FBM3114

Seal Material

Male Aluminum Lightweight Quick Disconnect Coupling 250 Female Steel Quick Disconnect Coupling 250 Female Aluminum Quick Disconnect Coupling 250

Weight

Th

Temperature

r

Working Pressure

Description

FBM1153

ill Coupling – 1/2”

Ref

a

Rad

i tor/Cooling

aluminum body • Easy connect/disconnect with positive locking • For use with aluminum male coupling half (FBM1153) ale Half: • Replacing previous carbon steel components with stainless steel mate-

M

disconnect coupling is 50% lighter than standard version* • Viton seals allows higher temperatures • Stainless steel internal components significantly increase corrosion resistance Bulk Number

rial significantly improve the corrosion resistance of the popular coupling • Red anodized 6061 aluminum body • 54% lighter than standard steel version • Viton seals allows higher temperatures

• Blue anodized 6061

• Aluminum female quick-

Pressure Sensing Coupling The primary feature of FCM3080 series QuickDisconnect coupling is self-sealing valves in both halves, allowing connec tion and disconnection with minimal fluid loss and virtually no air inclusion. The FCM3080 series quick-disconnect coupling is ideal for gauge, diagnostic, wing and chassis adjustment applications. ­

­

­

­

­

­

­

­

­

­

­

­

­

­

­

­

­

­

­

­

­

­

­

­

r

­

­

O

ring n orm tion

de

I

f

a

Sp

Packaged Coupling Part Body Number Size Description

Thread Size

INCHES

tion

ca

PSI

1⁄8-27-NPTF 1⁄4-18-NPTF 1⁄8-27-NPTF 1⁄4-18-NPTF 1⁄8-27-NPTF 1⁄4-18-NPTF —

INCHES

1.95 2.25 1.60 1.49 1.70 1.90 —

.1 .1 .1 .1 .1 .1 —

.02 .02 .02 .02 .02 .02 —

7000 7000 7000 7000 7000 7000 —

INCHES

s

Maximum Air Operating Inclusion Fluid Loss Pressure (C.C. Max) (C.C. Max) Length

FCM3081 1⁄4 Female Coupling to Female Pipe FCM3082 1⁄4 Female Coupling to Female Pipe FCM3083 1⁄4 Male Coupling to Male Pipe FCM3084 1⁄4 Male Coupling to Male Pipe FCM3085 1⁄4 Male Coupling to Female Pipe FCM3086 1⁄4 Male Coupling to Female Pipe FCM3087 1⁄4 Male Coupling — Dust Cap Note: Not for use with brake fluid.

f

i i

ec

SI O N ICNOTURPOLDI N UG CT

Female Half:

Quick-Disconnect Radiator/ Cooling Refill Coupling

­

r

Fuel Check Coupling

Ideal for use to meet NHRA fuel check requirements. Male half mounts in the fuel line.

O

Ideal for use with FCM2178, FCM2179, FCM2183 and FCM2184.

ring n orm tion

de

I

f

Packaged Part Number Description

Max. Thread Size

INCHES

ec

Operating Pressure

Female Coupling 1⁄8-27 to Female Pipe NPTF Male Coupling 1⁄8-27 to Male Pipe NPTF

PSI

f

ca

tion

s

Air Inclusion (C.C. Max.)

Fluid Loss (C.C. Length Max.)

INCHES

7000

i i

.02

.1

1.95

.02

.1

1.60

FCM3083

r

O

nect/disconnect coupling.

The coupling bodies are constructed of high quality plated steel. Coupling uses Buna-N seals.

Sp

d

PUSH-PULL™ SelfSealing Couplings are ideal for most hydraulic and fluid applications requiring a quick con-

a

FCM3081

Hydraulic Coupling

n

a

7000

ring n orm tion

de

I

f

a

Steel Bulk Pipe Max. Part Thread Operating Number Size Pressure

INCHES

n

a

Sp

d

Air Inclusion (C.C. Max.)

ec

i i f

ca

PSI

GPM

s

FBM3011 1⁄4-18 5000 .5 .5 1 FBM3012 3⁄8-18 4000 1.5 1.3 6 FBM3013 1⁄2-14 4000 2.8 2.8 12 FBM3015 3⁄4-14 4000 10.0 8.2 28 FBM3016 1 11-1⁄2 4000 14.2 14.2 50 Note: Not recommended for brake system applications.

tion

Fluid Loss (C.C. Rated Coupled Vacuum Max.) Flow Length Service

INCHES

INCHES/HG

2.53 2.80 3.78 4.56 5.54

28 28 28 28 28

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

36 35 35

Aluminum Caps and Plugs for Fitting and Adapter Thread Protection s

P

20 20 20 20 12 10 10

.61 .71 .77 .90 .95 .99 1.08

Pkg. Of

s

eaded

3⁄8–24 7⁄16–20 9⁄16–18 3⁄4–16 7⁄8–14 11⁄16–12 15⁄16–12

C

tion

s

ca

f

i i

firesleeve to match each hose size. For other hose styles, select firesleeve with an I.D. slightly larger than the hose O.D.

Bulk *Part Number* I.D.

INCHES

.44 .50 .56 .62 .69 .75 .81 .88 1.00 1.12 1.25 1.38 1.50

FBS0700 FBS0800 FBS0900 FBS1000 FBS1100 FBS1200 FBS1300 FBS1400 FBS1600 FBS1800 FBS2000 FBS2200 FBS2400

tion

s

D

E

INCHES

INCHES

.301 .351 .468 .644 .755 .924 1.171 1.475 1.720

.064 .072 .078 .087 .097 .116 .116 .118 .118

-03 -04 -06 -08 -10 -12 -16 -20 -24

D

FCM3462 FCM3463 FCM3464 FCM3465 FCM3466 FCM3467 FCM3468 FCM3469 FCM3470

Dash Size

E

FCM3472 FCM3473 FCM3474 FCM3475 FCM3476 FCM3477 FCM3497 FCM3498 FCM3499

-03 -04 -06 -08 -09 -10 -12

FCM3642 FCM3513 FCM3514 FCM3515 FCM3627 FCM3516 FCM3517

Dash Size

Packaged Part Number

5-Piece Package EPR2 Part No.

10-Piece Package Nitrile1 Part No.

­

ca

i i f

ec

p

s

O-rings

.57 .61 .76 .94 1.11 1.38 1.53

s

ca

f

ec

s

.37 .46 .50 .61 .70 .65 .71

-03 -04 -06 -08 -10 -12 -16

5 5 5 5 5 5 5 5 2 2 2 2 2

For use with Banjo Fittings and Carburetor Adapters [5 per package]

FBM3654 FBM3655 FBM3656 FBM3657 FBM3658 FBM3659 FBM3660

.25 .44 .50 .56 .63 .75 .81 .94 1.00 1.06 1.13 1.25 1.50

Replacement Aluminum Crushwashers tion

B

INCHES

FCM3481 FCM3482 FCM3483 FCM3484 FCM3485 FCM3486 FCM3487 FCM3488 FCM3534 FCM3535 FCM3536 FCM3537 FCM3538

i i

A

Number Per Package

ec

Sp Packaged Part Number I.D.

p

INCHES

Firesleeve hose flame shield can prevent or delay hose lines from burning. See hose specifications shown in this catalog for the correct

tion

this catalog for the correct hose clamp to match each hose size. For other hose types, match the clamp I.D. and hose O.D. as close as possible.

s

ca

f

i i

Dimensions

Fitting and Part Adapter Number Dash Size Thread

624 Firesleeve Hose Cover

Vinyl-coated steel support clamps provide security for supporting hose in long runs and critical bends. See hose specifications shown in Sp

Support Clamps

Pkg. Of 20 20 20 20 12 10 10

B .36 .46 .46 .55 .65 .76 .78

A .43 .54 .54 .64 .74 .85 .86

Thread 3⁄8–24 7⁄16–20 9⁄16–18 3⁄4–16 7⁄8–14 11⁄16–12 15⁄16–12

Part Number FBM3647 FBM3648 FBM3649 FBM3650 FBM3651 FBM3652 FBM3653

INCHES

Aluminum Du t lug

Dimensions

Fitting and Adapter Dash Size -03 -04 -06 -08 -10 -12 -16

r

Th

s

a

s

eaded

Aluminum Du t C p

Th

r

ec

I NATCRCOEDSU SC OTRIIO EN S

ACCESSORIES

*Order by the foot. Packaged firesleeve is available in various lengths.

Contact customer service for part numbers and prices.

1Nitrile O-rings for use with gasoline fuels.

2EPR (Ethylene Propylene Rubber) O-rings to be used with Nitromethane and alcohol fuels.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

36 37

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ACCESSORIES (CONT.)

a

f

I

ring n orm tion

de

r

O

d

a

s

Hose I.D.

INCHES

INCHES

FCM1006 FCM1007 FCM1008 FCM1010 FCM1009

.88 1.13 1.34 1.62 1.75

1.15 1.41 1.70 1.88 2.09

Hose O.D.

Packaged Part Number

ca

f

ec

-16 -20 -24 -28 -32

.44 .55 .65 .80 .94

n

lines. PRO CLAMP™ connectors come complete with a quality band clamp.

INCHES

tion

Hose O.D.

INCHES

i i

a

Hose Dash Size

f

Hose I.D.

Sp

-04 FCM1001 .22 -06 FCM1002 .34 -08 FCM1003 .44 -10 FCM1004 .56 -12 FCM1005 .69 Please see Page 46 for assembly instructions.

used on any rubber or stainless steel braid hose. PRO CLAMP™ connectors should not be used on brake lines, air conditioning, power steering or other high pressure

ring n orm tion I

de

O

r

Packaged Part Number

Hose Dash Size

n

d

tion

a

ca

f

i i

ec

Sp

s

PRO CLAMP™ connectors are made of red anodized aluminum to give your band clamp connections a professional look. The PRO CLAMP™ connector can be

Stainless Steel Overbraid Stainless Steel Overbraid is used to dress up existing rubber hoses. Stainless Overbraid simply slips over current radiator hoses and can be

INCHES

INCHES

­

a

15 Feet

20 Feet

FCR1206 FCR2406

FCR1210 FCR2410

FCR1215 FCR2415

FCR1220 FCR2420

10 Feet

FCR1203 FCR2403

6 Feet

3 Feet

3/4 1/2 to 1 3/4 FBR1200 1 1/2 1 1/2 to 2 1/4 1 1/2 FBR2400 Please see Page 46 for assembly instructions.

f

Packaged Length Part Number

INCHES

no additional performance for the hose. Stainless Overbraid does provide added abrasion resistance and good looks.

ring n orm tion

Bulk Part Number

Overbraid I.D.

Nominal I.D.

Hose O.D. Range

I

r

de

tion

s O

ca

f

i i

ec

Sp

clamped with the Aeroquip Performance Products PRO CLAMP™ connectors for a finished hose assembly look.

Stainless Overbraid provides

SN IANCTCREOSDSUOCRTI E IO

PRO CLAMP™ Aluminum Hose Connectors

Stainless Steel Internal Support Coils

Description

Length

.51” OD .73” OD .94” OD

20 20 20

a

f

I

ring n orm tion

de

r

O

d

a

ca

n

tion

Bulk Part Number

f

i i

ec

Sp

Hose Dash Size

s

Extra support for extreme vacuum applications.

FBM3412 FBM3413 FBM3414

Feet

-08 -12 -16

TechTip Vacuum: One of the most severe applications of a hose is in vacuum service. Modern dry sump oil systems are pulling more vacuum than

ever. It is extremely important that you match the hose you are using with the vacuum rating of your application. Eaton offers racing hoses with vacuum rating of up to 28 in./HG (Check hose specifications for vacuum rating). Great care should be taken in the handling and routing of hoses used in vacuum service. If a hose is installed beyond the minimum bend radius the vacuum rating will be reduced. Also, if a hose has been kinked or damaged and then put in vacuum service, the area that was kinked or damaged will be a weak spot and the vacuum rating of the hose will be reduced. For severe vacuum applications, an internal support coil may be needed. Contact Eaton Technical Support for additional information.

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

37 38 37

Toggle Switches Switches with the widest selection of features and design flexibility

­

­

These environmentally sealed toggle switches offer the widest selection of features and the design flexibility to meet a variety of performance applications. Our product is designed to meet Aerospace specifications, delivering the quality and level of consistent execution that is above all others.

All Eaton’s Aroquip® Toggle switches are completely sealed to moisture, dust, grease and a variety of other contaminants that can be harmful to the inner electronics. Don’t take a chance with your vehicle’s equipment, go with the name you trust, use Eaton’s Aeroquip Performance Products.

Features and Benefits • Completely sealed against dust, moisture and other contaminants • One, two and three pole circuitry • One hole mounting for easy installation • Multi-circuits offered • Two and three position with maintained and momentary action • Molded-in terminal inserts • Molded-in terminal numbers

8510

­

s

Catalog Number 8511K1 K9 K4 K6 K8 8511K5 K2 K7 K10 K11 8511K3 K12 K13 8511K14 K15 K16 8511K17 K18 K19

115VAC 60 or 400Hz Lamp Resistive Load Load 3 15 2 15 4 15 2 11 4 15 2 11

Catalog Number 8510K1 K9 K4 K6 K8 8510K5 K2 K7 K10 K11 8510K3 K12 K13 — — — — — —

Down Position Position (Keyway) ON OFF ON NONE NONE ON* ON* ON* OFF ON* ON* NONE NONE ON ON* ON* ON ON* ON*

Inductive Load 15 10 15 10 12 10

Center Position OFF NONE NONE OFF OFF* NONE OFF OFF NONE NONE OFF ON ON ON ON ON ON ON ON

Up Position ON ON ON ON ON ON ON* NONE ON OFF ON ON* ON ON ON ON* ON ON ON*

8512

4

8511

2

Resistive Load 20 15 20 18 20 18

Type of Operation Maintained Momentary Maintained Momentary Maintained Momentary

28VDC Lamp Load 5 4 7 5 5 4

Ra

Catalog No. 8510

No of Poles 1

8512

ting

e

Curr nt

8511

Applications • Ignition/Start • Accessory Controls: lights, pump, fan, etc.

Specifications • Water-tight seal per MIL-STD-108E and designed to meet IP68 • Thermoset molding materials meet flame retardant requirements • Temperature range: -500°F to +1500°F (-460°C to +660°C) • Life: 20,000 operations at rated load • Bushing: 15/32” -32 thread

­

I NATCRCOEDSU SC OTRIIO EN S

ACCESSORIES (CONT.)

Inductive Load 10 7 15 8 15 8 Catalog Number 8512K1 K9 K4 K6 K8 8512K5 K2 K7 K10 K11 8512K3 K12 K13 8512K16 K16 K17 — — —

Catalog number 8497KIC switch gaurd prevents accidental operation of switches in safety-critical applications. *Momentary contact

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

38 39

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ASSEMBLY EQUIPMENT

M

FC 3644 ­

­

­

­

To help mechanics, engineers and salespeople quickly and accurately identify ports and connectors used in racing plumbing, Performance Products is offering the FCM3644 Port and Identification Kit. Measuring and identifying both USA and foreign threads is made easy. The kit consists of five components:

1. A unique caliper, featuring four angle gauges that are built into the ID/OD measuring fingers. Angles include 37,° 45,° 12° (24° included) and 30° (60° included).

­

­

2. Bulletin JA 110, How to Identify Fluid Ports and Connectors. This bulletin provides port and connectors information with inch dimensions given in both fractions and decimals. Metric dimensions are given in both millimeters and inch decimals.

3. A handy, compact thread gauge, featuring 14 fold out blades with the following pitches per inch: 11, 11 1⁄2, 12, 14, 16, 18, 19, 20, 24, 27, and 28. Metric 1.0, 1.5 and 2.0 thread pitches are also included.

4. A flexible Fresnel magnifying lens (3x) for hard-to-read part numbers.

5. A vinyl pocket size carrying case.

Hand-Held Hose Cutter M

FC 3362

Cut-Off Tool T

F 1258 Bench mounted cut-off tool for all non-wire reinforced hose.

Eaton’s hand-held hose cutter has been specially designed for cutting all non-wire reinforced hose, such as Eaton’s Aeroquip Performance Products StartLite® and SOCKETLESS™ hose styles.

The cutter’s compact size makes it ideal for working in confined areas. It provides fast, accurate easy cuts—every time.

Hand-Held Hose Cutter Replacement Blade Tool Pouch

a

Description

FCM3662 FCM3663 FCM3664

Part Number

f

ring n orm tion I

r

de

O

d

n

a

s

tion

ca

i i f

Sp

ec

• Features a replaceable stainless steel blade that closes into its own handle for safe carrying and handling • Includes tough, durable nylon handles • Offered with an optional tool pouch • Saves time and effort due to its small size and lightweight design

IANSTSREOMDBULCYT IEOQNU I P M E N T

Port and Identification Kit

TechTip

The rotating/rocking technique produces fast easy cuts.

Keep Your Fittings Looking New Aluminum wrenches, FCM3410, and vise jaw inserts, FCM3661, are great for protecting the anodized coloring on your reusable fittings. Check out the assembly equipment section for more details..

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

40 39 39

FB 3632

FB 3646

The FBM3632 hand-held assembly tool is especially designed for quick and easy assembly of FBV SOCKETLESS Hose in sizes -04, -06, and -08. The hose is held in position by a manually operated clamp, and the fitting is positioned on the mandrel assembly lever.

The SOCKETLESS fitting is pushed into the hose by compressing the mandrel assembly lever.

The FCM3646 hand-held tool is designed to seat Teflon* tube against a sleeve. Use with smooth bore Teflon* hose in sizes -03, -04, -05, -06, -08, -10 and -12.

Aluminum Wrenches

Hose Assembly Lube

FC 3410

FB 3553

Sturdy, anodized aluminum wrenches are designed to fit the hexes and minimize marking of Aeroquip Performance Products anodized aluminum fittings for AQP® Racing Hose in sizes 6 through -20.

Color coded by size.

Eaton’s Aeroquip Performance Products Hose Assembly Lube is a specially compounded lubricant superior to any other lubricant used in hose assembly work. Available in pint containers. Use for either hand or machine assembly.

M

­

­

M

Teflon* Hose Tool

M

SOCKETLESS™ Fitting Assembly Tool

M

A S S E M B ILNYT R EO QD UU I PCMTEI O NN T

ASSEMBLY EQUIPMENT (CONT.)

Vise-Jaw Inserts for Anodized Fitting Protection M

FC 3661

FCM3661 vise-jaw inserts are a must for race teams, engine builders and street rodders. Keep your goodlooking Aeroquip Performance Products fittings looking good even after assembly. FCM3661 visejaw inserts firmly hold the hex of the fitting during assembly, without marring the anodized finish.

Made of aluminum with angled pockets, FCM3661 vise-jaw inserts can be used with any size fitting from -03 to -32.

A horizontal pocket the length of FCM3661 vise-jaws is ideal for securely holding steel braided hose in place, making straight cuts fast and simple.

­

­

FCM3661 vise-jaw inserts also feature magnetic backs, allowing quick setups and easy transfer between vises. *Teflon is a registered trademark of Dupont and under license by Eaton.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

40 41

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ASSEMBLY EQUIPMENT (CONT.)

• Pusher slides out of position.

• Red power coated housing protects user from moving machinery and providesx a sleek, aerodynamic design • Crimper body has a clear zinc finish to protect against corrosion.

• Utilizes 2-piece collet assemblies.

• Spacer rings control the crimp diameter.

• Qualified to crimp Aeroquip’s top selling hoses: AQP Stainless Braid, StartLite, and Teflon hoses with Aeroquip’a qualified aluminum crimp fittings.

Features

Relaunched with a sleek new housing, the new high performance crimper will compliment your high performance shop, race trailer, or garage.

This crimp machine has been approved to crimp:

• Eaton Aeroquip AQP® Racing and StartLite® hose in sizes –4 through –16, straight through 120˚ swivel. The StartLite hose is also qualified in –20 swivel.

• Aeroquip Racing Hose, Teflon* in –3, -4 and -6 sizes, straight through 90° The performance version of the ET1000 builds on the success of Eaton portable crimp machines by using a 2-piece split half collet assembly in lieu of traditional one-piece die cages. The correct hose assembly crimp diameter is obtained by the use of a spacer ring that controls the stroke length of the cylinder during the crimping operation.

Benefits

This ET1000 may be ordered separately or with one of one of two different power sources: a two-stage hand pump or the Air-Hydraulic pump. The crimper housing has been expanded to allow for a direct mount on the pump to the housing.

s

be

N

Pa

e

r

s

r

s

be

Crimp Diameter Range (in) 0.488 0.498 0.488 0.498 0.609 0.619 0.609 0.619 0.715 0.725 0.715 0.725 0.891 0.901 0.891 0.901 1.015 1.025 1.015 1.025 1.200 1.210 1.200 1.210 1.460 1.470 0.272 0.278 0.334 0.340 0.464 0.470

N

Flat Side (Up/Down) FSU FSU FSU FSU FSU FSU FSU FSU FSU FSU FSU FSU FSU FSU FSU FSU

rt um r 1.5 oz. Tube, high efficiency PTFE grease

ccess

Spacer Ring P/N ET1010SR-M305A ET1010SR-M305A ET1010SR-M100S ET1010SR-M100S ET1010SR-M055A ET1010SR-M055A ET1010SR-M395D ET1010SR-M395D ET1010SR-M395D ET1010SR-M395D ET1010SR-M240D ET1010SR-M240D ET1010SR-M115D ET1010SR-M205A ET1010SR-M115D ET1010SR-M055A

Collet Assembly T-400-2C T-400-2C ET1000DC-M150S ET1000DC-M150S T-400-3C T-400-3C ET1000DC-M195S ET1000DC-M195S ET1000DC-M230S ET1000DC-M230S T-400-5C T-400-5C T-400-6C ET1000DC-M065S ET1000DC-M065S T-400-120C

Hose End Lightweight Crimp Lightweight Crimp Lightweight Crimp Lightweight Crimp Lightweight Crimp Lightweight Crimp Lightweight Crimp Lightweight Crimp Lightweight Crimp Lightweight Crimp Lightweight Crimp Lightweight Crimp Lightweight Crimp Steel Crimp Steel Crimp Steel Crimp

ET1000-PHP-013

Hose Style FBA0400 FBU0400 FBA0600 FBU0600 FBA0800 FBU0800 FBA1000 FBU1000 FBA1200 FBU1200 FBA1600 FBU1600 FBU2000 FBC0300 FBC0400 FBC0600

A ory 140-06701

ET1000-PHP-002 with hand pump.

Includes collet and spacer ring tooling packages ET1000-PAP-003 with air/hydraulic pump.

Includes collet and spacer ring tooling packages

ET1000-PHP-012

Pa

um r ET1010SR-M205A ET1010SR-M055A ET1010SR-M240D s

Pa

rt

ace

Sp r ing ET1010SR-M305A ET1010SR-M100A ET1010SR-M115D ET1010SR-M395D

be

These machine packaged part numbers offer a variety of pumps with the same tooling package including all collets and spacer rings to crimp: • AQP Racing & StartLite Hoses (sizes -4 thru -16), straight through 120° swivel fittings.

• AQP StartLite has been qualified up to -20, straight through 120° swivel fittings.

• Aeroquip Racing Hose, Teflon* (sizes -3, -4 and -6), straight fitting.

N

s

um

be

N

rt

Pa

e

k g a

Pac

e

Mach

in

R

um

be

N

e

rt

No pump, no tooling (basic machine only)

E 1000 Crimp T

in

Mach

T

E 1000 Crimp ET1000-PHP-002

Pa

22” high, 16” wide, 14” in depth 80 lbs. (without pump)

Coll t rt um r T-400-2C T-400-5C T-400-3C T-400-6C T-400-120C ET1000DC-M065S ET1000DC-M195S ET1000DC-M150S ET1000DC-M1230S ET1000AR-001(Die Ring Adapter)

s

tion

ca

f

i i

ec

Sp

Dimensions Weight

• Sliding pusher allows for easier fitting insertion into the machine.

• Simple positive-stop crimp diameter control system for consistent crimping time after time with no operator adjustments required.

• Easily transported between job sites.

• Versatile power source options. Electricity is required only when using an electric style pump.

IANSTSREOMDBULCYT IEOQNU I P M E N T

ET1000 — Portable Crimp Machine

Die Ring Adapter Required Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

*Teflon is a registered trademark of DuPont and under license by Eaton.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

42 41

ProCrimp® 1380

FT1380-115 FT1380-275-M370

a

f

ring n orm tion I

r

de

e

T

F 1380 Di Crimp FT1380-1-1

O

The ProCrimp FT1380 is the industry’s easiest and fastest means of assembling Eaton’s Aeroquip Performance Products hose and fittings. The ProCrimp 1380 is electronically controlled to give fast, accurate crimps each and every time you need a hose assembly.

Includes machine, five die cages (-4, -16), instruction video.

Crimp machine only.

-20 crimp die cage

Features

• Fast, quite easy to use • Crimp -4 through -20, 4-spiral hose • Crimps Eaton’s Aeroquip Performance Products StartLite® and AQP® Racing Hose, and Racing Hose, Teflon* • Pre-set crimp settings • Programmable electronic controls • Easy to calibrate • Upright design • Standard work light • Simple die cage insertion • Full flow hydraulics with spring return • “Soft” retract position • ENERPAC® hydraulics

­ ­

The ProCrimp® 1380 uses an ENERPAC® 10,000 psi hydraulic pump and cylinder which provide quiet, efficient crimping. When the power unit is on, the electronic display and work light are lighted to indicate setup for crimping. The pump doesn’t actually begin to operate until the crimp toggle switch is activated, saving energy and motor wear. ­

­

Eaton ProCrimp® 1380 sets a new standard for simplified, fast crimping of hose assemblies. This machine can be set up in any shop, garage or work area to crimp 1 and 2 wire braid, 4 spiral, and many other hose stlyles offered by Eaton.

The standard work light on the ProCrimp® 1380 illuminates the top of the fittings being crimped in this upright crimp machine. The work area is highly visible due to the upright design. Viewing of the fitting during the crimping operation is easier than ever. And the ever popular FT1330XL “Oxley Locater” can be added to the die cages for use with MatchMate Plus TTC fittings for even easier location.

­

Minimizes training and mistakes Crimp popular hose styles Fast setup time Simplified crimping Minimal maintenance Minimal effort calibrating machine Easy hose insertion Easy to see work Fast cycle time Minimum cycle distance and time Reliable/serviceable/standardized

• • • • • • • • • • •

The ProCrimp® 1380 is totally compatible with Eaton’s MatchMate® Plus hose assembly program. Matching and mating hose to fittings and to the tooling in the ProCrimp® 1380 make hose assembly simpler than ever. Decals have been prepared to fit the ProCrimp® 1380 with all of the MatchMate Plus hose styles, including MatchMate BLUE.® ­

Benefits

A S S E M B ILNYT R EO QD UU I PCMTEI O NN T

ASSEMBLY EQUIPMENT (CONT.)

*Teflon is a registered trademark of DuPont and under license by Eaton.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

42 43

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ASSEMBLY INSTRUCTIONS

To determine the “J” length (cut length of hose) from “L” length (overall length), deduct “D” dimensions of both end fittings. Consult fitting information tables for “D” dimensions.

L

L

L

O

L

= verall ength J = Cut ength of Hose D = Fitting ength

AQP® Racing Hose (with Reusable Fittings)

Step 4. Lubricate inside of hose and nipple threads liberally using S.A.E. 30 lubricating oil or Aeroquip FBM3553 Hose Assembly Lube. ­

Step 3. Important—Mark position around hose at rear of socket with a grease pencil, paint or tape.

­

Step 2. Insert hose in socket with twisting, pushing motion until hose is in line with back of socket threads.

­

Step 1. Cut hose square to length with fine-tooth hack saw or cut-off wheel. To minimize wire braid flare out, wrap hose with masking tape and cut through tape. Remove tape before next step.

L

M

FB 3553 Hose Assembly ube

proof

all

operating

inspect

and

twice

to

test

lean

Step 7. Important—Check hose for pushout by observing hose position mark. Pushout should not be evident. C , pressure

Step 6. Complete assembly using wrench while continuing to hold hose in position. Maximum allowable gap is .031 inches.

Your thumbnail is a convenient measuring device.

. Disassemble in reverse order. assemblies

Step 5. Carefully insert nipple and engage nipple and socket threads while holding hose in position with other hand.

Make sure hose does not push out of socket by observing mark made in Step 3.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

NN STRUCTIONS IANSTSREOMDBULCYT I O

How To Determine Hose Assembly Lengths

Eaton’s Aeroquip Performance Products Hose Assembly Lube is a specially compounded lubricant superior to any other lubricant used in hose assembly work.

Available in pint containers.

Use for either hand or machine assembly.

44 43

StartLite® Racing Hose and AQP® Racing Hose (with Lightweight Crimp Fittings) achine

Crimp Diameter easurement ocations Diameter measurements are to be taken at the center (top to bottom, side to side) of the specified fitting selection.

M

The ProCrimp 1380 machine is designed to assemble StartLite and AQP® Racing Hose assemblies. It is electronically controlled to give fast, accurate crimps and incorporates programmable crimp settings and a simple die cage insertion to reduce setup time and errors.

T

P

roCrimp® 1380 arget Settings

The target settings for Eaton’s Aeroquip Performance Products crimp machines are provided to aid in establishing actual settings. While the settings on this chart will give crimp diameters close to, or at, specified value, the machine operator must check to verify the actual diameter. Before using these target settings, the crimp machine must be within proper calibration.

If needed, consult your Eaton Aeroquip Performance Products equipment manual for calibration procedures. e

s

Mach

in

-M120 -M150 -M150 -M210 -M240 -M280 -M370

.493 .614 .719 .896 1.020 1.205 1.465

Crimp Diameter (±.005 Inches)

Die Cage

Hose Dash Size

e

e

Target Setting

­

Measurement 1 + Measurement 2 + Measurement 3 + Measurement 4 Crimp = Diameter 4

Note: It is recommended that all hose assemblies be proof pressure checked at twice the operating pressure using a proof test stand such as the Eaton’s Aeroquip Performance Products FT1058 stand.

To ensure a proper crimp, the StartLite and AQP Racing Hose (FBU & FBA) must have a clean cut with no frayed ends and must be fully inserted into the fitting. Position your scribe line level with the top of the die. Follow target setting for the size of hose to be crimped. Check your crimp diameter with a dial caliper.

Determining Crimp Diameter The crimp diameter is the average of the four diameter measurements around the fitting. These measurements are to be taken at the same relative locations indicated in the illustration above right.

088 078 187 142 116 155 040

INCHES

-04 -06 -08 -10 -12 -16 -20

Ta

P

roCrimp 1380 Crimp rg t S tting

L

M

P

roCrimp® 1380 Crimp

StartLite® Racing Hose (with Reusable Fittings)

� To disassemble, reverse steps. � It is recommended that all hose assemblies be proof pressure checked at twice the operating pressure using a proof test stand such as the Aeroquip Performance Products FT1058 stand.

Step 5. Complete assembly using wrench while continuing to hold hose in position.

Maximum allowable gap is .031 inches. Your thumbnail is a convenient measuring device. Do not overtighten to a point where there is no gap.

FB 3553 Hose Assembly ube Aeroquip Performance Products Hose Assembly Lube is a specially compounded lubricant superior to any other lubricant used in hose assembly work.

Available in pint containers.

Use for either hand or machine assembly.

R

Start ite® Hose outing rocedure L

� Greater resistance can be expected as compared to Aeroquip Performance Products AQP® Racing Hose.

Step 4. Carefully insert nipple and engage nipple and socket threads while holding hose in position with other hand.

Make sure hose does not push out of socket.

P

otes:

Step 3. Lubricate inside of hose and nipple threads liberally using S.A.E. 30 lubricating oil or Aeroquip Performance Products FBM3553 Hose Assembly Lube. and socket threads while holding hose in position with other hand. Make sure hose does not push out of socket.

L

Step 2. Insert hose in socket with twisting, pushing motion until hose is in line with back of socket threads.

N

Step 1. Cut hose square to length with Aeroquip Performance Products Cut Off Tool (FT1258) or similar cutting device.

M

A S S E M B L Y IIN NTSRTO RD UU CC T ITOI O NN S

ASSEMBLY INSTRUCTIONS (CONT.)

In most vibration applications, it may be necessary to restrain, protect, or guide the hose to protect it from damage caused by unnecessary flexing or contact with other mechanical components. Care must be taken to ensure such restraints do not introduce additional stress or wear points. StartLite® hose, when used with reusable fittings in a high vibration applications, should be supported approximately every 12 to 14 inches.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

44 45

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ASSEMBLY INSTRUCTIONS (CONT.)

Firesleeve

­

­

­

­

Step 1. Follow the appropriate hose assembly instructions through the assembly of one end fitting. Cut firesleeve to same length as hose. Start firesleeve over cut end of hose. ­

Step 2. Push hose on fitting until hose end bottoms underneath protective cap as shown.

Clean, proof test to twice operating pressure and inspect all assemblies.

ote: If applying sleeve over Teflon* or stripped cover assemblies, wrap exposed wire with tape. Grasp sleeve and slip over the hose assembly as illustrated.

N

Step 1. Cut hose to required length with a sharp knife.

Oil inside of hose and outside of nipple liberally.

1Never use a hose clamp with FBV SOCKETLESS.™

Pro Clamp™

Step 1. Slide clamp onto hose.

Step 2. Push cap (socket) onto hose until it bottoms. Then slide clamp under cap.

Step 3. Push assembly onto beaded tube. Position clamp for appearance. Tighten with a screwdriver.

Step 2. Stretch until snug, mark length and cut with tin snips.

Step 3. Reconnect radiator hose and secure hose and overbraid with clamp or ProClamp clamp.

Overbraid

­

­

­

Step 1. Disconnect the radi ator hose. Slide overbraid over the radiator hose.

A

A

B

B

Step 2. Skin sleeve back from cut end of hose enough to allow assembly of second end fitting. (2A) Then center sleeve so that it completely covers both sockets. (2B) Step 3. Position nylon wire tie or band clamp over sleeve on each end of the hose assembly and draw tight.

NN STRUCTIONS IANSTSREOMDBULCYT I O

SOCKETLESS™ Hose1

*Teflon is a DuPont trademark.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

46 45

AQP® High Pressure Hose (Power Steering)

Step 1. Cut hose square with fine-tooth hacksaw or cut-off wheel.

Step 2. Put socket in vise.

Screw hose counterclockwise into socket until it bottoms.

When assembling long lengths of hose, it may be preferred to put hose in vise just tight enough to prevent from turning, and screw socket onto the hose counterclockwise until it bottoms. Back off 1⁄4 turn.

Step 3. Male Ends: Push assembly tool into nipple.

Swivel Ends: Tighten nipple and nut on assembly tool.

Lubricate nipple, mandrel and inside of hose liberally with Aeroquip Performance Products assembly lube.

ote: It is recommended that all hose assemblies be proof pressure checked at twice the operating pressure using a proof test stand such as the Aeroquip Performance Products FT1058 stand.

Step 4. Male Ends: Screw nipple clockwise into socket and hose. Leave a 1⁄32∀ clearance between nipple hex and socket.

Swivel Ends: Screw nipple clockwise into socket and hose. Leave 1⁄32∀ to 1⁄16∀ clearance between nut and socket. Clean, proof test to twice operating pressure and inspect all assemblies.

N

To disassemble: Reverse steps.

Racing Hose, Teflon* with Reusable Fitting

to

test

proof

inspect

and

operating pressure

twice

lean

Step 4. Wrench tighten hex until clearance with socket hex is at .031 inches. Your thumbnail is a convenient measuring device. Tighten further to align corners of nipple and socket hexes.

C , .

assemblies

all

Step 3. Lubricate nipple and socket threads. Use a molydisulfide base lubricant for stainless steel fittings (e.g.

Molykote Type G); lubricants containing chloride are not recommended. Other material combinations use standard petroleum lubricants. Hold the nipple with hex in the vise.

Push hose over nipple with twisting motion until seated against nipple chamfer. Push socket forward and start threading of socket to nipple.

To disassemble: Unscrew and remove nipple; slide socket back on hose by tapping against flat surface; remove sleeve with pliers. mportant: Fittings may be disassembled and reused at least once. However, all such fittings should be carefully examined for distortion, thread damage and I.D. dimensions. New sleeve is recommended upon reuse of fitting. ­

­

Sometimes wire braid hose will “neck down” on one end and “flare out” on the other end. This can be used to an advantage. Slip two sockets back to back over the “necked down” end of the hose, position approximately 3 inches from each end. Mount nipple hex in a vise. Work the hose bore over the nipple to size the tube and aid in separating the braid prior to fitting the sleeve. Remove hose from nipple.

Step 2. Push the sleeve over the end of the tube and under the wire braid by hand.

Complete positioning of the sleeve by pushing the hose end against a flat surface.

Visually inspect to see that the tube butts against the inside shoulder of the sleeve. Set the sleeve barbs into the Teflon* tube by pushing a round nose tapered punch into the end of the sleeve and tube.

I

Step 1. Cut hose square to length with fine-tooth hack saw or cut-off wheel. To minimize wire braid flare out, wrap hose with masking tape and cut through tape. Remove tape, trim loose wires and flush with lube before next step. Burrs on bore of tube should be removed with a knife. Clean the hose bore.

­

A S S E M B L Y IIN NTSRTO RD UU CC T ITOI O NN S

ASSEMBLY INSTRUCTIONS (CONT.)

Replacement brass sleeves are available. Refer to Page 15.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

46 47

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

ASSEMBLY INSTRUCTIONS (CONT.)

Step 1. Wrap a piece of tape around the hose twice and mark to the correct length for cutting. Using a cut-off saw, cut the hose through the tape where marked. This must be a clean, straight cut.

Step 2. Using a knife, remove any burrs or debris from the end of the hose. Clean the hose out thoroughly before assembling fittings.

Step 3. Once the hose is cut and cleaned, insert the hose through the socket (the threads should be facing in the direction that the nipple will be inserted).

Step 4. With the socket slid on the hose, remove the tape. Be sure to remove all of the tape. Use a knife if necessary.

on the inside of the sleeve. Be careful not to kink or damage the hose during this process.

If the hose is damaged, a new piece must be cut and used.

Step 5. Insert the FT1038A hose tool or fitting nipple gently into the end of the hose.

Step 6. Using a slow rotating motion, roll the hose tool or fitting nipple around inside the hose so that the braid separates from the tube as shown. Be careful not to stretch the tube out too much, or it will not fit into the sleeve in Step 7.

Step 7. Push the sleeve over the end of the blue tube and under the wire braid by hand.

Complete positioning of the sleeve by pushing the hose end against a flat surface. Visually inspect to see that the tube stock butts against the O-ring

Step 9. Insert the lubricated nipple into the hose.

Step 10. Use a rotating motion until the nipple has bottomed out into the sleeve. Be very careful not to kink or crush the hose.

Step 11. With the nipple fully inserted, slide the socket back up the hose to the nipple threads.

Step 13. Using a wrench, tighten the nipple the rest of the way onto the socket.

It is ok if the hose rotates during this process. Be careful not to over-tighten the threads, this could cause stripping.

Step 14. Repeat Steps 2 thru 13 to complete the other end of hose assembly. Once assembled, remove any contaminants from the hose before installing it into the A/C system.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

Step 8. Lubricate the nipple with refrigerant oil.

Step 12. Hand tighten the socket to the nipple.

NN STRUCTIONS IANSTSREOMDBULCYT I O

A/C Hose and Fittings

48 47

Actual Fitting Sizes s

N

Fitting

eads

r

Th

ip

e

SAE 37° A

P

I NHTNRI O N TEC CD AU L CDTAI O TA

TECHNICAL DATA

“Dash” Size/Fractional Equivalent Guide

sizes. Dash sizes are the numerators of fractions with a denominator of 16.

For example, -08 is equal to 8⁄16 which is equal to 1⁄2.

ui

de

G

e

a

q

a

ac

e

ash

tion l E uiv l nt

Nominal Fractional Equivalent

INCHES

-12 -14 -16 -20 -24 -32

de

e

a

q

Siz /Fr

1⁄8 3⁄16 1⁄4 5⁄16 3⁄8 1⁄2 5⁄8

D

S.A.E. 37° (AN) Dash Size

INCHES

-02 -03 -04 -05 -06 -08 -10

ui

Nominal Fractional Equivalent

tion l E uiv l nt a

ac

e

Siz /Fr

ash

D

S.A.E. 37° (AN) Dash Size

G

The following chart gives fractional equivalents to hose and fitting dash

3⁄4 7⁄8 1 1 1⁄4 1 1⁄2 2

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

48 49

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

TECHNICAL DATA (CONT.)

The following chart is intended as a quick reference guide for thread size by dash size.

3⁄4-14

3⁄4-14

1 11-1⁄2 1 1⁄4-11 1⁄2 1 1⁄2-11 1⁄2 2 11-1⁄2

1 11-1⁄2 1 1⁄4-11 1⁄2 1 1⁄2-11 1⁄2 2 11-1⁄2

3⁄4-16 7⁄8-14 1 1⁄16-12 1 3⁄16-12 1 5⁄16-12 1 5⁄8-12 1 7⁄8-12 2 1⁄2-12

3⁄4-16 7⁄8-14 1 1⁄16-12 1 3⁄16-12 1 5⁄16-12 1 5⁄8-12 1 7⁄8-12 2 1⁄2-12

1⁄2-14

1⁄2-14

3⁄8-18

5⁄16-24 3⁄8-24 7⁄16-20 1⁄2-20 9⁄16-18

3⁄8-18

5⁄16-24 3⁄8-24 7⁄16-20 1⁄2-20 9⁄16-18

S.A.E. Inverted Flare

1⁄4-18

P.T.T. 30° Automotive

1⁄4-18

5⁄16-24 3⁄8-24 7⁄16-20 1⁄2-20 5⁄8-18 11⁄16-24 3⁄4-16 7⁄8-14 1 1⁄16-14

S.A.E. O-ring Boss

1⁄8-27

SAE 37° AN

1⁄8-27

SAE 45° Automotive Refrigeration

N.P.T.F.

N.P.S.M. Approximate Diameter

Dash Size

1⁄2 5⁄8 3⁄4

1 1 1⁄4 1 1⁄2 2

Fl r a

ed

S.A.E. nv rt

e

ed

Female Half

e

Male Half

e

.12 .17 .23 .30 .39 .48 .61 .84 1.08 1.31 1.78

Fu l)

Tapered

Thread Thread O.D. I.D.

S.A.E. 37°

I

-03 -04 -05 -06 -08 -10 E -12 Through -16 Hole -20 -24 -32

e

Tapered

Hol

Dash Size

p r

Ta­

e

P

tion l ip ­a

F(

Na­

NPT

1 5⁄16-14 1 5⁄8-14 1 7⁄8-14 2 1⁄2-12

e

42°

Thread O.D.

45° Thread Thread 42° O.D. O.D. Male Half

Female Half

S.A.E. 45° 45° 45° Thread Thread I.D. O.D.

Male Half

Female Half

S.A.E. 37° (A ) N

h

1⁄8 3⁄16 1⁄4 5⁄16 3⁄8

Common Thread Connections

h

E t roug S.A.E. 37°

Through Hole Dimensions

All dimensions are nominal. In jump size bodies, minimum through hole dimensions will correspond to the smallest dash size.

5⁄16-24 3⁄8-24 7⁄16-24 1⁄2-20 5⁄8-18 1 1⁄16-18 3⁄4-18 7⁄8-18 1 1⁄16-16

INCHES

-02 -03 -04 -05 -06 -07 -08 -10 -12 -14 -16 -20 -24 -32

Tubing O.D. Size

ITNETCRHONDI C UA CL T ID OA NT A

Thread Size Chart

37° 37° Thread Thread O.D. I.D.

Male Half

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

Female Half

50 49

Torque Specifications for Aluminum Fittings e

n

d O

h

t o

Me

e

h

ig t ning

T

e

a

e

Alt rn t

Number of Flats ethod Hex Flats Size Rotations Here are the steps for an -04 1 1⁄2 to 1 3⁄4 excellent method of tight-06 1 to 1 1⁄2 ening. Anyone can tell if -08 1 1⁄4 to 1 3⁄4 the joint was tightened -10 1 1⁄4 to 1 3⁄4 and how much.

-12 1 to 1 1⁄2 1. Tighten the nut by hand 3⁄4 to 1 until it bottoms the seats. -16 -20 1⁄2 to 3⁄4 2. Using a marker, draw a -24 1⁄2 to 3⁄4 line lengthwise on the nut and extend it onto the adapter.

3. Using a wrench, rotate the nut to tighten. Turn the nut the amount shown on the chart.

Maximum Torque1

50 70 100 130 150 270 360 460 700 850 900 1800

80 105 140 180 195 350 430 550 840 1020 1080 2000

Mark a line on the nut and adapter before torquing.

T

Alternate ightening ethod wo The second alternate method of tightening is very simple and easy to remember. Bring the nut to hand tight and then rotate a quarter of a turn. This applies to all sizes. Mark the fitting as indicated in the flat method to confirm the quarter turn.

R

P

There may be times when the correct torque wrench may not be available. In these cases you can follow one of the alternate tightening methods listed at right. lease note that these methods are for aluminum performance fittings and adapters. emember, overtightening will result in possible damage to the fitting, resulting in possible leaks.

Misalignment of the mark shows the amount which the nut was tightened.

M

1Torque values are shown in inch pounds for aluminum fittings.

T

-02 -03 -04 -05 -06 -08 -10 -12 -16 -20 -24 -32

Minimum Torque1

es

lin

de

ui

G

tion

ca

f

ec

i i

Nut Size

e

or u Sp q

T

M

One of the most frequently asked questions is how tight should the connection between the fitting and the adapter be?

The correct answer is to follow the specification guidelines listed below. This will give the proper tightness to allow for a good seal, but prevents damage to the fitting by over torque.

I NHTNRI O N TEC CD AU L CDTAI O TA

TECHNICAL DATA (CONT.)

e

0.06804 Atmospheres 1.8

Temp. (°F) -32 Temp. (°C)

453.5924 Grams 0.1198 Gallons

0.02957 Liters

Miles/hour Ounces Ounces Ounces (fluid) Ounces (fluid) Pounds Pounds of water Pounds/ square inch Temp. (°C)

Gallons Feet Inches Meters Feet Kilometers Kilometers/ hour 0.8684 Knots 0.0625 Pounds 28.34952 Grams 1.805 Cubic inches

To Obtain

0.2642 3.281 39.37 10-6 5280 1.609 1.609

By

Liters Meters Meters Microns Miles Miles Miles/hour

Multiply

+32 Temp. (°F) 5/9

f Meas

Pounds/ square inch Atmospheres 1.013 Bars Bars 0.9869 Atmospheres Bars 14.50 Pounds/ square inch Centimeters 0.3937 Inches Feet 0.3048 Meters Gallons 231 Cubic inches Gallons 3.785 Liters Gallons 1.20105 U.S. gallons (Imperial) Gallons 0.83267 Imperial (U.S.) gallons Gallons 8.3453 Pounds of (water) water Gallons/ 8.0208 Cubic minute feet/hour Horsepower 745.7 Watts Inches of 1.133 Feet of water mercury Kilometers 0.6214 Miles Liters 0.03531 Cubic feet Liters 61.02 Cubic inches

Atmospheres 14.70

5.556 5.953 6.350 6.747 7.144 7.541 7.938 8.334 8.731 9.128 9.525 9.922 10.319

ur

To Obtain

.219 .234 .250 .266 .281 .297 .313 .328 .344 .359 .375 .391 .406

.397 .794 1.191 1.588 1.984 2.381 2.778 3.175 3.572 3.969 4.366 4.763 5.159

.016 .031 .047 .063 .078 .094 .109 .125 .141 .156 .172 .188 .203

nit o

By

Multiply

s

e

7/32 15/64 1/4 17/64 9/32 19/64 15/16 21/64 11/32 23/64 3/8 25/64 13/32

1/64 1/32 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64

Inches Inches Millimeters Fractions Decimals Decimals

Inches Inches Millimeters Fractions Decimals Decimals

U

Conv rting

s

e

a

q

e

illim t r E uiv l nt e

M

n

d

a

n

ch

I

Conversion Tables

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

50 51

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

TECHNICAL DATA (CONT.)

Under pressure, a hose may change in length. Always provide some slack in the hose to allow for this shortening or elongation. (However, excessive slack in hose lines may cause poor appearance.)

If a hose is installed with a twist in it, operating pressures tend to force it straight. This can loosen the fitting nut. Twisting can cause reinforcement separation, and the hose could burst at the point of strain.

At bends, provide sufficient hose so that it does not have a bend radius less than its recommended minimum bend radius. Too tight a bend may kink the hose and restrict or stop the fluid flow.

In many cases, the proper use of adapters and hose fittings can eliminate tight bends or kinks.

In applications where there is considerable vibration or flexing, allow additional hose length. Metal hose fittings, of course, are not flexible, and proper installation protects metal parts from undue stress and avoids kinks in the hose.

When hose lines pass near an exhaust manifold or other heat source, they should be insulated by a heat resistant boot, firesleeve or a metal baffle. In any application, brackets and clamps keep hose in place and reduce abrasion. For installations where abrasion to the hose cover cannot be prevented with the use of clamps or brackets, a steel protective coil or abrasion resistant sleeve should be placed over the hose.

ITNETCRHONDI C UA CL T ID OA NT A

Hose Routing and Installation

When 90° adapters were used, this assembly became neaterlooking and easier to inspect and maintain. It uses less hose, too!

Hose Maintenance

Maintenance Hose assemblies in operation should be inspected frequently for leakage, kinking, abrasion, corrosion or any other signs of wear or damage. Worn or damaged hose assemblies should be replaced immediately.

Cleaning Clean assembly by blowing out with clean compressed air. Assemblies may be rinsed out with mineral spirits if the tube stock is

compatible with oil; otherwise, hot water at +150°F maximum may be used.

Consult Eaton for special cleaning equipment.

Inspection Examine hose assembly internally for cut or bulged tube, obstructions and cleanliness. For segment style fittings, be sure the hose butts up against the nipple shoulder, band and retaining ring are properly set and tight, and segments are properly spaced. Check

for proper gap between nut and socket or hex and socket. Nuts should swivel freely. Check the layline of the hose to be sure the assembly is not twisted.

Cap the ends of the hose with plastic covers to keep them clean.

Hydrostatic Proof Testing The hose assembly should be hydrostatically tested at twice the recommended working pressure of the hose. Test pressure should be held for not more than

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

one minute and not less than 30 seconds. When test pressure is reached, visually inspect hose assembly for any leaks or signs of weakness and any movement of the hose fitting in relation to the hose. Any of these defects are cause for rejection.

Caution Testing should be conducted in approved test stands with adequate guards to protect the operator.

52 51

I NHTNRI O N TEC CD AU L CDTAI O TA

TECHNICAL DATA (CONT.) AQPÂŽ Racing Hose System Schematics Typical Fuel System Connection Schematic

Typical Fuel System Schematic Firewall Bulkhead

AQP Racing Hose

AQP Racing Hose Fuel Pump

AQP Racing Hose

AQP Racing Hose

AQP Racing Hose

Pressure Gauge

Fuel Tank

Typical Oil Cooler Schematic

Typical Transmission or Axle Cooler Schematic Axle or Transmission

AQP Racing Hose

Typical Pressure Gauge Schematic Bulkhead

Oil Pressure Gauge

Typical Radiator and Heater Schematic

AQP Racing Hose

Heater

AQP Racing Hose

Pro-Clamp

Bulkhead

AQP Racing Hose

AQP Racing Hose

Pump AQP Racing Hose

Overbraid

Pro-Clamp

Bulkhead

Radiator

AQP Racing Hose

AQP Racing Hose Braze port to 1/2" tube

Pro-Clamp

AQP Racing Hose

Overbraid

To Engine Block Pro-Clamp

Oil Cooler

Racing Hose, Teflon* System Schematics Typical Brake System Connection Schematic

Radiator

TFE Racing Hose Brake Cylinder

Bulkhead

Brake Cylinder

Bulkhead

TFE Racing Hose

TFE Racing Hose

Adapter

Adapter

TFE Racing Hose

Engine

To Master Cylinder Adapter Firewall

*Teflon is a registered trademark of Dupont and under license by Eaton.

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

52 53

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

TECHNICAL DATA (CONT.)

This chart is provided as an aid for determining correct hose sizes.

Example At 13 U.S. gallons per minute, what is the proper hose size within the suggested velocity range for pressure lines?

Solution Locate 13 U.S. gallons per minute in the left-hand column and 10 feet per second in the right-hand column (the center of the suggested velocity range for pressure lines). Lay a straightedge across the two points. The inside diameter is shown in the center column nearest the straightedge.

For suction hose, follow the same procedure except use suggested velocity range for pump inlet lines in the right-hand column.

Based on Formula G.P.M. x 0.3208 AREA (SQ. IN.) = VELOCITY (FT./SEC.)

ITNETCRHONDI C UA CL T ID OA NT A

Flow Capacities of Hose Assemblies at Suggested Flow Velocities

Conversion Factors � To convert U.S. gallons into Imperial gallons, multiply U.S. gallons by 0.83267. � To convert Imperial gallons into U.S. gallons, multiply Imperial gallons by 1.20105. � To convert U.S. gallons into liters, multiply U.S. gallons by 3.785. � To convert liters into U.S. gallons, multiply liters by 0.2642.

*Suggestions are for oils having a maximum viscosity of 315 S.S.U. at +100°F (+38°C) and operating at temperatures between +65°F and +155°F (+54°C to +69°C). Under certain conditions, velocities in pressure lines can be increased up to 25 feet per second. Contact Eaton with specific information on your application.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

54 53

T

R

­

R

­

­

IMPORTANT

I

I

Hose Assembly nspection Hose assemblies in service should be inspected frequently for leakage, kinking, corrosion, abrasion or any other signs of wear or damage. Hose assemblies that are worn or damaged should be removed from service and replaced immediately.

A Caution about Fuel njection All hose listed in this catalog is suitable for use with leaded and unleaded fuels. However, caution must be used in fuel injection systems that recirculate fuel.

This causes fuel to oxidize which can attack the hose inner tube. To increase service life, keep the time of exposure to the oxidized fuel to a minimum. Drain hose line or flush with original fuel or other suitable material.

­­

T

O

P

P

Ambient emperatures Very high or low ambient (outside of hose) temperatures will affect cover and reinforcement materials, thus reducing the life of the hose.

Ambient temperatures in conjunction with internal temperatures are also an important factor. For specific recommendations, please consult Eaton.

Bend adius Recommended minimum bend radii are based on maximum operating pressures with no flexing of the hose. Safe operating pressure decreases when bend radius is reduced below the recommended minimum. Flexing the hose to less than the specified minimum bend radius will reduce hose life.

Chemical esistance Consider the chemical resistance of the fitting, O-ring, hose cover and tube stock. Covers are resistant to mildew, cleaning solvents, oils and fuels. acuum Service Maximum negative pressures shown for hose -16 and larger are suitable only for hose that has suffered no external damage or kinking. If greater negative pressures are required for -16 and larger hose, the use of an internal support coil is recommended.

V

P

­

O

L

Service ife Factors Hose assemblies, like other products, have a finite service life. The actual service life of a given hose assembly in a given application is dependent on many variable factors, including the following: perating ressure Eaton’s Aeroquip Performance Products hose assemblies are rated for continuous operation at the maximum operating pressure specified for the hose.

Generally, the operating pressure is one fourth the hose minimum burst pressure. ressure Surges Almost all hydraulic systems develop pressure surges which may exceed relief valve settings. Exposing the hose to surge pressure above the maximum operating pressure will shorten hose life and must be considered. A surge (rapid and transient rise in pressure) will not be indicated on many common pressure gauges but can be measured using electronic measuring devices. In systems where surges are severe, select a hose with a higher maximum operating pressure.

Burst ressure These are test values only and apply to hose assemblies that have not been used and have been assembled for less than 30 days.

High ressure High pressure gaseous systems especially over 250 psi are very hazardous and should be adequately protected from external shock and mechanical or chemical damage. They should also be suitably protected to prevent whiplash action in the event of failure. perating emperatures Operating temperatures specified refer to the maximum temperature of the fluid or gas being conveyed. High heat conditions may have an adverse effect on hoses due to degradation of the rubber which will limit hose usefulness and reduce fitting retention. In some cases, the fluid being conveyed will slow down this degradation, whereas other fluids may accelerate it Therefore, the maximum temperature of each hose does not apply to all fluids or gases. Continuous use at maximum temperatures together with maximum pressures should always be avoided. Continuous use at or near the maximum temperature rating will cause a deterioration of physical properties of the tube and cover of most hose. This deterioration will reduce the service life of the hose.

P

I NHTNRI O N TEC CD AU L CDTAI O TA

TECHNICAL DATA (CONT.)

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

54 55

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

PLAN-O-GRAMS

FF13333

INV

E

NTORY

The 29x49 Plan-O-Gram comes complete with all of the inventory, signage and support material needed to get you on the fast track of selling the hose and fitting line that has been the professionals’ choice for over 60 years.

Part Number

Description

Qty.

FCM1012

-6 Strt Reus Fitting

2

FCM1013

-8 Strt Reus Fitting

2

FCM4025

-12 45° Reus Fitting

2

FCM4022

-6 45° Reus Fitting

2

FCM4023

-8 45° Strt Reus Fitting

2

FCM4035

-12 90° Reus Fitting

2

FCM4032

-6 90° Reus Fitting

2

FCM4033

-8 90° Strt Reus Fitting

2

FCM2010

FStrt -12 AN to -1/2 Pipe

2

FCM4042

-6 120° Reus Fitting

2

FCM2007

Strt -8 AN to -3/8 Pipe

2

FCM2017

F90° -12 AN to -1/2 Pipe

2

FCM2002

Strt -4 AN to 1/4 Pipe

2

FCM4037

-8 AN to -3/8 Pipe

2

FCM3671

Allen Plug 1/29 Pipe

2

FCM2006

Strt -6 AN to -3/8 Pipe

2

FCM2110

Carb -8 AN to 7/8-20

2

FCM3675

Tube Nut -6

2

FCM2022

45° -6 AN to -1/4 Pipe

2

FCM1014

-10 Strt Reus Fitting

2

FCM3676

Tube Sleeve -6

2

FCM2035

90° -6 AN to -3/8 Pipe

2

FCM4024

-10 45° Reus Fitting

2

FCM3672

Tube Sleeve -8

2

FCM2114

Carb -6 AN to 7/8-20

2

FCM4034

-10 90° Reus Fitting

2

FCA0606

-6 AQP Racing Hose (69)

2

FCM2111

Fuel -6 to 1/2-20 Inv. Flare

2

FCM2010

Strt -10 AN to 1/2 Pipe

2

FCA0803

-8 AQP Racing Hose (39)

2

FCM2052

Flare Union -6 AN/-6 AN

2

FCM2039

90° -10 AN to -1/2 Pipe

2

FCA0806

-8 AQP Racing Hose (69)

2

FCM3749

Allen Plug 1/29 Pipe

2

FCM1015

-12 Strt Reus Fitting

2

FF13365

Merchandiser

1

Qty.

Description

Part Number

Qty.

Description

Part Number

Nickel-Plated Products FF14619

INV

E

NTORY

The 29x29 Nickel-Plated Fitting and SOCKETLESS™ Hose Plan-O-Gram comes complete with all of the inventory, signage and support material needed to get you on the fast track of selling the hose and fitting line that has been the professionals’ choice for over 60 years.

MN S IPNL TARNO- O D -UGCRTAI O

Traditional Performance Products

Part Number

Description

Qty.

FCE1512

-6 Strt Sktls Fitting

2

FCE1533

-8 90° Stkls Fitting

2

FCE2035

-6 90° Adapter

2

FCE1513

-8 Strt Sktls Fitting

2

FCE1534

-10 90° Sktls Fittin

2

FCE2037

-8 90° Adapter

2

FCE1514

-10 Strt Sktls Fitting

2

FCE2005

-6 AN to Pipe Adapter

2

FCE2039

-10 90° Adapter

2

FCE1522

-6 45° Sktls Fitting

2

FCE2007

-8 AN to Piper Adapter

2

FCN0615

-6 Sktls Hose

159

FCE1523

-8 45° Sktls Fitting

2

FCE2010

-10 AN to Pipe Adapter

2

FCN0815

-8 Sktls Hose

159

FCE1524

-10 45° Sktls Fitting

2

FCE2022

-6 45° Adapter

2

FCN1015

-10 Sktls Hose

159

FCE1532

-6 90° Sktls Fitting

2

FCE2023

-8 45° Adapter

2

FF13365

Merchandiser

1

Qty.

Description

Part Number

Qty.

Description

Part Number

A/C Hose Products FF13565

INV

E

NTORY

The 29x29 A/C Fitting and Hose Plan-O-Gram comes complete with all of the inventory, signage and support material needed to get you on the fast track of selling the hose and fitting line that has been the professionals’ choice for over 60 years.

Part Number

Description

Qty.

FCE1712

-6 Strt Reus Fitting

2

FCE1724

-10 45° Reus Fitting

2

FCM3417

-8 Refrigerant O-rings

2

FCE1713

-8 Strt Reus Fitting

2

FCE1732

-6 90° Reus Fitting

2

FCM3418

-10 Refrigerant O-rings

2

FCE1714

-10 Strt Reus Fitting

2

FCE1733

-8 90° Reus Fitting

2

FCF0603

-6 A/C Hose (39)

2

FCE1722

-6 45° Strt Reus Fitting

2

FCE1734

-10 90° Reus Fitting

2

FCF0803

-8 A/C Hose (39)

2

FCE1723

-8 45° Strt Reus Fitting

2

FCM3416

-6 Refrigerant O-rings

2

FCF1003

-10 A/C Hose (39)

2

Qty.

Description

Part Number

Qty.

Description

Part Number

Stand-Alone Merchandising Kit (Make Your Own) FF13365

• “Aeroquip Performance Products Sold Here” cling-on window decal • Header card for Plan-O-Gram • Aeroquip Performance Products 29x59 banner

• 35 Reorder tags

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

56 55

Page 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 10 10

41 37 37 37 37 37 37 37 37 37 37 37 37 37 37 8 8 8 8 9 9 9 9 9 9 9 10 7 7 8 8 7

FBM4254 FBM4255 FBM4256 FBM4263 FBM4264 FBM4265 FBM4266 FBM4272 FBM4273 FBM4274 FBM4275 FBM4282 FBM4283 FBM4284 FBM4285 FBN0600 FBN0800 FBN1000 FBN1200 FBPA0300HA FBPA0345HA FBPA0390HA FBPA0400HA FBPA0445HA FBPA0490HA FBPC0300HA FBPC0400HA FBR1200 FBR2400 FBS0700 FBS0800 FBS0900

10 10 10 10 10 10 10 7 7 7 7 8 8 8 8 11 11 11 11 17 17 17 17 17 17 17 17 38 38 37 37 37

Part Number FBM4222 FBM4223 FBM4224 FBM4225 FBM4226 FBM4232 FBM4233 FBM4234 FBM4235 FBM4236 FBM4242 FBM4243 FBM4244 FBM4245 FBM4246 FBM4252 FBM4253

Page 12 12 12 12 12 36 36 36 36 36 36 36 38 38 38 41 41

Part Number FBM1441 FBM1442 FBM1443 FBM1444 FBM1445 FBM3011 FBM3012 FBM3013 FBM3015 FBM3016 FBM3113 FBM3114 FBM3412 FBM3413 FBM3414 FBM3553AE FBM3632AE

Page 16 16 16 36 12 12 12 12 12 12 12 12 12 12 12 12 12

FBM1389 FBM1392 FBM1394 FBM1438

18 18 18 12

FBM4212 FBM4213 FBM4214 FBM4215

7 7 7 7

FBS1000 FBS1100 FBS1200 FBS1300

37 37 37 37

FBM1439 FBM1440

12 12

FBM4216 FBM4217

7 7

FBS1400 FBS1600

37 37

FBM3646AE FBM3647 FBM3648 FBM3649 FBM3650 FBM3651 FBM3652 FBM3653 FBM3654 FBM3655 FBM3656 FBM3657 FBM3658 FBM3659 FBM3660 FBM4121 FBM4124 FBM4125 FBM4127 FBM4131 FBM4134 FBM4135 FBM4137 FBM4141 FBM4144 FBM4145 FBM4151 FBM4174 FBM4175 FBM4184 FBM4185 FBM4211

12 12 12 12 12 18 18 18 18 18 18 8 8 8 8 8 8 9 9 9 9 9 9 18 18 18 18 18 18 18 18 18

FBM1225 FBM1231 FBM1232 FBM1233 FBM1234 FBM1302 FBM1305 FBM1307 FBM1310 FBM1338 FBM1339 FBM1348 FBM1349 FBM1350 FBM1351 FBM1352 FBM1353 FBM1355 FBM1356 FBM1357 FBM1358 FBM1359 FBM1360 FBM1363 FBM1365 FBM1374 FBM1376 FBM1382 FBM1383 FBM1384 FBM1386 FBM1387

16 16

Part Number FBM1127 FBM1128 FBM1129 FBM1153 FBM1200 FBM1201 FBM1202 FBM1203 FBM1204 FBM1205 FBM1206 FBM1207 FBM1211 FBM1212 FBM1213 FBM1214 FBM1222

FBM1125 FBM1126

Page 43 43 6 6 6 6 6 6 6 6 6 15 15 15 15 13 13 13 18 18 18 18 11 11 11 11 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 35 35 35 35 35 35 16

Part Number ET1000AE ET1010AE FBA0400 FBA0600 FBA0800 FBA1000 FBA1200 FBA1600 FBA2000 FBA2400 FBA3200 FBC0300 FBC0400 FBC0600 FBC0800 FBF0600 FBF0800 FBF1000 FBG0600 FBG0800 FBG1000 FBG1200 FBL1512 FBL1513 FBL1514 FBL1515 FBL1522 FBL1523 FBL1524 FBL1525 FBL1532 FBL1533 FBL1534 FBL1535 FBL1542 FBL1543 FBL1544 FBL1545 FBL1552 FBL1553 FBL1554 FBL1555 FBL1562 FBL1563 FBL1564 FBL1565 FBM1073 FBM1074 FBM1115 FBM1116 FBM1117 FBM1118 FBM1124

I NUTMRBOEDRU ICNTDI O N PART N EX

PART NUMBER INDEX

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

56 57

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

Part Number FCE2060 FCE2061 FCE2063 FCE2064 FCE2071 FCE2072 FCE2073 FCE2074 FCE2075 FCE2076 FCE2077 FCE2081 FCE2082 FCE2083 FCE2084 FCE2099 FCE2100

Page 14 14 14 14 14 14 14 14 14 14 14 19 19 19 19 19 19

Part Number FCE1812 FCE1813 FCE1814 FCE1832 FCE1833 FCE1834 FCE1893 FCE1894 FCE1912 FCE1913 FCE1914 FCE2000 FCE2001 FCE2002 FCE2003 FCE2004 FCE2005

Page 6 6 6 6 6 6 6 6 15 15 15 15 15 15 15 15 15

Page 28 28 28 28 26 26 26 26 26 26 26 26 26 26 26 27 27

19 19 19 19 19 19 19 19 18 19 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 21 21 21

FCE2103 FCE2104 FCE2105 FCE2106 FCE2107 FCE2110 FCE2112 FCE2113 FCE2114 FCE2116 FCE2120 FCE2121 FCE2122 FCE2129 FCE2130 FCE2132 FCE2133 FCE2134 FCE2135 FCE2136 FCE2137 FCE2138 FCE2139 FCE2140 FCE2141 FCE2142 FCE2147 FCE2150 FCE2158 FCE2160 FCE2162 FCE2163

27 27 27 27 33 33 33 33 33 33 22 28 28 23 23 23 23 23 23 23 23 23 23 23 23 23 23 29 21 21 21 21

14 14 14 14

FCE2051 FCE2052 FCE2053 FCE2054

21 21 21 21

FCE2166 FCE2167 FCE2170 FCE2179

21 21 21 32

14 14

FCE2055 FCE2056

21 21

FCE2183 FCE2184

32 32

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

FCE2006 FCE2007 FCE2008 FCE2009 FCE2010 FCE2011 FCE2012 FCE2013 FCE2014 FCE2015 FCE2016 FCE2017 FCE2020 FCE2021 FCE2022 FCE2023 FCE2024 FCE2025 FCE2030 FCE2031 FCE2032 FCE2033 FCE2034 FCE2035 FCE2036 FCE2037 FCE2038 FCE2039 FCE2040 FCE2048 FCE2049 FCE2050

15 15 15 15 15 15 15 15 15 15 15 7 7 7 7 12 12 12 12 12 12 12 12 12 12 12 12 14 14 14 14 14

FCE1793 FCE1794

6 6

FCA2006 FCA2010

FCE1724 FCE1732 FCE1733 FCE1734

6 6 6 6

FCA1615 FCA1620 FCA1650 FCA2003

FCC0420 FCC0603 FCC0606 FCC0610 FCC0615 FCC0620 FCC0803 FCC0806 FCC0810 FCC0815 FCC0820 FCE1012 FCE1013 FCE1014 FCE1015 FCE1512 FCE1513 FCE1514 FCE1515 FCE1522 FCE1523 FCE1524 FCE1525 FCE1532 FCE1533 FCE1534 FCE1535 FCE1712 FCE1713 FCE1714 FCE1722 FCE1723

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

FCA0406 FCA0410 FCA0415 FCA0420 FCA0450 FCA0603 FCA0606 FCA0610 FCA0615 FCA0620 FCA0650 FCA0803 FCA0806 FCA0810 FCA0815 FCA0820 FCA0850 FCA1003 FCA1006 FCA1010 FCA1015 FCA1020 FCA1050 FCA1203 FCA1206 FCA1210 FCA1215 FCA1220 FCA1250 FCA1603 FCA1606 FCA1610

Part Number FCA2015 FCA2020 FCA2402 FCA2403 FCA2406 FCA3202 FCA3203 FCA3206 FCC0303 FCC0306 FCC0310 FCC0315 FCC0320 FCC0403 FCC0406 FCC0410 FCC0415

Page 37 37 37 37 6 6 6 6 6 6 6 11 11 11 11, 35 11 6

BIEORN I N D E X IPNATRRTO N D UM CT

Part Number FBS1800 FBS2000 FBS2200 FBS2400 FBU0400 FBU0600 FBU0800 FBU1000 FBU1200 FBU1600 FBU2000 FBV0400 FBV0600 FBV0800 FBV1000 FBV1200 FCA0403

PART NUMBER INDEX (CONT.)

58 57

Part Number FCM1151 FCM1155 FCM1343 FCM1344 FCM1345 FCM1512 FCM1513 FCM1514 FCM1515 FCM1522 FCM1523 FCM1524 FCM1525 FCM1532 FCM1533 FCM1534 FCM1535

Page 9 9 9 9 10 10 10 10 10 10 10 10 10 31 31 31 31

Part Number FCM1044 FCM1045 FCM1046 FCM1047 FCM1052 FCM1053 FCM1054 FCM1055 FCM1056 FCM1062 FCM1063 FCM1064 FCM1065 FCM1066 FCM1067 FCM1068 FCM1069

Page 11 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

Part Number FCL1515 FCL1522 FCL1523 FCL1524 FCL1525 FCL1532 FCL1533 FCL1534 FCL1535 FCL1542 FCL1543 FCL1544 FCL1545 FCL1552 FCL1553 FCL1554 FCL1555

Page 19, 31 22 18 22 33 25 25 25 33 33 25 26 26 27 25 25 25

Part Number FCE2185 FCE2186 FCE2187 FCE2190 FCE2192 FCE2240 FCE2243 FCE2246 FCE2247 FCE2248 FCE2263 FCE2769 FCE2799 FCE2815 FCE2953 FCE2954 FCE2955

Page 16 16 9 9 9 12 12 12 12 12 12 12 12 12 12 12 12

FCM1070 FCM1075 FCM1076 FCM1079 FCM1080 FCM1083 FCM1084 FCM1100 FCM1101 FCM1102 FCM1103 FCM1104 FCM1110 FCM1111 FCM1112 FCM1113 FCM1114 FCM1120 FCM1121 FCM1122 FCM1123 FCM1130 FCM1134 FCM1135 FCM1136 FCM1137 FCM1138 FCM1139 FCM1140 FCM1141 FCM1142 FCM1143

32 7 7 8 8 9 9 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

FCM1542 FCM1543 FCM1544 FCM1545 FCM1552 FCM1553 FCM1554 FCM1555 FCM1562 FCM1563 FCM1564 FCM1565 FCM2000 FCM2001 FCM2002 FCM2003 FCM2004 FCM2005 FCM2006 FCM2007 FCM2008 FCM2009 FCM2010 FCM2011 FCM2012 FCM2013 FCM2014 FCM2015 FCM2016 FCM2017 FCM2018 FCM2020

12 12 12 12 12 12 12 12 12 12 12 12 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 18 20 20 20 20

FCG1210 FCG1215 FCG1220 FCL1512

18 18 18 11

FCM1034 FCM1035 FCM1036 FCM1037

9 9 9 9

FCM1144 FCM1145 FCM1146 FCM1147

16 16 16 7

FCM2021 FCM2022 FCM2023 FCM2024

20 20 20 20

FCL1513 FCL1514

11 11

FCM1042 FCM1043

9 9

FCM1148 FCM1150

8 16

FCM2025 FCM2026

20 20

12 12 12 12 38 38 38 38 38 38 38 38 38 38 7 7 7 7 7 7 7 8 8 8 8 8 8 8 10 9 9 9

FCL1562 FCL1563 FCL1564 FCL1565 FCM1001 FCM1002 FCM1003 FCM1004 FCM1005 FCM1006 FCM1007 FCM1008 FCM1009 FCM1010 FCM1011 FCM1012 FCM1013 FCM1014 FCM1015 FCM1016 FCM1017 FCM1021 FCM1022 FCM1023 FCM1024 FCM1025 FCM1026 FCM1027 FCM1028 FCM1031 FCM1032 FCM1033

25 27 8 8 8 8 9 9 9 9 13 13 13 13 13 13 13 13 13 18 18 18 18 18 18 18 18 18 18 18 18 18

FCE2956 FCE3556 FCE4022 FCE4023 FCE4024 FCE4025 FCE4032 FCE4033 FCE4034 FCE4035 FCF0603 FCF0606 FCF0609 FCF0803 FCF0806 FCF0809 FCF1003 FCF1006 FCF1009 FCG0606 FCG0610 FCG0615 FCG0620 FCG0806 FCG0810 FCG0815 FCG0820 FCG1006 FCG1010 FCG1015 FCG1020 FCG1206

I NUTMRBOEDRU ICNTDI O N PART N EX

PART NUMBER INDEX (CONT.)

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

58 59

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

Part Number FCM2298 FCM2299 FCM2371 FCM2372 FCM2374 FCM2403 FCM2404 FCM2405 FCM2406 FCM2407 FCM2408 FCM2409 FCM2410 FCM2411 FCM2413 FCM2414 FCM2416

Page 29 29 32 32 27 31 31 32 32 19, 31 22 28 21 21 22 22 33

Part Number FCM2176 FCM2177 FCM2178 FCM2179 FCM2180 FCM2181 FCM2182 FCM2183 FCM2184 FCM2185 FCM2186 FCM2187 FCM2188 FCM2189 FCM2190 FCM2191 FCM2192

Page 31 33 31 33 33 33 33 27 27 22 22 28 28 28 28 28 28

Page 28 28 19 19 19 26 26 26 26 26 21 21 21 21 21 21 21

33 25 25 25 25 25 25 25 25 33 33 33 28 28 29 29 29 29 29 29 25 22 22 22 19 19 19 19 29 29 29 29

FCM2421 FCM2422 FCM2425 FCM2426 FCM2430 FCM2431 FCM2432 FCM2440 FCM2441 FCM2442 FCM2443 FCM2444 FCM2445 FCM2446 FCM2447 FCM2448 FCM2449 FCM2450 FCM2451 FCM2491 FCM2492 FCM2493 FCM2494 FCM2495 FCM2496 FCM2497 FCM2498 FCM2499 FCM2500 FCM2511 FCM2512 FCM2513

21 21 26 26 14 14 14 20 20 20 20 20 20 20 20 20 20 20 20 23 23 23 23 23 23 23 23 23 23 19 19 19

21 21 21 29

FCM2285 FCM2286 FCM2290 FCM2291

29 29 20 20

FCM2514 FCM2515 FCM2516 FCM2517

19 19 19 19

29 29

FCM2292 FCM2293

20 20

FCM2518 FCM2519

19 19

FCM2193 FCM2239 FCM2240 FCM2241 FCM2242 FCM2243 FCM2244 FCM2245 FCM2246 FCM2247 FCM2248 FCM2249 FCM2251 FCM2252 FCM2254 FCM2255 FCM2256 FCM2257 FCM2258 FCM2259 FCM2263 FCM2272 FCM2273 FCM2274 FCM2276 FCM2277 FCM2278 FCM2279 FCM2281 FCM2282 FCM2283 FCM2284

26 26 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 29 29 29 21 21 21 21 21 21

FCM2174 FCM2175

27 33

FCM2106 FCM2107

FCM2167 FCM2169 FCM2170 FCM2173

27 27 27 27

FCM2100 FCM2103 FCM2104 FCM2105

FCM2127 FCM2128 FCM2129 FCM2130 FCM2131 FCM2132 FCM2133 FCM2134 FCM2135 FCM2136 FCM2137 FCM2138 FCM2139 FCM2140 FCM2141 FCM2142 FCM2143 FCM2144 FCM2145 FCM2146 FCM2147 FCM2148 FCM2149 FCM2150 FCM2151 FCM2152 FCM2156 FCM2160 FCM2162 FCM2163 FCM2165 FCM2166

21 21 21 21 28 28 28 28 28 28 28 26 26 26 26 26 26 26 26 26 26 26 26 26 27 27 27 27 27 27 27 27

FCM2053 FCM2054 FCM2055 FCM2056 FCM2060 FCM2061 FCM2062 FCM2063 FCM2064 FCM2065 FCM2066 FCM2071 FCM2072 FCM2073 FCM2074 FCM2075 FCM2076 FCM2077 FCM2081 FCM2082 FCM2083 FCM2084 FCM2085 FCM2086 FCM2091 FCM2092 FCM2093 FCM2095 FCM2096 FCM2097 FCM2098 FCM2099

Part Number FCM2108 FCM2110 FCM2111 FCM2112 FCM2113 FCM2114 FCM2116 FCM2117 FCM2118 FCM2119 FCM2120 FCM2121 FCM2122 FCM2123 FCM2124 FCM2125 FCM2126

Page 20 20 20 20 20 20 20 20 20 20 20 20 21 21 21 21 21

BIEORN I N D E X IPNATRRTO N D UM CT

Part Number FCM2030 FCM2031 FCM2032 FCM2033 FCM2034 FCM2035 FCM2036 FCM2037 FCM2038 FCM2039 FCM2040 FCM2041 FCM2048 FCM2049 FCM2050 FCM2051 FCM2052

PART NUMBER INDEX (CONT.)

Bulk or Retail Packaged Parts FB-prefixed part numbers indicate bulk-packaged products. FC-prefixed part numbers indicate carded/clam shelled (retail-packaged) products.

Most products in this catalog can be ordered in either package style by changing the prefix accordingly.

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

60 59

Part Number FCM2802 FCM2803 FCM2804 FCM2805 FCM2806 FCM2807 FCM2808 FCM2809 FCM2811 FCM2812 FCM2813 FCM2814 FCM2815 FCM2816 FCM2817 FCM2818 FCM2819

Page 20 20 20 20 20 20 21 21 21 21 21 21 21 21 21 21 21

Part Number FCM2732 FCM2733 FCM2734 FCM2735 FCM2736 FCM2737 FCM2749 FCM2750 FCM2751 FCM2752 FCM2753 FCM2754 FCM2755 FCM2756 FCM2757 FCM2758 FCM2759

Page 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

Page 27 27 27 27 27 27 27 27 27 27 27 27 27 27 28 28 28

21 21 21 21 21 21 21 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 27 26 26 26 26 26 26 26

FCM2821 FCM2822 FCM2823 FCM2824 FCM2825 FCM2831 FCM2832 FCM2833 FCM2834 FCM2835 FCM2871 FCM2872 FCM2873 FCM2874 FCM2875 FCM2876 FCM2877 FCM2878 FCM2879 FCM2880 FCM2881 FCM2882 FCM2883 FCM2884 FCM2885 FCM2893 FCM2899 FCM2909 FCM2910 FCM2914 FCM2915 FCM2916

27 27 27 27 27 27 27 27 27 27 26 26 26 26 26 26 26 26 26 26 28 28 28 28 28 26 27 29 29 22 22 22

20 20 20 20

FCM2796 FCM2797 FCM2798 FCM2799

26 26 26 26

FCM2917 FCM2918 FCM2919 FCM2921

22 22 22 30

20 20

FCM2800 FCM2801

27 27

FCM2922 FCM2923

30 30

FCM2760 FCM2761 FCM2762 FCM2763 FCM2764 FCM2765 FCM2766 FCM2769 FCM2770 FCM2771 FCM2772 FCM2773 FCM2774 FCM2775 FCM2776 FCM2777 FCM2778 FCM2779 FCM2781 FCM2782 FCM2783 FCM2784 FCM2785 FCM2786 FCM2787 FCM2788 FCM2790 FCM2791 FCM2792 FCM2793 FCM2794 FCM2795

20 20 20 20 20 20 20 20 20 20 20 28 28 28 28 28 28 28 28 28 28 28 28 28 28 20 20 20 20 20 20 20

FCM2730 FCM2731

20 20

FCM2610 FCM2611

FCM2726 FCM2727 FCM2728 FCM2729

20 20 18, 25 18, 25

FCM2602 FCM2603 FCM2608 FCM2609

FCM2629 FCM2630 FCM2631 FCM2632 FCM2633 FCM2634 FCM2635 FCM2636 FCM2637 FCM2638 FCM2639 FCM2700 FCM2701 FCM2702 FCM2703 FCM2704 FCM2705 FCM2706 FCM2707 FCM2708 FCM2709 FCM2710 FCM2711 FCM2712 FCM2714 FCM2719 FCM2720 FCM2721 FCM2722 FCM2723 FCM2724 FCM2725

19 19 19 19 19 19 19 19 19 19 19 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

FCM2537 FCM2538 FCM2539 FCM2540 FCM2541 FCM2542 FCM2543 FCM2544 FCM2545 FCM2546 FCM2547 FCM2581 FCM2582 FCM2583 FCM2584 FCM2585 FCM2586 FCM2587 FCM2588 FCM2589 FCM2590 FCM2591 FCM2592 FCM2593 FCM2594 FCM2595 FCM2596 FCM2597 FCM2598 FCM2599 FCM2600 FCM2601

Part Number FCM2612 FCM2613 FCM2614 FCM2615 FCM2616 FCM2617 FCM2618 FCM2619 FCM2620 FCM2621 FCM2622 FCM2623 FCM2624 FCM2625 FCM2626 FCM2627 FCM2628

Page 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19

Part Number FCM2520 FCM2521 FCM2522 FCM2523 FCM2524 FCM2525 FCM2526 FCM2527 FCM2528 FCM2529 FCM2530 FCM2531 FCM2532 FCM2533 FCM2534 FCM2535 FCM2536

I NUTMRBOEDRU ICNTDI O N PART N EX

PART NUMBER INDEX (CONT.)

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

60 61

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

24 24 24 16

37 37

FCM3588 FCM3591

27 24

FCM3721 FCM3722

16 24

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

FCM3717 FCM3718 FCM3719 FCM3720

27 27 27 27

FCM3584 FCM3585 FCM3586 FCM3587

FCM3464 FCM3465

14 14 37 37

25 25

24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24

FCM2995 FCM2996

FCM3672 FCM3673 FCM3674 FCM3675 FCM3676 FCM3677 FCM3678 FCM3679 FCM3680 FCM3681 FCM3682 FCM3683 FCM3684 FCM3685 FCM3686 FCM3687 FCM3696 FCM3697 FCM3698 FCM3701 FCM3702 FCM3703 FCM3704 FCM3705 FCM3706 FCM3707 FCM3708 FCM3712 FCM3713 FCM3714 FCM3715 FCM3716

FCM3417 FCM3418 FCM3462 FCM3463

Page 24 24 24 24 24 37 37 40 41 40 40 40 24 24 24 24 24

37 37 37 37 31 37 37 37 37 37 37 37 37 37 37 37 37 37 24 24 27 24 24 24 24 24 24 24 24 24 24 24

22 22 25 25

Part Number FCM3601 FCM3602 FCM3603 FCM3604 FCM3605 FCM3627 FCM3642 FCM3644AE FCM3661AE FCM3662AE FCM3663AE FCM3664AE FCM3667 FCM3668 FCM3669 FCM3670 FCM3671

FCM3485 FCM3486 FCM3487 FCM3488 FCM3489 FCM3497 FCM3498 FCM3499 FCM3513 FCM3514 FCM3515 FCM3516 FCM3517 FCM3534 FCM3535 FCM3536 FCM3537 FCM3538 FCM3554 FCM3555 FCM3556 FCM3566 FCM3567 FCM3570 FCM3571 FCM3572 FCM3573 FCM3574 FCM3575 FCM3576 FCM3577 FCM3578

FCM2981 FCM2982 FCM2992 FCM2993

Page 37 37 37 37 37 37 37 37 37 37 37 24 24 37 37 37 37

35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 22 22 22 22 22 22 22 22 40 41 14

FCM3117 FCM3118 FCM3119 FCM3120 FCM3121 FCM3122 FCM3123 FCM3124 FCM3125 FCM3126 FCM3127 FCM3128 FCM3129 FCM3130 FCM3131 FCM3132 FCM3133 FCM3134 FCM3135 FCM3136 FCM3137 FCM3148 FCM3149 FCM3150 FCM3151 FCM3155 FCM3156 FCM3157 FCM3158 FCM3362AE FCM3410AE FCM3416

Part Number FCM3466 FCM3467 FCM3468 FCM3469 FCM3470 FCM3472 FCM3473 FCM3474 FCM3475 FCM3476 FCM3477 FCM3479 FCM3480 FCM3481 FCM3482 FCM3483 FCM3484

30 30 30 30 30 30 30 30 29 25 25 25 25 25 25 25 25 33 18, 25 18, 25 18, 25 30 30 30 22 22 22 22 22 22 22 22

Page 25 25 25 25 25 25 36 36 36 36 36 36 36 16 16 16 16

FCM2942 FCM2943 FCM2944 FCM2945 FCM2946 FCM2947 FCM2948 FCM2949 FCM2950 FCM2953 FCM2954 FCM2955 FCM2956 FCM2957 FCM2958 FCM2959 FCM2960 FCM2961 FCM2963 FCM2964 FCM2965 FCM2966 FCM2967 FCM2968 FCM2971 FCM2972 FCM2973 FCM2974 FCM2975 FCM2978 FCM2979 FCM2980

Part Number FCM2997 FCM2998 FCM2999 FCM3001 FCM3002 FCM3003 FCM3081 FCM3082 FCM3083 FCM3084 FCM3085 FCM3086 FCM3087 FCM3088 FCM3089 FCM3091 FCM3092

Page 29 29 29 29 29 29 29 29 29 29 29 29 29 30 30 30 30

BIEORN I N D E X IPNATRRTO N D UM CT

Part Number FCM2925 FCM2926 FCM2927 FCM2928 FCM2929 FCM2930 FCM2931 FCM2932 FCM2933 FCM2934 FCM2935 FCM2936 FCM2937 FCM2938 FCM2939 FCM2940 FCM2941

PART NUMBER INDEX (CONT.)

62 61

Part Number FCM5100 FCM5103 FCM5104 FCM5105 FCM5106 FCM5119 FCM5120 FCM5121 FCM5122 FCM5123 FCM5124 FCM5125 FCM5126 FCM5129 FCM5130 FCM5131 FCM5132

Page 19 19 19 19 19 19 20 20 20 20 20 20 20 20 20 20 20

Part Number FCM5010 FCM5011 FCM5012 FCM5014 FCM5013 FCM5015 FCM5016 FCM5017 FCM5020 FCM5021 FCM5022 FCM5023 FCM5024 FCM5025 FCM5030 FCM5031 FCM5032

Page 8 8 8 8 8 7 7 7 7 7 8 8 8 8 8 9 9

Page 27 27 27 27 27 22 22 28 28 28 28 28 28 23 23 23 23

20 20 20 28 28 28 28 28 28 27 27 27 27 27 20 20 20 20 20 20 21 21 21 21 21 21 21 21 21 26 26 26

FCM5133 FCM5134 FCM5135 FCM5136 FCM5137 FCM5138 FCM5139 FCM5140 FCM5141 FCM5142 FCM5147 FCM5148 FCM5149 FCM5150 FCM5151 FCM5152 FCM5156 FCM5160 FCM5162 FCM5163 FCM5166 FCM5167 FCM5170 FCM5179 FCM5183 FCM5184 FCM5185 FCM5186 FCM5187 FCM5190 FCM5240 FCM5241

23 23 23 23 23 23 23 23 23 23 23 23 23 29 29 29 21 21 21 21 21 21 21 32 32 32 19 22 28 22 25 25

19 19 19 19

FCM5074 FCM5075 FCM5076 FCM5077

26 26 26 26

FCM5243 FCM5244 FCM5245 FCM5246

25 25 25 25

19 19

FCM5091 FCM5099

27 27

FCM5254 FCM5255

29 29

FCM5033 FCM5034 FCM5035 FCM5060 FCM5061 FCM5062 FCM5063 FCM5064 FCM5065 FCM5099 FCM5100 FCM5103 FCM5104 FCM5105 FCM5306 FCM5036 FCM5037 FCM5038 FCM5039 FCM5040 FCM5048 FCM5049 FCM5050 FCM5051 FCM5052 FCM5053 FCM5054 FCM5055 FCM5056 FCM5071 FCM5072 FCM5073

9 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10 10 7 7 7 7 7 8 8 8 8 8 19 19 19 19

FCM5008 FCM5009

7 7

FCM4075 FCM4076

FCM5004 FCM5005 FCM5006 FCM5007

10 7 7 7

FCM4066 FCM4072 FCM4073 FCM4074

FCM4434 FCM4435 FCM4436 FCM4442 FCM4443 FCM4444 FCM4445 FCM4446 FCM4452 FCM4453 FCM4454 FCM4455 FCM4456 FCM4462 FCM4463 FCM4464 FCM4465 FCM4466 FCM4472 FCM4473 FCM4474 FCM4475 FCM4476 FCM4482 FCM4483 FCM4484 FCM4485 FCM4486 FCM5000 FCM5001 FCM5002 FCM5003

16 24 24 24 24 24 24 27 8 8 8 8 8 9 9 9 9 9 9 9 9 9 9 10 10 10 10 10 10 10 10 10

FCM3824 FCM3827 FCM3828 FCM3829 FCM3830 FCM3831 FCM3832 FCM3833 FCM4022 FCM4023 FCM4024 FCM4025 FCM4026 FCM4032 FCM4033 FCM4034 FCM4035 FCM4036 FCM4042 FCM4043 FCM4044 FCM4045 FCM4046 FCM4052 FCM4053 FCM4054 FCM4055 FCM4056 FCM4062 FCM4063 FCM4064 FCM4065

Part Number FCM4082 FCM4083 FCM4084 FCM4085 FCM4086 FCM4412 FCM4413 FCM4414 FCM4415 FCM4416 FCM4422 FCM4423 FCM4424 FCM4425 FCM4426 FCM4432 FCM4433

Page 24 24 24 24 24 24 24 24 24 24 24 24 24 24 16 16 16

Part Number FCM3723 FCM3724 FCM3725 FCM3726 FCM3727 FCM3740 FCM3741 FCM3742 FCM3743 FCM3744 FCM3749 FCM3750 FCM3751 FCM3752 FCM3821 FCM3822 FCM3823

This page is part of a complete catalog containing technical and safety data that must be reviewed when selecting a product.

63 62

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

INTRODUCTION

I NUTMRBOEDRU ICNTDI O N PART N EX

PART NUMBER INDEX (CONT.)

FCU0810 FCU0815

24 24

FCM5830 FCM5831

FCU0610 FCU0615 FCU0620 FCU0806

FCV0615 FCV0620 FCV0815 FCV0820 FCV1015 FCV1020 FT1258AE FT1380-1-1AE FT1380-115AE FT1380-275-M370AE T-400AE

27 24 24 24

Page 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

FCM5815 FCM5827 FCM5828 FCM5829

11 11 11 11 11 11 11 11 34 34 17 17 34 34 32 32 32 38 38 38 38 38 38 38 38 38 38 6 6 6 6 6

Part Number FCU0820 FCU1006 FCU1010 FCU1015 FCU1020 FCU1206 FCU1210 FCU1215 FCU1220 FCU1606 FCU1610 FCU1615 FCU1620 FCU2006 FCU2010 FCU2015 FCU2020

FCN0615 FCN0620 FCN0815 FCN0820 FCN1015 FCN1020 FCN1215 FCN1220 FCP0101 FCP0102 FCP0107HA FCP0108HA FCP0129 FCP0134 FCP0138 FCP0139 FCP0140 FCR1203 FCR1206 FCR1210 FCR1215 FCR1220 FCR2403 FCR2406 FCR2410 FCR2415 FCR2420 FCU0406 FCU0410 FCU0415 FCU0420 FCU0606

24 24 24 24 28 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 26 26 26 26 26 26 26

FCM5686 FCM5687 FCM5712 FCM5713 FCM5714 FCM5715 FCM5716 FCM5717 FCM5718 FCM5719 FCM5722 FCM5723 FCM5724 FCM5725 FCM5726 FCM5727 FCM5740 FCM5741 FCM5742 FCM5743 FCM5744 FCM5749 FCM5750 FCM5751 FCM5752 FCM5769 FCM5799 FCM5081 FCM5082 FCM5083 FCM5084 FCM5085

Page 24 26 25 25 25 25 25 25 25 25 25 25 25 25 25 25 24

Part Number FCM5832 FCM5893 FCM5953 FCM5954 FCM5955 FCM5956 FCM5992 FCM5993 FCM5995 FCM5996 FCM5997 FCM5998 FCM5999 FCM6001 FCM6002 FCM6003 FCM6714

Page 29 25 24 24 27 24 24 24 24 24 24 24 24 24 24 24 24

11 11 11 11 11 11 40 42 42 42 43

BIEORN I N D E X IPNATRRTO N D UM CT

Part Number FCM5256 FCM5263 FCM5554 FCM5555 FCM5556 FCM5567 FCM5669 FCM5670 FCM5671 FCM5672 FCM5673 FCM5674 FCM5675 FCM5677 FCM5678 FCM5684 FCM5685

PART NUMBER INDEX (CONT.)

6 6 6 6 6 6

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

64 63

INTRODUCTION

NOTES

64

Eaton Aeroquip Performance Products by Eaton A-SPPE-CC001-E November 2013

Eaton Hydraulics Group USA 14615 Lone Oak Road Eden Prairie, MN 55344 USA Tel: 952-937-9800 Fax: 952-294-7722 www.eaton.com/hydraulics

© 2013 Eaton All Rights Reserved Printed in USA Document No. A-SPPE-CC001-E October 2013

Eaton Hydraulics Group Europe Route de la Longeraie 7 1110 Morges Switzerland Tel: +41 (0) 21 811 4600 Fax: +41 (0) 21 811 4601

Eaton Hydraulics Group Asia Pacific Eaton Building No.7 Lane 280 Linhong Road Changning District, Shanghai 200335 China Tel: (+86 21) 5200 0099 Fax: (+86 21) 2230 7240