TRANEMO ADVANCED WORKWEAR
2
We develop and supply advanced workwear. Through expertise and innovation we create safer workplaces in a sustainable way.
3
4
SUSTAINABILITY Since our establishment in 1934, quality and sustainability has always been of high importance and central in our way of working. For three generations, we have made it our responsibility to manufacture and develop long lasting products. With the support of science and new technology we make sure that we keep on being at the forefront of development of flame-retardant products with the least environmental impact as possible. The textile industry is like a lot of other industries, facing different challenges to rethink the way of working to be more sustainable. The need for change in the textile industry also applies to us producing workwear. We are already working with high quality components to produce longer lasting products, but we also need to take the next steps towards in the direction towards becoming an even more sustainable company - socially, economically, and environmentally.
5
SUSTAINABLE CHOICES Tranemo takes responsibility for the way our company affects people, animals and the environment. A focus area of great important for us is that we are actively working to stop using Per- and polyfluoroalkyl substances (PFAS) in our products to minimise the use of chemicals. We have chosen to phase out PFAS in the cases where we see that a repellence of oils and oil-based chemicals is not directly necessary on the garments. For people and the environment Tranemo recommends choosing PFAS-free products where there are available alternatives. We are constantly working to expand our PFAS-free range. More information about our work with PFAS can be found on our website. As important as it is for us to continue with the development of new and exciting products, it is just as important to improve and switch to more sustainable alternatives in our existing materials. For example, we do this by using recycled fibres and more sustainable cotton. It is of significant importance that the more sustainably produced alternatives we offer are of equally high quality. Tranemo will never compromise on quality, because producing long lasting garments are the best way to minimise the environmental impact. By designing garments that are easy to repair, we extend the lifetime further. We want to do the right thing from the beginning. For us, it is about finding a good balance between the right protection, design, and the most suitable materials of high quality during the development stage.
Read more in our sustainability report.
This catalogue has been produced at a climate-neutral printing establishment.
6
8 SAFETY & FLAME RETARDANT CLOTHING 9 Risk assessment 23 Standards & symbols 34 Shell FR 36 Switch
92 Outerwear
38 Stretch FR
100 Base Layer
44 Office FR
103 Underwear
46 Tera TX
104 Coats & Shirts
60 Tera TX Arc 2
106 Sweatshirts & T-Shirts
64 Cantex Arc 25+ 110 Gloves 68 Cantex Weld Stretch 111 Welding Accessories
78 Cantex 57 80 Outback Heavy Welding
112 Head Protection 113 Caps & Neck Protection
82 Magma 84 Apex
114 Accessories
86 Zenith
114 Socks
90 Edge
115 Belts & Braces
TRANEMO.CO.UK @TRANEMO.WORKWEAR #TRANEMOWORKWEAR
7
116 HIGH VISIBILITY & WORKWEAR 118 Vision HV - Outerwear 120 Vision HV 124 Sweatshirts & Waistcoats HV 126 Comfort Stretch 132 Comfort Light 133 Original Cotton 134 Craftsman Pro 138 Outerwear 140 Base Layer 140 Shirts 141 Sweatshirts & T-Shirts 142 Accessories
INFORMATION 144 On Demand 145 Heat seal badges 146 Care 148 Fabric Info 152 Size guide 154 Quick reference
8
FLAME RETARDANT
FLAME RETARDANT WORKWEAR Tranemo are a leading European supplier of Inherent Flame Retardant and Arc Flash workwear. With our extensive experience in developing innovative and functional workwear, we strive towards zero flame and heat related injuries. All for a safer workplace. Since 1934.
FLAME RETARDANT
Each company is responsible for making their own Risk Assessment and providing their workers with the correct protection for workplace related hazards. When customers come to us with their Risk Assessments and specific requirements, we strive to find the right solution for them. Tranemo tries to make sure that the solution is functional, practical, comfortable and offers the workers the correct levels of protection. We can develop functionality and protection according to each case, very often going far beyond just fulfilling the standards. In order to establish a clear connection between working environments with varying levels of risk and our large range of Flame Retardant clothing, we have divided the collections into five different segments with an associated symbol. The new symbols, each representing an industry sector, will help you easily find the right protective clothing. The following five segments show the industry sector and the associated risk analysis. The same segment also shows the ranges Tranemo recommends for each particular industry sector.
ELECTRICITY & POWER SMELTERS & FOUNDRIES WELDING RAILWAYS CHEMICALS & PETROCHEMICALS
9
10
FLAME RETARDANT
ZENITH LADIES
ELECTRICITY & POWER Electric Arc and Flame Retardant protective clothing, for those who work in the electricity and distribution industry, or on electrical installations that have a higher power level than domestic systems. The range includes Flame Retardant clothing for powerline electricians, electrical installers, industrial electricians, electric car workshop technicians, server installers / technicians, electrical engineers and other personnel who work where there is a risk of Electric Arcs. We also offer protective clothing for summer and winter use, high visibility clothing and a large range of workwear for ladies. Tranemo’s multi-layer Skinsafe™ system provides protection against Electric Arc that is greater than the sum of the individual layers - without compromising on comfort. Our Flame Retardant clothing delivers certified arc protection in accordance with EN 61482-2 Open Arc and Box tests. Contact us if you have any questions or need assistance with choosing the right protective clothing. We will help you find the right solution.
34 SHELL FR
36 SWITCH
38 STRETCH FR
44 OFFICE FR
46 TERA TX
60 TERA TX ARC 2
64 CANTEX ARC 25+
86 ZENITH
FLAME RETARDANT
RISK ASSESSMENT ELECTRICITY & POWER •
• •
Electric Arc - Molten metal splashes - Radiant heat - Convective heat - Electric shock - Shock waves - High noise levels - Optical radiation - Toxic gas Flame & Heat Welding sparks (limited)
Workers in the Electricity and Power industry are at risk of exposure to Electric Arc flashes that can occur if there is a short circuit, switching fault, operator error or equipment failure. Electric Arc can expose workers to very high energy levels and often lead to severe burns and hand and eye injuries. Wearing incorrect workwear can make injuries worse, so it is important to choose the right protective clothing that provides arc protection in every layer. It is equally important to choose face protection and gloves that are certified to protect against Electric Arc. All of Tranemo’s Electric Arc garments have the Arc Rating value stated on the outside FR label to make it easy for you to choose the right protection. In the revised standard EN 61482-2, ELIM is used as the Arc Rating value. As additional information, the ATPV/EBT value is also stated and refers to the Risk Assessment standard NFPA 70E. All new Tranemo products will be tested according to EN 61482-2 and marked with both the ELIM and ATPV/EBT values. RISK EVALUATION When working as an electrician you need garments certified according to EN 61482-2 / IEC 614822 in combination with EN ISO 11612 as there may be a risk of an Electric Arc. Electricians working outdoors may also need High Visibility garments certified to EN ISO 20471. An Electric Arc accident comprises of many varied risks that will affect the PPE clothing in different ways, but with the right solution we can help to minimise the impact of these risks. A Tranemo Skinsafe™ system where the outer layer has an ELIM value above 8 cal/cm², PPE 2 (according to NFPA 70E) is recommended. The switchgear range ‘Switch’ is designed for work where there is a risk of being exposed to Electric Arc with a very high energy level - for example in switchgear environments, when cutting off power or commissioning electrical systems. Garments in the ‘Switch’ range offer protection of 40 cal/cm² (PPE4).
ELECTRIC CAR INDUSTRY RISK EVALUATION When working in the electric car industry, Tranemo recommends garments certified according to standard EN ISO 11612 and EN 61482-2 / IEC 61482-2. When working with car batteries and defective batteries there is a risk of an Electric Arc. With the right solution of clothing marked EN 61482-2 / IEC 61482-2, the impact of these risks will be minimised. A Tranemo Skinsafe™ system with an outer layer that has an ELIM value above 8 cal/cm², PPE 2 (according to NFPA 70E) is recommended. When the power to the car is cut off and / or switched on, high spikes in current are created and there is a risk of being exposed to Electric Arc with very high energy levels. The Switch range is developed for these risks and offers protection to an energy level of 40 cal/cm² (PPE 4, according to NFPA 70E). For occasional welding, the fabric also needs to pass EN ISO 11611 or use welding accessories to offer further protection. The range Tera TX with visible details is suited for car industries because it is approved for the above certifications and is Non-Metal/scratch free.
11
12
FLAME RETARDANT
ZENITH LADIES
SMELTERS & FOUNDRIES Flame Retardant clothing that offers the highest level of protection against splashes of molten metal and radiant heat. The ranges are the ideal solutions for those working in smelting plants, foundries or with molten minerals such as stone or glass. Remember that it is important to choose the right collection, depending on the metal or mineral that you are working with. We have collections for working with molten iron, steel, copper, aluminium, brass, zinc, lead and molten minerals. The range also includes protective clothing for summer and winter use, high visibility clothing and a large range of workwear options for ladies. Our protective clothing is certified against splashes of molten metal and radiant heat in accordance with EN ISO 11612. To block radiant heat and increase protection, a Tranemo Skinsafe™ system of 2 or 3 layers is recommended. The recommended collections may include protective clothing that lacks certain certifications due to the design of the garment, such as garments with hanging pockets. Contact us if you have any questions or need assistance with choosing the right protective clothing for your work. We will help you find the right solution.
68 CANTEX WS
78 CANTEX 57
80 OUTBACK HW
82 MAGMA
84 APEX
FLAME RETARDANT
RISK ASSESSMENT SMELTERS & FOUNDRIES The working environment in smelting plants and foundries often involves high temperatures, intense radiant heat and the risk of splashing molten metal splashes. To meet these risks, several layers of PPE clothing are usually needed. To avoid injuries, Flame Retardant clothing that meets EN ISO 11612 is required, and depending on the type of metal used, protective clothing must also be certified with the correct code letter. • • • • •
Splashes of molten metal Flame & Heat Heat stress Electric Arc (limited) Traffic accidents (limited)
RISK EVALUATION Molten metal sticking to a garment can cause burns. To minimise this risk, the EN ISO 11612 D and E defines some design requirements, such as closed pockets and hidden metal parts due to the fact that metal will conduct heat. Heat stress is also a risk in these environments. To block the radiant heat and increase protection, a Tranemo Skinsafe™ system of 2 or 3 layers is recommended. The air gap between the layers protects the wearer from heat and energy. Many of the Tranemo garments also include some kind of visibility to avoid traffic related accidents. Iron and steel When working with molten iron or steel, you need garments certified according to EN ISO 11612 E1-E3 - where E3 is the highest level. If the fabric resists molten iron and this doesn’t stick to the surface, it will normally also be acceptable for use against molten copper, molten phosphor bronze and molten brass. Aluminium For smelters and re-smelters working with molten aluminium, you need garments according to EN ISO 11612 D1-D3 - where D3 is the highest level. If the fabric resists molten aluminium and this doesn’t stick to the surface it normally means it will be acceptable for use against molten aluminium and other molten metals. Zinc Zinc challenges PPE clothing in a very special way as it sticks to most fabrics. Tranemo Apex range has an outer layer in Aramid, with a high degradation temperature that will not break open - even if the zinc sticks to the fabric. To block the radiant heat and increase protection, Apex also features double layer fabric on the front of the jacket and trousers. When working with molten zinc, you need garments certified at least according to EN ISO 11612, made in a fabric that has higher degradation temperature of more than 420°C (melting point of zinc). Other metals Other metals and alloys have different melting temperatures, viscosity and production processes that will challenge the PPE / clothing in different ways. If you are working with other molten metals, please ask Tranemo for advice in finding the correct solution for your business.
13
14
FLAME RETARDANT
ZENITH LADIES
WELDING Flame Retardant welding garments that offer the highest level of protection against welding spatter and sparks from grinding or cutting metal. Our protective clothing is ideal if your work involves welding, grinding, hot working, finishing metal castings or maintenance. Remember to choose welding garments that provide the right level of protection EN ISO 11611 class 1 for light welding work or class 2 for heavy duty welding. The protection you need may also depend on the welding methods used, welding frequency or type of grinding work. The Outback HW collection also includes extra welding protection, such as welding aprons, protective sleeves and welding balaclavas. The welding range includes protective clothing for summer and winter use, high visibility clothing, workwear for ladies and reinforced garments. Our welding garments are certified for welding according to EN ISO 11611. The recommended collections may include protective clothing that lacks certain certifications due to the design of the garment, such as garments with hanging pockets. Contact us if you have any questions or need assistance with choosing the right protective clothing for your work. We will help you find the right solution.
64 CANTEX ARC 25+
68 CANTEX WS
78 CANTEX 57
80 OUTBACK HW
90 EDGE
FLAME RETARDANT
RISK ASSESSMENT WELDING A welder who is constantly exposed to weld spatter needs durable protective clothing that does not trap weld spatter, either in the fabric itself, or in pockets. The heat and UV radiation that the welder is exposed to are also dangerous, and we recommend the use of a Tranemo Skinsafe system with a ventilated welding garment. • • • •
Welding sparks UV radiation Flame & Heat Heat stress
RISK EVALUATION When working with heavy welding you need garments certified according to EN ISO 11611 class 2, which is the highest level of protection in combination with EN ISO 11612. The design is very restricted in the EN standard to ensure that welding sparks do not stick to the garment or go inside an open pocket. The UV and heat radiation will challenge the PPE clothing and cause heat stress for the wearer. Tranemo has added covered ventilations to increase the users comfort and avoid heat stress on some ranges suitable for welding. To block radiant heat and increase protection, a Tranemo Skinsafe™ system of 2 or 3 layers is recommended. Sparks from grinding and cutting can have a negative impact on the fabric. Tranemo always carry out an internal cutting test on our Flame Retardant fabrics in order to be able to recommend the best garment for grinding/cutting.
Type of welders’ clothing due to criteria relating to the process Class 1
Manual welding techniques with light formation of spatters and drops; Gas welding, TIG welding, MIG welding, Micro plasma welding, Brazing, Spot welding, MMA welding (with rutile-covered electrode)
Class 2
Manual welding techniques with heavy formation of splatters and drops; MMA welding (with basic or cellulose-covered electrode), MAG welding (with CO2 or mixed gas), MIG welding (with high current), Self-shielded flux cored arc welding, Plasma cutting, Gouging, Oxygen cutting, Thermal spraying.
Type of welders’ clothing due to criteria relating to the environmental conditions Class 1
Operation of machines; Oxygen cutting machines, Plasma cutting machines, Resistance welding machines, Resistance for thermal spraying, Bench welding.
Class 2
Operation of machines; In confined spaces, at overhead welding/cutting or in comparable constrained positions.
15
16
FLAME RETARDANT
ZENITH LADIES
RAILWAYS Flame Retardant workwear that provides protection from Electric Arc incidents and sparks from working with metal. Our protective clothing is ideal if you work near rail tracks, on the rails themselves or in other rail associated areas where there is a flame, heat or Electric Arc risk. The range includes protective clothing for summer and winter use, high visibility clothing in orange, workwear for ladies and reinforced garments for cutting rails. Tranemo’s multilayer Skinsafe™ system provides protection against Electric Arc that is greater than the sum of the individual layers, without compromising on comfort. Our protective clothing provides certified arc protection in accordance with EN 61482-2. Contact us if you have any questions or need assistance with choosing the right protective clothing for your work. We will help you find the right solution.
34 SHELL FR
38 STRETCH FR
46 TERA TX
64 CANTEX ARC 25+
68 CANTEX WS
86 ZENITH
90 EDGE
FLAME RETARDANT
RISK ASSESSMENT RAILWAYS Working on railways and in other rail-bound traffic is covered by strict safety regulations due to the hazardous working environment. Whether you are a rail technician, electrical installer, signal engineer or track welder, you must use the right personal protective equipment to suit the relevant risk analysis and safety instructions. It is important that you can be seen when working on rail tracks, and high visibility protective clothing can prevent accidents where there is a risk with passing trains and vehicles. To achieve a high level of safety in the workplace, it is important to wear Flame Retardant and Arc certified protective clothing that provides high visibility in compliance with EN ISO 11612, EN 61482-2 and EN ISO 20471 (plus RIS-3279-TOM in the UK).
• •
• • •
Traffic accidents with trains Electric Arc - Molten Metal splashes - Radiant heat - Convective heat - Electric shock - Shock waves - High noise - Optical radiation - Toxic gas Flame & Heat Welding sparks (limited) Sparks from grinding and cutting (limited)
RISK EVALUATION When working in the railway industry you need garments certified according to EN ISO 20471 / RIS-3279-TOM (GO/RT) to be visible. In addition, FR protection garments should be certified to EN ISO 11612 together with EN 61482-2 / IEC 61482-2 if there is a risk of an Electric Arc. An Electric Arc accident comprises many varied risks and will affect the PPE clothing in different ways, but with the right solution of clothing the impact of these risks will be minimised. A Tranemo Skinsafe™ system with an outer layer that has an ELIM value above 8 cal/cm², PPE 2 (according to NFPA 70E) is recommended. All our Electric Arc garments have the Arc Rating value stated on the outside FR label to make it easy for you to choose the right protection. In addition, if you are working with welding you need EN ISO 11611 certified garments or accessories to compliment your protection. In the UK you also need garments certified according to the national standard RIS-3279-TOM (GO/RT), defining the High-Visibility orange colour and the design on the Edge garments, according to this standard the garments must be at least EN ISO 20471 class 2. Sparks from grinding and cutting can have a negative impact on the fabric. Tranemo always carry out an internal cutting test on our Flame Retardant fabrics in order to be able to recommend the best garment for grinding/cutting.
17
18
FLAME RETARDANT
ZENITH LADIES
CHEMICAL & PETROCHEMICAL Flame Retardant and Anti-Static workwear that provides protection from chemical splashes that can occur when working in explosive environments. Our chemical clothing is also ideal if you work with particular chemicals in environments where there is a risk of dust or gas explosion. Remember that it is important to choose the right collection based on the chemicals you work with. The range includes protective clothing for summer and winter use, high visibility clothing and a large range of workwear for ladies. Our protective clothing is certified against splashes of chemicals in accordance with EN 13034 type PB (6) and static electricity in accordance with EN 1149-5. Tranemo has developed several fabrics featuring a PFAS-free finish (C0) that meets the requirements of EN 13034. A fluorocarbon free (PFAS-free) finish does not contain any fluorine atoms which is very difficult for nature to break down. This makes a PFAS-free product a better and more environmentally friendly choice. The recommended ranges may include protective clothing that lacks certain certifications due to the design of the garment, such as garments with hanging pockets. Contact us if you have any questions or need assistance with choosing the right protective clothing for your work. We will help you find the right solution.
46 TERA TX
84 APEX
78 CANTEX 57
FLAME RETARDANT
RISK ASSESSMENT CHEMICAL & PETROCHEMICAL Work that involves chemicals/petrochemicals often requires protective clothing that is certified to EN 13034, EN 1149-5 and EN ISO 11612. It is also important to identify which chemicals the company uses, so that protective clothing can be chosen that is appropriate for the specific chemicals or group of chemicals that are in use.
• • • • •
Splashes of chemicals Risk of explosion / ATEX-environment Heat & Flame Traffic accidents (limited) Electric Arc (Industrial Electricians)
RISK EVALUATION When working within the petrochemical industry, Tranemo recommends garments certified according to EN 13034, EN 1149-5 and EN ISO 11612. The Anti-Static properties of a garment minimise the risk of creating sparks (a source of ignition), which could cause an explosion. In case of a risk of an Electric Arc, you also need garments certified according to EN 61482-2/IEC 61482-2. High Visibility (EN ISO 20471) may be required, if there is a risk from moving vehicles or where visibility of employees is important. Most of the Tranemo FR fabrics are EN 13034 certified and have a treatment that protects against chemicals in spray form. Garments that are suitable and have an approved design have the EN 13034 symbol in the CE-marking. It is important to choose the right fabric that passes the risk of the chemical group that is used within a business. These garments need to go through industrial laundry to re-activate and reimpregnate the EN 13034 finish. This applies to fabrics with or without PFAS.
A MORE ENVIRONMENTALLY FRIENDLY CHOICE If your company does not need protection against O-xylene or Butanol you can choose a fabric with a PFAS free finish. Tranemo’s PFAS-free finish passes EN 13034 for acid and alkaline. Per- and polyfluoroalkyl substances (PFAS) are a diverse group of synthetic chemicals used in a wide range of consumer and industrial products. PFAS is used for its good resistance to grease, oil, water and heat, but is a poor environmental choice. Tranemo works hard on phasing out PFAS where it is not necessary, developing new ranges with PFAS-free finishes. We also see the need for a strict chemicals legislation to minimise and eventually end the use of PFAS. In 2021 we joined the Chemsec’s Corporate PFAS Movement - ”No to PFAS” to influence the way chemicals legislations are implemented in practice. A PFAS-free finish does not contain any fluorine atoms which is very difficult for nature to break down. This makes a PFAS-free product a better and more environmentally friendly choice.
19
20
FLAME RETARDANT
RISK ASSESSMENT ATEX - EXPLOSIVE INDUSTRY In situations where there is a risk that protective garments could generate sparks (an ignition source) that could ignite explosive material, Flame Retardant workwear that has anti-static properties is required. A combination of anti-static materials and correct garment design can eliminate the risk of sparks. Protective clothing with anti-static properties is extremely important when working with petrochemicals, gas and in other areas where there is a high risk of explosion.
• •
Risk of explosion Flame & Heat
RISK EVALUATION When working in ATEX environments, Tranemo recommends garments certified according to standard EN 1149-5 in combination with EN ISO 11612. The Anti-Static properties of a garment minimise the risk of creating sparks (a source of ignition) which could cause an explosion. This is of significant importance when working in explosive areas e.g. petrochemicals, gas and other explosive industries. The majority of our FR garments are EN 1149-5 certified. Anti-Static garments marked EN 1149-5 are intended to be worn in ATEX zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer. Wear and tear can affect the protection of the garment, and it is crucial that they are worn the correct way within these environments. Anti-Static garments have Anti-Static fibres woven into the fabric and the metal parts are covered according to the EN design requirements. The range Tera TX is especially suited for ATEX environments.
Atex zone classifications for gas, mist and vapours
Atex zone classifications for dust
Zone 0
Environment where a mixture of air and flammable gas, mist or vapour occurs often and persists for long periods of time.
Zone 20 Environment where explosive clouds of dust appear often and for extended periods.
Zone 1
Environment where a mixture of air and flammable gas, mist or vapour is likely to occur under normal conditions.
Zone 21 Environment where explosive clouds of dust can appear under normal conditions.
Zone 2
Environment where a mixture of air and flammable gas, mist or vapour can occur under normal conditions but dilutes quickly.
Zone 22 Environment where explosive clouds of dust are not likely to appear and if they do, disappears quickly.
FLAME RETARDANT
RISK ASSESSMENT TRAFFIC It is very important to be seen when you work in situations where there is vehicle traffic and a garment that is certified to EN ISO 20471 is recommended. The fluorescent fabric ensures that you are seen during the day, whilst reflective stripes ensure you are visible in poor light or when it is dark. • •
Traffic Accidents Need for day and night visibility
RISK EVALUATION If you are working near moving vehicles or mobile machinery (e.g. forklifts) and you have a potential risk of impact from vehicles or machinery, then you need to wear appropriate High Visibility clothing. Since this is one of the most common workplace accidents, at Tranemo we include High Visibility detail in most of the outdoor garments that we design. The demands in the standard sets the rules for which design, functionality and fabric qualities should be used in a High Visibility collection. Yellow and Orange High Visibility colours offer the user greater flexibility and make it possible for users to have designated HV colours in the workplace – for example, to differentiate between workers in different locations or areas. To achieve High Visibility certification, the garment needs a certain area of fluorescent fabric and reflective tape. The higher the area, the higher the high visibility class the garment will achieve, with Class 3 being the highest.
21
22
FLAME RETARDANT
Tranemo only uses Inherent Flame Retardant fibres of the highest quality. This means you get permanent flame protection as long as the garment lasts. Tranemo does not believe in a multi-norm concept - that one garment would be enough for all risks and industries. Instead we develop unique solutions with high functionality for each risk assessment – without compromising on your safety.
ZENITH LADIES
FLAME RETARDANT
STANDARDS & SYMBOLS PPE Regulation (EU)2016/425 All Employers are obligated to perform a risk assessment in relation to Occupational Health and Safety legislation. • • •
Hazard identification - Identify the risk factors that have the potential to cause harm. Risk analysis and risk evaluation - Analyse and evaluate the risk associated with the hazard. Risk control - Determine appropriate ways to eliminate the hazard or control the risk when the hazard cannot be eliminated.
A risk assessment is the overall process of hazard identification, risk analysis and risk evaluation. PPE (Personal Protective Equipment) shall be used when the risk cannot be avoided or entirely eliminated. To protect the workers from these risks, the Employer shall evaluate and analyse these risks to determine what functions are required from the PPE and then choose appropriate PPE. The key reason for wearing FR clothing is to ensure that the garments do not catch fire and/or to limit flame spread, thereby giving time to react in the event of an accident. There are different certifications and symbols for different risks and Tranemo want to make sure you choose the right combination that fits your risk assessment. All Tranemo PPE Clothing follows the Regulation (EU)2016/425 and the latest European (EN) standards for PPE Clothing covered by the Regulation. All garment certificates and Declaration of Conformity are available on our website, www.tranemo.co.uk. There are 3 categories within the PPE Regulation; Category I low risk of injury (e.g. rain) Category II - risk of injury (e.g. heat/flame, moving vehicles) Category III - high risk of injury (e.g. Electric Arc, heat/flame, chemicals) Tranemo Category III garments have a production quality monitoring system (Module D according to the Regulation), to ensure that the garments are safe to use. They are marked with CE and the number of the Notified Body who have issued the EU type-examination certificate.
On the following pages you will find information about the symbols and EN standards used by Tranemo. For more information about standards, visit tranemo.co.uk.
23
24
FLAME RETARDANT
STANDARDS & SYMBOLS
CE marking for protective garments All Tranemo PPE Clothing is CE marked. The CE marking indicates that a Notified Body has CE type examined these garments according to the PPE Regulation (EU)2016/425. On Tranemo garments you will find this symbol on the inside CE label. The CE label also shows which standards and classes the garments are approved for.
UKCA marking for protective garments The United Kingdom government plans to introduce legislation which prolongs the acknowledgement of CE-marked PPE beyond 2024-12-31. PPE is reported to be given the flexibility to be placed on the United Kingdom market either with CE- or UKCA-marking.
Information symbol When you find this symbol on the CE label inside the PPE garment it indicates that there is additional information from Tranemo attached to your PPE garment. This information must be read before you start using the garment to ensure that it is worn correctly and giving the optimum protection in the workplace.
1(2)
FLAME HIGH
RETARDANT VISIBILITY
User guideline - Flame Retardant clothing en, sv, de, fr, no, da, fi, nl, pt, es, it, pl, cs
User guideline High Visibility clothing
EN ISO 11612 EN ISO 14116
IEC 61482-2
IEC 61482-2 EN 61482-2
EN 1149-5
EN ISO 11611
EN 13034 Type PB[6]
EN ISO 20471
COLD RAIN
UV
User guideline
User guideline
User guideline
Protective clothing against cold
Protective clothing against rain
Protection against UV radiation
EN 342
EN 343
EN 13758-2
EN ISO 15797 Procedures for industrial laundry and finishing of workwear EN ISO 15797 is a wash test method used for evaluating textiles / garments that are to be industrially washed and consists of both washing and drying processes. Requirements for test results are determined in the respective EN standard, for example in EN ISO 20471, EN ISO 11612 and EN 1149-5. On products marked with the PRO symbol, the number of washes the fabric has been washed, before being tested, is indicated, for example 50 washes. This means that the fabric in the garment can be industrially washed at least 50 times without the properties for Flame protection, High Visibility or Anti-Static deteriorating. If the garment is undamaged and in good condition, it can be washed and used more times than the stated number of tests. Tranemo performs fabric tests after 50 industrial laundry washes according to EN ISO 15797 of: EN ISO 11612 A1 Surface Ignition, EN ISO 20471 High Visibility and EN 1149-3 Anti-static. Since EN ISO 15797 is always performed on new, clean fabrics where no dirt is involved, Tranemo completes these with ’real’ wearer tests of workwear in combination with washing at our industrial laundry partners to get the most reliable results. After the wearer test and laundry, we then check that the garments still maintain the highest performance. Tranemo also performs internal wash tests before each production to ensure that we maintain the highest performance on fabrics and reflective tapes.
Standard 100 by OEKO-TEX® Products tested for harmful substances Most of the fabrics and accessories that Tranemo uses are certified to class 1 or 2 according to Oeko-Tex® standard 100. Oeko-Tex® is an independent third-party certification process that ensures control of harmful and hazardous chemicals. The garments are tested for numerous regulated and non-regulated substances, which may be harmful to human health. When a garment is certified in accordance with Standard 100, you can be certain that every component of this garment, i.e. fabrics, thread, buttons, labels and other accessories, have been tested for harmful substances and that the garment therefore is harmless for human health. We work continuously to reach our goal - all products certified at garment level.
STANDARDS & SYMBOLS
FLAME RETARDANT
TRANEMO SKINSAFE™ TRANEMO SKINSAFE
Tranemo Skinsafe™ is the name of our multi-layer system designed to protect against flame, heat and Electric Arc injuries. Starting at skin level, Tranemo has taken a human-centric approach to design, putting the individual at the focus of protection.
SHIELD AIR GAP
INSULATION
The use of multiple thin layers instead of one thick layer, offers the wearer Flame Retardant protective clothing that is lightweight and gives a better freedom of movement. This allows the wearer to work more effectively and for longer periods.
AIR GAP AIR GAP
SKIN PROTECTION
YOUR SKIN
All Tranemo Skinsafe systems are tested according to ELIM at a testing institute. The tests are performed both on fabric layers and on complete garments to ensure that all accessories also pass the test. The Tranemo Skinsafe™ symbol is shown on each garment that can be combined in the Skinsafe system and recommended by Tranemo.
TRANEMO SKINSAFE™ - THE MULTI-LAYER PROTECTION SYSTEM LAYER 1 – SKIN PROTECTION In the event of an accident, wearing the wrong underwear can lead to the fabric burning and melting onto your skin. To protect against this, our Flame Retardant underwear offers the following benefits: • • • •
Inherent Flame Retardant safety Soft and comfortable Anti-static Does not give bad odour
LAYER 2 – INSULATION An insulating mid-layer should be worn to increase comfort during the colder months of the year. This layer creates a distance between layer 1 and 3 which insulates against heat as well as low temperatures. LAYER 3 – SHIELD The primary function of any outer layer must be protection – however, to be worn every day, these garments should also fit the body snugly and offer comfort, freedom of movement and meet practical needs such as storage. AIR GAP The air gaps between the layers of the Tranemo Skinsafe™ system have a low conductivity which increases the ability to block heat, insulate against cold and provide extra safety in demanding work situations.
YOU
SKIN PROTECTION AIR GAP
INSULATION
AIR GAP
SHIELD
AIR GAP
25
26
FLAME RETARDANT
STANDARDS & SYMBOLS
EN 61482-2:2020 / IEC 61482-2:2018 Protective clothing against the thermal hazard of an Electric Arc This standard specifies PPE Clothing when there is a risk of an Electric Arc – for instance when working with electricity on open equipment or maintenance / switching work. Electric Arc garments come under PPE Regulation Category III. Fabric properties and garment design are important parameters in the certification process of Electric Arc garments.
EN 61482-2:2020 ELIM 8,1 cal/cm² EBT 8,7 cal/cm² APC 1
IEC 61482-2:2018 ELIM 8,1 cal/cm² EBT 8,7 cal/cm² APC 1
IEC 61482-2:2009 ARC RATING 9,5 cal/cm² Class 1
During a transition period, Tranemo stock garments can have three different types of marking.
Working with electricity carries a risk of being injured by an Electric Arc. By wearing protective clothing that is tested and certified to withstand the energy of a possible Electric Arc, you help protect yourself against that risk. It is very important to wear protective clothing covering the whole body in order to achieve complete protection. To certify Electric Arc garments according to EN 61482-2, the protective clothing must be tested by at least one of the two different test methods: Open Arc IEC 61482-1-1 and Box test EN 61482-1-2. Open Arc – IEC 61482-1-1 This test method uses uses an open arc in a medium voltage range (> 1,000V), which is shot towards a fabric sample or a mannequin with protective clothing. Electrodes behind the fabric or garment register the heat transfer through the fabric/garment in order to determine when a person would receive a second degree burn. In the first stage, the fabric is exposed to different energy levels to obtain an approved Arc Rating. The revised test method is now more strictly controlled and regulated than before, which can mean that previously obtained results may differ from new re-test figures. However, the protection of the clothing is still the same as before, despite the fact that the Arc Rating may sometimes be a lower value after re-testing. In stage two, the protective clothing is tested with the energy level determined by the fabric test result. A new requirement that has been added to the standard in that the tested garment must not have an afterburn time of more than 5 seconds In stage two, the protective clothing is being shot with the energy level from the result of the fabric test. All tests result in two different Arc Ratings based on shooting results and the Stoll curve - which is used to calculate the probability that a person will get a burn. The higher the value, the better the protection. The first result, ELIM (Incident Energy Limit, cal/cm²), lets the user know how much energy the protective clothing can withstand without any risk (or 0% probability) of a second degree burn. The ELIM value is the official value for Electric Arc classification according to the new standard and most of the Tranemo ranges are updated with an ELIM value. The second result is either ATPV (Arc Thermal Performance Value, cal/cm²) or EBT (Energy Break Open Threshold, cal/cm²), and lets the user how much energy the protective clothing withstands when there is a 50% probability of a second degree burn. ATPV indicates the energy level required when the temperature of the mannequins skin reaches a level where a second degree burn could occur. EBT indicates the energy level at which the fabric breaks open and can result in a second degree burn. ELIM indicates the Arc Rating for the entire garment and as additional information Tranemo also indicates the lowest result of ATPV or EBT.
ELIM ELIM 8,1 8,1 cal/cm²cal/cm²
ELIM - The maximum incident energy the garment can withstand before the wearer would have a 0% probability of a second degree burn.
ATPV ATPV 9,8 9,8
The energy level where the heat from the Electric Arc is so high that it may cause a burn through the fabric.
cal/cm²cal/cm²
ATPV - The maximum incident energy the garment can withstand before the wearer would have 50% probability of a second degree burn.
EBTEBT 8,7 8,7
The energy level where the fabric breaks open and may cause a burn.
cal/cm²cal/cm²
EBT - The incident energy at which a 50% probability of a breakopen occurs resulting in a second degree burn.
Since ELIM indicates an energy value at 0% probability of a second degree burn and ATPV/EBT at 50% probability, the ELIM value is usually lower than ATPV/EBT. Large differences between the ELIM and ATPV/EBT results highlight the importance of wearing several layers of garments (such as in a Tranemo Skinsafe™ system) to ensure you are properly protected.
STANDARDS & SYMBOLS
FLAME RETARDANT
Box test EN 61482-1-2 The Box test method uses a constrained and direct arc, created by a short circuit in an open cabinet at a low voltage range (400V). The test is performed on fabric and protective clothing in the same way as for Open Arc. The result is stated as APC (Arc Protection Class) and divided into two classes: APC 1 (formerly Class 1) – 168kJ (4kA, 400V), APC 2 (formerly Class 2) – 320kJ (7kA, 400V) Unlike the Open Arc test, there is not a result scale in this garment tests, only two levels where the garment either passes or fails. A garment with one layer of Flame Retardant fabric usually passes APC 1 - even thin shirt fabrics. To pass APC 2, a system with two or three fabric layers or a lined garment is normally required. This makes it more difficult to adapt the protection to the risk, without compromising on comfort. As APC 1 is a relatively low level of protection, Tranemo always recommends a basic protection of at least 8 cal/cm², PPE2 (according to NFPA 70E).
RISK ASSESSMENT ELECTRIC ARC HAZARD Documents like NFPA 70E, ISSA Guidelines and DGUV-I 203-077 help to assess Electric Arc hazards from a practical perspective. The hazards of an Electric Arc include thermal effects from high heat, noise, pressure wave, shrapnel and flying debris, molten metal, optical damage, hearing damage and other effects. Therefore, it is important that any risk assessment considers all of these potential hazards. To achieve correct levels of protection, it is important that the whole body is protected with supporting Arc PPE i.e. helmet with protective screen, ear protection, arc gloves and safety shoes together with the correct Tranemo protective clothing. There are two accepted Electric Arc risk assessment standards used in Europe; the American NFPA 70E and the German DGUV-I 203-077. American standard for electrical safety in the workplace - NFPA 70E This is the American standard for electrical safety in the workplace and is a consensus standard on how to protect workers from the hazards of an Electric Arc. The standard is formed to help employees and workers to understand electrical hazards, help with: risk assessment, arc rated PPE selection and electrical safe working practices. When choosing workwear and other PPE as protection against Electric Arc risks, NFPA 70E states two methods; Incident Energy Analysis or Arc Flash PPE Category method. Which one to use depends on whether the incident energy that a worker may be exposed to has been calculated or not. Incident Energy Analysis in cal/cm² - NFPA 70E:2018 130.5 according to IEEE1584:2018 The strength of the protection must be greater than the force of the risk - meaning that the certified protection in cal/cm² must be greater than the Incident Energy Analysis in cal/cm². The table below shows what PPE should be worn and when: The risk of Electric Arc is 1,2-12 cal/cm²
The risk of Electric Arc is >12 cal/cm²
• Electric Arc approved jacket/trousers/boilersuit with long sleeves/ legs • Electric Arc approved helmet/visor with balaclava or Electric Arc hood with integrated visor • Electric Arc approved gloves, thick leather gloves or isolating gloves with leather cover • Protective glasses under a visor • Ear protection • Comprehensive heavy-duty protective leather footwear
• Electric Arc approved jacket/trousers/boilersuit with long sleeves/ legs • Electric Arc hood with integrated visor shall cover the face (Electric Arc approved helmet/visor with balaclava is not approved) • Electric Arc approved gloves (thick leather gloves or isolating gloves with leather cover is not approved) • Protective glasses under a visor • Ear protection • Comprehensive heavy-duty protective leather footwear
Arc Flash PPE Category method - NFPA 70E:2018 130.7 The Arc Flash PPE Category method is only used when the Incident Energy Analysis has not been calculated. In the Arc Flash PPE Category method, you compare your workplace with those listed in NFPA 70E 130.7 where a recommendation of which PPE category to choose is stated. This method is more insecure and may cause the user to wear unnecessarily thick and heavy clothing, protecting to a level much greater than that which is required. The Electric Arc protection for clothing is divided into four PPE categories: Risk Assessment acc. to Arc Flash PPE Category method (cal/cm²)
1,2-4
Requirement of the PPE Arc Rating (cal/cm²) Requirement of PPE category
4-8
8-25
25-40
>4
>8
> 25
> 40
PPE 1 / CAT 1 (4-8 cal/cm²)
PPE 2 / CAT 2 (8-25 cal /cm²)
PPE 3 / CAT 3 (25-40 cal /cm²)
PPE 4 / CAT 4 (>40 cal/cm²)
The table below shows what PPE that shall be worn: When the Electric Arc hazard requires use of PPE 1 or 2
When the Electric Arc hazard requires use of PPE 3 or 4
• Electric Arc approved jacket/trousers/boilersuit with long sleeves/ legs • Electric Arc approved helmet/visor with balaclava or Electric Arc hood with integrated visor • Electric Arc approved gloves, thick leather gloves or isolating gloves with leather cover • Protective glasses under a visor • Ear protection • Comprehensive heavy-duty protective leather footwear
• Electric Arc approved jacket/trousers/boilersuit with long sleeves/ legs • Electric Arc hood with integrated visor shall cover the face (Electric Arc approved helmet/visor with balaclava is not approved) • Electric Arc approved gloves (thick leather gloves or isolating gloves with leather cover is not approved) • Protective glasses under a visor • Ear protection • Comprehensive heavy-duty protective leather footwear
27
28
FLAME RETARDANT
STANDARDS & SYMBOLS
Letter of conformance - NFPA 70E / EN 61482-2 Tranemo has (in collaboration with ArcWear, an accredited testing institute in the USA) produced a conformance letter showing that our PPE, when certified according to EN 61482-2, meets the requirements of the American standard NFPA 70E. The letter confirms that Tranemo’s CE-marked Electric Arc garments can also be used in the US market. German standard for risk assessment according to DGUV-I 203-077 and risk calculations according to BGI/GUV-I 5188 The German standard is based on a risk assessment according to DGUV-I 203-077 and risk calculations according to BGI/GUV-I 5188. According to the standard, the protective clothing is tested according to EN 61482-1-2 Box test with a limited and direct arc created by a short circuit in an open cabinet. The test is performed in a low voltage range (400V).
Tranemo Skinsafe™ Wearing several layers of Electric Arc protective clothing significantly increases protection, due to the formation of air gaps between the garment layers due to the fact that air has low electricity conductivity. It is important to understand that the total protective value of a multi-layer system cannot be calculated by simply adding energy values from the individual garments. To determine the energy value of a multi-layer system, an Electric Arc test (corresponding to the way the garments would be worn in reality) must be carried out on a mannequin with the relevant garments layers. We call our tested multi-layer systems Tranemo Skinsafe™, which provides a greater opportunity to choose the right protective clothing based on your risk assessment. As noted in NFPA 70E, and from experience in Tranemo Skinsafe™ tests, multiple layers of Electric Arc protective clothing are an effective way to achieve the protection required with the lowest combined weight. The use of a layering system therefore provides higher levels of comfort for the wearer and ensures that the correct protective clothing is always used. ASTM F1959 The American performance standard for Electric Arc fabrics is called ASTM F1506 where fabric specifications also include the Open Arc test ASTM F1959. This standard is similar to the European test method IEC 61482-1-1 for fabric and garments. The biggest difference of the American standard compared to the European standard is the Char Length test - where a maximum char length is determined. The test is done after 25 washes and to pass, the char length it is allowed to be a maximum of 152 mm after 12 s exposure. Tranemo has tested our fabrics that are developed principally for working with electricity - Tera TX and Aramid 6.4FC. The test provides a useful indication of the fabrics Flame Retardant properties in an Electric Arc accident. Electrical insulating protective clothing against Electric shock or clothing for work intentionally using an Electric Arc (such as arc welding and plasma torch cutting) IS NOT covered by the European EN 61482-2 standard.
EN 1149-5 Protective clothing with Electrostatic properties This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. To certify garments to this standard, the Anti-static properties of the fabric are tested according to EN 1149-1 (surface resistance), or EN 1149-3 (charge decay). The design of the garment is also a parameter in the certification and CE marking of Anti-static/ATEX garments. With Anti-Static properties and the right design of the garment, you can remove the source of ignition and minimise the risk. ATEX-environments are divided into different zones with different levels of risks. Anti-static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. Atex zone classifications for gas, mist and vapours
Atex zone classifications for dust
Zone 0
Environment where a mixture of air and flammable gas, mist or vapour occurs often and persists for long periods of time.
Zone 20 Environment where explosive clouds of dust appear often and for extended periods.
Zone 1
Environment where a mixture of air and flammable gas, mist or vapour is likely to occur under normal conditions.
Zone 21 Environment where explosive clouds of dust can appear under normal conditions.
Zone 2
Environment where a mixture of air and flammable gas, mist or vapour can occur under normal conditions but dilutes quickly.
Zone 22 Environment where explosive clouds of dust are not likely to appear and if they do, disappears quickly.
STANDARDS & SYMBOLS
FLAME RETARDANT
EN ISO 11612 Protective clothing to protect against heat and flame This standard specifies PPE Clothing when working where there is a risk that the garments will come into contact with heat and flame and it is the base level of protection for all Tranemo FR garments. For full body protection, the protective clothing system shall cover neck, torso, arms and legs with a single garment (a boilersuit) or a two-piece garment system (combination of jacket and trousers certified to the same level). Even an accessory, for example welding protection such as aprons and sleeve protection, can be certified for EN ISO 11612 if tested and used together with other full-coverage garments with the same certification. The standard is divided into different categories, where the code letters show which heat and flame requirements the garment needs to fulfill. At least two categories must be tested to be able to CE mark the garments. Code letter A1 or A1+A2 plus at least one other code letter (B, C, D, E or F) is mandatory and the result is included on the CE label, together with this symbol. The code letters are classified in different levels, where the highest number is the highest tested level. The design of the garment is also a parameter in the CE marking for heat and flame garments. FR garments certified according to EN ISO 11612 B3, C2-C4, D2-D3, E2-E3 and F3 come under PPE Regulation Category III. A1, A2
Requirements for limited flame spread; A1: Surface ignition. A2: Edge ignition.
B (1-3)
Protection against convective heat and open flames
C (1-4)
Protection against radiant heat
D (1-3)
Protection against molten aluminium splash
E (1-3)
Protection against molten iron splash
F (1-3)
Protection against contact heat
EN ISO 14116 Protective clothing with lower level of Flame Retardant protection. The standard is often used for PPE clothing and accessories with lower level Flame Retardant protection, such as High-Visibility vests, rainwear, t-shirts with short sleeves and socks. It is divided into three classes, where index 3 is the highest level. Index 3 garments should be worn in combination with EN ISO 11612 garments. (It is important to note that Index 1 garments should not be worn next to the skin. This standard does not have a dedicated Symbol/Pictogram. Tranemo uses the flame symbol to indicate it is a FR garment/FR accessories.
LOI - Limited Oxygen Index LOI means the minimum concentration of oxygen (expressed as a percentage) that would be required to support combustion of a fabric. It determines the protection of the garment regarding relative flammability and should be over 25%. Tranemo test the LOI value on our fabrics and show this on the outside FR label. The LOI value is one way to indicate the level of FR protection a garment provides and it makes it easier for the user to compare and choose the right level of protection. LOI level depends on the FR fibre/fibre combination and the fabric weight. Tranemo does flame tests on every batch before production to ensure the high level of protection that we expect on all our fabrics is consistent. Example of LOI values: Normal cotton 18%, Polyester/Nylon 20-22% Wool 25% Chemically treated FR cotton 28%
Tranemo Fabric
LOI
811 812 821 822 830 / 832 846 850 862 863 864 873 875 882 / 883 884 885 891 892 895 897 899 901 903 904 905 911 / 912 920 943 950 / 951 955
29,8% 29,8% 27,5% 29,5% 28,0% 30,1% 29,4% 28,9% 28,9% 28,9% 25,9% 27,8% 32,3% 29,5% 29,0% 25,4% 28,3% 26,0% 26,1% 26,5% 27,7% 28,7% 27,7% 28,7% 26,7% 30,1% 25,5% 29,5% 29,5%
Tera TX Cantex Pro 260 Edge HVO Edge 350 IR Apex Ara TX Denim Stretch 1.0 Outback 250 Outback HW Outback J220 Magma C Magma S Cantex 2.0 Cantex Stretch Cantex Weld Cantex Dual 220 Cantex Dual 320 Cantex Jersey AT Cantex Pique Cantex Terry Merino RX Merino TX Merino JX Merino FX Tera TX Light Cantex JX Mega TX 260IR Windtech FR 340 Windtech FR 550
29
30
FLAME RETARDANT
STANDARDS & SYMBOLS
EN ISO 11611 Protective clothing for use in welding and allied processes This standard specifies PPE Clothing used in welding work or allied processes where you have the risk of spatter (small splashes of molten metal), short contact with flame, radiant heat from the arc, and risk of electric shock by short-term, accidental contact with live electrical conductors (at voltages up to approximately 100 V DC in normal conditions of welding). The standard is divided in two different classes with different levels of protection. The welding function of the fabric is tested with 15 drops (class 1) or 25 drops (class 2) of molten metal. The design of the garment is also a parameter in the CE marking of welding garments. Class
1
2
Description
Number of tested drops
Radiant heat, RHTI24 (Reaction time, seconds)
Electrical resistance Ω
15
≥7
> 105
25
≥ 16
> 105
Protection against less hazardous welding techniques and situations, causing lower levels of spatter and radiant heat. Protection against more hazardous welding techniques and situations, causing higher levels of spatter and radiant heat.
EN 13034 Type PB [6] Protective clothing against liquid chemicals This standard specifies PPE Clothing used where there is a risk of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes when complete liquid permeation barrier (at a molecular level) is not required. In accordance to the standard EN 13034 the following chemical groups/chemicals can be tested: Chemical group Acid Alkaline Aromatic Hydrocarbon Alcohol
Chemical H2SO4 30% (Sulphuric acid) NaOH 10% (Sodium hydroxide also called lye and caustic soda) O-xylene Butanol
The result is given in scale 1-3 where the maximum value is 3. To pass the test and be able to use the EN 13034 symbol in the CE-marking, at least one chemical shall obtain level 3 for liquid repellency and at least one chemical shall obtain level 2 for resistance to penetration. The design of the garment is also a parameter in the CE marking for chemical protection garments.
Test result for fabric (class)
885 Cantex Weld
884 882,883 Cantex Cantex Stretch 2.0
PFAS-free PFAS-free PFAS-free
931 Cantex 240IR
811 Tera TX
812 Tera TX TW
863 862 943 Outback Outback Mega TX HW 250 230IR
846 Ara TX
PFAS-free
955 950 Windtech Windtech FR550 FR340
830 Apex
821 Edge PFAS-free
The material’s ability to repel chemicals Acid H2SO4 (30%) 3
3
3
3
3
3
3
3
3
3
3
3
3
3
Alkaline
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Aromatic Hydrocarbon O-xylene
-
-
-
-
-
-
-
-
-
-
-
-
2
-
Alcohol
-
-
-
-
-
-
-
-
-
-
-
-
2
-
The material’s ability to resist penetration by chemicals Acid H2SO4 (30%) 3 3 3 Alkaline
Na OH (10%) Butanol
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Aromatic Hydrocarbon O-xylene
-
-
-
-
-
-
-
-
-
-
-
-
3
-
Alcohol
-
-
-
-
-
-
-
-
-
-
-
-
3
-
Na OH (10%) Butanol
”-” Chemicalgroup/chemical not tested/does not pass the test.
If your company only requires protection against acid or alkaline, you can advantageously choose a fabric with a PFAS-free finish. A PFAS-free finish does not contain the fluorine-carbon bond, that is very difficult for nature to break down, making the product a better and more environmentally friendly choice. If your company instead requires protection against O-xylene or butanol, you need a fabric with a PFAS finish. Contact Tranemo if you are not sure which protection your company needs.
STANDARDS & SYMBOLS
FLAME RETARDANT
For more information on Tranemo’s combined certifications, visit tranemo.co.uk
EN ISO 20471 High Visibility clothing
This standard specifies PPE Clothing used where the wearer needs to be visible at day and night and where there is a risk from moving vehicles or processes. This standard has three different levels covering three different risks and the maximum level is class 3. The figure by the symbol indicates the area of fluorescent and reflective material within the garment. To certify and CE mark the garment with this symbol, it has to achieve one of these levels. The design of the garment is also a parameter in the CE marking of High Visibility garments. Material area in m²
Class 1
Class 2
Class 3
Fluorescent
0,14
0,50
0,80
Reflective
0,10
0,13
0,20
Combined certification - Class 3 system If a garment doesn´t reach EN ISO 20471 class 3, it can be combined with other Tranemo High Visibility garments to reach the highest class of certification - a Class 3 system. For example, a jacket that only reaches class 2 can be worn together with a class 1 or class 2 trousers / bib & brace to reach a Class 3 system. A number of Tranemo jackets and T-shirts are approved to different EN ISO 20471 classes for various sizes and they can also be combined to a Class 3 system for all sizes. If a garment is certified as a Class 3 system, it is indicated in the product description of the garment. It is also indicated on the inside CE-label of the garment.
RIS-3279-TOM ISSUE 2 Railway Group High Visibility Standard for UK This UK High Visibility standard is based on the European standard EN ISO 20471. It requires that the area of fluorescent and reflective materials of the garments reaches at least EN ISO 20471 class 2. RIS-3297-TOM only approves specific orange High Visibility materials.
EN 342 Protective clothing against cold This standard specifies PPE Clothing used when working in cold environments. It requires tests of resultant effective thermal insulation (value in m²K/W), air permeability (shown as class 1-3) and resistance to water penetration (shown as class 1-2). The garment ensemble (i.e. two piece combination or boilersuit) must achieve results on thermal insulation and air permeability to be CE marked with the EN 342 symbol – the water penetration test is optional. The garments are tested as a 3-layer system, together with standard underwear.
EN 343 Protective clothing against rain This standard specifies PPE Clothing used for working in rain or snow, fog and ground humidity. According to the latest version of the standard, EN 343:2019, the garment and seams are tested for water penetration (waterproofness) class 1-4 and water vapour resistance (breathability) class 1-4, where class 4 is the highest level. The garment must achieve a result on both tests to be CE marked with the EN 343 symbol.
EN 13758-2 Protection against UV radiation Standard for the classification and marking of long sleeve garments that give the wearer UVA + UVB protection over 40UPF (Ultraviolet Protection Factor. Tranemo 50+). All textiles offer protection for the wearer against the sun and risk of sun burn depending on the thickness of the fabric - this standard indicates that the protection is high. Test method for fabric is EN 13758-1.
31
32
FLAME RETARDANT
STANDARDS & SYMBOLS
PROTECTIVE GLOVES Protective gloves are certified and tested according to different standards to provide the user with information so that the right glove with the right protection for the specific working area can be chosen. When working in areas such as electricity & power generation, maintenance and infrastructure, there can be a risk of Arc Flash. The Electric Arc creates a massive heat radiation that can burn the skin. The hot air from the arc explosion can reach up to 10 000°C, which poses a high risk of significant burns. The intense heat can ignite the glove, so it is important that the gloves protects against ignition and melting. The hands are one of the most exposed parts of the body when working with electricity. Tranemo recommends: •
Use the gloves! Hands are the most exposed part of the body!
•
Use dry gloves! Moist or wet gloves might cause steam that will reduce the protection significantly.
•
Worn down gloves gives a reduced protection.
•
Use clean gloves! The gloves are Flame Retardant but oil and dirt on the gloves might still burn.
•
It is a good idea to bring an extra pair of gloves if one pair should be wet or dirty during the work day.
•
Use the correct size! Good fitting gloves will reduce risk of entangling during work.
•
Let other protective workwear overlap the gloves at the wrists.
EN 407 Protective gloves against thermal risks (and /or fire)
EN 420 / EN ISO 21420 General requirements and test methods for protective gloves
The standard is used for protective gloves which protect the hands against heat and/or flame; fire, contact heat, convective heat, radiant heat, small splashes or large quantities of molten metal. Every risk that is tested gives a result divided into different levels and the symbol of the standard is supplemented with the terms below.
This standard defines the general requirements and relevant test procedures for glove design and construction, resistance of glove materials to water penetration, innocuousness, comfort and efficiency, marking and information supplied by the manufacturer.
EN 407 ABCDEF
Code
Explanation of terms
A
Burning behaviour
How flammable is the glove, does the material melt, how fast does the flame go out? Measure the time for an open flame and glow to extinguish after the source of ignition is removed, 1-4. (level 3 or 4 is classified as Flame Retardant)
B
Contact heat
The glove should insulate against contact heat and must not melt. The test measures the exposure to hot object with limited heating of hand during 15s, 1-4. (level 1=100°C, level 2=250°C, level 3=350°C, level 4=500°C)
C
Convective Heat
The glove should insulate against convective heat and prevent penetration of hot air or steam. The test measures the time for harmful heat penetration, 1-4. (4 is the highest level)*
D
Radiant heat
The glove can reflect or absorb heat radiation and the skin should be protected from impact. The test is calculated at 20 kW/m² and results in level 1-4. (4 is the highest level)*
E
Small splashes of molten metal
Test with small splashes of molten metal, 1-4 (4 is the highest level)*
F
Large splashes of molten metal
Test with large splashes of molten metal, 1-4 (4 is the highest level)*
*X indicates that the test is not performed.
EN 388 ABCDEF
EN 388 Protective gloves against mechanical risks
This standard defines the mechanical performance and relevant test of the protective glove. The glove is tested for abrasion resistance, cut resistance, tear resistance, puncture resistance and impact protection. Every risk that is tested gives a result divided into different levels and the symbol of the standard is supplemented with the terms below. Code
Explanation of terms
A
Abrasion resistance
1-4 (4 is the highest level)
B
Cut resistance (coup test), optional older test
1-5 (5 is the highest level). X indicates that the test is not performed
C
Tear resistance
1-4 (4 is the highest level)
D
Puncture resistance
1-4 (4 is the highest level)
E
Cut resistance ISO 13997
A-F (F is the highest level). A=2N, B=5N, C=10N, D=15N, E=22N, F=30N
F
Impact Protection
Indicated only if the test has been performed. P=achieved
ATPV value for protective gloves Protective gloves tested to ASTM F2675, is performed to determine the Arc Rating (ATPV or EBT) of a glove. EN 61482-1-2, Box test This Electric Arc test provides a pass or fail at the two below test settings: APC 1 - 168kJ (4kA, 400V) APC 2 - 320kJ (7kA, 400V) The test is modified for gloves, as gloves are not included in this standard and test method.
ANSI CUT LEVEL
ANSI CUT American standard for cut resistance
As a complement to the European standard Eureka use the ANSI test for cut resistance. This is to achieve a higher result span, A1-A9. The result is given in Newton’s. The test method is the same as the ones in EN 388.
STANDARDS & SYMBOLS
FLAME RETARDANT
HELMETS Helmets are certified and tested according to different standards to provide the user with information in order that the correct helmet with the right protection for the specific working area can be chosen. Tranemo recommends: • • • • •
Use the helmet in conjunction with your protective clothing and make sure it is firmly positioned on the head. When not in use, store the helmet at the correct temperature (5°C - 35°C). Do not use the helmet when working if the helmet or other component (shell, visor, adjusters or chin straps) is damaged or dirty. A wet or damp helmet should be dried thoroughly before use. The helmet has a limited lifespan and must be replaced before the expiration date has passed. Lifespan information can be found on the back of the helmet.
EN 397 - Standard for industry helmets The standard specifies requirements for materials and performance, test methods and labeling requirements for industrial safety helmets. The mandatory requirements apply to helmets for general use in industry. There are some optional additional performance requirements that the helmet manufacturer can choose to specify. Industrial safety helmets are primarily intended to provide the wearer with protection against falling objects, where consequential damage to the head or skull fracture is a risk. Helmets certified according to EN 397 must meet the requirements for falling objects, penetration of sharp objects, flame and triggering chin straps.
EN 50365 - Standard for electrically insulated helmets for use in low voltage installations This optional test ensures reliable protection against electric shock up to AC 1000V or DC 1500V. The voltage used for this test is 10,000V. Helmets approved according to EN 50365 must be marked with the triangle symbol and ”Electrician class 0” inside the shell. Helmet approved according to EN 50365: • Protects against electric shock and dangerous electric current through the head. • Protects against alternating voltage up to 1000 V (AC) or voltage up to 1500 V (DC) • May not contain any conductive parts if the helmet is insulating. • Do not have air vents that can cause accidental contact with live parts. • Must meet the requirements in accordance with EN 397.
EN 166 - Standard for eye protection The standard specifies functional requirements for all types of eye protection. The standard deals with general considerations concerning eye protection, such as design, classification, basic requirements, special requirements and additional requirements, test methods, labeling and information to the user. • • • • •
Eye protection should be free from protruding parts, sharp edges or other defects, which are likely to cause discomfort or damage during use. No parts of the eye protection that come into contact with the wearer should be made of materials that are known to cause skin irritation. Headbands must be at least 10 mm wide over all parts that may come into contact with the wearer’s head. Headbands must be adjustable or self-adjusting. Glasses approved according to EN 166 must be tested according to: - EN 167 Optical test - This includes tests for field of view, transmission and diffusion as well as refractive properties - EN 168 Robustness and resistance to heat, ignition and corrosion. There are two robustness tests - ”minimal robustness” and ”increased robustness” - EN 170 - Requirements for filters against UV radiation
Arc Rating value for visor ASTM F2178 (Open Arc) - Test method to determine the visor’s Arc Rating (ATPV or EBT). GS-ET-29E (Box Test) - Test method and certification of face protection This arc test results in a pass or fail result according to the following settings: APC 1 - 168kJ (4kA, 400V) APC 2 - 320kJ (7kA, 400V) The test methods correspond to EN 61482-1-2 Box test, but are modified to suit face protection.
33
FLAME RETARDANT
34
SHELL FR
SHELL FR SHELL FR is Tranemo’s Inherent Flame Retardant range for all weather conditions. All garments have taped seams and are made of a lightweight polyester free, wind and waterproof material according to EN 343. The base of the fabric is viscose which is a natural fibre. This together with the special weave, gives the garments a comfortable and a smooth feel. Excellent breathability in the membrane lining also allows the wearer to use the garment all day and be able to work comfortably and safely even when extreme movement is needed. Being a polyester free FR garment the fabric structure remains stable when in contact with small metal splashes - ideal if you need to do occasional welding in your shell garment, the shell garments are lined with a thin mesh together with a Cantex lining to make them light, airy and comfortable to wear. A shell garment is perfect for use all year long since the user can decide on clothes to wear underneath according to temperature, protection and activity. The shell garments have a high ELIM value - 20 cal/cm², PPE 2 and when you combine it in a 3 layer system with Flame Retardant garments, you are able to reach an even higher level of protection. Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or at tranemo.co.uk.
The products on this section are certified according to:
943: Mega TX 230IR, 230 g/m², LOI: 25,5% 804: Reinforcing fabric, HTFR Dobby, 295 g/m²
c95mt
NEW EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
**EN ISO 11611 CL.1 A1
**EN ISO 11611 CL.1 A1
EN ISO 11611 CL.1 A1
**EN 13034 type PB[6]
**EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (S-XL)
EN ISO 20471 CL.3 CL.2* (S-XL)
EN ISO 20471 CL.2 CL.1 (S-M)
EN 343 3.3
EN 343 3.3
EN 343 3.3
5137 94 FLAME RETARDANT LADIES SHELL JACKET
Non-Metal and Inherent Flame Retardant ladies shell jacket with taped seams and mesh lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 943, 804, 805, 911
* For complete information regarding product certifications, visit tranemo.co.uk
5138 94 FLAME RETARDANT LADIES SHELL JACKET + LINING 9129
Non-Metal and Inherent Flame Retardant ladies shell jacket with taped seams and mesh lining. Comes with sleeveless fibrefur lining 9129 06. Wind and waterproof according to EN 343. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 943, 804, 805, 911
5139 94 FLAME RETARDANT LADIES SHELL TROUSERS
Non-Metal and Inherent Flame Retardant ladies shell trousers with taped seams and mesh lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 943, 804, 805, 911
SHELL FR
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
**EN ISO 11611 CL.1 A1
**EN ISO 11611 CL.1 A1
**EN 13034 type PB[6]
**EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (XS-S)
EN ISO 20471 CL.3 CL.2* (XS-S)
EN 343 3.3
EN 343 3.3
5135 94 FLAME RETARDANT SHELL JACKET
Non-Metal, Inherent Flame Retardant shell jacket with taped seams and mesh lining. Comes with sleeveless fibrefur lining 9128 06. Wind and waterproof according to EN 343.
XS-4XL 94 yellow/navy 943, 804, 805, 911
Size: Colour: Quality:
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 25,0 cal/cm² ATPV: 25,0 cal/cm²
EN 61482-2 APC 2 ELIM: 25,0 cal/cm² ATPV: 25,0 cal/cm²
EN 1149-5
EN 1149-5
**EN ISO 11611 CL.1 A1
**EN ISO 11611 CL.1 A1
**EN 13034 type PB[6]
**EN 13034 type PB[6]
EN ISO 20471 CL.3
EN ISO 20471 CL.3
EN 343 3.1
EN 343 3.1
*EN 342 (5118+5122)
5118 94 FLAME RETARDANT PARKA
*EN 342 (5119+5122)
Non-Metal and Inherent Flame Retardant quilted parka with taped seams. Wind and water resistant fabric according to EN 343. Size: Colour: Quality:
35
5136 94 FLAME RETARDANT SHELL JACKET + LINING 9128
Non-Metal and Inherent Flame Retardant shell jacket with taped seams and mesh lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
FLAME RETARDANT
XS-4XL 94 yellow/navy 943, 804, 805, 911, 060
5119 94 FLAME RETARDANT PARKA + LINING 9128
Non-Metal, Inherent Flame Retardant quilted parka with taped seams. Comes with sleeveless fibrefur lining 9128 06. Wind and water resistant fabric according to EN 343.
XS-4XL 94 yellow/navy 943, 804, 054
Size: Colour: Quality:
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 25,0 cal/cm² ATPV: 25,0 cal/cm²
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
*EN ISO 11611 CL.1 A1
EN ISO 11611 CL.1 A1
*EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.3
EN ISO 20471 CL.2 CL.1 (XS-S)
EN 343 3.1
EN 343 3.3
XS-4XL 94 yellow/navy 943, 804, 054, 060
**EN 342
5111 94 FLAME RETARDANT WINTER BOILERSUIT
Non-Metal and Inherent Flame Retardant winter boilersuit with taped seams and quilted lining. Wind and waterproof according to EN 343. The boilersuit is ergonomically shaped for work with raised arms. Size: Colour: Quality:
XS-4XL 94 yellow/navy 943, 804, 054, 893
* For complete information regarding product certifications, visit tranemo.co.uk
5132 94 FLAME RETARDANT SHELL TROUSERS
Non-Metal and Inherent Flame Retardant shell trousers with taped seams and mesh lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
XS-4XL 94 yellow/navy 943, 804, 805, 911
36
FLAME RETARDANT
SWITCH
SWITCH SWITCH increases safety for those who work in electrical systems with high energy levels - for example when breaking the power in switchgear or larger battery units. With SWITCH, Tranemo has a comprehensive system for Electric Arc protection and the range is developed to provide the body extremely high protection against an Electric Arc. With EN 61482-2 APC 2, ELIM 40 cal/cm² and EBT 44 cal/cm², SWITCH achieves the highest protection category against Electric Arc accidents (PPE 4 NFPA 70E). SWITCH enables fast and flexible adaptation depending on the risk level and need for protection based on the current work situation. The softshell coat is easily worn on top of other garments as a basic protection for shorter tasks. For more time-consuming work, the arc-protection softshell jacket is recommended together with the softshell trousers. The softshell fabric used in the protective clothing is soft, flexible and wind and water repellent, which makes them both comfortable and functional. The collection also offers head protection against Electric Arc accidents, with a helmet, visor and hood as a certified system. Together with suitable accessories, you get a comprehensive full body protection against Electric Arc. Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or at tranemo.co.uk. 955: Windtech FR 550, 550 g/m², wind and water resistant
c95mt
EN ISO 11612 A1 B2 C2 F2 IEC 61482-2 APC 2 ELIM: 40,0 cal/cm² EBT: 44,0 cal/cm² EN ISO 11612 A1 B2 C2 F2
EN ISO 11612 A1 B2 C2 F2
EN 1149-5
IEC 61482-2 APC 2 ELIM: 40,0 cal/cm² EBT: 44,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 40,0 cal/cm² EBT: 44,0 cal/cm²
EN 13034 type PB[6]
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (XS-S)
5195 95 FLAME RETARDANT SOFTSHELL JACKET
Non-Metal and Inherent Flame Retardant softshell jacket that reaches PPE category 4 (higher than 40 cal/cm²). Size: Colour: Quality:
XS-4XL 94 yellow/navy 955
* For complete information regarding product certifications, visit tranemo.co.uk
5193 95 FLAME RETARDANT SOFTSHELL COAT
Non-Metal and Inherent Flame Retardant coat with velcro closing for ”quick release” that reaches PPE category 4 (higher than 40 cal/cm²). Size: Colour: Quality:
S, L, XXL, 4XL 94 yellow/navy 955
5194 95 FLAME RETARDANT SOFTSHELL TROUSERS
Non-Metal and Inherent Flame Retardant softshell trousers that reach PPE category 4 (higher than 40 cal/cm²). Size: Colour: Quality:
XS-4XL 94 yellow/navy 955
SWITCH
9179 95 ELECTRIC ARC HOOD
SA00 01 ELECTRIC ARC HOOD + VISOR + HELMET ASTM F2178 ATPV 40 cal/cm²
Combined set with Electric Arc hood 9179, integrated lift-front visor RX0018 and helmet with chin strap.
EN ISO 11612 A1 B2 C2 F2
Size: Colour:
EN 1149-5
One size 03 navy
9195 89 FLAME RETARDANT BALACLAVA
Inherent Flame Retardant Electric Arc hood for helmet and face shield. Made in softshell fabric with high arc protection. Size: Colour: Quality:
FLAME RETARDANT
EN ISO 11612 A1 B1 C2 F1 EN 1149-5
Soft balaclava with high protection against Electric Arc. Sewn in double tricot with ELIM: 22,0 cal/cm², EBT: 27,0 cal/cm², APC 2. 20% recycled cotton. PFAS-free. Size: Colour: Quality:
One size 03 navy 955
One size 03 navy 899, 895
NEW RX00 18 ELECTRIC ARC VISOR GS-ET-29 APC 2
Highly transparent 3Phase® Arc Flash protection lift-front visor. Size: Colour:
One size 00 multi-colour
EN ISO 11612 A1+A2 B1 C2 F1 EN 61482-2 APC 2 GS-ET-29 APC 2 EN ISO 11611 CL.2 A1+A2
RX00 22 FLAME RETARDANT NECK AND EAR COVER FOR HELMET Flame Retardant and Anti-Static neck and ear cover to be attached to helmet RX0001 or RX0021. Size: Colour:
One size 03 navy
37
FLAME RETARDANT
STRETCH FR
STRETCH FR Stretch FR offers protective work clothing for the Power and Utility industry and offers some of the most innovative and comfortable garments available today. The Flame Retardant stretch trousers bring comfort to a whole new level – with a modern design, comfortable fit and many practical features. The stretch fabric is based on an Aramid fabric combined with a high level of stretch fibre - giving you an extremely flexible and comfortable garment that will perform well in industrial laundry processes and offer very high levels of FR protection. The clothing passes EN ISO 11612 A2 (edge ignition), which is unique for protective clothing with stretch. The softshell jackets are sewn in a soft and flexible wind and water resistant softshell fabric and offer impressive protection against Electric Arc at PPE 3 level. If additional protection is required, the softshell jackets can be used together with two additional layers, according to our certified Tranemo Skinsafe™ system, which gives an impressive ELIM value of as much as 63 cal/cm² (PPE 4). In combination with the stretch trousers, the user will have a complete and comfortable system. The whole range is available in both men’s and ladies sizes and with both increased visibility options or full High Visibility options according to EN ISO 20471.
40
APC
SHIELD
35
ATPV (cal/cm²)
5233 95 93
ELIM (cal/cm²)
6372 89 94
WINTER SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
951 WINDTECH FR HVO ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm², PPE 2
895 CANTEX JERSEY AT ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm², PPE 1
2
TRANEMO SKINSAFE™
20
SHIELD
14
ATPV (cal/cm²)
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
Visit tranemo.co.uk to see more Tranemo Skinsafe™ systems
5281 84 93
ELIM (cal/cm²)
6312 90 07
ZENITH SYSTEM SKIN PROTECTION
38
846 Ara TX ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm², PPE 1
STRETCH FR
FLAME RETARDANT
39
The products on this section are certified according to: EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1
EN ISO 11611 CL.2 A1
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (S-M) TRANEMO SKINSAFE
5219 95 FLAME RETARDANT LADIES SOFTSHELL JACKET Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis ladies softshell jacket with very high comfort. Size: Colour: Quality:
EN ISO 20471 CL.3 CL.2* (XS-S) TRANEMO SKINSAFE
Ladies S-XXL 93 orange/navy 951, 950, 804
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 1149-5
EN 1149-5
*EN ISO 20471 CL.2 CL.1 (S-L)
*EN ISO 20471 CL.2 CL.1 (XS-L)
5267 95 FLAME RETARDANT LADIES SOFTSHELL WAISTCOAT
Non-Metal, wind and water resistant Inherent Flame Retardant softshell waistcoat. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy 951, 950, 804
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2
EN ISO 20471 CL.2
RIS-3279-TOM
RIS-3279-TOM
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5281 84 FLAME RETARDANT STRETCH TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.
Ladies 6-20 93 orange/navy 846, 811, 852, 804
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 20471 CL.2
RIS-3279-TOM
RIS-3279-TOM
RIS-3279-TOM
TRANEMO SKINSAFE
TRANEMO SKINSAFE
TRANEMO SKINSAFE
Size: Colour: Quality:
Ladies 6-20 93 orange/navy 846, 811, 852, 804
XS-4XL 93 orange/navy 951, 950, 804
5286 84 FLAME RETARDANT LADIES STRETCH TROUSERS Non-Metal and Inherent Flame Retardant ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.
Non-Metal and Inherent Flame Retardant Hi-Vis maternity trousers with stretch for excellent fit. Knitted fabric and buttonhole elastic at the top allowing for different stages of the pregnancy. The trousers have specific stretch areas and a wide elastic band in the back and increased comfort ensuring full mobility at work.
XS-4XL 93 orange/navy 951, 950, 804
5263 95 FLAME RETARDANT SOFTSHELL WAISTCOAT
Non-Metal, wind and water resistant Inherent Flame Retardant ladies softshell waistcoat.
5291 84 FLAME RETARDANT MATERNITY STRETCH TROUSERS
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis softshell jacket with very high comfort. The jacket is ergonomically shaped for working with raised arms. Size: Colour: Quality:
EN ISO 11612 A1 B1 C1 F1
Size: Colour: Quality:
5233 95 FLAME RETARDANT SOFTSHELL JACKET
30”- 50”R, 32”- 40”T, 28”- 48”S 93 orange/navy 846, 811, 852, 804
5297 84 FLAME RETARDANT LADIES CRAFTSMAN STRETCH TROUSERS
5294 84 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.
* For complete information regarding product certifications, visit tranemo.co.uk
Ladies 6-20 93 orange/navy 846, 811, 852, 804
Non-Metal and Inherent Flame Retardant trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. 30”- 50”R, 32”- 40”T, 28”- 48”S 93 orange/navy 846, 811, 852, 804
40
FLAME RETARDANT
STRETCH FR HIGH VISIBILITY
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1
EN ISO 11611 CL.2 A1
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (XS-S) TRANEMO SKINSAFE
5145 95 FLAME RETARDANT SOFTSHELL JACKET
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis softshell jacket with very high comfort. Size: Colour: Quality:
EN ISO 20471 CL.3 CL.2* (S-M) TRANEMO SKINSAFE
XS-4XL 94 yellow/navy 950, 804
The products on this section are certified according to:
5149 95 FLAME RETARDANT LADIES SOFTSHELL JACKET
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis ladies softshell jacket with very high comfort. Size: Colour: Quality:
*EN ISO 11612 A1 B1 C1 F1
*EN ISO 11612 A1 B1 C1 F1
*IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
*IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
EN 1149-5
EN 1149-5
**EN ISO 20471 CL.2 CL.1 (XS-L)
**EN ISO 20471 CL.2 CL.1 (S-L)
Ladies S-XXL 94 yellow/navy 950, 804
5165 95 FLAME RETARDANT SOFTSHELL WAISTCOAT
5169 95 FLAME RETARDANT LADIES SOFTSHELL WAISTCOAT
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis softshell waistcoat.
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis ladies softshell waistcoat.
XS-4XL 94 yellow/navy 950, 804
Ladies S-XXL 94 yellow/navy 950, 804
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6321 81 FLAME RETARDANT STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
TRANEMO SKINSAFE
6326 81 FLAME RETARDANT LADIES STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852, 804
Ladies 6-20 94 yellow/navy 811, 852, 804
6396 81 FLAME RETARDANT MATERNITY STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back. Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2 CL.1 (30”S)
EN ISO 20471 CL.2 CL.1 (6-8)
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6324 81 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS
6327 81 FLAME RETARDANT LADIES CRAFTSMAN STRETCH TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant HiVis trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. 30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852, 804
* For complete information regarding product certifications, visit tranemo.co.uk
Non-Metal and Inherent Flame Retardant ladies trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Ladies 6-20 94 yellow/navy 811, 852, 804
Ladies 6-20 94 yellow/navy 811, 852, 804, 050
STRETCH FR HIGH VISIBILITY
FLAME RETARDANT
41
68
895 CANTEX JERSEY AT ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm², PPE 1
SHIELD 899 CANTEX TERRY ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm², PPE 2
5145 95 94
63
ATPV (cal/cm²)
5030 89 94
ELIM (cal/cm²)
6372 89 94
SKIN PROTECTION
WINTER SYSTEM
INSULATION
TRANEMO SKINSAFE™
950 WINDTECH FR 340 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm², PPE 3
TRANEMO SKINSAFE™
19
APC
2
SHIELD
17
ATPV (cal/cm²)
6321 81 94
ELIM (cal/cm²)
5930 92 03
SKIN PROTECTION
TERA TX SYSTEM
920 CANTEX JX ARC RATING: 7,0 cal/cm² PPE 1
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
TRANEMO SKINSAFE™
22
APC
2
SHIELD
14
ATPV (cal/cm²)
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
6321 81 94
ELIM (cal/cm²)
6312 90 07
SKIN PROTECTION
TERA TX SYSTEM
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
EN ISO 20471 CL.1
EN ISO 20471 CL.1
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6398 81 FLAME RETARDANT MATERNITY STRETCH TROUSERS
Size: Colour: Quality:
TRANEMO SKINSAFE
6328 81 FLAME RETARDANT LADIES STRETCH TROUSERS
6322 81 FLAME RETARDANT STRETCH TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.
Non-Metal and Inherent Flame Retardant maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back.
Visit tranemo.co.uk to see more Tranemo Skinsafe™ systems
Non-Metal and Inherent Flame Retardant trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.
Ladies 6-20 94 yellow/navy 811, 852, 804
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852, 804
Ladies 6-20 94 yellow/navy 811, 852, 804, 050
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
EN ISO 20471 CL.1
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6329 81 FLAME RETARDANT LADIES CRAFTSMAN STRETCH TROUSERS
6325 81 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant ladies trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Ladies 6-20 94 yellow/navy 811, 852, 804
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets. The trousers has stretch for excellent fit and increased comfort ensuring full mobility at work. 30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852, 804
42
FLAME RETARDANT
STRETCH FR VISIBLE
The products on this section are certified according to:
EN ISO 11612 A1 B1 C1 F1
*EN ISO 11612 A1 B1 C1 F1
IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
*IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1 EN 13034 type PB[6] TRANEMO SKINSAFE
6032 95 FLAME RETARDANT SOFTSHELL JACKET
6062 95 FLAME RETARDANT SOFTSHELL WAISTCOAT
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal, wind and water resistant Inherent Flame Retardant softshell jacket with increased visibility and very high comfort.
Non-Metal, wind and water resistant Inherent Flame Retardant softshell waistcoat with increased visibility.
XS-4XL 94 yellow/navy 950
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6024 81 FLAME RETARDANT STRETCH TROUSERS
6054 81 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant trousers with increased visibility and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
XS-4XL 94 yellow/navy 950
Non-Metal and Inherent Flame Retardant trousers with increased visibility, nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work.
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852, 804
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6026 81 FLAME RETARDANT LADIES STRETCH TROUSERS Non-Metal and Inherent Flame Retardant ladies trousers with increased visibility and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies 6-20 94 yellow/navy 811, 852
* For complete information regarding product certifications, visit tranemo.co.uk
6056 81 FLAME RETARDANT LADIES CRAFTSMAN STRETCH TROUSERS Non-Metal and Inherent Flame Retardant ladies trousers with increased visibility, nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies 6-20 94 yellow/navy 811, 852, 804
6099 81 FLAME RETARDANT MATERNITY STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant maternity trousers with increased visibility, knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back. Size: Colour: Quality:
Ladies 6-20 94 yellow/navy 811, 852, 050
STRETCH FR Extra durable fly construction meaning reduced strain on the seams.
Cargo pocket with flap, mobile phone pocket, pen pockets and concealed keyring holder.
FLAME RETARDANT
43
In physically active work and movement, the stretch zones make the trousers fit perfectly.
Stretch zone in the crotch for maximum mobility.
Ruler pocket with reinforced bottom, knife loop and concealed knife button.
Shaped knees with inside kneepad pockets with two different placement levels.
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6022 81 FLAME RETARDANT STRETCH TROUSERS
6052 81 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work.
30”- 50”R, 32”- 40”T, 28”- 48”S 03 navy 811, 852
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 03 navy 811, 852, 804
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6094 81 FLAME RETARDANT MATERNITY STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back. Size: Colour: Quality:
Ladies 6-20 03 navy 811, 852, 050
6025 81 FLAME RETARDANT LADIES STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies 6-20 03 navy 811, 852
6055 81 FLAME RETARDANT LADIES CRAFTSMAN STRETCH TROUSERS Non-Metal and Inherent Flame Retardant ladies trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies 6-20 03 navy 811, 852, 804
FLAME RETARDANT
O
R
T
ST
RIC
T LEGISL
AT
IO
OFFICE FR
N
CO
O
C
’S
V
SE
EM
EM
EN
CH
T
AS
WE
PF
SU
TO
PP
44
RP
O R AT E PF
AS
M
OFFICE FR Office FR is a long-awaited range for workers who need to move between office environments and areas where there is an FR / Arc risk. With Tranemo’s OFFICE FR range, you can be well dressed in the conference room while being able to move in risk environments with adequate protection! The range is perfect for those who, for example, work with control panels or as an electrician and at the same time want to look good in the office. You don’t have to change before going home, the clothes are just as stylish and comfortable in your free time as they are at work. The trousers are available in both men’s and ladies sizes. The entire range is made of stretch fabrics, which makes the clothes flexible, comfortable, and light. In addition, the clothes are stylish and have a modern fit. Of course, the clothes also offer excellent Inherent Flame Retardant properties – the chinos are even E3 certified, which is the highest certification for molten iron. Now you no longer need to choose, you can be both stylish, comfortable and safe in risky environments!
OFFICE FR
FLAME RETARDANT
The products on this section are certified according to:
EN ISO 11612 A1 B1 C1 F1 EN 61482-2 APC 1 ELIM: 5,5 cal/cm² ATPV: 6,3 cal/cm² EN 1149-5
6354 91 FLAME RETARDANT STRETCH SHIRT
Inherent Flame Retardant office shirt in a comfortable stretch fabric. The shirt is Non-Metal and has a lightly shaped fit with navy details on the inside of the collar, front placket and cuffs. PFAS-free. Size: Colour: Quality:
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,3 cal/cm² EBT: 14,0 cal/cm²
EN 61482-2 APC 1 ELIM: 8,3 cal/cm² EBT: 14,0 cal/cm²
EN 1149-5
EN 1149-5
XS-4XL 15 light blue 913
6352 85 FLAME RETARDANT STRETCH JEANS
6359 85 FLAME RETARDANT LADIES STRETCH JEANS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant stretch jeans with a slim fit and a classic 5 pocket design. PFAS-free.
Non-Metal and Inherent Flame Retardant ladies stretch jeans with a slim fit and a classic 5 pocket design. PFAS-free.
30”- 50”R, 32”- 40”T, 30”- 48”S 34 Blue denim 850
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² ATPV: 18,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
Ladies 8-20 34 Blue denim 850
TRANEMO SKINSAFE
6351 88 FLAME RETARDANT STRETCH CHINOS
6356 88 FLAME RETARDANT LADIES STRETCH CHINOS
Size: Colour: Quality:
Size: Colour: Quality:
PFAS-free, Non-Metal and Inherent Flame Retardant stretch chinos with increased movement and high levels of comfort for varying work environments. 30”- 50”R, 32”- 40”T, 30”- 48”S 03 navy 884
PFAS-free, Non-Metal and Inherent Flame Retardant ladies stretch chinos with excellent fit and increased comfort ensuring full mobility at work. Ladies 8-20 03 navy 884
45
FLAME RETARDANT
TRANEMO SKINSAFE
TRANEMO SKINSAFE TERA TX-SYSTEM Tranemo Skinsafe™ is the name of our multi-layer system designed to protect against flame, heat and Electric Arc injuries. Starting at skin level, Tranemo has taken a humancentric approach to design, putting the individual at the focus of protection. The use of multiple thinner layers instead of one thick layer, offers the wearer Flame Retardant protective clothing that is lightweight and gives a better freedom of movement. This allows the wearer to work more effectively and for longer periods. Tera TX is a very popular layering choice in the power industry and other outdoor work. When Tera TX is combined with one or more layers of other Flame Retardant garments, a system that reaches a higher level of protection is created. The system is also suitable for working outside at different levels of intensity and temperature.
SHIELD 899 CANTEX TERRY ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm², PPE 2
895 CANTEX JERSEY AT ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm², PPE 1
2
5834 81 94
44
APC
5085 89 94
37
ATPV (cal/cm²)
INSULATION
ELIM (cal/cm²)
5082 89 94
TERA TX SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
42
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
SHIELD
5834 81 94
6330 90 07
37
ATPV (cal/cm²)
INSULATION
ELIM (cal/cm²)
6315 90 07
TERA TX SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
903 MERINO TX ELIM: 9,6 cal/cm² EBT: 10,0 cal/cm², PPE 2
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
40
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
SHIELD
5834 81 94
5085 89 94
35
ATPV (cal/cm²)
INSULATION
ELIM (cal/cm²)
6315 90 07
TERA TX SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
899 CANTEX TERRY ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm², PPE 2
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
41
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
SHIELD
5834 81 94
6309 90 82
32
ATPV (cal/cm²)
INSULATION
ELIM (cal/cm²)
6315 90 07
TERA TX SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
902 MERINO BX ELIM: 6,3 cal/cm² ATPV: 7,6 cal/cm², PPE 1
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
TRANEMO SKINSAFE™
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
SHIELD 902 MERINO BX ELIM: 6,3 cal/cm² ATPV: 7,6 cal/cm², PPE 1
6321 81 94
41
6302 90 82
32
ATPV (cal/cm²)
6312 90 07
ELIM (cal/cm²)
INSULATION
TERA TX SYSTEM SKIN PROTECTION
46
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
TRANEMO SKINSAFE
FLAME RETARDANT
18
APC
SHIELD
15
ATPV (cal/cm²)
5836 81 94
ELIM (cal/cm²)
5779 91 94
TERA TX SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
911 TERA TX LIGHT ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm², PPE 2
2
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
22
APC
SHIELD
14
ATPV (cal/cm²)
5836 81 94
ELIM (cal/cm²)
6314 90 82
TERA TX SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
2
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
TRANEMO SKINSAFE™
2
SHIELD
22
APC
6327 81 94
14
ATPV (cal/cm²)
6311 90 82
ELIM (cal/cm²)
SKIN PROTECTION
TERA TX SYSTEM
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
25
SHIELD
17
ATPV (cal/cm²)
5834 81 94
ELIM (cal/cm²)
6309 90 82
TERA TX SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
902 MERINO BX ELIM: 6,3 cal/cm² ATPV: 7,6 cal/cm², PPE 1
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
19
APC
SHIELD
17
ATPV (cal/cm²)
5834 81 94
ELIM (cal/cm²)
5940 92 03
TERA TX SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
920 CANTEX JX ARC RATING: 7,0 cal/cm² PPE 1
2
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
TRANEMO SKINSAFE™
2
SHIELD
19
APC
920 CANTEX JX ARC RATING: 7,0 cal/cm² PPE 1
6321 81 94
17
ATPV (cal/cm²)
5930 92 03
ELIM (cal/cm²)
SKIN PROTECTION
TERA TX SYSTEM
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
47
48
FLAME RETARDANT
TERA TX
TERA TX HIGH VISIBILITY
TERA TX TERA TX is our largest Flame Retardant range developed in collaboration with the electricity and power industries and companies that require completely metal free garments. The non-metal and Anti-static protective clothing provides the user with the highest levels of functionality, superior comfort and garments with a really long life. Thanks to the fact that the Flame Retardant garments are non-metal, the risk of sparking is reduced, which is especially important in sensitive ATEX environments. The metal free clothing also eliminates the risk that a metal accessory could fall off the garment and remain in the area after the work has been completed. TERA TX is also recommended when working with certain chemicals and most of the protective clothing is designed according to the requirements of EN 13034. All protective clothing in TERA TX is light and compliant with high functionality, which makes it comfortable to always wear the right protection at work. All garments meet at least the requirements for PPE category 2 (over 8 cal/cm²) according to EN 61482-1-1 (Open Arc). If the work requires even higher protection against Electric Arc, there are many different layer-on-layer combinations to choose from in Tranemo SkinsafeTM and with different layers it is easy to achieve the right protection for different levels of risk. TERA TX is a comprehensive collection with clothes for all climates including a large range of ladies styles.
Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or at tranemo.co.uk. 811: Tera TX, 260 g/m², LOI: 29,8%
c95mt
TERA TX HIGH VISIBILITY
FLAME RETARDANT
The products on this section are certified according to:
NEW EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm² EN 1149-5 EN 13034 type PB[6]
5801 81 FLAME RETARDANT WINTER JACKET
EN ISO 20471 CL.3 CL.2* (XS-S)
Non-Metal and Inherent Flame Retardant Hi-Vis Winter Jacket with fiberfur lining in body and quilted lining in sleeves. The jacket is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs.
**EN 342 (5801/5808+5822)
Size: Colour: Quality:
XXS-4XL 94 yellow/navy 811, 060, 054, 911
NEW EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm² EN 1149-5 ***EN 13034 type PB[6]
5808 81 FLAME RETARDANT WINTER JACKET, HOOD
EN ISO 20471 CL.3 CL.2* (XS-S)
Non-Metal and Inherent Flame Retardant Hi-Vis Winter Jacket with removable hood, fiberfur lining in body and quilted lining in sleeves. The jacket is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs.
**EN 342 (5801/5808+5822)
Size: Colour: Quality:
XXS-4XL 94 yellow/navy 811, 060, 054, 911
NEW *EN ISO 11612 A1+A2 B1 C1 F1 *EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm² EN 1149-5
5868 81 FLAME RETARDANT BODYWARMER
**EN ISO 20471 CL.2 CL.1 (XS-L)
Non-Metal and Inherent Flame Retardant Hi-Vis Winter Bodywarmer with fiberfur lining. The waistcoat is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs. Size: Colour: Quality:
9065 81 FLAME RETARDANT HOOD
XS-4XL 94 yellow/navy 811, 060, 054, 911
Adjustable hood with wind and waterproof jersey lining. Can be attached to articles 5801/5802/5868, 5800/5803/5869 and 5832 81. Size: Colour: Quality:
One size 55 yellow 811, 898
* For complete information regarding product certifications, visit tranemo.co.uk
49
FLAME RETARDANT
50
TERA TX HIGH VISIBILITY
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
*EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
*IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN ISO 11611 CL.1 A1+A2
EN ISO 20471 CL.2 CL.1 (XS-M)
EN ISO 20471 CL.3
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 20471 CL.2*
TRANEMO SKINSAFE
EN ISO 15797 50 WASHES
5831 81 FLAME RETARDANT JACKET
Non-Metal and Inherent Flame Retardant Hi-Vis jacket with vertical chest pockets. The jacket is made of a light and durable fabric, perfect for work where flame protection, protection aginst Electric Arc and High Visibility are required. Size: Colour: Quality:
TRANEMO SKINSAFE
XS-4XL 94 yellow/navy 811
5860 81 FLAME RETARDANT CRAFTSMAN VEST
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis industry jacket in a light fabric with a comfortable feel and good tear resistance. XS-4XL 94 yellow/navy 811
Non-Metal and Inherent Flame Retardant Hi-Vis multi-function tool vest in a light fabric with a comfortable feel and good tear resistance. XS-4XL 55 yellow 811
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2 CL.1 (30”S)
EN ISO 20471 CL.2
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6321 81 FLAME RETARDANT STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852, 804
* For complete information regarding product certifications, visit tranemo.co.uk
The products on this section are certified according to:
5834 81 FLAME RETARDANT JACKET
6324 81 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant HiVis trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852, 804
TERA TX HIGH VISIBILITY
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
*EN 342 (5822+5801 or 5808)
TRANEMO SKINSAFE
5826 81 FLAME RETARDANT TROUSERS
TRANEMO SKINSAFE
Non-Metal and Inherent Flame Retardant Hi-Vis trousers in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
5820 81 FLAME RETARDANT TROUSERS
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with a wide fit and a windproof jersey lining.
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
*EN 342 (5852+5801 or 5808)
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5856 81 FLAME RETARDANT CRAFTSMAN TROUSERS
5850 81 FLAME RETARDANT TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis trousers in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804, 898
5852 81 FLAME RETARDANT CRAFTSMAN TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a wide fit in a light fabric with a comfortable feel and good tear resistance.
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804
51
5822 81 FLAME RETARDANT TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with a wide fit in a light fabric with a comfortable feel and good tear resistance.
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811
FLAME RETARDANT
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets with a wide fit and a windproof jersey lining.
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804, 898
EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN 1149-5 EN 13034 type PB[6] EN ISO 20471 CL.3 EN ISO 15797 50 WASHES
TRANEMO SKINSAFE TRANEMO SKINSAFE
5840 81 FLAME RETARDANT BIB ’N’ BRACE
Non-Metal and Inherent Flame Retardant Hi-Vis bib ’n’ brace with front zip in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 811
5849 81 FLAME RETARDANT BIB ’N’ BRACE
5811 81 FLAME RETARDANT BOILERSUIT
Size: Colour: Quality:
Size:
XS-4XL, M-3XL Tall
Colour: Quality:
94 yellow/navy 811
Non-Metal and Inherent Flame Retardant Hi-Vis bib ’n’ brace with nail pockets and front zip in a light fabric with a comfortable feel and good tear resistance.
* For complete information regarding product certifications, visit tranemo.co.uk
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 811, 804
Non-Metal and Inherent Flame Retardant Hi-Vis boilersuit made of the light and durable Tera TX fabric. The boilersuit is suitable for work where flame protection, protection against Electric Arc and High Visibility are required.
52
FLAME RETARDANT
TERA TX HIGH VISIBILITY LADIES
NEW
NEW
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
***EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (S-L)
EN ISO 20471 CL.3 CL.2* (S-L)
**EN 342 (5802/5806+5862)
**EN 342 (5802/5806+5862)
5802 81 FLAME RETARDANT LADIES WINTER JACKET
5806 81 FLAME RETARDANT LADIES WINTER JACKET, HOOD
Non-Metal and Inherent Flame Retardant Ladies Hi-Vis Winter Jacket with fiberfur lining in body and quilted lining in sleeves. The jacket is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs. Size: Colour: Quality:
The products on this section are certified according to:
9065 81 FLAME RETARDANT HOOD
Non-Metal and Inherent Flame Retardant Ladies Hi-Vis Winter Jacket with removable hood, fiberfur lining in body and quilted lining in sleeves. The jacket is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs.
Ladies S-XXL 94 yellow/navy 811, 060, 054, 911
Size: Colour: Quality:
Adjustable hood with wind and waterproof jersey lining. Can be attached to articles 5801/5802/5868, 5800/5803/5869 and 5832 81. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 811, 060, 054, 911
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN ISO 11611 CL.1 A1+A2
EN ISO 20471 CL.3 CL.2* (S-M)
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 20471 CL.2*
TRANEMO SKINSAFE
5836 81 FLAME RETARDANT LADIES JACKET
Non-Metal and Inherent Flame Retardant Hi-Vis ladies jacket in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
Ladies S-XXL 94 yellow/navy 811
One size 55 yellow 811, 898
5838 81 FLAME RETARDANT LADIES JACKET
Non-Metal and Inherent Flame Retardant Hi-Vis ladies jacket in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 811
EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN 1149-5 EN 13034 type PB[6] EN ISO 20471 CL.3 CL.2 (S-L) EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5818 81 FLAME RETARDANT LADIES BOILERSUIT
Non-Metal and Inherent Flame Retardant Hi-Vis ladies boilersuit made of the light and durable Tera TX fabric. The boilersuit is suitable for work where flame protection, protection against Electric Arc and High Visibility are required. Size: Colour: Quality:
* For complete information regarding product certifications, visit tranemo.co.uk
Ladies S-XXL 94 yellow/navy 811
TERA TX HIGH VISIBILITY LADIES
FLAME RETARDANT
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 20471 CL.2 CL.1 (6-8)
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6326 81 FLAME RETARDANT LADIES STRETCH TROUSERS
Size: Colour: Quality:
6327 81 FLAME RETARDANT LADIES CRAFTSMAN STRETCH TROUSERS
6396 81 FLAME RETARDANT MATERNITY STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.
Non-Metal and Inherent Flame Retardant ladies trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work.
Non-Metal and Inherent Flame Retardant maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back.
Ladies 6-20 94 yellow/navy 811, 852, 804
Size: Colour: Quality:
Size: Colour: Quality:
Ladies 6-20 94 yellow/navy 811, 852, 804, 050
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
*EN 342 (5862+5802 or 5806)
TRANEMO SKINSAFE
5827 81 FLAME RETARDANT LADIES TROUSERS
TRANEMO SKINSAFE
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with a wide fit in a light fabric with a comfortable feel and good tear resistance.
Size: Colour: Quality:
Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with a wide fit and a windproof jersey lining.
Ladies 8-20 94 yellow/navy 811, 804
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
*EN 342 (5867+5802 or 5806)
TRANEMO SKINSAFE
Ladies 6-20 94 yellow/navy 811, 852, 804
5862 81 FLAME RETARDANT LADIES TROUSERS, WINDBREAKER
5829 81 FLAME RETARDANT LADIES TROUSERS
Non-metal and Inherent Flame Retardant Hi-Vis ladies trousers in a light fabric with a comfortable feel and good tear resistance.
53
Ladies 8-20 94 yellow/navy 811, 804, 898
TRANEMO SKINSAFE
5857 81 FLAME RETARDANT LADIES CRAFTSMAN TROUSERS
5859 81 FLAME RETARDANT LADIES CRAFTSMAN TROUSERS
5867 81 FLAME RETARDANT LADIES CRAFTSMAN TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers in a light fabric with a comfortable feel and good tear resistance.
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with a wide fit in a light fabric with a comfortable feel and good tear resistance.
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets with a wide fit and a windproof jersey lining.
Size: Colour: Quality:
Size: Colour: Quality:
Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811, 804
* For complete information regarding product certifications, visit tranemo.co.uk
Ladies 8-20 94 yellow/navy 811, 804
Ladies 8-20 94 yellow/navy 811, 804, 898
54
FLAME RETARDANT The products on this section are certified according to:
TERA TX HIGH VISIBILITY NEW EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
*EN ISO 11611 CL.1 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.1 EN ISO 15797 50 WASHES
EN ISO 20471 CL.1
TRANEMO SKINSAFE
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5841 81 FLAME RETARDANT BIB ’N’ BRACE
6023 81 FLAME RETARDANT TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis bib ’n’ brace in a light fabric with a comfortable feel and good tear resistance.
Non-Metal and Inherent Flame Retardant Hi-Vis trousers designed for work where there is a risk of chemical splashes. The trousers are made of a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 20471 CL.1
EN ISO 20471 CL.1
TRANEMO SKINSAFE
EN ISO 15797 50 WASHES
*EN 342 (5823+5801 or 5808)
6322 81 FLAME RETARDANT STRETCH TROUSERS
TRANEMO SKINSAFE
Non-Metal and Inherent Flame Retardant trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
5821 81 FLAME RETARDANT TROUSERS
5823 81 FLAME RETARDANT TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis trousers in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852, 804
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with windproof jersey lining. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
EN ISO 20471 CL.1
EN ISO 20471 CL.1
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
*EN 342 (5853+5801 or 5808)
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6325 81 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets. The trousers has stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852, 804
* For complete information regarding product certifications, visit tranemo.co.uk
5851 81 FLAME RETARDANT CRAFTSMAN TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 811
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 898
5853 81 FLAME RETARDANT CRAFTSMAN TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a windproof jersey lining. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804, 898
TERA TX HIGH VISIBILITY LADIES
FLAME RETARDANT
55
NEW EN ISO 11612 A1+A2 B1 C1 E1 F1 EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN 1149-5 *EN ISO 11611 CL.1 A1+A2 EN 13034 type PB[6] EN ISO 20471 CL.1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
EN ISO 20471 CL.1
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
6027 81 FLAME RETARDANT LADIES TROUSERS
6328 81 FLAME RETARDANT LADIES STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant Ladies Hi-Vis trousers designed for work where there is a risk of chemical splashes. The trousers are made of a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
6398 81 FLAME RETARDANT MATERNITY STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies 8-20, 8T-20T 94 yellow/navy 811
Non-Metal and Inherent Flame Retardant maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back.
Ladies 6-20 94 yellow/navy 811, 852, 804
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.1
EN ISO 20471 CL.1
EN ISO 20471 CL.1
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
*EN 342 (5863+5802 or 5806)
TRANEMO SKINSAFE
Ladies 6-20 94 yellow/navy 811, 852, 804, 050
TRANEMO SKINSAFE
5828 81 FLAME RETARDANT LADIES TROUSERS
5899 81 FLAME RETARDANT MATERNITY TROUSERS
Non-Metal and Inherent Flame Retardant maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back. Size: Colour: Quality:
5863 81 FLAME RETARDANT LADIES TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811, 050
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with windproof jersey lining.
Ladies 8-20 94 yellow/navy 811
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
EN ISO 20471 CL.1
EN ISO 20471 CL.1
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
*EN 342 (5866+5802 or 5806)
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6329 81 FLAME RETARDANT LADIES CRAFTSMAN STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies 6-20 94 yellow/navy 811, 852, 804
* For complete information regarding product certifications, visit tranemo.co.uk
5858 81 FLAME RETARDANT LADIES TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811, 804
Ladies 8-20 94 yellow/navy 811, 898
5866 81 FLAME RETARDANT LADIES TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets and a windproof jersey lining. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811, 804, 898
56
FLAME RETARDANT
TERA TX VISIBLE
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
*EN ISO 11611 CL.1 A1+A2
EN ISO 15797 50 WASHES
EN 13034 type PB[6]
TRANEMO SKINSAFE
EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN 1149-5 EN ISO 15797 50 WASHES TRANEMO SKINSAFE
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
6030 81 FLAME RETARDANT JACKET
6024 81 FLAME RETARDANT STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant jacket with increased visibility in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
6054 81 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant trousers with increased visibility and stretch for excellent fit and increased comfort ensuring full mobility at work.
XS-4XL 94 yellow/navy 811
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant trousers with increased visibility, nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work.
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 15797 50 WASHES
*EN ISO 11611 CL.1 A1+A2
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
EN 13034 type PB[6]
TRANEMO SKINSAFE
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 811, 852, 804
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
6031 81 FLAME RETARDANT JACKET
Size: Colour: Quality:
6051 81 FLAME RETARDANT CRAFTSMAN TROUSERS
6021 81 FLAME RETARDANT TROUSERS
Non-Metal and Inherent Flame Retardant jacket with knitted cuffs and increased visibility in a light fabric with a comfortable feel and good tear resistance.
Non-Metal and Inherent Flame Retardant trousers with nail pockets and increased visibility.
Non-Metal and Inherent Flame Retardant trousers with increased visibility in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
XS-4XL 94 yellow/navy 811
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
*EN ISO 11611 CL.1 A1+A2
*EN ISO 11611 CL.1 A1+A2
*EN ISO 11611 CL.1 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
TRANEMO SKINSAFE
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804
6041 81 FLAME RETARDANT BIB ’N’ BRACE
6010 81 FLAME RETARDANT BOILERSUIT
6011 81 FLAME RETARDANT BOILERSUIT
Size: Colour: Quality:
Size:
Size:
Non-Metal and Inherent Flame Retardant bib ’n’ brace with increased visibility in a light fabric with a comfortable feel and good tear resistance. 30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 811
* For complete information regarding product certifications, visit tranemo.co.uk
Non-Metal and Inherent Flame Retardant boilersuit with increased visibility in a light fabric with a comfortable feel and good tear resistance.
Colour: Quality:
XS-5XL (inside leg 32”), M-4XL Tall (inside leg 34”) 94 yellow/navy 811
Non-Metal and Inherent Flame Retardant boilersuit with extra increased visibility in a light fabric with a comfortable feel and good tear resistance.
Colour: Quality:
XS-5XL (inside leg 32”), M-4XL Tall (inside leg 34”) 94 yellow/navy 811
FLAME RETARDANT
TERA TX VISIBLE LADIES
57
The products on this section are certified according to:
NEW EN ISO 11612 A1+A2 B1 C1 E1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN 1149-5 *EN ISO 11611 CL.1 A1+A2
6037 81 FLAME RETARDANT LADIES JACKET
EN 13034 type PB[6]
Non-Metal and Inherent Flame Retardant ladies jacket with increased visibility in a light fabric with a comfortable feel and good tear resistance.
EN ISO 15797 50 WASHES
Size: Colour: Quality:
TRANEMO SKINSAFE
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6026 81 FLAME RETARDANT LADIES STRETCH TROUSERS Non-Metal and Inherent Flame Retardant ladies trousers with increased visibility and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies 6-20 94 yellow/navy 811, 852
6056 81 FLAME RETARDANT LADIES CRAFTSMAN STRETCH TROUSERS
6099 81 FLAME RETARDANT MATERNITY STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with increased visibility, nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 811
Non-Metal and Inherent Flame Retardant maternity trousers with increased visibility, knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back.
Ladies 6-20 94 yellow/navy 811, 852, 804
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
*EN ISO 11611 CL.1 A1+A2
EN ISO 15797 50 WASHES
EN 13034 type PB[6]
TRANEMO SKINSAFE
Ladies 6-20 94 yellow/navy 811, 852, 050
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
6028 81 FLAME RETARDANT LADIES TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with increased visibility in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811
* For complete information regarding product certifications, visit tranemo.co.uk
6058 81 FLAME RETARDANT LADIES CRAFTSMAN TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with nail pockets and increased visibility. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811, 804
58
FLAME RETARDANT
TERA TX
EN ISO 11612 A1+A2 B1 C1 E1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
EN 1149-5 *EN ISO 11611 CL.1 A1+A2 EN 13034 type PB[6] EN ISO 15797 50 WASHES TRANEMO SKINSAFE
6022 81 FLAME RETARDANT STRETCH TROUSERS
6035 81 FLAME RETARDANT JACKET
Non-Metal and Inherent Flame Retardant trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.
Non-Metal and Inherent Flame Retardant jacket in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
6052 81 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS
Size: Colour: Quality:
XS-4XL 03 navy 811
Non-Metal and Inherent Flame Retardant trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work.
30”- 50”R, 32”- 40”T, 28”- 48”S 03 navy 811, 852
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 03 navy 811, 852, 804
EN ISO 11612 A1+A2 B1 C1 E1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN 1149-5 *EN ISO 11611 CL.1 A1+A2 EN 13034 type PB[6] EN ISO 15797 50 WASHES TRANEMO SKINSAFE
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
*EN ISO 11611 CL.1 A1+A2
EN ISO 15797 50 WASHES
EN 13034 type PB[6]
TRANEMO SKINSAFE
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
6040 81 FLAME RETARDANT BIB ’N’ BRACE
6020 81 FLAME RETARDANT TROUSERS
6050 81 FLAME RETARDANT CRAFTSMAN TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant bib ’n’ brace in a light fabric with a comfortable feel and good tear resistance. 30”- 50”R, 32”- 40”T, 34”- 48”S 03 navy 811
Non-Metal and Inherent Flame Retardant trousers in a light fabric with a comfortable feel and good tear resistance.
* For complete information regarding product certifications, visit tranemo.co.uk
The products on this section are certified according to:
30”- 50”R, 32”- 40”T, 30”- 48”S 03 navy 811
Non-Metal and Inherent Flame Retardant trousers with nail pockets in a light fabric with a comfortable feel and good tear resistance. 30”- 50”R, 32”- 40”T, 30”- 48”S 03 navy 811, 804
LADIES TERAZENITH TX LADIES
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6094 81 FLAME RETARDANT MATERNITY STRETCH TROUSERS
6025 81 FLAME RETARDANT LADIES STRETCH TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Ladies 8-22 03 navy 811, 852, 050
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5
EN 1149-5
*EN ISO 11611 CL.1 A1+A2
EN ISO 15797 50 WASHES
EN 13034 type PB[6]
TRANEMO SKINSAFE
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
6029 81 FLAME RETARDANT LADIES TROUSERS
Ladies 8-22 03 navy 811, 852, 804
6059 81 FLAME RETARDANT LADIES CRAFTSMAN TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers in a light fabric with a comfortable feel and good tear resistance. Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant ladies trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work.
Ladies 8-22 03 navy 811, 852
EN ISO 11612 A1+A2 B1 C1 E1 F1
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets in a light fabric with a comfortable feel and good tear resistance.
Ladies 10-22 03 navy 811
Size: Colour: Quality:
Ladies 10-22 03 navy 811, 804
* For complete information regarding product certifications, visit tranemo.co.uk
22
APC
SHIELD
6035 81 03
14
ATPV (cal/cm²)
6315 90 07
ELIM (cal/cm²)
SKIN PROTECTION
TRANEMO SKINSAFE™ TERA TX SYSTEM
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
2
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
TRANEMO SKINSAFE™
2
SHIELD 901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
6022 81 03
22
APC
6312 90 07
14
ATPV (cal/cm²)
SKIN PROTECTION
TERA TX SYSTEM ELIM (cal/cm²)
59
6055 81 FLAME RETARDANT LADIES CRAFTSMAN STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.
Non-Metal and Inherent Flame Retardant maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back.
FLAME RETARDANT
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
FLAME RETARDANT
60
ZENITH TERA TXLADIES ARC 2
TERA TX ARC 2 TERA TX Arc 2 is a lightweight 2-layer solution offering a higher level of protection. The soft and durable Tera TX with ripstop functionality, provides high comfort with a modern design and combined with the soft inner lining, the level of Electric Arc protection is approved for EN 61482-2 APC 2. Tera TX has been developed in co-operation with some of the market leading Power and Utility industries across Europe and the garments feature the quality and functionality these users require. This product range is optimal for any company working within distribution or production of electrical power or any electrical installation with a demand for protection according to EN 61482-2 APC 2 (7 kA). Standard quality and washing instruction for the range: The garments in the range may consist of more and/ or other qualities. See quality specification for each product or at tranemo.co.uk.
The products on this section are certified according to:
811: Tera TX, 260 g/m², LOI: 29,8% 911: Lining, Tera TX Light, 160 g/m², LOI: 26,7%
c95mt TERA TX ARC 2 LADIES NEW
NEW
NEW
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN ISO 11611 CL.1 A1+A2
*EN ISO 11611 CL.1 A1+A2
EN ISO 20471 CL.3 CL.2* (S-M)
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
5892 81 FLAME RETARDANT LINED LADIES JACKET
Non-Metal and Inherent Flame Retardant Hi-Vis ladies jacket with a thin lining to achieve higher protection against Electric Arc, EN 61482-2 APC 2. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 811, 911
EN ISO 20471 CL.2* EN ISO 15797 50 WASHES
5894 81 FLAME RETARDANT LINED LADIES JACKET
Non-Metal and Inherent Flame Retardant Hi-Vis ladies jacket with a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2. Size: Colour: Quality:
* For complete information regarding product certifications, visit tranemo.co.uk
Ladies S-XXL 94 yellow/navy 811, 911
EN ISO 15797 50 WASHES
6087 81 FLAME RETARDANT LINED LADIES JACKET
Non-Metal and Inherent Flame Retardant ladies jacket with increased visibility and a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 811, 911
TERA TX ARC 2 LADIES
NEW
NEW
FLAME RETARDANT
NEW
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN 13034 type PB[6]
*EN ISO 11611 CL.1 A1+A2
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 20471 CL.1
5870 81 FLAME RETARDANT LINED LADIES TROUSERS
5874 81 FLAME RETARDANT LINED LADIES TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with a wide fit and a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Size: Colour: Quality:
Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811, 804, 911
EN ISO 15797 50 WASHES
Non-Metal and Inherent Flame Retardant Ladies Hi-Vis trousers designed for work where there is a risk of chemical splashes. The trousers have a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Ladies 8-20 94 yellow/navy 811, 911
Size: Colour: Quality:
NEW
NEW
6079 81 FLAME RETARDANT LADIES LINED TROUSERS
NEW
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 20471 CL.1
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets and a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Lined, Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets. The trousers have a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Lined, Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets and a wide fit. Thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2. Size: Colour: Quality:
5896 81 FLAME RETARDANT LINED LADIES CRAFTSMAN TROUSERS
5879 81 FLAME RETARDANT LINED LADIES CRAFTSMAN TROUSERS
5876 81 FLAME RETARDANT LINED LADIES CRAFTSMAN TROUSERS
Ladies 8-20 94 yellow/navy 811, 804, 911
Size: Colour: Quality:
Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811, 911, 804
NEW
NEW
Ladies 8-20, 8T-20T 94 yellow/navy 811, 911
Ladies 8-20 94 yellow/navy 811, 911
NEW
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
*EN ISO 11611 CL.1 A1+A2
*EN ISO 11611 CL.1 A1+A2
EN ISO 20471 CL.1
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
5893 81 FLAME RETARDANT LADIES LINED TROUSERS
6089 81 FLAME RETARDANT LINED LADIES TROUSERS
6088 81 FLAME RETARDANT LINED LADIES TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Non-Metal and Inherent Flame Retardant ladies trousers with increased visibility, lined to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Non-Metal and Inherent Flame Retardant ladies trousers with a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Size: Colour: Quality:
Size: Colour: Quality:
Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811, 911
* For complete information regarding product certifications, visit tranemo.co.uk
Ladies 8-20 94 yellow/navy 811, 911
Ladies 8-20 03 navy 811, 911
61
62
FLAME RETARDANT
TERA TX ARC 2 The products on this section are certified according to:
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.3
EN ISO 20471 CL.2*
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
5884 81 FLAME RETARDANT LINED JACKET
5882 81 FLAME RETARDANT LINED JACKET
Non-Metal and Inherent Flame Retardant Hi-Vis industry jacket with a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Non-Metal and Inherent Flame Retardant Hi-Vis jacket with vertical chest pockets. The jacket is made of a light and durable fabric, perfect for work where flame protection, protection against Electric Arc and High Visibility are required. Size: Colour: Quality:
Size: Colour: Quality:
XS-4XL 94 yellow/navy 811, 911
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 15797 50 WASHES
XS-4XL 94 yellow/navy 811, 911
EN ISO 15797 50 WASHES
5885 81 FLAME RETARDANT LINED BIB ’N’ BRACE
5895 81 FLAME RETARDANT LINED BIB ’N’ BRACE
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis bib ’n’ brace with front zip and a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Non-Metal and Inherent Flame Retardant Hi-Vis bib ’n’ brace with nail pockets and front zip. Thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 811, 911
To achieve a higher protection against Electric Arc, all TERA TX ARC 2 garments are lined with the same lightweight and soft quality fabric as many of our Inherent FR shirts are made from.
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 811, 911, 804
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
*EN ISO 11611 CL.1 A1+A2
*EN ISO 11611 CL.1 A1+A2
EN ISO 20471 CL.1
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
5886 81 FLAME RETARDANT LINED BIB ’N’ BRACE
6086 81 FLAME RETARDANT LINED BIB ’N’ BRACE
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis bib ’n’ brace with a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2. 30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 811, 911
* For complete information regarding product certifications, visit tranemo.co.uk
Non-Metal and Inherent Flame Retardant Bib ’n’ Brace with increased visibility, lined to achieve higher protection against Electric Arc, IEC 614822 APC 2. 30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 811, 911
6085 81 FLAME RETARDANT LINED BIB ’N’ BRACE
Non-Metal and Inherent Flame Retardant Bib ’n’ Brace, lined to achieve higher protection against Electric Arc, IEC 61482-2 APC 2. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 03 navy 811, 911
TERA TX ARC 2
EN ISO 11612 A1+A2 B1 C1 E1 F1
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
6072 81 FLAME RETARDANT LINED TROUSERS
EN 1149-5 *EN ISO 11611 CL.1 A1+A2
Non-Metal and Inherent Flame Retardant Hi-Vis trousers designed for work where there is a risk of chemical splashes. The trousers have a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
*EN ISO 11611 CL.1 A1+A2
EN 13034 type PB[6] EN ISO 15797 50 WASHES
63
NEW
EN ISO 11612 A1+A2 B1 C1 E1 F1
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
FLAME RETARDANT
EN 13034 type PB[6]
6083 81 FLAME RETARDANT LINED JACKET
Size: Colour: Quality:
Size: Colour: Quality:
EN ISO 20471 CL.1
Non-Metal and Inherent Flame Retardant jacket with increased visibility, lined to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
EN ISO 15797 50 WASHES
XS-4XL 94 yellow/navy 811, 911
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
*EN ISO 11611 CL.1 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
6084 81 FLAME RETARDANT LINED JACKET
Non-Metal and Inherent Flame Retardant jacket, lined to achieve higher protection against Electric Arc, IEC 61482-2 APC 2. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 911
5880 81 FLAME RETARDANT LINED TROUSERS
5887 81 FLAME RETARDANT LINED TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with a wide fit and a thin lining to achieve higher protection against Electric Arc, IEC 614822 APC 2.
XS-4XL 03 navy 811, 911
Non-Metal and Inherent Flame Retardant Hi-Vis trousers in a light fabric and a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804, 911
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 20471 CL.1
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 911
EN ISO 15797 50 WASHES
5881 81 FLAME RETARDANT LINED TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 911
5890 81 FLAME RETARDANT LINED CRAFTSMAN TROUSERS
5897 81 FLAME RETARDANT LINED CRAFTSMAN TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a wide fit. Thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Non-Metal and Inherent Flame Retardant Hi-Vis trousers in a light fabric and a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2.
Size: Colour: Quality:
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 911, 804
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
*EN ISO 11611 CL.1 A1+A2
*EN ISO 11611 CL.1 A1+A2
EN ISO 15797 50 WASHES
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
5891 81 FLAME RETARDANT LINED CRAFTSMAN TROUSERS
6081 81 FLAME RETARDANT LINED TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2. 30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 911
* For complete information regarding product certifications, visit tranemo.co.uk
Non-Metal and Inherent Flame Retardant trousers with increased visibility, lined to achieve higher protection against Electric Arc, IEC 61482-2 APC 2. 30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 911
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804, 911
6080 81 FLAME RETARDANT LINED TROUSERS
Non-Metal and Inherent Flame Retardant trousers with a thin lining to achieve higher protection against Electric Arc, IEC 61482-2 APC 2. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 03 navy 811, 911
FLAME RETARDANT
O
R
T
ST
RIC
T LEGISL
AT
IO
CANTEX WS ARC 25+
N
CO
O
C
’S
V
SE
EM
EM
EN
CH
T
AS
WE
PF
SU
TO
PP
64
RP
O R AT E PF
AS
M
CANTEX ARC 25+ CANTEX ARC 25+ is a comfortable 2-layer system with protection against high energy levels certified according to EN 61482-2 APC 2. With these Inherent Flame Retardant protective clothing we can offer a comprehensive system for Electric Arc protection with an ELIM value of 27 cal/cm², corresponding to PPE 3 category against Electric Arc accidents (according NFPA 70E). Cantex Arc 25+ enables a flexible adaptation depending on the risk level and need of protection based on the current work situation. The double layer jackets and trousers with durable and PFAS-free outer fabric Cantex Weld Stretch, means the garments withstand the highest level of protection against splashes of molten metal EN ISO 11612 E3 and the requirements for heavy welding EN ISO 11611 class 2. High performance together with a soft and comfortable feel provides high protection throughout the entire working day. Complete the range with suitable accessories and you can achieve a comprehensive full body protection against Electric Arc. Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk. 885: Cantex Weld, 365 g/m², LOI: 29,0% 884: Cantex Stretch, 365 g/m², LOI: 29,5% 911: Lining, Tera TX Light, 160 g/m², LOI: 26,7%
c95mt
To achieve a high protection against Electric Arc, all CANTEX ARC 25+ garments are lined with the same lightweight and soft quality fabric as many of our Inherent FR shirts are made from.
CANTEX WS ARC 25+
NEW
NEW EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 20471 CL.2
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN 13034 type PB[6]
EN ISO 20471 CL.2
EN ISO 20471 CL.3 CL.2* (S-XL)
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
PFAS-free and Inherent Flame Retardant Hi-Vis ladies trousers with a thin lining to achieve high protection against Electric Arc. The trousers also have a high protection against welding and grinding splashes. Size: Colour: Quality:
Ladies 8-20, 8T-20T 94 yellow/navy 885, 884, 911
5183 88 FLAME RETARDANT LADIES LINED JACKET
5186 88 FLAME RETARDANT LADIES LINED CRAFTSMAN TROUSERS
PFAS-free and Inherent Flame Retardant Hi-Vis ladies jacket with a thin lining to achieve high protection against Electric Arc. The jacket also has a high protection against welding and grinding splashes.
PFAS-free and Inherent Flame Retardant Hi-Vis ladies craftsman trousers with a thin lining to achieve high protection against Electric Arc. The trousers also have a high protection against welding and grinding splashes. Size: Colour: Quality:
Size: Colour: Quality:
Ladies 8-20, 8T-20T 94 yellow/navy 885, 884, 911
NEW
Ladies S-XXL 94 yellow/navy 885, 884, 911
NEW
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 20471 CL.1
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 20471 CL.1 EN ISO 15797 50 WASHES
5180 88 FLAME RETRADANT LADIES LINED TROUSERS
PFAS-free and Inherent Flame Retardant Hi-Vis ladies trousers with a thin lining to achieve high protection against Electric Arc. The trousers also have a high protection against welding and grinding splashes. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 885, 884, 802, 911
* For complete information regarding product certifications, visit tranemo.co.uk
65
NEW
EN ISO 11612 A1+A2 B1 C1 E3 F1
5181 88 FLAME RETARDANT LADIES LINED TROUSERS
FLAME RETARDANT
5185 88 FLAME RETARDANT LADIES LINED CRAFTSMAN TROUSERS
PFAS-free and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets and a thin lining to achieve high protection against Electric Arc. The trousers also have a high protection against welding and grinding splashes. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 885, 884, 802, 911
66
FLAME RETARDANT
CANTEX ARC 25+ NEW
NEW
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.1
EN ISO 20471 CL.3
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
5173 88 FLAME RETARDANT LINED JACKET
PFAS-free and Inherent Flame Retardant Hi-Vis jacket with a thin lining to achieve high protection against Electric Arc. The jacket also has a high protection against welding and grinding splashes. Size: Colour: Quality:
5174 88 FLAME RETARDANT LINED BIB ’N’ BRACE
PFAS-free and Inherent Flame Retardant Hi-Vis bib ’n’ brace with a thin lining to achieve high protection against Electric Arc. The bib ’n’ brace also has a high protection against welding and grinding splashes.
XS-4XL 94 yellow/navy 885, 884, 911
Size: Colour: Quality:
NEW
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 885, 884, 911
NEW
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 20471 CL.2
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 20471 CL.2 EN ISO 15797 50 WASHES
5171 88 FLAME RETARDANT LINED TROUSERS
5176 88 FLAME RETARDANT LINED CRAFTSMAN TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant Hi-Vis trousers with a thin lining to achieve high protection against Electric Arc. The trousers also have a high protection against welding and grinding splashes.
PFAS-free and Inherent Flame Retardant Hi-Vis craftsman trousers with a thin lining to achieve high protection against Electric Arc. The trousers also have a high protection against welding and grinding splashes.
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 885, 884, 911
NEW
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 885, 884, 911
NEW EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 61482-2 APC 2 ELIM: 27,0 cal/cm² ATPV: 31,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
EN ISO 11611 CL.2 A1+A2
EN ISO 15797 50 WASHES
EN 13034 type PB[6] EN ISO 20471 CL.1 EN ISO 15797 50 WASHES
5170 88 FLAME RETARDANT LINED TROUSERS
5175 88 FLAME RETARDANT LINED CRAFTSMAN TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant Hi-Vis trousers with a thin lining to achieve high protection against Electric Arc. The trousers also have a high protection against welding and grinding splashes. 30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 885, 884, 802, 911
PFAS-free and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a thin lining to achieve high protection against Electric Arc. The trousers also have a high protection against welding and grinding splashes. 30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 885, 884, 802, 911
O
R
T
ST
RIC
T LEGISL
AT
67
IO
N
PF
SU
TO
PP
FLAME RETARDANT
CO
O
C
’S
V
SE
EM
EM
EN
CH
T
AS
WE
CANTEX ARC 25+
RP
O R AT E PF
AS
M
ZENITH LADIES CANTEX WS O
R
T
ST
RIC
T LEGISL
AT
IO
N
CO
O
C
’S
V
SE
EM
EM
EN
CH
T
AS
WE
PF
SU
TO
PP
FLAME RETARDANT
RP
O R AT E PF
AS
M
TRANEMO SKINSAFE™
37
5035 88 94
ATPV (cal/cm²)
SHIELD
32
SHIELD
CANTEX WS
ELIM (cal/cm²)
5940 92 03
CANTEX SYSTEM
920 CANTEX JX ARC RATING: 7,0 cal/cm² PPE 1
884/885 CANTEX WS ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm², PPE 2
884: Cantex Stretch, 365 g/m², LOI: 29,5%
c95mt
5035 88 94
SHIELD
6372 89 94
35
APC
884/885 CANTEX WS ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm², PPE 2
895 CANTEX JERSEY AT ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm², PPE 1
2
TRANEMO SKINSAFE™
35
5035 88 94
30
ATPV (cal/cm²)
SHIELD
ELIM (cal/cm²)
SHIELD
CANTEX SYSTEM
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
884/885 CANTEX WS ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm², PPE 2
TRANEMO SKINSAFE™ CANTEX SYSTEM ELIM (cal/cm²)
27
ATPV (cal/cm²)
31
APC
2
911 TERA TX LIGHT ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm², PPE 2
5035 88 94
885: Cantex Weld, 365 g/m², LOI: 29,0%
31
ATPV (cal/cm²)
SHIELD
Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk.
ELIM (cal/cm²)
5834 81 94
The front of the protective clothing is made from an extra durable material that prevents the fabric from burning and makes molten metal run off. Stretch material on the back of the workwear makes the garment comfortable to use thanks to the extra freedom of movement. All Flame Retardant clothing in this range is lightweight, has a modern fit and includes both a men’s and a ladies range.
CANTEX SYSTEM
SHIELD
CANTEX WELD STRETCH - PFAS-free and Inherent Flame Retardant range for work with heavy welding or molten metals. Cantex WS meets the highest level of protection against splashes of molten metal EN ISO 11612 E3 and the requirements for heavy welding EN ISO 11611 class 2.
SKIN PROTECTION
TRANEMO SKINSAFE™
5770 91 94
68
884/885 CANTEX WS ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm², PPE 2
CANTEX WS
FLAME RETARDANT
69
MEET THE GAME CHANGER CANTEX WELD STRETCH HEAVY WELDING CLASSIFICATION EN ISO 11611 CLASS 2 AND BEYOND Cantex WS fulfils E3 metal splash standards as well as meeting and exceeding heavy welding classification EN ISO 11611 Class 2. These levels of protection are vital in steel mills, heavy industry plants and other extreme workplaces where smelting takes place and splashes or sparks of hot metal are an everyday occurrence. Cantex WS has extra protection in the front of the garment, ensuring splashes run off and prevent burn through, which can have serious consequences for both the wearer and the garment. Cantex WS also has a high arc rating, is stronger than previous Cantex fabrics and has optimised high-visibility performance.
COMFORT YOU CAN TRUST Performing a physically demanding job in a high temperature environment creates special demands in terms of protection and flame / heat resistance. At the same time, keeping the wearer safe is not the only criteria. Comfort and freedom of body movement also define how efficiently the wearer can carry out their tasks. Here’s how Cantex WS harmonises wearer comfort with world-class safety. • • • • •
Garments feature stretch material in the back, allowing the wearer to move more freely with increased comfort. The front of the clothing has extra protection against molten metal and welding/grinding sparks. The Cantex Weld Stretch fabric is woven in a satin that increases the flexibility of the garments and provides comfortable protective clothing. The fabric has a low weight compared to other fabrics that can withstand heavy welding, which is positive for the user’s comfort. All garments are designed to offer a contemporary fit and our range includes specially designed male and female collections.
PFAS-FREE
PP
T
CO
O
C
’S
V
SE
EM
EM
EN
CH
We also see the need for a strict chemicals legislation, where PFAS are used to a minimum. In 2021 we joined Chemsec’s Corporate PFAS Movement - ”No to PFAS” to influence the way chemicals legislations are implemented in practice.
AS
WE
PF
SU
TO
Cantex WS was the world’s first PFAS-free Inherent Flame Retardant range with protection against chemicals like acids and alkali. PFAS is an abbreviation for per- and polyfluoroalkyl substances which are also called fluorocarbons. Fluorocarbons are often used in the manufacture of fabrics for protective clothing and create a surface to make them more resistant to chemicals, water and dirt. Unfortunately, fluorocarbons have a major negative environmental impact, because they are not degraded by nature and today there are T LEGISL RIC AT ST no effective purification methods. With our focus and commitment to sustainability and the environIO T N R O ment, we created a less harmful solution, Cantex WS - the PFAS-free Flame Retardant range.
RP
O R AT E PF
LONGER LIFE, REDUCED COSTS Cantex WS garments have a significantly improved wear and tear resistance compared to previous generations of Cantex garments. All strength values are considerably improved with as much as +200% in wear resistance in the front of the garment and up to +100% in tear resistance elsewhere. If properly cared for and cleaned, they can offer an extended product lifespan. In turn, this reduces the Total Cost of Ownership, making them a more costefficient solution over a longer period.
AS
M
CANTEX WS 3 VISIBLE O
R
T
ST
RIC
T LEGISL
AT
IO
N
PF
SU
TO
PP
FLAME RETARDANT
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 15797 50 WASHES
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
CO
O
C
’S
V
SE
EM
EM
EN
CH
T
AS
WE
70
RP
O R AT E PF
AS
M
TRANEMO SKINSAFE
6730 88 FLAME RETARDANT JACKET
6761 88 FLAME RETARDANT WAISTCOAT
6720 88 FLAME RETARDANT TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant jacket in Cantex Weld with increased visibility. Yellow back in Cantex Stretch.
PFAS-free and Inherent Flame Retardant tool vest in Cantex Weld/Cantex Stretch with increased visibility. Stretch zones in fluorescent yellow fabric.
XS-4XL 00 multi-colour 885, 884
EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm² EN 1149-5 EN ISO 15797 50 WASHES
PFAS-free and Inherent Flame Retardant trousers with increased visibility, front in Cantex Weld and back in Cantex Stretch.
XS-4XL 00 multi-colour 885, 884
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
30”- 50”R, 32”- 40”T, 28”- 48”S 00 multi-colour 885, 884, 802
TRANEMO SKINSAFE
6752 88 FLAME RETARDANT TROUSERS
6740 88 FLAME RETARDANT BIB ’N’ BRACE
Size: Colour: Quality:
Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant trousers with increased visibility, nail pockets, front in Cantex Weld and back in Cantex Stretch. 30”- 50”R, 32”- 40”T, 30”- 48”S 00 multi-colour 885, 884, 802
PFAS-free and Inherent Flame Retardant bib ’n’ brace with increased visibility, front in Cantex Weld and back in Cantex Stretch. 30”- 50”R, 32”- 40”T, 34”- 48”S 00 multi-colour 885, 884
6710 88 FLAME RETARDANT BOILERSUIT
PFAS-free and Inherent Flame Retardant boilersuit with increased visibility. Sleeves and front in Cantex Weld and back in Cantex Stretch. Size: Colour: Quality:
XS-4XL 00 multi-colour 885, 884, 802
CANTEX WS 3 VISIBLE LADIES Fluorocarbon free fabric for reduced environmental impact.
71
High, protecting collar. Fluorescent Cantex Weld.
Two loops for communication equipment.
FLAME RETARDANT
Reflective stripes on shoulders for visibility from above.
Chest pocket with flap, tool strap and concealed keyring holder for ID-pocket.
Fluorescent stretch fabric for high comfort.
Reflective stripes for increased visibility sewn with waterfall principle so that molten metal can run off.
Roomy side pockets with flap.
Inherent flame retardant material in extra strong Cantex Weld.
Larger zip pocket.
Extended back and two side slits for enhanced movement.
Adjustable cuffs.
EN ISO 11612 A1+A2 B1 C1 E3 F1 EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm² EN 1149-5
6737 88 FLAME RETARDANT LADIES JACKET
EN ISO 11611 CL.2 A1+A2
PFAS-free and Inherent Flame Retardant ladies jacket in Cantex Weld/Cantex Stretch with increased visibility. Yellow back in Cantex Stretch.
EN 13034 type PB[6]
Size: Colour: Quality:
EN ISO 15797 50 WASHES
Ladies S-XXL 00 multi-colour 885, 884
TRANEMO SKINSAFE
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 15797 50 WASHES
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
TRANEMO SKINSAFE
EN 13034 type PB[6] EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
TRANEMO SKINSAFE
6729 88 FLAME RETARDANT LADIES TROUSERS
6759 88 FLAME RETARDANT TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant ladies trousers with increased visibility, front in Cantex Weld and back in Cantex Stretch. Ladies 6-20 00 multi-colour 885, 884, 802
PFAS-free and Inherent Flame Retardant ladies trousers with increased visibility, nail pockets, front in Cantex Weld and back in Cantex Stretch. Ladies 8-20 00 multi-colour 885, 884, 802
6799 88 FLAME RETARDANT MATERNITY TROUSERS
PFAS-free and Inherent Flame Retardant maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. Wide elastic band in the back of the waist. Size: Colour: Quality:
Ladies 6-20 00 multi-colour 885, 884, 802, 050
72
FLAME RETARDANT
CANTEX WS HIGH VISIBILITY
NEW
NEW
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 20471 CL.2
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 20471 CL.2
TRANEMO SKINSAFE
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5023 88 FLAME RETARDANT TROUSERS
5053 88 FLAME RETARDANT CRAFTSMAN TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant Hi-Vis trousers with front in Cantex Weld for high protection against molten metal and heavy welding. Cantex Stretch at the back provides flexibility and freedom of movement with high levels of comfort.
PFAS-free and Inherent Flame Retardant Hi-Vis trousers with tool pockets and front in Cantex Weld for high protection against molten metal and heavy welding. Cantex Stretch at the back provides flexibility and freedom of movement with high levels of comfort.
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 885, 884
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 885, 884
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
EN ISO 11611 CL.2 A1+A2
EN ISO 15797 50 WASHES
EN 13034 type PB[6]
TRANEMO SKINSAFE
EN ISO 20471 CL.1 EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5020 88 FLAME RETARDANT TROUSERS
5050 88 FLAME RETARDANT CRAFTSMAN TROUSERS
PFAS-free and Inherent Flame Retardant Hi-Vis trousers with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant Hi-Vis trousers with nail pockets, front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 885, 884, 802
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.1
EN ISO 20471 CL.3
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 885, 884, 802
5040 88 FLAME RETARDANT BIB ’N’ BRACE
5010 88 FLAME RETARDANT BOILERSUIT
Size: Colour: Quality:
Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant Hi-Vis bib ’n’ brace with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the bib ’n’ brace with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. 30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 885, 884
PFAS-free and Inherent Flame Retardant Hi-Vis boilersuit with sleeves and front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the boilersuit with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. XS-4XL, M-3XL Tall 94 yellow/navy 884, 885
CANTEX WS HIGH VISIBILITY
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.1 A1
EN 13034 type PB[6]
EN ISO 20471 CL.2
EN ISO 20471 CL.3
EN ISO 15797 50 WASHES
FLAME RETARDANT
73
9094 80 FLAME RETARDANT TOOL POCKETS
Loose Nail pockets to be placed on belt 9093 00 and fits well on for example rail cutting trousers 5024 88. Size: Colour: Quality:
EN ISO 15797 50 WASHES
One size 55 yellow 802, 885
TRANEMO SKINSAFE
Size: Colour: Quality:
One size 07 black Leather
O
R
T
ST
RIC
T LEGISL
AT
IO
N TO
PF
T
AS
EM
EN
CH SE
EM
30”- 50”R, 32”- 40”T, 34”- 48”S 99 yellow/anthracite 884, 811, 802
C
’S
V
Size: Colour: Quality:
Leather belt with covered metal buckle with no exposed metal which is a requirement for Electric Arc garments. Also helps protect against risk of scratching when working in sensitive environments.
CO
O
XS-4XL 94 yellow/navy 885, 884
9093 00 LEATHER BELT
PP
Size: Colour: Quality:
Inherent Flame Retardant rail cutting trousers extra reinforced with Barricader fabric which provides a high protection against metal splashes. The back of the trousers have Cantex Stretch fabric for increased comfort.
SU
PFAS-free and Inherent Flame Retardant Hi-Vis jacket with sleeves and front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the jacket with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes.
5024 88 FLAME RETARDANT RAIL CUTTING TROUSERS
WE
5035 88 FLAME RETARDANT JACKET
RP
O R AT E PF
AS
M
74
FLAME RETARDANT
CANTEX WS VISIBLE
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
*EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 34,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
*EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN ISO 15797 50 WASHES
EN 13034 type PB[6]
EN 13034 type PB[6]
*EN 342 (5701+5122)
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5701 88 FLAME RETARDANT WINTER JACKET
5730 88 FLAME RETARDANT JACKET
PFAS-free and Inherent Flame Retardant Winter jacket with increased visibility, sleeves and front in Cantex Weld and back in Cantex Stretch. The jacket has a quilted lining and fleece in collar. Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant jacket with increased visibility on sleeves and front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the jacket with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes.
XXS-4XL 94 yellow/navy 885, 884, 055, 054, 893
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
TRANEMO SKINSAFE
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
5761 88 FLAME RETARDANT CRAFTSMAN WAISTCOAT
PFAS-free and Inherent Flame Retardant tool vest with increased visibility. Size: Colour: Quality:
XS-4XL 94 yellow/navy 885, 884
XS-4XL 94 yellow/navy 885, 884
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5720 88 FLAME RETARDANT TROUSERS
5752 88 FLAME RETARDANT CRAFTSMAN TROUSERS
PFAS-free and Inherent Flame Retardant trousers with increased visibility, front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes.
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5740 88 FLAME RETARDANT BIB ’N’ BRACE
ST
RIC
T LEGISL
AT
IO
N TO
PF AS
XS-4XL, M-3XL Tall 94 yellow/navy 885, 884
T
’S
C
* For complete information regarding product certifications, visit tranemo.co.uk
Size: Colour: Quality:
SE
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 885, 884
O
R
EM
Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant boilersuit with increased visibility. Sleeves and front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the boilersuit with flexibility and gives you freedom of movement and high comfort whilst Cantex Weld at the front gives you extra high protection against welding and grinding splashes.
CH
PFAS-free and Inherent Flame Retardant bib ’n’ brace with increased visibility, front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the bib ’n’ brace with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes.
5710 88 FLAME RETARDANT BOILERSUIT
T
EN ISO 11611 CL.2 A1+A2
EN
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EM
EN 1149-5
V
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
PP
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
SU
EN ISO 11612 A1+A2 B1 C1 E3 F1
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 885, 884, 802
CO
O
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy 885, 884, 802
WE
Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant trousers with increased visibility, nail pockets, front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort.
RP
O R AT E PF
AS
M
CANTEX WS
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 15797 50 WASHES
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
TRANEMO SKINSAFE
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
FLAME RETARDANT
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5420 88 FLAME RETARDANT TROUSERS
PFAS-free and Inherent Flame Retardant trousers with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 03 navy 885, 884, 802
5452 88 FLAME RETARDANT CRAFTSMAN TROUSERS
6351 88 FLAME RETARDANT STRETCH CHINOS
PFAS-free and Inherent Flame Retardant trousers with nail pockets, front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort. Size: Colour: Quality:
PFAS-free, Non-Metal and Inherent Flame Retardant stretch chinos with increased movement and high levels of comfort for varying work environments. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 03 navy 885, 884, 802
30”- 50”R, 32”- 40”T, 30”- 48”S 03 navy 884
EN ISO 11612 A1+A2 B1 C1 E3 F1 EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm² EN 1149-5 EN ISO 11611 CL.2 A1+A2 EN 13034 type PB[6] EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5431 88 FLAME RETARDANT JACKET
PFAS-free and Inherent Flame Retardant jacket in Cantex Weld/Cantex Weld Stretch. Size: Colour: Quality:
XS-4XL 03 navy 885, 884, 811
EN ISO 11612 A1+A2 B1 C1 E3 F1 EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm² EN 1149-5 EN ISO 11611 CL.2 A1+A2 EN 13034 type PB[6] EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5440 88 FLAME RETARDANT BIB ’N’ BRACE
PFAS-free and Inherent Flame Retardant bib ’n’ brace with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the bib ’n’ brace with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 03 navy 885, 884
75
FLAME RETARDANT
76
CANTEX WS HIGH VISIBILITY LADIES
NEW
NEW
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 20471 CL.2
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN 13034 type PB[6]
EN ISO 20471 CL.2
TRANEMO SKINSAFE
EN ISO 20471 CL.3 CL.2* (S-XL)
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5028 88 FLAME RETARDANT LADIES TROUSERS
5058 88 FLAME RETARDANT LADIES CRAFTSMAN TROUSERS
PFAS-free and Inherent Flame Retardant Hi-Vis ladies trousers with front in Cantex Weld for high protection against molten metal and heavy welding. Cantex Stretch at the back provides flexibility and freedom of movement with high levels of comfort. Size: Colour: Quality:
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
PFAS-free and Inherent Flame Retardant Hi-Vis ladies trousers with tool pockets and front in Cantex Weld for high protection against molten metal and heavy welding. Cantex Stretch at the back provides flexibility and freedom of movement with high levels of comfort.
Ladies 8-20, 8T-20T 94 yellow/navy 885, 884
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 20471 CL.1
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN 13034 type PB[6]
EN ISO 20471 CL.1
TRANEMO SKINSAFE
EN ISO 20471 CL.1
TRANEMO SKINSAFE
5027 88 FLAME RETARDANT LADIES TROUSERS
PFAS-free and Inherent Flame Retardant Hi-Vis ladies trousers with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement and high comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 885, 884, 802
O
R
T
ST
RIC
T LEGISL
AT
IO
N
CO
O
C
’S
V
SE
EM
EM
EN
CH
T
AS
WE
PF
SU
TO
PP
* For complete information regarding product certifications, visit tranemo.co.uk
RP
O R AT E PF
AS
M
5057 88 FLAME RETARDANT LADIES CRAFTSMAN TROUSERS
PFAS-free and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets, front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 885, 884, 802
PFAS-free and Inherent Flame Retardant Hi-Vis ladies jacket with sleeves and front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the jacket with flexibility and gives you freedom of movement with high levels of comfort whilst Cantex Weld at the front gives you extra high protection against welding and grinding splashes. Size: Colour: Quality:
Ladies 8-20, 8T-20T 94 yellow/navy 885, 884
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 15797 50 WASHES
5037 88 FLAME RETARDANT LADIES JACKET
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
Ladies S-XXL 94 yellow/navy 885, 884
5097 88 FLAME RETARDANT MATERNITY TROUSERS
PFAS-free and Inherent Flame Retardant Hi-Vis maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 885, 884, 802, 050
CANTEX WS VISIBLE / CANTEX WS LADIES
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 34,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
*EN 342 (5703+5122)
EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5703 88 FLAME RETARDANT LADIES WINTER JACKET
PFAS-free and Inherent Flame Retardant ladies Winter jacket with increased visibility, sleeves and front in Cantex Weld and back in Cantex Stretch. The jacket has a quilted lining and fleece in collar. Size: Colour: Quality:
PFAS-free and Inherent Flame Retardant ladies jacket with increased visibility, sleeves and front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the jacket with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes.
Ladies S-XXL 94 yellow/navy 885, 884, 055, 054, 893
Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 885, 884
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 15797 50 WASHES
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
TRANEMO SKINSAFE
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
5759 88 FLAME RETARDANT LADIES CRAFTSMAN TROUSERS
5729 88 FLAME RETARDANT LADIES TROUSERS
PFAS-free and Inherent Flame Retardant ladies trousers with increased visibility, front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. Size: Colour: Quality:
TRANEMO SKINSAFE
Size: Colour: Quality:
Ladies 6-20 94 yellow/navy 885, 884, 802
Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 885, 884, 802
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
EN 61482-2 APC 1 ELIM: 12,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 15797 50 WASHES
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
TRANEMO SKINSAFE
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
5799 88 FLAME RETARDANT MATERNITY TROUSERS
PFAS-free and Inherent Flame Retardant maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back.
PFAS-free and Inherent Flame Retardant ladies trousers with increased visibility, nail pockets, front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort.
EN ISO 11612 A1+A2 B1 C1 E3 F1
TRANEMO SKINSAFE
77
5737 88 FLAME RETARDANT LADIES JACKET
EN ISO 11612 A1+A2 B1 C1 E3 F1
TRANEMO SKINSAFE
FLAME RETARDANT
Ladies 6-20 94 yellow/navy 885, 884, 802, 050
EN ISO 15797 50 WASHES
5429 88 FLAME RETARDANT LADIES TROUSERS
PFAS-free and Inherent Flame Retardant ladies trousers with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. Size: Colour: Quality:
Ladies 6-20 03 navy 885, 884, 802
5459 88 FLAME RETARDANT LADIES CRAFTSMAN TROUSERS
PFAS-free and Inherent Flame Retardant ladies trousers with nail pockets, front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort. Size: Colour: Quality:
* For complete information regarding product certifications, visit tranemo.co.uk
Ladies 8-20 03 navy 885, 884, 802
TRANEMO SKINSAFE
6356 88 FLAME RETARDANT LADIES STRETCH CHINOS
PFAS-free, Non-Metal and Inherent Flame Retardant ladies stretch chinos with excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies 8-20 03 navy 884
FLAME RETARDANT
O
R
T
ST
RIC
T LEGISL
AT
IO
ZENITH LADIES CANTEX 57
N
CO
O
C
’S
V
SE
EM
EM
EN
CH
T
AS
WE
PF
SU
TO
PP
RP
O R AT E PF
AS
M
CANTEX 57 CANTEX 57 is our range of Inherent Flame Retardant garments for metal industries with the highest levels of protection against molten iron, E3. The collection offers a good protection against Electric Arc accidents and is certified for welding. Additionally, your visibility is enhanced with details in High-Visibility and reflective material. The range also includes ladies’ garments. Standard quality and washing instruction for the range: The garments in the range may consist of more and/ or other qualities. See quality specification for each product or or visit tranemo.co.uk. 883: Cantex 2.0, 350 g/m², LOI: 32,3% 882: Fluorescent, Cantex 2.0 HV, 350 g/m², EN ISO 20471, LOI: 32,3%
The products on this section are certified according to:
C2
RHTI24 (s)
26,6
SHIELD
RADIANT HEAT (class)
5736 88 94
TWO LAYER SYSTEM
5940 92 03
TRANEMO SKINSAFE™
SKIN PROTECTION
c95mt
920 CANTEX JX RADIANT HEAT: C1
883 CANTEX 2.0 RADIANT HEAT: C1
25
ATPV (cal/cm²)
27
APC
2
SHIELD
ELIM (cal/cm²)
920 CANTEX JX ARC RATING: 7,0 cal/cm² PPE 1
5736 88 94
CANTEX SYSTEM
5940 92 03
TRANEMO SKINSAFE™ SKIN PROTECTION
78
883 CANTEX 2.0 ELIM: 9,2 cal/cm² ATPV: 13,0 cal/cm², PPE 2
CANTEX 57
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 9,2 cal/cm² ATPV: 13,0 cal/cm²
EN 61482-2 APC 1 ELIM: 9,2 cal/cm² ATPV: 13,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5716 88 FLAME RETARDANT BOILERSUIT
Inherent Flame Retardant bib ’n’ brace with increased visibility, in a material with good protection against several molten metals and highest possible protection against molten iron. PFAS-free.
XS-3XL 94 yellow/navy 883, 882
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 9,2 cal/cm² ATPV: 13,0 cal/cm²
EN 61482-2 APC 1 ELIM: 9,2 cal/cm² ATPV: 13,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
TRANEMO SKINSAFE
5736 88 FLAME RETARDANT JACKET
TRANEMO SKINSAFE
Inherent Flame Retardant jacket with increased visibility, in a material with good protection against several molten metals and highest possible protection against molten iron. PFAS-free. Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 1 ELIM: 9,2 cal/cm² ATPV: 13,0 cal/cm²
EN 61482-2 APC 1 ELIM: 9,2 cal/cm² ATPV: 13,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
Inherent Flame Retardant ladies jacket with increased visibility, in a material with good protection against several molten metals and highest possible protection against molten iron. PFAS-free. Size: Colour: Quality:
Ladies XS-3XL 94 yellow/navy 883, 882
5726 88 FLAME RETARDANT TROUSERS
Size: Colour: Quality:
XS-3XL 94 yellow/navy 883, 882
5739 88 FLAME RETARDANT LADIES JACKET
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 883, 882
Inherent Flame Retardant trousers with increased visibility, in a material with good protection against several molten metals and highest possible protection against molten iron. PFAS-free.
EN ISO 11612 A1+A2 B1 C1 E3 F1
TRANEMO SKINSAFE
79
5742 88 FLAME RETARDANT BIB ’N’ BRACE
Inherent Flame Retardant boilersuit with increased visibility, in a material with good protection against several molten metals and highest possible protection against molten iron. PFAS-free. Size: Colour: Quality:
FLAME RETARDANT
TRANEMO SKINSAFE
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy 883, 882
5727 88 FLAME RETARDANT LADIES TROUSERS
Inherent Flame Retardant ladies trousers with increased visibility, in a material with good protection against several molten metals and highest possible protection against molten iron. PFAS-free. Size: Colour: Quality:
Ladies 6-18 94 yellow/navy 883, 882
FLAME RETARDANT
O
R
T
ST
RIC
T LEGISL
AT
IO
ZENITH LADIES OUTBACK HEAVY WELDING
N
CO
O
C
’S
V
RP
O R AT E PF
AS
M
OUTBACK HW
OUTBACK HEAVY WELDING - welding garments for heavy welding with an unrivalled combination of durability and comfort. You will no longer have to wear garments that are too warm, too stiff or garments that do not withstand the sparks and spatter from welding. The mix of inherent fibres makes the range unique and extremely durable. The ventilation under the arms and on the back makes the clothes extra comfortable. The durability of the Outback HW range is outstanding and the design makes them very breathable with a comfortable fit. The enhanced visibility also adds that little bit of extra protection for the wearer. With a stylish design, high comfort and a long service life, Outback HW is a really good investment. Outback HW is also a good choice from a sustainability perspective as the entire range is PFAS-free. We take responsibility for how our business affects people, animals and the environment and we are working hard to phase out PFAS from our products to minimise the use of chemicals. Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk.
The products on this section are certified according to:
863: Outback HW, 425 g/m², LOI: 28,9% 885: Reinforc. fabric, Cantex Weld, 365 g/m², LOI: 29,0%
RADIANT HEAT (class)
C2
RHTI24 (s)
28,3
SHIELD
TWO LAYER SYSTEM
920 CANTEX JX RADIANT HEAT: C1
5530 86 67
TRANEMO SKINSAFE™
5940 92 03
c95mt
SKIN PROTECTION
SE
EM
EM
EN
CH
T
AS
WE
PF
SU
TO
PP
80
863 OUTBACK HW RADIANT HEAT: C1
OUTBACK HEAVY WELDING
FLAME RETARDANT
WORLD CLASS PROTECTION, DURABILITY AND COMFORT In welding operations, a lot of UV and heat radiation is created. Therefore, Tranemo has added covered ventilations to increase the users comfort and avoid heat stress. The fabric Outback HW is also tested according to the UV standard EN 410 which calculates the protection against UV-A, UV-B and UV-C and evaluates the maximum duration time for different welding techniques. The test shows that you can perform any type of welding for over 8 hours wearing Outback HW and have UV protection throughout. Welding Technique Maximum Duration (h)
TIG (CrNi) 44,12
TIG (Al) 61,95
MAG (St:37) 13,22
MAG (CrNi) 8,94
MIG with pulse MIG w/o pulse Electrode (Al) (Al) (St:37) 40,68 17,93 18,56
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 2
EN 61482-2 APC 2
EN 61482-2 APC 2
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
5530 86 WELDING JACKET
PFAS-free welding jacket for heavy welding with a long lifetime and very high protection against radiant heat and metal splashes. The soft fabric with extremely good welding properties and the ventilation in the back makes the jacket extra comfortable to use when welding. Size: Colour: Quality:
XS-4XL 67 anthracite 863, 885, 885
5552 86 WELDING CRAFTSMAN TROUSERS
5520 86 WELDING TROUSERS
PFAS-free welding trousers for heavy welding with increased visibility, nail pockets and a soft fabric with extremely good welding properties. The trousers have a long lifetime and very high protection against radiant heat and metal splashes.
PFAS-free welding trousers for heavy welding with increased visibility and a soft fabric with extremely good welding properties. The trousers have a long lifetime and very high protection against radiant heat and metal splashes. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 67 anthracite 863, 885, 885
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 67 anthracite 863, 885, 885
NEW EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 2
EN 61482-2 APC 2
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
5510 86 WELDING BOILERSUIT
PFAS-free welding boilersuit for heavy welding with a long lifetime and very high protection against radiant heat and metal splashes. The soft fabric with extremely good welding properties and the ventilation in the back makes the boilersuit extra comfortable to use when welding. Size: Colour: Quality:
XS-4XL 67 anthracite 863, 885, 885
5541 86 WELDING BIB ’N’ BRACE
PFAS-free welding bib ’n’ braces for heavy welding with increased visibility and a soft fabric with extremely good welding properties. The bib ’n’ braces have a long lifetime and very high protection against radiant heat and metal splashes. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 67 anthracite 863, 885
81
FLAME RETARDANT
MAGMA O
R
T
ST
RIC
T LEGISL
AT
IO
N
CO
O
C
’S
V
SE
EM
EM
EN
CH
T
AS
WE
PF
SU
TO
PP
82
RP
O R AT E PF
MAGMA Magma was developed to withstand the splashes of molten iron, steel, aluminium and many other metals and alloys. The collection is developed for the demanding environment of a primary aluminium works and is certified with the highest protection against aluminium (D3) and iron (E3). Magma has reinforcements on particularly vulnerable areas and has a high protection against radiant heat. The increased visibility provides protection against incidents in industrial environments. All for a safer workplace. To achieve the best washing result, contact Tranemo for special washing instructions. Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk. 873: Magma C, 370 g/m², ISO 9185 Cryolite, LOI: 25,9% 874: Fluorescent, Magma HV, 375 g/m², ISO 9185 Cryolite, EN ISO 20471, LOI: 33,4%
C2
RHTI24 (s)
25,8
SHIELD
RADIANT HEAT (class)
901 MERINO RX RADIANT HEAT: C1
5635 87 94
TWO LAYER SYSTEM
6315 90 07
TRANEMO SKINSAFE™
SKIN PROTECTION
d95mt
873 MAGMA HV RADIANT HEAT: C1
MAGMA LADIES NEW EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
IEC 61482-2 CL.1 ARC RATING: 9,5 cal/cm²
EN 61482-2 APC 1 ELIM: 6,0 cal/cm² ATPV: 7,4 cal/cm²
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.1 A1+A2
5639 87 FLAME RETARDANT LADIES JACKET
Inherent Flame Retardant ladies jacket in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 873, 874
5678 87 FLAME RETARDANT LADIES SHIRT
Non-Metal and Inherent Flame Retardant Ladies Shirt made from a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 875
AS
M
MAGMA
FLAME RETARDANT
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
IEC 61482-2 CL.1 ARC RATING: 9,5 cal/cm²
IEC 61482-2 CL.1 ARC RATING: 9,5 cal/cm²
EN 61482-2 APC 1 ELIM: 6,0 cal/cm² ATPV: 7,4 cal/cm²
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.1 A1+A2
5632 87 FLAME RETARDANT COAT
5635 87 FLAME RETARDANT JACKET
Non-Metal and Inherent Flame Retardant coat suitable to be worn over a jacket. Comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. Size: Colour: Quality:
5674 87 FLAME RETARDANT SHIRT
Inherent Flame Retardant jacket in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free. Size: Colour: Quality:
XS-4XL 94 yellow/navy 873, 874
Non-Metal and Inherent Flame Retardant shirt made from a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free.
XS-4XL 94 yellow/navy 873, 874
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
IEC 61482-2 CL.1 ARC RATING: 9,5 cal/cm²
IEC 61482-2 CL.1 ARC RATING: 9,5 cal/cm²
IEC 61482-2 CL.1 ARC RATING: 9,5 cal/cm²
EN ISO 11611 CL.2 A1+A2
83
XS-4XL 94 yellow/navy 875
EN ISO 11611 CL.1 A1+A2
5625 87 FLAME RETARDANT TROUSERS
Inherent Flame Retardant trousers in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 873, 874
5655 87 FLAME RETARDANT CRAFTSMAN TROUSERS
5626 87 FLAME RETARDANT TROUSERS, SHOE PROTECTION
Inherent Flame Retardant trousers with nail pockets. The trousers are made in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free.
Inherent Flame Retardant trousers with shoe protection in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free.
Size: Colour: Quality:
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 873, 874
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
EN ISO 11612 A1 B1 C1 F1
IEC 61482-2 CL.1 ARC RATING: 9,5 cal/cm²
IEC 61482-2 CL.1 ARC RATING: 9,5 cal/cm²
IEC 61482-2 CL.1 ARC RATING: 9,5 cal/cm²
EN ISO 11611 CL.2 A1+A2
EN ISO 11611 CL.1 A1+A2
5628 87 FLAME RETARDANT LADIES TROUSERS
Inherent Flame Retardant ladies trousers in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 873, 874
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 873, 874, 802
5629 87 FLAME RETARDANT LADIES TROUSERS, SHOE PROTECTION
5656 87 FLAME RETARDANT CRAFTSMAN TROUSERS, SHOE PROTECTION
Size: Colour: Quality:
Size: Colour: Quality:
Inherent Flame Retardant ladies trousers with shoe protection in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free. Ladies 8-20 94 yellow/navy 873, 874, 802
Inherent Flame Retardant trousers with shoe protection in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free. 30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 873, 874, 802
84
FLAME RETARDANT
ZENITH LADIES APEX
APEX
APEX solves protection problems for work situations where there have been difficulties to cope with chemical splashes and at the same time avoid work in a chemical suit. The material in the garments is a 300 g/m² dope-dyed Aramid, which not only passes the tests for acid and alkali according to EN13034, but also for aromatic hydrocarbons and alcohol. The dope-dyed Aramid makes the fabric withstand lots of industrial washes without bleaching. At the same time the Aramid fibre is resistant to many chemicals. APEX also works great when working with molten zinc, since the degradation temperature in the fabric is higher than the melting point of zinc. The zinc does not run off, but does not burn holes in the garment either and can be removed mechanically as quickly as possible to avoid the risk of getting burned. A perfect alternative in the absence of textiles where zinc runs off. Several of the protective garments are lined with an extra layer of fabric in the front, which increases the level of protection even further. Also, some of the trousers are provided with shoe protection and extra reinforcements against chemical splashes down at the front of the legs. Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk. 830: Apex 300, 300g/m², LOI: 28,0% 832: Apex 220, 220g/m², LOI: 28,0%
c95mt
APEX
EN ISO 11612 A1+A2 B1 C1 F1
Flame Retardant jacket with double yoke to achieve extra protection against heat. The jacket is made of a strong and flexible satin customised for work with zinc and chemicals.
EN 1149-5
EN 13034 type PB[6]
Pockets with covered openings for protection against zinc and chemicals.
EN ISO 11612 A1+A2 B1 C1 F1
Double fabric for extra protection against radiant heat.
Size: Colour: Quality:
EN ISO 11611 CL.1 A1+A2
85
The protective clothing in the Apex collection is woven in a strong, smooth satin specially developed for work with chemicals and molten zinc.
6630 83 FLAME RETARDANT JACKET
EN 61482-2 APC 1 ELIM: 9,4 cal/cm² ATPV: 12,0 cal/cm²
FLAME RETARDANT
XS-4XL 94 yellow/navy 830, 832
6623 83 FLAME RETARDANT TROUSERS, SHOE PROTECTION
EN 61482-2 APC 1 ELIM: 9,4 cal/cm² ATPV: 12,0 cal/cm²
Flame Retardant trousers with shoe protection and double fabric in front for extra protection against heat. The trousers are made of a strong and flexible satin customised for work with zinc and chemicals.
EN 1149-5 EN ISO 11611 CL.1 A1+A2
Size: Colour: Quality:
EN 13034 type PB[6]
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 830, 802, 911
Very durable Barricader (545 g/m²).
Foot protection.
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 9,4 cal/cm² ATPV: 12,0 cal/cm²
EN 61482-2 APC 1 ELIM: 9,4 cal/cm² ATPV: 12,0 cal/cm²
EN 61482-2 APC 1 ELIM: 9,4 cal/cm² ATPV: 12,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.1 A1+A2
EN ISO 11611 CL.1 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
6621 83 FLAME RETARDANT TROUSERS
6622 83 FLAME RETARDANT TROUSERS
Flame Retardant trousers with offset side seams and double fabric in front for extra protection against heat. The trousers are made of a strong and flexible satin customised for work with zinc and chemicals. Size: Colour: Quality:
6653 83 FLAME RETARDANT CRAFTSMAN TROUSERS
Inherent Flame Retardant trousers, made of a strong and flexible satin customised for work with zinc and chemicals. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 830, 832, 911
Inherent Flame Retardant trousers with nail pockets made of a strong and flexible satin. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 832, 830
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 9,4 cal/cm² ATPV: 12,0 cal/cm²
EN 61482-2 APC 1 ELIM: 9,4 cal/cm² ATPV: 12,0 cal/cm²
EN 61482-2 APC 1 ELIM: 9,4 cal/cm² ATPV: 12,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.1 A1+A2
EN ISO 11611 CL.1 A1+A2
EN 13034 type PB[6]
EN 13034 type PB[6]
6620 83 FLAME RETARDANT TROUSERS
Flame Retardant trousers with offset side seams and double fabric in front for extra protection against heat. The trousers are made of a strong and flexible satin customised for work with zinc and chemicals. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 03 navy 830, 911
6624 83 FLAME RETARDANT TROUSERS
Inherent Flame Retardant trousers made of a strong and flexible satin customised for work with zinc and chemicals. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 03 navy 830
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 832, 830
6654 83 FLAME RETARDANT TROUSERS
Inherent Flame Retardant trousers with nail pockets, made of a strong and flexible satin. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 03 navy 830
FLAME RETARDANT
86
ZENITH LADIES
ZENITH ZENITH is designed to make you highly visible in environments where risks can also arise from high voltage as well as metal working. The HV orange colour is certified according to EN ISO 20471 and is required by many for its excellent visibility in snow. It is also a good option for many other companies that want Flame Retardant, High-Visibility orange garments. ZENITH is Non-Metal and provides protection against Electric Arc incidents and the design offers excellent functionality for the wearer. When used together with our welding accessories, the range also performs well for cutting and welding. Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or at tranemo.co.uk.
The products on this section are certified according to:
846: Fluorescent, Ara TX, 260 g/m², LOI: 30,1% 811: Tera TX, 260 g/m², LOI: 29,8%
c95nt
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 30,0 cal/cm²
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 30,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.1 A1
**EN ISO 11611 CL.1 A1
EN 13034 type PB[6]
**EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (S-M)
EN ISO 20471 CL.3 CL.2* (S-M)
EN 343 3.1 **EN 342 (5206+5202) RIS-3279-TOM
5206 82 FLAME RETARDANT LADIES WINTER JACKET
Non-Metal and Inherent Flame Retardant ladies Hi-Vis winter jacket with taped seams and quilted lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy 822, 932, 054, 055, 893
EN 343 3.1 ***EN 342 (5209+5202) RIS-3279-TOM
9151 82 FLAME RETARDANT HOOD
5209 82 FLAME RETARDANT LADIES WINTER JACKET, HOOD
Adjustable hood with wind and waterproof jersey lining. Can be attached to articles 5205 82 and 5206 82.
Non-Metal and Inherent Flame Retardant ladies Hi-Vis winter jacket with removable hood, taped seams and quilted lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
Size: Colour: Quality:
Ladies S-XXL 93 orange/navy 822, 932, 054, 055, 893
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1
*EN ISO 20471 CL.2 CL.1 (S-L)
EN 13034 type PB[6] EN ISO 20471 CL.3 CL.2* (S-M)
EN 13034 type PB[6] EN ISO 20471 CL.3 CL.2* (S-M) TRANEMO SKINSAFE
One size 50 orange 822, 054
5219 95 FLAME RETARDANT LADIES SOFTSHELL JACKET
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis ladies softshell jacket with very high comfort. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy 951, 950, 804
* For complete information regarding product certifications, visit tranemo.co.uk
5267 95 FLAME RETARDANT LADIES SOFTSHELL WAISTCOAT Non-Metal, wind and water resistant Inherent Flame Retardant ladies softshell waistcoat. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy 951, 950, 804
RIS-3279-TOM TRANEMO SKINSAFE
5237 84 FLAME RETARDANT LADIES JACKET
Non-Metal and Inherent Flame Retardant Hi-Vis ladies jacket in a comfortable and tear resistant fabric with good colourfastness. The jacket is suitable for work within high voltage environments and where High Visibility is also required. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy 846, 811
ZENITH LADIES TRANEMO SKINSAFE™
APC
20
951 WINDTECH FR HVO ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm², PPE 2
SHIELD
5237 84 93
14
ATPV (cal/cm²)
6314 90 82
SHIELD 895 CANTEX JERSEY AT ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm², PPE 1
2
ELIM (cal/cm²)
SKIN PROTECTION
40
5219 95 93
35
ATPV (cal/cm²)
ZENITH SYSTEM 6373 89 94
ELIM (cal/cm²)
87
TRANEMO SKINSAFE™ SKIN PROTECTION
WINTER SYSTEM
FLAME RETARDANT
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
846 Ara TX ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm², PPE 1
NEW EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.1
EN ISO 20471 CL.2 CL.1 (8)
EN ISO 20471 CL.2 CL.1 (8)
EN 13034 type PB[6]
*RIS-3279-TOM
*RIS-3279-TOM
TRANEMO SKINSAFE
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5225 84 FLAME RETARDANT HI-VIS LADIES TROUSERS
5224 84 FLAME RETARDANT LADIES TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with covered pocket openings for work with chemicals. Size: Colour: Quality:
5257 84 FLAME RETARDANT LADIES TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers in a comfortable and tear resistant fabric with good colourfastness. The High Visibility trousers are are well suited for work in electrical installations where there is a risk of Electric Arc.
Ladies 8-20, 8T-20T 93 orange/navy 811, 846
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets in a comfortable and tear resistant fabric with good colourfastness. Size: Colour: Quality:
Ladies 8-20 93 orange/navy 846, 811, 804
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN ISO 20471 CL.2
RIS-3279-TOM
RIS-3279-TOM
RIS-3279-TOM
TRANEMO SKINSAFE
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5286 84 FLAME RETARDANT LADIES STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies 6-20 93 orange/navy 846, 811, 852, 804
5297 84 FLAME RETARDANT LADIES CRAFTSMAN STRETCH TROUSERS
5291 84 FLAME RETARDANT MATERNITY STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis maternity trousers with stretch for excellent fit. Knitted fabric and buttonhole elastic at the top allowing for different stages of the pregnancy. The trousers have specific stretch areas and a wide elastic band in the back and increased comfort ensuring full mobility at work.
Ladies 6-20 93 orange/navy 846, 811, 852, 804
Size: Colour: Quality:
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 23,0 cal/cm² ATPV: 33,0 cal/cm²
EN 61482-2 APC 2 ELIM: 23,0 cal/cm² ATPV: 33,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2 CL.1 (8)
EN ISO 20471 CL.2 CL.1 (8)
*EN 342 (5202+5206 or 5209)
*EN 342 (5202+5206 or 5209)
**RIS-3279-TOM
**RIS-3279-TOM
5202 84 FLAME RETARDANT LADIES TROUSERS, WINDBREAKER Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with a windproof jersey lining. The High Visibility trousers are well suited for work in electrical installations where there is a risk of Electric Arc. Size: Colour: Quality:
Ladies 8-20 93 orange/navy 846, 811, 804, 898
* For complete information regarding product certifications, visit tranemo.co.uk
Ladies 8-20 93 orange/navy 846, 811, 804
Ladies 6-20 93 orange/navy 846, 811, 852, 804
5258 84 FLAME RETARDANT LADIES TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets and a windproof jersey lining. Size: Colour: Quality:
Ladies 8-20 93 orange/navy 846, 811, 898, 804
FLAME RETARDANT
ZENITH
TRANEMO SKINSAFE™
APC
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 30,0 cal/cm²
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 30,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.1 A1
**EN ISO 11611 CL.1 A1
EN 13034 type PB[6]
**EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (XS)
EN ISO 20471 CL.3 CL.2* (XS)
EN 343 3.1 **EN 342 (5205+5201) RIS-3279-TOM
5205 82 FLAME RETARDANT WINTER JACKET
Non-Metal and Inherent Flame Retardant Hi-Vis winter jacket with taped seams and quilted lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
XXS-4XL 93 orange/navy 822, 932, 054, 055, 893
20
951 WINDTECH FR HVO ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm², PPE 2
895 CANTEX JERSEY AT ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm², PPE 1
2
EN 343 3.1 ***EN 342 (5208+5201) RIS-3279-TOM
SHIELD
14
ATPV (cal/cm²)
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
5208 82 FLAME RETARDANT WINTER JACKET, HOOD
Adjustable hood with wind and waterproof jersey lining. Can be attached to articles 5205 82 and 5206 82. Size: Colour: Quality:
XXS-4XL 93 orange/navy 822, 932, 054, 055, 893
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1
*EN ISO 20471 CL.2 CL.1 (XS-L)
EN 13034 type PB[6]
EN 13034 type PB[6] EN ISO 20471 CL.3 CL.2* (XS-S) TRANEMO SKINSAFE
846 Ara TX ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm², PPE 1
9151 82 FLAME RETARDANT HOOD
Non-Metal and Inherent Flame Retardant Hi-Vis winter jacket with removable hood, taped seams and quilted lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
5234 84 93
SHIELD
ELIM (cal/cm²)
6315 90 07
40
5233 95 93
35
ATPV (cal/cm²)
ZENITH SYSTEM 6372 89 94
ELIM (cal/cm²)
TRANEMO SKINSAFE™ SKIN PROTECTION
WINTER SYSTEM
SKIN PROTECTION
88
One size 50 orange 822, 054
EN ISO 20471 CL.3
5233 95 FLAME RETARDANT SOFTSHELL JACKET
5263 95 FLAME RETARDANT SOFTSHELL WAISTCOAT
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis softshell jacket with very high comfort. The jacket is ergonomically shaped for working with raised arms. Size: Colour: Quality:
Non-Metal, wind and water resistant Inherent Flame Retardant softshell waistcoat. Size: Colour: Quality:
XS-4XL 93 orange/navy 951, 950, 804
RIS-3279-TOM TRANEMO SKINSAFE
XS-4XL 93 orange/navy 951, 950, 804
5234 84 FLAME RETARDANT JACKET
Non-Metal and Inherent Flame Retardant Hi-Vis jacket in a comfortable and tear resistant fabric with good colourfastness. The jacket is suitable for work within high voltage environments and where High Visibility is also required. Size: Colour: Quality:
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2
EN ISO 20471 CL.2
EN 13034 type PB[6]
RIS-3279-TOM
RIS-3279-TOM
EN ISO 20471 CL.3
TRANEMO SKINSAFE
TRANEMO SKINSAFE
RIS-3279-TOM
XS-4XL 93 orange/navy 846, 811
TRANEMO SKINSAFE
5240 84 FLAME RETARDANT BIB ’N’ BRACE
Non-Metal and Inherent Flame Retardant Hi-Vis bib ’n’ brace with front zip in a comfortable and tear resistant fabric with good colourfastness. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 93 orange/navy 846, 811, 804
* For complete information regarding product certifications, visit tranemo.co.uk
5249 84 FLAME RETARDANT BIB ’N’ BRACE
Non-Metal and Inherent Flame Retardant Hi-Vis bib ’n’ brace with front zip and nail pockets in a comfortable and tear resistant fabric with good colourfastness. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 93 orange/navy 846, 811, 804
5211 84 FLAME RETARDANT BOILERSUIT
Non-Metal and Inherent Flame Retardant Hi-Vis boilersuit in a comfortable and tear resistant fabric with good colourfastness. The High Visibility boilersuit is well suited for work in electrical installations where there is a risk of Electric Arc. Size: Colour: Quality:
XS-4XL, M-3XL Tall 93 orange/navy 846, 811, 804
ZENITH
The products on this section are certified according to:
NEW
NEW
9095 82 FLAME RETARDANT TOOL POCKETS
Loose Nail pockets to be placed on belt 9093 00 and fits well on for example rail cutting trousers 5284 82. Size: Colour: Quality:
One size 50 orange 821, 885, 802
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 9,2 cal/cm² ATPV: 11,0 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.1 A1
EN ISO 20471 CL.1
EN ISO 20471 CL.2
EN 13034 type PB[6]
RIS-3279-TOM
TRANEMO SKINSAFE
5284 82 FLAME RETARDANT RAIL CUTTING TROUSERS
5221 84 FLAME RETARDANT HI-VIS TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Inherent Flame Retardant rail cutting trousers extra reinforced with Barricader fabric which provides a high protection against metal splashes.
Leather belt with covered metal buckle with no exposed metal which is a requirement for Electric Arc garments. Also helps protect against risk of scratching when working in sensitive environments.
89
NEW
EN ISO 11612 A1 B1 C1 F1
9093 00 LEATHER BELT
Size: Colour: Quality:
FLAME RETARDANT
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with covered pocket openings for work with chemicals.
30”- 50”R, 32”- 40”T, 34”- 48”S 81 orange/anthracite 821, 802, 811
30”- 50”R, 32”- 40”T, 30”- 48”S 93 orange/navy 811, 846
One size 07 black Leather
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 2 ELIM: 23,0 cal/cm² ATPV: 33,0 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2 CL.1 (30”S)
EN ISO 20471 CL.2 CL.1 (30”S)
EN ISO 20471 CL.2
*RIS-3279-TOM
*EN 342 (5201+5205 or 5208)
RIS-3279-TOM
TRANEMO SKINSAFE
**RIS-3279-TOM
TRANEMO SKINSAFE
5220 84 FLAME RETARDANT TROUSERS
5201 84 FLAME RETARDANT TROUSERS, WINDBREAKER
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis trousers in a comfortable and tear resistant fabric with good colourfastness. The High Visibility trousers are are well suited for work in electrical installations where there is a risk of Electric Arc.
5281 84 FLAME RETARDANT STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with a windproof jersey lining. The High Visibility trousers are are well suited for work in electrical installations where there is a risk of Electric Arc.
30”- 50”R, 32”- 40”T, 30”- 48”S 93 orange/navy 846, 811, 804
Non-Metal and Inherent Flame Retardant trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 93 orange/navy 846, 811, 804, 898
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 61482-2 APC 2 ELIM: 23,0 cal/cm² ATPV: 33,0 cal/cm²
EN 61482-2 APC 1 ELIM: 8,0 cal/cm² ATPV: 8,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2 CL.1 (30”S)
EN ISO 20471 CL.2 CL.1 (30”S)
EN ISO 20471 CL.2
*RIS-3279-TOM
*EN 342 (5201+5205 or 5208)
RIS-3279-TOM
TRANEMO SKINSAFE
**RIS-3279-TOM
TRANEMO SKINSAFE
5252 84 FLAME RETARDANT TROUSERS
5253 84 FLAME RETARDANT TROUSERS, WINDBREAKER
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets in a comfortable and tear resistant fabric with good colourfastness. 30”- 50”R, 32”- 40”T, 30”- 48”S 93 orange/navy 846, 811, 804
* For complete information regarding product certifications, visit tranemo.co.uk
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a windproof jersey lining. 30”- 50”R, 32”- 40”T, 30”- 48”S 93 orange/navy 846, 811, 898, 804
30”- 50”R, 32”- 40”T, 28”- 48”S 93 orange/navy 846, 811, 852, 804
NEW
5294 84 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS
Non-Metal and Inherent Flame Retardant trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 93 orange/navy 846, 811, 852, 804
FLAME RETARDANT
O
R
T
ST
RIC
T LEGISL
AT
IO
ZENITH LADIES EDGE
N
CO
O
C
’S
V
SE
EM
EM
EN
CH
T
AS
WE
PF
SU
TO
PP
90
RP
O R AT E PF
AS
M
EDGE EDGE is designed to make you highly visible on the railways, in areas where there are requirements for garments to offer protection for FR and Arc hazards. EDGE is non-metal, provides excellent performance for cutting / welding and is certified according to EN ISO 20471 / RIS3279-TOM (GO/RT). The pockets are bellow-free by design to ensure these do not cause a snagging risk when working around Railways, with machinery or around moving vehicles. The fabric passes EN13034 against liquid chemicals, and the design with closed pockets makes the garments EN 13034 certified. EDGE is also a good choice from a sustainability perspective as the entire collection is completely PFAS-free. Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk. 821: Edge HVO, 370 g/m², EN ISO 11612 D1 E3, LOI: 27,5%
c95nt
EDGE
FLAME RETARDANT
The products on this section are certified according to:
UPDATED EN ISO 11612 A1 B1 C1 F1 EN 61482-2 APC 2 ELIM: 9,2 cal/cm² ATPV: 11,0 cal/cm² EN 1149-5 EN ISO 11611 CL.2 A1 EN 13034 type PB[6] EN ISO 20471 CL.3
6131 82 FLAME RETARDANT JACKET
RIS-3279-TOM
PFAS-free, Non-Metal, Flame Retardant Hi-Vis jacket in double weave fabric with comfort finish on the inside, developed for the railway industry. Size: Colour: Quality:
XS-4XL 50 orange 821
UPDATED
EN ISO 11612 A1 B1 C1 F1 EN 61482-2 APC 2 ELIM: 9,2 cal/cm² ATPV: 11,0 cal/cm² EN 1149-5 EN ISO 11611 CL.2 A1 EN 13034 type PB[6] EN ISO 20471 CL.2 RIS-3279-TOM
6121 82 FLAME RETARDANT TROUSERS
PFAS-free, Non-Metal, Flame Retardant Hi-Vis trousers in double weave fabric with comfort finish on the inside, developed for the railway industry. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 50 orange 821
UPDATED EN ISO 11612 A1 B1 C1 F1 EN 61482-2 APC 2 ELIM: 9,2 cal/cm² ATPV: 11,0 cal/cm² EN 1149-5 EN ISO 11611 CL.2 A1 EN 13034 type PB[6] EN ISO 20471 CL.3 RIS-3279-TOM
6111 82 FLAME RETARDANT BOILERSUIT
PFAS-free, Non-Metal, Flame Retardant Hi-Vis boilersuit in double weave fabric with comfort finish on the inside, developed for the railway industry. Size: Colour: Quality:
S-5XL, M-4XL Tall 50 orange 821
91
FLAME RETARDANT
OUTERWEAR
OUTERWEAR Many jobs that require Flame Retardant or Electric Arc protection are often performed outdoors in different weather conditions, which can sometimes place great demands on the clothing. They must protect not only against the bad weather but also Flame related risks - whilst also being comfortable and flexible. Tranemo has many different types of outer garments enabling the user to wear clothing according to the layer-on-layer principle for the best and most lightweight protection. Each Flame Retardant range has suitable winter garments for when work is physically active and also for varying degree of climate.
40
APC
SHIELD
35
ATPV (cal/cm²)
5233 95 93
ELIM (cal/cm²)
6372 89 94
WINTER SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
951 WINDTECH FR HVO ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm², PPE 2
895 CANTEX JERSEY AT ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm², PPE 1
2
68
895 CANTEX JERSEY AT ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm², PPE 1
SHIELD 899 CANTEX TERRY ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm², PPE 2
5145 95 94
63
ATPV (cal/cm²)
5030 89 94
ELIM (cal/cm²)
6372 89 94
WINTER SYSTEM
INSULATION
TRANEMO SKINSAFE™ SKIN PROTECTION
92
950 WINDTECH FR 340 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm², PPE 3
OUTERWEAR
FLAME RETARDANT
HOW TO DRESS FOR COLD WEATHER FROM THE INSIDE OUT We recommend that you only wear Inherent Flame Retardant protective clothing on your body, from the inside out. This is to avoid the risk of burning cotton, melting polyester or metal transmitting electricity and heat to the skin. Also, do not forget to protect the whole body, from head to toe.
LAYER 1 - INNER LAYER The innermost layer ensures that you stay warm and dry from the inside. The inner layer is the garment you wear closest to the body, such as a base layer, underwear or socks. If the clothes do not remove moisture from the skin, the body will cool down. In the event of an accident, incorrect choice of underwear can lead to the fabric catching fire and melting into the skin. Therefore, it is important to prioritise the innermost protection. We recommend choosing Inherent Flame Retardant underwear in Merino Wool. Wool underwear is soft and comfortable, provides good insulation and has good moisture-transporting ability. Wool underwear is also antistatic and does not attract bad odours.
LAYER 2 - INSULATING MID-LAYER An insulating mid-layer should be used to increase comfort during the colder months of the year. This layer creates a barrier and distance between layers 1 and 3 and insulates against both heat and low temperatures. The optimal mid-layer transports the moisture away from the first layer and ensures that the heat does not leave your body. A wool based garment is perfect to use as a mid-layer.
LAYER 3 - PROTECTIVE OUTER LAYER The primary function of any outer layer is to provide protection - however, to be worn every day, these garments should also fit the body snugly and offer comfort, freedom of movement and meet practical needs such as storage. We recommend inherent Flame Retardant shell garments, these garments have taped seams and are wind and waterproof according to EN 343. Thanks to a very good breathability, these garments are user-friendly and comfortable.
AIR GAP The air gaps that form between the different layers have a low conductivity which increases the ability to block heat, insulate against the cold and provide extra safety in demanding work situations.
93
FLAME RETARDANT
94
OUTERWEAR
UPDATED
UPDATED
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C2 F1
EN ISO 11612 A1+A2 B1 C2 F1
EN 61482-2 APC 2 ELIM: 25,0 cal/cm² ATPV: 25,0 cal/cm²
EN 61482-2 APC 2 ELIM: 32,0 cal/cm² ATPV: 32,0 cal/cm²
EN 61482-2 APC 2 ELIM: 32,0 cal/cm² ATPV: 32,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
**EN ISO 11611 CL.1 A1
EN ISO 11611 CL.1 A1+A2
*EN ISO 11611 CL.1 A1+A2
**EN 13034 type PB[6]
EN 13034 type PB[6]
*EN 13034 type PB[6]
EN ISO 20471 CL.3
EN ISO 20471 CL.3 CL.2* (XXS-XS)
5101 93 FLAME RETARDANT WINTER JACKET
EN 343 4.1
PFAS-free, Non-Metal and Inherent Flame Retardant Hi-Vis winter jacket with taped seams and quilt lining. Wind and waterproof according to EN 343. Outer fabric with 20% recycled fibres.
**EN 342 (5101+5122)
Size: Colour: Quality:
EN ISO 20471 CL.3 CL.2*** (XXS-XS)
5109 93 FLAME RETARDANT WINTER JACKET, HOOD
EN 343 4.1
PFAS-free, Non-Metal and Inherent Flame Retardant Hi-Vis winter jacket with removable hood, taped seams and quilted lining. Wind and waterproof according to EN 343. Outer fabric with 20% recycled fibres.
**EN 342 (5109+5122)
XXS-4XL 94 yellow/navy 932, 055, 054
Size: Colour: Quality:
EN 343 3.1 *EN 342 (5118+5122)
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 25,0 cal/cm² ATPV: 25,0 cal/cm²
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
**EN ISO 11611 CL.1 A1
**EN ISO 11611 CL.1 A1
**EN ISO 11611 CL.1 A1
**EN 13034 type PB[6]
**EN 13034 type PB[6]
**EN 13034 type PB[6]
EN ISO 20471 CL.3
EN ISO 20471 CL.3 CL.2* (XS-S)
EN ISO 20471 CL.3 CL.2* (XS-S)
5119 94 FLAME RETARDANT PARKA + LINING 9128
Non-Metal, Inherent Flame Retardant quilted parka with taped seams. Comes with sleeveless fibrefur lining 9128 06. Wind and water resistant fabric according to EN 343.
*EN 342 (5119+5122)
Size: Colour: Quality:
5135 94 FLAME RETARDANT SHELL JACKET
EN 343 3.3
Non-Metal and Inherent Flame Retardant shell jacket with taped seams and mesh lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
XS-4XL 94 yellow/navy 943, 804, 054, 060
EN 343 3.3
XS-4XL 94 yellow/navy 943, 804, 805, 911
EN ISO 11612 A1 B2 C2 F2
EN ISO 11612 A1+A2 B1 C1 E3 F1
IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 40,0 cal/cm² EBT: 44,0 cal/cm²
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 34,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1
EN 13034 type PB[6]
EN ISO 11611 CL.2 A1+A2
EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (XS-S)
EN 13034 type PB[6]
5145 95 FLAME RETARDANT SOFTSHELL JACKET
5195 95 FLAME RETARDANT SOFTSHELL JACKET
Non-Metal, wind and water resistant Inherent TRANEMO SKINSAFE Flame Retardant Hi-Vis softshell jacket with very high comfort. Size: Colour: Quality:
*EN 342 (5701+5122)
Non-Metal and Inherent Flame Retardant softshell jacket that reaches PPE category 4 (higher than 40 cal/cm²).
XS-4XL 94 yellow/navy 950, 804
Size: Colour: Quality:
NEW
Non-Metal, Inherent Flame Retardant shell jacket with taped seams and mesh lining. Comes with sleeveless fibrefur lining 9128 06. Wind and waterproof according to EN 343. XS-4XL 94 yellow/navy 943, 804, 805, 911, 060
5701 88 FLAME RETARDANT WINTER JACKET
PFAS-free and Inherent Flame Retardant Winter jacket with increased visibility, sleeves and front in Cantex Weld and back in Cantex Stretch. The jacket has a quilted lining and fleece in collar.
XS-4XL 94 yellow/navy 955
Size: Colour: Quality:
XXS-4XL 94 yellow/navy 885, 884, 055, 054, 893
NEW
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
***EN 13034 type PB[6]
EN ISO 11611 CL.2 A1
EN ISO 20471 CL.3 CL.2* (XS-S)
EN ISO 20471 CL.3 CL.2* (XS-S)
EN 13034 type PB[6]
**EN 342 (5801/5808+5822)
XS-4XL 94 yellow/navy 943, 804, 054
5136 94 FLAME RETARDANT SHELL JACKET + LINING 9128
Size: Colour: Quality:
EN ISO 11612 A1 B1 C1 F1
EN ISO 20471 CL.3 CL.2* (XS-S)
Non-Metal and Inherent Flame Retardant quilted parka with taped seams. Wind and water resistant fabric according to EN 343. Size: Colour: Quality:
XXS-4XL 94 yellow/navy 932, 055, 054
EN ISO 11612 A1 B1 C1 F1
EN 343 3.1
5118 94 FLAME RETARDANT PARKA
5801 81 FLAME RETARDANT WINTER JACKET
**EN 342 (5801/5808+5822)
5808 81 FLAME RETARDANT WINTER JACKET, HOOD
Non-Metal and Inherent Flame Retardant Hi-Vis Winter Jacket with fiberfur lining in body and quilted lining in sleeves. The jacket is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs.
Non-Metal and Inherent Flame Retardant Hi-Vis Winter Jacket with removable hood, fiberfur lining in body and quilted lining in sleeves. The jacket is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs.
Size: Colour: Quality:
Size: Colour: Quality:
XXS-4XL 94 yellow/navy 811, 060, 054, 911
* For complete information regarding product certifications, visit tranemo.co.uk
XXS-4XL 94 yellow/navy 811, 060, 054, 911
TRANEMO SKINSAFE
6032 95 FLAME RETARDANT SOFTSHELL JACKET
Non-Metal, wind and water resistant Inherent Flame Retardant softshell jacket with increased visibility and very high comfort. Size: Colour: Quality:
XS-4XL 94 yellow/navy 950
OUTERWEAR
FLAME RETARDANT
95
The products on this section are certified according to:
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 30,0 cal/cm²
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 30,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.1 A1
**EN ISO 11611 CL.1 A1
EN 13034 type PB[6]
**EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (XS)
5205 82 FLAME RETARDANT WINTER JACKET
Non-Metal and Inherent Flame Retardant Hi-Vis winter jacket with taped seams and quilt lining. Wind and waterproof according to EN 343.
EN 343 3.1 **EN 342 (5205+5201) RIS-3279-TOM
Size: Colour: Quality:
XXS-4XL 93 orange/navy 822, 932, 054, 055, 893
EN ISO 20471 CL.3 CL.2* (XS) EN 343 3.1 ***EN 342 (5208+5201) RIS-3279-TOM
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.2 A1
*EN ISO 20471 CL.2 CL.1 (XS-L)
5208 82 FLAME RETARDANT WINTER JACKET, HOOD
Non-Metal and Inherent Flame Retardant Hi-Vis winter jacket with removable hood, taped seams and quilt lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
XXS-4XL 93 orange/navy 822, 932, 054, 055, 893
EN 13034 type PB[6] EN ISO 20471 CL.3 CL.2* (XS-S)
5233 95 FLAME RETARDANT SOFTSHELL JACKET
TRANEMO SKINSAFE
5263 95 FLAME RETARDANT SOFTSHELL WAISTCOAT
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis softshell jacket with very high comfort. The jacket is ergonomically shaped for working with raised arms. Size: Colour: Quality:
Non-Metal, wind and water resistant Inherent Flame Retardant softshell waistcoat. Size: Colour: Quality:
XS-4XL 93 orange/navy 951, 950, 804
XS-4XL 93 orange/navy 951, 950, 804
NEW *EN ISO 11612 A1 B1 C1 F1
*EN ISO 11612 A1+A2 B1 C1 F1
*EN ISO 11612 A1 B1 C1 F1
*IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
*EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
*IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
**EN ISO 20471 CL.2 CL.1 (XS-L)
**EN ISO 20471 CL.2 CL.1 (XS-L)
5165 95 FLAME RETARDANT SOFTSHELL WAISTCOAT
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis softshell waistcoat. Size: Colour: Quality:
XS-4XL 94 yellow/navy 950, 804
9065 81 FLAME RETARDANT HOOD
Adjustable hood with wind and waterproof jersey lining. Can be attached to articles 5801/5802/5868, 5800/5803/5869 and 5832 81. Size: Colour: Quality:
One size 55 yellow 811, 898
* For complete information regarding product certifications, visit tranemo.co.uk
5868 81 FLAME RETARDANT BODYWARMER
Non-Metal and Inherent Flame Retardant Hi-Vis Winter Bodywarmer with fiberfur lining. The waistcoat is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs. Size: Colour: Quality:
XS-4XL 94 yellow/navy 811, 060, 054, 911
9151 93 FLAME RETARDANT HOOD
PFAS-free, Non-Metal and Inherent Flame Retardant adjustable hood with taped seams and quilted lining. Can be attached to articles 5101 93 and 5103 93. Outer fabric with 20% recycled fibres. Size: Colour: Quality:
One size 55 yellow 932, 054
6062 95 FLAME RETARDANT SOFTSHELL WAISTCOAT
Non-Metal, wind and water resistant Inherent Flame Retardant softshell waistcoat with increased visibility. Size: Colour: Quality:
XS-4XL 94 yellow/navy 950
9151 82 FLAME RETARDANT HOOD
Adjustable hood with wind and waterproof jersey lining. Can be attached to articles 5205 82 and 5206 82. Size: Colour: Quality:
One size 50 orange 822, 054
FLAME RETARDANT
96
OUTERWEAR
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 2 ELIM: 23,0 cal/cm² ATPV: 33,0 cal/cm²
EN 61482-2 APC 2 ELIM: 23,0 cal/cm² ATPV: 33,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2 CL.1 (30”S)
EN ISO 20471 CL.2 CL.1 (30”S)
EN 13034 type PB[6]
*EN 342 (5201+5205 or 5208)
*EN 342 (5253+5205 or 5208)
EN ISO 20471 CL.2
**RIS-3279-TOM
**RIS-3279-TOM
*EN 342 (5822+5801 or 5808)
5201 84 FLAME RETARDANT TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with a windproof jersey lining. The High Visibility trousers are are well suited for work in electrical installations where there is a risk of Electric Arc. Size: Colour: Quality:
5253 84 FLAME RETARDANT TROUSERS, WINDBREAKER
5822 81 FLAME RETARDANT TROUSERS, WINDBREAKER
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a windproof jersey lining.
30”- 50”R, 32”- 40”T, 30”- 48”S 93 orange/navy 846, 811, 804, 898
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with a wide fit and a windproof jersey lining.
30”- 50”R, 32”- 40”T, 30”- 48”S 93 orange/navy 846, 811, 898, 804
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2
EN 13034 type PB[6]
EN ISO 20471 CL.1
*EN 342 (5852+5801 or 5808)
EN ISO 20471 CL.1
*EN 342 (5853+5801 or 5808)
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804, 898
*EN 342 (5823+5801 or 5808)
5852 81 FLAME RETARDANT CRAFTSMAN TROUSERS, WINDBREAKER
5823 81 FLAME RETARDANT TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with windproof jersey lining.
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets with a wide fit and a windproof jersey lining. Size: Colour: Quality:
5853 81 FLAME RETARDANT CRAFTSMAN TROUSERS, WINDBREAKER
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804, 898
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a windproof jersey lining.
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 898
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C2 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B2 C2 F2
EN 61482-2 APC 2 ELIM: 32,0 cal/cm² ATPV: 32,0 cal/cm²
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 40,0 cal/cm² EBT: 44,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.1 A1+A2
EN ISO 11611 CL.1 A1
EN 13034 type PB[6]
EN 13034 type PB[6]
EN 13034 type PB[6]
EN ISO 20471 CL.1
EN ISO 20471 CL.2 CL.1 (XS-S)
EN ISO 20471 CL.2 CL.1 (XS-S)
EN 343 4.1
EN 343 3.3
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy 811, 804, 898
*EN 342
5122 93 FLAME RETARDANT WINTER TROUSERS
PFAS-free, Non-Metal and Inherent Flame Retardant Hi-Vis winter trousers with taped seams and quilt lining. Wind and waterproof according to EN 343. Outer fabric with 20% recycled fibres. Size: Colour: Quality:
XS-4XL 94 yellow/navy 932, 054, 893
* For complete information regarding product certifications, visit tranemo.co.uk
5132 94 FLAME RETARDANT SHELL TROUSERS
5194 95 FLAME RETARDANT SOFTSHELL TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant shell trousers with taped seams and mesh lining. Wind and waterproof according to EN 343. XS-4XL 94 yellow/navy 943, 804, 805, 911
Non-Metal and Inherent Flame Retardant softshell trousers that reach PPE category 4 (higher than 40 cal/cm²). XS-4XL 94 yellow/navy 955
OUTERWEAR
FLAME RETARDANT
The products on this section are certified according to:
EN ISO 11612 A1 B1 C1 F1 EN 61482-2 APC 2 ELIM: 25,0 cal/cm² ATPV: 25,0 cal/cm² EN 1149-5 *EN ISO 11611 CL.1 A1 *EN 13034 type PB[6] EN ISO 20471 CL.3 EN 343 3.1 **EN 342
5111 94 FLAME RETARDANT WINTER BOILERSUIT
Non-Metal and Inherent Flame Retardant winter boilersuit with taped seams and quilted lining. Wind and waterproof according to EN 343. The boilersuit is ergonomically shaped for work with raised arms. Concealed 2-way front zip with stormflap. Detachable and adjustable hood. Fleece in collar. Two loops for communication equipment. Chest pockets with zip. D-ring. Sleeves with HTFR-Dobby reinforcement at the bottom, adjustable sleeve width and inside knitted cuffs. Two-way zip in legs. Side pockets with flap. Leg pocket with flap. HTFR-Dobby reinforced knees with inside kneepad pockets. Snow barrier in legs and adjustable ankle width with HTFR-Dobby reinforced back hem. Heat sealed reflective stripes for greater comfort. Fibrefur lining 9128 can be attached. *Hood must be used or removed during welding or work with chemicals. **The garment is tested in a 3 layer system together with basic underwear. Tranemo recommends underwear 5940+5980 and 5930+5990. Size: Colour: Quality:
XS-4XL 94 yellow/navy 943, 804, 054, 893
97
FLAME RETARDANT
98
OUTERWEAR LADIES NEW
The products on this section are certified according to:
NEW
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 61482-2 APC 2 ELIM: 15,0 cal/cm² ATPV: 18,0 cal/cm²
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
***EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (S-L)
EN ISO 20471 CL.3 CL.2* (S-L)
**EN 342 (5802/5806+5862)
5802 81 FLAME RETARDANT LADIES WINTER JACKET
**EN 342 (5802/5806+5862)
Non-Metal and Inherent Flame Retardant Ladies Hi-Vis Winter Jacket with fiberfur lining in body and quilted lining in sleeves. The jacket is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 811, 060, 054, 911
UPDATED
5806 81 FLAME RETARDANT LADIES WINTER JACKET, HOOD Non-Metal and Inherent Flame Retardant Ladies Hi-Vis Winter Jacket with removable hood, fiberfur lining in body and quilted lining in sleeves. The jacket is made of soft and flexible TERA TX with high tear resistance and good protection against electric arcs. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 811, 060, 054, 911
UPDATED
EN ISO 11612 A1+A2 B1 C2 F1
EN ISO 11612 A1+A2 B1 C2 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 32,0 cal/cm² ATPV: 32,0 cal/cm²
EN 61482-2 APC 2 ELIM: 32,0 cal/cm² ATPV: 32,0 cal/cm²
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.1 A1+A2
*EN ISO 11611 CL.1 A1+A2
**EN ISO 11611 CL.1 A1
EN 13034 type PB[6]
*EN 13034 type PB[6]
**EN 13034 type PB[6]
EN ISO 20471 CL.3 CL.2* (S-M) EN 343 4.1 **EN 342 (5103+5127)
5103 93 FLAME RETARDANT LADIES WINTER JACKET
PFAS-free, Non-Metal and Inherent Flame Retardant ladies Hi-Vis winter jacket with taped seams and quilted lining. Wind and waterproof according to EN 343. Outer fabric with 20% recycled fibres. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 932, 055, 054
EN ISO 20471 CL.3 CL.2*** (S-M) EN 343 4.1 **EN 342 (5107+5127)
5107 93 FLAME RETARDANT LADIES WINTER JACKET, HOOD PFAS-free, Non-Metal and Inherent Flame Retardant ladies Hi-Vis winter jacket with removable hood, taped seams and quilted lining. Wind and waterproof according to EN 343. Outer fabric with 20% recycled fibres. Size: Colour: Quality:
EN ISO 20471 CL.3 CL.2* (S-XL) EN 343 3.3
Ladies S-XXL 94 yellow/navy 932, 055, 054
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 34,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
**EN ISO 11611 CL.1 A1
EN ISO 11611 CL.2 A1
EN ISO 11611 CL.2 A1+A2
**EN 13034 type PB[6]
EN 13034 type PB[6]
EN 13034 type PB[6]
EN 343 3.3
5138 94 FLAME RETARDANT LADIES SHELL JACKET + LINING 9129
EN ISO 20471 CL.3 CL.2* (S-M) TRANEMO SKINSAFE
Non-Metal and Inherent Flame Retardant ladies shell jacket with taped seams and mesh lining. Comes with sleeveless fibrefur lining 9129 06. Wind and waterproof according to EN 343. Size: Colour: Quality:
5149 95 FLAME RETARDANT LADIES SOFTSHELL JACKET
Ladies S-XXL 94 yellow/navy 943, 804, 805, 911
*EN 342 (5703+5122)
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis ladies softshell jacket with very high comfort. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 950, 804
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 30,0 cal/cm²
EN 61482-2 APC 2 ELIM: 30,0 cal/cm² ATPV: 30,0 cal/cm²
EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 11611 CL.1 A1
**EN ISO 11611 CL.1 A1
EN ISO 11611 CL.2 A1
EN 13034 type PB[6]
**EN 13034 type PB[6]
EN 13034 type PB[6]
EN 343 3.1 **EN 342 (5206+5202) RIS-3279-TOM
Non-Metal and Inherent Flame Retardant ladies HiVis winter jacket with taped seams and quilt lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy 822, 932, 054, 055, 893
EN ISO 20471 CL.3 CL.2* (S-M) EN 343 3.1 ***EN 342 (5209+5202) RIS-3279-TOM
* For complete information regarding product certifications, visit tranemo.co.uk
5209 82 FLAME RETARDANT LADIES WINTER JACKET, HOOD Non-Metal and Inherent Flame Retardant ladies Hi-Vis winter jacket with removable hood, taped seams and quilt lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy 822, 932, 054, 055, 893
5703 88 FLAME RETARDANT LADIES WINTER JACKET
Size: Colour: Quality:
EN ISO 11612 A1 B1 C1 F1
5206 82 FLAME RETARDANT LADIES WINTER JACKET
Ladies S-XXL 94 yellow/navy 943, 804, 805, 911
PFAS-free and Inherent Flame Retardant ladies Winter jacket with increased visibility, sleeves and front in Cantex Weld and back in Cantex Stretch. The jacket has a quilted lining and fleece in collar.
EN ISO 11612 A1 B1 C1 F1
EN ISO 20471 CL.3 CL.2* (S-M)
Non-Metal and Inherent Flame Retardant ladies shell jacket with taped seams and mesh lining. Wind and waterproof according to EN 343. Size: Colour: Quality:
EN ISO 11612 A1 B1 C1 F1
EN ISO 20471 CL.3 CL.2* (S-XL)
5137 94 FLAME RETARDANT LADIES SHELL JACKET
EN ISO 20471 CL.3 CL.2* (S-M) TRANEMO SKINSAFE
Ladies S-XXL 94 yellow/navy 885, 884, 055, 054, 893
5219 95 FLAME RETARDANT LADIES SOFTSHELL JACKET
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis ladies softshell jacket with very high comfort. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy 951, 950, 804
OUTERWEAR LADIES
*EN ISO 11612 A1 B1 C1 F1
NEW
*IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm²
FLAME RETARDANT
NEW
EN 1149-5
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
**EN ISO 20471 CL.2 CL.1 (S-L)
IEC 61482-2 APC 2 ELIM: 26,0 cal/cm² ATPV: 28,0 cal/cm²
EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN ISO 11611 CL.1 A1+A2
EN ISO 11611 CL.1 A1
Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis ladies softshell waistcoat.
EN 13034 type PB[6]
EN 13034 type PB[6]
Size: Colour: Quality:
EN ISO 20471 CL.2 CL.1 (S-M)
EN ISO 20471 CL.2 CL.1 (S-M)
EN 343 4.1
EN 343 3.3
5169 95 FLAME RETARDANT LADIES SOFTSHELL WAISTCOAT Ladies S-XXL 94 yellow/navy 950, 804
99
*EN 342
EN ISO 11612 A1 B1 C1 F1 EN 61482-2 APC 2 ELIM: 12,0 cal/cm² ATPV: 19,0 cal/cm² EN 1149-5
5127 93 FLAME RETARDANT LADIES WINTER TROUSERS
5139 94 FLAME RETARDANT LADIES SHELL TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Ladies Hi-Vis Winter trousers with taped seams and quilt lining. Wind and waterproof according to EN 343.
*EN ISO 20471 CL.2 CL.1 (S-L)
5267 95 FLAME RETARDANT LADIES SOFTSHELL WAISTCOAT
Non-Metal and Inherent Flame Retardant ladies shell trousers with taped seams and mesh lining. Wind and waterproof according to EN 343.
Ladies S-XXL 94 yellow/navy 931, 054, 893
Ladies S-XXL 94 yellow/navy 943, 804, 805, 911
Non-Metal, wind and water resistant Inherent Flame Retardant ladies softshell waistcoat. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy 951, 950, 804
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 2 ELIM: 23,0 cal/cm² ATPV: 33,0 cal/cm²
EN 61482-2 APC 2 ELIM: 23,0 cal/cm² ATPV: 33,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.2 CL.1 (8)
EN ISO 20471 CL.2 CL.1 (8)
EN 13034 type PB[6]
*EN 342 (5202+5206 or 5209)
*EN 342 (5258+5206 or 5209)
EN ISO 20471 CL.2
**RIS-3279-TOM
**RIS-3279-TOM
*EN 342 (5862+5802 or 5806)
5202 84 FLAME RETARDANT LADIES TROUSERS, WINDBREAKER Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with a windproof jersey lining. The High Visibility trousers are are well suited for work in electrical installations where there is a risk of Electric Arc. Size: Colour: Quality:
5258 84 FLAME RETARDANT LADIES TROUSERS, WINDBREAKER
5862 81 FLAME RETARDANT LADIES TROUSERS, WINDBREAKER
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets and a windproof jersey lining.
Ladies 8-20 93 orange/navy 846, 811, 804, 898
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with a wide fit and a windproof jersey lining.
Ladies 8-20 93 orange/navy 846, 811, 898, 804
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
IEC 61482-2 APC 2 ELIM: 19,0 cal/cm² ATPV: 21,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN ISO 20471 CL.1
EN ISO 20471 CL.2
EN ISO 20471 CL.1
*EN 342 (5866+5802 or 5806)
*EN 342 (5867+5802 or 5806)
Ladies 8-20 94 yellow/navy 811, 804, 898
*EN 342 (5863+5802 or 5806)
5863 81 FLAME RETARDANT LADIES TROUSERS, WINDBREAKER
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with windproof jersey lining. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy 811, 898
* For complete information regarding product certifications, visit tranemo.co.uk
5866 81 FLAME RETARDANT LADIES TROUSERS, WINDBREAKER
5867 81 FLAME RETARDANT LADIES CRAFTSMAN TROUSERS, WINDBREAKER
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets and a windproof jersey lining. Ladies 8-20 94 yellow/navy 811, 804, 898
Non-Metal and Inherent Flame Retardant Hi-Vis ladies trousers with nail pockets with a wide fit and a windproof jersey lining. Ladies 8-20 94 yellow/navy 811, 804, 898
100
FLAME RETARDANT
BASE LAYER MERINO WOOL
BASE LAYER Get comfortable and safe protection with our Inherent and Flame Retardant base layers for men and ladies. A Flame Retardant base layer is a good first protective layer closest to the skin and a very important part of Tranemo Skinsafe™. Choose from two different qualities, Merino wool/viscose and modacrylic/cotton, depending on your risk and level of activity. For work with higher intensity, we recommend a Flame Retardant base layer in merino wool, Merino RX and Merino FX. Merino Wool underwear is naturally Flame Retardant, dirt repellent and effectively absorbs moisture to keep the body warm. In addition, the extra-fine merino wool provides high comfort and does not attract bad odour. The Flame Retardant base layer with the unique blend of modacrylic and cotton is comfortable against the skin and provides you with long-lasting protection, wash after wash. Material with recycled cotton makes the garment a good environmentally friendly alternative. and Inherent Flame Retardant underwear in rib Merino RX Lightweight knitted wool mix.
901: Merino RX, 200 g/m², LOI: 27,7%
d95nt
NEW EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 14116 index 3
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm²
EN 1149-5
IEC 61482-2 APC 1 ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm²
EN 1149-5
EN 1149-5
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6300 90 FLAME RETARDANT T-SHIRT
6314 90 FLAME RETARDANT LADIES LONG SLEEVES T-SHIRT
Non-Metal and Inherent Flame Retardant ladies long sleeved T-shirt underwear in Merino wool/FR viscose tricot. Jacquard patterned panels. PFAS-free. Size: Colour: Quality:
6315 90 FLAME RETARDANT T-SHIRT LONG SLEEVES
Non-Metal and Inherent Flame Retardant T-shirt underwear in Merino wool/FR viscose tricot. PFAS-free. Size: Colour: Quality:
Ladies S-XXL 82 black/grey 901, 904
Non-Metal and Inherent Flame Retardant long sleeved T-shirt underwear in Merino wool/FR viscose tricot. PFAS-free.
XS-4XL 07 black 901
Size: Colour: Quality:
XS-4XL 07 black 901
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm²
EN ISO 11612 A1+A2 B1 C1 F1
IEC 61482-2 APC 1 ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm²
IEC 61482-2 APC 1 ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
TRANEMO SKINSAFE
TRANEMO SKINSAFE TRANEMO SKINSAFE
6311 90 FLAME RETARDANT LADIES LONG JOHNS
6319 90 FLAME RETARDANT TURTLENECK
6312 90 FLAME RETARDANT LONG JOHNS
Size: Colour: Quality:
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant ladies long Johns in Merino wool/FR viscose tricot. Jacquard patterned panels. PFAS-free. Ladies S-XXL 82 black/grey 901, 904
Non-Metal and Inherent Flame Retardant turtleneck underwear in Merino wool/FR viscose tricot. PFAS-free. XS-4XL 07 black 901
Non-Metal and Inherent Flame Retardant long Johns in Merino wool/FR viscose tricot. PFASfree. XS-4XL 07 black 901
BASE LAYER MERINO WOOL
FLAME RETARDANT
The products on this section are certified according to:
Merino FX
Soft and warm Inherent Flame Retardant underwear in wool terry. The airiness of the terry makes the garments light and extra warm.
NEW
905: Merino FX, 220 g/m²
d95nt
NEW
NEW
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1
EN 61482-2 APC 1
EN 61482-2 APC 1
EN 1149-5
EN 1149-5
EN 1149-5
6304 90 FLAME RETARDANT LONG SLEEVES UNDERWEAR T-SHIRT
6303 90 FLAME RETARDANT UNDERWEAR BALACLAVA / HOOD T-SHIRT
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant long sleeves underwear T-shirt in a soft and warm Merino wool terry. PFAS-free. XS-4XL 07 black 905
Non-Metal and Inherent Flame Retardant Long Sleeves T-Shirt with balaclava/hood in a soft and warm Merino wool terry. PFAS-free. XS-4XL 07 black 905
6301 90 FLAME RETARDANT LONG JOHNS
Non-Metal and Inherent Flame Retardant long Johns in a soft and warm Merino wool terry. PFAS-free. Size: Colour: Quality:
XS-4XL 07 black 905
101
FLAME RETARDANT
BASE LAYER MODACRYLIC/COTTON
Cantex JX c95mt
920: Cantex JX, 235 g/m², LOI: 30,1%
The products on this section are certified according to:
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
IEC 61482-2 CL.1 ARC RATING: 7,0 cal/cm²
IEC 61482-2 CL.1 ARC RATING: 7,0 cal/cm²
EN 1149-5
EN 1149-5
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5920 92 FLAME RETARDANT SHORT ZIP TURTLENECK
5940 92 FLAME RETARDANT LONG SLEEVES T-SHIRT Non-Metal and Inherent Flame Retardant t-shirt underwear with long sleeves in a soft tricot with 50% recycled cotton. PFAS-free.
Non-Metal and Inherent Flame Retardant turtleneck underwear in a soft tricot with 50% recycled cotton. PFAS-free. Size: Colour: Quality:
Size: Colour: Quality:
XS-3XL 03 navy 920
EN ISO 14116 index 3
EN ISO 11612 A1 B1 C1 F1
EN 1149-5
IEC 61482-2 CL.1 ARC RATING: 7,0 cal/cm²
XS-3XL, 5XL, 7XL 03 navy 920
EN 1149-5 TRANEMO SKINSAFE
5900 92 FLAME RETARDANT T-SHIRT
5930 92 FLAME RETARDANT LONG JOHNS
Non-Metal and Inherent Flame Retardant T-shirt underwear in a soft tricot with 50% recycled cotton. PFAS-free.
Non-Metal and Inherent Flame Retardant long Johns in a soft tricot with 50% recycled cotton. PFAS-free.
Size: Colour: Quality:
Size: Colour: Quality:
37
Cantex Fleece
920 CANTEX JX ARC RATING: 7,0 cal/cm² PPE 1
19
884/885 CANTEX WS ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm², PPE 2
APC
SHIELD
17
ATPV (cal/cm²)
920 CANTEX JX ARC RATING: 7,0 cal/cm² PPE 1
2
XS-3XL, 5XL, 7XL 03 navy 920
5834 81 94
ATPV (cal/cm²)
SHIELD
32
ELIM (cal/cm²)
5035 88 94
ELIM (cal/cm²)
5940 92 03
TERA TX SYSTEM SHIELD
TRANEMO SKINSAFE™
CANTEX SYSTEM
SKIN PROTECTION
XXS-3XL, 5XL, 7XL 03 navy 920
TRANEMO SKINSAFE™ 5940 92 03
102
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
893: Cantex Fleece, 330 g/m², EN 61482-1-2 CL.1, EN 1149-3
c95mt
EN ISO 11612 A1+A2 B1 C2 F2
5980 89 FLAME RETARDANT FLEECE JACKET
Non-Metal and Inherent Flame Retardant fleece jacket with zip closing. PFAS-free. Size: Colour: Quality:
XS-3XL 03 navy 893
EN ISO 11612 A1+A2 B1 C2 F2
5990 89 FLAME RETARDANT FLEECE LONG JOHNS
Non-Metal and Inherent Flame Retardant fleece long Johns. PFAS-free. Size: Colour: Quality:
XS-3XL 03 navy 893
UNDERWEAR
FLAME RETARDANT
EN ISO 14116 index 3
EN ISO 14116 index 3
EN 1149-5
EN 1149-5
103
UNDERWEAR In the event of a flame-related accident, incorrect choice of underwear can lead to the fabric catching fire and melting onto the skin. Therefore, always prioritise the protective layer you use closest to the body. Our Inherent and Flame Retardant underwear for men and ladies is created with safety and comfort in mind. The unique blend of modacrylic and cotton provides a long-term and comfortable protection that lasts wash after wash. The cotton in the underwear is made from recycled fibres, which reduces the garments environmental impact. The range also includes Flame Retardant boxer shorts in Merino Wool. This gives you a natural antibacterial and functional underwear with high breathability and comfort.
6310 90 FLAME RETARDANT BOXER SHORTS
5910 92 FLAME RETARDANT BOXER SHORTS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant boxer shorts in soft Merino wool and FR viscose. PFAS-free. XS-4XL 07 black 901
Non-Metal and Inherent Flame Retardant boxer shorts in a soft tricot with 50% recycled cotton. PFAS-free.
EN ISO 14116 index 3
EN ISO 14116 index 3
EN 1149-5
EN 1149-5
XS-3XL, 5XL, 7XL 03 navy 920
5911 92 FLAME RETARDANT BOXER SHORTS
5912 92 FLAME RETARDANT LONG BOXER SHORTS
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant boxer shorts. The boxer shorts are made of a soft tricot with 50% recycled cotton. PFAS-free. XS-4XL 03 navy 924
Non-Metal and Inherent Flame Retardant boxer shorts with longer legs. The boxer shorts are made of a soft tricot with 50% recycled cotton. PFAS-free.
NEW
XS-4XL 03 navy 924
NEW
EN ISO 14116 index 3
EN ISO 14116 index 3
EN ISO 14116 index 3
EN ISO 14116 index 3
EN 1149-5
EN 1149-5
EN 1149-5
EN 1149-5
5916 92 FLAME RETARDANT BRA
5914 92 FLAME RETARDANT SPORTS BRA
5997 92 FLAME RETARDANT SPORTS BRA FOR PROSTHESIS
Size:
Size:
5917 89 FLAME RETARDANT TANK TOP WITH SPORT BRA
Soft, Non-Metal and Inherent Flame Retardant tank top with a simple sports bra sewn-in. 50% recycled cotton. PFAS-free. Size: Colour: Quality:
Ladies S-XXL 03 navy 895, 924
Inherent Flame Retardant non-wired bra in a soft tricot with 50% recycled cotton. PFAS-free.
Colour: Quality:
75A, 75B, 75C, 80B, 80C, 85B, 85C, 85D, 90C, 90D, 95C, 95D 03 navy 924
Soft, Non-Metal and Inherent Flame Retardant sports bra with 50% recycled cotton. PFAS-free. S(75A-B), M(80A-B), L(85C-D), XL(90C-D), XXL(95C-D), 4XL(105C-D) 03 navy 924
Colour: Quality:
Soft, Non-Metal and Inherent Flame Retardant sports bra with pocket for breast prosthesis on the inside. 50% recycled cotton. PFAS-free. Size: Colour: Quality:
S(75A-B), M(80A-B), L(85C-D), XL(90C-D), XXL(95C-D), 4XL(105C-D) 03 navy 924
EN ISO 14116 index 3
EN ISO 14116 index 3
EN ISO 14116 index 3
EN ISO 14116 index 3
EN 1149-5
EN 1149-5
EN 1149-5
EN 1149-5
5919 92 FLAME RETARDANT BRIEFS
5918 92 FLAME RETARDANT HIGH BRIEFS
5998 92 FLAME RETARDANT MATERNITY BRIEFS
Non-Metal and Inherent Flame Retardant briefs in a soft tricot with 50% recycled cotton. PFAS-free.
Non-Metal and Inherent Flame Retardant high briefs in a soft tricot with 50% recycled cotton. PFAS-free.
Non-Metal and Inherent Flame Retardant high maternity briefs in a soft tricot with 50% recycled cotton. PFAS-free.
Size: Colour: Quality:
Size: Colour: Quality:
Size: Colour: Quality:
5913 92 FLAME RETARDANT LADIES BOXER BRIEFS Non-Metal and Inherent Flame Retardant boxer briefs in a soft tricot with 50% recycled cotton. PFAS-free. Size: Colour: Quality:
Ladies S-XXL 03 navy 924
Ladies S-XXL, 4XL 03 navy 924
Ladies S-XXL 03 navy 924
Ladies S-XXL 03 navy 924
104
FLAME RETARDANT
COATS & SHIRTS
The products on this section are certified according to:
COATS & SHIRTS Comfortable and practical Flame Retardant coats and work shirts in a stylish design for those who value high quality combined with effective protection. A long coat is a flexible cover garment for a temporary stay in a risk area or for a guest on a temporary visit. All coats are Flame Retardant and Non-Metal. The range of work shirts is large and is available for both men and ladies. Choose from different models with High Visibility, protection against Electric Arc, welding sparks or molten metal. All our shirts and coats meet various certification requirements, such as EN ISO 11612, EN 61482-2, EN 1149-5, EN ISO 11611, EN 13034 and EN ISO 20471. We recommend that you always start with a risk assessment, so that you can choose the right Flame Retardant garment for your needs.
NEW
NEW
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
EN 61482-2 APC 1 ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm²
EN 61482-2 APC 1 ELIM: 6,0 cal/cm² ATPV: 7,4 cal/cm²
EN 1149-5
EN ISO 11611 CL.1 A1+A2
EN ISO 20471 CL.3 CL.2* (S) EN ISO 15797 50 WASHES TRANEMO SKINSAFE
5093 91 FLAME RETARDANT HI-VIS LADIES SHIRT
5678 87 FLAME RETARDANT LADIES SHIRT
Non-Metal and Inherent Flame Retardant Hi-Vis ladies shirt with two chest pockets. The shirt is sewn in a light and easy twill and has soft heat sealed reflective stripes. PFAS-free. Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Ladies Shirt made from a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free.
Ladies S-XXL 55 yellow 911
Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 875
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
IEC 61482-2 APC 1 ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm²
EN 61482-2 APC 1 ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm²
EN 61482-2 APC 1 ELIM: 7,6 cal/cm² ATPV: 11,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 11611 CL.1 A1+A2
EN ISO 20471 CL.2*
TRANEMO SKINSAFE
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
5079 91 FLAME RETARDANT LADIES SHIRT
Non-Metal Inherent Flame Retardant Hi-Vis ladies shirt. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 912
5779 91 FLAME RETARDANT LADIES SHIRT
Non-Metal and Inherent Flame Retardant ladies blouse with increased visibility in a light and flexible fabric. PFAS-free. Size: Colour: Quality:
* For complete information regarding product certifications, visit tranemo.co.uk
Ladies 8-20 94 yellow/navy 911
5778 86 FLAME RETARDANT LADIES SHIRT
Non-Metal Inherent Flame Retardant ladies shirt with increased visibility. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 862
COATS & SHIRTS
FLAME RETARDANT
105
TRANEMO SKINSAFE™
31
APC
SHIELD
EN ISO 11612 A1 B1 C1 F1
5035 88 94
27
ATPV (cal/cm²)
SHIELD
ELIM (cal/cm²)
5770 91 94
CANTEX SYSTEM
EN 61482-2 APC 1 ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm²
911 TERA TX LIGHT ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm², PPE 2
2
884/885 CANTEX WS ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm², PPE 2
18
APC
SHIELD
5834 81 94
ATPV (cal/cm²)
TRANEMO SKINSAFE 5770 91 94
15
SKIN PROTECTION
ELIM (cal/cm²)
EN ISO 20471 CL.3 CL.2* (XS-S) EN ISO 15797 50 WASHES
TRANEMO SKINSAFE™ TERA TX SYSTEM
EN 1149-5
911 TERA TX LIGHT ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm², PPE 2
2
Non-Metal and Inherent Flame Retardant Hi-Vis shirt with two chest pockets. The shirt is sewn in a light and easy twill and has soft heat sealed reflective stripes. PFAS-free. Size: Colour: Quality:
811 TERA TX ELIM: 8,1 cal/cm² ATPV: 8,7 cal/cm², PPE 2
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 E1 F1
IEC 61482-2 APC 1 ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm²
EN 61482-2 APC 1 ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm²
EN 61482-2 APC 1 ELIM: 7,6 cal/cm² ATPV: 11,0 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 11611 CL.1 A1+A2
EN ISO 20471 CL.2*
TRANEMO SKINSAFE
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
5770 91 FLAME RETARDANT SHIRT
5076 91 FLAME RETARDANT SHIRT XS-4XL 94 yellow/navy 912
Size: Colour: Quality:
XS-4XL 55 yellow 911
5774 86 FLAME RETARDANT SHIRT
Non-Metal and Inherent Flame Retardant shirt with increased visibility in a light and flexible fabric. PFAS-free.
Non-Metal Inherent Flame Retardant Hi-Vis shirt. Size: Colour: Quality:
5083 91 FLAME RETARDANT SHIRT
Non-Metal Inherent Flame Retardant shirt with increased visibility. Size: Colour: Quality:
XS-4XL 94 yellow/navy 911
EN ISO 11612 A1+A2 B1 C1 D3 E3 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN 61482-2 APC 1 ELIM: 6,0 cal/cm² ATPV: 7,4 cal/cm²
EN 61482-2 APC 1 ELIM: 5,5 cal/cm² ATPV: 6,3 cal/cm²
EN 61482-2 APC 1 ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm²
EN ISO 11611 CL.1 A1+A2
EN 1149-5
EN 1149-5
XS-4XL 94 yellow/navy 862
TRANEMO SKINSAFE EN ISO 15797 50 WASHES
5674 87 FLAME RETARDANT SHIRT
6354 91 FLAME RETARDANT STRETCH SHIRT
Non-Metal and Inherent Flame Retardant shirt made from a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. PFAS-free. Size: Colour: Quality:
8120 91 FLAME RETARDANT SHIRT
Inherent Flame Retardant office shirt in a comfortable stretch fabric. The shirt is Non-Metal and has a lightly shaped fit with navy details on the inside of the collar, front placket and cuffs. PFAS-free. Size: Colour: Quality:
XS-4XL 94 yellow/navy 875
Non-Metal and Inherent Flame Retardant shirt in a light and easy quality. PFAS-free. Size: Colour: Quality:
XS-4XL 15 light blue 913
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm²
EN 61482-2 APC 1 ELIM: 5,0 cal/cm² ATPV: 5,8 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN 13034 type PB[6]
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
EN ISO 15797 50 WASHES
5931 91 FLAME RETARDANT COAT, ”VISITOR”
5932 91 FLAME RETARDANT COAT
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant coat with “VISITOR” embroidered on chest and back. PFAS-free. XS-3XL 94 yellow/navy 911
* For complete information regarding product certifications, visit tranemo.co.uk
Non-Metal and Inherent Flame Retardant coat with increased visibility in a light and easy quality. PFAS-free. XS-3XL 94 yellow/navy 911
XS-4XL 02 red, 03 navy 911
5935 81 FLAME RETARDANT LAB COAT
Non-Metal and Inherent Flame Retardant lab coat. Back length in size L=102 cm, L-Tall +10cm. Size: Colour: Quality:
XS-4XL, M-3XL Tall 04 white 812
FLAME RETARDANT
SWEATSHIRTS & T-SHIRTS
SWEATSHIRTS & T-SHIRTS Our Flame Retardant sweatshirts and T-shirts for men and ladies are a perfect compliment to your Flame Retardant outerwear. By combining a Flame Retardant sweatshirt or T-shirt with Flame Retardant underwear and jacket, you get maximum protection to suit your particular risk situation and working environment. The products on this section are certified according to:
895 CANTEX JERSEY AT ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm², PPE 1
2
899 CANTEX TERRY ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm², PPE 2
25
SHIELD
25
ATPV (cal/cm²)
6330 90 07
ELIM (cal/cm²)
6315 90 07
27
APC
SHIELD
22
EBT (cal/cm²)
TWO LAYER SYSTEM 5030 89 94
ELIM (cal/cm²)
6372 89 94
TERA TX SYSTEM
SKIN PROTECTION
TRANEMO SKINSAFE™
TRANEMO SKINSAFE™ SKIN PROTECTION
106
901 MERINO RX ELIM: 4,6 cal/cm² ATPV: 5,3 cal/cm², PPE 1
NEW EN ISO 11612 A1+A2 B1 C2 F2 EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm² EN 1149-5 TRANEMO SKINSAFE
6376 89 FLAME RETARDANT HOODIE
Non-Metal, soft and comfortable Inherent Flame Retardant sweatshirt with hood and increased visibility. 50% recycled cotton. PFAS-free. Size: Colour: Quality:
XS-4XL 94 yellow/navy 899
903 MERINO TX ELIM: 9,6 cal/cm² EBT: 10,0 cal/cm², PPE 2
SWEATSHIRTS & T-SHIRTS
FLAME RETARDANT
107
NEW EN ISO 11612 A1+A2 B1 C2 D2 E1 F1 IEC 61482-2 APC 1 ELIM: 9,6 cal/cm² EBT: 10,0 cal/cm² EN 1149-5
*EN ISO 11612 A1+A2 B1 C2 F1
EN ISO 11612 A1 B1 C1 F1
*EN 61482-2 APC 1 ELIM: 9,6 cal/cm² EBT: 10,0 cal/cm²
IEC 61482-2 ARC_RATING: 8,5 cal/cm²
EN 1149-5
EN 1149-5
TRANEMO SKINSAFE
6330 90 FLAME RETARDANT CARDIGAN
Non-Metal and Inherent Flame Retardant cardigan in a heavier weight Merino wool/FR viscose fabric. PFAS-free. Size: Colour: Quality:
5948 89 FLAME RETARDANT TURTLENECK
6335 90 FLAME RETARDANT BODYWARMER
Non-Metal and Inherent Flame Retardant turtleneck with air-gap piping in Hi-Vis material over shoulders and sleeves. The piping provides extra protection by creating a larger air gap between the garment and the skin. PFAS-free.
Non-Metal and Inherent Flame Retardant Bodywarmer in a soft Merino wool terry. PFAS-free. Size: Colour: Quality:
XXS-4XL 07 black 903
XS-4XL 07 black 903
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C2 F2
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 14116 index 3
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
EN 61482-2 APC 1 ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6375 89 FLAME RETARDANT SWEATSHIRT
6372 89 FLAME RETARDANT LONG SLEEVES T-SHIRT
Non-Metal, soft and comfortable Inherent Flame Retardant sweatshirt with round neck and increased visibility. 50% recycled cotton. PFAS-free. Size: Colour: Quality:
6379 89 FLAME RETARDANT T-SHIRT
Non-Metal and Inherent Flame Retardant T-shirt with long sleeves and increased visibility. 50% recycled cotton. PFAS-free.
XXS-4XL 94 yellow/navy 899
Size: Colour: Quality:
XS-4XL 03 navy 896
Non-Metal and Inherent Flame Retardant T-shirt and increased visibility with 50% recycled cotton. PFAS-free.
XS-4XL 94 yellow/navy 895
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C2 F2
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 14116 index 3
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
EN 61482-2 APC 1 ELIM: 4,8 cal/cm² EBT: 5,4 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
TRANEMO SKINSAFE
TRANEMO SKINSAFE
XS-4XL 94 yellow/navy 895
6371 89 FLAME RETARDANT SWEATSHIRT
5945 89 FLAME RETARDANT LONG SLEEVES POLOSHIRT
5905 89 FLAME RETARDANT POLOSHIRT
Size: Colour: Quality:
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal, soft and comfortable Inherent Flame Retardant sweatshirt with collar and buttons. 50% recycled cotton. PFAS-free.
Non-Metal and Inherent Flame Retardant poloshirt with long sleeves and 50% recycled cotton. PFAS-free.
XS-4XL 03 navy 899
Non-metal and Inherent Flame Retardant poloshirt with short sleeves and 50% recycled cotton. PFAS-free.
XS-4XL 03 navy 897
EN ISO 11612 A1+A2 B1 C2 F2
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 14116 index 3
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
IEC 61482-2 CL.1
EN 1149-5
EN 1149-5
EN 1149-5
XS-4XL 03 navy 897
TRANEMO SKINSAFE
5985 89 FLAME RETARDANT SWEATSHIRT
Non-Metal, soft and comfortable Inherent Flame Retardant sweatshirt with round neck and 50% recycled cotton. PFAS-free. Size: Colour: Quality:
XS-4XL 03 navy 899
* For complete information regarding product certifications, visit tranemo.co.uk
5947 89 FLAME RETARDANT LONG SLEEVES T-SHIRT
5907 89 FLAME RETARDANT T-SHIRT
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant T-shirt with long sleeves in a soft single jersey. PFAS-free. XS-4XL 03 navy 894
Non-Metal and Inherent Flame Retardant T-shirt in a soft single jersey. PFAS-free. XS-4XL 03 navy 894
108
FLAME RETARDANT
SWEATSHIRTS & T-SHIRTS NEW
The products on this section are certified according to:
EN ISO 11612 A1+A2 B1 C2 F2
EN ISO 11612 A1+A2 B1 C2 F2
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
EN 1149-5
EN 1149-5
TRANEMO SKINSAFE
EN ISO 20471 CL.3 CL.2* (XS-S)
EN ISO 20471 CL.3 CL.2* (XS-M)
TRANEMO SKINSAFE
5031 89 FLAME RETARDANT HOOD JACKET
5030 89 FLAME RETARDANT CARDIGAN
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis sweatshirt jacket with hood in a soft sweatshirt fabric with 50% recycled cotton. PFAS-free.
Non-Metal and Inherent Flame Retardant Hi-Vis cardigan in a soft sweatshirt fabric with 50% recycled cotton. PFAS-free.
XS-4XL 94 yellow/navy 899
EN ISO 11612 A1+A2 B1 C2 F2
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 14116 index 3
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
EN 61482-2 APC 1 ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
*EN ISO 20471 CL.2 CL.1 (XXS-XS)
EN ISO 20471 CL.2*
EN ISO 20471 CL.2*
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5085 89 FLAME RETARDANT SWEATSHIRT
5082 89 FLAME RETARDANT LONG SLEEVES T-SHIRT
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis sweatshirt with round neck. PFAS-free and 50% recycled cotton.
5081 89 FLAME RETARDANT T-SHIRT
Non-Metal and Inherent Flame Retardant High Visibility polo shirt in tricot with a cotton finish on the inside for comfort. PFAS-free and 50% recycled cotton.
Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with long sleeves. PFAS-free and 50% recycled cotton.
XXS-4XL 94 yellow/navy 899
XXS-4XL 94 yellow/navy 895
Size: Colour: Quality:
EN ISO 11612 A1+A2 B1 C2 F2
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1 B1 C2 F1
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
EN 61482-2 APC 1 ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm²
IEC 61482-2 APC 1 ARC_RATING: 11,3 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.3
EN ISO 20471 CL.3
EN ISO 20471 CL.3 CL.2* (XS)
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5087 89 FLAME RETARDANT LONG SLEEVES T-SHIRT
5088 89 FLAME RETARDANT HALF ZIP SWEATSHIRT
Size: Colour: Quality:
Size: Colour: Quality:
XS-4XL 55 yellow 899
XXS-4XL 94 yellow/navy 895
5270 89 FLAME RETARDANT SWEATSHIRT
Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with long sleeves and 50% recycled cotton. PFAS-free.
Soft and comfortable, Non-Metal and Inherent Flame Retardant Hi-Vis sweatshirt with a short zip in front. PFAS-free and 50% recycled cotton.
XS-4XL 94 yellow/navy 899
Soft and comfortable Non-Metal and Inherent Flame Retardant sweatshirt with short zipped front. PFAS-free.
XS-4XL 55 yellow 895
Size: Colour: Quality:
XS-4XL 50 orange 892
NEW EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 14116 index 3
EN ISO 14116 index 3
EN 61482-2 APC 1 ELIM: 8,3 cal/cm² EBT: 9,3 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.3 CL.2* (XS-S)
EN ISO 20471 CL.3 CL.2* (XS-M)
EN ISO 20471 CL.3
5084 86 FLAME RETARDANT LONG SLEEVES T-SHIRT
5086 89 FLAME RETARDANT T-SHIRT
5271 89 FLAME RETARDANT T-SHIRT
Size: Colour: Quality:
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with long sleeves. PFAS-free. XS-4XL 55 yellow 864
Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with 50% recycled cotton. PFAS-free.
* For complete information regarding product certifications, visit tranemo.co.uk
XS-4XL 55 yellow 895
Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with a soft inside. PFAS-free. XS-4XL 50 orange 891
SWEATSHIRTS & T-SHIRTS LADIES
FLAME RETARDANT
109
NEW EN ISO 11612 A1+A2 B1 C2 F2
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 14116 index 3
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
EN 61482-2 APC 1 ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
TRANEMO SKINSAFE
TRANEMO SKINSAFE
6377 89 FLAME RETARDANT LADIES HOODIE
Non-Metal, soft and comfortable Inherent Flame Retardant ladies sweatshirt with hood and increased visibility. 50% recycled cotton. PFAS-free. Size: Colour: Quality:
NEW
6373 89 FLAME RETARDANT LADIES LONG SLEEVES T-SHIRT
6378 89 FLAME RETARDANT LADIES T-SHIRT
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant ladies T-shirt with long sleeves and increased visibility and 50% recycled cotton. PFAS-free.
Ladies S-XXL 94 yellow/navy 899
Non-Metal and Inherent Flame Retardant ladies T-shirt with increased visibility and 50% recycled cotton. PFAS-free.
Ladies S-XXL 94 yellow/navy 895
Ladies S-XXL 94 yellow/navy 895
NEW EN ISO 11612 A1+A2 B1 C2 F2
EN ISO 11612 A1+A2 B1 C2 F2
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
EN 61482-2 APC 1 ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.3 CL.2* (S-XL)
EN ISO 20471 CL.3 CL.2* (S)
EN ISO 20471 CL.2*
TRANEMO SKINSAFE
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5038 89 FLAME RETARDANT LADIES HOOD JACKET
5039 89 FLAME RETARDANT LADIES CARDIGAN
Non-Metal and Inherent Flame Retardant Hi-Vis sweatshirt jacket with hood in a soft sweatshirt fabric with 50% recycled cotton. PFAS-free. Size: Colour: Quality:
5089 89 FLAME RETARDANT LADIES LONG SLEEVES T-SHIRT
Non-Metal and Inherent Flame Retardant Hi-Vis ladies cardigan in a soft sweatshirt fabric with 50% recycled cotton. PFAS-free. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 899
NEW
Non-Metal and Inherent Flame Retardant ladies Hi-Vis T-shirt with long sleeves and 50% recycled cotton. PFAS-free.
Ladies S-XXL 94 yellow/navy 899
Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 895
NEW
NEW
EN ISO 11612 A1+A2 B1 C2 F2
EN ISO 11612 A1+A2 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm²
EN 61482-2 APC 1 ELIM: 8,3 cal/cm² EBT: 9,3 cal/cm²
EN 61482-2 APC 1 ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm²
EN 1149-5
EN 1149-5
EN 1149-5
EN ISO 20471 CL.3
EN ISO 20471 CL.3 CL.2* (S)
EN ISO 20471 CL.3 CL.2* (S)
TRANEMO SKINSAFE
TRANEMO SKINSAFE
5099 89 FLAME RETARDANT LADIES HALF ZIP SWEATSHIRT
5094 86 FLAME RETARDANT LADIES LONG SLEEVES T-SHIRT
Size: Colour: Quality:
Size: Colour: Quality:
Soft and comfortable, Non-Metal and Inherent Flame Retardant Ladies Hi-Vis Sweatshirt with a short zip in front. PFASfree and 50% recycled cotton. Ladies S-XXL 55 yellow 899
* For complete information regarding product certifications, visit tranemo.co.uk
Non-Metal and Inherent Flame Retardant ladies Hi-Vis T-shirt with long sleeves. PFAS-free. Ladies S-XXL 55 yellow 864
5098 89 FLAME RETARDANT LADIES LONG SLEEVES T-SHIRT Non-Metal and Inherent Flame Retardant ladies Hi-Vis T-shirt with long sleeves and 50% recycled cotton. PFAS-free. Size: Colour: Quality:
Ladies S-XXL 55 yellow 895
110
FLAME RETARDANT
GLOVES
GLOVES The Eureka gloves are long-awaited solutions for those who work in an Electric Arc risk environment. These gloves offer excellent dexterity combined with high levels of cut protection to protect the hands while working with sharp edges. The gloves offer a level of breathability and have oil repellent properties. The material in the gloves is based on selected para-Aramids, antistatic yarns and advanced coating technology to provide protection from Heat, Flame and Electric Arc
EN 407 42424X
RG00 08 FLAME RETARDANT WATERPROOF GLOVES ARC 12
EN 388 2X43D
Waterproof Flame Retardant glove with high Electric Arc protection and good cut resistance. (Eureka 1510-4HAF-12-WP)
ANSI CUT A4
Size: Colour:
ASTM F2675 ATPV 12 cal/cm²
8/S-12/XXL 00 multi-colour
EN 407 41XXXX
EN 407 41XXXX
EN 407 4121XX
EN 388 3442C
EN 388 3X31D
EN 388 2X31B
ANSI CUT A3
ANSI CUT A4
ANSI CUT A2
ASTM F2675 ATPV Palm 22 cal/cm² Back of hand 5,9 cal/cm²
ASTM F2675 ATPV 9.7 cal/cm²
IEC 61482-1-2 (Gloves) CL.1
IEC 61482-1-2 (Gloves) CL.1
RG00 01 FLAME RETARDANT GLOVES CONTACT
Flame Retardant, comfortable glove with good thermal insulation (13-3HNFR) Size: Colour:
RG00 09 FLAME RETARDANT GLOVES ARC 10
Size: Colour:
Size: Colour:
Thin Flame Retardant glove with highest levels of dexterity with Electric Arc protection and cut resistance. (Eureka 15-4 HAF4)
7/XS-11/XL 00 multi-colour
EN 407 41324X
RG00 06 FLAME RETARDANT GLOVES ARC 4
7/XS-11/XL 00 multi-colour
7/XS-12/XXL 00 multi-colour
EN 60903 CL.0
EN 407 41324X
EN 388 3X43E
Ultra thin Flame Retardant glove with unique comfort and Electric Arc protection. (Eureka 18-2 HAF-10)
EN 388 3X43E
ANSI CUT A5
ANSI CUT A5
ASTM F2675 ATPV Palm 30 cal/cm² Back of hand 16 cal/cm² Print 40 cal/cm²
ASTM F2675 ATPV Palm 42 cal/cm² Back of hand 59 cal/cm² IEC 61482-1-2 (Gloves) CL.2
IEC 61482-1-2 (Gloves) CL.2
RG00 04 FLAME RETARDANT GLOVES ARC 16
RG00 05 FLAME RETARDANT GLOVES ARC 40
Size: Colour:
Size: Colour:
Glove with high Electric Arc protection. (13-4HFRAF) 7/XS-12/XXL 00 multi-colour
Flame Retardant glove with very high Electric Arc protection. (Eureka 13-4 HAF50) 8/S-12/XXL 00 multi-colour
RG00 10 INSULATING GLOVES
Electrically insulating gloves, EN 60903 class 0. The gloves are intended for working with live electricity. Leather over-gloves are recommended for additional protection. Size: Colour:
9/M-11/XL 00 multi-colour
WELDING ACCESSORIES
WELDING ACCESSORIES To give you extra protection and at the same time extend the life of your protective clothing, you can advantageously use our welding accessories that are adapted for different tasks.
UPDATED
*EN ISO 11612 A1 B1 C1 F1 *EN ISO 11611 CL.1 A1
5572 19 WELDING CHAPS
Flame Retardant chaps in a very light and comfortable fabric with extremely good protection for welding. PFAS-free. Size: Colour: Quality:
One size 38 burnt olive 192
UPDATED
5573 80 WELDING PONCHO EN ISO 11612 A1+A2 B1 C1 F1 EN ISO 11611 CL.1 A1+A2
*EN ISO 11611 CL.1 A1
*EN ISO 11611 CL.1 A1
Size: Colour: Quality:
One size 07 black 801, 885
UPDATED
*EN ISO 11612 A1 B1 C1 F1
*EN ISO 11612 A1 B1 C1 F1
Flame Retardant poncho with collar in a very durable heavy fabric with good protection for welding against metal splashes.
Apron with collar in a very light and comfortable fabric with extremely good protection for welding. PFAS-free. One size 38 burnt olive 192
Flame Retardant short apron in a very light and comfortable fabric with extremely good protection for welding. PFAS-free. Size: Colour: Quality:
5576 19 WELDING APRON WITH COLLAR
Size: Colour: Quality:
5575 19 WELDING APRON, SHORT
One size 38 burnt olive 192
UPDATED
UPDATED
*EN ISO 11612 A1 B1 C1 F1 *EN ISO 11611 CL.1 A1
*EN ISO 11612 A1 B1 C1 F1 *EN ISO 11611 CL.1 A1
5577 19 WELDING SLEEVE PROTECTION
5578 19 WELDING BALACLAVA
Flame Retardant balaclava in a weaved fabric to be worn under a welding helmet. PFAS-free. Size: Colour: Quality:
One size 00 multi-colour 192, 885
Flame Retardant sleeve protection in a light and comfortable fabric with extremely good protection for welding. PFAS-free. Size: Colour: Quality:
One size 38 burnt olive 192
9142 88 WELDING CAP
Flame Retardant welding cap. Size: Colour: Quality:
* For complete information regarding product certifications, visit tranemo.co.uk
One size 64 dark grey 880
FLAME RETARDANT
111
112
FLAME RETARDANT
HEAD PROTECTION
HEAD PROTECTION Increase your personal safety with our head protection which consists of Electric Arc protected helmets, face shields, hoods and balaclavas. The safety helmets meet the requirements of EN 397: 2012+A1:2012 (-40°C - +50°C), EN 50365:2002 Class 0 and EN 166:2001. The range also includes head protection against Electric Arc with a helmet, visor and hood as a certified system. Together with a Flame Retardant balaclava, you get a comprehensive Electric Arc protection.
NEW GS-ET-29 APC 1
GS-ET-29 APC 2
EN ISO 11612 A1+A2 B1 C2 F1
ASTM F2178 ATPV 36 cal/cm²
EN 61482-2 APC 2 GS-ET-29 APC 2 EN ISO 11611 CL.2 A1+A2
RX00 01 SAFETY HELMET BOX CL.1
RX00 21 SAFETY HELMET ARC 36
Helmet with integrated face shield and protection against Electric Arc.
Helmet with integrated face shield and protection against Electric Arc.
Size: Colour:
Size: Colour:
One size 04 white
One size 04 white
RX00 22 FLAME RETARDANT NECK AND EAR COVER FOR HELMET
EN ISO 11612 A1 B2 C2 F2
ASTM F2178 ATPV 40 cal/cm²
Flame Retardant and Anti-Static neck and ear cover to be attached to helmet RX0001 or RX0021. Size: Colour:
EN 1149-5
One size 03 navy
GS-ET-29 APC 2
SA00 01 ELECTRIC ARC HOOD + VISOR + HELMET
9179 95 ELECTRIC ARC HOOD
Combined set with Electric Arc hood 9179, integrated lift-front visor RX0018 and helmet with chin strap.
Inherent Flame Retardant Electric Arc hood for helmet and face shield. Made in softshell fabric with high arc protection.
Size: Colour:
Size: Colour: Quality:
One size 03 navy
RX00 18 ELECTRIC ARC VISOR
Highly transparent 3Phase® Arc Flash protection lift-front visor. Size: Colour:
One size 03 navy 955
EN ISO 11612 A1 B1 C2 F1
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 1149-5
EN 1149-5
EN 1149-5
9195 89 FLAME RETARDANT BALACLAVA
Soft balaclava with high protection against Electric Arc. Sewn in double tricot with ELIM: 22,0 cal/cm², EBT: 27,0 cal/cm², APC 2. 50% recycled cotton. PFAS-free. Size: Colour: Quality:
One size 03 navy 899, 895
5995 92 FLAME RETARDANT BALACLAVA
Non-Metal and Inherent Flame Retardant balaclava in tricot with 50% recycled cotton. PFAS-free. Size: Colour: Quality:
One size 03 navy 920
One size 00 multi-colour
6308 90 FLAME RETARDANT BALACLAVA
Non-Metal and Inherent Flame Retardant balaclava in soft tricot Merino wool and FR viscose. PFAS-free. Size: Colour: Quality:
One size 07 black 902
CAPS & NECK PROTECTION The products on this section are certified according to:
FLAME RETARDANT
113
NEW
NEW EN ISO 14116 index 3
EN ISO 14116 index 3
EN 1149-5
9148 93 FLAME RETARDANT PILOT CAP
5994 91 FLAME RETARDANT HEADSCARF
Size: Colour: Quality:
Size: Colour: Quality:
Pilot cap with quilted lining and fibre fur. Outer fabric with 20% recycled fibres. PFAS-free.
EN ISO 14116 index 3 EN 1149-5
M (57/58 cm), L (60/61 cm) 55 yellow 932, 054, 060
EN ISO 14116 index 3
EN ISO 14116 index 3
EN 1149-5
EN 1149-5
6307 90 FLAME RETARDANT WOOL HAT
5970 89 FLAME RETARDANT HAT
Size: Colour: Quality:
M, L 55 yellow 050, 893
Non-Metal and Inherent Flame Retardant fleece hat that fits well under a helmet. PFAS-free. Size: Colour: Quality:
One size 07 black 902
EN ISO 14116 index 3
EN ISO 11612 A1 B1 C1 F1
EN ISO 11612 A1+A2 B1 C1 F1
EN 1149-5
EN 1149-5
EN 1149-5
6395 90 FLAME RETARDANT WOOL BEANIE
Non-Metal and Inherent Flame Retardant beanie in jacquard knitted fabric of tricot in soft Merino wool and FR viscose. PFAS-free. Size: Colour: Quality:
One size 82 black/grey 904
NEW
One size 03 navy 911
9043 00 FLAME RETARDANT FLEECE HAT
Non-Metal and Inherent Flame Retardant cap to be used under a helmet, in a thinner tricot in soft Merino wool and FR viscose. PFAS-free.
Non-Metal and Inherent Flame Retardant Hi-Vis hat with fleece lining and 50% recycled cotton. PFAS-free. Size: Colour: Quality:
Inherent Flame Retardant headscarf that can be worn as a hijab.
One size 03 navy 893
6397 90 FLAME RETARDANT NECK PROTECTION
5999 00 FLAME RETARDANT NECK PROTECTION
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal and Inherent Flame Retardant neck protection in Merino Wool and FR viscose, that provides good protection against exposure of Electric Arc. PFAS-free. One size 82 black/grey 904
Non-Metal and Inherent Flame Retardant neck protection that provides good protection against exposure of Electric Arc. 50% recycled cotton. PFAS-free. One size 03 navy 051
NEW
9065 81 FLAME RETARDANT HOOD
Adjustable hood with wind and waterproof jersey lining. Can be attached to articles 5801/5802/5868, 5800/5803/5869 and 5832 81. Size: Colour: Quality:
One size 55 yellow 811, 898
9151 93 FLAME RETARDANT HOOD
PFAS-free, Non-Metal and Inherent Flame Retardant adjustable hood with taped seams and quilted lining. Can be attached to articles 5101 93 and 5103 93. Outer fabric with 20% recycled fibres. Size: Colour: Quality:
One size 55 yellow 932, 054
9151 82 FLAME RETARDANT HOOD
Adjustable hood with wind and waterproof jersey lining. Can be attached to articles 5205 82 and 5206 82. Size: Colour: Quality:
One size 50 orange 822, 054
114
FLAME RETARDANT
SOCKS & ACCESSORIES
EN ISO 14116 index 3 EN 1149-5
ACCESSORIES
9176 00 FLAME RETARDANT CALF SUPPORT
Practical accessories for Tranemo’s Flame Retardant clothing. Choose between Flame Retardant kneepads, armlets, ID card pocket etc.
Inherent Flame Retardant calf support in 50% recycled cotton. PFAS-free. Size: Colour: Quality:
EN ISO 14116 index 3
EN ISO 14116 index 3
EN ISO 14116 index 3
EN 1149-5
EN 1149-5
EN 1149-5
M(30-36cm) / L(32-38cm) / XL(34-40cm) 03 navy 48% modacrylic / 30% cotton / 18% elastane / 2% polyamide / 2% antistatic
9074 00 FLAME RETARDANT LIGHTWEIGHT SOCK
9075 00 FLAME RETARDANT SOCK
Lightweight Inherent Flame Retardant work sock in wool/ FR viscose. PFAS-free.
Heavyweight Inherent Flame Retardant winter sock in wool/ FR viscose. PFAS-free.
9054 00 FLAME RETARDANT SOCK
Size: Colour: Quality:
Size: Colour: Quality:
Size: Colour: Quality:
37-39, 40-42, 43-45, 46-48 07 black 35% wool / 35% FR viscose / 25% polyamide / 3% antistatic / 2% elastane
Inherent Flame Retardant work sock with 50% recycled cotton. PFAS-free.
37-39, 40-42, 43-45, 46-48 07 black 45% wool / 35% FR viscose / 15% polyamide / 3% antistatic / 2% elastane
NEW
NEW
EN ISO 14116 index 3
EN ISO 14116 index 3
EN ISO 14116 index 3
EN 1149-5
EN 1149-5
EN 1149-5
9079 00 FLAME RETARDANT WOOL TERRY SOCK
9171 00 FLAME RETARDANT THICK SOCK
Size: Colour: Quality:
Size: Colour: Quality:
Heavyweight Inherent Flame Retardant sock in wool terry. PFAS-free.
EN ISO 14116 index 3
9172 00 FLAME RETARDANT THICK SOCK
Inherent Flame Retardant thick sock with technically advanced knitted parts for extra good fit. PFAS-free.
37-39, 40-42, 43-45, 46-48 07 black 45% wool / 35% FR viscose / 15% polyamide / 3% antistatic / 2% elastane
34-36, 37-39, 40-42, 43-45, 46-48, 49-51 03 navy 42% modacrylic / 28% cotton / 22% polyamide / 6% elastane / 2% antistatic
Inherent Flame Retardant knee height thick sock with technically advanced knitted parts for extra good fit. PFAS-free.
37-39, 40-42, 43-45, 46-48 07 black 49% wool / 28% viscose / 15% polyamide / 5% elastane / 3% antistatic
EN ISO 14116 index 3
Size: Colour: Quality:
37-39, 40-42, 43-45, 46-48 07 black 49% wool / 28% viscose / 15% polyamide / 5% elastane / 3% antistatic
EN ISO 14116 index 1 EN ISO 20471 CL.3
9128 06 FLAME RETARDANT FIBREFUR LINING
9129 06 FLAME RETARDANT LADIES FIBREFUR LINING
Size: Colour: Quality:
Size: Colour: Quality:
Non-Metal, Inherent Flame Retardant fibrefur lining without sleeves. Fits jackets 5118 94 and 5135 94. PFAS-free. XS-4XL 06 grey 060
Non-Metal, Inherent Flame Retardant fibrefur lining without sleeves. Fits in jackets 5137 94 and 5138 94. PFAS-free. Ladies S-XXL 06 grey 060
RS00 04 FLAME RETARDANT HI-VIS WAISTCOAT
Flame Retardant Hi-Vis waistcoat with a short sleeve. Size: Colour: Quality:
M-XXL 50 orange, 55 yellow 100% polyester
BELTS, BRACES & ACCESSORIES
9160 81 FLAME RETARDANT BRACES FOR TOOL HOLDER BELT LOOPS
9060 00 FLAME RETARDANT BRACES
Inherent Flame Retardant braces with metal buckles.
Non-Metal, Anti-Static and Flame Retardant extra wide braces to reduce and help spread strain on the shoulders. Size: Colour: Quality:
Size: Colour: Quality:
One size 03 navy 811, , 802
9055 00 FLAME RETARDANT BELT
One size 03 navy 80% nomex / 50% elastane, EN ISO 11612 A1
9093 00 LEATHER BELT
Non-Metal and Inherent Flame Retardant belt with plastic buckle. Size: Colour: Quality:
FLAME RETARDANT
Leather belt with covered metal buckle with no exposed metal which is a requirement for Electric Arc garments. Also helps protect against risk of scratching when working in sensitive environments.
S, L, XXL 07 black 58% polyester / 25% modacrylic / 16% cotton / 1% antistatic
Size: Colour: Quality:
One size 07 black Leather
NEW EN 14404 Type 2 Level 1
9094 80 FLAME RETARDANT TOOL POCKETS
9095 82 FLAME RETARDANT TOOL POCKETS
Size: Colour: Quality:
Size: Colour: Quality:
Loose Nail pockets to be placed on belt 9093 00 and fits well on for example rail cutting trousers 5024 88.
Loose Nail pockets to be placed on belt 9093 00 and fits well on for example rail cutting trousers 5284 82.
One size 55 yellow 802, 885
EN ISO 14116 index 3
EN ISO 14116 index 3
EN 1149-5
EN 1149-5
One size 50 orange 821, 885, 802
9105 81 FLAME RETARDANT ARMLET
9105 84 FLAME RETARDANT ARMLET
Size: Colour: Quality:
Size: Colour: Quality:
Yellow Inherent Flame Retardant armlet. To stay in place, the armlet should be mounted on the sleeve pocket with velcro. One size 94 yellow/navy 811, 050
Orange Inherent Flame Retardant armlet. To stay in place, the armlet should be mounted on the sleeve pocket with velcro. One size 93 orange/navy 846, 050
9120 00 KNEEPADS
The kneepads can be used both with Flame Retardant workwear and regular workwear and meets the requirements of EN ISO 11612:2015 limited flame spread A1. Size: Colour: Quality:
One size 00 multi-colour 100% Ethylene Vinyl Acetate, Shell: Fawolon
9119 81 FLAME RETARDANT ID-POCKET
Flame Retardant Identity card pocket fits on keyring holder with plastic button closing. Size: Colour: Quality:
One size 03 navy 811
115
116
117
HIGH VISIBILITY & WORKWEAR For people who have a job that does not require Flame Retardant clothing, we have a wide range of garments suitable for industry, warehousing and crafts professions. If you work outdoors or in busy environments, we recommend our High Visibility clothing for better visibility in both daylight and darkness. We always choose the best materials for our workwear to ensure high quality, good comfort and excellent durability. Our workwear lasts a long time which helps us contribute towards reducing our impact on the climate.
VISION HV - OUTERWEAR O
R
T
ST
RIC
T LEGISL
AT
IO
N PF
SU
TO
PP
HIGH VISIBILITY
CO
O
C
’S
V
SE
VISION HV
EM
EM
EN
CH
T
AS
WE
118
RP
OUTERWEAR
VISION HV Outerwear is the range for those who work outdoors in all seasons. When you work outdoors, it is important to be seen properly in daylight as well as in the dark, while staying warm. Vision HV is specially designed to be visible, warm, and comfortable. Working outdoors means having to work in all weathers, both in snow and cold as well as in rain and wind. This requires high quality, High Visibility clothing that protects you against both the weather and the risks at work. Tranemo’s range of outerwear is functional but also comfortable, in addition they have a modern and stylish fit. All functional garments have an outer material that is light and flexible with good breathability. The functional garments have taped seams and are certified according to EN 343. The winter-lined functional garments are also certified for cold, EN 342. Vision HV Outerwear is also a good choice from a sustainability perspective as the entire collection is completely free of PFAS. At Tranemo we are actively working to phase out PFAS from our products and reduce the use of chemicals. With Vision HV, you can be active and perform at work, regardless of the weather. The products on this section are certified according to:
VISION HV - OUTERWEAR LADIES
NEW
NEW
EN ISO 20471 CL.3 CL.2* (S) EN 343 4.1 ***EN 342 (4303+4307) **RIS-3279-TOM
4303 46 HI-VIS LADIES WINTER JACKET
PFAS-free and durable High Visibility ladies winter jacket with removable hood and taped seams. The jacket is wind and waterproof according to EN 343. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy, 94 yellow/navy 466, 008, 003
* For complete information regarding product certifications, visit tranemo.co.uk
EN ISO 20471 CL.2 EN 343 4.3 *EN 342 (4303+4307) **RIS-3279-TOM
4307 46 HI-VIS LADIES SHELL TROUSERS
Durable and PFAS-free High Visibility ladies shell trousers with taped seams, mesh lining and removable braces. Wind and waterproof according to EN 343. Size: Colour: Quality:
Ladies S-XXL 93 orange/navy, 94 yellow/navy 466, 213, 007, 002
O R AT E PF
AS
M
VISION HV - OUTERWEAR
EN ISO 20471 CL.3 EN 343 4.1 *EN 342 (4301+4305) **RIS-3279-TOM
4301 46 HI-VIS WINTER JACKET
PFAS-free and durable High Visibility Winter jacket with removable hood and taped seams. The jacket is wind and waterproof according to EN 343. Size: Colour: Quality:
XXS-4XL 93 orange/navy, 94 yellow/navy 466, 008, 003
EN ISO 20471 CL.3 CL.2* (XS)
4308 46 HI-VIS SHELL JACKET
Durable and PFAS-free High Visibility shell jacket with taped seams, mesh lining and detachable hood. Wind and waterproof according to EN 343.
EN 343 4.3
Size: Colour: Quality:
**RIS-3279-TOM
EN ISO 20471 CL.3 CL.2* (XS) EN 343 4.1 *EN 342 (4318+4305)
XS-4XL 93 orange/navy, 94 yellow/navy 466, 002, 007
HIGH VISIBILITY
119
4318 46 HI-VIS WINTER PARKA
Durable and PFAS-free High Visibility Winter jacket with quilted lining, taped seams and a detachable fleece/quilt lining. The parka is wind and waterproof according to EN 343. Size: Colour: Quality:
XS-4XL 94 yellow/navy 466, 003
NEW
9048 00 PILOT CAP
Pilot cap with quilted lining and fibre fur. PFASfree. Size: Colour: Quality:
M (57/58 cm), L (60/61 cm) 55 yellow 466, 003, 008
EN ISO 20471 CL.2 EN 343 4.3 *EN 342 (4301+4305) **RIS-3279-TOM
EN ISO 20471 CL.3 CL.2* (XS-S) **RIS-3279-TOM
4332 48 HI-VIS SOFTSHELL JACKET
Wind and water resistant PFAS-free High Visibility softshell jacket with a very high level of comfort. Size: Colour: Quality:
4305 46 HI-VIS SHELL TROUSERS
Durable and PFAS-free High Visibility shell trousers with taped seams, mesh lining and removable braces. Wind and waterproof according to EN 343. Size: Colour: Quality:
*EN ISO 20471 CL.2 CL.1 (XS-L)
XS-4XL 93 orange/navy, 94 yellow/navy 466, 213, 007, 002
* For complete information regarding product certifications, visit tranemo.co.uk
XS-4XL 93 orange/navy, 94 yellow/navy 480
EN ISO 20471 CL.3 EN 343 4.1 *EN 342 **RIS-3279-TOM
4362 48 HI-VIS SOFTSHELL WAISTCOAT
Wind and water resistant PFAS-free High Visibility softshell waistcoat with a very high level of comfort. Size: Colour: Quality:
XS-4XL 93 orange/navy, 94 yellow/navy 480
4315 46 HI-VIS WINTER BOILERSUIT
Durable and PFAS-free High Visilbility winter boilersuit with taped seams and quilted lining. Wind and waterproof according to EN 343. The boilersuit is ergonomically shaped for work with raised arms. Size: Colour: Quality:
XS-4XL 93 orange/navy, 94 yellow/navy 466, 213, 003
120
HIGH VISIBILITY
VISION HV
VISION HV Achieve new levels of comfort and freedom of movement with Vision HV. This High Visibility range has been developed to create maximum mobility for the user during physically demanding work. If you are looking for comfortable Hi-Vis clothing, Vision HV is the collection for you. The majority of the range is made of flexible and durable stretch fabric, which makes them very comfortable to move in. Stretch panels combined with a base material with a high percentage of cotton, gives a soft feeling against the skin and makes them extremely comfortable to wear during physically demanding work. All garments are available in both men’s and ladies sizes and thanks to the fibre mixture with polyester, the garments are very durable. To cope with extra hard wear and tear on the knee protection pockets and hanging pockets, they are both reinforced with HTPA - High Tenacity Polyamide - which gives an extra-high wear and tear resistance. This significantly extends the life of the garment. With a modern and comfortable fit, Vision HV is the High Visiblity clothing you never want to take off. Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk. 440: Fluorescent, 54% cotton / 46% polyester, twill with ripstop, 260 g/m² 400: 65% polyester / 35% cotton, 245 g/m²
c95mt
VISION HV LADIES
4339 44 HI-VIS LADIES JACKET Size: Colour: Quality:
**RIS-3279-TOM
EN ISO 20471 CL.1
EN ISO 20471 CL.2 CL.1 (6-8) *RIS-3279-TOM
EN ISO 20471 CL.1
Ladies 6-20 93 orange/navy, 94 yellow/navy 400, 441, 310, 213
4329 44 HI-VIS LADIES STRETCH TROUSERS
High Visibility ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.
EN ISO 20471 CL.2 CL.1 (6-12)
Size: Colour: Quality:
*RIS-3279-TOM
Ladies 6-20 93 orange/navy, 94 yellow/navy 441, 400, 310, 213
Maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back. Size: Colour: Quality:
Maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back. Ladies 6-20 93 orange/navy, 94 yellow/navy 441, 400, 310, 213, 050
4388 44 HI-VIS LADIES STRETCH SHORTS EN ISO 20471 CL.1
High Visibility ladies shorts with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
Ladies 6-20 93 orange/navy, 94 yellow/navy 441, 400, 310
* For complete information regarding product certifications, visit tranemo.co.uk
EN ISO 20471 CL.1
High Visibility ladies trousers with nail pockets, kneepad pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
EN ISO 20471 CL.2 CL.1 (6-12) *RIS-3279-TOM
High Visibility ladies trousers with nail pockets, kneepad pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
High Visibility ladies shorts with nail pocket and stretch for excellent fit and increased comfort ensuring full mobility at work. Nail pockets reinforced with HTPA. Size: Colour: Quality:
Ladies 6-20 93 orange/navy, 94 yellow/navy 400, 441, 310, 213
4359 44 HI-VIS LADIES CRAFTSMAN STRETCH TROUSERS
4389 44 HI-VIS LADIES CRAFTSMAN STRETCH SHORTS EN ISO 20471 CL.1
Ladies 6-20 93 orange/navy, 94 yellow/navy 400, 441
4358 44 HI-VIS LADIES CRAFTSMAN STRETCH TROUSERS
Ladies 6-20 93 orange/navy, 94 yellow/navy 440, 400, 310, 213, 050
4327 44 HI-VIS MATERNITY STRETCH TROUSERS
Size: Colour: Quality:
Scratch free High Visibility ladies trousers with double cargo pockets. Size: Colour: Quality:
4326 44 HI-VIS MATERNITY STRETCH TROUSERS
High Visibility ladies trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
EN ISO 20471 CL.1
Ladies S-XXL 93 orange/navy, 94 yellow/navy 440, 400
4328 44 HI-VIS LADIES STRETCH TROUSERS
121
4325 44 HI-VIS LADIES TROUSERS
High Visibility ladies jacket with many pockets.
EN ISO 20471 CL.3 CL.2* (S-M)
HIGH VISIBILITY
Ladies 6-20 93 orange/navy, 94 yellow/navy 441, 400, 310, 213
Ladies 6-20 93 orange/navy, 94 yellow/navy 441, 400, 310, 213
122
HIGH VISIBILITY
VISION HV
4330 44 HI-VIS JACKET EN ISO 20471 CL.3 *RIS-3279-TOM
4335 44 HI-VIS JACKET + FLEECE LINING 9028
High Visibility jacket. Size: Colour: Quality:
XS-4XL 93 orange/navy, 94 yellow/navy 440, 400
EN ISO 20471 CL.3 *RIS-3279-TOM
4324 44 HI-VIS TROUSERS EN ISO 20471 CL.1
Scratch free High Visibility trousers with double cargo pockets. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 93 orange/navy, 94 yellow/navy 400, 441
High Visibility jacket with fleece lining 9028 included. Size: Colour: Quality:
*RIS-3279-TOM
XS-4XL 93 orange/navy, 94 yellow/navy 440, 400, 511
EN ISO 20471 CL.1
Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 93 orange/navy, 94 yellow/navy 441, 400, 310, 213
*RIS-3279-TOM
4380 44 HI-VIS STRETCH SHORTS EN ISO 20471 CL.1
High Visibility shorts with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
30”- 50”R 93 orange/navy, 94 yellow/navy 441, 400, 310
* For complete information regarding product certifications, visit tranemo.co.uk
EN ISO 20471 CL.1
30”- 50”R, 32”- 40”T, 28”- 48”S 93 orange/navy, 94 yellow/navy 400, 441, 310, 213
EN ISO 20471 CL.2 CL.1 (30”R-32”R 30”S-33”S)
Functional High Visibility tool vest in stretch with multiple pockets and belt loops in waist. Size: Colour: Quality:
XS-4XL 94 yellow/navy 441, 213
4351 44 HI-VIS CRAFTSMAN STRETCH TROUSERS
High Visibility trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.
High Visibility trousers with stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
EN ISO 20471 CL.2 CL.1 (XS-S)
4321 44 HI-VIS STRETCH TROUSERS
4320 44 HI-VIS STRETCH TROUSERS EN ISO 20471 CL.2 CL.1 (30”S)
4360 44 HI-VIS CRAFTSMAN STRETCH VEST
High Visibility trousers with nail pockets, kneepad pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 93 orange/navy, 94 yellow/navy 400, 441, 310, 213
4350 44 HI-VIS CRAFTSMAN STRETCH TROUSERS
High Visibility trousers with nail pocket, kneepad pockets and stretch for excellent fit and increased comfort ensuring full mobility at work. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 93 orange/navy, 94 yellow/navy 441, 400, 310, 213
4382 44 HI-VIS CRAFTSMAN STRETCH SHORTS EN ISO 20471 CL.1
High Visibility shorts with stretch for excellent fit and increased comfort ensuring full mobility at work. Nail pockets reinforced with HTPA. Size: Colour: Quality:
30”- 50”R 93 orange/navy, 94 yellow/navy 441, 400, 310, 213
VISION HV
4340 44 HI-VIS BIB ’N’ BRACE STRETCH
4341 44 HI-VIS CRAFTSMAN BIB ’N’ BRACE STRETCH
EN ISO 20471 CL.2
Advanced High Visibility Bib ’n’ brace with fluorescent stretch fabric in combination with zones in 4-way stretch where it is most needed.
EN ISO 20471 CL.2
*RIS-3279-TOM
Size: Colour: Quality:
*RIS-3279-TOM
30”- 50”R, 32”- 40”T, 34”- 48”S 93 orange/navy, 94 yellow/navy 441, 400, 310, 213
* For complete information regarding product certifications, visit tranemo.co.uk
Advanced High Visibility Craftsman Bib ’n’ brace with fluorescent stretch fabric in combination with zones in 4-way stretch where it is most needed. Nail pockets and Kneepad pockets in HTPA. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 93 orange/navy, 94 yellow/navy 441, 400, 310, 213
HIGH VISIBILITY
4310 44 HI-VIS BOILERSUIT
123
EN ISO 20471 CL.3
Durable High Visibility boilersuit with stretch fabric in the fluorescent parts.
*RIS-3279-TOM
Size: Colour: Quality:
XS-4XL 93 orange/navy, 94 yellow/navy 441, 400
124
HIGH VISIBILITY
SWEATSHIRTS & WAISTCOATS
SWEATSHIRTS & WAISTCOATS Our work sweatshirts and T-shirts are designed to offer a high level of comfort and practicality. The range includes soft-feel work sweatshirts, T-shirts and polo shirts in a comfortable cotton mix. To make sure you are seen in the work place, choose from our High Visibility sweatshirts, High Visibility T-shirts and High Visibility polo shirts that are all certified to EN ISO 20471.
SWEATSHIRTS & WAISTCOATS LADIES
NEW
EN ISO 20471 CL.3 CL.2* (S-L)
4336 26 HI-VIS LADIES CARDIGAN
High Visibility ladies cardigan in a soft sweatshirt fabric. PFAS-free. Size: Colour: Quality:
NEW
NEW
4384 26 HI-VIS LADIES HALF ZIP SWEATSHIRT EN ISO 20471 CL.3
Soft and comfortable High Visibility ladies sweatshirt with short zip in front. PFAS-free. Size: Colour: Quality:
Ladies S-XXL 55 yellow 264
EN ISO 20471 CL.3 CL.2* (S)
Ladies S-XXL 94 yellow/navy 264, 263
NEW
4387 11 HI-VIS LADIES LONG SLEEVES T-SHIRT
Soft and shape retaining High Visibility Ladies T-shirt with long sleeves and a cotton finish on the inside for greater comfort. PFAS-free. Size: Colour: Quality:
* For complete information regarding product certifications, visit tranemo.co.uk
Ladies S-XXL 55 yellow 113
4381 11 HI-VIS LADIES T-SHIRT *EN ISO 20471 CL.2 CL.1 (S-L)
Soft and shape retaining High Visibility ladies T-shirt in tricot with a cotton finish on the inside for comfort. PFAS-free. Size: Colour: Quality:
Ladies S-XXL 94 yellow/navy 113
SWEATSHIRTS & WAISTCOATS
EN ISO 20471 CL.3 CL.2* (XS-S)
Size: Colour: Quality:
EN ISO 20471 CL.2*
Soft and shape retaining High Visibility T-shirt with long sleeves in tricot and a cotton finish on the inside for comfort. PFAS-free. Size: Colour: Quality:
EN ISO 20471 CL.3
4374 26 HI-VIS HALF ZIP SWEATSHIRT
Soft and comfortable High Visibility sweatshirt with short zipped front. PFAS-free. Size: Colour: Quality:
EN ISO 20471 CL.3 CL.2* (XS-M)
EN ISO 20471 CL.3 CL.2* (XS)
XS-4XL 50 orange, 55 yellow 264
Size: Colour: Quality:
4378 11 HI-VIS POLO SHIRT
Soft and shape retaining High Visibility polo shirt in tricot with a cotton finish on the inside for comfort. PFAS-free. Size: Colour: Quality:
Soft and shape retaining High Visibility T-shirt with long sleeves and a cotton finish on the inside for greater comfort. PFAS-free.
*EN ISO 20471 CL.2 CL.1 (XS-S)
EN ISO 20471 CL.3 CL.2* (XS-M)
XS-4XL 55 yellow 113
* For complete information regarding product certifications, visit tranemo.co.uk
Size: Colour: Quality:
M-XXL 55 yellow 100% nylon
XS-4XL 93 orange/navy, 94 yellow/navy 113
4376 11 HI-VIS T-SHIRT
Soft and shape retaining High Visibility T-shirt with a cotton finish on the inside for greater comfort. PFAS-free. Size: Colour: Quality:
XS-4XL 50 orange, 55 yellow 113
Roomy High Visibility waistcoat with a short sleeve.
Soft and shape retaining High Visibility T-shirt in tricot with a cotton finish on the inside for comfort. PFAS-free. Size: Colour: Quality:
RS00 03 WAISTCOAT EN ISO 20471 CL.3
XS-4XL 93 orange/navy, 94 yellow/navy 264, 263
4371 11 HI-VIS T-SHIRT
XS-4XL 93 orange/navy, 94 yellow/navy 113
4377 11 HI-VIS LONG SLEEVES T-SHIRT
High Visibility sweatshirt with round neck in a soft sweatshirt fabric. PFAS-free. Size: Colour: Quality:
XS-4XL 93 orange/navy, 94 yellow/navy 264, 263
4372 11 HI-VIS LONG SLEEVES T-SHIRT EN ISO 20471 CL.2*
125
4375 26 HI-VIS SWEATSHIRT
4334 26 HI-VIS CARDIGAN
High Visibility cardigan in a soft sweatshirt fabric. PFAS-free.
HIGH VISIBILITY
XS-4XL 50 orange, 55 yellow 113
4620 51 HI-VIS WAISTCOAT EN ISO 20471 CL.2
High Visibility waistcoat with velcro closing. Size: Colour: Quality:
One size 50 orange, 55 yellow 100% polyester
126
COMFORT STRETCH
COMFORT STRETCH Comfort Stretch is a range designed for industries where trousers with added stretch are required. The trousers have stretch zones in 4-way stretch fabric with a lightweight and durable polyester / cotton base material. Stretch zones work perfectly in active work such as switching between standing and sitting, extended movement, etc. Comfort Stretch is a large range of work clothes, all designed to be as comfortable, flexible, and functional as possible. The collection is created to cope with hard work and with reinforced fabric on exposed areas, the garments have an extra-long lifespan. With a stylish design, comfortable material and stretch, Comfort Stretch are the work clothes you want to use during long working hours. Thanks to the stretch zones, the trousers have a nice and flexible fit that feels comfortable and offers excellent freedom of movement during the demanding working day. If you need extra visibility the trousers also are available with reflective stripes and fluorescent material. The trousers are available in both men’s and ladies’ sizes. Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk. 440: Fluorescent, 54% cotton / 46% polyester, twill with ripstop, 260 g/m² 500: Other colours, 65% polyester / 35% cotton, twill with comfort finish, 300 g/m²
c95mt
COMFORT STRETCH
127
ADVANCED STRETCH TROUSERS 1122 40
Extra durable fly construction meaning reduced strain on the seams. Stretch zone in the crotch for maximum mobility.
Kneepad pockets in HTPA Dobby.
Cargo pocket with flap, concealed keyring holder and strap for ID-pocket, mobile phone pocket with stretch zone.
Cargo pocket with multiple tool pockets and ruler pocket. Stretch on the bottom and on back of legs makes the trousers fit perfectly in physically active work and movement.
Reinforced back hem in HTPA Dobby with reflective detail.
Knee fabric with stretch zones in 4-way stretch.
The trousers are made of a lightweight and durable polyester/cotton fabric.
Adjustable foot width with plastic press studs.
128
COMFORT STRETCH VISIBLE
1922 40 ADVANCED STRETCH TROUSERS
6207 00 HOODED JACKET
Comfortable and heavy sweatshirt jacket with fleece on the inside and increased visibility. PFAS-free. Size: Colour: Quality:
XS-4XL 95 black/yellow 261, 480
6241 47 FUNCTIONAL FLEECE JACKET WITH DETACHABLE SLEEVES
Wind resistant fleece jacket with detachable sleeves, increased visibility and good breathability. Size: Colour: Quality:
XS-4XL 95 black/yellow 470, 480
1952 40 ADVANCED STRETCH TROUSERS
Advanced stretch trousers for craftsmen with increased visibility and many tool pockets for craftsmen who require high functionality. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility. Size: Colour: Quality:
Advanced craftsman stretch trousers with increased visibility, reinforced nail pockets and many tool pockets for craftsmen who require high functionality. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility.
30”- 50”R, 32”- 40”T, 28”- 48”S 95 black/yellow 400, 310, 213, 441
Size: Colour: Quality:
1921 40 STRETCH TROUSERS
1951 40 STRETCH TROUSERS
Trousers with increased visibility and stretch zones for perfect fit, high comfort and mobility. Size: Colour: Quality:
Craftsman Trousers with increased visibility and stretch zones for perfect fit, reinforced nail pockets and kneepad pockets in HTPA Dobby.
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy, 95 black/yellow 400, 310, 213, 441
Size: Colour: Quality:
1941 40 STRETCH BIB ’N’ BRACE
1949 40 STRETCH BIB ’N’ BRACE
Size: Colour: Quality:
Size: Colour: Quality:
Advanced Bib ’n’ brace with increased visibility, multiple pockets and 4-way stretch where it is most needed. 30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy, 95 black/yellow 440, 310, 213, 441
30”- 50”R, 32”- 40”T, 28”- 48”S 95 black/yellow 400, 310, 213, 441
30”- 50”R, 32”- 40”T, 28”- 48”S 94 yellow/navy, 95 black/yellow 400, 310, 213, 441
Advanced Bib ’n’ brace with increased visibility, reinforced nail pockets and 4-way stretch where it is most needed. 30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy, 95 black/yellow 400, 310, 213, 441
COMFORT STRETCH VISIBLE LADIES
1926 40 LADIES ADVANCED STRETCH TROUSERS
1956 40 LADIES ADVANCED STRETCH TROUSERS
Advanced ladies craftsman stretch trousers with increased visibility and many tool pockets for people who require high functionality. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility.
Advanced ladies craftsman stretch trousers with increased visibility, reinforced nail pockets and many tool pockets for people who require high functionality. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility.
Size: Colour: Quality:
Size: Colour: Quality:
Ladies 6-20 95 black/yellow 400, 310, 213, 441
1928 40 LADIES STRETCH TROUSERS
Ladies Trousers with increased visibility and stretch zones for perfect fit, high comfort and mobility. Size: Colour: Quality:
Ladies 6-20 94 yellow/navy, 95 black/yellow 400, 310, 213, 441
Ladies 6-20 95 black/yellow 400, 310, 213, 441
1958 40 LADIES STRETCH TROUSERS
Ladies Craftsman Trousers with increased visibility and stretch zones for perfect fit, reinforced nail pockets and kneepad pockets in HTPA Dobby. Size: Colour: Quality:
Ladies 6-20 94 yellow/navy, 95 black/yellow 400, 310, 213, 441
129
130
COMFORT STRETCH
1122 40 ADVANCED STRETCH TROUSERS
Advanced stretch trousers with many tool pockets for craftsmen who require high functionality. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 07 black 400, 310, 213
1121 40 STRETCH TROUSERS
Trousers with stretch zones for perfect fit, high comfort and mobility. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 03 navy, 07 black 400, 310, 213
1152 40 ADVANCED STRETCH TROUSERS
Advanced craftsman stretch trousers with reinforced nail pockets and many tool pockets for craftsmen who require high functionality. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility. Size: Colour: Quality:
1160 40 CRAFTSMAN WAISTCOAT
Multi-function tool vest with belt loops and nail pockets in the waist. Size: Colour: Quality:
XS-4XL 07 black 400, 213
30”- 50”R, 32”- 40”T, 28”- 48”S 07 black 400, 310, 213
1151 40 STRETCH TROUSERS
Craftsman Trousers with stretch zones for perfect fit, reinforced nail pockets and kneepad pockets in HTPA Dobby. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 28”- 48”S 03 navy, 07 black 400, 310, 213
1141 40 STRETCH BIB ’N’ BRACE
Advanced Bib ’n’ brace with multiple pockets and 4-way stretch where it is most needed. Size: Colour: Quality:
1191 40 ¾ LENGTH STRETCH TROUSERS
3/4 length Craftsman Trousers with stretch zones for perfect fit. Size: Colour: Quality:
30”- 50”R 03 navy, 07 black 400, 310, 213
1194 40 ¾ LENGTH CRAFTSMAN STRETCH TROUSERS
3/4 length Craftsman Trousers with stretch zones for perfect fit, reinforced nail pockets in HTPA Dobby. Size: Colour: Quality:
30”- 50”R 03 navy, 07 black 400, 310, 213
1181 40 STRETCH SHORTS
1182 40 CRAFTSMAN STRETCH SHORTS
Size: Colour: Quality:
Size: Colour: Quality:
Shorts with stretch zones for perfect fit, high comfort and mobility. 30”- 50”R 03 navy, 07 black 400, 310, 213
30”- 50”R, 32”- 40”T, 34”- 48”S 03 navy, 07 black 400, 310, 213
Shorts with nail pockets and stretch zones for perfect fit, high comfort and mobility. 30”- 50”R 03 navy, 07 black 400, 310, 213
1149 40 STRETCH BIB ’N’ BRACE
Advanced Bib ’n’ brace with reinforced nail pockets and 4-way stretch where it is most needed. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 03 navy, 07 black 400, 310, 213
COMFORT STRETCH LADIES
1128 40 LADIES STRETCH TROUSERS
Ladies Trousers with stretch zones for perfect fit, high comfort and mobility. Size: Colour: Quality:
Ladies 6-20 03 navy, 07 black 400, 310, 213
1126 40 ADVANCED LADIES STRETCH TROUSERS
Advanced ladies craftsman stretch trousers with many tool pockets for people who require high functionality. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility. Size: Colour: Quality:
Ladies 6-20 07 black 400, 310, 213
1127 40 MATERNITY STRETCH TROUSERS
1158 40 LADIES ADVANCED STRETCH TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Maternity trousers with knitted fabric and buttonhole elastic at the top allowing for different stages of pregnancy. The trousers have specific stretch areas and a wide elastic band in the back. Ladies 6-20 03 navy, 07 black 400, 310, 213, 050
1156 40 LADIES ADVANCED STRETCH TROUSERS
Advanced ladies craftsman stretch trousers with reinforced nail pockets and many tool pockets for people who require high functionality. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility. Size: Colour: Quality:
Ladies 6-20 07 black 400, 310, 213
1198 40 LADIES ¾ LENGTH STRETCH TROUSERS
1196 40 LADIES ¾ LENGTH CRAFTSMAN STRETCH TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
3/4 ladies length craftsman Trousers with stretch zones for perfect fit. Ladies 6-20 03 navy, 07 black 400, 310, 213
3/4 ladies length craftsman Trousers with stretch zones for perfect fit, reinforced nail pockets in HTPA Dobby. Ladies 6-20 03 navy, 07 black 400, 310, 213
1187 40 LADIES STRETCH SHORTS
1188 40 LADIES CRAFTSMAN STRETCH SHORTS
Size: Colour: Quality:
Size: Colour: Quality:
Shorts with stretch zones for perfect fit, high comfort and mobility. Ladies 6-20 03 navy, 07 black 400, 310, 213
Ladies shorts with nail pockets and stretch zones for perfect fit, high comfort and mobility. Ladies 6-20 03 navy, 07 black 400, 310, 213
131
Advanced ladies craftsman stretch trousers with many pockets for tools. The trousers have outside kneepad pockets in HTPA Dobby and 4-way stretch zones for perfect fit, high comfort and mobility. Ladies 6-20 03 navy, 07 black 400, 310, 213
O
R
T
ST
RIC
T LEGISL
AT
IO
N
PF
SU
TO
PP
COMFORT LIGHT
CO
O
C
’S
V
SE
COMFORT LIGHT
EM
EM
EN
CH
T
AS
WE
132
RP
O R AT E PF
AS
A classic collection in strong 245 g/m² polyester/cotton that makes this range extremely tough and durable, yet very comfortable to wear. This range is ideally suited for the service and industrial markets. Comfort Light is particularly suitable for those who work in manufacturing and the automotive industry or have a job where you work with or near delicate surfaces. With plastic zips and hidden buttons on garments, the majority are designed to precisely minimise the risks of scratching fragile surfaces. The clothes have a modern fit and the quality means they hold up well in industrial washing. Comfort Light is the collection of comfortable, light and durable workwear.
Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk. 400: 65% polyester / 35% cotton, 245 g/m²
c95mt
1129 40 LADIES SERVICE AND INDUSTRY TROUSERS
1120 40 SERVICE AND INDUSTRY TROUSERS
Lightweight and durable ladies service/industry trousers with an updated fit. PFAS-free.
Lightweight and durable service/industry trousers with an updated fit. PFAS-free.
Size: Colour: Quality:
Size: Colour: Quality:
Ladies 6-20 03 navy, 07 black 400
1189 40 LADIES SHORTS
1180 40 SHORTS
Size: Colour: Quality:
Size: Colour: Quality:
Lightweight and durable ladies Shorts for warehouse and service work. PFAS-free. Ladies 6-20 03 navy, 07 black 400
30”- 50”R, 32”- 40”T, 28”- 48”S 03 navy, 07 black 400
1131 40 WAREHOUSE COAT
Warehouse coat in a lightweight but durable polyester/cotton twill. PFAS-free. Size: Colour: Quality:
XS-3XL 03 navy 400
Lightweight and durable Shorts for warehouse and service work. PFAS-free. 30”- 50”R 03 navy, 07 black 400
1110 40 BOILERSUIT
Scratch free boilersuit in a lightweight but durable polyester/cotton twill. PFAS-free. Size: Colour: Quality:
XS-4XL 03 navy, 07 black 400
M
ORIGINAL COTTON
ORIGINAL COTTON ORIGINAL COTTON is suitable for a wide range of industries and workplace environments. It is made from 100% cotton with a smart design and functionality and hidden button closures.
Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk. 131: 100% cotton-twill, 325 g/m²
c95mt
2531 13 JACKET
Jacket in 100% cotton for industrial use. PFASfree. Size: Colour: Quality:
2521 13 TROUSERS
Trousers with kneepad pockets in 100% cotton for industrial use. PFAS-free. Size: Colour: Quality:
XS-4XL 03 navy 131
2050 13 CRAFTSMAN TROUSERS
Painter and bricklayer trousers in cotton twill with a wide fit, nail pockets and kneepad pockets in HTPA.
30”- 50”R, 32”- 40”T, 34”- 48”S 03 navy 131
Size: Colour: Quality:
2511 13 BOILERSUIT
2541 13 BIB ‘N’ BRACE
Size: Colour: Quality:
Size: Colour: Quality:
Boilersuit with kneepad pockets in 100% cotton for industrial use. PFAS-free. XS-4XL 03 navy 131
30”- 50”R, 32”- 40”T, 34”- 48”S 04 white 131
Bib ’n’ brace with kneepad pockets in 100% cotton. PFAS-free. 30”- 50”R, 32”- 40”T, 34”- 48”S 03 navy 131
133
134
CRAFTSMAN PRO VISIBLE
CRAFTSMAN PRO Range in 100% cotton for craftsman, industry and workshops. Craftsman Pro cotton range has many features and a nice fit so that the user can move freely and comfortably while working. Craftsman, industrial and workplace workwear is always required to be hard wearing, therefore most of the garments in the range are equipped with reinforcements in HTPA Dobby. The reinforcements are placed on exposed areas such as at the knee, hem and in the nail pockets. The entire collection is prewashed to minimise shrinkage and increase comfort.
Standard quality and washing instruction for the range: The garments in the range may consist of more and/or other qualities. See quality specification for each product or visit tranemo.co.uk. 150: 100% cotton-twill, 375 g/m² 441: Fluorescent, 74% polyester / 24% cotton / 2% elastic fibre, 245 g/m², EN ISO 20471
c95mt
CRAFTSMAN PRO VISIBLE LADIES
7728 15 LADIES WORK JEANS
Smart ladies worker jeans with increased visibility in a durable and heavyweight cotton twill and inside kneepad pockets. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy, 95 black/yellow 150, 441
7758 15 LADIES CRAFTSMAN TROUSERS
Functional ladies craftsman trousers with increased visibility in a durable and heavyweight cotton twill with a wide fit. Reinforced nail pockets and kneepad pockets in HTPA Dobby. Size: Colour: Quality:
Ladies 8-20 94 yellow/navy, 95 black/yellow 150, 213, 441
CRAFTSMAN PRO VISIBLE
6207 00 HOODED JACKET
Comfortable and heavy sweatshirt jacket with fleece on the inside and increased visibility. PFAS-free. Size: Colour: Quality:
XS-4XL 95 black/yellow 261, 480
7725 15 WORK JEANS
Smart worker jeans with increased visibility in a durable and heavyweight cotton twill and inside kneepad pockets. Size: Colour: Quality:
7712 15 BOILERSUIT
Boilersuit with increased visibility and kneepad pockets in a durable and heavyweight cotton twill. Size: Colour: Quality:
XS-3XL 94 yellow/navy 150, 441
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy, 95 black/yellow 150, 441
7745 15 BIB ’N’ BRACE
Functional bib ’n’ brace with increased visibility in a durable and heavyweight cotton twill. Reinforced kneepad pockets in HTPA Dobby. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy, 95 black/yellow 150, 213, 441
6241 47 FUNCTIONAL FLEECE JACKET WITH DETACHABLE SLEEVES
Wind resistant fleece jacket with detachable sleeves, increased visibility and good breathability. Size: Colour: Quality:
XS-4XL 95 black/yellow 470, 480
7755 15 CRAFTSMAN TROUSERS
Functional craftsman trousers with increased visibility in a durable and heavyweight cotton twill with a wide fit. Reinforced nail pockets and kneepad pockets in HTPA Dobby. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 94 yellow/navy, 95 black/yellow 150, 213, 441
7747 15 BIB ’N’ BRACE
Functional craftsman bib ’n’ brace with increased visibility in a durable and heavyweight cotton twill. Extra reinforced nail pockets and kneepad pockets in HTPA Dobby. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 34”- 48”S 94 yellow/navy, 95 black/yellow 150, 213, 441
135
136
CRAFTSMAN PRO VISIBLE
CRAFTSMAN PRO LADIES
7729 15 LADIES WORK JEANS
Smart ladies worker jeans in a durable and heavyweight cotton twill and inside kneepad pockets. Size: Colour: Quality:
Ladies 8-20 07 black, 32 navy 150
7759 15 LADIES CRAFTSMAN TROUSERS
7799 15 ¾ LENGTH CRAFTSMAN LADIES TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Functional ladies craftsman trousers in a durable and heavyweight cotton twill with a wide fit. Reinforced nail pockets and kneepad pockets in HTPA Dobby. Ladies 8-20 07 black, 32 navy 150, 213
3/4 length craftsman ladies trousers in a durable and heavyweight cotton twill with a wide fit. Reinforced nail pockets and kneepad pockets in HTPA Dobby. Ladies 8-20 07 black, 32 navy 150, 213
CRAFTSMAN PRO
7732 15 JACKET
Unlined jacket in a durable and heavyweight cotton twill with reflective details. Size: Colour: Quality:
XS-4XL 07 black, 32 navy 150
7791 15 ¾ LENGTH CRAFTSMAN TROUSERS
3/4 length craftsman trousers in a durable and heavyweight cotton twill with a wide fit. Reinforced nail pockets and kneepad pockets in HTPA Dobby. Size: Colour: Quality:
30”- 50”R 07 black, 32 navy 150, 213
7720 15 WORK JEANS
Smart worker jeans in a durable and heavyweight cotton twill and inside kneepad pockets. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 07 black, 32 navy 150
7780 15 SHORTS
Functional shorts in a durable and heavyweight cotton twill. Size: Colour: Quality:
30”- 50”R 07 black, 32 navy 150
7741 15 BIB ’N’ BRACE
7748 15 BIB ’N’ BRACE
Size: Colour: Quality:
Size: Colour: Quality:
Functional bib ’n’ brace in a durable and heavyweight cotton twill. Reinforced kneepad pockets in HTPA Dobby. 30”- 50”R, 32”- 40”T, 34”- 48”S 07 black, 32 navy 150, 213
Functional craftsman bib ’n’ brace in a durable and heavyweight cotton twill. Reinforced nail pockets and kneepad pockets in HTPA Dobby. 30”- 50”R, 32”- 40”T, 34”- 48”S 07 black, 32 navy 150, 213
137
7751 15 CRAFTSMAN TROUSERS
Functional craftsman trousers in a durable and heavyweight cotton twill with a wide fit. Reinforced nail pockets and kneepad pockets in HTPA Dobby. Size: Colour: Quality:
30”- 50”R, 32”- 40”T, 30”- 48”S 07 black, 32 navy 150, 213
7788 15 WORK SHORTS
Functional craftsman shorts in a durable and heavyweight cotton twill. Extra reinforced nail pockets in HTPA Dobby. Size: Colour: Quality:
30”- 50”R 07 black, 32 navy 150, 213
7710 15 BOILERSUIT
Boilersuit in a durable and heavyweight cotton twill. Size: Colour: Quality:
XS-4XL 32 navy 150
O
R
T
ST
RIC
T LEGISL
AT
IO
N
PF
SU
TO
PP
OUTERWEAR
CO
O
C
’S
V
SE
EM
EM
EN
CH
T
AS
WE
138
RP
O R AT E PF
AS
M
OUTERWEAR Tranemo has many different types of outer garments enabling the user to wear garments according to the layer-on-layer principle for the best and most lightweight protection. The winter range offers a comprehensive selection of garments for all climates that can be used both outdoors and also in cold indoor environments. In the range you can find shell garments, warm lined winter garments, softshell and fleece jackets. The PFAS-free shell garments with taped seams are designed to offer maximum comfort. Wear them together as a system and supplement these garments with our recommended underwear to create a certified system approved for EN 342 and EN 343. This will ensure that you stay warm and dry whilst wearing the garments. Fleece and softshell jackets are made in different fabric qualities to suit different kinds of work. Use them either as an outer garment or as a warming and insulating middle layer.
OUTERWEAR
6235 46 FUNCTIONAL PARKA EN 343 4.2
PFAS-free parka with taped seams and detachable fleece lining. Wind and waterproof according to EN 343. Outer fabric EN 343 4:4. Size: Colour: Quality:
XS-4XL 03 navy, 07 black 466, 002, 510, 003
6200 46 WINTER JACKET
*EN 342 (6200+6226)
Size: Colour: Quality:
6207 00 HOODED JACKET
Wind resistant fleece jacket with detachable sleeves, increased visibility and good breathability.
Comfortable and heavy sweatshirt jacket with fleece on the inside and increased visibility. PFAS-free.
Size: Colour: Quality:
Size: Colour: Quality:
6210 46 WINTER BOILERSUIT EN 343 3.1 *EN 342
PFAS-free, quilted winter boilersuit with taped seams and increased visibility. Wind and waterproof according to EN 343. Size: Colour: Quality:
XS-4XL 95 black/yellow 466, 213, 003
* For complete information regarding product certifications, visit tranemo.co.uk
Classic pilot jacket with detachable sleeves in wind and water resistant beaver nylon. Size: Colour: Quality:
XS-4XL 07 black 466, 003, 008
6241 47 FUNCTIONAL FLEECE JACKET WITH DETACHABLE SLEEVES XS-4XL 95 black/yellow 470, 480
6520 30 PILOT JACKET
PFAS-free, lined winter jacket with taped seams and reflective details. Wind and waterproof according to EN 343. Outer fabric EN 343 4:4.
EN 343 4.1
*EN 342 (6200+6226)
XS-4XL 03 navy, 07 black, 73 royal/navy 303, 460, 009
RH00 34 FLEECE JACKET
Soft, close-knit fleece jacket with high quality for active use. Size: Colour: Quality:
XS-4XL 95 black/yellow 261, 480
EN 343 4.4
139
XS-4XL 03 navy, 07 black 100% polyester, 270 g/m²
6226 46 SHELL TROUSERS
PFAS-free shell trousers with taped seams and mesh lining. Wind and waterproof according to EN 343. Outer fabric EN 343 4:4. Size: Colour: Quality:
XS-4XL 07 black 466, 213, 007, 002
140
BASE LAYER & SHIRTS
BASE LAYER The underwear ranges suit workers in colder climates, both indoors or outdoors. If extra protection against the cold is required, we recommend our thermo garments as an extra insulating layer.
6930 51 THERMO JACKET
6920 51 THERMO TROUSERS
Size: Colour: Quality:
Size: Colour: Quality:
Double quilted thermo jacket to be used as an insulating midlayer. PFAS-free.
6975 42 LONG SLEEVES T-SHIRT
6979 42 TURTLENECK
Size: Colour: Quality:
Size: Colour: Quality:
Long sleeved T-shirt with a 3-function fabric. PFAS-free. XXS-4XL 07 black 428
XS-4XL 07 black 515
Turtleneck underwear in a 3-function fabric. PFAS-free. XXS-4XL 07 black 428
Double quilted thermo trousers to be used as an insulating midlayer. PFAS-free. XS-4XL 07 black 515
6972 42 LONG JOHNS
Long Johns in a 3-function fabric. PFAS-free. Size: Colour: Quality:
XXS-4XL 07 black 428
SHIRTS Here you can see work shirts in a soft cotton mix and choice of designs and colours that will make your working day more comfortable.
8131 22 LONG SLEEVES SHIRT
8141 22 SHORT SLEEVES SHIRT
Size: Colour: Quality:
Size: Colour: Quality:
Long sleeved shirt in thin cotton/polyester twill. PFAS-free. XS-4XL 03 navy, 07 black 221
Short sleeved shirt in thin cotton/polyester twill. PFAS-free. XS-4XL 03 navy, 07 black 221
SWEATSHIRTS & T-SHIRTS
141
SWEATSHIRTS & T-SHIRTS
RH00 23 FULL ZIP SWEATSHIRT
RH00 22 SWEATSHIRT
Size: Colour: Quality:
Size: Colour: Quality:
Full zip sweatshirt with contrast colour on sleeves, collar and back of shoulders. XS-3XL 95 black/yellow 65% polyester / 35% cotton, 300 g/m²
RH00 26 LONG SLEEVES T-SHIRT
Extra durable T-shirt with long sleeves. Size: Colour: Quality:
S-4XL 03 navy, 07 black 50% cotton / 50% polyester, 215 g/m²
RH00 12 SWEATSHIRT
Extra durable sweatshirt. Classic model with round neck. Size: Colour: Quality:
XS-4XL 03 navy, 07 black 60% cotton / 40% polyester, 290 g/m²
Sweatshirt with contrast colour on back of shoulder and sleeves. XS-3XL 95 black/yellow 65% polyester / 35% cotton, 160 g/m²
T-shirt with raglan sleeves in contrast colour. Size: Colour: Quality:
XS-3XL 95 black/yellow 65% polyester / 35% cotton, 160 g/m²
RH00 30 LADIES T-SHIRT
RH00 27 T-SHIRT
Classic T-shirt with round neck. Size: Colour: Quality:
RH00 21 T-SHIRT
S-4XL 03 navy, 04 white, 07 black, 67 anthracite 100% cotton, 175 g/m²
Ladies T-shirt with round narrow neck ribbing and side slit. Size: Colour: Quality:
Ladies S-XXL 03 navy, 04 white, 07 black 100% cotton, 175 g/m²
RH00 33 SWEATSHIRT WITH COLLAR
RH00 05 POLOSHIRT
Sweatshirt with polo collar and three buttons. Soft, brushed inside.
Extra durable and classic polo shirt with chest pocket.
Size: Colour: Quality:
Size: Colour: Quality:
S-4XL 03 navy, 07 black 70% cotton / 25% polyester / 5% viscose, 290 g/m²
XS-4XL 03 navy, 07 black 50% cotton / 50% polyester, 215 g/m²
142
ACCESSORIES
ACCESSORIES
9190 00 BACKPACK / BAG
Backpack/bag in Tranemo design with a large zip opening. The bag can either be carried on the back with solid, padded and adjustable shoulder straps or with the carrying handles.
Practical accessories for Tranemo’s work clothing.
9120 00 KNEEPADS EN 14404 Type 2 Level 1
The kneepads can be used both with Flame Retardant workwear and regular workwear and meets the requirements of EN ISO 11612:2015 limited flame spread A1. Size: Colour: Quality:
One size 00 multi-colour 100% Ethylene Vinyl Acetate, Shell: Fawolon
9020 00 KNEEPADS
Standard kneepads Size: Colour: Quality:
One size 06 grey 100% EVA, EN ISO 11612 A1
Size: Colour:
9019 00 ID-POCKET
Identity card pocket fits on keyring holder with button closing. Size: Colour: Quality:
9144 00 KNEEPADS
One size 07 black 100% polyester
Standard kneepads. Delivered in retail packaging in pairs. Size: Colour: Quality:
One size 07 black
One size 06 grey 100% EVA, EN ISO 11612 A1
Soft and warming fleece lining without sleeves. To be attached with press studs in jackets 4308 and 4330. PFAS-free. Size: Colour: Quality:
9032 00 KNEEPADS
Extra heavy duty kneepads. Size: Colour: Quality:
9028 51 FLEECE LINING
One size 07 black Neoprene, EN ISO 11612 A1
S, L, XXL 06 grey 100% polyester fleece, 280 g/m²
9145 00 KNEEPADS
Extra heavy duty kneepads. Delivered in retail packaging in pairs. Size: Colour: Quality:
One size 07 black Neoprene, EN ISO 11612 A1
ACCESSORIES
9048 00 PILOT CAP
Pilot cap with quilted lining and fibre fur. PFASfree. Size: Colour: Quality:
M (57/58 cm), L (60/61 cm) 55 yellow 466, 003, 008
9013 00 LEATHER BELT
One size 07 black Leather
9046 00 BELT
Cap with TRANEMO logo.
Size: Colour: Quality:
Size: Colour: Quality:
One size 03 navy, 07 black 95% cotton / 5% elastane Lining, 100% polyester
One size 07 black 100% nylon
Elastic belt with embossed Tranemo logo.
Elastic belt with velcro closing.
Size: Colour: Quality:
Size: Colour: Quality:
One size 07 black 68% polypropylene / 32% elastane
S-XXL 07 black polyester / elastane
9016 00 HAMMER HOLDER
Elastic braces with Tranemo logo.
Hammer holder in black plastic laminated metal.
Size: Colour: Quality:
Size: Colour: Quality:
9011 00 SOCKS
Socks with Tranemo logo. PFAS-free. Size: Colour: Quality:
One size 07 black 100% cotton
9037 00 ELASTIC BELT
9027 00 BRACES
Nylon belt with plastic buckle. Size: Colour: Quality:
Tricot beanie with fleece lining.
9029 52 BELT
High quality black leather belt. Size: Colour: Quality:
9124 00 CAP
9068 00 BEANIE
37-39, 40-42, 43-45, 46-48 07 black 80% cotton / 18% polyamide / 2% elastane
One size 07 black polyester / elastane
One size 07 black Metal
9041 00 SOCKS
Wool mix socks with Tranemo logo. PFAS-free. Size: Colour: Quality:
37-39, 40-42, 43-45, 46-48 07 black 50% acrylic / 30% wool / 18% polyamide / 2% elastane
143
144
ON DEMAND
With special orders you can further enhance your identity or refine your purchased stock items. Please contact customer service so that we can help you find the right On Demand products.
INCREASED VISIBILITY
FR LEG PROTECTION
Sew on fluorescent fabric and reflective stripes on unlined garments.
Sew on Flame Retardant leg protection in heavy Aramid. The protection provides a very good protection against splashes of molten metal and heat which considerably extends the life of the trousers. Ideal for welding or when cutting metal. The protection also covers a part of the foot and is available in two sizes. It is not possible to sew additional leg protection onto all trousers. Please contact Tranemo for further information.
D05A44 Stripe around sleeves D05B44 Stripe around legs The stripe can be sewn on around legs or sleeves and is available in colour: 50 Hi-Vis orange, 55 Hi-Vis yellow. 25 mm 50 mm 25 mm
High leg strengthening, 63 cm 90368067 - 803 Barricader EP Low leg strengthening, 31 cm 90398067 - 803 Barricader EP
REFLECTIVE Placering byxa: STRIPES 10-12cm från fåll.
Sew on reflective stripes on unlined garments. The reflective stripes can be sewn on around sleeves, legs and on the back. 50 mm reflective stripes D06A5006 around sleeves D06B5006 around legs D06R5006 on the back 50 mm Flame Retardant reflective stripes D07A5006 around sleeves D07B5006 around legs D07R5006 on the back 20 mm reflective stripes D06A2006 around sleeves D06B2006 around legs D06R2006 on the back
KNEEPAD POCKETS Sew on kneepad pockets on unlined garments. The kneepad pockets are available in different qualities and colours. 9021 Kneepad pockets Quality 213: 03 navy, 07 black Quality 400: 03 navy, 07 black Quality 873: 03 navy
ANKLE ADJUSTMENT Press studs can be added to adjust the ankle width on unlined garments. D06100 Button adjustment
IDENTITY POCKET Sew on identity pockets on unlined garments. D06800 Identity pocket
BADGES Sew on badges. D067 Sew on badge
RUBBER STRENGTHENING Rubber strengthening of existing kneepad pockets for extra strong durability. D01100 Rubber strengthening
VELCRO Sewing on black velcro (soft part) for use of a name badge. D0690007 Sewing on velcro 005 - 10 cm x 2 cm 006 - 11 cm x 2 cm 007 - 12 cm x 2 cm
LEG LENGTH ADAPTION
MATERNITY TROUSERS
If you need help adjusting the leg length, we can shorten (D02200) and lengthen (D02300) unlined garments.
D07800 - Sewn in soft rib over the stomach area with adjustable elasticated upper and elasticated waist at back. Can be added to most Tranemo trousers without tool pockets.
145
HEATSEAL BADGES When ordering a heatseal badge, the cost is made up of two charges. The first charge is for making the heatseal badge and the second charge for applying the heatseal badge to the garment. The heatseal badges are charged on the first order and the price varies depending on size of the badge, how many colours are being used and quantity being ordered. Minimum order quantity for 1-3 colours is 25 pcs and then in multiples of 25. Minimum order quantity for more than 3 colours is 100 pieces. Tranemo has 13 standard colours to choose from. If there is a requirement for a specific PMS colour, there is an additional cost for ordering the special colour. InduTrans - This is an all-round heatseal badge that works on most materials. Covers dark garments to 99% and can be washed in 60 degrees and tumble dried in low temperatures (garment washed and dried inside out). InduTrans is tested and complies to the requirements for EN ISO 14116 and 1149-5 when applied to most Tranemo Flame Retardant fabrics. Artwork - originating cost - To ensure the best quality, please supply us with a digital eps file, with text outlines. If the original is not in an acceptable file format, there will be a cost for re-designing. Applying instructions - InduTrans heatseal badges should be applied by a heatseal machine for 8-12 seconds at 160°C. The surface of the material should be flat and without seams. For Flame Retardant garments, the best placement is where there are several layers of fabric underneath - this will help protect the wearer against extra heat that a heatseal badge may retain during use. Water resistant garments can be preheated to get a better finish. Location of heatseal badges, max 100 cm². Depending on the shape of the heatseal badge and the design of a garment, it may be that it is not possible or suitable to apply the heatseal to some areas of the garment. B4 B23 B4
B5 B5
B6 B2 B22 B2
B3 B23
B1 B22
B3 B21
B1 B20
B21
B20
B32
B6
B8
B10
B8
B10
B9
B7
B11
B9
B7
B11
B32
B31
B30
B16
B17
B16
B17
B24
B25
B24
B25
B28
B29 B15
B28 B14
B15
B14
Black PMS Black C
B30 B31
B29
Standard colour:
Dark grey PMS 431 C
Light grey PMS Cool Grey 4C
B26
B27
B26 B12
B27 B13
B12
B13
White PMS White
Yellow PMS Yellow C B18
B19
B18
B19
Orange PMS 165 C
Location of heatseal badges, max 500 cm². Depending on the shape of the heatseal badge and the design of a garment, it may be that it is not possible or suitable to apply the heatseal to some areas of the garment.
Red PMS 1797 C
Dark red R1
R3
R5 R5
R6 R6
R2
R4
R2
PMS 201 C
R14 R14
R3 R13 R13
R1
Green PMS 348 C
R4
Dark green PMS 3425 C
Light blue PMS 2925 C
Royal blue R12 R12
R11 R11
PMS 286 C
Navy R10 R10
R9 R9
R8 R8
R7 R7
PMS 289 C
146
CARE It is essential that all Flame Retardant garments are washed in a professional manner in accordance with specific washing instructions to ensure that the features and benefits are not compromised or lost. Only synthetic detergents should be used. Do not use soap detergent or softeners and garments should not be bleached. Tranemo recommends: • Protective clothing certified according to EN ISO 20471 must be washed separately or alternatively together with other garments certified according to EN ISO 20471. • For garments that contain wool, proper care is very important. Wool is sensitive to high pH levels and should therefore be washed in a neutral pH gentle wash process. Protective clothing containing wool should also be washed on a special wool program. Contact Tranemo for full information on washing procedures and detailed care instructions.
Impregnation/finish & re-impregnation In order to meet the requirements of EN 13034 and maintain chemical protection, protective clothing needs to be re-impregnated if necessary. Protective clothing should be washed in industrial laundries, which are able to carry out the re-impregnation correctly and in an environmentally friendly way. Tranemo has carried out several tests at an accredited institute, which proves that a fabric certified for EN 13034 (acid and alkaline) and an impregnation containing PFAS, can advantageously be re-impregnated with a PFAS-free finish and still achieve the same result. Note that the markings on the garments must only be for acid and base in order for the change to be approved. If you are unsure about the handling, contact us and we will help you.
Washing symbols
a B C D T
Wash at max 40°C
Wash at max 40°C, gentle wash
Wash at max 60°C
Wash at max 60°C, gentle wash
Do not dry clean
3 5 O N M
Do not tumble dry
Tumble dry low temperature
Do not iron
Ironing max 110°C
Ironing max 150°C
Heat sealed reflective stripes Stitched on reflective stripes can feel hard, stiff and give an uncomfortable feel to knitwear that is often soft and elastic. The use of segmented heat sealed reflective stripes makes the garments more compliant compared to ordinary stitch-on reflective stripes. Even on some lighter garments in woven fabrics, heat sealed reflective stripes have a strong advantage in terms of comfort. To maintain reflection, the heat sealed reflective stripes should be washed at a neutral pH (i.e. do not use detergents with pH above 8). Tranemo recommends: • Washing at maximum 60°C • Avoid alkaline detergents, pH<8 is recommended. • Do not use softener, bleaching agents or optical whiteners. • We recommend hang drying or tumble dry at max 60°C. For tunnel drying, maximum 100°C is recommended.
147
Repairing a Flame Retardant garment Do not use damaged Protective Clothing that cannot be repaired (i.e. holes or tears in the garment, closure not functioning properly). Small damage that does not affect the garments overall protection can be repaired, prolonging the lifetime of a garment by repairing it will also reduce our environmental impact. Repairs should not impair the performance of the Protective Clothing and any repairs should only be done in accordance with Tranemo repair instructions and using identical fabrics and components. If needed, Tranemo can provide a repair kit as an optional product and provide guideline repair instructions.
Exchange - Disposal When a garment has been in direct contact with flame or strong heat, it may be brittle and weakened and should therefore be disposed of. If the garment has been exposed to chemicals which have penetrated the fabric, this will normally mean a degradation of the protection and it should be taken into consideration whether the garment should be discarded and replaced.
Heat seal badges and embroidery on PPE Clothing Heat seal badges need to be tested and approved before they are used on Flame Retardant garments. The heat seal badges that Tranemo produce are tested and approved for EN ISO 14116 and EN 1149-5 when attached to a Tranemo Flame Retardant garment. When a heat seal badge is exposed to high heat, it normally retains the energy for a longer period of time than the fabric. From a safety perspective, a large solid print is not recommended. The best placement is where there are several layers of fabric underneath that will help protect your skin. Badges attached to a Flame Retardant garment should be made from Flame Retardant fabric. For EN 1149-5 garments, badges should be permanently attached. This should be done in such a way that separation between the badge and the clothing material is avoided. If embroidery is applied directly to a Flame Retardant garment, it should be made from Flame Retardant thread. Incorrect embroidery, badge or heat seal badges attached to an FR garment can have a negative effect on the FR properties. Heat seal badges, badges and labels that are smaller than 10 cm² do not need to be flame tested according to the standard EN ISO 14116.
Standard
Heat seal badges
Embroidery
Badges
EN ISO 11612 IEC 61482-2 EN 61482-2 EN ISO 11611 EN 13034 Type PB [6]
Heat seal badges must be approved according to EN ISO 14116 Index 3.
Embroidery thread must be approved according to EN ISO 14116 Index 3.
Badge fabric must be approved according to EN ISO 14116 Index 3.
Preferably applied where there are several layers of fabric underneath. Avoid covering large areas of the fabric.
Preferably applied where there are several layers of fabric underneath.
EN 1149-5
Heat seal badges greater in width than 5 cm and bigger than 100 cm² and thickness more than 2 mm must be tested according to EN 1149-5.
Embroideries greater in width than 5 cm and bigger than 100 cm² and thickness more than 2 mm must be tested according to EN 1149-5.
Badges greater in width than 5 cm and bigger than 100 cm² and thickness more than 2 mm must be tested according to EN 1149-5 and permanently attached.
EN ISO 20471
Maximum size depends on size of garment and high visibility area.
Maximum size depends on size of garment and high visibility area.
Maximum size depends on size of garment and high visibility area.
Applying a logo on high visibility garments In order for a garment certified according to EN ISO 20471 to still meet the minimum fluorescent surface area requirement of the standard after applying a logo, care should be taken to ensure the logo should neither be too large or placed on the fluorescent surface so as to compromise the minimum required fluorescent surface area. Therefore, trousers should not have logos applied to the fluorescent surface area. The same recommendation applies to upper parts certified according to EN ISO 20471 class 3 with relatively small fluorescent surface area ( e.g. short-sleeved garments, ladies garments or garments with contrast fabric). Please ask Tranemo for the high visibility details / area on each garment to know any limitation.
148
QUALITY AND FABRIC THE IMPORTANCE OF QUALITY CONTROL Our aim is to ensure that the garments we manufacture meet the needs and expectations of our customers. In order to achieve this, we place great importance ensuring the highest quality of the fabrics and components that make up our garments. The quality control process covers all stages of manufacturing – from product development through to finished garments. This ensures that Tranemo garments offer the very best in workplace protection, performance, comfort and will meet the demands of today’s varied working environments. Before a finished garment can be approved, it must pass the following quality control processes: • •
• •
Before production begins, all materials, fabric and components are fully inspected and approved. All fabrics and reflective materials are tested in our own test house. The different characteristics are tested depending on how the garment will be used and what performance and protection it needs to give. Important parameters are shrinkage, tear strength, colour fastness, pilling and combustibility. Certification of products and fabrics are made after extensive testing in our external certified test houses. The quality control process also includes areas such as delivery and stock control of finished garments.
FABRIC INFORMATION The table contains descriptions of all fabric in the catalogue. The column to the left contains the fabric number which is also stated in the product text. Column two contains the composition, weight and other properties. If the fabric is certified the EN standards are noted. No. Fabric description 002 Lining, 100% polyester, 70 g/m². PFAS-free. 003 100% polyester quilt with polyester wadding, 80 g/m². PFAS-free. 004 100% polyester quilt with polyester wadding, 110 g/m². PFAS-free. 007 100% polyester mesh. PFAS-free. 008 100% polyester pile, 360 g/m². PFAS-free. 009 100% polyester pile, 540 g/m². PFAS-free. 050 Cantex Heavy Rib - 58% modacrylic / 36% cotton / 4% elastic fibre / 2% antistatic, 300 g/m² Inherent Flame Retardant tricot. PFAS-free. EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-1-1:2019, ELIM: 5,1 cal/cm², EBT: 6,3 cal/cm² EN 1149-3 051 Cantex Light Rib – 56% modacrylic / 37% cotton / 5% elastic fibre / 2% antistatic, 230 g/m² Inherent Flame Retardant tricot. PFAS-free. EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-1-1:2019, ELIM: 5,1 cal/cm², EBT: 6,3 cal/cm² EN 1149-3 054 Quilt FR - 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 160 g/m² with polyester wadding, 80 g/m² Inherent Flame Retardant fabric with Flame Retardant polyester wadding. PFAS-free. 055 Quilt FR - 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 160 g/m² with polyester wadding, 120 g/m² Inherent Flame Retardant fabric with Flame Retardant polyester wadding. PFAS-free. 060 Pile FR - 87% modacrylic / 13% cotton, 320 g/m² Inherent Flame Retardant pile. PFAS-free. EN ISO 14116 index 3 113 55% polyester / 45% cotton, 200 g/m² Pique. Pleasant, shape retaining interlock with cotton lining. PFAS-free. EN ISO 20471 for fluorescent colours RIS-3279-TOM fluorescent orange certified for UK railways
No. Fabric description 131 100% cotton, 325 g/m² Comfortable cotton twill. PFAS-free. 150 100% cotton, 375 g/m² Heavyweight cotton twill. Durable. A prewashed garment minimises future shrinkage. PFAS-free. 192 Graphite Light - 70% carbon / 30% aramid, 245 g/m² Inherent Flame Retardant fabric for protection for welding. PFAS-free. EN ISO 14116 index 3 EN ISO 11612 B1 C1 F1 EN ISO 11611 class 1 213 HTPA Dobby - 100% polyamide, 260 g/m² Reinforcement fabric structured weave with extra high durability. PFAS-free finish. 221 60% cotton / 40% polyester, 200 g/m² Cotton/polyester twill, with feel of cotton and advantages of polyester for durability and washing characteristics. PFAS-free. 261 65% polyester / 35% cotton, 500 g/m² Bonded jersey with 100% polyester fleece. PFAS-free finish. 263 51% polyester / 49% cotton, 300 g/m² Sweatshirt quality with ring spun reverse. PFAS-free. 264 80% polyester / 50% cotton, 300 g/m² Sweatshirt quality with ring spun reverse in fluorescent colours. PFAS-free. EN ISO 20471 RIS-3279-TOM fluorescent orange certified for UK railways 303 Beaver nylon - 50% polyamide / 50% cotton, 240 g/m² Twill with nylon on outside which gives hard wearing and abrasion durability. Water repellent impregnation supplemented with a PU-coated inside that gives protection against the wet. PFAS-free finish. 310 4-way stretch, 50% polyamid / 42% polyester / 8% elastic fibre, 250 g/m² Twill with stretch function in all directions. PFAS-free finish. 400 65% polyester / 35% cotton, 245 g/m² Cotton/polyester twill, with high comfort level and excellent washing characteristics. The cloth is durable, highly colour-fast and wrinkle resistant. Quick drying. PFAS-free.
149
No. Fabric description 428 55% polyester / 45% cotton, 215 g/m² Tricot. 2-layer jacquard with 3-functions that transports and absorbs moisture while insulating heat. PFAS-free. 440 54% cotton / 46% polyester, 260 g/m² Fluorescent twill with ripstop for enhanced tear strength. Cotton inside for extra high comfort level. EN ISO 20471 for fluorescent colours RIS-3279-TOM fluorescent orange certified for UK railways 441 74% polyester / 24% cotton / 2% elastic fibre, 245 g/m² Fluorescent satin with stretch. Cotton inside for extra high comfort level. PFAS-free. EN ISO 20471 for fluorescent colours RIS-3279-TOM fluorescent orange certified for UK railways 460 T-TEX - 100% polyester, PU coated, 180 g/m² Wind and water repellent. PFAS-free. Waterproof 5 000 mm. 464 T-TEX Plain - 100% polyester, PU-coated, 200 g/m² Fluorescent polyester fabric with structured yarn. PFAS-free finish. 465 T-TEX 3L - 100% polyester, PU-laminated, 145 g/m² Fabric with 3 layer function. Wind and waterproof according. Waterproof 10 000 mm. Breathability / water vapor resistance 8.2 Pa m²/W. EN 343 class 4:4 466 T-TEX EWR - 100% polyester, PU laminated, 205 g/m² Wind and waterproof. PFAS-free finish. Waterproof 5000 mm. Breathability / water vapor resistance 17.2 Pa m²/W. EN 343 class 4:3 EN ISO 20471 for fluorescent colours RIS-3279-TOM fluorescent orange certified for UK railways 470 100% polyester, 300 g/m² 3 layer fleece with PU laminate and mesh reverse, wind resistant. PFAS-free. 480 92% polyester / 8% elastic fibre, 325 g/m² Softshell, PU laminated with polyester fleece. PFAS-free finish. Wind and water repellent. Waterproof 3000 mm. EN ISO 20471 for fluorescent colours RIS-3279-TOM fluorescent orange certified for UK railways 500 65% polyester / 35% cotton, 300 g/m² Cotton/polyester twill, with high comfort level and excellent washing characteristics. The cloth is durable, highly colour-fast and wrinkle resistant. Comfort finish gives a pleasant cotton feel. PFAS-free. 510 100% polyester fleece, 220 g/m² Face side brushed. PFAS-free. 511 100% polyester fleece, 280 g/m² Double brushed. PFAS-free. EN ISO 20471 for fluorescent colours RIS-3279-TOM fluorescent orange certified for UK railways 515 100% polyester, 215 g/m² Double diamond quilt. PFAS-free. 801 Barricader TC - 100% para-aramid, with polymer coating, 545 g/m² Inherent Flame Retardant reinforcement fabric with good protection against molten metal, convective heat and radiant heat. EN ISO 11612 A1+A2 B2 C1 E3 EN ISO 11611 class 1 EN 1149-3 802 Barricader EP - 99% para-aramid / 1% antistatic, 545 g/m² Inherent Flame Retardant reinforcement fabric with good protection against molten metal splashes. EN ISO 11612 A1 B1 C1 D3 E3 F2 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 EN ISO 20471 for fluorescent colours EN 1149-3 804 HTFR Dobby - 39% modacrylic / 28% polyamide / 17% cotton / 15% aramid / 1% antistatic, 295 g/m² Inherent Flame Retardant reinforcement fabric EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 1 EN 1149-3 805 FR Mesh – 98% aramid / 2% antistatic, 110 g/m² Inherent Flame Retardant mesh. PFAS-free. EN ISO 14116 index 3 EN 1149-3 811 Tera TX - 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 260 g/m² Inherent Flame Retardant fabric with pleasant feel. Extra reinforced yarn gives good tear resistance despite low weight.To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. EN ISO 11612 A1+A2 B1 C1 E1 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 8.1 cal/cm², EBT: 8.7 cal/cm² NFPA 70E, ASTM F1506 LOI 29.8% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours
No. Fabric description 812 Tera TX TW - 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 260 g/m² Inherent Flame Retardant twill. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 9,1 cal/cm², EBT: 10 cal/cm² LOI 29,8% EN 1149-3 EN 13034 821 Edge HVO - 50% polyester / 27% modacrylic / 22% cotton / 1% antistatic, 370 g/m² Inherent Flame Retardant fabric. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. EN ISO 11612 A1 B1 C1 D1 E3 F1 EN ISO 11611 class 2 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 9.2 cal/cm², ATPV: 11.0 cal/cm² LOI 27.5% EN 1149-3 EN 13034 (only for acid and alkaline) EN ISO 20471 for fluorescent colours RIS-3279-TOM fluorescent orange certified for UK railways 822 Edge 350 IR - 45% modacrylic / 33% cotton / 50% polyester / 2% antistatic, PU-laminated, 350 g/m² Inherent Flame Retardant fabric with PU laminate. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. Wind and waterproof. Waterproof > 8000 mm. Breathability / water vapor resistance 19.8 Pa m²/W. EN ISO 11612 A1 B1 C1 E1 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 EN 61482-1-2:2014 APC 2 (822+054) IEC 61482-1-1:2009, ATPV: 9,8 cal/cm² IEC 61482-1-1:2019, ELIM: 30 cal/cm², ATPV: 41 cal/cm² (822+054) LOI 29.5% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours RIS-3279-TOM fluorescent orange certified for UK railways EN 343, class 4:4 830 Apex 300 - 98% aramid / 2% antistatic, 300 g/m² Inherent Flame Retardant satin with good Flame Retardant protection, combined with high durability. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. EN ISO 11612 A1+A2 B1 C1 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 9.4 cal/cm², ATPV: 12 cal/cm² LOI 28% EN 1149-3 EN 13034 832 Apex 220 – 98% aramid / 2% antistatic, 220 g/m² Inherent Flame Retardant twill. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. EN ISO 11612 A1 B1 C1 F1 LOI 28% EN 1149-3 EN 13034 846 Ara TX - 36% modacrylic / 33% polyester / 30% aramid / 1% antistatic, 260 g/m² Inherent Flame Retardant fabric in fluorescent colour. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 8,0 cal/cm², ATPV: 8,6 cal/cm² LOI 30.1% EN 1149-3 EN 13034 EN ISO 20471 RIS-3279-TOM fluorescent orange certified for UK railways 850 Denim Stretch 1.0 - 57% modacrylic / 37% cotton / 5% elastic fibre / 1% antistatic, 345 g/m² Inherent Flame Retardant unwashed jeans fabric. PFAS-free. EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 8,3 cal/cm², EBT: 14 cal/cm² LOI 29.4% EN 1149-3 852 FR Stretch - 78% aramid / 50% elastic fibre / 2% antistatic, 320 g/m² Inherent Flame Retardant twill with high elasticity. PFAS-free. EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 10 cal/cm², ATPV: 11 cal/cm² EN 1149-3
150
No. Fabric description 862 Outback 250 - 65% viscose / 22% aramid / 12% polyamide / 1% antistatic, 250 g/m² Inherent Flame Retardant fabric with good Flame Retardant protection combined with a soft feeling and good washing properties. EN ISO 11612 A1+A2 B1 C1 E1 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 7,6 cal/cm², ATPV: 11 cal/cm² LOI 28.9% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours 863 Outback HW – 74% viscose / 15% aramid / 10% polyamide / 1% antistatic, 425 g/m² Inherent Flame Retardant fabric suitable for welding. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. EN ISO 11612 A1+A2 B1 C1 E3 F1 EN ISO 11612 B2 C2 (863+920) EN ISO 11611 class 2 EN 61482-1-2:2014 APC 2 IEC 61482-1-1:2019, ELIM: 16 cal/cm², ATPV: 18 cal/cm² LOI 28.9% EN 1149-3 EN 13034 (only for acid and alkaline) 864 Outback J220 - 40% viscose / 26% modacrylic / 18% cotton / 8% polyamide / 6% aramid / 2% antistatic, 425 g/m² Inherent Flame Retardant knitted interlock, with a low weight and high ELIM. PFAS-free. EN ISO 11612 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 8,3 cal/cm², ATPV: 10 cal/cm² EN 1149-3 EN ISO 20471 873 Magma C - 55% viscose / 40% wool / 5% polyamide, 370 g/m² Inherent Flame Retardant fabric. Comfortable wool quality suitable for aluminium industry. PFAS-free. EN ISO 11612 A1 + A2 B1 C2 D3 E3 F1 EN ISO 11612 B2 C2 (873+901) EN ISO 11611 class 2 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2009, ATPV: 9.5 cal/cm² LOI 25.9% Cryolite ISO 9185 85 g 874 Magma HV - 54% viscose / 50% wool / 50% polyamide / 5% aramid / 1% antistatic, 375 g/m² Inherent Flame Retardant fabric. Fluorescent yellow. Suitable for aluminium industry. PFAS-free. EN ISO 11612 A1+A2 B1 C1 D3 E3 F1 EN ISO 11611 class 2 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2009, ATPV: 14.0 cal/cm² LOI 33.4% Cryolite ISO 9185 > 100g EN ISO 20471 875 Magma S - 70% viscose / 50% wool / 10% polyamide, 310 g/m² Inherent Flame Retardant fabric. Comfortable wool quality suitable for aluminium industry. PFAS-free. EN ISO 11612 A1+A2 B1 C1 D3 E3 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 6,0 cal/cm², ATPV: 7,4 cal/cm² LOI 27.8% Cryolite ISO 9185 94g EN ISO 20471 for fluorescent colours 882 Cantex 2.0 / Cantex 2.0 HV - 53% modakryl / 36% bomull / 6% viskos / 883 3% aramid / 2% antistat, 350 g/m² Inherent Flame Retardant fabric with good protection against molten metal, convective heat or radiant heat. Highest possible protection against molten steel. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. PFAS-free. EN ISO 11612 A1+A2 B1 C1 E3 F1 EN ISO 11612 C2 (882/883+920) EN ISO 11611 class 2 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 9,2 cal/cm², ATPV: 13,0 cal/cm² LOI 32.3% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours
No. Fabric description 884 Cantex Stretch - 48% modacrylic / 35% cotton / 12% polyamide / 3% elastic fibre / 2% antistatic, 365 g/m² Inherent Flame Retardant fabric with highest possible protection against molten iron. Stretch fibre in the fabric increases the comfort. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. EN ISO 11612 A1+A2 B1 C1 E3 F1 EN ISO 11612 C2 (884+920) EN ISO 11611 class 2 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 12 cal/cm², ATPV: 18 cal/cm² LOI 29,5% EN 1149-3 EN 13034 (only for acid and alcaline) EN ISO 20471 for fluorescent yellow 885 Cantex Weld - 50% modacrylic / 36% cotton / 12% polyamide / 2% antistatic, 365 g/m² Inherent Flame Retardant fabric with highest possible protection against molten iron. Suitable for welding and grinding. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. EN ISO 11612 A1+A2 B1 C1 E3 F1 EN ISO 11612 C2 (885+920) EN ISO 11611 class 2 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 13 cal/cm², EBT: 16 cal/cm² LOI 29,0% EN 1149-3 EN 13034 (only for acid and alcaline) EN ISO 20471 for fluorescent yellow 891 Cantex Dual 220 - 35% modacrylic / 30% polyester / 21% viscose / 9% cotton / 3% polyamide / 2% antistatic, 220 g/m² Double knitted, inherent Flame Retardant tricot with a high comfort level in fluorescent colours. PFAS-free. EN ISO 11612 A1 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2009, ATPV: 7.3 cal/cm² LOI 25.4% EN 1149-3 EN ISO 20471 892 Cantex Dual 320 - 42% modacrylic / 21% polyester / 18% cotton / 14% viscose / 3% polyamide / 2% antistatic, 320g/m² Double knitted, inherent Flame Retardant tricot with a high comfort level in fluorescent colours. PFAS-free. EN ISO 11612 A1 B1 C2 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2009, ATPV: 11.3 cal/cm² LOI 28.3% EN 1149-3 EN ISO 20471 893 Cantex Fleece - 45% modacrylic / 35% cotton / 18% polyester / 2% antistatic, 330 g/m² Inherent Flame Retardant fleece. PFAS-free. EN ISO 11612 A1+A2 B1 C2 F2 EN 61482-1-2:2014 APC 1 EN 1149-3 894 Cantex Jersey 170AT - 54% modacrylic / 44% cotton / 2% antistatic, 170g/m² Inherent Flame Retardant single jersey. PFAS-free. EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-1-2:2014 APC 1 EN 1149-3 895 Cantex Jersey AT - 60% modacrylic / 38% cotton / 2% antistatic, 180 g/m² Inherent Flame Retardant single jersey. PFAS-free. EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM 3,9 cal/cm², EBT: 4,6 cal/cm² LOI 26,0% EN 1149-3 EN ISO 20471 for fluorescent colours 896 Outback J245 - 79% viscose / 10% aramid / 10% polyamide / 1% antistatic, 245 g/m² Inherent Flame Retardant single jersey with protection against Electric Arc, open arc cat.2. PFAS-free. EN ISO 11612 A1 B1 C1 F1 IEC 61482-1-1:2009, EBT: 8.5 cal/cm² EN 1149-3 897 Cantex Pique - 60% modacrylic / 38% cotton / 2% antistatic, 220 g/m² Inherent Flame Retardant pique. PFAS-free. EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 4,8 cal/cm², EBT: 5,4 cal/cm² LOI 26.1% EN 1149-3
151
No. Fabric description 898 Cantex Jersey IR - 54% modacrylic / 44% cotton / 2% antistatic, PU-laminated, 210 g/m² Functional and light lining in Inherent Flame Retardant fabric. Wind and water repellent laminate. PFAS-free. Waterproof 10000 mm EN ISO 14116 Index 3 EN 61482-1-2:2014 APC 2 (811+898) IEC 61482-1-1:2019, ELIM: 19 cal/cm², ATPV: 21 cal/cm² (811+898) EN 1149-3 899 Cantex Terry - 60% modacrylic / 38% cotton / 2% antistatic, 290 g/m² Inherent Flame Retardant sweatshirt tricot with ring spun reverse. PFAS-free. EN ISO 11612 A1+A2 B1 C2 F2 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 8,6 cal/cm², EBT: 11 cal/cm² LOI 26.5% EN 1149-3 EN ISO 20471 for fluorescent colours 901 Merino RX - 60% wool / 38% viscose / 2% antistatic, 200 g/m² Inherent Flame Retardant knitted rib in soft merino wool and FR viscose. PFAS-free. EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 4,6 cal/cm², ATPV: 5,3 cal/cm² LOI 27.7% EN 1149-3 903 Merino TX - 60% wool / 38% viscose / 2% antistatic, 360 g/m² Inherent Flame Retardant terry in soft merino wool and FR viscose. PFAS-free. EN ISO 11612 A1+A2 B1 C2 D2 E1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 9,6 cal/cm², EBT: 10 cal/cm² LOI 28.7% EN 1149-3 904 Merino JX - 55% wool / 43% viscose / 2% antistatic, 220 g/m² Inherent Flame Retardant knitted jacquard in soft merino wool and FR viscose. PFAS-free. EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 4,6 cal/cm², ATPV: 5,3 cal/cm² LOI 27,7% EN 1149-3 905 Merino FX - 60% wool / 38% viscose / 2% antistatic, 220 g/m² Inherent Flame Retardant knitted terry in soft merino wool and FR viscose. PFAS-free. EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 6,1 cal/cm², ATPV: 6,5 cal/cm² LOI 28,7% EN 1149-3 911 Tera TX Light - 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 160 g/m² Shirt quality in comfortable, Inherent Flame Retardant twill. PFAS-free. EN ISO 11612 A1 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 5,0 cal/cm², ATPV: 5,8 cal/cm² LOI 26,7% EN 1149-3 EN ISO 20471 for fluorescent colours 912 Tera TX Light FC - 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 160 g/m² Shirt quality in comfortable, Inherent Flame Retardant twill. To maintain chemical protection (EN 13034), the protective clothing must be reimpregnated after washing. EN ISO 11612 A1 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 5,0 cal/cm², ATPV: 5,8 cal/cm² LOI 26,7% EN 1149-3 EN ISO 20471 for fluorescent colours EN 13034 913 Tera TX Light Stretch - 45% modacrylic / 34% cotton / 17% polyamide / 2% elastic fibre / 2% antistatic, 180 g/m² Stretchy shirt quality in comfortable, Inherent Flame Retardant twill. PFAS-free. EN ISO 11612 A1 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 5,5 cal/cm², ATPV: 6,3 cal/cm² EN 1149-3 920 Cantex JX - 60% modacrylic / 38% cotton / 2% antistatic, 235 g/m² Inherent Flame Retardant channel stitched tricot. PFAS-free. EN ISO 11612 A1 B1 C1 F1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 7,5 cal/cm², EBT: 8 cal/cm² LOI 30.1% EN 1149-3 924 Cantex JL - 57% modacrylic / 37% cotton / 4% elastic fibre / 2% antistatic, 210 g/m² Inherent Flame Retardant single jersey with elastic fibre. PFAS-free. EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-1-1:2019, ELIM: 4,3 cal/cm², EBT: 4,5 cal/cm² EN 1149-3
No. Fabric description 932 Cantex 240IR Recycled – 50% modacrylic / 43% cotton / 6% polyamide / 1% antistatic, PU-laminated, 300 g/m² Inherent Flame Retardant twill with PU laminate and 50% recycled fibre. PFAS-free. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. Wind and waterproof. Waterproof 10 000 mm. Breathability / water vapor resistance 18,7 Pa m²/W. EN ISO 11612 A1+A2 B1 C1 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 IEC 61482-1-1:2019, ELIM: 8,6 cal/cm², ATPV: 10 cal/cm² EN 13034 EN 1149-3 EN ISO 20471 for fluorescent colours EN 343 class 4:3 943 Mega TX 230IR - 40% modacrylic / 59% viscose / 1% antistatic, PU-laminated, 230 g/m² Inherent Flame Retardant fabric with PU laminate. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. Wind and waterproof. Waterproof 8 000 mm. Breathability / water vapor resistance 8.3 Pa m²/W. EN ISO 11612 A1+A2 B1 C1 F1 EN ISO 11611 class 1 EN 61482-1-2:2014 APC 1 EN 61482-1-2:2014 APC 2 (943+054) IEC 61482-1-1:2019, ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm² (943+805) LOI 25.5% EN 13034 EN 1149-3 EN ISO 20471 for fluorescent colour EN 343 class 4:4 950 Windtech FR 340 - 54% modacrylic / 42% cotton / 2% polyamide / 1% elastic fibre / 1% antistatic, PU-laminated, 340 g/m² Inherent Flame Retardant softshell. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. Wind and water repellent. Waterproof 10 000 mm. Breathability / water vapor resistance 22.0 Pa m²/W. EN ISO 11612 A1 B1 C1 F1 EN ISO 11611 class 2 EN 61482-1-2:2014 APC 2 IEC 61482-1-1:2019, ELIM: 23.0 cal/cm², EBT: 28.0 cal/cm² LOI 29.5% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours 951 Windtech FR HVO - 45% modacrylic / 36% cotton / 18% polyester / 1% antistatic, PU-laminated, 385 g/m² Inherent Flame Retardant softshell. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. Wind and water repellent. Waterproof 10 000 mm. EN ISO 11612 A1 B1 C2 F2 EN ISO 11611 klass 2 EN 61482-1-2:2014 APC 2 IEC 61482-1-1:2019, ELIM: 12.0 cal/cm², ATPV: 19.0 cal/cm² LOI 29,5% EN 1149-3 EN 13034 EN ISO 20471 RIS-3279-TOM fluorescent orange certified for UK railways 955 Windtech FR 550 - 53% modacrylic / 42% cotton / 3% polyamide / 1% elastic fibre / 1% antistatic, PU-laminated, 550 g/m² Inherent Flame Retardant softshell with very high protection against Electric Arc. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing. Wind and water repellent. Waterproof 10 000 mm. Breathability / water vapor resistance 26,8 Pa m²/W. EN ISO 11612 A1 B2 C2 F2 EN 61482-1-2:2014 APC 2 IEC 61482-1-1:2019, ELIM: 40 cal/cm², EBT: 44 cal/cm² LOI 29,5% EN 1149-3 EN 13034 EN ISO 20471 for fluorescent colours
153
SHOULDER+SLEEVE
CHEST
WAIST HIP
INSIDE LEG
GENTS Primarily use waist and inside leg measurements to choose the right size of trousers.
C-size (Regular waist and regular leg length) Size
44
46
48
50
52
54
56
58
60
62
64
Waist inches
30”R
32”R
33”R
34”R
36”R
38”R
40”R
42”R
45”R
48”R
50”R
Waist (cm)
74-78
78-82
82-86
86-90
90-94
94-99
99-104
104-110
110-116
116-122
122-128
Hip (cm)
94
98
102
106
110
114
118
122
126
130
134
Inside leg (cm)
79
80
81
82
83
84
85
85
85
85
85
Inside leg inches
31”
31.5”
32”
32.4”
32.8”
33.1”
33.5”
33.5”
33.5”
33.5”
33.5”
C-size (Regular waist and longer leg length) Size
146
148
150
152
154
156
Waist inches
32”T
33”T
34”T
36”T
38”T
40”T
Waist (cm)
78-82
82-86
86-90
90-94
94-99
99-104
Hip (cm)
98
102
106
110
114
118
Inside leg (cm)
85
86
87
88
89
90
Inside leg inches
33.5”
34”
34.4”
34.8”
35”
35.5”
D-size (Larger waist and shorter leg length) Size
80
84
88
92
96
100
104
108
112
116
120
Waist inches
28"S
30”S
32”S
33”S
34”S
36”S
38”S
40”S
42”S
45”S
48”S
Waist (cm)
72-76
76-80
80-84
84-88
88-92
92-96
96-100
100-105
105-110
110-116
116-122
Hip (cm)
90
93
96
100
104
108
112
116
120
124
128
Inside leg (cm)
78
78
78
78
78
78
79
80
81
81
81
Inside leg inches
30.7”
30.7”
30.7”
30.7”
30.7”
30.7”
31”
31.5”
32”
32”
32”
Primarily use chest measurements to choose the right size.
Size
XXS
XS
S
M
L
XL
XXL
3XL
4XL
Chest (cm)
78-86
84-92
90-98
96-104
102-110
108-116
114-122
120-128
126-134 128-136
Hip (cm)
86-92
90-96
94-100
98-106
104-112
110-118
116-124
122-130
Shoulder+Sleeve (cm)
73-76
75-77
77-80
80-82
81-84
83-85
84-87
86-88
87-90
Shirt size
33-34
35-36
37-38
39-40
41-42
43-44
45-46
47-48
49-50
C-size mens
40-42
44
46-48
50
52-54
56
58-60
62
64-66
153
SHOULDER+SLEEVE
CHEST
WAIST HIP
INSIDE LEG
GENTS Primarily use waist and inside leg measurements to choose the right size of trousers.
C-size (Regular waist and regular leg length) Size
44
46
48
50
52
54
56
58
60
62
64
Waist inches
30”R
32”R
33”R
34”R
36”R
38”R
40”R
42”R
45”R
48”R
50”R
Waist (cm)
74-78
78-82
82-86
86-90
90-94
94-99
99-104
104-110
110-116
116-122
122-128
Hip (cm)
94
98
102
106
110
114
118
122
126
130
134
Inside leg (cm)
79
80
81
82
83
84
85
85
85
85
85
Inside leg inches
31”
31.5”
32”
32.4”
32.8”
33.1”
33.5”
33.5”
33.5”
33.5”
33.5”
C-size (Regular waist and longer leg length) Size
146
148
150
152
154
156
Waist inches
32”T
33”T
34”T
36”T
38”T
40”T
Waist (cm)
78-82
82-86
86-90
90-94
94-99
99-104
Hip (cm)
98
102
106
110
114
118
Inside leg (cm)
85
86
87
88
89
90
Inside leg inches
33.5”
34”
34.4”
34.8”
35”
35.5”
D-size (Larger waist and shorter leg length) Size
80
84
88
92
96
100
104
108
112
116
120
Waist inches
28"S
30”S
32”S
33”S
34”S
36”S
38”S
40”S
42”S
45”S
48”S
Waist (cm)
72-76
76-80
80-84
84-88
88-92
92-96
96-100
100-105
105-110
110-116
116-122
Hip (cm)
90
93
96
100
104
108
112
116
120
124
128
Inside leg (cm)
78
78
78
78
78
78
79
80
81
81
81
Inside leg inches
30.7”
30.7”
30.7”
30.7”
30.7”
30.7”
31”
31.5”
32”
32”
32”
Primarily use chest measurements to choose the right size.
Size
XXS
XS
S
M
L
XL
XXL
3XL
4XL
Chest (cm)
78-86
84-92
90-98
96-104
102-110
108-116
114-122
120-128
126-134 128-136
Hip (cm)
86-92
90-96
94-100
98-106
104-112
110-118
116-124
122-130
Shoulder+Sleeve (cm)
73-76
75-77
77-80
80-82
81-84
83-85
84-87
86-88
87-90
Shirt size
33-34
35-36
37-38
39-40
41-42
43-44
45-46
47-48
49-50
C-size mens
40-42
44
46-48
50
52-54
56
58-60
62
64-66
154 Art.No. Description
Page
Art.No. Description
Page
Art.No. Description
Page
1110 40 Boilersuit
132
4380 44 Hi-Vis Stretch Shorts
122
5205 82 Flame Retardant Winter Jacket
88,95
1120 40 Service and Industry Trousers
132
4381 11 Hi-Vis Ladies T-shirt
124
5206 82 Flame Retardant Ladies Winter Jacket
86,98
1121 40 Stretch Trousers
130
4382 44 Hi-Vis Craftsman Stretch Shorts
122
5208 82 Flame Retardant Winter Jacket
88,95 86,98
1122 40 Advanced Stretch Trousers
130
4384 26 Hi-Vis Ladies Half Zip Sweatshirt
124
5209 82 Flame Retardant Ladies Winter Jacket
1126 40 Advanced Ladies Stretch Trousers
131
4387 11 Hi-Vis Ladies Long Sleeves T-shirt
124
5211 84 Flame Retardant Boilersuit
1127 40 Maternity Stretch Trousers
131
4388 44 Hi-Vis Ladies Stretch Shorts
121
5219 95 Flame Retardant Ladies Softshell Jacket
88 39,86,98
1128 40 Ladies Stretch Trousers
131
4389 44 Hi-Vis Ladies Craftsman Stretch Shorts
121
5220 84 Flame Retardant Trousers
1129 40 Ladies Service and Industry Trousers
132
4620 51 Hi-Vis Waistcoat
125
5221 84 Flame Retardant Hi-Vis Trousers
89
1131 40 Warehouse Coat
132
5010 88 Flame Retardant Boilersuit
72
5224 84 Flame Retardant Ladies Trousers
87
1141 40 Stretch Bib 'n' Brace
130
5020 88 Flame Retardant Trousers
72
5225 84
1149 40 Stretch Bib 'n' Brace
130
5023 88 Flame Retardant Trousers
72
5233 95 Flame Retardant Softshell Jacket
Flame Retardant Hi-Vis Ladies Trousers
89
87 39,88,95
1151 40 Stretch Trousers
130
5024 88 Flame Retardant Rail Cutting Trousers
73
5234 84 Flame Retardant Jacket
88
1152 40 Advanced Stretch Trousers
130
5027 88 Flame Retardant Ladies Trousers
76
5237 84 Flame Retardant Ladies Jacket
86
1156 40 Ladies Advanced Stretch Trousers
131
5028 88 Flame Retardant Ladies Trousers
76
5240 84 Flame Retardant Bib 'n' Brace
88
1158 40 Ladies Advanced Stretch Trousers
131
5030 89 Flame Retardant Cardigan
108
5249 84 Flame Retardant Bib 'n' Brace
88
1160 40 Craftsman Waistcoat
130
5031 89 Flame Retardant Hood Jacket
108
5252 84 Flame Retardant Trousers
1180 40 Shorts
132
5035 88 Flame Retardant Jacket
73
5253 84
1181 40 Stretch Shorts
130
5037 88 Flame Retardant Ladies Jacket
76
1182 40 Craftsman Stretch Shorts
130
5038 89 Flame Retardant Ladies Hood Jacket
109
1187 40 Ladies Stretch Shorts
131
5039 89 Flame Retardant Ladies Cardigan
109
1188 40 Ladies Craftsman Stretch Shorts
131
5040 88 Flame Retardant Bib 'n' Brace
72
1189 40 Ladies Shorts
132
5050 88 Flame Retardant Craftsman Trousers
72
1191 40 ¾ Length Stretch Trousers
130
5053 88 Flame Retardant Craftsman Trousers
72
1194 40 ¾ Length Craftsman Stretch Trousers
130
1196 40
Ladies ¾ Length Craftsman Stretch Trousers
131
1198 40 Ladies ¾ Length Stretch Trousers
131
1921 40 Stretch Trousers
128
1922 40 Advanced Stretch Trousers
128
1926 40 Ladies Advanced Stretch Trousers
129
1928 40 Ladies Stretch Trousers
129
1941 40 Stretch Bib 'n' Brace
128
1949 40 Stretch Bib 'n' Brace
128
1951 40 Stretch Trousers
128
1952 40 Advanced Stretch Trousers
128
1956 40 Ladies Advanced Stretch Trousers
129
1958 40 Ladies Stretch Trousers
129
2050 13 Craftsman Trousers
133
2511 13 Boilersuit
133
2521 13 Trousers
133
2531 13 Jacket
133
2541 13 Bib ‘n' Brace
133
4301 46 Hi-Vis Winter Jacket
119
4303 46 Hi-Vis Ladies Winter Jacket
118
Flame Retardant Ladies Craftsman Trousers Flame Retardant Ladies Craftsman 5058 88 Trousers 5057 88
5076 91 Flame Retardant Shirt
76 76 105
5079 91 Flame Retardant Ladies Shirt
104
5081 89 Flame Retardant T-shirt
108
5082 89 Flame Retardant Long Sleeves T-shirt
108
5083 91 Flame Retardant Shirt
105
5084 86 Flame Retardant Long Sleeves T-shirt
108
5085 89 Flame Retardant Sweatshirt
108
5086 89 Flame Retardant T-shirt
108
5087 89 Flame Retardant Long Sleeves T-shirt
108
5088 89 Flame Retardant Half Zip Sweatshirt
108
5089 89 Flame Retardant Ladies L.S. T-shirt
109
5093 91 Flame Retardant Hi-Vis Ladies Shirt
104
5094 86 Flame Retardant Ladies L.S. T-shirt
109
5097 88 Flame Retardant Maternity Trousers
76
5098 89 Flame Retardant Ladies L.S. T-shirt
109
Flame Retardant Ladies Half Zip 5099 89 Sweatshirt
109
5101 93 Flame Retardant Winter Jacket
94
5103 93 Flame Retardant Ladies Winter Jacket
98
4305 46 Hi-Vis Shell Trousers
119
4307 46 Hi-Vis Ladies Shell Trousers
118
5107 93
4308 46 Hi-Vis Shell Jacket
119
5109 93 Flame Retardant Winter Jacket, Hood
4310 44 Hi-Vis Boilersuit
123
5111 94 Flame Retardant Winter Boilersuit
Flame Retardant Ladies Winter Jacket, Hood
98
Flame Retardant Trousers, Windbreaker
5257 84 Flame Retardant Ladies Trousers 5258 84
Flame Retardant Ladies Trousers, Windbreaker
5263 95 Flame Retardant Softshell Waistcoat 5267 95
Flame Retardant Ladies Softshell Waistcoat
89 89,96 87 87,99 39,88,95 39,86,99
5270 89 Flame Retardant Sweatshirt
108
5271 89 Flame Retardant T-shirt
108
5281 84 Flame Retardant Stretch Trousers
39,89
5284 82 Flame Retardant Rail Cutting Trousers Flame Retardant Ladies Stretch Trousers Flame Retardant Maternity Stretch 5291 84 Trousers Flame Retardant Craftsman Stretch 5294 84 Trousers Flame Retardant Ladies Craftsman 5297 84 Stretch Trousers 5286 84
89 39,87 39,87 39,89 39,87
5420 88 Flame Retardant Trousers
75
5429 88 Flame Retardant Ladies Trousers
77
5431 88 Flame Retardant Jacket
75
5440 88 Flame Retardant Bib 'n' Brace
75
5452 88 Flame Retardant Craftsman Trousers
75
5459 88
Flame Retardant Ladies Craftsman Trousers
77
5510 86 Welding Boilersuit
81
5520 86 Welding Trousers
81
5530 86 Welding Jacket
81
5541 86 Welding Bib 'n' Brace
81
5552 86 Welding Craftsman Trousers
81
5572 19 Welding Chaps
111
5573 80 Welding Poncho
111
5575 19 Welding Apron, Short
111
94
5576 19 Welding Apron with collar
111
35,97
5577 19 Welding Sleeve Protection
111
4315 46 Hi-Vis Winter Boilersuit
119
5118 94 Flame Retardant Parka
35,94
5578 19 Welding Balaclava
111
4318 46 Hi-Vis Winter Parka
119
5119 94 Flame Retardant Parka + Lining 9128
35,94
5625 87 Flame Retardant Trousers
83
4320 44 Hi-Vis Stretch Trousers
122
5122 93 Flame Retardant Winter Trousers
96
5626 87 Flame Retardant Trousers
83
4321 44 Hi-Vis Stretch Trousers
122
5127 93
99
5628 87 Flame Retardant Ladies Trousers
83
Flame Retardant Ladies Winter Trousers
4324 44 Hi-Vis Trousers
122
5132 94 Flame Retardant Shell Trousers
35,96
5629 87 Flame Retardant Ladies Trousers
83
4325 44 Hi-Vis Ladies Trousers
121
5135 94 Flame Retardant Shell Jacket
35,94
5632 87 Flame Retardant Coat
83
4326 44 Hi-Vis Maternity Stretch Trousers
121
5136 94 Flame Retardant Shell Jacket + 9128
35,94
5635 87 Flame Retardant Jacket
83
4327 44 Hi-Vis Maternity Stretch Trousers
121
5137 94 Flame Retardant Ladies Shell Jacket
34,98
5639 87 Flame Retardant Ladies Jacket
82
4328 44 Hi-Vis Ladies Stretch Trousers
121
Flame Retardant Ladies Shell Jacket + Lining 9129
34,98
5655 87 Flame Retardant Craftsman Trousers
83
4329 44 Hi-Vis Ladies Stretch Trousers
121
4330 44 Hi-Vis Jacket
122
4332 48 Hi-Vis Softshell Jacket
119
4334 26 Hi-Vis Cardigan
125
4335 44 Hi-Vis Jacket + Fleece Lining 9028
122
4336 26 Hi-Vis Ladies Cardigan
5138 94
5139 94 Flame Retardant Ladies Shell Trousers
34,99
5145 95 Flame Retardant Softshell Jacket
40,94
5149 95 Flame Retardant Ladies Softshell Jacket
40,98
5165 95 Flame Retardant Softshell Waistcoat
40,95
124
Flame Retardant Ladies Softshell 5169 95 Waistcoat
40,99
4339 44 Hi-Vis Ladies Jacket
121
5170 88 Flame Retardant Lined Trousers
66
4340 44 Hi-Vis Bib 'n' Brace Stretch
123
5171 88 Flame Retardant Lined Trousers
66
4341 44 Hi-Vis Craftsman Bib 'n' Brace Stretch
123
5173 88 Flame Retardant Lined Jacket
66
4350 44 Hi-Vis Craftsman Stretch Trousers
122
5174 88 Flame Retardant Lined Bib 'n' Brace
66
4351 44 Hi-Vis Craftsman Stretch Trousers Hi-Vis Ladies Craftsman Stretch Trousers Hi-Vis Ladies Craftsman Stretch 4359 44 trousers 4358 44
122 121
Flame Retardant Lined Craftsman 5175 88 Trousers Flame Retardant Lined Craftsman 5176 88 Trousers
5656 87 Flame Retardant Craftsman Trousers
83
5674 87 Flame Retardant Shirt
83,105
5678 87 Flame Retardant Ladies Shirt
82,104
5701 88 Flame Retardant Winter Jacket
74,94
5703 88 Flame Retardant Ladies Winter jacket
77,98
5710 88 Flame Retardant Boilersuit
74
5716 88 Flame Retardant Boilersuit
79
5720 88 Flame Retardant Trousers
74
5726 88 Flame Retardant Trousers
79
5727 88 Flame Retardant Ladies Trousers
79
66
5729 88 Flame Retardant Ladies Trousers
77
66
5730 88 Flame Retardant Jacket
74
121
5180 88 Flame Retradant Ladies Lined Trousers
65
5736 88 Flame Retardant Jacket
79
122
5181 88 Flame Retardant Ladies Lined Trousers
65
5737 88 Flame Retardant Ladies Jacket
77
4362 48 Hi-Vis Softshell Waistcoat
119
5183 88 Flame Retardant Ladies Lined Jacket
65
5739 88 Flame Retardant Ladies Jacket
79
4371 11 Hi-Vis T-shirt
125
5740 88 Flame Retardant Bib 'n' Brace
74
4372 11 Hi-Vis Long Sleeves T-shirt
125
4360 44 Hi-Vis Craftsman Stretch Vest
4374 26 Hi-Vis Half Zip Sweatshirt
125
4375 26 Hi-Vis sweatshirt
125
4376 11 Hi-Vis T-shirt
125
4377 11 Hi-Vis Long Sleeves T-shirt
125
4378 11 Hi-Vis Polo Shirt
125
Flame Retardant Ladies Lined 5185 88 Craftsman Trousers Flame Retardant Ladies Lined 5186 88 Craftsman Trousers 5193 95 Flame Retardant Softshell Coat 5194 95 Flame Retardant Softshell Trousers
65 65 36 36,96
5195 95 Flame Retardant Softshell Jacket
36,94
5201 84 Flame Retardant Trousers Windbreaker
89,96
Flame Retardant Ladies Trousers, 5202 84 Windbreaker
87,99
5742 88 Flame Retardant Bib 'n' Brace
79
5752 88 Flame Retardant Craftsman Trousers
74
5759 88
Flame Retardant Ladies Craftsman Trousers
5761 88 Flame Retardant Craftsman Waistcoat
77 74
5770 91 Flame Retardant Shirt
105
5774 86 Flame Retardant Shirt
105
155 Art.No. Description
Page
Art.No. Description
Page
Art.No. Description
Page
Art.No. Description
5778 86 Flame Retardant Ladies Shirt
104
5931 91 Flame Retardant Coat, "Visitor"
105
6311 90 Flame Retardant Ladies Long Johns
100
7791 15 ¾ Length Craftsman Trousers
137
5779 91 Flame Retardant Ladies Shirt
104
5932 91 Flame Retardant Coat
105
6312 90 Flame Retardant Long Johns
100
7799 15 ¾ Length Craftsman Ladies Trousers
136
5799 88 Flame Retardant Maternity Trousers 5801 81 Flame Retardant Winter Jacket
77 49,94
Page
5935 81 Flame Retardant Lab Coat
105
6314 90 Flame Retardant Ladies L.S. T-shirt
100
8120 91 Flame Retardant Shirt
105
5940 92 Flame Retardant Long Sleeves T-shirt
102
6315 90 Flame Retardant T-shirt Long Sleeves
100
8131 22 Long Sleeves Shirt
140
5802 81 Flame Retardant Ladies Winter Jacket
52,98
5945 89 Flame Retardant L.S. Poloshirt
107
6319 90 Flame Retardant Turtleneck
100
8141 22 Short Sleeves Shirt
140
5806 81 Flame Retardant Ladies Winter Jacket
52,98
5947 89 Flame Retardant Long Sleeves T-shirt
107
6321 81 Flame Retardant Stretch Trousers
40,50
9011 00 Socks
143
5808 81 Flame Retardant Winter Jacket
49,94
5811 81 Flame Retardant Boilersuit
51
5948 89 Flame Retardant Turtleneck
107
6322 81 Flame Retardant Stretch Trousers
5970 89 Flame Retardant Hat
113
Flame Retardant Craftsman Stretch Trousers Flame Retardant Craftsman Stretch 6325 81 Trousers Flame Retardant Ladies Stretch 6326 81 Trousers Flame Retardant Ladies Craftsman 6327 81 Stretch Trousers Flame Retardant Ladies Stretch 6328 81 Trousers Flame Retardant Ladies Craftsman 6329 81 Stretch Trousers
5818 81 Flame Retardant Ladies Boilersuit
52
5980 89 Flame Retardant Fleece Jacket
102
5820 81 Flame Retardant Trousers
51
5985 89 Flame Retardant Sweatshirt
107
5821 81 Flame Retardant Trousers
54
5822 81 Flame Retardant Trousers Windbreaker
51,96
5823 81 Flame Retardant Trousers Windbreaker
54,96
5990 89 Flame Retardant Fleece Long Johns
102
5994 91 Flame Retardant Headscarf
113
5995 92 Flame Retardant Balaclava
112
5997 92 Flame Retardant Sports Bra Prosthesis
103
5826 81 Flame Retardant Trousers
51
5827 81 Flame Retardant Ladies Trousers
53
5998 92 Flame Retardant Maternity Briefs
103
5828 81 Flame Retardant Ladies Trousers
55
5999 00 Flame Retardant Neck Protection
113
5829 81 Flame Retardant Ladies Trousers
53
6010 81 Flame Retardant Boilersuit
56
5831 81 Flame Retardant Jacket
50
6011 81 Flame Retardant Boilersuit
56
5834 81 Flame Retardant Jacket
50
6020 81 Flame Retardant Trousers
58
5836 81 Flame Retardant Ladies Jacket
52
6021 81 Flame Retardant Trousers
56
5838 81 Flame Retardant Ladies Jacket
52
6022 81 Flame Retardant Stretch Trousers
5840 81 Flame Retardant Bib 'n' Brace
51
6023 81 Flame Retardant Trousers
5841 81 Flame Retardant Bib 'n' Brace
54
6024 81 Flame Retardant Stretch Trousers
5849 81 Flame Retardant Bib 'n' Brace
51
5850 81 Flame Retardant Trousers
51
5851 81 Flame Retardant Craftsman Trousers
54
Flame Retardant Ladies Stretch Trousers Flame Retardant Ladies Stretch 6026 81 Trousers
Flame Retardant Craftsman Trousers, 5852 81 Windbreaker Flame Retardant Craftsman Trousers, 5853 81 Windbreaker 5856 81 Flame Retardant Craftsman Trousers
51,96 54,96
6025 81
43,58 54 42,56 43,59 42,57
6324 81
6330 90 Flame Retardant Cardigan
41,54
9013 00 Leather Belt
143
40,50
9016 00 Hammer Holder
143
41,54 40,53 40,53 41,55 41,55 107
6335 90 Flame Retardant Bodywarmer
107
6351 88 Flame Retardant Stretch Chinos
45,75
6352 85 Flame Retardant Stretch Jeans
45
6354 91 Flame Retardant Stretch Shirt
45,105
6356 88 Flame Retardant Lds Stretch Chinos
45,77
6359 85 Flame Retardant Ladies Stretch Jeans
45
6371 89 Flame Retardant Sweatshirt
107
6372 89 Flame Retardant Long Sleeves T-shirt
107
6373 89 Flame Retardant Ladies L.S. T-shirt
109
6375 89 Flame Retardant Sweatshirt
107
6376 89 Flame Retardant Hoodie
106
6027 81 Flame Retardant Ladies Trousers
55
6028 81 Flame Retardant Ladies Trousers
57
6377 89 Flame Retardant Ladies Hoodie
109
6029 81 Flame Retardant Ladies Trousers
59
6378 89 Flame Retardant Ladies T-shirt
109
51
6030 81 Flame Retardant Jacket
56
6379 89 Flame Retardant T-shirt
107
Flame Retardant Ladies Craftsman 5857 81 Trousers
53
6031 81 Flame Retardant Jacket
56
6395 90 Flame Retardant Wool Beanie
113
5858 81 Flame Retardant Ladies Trousers
55
6037 81 Flame Retardant Ladies Jacket
57
6040 81 Flame Retardant Bib 'n' Brace
58
6041 81 Flame Retardant Bib 'n' Brace
56
55,99
6050 81 Flame Retardant Craftsman Trousers
58
55,99
6051 81 Flame Retardant Craftsman Trousers
56
53 50
Flame Retardant Ladies Trousers, Windbreaker Flame Retardant Ladies Trousers, 5863 81 Windbreaker Flame Retardant Ladies Trousers, 5866 81 Windbreaker Flame Retardant Ladies Craftsman 5867 81 Trousers, Windbreaker 5868 81 Flame Retardant Bodywarmer
53,99
53,99 49,95
5870 81 Flame Retardant Lined Ladies Trousers
61
5874 81 Flame Retardant Lined Ladies Trousers
61
Flame Retardant Lined Ladies Craftsman Trousers Flame Retardant Lined Ladies 5879 81 Craftsman Trousers 5876 81
61 61
5880 81 Flame Retardant Lined Trousers
63
5881 81 Flame Retardant Lined Trousers
63
5882 81 Flame Retardant Lined Jacket
62
5884 81 Flame Retardant Lined Jacket
62
5885 81 Flame Retardant Lined Bib 'n' Brace
62
5886 81 Flame Retardant Lined Bib 'n' Brace
62
5887 81 Flame Retardant Lined Trousers
63
Flame Retardant Lined Craftsman Trousers Flame Retardant Lined Craftsman 5891 81 Trousers 5890 81
42,94 58
5860 81 Flame Retardant Craftsman Vest 5862 81
6032 95 Flame Retardant Softshell Jacket 6035 81 Flame Retardant Jacket
Flame Retardant Ladies Craftsman 5859 81 Trousers
63
Flame Retardant Craftsman Stretch Trousers Flame Retardant Craftsman Stretch 6054 81 Trousers Flame Retardant Ladies Craftsman 6055 81 Stretch Trousers Flame Retardant Ladies Craftsman 6056 81 Stretch Trousers Flame Retardant Ladies Craftsman 6058 81 Trousers Flame Retardant Ladies Craftsman 6059 81 Trousers 6052 81
6062 95 Flame Retardant Softshell Waistcoat
43,58
6396 81
Flame Retardant Maternity Stretch Trousers
40,53
9019 00 ID-Pocket
142
9020 00 Kneepads
142
9027 00 Braces
143
9028 51 Fleece Lining
142
9029 52 Belt
143
9032 00 Kneepads
142
9037 00 Elastic Belt
143
9041 00 Socks
143
9043 00 Flame Retardant Fleece Hat
113
9046 00 Belt
143
9048 00 Pilot Cap
114
9055 00 Flame Retardant Belt
115
9060 00 Flame Retardant Braces
115
9065 81 Flame Retardant Hood
49,52,95,113
9068 00 Beanie
143
9074 00 Flame Retardant Lightweight Sock
114
9075 00 Flame Retardant Sock
114
9079 00 Flame Retardant Wool Terry Sock
114
9093 00 Leather Belt
73,89,115
9094 80 Flame Retardant Tool Pockets
73,115
9095 82 Flame Retardant Tool Pockets
89,115
9105 81 Flame Retardant Armlet
115
9105 84 Flame Retardant Armlet
115
6397 90 Flame Retardant Neck Protection
113
9119 81 Flame Retardant ID-Pocket
Flame Retardant Maternity Stretch Trousers
41,55
9120 00 Kneepads
6398 81
119,143
9054 00 Flame Retardant Sock
115 115,142
6520 30 Pilot Jacket
139
9124 00 Cap
143
6620 83 Flame Retardant Trousers
85
9128 06 Flame Retardant Fibrefur Lining
114
6621 83 Flame Retardant Trousers
85
9129 06 Flame Retardant Lds Fibrefur Lining
114
6622 83 Flame Retardant Trousers
85
9142 88 Welding Cap
111
6623 83 Flame Retardant Trousers
85
9144 00 Kneepads
142
42,56
6624 83 Flame Retardant Trousers
85
9145 00 Kneepads
142
43,59
6630 83 Flame Retardant Jacket
85
9148 93 Flame Retardant Pilot Cap
6653 83 Flame Retardant Craftsman Trousers
85
9151 82 Flame Retardant Hood
86,88,95,113
6654 83 Flame Retardant Trousers
85
9151 93 Flame Retardant Hood
95,113
6710 88 Flame Retardant Boilersuit
70
9160 81
6720 88 Flame Retardant Trousers
70
9171 00 Flame Retardant Thick Sock
42,57 57 59 42,95
Flame Retardant Braces for Tool Holder Belt Loops
113
115 114
6729 88 Flame Retardant Ladies Trousers
71
9172 00 Flame Retardant Thick Sock
114
6072 81 Flame Retardant Lined Trousers
63
6730 88 Flame Retardant Jacket
70
9176 00 Flame Retardant Calf Support
114
6079 81 Flame Retardant Ladies Lined Trousers
61
6737 88 Flame Retardant Ladies Jacket
71
9179 95 Electric Arc Hood
6080 81 Flame Retardant Lined Trousers
63
6740 88 Flame Retardant Bib 'n' Brace
70
9190 00 Backpack / Bag
6081 81 Flame Retardant Lined Trousers
63
6752 88 Flame Retardant Trousers
70
9195 89 Flame Retardant Balaclava
6083 81 Flame Retardant Lined Jacket
63
6759 88 Flame Retardant Trousers
71
RG0001 Flame Retardant Gloves Contact
110
6084 81 Flame Retardant Lined Jacket
63
6761 88 Flame Retardant Waistcoat
70
RG0004 Flame Retardant Gloves ARC 16
110
37,112 142 37,112
6085 81 Flame Retardant Lined Bib 'n' Brace
62
6799 88 Flame Retardant Maternity Trousers
71
RG0005 Flame Retardant Gloves ARC 40
110
63
6086 81 Flame Retardant Lined Bib 'n' Brace
62
6920 51 Thermo Trousers
140
RG0006 Flame Retardant Gloves ARC 4
110
5892 81 Flame Retardant Lined Ladies Jacket
60
6087 81 Flame Retardant Lined Ladies Jacket
60
6930 51 Thermo Jacket
140
RG0008 Flame Retardant Gloves ARC 12
110
5893 81 Flame Retardant Ladies Lined Trousers
61
6088 81 Flame Retardant Lined Ladies Trousers
61
6972 42 Long Johns
140
RG0009 Flame Retardant Gloves ARC 10
110
5894 81 Flame Retardant Lined Ladies Jacket
60
6089 81 Flame Retardant Lined Ladies Trousers
5895 81 Flame Retardant Lined Bib 'n' Brace
62
Flame Retardant Maternity Stretch Trousers Flame Retardant Maternity Stretch 6099 81 Trousers
Flame Retardant Lined Ladies Craftsman Trousers Flame Retardant Lined Craftsman 5897 81 Trousers 5896 81
61
6094 81
61 43,59 42,57
63
6111 82 Flame Retardant Boilersuit
91
5899 81 Flame Retardant Maternity Trousers
55
6121 82 Flame Retardant Trousers
91
5900 92 Flame Retardant T-shirt
102
6131 82 Flame Retardant Jacket
91
5905 89 Flame Retardant Poloshirt
107
6200 46 Winter Jacket
139
5907 89 Flame Retardant T-shirt
107
6207 00 Hooded Jacket
128,135,139
5910 92 Flame Retardant Boxer Shorts
103
6210 46 Winter Boilersuit
139
5911 92 Flame Retardant Boxer Shorts
103
6226 46 Shell Trousers
139
5912 92 Flame Retardant Long Boxer Shorts
103
6235 46 Functional Parka
5913 92 Flame Retardant Ladies Boxer Briefs
103
6241 47 Functional Fleece Jacket
5914 92 Flame Retardant Sports Bra
103
6300 90 Flame Retardant T-shirt
100
5916 92 Flame Retardant Bra
103
6301 90 Flame Retardant Long Johns
101
5917 89 Flame Retardant Tank Top / Sport Bra
103
Flame Retardant Underwear Balaclava / Hood T-Shirt Flame Retardant Long Sleeves 6304 90 Underwear T-shirt 6303 90
139 128,135,139
101
5918 92 Flame Retardant High Briefs
103
5919 92 Flame Retardant Briefs
103
6307 90 Flame Retardant Wool Hat
113
5920 92 Flame Retardant Short Zip Turtleneck
102
6308 90 Flame Retardant Balaclava
112
5930 92 Flame Retardant Long Johns
102
6310 90 Flame Retardant Boxer Shorts
101
103
6975 42 Long Sleeves T-shirt
140
RG0010 Insulating Gloves
110
6979 42 Turtleneck
140
RH0005 Poloshirt
141
7710 15 Boilersuit
137
RH0012 Sweatshirt
141
7712 15 Boilersuit
135
RH0021 T-shirt
141
7720 15 Work Jeans
137
RH0022 Sweatshirt
141
7725 15 Work Jeans
135
RH0023 Full Zip Sweatshirt
141
7728 15 Ladies Work Jeans
134
RH0026 Long Sleeves T-shirt
141
7729 15 Ladies work jeans
136
RH0027 T-shirt
141
7732 15 Jacket
137
RH0030 Ladies T-shirt
141
7741 15 Bib 'n' Brace
137
RH0033 Sweatshirt with Collar
141
7745 15 Bib 'n' Brace
135
RH0034 Fleece Jacket
139
7747 15 Bib 'n' brace
135
RS0003 Waistcoat
125
7748 15 Bib 'n' Brace
137
RS0004 Flame Retardant Hi-Vis Waistcoat
114
7751 15 Craftsman Trousers
137
RX0001 Safety Helmet Box Cl.1
112
7755 15 Craftsman Trousers
135
RX0018 Electric Arc Visor
7758 15 Ladies Craftsman Trousers
134
RX0021 Safety Helmet ARC 36
7759 15 Ladies Craftsman Trousers
136
RX0022 Flame Retardant neck and ear cover
37,112
7780 15 Shorts
137
SA0001 Electric Arc Hood + Visor + Helmet
37,112
7788 15 Work Shorts
137
37,112 112