162 PRODUCT GUIDE - LASERS & SP ECIAL EFFECTS
Showtacle Moncha.box Introducing the Moncha.box by Showtacle. If you need a laser controller with all the standard connectors, a small display that allows you to have direct access to the settings of the laser device, but you are not a laser manufacturer, then choose the Moncha.box. The Mocha.box console contains a small display and all of the old control features, which enables users to set configurations directly on the controller. Moncha.box supports the following interfaces: DMX in/out, Ethernet, ILDA out and SD-card. Moncha.box is the right answer if you don’t want to install a controller directly into the laser. www.showtacle.com
Swefog DURAMAX 1K8
Smoke Factory Spock Smoke Factory’s Spock delivers smooth fog output for the most demanding applications. With a volume reduction of up to 20dBa, compared to the 400W weaker Data II with 2,600W, the goal of volume reduction was more than achieved. Smoke Factory achieved this with the help of a new nozzle - a plate with many small holes instead of the usual end of the evaporator tube. New sensors make it possible to measure and control the temperature inside the heating element even more accurately. This ensures a constant temperature, which is necessary for a constant and above all safe evaporation of fluid. The second step for a constant fog output is the setting of the pumps. The Spock is equipped with two different fluid pumps for an even output. A small 24V pump takes over the fluid delivery up to a setting of 30% output. From then on, the fluid is pumped into the heating element by a larger 230V pump. This means that a very fine adjustment can also be made in the lower area. Equipped with a touch display many other settings can be adjusted. The Spock has RDM, via which the heating status and possible error messages can be output. In addition, the display always shows the current heating progress to see when the unit is ready for operation. The control takes place via all usual ways including ArtNet and sACN. www.smoke-factory.de
DURAMAX 1K8 is built into a durable flight case and uses the Smartbib fluid system which is leak-proof, prevents use of wrong fluid, increases shelf life, and is a more environmentally friendly packaging solution compared to traditional plastic cans. With precise variable haze density, both calm, unnoticeable atmospheric haze and dense moving clouds of fog are effects close to hand at tour with a single intellahazer. Highest output of all water based haze generators. The hazer can use three types of fog fluid; XTR (extra light), MD (medium), HD (High density), no manual settings required. Heavy-duty European-made, high quality flight case, made for touring and rental use. Bag-in-box fluid container 100% leak-proof. Can be stored and shipped in any position. Reduces plastic use with 75%. LED lluminated fluid compartment, for quick view of fluid level in bag. Full OMX control + 0-10V analog, PowerCon connector. Integrated drip tray with replaceable cloth keeps machine clean. www.swefog.com
X Laser Skywriter HPX M-2 The Skywriter HPX M-2 is the lower-power, lower-cost sibling of our most popular projector, the Skywriter HPX M-5. The Skywriter HPX M-2 is ideal for small and medium-sized productions where vibrant laser effects can stand out on their own, or be used to complement other effect lighting. Lighting professionals can easily integrate the M-2 into their lighting rigs, and control it in unison with the rest of their lighting, from just about any major console or lighting controller. The Skywriter HPX M-2 has 2W of full RGB laser power and can be used indoors or outdoors, in venues with audiences of up to 1,000 guests. The lower cost of the Skywriter HPX M-2 combined with our Mercury control system allows for large arrays of lasers with incredible capabilities, all controlled from a lighting console to create amazing cascading movement, dimmer and colour chases. www.x-laser.us
Tarm tarm DOT The tarm DOT multi effect laser projector is a white light pure diode solution with analog colour modulation and unique glass effects. This effect laser light comes with a guaranteed output power of 2,700mW. Multiple beam effects of the integrated gobo wheels can be selected, rotated and positioned via DMX: grating grid, machado, stars, dotted line, continuous line and even a micro star effect which looks like a real starry sky. Colour specifications, rotation and effects can be adjusted through a gobowheel. The zoom function allows a fourfold magnification of the bundled laser light. The laser systems have a compact housing, thus they’re easily integrated into existing lighting setups and established room concepts. www.tarm.com
www.mondodr.com