Page 1


Superior Beauty and Protection OIL-BASED FORMULA Protects floors with an amber-hued, ex-




On Oak Satin

tremely durable clear finish. Formulated specifically for high-traffic floors, this finish remains elastic, providing excellent scuff and scratch resistance. Ideal on the toughest high-use applications such as kitchens, hallways and gym floors. SemiGloss

WATER-BASED FORMULA Provides wood floors with superior, longlasting beauty and protection. This super-fast drying finish yields remarkable moisture resistance and stands up to marring, scuffing and wear in high-use areas. Ideal for use on all types of wood flooring such as oak, pine, fir, birch, aspen, maple, cypress, mahogany, redwood and even laminate.


S p e c i a l l y F o r m u l a t e d To B e Wa l k e d O n Formulated for long-lasting durability and ultimate scuff resistance, Cabot Floor Finish is the clear choice for enduring beauty and superior clarity. Developed with premium quality resins and components, the result is a floor finishing system that yields unsurpassed protection and truly professional results.

T E C H N I C A L DESCRIPTION Recommended Uses: Cabot PRO.V.T. covers previously painted or stained surfaces in just one coat, improving project completion time and maximizing labor efficiencies. Cabot PRO.V.T. is so advanced that it does not require the use of a primer coat on non-extractive-prone wood species such as pine, white cedar or cypress. In addition, this product has been developed and tested for use in colder temperatures, extending the exterior maintenance season for professionals in cooler climates. This versatile, fade resistant and water-repellent exterior stain provides superior results when applied on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Composition: Advanced 100% acrylic, richly pigmented, opaque stain. Finish: Dries to a flat finish. Colors: Available in high-hiding Ultra White #0812 and four bases for tinting to an unlimited color selection. Tinting/Intermixing: Cabot’s PRO.V.T. is available in four tint bases; White #0801, Neutral #0806, Deep #0807 and Medium #0808, that must be tinted with compatible universal colorants.


Coverage: On smooth surfaces covers approximately 300-400 square feet per gallon (7.4-9.8 square meters per liter) and on rough surfaces 200-300 square feet per gallon (4.9-7.4 square meters per liter). These rates will vary depending on the porosity of the surface. Packaging/Containers: Available in one-gallon and five-gallon containers. TECHNICAL DATA Cleanup and Disposal: Clean brushes and equipment with warm water and soap or detergent. Drying Time: Approximately 1 hour, recoat after 4 hours. Note that cold temperatures and/or high humidity may impede the dry time. Pigment Type: Titanium dioxide, iron oxide pigments, light-fast organic pigments and silica. Vehicle Type: 100% acrylic resin. V.O.C. Content: Maximum of 350 grams per liter (2.92 lbs./gal.). APPLICATION Surface Preparation: Proper surface preparation is the key to maximum stain performance.

Stirring: Stir thoroughly before and occasionally while using. If the job requires more than one container, or different batches are used, blend them together to ensure uniformity of color. Application Methods: Apply evenly with a brush or spray. Best results can be obtained by using a high-quality, synthetic bristle brush or airless sprayer. Always backbrush immediatly after each section is coated to ensure proper penetration. Apply stain to small sections at a time. To avoid lap marks, start at one edge and follow through to the end of the boards or to a natural break such as a door, window or corner. Dramatic color changes may require more than one coat. LIMITED WARRANTY If this product does not perform as stated on the label after you apply it according to label directions, Samuel Cabot Incorporated will either replace this product or refund its purchase price, at its option. Samuel Cabot Incorporated disclaims all other implied or express warranties. Samuel Cabot Incorporated will not provide or pay for labor for removal or application of the product. This warranty excludes all incidental or consequential damages. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Samuel Cabot Incorporated 100 Hale Street, Newbur yport, Massachusetts 01950 (800) US-STAIN www.cabotinter

Cabot Floor Finish Color Card  

Samuel Cabot Incorporated Floor Finish Color Card