147
ETSI EN 300 392-7 V2.3.1 (2006-06)
A.8.44 Location area selector The location area selector is used in conjunction with the location area bit mask element to provide an indication of location areas. Table A.75: Location area selector element contents Information element Location area selector
Length 14
Value any
Remark Bit pattern for comparison with local LA-id.
A.8.45 Location area list The location area list element provides a list of location areas. Table A.76: Location area list element contents Information element Length Type C/O/M Remark Number of location areas 4 1 M Location area 14 1 C See note. NOTE: The Location area element shall be repeated as many times as indicated by the Number of location areas element.
A.8.46 Location area range The location area range element provides a list of location areas that runs from Low Location Area value to High Location Area value. Table A.77: Location area range element contents Information element Length Low Location Area value (LLAV) 14 High Location Area value (HLAV) 14 NOTE: HLAV shall always be greater that LLAV.
Value 0 to 214-1 1 to 214-1
Remark Lowest value of LA-id for which CCK is valid Highest value of LA-id for which CCK is valid
A.8.46a Max response timer value The max response timer value element is used to set the maximum period over which an MS shall randomly choose a response time to a group addressed OTAR, key status or key association command. Table A.77a: Max response timer value element contents Information element Max response timer value
Length 16
Value 0
Remark Immediate response, for individually addressed transactions 1 to 216-1 Value in seconds from 1 to 65 535
A.8.47 Mobile country code See EN 300 392-1 [1], clause 7.
A.8.48 Mobile network code See EN 300 392-1 [1], clause 7.
ETSI