PORTFOLIO SELECTED WORKS FROM 2009-2013 MICHELLE LEE UNIVERSITY OF MELBOURNE BACHELOR OF ENVIRONMENT, MAJOR IN ARCHITECTURE
Architecture | Interiors | Facades & Detailing | Landscaping
Resume Contact Lee Qianning Michelle (Ms) Currently Residing in Singapore (+65) 91890169 leeqn.michelle@hotmail.com
Profile Age: 22 Nationality: Singaporean
Career Objective Seeking the best opportunity to further enhance present professional experience and expand knowledge base on architectural designs that exceeds my clients’ expectations.
Educational Background
2012-2013 University of Melbourne Bachelors of Environment, Major in Architecture •
Graduated with Honours
2009- 2012 Singapore Polytechnic Diploma in Architecture
•
Attained a GPA of 3.5
2004-2008 Bedok Green Secondary School GCE ‘O’ level
•
Attained distinction and good credits
GCE ‘N’ level
•
Attained 6 distinctions
Work Experience
Forum Architects Pte Ltd Duration April 2012- June 2012 Position/ Title Architectural Technician Responsibilities Preparation of architectural designs, Photoshopping of plans, Taking part in presentations, Going to site visits, Liaising with clients and suppliers, 3d render- ing of projects Singapore Tourism Board Duration Position/ Title Responsibilities
June 2011- April 2012 Masterplanning Project for Chinatown Collaboration with Singapore Tourism Board and was trained in design think ing, Introduction to Urban Design and Planning and Revit
CPG Consultants Pte Ltd. Duration March 2011- April 2011 Position/ Title Architectural Assistant Responsibilities Preparation of architectural designs, Photoshopping of plans, Taking part in presenta- tions, Going to site visits, Liaising with clients and suppliers, 3d rendering of projects, Master planning Singapore Civil Defence Force Duration Position/ Title Responsibilities
January 2011- March 2011 Model Maker Building of a single-storey SCDF & NFEC Emergency Preparedness Learning Centre model, in a team of 7, with reference to floor plan
SpaceCRAFT Architecture Studio Duration September 2010- September 2010 Position/ Title Model Maker Responsibilities Building of a two-storey semi-detached model, with partner, in accordance to Architect’s tender drawing
Participation and Acheivements 2012-2013
S.A.L.T.S- Students Arise Learning to Serve (University of Melbourne) Vice President • Gained leadership skills in planning orientation activities for freshman students • Improve in team work skills by working with members in the club
2012
Singapore Polytechnic Graduation Show 2012 Assigned as Graduation Book team
2011 Participated in 2011 Building and Construction Authority (BCA) Tropical Architecture Competition 2011
Participated in Revit Workshop and training session
2011
Participated in 2011 Evolo Skyscraper Competition
2011
Commendation for Architectural Project Model Completion • SCDF & NFEC Emergency Preparedness Learning Centre
2010
Collaborated with students from the University of Hong Kong • Gained valuable experience by interacting with the students
2010
Participated in Singapore Structural Steel Trophy Design Competition
Capabilities
Technical Skills • Proficient in Autodesk Autocad • Proficient in Autodesk Revit • Proficient in Google Sketchup • Proficient in 3ds Max • Proficient in Rhino and Grasshopper • Proficient in Adobe Photoshop, Illustrator and Indesign • Proficient in MS office Transferable skills • Good organization skills • Good command of both English and Mandarin • Able to work effectively in a team, both as a leader and a team member
Character Referees
References available on request
CONTENTS
12
24
WORK EXPERIENCE Spacecraft Architecture Studio Sunset Way, Singapore
25
Singapore Civil Defence Force Hill Street, Singapore
25
Singapore Tourism Board Masterplan of Chinatown
27
INTERNSHIP CPG Consultants Puteri Habour, Malysia
28
COMPETITIONS Building and Construction Authority Tropical Architecture
6
ACADEMIC PROJECTS Barlow Motors Car Showroom Undergraduate Design Studio 2013
8
Office Building Undergraduate Construction Design Module 2013
12
Wyndham Gateway Design Project Undergraduate Design Studio 2012
14
Two-Storey Landed Residential House Undergraduate Environmental Building Systems Module 2012
16
Dance Centre 3rd year of Diploma in Architecture 2011
18
Small Office Home Office (SOHO) 2nd year of Diploma in Architecture 2010
22
Eco House 1st year of Diploma in Architecture 2009
25
28
| Academic Projects
BARLOW MOTORS CAR SHOWROOM DESIGN Exhibition Street, Melbourne, Victoria
“Intergrating nature with the building form to allow interaction from the public.”
T
he vicinity of the site has a mix of commercial and residential buildings with a variation of building height. Open green spaces near the site (for example, Carlton Gardens) brings about greenery to the surroundings. The two main access to the site are from Mackenzie Street and La Trobe Street. Part of the site would be blocked by the high-rise commercial building along La Trobe Street during the noon due to the site facing towards the afternoon sun.
LOCATION PLAN
6 | Architecture Portfolio
The public and private spaces are separated from each other to give the offices privacy and to have a quiet area free from disturbance. Alternatively, the use of voids still allow interaction among people. Barlow and his son’s aim was to create a new building which would reflect their adventurous spirit. The three main key words of the design are form, facade and sustainability. To integrate nature which also allows interaction from the public, views are directed in the interior spaces but also towards Carlton Gardens which is a vicinity from the site. Different levels are also designed to create different experiences for the users. As one is dining at the alfresco dining, they are able to enjoy the view of the outdoor courtyard which allows natural light into the space. A roof garden and mini golf is also designed on the office level which further implement nature into the building.
In addition, a mezzanine ground level is designed to allow users to view the showroom on the ground floor and at the same time acts as a lounge space for the users. One main focal point of the car showroom is the use of curved green planters which wraps around the facade of the car park to allow to building to feel lighter which in turn arouse the interest of the public. Transparent car and passenger lifts are deliberately designed in the middle of the showroom to allow the public to see the cars being transported from the ground to the car showroom on the first level. The above ground carpark is mainly designed to showcase the space designing the structure to make it stand out.
GROUND FLOOR
Architecture Portfolio | 2
1ST FLOOR
Architecture Portfolio | 7
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT | Academic Projects
OFFICE BUILDING
Cardigan Street, Melbourne, Victoria
D 38.79
B
5800
DP
D 3
W 1
DP D 4
D 4
DP 5500
3500
B A6
3500
MEETING AREA F3 FFL 39.55
DP
NEW TREES TO BE PLANTED
WT3
4300
D 3
DP
WT2
1
EXHIBITION F3 FFL 39.55
DP
DP 0
5000
8500
WT1
10
CARDIGAN STREET
2A A8
ROOF TERRACE ABOVE
4900
D 2
CARPARK 1 5700
23 22 21 20 19 18 17 16 15 14
2
2600
WT1
3500
4920
3500
W 2
GRATTAN PLACE
3 A1
1 A7
STAIRCASE F3
ENTRANCE F2 FFL 39.55
CARPARK 2 UP 23 T= 250MM 24 R= 150MM
A A5 1545
3
DP
625
1
2
3
4
5
6
7
9 10 11 12 13
WT1
545
1000
RECEPTION
WT1
8
WT3
6355
2170 F1 FFL 39.55
D 1
6000
D 5
D 5
FW
FW
M.LAV
2000
STORE
F4 FFL 39.50
F4 FFL 39.50
KITCHEN
D 6
U
F4 FFL 39.50
DIS.LAV
F.LAV
F4 FFL 39.50
F4 FFL 39.50
WT4
2510
FW
WB
WT5
WB
WB
WC
WC
U
WC
WC
WC
FW
4
4250
3970
DP 2325
WT1
8500 38.54
2325
1800
5400
6500 15000
E
3600
D 5
DISABLED CARPARK
D 5 4960
5885
WT3
D 5
3050
4700
1200
W 3
A A5
1 A4.03
2600
F1 FFL 39.50
D 1
F
B A6
BOUNDARY TITLE
G 1 A2.01
T
GROUND FLOOR PLAN
he site is located in Cardigan Street, Carlton, Melbourne whereby the office is designed. Construction details are added to the office with specify selection of floors to walls to roof. With the wide range of different materials and structural systems, the chosen elements are important to help in acoustic and thermal insulation while maintaining the architectural aesthetics of the design intent.
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT 8 | Architecture Portfolio
38.76
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
13100
3200
A
39.09
3800
1200
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
C
2 A8
NEW TREE TO BE PLANTED
NEW TREE TO BE PLANTED
BOUNDARY TITLE
BOUNDARY TITLE
650
FCL 46.24 6740 OFFICE
F3 FFL 43.15
3085
D 1
1ST FLOOR FFL 43.10 3600
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT W 2
1430
250 UB 31
D 1
FCL 42.44 2940
2
STAIRCASE F3
ENTRANCE
D 3
2200
D 1
2175
F1 FFL 39.50
F2 FFL 39.55
3
EB
GROUND FLOOR FFL 39.50 0
EB CLASS P FILLED SITE
4
SECTION A-A
BOUNDARY TITLE
BOUNDARY TITLE
1 A3.01
3
4700
ROOF LEVEL RL 46.29 7510
COLOURBOND FLASHING TO SPECS COLOURBOND COPING TO SPECS Z PURLINS ON WELDED CLEATS AS PER ENGINEER'S SPECS 250 UB 31
FCL 46.21 6710
ROOF TERRACE
OFFICE
F7 FFL 43.20
W 3
3000
F1 FFL 43.15
1 A4.01
B 1
1ST FLOOR FFL 43.10 3600
250 UB 31
EXHIBITION
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
250 UB 31
F.LAV
ENTRANCE
F4 FFL 39.50
WT3
F2 FFL 39.55
F3 FFL 39.55
WT1
WT3
LYSAGHT KLIP-LOK 406 ROOF CLADDING SYSTEM TO MANUFACTER'S SPECS
D 4
D 2
D 6
WB
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
ROOF LEVEL FFL 47.11 7610
1
PRESTO LOCK METAL COPING COVER
1 A4.01
STAIRCASE F3
WC
FCL 45.99 2840
GROUND FLOOR FFL 39.50 0
FALL
CLASS P FILLED SITE
1 A3.02
SECTION B-B
Architecture Portfolio | 9
UCED BY AN AUTODESK EDUCATIONAL PRODUCT
| Academic Projects
OFFICE BUILDING 10
BOUNDARY TITLE
11 Cardigan Victoria PRODUCED Street, BY AN Melbourne, AUTODESK EDUCATIONAL PRODUCT 1
12
2 3
13
250 UB 31
21
4
Z20015
650
5
6
1430
14
250 UB 31
22 23
24
7
FCL 46.24 6740
FCL 42.44 2940
15 8
16
LEGEND 9
OFFICE
F3 FFL 43.15
3085
17
10
ENTRANCE
2290
11
F2 FFL 39.55
1ST FLOOR FFL 43.10 3600
250 UB 31
12
G
14
1430
13
FCL 42.44 2940
15 16
25
17
19 20
26
30
2
SARKING TO SPECS
3
PRESTO LOCK METAL COPING COVER
4
300MM WIDE STAINLESS STEEL BOX GUTTER ASSEMBLY FULLY SUPPORTED ON METAL DECK TRAY
5
50MM STYROFOAM IINSULATION
6
RONDO METAL STUD WALL TO MANUFACTURER'S DETAIL
7
(100X15)MM THK CEMENT GROUT WITH METAL LUG TO SPECS
8
RYLOCK FIXED DOUBLE GLAZED WINDOW TB SERIES
9
1800MM HIGH ZINC WALL PANELS IN ELEVATION
10
(600X600X20)MM THK CARPET TILES TO SPECS
11
120MMM THK 'BONDEK' CONCRETE FLOOR SLAB, 32MPA, SL92 IN TOP
12
(75X75)MM L PLATE TO ENGR'S SPEC
13
PLASTERBOARD CEILING SUPPORTED ON RONDO 'KEYLOCK' SUSPENDED CEILING GRID SYSTEM
14
12MM THK RONDO KEY LOCK CEILING PLASTERBOARD TO MANUFACTER'S DETAIL
15
260MM THK THERMOMASS-INSULATED CONCRETE SANDWICH PANEL
16
ALUMINIUM FRAME DOOR HEAD TO MANUFACTURER'S DETAIL
17
G JAMES 472 SERIES ALUMINIUM FRAME DOOR HEAD TO MANUFACTURER'S DETAIL
18
G JAMES 472 SERIES SINGLE ALUMINIUM FRAME HINGED DOOR MANUFACTURER'S DETAIL
ENTRANCE 2290
F2 FFL 39.55
26 GROUND FLOOR FFL 39.50 0
20
EB
SAFEBRIDGE THERMAL BREAK TAPE
22
50MM THK INSULATION
23
Z PURLINS ON WELDED CLEATS TO ENGINEER'S SPECS
24
120MM THK STIFFEN RAFT SLAB WITH SL82 REINFORCEMENT TOP AND BOTTOM TO ENGR'S SPECS
25 120MM THK STIFFEN RAFT SLAB WITH SL82 REINFORCEMENT TOP AND BOTTOM TO ENGR'S SPECS
25
19
21
26
CEMENT MOTAR TO SPECS
27
RONDO STEEL STUD TO ENGR'S DETAIL FIX AT 600MM MAXIMUM
28 15MM DIA BACKEROD TO SPECS
CLASS P FILLED SITE
29 12MM CEMENT SCREED TO SPECS 30
G JAMES 472 SERIES SINGLE ALUMINIUM FRAME HINGED DOOR MANUFACTURER'S DETAIL
31 260MM THK THERMOMASS INSULATED COMPOSITE SANDWICH PANEL 32 G JAMES 472 SERIES SINGLE ALUMINIUM SWING DOOR JAMB TO DETAIL
32
33
G JAMES 472 SERIES SINGLE ALUMINIUM SWING DOOR TO DETAIL
33
A4.03
10 | Architecture Portfolio PLAN 2 A4.01
PART SECTION PART SECTION B-BB-B
DETAIL
A4.03
FFL- FINISH FLOOR LEVEL RL- REDUCED LEVEL EB- EDGE BEAMS
GENERAL NOTES -ON SITE TREES ARE TO BE RETAINED
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
31
EB
LYSAGHT KLIP-LOK 406 ROOF CLADDING SYSTEM TO MANUFACTER'S SPECS
GROUND FLOOR 19 (600X600X20)MM THK MARBLE TILE TO SPECS FFL 39.50 0 20 (600X300X20)MM THK OUTDOOR CONCRETE PAVER
18
F1 FFL 39.50
1
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
18
50
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
SITE
1ST FLOOR FFL 43.10 3600
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
ONAL PRODUCT
12
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
11
3
1
4 5 6 7 8 2 3
10
4 5
11
6 7 8
9
9 11
2
OUTDURE® QWICKCLIP® TWIST CLIP
3
20 MM THK OUTDURE® ECO-DECKING®
4
OUTDURE® QWICKCLIP® STARTER/END CLIP
5
100MM WIDE DOWNPIPE TO MANUFACTER'S DETAIL
6
CEMENT SCREED TO FALL 1:100 GRADIENT
7
300MM WIDE CONCRETE GUTTER
8
SETTLING BLOCK TO SPECS
9
260MM THK THERMOMASS INSULATED COMPOSITE SANDWICH PANEL
10
SPIRALPAVE® ADJUSTABLE DECK SUPPORT
11
120MMM THK 'BONDEK' CONCRETE FLOOR SLAB, 32MPA, SL92 IN TOP
12
PLASTERBOARD CEILING SUPPORTED ON RONDO 'KEYLOCK' SUSPENDED CEILING GRID SYSTEM
13
12MM THK RONDO KEY LOCK CEILING PLASTERBOARD TO MANUFACTER'S DETAIL
12
3 A4.02
3
ROOF TERRACE DETAIL
ROOFA4.02 TERRACE DETAIL 2 3
4 5
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
11
2
12MM THK TAMPERED GLASS TO SPECS
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
10
1
1
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
1
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
LEGEND
6 7 8
FFL- FINISH FLOOR LEVEL RL- REDUCED LEVEL EB- EDGE BEAMS
Architecture Portfolio | 11
GENERAL NOTES
| Academic Projects
WYNDHAM GATEWAY DESIGN PROJECT Along Princes Highway, Melbourne, Victoria
“To replicate a visual image that represents the character of the site.”
T
he main aim of the project was to create a gateway into Wyndham for city bound traffic on the Princes Freeway. The design of an exciting, eye catching installation at Wyndham’s Western Gateway was mainly to be viewed by motorist travelling at high speed providing them the first indication of arrival into metropolitan Melbourne. The purpose of the freeway art installation is to develop a proposal that inspires and enriches the municipality. To replicate a visual image that represents the character of the site, movement are created by having a variation in density of lines and heights. The weaving of lines showing from left to right into different frames is similar to the motorists driving on the highway whereby roads have bends at different points. This shows a sense of movement by translating it into the weaving of wires used in the model.
12 | Architecture Portfolio
The lines in the model are weaved from top to bottom or vice versa. This is to show the wrapping of lines around the profiles to give a dynamic flow. The weaving is similar to highways as it has different loops to enter it which gives a sense of motion and speed as it weaves from the top down to the bottom. Seen in the physical model, density of lines reflects lines in a long exposure traffic. These lines in the model thus emphasizes on the density and flow of the traffic in a highway. As the density of highways are usually high, the use of lines are shown in the model whereby the holes are placed together densely. Using the australian livestock fence as an identity to the site, the materials used in the design are similar where the structural frames of the design and made of wood and steel wires are used to weave through the frames. In addition, the nature of a spider web is being seen in the model where there is an idea of ‘growing’ from a point of origin. The growing idea embraces the landscape and nature surrounding it. Thus the installation is placed where it embraces nature with it.
Architecture Portfolio | 13
| Academic Projects
TWO-STOREY LANDED RESIDENTIAL HOUSE Benjamin Street, Melbourne, Victoria
T
he house was designed for a family of four who wants a comfortable home that has less impact on the environment which includes minimising the use of energy, water, resources and is cost efficient to live in. Given the design of the house, the orientation of the house was proposed on the site along Benjamin Street in Melbourne.The lounge and dining spaces are placed facing towards the north to allow maximiun sunlight which also includes the verendah to give privacy to the users as it is located away from the main street. Windows to the south are designed generally smaller to minimise winter heat loss. Heavyweight construction is used for the house to imrov thermal comfot and reduce operational energy use. To achieve summer comfort, passive cooling is implemented too allow cross ventilation across the house. To provide sufficient acoustic and thermal in-
14 | Architecture Portfolio
sulation to the house, fibreglass is used as an insulation material for the ceiling. Shading is relatively important in the east west facing rooms to avoid overheating of windows. Timber venetians blinds are installed to shade the bedrooms, lounge, dining and kitchen spaces and also give a natural feel to the spaces. The use of skylight bring in natural light and the use of skylight shading are used during summer to shade unwanted heat and light allowing the space to be cool. The use of a grey water and rainwater collection tank placed outside the house allow the water to be treated being being reused. Rain water can be reused for flushing of water closets, laundries or for watering of plants. Grey water can be reused for water of plants.
Architecture Portfolio | 15
| Academic Projects
DANCE CENTRE
ARMENIAN STREET, SINGAPORE “The juxtapositioning of spaces and having connections between the public and the dancers.”
T.H.E
Dance Company’s aim is to create a building that reflects its unique function as a dance centre and to focus on the experience and expression of movement and create space that inspire learning and creativity. Set in the Central Business District of Singapore and within walking distance from numerous historical sites, monuments and educational institutions, its main concept is to use the juxtaposition of forms to allow the exploration of movement of a dancer. The vast use of curtain walls in spaces facing the busy main road is to allow maximium connections between the public and dancers. In addition, it is also to make the best use of views and allow access to natural daylight. Seen in the overall perspective view of the dance centre above, the dance studio is rotated away from the resource centre to show dynamismof the two forms. Metal cladded panels are used for the blackbox to give a sense of uniqueness and allow users to identify it.
16 | Architecture Portfolio
1ST STOREY PLAN
Designed around the entrance of the building, an open plaza with an informal stage is placed mainly to attract the public. Located on the 2nd floor, there is a viewing deck with allows users on the upper floor to look over to the performances. By placing the alfresco dining near the substation, it allows connections between people to promote interaction. The two main feature spaces of the building are the dance studios and resource centre. Spacious and naturally ventilated, the dance studios has a high ceiling designed with glass blocks being used as the facade. These glass blocks are placed allowing a certain distance from each other to allow air flow and at the same time acts as an acoustic barrier. Users from the lift lobby are able to take a peek into the dance studios. The resource centre allow views towards the busy central business district which the facade are cladded with curtain wall. From the higher floor of the resource centre, they are able to interact with each other. Thus, the resource centre is designed whereby the higher floor is mainly for the public while the lower floor is for the dancers. In addition, the use of a skylight allow natural daylighting into the space which saves on the energy of the building.
Top: Close-up render of open plaza, resource centre and dance studio Bottom: Render of double volume resource centre (Both using Revit)
Architecture Portfolio | 17
| Academic Projects
SMALL OFFICE HOME OFFICE (SOHO) ALEXANDRA ROAD, SINGAPORE
Top: Render of living area Bottom: Render of bedroom and balcony (Both using Sketchup and V-Ray)
“Experiencing tranquility within living spaces.�
H
aving a painting artist who requires a large and condusive work area for him to paint his work, the three main strategies of the apartment are to allow the office to be facing greenery, having a spacious work area and at the same time a clear segregation between work and living spaces.
18 | Architecture Portfolio
connector facing north of the site would be a refreshing view for the resident, allowing him to gain inspiration while enjoying the view. Due to an overhead bridge located in front of the building, the blocks are designed slanted to create privacy. Pockets of green planter boxes are also implemented to the facade to help with the problem of privacy.
By placing planter boxes located directly outside the units, it allows direct visual communication with nature. In addition, creepers are designed along the communal shelthered terrace allowing users to experience greenery all around which also adds a depth to the facade. To allow minimum energy use, sun shading devices such as timber fins and aluminium awnings are implemented to provide shade to the apartments. The interior of the apartment is finished modestly. Warm finishes are selected with minimal detail which allows the resident to feel closer to nature.
Architecture Portfolio | 19
| Academic Projects
TOLIET PLAN
DETAILS OF PRECAST COMPONENTS A variety of components can be fabricated from precast concrete to meet a range of project needs. Precast components can be customized in different shapes and sizes to meet specific programmatic needs. Firstly, pilings and pile caps are being placed to support the structure in poor soil conditions. Next the ground beams and slabs are casted on site. Precast columns are then placed on the cast in-situ slab. Then, the precast beams are placed which are supported by the columns. The precast beams
20 | Architecture Portfolio
TOLIET SECTION
then support the slab. Precast planter boxes and slab components for the balcony are then being joint to the neighbouring slab using a wet joint. After that, precast walls are to be fixed on the slab. Lastly, the windows and door frames and green wall system are fixed. The green roof slab is cast in situ. The toliet and roof is using a half slab system to allow water to screed and at the same time help to hide the pipes. Water will be pumped from the pump
room to the storage tank to allow it to be transferred to the water ducts to the units on every floor. The units would have an electric heater which instantaneously heats up water for the shower. A water harvesting system is used to allow water from the planter boxes to collect into a water tank underground which is then pumped up to the units as water for flushing of water closets.
DETAIL OF GLASS BALUSTRADE AND GREEN WALL
DETAIL OF ALUMINIUM AWNING
DETAIL OF ROOF GARDEN
DETAIL OF BALCONY SLAB
Architecture Portfolio | 21
| Academic Projects
ECO HOUSE
PASIR RIS, SINGAPORE “Allowing nature to evolve into an interactive space.”
Top: Overall render of the house Bottom left: Render of open courtyard Bottom right: Render of living area looking out towards swimming pool (Both using 3DS Max)
22 | Architecture Portfolio
T
he design approach for this house is sustainable and is planned carefully according to it’s climatic reponses allowing natural daylight into the rooms. Nature is seeped into the spaces and less enclosures are used. Exterior and interior spaces are interconnected to allow interaction among users. Placed in the middle of the house, the open courtyard invites natural daylight and acts as a main focal point. The openess of the home is carried through the first floor. Large timber sliding doors open to the pond which helps to bring cool air into the space. The stepping stones connects the pond to the swimming pool. Weighing openness and enclosure, timber louvers are used to bring air into the space through the roof. Another focal point of the house is the open terrace on the 2nd floor of the house. Timber fins are used to allow ventilation where sunlight is able to enter the space through the open courtyard allowing the users to feel closer to nature. An open dining area is located on the 1st floor to allow users to have an alternative dining experience which they can have on the 2nd floor. Large timber casement windows are also designed in the master bedroom to allow maximium ventilation. To provide privacy to the users, vast amount of greenery and water features are placed around the house to block off unwanted views and sounds. In addition, designed with a glass trellis roof, services are placed to the back of the house to give users a welcoming entrance.
Architecture Portfolio | 23
| Work Experience
SPACECRAFT ARCHITECTURE STUDIO SUNSET WAY, SINGAPORE
L
ocated on the western end of Singapore, the two storey residential property sits in Sunset Way. Vast use of glass panels are used for the design of the house to maximise and frame important views. The model is built to its intricate details with the use of cardboard and perspex.
24 | Architecture Portfolio
SINGAPORE CIVIL DEFENCE FORCE HILL STREET, SINGAPORE
S
ituated in the bustly city in Hill Street, the architectural model project was built for Singapore Civil Defence Force and National Fire and Civil Emergency Preparedness Council’s upcoming Emergency Preparedness Learning Centre (EPLC). The model was made of white arcylic and laser cut in 1:50 scale. Led lights were then installed in the base of the model and different areas of the rooms could be lighted up separately. Architecture Portfolio | 25
| Work experience
RE-ENVISIONING CHINATOWN
COLLABRATION WITH SINGAPORE TOURISM BOARD, MASTERPLAN FOR
T
he materplanning project for Chinatown was a collaboration with Singapore Tourism Board together with different small teams of students to analysis the current city plan of Chinatown in Singapore. Different zones were catergorized and mapped out with various activities and place of interests around the area. By interviewing the people around Chinatown, there were many new insights of how Chinatown could be improved and revamped. Re-envisioning Chinatown has allowed us to be trained in design thinking, introduction to Urban Design and Planning and Revit.
26 | Architecture Portfolio
| Internship
CPG CONSULTANTS PTE LTD PUTERI HABOUR, MALAYSIA
Top: Overall 3d of units Bottom: 3d of one bedroom and two bedroom apartment (Both using Google Sketchup)
T
he site is situated in Puteri Habour, Johor Bahru, a world-class integrated waterfront precinct and marina, affording a panoramic view of the Straits of Johor. Inspired by tropical valleys and terraced rice fields, Puteri Habour is a waterfront mixed development with residential, serviced apartments and commericial components. The residential units are designed as villas in the sky, fringed with verdant planters and generous balconies.
Architecture Portfolio | 27
| Competitions Competition Projects
BUILDING AND CONSTRUCTION AUTHORITY (BCA) TROPICAL ARCHITECTURE COMPETITION
T
he aim of the competition is to promote tropical climate sustainable design and how it will require a different approach to temperate climatic green design incorporating innovative material use, local climatic and community considerations.
The chosen site has a relatively flat and open land which sits directly adjacent to the coast which divides Singapore and the state of Malaysia. It is situated at the furthest end of punggol where a single route leads into the beach. The beach is the main visual focal point of the site.
A hunt for an under-developed site allowed us to search into the extreme outskirts of Singapore. Till this date, Punggol point has preserved its vast array of natural features. Despite ‘Punggol 21’ initiative in the late 90s, punggol point has not been featured in upgrading plans.
In exploration of the site, eight massing blocks was designed with the intention of encouraging interaction with the neighbours. The houses are designed in a linear fashion with each of them set apart by not more than 25 metres. To further allow interaction, a variety of communal activities were implemented
within the 25 metres of buffer space. To fully capture the panoramic view of the sea, the houses are placed strategically to allow users to have a view from all the houses and also allow maximum sea breeze which creates cross ventilation within the spaces. By designing the houses around the exisiting trees on the site, less environmental impact was caused. In addition, a continuous water body was created to allow evaporative cooling towards the houses and communal interactive spaces. These water bodies would also act as a water catchment to harvest water which could be re-used.
| Competitions
As water is collected in the water catchment with the use of natural filtration such as aggregates, it allow perculation of water to the underground storage tank. The water collected would then be pumped for irrigation or for flushing of water closets. The use of overhangs and sliding shutters on the facade help to block off direct solar radiation entering the interior spaces. It also acts as a screen from rain or direct sunlight entering the spaces. The use of layering effect of floor slabs and roof depicts the features of the malay kampong houses to allow natural ventilation are the floor slabs are raised above the ground.
THANK YOU FOR VIEWING MY WORKS CONTACT MICHELLE LEE (+65) 91890169 leeqn.michelle@hotmail.com