CHLORINE DOSING BY ORP CONTROL 4.4 KEYPAD COMMAND KEY (depending on the model)
FUNCTION • Switch on the electronics unit. A few minutes after switching on, chlorine dosing and pH regulation start automatically, provided that these functions are not disabled, and certain alarms have not been activated. • Switching off the electronics unit (press and hold), provided that no alarm or alert is activated. When switching it off, the screen and the green LED turn off, and the red LED comes on. • Access the menus.
MENU
BOOST
Direct access via the «Dosing - manual Injection» menu (see chapter 4.6.4). • Water temperature displayed for a few seconds (only if the default display is set to « In-line display »). • Direct access to the «Settings - Temp. Calibration» menu (press and hold).
T°C
None.
SALT
Direct access to the « Ph regulation - calibration » menu (press and hold).
pH
h
Select a value or data item.
i
• Cancel a command. • Back to the previous (sub)menu. • Acknowledge an alarm or alert (press or press and hold, depending on the alarm or alert).
OK
• Command confirmation. • Enter a (sub-)menu. • Acknowledge an alarm or alert (press or press and hold, depending on the alarm or alert).
10 WWW.NORSUP.EU
Alterations which serve the technological progress as well as errors excepted!
