4.4 Keypad

4.4 KEYPAD COMMAND KEY (depending on the model) FUNCTION

MENU

• Switch on the electronics unit.

A few minutes after switching on, chlorine dosing and pH regulation start automatically, provided that these functions are not disabled, and certain alarms have not been activated.

• Switching off the electronics unit (press and hold), provided that no alarm or alert is activated.

When switching it off, the screen and the green LED turn off, and the red LED comes on.

• Access the menus.

BOOST Direct access via the «Dosing - manual Injection» menu (see chapter 4.6.4).

T°C • Water temperature displayed for a few seconds (only if the default display is set to « In-line display »). • Direct access to the «Settings - Temp. Calibration» menu (press and hold).

SALT None.

pH Direct access to the « Ph regulation - calibration » menu (press and hold).

h

i

OK 

Select a value or data item.

• Cancel a command. • Back to the previous (sub)menu. • Acknowledge an alarm or alert (press or press and hold, depending on the alarm or alert).

• Command confirmation. • Enter a (sub-)menu. • Acknowledge an alarm or alert (press or press and hold, depending on the alarm or alert).