Cisco ISR4451-X/K9 Datasheet

Cisco ISR4451-X/K9 Datasheet

CISCO ISR 4000 SERIES ROUTER DATASHEET ROUTER-SWITCH.COM YEJIAN TECHNOLOGIES CO., LIMITED | HONG KONG 0

Content Overview ................................................................................................................................................................................ 2 Quick Specs.................................................................................................................................................................... 2 Product Details.............................................................................................................................................................. 4 The Modules, Cards, Licenses & Accessories .................................................................................................... 9 Compare to Similar Items ...................................................................................................................................... 11 Specification....................................................................................................................................................................... 13 Cisco ISR4451-X/K9 Specification................................................................................................................ 13 FAQ ....................................................................................................................................................................................... 16 Source .................................................................................................................................................................................. 19

Contact Us Tel: +1-626-239-8066 (USA) +852-3050-1066 / +852-3174-6166 / +852-9795-4940 (Hong Kong) Fax: +852-3050-1066 (Hong Kong) Email: cisco@router-switch.com (Sales Inquiries) ccie-support@router-switch.com (CCIE Technical Support) 1

Overview Cisco 4451 Integrated Services Router, named as ISR4451-X, which supports 2 Enhanced servicemodule (SM-X) slots, delivers 1 Gbps to 2Gbps aggregate throughput. This router also supports two kinds of DDRM, data plane and control/services plane, which make administrator easy to manage the router.

Quick Specs Figure 1 shows the appearance of Cisco ISR4451-X/K9.

2

Table 1 shows the Quick Specs.

Product Code

Cisco ISR4451-X/K9

Aggregate Throughput

1 Gbps to 2Gbps

Total onboard WAN or LAN 10/100/1000 ports

4

RJ-45-based ports

4

SFP-based ports

4

Enhanced service-module (SM-X) slot

2

NIM (Network Interface Modules) slots

3

Onboard ISC slot

1

DDRM (data plane)

2 GB (default) / 2 GB (maximum)

DDRM (control/services plane)

4 GB (default) / 16 GB (maximum)

Flash Memory

8 GB (default) / 32 GB (maximum)

Power-supply options

Internal: AC, DC (roadmap) and PoE

Rack height

2 RU

Dimensions (H x W x D)

88.9 x 438.15 x 469.9 mm

3

Product Details Figure 2 shows the front panel of Cisco ISR4451-X/K9.

Note:

① AC power supply unit (PSU0)

④ Router power On/Off switch

② Router fan tray

⑤ LEDs

③ AC power supply unit (PSU1) ·Router fan tray is hidden behind removable bezel. ·LEDs include 12 indicators.

4

Table 2 shows the LED descriptions.

LEDs

Represents

Color

Description

Green

PSU is on and is providing power.

Amber

PSU is on but with errors or in a failure condition.

Off

Power supply is turned off.

Green

PSU is installed and providing power

Amber

PSU is installed but in a failure condition.

Off

PSU is off.

Blinking

Compact flash/eUSB flash is present and currently

Green

being accessed.

Solid

All temperature sensors in the system are within

green

acceptable range.

Power Supply Unit (P0 PSU and P1) Status

Internal PoE Daughter GE POE Card Status

FLASH

TEMP

System Flash Status

Temperature Status

One or more temperature sensors in the system Amber are outside the acceptable range.

PWR

System Power

Off

Temperature is not being monitored.

Green

System power is on and functioning correctly.

5

LEDs

Represents

Color

Description

Green

System power is in the process of shutting down.

blinking System power is up, but low level initialization Amber failed.

Amber

System power is up, but the system failed to

blinking

come out of reset.

Off

System power is off.

Two PoE power supplies are installed and

Green operating in boost mode.

This can mean one of the following: POE

Power Over Ethernet ·No PoE PSU installed.

BOOST

Boost Mode Off

·One PoE PSU installed. ·Two PoE PSUs installed and operating in redundant mode.

ISC

Green

PVDM4 is present and enabled.

Amber

Initialized with error.

ISC Slot Status

6

LEDs

FAN

Represents

Fan Status

Color

Description

Off

Not present.

Green

All fans are operating.

Amber

One fan has stopped working.

Blinking

Two or more fans have stopped working, or the

Amber

fan tray has been removed.

Off

Fans are not being monitored.

Solid

System operating normally.

green Blinking

BIOS/Rommon is booting.

amber STAT

System Status

BIOS/Rommon has completed booting, and Amber

system is at Rommon prompt or booting platform software.

System is not out of reset or BIOS image is not

Off loadable.

7

Figure 3 shows the back panel of Cisco ISR4451-X/K9.

Note: ① USB Type A port

⑤ Auxiliary port

② GE management port

⑥ GE Ports

③ USB Type B mini port

⑦ NIM Slots

④ Console port

⑧ SM-X Slot

·The NIMs support 2 single-wide or 1 double-wide. ·The GE Ports include 4 RJ45 ports and 4 SFP ports.

8

The Modules, Cards, Licenses & Accessories Cisco ISR4451-X/K9 is one of the Cisco 4000 series routers, which support new modules & cards slots, such as NIM, ISC, etc. Besides, Cisco ISR4451-X/K9 can upgrade by licenses.

Table 3 shows some recommended modules, cards, licenses and several cables.

Items

Models

Descriptions Cisco CAB-SS-449FC RS-449 Cable, DCE Female to

CAB-SS-449FC Smart Serial, 10 Feet Smart Serial Cables Cisco CAB-SS-V35FC V.35 Cable, DCE Female to CAB-SS-V35FC Smart Serial, 10 Feet Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 CAB-AUX-RJ45 and DB25M CAB-ETH-S-RJ45

Cisco Router Cable CAB-ETH-S-RJ45

Console and Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with Auxillary Cables

CAB-CONSOLE-RJ45 RJ45 and DB9F Cisco CAB-CONSOLE-USB Console Cable 6 ft with CAB-CONSOLE-USB USB Type A and mini-B

9

Items

Models

Licenses

L-SL-44-APP-K9=

Descriptions Cisco ISR 4431/4451 AppX license L-SL-44-APPK9= with WAAS/vWAAS 1300/2500 conns RTU Cisco Fourth-Generation Multiflex Trunk Voice and

NIM-1MFT-T1/E1 WAN network interface module Cisco Multiflex Trunk Voice and WAN network NIM-2CE1T1-PRI interface module Analog voice network interface card (ear and NIM-4E/M Network Interface

mouth)

Modules

Cisco Analog voice network interface card NIMNIM-2FXS 2FXS Cisco Analog voice network interface card NIMNIM-2FXS/4FXO 2FXS/4FXO Cisco Fourth-Generation Multiflex Trunk Voice and NIM-8MFT-T1/E1 WAN network interface module

SFPs for On-Board

Cisco GLC-LH-SMD 1000BASE-LX/LH SFP GLC-SX-MMD

GE Ports

transceiver module, MMF/SMF, 1310nm, DOM

10

Items

Models

Descriptions Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver

GLC-LH-SMD module, SMF, 1550nm, DOM Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver GLC-ZX-SMD module, MMF, 850nm, DOM

Compare to Similar Items Models

ISR4451-X/K9

ISR4431/K9 ISR4351/K9

ISR4331/K9

ISR4321/K9

Aggregate

1 Gbps to 2

500 Mbps

200 Mbps to

100 Mbps to

50 Mbps to

Throughput

Gbps

to 1 Gbps

400 Mbps

300 Mbps

100 Mbps

4

4

3

3

2

4

4

3

2

2

4

4

3

2

1

Total onboard WAN or LAN 10/100/1000 ports RJ-45-based ports SFP-based ports

11

Models

ISR4451-X/K9

ISR4431/K9 ISR4351/K9

ISR4331/K9

ISR4321/K9

2

0

2

1

0

NIM slots

3

3

3

2

2

Onboard ISC slot

1

1

1

1

1

Rack height

2

1

2

1

1

Enhanced service-module slots

12

Specification Cisco ISR4451-X/K9 Specification Aggregate Throughput

1 Gbps to 2Gbps

Total onboard WAN or LAN 10/100/1000 ports

4

RJ-45-based ports

4

SFP-based ports

4

Enhanced service-module slots

2

Doublewide service-module slots

1 (assumes no singlewide SM-X modules installed)

NIM slots

3

OIR (all I/O modules)

Yes

Onboard ISC slot

1

Default memory double-data-rate 3 (DDR3) error-

NA

correction-code (ECC) DRAM (Combined control/services/data planes) Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) 13

NA

Cisco ISR4451-X/K9 Specification Default memory DDR3 ECC DRAM (data plane)

2 GB

Maximum memory DDR3 ECC DRAM (data plane)

2 GB

Default memory DDR3 ECC DRAM (control/services plane)

4 GB

Maximum memory DDR3 ECC DRAM (control/services

16 GB

plane) Default flash memory

8 GB

Maximum flash memory

32 GB

External USB 2.0 slots (type A)

2

USB console port -type B mini (up to 115.2 kbps)

1

Serial console port - RJ45 (up to 115.2 kbps)

1

Serial auxiliary port - RJ45 (up to 115.2 kbps)

1

Power-supply options

Internal: AC, DC and PoE

Redundant power supply

Internal: AC, DC and PoE

AC input voltage

100 to 240 VAC autoranging

AC input frequency

47 to 63 Hz

AC input current range, AC power supply (maximum)

7.1 to 3.0A

14

Cisco ISR4451-X/K9 Specification AC input surge current

<50 A

Typical power (no modules) (watts)

158

Maximum power with AC power supply (watts)

450 (no PoE)

Maximum power with PoE power supply (platform only)

1000 with PoE redundant

(watts)

1450 with PoE boost no redundancy

Maximum endpoint PoE power available from PoE power

500 W with optional redundancy

supply (watts) Maximum endpoint PoE power capacity with PoE boost (watts)

15

950 W no redundancy

FAQ Q: Where do I position the Cisco 4451-X in comparison to the Cisco 3900 Series ISRs and the ASR 1000 Series Aggregation Services Routers?

A: The Cisco 4451-X is positioned for high-end enterprise branch offices or enterprise headend where there is a performance requirement of 1 to 2 Gbps with services. Performance-wise the Cisco 4451-X is positioned between the 3945E ISR and the ASR 1001.

Q: How many dual inline memory modules (DIMMs) does the Cisco ISR4451-X/K9 have?

A: The Cisco ISR4451-X/K9 have three DIMM slots. Two slots are used for control-plane and one slot for data-plane memory.

Q: What type of backplane is used between components in the Cisco ISR4451-X/K9?

A: The 4000 Series uses multigigabit fabric (MGF) for Layer 2 connectivity between the modules. On the 4451-X, the MGF can provide either 2 Gbps to all NIM slots or up to 10 Gbps to all SM-X slots.

The MGF is completely nonblocking and can forward in excess of 50 Gbps.

Q: Is the Cisco ISR4451-X/K9 power supply field-replaceable units (FRUs)?

16

A: Yes. The power supply can be replaced in the field.

Q: Is the Cisco ISR4451-X/K9 power supply hot-swappable?

A: Yes. You do not need to power down the chassis to insert or remove a power supply. Also, unlike the 3900 Series ISRs, the bezel and fan tray can remain in place while a power supply is replaced.

Q: What are the power options for PoE on the Cisco ISR4451-X/K9?

A: The Cisco ISR4451-X/K9 has two PoE options. Two of the FPGE interfaces can be powered with the addition of a dedicated power-conversion module installed into the system (PWR-GE-POE4400). This module does not require a higher-capacity system power supply and will work with the default power supply. The PoE power for the FPGE ports is completely independent from PoE power to the rest of the system.

Q: What is the difference between PoE Redundancy mode and PoE Boost mode?

A: Both modes require that two power supplies be installed in the Cisco 4451-X or 4431. Redundancy mode provides backup PoE power to the chassis; full PoE power will be available in the event of a single power supply failure. PoE Boost mode provides double available PoE powerâ&#x20AC;&#x201D;the maximum

17

amount of power from both power supplies combined—meaning that if a single power supply fails the second redundant power supply will be cut in half.

Q: With redundant power supplies, can we switch the power to primary when it fails and the router is running on the secondary power supply?

A: There is no concept of primary or secondary power supply for the Cisco 4451-X and 4351. The power supplies are simply redundant, so that when one fails the other power-supply unit (PSU) takes over by transparently providing power to the entire system. No switching or intervention is required.

Both share the load when running in the system; however, when one fails the other provides power to the complete unit. When the failed PSU is replaced with a new PSU in the system, the two power supplies are redundant.

Q: Can the Cisco 4000 Series ISRs handle the failure of a fan?

A: Yes, for systems with multiple fans (4331 and above). A fully loaded system will function normally below 6000 feet (1.82 km) with a single fan failure. If the ISR is above 6000 feet and in 32ºF (or 0ºC) temperatures it may shut down because of overheating. The system is rated to operate in 32ºF temperatures at up to 10,000 feet (3.05 km).

18

Failure of a power-supply fan will likely result in overheating and shutdown of the power supply. If power redundancy is required, you should install two power supplies in a 4451-X or 4431.

Q: Is a console port available on the Cisco 4000 Series?

A: The Cisco 4000 Series has the option of the regular RJ-45 console port as well as the USB console port. As with the ISR G2 routers, only one console port can be used at a time, with preference given to the USB console port. The Cisco 4221 router has a combo RJ-45 port for AUX and Console.

Source http://www.router-switch.com/cisco-isr4451-x-k9-p-5293.html

19