Cisco ISR4431/K9 Datasheet

Cisco ISR4431/K9 Datasheet

CISCO ISR 4000 SERIES ROUTER DATASHEET ROUTER-SWITCH.COM ROUTER SWITCH LIMITED | HONG KONG 0

Content Overview ................................................................................................................................................................................ 2 Quick Specs.................................................................................................................................................................... 2 Product Details.............................................................................................................................................................. 4 The Modules, Cards, Licenses & Accessories .................................................................................................... 9 Compare to Similar Items ...................................................................................................................................... 11 Specification....................................................................................................................................................................... 13 Cisco ISR4431/K9 Specification..................................................................................................................... 13 FAQ ....................................................................................................................................................................................... 16 Source .................................................................................................................................................................................. 19

Contact Us Tel: +1-626-239-8066 (USA) +852-3050-1066 / +852-3174-6166 / +852-9795-4940 (Hong Kong) Fax: +852-3050-1066 (Hong Kong) Email: cisco@router-switch.com (Sales Inquiries) ccie-support@router-switch.com (CCIE Technical Support) 1

Overview Cisco 4431 Integrated Services Router, which supports 3 Network Interface Modules (NIM) slots, delivers 500 Mbps to 1 Gbps aggregate throughput. This router also support two kinds of DDRM, data plane and control/services plane, which make administrator easy to manage the router.

Quick Specs Figure 1 shows the appearance of Cisco ISR4431/K9.

2

Table 1 shows the Quick Specs.

Product Code

Cisco ISR4431/K9

Aggregate Throughput

500 Mbps to 1 Gbps

Total onboard WAN or LAN 10/100/1000 ports

4

RJ-45-based ports

4

SFP-based ports

4

NIM (Network Interface Modules) slots

3

Onboard ISC slot

1

DDRM (data plane)

2 GB (default) / 2 GB (maximum)

DDRM (control/services plane)

4 GB (default) / 16 GB (maximum)

Flash Memory

8 GB (default) / 32 GB (maximum)

Power-supply options

Internal: AC, DC, and PoE

Rack height

1 RU

Dimensions (H x W x D)

43.9 x 438.15 x 507.2 mm

Package Weight

20.88 Kg

3

Product Details Figure 2 shows the LEDs on the front panel of the Cisco ISR4431/K9.

Note:

① Power supply unit

③ Router power On/Off switch

② LEDs

④ Optional power supply unit

·LEDs include 12 indicators.

4

Table 2 shows the LED descriptions.

LEDs

Represents

PSU

Power Supply Unit (P0 Green

PSU is on and is providing power.

and P1) Status

Amber

PSU is on but with errors or in a failure condition.

Off

Power supply is turned off.

GE POE

FLASH

TEMP

Color

Description

Internal PoE Daughter Green

PSU is installed and providing power

Card Status

Amber

PSU is installed but in a failure condition.

Off

PSU is off.

Blinking

Compact flash/eUSB flash is present and

Green

currently being accessed.

Solid

All temperature sensors in the system are within

green

acceptable range.

Amber

One or more temperature sensors in the system

System Flash Status

Temperature Status

are outside the acceptable range.

PWR

System Power

Off

Temperature is not being monitored.

Green

System power is on and functioning correctly.

5

LEDs

Represents

Color

Description

Green

System power is in the process of shutting down.

blinking Amber

System power is up, but low level initialization failed.

POE

Power Over Ethernet

BOOST

Boost Mode

Amber

System power is up, but the system failed to

blinking

come out of reset.

Off

System power is off.

Green

Two PoE power supplies are installed and operating in boost mode.

Off

This can mean one of the following: ·No PoE PSU installed. ·One PoE PSU installed. ·Two PoE PSUs installed and operating in redundant mode.

ISC

ISC Slot Status

Green

PVDM4 is present and enabled.

Amber

Initialized with error.

6

LEDs

FAN

STAT

Represents

Fan Status

System Status

Color

Description

Off

Not present.

Green

All fans are operating.

Amber

One fan has stopped working.

Blinking

Two or more fans have stopped working, or the

Amber

fan tray has been removed.

Off

Fans are not being monitored.

Solid

System operating normally.

green Blinking

BIOS/Rommon is booting.

amber Amber

BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software.

Off

System is not out of reset or BIOS image is not loadable.

7

Figure 3 shows the back panel of Cisco ISR4431/K9.

Note:

①

GE management port

⑤

Console port

②

Auxiliary port

⑥

GE Ports

③

USB Type A port

⑦

NIM Slots

④

USB Type B mini port

·The NIMs support 2 single-wide or 1 double-wide. ·The GE Ports include 4 RJ45 ports and 4 SFP ports.

8

The Modules, Cards, Licenses & Accessories Cisco ISR4431/K9 is one of the Cisco 4000 series routers, which support new modules & cards slots, such as NIM, ISC, etc. Besides, Cisco ISR4321/K9 can upgrade by licenses.

Table 3 shows some recommended modules, cards, licenses and several cables.

Items

Models

Descriptions Cisco CAB-SS-449FC RS-449 Cable, DCE Female to

CAB-SS-449FC Smart Serial, 10 Feet Smart Serial Cables Cisco CAB-SS-V35FC V.35 Cable, DCE Female to CAB-SS-V35FC Smart Serial, 10 Feet Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 CAB-AUX-RJ45 and DB25M CAB-ETH-S-RJ45

Cisco Router Cable CAB-ETH-S-RJ45

Console and Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with Auxillary Cables

CAB-CONSOLE-RJ45 RJ45 and DB9F Cisco CAB-CONSOLE-USB Console Cable 6 ft with CAB-CONSOLE-USB USB Type A and mini-B

9

Items

Models

Licenses

L-SL-44-APP-K9=

Descriptions Cisco ISR 4431/4451 AppX license L-SL-44-APPK9= with WAAS/vWAAS 1300/2500 conns RTU Cisco Fourth-Generation Multiflex Trunk Voice and

NIM-1MFT-T1/E1 WAN network interface module Cisco Multiflex Trunk Voice and WAN network NIM-2CE1T1-PRI interface module Analog voice network interface card (ear and NIM-4E/M Network Interface

mouth)

Modules

Cisco Analog voice network interface card NIMNIM-2FXS 2FXS Cisco Analog voice network interface card NIMNIM-2FXS/4FXO 2FXS/4FXO Cisco Fourth-Generation Multiflex Trunk Voice and NIM-8MFT-T1/E1 WAN network interface module

SFPs for On-Board

Cisco GLC-LH-SMD 1000BASE-LX/LH SFP GLC-SX-MMD

GE Ports

transceiver module, MMF/SMF, 1310nm, DOM

10

Items

Models

Descriptions Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver

GLC-LH-SMD module, SMF, 1550nm, DOM Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver GLC-ZX-SMD module, MMF, 850nm, DOM

Compare to Similar Items Models

ISR4451-X/K9 ISR4431/K9

Aggregate

1 Gbps to 2 500 Mbps to 1 200 Mbps to 100 Mbps to 50

Throughput

Gbps

Total onboard 4

ISR4351/K9

ISR4331/K9

ISR4321/K9

Gbps

400 Mbps

300 Mbps

to 100 Mbps

4

3

3

2

4

3

2

2

WAN or LAN 10/100/1000 ports RJ-45-based

4

Mbps

ports

11

Models

ISR4451-X/K9 ISR4431/K9

ISR4351/K9

ISR4331/K9

ISR4321/K9

SFP-based

4

4

3

2

1

2

0

2

1

0

NIM slots

3

3

3

2

2

Onboard

ISC 1

1

1

1

1

1

2

1

1

ports Enhanced servicemodule slots

slot Rack height

2

12

Specification Cisco ISR4431/K9 Specification Aggregate Throughput

500Mbps to 1Gbps

Total onboard WAN or LAN 10/100/1000 ports

4

RJ-45-based ports

4

SFP-based ports

4

Enhanced service-module slots

0

Doublewide service-module slots

0

NIM slots

3

OIR (all I/O modules)

Yes

Onboard ISC slot

1

Default memory double-data-rate 3 (DDR3) error-

NA

correction-code (ECC) DRAM (Combined control/services/data planes) Maximum memory DDR3 ECC DRAM (Combined

NA

control/services/data planes) Default memory DDR3 ECC DRAM (data plane)

2 GB 13

Cisco ISR4431/K9 Specification Maximum memory DDR3 ECC DRAM (data plane)

2 GB

Default memory DDR3 ECC DRAM (control/services plane)

4 GB

Maximum memory DDR3 ECC DRAM (control/services plane)

16 GB

Default flash memory

8 GB

Maximum flash memory

32 GB

External USB 2.0 slots (type A)

2

USB console port -type B mini (up to 115.2 kbps)

1

Serial console port - RJ45 (up to 115.2 kbps)

1

Serial auxiliary port - RJ45 (up to 115.2 kbps)

1

Power-supply options

Internal: AC, DC, and PoE

Redundant power supply

Internal: AC, DC, and PoE

AC input voltage

100 to 240 VAC autoranging

AC input frequency

47 to 63 Hz

AC input current range, AC power supply (maximum)

3 to 1.3A

AC input surge current

60 A peak and less than 5 Arms per half cycle 14

Cisco ISR4431/K9 Specification Typical power (no modules) (watts)

65

Maximum power with AC power supply (watts)

250 (no PoE)

Maximum power with PoE power supply (platform only)

500 with PoE redundant

(watts) Maximum endpoint PoE power available from PoE power supply (watts)

15

250 W with optional redundancy

FAQ Q: What software are the Cisco 4000 Series ISRs capable of running?

A: The 4000 Series ISRs run Cisco IOS XE Software. The initial version will be Cisco IOS XE Software Release 3.9.1. The 4300 and 4431 ISRs were released with Cisco IOS XE Software Release 3.13, and the 4200 Series ISRs were released with Cisco IOS XE Software Release 16.4.1.

Q: Are the Cisco ASR 1000 Series Shared Port Adapter (SPA) cards supported on the 4000 Series ISRs? A: No. SPAs are not compatible with the 4000 Series ISRs.

Q: Can the NIMs or service modules available on the Cisco 4000 Series work on the Cisco ASR 1000 Series?

A: The service modules will work with the Cisco ASR 1000 Series. Select NIMs will also work with the ASR 1000 Series.

Q: Can I use the enhanced high-speed WAN interface cards (EHWICs) available on the Cisco 1900, 2900, and 3900 Series ISRs on the Cisco 4000 Series ISRs?

16

A: EHWIC modules available on the Cisco ISR Generation 2 (ISR G2) routers will not work with the 4000 Series ISRs. The 4000 Series is targeted at new branch-office environments requiring high bandwidth and greater application performance, making most EHWICs unapplicable. Also, the newer NIM architecture allows for faster, more capable modules on a high-end platform.

Q: What memory upgrade options are available on the Cisco 4000 Series?

A: The 4000 Series has separate data and control-plane memory. The control-plane memory comes with 4 GB as the default, and is upgradable up to 16 GB based on various platforms. The data-plane memory comes with 2 GB as the default and is not currently upgradable.

Q: How many dual inline memory modules (DIMMs) does the Cisco ISR4431/K9 have?

A: The Cisco ISR4431/K9 has three DIMM slots.

Q: In the case of control-plane memory, can I put a 4-GB DIMM in one slot and a 2-GB DIMM in the other slot?

A: No. Like the Cisco 3900 Series, the 4000 Series expects both DIMM slots to have the same size of memory; as an example, it must have either 4-GB memory in both slots for a total of 8 GB of control-plane memory, or 2-GB memory in both slots, for a total of 4 GB of control-plane 17

memory. This setup is necessary because these platforms interleave memory devices for faster access.

Q: Do all four ports with both RJ-45 and Small Form-Factor Pluggable (SFP) front panel Gigabit Ethernet (FPGE) connections support failover?

A: Yes. You can configure auto-failover on any of the front-panel ports with both RJ-45 and SFP connections. When auto-failover is configured, if the primary interface type fails, either RJ-45 or SFP, the other media type becomes active and allows traffic to continue over the backup physical connection. In this scenario, the backup connection needs to be connected with the same speed and duplex as the primary connection. Note that the auto-failover feature as described does support one Gigabit Ethernet interface acting as a backup to another. The two physical connections available on a single Gigabit Ethernet interface simply provide failover if a link fails.

Q: Is MDI crossover (MDI-X) supported on the four onboard RJ-45 Ethernet interfaces?

A: Yes.

Q: What power cables work with the Cisco 4000 Series?

18

A: All power-supply options for the 4000 Series use a standard IEC C13 connector. No special IEC C15 cord is necessary for the Power over Ethernet (PoE) power supply because higher-efficiency power supplies (85 percent) are used in the 4000 Series. This cord thus helps lower the maximum current the power supplies can draw.

Source http://www.router-switch.com/cisco-isr4431-k9-p-5751.html

19