



















































For removal and fitting of shock absorbers without damaging the aluminum or cast iron knuckle | Tool adjusts for centered or non-centered slot CM4008
Buy $250 of CTA Get a $25 Gift Card
Oil
Wrench
Remove broken and damaged screws, bolts and other fasteners | Sizes range from 1/8” to 7/8” | Spiral fluting bites in to screw to increase grip | Five hex sizes for use with sockets and wrenches CV44200
25 Piece Multi-Spline Screw Extractor Set $58.00
14 Piece Slide Hammer and Puller Set
The 2 lb. slide hammer and attachments can be used to aid in pulling seals, bearings, and pressed studs | Inside spreads from 3/8” to 1-1/4” and outer spreads up to 3” | Puller depth up to 2-1/2” CV49700
$63.00
52 Piece Master Torx Set Torx Tamper E Torx Torx Plus
Buy $250 of Calvan Get a $25 Gift Card
Hundreds of applications from front to rear on cars and trucks | Includes T6-T70 Torx, T8-T60 Torx Plus, T8-T60 Tamper-Resistant Torx, and E4E24 E-Torx Sockets CV934
$74.00
QC3 Desiccant Dryer Replacement Filter
Used as a Replacement Filter Cartridge in the QC3 Dryer Unit | Removes water, oil and humidity from compressed air | Three-stage filtering with 0. 1 micron rating | High performance filtration with only 2 PSI pressure drop | Easy to maintain DV130524
$67.00
Both Kits feature 2 aluminum cups, air adjusting valve, cleaning kit, and molded case | Ideal for various applications StartingLine Spray Gun Kits
Buy $500 of Devilbiss Get a $25 Gift Card
132 Piece RPT Multi-Bit Set
of
Replaces traditional bits | Bidirectional design loosens & tightens fasteners | R.P.T. Technology prevents fastener rounding | Up to 50% more torque on NEW fasteners | Up to 400% more torque on damaged fasteners
GTMBS132
RPT bits are designed to replace standard drive tools. Provides up to 50% more torque on good fasteners & up to 400% more torque on damaged fasteners | Bidirectional geometry prevents the rounding of fasteners. Set includes: a variety of popular bits and accessories $159.00
81 Piece 3/8” Drive
SAE & Metric Master Socket Set
Made from the highest quality steel | Features the correct balance of strength and durability for high impact jobs | Set contains the most popular sockets and universals with metric sizes up to 22mm & SAE sizes up to 1”, 3” extension, universal joint, and 1/4” hex to 3/8” square adapter GY1281 $463.00
9 Drawer
Features a Dedicated Cordless Tool Charging/Storage
Buy $250 of IRWIN Brands Get a $25 Gift Card
35 Piece Master Screw Extractor Set with Cobalt Bits
The complete set for broken fastener removal | Spiral Screw Extractors (Ex-1-Ex-6) | Multi-Spline Screw Extractors (1/8”-1/2”) | Left Hand Cobalt Drill Bits (5/64”1/2”) | Includes Categorizing Plastic Storage Case HA11135 $188.00
dried grease in joints | Lubricates bearings on farm, lawn & construction equipment
Saver Master Kit Fuse Saver® provides an audible
Clean bushings, ports, tubes, and much more | Each brush has a 1/4” hex driver shank | Brush sizes: 8mm through 19mm Steel, Brass, and Nylon brush types | Includes a driver handle IP8001D
Specially designed to work on 19.5” tires | Powder coated for rust & corrosion protection | Includes (2) Mounting and demounting bars, a bead holder for 19.5” aluminum wheels, a brass bead holder for steel wheels, & a leather aluminum wheel protector pad
Innovative Pusher is ball bearing-driven for near zero turning resistance | Forcing Screw and Pullers have 1-1/8” x 11 threads | Includes two pullers for large and small applications | Use with air impact wrench | Comes in a sturdy, compact, easy-to store case
6-1/2” Heavy Duty Swivel Vise
360° swivel base with double lock-down bolts | Built-in anvils | “V” notched, replaceable/reversible jaws are diamond cut on one side & smooth on the other | Jaw Width 6-1/2”, Opening 9”, Throat depth 3-7/8”, Pipe capacity 1/8”-3-1/2”
SAE and
Taps and Dies that are specifically used for repair of damaged threads | Most popular sizes in taps and dies respectively to 9/16” and 12mm | Master set includes thread files and additional sizes
8 Piece Floating Axle Restorer Set
Flare Nut and Line Socket Sets
Designed to Replace Fuel Line Fittings Without Damage to Fitting, Fuel Rail, and Fuel Line Reducing the Possibility of Fuel Leaks
Aids in the servicing of front and rear floating axle housings on sport utility vehicles, light and medium duty trucks and vans | Sizes include: 1-5/8”-2-1/4”,
10 Piece Left Hand Drill and Extractor Set
Buy $250 of KNKUT Get a $25 Gift Card
29 Piece Drill Buddy Step Point Drill Bit Set
Split point step design starts on contact, self-centers and eliminates the need for a center punch | Reduces heat to increase life of the drill bit | Enlarge existing holes without damaging the drill bit point | Great for steel, brass, sheet metal and acrylics | Sizes: 1/16-1/2 by 64ths
KW29KK10DB
$296.00
cut through tempered steel wire up to 48 HRC | High performance Chrome Vanadium steel blades
KW10KK7-LHSQX
Ideal for removal of broken studs and bolts in tight areas| Featuring a 135° split point and 3 flats on the shanks, these left hand drill bits often remove the bolt or stud without the need for an extractor | Drill Bits: 1/8”3/8” | Square Extractors: SQE1-SQE5 $105.00
Buy $250 of Lang Get a $25 Gift Card
3 Piece Self Locking Angled Pinch Off Pliers
Fast and easy to use for fuel injection, brake, vacuum and cooling systems hoses | Includes one each small, medium and large hose clamping pliers for use on hoses 3/4” to 2.5” LG1500
An affordable option to bulk greasing systems | Fully automatic continuous operation | Variable speed trigger. Accessible check valve assembly | 30” high-pressure hose with coupler, attachment clip, combination filler nipple and bleeder valve LN1162
Buy $250 of Lincoln Mityvac Get a $25 Gift Card
Delivers 7500 PSI | Variable speed trigger with 2-speed transmission | Hose Length (in.): 36 | Ideal choice for filling grease reservoirs | Uses 14-oz. cartridges or bulk fill Includes 3-ft. hose and storage case LNAC2440 120 Volt Power Luber Grease Gun $332.00
7 Piece Emergency Door Unlocking Kit
Get Into Most Vehicles Quickly and Effectively | Includes 54” Two-piece long reach tool, 7” Tip, Button grabber, combo wedge, curved wedge, air wedge, paint protector, case LS84100 $78.00
Buy $250 of Lisle Get a $25 Gift Card
Remove and Install: silent bearings, hydraulic bearings, ball bearings, rubber bearings, shaft seals, bearing brush, etc | Sleeves can be stacked | Diameter Range: 1-3/4” to 3-3/8”
Get Into Most Vehicles Quickly and Effectively | Includes 54” Two-piece glow-in-the-dark tool, 7” Tip, Button grabber, two combo wedges, curved wedge, air wedge, paint protector, case LS84000
8 Piece Master Glow Emergency Door Unlocking Kit $119.00
4 Piece Basic Emergency Door Unlocking Kit
Get Into Most Vehicles Quickly and Effectively | Includes 54” Two-piece long reach tool, Button grabber, combo wedge, paint protector $39.00
The Most Popular Disconnect Tools in One Handy Molded Case | Includes fuel line quick connect and spring lock couplings, air conditioning line couplings, and transmission oil cooler connectors LS39850
Master Disconnect Set $141.00
Impact Pipe Stretchers
A convenient, inexpensive alternative to hydraulic pipe expanders | Stretches many types of pipe including stainless steel | Use with an impact wrench to easily fabricate pipes to widths needed
Fan Clutch Wrench Sets Buy $300 of Mueller Get a $25 Gift Card
Quickly removes and installs fan clutch when repairing the water pump or fan clutch | Faster and easier than conventional fan clutch wrenches | No holding wrench is necessary | Use with an air hammer
Drill out the lug nut/stud threads only in 11 minutes or less without damaging rim | Includes 4 drill guides, 16mm Tungsten steel drill bit, 4 carbide cutters, locking collar clamp | Packaged in a custom blow molded case
Wind Back Tool Kit
Constructed of light weight durable anodized aluminum | Right or left hand wind-back operation. Durable non-impact single piston shaft | Magnetic base to secure adapters | Protective rubber guard to prevent damage to shaft and caliper
slide hammer with | Simply snap the Texas Twister curved air bit into the collet of your hammer with one of the bits attached and reverse the air hammer handle LT855A
Buy $250 of Mayhew Get a $25 Gift Card Buy $250 of LTI Milton Steck Get a $25 Gift Card
5 Piece Dominator Pry Bar Set
Patented two-composite handle for comfortable and secure grip | Shaft goes all the way to the capped end for safety | Includes 8-1/2”, 12”, 17”, 25”, 31” curved tip pry bars
Evap Smoke Machine with Accessory Kit
Diagnose all evap, intake, exhaust, and more | Inject smoke by internal compressor, shop air, or inert gases | Built-in safety pressure relief valve | Pressure regulated at 0.5 PSI $549.00
light. Circuit breaker with reset button. Oil-Resistant cord stays flexible in low temperatures. Grounded plug with 5 ft. lead-in cord.
Set and forget mode switch for high, medium, and low | Body-mounted on/off switch | Anti-roll body design and textured grip | 2 Hour run time on high | 24 Hour run time on low | Fits existing Stinger chargers | Piggyback Kits include 2 batteries
Kit includes everything to perform various automotive diagnostic & mechanical tests, and one-person brake bleeding | Produces vacuum or pressure at the turn of a switch |Durable, accurate pressure/vacuum gauge | Packaged custom molded case
Internal and external jaws provide a variety of combinations to pull bearings, gears and seals.| Two- and three-way cross blocks and cone for multi use| Grip wrench adapter and dent puller attachment for body pulls OT4579 9 Way Slide Hammer Puller Set
Belt tension gauges are used to properly check drive belt tension on drive belts to ensure maximum belt and bearing life. | Scale reads 30 - 180 inch lbs. OT6673 Universal Belt Tension Gauge
duty ball valve on both air inlet and exhaust port | Designed to seat tires on the bead of wheel simply, safe, and fast | Can works on tires up to 24.5”
Professional grade 3/4” Dr. reversible | Measures from 100 to 600 ft...-lbs. in 1 pound increments. | Torque wrench body engraved with ft...-pound and Newton-meters. | Accuracy: 4% +/PMM204
Extremely accurate within 4% of reading from 20% of full scale to full scale | No spring tension on the adjustment knob makes setting torque fast & easy | Storage case, calibration certificate, and instructions included | Range: 200-600 lb. ft. Graduations: 10
Accessories for general use with Power Probe testers | Two self centering piercing probes handle wires from 28-8AWG. | Stackable 1’, 3’ 6’ ft... leads enable you to customize your leads from 1-10ft.
Accurately measures current without removing the fuse | Locates circuits with a parasitic draw | Ability to read Maxi, Mini, & ATC fuses up to 80A | Features Live current display, USB-C rechargeable, Replaceable tips, Screen hold function, Flashlight
broken fuel injector hold-down bolts without removing the cylinder head | Includes fixtures, bushings, drill bits, and tap tools for full bolt extraction and thread restoration
Gift Card
Recovers, recycles, evacuates, leak-tests and recharges R-1234yf with improved 98.5% efficiency | 10” touch LCD display | Automatic internal refrigerant refill, oil drain and refrigerant identification | Wi-Fi or Bluetooth wireless capabilities | Google Cloud printing RAAC1234-9 Connected R-1234YF ACS Machine $6,530.00
deck for added comfort | Easily folds away when not in use | Two casters with brakes to lock in your position | Weight capacity: 400 lbs. | Velcro Pads with Tool Loops for quick access to tools. Expanded Metal Steps for
Produces 1,200 lumens for long-range applications | Independently functioning head & tail switches | High: 1,200 lumens; runs 1.75 hours | Medium: 460 lumens; runs 5.5 hours | Low: 120 lumens; runs 12 hours | Strobe: runs 3.5 hours | “Set and forget it” mode switch $218.00
and outfitted with a tactical pushbutton tail switch | Anodized aluminum, waterproof charge port | 500 lumens
5 Piece LittleEasy Kit
Unlock Cars in Half the Time for Half the Price |Small and compact at 30” | Works on 98% of vehicles | Includes: Non-Marring Wedge, Air Wedge, Paint Protector, Sure-Grip Lock Knob Lifter SM32908-KIT $39.00 Buy $250 of Streamlight Get a $25 Gift Card
Probe 3 Kits Buy $250 of Power Probe Get a $25 Gift
Available in different Colors | Supplies Power or Ground with an indicator tone and bright-white LED head lamps. | Features Digital Voltmeter, Min/Max, Audible Circuit Monitoring, 4mm Standard Banana Jack and Auxiliary Ground for component testing.
Versatile line wrenches designed for convenient, single-handed use | Low-profile design with open-ended head provides maximum access within tight spaces | Push On Pull Off operation | Tightens grip on nut as more pressure is applied. Sizes: 8mm (5/16”)-15mm (19/32”)
Buy $300 of Sunex Get a $25 Gift Card
Slip-resistant adjustable feet | Vinyl padded adjustable backrest | 10-1/2” to 12” adjustable back | 28-1/2” to 33” adjustable height SU8516 Pneumatic Shop Stool
Buy $250 of LTI Milton Steck Get a $25 Gift Card
Holds automotive and light truck disc brake rotors in
Designed to replace brake lines when the OEM
of mobility | Large, reinforced 17” diameter 1” deep tool tray. Low Height (In.) 18 High Height 22” | Seat Width 16” SU8514
Jumbo Wrench Sets
Most common sizes used for automotive repair | Raised panel design | Made of forged high quality carbon steel | Canvas pouch for storage | Chrome Vanadium for 30% more strength & durability | chrome plating to prevent rust, corrosion & deformation
Master Spark Plug Socket Sets
Designed to remove and insert spark plugs with ease using magnetic rings to hold plug in socket while installing or removing it. Set is made up of 12 magnetic sockets with a satin finish, all laid in a black and green EVA foam with labeled sizes. Each socket is conveniently knurled to allow the tech to turn by hand if needed.
Jaws lock in an open position to be able to get over a line and onto a flare nut close automatically | Spring loaded design
Hex and Torx Set T8 - T70 - Standard Torx, E4 - E20 - Torx Sockets | TR10TR55 - Tamper Proof Torx | HEX 1/8” -3/4”
Wrench Sets