NJDCT Catalog by The Nation's Automotive Tool Box

PROMOTIONAL OPPORTUNITIES

1.3” Stinger Keychain Knife

The sharp blade performs tasks from opening letters to self-defense | Features non-slip and durable grip and sheath | Ultralight | Overall length: 2.9”

Small and compact at 30 inches | Use when the BigEasy is just too long | Works on 98% of vehicles | Kit also includes: BigEasy NonMarring Wedge, BigEasy Air Wedge Inflatable Air Shim, Big Easy Paint Protector, Sure-Grip Lock Knob Lifter SM32908-KIT

12 Piece Razor Super-Thin Ratcheting Wrench Set

No-skip 8-19mm 72-tooth wrench set with ratcheting ends up to 40% thinner than similar models | Offset angled open-end heads and slim profile ratcheting ends make for the perfect tight access wrench set AO71012

Designed to GRIP up to 100% rounded fasteners | Able to remove damaged bolts, nuts, broken studs, grease nipples, and much more | Sizes Included - #1-#7 and LEFT HAND

indexing flex head design reversible 72 tooth ratcheting wrenches | Deep design is ideal for recessed and long-threaded fasteners | Spline drive works on 6pt/12pt/ Torx/Torx Plus | Set includes 8-19mm VMDDF100A

6 Piece Metric Deep Spline Flex Head Ratcheting Wrench Set $260.00 Features four

in the Fuse Saver’s fuse box adapter into the blown fuse socket and troubleshoot the short | Access to a wide variety of fuse boxes | Includes 5, 10, 15, 20 and 30 amp breaker handles and the complete Fuse Box Adapter Set

PROMOTIONAL OPPORTUNITIES AND NEW OFFERS

2-Speed design offers users the ability to select between max pressure and max flow rate | On-board LED light | 48” flexible hose | Includes accessories battery, multi-charger and storage

kit includes (2) XC6 batteries and charger | Delivers 50% more power and runs 50% cooler | FREE Tool choices include: Air Pump, 3/8” Compact Impact or 1/2” Impact Wrenches

Batteries run cooler and provides higher run times in all M12 tools | Includes 2 XC5 batteries | Free tool choice of Stick Pump, Grease Gun or 3/8” Ratchet

All the most used bits in one purchase | WEAR GUARD TIP delivers increased resistance | SHOCK ZONE is optimized for each tip type and length of driver bit in the

MWK48-32-4034

CORDLESS TOOLS

CORDLESS CUTTING AND FASTENING TOOLS

M12 Die Grinders

Gauge Shears

CORDLESS TOOLS AND ACCESSORIES

M12 and M18 Batteries and Chargers

Batteries and chargers support all M12 and M18 Brushless tools as well as many legacy non-brushed cordless Milwaukee products. | XC Batteries feature extended high output run times

MWK48-11-2450 M12

MWK48-11-2440

MWK48-11-2460

MWK48-11-1820 M18 2

MWK48-11-1835

MWK48-11-1865

CORDLESS TOOLS AND SEASONAL

tight cutting situations.

Optimized for the longest life and maximum durability.

Super Sawzall Blades

Double relief angle reduces tooth stress for long life. | Matrix II bi-metal teeth for greater durability | 5 Packs

POLISHERS AND SEASONAL EQUIPMENT

3” Cordless Spot Polisher/Sanders

portability for a faster detail | Variable speed dial allows for

speed from 800 to 2200 rpm | Variable speed trigger to precisely control speed | Ergonomically

CORDLESS TOOLS AND ACCESSORIES

Exceptional Cold Weather Performance (0°F) | Immediate Feedback on State of Charge | 90 Min Charge Time | Over 60% More Capacity than smaller amp batteries | Flexvolt features compatibility with 20V

prevent overtightening in

1000°F with speeds similar to corded in key applications. | Reaches operational temperature in less than 6 seconds | 6.35” Most Compact, Stand & Hang features | Bare tool

Temperature | Protects against overheating or damaging wires | 3-Stop Pivoting Head | Kit includes M12 battery and charger

3.5” Woofer and high frequency tweeter for CLEAR SOUND experience | AUDIO LINK allows you to play music through multiple compatible Milwaukee devices |Provides up to 200 feet of range | Up to 10 hours of runtime on an XC4 Battery MWK2955-20 M12 PACKOUT Bluetooth Jobsite Speaker

Charger handles 12/20/60V batteries at the same time | USB kit with C port charger charges 20/60V and personal items on the go

Delivers 75 ft-lbs. of max torque | No-load speed of 0-300 RPM | Quickly swap between 3/8” and 1/2” square drive anvils | Prevents damage from automotive oils and solvents | Integrated LED light and trigger lock DWDCF510B 3/8” & 1/2” Sealed Head Bare

Cordless Heat Guns

SEASONAL/POLISHING/POWER TOOLS

3” Extension Buffer Polisher

Great for detail polishing on wheels | Safety-lock lever; rotational rear exhaust to direct away from operator | Includes 50126 Hook-Face Backup Pad | 3/8”-24 male spindle

3 Piece Brake Caliper Brush Set

Use to remove baked-on brake dust and dirt from brake calipers | Suitable for heavy scrubbing | Stainless steel brush can quickly remove rust, paint, welding slag and scale | Brass bristle brush is for use on softer metals

TN51499

$10.00

Buffing Bonnet Cleaning Tool

Cleans and revitalizes in one operation. Minimizes washing | Bring buffing bonnets back to life | Spur gently removes paster and dust from pad

a .5 hp Right Angle 3500 RPM Rear Exhaust Tool | Allows technicians to remove rust and seam sealers in preparation for repair or replacement of damaged vehicle components | Excellent for removing adhesives, molding tape, decals rust and more

Removes rust and other residues easily and cleanly, right down to the bare metal. | Geared Decal Eraser can strip a 2 foot square decal in less than 2 minutes. | Ideal for removing the adhesive backing on moldings and badges. DNT-700DX Eliminator Pneumatic Grime and Decal Remover $652.00

5 Piece Polisher and Sander Accessory Pack

1/8”

and 2 round pads and a triangular pad

DIAGNOSTIC SCAN TOOLS

$1,332.00

scanners suitable for heavy-duty vehicles that do not support 16-pin connectors. TPHDCKIT

KDGWSMART07

Phoenix Pro Diagnostic Scan Tool

Diagnostic Tool

Bluetooth Connectivity | FREE Software updates | In-depth test, maintenance light reset, and more for complete system diagnostics | Full OBDII testing reads fault codes in ECU via OBDII protocols | Covers 80+ car manufactures KDGWSCAN

Bluetooth Connectivity | OE-Level diagnostics | FREE Software updates | Full bi-directional control, live actuation test | Supports 23 vehicle functions, including throttle matching | Live data mapping and freeze frame capturing | Covers 185+ car manufacturers KDGWSMARTBT Professional Bi-Directional Diagnostic Scan Tool

$149.00

TPTD52110001

Phoenix Elite Diagnostic Scan Tool

Cutting-edge OE-level diagnostic scanner. | Advanced topology features | Perform active tests, online coding, initializations, memory resets, ADAS calibrations, and much more. | 34+ Maintenance Service Functions | Works on 200+ Vehicle Makes $1,590.00

TPTD52110042

Phoenix Smart Diagnostic Scan Tool

TPTD52110062

Phoenix Remote Diagnostic Scan Tool

Extensive coverage of over 200 passenger car & hybrid vehicle models. | FCA Secure Gateway Access | Supports Local & Remote Diagnosis | Cloud-Based Programming & Online Coding | 34+ Maintenance Service Functions | Built-In J2534 for Remote Access Programming $2,569.00

TPTD52110076

Phoenix Lite 2 Diagnostic

Supports

| Performs

TPTD52110105

DIAGNOSTIC TPMS AND KEY PROGRAMING

10.1” Android-based wireless diagnostics and service tablet | Industry-leading coverage of U.S., Asian, and European vehicles, 1996 and newer | Perform Pre- and Post-Scans, all-systems diagnostics, Active Tests and Special Functions | Includes MaxiVCI V200 $1,535.00

MaxiIM Key Programming & IMMO Device

AUIM6081YRUPDATE

AUMS9091YRUPDATE

AUMS9191YRUPDATE

AUMS906MAX1YR

AUMS906BT1YRUPDATE

AUMS906TS1YRUPDATE

AUIMMO1YRUP

AUMS906P1YRUP

AUMS906PT1YRUP

AUMX9001YRUP

Smart Mode for guided and automated key learning | Expert Mode for advanced key learning | Read PIN/ CS (all key lost), key generation, key learning, remote learning | IMMO ECU reset/adaptation, refresh/coding | Backup, Restore, Adaptations/Coding $1,171.00

AUIM508S

MaxiIM Advanced Key Programming Kit

AUIM608PROIIKPA

Wireless Android tablet for Light, Medium and Heavyduty vehicles | Read & erase codes, View Freeze Frame & Live Data | Performs common maintenance & service tasks | Includes Wireless VCI, Deutsch 6 and 9 Pin connectors | Supports AutoScan and Expert Mode $1,105.00

8” Wi-Fi-enabled touchscreen tablet | Perform bi-directional Active Tests and Special Functions | Extensive, 40-plus Service Menu | 7 Hours of continuous battery life | Update firmware and coverage software wirelessly

AUMX900

All Systems Code Reader Service Touch Screen Tablet $530.00

MaxiSYS MS909 Tablet Kit

Guides the technician from code to repair to test with detailed info, illustrations, and Oscilloscope preset guides and tests with waveform library. | Topology Module

Mapping: AUMS909

Distributor For Price

Performs advanced diagnostics on Class 1-Class 9 Heavy duty vehicles | Expert Mode for direct access to OE-specific system components | Extensive service & maintenance functions menu | AutoScan of all available modules AUMS908CVII

Contact Distributor For

MaxiSYS MS919 Scan Tool

Features the MaxiFlash VCMI, a 5-in-1 communication and testing tool providing wireless vehicle communications | Also functions as a 4-channel oscilloscope, waveform generator, Multimeter and CanBUS tester.

AUMS919

The MaxiSYS Ultra is Autel’s most ambitious diagnostics tablet to date, featuring a 12.9-inch touchscreen Android-based tablet powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), substantial 256GB built-in memory and features the MaxiFlash VCMI, a 5-in-1communication and testing tool providing wireless vehicle communications between the vehicle and tablet and supporting the latest DoIP, D-PDU and Mega CAN vehicle communication protocols.

MaxiSYS ULTRA Diagnostic Scan Tool Kit Contact

Phoenix Plus 2 10.1” Pro Scan Tool

a smartphone into a motorcycle scan tool | Provides comprehensive system diagnostics and maintenance functions | Features active test, one-click scanning, wireless connectivity, and an intuitive interface | Experience hassle-free identification with AutoVIN

8” OE-Level Scan Tool that features CAN-FD protocol, online coding, topology mapping functions, FCA Secure Gateway, full-system diagnostics, and 35 maintenance services | Integrates with add-on modules like BT Mobile ProS, Oscilloscope, and more TPPXLITE3

Nano 8” OE-Level

Features a wide array of diagnostic functions | Supports advanced CAN-FD/DoIP protocols and FCA gateway access | Features an online coding function and active tests | 32 essential reset functions and comprehensive all-system diagnostics for automotive maintenance

KEY PROGRAMING DIAGNOSTIC & BATTERY TEST

Send Reports Directly To Your Printer | Read/Clear DTCs, I/M Readiness, HELP Functions | Get technical support through the Feedback

Mastertech II

J2534 VCI

J2534-1 and J2534-2 compliant VCI for OEM reprogramming | It has been fully validated to operate with the top 6 OEM reprogramming applications: GM, Ford, FCA, Nissan/Infinity, Honda/ Acura, and Toyota/Lexus.

BOMTECH2

Super Relay Buddy Testers

Contact Distributor for Price

Applies a 7+ amp load to the relay and looks for excessive voltage drop.| Test results are displayed by the green, red or yellow LED.| The master kit can test up to 10 different relays.

Deluxe Automotive Multimeter Kit

Includes two sets of test leads, RPM pick-up, temperature probe, protective holster and instructions | Analog Bar-graph Display and Large Digits | Measures Volts, Ohms, Amps, RPM, Frequency, Temp., Duty Cycle, Dwell, Continuity & more.

EL585K

$123.00

Unlock a new dimension of

and

Comprehensive Vehicle Database of US, Euro, and Asian brands | Compatible with many ECU, MCU, and EEPROM Manufacturers | Supports a wide array of advanced features | Works on the most common IMMO systems | Compatible with the Phoenix Series of Scanners

BAT 35 Vehicle Computer Memory Saver

Keeps electronics memory based systems alive during battery removal and service | Saves you from tedious and extensive reprogramming

BO3926

Contact Distributor for Price

BAT155 Heavy Duty Battery Tester with Printer

Single load dynamic resistance technology provides fast accurate results | Tests 6/12V batteries from 100-6,000 Cold Cranking Amp and 12/24V charging systems with a diode/ripple test.

BOBAT155

Contact Distributor for Price

120 Battery and Starter/Charger System Tester

Compatible with 6V and 12V automotive batteries. | Tests 12V/24V charging/starting systems gauging alternator health to troubleshoot charging issues | Integrates wireless with the ADS 325/625 diagnostic tools for efficiency BO1699501320

DIAGNOSTIC METERS AND BATTERY

High Accuracy Low Current Amp Clamp

Highly accurate and precise measurements |Superior zeroing circuit, very low drift or bounce | Large clamp size for ground cables | 1 milliamp (0.001A) to 60 A test range | Great for parasitic drains $216.00

EL683

MaxiBAS Battery Tester with Printer

Test 6- and 12-volt Batteries: 100 - 3000 CCA and 12- and 24-volt Cranking/ Charging Systems | Uses Adaptive Conductance Technology to Detect Battery Capacity, Reducing Misdiagnosis

AUBT608

Wireless Battery and Electrical System Analysis

Features VIN scan for Rapid Identification of Vehicle and Battery Specifications | Test 6 and 12-volt Batteries: 100 – 3000 CCA and 12 and 24-volt Cranking/Charging Systems $719.00

AUBTAK Battery Tester Accessory Kit

Digital Multimeter and Current Clamp Kit | Compatible with Autel’s MaxiBAS BT608 and BT609 Battery Analysis Tools | Measures Voltage, Current and Resistance | Includes 400 Amp Clamp, Probes and Leads $242.00

Drain Monitor And Memory Saver

Measures parasitic draw on battery | Back up computer memory when the battery is disconnected | Capable of monitoring parasitic draw for extended periods though blue tooth app

PPDRAWMONITOR

600V Measures AC/DC Voltage, Current, Resistance, Frequency, Duty Cycle, True-RMS, Temperature, Capacitance and more

Accurately measures current without removing the fuse | Locates circuits with a parasitic draw | Ability to read Maxi, Mini, & ATC fuses up to 80A | Features Live current display, USB-C rechargeable, Replaceable tips, Screen hold function, Flashlight $134.00

DIAGNOSTIC METERS AND THERMOMETERS

Automotive digital multimeter

A smart meter that alerts technicians to out-of-spec readings | Measures current across fuses, detecting parasitic draw, and performing cranking voltage and alternator tests | Rated for up to 30 Amps | Rated CATIII/1000V CATIV/600V | Safe for EVs and hybrids $383.00

root mean square measurement, and low impedance input mode

KPKPSTM500 Non-Contact Infrared Thermometer

Offers a range of -20°C to 500°C through non-contact infrared technology | Also measures relative humidity within the range of 10% to 90% | Consistent results across various applications | Displays Max/Min/Avg values

AC/DC Clamp Meters

Displays max/min values and relative measurements | CAT IV 600V safety rating | 4000T Measures DC voltage up to 1000V, AC voltage up to 750V, and AC/DC current up to 1000A

Measures voltage up to 1000V AC/DC and current up to 10A AC/DC | Audible continuity and diode testing capabilities | Includes NCV detection, low impedance measure, and a low pass filter | CATIII 1000V and CAT IV 600V safety ratings

KPKPSDMM9000BT

KPKPSMT470 Automotive Digital Multimeter $35.00

Measures AC/DC voltage up to 600V, DC current up to 10A, and resistance up to 2M Ohm | Low battery alert, data hold function, diode check, continuity buzzer, and polarity correction | CAT III 600V rating

KPKPSMT30

Digital Multimeter $25.00

ELECTRICAL DIAGNOSTIC TESTING

The Power Probe 3 provides simplified testing of Motors, Lights, Relays, Sensors, as well as supplying Power and Ground | The PPECT3000 will help you trace short and open circuits quickly and accurately. | Kit includes the complete lead accessory package PPPPKIT03S

Supplies Power or Ground with an indicator tone and bright-white LED headlamps. | Digital Voltmeter | Also available as a bare tool and in 6 other colors

Probe 4 Basic Diagnostic Kits

Supplies Power and Ground for Functional Component Testing | Digital Volt and Ohmmeter for circuit testing | Large Color LCD Screen with Easy to Navigate User

Supplies Power or Ground with an indicator tone and bright-white LED headlamps. | Intuitively directs users step by step | Digital Voltmeter | Also available as a bare tool and in 6 other colors

The Power Probe 4 Master Combo Kit combines the Power Probe 4, PPECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities.

diagnostic power. | Simplifies the testing of fuse boxes, verifies correct operation of motors, lights, relays, sensors, wires, and communicationcircuits. Use with the PP

App PPPPTM01AS

Intelligent short and open finder that makes locating short and open circuits quicker and more accurate | The ECT3000 receiver is designed to detect the signals emitted from the transmitter

LOADpro Dynamic Testers

Performs a voltage drop test with the push of a button | Works with your existing DMM | Use on 6, 12 and 24 Volt circuits | Test lead length 60”

Digital Multimeter with AC/DC Voltage Detector Measures AC/DC voltage, AC current, and DC current | Noncontact voltage detection and logic level testing | Measures max values and resistance | Low battery alerts | CAT

SPECIALTY TEST AND WIRE TOOLS

Specialty Crimping Pliers

Repetitive, high crimping quality due to precision dies and integral self-releasing lock | Crimping pressure has been set precisely (calibrated) in the factory

Use as jumper leads or to test a automotive electrical circuits. | Kit has 48.5” heavy duty, highly flexible test leads | Stainless steel probes have 8-32 thread to accept most other female threaded test

Heavy Duty and Specialty

areas TA19150 In-Line Wire Stripper

5.5” HD touchscreen display | On-board drawing, audio, text, and video trimming features | Use shop’s Wi-Fi to share findings via email | 5mm camera head | Front and side view cameras with adjustable LED brightness | Highdefinition photo and video with 4X zoom MWK3151-21

M12 Auto Shop Borescope with Wi-Fi File Sharing $1,479.00

Electrical Tab Disconnect Pliers

Easy Access to Hard-to-Reach Connectors using straight or angled heads| Easily removes locking push tab style electrical connectors

Wire Tab Disconnect Tools

SPECIALTY DIAGNOSTIC TOOLS

Use with your scope or DMM for troubleshooting electrical problems | Provides quality and secure test connection, while quickening the test processes |

7 sizes of flat/spade terminals | Tests circuits via fuse panels, distribution box, harness connections & more | Works with Multimeters and digital oscilloscopes | Includes 48” stacking banana plug test leads EL1351

A variety of terminal adapters and back probes enable connection to most vehicle connectors | Includes Interchangeable test leads, probes and clips | Universal to most aftermarket test adapters EL846 70 Piece Diagnostic Test &

92 Piece electrical testing wire kit for cars, trucks, tractors, ATVs, Motorcycles, boats & more. | Effortlessly analyze voltage, continuity, impedance and current | Use with scopes, meters and other testing devices. CM7662

18 Interchangeable probes for a wide range of testing possibilities. | Compatible with most multimeters and scopes with standard 4mm connectors. | Standard 4mm Banana Test Leads allow hands-free testing

BATTERY CHARGERS AND BOOSTERS

(optional) starter battery gives more cranking power than any fast charger | Fully automatic 10 amp charger recharges starter battery or any on-board 12 volt battery | Will accommodate a user supplied group 24 battery

Onboard Battery Chargers

Independently charge and control each battery bank | An integrated thermal sensor detects temperature and alters the charge

Maintainer, trickle charger, and battery desulfator - the perfect all-in-one solution for battery maintenance | Thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging

BATTERY CHARGERS AND BOOSTERS

BATTERY CHARGERS BOOSTERS AND TESTERS

6/12/24 Volt Digital Charger & Tester

Built in fixed 125 A load test, automatically computes CCA rating of the battery | LED readings show all Voltages during and after the test sequence.| Dead Battery Override switch to recover

AS6021AGM

Inflates tires in 6

Air Inflators

(NKAL5) & 1.5 minutes (NKAX65) | Features a pressure sensor and auto shut off | Charge your favorite devices | Shuts off at the set pressure

charge

Heavy Duty UltraSafe Portable Lithium Jump Starter Power Supply

Heavy Duty Battery Chargers

BATTERY CHARGERS AND BOOSTERS

Volt operation with automatic charging mode for easy operation | Power supply mode to support vehicle flashing | Extra long 13’ cables reach all vehicle starting points

Automatic Battery Charger

60/40/10A Charging for 12V Batteries | 20/10A Charging for 24V Batteries | 250A Engine Start Assistance, 12V | Adjustable Stable Power Modes and Zero Volt Charging SIPL3760

Fully automatic operation 40/20/2/230A | 40 Amp 12V fast charge rate | 230 Amp 12V engine starting assistance | Digital display with 7-segment readout | Reverse polarity protection SICI4745

PRO-LOGIX Battery Charger with Engine Start

20/10/2 Amp 6/12V Intelligent Battery Charger / Maintainer Charge virtually any lead acid battery type, Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries | Fully automatic operation | Advanced multiphase charging process $133.00

SIPL2320

Four automatic independent output channels designed to properly charge a flooded or AGM (including Spiral Wound) battery. | Includes 4 sets of clamp outputs.| 4 x 2A output $203.00

SIPL4020 4-Bank Battery Maintenance Station

Specifically designed for the overthe-road transportation industry. | 1400 Cold cranking amps in 12 Volt mode and 800 24 Volt mode. | Ships with AGM batteries

SIHT1224AGM

SIPL3740

BATTERY CHARGERS BOOSTERS AND TESTERS

Power Inverters

Duty Booster Cables

BATTERY CHARGERS BOOSTERS AND TESTERS

Hydraulic oil aids in extreme force crimps| Creates strong crimps for a clean, efficient look for your projects. | High force crimping capacity with multiple crimp settings | Hex crimp for best holding power

Crimps popular 8 - 4/0 AWG copper electrical and battery terminals using stranded wire | Coded, hexagonal rotating dies are always with tool | Long handles for increased leverage | 26” Overall length TA18840

3 Point crimp all at one time and it crimps up to 4awg cables | Use with an impact, can be held with a 3/8” drive extension or ratchet as well as a 19mm or 3/4” inch open end wrench | Crimps cables on the vehicle EZB7946

1.5A Microprocessor controlled to automatically adjust the rate to charge and maintain battery | Features multi-stage charging and auto-voltage detection $39.00

100A Engine Starter - Powerful Enough for Starting Cars, SUV’s and Small Trucks | Microprocessor Controlled automatically adjusts the amperage | Provides Charge Level and helps diagnose electrical problems. $165.00

12V Manual battery charger and engine starter. | Designed for economy-minded do-it-yourselfers, professional mechanics and fleet operations. | Use for both slow and fast charge applications. $221.00 SCSC1308 100 Amp Battery Charger

Generous engine starting power for SUVs, trucks and large engines. | Boost mode for bringing deeply discharged batteries back to life | Charge all battery types

BRAKE LINE REPAIR

Pistol Grip Hydraulic Flaring Tool Kit

Create OE-grade flares in seconds | Includes 4 dies and 10 punches | Create 45 degree single and double flare including DIN | Comes ready to flare tubing sizes 3/16”, 1/4”, 5/16”, 3/8” and 4.75mm

SRRPFT409

Air Brake Repair Kit

$419.00

Another quick and easy way to replace fittings.| Offers the top 25 most popular push-to-connect fittings in one convenient case.| DOT and SAE compliant

SRRAB25

$247.00

Deluxe Fuel Injection Pressure Tester Kit

Accurately diagnose fuel delivery problems including faulty fuel pumps, fuel lines, check valves, and fuel filters. | Adapter kit is universal to most available brands and can be used with cleaning canisters as well

Designed to replace brake lines when the OEM line has failed. | Flexible tubing makes bending and flaring a breeze. | Rated up to 3,000 PSI. DOT approved in many states.

SRRBR-EZ100

SRRBR-EZ100-50

SRRBR-EZ200-100 1/4” x 100’

SRRBR-EZ200-50 1/4” x 50’ $139.00

SRRBR-EZ300 5/16” x 25’ $97.00

SRRBR-EZ400

SRRBR-EZ14

Easy to route and install, bends by hand | Corrosion resistant |Lasts longer than steel and coated products | Includes 16

Makes sharp bends without kinking lines | Wide grip handle helps provide maximum leverage | Specially designed to grip and hold tubing SRRTP14316 3/16” & 1/4” Tubing Pliers $57.00

Self-adjusting brake line cutter automatically adjusts cutting pressure and cuts 3/16” brake line tubing | Minimizes space requirements and can be used in tight spaces directly on the vehicle $40.00

TN85510 Automatic Brake Line Cutter

Nickel Copper Brake Line Coil and Tube Nut Kits

Meets SAE Standard J1047 and ISO 4038 | The strength and structural integrity of steel lines with the added benefit of maneuverability and corrosion resistance | Includes 16 popular tube nut fittings

Straightens both 3/16 and 1/4” tubing | Easily switches between sizes | Use on the car or in a vise | Can be used on aluminum, coppernickel and steel lines

SRRTS224 Handheld Tubing Straightener $56.00

Automatic Ratcheting Tubing Cutter $51.00

Innovative design, great for: Brake Fuel, A/C, Trans & More | Easily cuts 3/16” - 5/8” tubing | Spring-loaded automatic cutter | Ratcheting action handle SRRTC60

SRRCT500 Universal Clamp Making Tool Kit

More durable than standard worm gear clamps | Makes a true 360° seal | Strong, stainless steel wire makes secure, long-lasting clamp connections

$85.00

25”

Copper Line Brake Rebuild Tubing

Max Flex Quick-Fix Brake Line Bundle Kits

HEAT EXTRACTORS AND SHOP TOOLS

ATF OIL AND FLUID REPAIR

MY7201 Fluid Evacuator Plus Pressure and Vacuum Tool 2.3 Gallon

Changes from vacuum to pressure for evacuating or dispensing fluids. | Ideal for draining tanks or reservoirs then pumping the used fluid back out for easy disposal.

line Elite Automotive Repair and Diagnostic Kit

Vacuum & pressure related engine performance diagnostics and tune-ups | Brake bleeding, Fluid transfer, evacuation, and sampling |Kit includes everything for performing automotive diagnostic and mechanical tests

Compressed-air-operated offers professional grade brake and clutch bleeding performance. | Bleeds up to 2 quarts (1.9 liters) per minute | Variable control thumb throttle | 6 and 4’ hoses

GREASE AND SHOP EQUIPMENT

Use with motor oil, transmission fluid, hydraulic oil, and more | Can be mounted on 16-gallon, 55-gallon, & 275-gallon containers | High Flow Rate: 3.9 GPM | Fluid Inlet & Outlet Size: 3/4”

12v DC Fuel Transfer Pump

Diesel and Kerosene applications | Delivers up to 15 gal./min | Weatherproof cast-iron design with high-flow 1¨ inlet and outlet | Three-piece telescoping pick-up tube | Long 13 ft. anti-kink hose with stainless steel outlet adapter

70 Piece Grease Fitting Assortments

Contains 9 popular sizes in straight 45 and 90 degree | 1/4 - 28 , 1/8 - 27, 6mm - 1, 8mm and 10mm | Convenient re-sealable plastic case for easy picking

Small O.D. permits for

Professional Grease Joint Rejuvenators

Grease Joint Rejuvenators open clogged grease joints and fittings effortlessly in less than a minute | Cleans and replenishes old and dirty grease fittings | Loosens dried grease in joints | Lubricates bearings on farm, lawn & construction equipment

LN102891 Wheel Bearing Packer

Bearing packer head for bench mounting or attachment to any air operated grease pump | Services 1 3/4” to 9 1/2” O.D. with minimum I.D of 9/16” | Accepts grease through fitting from high pressure control valve or hand gun.| For bench mount use 1/2” pipe flange.

$380.00

LN102929 Wheel Bearing Packer Assembly $752.00

Flush and pack in one operation eliminating inefficient and messy hand packing | Services bearings from one inch up to 9 1/2 inches. OD with minimum ID of 9/16 In. | Includes adapter to permit servicing smaller bearings of 1 to 1-3/4 In. OD.

Hand Operated Grease Pump $524.00

Unit clamps on any 25-50lb refinery container | Includes flexible follower plate and hose. |Tube size 1-1/4” | Great for field and small shop needs LN1292

Used with air operated pumping systems | Design allows maximum mobility | Usually used on the control handle or at the pump connections

Grease Gun Filling Adapters

FLUID RECOVERY AND LUBE

Loading by cartridge, suction, or bulk | Max pressure: 8,500 PSI | 1/8” NPT outlet | 14-1/2

Resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents | Can be used in any type catch-all funnel to prevent spatter and filter parts

Heavy-duty plastic can be used with most fluid catchers to extend coverage | Flexible and can handle high heat fluid without deforming | Use with splash filter pads for reduced

3 Piece Transmission Oil Filling Funnel Set Universal Transmission Filling Funnel.| Can be used for many domestic and import vehicles | Angle and extensions may work with many other MFG attachments $56.00

Eliminates need to lift heavy vehicles during fluid changes. | Low-profile design that can be easily positioned under highclearance vehicles for capturing used fluids including motor oil, coolant and transmission fluid. | Overall height 7.75” on wheels | Recessed pockets provide storage for drain plugs and filters.

14.5” Pro Grade Funnel with built in screen | Integrated Level Gauge | Simple Air Evacuation | Includes a pressure relief safety valve, 6” fixed wheels and 3” casters, 5’ evacuation hose with J-hook ZLZE21DC

Holds 60 quarts and is equipped with four rollers and a handle for transport and easy positioning under trucks. | Optional 19332 Pump Kit can be added to evacuate fluids at up to 7 gallons per minute.

For draining radiators, crankcases, transmissions, differentials, etc. on cars and trucks. | Designed for easy pouring and disposal. | The apron facilitates washing and sorting parts. Dimensions, 33” x 22” x 8”.

Plastic Funnels

Safe for all petroleum products, complete with handy storage hanging tabs | Capacity indicates what the funnel will hold when

BRAKE BLEEDERS AND REPAIR

DOT4+, & DOT5.1.

Services various EV models, including Tesla Model X, S, 3, and Y. | 3-Liter tank, pressure release valve, 0-70 PSI gauge, and 10-foot hose with quick-disconnect | Adapters boast all-metal construction, a straight & 90° swivel connection CM8854

Caliper Spreader and Press

on twin and quad piston calipers and on single and twin piston floating calipers | Centrally

Pro Series Brake Bleeder Adapters & Tank

Features metal construction adapters for servicing most foreign and domestic | Adapters are equipped with standard European (Nitto) fand National (Melton) fitting adapters for use with other pressurizing components.

18 Piece Brake Caliper Set

MEASURING AND BRAKE TOOLS

Disc Brake & Ball Joint Gage

Checks ball joint wear and disc rotor runout | Checks tire and wheel runout, gear backlash, valve guide wear, etc.| Meets state inspection requirements| Dust, water and oil resistant

FOW72-520-767

Drum & Rotor Measuring Kit with Electronic Caliper

Measures disc brakes and up to 12” on brake drums.| For use with 6” & 8” calipers 0-6” Caliper features:| Resolution: .0005/.01mm. Direct inch/metric conversion. Absolute/incremental measurement

FOW74-101-777

EZ-Drum Electronic Brake Drum Gages

4” to 20”/100 to 500mm Capacity| Inch/ Metric/Fraction Conversion| 4” drum preset | Resolution 0.0005”/0.01mm (fractions in 1/64” increments)

gages reader in metric, and fractions with direct conversions| Water

Standard and Electronic Bore Gages

Bore gauges measure holes, or bores, in a workpiece.They can measure the interior diameter of a hole at any depth | Most kits come with standards and accessories in a case (some spaces left open due to universal case used)

FOW72-646-400

FOW74-646-401

Quick Angle Finding | Easy Digital Navigation | Auto-Rotating LCD Screen | 0 to 90° and 0 to 180° Measurement Ranges | Soft Carrying Case and Two AAA batteries Included | Features Power/Hold Button, Zero/ Range button, & Auto-shutoff feature MWK48-22-5602 Digital Angle Gauge $34.00

Adapter will work on right or left hand rewind calipers | 2 Pin range is from 1/2” (12.7mm) to 1-1/2” (38mm) | 3 Pin range is from 1” (25.4mm) to 1-11/16 (43mm) LS25200

2 and 3 Pin Brake Caliper Adjusting Tool $39.00

Easily Removes and Installs Brake Shoe Anchor Springs on Eaton Air Brakes. | Slotted ends on tool to hold the spring

Remove dust, rust and dirt from the brake caliper bracket | Two adjacent sides for removing chunky rust | Two sides for light removal or detailing finish | OAL: 10.65”. CM9375 Brake Caliper

Easily removes and replaces the S-Cam return spring. | The tip design cradles the return spring to keep it from sliding off LS39770

Truck Brake Spring

ATF BRAKE AND ENGINE AND SHOP TOOLS

(10 qt.)

RADIATOR CLEANING AND LINE TOOLS

Hose Removal/Installers

Set includes one each straight and bent profile (of 4 designs, these were most desired) | Rounded profile reduces gouging / puncturing of hoses and mating connector - especially aluminum or brass | For use on various hoses – radiator, heater, turbo, intake ducting | Can be used in industrial, plumbing, HVAC

2 Piece Radiator Hose Spoon Set

Flat and wide blades reduce the chance of damage when removing. | The long blade is used for pulling the hose off, while the short blade is designed for pushing.

LS82130

Dual Jaw 360° Seal Clamp Pliers

Universal Seal Clamp Pliers with Front and Side Jaws. | Slim head design for crimping in tight spaces. | Works with single or double-ear seal clamps.

Spray Washer And Cooling system Flusher Cleans and washes without damaging the surface with high pressure. | Unique nozzle combines compressed air with water, providing ideal conditions for washing, degreasing at higher pressures. | Complete with interchangeable cooling system nozzles

MYMV7270

$149.00

Fast and easy to use for fuel injection, brake, vacuum and cooling systems hoses.| Angled pliers make it easier to access tight areas where small hoses need to be pinched | Special flat jaws on a pivot make hose closer and stops fluid flow

Features a Mechanism for Clamping without Springs or Any Manual Adjustments. | Clamp down on coolant, fuel and vacuum lines up

Provides coverage for internal and external lines found on vehicles. | Works on type steel brake lines, power steering and transmission cooler lines | Includes clamps and stoppers, caps and pliers

LS67000

Master Line Stopper Set $73.00

Most Commonly Used Heater Hose Fittings | Installations can be done on the car in under 5 minutes. | Easily replace cracked or damaged OE connectors | Can be used for select EVAP repair applications SRRCLC50 Coolant Line Connector Repair Kit $182.00

Offset Locking Hose Clamp Pliers

Special offset angle jaws | 32 x 19mm head with multi-directional slotted pattern for wide application range | Locking mechanism opens up to 65mm | 10-1/2” Extra long reach CM1224

$53.00

Makes accurate, straight cuts with clean edges on rubber or plastic hose, PVC pipe and certain types of wire and wire cable | Replaceable blade #14303 TA14300 Mighty Cutter $28.00

Specialty Hose Pinch-off Pliers

RADIATOR TOOLS

Hose Clamp Pliers

Hose Clamp

For use on the heavy duty clamps used to secure the Turbo/Intercooler hoses, DPF, DOC, and SCR on many Heavy Truck applications | Set includes 8mm, 10mm, 7/16” and 1/2”

an open position for hands-free use.

RADIATOR AND SHOP TOOLS

Hose Clamp Assortments

Top quality clamps packed in an easy pick package | Most popular sizes for engine compartment hoses | 20pc Hose Clamp Assortment

| Set includes:(4) 1”, (2) 1-1/4”, (2) 1-3/4”, (4) 2”, (2) 2-1/2”, (2) 3”, (2) 3-1/2”, (2) 4”

Green 4.5 Gallon

Large Catch Area for Easier Fluid Draining | Smooth pan design is easy to wipe out and clean. 6.25” high to fit tight spaces. 1.125” anti splash outer diameter spout for quick and easy pouring

AL17982

Universal Air Powered Cooling System Pressure Tester

Designed to test and locate cooling system leaks, test caps or speed up the coolant draining process by regulating shop air pressure. | Quick connector works

Vacuum Type Cooling System Refill Kit Refill new coolant by creating a vacuum in the cooling system | Minimizes the risk of engine overheating | Use for passenger and heavy duty vehicles | Venturi Style Vacuum connects with an air compressor to create vacuum | Conical Adapter connects

Econo-Clean Coolant Test Strips

Strips are used to check freeze point and PH of the vehicles coolant | It signals to the tech the need to make adjustments to bring it to the proper manufacturer’s specifications.

Used for measuring the freezing point of either propylene or ethylene glycol based cooling systems. And checking the strength of electrolyte solution batteries | Scale range: 32° F to -60° F RA75240

Multi Fluid Refractometer Battery Coolant/Antifreeze

Test the freezing point of anti-freezes | Measures battery acid gravity to verify life | Automatic temperature compensation | Large, easy to read graphics and high contrast lens | Adjustable viewfinder ML43705

Allows for easy leakage testing of cooling systems | Color coded radiator test caps | Special design of vacuum purge & refill tool connection fits nearly all types of radiators

AO78584 Radiator Pressure Tester & Vacuum Cooling System Kit

Combustion Leak Detector

Pinpoints leaks caused by bad head gaskets, cracked blocks, and cracked or warped head | Fluid changes color when exposed to combustion gases from the radiator | Kit includes gas engine set up

Designed for Slitting the Outer Sheath of Wire Loom Without Damaging Inner Wires | Made of high-quality stainless steel | Double edged blade and comfortable handle allow the tool to cut on the push and pull stroke

Difficult access

RADIATOR AND SHOP TOOLS

1 stroke.

at a rate of 1 gallon per 9 strokes or 1/2 quart per stroke. | Max fluid viscosity of 40 wt., this drum pump is designed to thread onto 2” bung openings of a

and refill for quick change of coolant | Test Range: 0 to 35 psi

RADIATOR AND SHOP TOOLS

Fits 15, 30 & 55 gallon drums with 2” bung opening | Made of polyphenylene sulfide with fluorine rubber and Teflon(R) seals | Use with: thinners, acetone, DEF (Urea), washer fluid, anti-freeze, and other similar type shop fluids

6” opening provides a visual check to see fluid levels when filling tank. | Includes 5”” extension and 45° elbow for hard-to-reach DEF fill ports. | Lid to keep contaminants out as well as storage for parts LS24210

Portable, precision, optical instrument used for measuring the DEF concentration.| Simply place a small liquid DEF sample on the prism, look through the eyepiece, and read the scale OT5025

ENGINE AND BELT REPAIR

Removes and Installs Belts on Serpentine Belt Systems Using the Spring Loaded Idler Pulley. | Comes with extension for hardto-reach idler pulleys. | This tool will work where conventional ratchets or breaker bars won’t fit due to limited access.

Locking Flex Wrench Serpentine Belt Tool Kit

Belt tension gauges are used to properly check drive belt tension on drive belts to ensure maximum belt and bearing life. | Scale reads 30 - 180 inch lbs. OT6673

Compresses the belt tensioner spring during engine drive replacement and starter generator servicing. | Applications 2.4L GM eAssist engines in: 2012 - 2016 Buick LaCrosse, 2012 - 2017 Buick Regal, 2011 - 2014 Chevrolet Malibu OT6725

25” Three-pin design to accommodate serpentine V-belts and timing belts | Provides extra control for push/pull applications | Ergonomic handle gives technician twisting control to install belts in confined hard to reach areas

Locking Flex-Head Ratcheting Wrench for better access | Get around obstructions - lines, motor mounts, pulleys | 5 locking positions straight, +2 positions -2 positions. Each position 17° $104.00

KD89000

Serpentine GearWrench Repair Kit

Makes changing serpentine accessory belts easy even in tight spaces. | Nearly 100% coverage of all vehicles including the 3/4” Volvo | Both crows foot and sockets included for increased versatility $74.00

KD3680

BMW/MINI Alternator Belt Tensioner Release Tool

Removes and installs the serpentine belt on B36, B38, B46 & B48 engines | Services 2014+ B36/B38 (3cyl) & B46/B48 (4cyl) | Compare to BMW Factory Tool 2365291

CM3884

Mini Cooper Serpentine Belt Tool Set

22” (55cm) long, special angled wrenches service serpentine belts on Mini’s with N12, N14, N16 & N18 engines. | Each wrench features different 12-point size, black finish and vinyl grip.

Fan Clutch Pneumatic Wrench Sets

STEERING AND ENGINE REPAIR

Everything needed to remove and install power steering pump pulleys in Chrysler, Ford, and GM vehicles with Saginaw, Thompson, and Ford C111 and C2 power steering pumps. | Fits 1-1/8”, 1-1/4”, 1-5/16” and 1-3/8” pulley hub diameters

Remove and install power steering pump pulleys of most domestic vehicles. | Fits pulley hubs with diameters of 1- 1/8”, 1-1/4”, 1- 5/16” and 1-3/8” for servicing: GM 3.1 L, 3100, 3400, and 3800 V6 engines, GM 2.3L Quad 4 four-cylinder and Ford 4.6L, 5.4L, and 5.8L modular V8

$81.00

$68.00 OT4530

Designed for use on power steering pump pulley to prevent damage during pump and pulley removal. | Also used to remove alternator pulley on Chrysler vehicles.

V-Belt Pulley Puller

A complete steering wheel service set | Includes a forged puller flange with 5 sets of hardened hex head bolts for 2 or 3 way pulling configurations, a set of steering wheel puller legs for steering wheels without tapped holes and a steering wheel pivot pin remove. | Covers all lock plates and steering columns.

$259.00

Inside of the tool is designed to fit securely on the front side of pulley. | Works on 2011 and newer Ford 3.5L EcoBoost and 3.7L engines, as well as 2019 and newer GM 5.3L and 6.2L engines.

LS59350

Stretch Belt Stretch Belt Installer - Double Pulleys $31.00

No Slip Pulley Puller Installer

Removes and Installs Pressed on Power Steering, Alternator and Air Pump Pulleys. | Makes removing pressed on pulleys an easy job. | Fits most domestic models including GM 3.1 and Quad 4 engines. | Works on traditional V shaped pulleys and serpentine belt system pulleys LS39000

$76.00

Steering Wheel Puller Universal Puller for Most Makes and Models. | Screw pad protects end of steering shaft. | Heavy duty for long use LS45000

$28.00

Safely remove stubborn pulleys without causing damage | Compatible with both pullers and pushpullers | Maximum spread of 5-7/8” | Minimum spread of 1-3/4” | Threaded hole size of 5/8-18 $96.00

CM8165

30 Piece Master Harmonic Damper Pulley Puller Set

Works on many domestic & import vehicles | Includes extra set of Spring washers and clevis pin | Compact design has everything needed in a master set SL18000

| This kit contains specialty tools for servicing the front and rear crankshaft seals on 2001-2016 6.6L Duramax diesel engines. | Includes: 3878 Rear Crankshaft Seal Installer to press fit the rear seal, 3879 Front Crankshaft Seal Installer to press fit the front seal, 4042 Front Crankshaft Seal/Wear Sleeve Remover to pull the front seal without damage, and 4043 Rear Crankshaft Seal Remover with jaws to grab and remove the rear seal safely.

CM4044

$731.00

Universal Steering Wheel Puller

POWER STEERING AND ENGINE TOOLS

Allows you to create high and low pressure lines for hundreds of different line Types | Use for power steering lines, clutch, industrial and heavy duty applications | Model # 2000 kit includes 37 pieces to construct most sizes of steering lines

SRRPS1000 3/8” & 5/16” Kit

4 Piece Injection Line Wrench Set

12-point “Bi-hex” for Rail Injection, Power steering lines, Expansion valves,. | Perfect for Benz Sprinter Diesel Common Rail Injection & ISX Cummins | Kit includes the following sizes: 14mm, 17mm, 19mm & 22mm. 1/2” Dr. CM7468

Steering Tester

Test for defects in pumps, gears and lines. | Reads from 0-2,000 PSI and 0-140 BAR and 0-2,000 PSI and 0-140 BAR. | Use to rule out steering problems before expensive suspension or steering linkage problem is attacked. TA34650

Steering Wheel Holder and Pedal Depressor

Holds the steering wheel, brake pedal, accelerator or clutch pedal in a desired position | Easy to assemble and install

40” Throttle Adjuster

Holds Throttle at a Constant RPM. | Engage the nylon hook under the steering wheel. | Then extend the depressor rod to the accelerator pedal. | Use the adjustment screw to fine-tune the RPM level $32.00

Truck Pedal Depressor

Tool extends from 18 1/2” to 34 1/2” | Depresses and Holds Clutch Pedals and Brake Pedals. The two-piece, telescoping tool extends to the pedal and locks in position

Measures 1 to 10 gallons oil flow and up to 3,000 psi of pressure. | Will isolate the failed components in just minutes.| Complete with hoses, 9/16”-18 standard fittings, and couplers for Eaton/Vickers, TRW, Ross, and Shepard OT5079

Steering Adapters Adapters are used with vacuum pumps or other test devices to aid in line bleeding | Can

Tools used to separate connectors on the P/S system and EGR coolers without damage. | Also works on connectors on other liquid and air lines. | Similar to J-45666 & J-42971. | Applications: 2003-later Medium Duty trucks. OT5089

Removes the Driver Side Airbag with Wire Spring Clips, Used on Many Chrysler, Dodge and Jeep Vehicles | Used on Jeep Liberty (KK), Chrysler/Dodge mini van (RT/ RM), Dodge Nitro (KA), Dodge Ram truck (DS), Chrysler PT Cruiser (PT) and Jeep Wrangler (JK). LS56200

Power Steering Evacuation Cap

Allows for removal of air from the power steering system when used with a vacuum pump. | Air in the system can cause noise and premature pump failure. | Fits various power steering pump reservoirs. | Similar to 211-265.

LS48700

ENGINE AND BRAKE MEASURING

Cylinder Bore Setting Master

Easily set any bore gage up to 6. | Includes 36 pc gage block set. | Accuracy of .0001 for superior measuring accuracy. | Fast adjustment with quick release holder. | N.I.S.T traceable certificate of calibration.

CE3D501

6” Digital Electronic Calipers

Suitable for general measuring where precision is needed | Range: 0-6”/150mm | Large easy-to-read display. | Absolute/incremental measurement. | Direct inch/metric conversions

Telescoping Gage Set up to 6”

Rotor Run-Out Set

1 Indicator range with revolution counter | Special locking pliers for multiple mounting capabilities | Flexible arm for superior reach | Perfect for checking rotor runout and ball joint movement

CE3D103

Wheels on Drum Gage for Brakes

Double action rigid handle with self centering feature | Constant spring tension for uniform feel. | Covers a measuring range of 5/16” to 6” with measurable depths of 4” to 5”.

FOW72-470-006

Digital Micrometer

$164.00

Large LCD display with resolution .00005”/.001mm, range 0-1”/0-25mm | Direct RS 232 output includes ball attachment | Carbide measuring faces. | Absolute and incremental modes. | Ratchet thimble.

FOW74-870-001

Brake Reset Gauge

$163.00

Used to set the proper clearance between brake lining and drum prior to assembly. | Knurled know locks tool at measurement. | Working drum diameter range: 6-1/2” to 14-1/4”. Calibrated in 1/32” (1mm) increments

KD3377

$68.00

CE3B631

8” - 24” Truck Digital Drum Gage

Extended range to satisfies most state DOT specs | HD requirement of 24” | Pointed anvils to measure into grooves | Easy to read digital display | Depth stops to improve accuracy $292.00

Measure truck trailer drums without removing wheels. | Unique shape to go around air cans. | Electronic Brake Drum Gage | 4”-20”/100-500mm capacity | 4” drum preset CE3B532

Drum And Rotor Measuring Kit

Attaches to any caliper onto the lower jaws | Outward facing anvils for drum measurement | Inward facing anvils for rotor measurement | Flat and pointed contacts can be used as necessary | 8” -13” plus oversize for drums Includes 3C301 caliper

CE3K301

Outside Micrometer Set 0-4”

$108.00

FOW72-229-214

$476.00

SPECIALTY ENGINE/GENERAL TOOLS

12” Digi Pro Electronic Protractor

Embedded magnets for unique measurement areas. | On/Off, Zero, Hold and Reverse feature to invert the display for easier reading in certain situations. | Full, 360° measuring range

FOW74-440-775

$186.00

Articulating Mag Base and Indicator Combo Set

Fine adjust, 85 lb. pull, Articulating Mag Base| V-slot on base for mounting on rounded surfaces. | Can be set up in almost unlimited positions | 1” travel. | Continuous reading: 0-100. AGD group 2, 2-1/4” dial diameter.

FOW72-585-150

$259.00

X-Proof Water Resistant Indicator Set

FOW72-585-155

$155.00

LCD Digital Depth Gage

Carbide anvils range: 35 to 160mm, Graduation: 0.01mm| Easily adjustable, Self-centering, Insulated grip| Chrome plated handle, Includes extension holder and fitted case. $136.00

FOW74-225-555

Digi Level PLUS

Features include Super large 18mm backlit display, includes a 6” straight edge with beveled edge and 1/64th graduations | IP65 protection, Rechargeable battery, USB charging cable, Auto inverting display.

FOW74-422-550-0

Measures 0-6”/150mm| Robust housing| Large LCD display | Reading: .01”/.1mm/1/64ths| Accuracy: .01”/.1mm/1/64ths

Offset 5/16” ratcheting wrench used to make corrections to the automatic slack adjuster | Set includes double square reversible ratchet wrench and tensioner button release tool

SPECIALTY ENGINE/GENERAL TOOLS

3.0L & 3.6L Porsche Macan Timing Tool Kit

Use for locking the cams and crankshaft when replacing the timing chain and cylinder head gasket on second gen V6 twin turbo engines. | 2014-2016 Porsche Macan 3.0DS (MCT.B), 3.0S (MCT.M) & 3.6TTV6 (MCT.L).

$118.00

Includes: 3762 - Porsche Cam Turning Wrench for countering camshaft while simultaneously releasing opposed components. | 3764Porsche Camshaft Nut Wrench for loosening and tightening camshaft nut.

by 12-point flare nut and deep crowfoot socket removes injectors without damage to nut, lines or electrical connections. | Flare Nut length: 2.0”, Deep Crowfoot length: 3.5”.

CM1468

Ford V8-6.7L Power Stroke

Designed to pull the injector straight out without rocking the part | Reduces damage to fuel injector or cylinder head | Fits 2011 to current model 6.7L Power Stroke

Cummins Engine Barring Tool

Allows the Engine Crank to be Manually Adjusted. | Works on Cummins 3.9L, 8.3L, B & C series 5.9L and 6.7L diesel engines. | Can be used to make sure the engine rotates freely while troubleshooting other issues or to access torque converter bolts

$38.00

Diesel Injector Puller Kit

Two-jaw design firmly grips the injector while it is being removed by the slide hammer. |Applications: Duramax 2001- 2010, LB7, LLY, LBS. and LMM. 2011 and newer LML engines. | Cummins 2003 to 2018 5.9L and 6.7L.

Fuel System Primping Pump

High quality stainless steel tank eliminates corrosion and holds up to 3 gallons.| Applications include Detroit Diesel S60, MBE900, and MBE4000.

Use for easily removing stuck injectors. | Perfectly weighted slide hammer for injector extraction. | Services: Ford EcoBoost GDI engines (1.0L, 2.0L & 3.5L). CM7798 Ford Fuel Injector Puller Remover Tool

Used for the installation and removal of injector lines & exhaust gas temperature sensors without damage | Includes both offset and straight options for clearance issues | Open hex body for clearance CM8857

Cylinder Liner Puller

The spring loaded puller arms automatically adjust to fit the liner for a fast set-up time | Works on select Mack, Volvo, Detroit Diesel, International, Cummins, Navistar and other Caterpillar engines.

Works on ABS, master cylinder, coolant, steering components and hydraulic lines | Set includes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16” and 3/4”.

DISCONNECTS AND GAS TANK TOOLS

ENGINE REPAIR AND INJECTOR TOOLS

Automatic Transmission and Oil Test Kit

Tests to problem solve quickly | Adapters cover most Vehicles. | Includes 2 gauges, 6’ of hose and 10 assorted fittings. | 0-600 PSI, 0-4000 kPa and 0-40 BAR.

Transmission and Engine Oil Test Kit

Includes high and low pressure gauges for both transmission and engine work. | Designed to be used for both static and on road testing. Kit includes 13 adapters

Kit is designed to repair glow plug threads for a wide range of diesel engines | Sizes: M8 x 1.00 (short & long), M9 x 1.00, M10 x 1.00 & M10 x 1.25 | Tip Puller removes broken glow plug tips stuck in the cylinder head

Cylinder Leak Down Tester

Safely and effectively removes broken glow plugs in 5 easy steps using a proven process | Sets available in two popular sizes

6 Piece Spark Plug & Glow Plug Socket Set

Vacuum Pressure Gage Kit

Quickly diagnose internal engine problems such as bad rings, valves and leaking head gaskets. | Kit comes complete with adapter for most applications.| Dual purpose gauge reads vacuum and pressure.

Quickly diagnose internal engine problem | Dual 2-1/2” gauges read 0-100 psi and 0-700 kPa. | Pressure regulated manifold includes quick couplers. $153.00 OT5613

Measures

Cylinder Leak Testers

| Pinpoints

For removal and installation of Spark Plugs, Glow Plugs & Pressure Sensor Glow (PSG) Plugs. | Included sizes: 8mm x 6-point, 9mm x 6-point, 10mm x 6-point, 12mm x 6-point, 14mm x 12-point & 16mm x 6-point. CM7392

$113.00

Injector Seal Extraction Kit $233.00

Removes clogged or stuck diesel injector seals | Slide hammer designed with integrated hexagonal socket to screw extractor into the seal | Services both passenger and light-duty utility vans & trucks CM7806

Injector Puller Kit $319.00

Removes frozen or caked injectors without removing the electrical part. | Remove the injector by either rotating with the handle or rotating with axial extraction. CM7808

INKZALL Fine Point Marker (2Pk.)

Glow Plug Thread Repair

Glow Plug Removal Kits

ENGINE REPAIR

SPECIALTY ENGINE TOOLS AND KITS

Tools for camshaft alignment on M176, M177, and M178 engines | Ensures factory-level accuracy for AMG engine timing | Compatible with Mercedes-Benz AMG C63, C63S, and G63 models

Aligns and holds camshafts in TDC on Mercedes-Benz M256 engines | Ensures precise camshaft positioning for accurate timing | Ideal for mechanics handling M256 engine maintenance

Ensures precise camshaft positioning on Mercedes-Benz M139 engines | Holds camshafts at TDC for accurate timing adjustments | Essential for servicing AMG A45, CLA45, and GLA45 models

Allows bushing replacement without removing the entire differential | Compatible with F01, F02, F04, F06, F07, F10-F13, and F18 models

Benz OM651 Diesel Timing Tool Kit

Sets and locks camshafts in place on Mercedes-Benz OM651 engines | Aids in crankshaft pulley installation and removal for precise timing | Compatible with 2017+ GLE250D models $182.00

Services most Ford, Lincoln, & Mercury vehicles | Safely apply torque on the pinion nut | Universal design to fit the flange bolt centerlines up to 2-5/8Ó | Compare to Ford Factory Tool #303-126

Installs crankshaft radial seals on Mini Cooper N13/N14 engines |

M139 Bearing Tool Set

Removes and installs bearings and timing chain components on M139 engines | Ensures proper alignment and precision during maintenance | Designed for professional mechanics servicing AMG models CM9709

Intended for difficult to remove, seized, rusted and/or corroded bolt-in Subaru ball joints | The unique sliding pin non-rotating design removes ball joints in a single pulling motion without spinning the ball joint stud

Replaces Teflon fuel injector seals on Hitachi, Bosch, Continental, and Delphi injectors | Includes cones, pushers, and resizers for proper seal fit | Ford EcoBoost, GM 2010+ models, and Subaru turbo CM8481

Mini Cooper Crank Seal Tools

TIMING/ENGINE REPAIR

PARTS KITS/REPAIR SOLUTIONS

SPECIALTY ENGINE REPAIR

For long reach applications, especially diesel. 12 blades .0015., to 040 | Metric markings included. | Blades are removable.

GM Duramax Diesel Engines. | Applications: LB7 (2001 – 2004); LLY (2004 -2005); Lbs. (2006 – 2007); LMM (2007- 2011); LGH (2010 – 2017); LML (2011 – 2016)

L5P (2017 – 2023)

CRANKSHAFT AND ENGINE TOOLS

VAG Camshaft Counter hold Tool Kit $259.00

Designed for counter holding the oil pump and camshaft chain sprocket during maintenance tasks on VW 2.0T engines | VW applications include: Golf (GTI), Jetta (GLI), Passat (B6), EOS, Tiguan, CC, Beetle and more CM8859

BMW AWD Transfer Case Bushing Tool

R&R installation of transfer case mount bushings on BMW AWD models 1, 3, 5, 6, 7 Series, X1, X3, X5, and X6 from 2003-2015. | Allows for easy bushing service with the transfer case still mounted CM8814

$310.00

Benz Timing Tool Kit

Properly time M133, M260, M264, M270 and M274 | Positions the camshafts in the TDC position which slackens and tightens the bolts attached to the camshaft gears | Works on most MB and Infiniti models from 2012 and newer CM6100

$584.00

BMW Mini Timing Tool Kit

For precise timing services on BMW, MINI, and Toyota (Supra) vehicles. | This kit covers a variety of gasoline engines (1.2L, 1.5L, 1.6L, 2.0L, and 3.0L) across 3, 4, and 6 cylinders | B38/B48/B58 CM3034

$643.00

CM8855 Jag/Landrover 2.0L Timing Tool Kit

Used for timing chain replacement for Jaguar and Land Rover 2.0L Turbo (EcoBoost) engines | Use on 2013-2015 Jaguar XF RWD and 2013-2017 Land Rover Evoque models | Compare to Factory Tools 303-1594, 303-1595, 303-1600, 303-1521, and 303-748

CRANKSHAFT TIMING AND ENGINE REPAIR

ENGINE AND FUEL LINE REPAIR

Spark Checkers and Kits

Use to test spark plug circuits, electronic fuel injection signals and idle air control circuits.| Noid Lights used to quickly diagnose “no start” and engine misses conditions

LOCK OUT AND SPECIALTY REMOVAL TOOLS

Use for all five-six-eight lug applications | Stronger mounting holes | 3/4”’ heavy duty steelback plate | 1/4” square tubing, ¼” striking plate | Flanged nuts for improved safety and performance

Rethreading Kit

Rethread damaged male and female brake fittings | Compact dual design male/female combo sockets | Rethread damaged brake fittings on vehicle | Most common sizes - SAE and Metric

19 pieces and is the ultimate product available today to handle emergency lockouts. | Includes a fully illustrated instruction manual to unlock most

Apply air hammer vibration and torque to any LTI Crowsfoot or Kentucky Kicker Sets | Uses repetitive hammering punches (Kit1910PK) with the accessory to jar free fasteners using hypersonic vibration

Air hammer powered removes frozen and obstructed 02 Sensors on Kenworth, Cummins, International, Detroit & Volvo diesel truck engines. | Includes low profile design for Ford, Toyota, and Lexus applications. LT994

Convert your air hammer into a pneumatic slide hammer with | Simply snap the Texas Twister curved air bit into the collet of your hammer with one of the bits attached and reverse the air hammer handle LT855A

Large Creepers feature 4” pop-in wheels for smoother rides on cracked or uneven surfaces | Standard size fits the needs of most shops and are lower for more clearance

SHOP AND ENGINE TOOLS

Safely hang on the tool box where the standard handle mount would be | Hooks mount on the 24” wide rail | Two 5” slots line up with toolbox or cart handle mounting holes

Great protection when venturing on off road situations and under a vehicle where no jacks or lifts are used.| Folds up for convenient storage.

CREEPERS AND COMFORT SEATING

MeshFlex Creeper Low profile design for additional working room while underneath a vehicle | Wide Mesh Deck adds extra comfort, airflow and stability when in-use | Huge hard plastic 5” Casters

TIRE SERVICE AND MEASURING

Pro Analog Pistol Grip Inflator Gauges

TIRE SERVICE AND REPAIR

Repair most inflatable tires on and off the road | Kits include all the things needed for on the car injury repairs | Steel insertion tools and reamers are HD and have replaceable stems

TIRE SERVICE AND REPAIR

Software license code updates that can easily be transferred from your dealer without hassle | Activation allows user to get the most up to date information including new sensor OE and aftermarket information

Pc Spare Tire Tool Kit

CREEPERS AND SHOP SEATS

Features sewn in magnets which stay on any metal surface easily | Helps keep vehicle finish free of grease and scratches | Thick slip resistant vinyl cleans up easily | 34. 25” length x 15. 275” width x 0. 122” thickness

Professional Shop Seats and Rests

Upholstery resists most shop chemicals and cleans easily | Powder coat finish protects frame | Polyurethane rollers provide effortless mobility across shop floors

24” Kneeling Pad with Magnetic Pocket

Good balance between usefulness and comfort | 16” by 24” solvent resistant 1” 1/8” thick three layer base | Magnetized compartment to hold parts with separate compartments

Race Day Expandable Stool $37.00

Expandable Seat Great for shops, races, hiking, fishing, hunting, concerts, etc. | 12 Adjustable heights, expands up to 17.9” | Comes with carrying strap | Holds up to 250 Lbs. VMRDS1G

Low profile design fits under a car.| Features 2 large recessed and 2 small magnetic recessed compartments.| Center metal plate to attach any magnetic tray or light with magnetic base.| 2’’ caster wheels. VMRTT20 20’’ Rolling Tool Tray

$57.00

40” 6 Wheel Creeper With Shoulder Drops

Longer and wider for additional working comfort| Drop frame at shoulder for ease of movement| Full length, padded, oil-resistant vinyl center panel | Six heavy duty, dual-post casters| 42” L x 21” W x 3-1/2” H IN3908A

$109.00

Shop Stool

Durable chrome tube construction| Ideal height for counter or shop floor| High density 3.5” thick foam for maximum comfort | Cleans easily and resists most chemicals | 300 LB weight capacity IN3913

$105.00

Swivel Pneumatic Tractor Seat with Adjustable Height

Air cylinder for easy height adjustment | Five 3-1/2” heavy duty, chrome finished casters with rubber tread for ease of mobility | Large, reinforced 17” diameter 1” deep tool tray | Low Height (In.) 18 High Height 22” | Seat Width 16” SU8514

$187.00

Rolling Storage Garage

HD TIRE REPAIR/ GLOVES AND SHOES

the

Truck Lug Nut Sockets

Golden Buddy Wheel Mount

TIRE REPAIR AND GLOVES

Latex and Nitrile Gloves

$46.00

Sold by the case for best price | Durable with exceptional gripping and protective thicknesses for extended use

Easily remove standard, or damaged capped/clad lug nuts | Thin walled, high tensile strength | Easily slides on to remove capped/clad lug nuts | Delivers snug hold on fasteners |1/2” drive set includes sizes 17-27.5mm LT1237

7 Piece Flip Socket Set $101.00

| Dual-layer internal fingertip reinforcement

MXMF300X-10 Diamond Grip Latex with textured hand area for maximum grip. Sizes: S,M,L,XL

MXMK296X-10 MidKnight Black Nitrile with a distinct color that resists stains. Sizes: S,M,L,XL, XXL

MXSG375X-10 Safe Grip Blue Beaded cuff for greater protection over the wrist and arm | 25 Pairs per box. Sizes: S,M,L,XL, XL

MX92-134X Light Blue Nitrile (Latex Free) Textured on the fingertips | Beaded Cuff Sizes: S,M,L,XL, XXL

MX93-256X-10 MEGA Texture Orange Nitrile with short cuff and extra thick finger thickness. Sizes: S,M,L,XL

Sold Individually or by the case for best price | Durable with exceptional gripping & protective thicknesses for extended use Item # Fitments

SS660X Thickster

Great for impact protection and heavy duty use | Made for long lasting durability Item # Description

RGR161-XX Yellow Super Hero | Impact protection | Adjustable cuff | Sizes S,M,L,XL,XXL

RG163-XX Black Super Hero | Impact protection | Adjustable cuff | Sizes S,M,L,XL,XXL

General Use Work Gloves

RG113T-XX Black Turbo | Adjustable cuff | Leather & mesh fabric | S,M,L,XL, XXL

RG116T-XX Orange Turbo | Adjustable cuff | Leather & mesh fabric | S,M,L,XL, XXL

RG133T-XX Black Turbo | Elastic cuff | Leather and mesh fabric | S,M,L,XL, XXL

RG136-XX Orange Turbo | Elastic cuff | Leather and mesh fabric | S,M,L,XL, XXL

Includes the 5 piece Lug Nut Remover Set and 6 Piece Emergency “Twist” Flip Socket Set. | Impact grade sockets and extension provide maximum grip and torque CM5710 11 Piece Emergency Lug Removal Socket Master Kit $162.00

TIRE AND SPECIALTY WHEEL REPAIR

Removes most factory wheel lugnut locks | Identical to factory tools or the OEM set provided with the vehicle | Each part is labeled with the identical OEM number that can be found in reference manuals to make selection that much more easier | Hand use only

Perfect for damaged, swollen, and stuck nuts. | Includes 17.5mm, 19.5mm, 21.5mm, and 22.5mm | Sockets squeeze in to tight lug areas with thin wall construction

Double-Ended Flip Sockets Offer 2 Hex Sizes in Each Socket | Made from chrome moly steel with a black oxide finish. | 4 Piece Set includes a punch, 18.5mm X 19.5mm, 21mm X 21.5mm, 22mm X 22.5mm. LS13050 Flip Socket Set

Use on alloy wheels with decorative lug nuts. | Sizes 3/4’’, 13/16”, 7/8”, 15/16”, 1”, 1-1/16’’ and 17mm, 19mm, 21-23mm. | Plastic sleeves and internal inserts prevents damage GY1511TP

Emergency lug nut removal sockets ensure you always have the right size | Fits 17, 18.5,

Can be used with both 13/16” and 7/8” wrenches | Thin walls and

Patented reverse tapered threads effectively remove stripped lug nuts or lug nuts with missing keys | Compatible with 1/2” drive impact wrenches | Set includes six sizes: 3/4”, 13/16”, 15/16” , 1”, 1-1/8”, 17mm $64.00

1/2” Drive Lug Nut Drum Sockets

use on lug nuts or stubborn applications like crank bolts | Hollow drum design multiplies torque

gun compatible | Ideal for removing stripped, rusted, broken or smooth studs | Hex drive can be a driver with a wrench, ratchet, or impact tool | Fits 1/4” to 1/2” studs

Thin Wall Wheel Nut Protector Set

SPECIALTY AND HEAVY DUTY TIRE REPAIR

32” Bead Breaking Wedge with Polymer Handle

Hump Design prevents tool from wedging between rim and bead. | Breaks the bead with little or no prying | Full length fiberglass core for greater strength. | Coating on handle provides durability. $168.00

Mount and Demount Tire Irons

Mount and demount tires without changing the way the tool is used. | Different ends make for multiple uses | Tools feature pry stops for increases leverage

The Complete Set Contains all the tools you need for changing most 22.5” & 24.5” tubeless truck tires | Quickly tackle demounting the top and bottom beads of tires in mere seconds by applying leverage to where it is needed most and reduces user fatigue dramatically.

5000 lbs. of static pressing force! | Works on 15” to 24.5” dual and single wheels and tires on trucks & trailers | 3 foot inflation hose makes access easy and safe KN34555 Shark Fin Dual Wheel Separation Bag

Slide Style Impact Bead Breaker $277.00

Bead breaker loosens beads with bead-breaking foot and ram bar, but never cuts the bead of the tire. | Exclusive spring action design to reduce user fatigue associated with slide hammer kickback. | 50” length, 80” fully extended. KN35926

Light and Heavy Truck Lug Wrenches

Use on most SUV’s, Pick Ups, heavy-duty trucks, buses, and tractors. | Forged steel construction for strength and durability.

KN35690 7/8” deep well, 15/16”, 1”, 1-1/16” $60.00

KN35695 1-1/16”, 1-1/4”, 1-1/2”, 13/16”SQ

KN35697 1-1/4”, 1-1/2”, 13/16”SQ, 3/4” Dr.

KN35795 24, 27, 30 and 33mm

Securely attaches to the wheel | Holds 3.6L of fluid | Fits most 22.5- and 24.5-inch, 10-hole hub or stud-piloted steel or alloy super single, wide-base and dual wheels. | Features a pair of self-draining shelves KN30600 Truck Wheel Well Axle

$173.00

$146.00

Deluxe Blue Cobra Truck Tire

SHOP EQUIPMENT AND TIRE REPAIR

base | 2 Built-in anvils provide more work surface area than any other vise | Jaw Width 8”, Opening 1114”, Throat depth 4”, Pipe capacity 1/8”-4-1/4” KN64800

Tire Mount/Demount Set

Two Nineteen-Five Bars for mounting and demounting tires | One Bead Holder for 19.5” aluminum wheels | One Solid Brass Bead Holder for steel wheels and one Leather Aluminum Wheel Protector pad $197.00

Deluxe Mega Airblast Bead Seater

Use on Auto, ATV, and Truck Tires | Designed for use on tires up to 24.5” diameter | CE Certified 5-gallon tank | Push-bitton release quickly releases air between bead and rim

Innovative “One-piece” Pusher won’t fall apart during use | Pusher is ball bearing-driven for near zero turning resistance | Includes two pullers to cover large and small dual wheel applications

LIFTING AND SHOP TOOLS

Pro Mechanics Vises

Enclosed design keeps lubrication in & contaminants out | Large anvil surfaces |360° swivel base with double lockdowns

V-jaw holds 1”.– 3”. diameter round stock vertically. | Jaw Width 5.5”, opening 5”, throat depth 2.75” | Pipe Jaw .58” - 2.75” | Positive locking swivel base rotates 360°

Table Vises Suspended 5D Design on 2

LIFTING AND SHOP TOOLS

Super Duty Bottle Jacks

LIFTING AND SHOP EQUIPMENT

2 Ton Engine Crane

Dual pump pistons rapidly reach max height 25% faster than single pump design | Low profile 4.7” legs designed to fit under wide range of vehicle frames including sports cars | 4 boom positions

SU5222

$1,047.00 Used for various shop applications including straightening, bending, and removing/installing gears, bearings, and bushing | Some accessories

Shop Presses

Sockets are used to remove truck lugs on most medium and heavy duty trucks | Metric sizes work on the import truck Budd wheels, and the 1-1/2” hex is for American-made trucks with dual rear wheels. | Set contains one each

Rotates components 360° | Integral 12-ton jack raises the work to provide the swing radius needed for clearance. | Includes the universal engine adapter assembly. | Optional mounting plates needed for specific engines OT1750A

$10,030.00

50:1 Ratio gearbox allows full rotation of mounted unit with just a turn of the crank and locks in position. | Equipped with a positive-crank handle locking mechanism. | Twin-post design, featuring laterally adjustable, 3-position outboard support

Simple and efficient method of moving a vehicle around a shop environment. | Can support up to 1,500 lbs. per unit while, at the same time, protecting the shop floor from damage. | Fits tread widths up to 12”.| Sold individually OT1580

Easy Roller Vehicle Mover

LIFTING AND SHOP EQUIPMENT

OTS020

SHOP LIFTING

Multiple hole locations make pin height adjustment quick and easy | Large V-shaped saddle supports and positions vehicle frame | Min/Max Height: 8.7”-36.62”

700 lb. Heavy Duty Pedestal Telescopic Transmission Jack Transfer transmission from jack to work table | Universal saddle with four ratcheting arms | Chain tie down fastens the load to the saddle | Overload valve | Lifting Range 50.8”-74”

Economical press for bending, pressing, and straightening work | Works great for removal and installation of gears, bearings, and bushings | 20ton bottle jack with 7-1/2” stroke. OT1824A

Popular Shop Lifting

CLEANING AND SHOP TOOLS

ZillaGreen Flexzilla Pro Water Hoses

Premium Hybrid Polymer Water Hose | Superior all-weather flexibility (35º to 150º F) | Withstands pressures of 150 PSI and burst 450 PSI | Rugged bend restrictor, Easily coils

Air and Water Retracting Hose Reel

Enclosed reel 1/2 x 50’ with auto rewind | Latching mode switch: Two position switch allows users to choose between free-run or latching mode | Swivel reduces flow restrictions | Easily mountable $324.00

24” Air Filter Radiator and Condenser Cleaner 90-Degree airflow provides focused high-pressure output of 24 CFM | Thoroughly cleans debris from inaccessible areas | Thumb trigger handle for an ergonomic feel and precise air control

Constructed of 15-1/2” industrial grade aluminum tube |Specially-designed nozzle increases pressure while providing maximum cleaning power | Equipped with adjustable flow control | Max 125 PSI

volume compact

for

Parts

Cleaning

Brushes

Brush heads resist mushrooming. | Durable injection molded handle with ribbed design for firm grip. | Trialoy polyester filament can be used in either petroleum- or water based cleaning solutions. | Time Saver brushes maximize cleaning for larger surfaces

Parts Washers

Self Closing Fusible Linked Fire Cover. | 40/20 Gallon tanks feature work shelves and parts baskets. | Safety GFCI Plug included. |

overall dimensions

Clears from 15ft | Gets to full throttle in 1 second | Designed for the landscape professional | Kit includes (1) HD12 Forge battery and rapid charger

MWK2824-20 Dual Battery Air Blower $387.00

Constant Power blowing 600 CFM and 145 MPH, providing the ability to take on demanding applications | Reaches full immediately | Variable speed sliding lock on lever | Requires (2) M18 Batteries for operation (not included)

2-Modes & variable speed trigger increase control | Compact size & rubber nozzle for tight spaces | Axial fan for best combination of power & run-time | Maximum Air Speed: 110 MPH (bare tool only)

CLEANING AND BLOW GUNS

Use for cleaning machinery, engines, and more | Use with detergents for best results. | Adjusting control regulates amount of cleaning agent to be mixed with compressed

Easier way to store microfiber rags | Easier to dispense than loose rags in a bag | Easily store and dispense 12” X 12” sheets | 30 Sheets per roll

AIR TOOL ACCESSORIES

Reel can swivel freely on a mounting bracket up to 135° or can be locked into place | Adjustable Hose Stopper | Lead-in Hose Included - 5 ft. x 1/4 in. MNPT | Flexzilla Pro Enclosed Plastic | Specs 1/4” fittings 3/8” x 50’ MTL8251FZP

Simply snaps into your coupler | Maximum inlet pressure of 150 pounds per square inch | Air flow of 15.9 standard cubic feet per minute at 100 pounds per square inch

AIR TOOLS AND ACCESSORIES

Extreme all-weather flexibility, even in subzero temperatures | Automatic Leveling SystemLayers the hose evenly when rewinding and reel will automatically lock hose in place at any length

Air Hose Reels

Oil-Resistant cords flexible in low temperatures and resists the effects of oil, water and sunlight. | Cord locks out in 1 ft. increments.

Pro Retractable Extension Cord Reels Lightweight air hose without memory. Works in Extreme temperatures without being restricted | 3/8” ID with 1/4” MPT | HZP features reusable ends if hose gets damaged

Air Hoses

CORDLESS AND AIR IMPACT TOOLS

Up to 3000 Ft/lbs. of Nut Busting torque | 3 speeds and torque settings give users the flexibility to take better control of their tightening needs | Kits include (4) 5amp batteries and a dual bay charger

Perfect for truck and heavy equipment maintenance | Compact for working on suspension components, tractor pads, and other big capacity repairs | Maximum torque: 1,450 ft.-lbs. (1,972 Nm)

1450 Ft./lbs. Of maximum torque with a 5,000 rpm free speed and

AIR IMPACTS AND RATCHETS

TIMING FLUID AND OIL SPECIALTY

Master Ford Timing Kit

Comprehensive for models with 1.4L, 1.5L, 1.6L, 2.0L, 2.3L & 2.5L which are all variations of the EcoBoost, Duratec(Flex Fuel) & GTDI engines

CM2221

BMW Cam Alignment Tool Kit

Includes jig to align camshafts during assembly and TDC pin to align the flywheel. | Services BMW M42, M44, M50, M52, M52TU M54, M56, S50US & S52US engines.

CM2885

Volvo Timing Tool Kit

Holds the engine when replacing the timing belt. | For vehicles with the 8-speed automatic TG-81SC transmission. | Applications: 2.0L - S60, S80,V60, 70, XC60, XC70 & XC80.

Removes the broken entry point piece near the oil pan when the dipstick breaks | Use with a slide hammer to thread into tube to remove. | Fitments Ford (4.6L, 5.4L, 6.2L & 6.8L), Dodge (5.7L & 6.1L) & GM (4.8L, 5.3L, 5.7L, 6.0L & 6.2L) V8 engines.

Used for removing plastic drain plugs found on many late model vehicles. | Will NOT damage drain plugs | Contains a T-handle with a square drive ball lock and 7 adapters CM1320

64MM reaches all caps and housings | Heavy-welded steel for precision fit & high torque | Fits many OE spin on filters on Asian cars

CM2864 Volvo Cam Tool

For alignment of the cam and crankshafts | Also enables correct installation of the camshaft with the cam cover. | Works on models 850, 960, S40, S70 & S90.

Specialty Asian Filter Wrenches

OIL REPAIR SERVICE

Swivel Oil Filter Wrench Sets

OIL REPAIR SERVICE

Oil Filter and Pipe Turning Pliers

Use for various size filters or round tube removals where leverage and torque are needed | Accommodates filters, PVC, conduit and fittings

Use with a 1/2” drive ratchet for best torque and leverage | For use with larger hard to remove oil filters | Designed for the high torque requirements of truck filters | 3” Wide and narrow band styles allow for use on most large

Swivel Oil Filter Wrenches

Swivel tension is adjusted easily by using the nut and bolt on the handle | Unique yoke and link assembly allow a good grip, but will not crush the filter

Pro Swivoil Oil Filter Wrenches

180 degree swivel action | Cushion grip dual material handle provides and better gripping force. | Dimpled for extra gripping power | Specially designed to fit today’s oil filters

Dual position jaws | Fine adjustment screw for precise loosening and tightening | Locks tight with the squeeze of one hand | Works with oil filters from 2-1/2 to 5-1/2”

Two-position, slip-joint handle produces the range of three separate conventional

wrenches. | Overall range 2 1/4” to 4”. | Jaws are bent at a 20° angle and feature sure grip teeth $35.00

Oil Filter Torque Adapters

ENGINE AND OIL SERVICE

Clear funnel allows a quick visual check of the fluids | Comes with a lid to keep contaminants out as well as store the caps and adapters. | Eliminates trapped air pockets which usually cause erratic system performance.

The unique tapping tool ensures the new thread will be perpendicular to the gasket surface to prevent leakage. | Works on soft steel and aluminum oil pans with 1/2”, 12mm & 14mm threads. Can be used on the vehicle when room permits.

14 Piece Turbo Test Kit With Smoke

Includes T-Adapter for Connecting Smoke Machines | Plugs the output side of the turbo and the intake inlet. | Features a pressure gauge, shut off valve and pressure regulator and six pairs of stepped adapters

Oval offers 60% Larger Catch Area for Easier Fluid Draining.| 6.25” pan height to fit tight spaces. 1.125” outer diameter spout for quick and easy pouring of used fluids

polyethylene material enables the user to read the oil level on the container | 19702 features a cap and spout cap to keep out contaminants.

Release Height Adjustment | Specially shaped, translucent jug and reinforced base will not warp with hot oil | Has a wide working range from 36 1/2” to 74”. | A lower center of gravity increases stability. $188.00

Gallon Oil Drain on Wheels

Translucent jug holds 18 gallons and will not warp with hot oil. | Rolls easily with four heavy-duty 2 1/2” wheels. | Metal tubes extend working area from 36 1/2” to 77”. | Drains from the bottom with a spigot.

EXHAUST SERVICE

A convenient, inexpensive alternative to hydraulic pipe expanders | Stretches pipe many types of pipe Including stainless steel. | Use with an impact wrench to easily fabricate pipes to widths needed

Tailpipe Expanders rounds out and shape pipes for repair | Practical, rugged tools that make easy work of a tough job | Use on or off the car

Tail Pipe Connectors

Used with exhaust hoses to connect directly to the tail pipes | Extends hose life by deferring vehicle heat

For use on all types of tailpipes, mufflers and exhaust systems. | Designed to quickly and easily straighten out clamp dents in mufflers and tailpipes. | Works with all 1-1/8” to 3-1/2” inner diameter thin-wall pipes

Dual Exhaust Hose Sets

Designed for converting single hose into dual exhaust systems. Includes (2) 4’ hoses, (1) Y connector (2) tailpipe adapters | 575 Features the 3” x 8.5” Oval adapters

Bypass Wrenches

Used for expanding mild steel exhaust pipes to make perfect exhaust seals fabrications | 28mm Included in this kit drives the tool and the collet sets expand pipes from 1-5/18 to 4-1/4. | Use with an impact for fast repairs

can be used on most import and domestic car and

SPECIALTY WRENCHES

Chrome Vanadium for 30% more strength and durability, as well as chrome plating to prevent rust, corrosion and deformation. | Flarenut are 3/8” drive, others are 1/2” drive.

Dual-direction off-corner loading on open-end reduces fastener rounding | Large color-coded markings

Extends the natural length of the wrench and provides extra torque | Fits most hex, Allen key, TX, XZN and socket wrench tools | Safer than using a cheater bar, snipe, extension pipe or other improvised torque multiplier tool

SPECIALTY WRENCHES

6 Piece Metric Deep Spline Flex Head Ratcheting Wrench Set

Dual indexing flex head design reversible 72 tooth ratcheting wrenches | Deep design is ideal for recessed and long-threaded fasteners | Spline drive works on 6pt/12pt/Torx/Torx Plus |

VMDDF100A

XL Deep Flex Head Ratcheting Wrench Set

Ideal for recessed and long-threaded fasteners | Reversible 72 tooth, head is fully repairable | Spline drive works on 6pt/12pt/Torx/Torx Plus | 6 Piece set | Sizes 8, 10-14, 17mm

Wrench

Works with almost any wrench, an easy way to generate more torque. | Ideal for loosening stubborn nuts and bolts in hard to reach areas. | Handle is made up of durable and comfortable material.

Hi-Viz Wrench Racks

Gripping teeth accommodate a wide variety of wrench sizes. | Folding handle saves space in the drawer. Fits in shallow toolbox drawers. | Made from soft, flexible material.

Telescopic Handle and Wrenching Attachments

Buy the handle and any or all attachments | Build a tool using the Extendable handle | Locks in 3 different positions

Raised Panel Combination Wrench Sets

Chrome Vanadium for more strength and durability, as well as chrome plating to prevent rust, corrosion and deformation. | Most sets include storage canvas

Wrenches feature the V-Groove long pattern design to offer better leverage and tighter security on the fastener

Angle Head Wrench Sets

Chrome Vanadium and plating to prevent rust, corrosion and deformation | V-Groove design aligns better with the fastener | 15 and 60 degree angled heads

Service wrenches are used through many industries, but most useful in aviation, diesel, and agriculture. | Low profile most used sizes squeeze into tight areas | 11 Piece sets

30° Service Wrench Sets Fits hydraulic cylinders on equipment and vehicles

V-Groove Combination Wrench Sets

STORAGE AND SHOP NEEDS

TOOL STORAGE AND SHOP NEEDS

Shop Fans and Air Movers

Twist Lock Socket Clips keep sockets secure - even when turned upside down. | Great for transport and has push button release tabs to remove individual rails.

Hi-Viz Twist Lock Socket Holders

SOCKET HOLDERS/TOOL STORAGE

12” Magrail Socket

SOCKET HOLDERS/TOOL STORAGE

Socket Holding Racks

Pliers Rack

Holds pliers and wrenches vertically | Thirteen slots thin and wide for

Accepts standard and deep sockets | Sizes marked on rails for easy identification | Super strong magnet for solid placement

Anodized Socket Holders

1/2” Peg Style Socket Organizing Racks

Wrench Pro Holders

Modular design fits size range 6 to 38mm or 1/4” to 1-1-2” | Works well with all wrench types | Labels included to easily see wrench sizes | Innovative geometry aligns wrenches for a uniform presentation | Magnetic style provides more secure mounts

SPECIALTY HAND TOOLS

Ratcheting Wrench Sets

Modular

SPECIALTY HAND TOOLS

Specialty Stubby Socket Sets Longer, more ergonomic beam than traditional ratcheting wrenches| 90T and Double flex with a 4 degree swing arc for improved access| Exceptional accessibility

Mini Master Chrome Socket Sets

Sets feature 120XP™ Ratchets with a Double-Stacked Pawl design delivering 120 Positions of exceptional torque performance | Metric and SAE comprehensive sizes deep and standard 6 pt. with extensions and a universal joint

KD80300P 51-Pc 1/4” Drive $127.00

KD80550P 56-Pc 3/8” Drive

Ultra shallow height “STUBBY” sockets to work in restrictive areas | Ratchet sets include Locking flex ratchet, extensions, and universal joint

KD81390 15 Pc 1/4” Dr 4-14mm W/Ratchet

KD81391 14 Pc 1/4” 3/16-9/16” W/Ratchet

KD81392 18 Pc 3/8” Dr 6-19mm W/Ratchet

KD81393 16 Pc 3/8” Dr 5/16-1” W/Ratchet $125.00

KD81394 12 Pc 1/4” Dr. 4-15mm Sockets Only $38.00

90-Tooth ratchets have a 4° swing arc and low-profile head to give easier access to hardto-turn fasteners. | Flex head stays in place for one hand operations

KD81204T 2 Pc 1/4” 3/8” 90T Cushion Grip Flex Head Ratchet Set $105.00

90-Tooth ratchets have a 4° swing arc and low-profile head to give easier access to hardto-turn fasteners. | Flex head stays in place for one hand operations

KD81230T 4 Pc 1/4” 3/8” & 1/2” 90T Tooth Full Polish Flex-Head

Long Pattern Combination Wrench Set with Surface Drive Plus on Open Sides for Better Fixture on the Fastener | Sizes 6-24, 27, 30 and 32mm

SPECIALTY SOCKETS AND ACCESSORIES

set includes 1/4”, 3/8”, & 1/2” that can lock in a fixed straight position or swivel

SPECIALTY WRENCHES SOCKETS ACCESSORIES

Indexing head for ease of use and enhanced maneuverability. | Cr-V alloy steel body with CrMo head.| Ergonomic dual durometer handle.

and superior appearance.

1/4” & 10MM | Thin profile allows for use in tight areas | The smallest, lowest profile head in the industry | The quick-disk on the drive head allows for quick tightening or loosening VMHBR1046A

9” long 1/2” drive 6-point pinless impact universal extension sockets | Heavy-Duty TORQUE-SAVER design minimizes torque loss | Durable 100% pinless design with 360° of freedom AO78254

Multipurpose tool, the spring-loaded adjustable jaws allow you to firmly grip various types of fasteners and even remove damaged ones

TORQUE WRENCHES

Engineered, precision bearing surfaces extend the calibrated life of the M line to as many as 60,000 cycles or more and ensure the most reliable performance possible | External calibration for easier service | Accurate to 3% of reading from 20% of full scale clockwise and counterclockwise

Torque Wrenches

Accurate to 2 percent of the reading from 20 percent of full scale to full scale

Heavy Duty Torque Wrenches

standards. | Quick release reversible ratchet. | Calibration Certificate included, 100% traceability. | +-3% CW & +-5% CCW accuracy.

Professional grade 3/4”

1/2” Drive Digital Torque Wrench

TN23137

3° Ratcheting arc to turn fasteners in narrow spaces | Torque accuracy of +/- 3% CW | Ratcheting head flexes up to 15° for improved access in narrow work spaces

3/8” Split Beam Torque Wrench

The

1/2” Split Beam Flexible Torque Wrench

The perfect solution to counter abusive environments that call for robust

operation. | 3/8” Flex ratchet, 20-100lb.ft, 2lb. ft, 17 5/8” long $216.00 PIC3FR250F

TORQUE WRENCHES SOCKETS AND DRIVE TOOLS

Torque Multipliers

TORX HEX AND DRIVE TOOLS

IMPACT SOCKETS AND SETS

Metric Hex Drivers

Fractional Hex Drivers

1/8" 9904F 5/32" 9905F 3/16" 9906F 1906F 19064F 19066F 7/32" 9907F 1907F 19074F 19076F 1/4" 9908F 1908F 19084F 19086F 2908F 29084F 29086F 9/32" 1909F 19094F 19096F 2909F 29094F 29096F 5/16" 9910F 1910F 19104F 19106F 2910F 29104F 29106F 3/8" 9912F 1912F 19124F 19126F 2912F 29124F 29126F 7/16" 1914F 19144F 19146F 2914F 29144F 29146F 1/2" 1916F 19164F 19166F 2916F 29164F 29166F 3916F 9/16" 2918F 29184F 29186F 3918F 5/8" 2920F 29204F 29206F 3920F 4920F

IMPACT SOCKETS AND SETS

4mm 904MS 904MDS

4.5mm 945MS 945MDS

5mm 905MS 905MDS 905UMS 905UMD

5.5mm 955MS 955MDS 955UMS 955UMD

6mm 906MS 906MDS 906UMS 906UMD

7mm 907MS 907MDS 907UMS 907UMD

8mm 908MS 908MDS 908UMS 908UMD

9mm 909MS 909MDS 909UMS 909UMD

10mm 910MS 910MDS 910UMS 910UMD

11mm 911MS 911MDS 911UMS 911UMD

12mm 912MS 912MDS 912UMS 912UMD

13mm 913MS 913MDS 913UMS 913UMD

14mm 914MS 914MDS 914UMS 914UMD

15mm 915MS 915MDS 915UMS 915UMD

3/16" 906RS 906DS

7/32" 907RS 907DS

1/4" 908RS 908DS 908US 9/32" 909RS 909DS

5/16" 910RS 910DS 910US 11/32" 911RS 911DS

3/8" 912RS 912DS 912US

7/16" 914RS 914DS 914US

1/2" 916RS 916DS 916US

9/16" 918RS 918DS 918US

2028U 2028UD

2030R 2030D 2030XD 2030U 2030UD 1" 2032R 2032D 2032XD 2032U 2032UD

2034R 2034D 2034XD 2034U 2034UD 1-1/8" 2036R 2036D 2036XD 2036U 2036UD 1-3/16" 2038R 2038D 2038XD 2038U 2038UD

1-1/4" 2040R 2040D 2040XD 2040U 2040UD

1-5/16" 2042R 2042D 2042XD 1-3/8" 2044R 2044D 2044XD

1-7/16" 2046R 2046D 2046XD 1-1/2" 2048R 2048D 2048XD

1-9/16" 2050R 2050D

1-5/8" 2052R 2052D 1-11/16" 2054R 2054D 1-3/4" 2056R 2056D 1-13/16" 2058R 2058D

1-7/8" 2060R 2060D

1-15/16" 2062R 2062D 2" 2064R 2064D

2-1/16" 2066R 2066D 2-1/8" 2068R 2068D

2-3/16" 2070R 2070D 2-1/4" 2072R 2072D

IMPACT SOCKETS

3/4” Drive Std Lgth Deep Lgth

2-5/16" 3074R 3074D

2-3/8" 3076R 3076D

2-7/16" 3078R 3078D

3018R 3018D

5/8" 3020R 3020D

11/16" 3022R 3022D

3/4" 3024R 3024D 3024U

13/16" 3026R 3026D 3026U

7/8" 3028R 3028D 3028U

15/16" 3030R 3030D 3030U

1" 3032R 3032D 3032U

1-1/16" 3034R 3034D 3034U

1-1/8" 3036R 3036D 3036U

1-3/16" 3038R 3038D 3038U

1-1/4" 3040R 3040D 3040U 1-5/16" 3042R 3042D 3042U

1-3/8" 3044R 3044D 3044U

1-7/16" 3046R 3046D 3046U

1-1/2" 3048R 3048D 3048U

1-9/16" 3050R 3050D 3050U

1-5/8" 3052R 3052D 3052U

1-11/16" 3054R 3054D 3054U

1-3/4" 3056R 3056D 3056U

1-13/16" 3058R 3058D 3058U

1-7/8" 3060R 3060D 3060U

1-15/16" 3062R 3062D

2" 3064R 3064D

2-1/16" 3066R 3066D

2-1/8" 3068R 3068D

2-3/16" 3070R 3070D

2-1/4" 3072R 3072D

4051M 4051MD

4052M 4052MD

4053M 4053MD 54mm 4054M 4054MD 55mm 4055M 4055MD 56mm 4056M 4056MD 57mm 4057M 4057MD

58mm 4058M 4058MD

60mm 4060M 4060MD

62mm 4062M 4062MD

63mm 4063M 4063MD

65mm 4065M 4065MD

67mm 4067M 4067MD

70mm 4070M 4070MD

75mm 4075M 4075MD

76mm 4076M 4076MD

77mm 4077M 4077MD

78mm 4078M 4078MD

80mm 4080M 4080MD

85mm 4085M 4085MD

90mm 4090M 4090MD

4095M 4095MD

40100M 40100MD

40105M 40105MD

40110M 40110MD

40115M 40115MD

2-1/2" 3080R 3080D

2-9/16" 3082R 3082D

2-5/8" 3084R 3084D

2-11/16" 3086R 3086D

2-3/4" 3088R 3088D

2/13/16" 3090R 3090D

2-7/8" 3092R 3092D

2-15/16" 3094R 3094D

3" 3096R 3096D

1-1/16" 4034R 4034D 4034U

1-1/8" 4036R 4036D 4036U

1-3/16" 4038R 4038D 4038U

1-1/4" 4040R 4040D 4040U

1-5/16" 4042R 4042D 4042U

1-3/8" 4044R 4044D 4044U

1-7/16" 4046R 4046D 4046U

1-1/2" 4048R 4048D 4048U

1-9/16" 4050R 4050D 4050U

1-5/8" 4052R 4052D 4052U

1-11/16" 4054R 4054D 4054U

1-3/4" 4056R 4056D 4056U

1-13/16" 4058R 4058D 4058U

1-7/8" 4060R 4060D 4060U

1-15/16" 4062R 4062D 4062U

2" 4064R 4064D 4064U

2-1/16" 4066R 4066D

2-1/8" 4068R 4068D

2-3/16" 4070R 4070D

2-1/4" 4072R 4072D

2-5/16" 4074R 4074D

2-3/8" 4076R 4076D

2-7/16" 4078R 4078D

2-1/2" 4080R 4080D

2-9/16" 4082R 4082D

2-5/8" 4084R 4084D

2-11/16" 4086R 4086D

2-3/4" 4088R 4088D

2/13/16" 4090R 4090D

2-7/8" 4092R 4092D

81 Piece set of 3/8” Drive 6 point sockets and universals with extended range | Includes a 3” extension, u-joint and 1/4” hex to 3/8” square adapter | 81 piece set contents: Deep and Shallow 5/16”-1” and 7-22mm; Universals 5/16-1” and 10-19mm

GY1281

The highest quality chrome-molybdenum alloy steel. | Exact heat treatment ensures the correct balance of strength and durability for high impact jobs. | Set contains 6–Point Universal sizes 10mm to 19mm.

GY1326M 1/2”

IMPACT SOCKETS

IMPACT SOCKET SETS AND PLIERS

3 Piece Cobra Water Pump Plier Set

Box joint construction with press button action for fast & firm adjustment directly on the workpiece | Jaw opening is slim and positively ensured | Includes a 7” 10” and 12” $139.00

KX3X87

3 Piece Alligator Pliers Set 7”10”12”

Full compliment of extensions provides access to virtually all recessed fasteners | Universal Joint adapts any socket for use in swivel applications | Includes Deep and Shallow Sizes 3,5,10,15” extensions and u-joint

SU2568 3/8” to 1 1/2”

SU2569 9 to 30mm

Create a secure grip from pressing down on the top handle - no extra hand torque is needed | Gripping teeth are hardened for a longer tool life | Includes: 7”, 10” and 12”. $108.00

KX3X88

3 Piece Hi Lev Diagonal Cutter Set

High leverage design produces fast and easy cuts | Forged axle provides better cutting performance and longer tool life | Contains 6 & 10” straight cutters and 8” angled cutter

KX002005S2

3 Piece

Great Companion to your air and cordless impact wrenches | Expanded size ranges 7-22MM Deep, shallow and universals | 3” Extension, U-Joint, 3/8” Dr 1/4” Bit Holder SU3351

51 Piece 3/8” Drive Metric Master Impact Socket Set $235.00

84 Piece 3/8” Dr. Master Hex Bit Impact Socket Set $261.00

Cr-MO for durability | Includes Hex Bit SAE & MM, Star Bits, Stubby Bits, Tamperproof Star and Triple Square | Packaged in compact blow molded case for durable, convenient storage and transport SU3569

80Piece set | 6pt. Std. and Deep 5/16”-– 3/4” and 8mm – 19mm, Universal Sockets 3/8” –3/4” and 0mm – 19mm, Torx from E5 – E16, T20 – T55,3, 5, 10, 15” extensions, and u-joint SU3580 3/8” Drive Master Socket Accessory and Torx Set

IMPACT SOCKET AND ACCESSORY SETS

Stamped and ink filled diameter markings for wear resistance | 6-Point forged impact steel | Non-slip hex geometry to prevent socket and fastener rounding

IMPACT SOCKETS AND PLIERS

5 Pc. 1” Drive | Radius corners to grab the sturdy wall of the fastener | 4 Square Budd Wheel Sockets: 1-1/2” x 13/16”, 35mm x 17mm, 38mm x 20mm, 41mm x 21mm and 1 Deep Socket: 33mm

1” Drive 10 Piece Impact Truck Socket Set

1” Drive SAE and Metric most need truck size wheel sockets | Deep 33mm, 1”, 1-3/16”, 1-3/4” | Thin Wall Deep - 1-1/16”, 1-1/8”, 1-1/4” | Square - 13/16”, 15/16” | Controlled Depth - 1-1/2” $261.00

1” Drive 8 Piece SAE/Metric Wheel Service Set

Long Grip Pliers Set

13” Long Pliers Set provides the best access and maximum grip force. | Pliers feature a DeepReach Cross Handle design which delivers a wide jaw opening while maintaining a slim profile for extended reach in tight spaces.

MWK48-22-6563

No skipped sizes from 17mm to 30mm | 22mm outside hex to use with a wrench | 75% shorter than standard shallow impact sockets | Pairs well with Astro 78218 18” long ratcheting wrench AO78214

NANO Drive Adapter Sets

For use with NANO ratcheting wrenches allowing them to drive and retain traditional socket and hex bit designs | Includes square drive adapters in 1/4”, 3/8” & 1/2”, a wobble adapter, and 1/4” hex bit

Forged from high quality CR-MO Alloy Steel | 1 1/16” Thin wall deep, 1 1/2” Controlled depth, 1 1/4” Thin wall deep, 1 1/8” Thin wall deep, 1” Standard, 13/16” Square, 7/8” Standard, 33mm Standard $172.00

SU5688

1” Drive 7 Piece Deep Metric Truck Impact Socket Set No-Slip design in forged Cro-moly. | 1” drive sockets | Set includes: Deep - 27, 33, 35, 36, 41mm Square - 17, 21mm $188.00

SPECIALTY PLIERS

Faster tool setup and more locking force for the professional tradesman. | Thumb screw provides a more convenient geometry for hand force | Most popular sizes for general and automotive repair use

Forged blades deliver up to 10X more cuts than cast blades. | Bolt Lock ensures the blades won’t loosen and chrome plating provides rust protection. | Includes Left, Right, and Straight Aviation Snips.

SPECIALTY PLIERS

Cuts Mild Steel and Soft Cable Precision milled and drop forged steel jaws. | Drop forged heat treated alloy steel construction handles. | Rubber hand grips for comfort and control. | Cuts up to 5/16”

Plier

Bolt Cutters cut through pre-stressing steel and tempered steel wire up to a hardness of 48 HRC and are extremely hard-wearing. | Long life results from the use of high performance Chrome Vanadium steel for the blades. | Precise adjustment of the blades by eccentric bolts.

Industrial Duty Bolt Cutters

Exceptional

compared to conventional high leverage diagonal cutters | Cuts materials like bolts, nails, rivets, etc. | 6”, 8” 10”

Combines the functions of pliers and wrenches in one tool | Replaces a full set of inch and metric open end wrenches | Smooth jaws for damage

SPECIALTY PLIERS AND EXTRACTORS

Remove nuts, bolts, studs that are impossible to remove. | 6 Spiral Flute Extractors EX-1, to EX-6, 13 Multi-Spline Extractors 1/8” to 1/2”, 13 Bolt Extractors 1/4” to 19mm | 16 Left-Hand Cobalt Drill Bits 5/64” to 1/2”

35 Piece Master Screw Extractor Set with Cobalt Bits

The complete set for broken fastener removal |Spiral Extractors (Ex-1-Ex-6) | Thirteen Multi-Spline Screw Extractors (1/8”-1/2”) | Sixteen Left Hand Cobalt Drill Bits (5/64”-1/2”)

HA11135

$229.00

Heavy duty jaws lock on to three sides of a hex fastener and will not slip or mar | Each pliers designed to replace up to 16 wrench sizes | Guarded release trigger quickly unlocks and protects from accidental release

10 Piece Screw Extractor Set with Cobalt LH Drill Bits

Aggressive left-hand spiral design provides extra gripping power | High speed left hand drill bits ensures fast drilling | 5 Fluted Screw Extractors EX-1 thru EX-5 with 5 corresponding LEFT-HAND Cobalt Drill Bits. $55.00

Vise Grip Locking

EXTRACTORS AND THREADING TOOLS

Irwin Industrial Tools sets the standard for delivering quality every step of the way in your threading applications | Whether creating new tools form raw steel or repairing damaged and worn threads | Kits include driving tools and accessories

Tap Socket Set For Use in Restricted Areas. Ideal for use in areas where a T handle won’t fit. | Makes taping with a ratchet faster than use with normal tap drive tools

Tap and Die Sets

Features the most used sizes 3-12mm | Pipe Thread Plug Tap and 1” Hexagon Dies in sizes: 1/8” - 28 BSP | Includes threading tools and most common accessories HA26317

Precision cut threads accurately formed for consistent and exact threading | Sets includes: 2 T-handle tap wrenches, 0 - 1” adjustable tap wrench, 1” adjustable die stock and pitch gauge

Degree ratcheting arc with reversible lever eliminates hand over hand turning and reduces “back walk | Extension adapters provide access in tight confined areas | 4-40 to 3/4” and 3 to 18mm sizes

40 Piece Tap and Die Sets

EXTRACTING AND SPECIALTY CLEANING TOOLS

Turbo Socket Damaged Nut Removal Kits

Ideal for removal of broken studs and bolts in tight areas. | Featuring a 135° split point left hand drill bits: 1/8”, 3/16”, 1/4”, 5/16”, 3/8” | Square Extractors: SQE1, SQE2, SQE3, SQE4, SQE5 KW10KK7-LHSQX

10 Piece Left Hand Drill and Extractor Set $127.00

Designed to Remove Rounded or Stripped Fasteners with Internal Drive Heads. | Ten sizes of extractors fit Torx® and Torx Plus® sizes | T-10 to T-55; internal hex sizes 7/64” to 3/8” and 3mm to 10mm.

LS61980

10 Piece Stripped Screw Extractor Set $38.00

6 Piece Set Tap Extractors Set

Remove broken taps without drilling, damaging threads, scrapping parts or having to use repair inserts. | The hardened steel fingers fit in the flutes of a broken tap to back it out. | Sizes 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” $151.00

WTN18001

Stud Remover Sets

Designed for R&R to reach studs in difficult work areas | Roller bearings effectively put even pressure on the stud for removal

SPECIALTY EXTRACTING AND TORX

Reversible 3/8” Drive Impact Driver with 48 Impact Bits

Heavy weighted impact driver for increased torque output | Works with any 3/8” Dr. impact socket or 5/16” impact bit. | Can be used to removed rusted, corroded, and over tightened fasteners.| Includes screwdriver, torx, hex, & triple square bits

8 Piece Impact Bit Sets Bit Set

S2 Steel for rigorous impacting with Vims HD Impact Driver or other brands | 5/16” shank bits are heat treated to avoid chipping and breakage

8 Piece T30 Torx Driver Master

Includes every type of T30 driver needed for various applications | Long-reach drivers for deep access, stubby drivers for tight spaces, includes UJ swivel adapter, and impact-rated options for heavy-duty use | Packed on green magrail $53.00$53.00

12 Piece External TORX Socket Set

Features four parallel flat sides, which deter rolling and are wrench-compatible | Laser-engraved sizes for easy identification | Chrome plating for rust and corrosion protection | Includes E4-E24

Impact Driver Sets

Loosens Rusted, Frozen Nuts, Bolts and Screws. | Unique design delivers “Shock Torque.” | Can be reversed to tighten. | Can also be used with impact sockets | Includes bit holder and bits

Optimized geometry to grip and remove the most demanding stuck, rounded over, rusted, painted on, stripped, and damaged fasteners. | Includes a 1/4” Hex to 3/8” Square Socket MWK48-32-8000

Shockwave Impact Extractor Set $26.00

Use to loosen and tighten screws, nuts and bolts | Special handle reduces risk of injury when striking driver with hammer | Includes 8 standard and long length interchangeable bits | Driver is easily reversible for tightening applications

Tip has a center point so no additional center punch is required when centering the drill hole | Four double-edged cutting/gripping edges for 8 points of left or right contact

Removes broken screws, bolts, and studs | Tapered square extractors cut into drilled studs bolts or fasteners for quick removal. | Design eases extraction

Double Edge Bolt and Screw Extractor Sets

Square Screw Extractor Sets

Dual Drive Nano Universal Socket Sets

PICK UP TOOLS KNIVES AND SCRAPERS

The magnet slide ring shields the sides from attaching to unwanted metal surfaces | High powered magnets maintain lift strength throughout the life of the tool | Tools telescope for maximum reach

Good for automotive and electrical work, especially in tight spaces

Pocket Pry Bars

For use when removing seals, electrical connectors, plastic clips, O-rings, plastic caps, interior trim pieces, metal and plastic retainers.

Weld Buster Set

Two piece set quickly separates spot welded panels or other narrow spreads without damage. | Hardened steel. | Cushioned grip for comfort.

16” Extra Long Sticker Scraper

Extra Long Sticker Scrapper angle edge razor blades and Specially designed to access steep, sloping windshields and other hard-to reach places. | Supplied with 5 standard steel razor blades and 1 plastic blade.

Winged blades help prevent damage and scratches to the pinch weld. |

HV Handle Carbide Scrapers

Pocket Pry Bar Sets

PRYBARS PICKS PUNCHES

Shaft runs from the cutting edge through the handle pounding cap | Two handed composite handle insures better grips | Black oxide finish prevents corrosion

Dominator

6 Piece Progrip Long Pick Set

Highly-resilient Polypropylene | Two patented ribs around its neck to allow for maximum transfer of torque from the hand to the tool

x 14” & 5/8 x 20” | Black oxide finish is added to deter rust.

Oxide with a rust preventative coating | Includes: 1/4”-3/4” Chisels, 3/32”-1/4” solid punches, 3/32”-5/16” pin punches, 3/32” line up punch, 5/16” prick punch, 3/8” and 1/2” center punches and a holder MH62287 20 Piece Pro Series Punch and Chisel Set

ENGINE WHEEL AND SPECIALTY

20 Piece Master Spindle Rethreading Dies

20 Piece set will repair or renew damaged threads on stub axles/spindles on most vehicles | Sizes 11/16 to 1”-14 and M16X1, to M27X2

12 Piece Combination Internal

Snap Ring Pliers Set

Includes 12 fixed tip pliers | Sizes .038, .047, .070, and .090 in 0-degree, 45-degree and 90-degree angles | Pins are hardened steel to handle stubbornly locked situations

Used for adjusting Rockwell Automatic Slack Adjusters | Consists of a forked-end tool to release the tensioner button, and a 5/16” double square offset reversible wrench

for testing

Rethreading Die Sets

Rethreading hexagon dies for repairing damaged bolts or studs | Rethreading dies are made from high carbon alloy steel for a long tool life

Services CV shaft, wheel hub, axle shaft, cam shaft, etc. |Includes 12 pairs of tips | Max Jaw opening width: 82mm, min width 8.25mm CM4031M

for use on internal/external snap rings | Switches from one to the other with a turn of the knob and slipped down and up to change configurations. | Sizes .038, .047 & .090 and only in straight and 90 degree angle. LG3597

Striker Pry Bar Sets

Keys made with alloy steel for maximum strength and to resist rotational distortion | Chamfered edges on both ends | Comfort dual material grip allows for added torque and non-slip use | Use as short or long arm

HEX TORX AND DRIVING TOOLS

T-Handle Ball End Hex Key Sets in Stands

Bit Holders

HEX TORX EXTRACTORS AND DRIVING TOOLS

• For

and damaged fasterners

• Up to 400% more torque on damaged hex fasterners

• Up to 50X more torque on new hex fasterners

• Professional grade S2 Steel

hex fasterners

• Low torque

• Lower grade steel prone to rounding

• Outdated design causes dam age to the hex head

RPT Shallow Socket Extractor Sets

132 Piece R.P.T. Multi-Bit Set

RPT Technology enables loosening & tightening of new and damaged fasteners | Designed to prevent rounding | 50% more torque on NEW fasteners | 400% more torque on damaged fasteners | Laser etched size markings for easy identification $193.00

38 Piece Master RPT Hex Driver Set

Replaces standard hex tools | Bi-directional design enables loosening & tightening of hex fasteners | Prevents rounding of fasteners | Provides up to 50% more torque on NEW fasteners and up to 400% more torque on damaged fasteners | Sizes include 1.5-19mm, 1/16-3/4” $424.00

Bi-directional design enables loosening & tightening | Prevents rounding of fasteners | Provides up to 50% more torque on NEW fasteners and up to 400% more torque on damaged fasteners | Sizes include T6-T60 GTST14LS

RPT Impact Hex Driver Sets

14 Piece Long RPT Star Driver Set

SPECIALTY HAND TOOLS AND BIT SETS

Set includes: VM606 6MM, VM607 7MM, VM608 8MM, VM610 10MM, VM611 11M, VM612 12MM, VM613 13MM, VM614 14MM, VM617 17MM, VM619 19MM $68.00

HAMMERS AND SPECIALTY WRENCHES

4 Piece Fiberglass Body and Fender Set

Most used body shop tools for general metal reshaping | Pick Hammer | Curved Hammer | Dinging spoon |Dolly block

4 Piece Hammer Set Fiberglass Handles

Constructed with a rugged fiberglass shank, vibration absorbing rubber grip| Includes: Door Skin, General Purpose Pick and Utility Pick Hammers and a Curved Chisel Hammer

Angle Combo Wrench Sets

Piece Stubby Combination Wrench

Jumbo Combo Wrench

SPECIALTY SOCKET SETS

3/8” Drive Nano Impact Hex

SPECIALTY SOCKET SETS

Off-corner loading design reduces fastener rounding | Chamfered opening quickly guides fasteners into the socket | Bright, full polish chrome finish easily wipes clean and resists corrosion

Off-corner loading design reduces fastener rounding | Hard stamped size markings | Double line (SAE) and knurled (metric) ring help easily identify standard and metric sockets | Includes 2 socket rails | Sizes include: 6mm-19 mm KD86540

90-Tooth gear delivers a 4° swing arc to turn a fastener in tight confines | 6 point full polish chrome SAE and metric 1/4, 3/8” and 1/2” standard sockets | Sits in a premium precut EVA foam tray KD86529

Ball detent for secure socket retention | Extensions feature knurled grip | Universal joint allows for greater access and includes increasing /reducing

SCREWDRIVERS DRIVING TOOLS

Sizes 2x4” and 3x6” impacting drivers that twist when hammered | Tang-Thru shank and a steel cap with cam rotation mechanism adds extra leverage to remove stuck fasteners VS9802SC

Forged hexagonal bolster for additional wrenching | Phillips JAWSFIT tip firmly grips screws | High wear-resistance and durable fully hardened blades with magnetized tips VS9308EVA

36 Tooth gear for anti-fatigue | Non-step slim covered blade shank for preventing electrical short circuit | Use as a stubby ratchet by popping off the blade and inserting 1/4” Hex bits

with

BODYSHOP AND DRIVING TOOLS

Tips are custom machined to and reduce stripping | Laser etched to increase gripping surface. | Wrench-ready bolster

7 Piece Insulated Electrician Screwdriver Set

Magnetic drive tips |Insulated blades for applications up to 1000V AC and 1500V DC | Contoured cushion grip handles | Sizes include: Slotted: 1/8” x 3”, 5/32” x 4”, 7/32” x 5”, 1/4” x 6”, Phillips: #0 x 3”,

TN17237

S2 steel blades made for the professional mechanic| Sandblasted tips help prevent camout effect

The GT8000 can be used in any direction without worrying about flame blow-out. | Sturdy brass flame nozzle and detachable base | Piezo crystal instant ignition | 35 minutes of high grade 2500ºF burn time BZ189-8000

Big Shot Bench Torch

20V MAX Grabo Lifter

SPECIALTY TOOLS AND BODY SHOP

WELDING AND SHOP SUPPLIES

Large 3.86” x 2.17” viewing area | Automatically changes from a light to a dark | Variable shades from DIN 9 to DIN 13 | Outside sensitivity adjustments provide clear vision both prior and during welding

4.5 x 3.5”” View with high performance filters protects | Automatically changes from a light to a dark state when arc is struck | Returns to clear when welding stops | Variable shades from DIN 9 to DIN 13

CLEANING AND WIRE BRUSHES

Radial Hex Shank Wire Brushes

BRUSHES CLEANING AND GRINDERS

Brass coated carbon steel brushes for scraping rust, paint, dirt and grime | Made of carbon steel crimped wire to prevent wires from breaking loose during aggressive use | 1/4” quick change hex shank fits most drills and die grinders

9” Bore Brush Sets with Drive Handle

9” lengths for cleaning tubes, ports, bearings and other general wire brush applications | Twisted wire construction| 1/4” hex shaft for use with any type 1/4” driver. | 10, 15, and 19mm

4 Piece 12” File Set

Custom shapes for multiple applications.| Carbon steel shaft allows for fast material removal and has a rust preventing coating.| Ergonomic handle feels very

Nylon, Solid, Cup and Radial Brushes

Nylon is less abrasive and cleans without damage to soft metals | Hex shank fits into drills and hex impact tools

Wire bristles are encapsulated in a special material to extend brush life and promote aggressive brush action. | Quickly gets down to bare metal. | Great for use in confined areas

Flared, Solid, Cup and Knot Power Tool Brushes

Use to remove paint, carbon, rust and corrosion | Cleans pitted surfaces and gasket residue | Has 1/4” shank and fits all portable drills.

Use to remove paint, rust, dirt, scale, solder and chips | Made from 30 gauge, oil tempered steel wire and secured in smooth, hard wood handle curved to give best cleaning angle. | Length 13-11/16 3 x 19 bristle rows

Polypropylene handles have been molded for easy gripping | Specially designed narrow head fits into hard to clean areas | Each brush is 3 x 7 rows and has a hang up hole in the handle.

Autobody Skinner Brush and Arbor

Steel Scratch Brush Wood Handle

Easy Grip Detail Cleaning Brushes

SANDERS AND GRINDING

1.25” (30mm) pad size for isolated spot focus sanding | Ultra compact right angle design | Adjustable speed up to 8,000rpm with full head height of 3” with pad

3” Mini Orbital Sander Kit

Low weight composite housing |Feather speed control trigger | Internal silencing system | Kit features 2” and 3” sanding pads as well as an assortments of 2” and 3” sand paper $160.00

NitroFile Abrasive Belt Tool

.5 hp 7 Degree Offset 20000 RPM Gearless Front Exhaust | Quick and easy belt and contact arm changes| Ergonomic, offset handle | Runs belts 1/4”-3/4” wide by 18” long $352.00

Designed to adjust a 3/4” x 20.5”” air belt file for cleaning, weld prep, and material removal on tubing or any radiuses work piece.| Easily adjust the roller in this tool to create slack in the belt that allows for sanding along curved surfaces. $213.00

SANDERS AND GRINDING

Delivers the fast spot weld removal with a two-speed settings | Features Forward/Reverse function, a lock-on button, and a variable speed trigger. | Tool Free 360 degree Arm Rotation

lasting German

Designed to reduce tedious hand filing and sanding | Grind, deburr, blend, polish, or finish in restricted areas | Lightweight and easily movable

Belt Tools

Right Angle Die Grinders

Thermoplastic rubber tool grip reduces cold air transmission and absorbs vibration | Smooth, efficient air motors | 3 Piece collets, safety-lock lever; rotational rear exhaust

Ideal for scaling and rust removal | Includes needle scaler attachment with 19 high tension steel needles | Comes complete with flux chisel

For surface preparation work involving the cleaning or removal of paint, rust, dirt, or weld slag | 19 needles each needle 1/8” (3.2mm). | 4,600 blows per minute at free speed. IR125-A Straight Handle Needle Scaler $282.00

SANDERS AND GRINDING ACCESSORIES

Long-lasting, economical, general purpose grinders that access tight spots so you can grind, break sharp edges, de-burr, port, and polish virtually anywhere! | .25HP motors with precision gearing | 21000 RPM

AO2185

DRILLS SAWS AND GRINDING

Reversible Air Drills Heavy Duty Air Saws

Cut Off Wheels

Reversible Air Drills

Composite blended body for reduced vibration and ergonomic control | Patented grip has been ergonomically designed to perfectly fit the hand-providing unmatched comfort for the user

Heavy Duty Reversible Air Drills

High-quality drills for all your general purpose drilling, honing, reaming, and hole-sawing

Full power in forward and reverse | Equipped with a built-in muffler for noise reduction | Planetary gear system for long life

GRINDERS AND AIR HAMMERS

GRINDERS AND ACCESSORIES

GRINDING AND BODY SHOP NEEDS

and titanium’s | Blue Zirconia are best for gasket and grime removals (25 per pack)

BODY SHOP/SPECIALTY DRILL BITS

Spiral fluted stepped tip drill bits outperform every conventional drill bit design in nearly all materials.| No Skip M2 High Speed Steel and Onyx oxide coated to prevent chipping

The split tip point with a step drill design gives accurate starting without the need of a center punch. | It reduces heat to increase the life of the drill bit

Titanium coated allows for drilling with less friction | Last up to 6 times longer than standard bits | Bulk set has multiple quantities of each size

Designed for high solid paints and clears | Lightweight and durable | Easy to clean corrosion protection | Soft trigger pull and precise, lubricated adjustment knobs for optimal control AOEUROHE102 1.2mm EuroPro High Transfer Spray Gun $121.00

as bedliners, latex, polyurethanes, gel coats, thixotropic materials etc. | 1.8 mm fluid nozzle | Includes: Spray gun cleaning kit and optional filter VP20400 High Performance Spray Gun $299.00

for drilling deep holes | TurboStep design outperforms conventional bits in every material | Oxide coated to prevent chip buildup and ensure smooth drilling | Includes sizes 1/8” to 1/2” AOTS7

Drill bits can cut accurate holes in sheet metal and plastics up to 3.4mm thick | 1/4” shank 13 Sizes from 1/8” to 1/2” and 1/32” increments, 6 Sizes from 3/16” to 1/2” and 1/16”, 9 Sizes from 1/4” to 3/4” and 1/16” AO9445

Piece

Multi-level bit tip allows for easier drilling than traditional drill bits. | Gold and black finish | Self-centering | Sizes include 1/16” – 1/2” | Packaged in Magnetic drill bit holder VMHSSC29A

7 Piece TurboStep 12” Aircraft Length Drill Bit Set

Titanium Coated Drill Bit Sets

M35 Cobalt Multi-Pilot Drill Bit Set

WELDERS AND ACCESSORIES

180 ST+ Stick TIG Welder

SPECIALTY WELDING

Dual-voltage with 120V/240V input power. | Ability to weld up to 1/2” |Intuitive controls | Features amperage control settings as low as 5 AMPs and pulse capabilities

Professional MIG Welders

Easy Weld 140 FC-i Flux-Core Wire Welder $396.00

Powerful flux-core wire welder | Infinite voltage and wire feed speed control | 120-volt input | Welds 24-gauge up to 1/4” with .030” and .035” wire. | Includes: 8’ MIG gun and accessories FY261

Stick/MIG/TIG inverter machine | Infinite voltage and wire feed speed control | Plate thickness range: Up to 1/4” | 120-volt input power | Includes: 10’ MIG gun and accessories FY271

3 in 1 Machine 120V Easy Weld $659.00

Dual-voltage stick machine, lightweight, easy to use and generator friendly | 120/230 multivoltage power | Lift start TIG only (no foot pedal operation) | TIG torch sold separately FY291

Multi-process welding features dual-voltage with 120V/240V input power. | High welding capacity of 1/2” and 220 AMPs of welding power | Weld Mig, Tig FC and Stick FY410

Mig Tig Stick Welder $1,977.00

220 AC/DC TIG Welder Package $2,416.00

Dual-voltage with 120V/240V input power. | Ability to weld up to 1/2” and 220 AMPs of welding power | Amperage control settings as low as 5 AMPs and pulse capabilities FY420

SPECIALTY WELDING AND ACCESSORIES

Offers hand-held torch wire feed steel and/or spool gun drive aluminum welding | Features “Switch-on-the Fly” toggle control between the steel MIG gun and aluminum MIG spool gun | Digitally controlled wire speed output HSW-6260

260 Amp Dual-MIG Welder $2,873.00

140 Amps of output power @ 35% duty-cycle | Manual or fully synergic MIG for gas and no-gas | Optional spool gun | Offers lift-arc DC TIG, arc electrode stick welding, and aluminum spool gun capabilities | Features inverter power supply and 7” LCD display HSW-6215 140 Amp Multi-MIG Welder $862.00

200 Amp Multi-MIG Welder

200 Amps of output power @ 35% duty-cycle | Manual or fully synergic MIG for gas and no-gas | Optional spool gun | Offers lift-arc DC TIG, arc electrode stick welding, and aluminum spool gun capabilities | Features inverter power supply and 7” LCD display HSW-6222

$1,077.00

PRO ADF Welding Mask with Hood $207.00 FY300

40 Amp Plasma Cutter with Compressor $2,019.00

40 Amps of output power @ 35% duty-cycle | Complete portability anywhere in the shop with full power, quiet operation | Features inverter power supply, infinitely adjustable output power, start-up air purge switch, and LED status lights HSW-6004C

WELDING AND BODY SHOP ACCESSORIES

Reinforce plastic repairs with staples. | Install wire mesh over cracks and weld plastic over top. | Feed plastic rods through the guide port for effortless welding.

Used for replacing door panels, removing dashboard pieces, or working with exterior trim | Apply leverage right where you need it | Contoured shape & thumb channel reduce the risk of slipping.

3/4

Performs repairs on major panel damage with a minimum of tear down, prep, clean up, and damage to the vehicle.| Allows the user to pull panels without removing paint or corrosion protection | The kit comes with wide variety of tabs, a pulling harness with 3 arms, glue gun, plastic scraper, knock down tool (4 heads), and release agent.

holes in plastic bumpers cleanly and quickly for a factory-fresh look. | Perfect OEM results with out messy grinding or shaping | Includes

Coated Hole Saw Kit

Easily cut thru the stock rather than ripping, tearing, and pushing | All cutters include arbor, pilot, and ejector spring. The arbor fits 3/8” & 1/2” drill chucks. | 7/8, 1-1/8, 1-3/8, 1-3/4, 2, & 2-1/2” Cutters, Arbor & Extra Pilot BT14006

Precision burr free hole making in sheet metal and frame materials | A must have for any tool box or fabricator. | Kits include extra pilots

ADAS Camera Lens Hole Maker Kit

BODY SHOP SPECIALTY / Welders Dent Pullers

Creates a strong, structural repairs | Uses heat to embed a staple into the plastic to “stitch” tears in plastic back together. | Restores components to original strength

method for removing dings and small dents from OEM paint. | Uses a squeeze puller - that allows for a massaging action that helps release the tension in the metal, allowing for a quicker more successful pull.

HD Metal Trim Tool

Body Shop SPECIALTY

Body Clip Mini Pliers

Quickly disconnect fuel, EVAP, DEF fittings with button-type connectors and electrical connections | Spring-loaded pivoting jaws | Double dipped PVC non-slip grip

VMV232

1/2” Automatic Rivet Nut

Setting Kit

$29.00

Metric & SAE kit can set and unthread rivet nuts up to M12 and 1/2” | Includes 10 mandrels and nosepieces | 4270 lbs. of instant air-hydraulic pulling force

AOPRN2

$652.00

78’’ Extendable Lift Gate Hood Prop Holds lift gates, hoods, or trunk lids open during repair, replacement, or body work.| Extends from 36” to 78” in height $68.00

Multi-Action Work Station and Material Handling Product

Button Clip Tool With Swivel Head

Quickly disconnect fuel, EVAP, and DEF fittings with button-type connectors | 180-degree swivel head with knurled finger rests for extra grip $29.00

VMBCT1

Body Clip Trim Removal Pliers

Easily removes plastic panel and trim clips with minimal effort and without any damage.| 2-part jaw design provides better support under the clip

Integrated power strip | Transforms into 7 different types of devices | 550lb capacity in scaffold and platform mode and 330lb in other modes | 43” x 21.75” surface and 20.5” to 30.75” height $246.00

AO55670

Adjustable Parts Paint Hanger

Adjustable frame that extends from 5’ to 8’ and hooks to hold parts for painting or drying. | Constructed with 4” PU caster wheels, 2 with brakes for stability AO7306

$169.00

Pro-Step Adjustable Work Stand

A safe way to elevate and work on higher parts of the vehicle | Foam bumpers protect vehicle finish | Spring loaded retractable wheels. | Extra-wide base 23”. Adjustable height 6 1/2” to 22 1/2”. SM20350

$238.00

Pro Folding Parts Cart

Configure a Pro Parts Cart to meet the technician’s needs eliminates the need for multiple parts carts.| Locking pin fasteners allows for custom configuration of up to three shelves/mesh baskets vertically | Unique design customizes to the technician needs and maneuvers easily within the shop while weighing 100 lbs.

SM35950

Telescopic Measuring Tram

$587.00

Measuring from 16.5” to 3’3” this tram takes point to point | Ideal for tight spaces since most other trams can’t get where this mini tram can! | Comes with pointers and a nylon carrying bag.

DNTDF-3S

3 Meter Tram Gage

$907.00

No need to set up a complicated bench measuring system or mount the car on a rack. | Extend out only as much tram as is needed. | Internal tape reads out through a display window. | Measures 2’6” to 9’2” DNTDF-3TC3A

$347.00

RIVET GUNS AND KITS

3/8” Pneumatic Rivet Nut Setting Kit

Metric & SAE includes mandrels / nose pieces for the most used sizes | Great to quickly unthread set rivet nuts by operating the free spinning rear wheel. | 2680 lbs. of instant air-hydraulic pulling force.

AOPRN1

$256.00

Metric and SAE 13”Thread Setting Hand Riveter kit

Innovative head assembly that allows for the quick changing of mandrels | Kit includes 6 interchangeable mandrel/nose pieces in Metric M5, M6, & M8 and in SAE 10-24, 1/4-20, & 5/16-18.

AO1442

$97.00

13” Plusnut and Extra-Long Rivet Nut Setter Kit

Metric & SAE is designed for setting bulbed PlusNut’s, longer than standard rivet nuts and even standard rivet nuts. | Includes 9 SAE and Metric sizes

AO1450

$117.00

leverage for quick and easy sets | All metal construction, simple design and few moving parts | Features plastic bottle rivet catcher | Sets five sizes of aluminum and steel rivets to 1/4”

Combination Rivet Nut And Pop Rivet Setter Kit

Easily transforms between pop rivet, rivet nut and nibbler functions | This kit includes attachments for blind rivet , rivet nut and right-angle sheet metal nibblers

AO1453

$98.00

TA19200

Heavy Duty Hand Rivet Kit With 40 Rivet Sets 3/32”, 1/8”, 5/32” and 3/16” steel or | aluminum rivets quickly and easily |Comes with 4 nosepieces | Includes 10 each 3/32”, 1/8”, 5/32” and 3/16” rivets $26.00

Sets most plastic rivets in one stroke without re-gripping | Long reach design accessed areas not accessible with lever type tools | Sets all sizes using a single nosepiece.

RIVET GUNS AND KITS

Cordless Rivet

Guns

Pulls rivets up to 3/16” | Reduced strain on users with single hand operations | Most Compact with quick Exchange front end | Kit Includes 2 batteries, charger and bag

Programmable and fast pops. | 1.18 stroke and can pulls up to 900 3/16” aluminum or 500 1/4” aluminum blind rivets on one charge | Kits include batteries, charger and storage

for the

Heavy Duty 13” Hand Riveter

retainers, fasteners, and clips

body panels on

Includes convenient organizer with illustrated insert for quick part reference.

One-handed operation | Self-adjusting jaws set rivets perfectly in a single stroke | Compact design | Access areas where lever type tools can’t ft| Includes 40 assorted popular plastic (POM) rivets

DWDCF403B 3/16” Rivet Tool Bare Tool

Nutsert Rivet

SPECIALTY DRILL BITS AND SETS

Molybdendum steel that has high vanadium content and are salt nitride treated giving drills the hardness to drill tough materials such as stainless steel and titanium alloy | Kits come in steel indexes or DB drill buddy containers and start at 1/16”

Stubby Length Drill Bit Sets

LIGHTING SPECIALTY

2000 Lumen Stingers

High-performance with the desired aluminum alloy body and anti-roll design | Ergonomically shaped for a sure grip | Dual power switches and an intuitive mode selector switch for ease of use | Corrosion resistant, gasket-sealed borofloat® glass lens | 7.67” long

800 Lumen HL Piggyback Stingers Lights

297 Meters of beam distance. | Hi, medium, low and strobe | Optimized electronics provide regulated intensity throughout battery charge | Length 8.85”

Multi-function On/Off push-button switch |Three variable lighting modes and strobe | Charge the Stinger LED and a spare battery simultaneously | 8.41”

Strion 2020 1200 Lumen Lights

Oil-Resistant flexible cords in low temperatures | Grounded triple tap plug includes lead-in cord. | Adjustable cord stopper ensures outlet is always within reach. | Cord locks out in 1 ft. increments. | Swivel mounting bracket | Reel can be mounted to wall or ceiling.

Retractable Cord Reels

Resistant

1350 Lumen LED Underhood Light

TrueView High Definition LEDs | Rotate, Slide, Remove, & Hang - Easily rotate & slide light bar to focus light to the up, down, left or right. | Detachable light with hang hook (battery and charger not included) $206.00

MWK2125-20

Two swivel points with 300 degrees of horizontal rotation | Strong magnetic base allow for easy

Lumen Flashlight

LIGHTING AND ELECTRICAL SUPPLY

MWK2117-21

20 Lumen Nano Light

LIGHTING AND ELECTRICAL SUPPLY

BODY SHOP SPECIALTY AND CHASSIS

Remove and Install: silent bearings, hydraulic bearings, ball bearings, rubber bearings, shaft seals, bearing brush, etc | Sleeves can be stacked | Diameter Range: 1-3/4” to 3-3/8”

Designed to be used with Impact Tool | Fast and safe Removal of Suspension and Steering Ball joints | Jaw capacity range from 30-65 mm | 3 different fork sizes 24, 27, and 31 mm MU609033

Universal Tool set for extracting and mounting: silent bearings, hydraulic bearings, ball bearings, rubber bearings, shaft seals, bearing brush, etc. | Includes: 10 sleeves, 3 spindle, 4 discs MU609390

Clip Lifter Tools

CHASSIS BEARING AND SPECIALTY TOOL KITS

kit services Rear Wheel Hubs & Bearings on European vehicles, plus Front Wheel Hubs & Bearings on US, Asian & European vehicles.| Includes all necessary Adapter Shoes, Installer Adapters, Adapter Sleeves, Support Disc, Spacers, etc.

A complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. | Specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time.

Use the impact 3/4” (19mm) socket size M12 and M14 thread bolts and 15/16” (24mm) nuts to push against the knuckle assembly and force the hub out. | Use the free hole locations existing in the hub or hammer out 1-2 wheel studs

SPECIALTY PULLERS

Master Slide Hammer Puller Set

5 lbs. Slide hammer puller, hub puller, two sizes of Grip-OMatic® jaw-type pullers, a bearing pulling attachment, plus a cross-bar gear and pulley puller | Front hub and axle pullers for servicing front-wheel-drive cars | Services up to 5 ton and can also be used with other OTC pulling accessories

$820.00

Steering Knuckle Spreader

For removal and fitting of shock absorbers without damaging the aluminum or cast iron knuckle | Tool adjusts for centered or non-centered slot CM4008

Bearing Splitters

Heavy duty treated steel construction | Knife like edges for a secure gripping surface when clearances are extremely tight | Use with puller many styles of pullers

5 Piece Bearing Splitter Set

$100.00 CM8995

Internal and external jaws provide a variety of combinations to pull bearings, gears and seals.| Two- and three-way cross blocks and cone for multi use| Grip wrench adapter and dent puller attachment for body pulls

OT4579

9 Way Slide Hammer Puller Set $194.00

Blind Hole Bearing Puller Set

For pulling jobs requiring an internal pull, such as pilot bearings.| Four collet sizes: 7/16” to 1/2”, 9/16” to 11/16”, 5/8” to 1”, 1” to 1-1/4” | Set includes a 2-1/2 pound slide hammer with T-handle. OT4581

Ideal for removing bearing cups, outer races, and oil seals from blind holes | Use with a slide hammer based on style

Push Pullers

installs

5 Lbs. Slide Hammer Unit

May be used with most internal pulling attachments or with internal or external-internal threaded adapters. | Basic slide hammer unit is 24” long and a 5/8”-18 threaded end. $97.00

Set contains 4 bearing splitters and 1 V-Belt Pulley Pulling attachment tool. | Use to remove bearings, races, and seals from axles, wheel hubs.. without damaging the bearing or other components | All sizes combined handle 1/4” -5-7/8”. $450.00 OT1155

5 Lbs. Slide Hammer Dent Puller

Use for body or mechanical pulling | Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. | Nose cone and shaft threads are 5/8”-18. $86.00

TA81200

Slide Hammer Dent Pullers

Broached hex in nose cone locks pulling screw in place for body pulls | Nose cone and shaft are 1/2”-20.

SPECIALTY PULLERS

10 Ton Push Puller

Heavy-duty push/puller designed for removing press-fit part such as gears, bearing and other items. | Meant to be used in conjunction with bearing pullers and other attachments $111.00

7 Ton Multi Purpose Bearing and Pulley Puller Kit

Wide Spread Crossbar with 3 pin-hole; 7-1/4 to 9” | 2 pair of long reach jaws 5.5” and 9.5”| 2 long reach forcing screws (live center) for pushes of 4.5” to 10.5”

Small Standard and Reverse Jaw Bearing Pullers

Multipurpose Bearing & Pulley Puller Set

Use For a wide range of pulling jobs, including: bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, and more | Interchangeable with many OTC puller products for exceptional coverage

Includes two popular bearing “splitter” (2” and 3 “), four sets of hex push-puller legs and a bar-type puller head with a 9/16” forcing screw. 5” puller cross-bar with a 6-1/4” forcing screw.

OT4518 5-Ton Bar Type Puller-Bearing Separator Set

Griplock Pullers

Pressure bearing yoke cap holds jaws in place for ease of set up - in any orientation. | 2 or 3 Jaw application. | Live Center action forcing screw. | Professional finished for long lasting durability

Eight pullers, five attachments, and extra puller jaws. | Pull gears, bearings, pulleys, wheels, and more on cars and light trucks. Tools are contained in a rugged, lockable metal storage cabinet

Works on a wide array of truck, bus, and tractor engines | Handle wet and dry sleeves - and you won’t

STRUT/CHASSIS AND SPECIALTY PULLERS

Tackles the job easy | Meets ASME PASE safety standards | Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before | Armlocking rings eliminate the need for tools to adjust

Easily compress many of the strut assemblies found on passenger vehicles, light trucks and SUV’s. | Max spring compression capacity of 2,200 lbs. | Min/Max spring diameters of 3”/9” CV91300

Works on virtually all MacPherson Struts | Features a one piece cold headed bolt made of chromium molybdenum alloy steel | Use with impacts or hand tools ON or OFF the car TA63000

Remove, install and compress coil springs that can be reached through the center of the coil | 12” Tool fits inside spring then use with a hand operated ratchet wrench to pull arms closer together.

Fits a wide range of struts and requires no special adapter shoe | Safety locking pins hold the compressor jaws in place.| Using an Impact it compresses springs of 4” to 9” O.D., with wire diameters of 7/16” to 11/16”. OT6494

Used to remove class 1 & 2 vehicle yokes on drive shafts and transmissions without any damage | Reduces the risk of damages to the yokes on the automotives | Used on Ford F-150/F-350, Chevrolet 1500/3500, Dodge RAM 1500/3500 $63.00

HEAVY DUTY PULLERS AND CHASSIS TOOLS

Extra-large C-frame uses stainless steel ball bearings to securely hold cups and adapters | Easier to setup to remove and install ball joints, U-joints, wheel studs and more. The Professional Kit handles more than 600 vehicle applications

Ball

Joint Service

Ball Joint Service Kits

Removes and replace ball joints and universal joints | Works

U-Joint Pullers

Eliminates dangerous vice and socket or hammering methods | Reduces risk of damage to the driveshaft, yokes, joints or bearing cups.

U-Joint Pullers

HEAVY DUTY SUSPENSION TOOLS

Replace torch-and-hammer methods for getting the job done quickly | Five special collars and two pins allow this unit to work on both straight and tapered kingpins sizes from 7/8” to 2” in diameter and up to 11-1/4” long.

Displays digital readouts for evap & high pressure testing | Mobile repairs are now possible with the built-in air pump | Complete with all the adapters for evap low pressure testing and universal high pressure testing capabilities $1,361.00

Pinpoint faults in naturally aspirated engines and also pinpoint high pressure turbo, diesel, supercharged, boost leaks with 100% reliability. | Variable pressure up to 20 times the PSI and 40 times the flow of traditional smoke machines RL95-0135

$2,311.00

Leak Detector

55900 meets and exceeds J2791 (R134a), J2913 (R1234yf) and EN 14624 with a low power metal oxide gas sensor | 89661-AYF is dual for R134A and YF with recalibrateable gauges and 3-60” hoses ML55900-COMBOKIT

State of the art features & micro-processing technology delivers an accurate & instantaneous response | 3 Levels of Sensitivity | 5 Levels of

R134a and R1234yf Evacuation and Charging Combo Kit

Spark-Free 6 CFM deep vacuum pump for all refrigerants | Dual brass R134a and R1234yf manifold gauge set and couplers | Dual oil/dye injector and infrared thermometer ML90066-SFKIT

R134a/R1234yf

Easily convert any R134a manifold gauge set to a R1234yf manifold gauge set. | Kit Includes fittings and couplers for hose conversions ML83736-K

UV LEAK TESTING

AC ExtenDye is an enhanced additive that increases system longevity while adding dye for leak check. Works with R134 and YF | Oils are used to lubricate the AC system to effortlessly move the refrigerant

resistant foil pouch to protect against contamination. Simple pour, easy to use | 5 Ounce packs

High-output, USB rechargeable, commercialgrade aluminum body penlight | Ideal for air conditioning (A/C) leak detection | Compatible with all fluorescent dyes | ZOOM Focusable between spot and flood beams

Professional injection system | One cartridge per vehicle | Services 6 vehicles | Includes: Spotgun Jr. injection gun with R-1234yf adapter, A/C ExtenDye Cartridges (6 x 1/4 oz/7.5mL), Service stickers | Hybrid safe UV330500YF

AC DIAGNOSTIC AND REPAIR

Programmable operations Automatic Machines recover, recycle, evacuates, leak-tests and recharges with improved efficiency | Meets SAE J2927 requirement for integrated refrigerant identifier

Simple operation with superior accuracy. It recovers, recycles, evacuates and recharges quickly and accurately. | Outperforms the most current SAE J-2788 standards for accuracy and efficiency

RA34288NI

torque design for easy startup and efficient operation

R134A AC Machines

Fully Automatic - recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately. | SAE J2788 compliant | Automatic Refrigerant Refill feature

Heavy-Duty R134A Refrigerant RRR Machine

Recovers, recycles, evacuates, leak-tests and recharges R-134a | Large capacity, removable tank and liquid pump for larger A/C systems, typically found in busses | Nitrogen port to dry and leak test A/C systems

RA34888HD

Recover, recycle, evacuate and recharge multiple refrigerants, all in one fast and continuous operation through one hook-up | Ideal for buses, refrigerated trailers R-12, R-134a, R-22, R-404A, R-407C and many others RA17800C

RA15800 8 CFM Vacuum

Ergonomic handle grip with closed handle for balance and portability | Inlet fitting allows maximum airflow while preventing oil backflow | 1 HP thermally protected motor | Nonskid pads for less movement

with most commonly used refrigerants | Equipped with a stable sensor that will last up to 10 years | All have audible

Handy for adding dyes to AC for leak detection | Just fill the barrel with the amount of oil needed and connect the injector fitting to the low side access port

Cool Tech R134A AC RRR Machine

AC DIAGNOSTIC AND REPAIR

5 CFM Vacuum

Delivers up to 90 minutes of runtime per charge. | Ball valve isolates the pump for easy battery changes | Gas ballast valve reduces oil changes | Up to 60 min runtime in Default Mode | Low battery light notifies audibly and visually of low battery $1,008.00

syringe-type injectors to add dye/lubricant oils to a

ML53123-YF YF Oil and Dye Injector

Wirelessly gather and transmit vehicle information to your Robinair machine | The data is used to find the correct refrigerant charge amount and more RAACS-250

Read and track temperature from multiple vehicle locations from your AC machine | Compare internal cabin vent temperatures across multiple vents

Connects to special Enviro-Guard hoses to allow access to service ports | Quick-connect design has integral safety sleeves

AC DIAGNOSTIC AND REPAIR

CONTACT DISTRIBUTOR FOR PRICE

Effortless navigation through detailed function screens with the 10” color touchscreen command center. | Recover 98.5% of the refrigerant in a vehicle which exceeds the SAE standards for purity and is the fastest in the industry.

R1234YF Hybrid AC900

FCBDE-400-134 R134A RRR AC400

AC DIAGNOSTIC AND REPAIR

MAXXAIR AC Service Centers

Compatible with both electric and enginedriven compressors | 7” Color touch-screen control panel | Wireless Printing for seamless record-keeping | Motor controlled ball valves opens wider for greater flow resistant to clogging of debris or sealants | Vehicle database to quickly determine the vehicle’s service needs.

CCMXHD R134A Heavy Duty RRR

CCMSX134 R-134A RRR

CCMSX134-H R134A Hybrid RRR

CCMSX1234 R-1234YF RRR

CCMSX3030 Dual RRR AC Service Center

Distributor for Price

CCAR2700M Multi-Refrigerant Recover/Recycle/ Recharge System

Supports multiple refrigerants - R-134a, R-12, R-22, R-502, R-404a, R-402a, R-401a, R-407C and R-409a. | Semiautomatic | Pump-down valve to allow the user to pump down the machine and switch tanks and filters for multirefrigerant use.

Contact Distributor for Price

R134a Mobile Monster Recovery Station

Equipped for in the field recovery | Extra-large 10” pneumatic off-road tires | 4-way aluminum manifold | 240lbs. capacity electronic charging scale and 6 CFM, 2 stage vacuum pump

ML91788

$2,526.00

Features a high-intensity bar graph display | User-selectable 10 sensitivity ranges | Detect a leak rate of better than 0.25 oz/yr (7g/yr) of HFC | Patented Ion-Pump sensor technology detects all refrigerant types CCLS790B

R-1234yf service coupler set | Integrated safety sleeve, protects against refrigerant loss | Compact design | Provides a stable grip on the fitting RA18124

Contact

AC DIAGNOSTIC AND REPAIR

Tracer Gas Leak Detector Service Kit

Use tracer gas in place of refrigerant to find AC system leaks | Includes a hydrogen gas leak detector with sensor technology | Full color liquid crystal display (LCD) and sweep mode function convey messages, graphics, and prompts $969.00

Capable of connecting to any SAE J2843 or J3030 AC service machine that has an external USB port | A large, easy to read color display shows results quickly

CONTACT DISTRIBUTOR FOR PRICE

Used to test systems for leaks when they do not contain refrigerant. | 1/4” SAE flare outlet port, with control valve, to keep pressure on the regulator at all times | T-Handle for ease of pressure adjustment FJ2713 Nitrogen Pressure Tester $170.00

High-pressure flush system for automotive condensers, evaporators and hoses | Remove soot, contaminants and sludge | Includes nitrogen regulator, nozzle and 96” hose FJ2711 Nitrogen Flush Kit $131.00

Use to remove contaminants, moisture, and acid from most AC systems | 18oz. capacity designed for use with flush solvents FJ2710 AC Pressurized Flush Can

Use to remove contaminants, moisture, and acid from most AC systems | Designed for use with flush solvents

Remove solids and residue | Flush connections with conical tip for automotive applications. | External shop air or nitrogen bottle connection.

ML99935 R134a & R1234yf Smart Manifold Gauge Set

IntellaSense II Refrigerant Leak Detector

Detects all refrigerants | Flexible 15.5” probe for hard to reach areas | Sensitivity button for High, Medium and Low | Intelligent tip eliminates the potential of false alarms | Powerful microprocessor ensures optimum performance of the sensor $271.00$271.00

UV Leak Detection Kit

Meets the new SAE J2297 standard for use with both R134A and R1234YF | One squeeze injects a premeasured amount (1/8 oz.) of dye. | OEM backed and approved | Kit includes: Injection gun, fluorescent light, fluorescent leak detection dye, fluorescent dye cleaner, and UV glasses $328.00

RA16235

ML55600-A Infra Red Black Series Leak Detector

Detects the refrigerant gas by scanning the area in a slow target scan mode | Alarm mode: visual and audio | Automatic shutdown: 10 minutes without operation $491.00

Heavy Duty Sealing Washer O’Ring Assortment

AC DIAGNOSTIC AND REPAIR

65 total pieces resistant to aggressive chemicals and abrasion | Enhanced stability with exposure to heat and oxidation | More

Aluminum manifold with pressure gauges, high and low side service port couplers and 72” hoses packed in a protective plastic case. | Anti-flutter high and low side gauges FJ6850

R1234YF Manifold Gage Kit $173.00

Easily switch between AC systems | Use with R134A or R1234YF refrigerants | 72” Hoses, manual Couplers | Plastic Carrying Case for easy winter storage FJ6855 Dual R134/1234YF Manifold Set

Cools down as deep and fast a Vacuum as a two stage pump | Two stage performance using twin-port technology | 3/4 horse, 1725 RPM | Lightning fast FJ6916 7 CFM Vacuum Pump Single Stage

Spark free pumps are now required when using many refrigerants. | Suitable for YF and R134A and can be used with other refrigerants using optional tee adaptors | Dual ports FJ6930 5 CFM Spark Free Vacuum Pump

Hand-held Hydraulic Crimper Kit for AC Hoses | Lightweight and portable | Efficient tool to crimp pipes, barrier hoses and beadlock fittings | Quick-snap dies require no pins or screws | Includes complete set of dies #6, #8, #10, #12

FJ5109

AC DIAGNOSTIC AND REPAIR

Electric Pumps feature two stage performance using twin-port technology | Lightning fast design removes moisture and noncondensable gases that can destroy any AC or refrigeration systems

Aluminum Manifold Sets

Aluminum manifold with front easyto-operate color-coded handles | Side hose hangers | Anti-flutter high and low side gauges with recalibration adjustment

gauges | Extra access port for vacuum line | R1234yf high and low side quick couplers meets SAE J639 & J2888 | R134a high and low side economy couplers $150.00

Pressure Testing Regulator Kit

Mastercool’s new nitrogen regulator is specifically designed to meet the specifications of HVAC/R and automotive A/C systems. This single stage nitrogen regulator is used to test systems for leaks

AC DIAGNOSTIC AND REPAIR

Repair a damaged AC line or install an in-line filter in as little as 5 minutes | Fits 5/16”, 3/8”, and 1/2” lines | Avoids difficult work removing and installing lines

SRRAC128

Repair damaged aluminum lines including pinholes, cracks, and more | On-the-car repairs made simple |Block off kit seals rear where repairs are not accessible

Ratcheting action provides maximum leverage for making secure high-pressure connections | Numerous applications including fuel lines, A/C lines, transmission lines and CV axle boots | Use with 1/4” to 1” clamp sizes | More effective than conventional clamp pliers SRRCP90 Ratcheting Hose Clamp Plier

AC System Oils

universal, Estercool oils aid in system lubrications | Dye infused oils aid in locating small leaks

AC DIAGNOSTIC AND REPAIR

AC Repair 159 - 170

Air Couplers 79

Air Hammers 134-135

Air Hose 79 - 80

Air Accessories 64, 78 - 80

Air Tools 78 - 82

ATF 29, 32, 36

Back Probes 20, 60, 126

Battery Chargers 9, 21 - 26

Battery Test 13-16, 13,21-26,64

Bead Blasters 70

Bearing Kits 152 - 153

Belt Sanders 130 - 132

Bench Grinders 135

Bit Sets 118 - 122

Blow Guns 77-79

Blowers 8, 10 ,91, 165

Body Shop 125 - 145

Bolt Cutters 111

Booster 21 - 25

Boots 66

Bore Gages 45

Borescopes 19, 115

Brake Repair 27-36,45

Brushes 28, 77 - 79

Buffers 8, 11

Burrs 127, 132

Bushing Kits 152, 158

Camshaft 51 - 53, 56, 83

Chain Wrenches 97

Chassis 151, 157

Circuit Testers 18 - 20, 60

Cleaning 76-78

Clip Tools 142 - 143, 151

Compression Test 50

Coolant Service 37 - 41

Cordless 4-10,77,81

Crankshaft 51 - 56,83

Creepers 60 - 61, 65

Crimpers 19, 26, 108, 109, 126, 164, 167

Cut Off Tools 5, 7,131-135

Cylinder Tools 45 - 49, 60

Dent Pullers 126 - 127, 141 - 142, 154

Diagnostic 12-19,23,24,58

Die Grinders 5, 131 - 132

Diesel 41, 50, 58

Disconnects 48, 51

Door Tools 142, 143

Drill Bits 137, 146

Drills 5-7, 133

Electrical 12-20 ,117,126

Engine 42-60, 83, 86, 87

EV Tools 97,125

Evacuators 29, 32 - 34

Exhaust Tools 87

Extension Cords 148

Extractors 28, 110 - 113, 119

Fans 8, 10, 91, 165

Feeler Gages 55

Fender Covers 65

Filter Wrenches 83 - 85

Flaring Tools 27, 164

Flashlights 147 - 150

Fuel Injection 27, 58

Fuel Line 43, 47, 48,58

Funnels 33, 46, 51, 84, 86

Fuse Testers 19, 20, 28

Garden 8, 10, 77

Gloves 66, 67

Glow Plug 49

Grease Guns 30-32

Grinding 11,126-136

Hammers 64 ,69, 121, 126, 127

HD Suspension 158

Heat Extractors 28

Heat Guns 9

Helmets 127

Hex Sets 100, 101, 118-119, 120, 122

Hole Saws 141

Hose Clamp 39, 54, 60

Hose Clamp Pliers 37, 38, 169

Hoses 79 - 80

Hub Tools 59, 69, 152 - 153

Hydraulic Pumps 158

Hydrometers 39

Impact Drivers 6, 113

Impact Sets 94 - 107, 120 - 123

Impact Wrenches 4 - 9, 80 - 82

Inflator Gages 62 - 66

Injection Tools 44 - 55

Jacks 71-75

Key/Lockout 13, 59

Landscape OPE 5, 10

Leak Testers 39 - 40, 162 - 170

Lifting 71-75

Lighting 147 - 150

Line Tools 37

Lock Out 59

Locking Pliers 108 - 110

Lug Nuts 66, 68

Magnets 92, 114 - 116

Manifold Sets 165 - 170

Marking Tools 49,116

Measuring 35,45-47,52-65,124,143

Mirrors 114 - 115

Multimeters 16-17

Nut Setter Tools

Parts Kits

Pinch Off Tools 35, 37 Pliers

Portacool Apex Cooling Fans

Complete digital display with Wi-Fi capability | Oscillating louvers for customized airflow | Digital water level indicators and alerts and automatic shut-off | Large water reservoirs. | Quiet performance for better indoor sound management | Larger models may ship direct from the factory Shop