Page 1

Buckingham Manufacturing Company, Inc. General Catalog

05/12


Buckingham Buckingham and Safety Standards

OSHA

The Occupational Safety and Health Administration (OSHA) has spelled out certain requirements for equipment used in the construction (including power line construction) and telecommunications industries. These standards are under Title 29, CFR Chapter XVII, Parts 1910 and 1926 as detailed below. • Part 1910.67 (c) (2) (V) apply specifically to extensible and articulation boom platforms — belting requirements. • Part 1910.268 (g) (2) and (g) (3) applies specifically to telecommunications and personal climbing equipment for use in that industry. • 1910.269 applies to electric power generation, transmission and distribution, electrical protection equipment. • Part 1926.104 (e) and (f ) applies to safety belts, lifelines and lanyards used primarily in the construction industry. • Part 1926.453 (b) (2) (v) apply specifically to aerial lift - belting requirements. • Part 1926.502 fall protection system criteria and practices • Part 1926.951b, Tool and Protective Equipment, deal with the care and use of personal climbing equipment. Other requirements and/or standards may be issued. • Part 1926.959 applies specifically to linemens’ body belts, pole straps and lanyards. (Other than in telecommunications covered in 1910.268).

ANSI Z359 The American National Standards Institute (ANSI) in Z359 establishes requirements for the performance, design, marking, qualification, instruction, training, use, maintenance and removal from service of connectors, full body harnesses, lanyards, energy absorbers, anchorage connectors, fall arresters, vertical lifelines, and self-retracting lanyards comprising personal fall arrest systems. The ANSI Z359 Fall Protection Code currently includes nine standards: • Z359.0-2009 “Definitions and Nomenclature Used for Fall Protection and Fall Arrest” • Z359.1-2007 “Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components" • Z359.2-2007 “Minimum Requirements for a Comprehensive Managed Fall Protection Program" • Z359.3-2007 “Safety Requirements for Positioning and Travel Restraint Systems” • Z359.4-2007 “Safety Requirements for Assisted-Rescue and Self-Rescue Systems, Subsystems and Components” • Z359.6-2009 “Specification and Design Requirements for Active Fall Protection Systems” • Z359.12-2009 “Connecting Components for Personal Fall Arrest Systems” • Z359.13-2009 “Personal Energy Absorbers and Energy Absorbing Lanyards”

ASTM

CSA

The American Society for Testing and Materials (ASTM) has revised the Edison Electrical Institute (EEI) “Specifications for Linemen’s Climbing Equipment” AP-2 1973. The new standard is ASTM F887, “Standard Specifications for Personal Climbing Equipment.”

CSA International is a provider of third party product testing and certification services for compliance to national and international standards. The CSA Certification mark, generally required by the Canadian market, indicates that a product has been evaluated by their process (examination, testing and follow-up inspection) and complies to the requirements of the applicable standard for which the product is labeled. • CSA-Z259.1- 05 - Body belts and saddles for work positioning and travel restraint • CSA-Z259.2.2-98 (Reaffirmed 2004) - Self retracting devices for personal fall-arrest system • CSA-Z259.10-06 - Full Body Harness • CSA-Z259.11-05 - Energy Absorbers and Lanyards • CSA-Z259.12-01 - Connecting Components For (PFAS) • CSA-Z259.14-01 - Fall Restrict Equipment For Wood Pole Climbing.

Our Guarantee

We guarantee the equipment we manufacture to be free from defects in material and workmanship. We will repair or replace any equipment defective which is returned to us. This express guarantee supersedes all other expressed or implied guarantees, obligations or liabilities. If you have questions about a product or its intended use, please contact us between 8:00 a.m. and 5:00 p.m., Eastern Time, Monday through Friday, at (607) 773-2400.

i


Buckingham Manufacturing Buckingham Manufacturing Company has proudly served industries with workers who climb wood poles, trees, towers and structures that support electricity and telecommunications equipment for well over 100 years. Whether for work above or below ground in these industries, we produce safety equipment and specialty tools for work positioning, retrieval, fall restraint, fall restriction, fall arrest and suspension work applications. Most people do not think about the importance of work performed by linemen every day until the power goes out, the telephone/computer stops working or a tree falls on a house or power line. Our customers maintain and restore services in all types of weather. This catalog is a tribute to these highly trained workers performing dangerous jobs with little recognition!

Buck Tough

Knowing the dangers of these industries, we make our products Buck Tough. They are designed for rough use and no product is made without thorough testing and inspection. This includes the raw materials, in-process manufacturing and the finished product.

Buck Tested When multiple standards can be applied to a product, Buckingham uses the toughest standard for compliance. And to make sure we are up to date on standards we are members of ANSI, ASTM and CSA. Buckingham is committed to develop new products for our customers that are top quality and safe. We will continue to listen to our customers to improve existing products and develop new. Our products will be produced with the utmost attention to quality and safety providing our customers assurance of being Buck Tough and Buck Tested.

Product Application To help you use this catalog, most products are accompanied by a symbol that indicates whether the product is intended for fall arrest, work positioning, suspension, retrieval, or fall restraint. Suspension System:

Fall Arrest System:

Equipment designed to suspend or lower a person to a work site. Not intended to arrest a fall.

A product specifically designed to arrest a fall from an elevated position.

Work Positioning System & Wood Pole Fall Restriction Device

Retrieval System:

Fall Restraint System:

Equipment used to evacuate a person from an area in an upright position. Not intended to arrest a fall unless also equipped for fall arrest.

Equipment designed & used to prevent the worker from reaching an area where a free fall could occur.

Membership in Professional Trade Associations & Community Involvement • • • • •

American Society for Testing and Materials (ASTM) American Society of Safety Engineers (ASSE) Greater Binghamton Chamber of Commerce International Safety Equipment Association (ISEA) International Society of Arborculture (ISA) Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

• • • • •

ii

National Association of Manufacturers (NAM) National Association of Tower Erectors (NATE) Northeast Public Power Association Tree Care Industry Association (TCIA) United Way


Table of contents Safety Standards............................................................................................................................................................................................... i Your Partner in Safety..................................................................................................................................................................................... ii

New Products

1

Climbers 9 Climber Information & Options.............................................................................................................................................. 10 Pole Climbers................................................................................................................................................................................ 12 Tree Climbers................................................................................................................................................................................ 14 Replaceable Gaffs ....................................................................................................................................................................... 15 Climber Guide.............................................................................................................................................................................. 16

Climber Accessories

19

Body Belts

27

Pouches & Holsters

41

Positioning Straps & Rescue Products

47

Knives & Tools

53

Guards & Scabbards

59

Climber Pads................................................................................................................................................................................. 20 Climber Straps.............................................................................................................................................................................. 24 Climber Accessories................................................................................................................................................................... 25 New Body Belts............................................................................................................................................................................ 28 Sizing Information...................................................................................................................................................................... 29 Full Float Body Belts................................................................................................................................................................... 31 Semi Float Body Belts................................................................................................................................................................ 36 Body Belt Accessories................................................................................................................................................................ 37 Body Belt Safety........................................................................................................................................................................... 39 Pouches & Holsters..................................................................................................................................................................... 42 Miscellaneous Holsters.............................................................................................................................................................. 43 Leather Nut & Bolt Bags............................................................................................................................................................ 45 Carry Belts...................................................................................................................................................................................... 45 BuckSqueeze Wood Pole Fall Restraint............................................................................................................................... 48 SuperSqueeze Wood Pole Fall Restraint............................................................................................................................. 49 Wood Pole Fall Restraint Accessories................................................................................................................................... 50 Conventional Positioning Straps........................................................................................................................................... 51 Positioning Strap Safety............................................................................................................................................................ 52

Knives.............................................................................................................................................................................................. 54 Thread Restorers.......................................................................................................................................................................... 55 Scissors & Accessories................................................................................................................................................................ 55 Staple Sticks & Pullers................................................................................................................................................................ 56 Staple Puller.................................................................................................................................................................................. 56 Strand & Wire Dispenser........................................................................................................................................................... 56 Goat Wrench................................................................................................................................................................................. 57 Wheel Chocks............................................................................................................................................................................... 57 Manhole Cover Hook................................................................................................................................................................. 57 Ground Rod Driver...................................................................................................................................................................... 57

iii

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Canvas & Fiberglass

63

Fall Protection

87

Canvas Options............................................................................................................................................................................ 64 Aerial Accessories........................................................................................................................................................................ 65 Nut & Bolt Bags............................................................................................................................................................................ 68 Tool Bags........................................................................................................................................................................................ 70 Utility Bags..................................................................................................................................................................................... 72 Nose Bags....................................................................................................................................................................................... 73 Buckets............................................................................................................................................................................................ 75 Glove Bags..................................................................................................................................................................................... 77 Sleeve Rollups.............................................................................................................................................................................. 78 Specialty Canvas Items.............................................................................................................................................................. 79 Mesh Bags...................................................................................................................................................................................... 81 Hydraulic Tool & Battery Storage Bags................................................................................................................................ 82 Fiberglass Accessories............................................................................................................................................................... 83 Harnesses....................................................................................................................................................................................... 88 Ergovation Harnesses................................................................................................................................................................ 93 Harness Matrix.............................................................................................................................................................................. 94 Dual, Specialty and Tie Back Shock Absorbing Lanyards.............................................................................................. 97 Rope and Cable Grabs............................................................................................................................................................... 99 Lanyard Matrix............................................................................................................................................................................101 Retractable Lanyards...............................................................................................................................................................101 Personal Fall Limiters ..............................................................................................................................................................103 Rope & Cable Grabs..................................................................................................................................................................104 Vertical Life Lines and Anchor Slings ................................................................................................................................104 Retractable Lifeline ..................................................................................................................................................................105 Bosun's Chair...............................................................................................................................................................................105 Rigging Blocks............................................................................................................................................................................105 Apprentice Fall Protection.....................................................................................................................................................106 Rescue Systems..........................................................................................................................................................................107 Buck-It Restraint System.........................................................................................................................................................111 Confined Space Retrieval.......................................................................................................................................................112 Non-Entry Manhole Rescue...................................................................................................................................................114 Ladder Fall Protection..............................................................................................................................................................115

Tower 117 "ABC's" of Fall Protection........................................................................................................................................................118 Dual Lanyard System...............................................................................................................................................................119 Buck Hook System....................................................................................................................................................................120 Step-SafeTM System...................................................................................................................................................................121 Anchorage...................................................................................................................................................................................122 Harness & Body Belt Combinations....................................................................................................................................123 Connecting Devices.................................................................................................................................................................126 Personal Fall Limiters...............................................................................................................................................................127 Rescue Systems..........................................................................................................................................................................128 Horizontal Lifeline.....................................................................................................................................................................130 RopePro Deluxe Bags......................................................................................................................................................................

Promotional Products

131

Index 135

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

iv


Buckingham is pleased to introduce their newest products including the NEW SuperSqueeze which offers superb Wood Pole Fall Restriction and the Easiest, One Hand Adjustment on the market.


New Products

New Products SuperSqueeze The SuperSqueeze offers superb Wood Pole Fall Restriction and offers the easiest adjustment on the market. With Buckingham's patent pending WebGrab the SuperSqueeze can be adjusted with just a flick of the wrist. The SuperSqueeze can be configured to fit many climbing styles and needs, and it's modular design makes it easy to change out worn or damaged components or straps in the field.

Featuring the Patent Pending WebGrab for the Easiest Adjustment for the Circumference of the Pole

Model 488RQ4 for Distribution Model 488RTQ4 for Transmission

Model 488W2Q3 for Distribution Model 488TW2Q3 for Transmission

Available with Carabiners Model 488W2 for Distribution Model 488TW2 for Transmission

Available with Carabiners Model 488R for Distribution Model 488RT for Transmission

2011 BuckSqueeze

Buckingham has yet again enhanced the BuckSqueeze by adding their WebGrab to the green strap for even easier adjustment. In production since 2000 the BuckSqueeze is the most widely used Wood Pole Fall Restriction Device in the U.S. With thousands in use and numerous documented saves, the BuckSqueeze provides Wood Pole Fall Protection during ascent and descent. 2011 BuckSqueeze with WebGrab Model 482D - For distribution poles Model 482T - For transmission poles

SuperStrap Buckingham's SuperStraps have the same, easy to use adjustment as the popular BuckAdjuster. Model 48129W2Y Web SuperStrap • Features the patent pending WebGrab for easy adjustment. • Has all the benefits of web combined with the easy adjustment of rope. • Designed to use climbing over obstruction

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Model 33709E - Neoprene SuperStrap • Features the patent pending WebGrab for easy adjustment. • No more holes to find or run out of as with conventional positioning straps • Made from 6 ply neoprene nylon with red warning core. • Available in any length with 2 snaps. • Order Model 337099E for a SuperStrap with linkless snap on WebGrab

2


New Products Over the years, Linemen have had to adapt to the equipment they used causing stress and strain on their bodies. Buckingham teamed up with Ergonomic Specialist to design a line of products specifically for Linemen and Arborist that fit human skeletal structure and make work more comfortable, safe and productive. The new Ergovation line from Buckingham makes hard work comfortable. Model 4200 - ErgoBelt Features: D. A. Abdominal Stabilizer System - Elastic A. B. Abdominal Stabilizer belt maintains E. continual pressure and proper position of Lumbar Pad . F. B. Dee Ring Distributing Pads - Distributes C. pressure from the heel of dee by disbursing pressure over a greater area. C. Equalization Strap - When in work position transfers users weight from back support to seat section or seat section to back support. D. Lumbar Pocket - Removable lumbar pad for ideal back support. E. Harness Attachment Buckles - Attach harness to belt with man rated straps. Add option '4C to the harness model number F. Removable Seat - Connects to upper belt using steel interlocking T buckles, BuckSqueeze can connect to the lower D rings for increased comfort, provides hip support for ultimate comfort and support, and seat D rings are adjustable for ideal placement and comfort of the individual while climbing.

LineBacker

Model 4201 - Deluxe LineBacker

The New LineBackers offer ergonomic advantages and turns a two dee belt into a four dee belt. Linebackers feature an abdominal stabilizer, dee ring distributing pads, and lumbar support (removable in Model 4201, permanent in Model 4202). The deluxe Model 4201 also feature harness attachment buckles to attach to a harness (to order attachable harness, add option '4C' to harness model number).

Model 4202 - LineBacker

Man Rated Gut Strap Model 6263 is able to be used with any two dee body belt and is completely adjustable for users comfort. Belt features 5000lb man rated connections, leather lined strap, and standard tongue buckle.

Model 6264 is able to be used with any two dee body belt and is completely adjustable for users comfort. Belt features 5000lb man rated connections, leather lined strap, and easy to use quick connect buckles.

3

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

New Products

Buck ErgoBelt


New Products

New Products Buck-It Restraint System Model 125R - Buck-It Restraint System Buckingham has developed a bucket restraint system to address the concern of the OSHA compliance officers allowing a person outfitted with a full body harness and 6 foot lanyard to fall from the basket and hit an object below. System Concept: • A 10,000 lb. rated nylon strap attached, with a ratchet buckle and cotter pin that places the anchor point at the basket. • The strap has an 8" float with a 6" lanyard that attaches to the harness seat or waist belt to keep user from being catapulted. • This system allows users the mobility to do the work and avert the chance of falling. In addition, a shock absorber is attached to the Buck-it Restraint strap and the anchor point on the boom. This unique feature will keep the operator, the basket and the boom from hitting the ground in the event of a catastrophic separation of the bucket from the boom. Should the webbing around the basket be severed, the attachment back to the anchor is independent of the webbing around the basket. Basket Restraint Deceleration Lanyard

Extension Strap

Buck-it Restraint System attached to Harness

Ratchet Jacket

Ratcheting Basket Strap

Wear Guard Waist Belt / Harness Floating Restraint Strap

Cotter Pin to prevent from coming loose

Accessories Model 125R2 - Mounting Bracket For Buckets with controls on the outside, the Buck-It Fiberglass Bracket keeps webbing against the basket to prevent user getting tangled in webbing while using the controls. Before without Bracket

Model 125R1 - Retro Harness Strap The Retro Harness Strap adds onto a harness to connect the Buck-It Restraint System

After with Bracket

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

4


Model 301SR - Self Rescue System This New Self Rescue System features a new lightweight, compact design. The lightweight descender is manufactured from aircraft grade aluminum and features an anti panic release brake which will stop the descender if the user releases or compresses the descender all the way. The TVAC descent line measures 6.8mm and is compact and stands up to heat on long descents. System is packed in a weather resistant nylon bag with a mesh bottom to let moisture escape. Rated to 300 lbs. Model 301SR-50 for 50' Model 301SR-75 for 75 Model 301SR-100 for 100' Custom lengths available upon request.

Co

mp

ac

t!

Tower Rescue Blocks Model 3816 - Tower Rescue Blocks Designed specifically for the wireless telecommunication industry, this kit is designed to easily lift a victim on a tower or structure to disconnect their shock absorbing lanyard. A 4 to 1 mechanical advantage eases the process. Includes an anchor sling and micro grab to anchor to a life line. Packed in a compact storage bag that can be easily attached to a harness or belt. 10' lifting height.

Ballistic Tool Pouch

Camo Tool Bag Model 41333C7R5W3 Camouflage Canvas Bag with Rubber bottom • 6" diameter heavy duty rubber wheels • Ideal for transporting equipment in rough terrain

Model 949C • Made from ballistic Nylon • 15 pockets • 2" Tunnel to pass belt through (Tools not Included)

• Push button handle retracts when not in use

5

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

New Products

Self Rescue System

New Products


New Products

New Products

Haul Bags

4370B14 - Gear Bucket Haul Bag The Buck Gear Bucket is constructed of 44oz. Vinyl with 4300 cubic inches of internal storage and is built to withstand the most abusive environments and treatment. Features include: • Measures 13"Dia x 27"H • An ergonomic back pad that easily removes for travel or storage • Climbing spec webbing used to reinforce all seams and wear points • Metal buckles and snaps, that will far outlast plastic components • 2 large grommets on underside used for drain holes, or to run rope out of bottom • MOLLE webbing on exterior and interior of bag for organizing and racking gear • Fits 200' of rope

4371B14 - Rope Pail Haul Bag The Rope Pail constructed of 44oz. Vinyl was designed for the Arborist, Tower Worker, or Rope Access Technician, who has to haul their rope around and needs to pack it quick and convenient while keeping pace on the vertical job site. Features includes: • Measures 6" x 11" oval x 19"H • Fits 200' of 1/2" climbing line • Ergonomic back pad that easily removes for travel or storage • Climbing spec webbing used to reinforce all seams and wear points • Metal buckles and snaps, that will far out last plastic components • 1 large grommet on underside used as a drain hole, or to run rope out of bottom of bag • MOLLE webbing exterior and interior of bag for organization and racking gear.

RopePro Deluxe Bags

Buckingham announces the new Buck International line of rope bags featuring: • Water resistant fabric to help keep equipment dry •1 1/4" rope access port located in the lid with cap to keep dirt and water out • Zippered ventilation panels for air circulation and quick visual identification • Heavy duty lid zipper provides secure closure and maximum access to contents • Webbing gaps for tool holding clips and web loops for extra carabiners • Exterior pockets for additional storage • Attachment system for use with 4375 RopePro Deluxe Back Pack accessory

Model 4373 X-Large RopePro Deluxe Bag • Holds 500' of 1/2" rope or a saddle, helmet and 250' of rope • Measures: 24" Tall x 14" Wide

Model 4374 Large RopePro Deluxe Bag • Holds 250' of 1/2" rope or a saddle, helmet and 120' of rope • Measures: 16" Tall x 12" Wide

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

6

Model 4375 RopePro Deluxe Back Pack Attachment (sold separately) • Quickly converts a RopePro Deluxe bag to a backpack or climbing duffle • Padded for comfort and breathable materials for cool and dry operations • Carabiner storage loops in the shoulder straps • Adjustable chest strap • Reinforced edging and double stitching throughout


New Products

Model 6008-74+Y+4+Z

Model 6008-74D+4+Z

Model 6008-74+YV+Z

Dual BuckLimiter Model D6008Q1

Model 6008-74+Y+Y+Z

• Aluminum Alloy Construction Inside & Out: both the mechanism and housing made of corrosion resistant alloy. • Tangle free swivel top for added mobility. • 7' extension for expanded work area • Dyneema® polymer fiber 1" webbing up to 15x stronger than steel. Resistant to moisture, abrasions, UV light and chemicals. • A braking system designed for smooth consistent operation to prevent "jerky" lock-ups. • No factory recertification required. •Retractable unit (no hardware) only weighs 1.9lbs • Rated to 350 lbs.

Tie Back BuckLimiter Model 6008-74+Y+TC+Z

Self Retracting Lanyard

Tie Back BuckStop Lanyard Model 5V+T7A16X6 - Buck Stop Lanyard The Tie Back Buck Stop Lanyard features locking rope snap and a N 3618 tie back snap and 1" polyester web with a nylon tube. The +Z Suffix indicates the hardware meets ANSI Z359.12-2009.

Model 6007-164DV+Z 16' Lightweight Webbing Retractable Lifeline Features a light yet rugged composite housing. Housing swivels minimizing twisting during use. Meets ANSI Z359.14. Weighs 4.6lbs.

N 3618 Tie back snap

Dowel & Screw Replaceable Climbers Buckingham Replaceable Climbers are now even easier to replace! The Dowel and Screw Replaceable Climber Gaffs are available for any climber issued January 2011 or later.

Model NB9106A for use with all T, TB & SB, CCA replaceable gaff pole climbers.

Model NB9206A for use with all T, TB & SB replaceable gaff pole climbers.

7

Model NB9306 for use with all titanium and steel replaceable gaff tree climbers.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

New Products

Buck Limiter - Personal Fall Limiters


New Products

Notes:

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

8


Buckingham’s skilled craftsmen make the widest choice of climbers, including narrow climbers, to provide each user with proper fit and comfort.

Linemen in Tanzania - Photo courtesy of Northwest Lineman College


Climber Information

Climbers

We at Buckingham are committed to making sure that our equipment can help you be safe at work. Our skilled craftsmen make the widest choice of climbers and options to provide each user with proper fit and comfort. All of our leg irons and gaffs are inspected throughout the manufacturing process and samples from each lot are tested to destruction. Buckingham climbers are rated to 350 lbs. when the user is fully outfitted with tools and equipment.

Strength & Reliability

All of Buckingham's leg irons and gaffs are inspected throughout the manufacturing process and samples from each lot are tested to destruction. Buckingham climber leg irons are manufactured from selected high strength grades of steel and titanium. Gaffs are forged from a quality steel. Before, during and after manufacturing climbers from every production lot undergo rigorous testing. They are subjected to physical abuse far beyond that encountered in normal use. • Leg irons are bent 180° around a two inch diameter mandrel to test for ductility. • Gaff tips are bent 3/4" beyond normal position. • Gaff security is checked then reexamined for loose gaffs. • Hardness of steel in both leg irons and gaffs are rechecked through Rockwell readings. • Gaffs are magnaflux inspected to ensure there are no flaws in the forging. • Upon completion, every climber is reviewed to insure the gaff angle, position and contour meet very tight tolerances. • Once the gaff has been final honed, it is inspected to make sure width, thickness, length, and radius meet the specified requirements. • Random sample climbers are fatigue cycle tested to simulate a lineman climbing a pole. • The deformation test is to aid in the elimination of climber fatigue in the event a climber is used in an unusual manner such as descending a pole with large steps.

Climber Safety & Inspection Climbers and all safety equipment must be inspected before use. While inspecting climbers look for: • Visible Cracks - usually a fine jagged line • Cuts or marks in the steel - create stress risers causing the climber to break at that point • Make sure loop on climber sleeve is secure • Make sure footstrap ring or loop is secured to climber stirrup • Use two fasteners to secure the sleeve to the climber • Inspect climber straps for cuts and excessive wear • Make sure the pad loops are secure and free of cuts and are not worn thin • Inspect climber stirrup to be sure it's not worn too thin If any of these conditions exist, discontinue use immediately.

Never chisel initials or marks into climbers! This is what happened to a climber with a stress riser. Someone chiseled their initial 'L' into the climber shank. It eventually broke in the spot the shank was initialed.

Gaff Maintenance Model 6025 Model 6025C for CCA Gaffs Correctly shaped gaffs are essential for climbing safety. Buckingham offers a Pole Gaff Maintenance Kit to safely and properly shape gaffs. Kit Includes: 6058 - Smooth, single cut file 6303 - Pole Gaff Gauge (6303C for CCA Gaff ) 6501 - Finishing Hone

Inspect Your Climbers As Well As All Safety Equipment Before Each Use! Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

10


Climber Options & Sizing

No two people are alike, that is why Buckingham offers the widest choice of climbers and options to provide users with a customized, comfortable fit.

Non Contoured Shank (Prefix T)

Contoured Shank (Prefix TB & SB)

Shank is straight from Shank top is straight the top of the sleeve with an outward curve to to the base of the accommodate the ankle gaff. bone.

Cleated Climbers

Twisted Shank (Add Suffix 'T')

Shank follows the contour of the calf muscle to help reduce chafing. Able to be used with metal insert but not recommended.

Offset Stirrup

Narrow Stirrup

Stirrup sits in the center of the foot.

Stirrup width of 4" opposed to the standard 4 1/2".

Cleated Climbers are also available. With 2 threaded replaceable cleat like logger spikes in the stirrup of the climber for traction climbing in wet and in damp conditions. Sold with 12 replacement cleats & wrench. To order, add an ‘S’ suffix to the climber number. Model TB95089S

Gaff Options Permanent Pole: Permanent Tree: • Standard 1 3/4” [4.5cm] • Tree 3 1/4” [8.25cm] • CCA 1 3/4” [4.5cm] Screw Style Replaceable Pole: Dowel & Screw Style Replaceable Pole: • Standard 1 3/4” [4.4cm] • Standard 1 3/4” [4.5cm]• CCA 1 3/4” [4.5cm] • CCA 1 5/8” [4.1cm] Pin Style Replaceable Pole: Replaceable Tree: • Standard 1 3/4” [4.4cm] • Tree 2 ¾” [7cm] • CCA 1 11/16” [4.3cm] See pg. 15 for Replaceable Gaff Details.

Proper Fit & Comfort

Proper fit is important to your comfort and safety. Correct climber length is normally measured from the boot sole under the instep to a point 1/2" below the bone projection just below the knee joint. Standard sleeves are included unless long sleeves are requested by adding suffix 'L' to the product number. Long sleeves are generally preferred by people over 6'2". Climber Sleeve Leg Length Adjustment Standard Stirrup Width

Narrow Stirrup Width

Standard Sleeves Model 9204

16 1/4" - 18 3/4" (40cm - 48cm)

14 1/2" - 17 1/4" (37cm - 42cm)

Long Sleeves Model 9202

19 1/4" - 21 3/4" (48cm - 55cm)

17 1/4" - 20 1/4" (37cm - 51cm)

Tape Measuring

11

Model 6025

9202 Long Sleeve 9204 Standard Sleeve

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Climbers

Climber Iron Options


Climbers

Titanium Pole Climbers Titanium Contoured Shank Replaceable Gaff Pole Climbers •Gold colored with chrome colored gaffs & sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Dowel and Screw style replaceable gaffs with 16° angle. •Climber with gaff weighs 1 lb. 2 oz. Leg Straps Climber Pads Foot Straps Model # Style CCA Model 21391 Model 2239 Model 3122 r Popula Choice TB94089A Offset X TB91089A Offset X X TB94059A Offset X X X TB91059A Offset X X X X For climbers with a narrow stirrup order TB96089A

Titanium Non Contoured Shank Replaceable Gaff Pole Climbers •Chrome colored with a black sleeves. •Non contoured shank and beveled stirrup. •Straight and Offset stirrups. •Dowel and Screw style replaceable gaff with 16° angle. •Climber with gaff weighs 1 lb. 2 oz. Foot Straps Leg Straps Climber Pads Model # Style CCA Model 21391 Model 2239 Model 3122 T94089A Offset X T91089A Offset X X T94059A Offset X X X T91059A Offset X X X X

Titanium Contoured Shank Permanent Gaff Pole Climbers •Silver colored with black sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Permanent gaff with 12° Angle. •Climber with gaff weighs 1 lb. 1 oz. Foot Straps Leg Straps Climber Pads Model # Style CCA Model 21391 Model 2239 Model 3122 TB98479 Offset X TB91079 Offset X X TB87479 Offset X X X TB81059 Offset X X X X

Leather Climbing Straps Are Available for all climbers

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

12


Steel Pole Climbers

•Blue color with chrome colored gaffs and sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Dowel and Screw style replaceable gaffs with 16° angle

Popular Choice

Model #

Style

SB94089A

Offset

SB91089A

Offset

SB94059A

Offset

SB91059A

Offset

CCA X X

Foot Straps Model 21391

Leg Straps Model 2239

Climber Pads Model 3122

X

-

-

X

-

-

X

X

X

X

X

X

For climbers with a narrow stirrup order SB96089A

Steel Contoured Shank Permanent Gaff Pole Climbers •Black color with chrome colored sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Permanent gaff with 12° angle.

Popular Choice

Model #

Style

98479

Offset

91079

Offset

87479

Offset

81059

Offset

CCA X X

Foot Straps Model 21391

Leg Straps Model 2239

Climber Pads Model 3122

X

-

-

X

-

-

X

X

X

X

X

X

For climbers with a narrow stirrup order 9047

Leather Climbing Straps Are Available for all climbers

Buckingham Climbers may be used by persons weighing up to 350 lbs. when fully outfitted with tools and equipment.

13

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Climbers

Steel Contoured Shank Replaceable Gaff Pole Climbers


Tree Climbers

Climbers

Buckingham Climbers may be used by persons weighing 350 lbs. when fully outfitted with tools and equipment.

Titanium Contoured Shank Replaceable Gaff Tree Climbers •Silver color with black gaffs and sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Dowel and Screw style replaceable gaff gaff with 23° angle. •Climber with gaff weighs 1 lb. 3.6 oz.

ular Pop es ic Cho

Model # - Style

Foot Straps Model 21391

Leg Straps Model 2239

Climber Pads Model 3122

TB95089 - Offset

X

-

-

TB93089 - Straight

X

-

-

TB95059 - Offset

X

X

X

TB93059 - Straight

X

X

X

For climbers with a narrow stirrup order TB97089

Titanium Contoured Shank Permanent Gaff Tree Climbers •Silver colored with with black sleeves. •Contoured shank for ankle relief and comfort. •Straight stirrup. •Permanent gaff with 19° angle. •Climber with gaff weighs 1 lb. 3.6 oz.

ular Pop e ic Cho

Model # - Style

Foot Straps Model 21391

Leg Straps Model 2239

Climber Pads Model 3122

TB91429R - Straight

X

-

-

TB81429R - Straight

X

X

X

Steel Contoured Shank Replaceable Gaff Tree Climbers •Black with chrome colored sleeves. •Contoured shank for ankle relief and comfort. •Straight and Offset stirrups. •Dowel and Screw style replaceable gaffs with 23° angle.

ular Pop ice Cho

Model # - Style

Foot Straps Model 21391

Leg Straps Model 2239

Climber Pads Model 3122

SB95089 - Offset

X

-

-

SB93089 - Straight

X

-

-

SB95059 - Offset

X

X

X

SB93059 - Straight

X

X

X

For climbers with a narrow stirrup order S97089

Steel Contoured Shank Permanent Gaff Tree Climbers •Black with chrome colored sleeves. •Contoured shank for ankle relief and comfort. •Straight stirrup. •Permanent gaff with 19° angle.

ular Pop ice Cho

Model # - Style

Foot Straps Model 21391

Leg Straps 2239

Climber Pads Model 3122

91429R - Straight

X

-

-

81429R - Straight

X

X

X

For climbers with a narrow stirrup order 9142NR

Leather Climbing Straps Are Available for all climbers Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

14


Buckingham Replaceable Gaffs

,& New ed! ov Impr er to e Easi replac

Dowel & Screw Comes with 4 Screws (Climbers issued Jan. 2011 or later)

Screw Style Comes with 4 Screws (Climbers issued prior to Jan. 2011)

Pin Style Comes with 4 Drive Lock Pins. (Climbers issued prior to Oct. 2007)

CCA Gaffs are designed to penetrate hard CCA poles with ease. Gaffs are 16 degree angled.

Pole Gaffs

Measures 1 3/4 (4.5 cm)

Model NB9106A for use with all T, TB & SB, CCA replaceable gaff pole climbers.

Measures 1 3/4 (4.5 cm)

Model NB9206A for use with all T, TB & SB replaceable gaff pole climbers.

Measures 1 5/8 (4.1 cm)

Model T9106A for use with all T, TB & SB, CCA replaceable gaff pole climbers.

Model T9206A for use with all T, TB & SB replaceable gaff pole climbers.

Measures 2 3/4 (7 cm)

Model TB9306 for use with all titanium and steel replaceable gaff tree climbers.

Measures 1 3/4" (4.5 cm)

Model 9206 for use with pole climbers 9209 (straight) and 9409 (offset).

Measures 2 3/4 (7 cm)

Model NB9306 for use with all titanium and steel replaceable gaff tree climbers.

Measures 1 3/4 (4.5 cm)

Measures 1 11/16 (4.3 cm)

Model 9106 for use with CCA pole climbers 9109 (straight) and 9009 (offset).

Tree Gaffs

Measures 2 3/4 (7 cm)

Model 9306 for use with tree climbers 9309 (straight) and 9509 (offset)

NOTE: To order replacement screws: Dowel & Screw: Model N11T, Screw Style: Model 11T (4/pkg), Pin Style: Model 11 (4/pkg) Rule of thumb: Buckingham recommends that all replaceable gaff climbers be replaced when the original gaff and one replacement set of gaffs have been worn out from normal use.

15

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Climbers

The Buckingham replaceable gaff climber came to being in WWI so the servicemen could climb both trees and poles, and if gaffs became damaged it was easier to carry spare gaffs rather than a whole set of climbers.


Climber Guide

Climbers

How to Properly Shape a Gaff

INSPECTION IS YOUR RESPONSIBILITY!

An improperly sharpened climber gaff may be as dangerous as a gaff not sharpened at all. The gaff radius tip is critical for gaff penetration. Follow the instructions to be sure of proper maintenance and have a qualified person inspect your work.

1. Place climber in a clamp 2. File gaff from heel to tip with blocks on each side to in a smooth over and down motion. Never file across protect the climber. or against the grain or the beehive of the gaff.

3. Slot marked “Correct” on the gaff gauge should be your GUIDE to proper shaping of the gaff tip.

4. Never use a pole gaff shorter than 1 1/4" long. Never use a tree gaff shorter than 2 1/4" long. 6. Check thickness of stirrup to ensure it is thick enough to support your weight.

5. Check gaff width and thickness at the 1/2" and 1" windows as illustrated in the instructions included with the gaff gauge. Model 6303 (6303C for CCA)

Hint: Before filing, color the gaff with a black marker to ensure you are taking material off evenly.

How to Perform the Plane Test This test may be used to determine that the gaff is correctly shaped and sharpened to properly penetrate the pole. Place the climber on a flat, soft pine or cedar board as shown in Fig. 1. Holding it upright with the shank parallel to the board, but with no pressure on the stirrup, push the climber forward along the board. If the gaff is properly shaped and sharpened and if the gaff angle with the wood is sufficient, the gaff point will dig into the wood and begin to hold within a distance of approximately 1" (2.54cm). If the climber gaff slides along the wood without digging in, or merely leaves a mark or groove in the wood as shown in Fig. 2 the gaff is either not properly sharpened and shaped or the gaff angle is too small. The gaff angle is built into the climber by the manufacturer and should be between 11 and 17 degrees with the climber placed parallel to the surface of the wood.

How to Perform the Pole Cut Out Test (A) Place the climber on the leg, holding the sleeve with the hand (palm facing the pole). With the leg at about a 30° angle to the pole and the foot about 12 inches off the ground, lightly jab the gaff into the pole to a distance of approximately 1/4". (C) Making certain that the strap loop is held against the pole with pressure from the leg, gradually exert full pressure of the foot straight down on the stirrup without raising the other foot off the ground to maintain balance if the gaff does not hold.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

(B) Keeping enough pressure on the stirrup to keep the gaff in the pole but not so much as to cause the gaff to penetrate any deeper, push the climber and the hand toward the pole by moving the knee until the strap loop of the sleeve is against the pole. (D) The point of the gaff shall cut into the wood and hold. The pole surface cut shall not be longer than 2 inches, measured from the point of gaff entry into the pole to the bottom of the cut on the pole surface.

16


Climber Guide How to Change Dowel & Screw Style Gaffs on Buckingham Climbers

Climbers

GAFF REMOVAL 1. Secure the climber such that the heads of the gaff attachment screws are facing you. Buckingham Mfg. recommends using a vise to secure. (Use protective jaw covers or small wooden blocks to prevent the climber from being marred). 2. With a 3/16” hex head wrench, loosen and remove the two gaff attachment screws. Remove the gaff from the opposite direction (see fig 1). 3. If gaff does not release from the leg iron, gently strike the gaff ridge approximately ½” from the tip on a soft surface such as a block of wood and remove. Ensure no damage is done to the leg iron or gaff dowel hole. Discard the gaff and gaff attachment screws. GAFF INSTALLATION 1. Press the gaff dowel into the gaff dowel hole of the leg iron, properly orientate the gaff so the tip is facing the stirrup, and align the screw holes of the gaff to the screw holes of the leg iron. 2. Insert the two included gaff attachment screws. Hand tighten the bottom gaff screw (nearest the gaff tip). Repeat hand tightening on the top gaff screw. Tighten using a 3/16” x 4” length Allen wrench (with maximum torque to achieve complete and maximum tightness, this method can yield Buckingham’s 235 inch pound tightening recommendation for these screws). Note: use of a longer wrench can yield results exceeding the 235 inch pound recommendation and result in stripping and / or fracture of the screw head. Visually inspect to ensure screw heads are flush with the inside surface of the climber leg iron. Gaff attachment screws should be replaced after the first time removed, but if re-using, apply a low to medium strength thread sealant (Loctite® or equivalent) to prevent the screws from loosening. Screws may not be removable if a permanent type thread sealant is used.

How to Change Screw Style Gaffs on Buckingham Climbers Figure 3

Figure 2

Figure 4

Figure 1

GAFF REMOVAL 1. Secure the climber such that the heads of the hex head fasteners are facing you (Buckingham Mfg. recommends using a vise with protective jaw covers or small wooden blocks to secure the climber). 2. With a 5/32” hex head wrench loosen and remove the two hex head screws. See fig. 1. 3. To remove the gaff from the climber place the gaff on a soft surface such as a block of wood and strike the ridge of the gaff 5/8” from the tip of the gaff. The gaff will come out of the slot. See fig. 2. 4. Ensure no damage is done to the climber or climber slot. GAFF INSTALLATION 1. The climber slot and gaff lug are both manufactured for a precision fit. The climbers are then given a protective powder coat finish that may impede the insertion of gaff into climber slot. The finish may be removed from the boss hole and the gaff lug with fine emery cloth. 2. Press the front of the gaff lug into the climber leg iron slot. (A light coat of grease will ease insertion). It may be necessary to drive the gaff in by striking the back ridge of the gaff on a soft surface such as a block of wood. See Fig. 3 3. Insert the two black grade 8 screws and tighten using a 5/32” x 2 ¾” length Allen wrench. Hand tighten with maximum torque to achieve complete and maximum tightness. This method can yield Buckingham’s 136 inch pound tightening recommendation for these fasteners. Note: use of a longer wrench can yield results exceeding the 136 inch pound recommendation and result in stripping of the screw head. Visually inspect to ensure screw heads are flush with the inside surface of the climber leg iron. See fig. 4. 4. Screw fasteners should be replaced after the first time removed. If re-using, apply a low to medium strength thread sealant (Loctite® or equivalent) to prevent screws from loosening. Screws may not be removable if a permanent type thread sealant is used.

17

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Climbers

Notes:

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

18


Buckingham is committed to the comfort of Lineman and offers a variety of innovated climber accessories like the Big Buck Wrap Pad.


Climber Accessories

Climber Pads Climber pads are a major factor in the user's comfort. At Buckingham we offer more pad options than any manufacturer. Daily inspection should be done to ensure user's safety. Inspection checkpoints for climber pads: • Torn stitching • Ripped or torn leather • Loose / Damaged rivets • Hook & loop that does not adhere • Damaged cinch loop • Hook & loop wraps to minimum wrap label (longer hook & loop straps are available)

New & Improved Metal Inserts new

With the help of line personnel in the field Buckingham has developed a new, stronger metal insert that will hold up to the vigorous use in the field and for rodeo participants. Formed strap loop prevents sleeve from twisting out of insert.

Angled Metal Insert

Straight Metal Insert

Metal Insert for Klein Climbers Also available in straight style

Hook & Loop Wrap Pads Buckingham was the first manufacturer to introduce the industry to the revolutionary idea of the Hook & Loop Wrap Pad. The Hook & Loop Cushion Wrap Pads are easy to put on and more comfortable than conventional climber pads. Hook & Loop Pads feature: • 3" and 4" width; with or without a cinch loop

• The cinch loop design provides a tight fit

• Rolled edge to prevent chafing

• Maximum adjustability

• Available with or without metal inserts

• Fits Buckingham, Bashlin, Stringer Brooks* and Klein Climbers.

*To fit Stringer Brooks climber add the suffix 'S' to the model number, e.g. 3500CS with cinch or 3500S without cinch. Hook & Loop Pads with metal insert do not fit Stringer Brooks Climbers.

Big Buck Wrap Pad Model 3202C - Big Buck Wrap Pad Buckingham's innovative commitment to climber comfort has led to the new production of the Big Buck Wrap Pad. The Big Buck Wrap Pad is a combination of our two favorite climber pads. We have taken the adjustability of the Hook and Loop wrap pad, the increased surface area of the Big Buck pad and added a moisture wicking Dri-lex lining. Features also include: • Increased surface area to distribute pressure • Steel 'C-Pad' insert for proper climber shank position • Cinch loop to provide an extra tight fit • Rolled edge to prevent chafing

To order Big Buck Wrap Pads with an angled insert and no cinch use model number 3202. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

20


Climber Accessories

Climber Pads

All wrap pads are offered in XL size. XL adds 4" to length of strap. Recommended for anyone with calf circumference of 21" or larger.

Cushion Wrap Pads without Metal Insert Model 3503 & 3500 - Cushion Wrap Pads without Metal Insert Buckingham's Cushion Wrap Pads without metal insert secure with hook and loop to allow for maximum adjustability. The Cushion Wrap Pad is available in two different wrap widths: Model 3503 - 3" width Model 3500 - 4" width. To order pads with a cinch loop, add suffix "C" to the end of the part number.

Without Cinch • Continuous Wrap • Ideal for Rodeos

With Cinch • Pass Strap through the cinch loop • Pull Tight & Secure

Add suffix "C" to part number

Cushion Wrap Pads with Metal Insert Model 3502 & 3504 - Cushion Wrap Pads with Metal Insert The Cushion Wrap Pad with a metal insert is offered in a straight or angled design, with or without the cinch. The metal insert is designed to keep the climber shank stationary to reduce chafing to the leg. Buckingham does not recommend using angled inserts with twisted shank climbers. Cushion Wrap Pads with metal insert are offered in two different styles: Model 3502 4" Angled

Metal Insert

Cushion Wrap pads are available with a cinch or without a cinch: Without Cinch Continuous Wrap, Ideal for Rodeos

Model 3504 4" Straight

With Cinch (Add suffix "C" to part number) Passes through cinch loop,

pull tight and secure

To fit Klein Climbers add suffix "KL" Model 3502KL - 4" Angled Model 3504KL - 4" Straight Wrap pads for Klein climbers also available with cinch. Add suffix "C" to part number. Ex. 3502CKL

21

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Climber Accessories

Climber Pads Climber Pads with Straps Climber pads require a strap to attach the climber and climber pad to the leg.

Model 35032 & 35034 - 'C' Pad with Metal Insert The 'C' pad has gotten even better. With the help of line personnel in the field Buckingham has developed a new, stronger metal insert that will hold up to the vigorous use in the field and for rodeo participants. The 'C' pad has also been improved with a new thicker, oversized felt liner for additional comfort. The liner edge minimizes chafing on the leg and the metal insert prevents the climber shank from shifting on the calf, reducing irritation. • Requires a 26" Strap • Felt Lined • Heavy Leather Construction Style

Model Number

Angled

35032

Straight

35034

Klein

35032KL / 35034KL

Replacement Inserts

5032 (angled) / 5032S (straight)

Model 3126 - 'L' Pad The most comfortable 'L' pad on the market. The closed cell foam filler prevents the climber shank from irritating the user's leg. The rolled edges prevents chafing the calf muscle. Provides maximum comfort. • • • •

Rounded edges - no sharp corners to chafe leg Closed cell foam filler Tunnel design to hold shank Requires a 26" strap

Model 3127 - Climber Pads The 3127 provides increased support and helps to reduce leg irritation. The 8" wide pad secures the climber to the leg with dual straps and the thick felt filler prevents irritation from the climber shank rubbing the calf muscle. • • • • •

Requires two 26" straps Felt lined Tunnel design to keep climber shank rigid Heavy leather construction Dual strap design provides superior support

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

22

Fea and tures o Imp rov ur Ne w e d Ins ert Meta l


Climber Pads with Straps Model 3118 - Big Buck Pad Big Buck climber pad utilizes a double strap system, that fits 1" and 1 1/4" straps, to secure the pad to the calf resulting in superior support of the leg. An angled metal insert prevents the climber shank from shifting on the calf and the thick felt padding adds to the overall comfort making this climber pad a favorite among linemen and arborists. Comes with two pairs of 2639 straps (Big Buck pad requires two pair of leg straps). 9"H x 121/2"W

Model 3125 - 'L' Tunnel Pad The 'L' Tunnel pad has a soft 3/4" cushion sandwiched between two pieces of leather. 3 loops and a tunnel design to keep climber stationary.

Model 3120 - Rivetless Pad Rivet-less pad with a built in tunnel design. A soft leather is used against the leg. All leather construction with 3/4" padding.

Climber Accessories

Climber Pads

Model 3124 - 'T' Pad The 'T' pad has a thick felt liner and a tunnel design to stabilize the climber shank. All leather construction with 3/4" padding.

Model 3122 - Climber Pad A quality leather pad with 3 loops and a tunnel design to keep climber stationary. All leather construction with 3/4" padding.

Model 3119 Underpad This Hook and Loop Padded Leg protector mounts directly to the leg and underneath a standard climber pad. Provides an additional 1/4" of padding to protect the calf from being rubbed by the climber shank. Ideal for apprentice training. An elastic strap with hook and loop closure makes it easy to get on and off. It is recommended that users add an additional 2" of length to the top strap for a comfortable fit and adjustment. ONE SIZE FITS ALL. 10"H x 8 1/2"W

Model 3201 - 'I' Pad The 'I' pad cushions only the climber's shank with a minimum addition of weight. All leather construction with 3/4" padding.

23

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Climber Accessories

Climber Straps

Climber Straps

Safety Note: Climber straps should be inspected daily. Inspect for: •cuts, nicks or cracks •elongated holes •rotted leather •faulty buckle

Single Piece Straps Sold in Pairs

1" (25mm)

1" (25mm)

Nylon

Latigo Leather

22" (56cm)

2239

2234

24" (61cm)

2439

2434

24" (61cm) with Buckle Pad

2449

2444

26" (66cm)

2639

2634

26" (66cm) with Buckle Pad

2649

2644

28" (71cm)

2839

28344

28" (71cm) with Buckle Pad

2849

2844

-

263432

3049

-

30" (76cm) 30" (76cm) with Buckle Pad

One piece strap are used to weave through stirrup loop or as top straps

Two Piece Straps 1" (25mm)

1" (25mm)

Nylon

Latigo Leather

26" (66cm) assembled

21391

21341

26" (66cm) unassembled

2139

2134

Sold in Pairs

Two piece strap is permanently attached to stirrup ring.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

24


Comfort and safety are features Buckingham strives to provide our customers

Gaff Guards

OSHA requires gaff guards when climbers are not in use.

6909U - A coated wire universal pole gaff guard that fits all pole climbers: Buckingham, Bashlin, Klein and Stringer Brooks.

6909 - Only for Buckingham permanent pole gaff climbers.

60091 - Leather Gaff Guard with hook and loop fasteners 60091 - Tree 60092 - Pole Fits all climbers.

Climber Accessories

Climber Accessories

new

6909A Snap on Gaff Guard fits all Buckingham replaceable pole gaffs with a 16째 angle (A style).

60094 - Leather Gaff Guard works with all manufacturers replaceable or permanent pole gaff climbers. Hook and loop closures and reinforced steel rivets to prevent gaff tip from protruding.

60093 - Leather Gaff Guard with Bungee strap that attaches to the sleeve loop. Fits all climbers.

6009 - Leather Gaff Guard with a buckle fastener. Fits all climbers.

Climber Shields, Shank Pads & Footplates Model 10 - Climber Shield

Model 3128 - Shank Pad

A light weight shield that is ideal for apprentices. Helps prevent gaff puncture wounds when learning to climb. Shield attaches easily with one screw to the climber shank. Slot in shield allows for climber foot strap.

If the climber shank irritates your ankle try the benefit of a pad designed to cushion this tender area. A cushion between the climber and your ankle prevents the irritation.

Model 35033 - Climber Footplate

The climber footplate attaches easily to any steel or titanium climber. Two plate construction fastened together with two screws. Simply screw the two plates together with the rubber sole down. Standing on the pole was never so comfortable. Instructions packed with footplate. To order replacement screws use part #14. Not for use with aluminum climbers.

25

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Climber Accessories

Climber Accessories Miscellaneous Climber Accessories Model 996 & 9215 Sleeve Fasteners - There are two replacement sleeve fasteners. Model 996 uses a 10/32 threaded sem, and Model 9215 uses a barrel fastener and screw. Examine the hole in your climbers to see if they are threaded or smooth. Use Model 996 if threaded and, if smooth, use Model 9215.

Model 9204 Sleeves - Chrome colored short sleeves adjust from 16 1/4" to 18 3/4" for standard length climbers. Narrow stirrup climbers adjust from 14 1/2" to 17 1/4". Model 9202 Long Sleeves - Chrome colored long sleeves adjust from 19 1/4" to 21 3/4" for standard length climbers. Narrow stirrup climbers adjust from 17 1/4" to 20 1/4".

996 - Sleeve Fasteners

9204 9202

9215 - Sleeve Fasteners (Barrel) Model 9218 Split Ring - Replacement Split Rings for use with two piece climber straps. Split rings are sold in pairs.

Gaff Maintenance Model 6025 & 6025C - Gaff Maintenance Kit Correctly shaped gaffs are essential for climbing safety. Buckingham offers a gaff maintenance kit to safely and properly shape gaffs. Kit includes: 6058 smooth, single cut file 6303 pole gaff gauge (6303C for CCA Gaff ) 6501 finishing hone Order Model 6025C for CCA Kit

Model 6027 - Holder Multi-Gaff Gauge Holder for the crew foreman or safety director who has to check more than one manufacturers' climbers. Order gauges separately.

Buckingham Gaff Gauge Correctly shaped gaffs are essential for climbing. The Buckingham gauge is your guide to proper shaping. It is compact, uncomplicated, revealing and indispensable. Your gauge should be a busy tool. It defines your work, checks your progress and judges your results. In 30 seconds time the gauge will survey the condition of your climbers and indicate what is wrong, where it is wrong, and what needs to be done. Model - 6303 Pole Gaff Shaping Gauge Model - 6303C CCA Pole Gaff Shaping Gauge Model - 6306 Tree Gaff Shaping Gauge

Complete illustrated instructions are provided in a protective covering. They show each step in the shaping operation. Each tool may be purchased separately.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

26


Climb Comfortably with the new line of Ergovation products including the Buck ErgoBelt. Your back will thank you!


New Body Belts

Body Belts

Buck ErgoBelt & LineBacker Over the years, Linemen have had to adapt to the equipment they used causing stress and strain on their bodies. Buckingham teamed up with Ergonomic Specialist to design a line of products specifically for Linemen and Arborist that fit the human skeletal structure and make work more comfortable, safe and productive. The new Ergovation line from Buckingham makes hard work comfortable.

Su Bac pp k N or ot te d

Traditional Lineman's Belt Consist of two dee rings and offers no back support which can cause a curve in the lower back.

ne

Su Ba pp ck or te d

Su Ba pp ck or te d

Model 4200 - Buck ErgoBelt Consist of four dee rings and offers proper back support.

Model 4201 & 4202 Buck LineBacker Consist of four dee rings and offers proper back support. Model 4201 - Deluxe LineBacker

Model 4200 - Buck ErgoBelt

Model 4202 LineBacker

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

28

w


Body Belt Sizing

Body Belts

Buck ErgoBelt & LineBacker Sizing To size the Buck ErgoBelt, Buck LineBacker and the Buck LineBacker Deluxe for proper fit, the ‘A’ and ‘B’ measurements are required: • Measurement ‘A’ is measured approximately 2” above waist and from center of hip bone (seam of shirt) around the small of the back to the center of hip bone (seam of shirt) on other side. • Measurement ‘B’ is from center of navel around the small of the back to the center of navel. Measurement ‘B’ is taken in the same location as measurement ‘A’.

Measurement B 34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

16 17

M e a s u r e m e n t A

18 19 20 21 22 23 24 25 26 27 28 29

Conventional Body Belt Sizing The most critical measurement of a traditional body belt, in terms of comfort, is the dee measurement. The proper dee size is normally found by measuring from the prominent part of one hip bone around the back to the same point on the other hip bone. Add 4" (102mm) for light weight and Dri-lex® belts, and 2" (50mm) for padded belts so that the dee ring heels are just forward of the hip bones and not on them. All measuring should be done over clothing to be worn under the belt. Normal combinations of dee and belt measurements are shown on the next page.

X - Distance from waist to top of hip bone to where body belt is worn. Y - Measurement is from front of hip bone around the back to the front of the other hip bone. Measure - ("Y" distance) is hip to hip and add 2" to padded belts and 4" for lightweight Dri-lex belts.

29

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Body Belts

Body Belt Information All Buckingham body belts meet applicable OSHA standards, 1910.268 and 1926.959, the ASTM F887 standard plus all consensus and governing standards. Every Buckingham body belt is designed to provide the user with maximum comfort, safety and the necessary belt accessories. Body belts are designed for work positioning and not intended for fall arrest. All body belts come with pouch tabs, a tape thong, knife snap, sleeve bag ring, gut strap or suspender rings, and tool loops. All neoprene impregnated waist straps have 9 holes punched in the waist strap to accommodate for adjustment of heavy clothing in the winter. Buckingham body belts are tested to 350 lbs. A person who’s weight and tools do not exceed 350 lbs. can work safely. There is a surcharge for persons requiring a body belt larger than size 30 or smaller than size 18. Special sized body belts may not be returned.

Dee Sizing Chart For proper sizing, follow the body belt sizing instructions or previous page. Belt Strap Center Hole

in.

cm.

in.

cm.

in.

cm.

in.

cm.

Number of Tool Loops

D 18

46

32

81

36

91

40

102

3

D 19

48

33

84

37

94

41

104

3

D 20

51

34

86

38

97

42

107

3

D 21

53

36

91

40

102

44

112

4

D 22

56

37

94

41

104

45

114

4

D 23

58

38

97

42

107

46

117

4

D 24

61

40

102

44

112

48

122

4

D 25

64

41

104

45

114

49

125

4

D 26

66

42

107

46

117

50

127

4

D 27

69

44

112

48

122

52

132

4

D 28

71

45

114

49

125

53

135

4

D 29

74

46

117

50

127

54

137

4

D 30

76

47

119

51

130

55

140

4

Dee Size

Belt Strap Min

Belt Strap Max

*Belt Strap is Not Waist Size. Model 6087

Types of Body Belts

Model 6087 - Sizing Belt This sizing belt ensures accurate dee measurement. This belt is designed to provide the user with an exact hip to hip measurement. For proper belt size add 2 inches to padded belts and 4 inches to lightweight Dri-lex belts. Measures sizes 18 to 30. Semi Float

Full Float

The full float body belt allows the dee rings to shift approximately 4" and the waist strap is stationary.

On Semi-float body belts the dee rings are stationary and the waist strap shifts within the back pad.

Left Handed Body Belts can be ordered by adding suffix '0' to belt size. Ex: 2000M-220 Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

30


Body Belts Leather & Lightweight Dri-lex速

Pendin

g

Model 2100M is handcrafted of the highest quality leather. Bridge pieces and belt straps are crafted of leather with a nylon center to provide strength and longer life. Body belt features a 5 1/2" foam cushioned pad reinforced with rawhide lace, 2 large full float double bar dee rings, 2 small upper dee rings, 9" Back Pad. Waist strap only; no upper gut strap. Available in black (BL), burgundy (BU) and brown (BR). Weight 7.8 lbs. Measures 9"H. Model 2107M is handcrafted of the highest quality leather. Bridge pieces and belt straps are crafted of leather with a nylon center to provide strength and longer life. Body belt features a 5 1/2" foam cushioned pad reinforced with rawhide lace, 2 large full float double bar dee rings, 2 small upper dee rings, 9" Padded Back Pad. Removable MAN RATED gut strap. Available in black (BL), burgundy (BU) and brown (BR). Weight 9.2 lbs. Measures 9"H.

Model 2019M Lightweight Dri-lex速 lined body belt features, stacked dee rings, 2 large full float double bar dee, 2 small upper dee rings. Back support; no gut strap. Weight 6.35 lbs. Measures 9"H.

Model 2018M- Same as the 2019M but with a removable MAN RATED gut strap. (Must be used with a Buckingham provided man rated gut strap.) Measures 9"H.

31

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Body Belts

Full Float, Four Dee, Stacked Body Belts with Backsavers


Body Belts

Body Belts Full Float, Four Dee, In-Line Body Belts Leather & Lightweight Dri-lex速

Model 2000EM - This is the finest belt available and is hand crafted of the highest quality leather. It features a full float body belt with a 5 1/2" foam cushioned pad reinforced with rawhide lace. The belt strap is leather with a nylon center to provide strength and longer life. The floating dees provide 4" lateral movement to reduce the wear on the pole strap. Available in Black (BL), Burgundy (BU), or Brown (BR). Weight 7 lbs. Model 2014M - Lightweight Dri-lex速 lined body belt features four in line dee rings for attaching another strap when crossing an obstacle on the pole: 2 large full float double bar dee (front), 2 small dee rings (back), 5" cushioned back pad. Weight 6.35 lbs.

Model 2015M - Like the 2014M with an 8" back pad to provide additional support, this Lightweight Dri-lex速 lined body belt features four in line dee rings for attaching another strap when crossing an obstacle on the pole: 2 large full float double bar dee (front), 2 small dee rings (back). Weight 6.5 lbs.

Model 2017M Lightweight Dri-lex速 lined body belt features four in line dee rings for attaching another strap when crossing an obstacle on the pole: 2 large full float double bar dee (front), 2 small dee rings (back). Man Rated removable gut strap. Weight 6.5 lbs.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

32


Body Belts Add Suffix 'E' for four dee rings, applicable to all 2000 Series (special order only)

Model 2000M - This is the finest belt available and is hand crafted of the highest quality leather. It features a full float body belt with a 5 1/2" foam cushioned pad reinforced with rawhide lace. The belt strap is leather with a nylon center to provide strength and longer life. The floating dees provide 4" lateral movement to reduce the wear on the pole strap. Available in Black (BL), Burgundy (BU) or Brown (BR). Weight 7 lbs. Measures 5 1/2"H.

Model 1988M - This full float body belt has a 5 1/2" wide pad and utilizes a leather lined 6-ply neoprene impregnated nylon waist strap. The pad has a soft cushion to provide the user maximum comfort. The laced belt offers a quality look and added longevity for the user. Weight 7 lbs.

Model 1962M - A full float body belt constructed of the highest quality leather with a 6-ply neoprene impregnated waist nylon. The pad has rounded corners on the front to eliminate sharp edges from irritating the user when bending or reaching. The pad is 5" wide. Weight 5 lbs.

Model 19655M - The economy model of traditional full float body belts. The padded leather liner has a soft cushion. The 1 3/4" waist strap is made of 6-ply neoprene impregnated nylon. The formed leather bridge pieces allows the dee rings to float smoothly and easily. The pad width is 5". Weight 5 lbs.

33

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Body Belts

Full Float, Two Dee Body Belts


Body Belts

Body Belts Full Float, Two Dee Body Belts

Add Suffix 'E' for four dee rings, applicable to all 2000 Series (special order only)

Model 2012M - A light weight full float body belt with a 5" Dri-lex速 lined cushion pad designed to wick moisture away from the user. Superior comfort is provided by extra padding in the back support. Weight 6 lbs.

Model 2013M - A light weight full float body belt with a 8" Dri-lex速 lined cushion pad designed to wick moisture away from the user. Superior comfort is provided by extra padding in the back support. Weight 6.2 lbs.

Model 1993F - A lightweight full float body belt with an extra wide back support. The back pad is 8" of continuous firm cushion lined with durable brushed leather. The 1 3/4" waist strap is 6-ply neoprene impregnated nylon with 9 adjustment holes. Weight 6 lbs.

Model 1994FR - Designed to be functional, yet lightweight. Waist strap is constructed of 1 3/4" 6-ply neoprene nylon with 9 adjustment holes. 5" wide pad has rounded edges for added comfort and is covered with tuff duck nylon on the outside and brush leather against the user's back. Weight 6 lbs.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

34


Body Belts Add Suffix 'E' for four dee rings, applicable to all 2000 Series (special order only)

Model 20003M - The body belt section of Model 20003M is constructed using the padded 2000M belt and has the added feature of a stitched on backsaver. The extra width provides support to the back helping to relieve lower back strain. The backsaver helps hold the belt and the dee rings in the perfect location. The backsaver is tightened by the single strap with a tongue buckle. Backsaver is not designed as a life support belt. Available in Black (BL), Burgundy (BU), or Brown (BR). Measures 11 3/8" H.

Model 20005M - The backsaver attached to the padded 2000M body belt allows the user to adjust the back rest using two straps in the center of the back. The front of the backsaver is tightened using a single strap with a tongue buckle. Backsaver is not designed as a life support. Weight 7 lbs. Available in Black (BL) Burgundy (BU), and Brown (BR). Weighs 7 lbs. Measures 12 1/2" H.

Model 20006M - The body belt section of Model 20006M is constructed using the 2000M belt with padding removed and has the added feature of a backsaver constructed from a single piece of leather, eliminating a ridge line and minimizing chafing. Back Pad provides support to the back and fits comfortably on those with a shorter torso. The backsaver helps hold the belt and the dee rings in the perfect location. The backsaver is tightened by the single strap with a tongue buckle. Backsaver is not designed as a life support belt. Available in Black (BL), Burgundy (BU), or Brown (BR). Weighs 7 lbs. Measures 9" H.

35

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Body Belts

Full Float, Two Dee Body Belts with Backsaver


Body Belts

Body Belts Semi Float Body Belts

Belts are made so the waist strap shifts within the back pad

Model 1958 - This body belt has a 5" wide back pad made of the highest quality leather. The 1 3/4" waist strap is 6-ply neoprene impregnated nylon. The pad corners are rounded to prevent irritation when bending or reaching. Weighs 5 lbs.

Model 1902 - This body belt is an economy model of the typical linemen's belt using quality leathers with a 6-ply neoprene impregnated nylon 1 3/4" waist strap. The rounded edge and the 5" pad make this a favorite body belt among fixed dee ring, semi-float body belt users. Weighs 5 lbs.

Model 1997T2 - This body belt is a light weight semi-float body belt that can be attached to a harness utilizing quick connect plastic clips. This belt is ideal for someone climbing towers and needing back support and a place to hold tools. Weighs 4 lbs.

Ladder Belts Model 38523Q1 - Made of 1 3/4" (44mm) woven nylon sewn to a man-made synthetic material wear. A 3" (76mm) wide soft woven pad is attached for added comfort. Features leather tool loops, pouch tabs, tape thong and grommet holes on the billet end of strap for adjustment. Also features 2 stationary work positioning dee rings.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

36

Typical Fit of a Ladder Belt for a Person with Waist Size: 24 - 28

X-Small

28 - 32

Small

32 - 36

Medium

36 - 40

Large

40 - 44

X-Large


Body Belts Accessories

Body Belts

Suspenders

Suspenders are not intended to hold the belt without the assistance of the body belt waist strap being buckled. One Size Fits All. Model 6259 Model 6258 Leather Model 62583-Leather Woven nylon with suspenders with Model 62593 - Nylon leather shoulder shoulder pads are A suspender that pads designed to used to support the attaches to the belt disburse the weight weight of the belt and using adjustment of the belt and tools. tools. The 6258 uses a buckles that form a Straight keeper snap hook with a flat loop. Ideal if your body snap used to attach keeper to prevent the belt does not have suspender to the snap from disengaging suspension dee rings. body belt (25 lbs. accidentally (25 lbs. maximum support). maximum support).

Man Rated Gut Straps new Model 6263 - Man Rated Gut Strap Gut Strap is able to be used with any two dee body belt and is completely adjustable for users comfort. Belt features 5000lb man rated connections, leather lined strap, and standard tongue buckle.

Model 6264 - Man Rated Gut Strap Gut Strap is able to be used with any two dee body belt and is completely adjustable for users comfort. Belt features 5000lb man rated connections, leather lined strap, and easy to use quick connect buckles.

Non Man Rated Gut Straps Gut Straps are not to be used solely to support belt without assistance of body belt waist strap. Never detach the body belt waist strap tongue from the billet end of the waist while working aloft.

Model 6257 - Gut Strap Gut Strap is a heavy 1 3/4" leather waist belt with 4 buckles and snaps designed to help support the tool belt and tools.

Model 62531 - Gut Strap Designed for comfort and functionality. Sponge lined pad relieves irritation when bending. Connecting straps and snaps slide on the waist strap for aligning to suspension dee rings on body belt. Each snap supports up to 25 lbs.

Gut Strap Sizing

Typical Fits for a Person with Waist Size:: 24 - 28 X-Small 28 - 32 Small 32 - 36 Medium 36 - 40 Large 40 - 44 X-Large

Model 6256 - Gut Strap Gut Strap is a 4 ply nylon 1 3/4" waist belt with a wide leather pad to help support belt and provide added comfort.

Model 6272 - Gut Strap with Back Support Attaches to any body belt with four suspension dee rings. Back support features dual take-up straps in the back, wide back saver, and a front buckle to assure a comfortable fit. Backsaver width 9". For proper fit: take the dee size center hole measurement on Body Belt Sizing and subtract 2 i.e. dee size 23, center hole measurement is 42", subtract 2 and order a 6272-40.)

For an additional charge, leather suspenders & gut straps may be ordered in black, brown or burgundy to match your body belt.

37

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Body Belts Accessories

Body Belts

Accessories

F.

B. A.

A. Model 6107 Tape thongs connect to belt or holster by a rivet or barrel fastener.

C.

B. Model 341 Leather adjustable loop and strap to fit up to a 2" belt.

F. Model 2402 A nylon handline carrier that will straighten when approximately 14 - 18 lbs. pressure is applied to allow the handline to pull free.

D. E.

C. Model 6102 A durable wrench keeper designed to attach to the body belt. The strong leather back holds heavy tools the Bell Wrench. (Wrench is not included.) 2 1/2" x 3 3/4"

Model 2407-80 Handline System to raise and lower material at the work site. Includes the 500 lb. rated Buckingham handline hook, 750 lb. test rope snap, a 1000 lb. nylon block and 80' of 12 strand rope. The kit can also be purchased with 60', 100' and 120' rope lengths [2407-60, 2407-100 and 2407-120]. Custom rope lengths available upon request.

Model 2406 Handline Hook A reliable tool to raise and lower material at the work site. The welded eye and formed hook is rated to 500 lbs.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

38

D. Model 6104 Lowell Wrench holder constructed of two layers of heavy leather with a steel bracket. Barrel fasteners provided. (Wrench is not included.)

E. Model 6109 A wire hour glass shaped handline carrier that separates when approximately 14 - 18 lbs. of pressure is applied.

Model 201 Cleaner Model 202 Conditioner Clean and recondition your leather products regularly to extend their life. Lexol cleaner removes dirt and grime and the conditioner restores essential oils to keep leather soft and supple.


Body Belts Safety Tips

Inspect For • Loose or worn rivets

• Loose grommets or elongated holes on waist strap

• Worn material

• Broken accessory snap or ring

• Tool loops worn to allow tools to fall free

• Pocket tabs that won’t support pouches and tools

Never!

Immediately remove the belt from service if any of these conditions exist.

• Modify or punch a hole in a support component of the body belt. • Use a body belt made of all leather. • Disconnect waist strap and rely on gut strap or suspenders (suspenders & gut straps are rated to maximum of 25 lbs.). • Use an accessory ring, snap or suspender rings for work positioning. An extra hole was punched to fit a larger user.

Buckingham Strongly Recommends the Use of Locking Snap Hooks Do Not Use Improperly Configured Dee Rings when using a positioning strap with non-locking snap hooks 'D' Dee Ring

Exterior Circle Shaped Dee Ring

Use Properly Shaped Dee Rings When Using Nonlocking Snap Hooks

Excessive 'S' Bend

Double Bar Dee Single Bar Dee Ring Properly shaped Ring straight sides straight sides 'S' bend

Notes:

39

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Body Belts

• Cracks, nicks, distortion, or corrosion of hardware • Loose stitching, broken threads or burns

Inspect Your Body Belt Prior to Each Use!


Body Belts

Notes:

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

40


Buckingham's Pouches and Holsters are made with the highest quality leather and are built to last. Photo courtesy of Northwest Lineman College


Pouches & Holsters

Pouches & Holsters

Leather holsters are made of heavy tanned leather. Pouches and Holsters may be ordered, at an additional charge, to match body belt colors in black (BL suffix), brown (BR suffix), or burgundy (BU suffix). For left handed persons add suffix 'L' to reverse pockets. To prevent your holster from hanging too low order the short back holster by adding suffix 'S'.

Double Back Holsters

Double back holsters stay rigid, even after years of use, to ensure easy tool removal from the pockets. The double back design features pockets that are riveted to a thick layer of leather with another leather layer sewn over the rivet heads. Sandwiched in the middle of the leather layers is a plastic stiffener to keep the back rigid. Ch

o

Model 42266 • 5 Pockets • 10 3/4" x 8" • 2 Way Knife Snap

ic

e!

Model 4926-BR • 4 Pockets • 11" x 6 1/4"

Model 42666-BL • 5 Pockets • 10 3/4" x 8" • 2 Way Knife Snap • 4089 Knife Sheath Attached

Model 49261 4 Pockets • 11" x 6 1/4" • 2 Way Knife Snap

Model 49190 • 6 Pockets • 10" x 3 1/2"

Model 4951-BL • 2 speed wrench slots • 10" x 7" •3 Pocket

Model 4923 • 3 Pockets • 11" x 6 1/4"

Unassembled

Assembled

Model 49261S Model 42266S-BR • 4 Pocket • 8" x 5" • 5 Pockets • 2 Way Knife Snap • 8" x 9 1/4" • Short back • 2 Way Knife Snap Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

42

Model 66 Burr and Barrel Nut Fastener Kit. One assembled unit per package.


Single Back Holsters

Model 4051 • 1 Pocket • 11 3/4" x 3 3/4"

Model 4223 • 3 Pockets • 10 1/4" x 6"

Model 4020 • 2 Pockets • 11 1//2" x 4"

Model 4226 • 4 Pockets • 11” x 6 1/4”

Miscellaneous Holsters

Model 4089 • Knife Sheath • 9 1/2" x 3"

Model 40892 • Knife Sheath with Steel Clip •8 1/2" x 3"

Model 4079 • Knife Sheath • 9 1/2" x 3"

Model 4023 • 3 Pockets • 11 1/4" x 6 1/4"

Model 40231-BR • 3 Pockets • 11 1/4" x 6 1/4"

Model 5041 Top View

Model 5041

• 4 Pockets, 5 Tool Loops • 9 1/4" x 5 1/2"

Model 4659 • 9 Pockets w/ Hammer Loop & Tape Thong • 11" x 9 1/2"

43

Model 4164 • 8 Pockets • 10" x 7"

Model 4650 • 5 Pockets • 10" x 8 1/4"

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Pouches & Holsters

Pouches & Holsters Buckingham holsters are constructed of the highest quality leather and built to last. Our craftsmen take pride in their work and years of experience has proven to be an asset to manufacturing the best.


Pouches & Holsters

Pouches & Holsters Miscellaneous Holsters w

ne

Model 945 LEA Top View Model 949C • Made from ballistic Nylon • 15 pockets • 2" Tunnel to pass belt through (Tools not Included)

Model 945 LEA • Tool Holster • 5 Pockets, 4 Tool Loops • 8 1/2" x 6"

Model 628 •3 Pockets • 6 3/4" x 5 3/4"

Model 628 Side View

Model 4191 Top View Model 4191 • 7 Pockets, 4 Tool Loops • 8" x 6" x 2"

Model 931 • 5 Pocket • 10 1/2" x 4 5/8"

Model 930 • 3 Pockets • 10 1/2" x 4 5/8"

Model 4074 • 1 Tool Loop • 11" x 3 3/4"

Model 4076 • Spray Can Holder • 1 Pocket • 8" x 4"

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

44

Model 4013 • 1 Scissor Pocket • 6" x 2"


Pouches & Holsters

Pouches & Holsters Leather Nut & Bolt Bags ice!

Cho

Model 5302 - Nut & Bolt Bag A heavy duty Nut and Bolt Bag with side gussets to keep the bag open. Raw hide lace provided to connect to body belt. 9" x 6 1/2"

Model 5299 - Nut & Bolt Bag Available in Brown (BR), Black (BL), and Burgundy (BU). To specify color, add the designated abbreviation as a suffix to the model number. 10 1/4" x 10"

Model 52993-BR - Nut & Bolt Bag Model 4578 Like Model 5299 with 3 inside Nut & Bolt Bag pockets to accommodate speed Extra heavy duty nut & bolt wrenches. Available in Brown (BR), bag with a covered front Black (BL), and Burgundy (BU). To pocket. specify color, add the designated 10 1/4" x 10" abbreviation as a suffix to the model number. 10 1/4" x 10"

Industrial Carry Belts Order Industrial Carry Belts By Waist Size Fit is important to comfort. Be sure to allow for wear over heavy clothing. Size

Typically Fit for a Person with Waist Size

Small

28-32

Medium

32-36

Large

36-40

X-Large

40-44

Model 5279 - Carry All Belt • 2" Wide •Double Tongue

Model 6287 • 1 3/4" Wide • Single Tongue

Model 62872 1" wide, 50" long belt designed so user can cut off excess strap.

Model 1285 - Electrician Belt • 1 3/4" Wide • Accessory snap • Tool loop • Tape thong

Model 6286 - Telephone Installers Belt • 1 1/4" Wide • Adjustable slide buckle • T-buckle connection • Telephone hanger

45

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Pouches & Holsters

Notes:

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

46


Buckingham has been a leader in Wood Pole Fall Restraint Systems for over 10 years and continues to offer innovative products like the BuckSqueeze and SuperSqueeze to fit many climbing styles.


Positioning Straps

Wood Pole Fall Restraint Systems

Buckingham, leaders in Wood Pole Fall Restraint Systems for over 10 years, is pleased to offer multiple options to fit your climbing style. With outstanding factory support and follow up training, Buckingham Wood Pole Fall Restraint Systems are an easy choice.

The BuckSqueeze In production since 2000, the BuckSqueeze is the most widely used Wood Pole Fall Restriction Device in the U.S. With thousands in use and numerous documented saves, the BuckSqueeze provides Wood Pole Fall Protection during ascent and descent. With the use of a secondary lanyard, like the BuckAdjuster, the user is still protected while climbing over obstacles. Designed to grip the pole if the user starts to fall. For distribution poles with a circumference up to 50" (16" diameter) and transmission poles with a circumference up to 90" (28.7" diameter). Both 2011 & 2010 models are rated to 350 lbs.

Benefits • One disconnect to climb over an obstruction • Does not work itself out of adjustment • Friction buckle & cam buckle adjustments at user’s sides makes it easy to adjust for the circumference of the pole 2011 BuckSqueeze with WebGrab Model 482D - For distribution poles Model 482T - For transmission poles Buckingham has yet again enhanced the BuckSqueeze by adding their WebGrab to the green strap for even easier adjustment. new

A.

• No tongue buckle to adjust at the back of the pole • One model, with accessories, can be used during all seasons: Wet or Iced Poles with or without Conduit • CSA AB Certified 2010 Enhanced BuckSqueeze Model 483D - For distribution poles Model 484T - For transmission poles The original BuckSqueeze concept featuring a spring loaded cam to adjust the brown strap.

Model 482D

B.

Model 483D

D. E.

A. B. E.

F.

D.

F.

G. C.

Features A. 3 Slot Dee: Modifications were made with the 3 slot dee to increase rigidity of the strap while hitchhiking. All three slots are usable, but the center provides maximum rigidity. B. Serrated Roto-Snap: Carabiner with teeth that increases stopping power. C. Linkless Snap (Patent Pending): Less metal and easier adjustment to and from the pole. D. NEW Gold Spring Cam: Reduced tension to ease adjustment of brown strap. 13.43 lbf. to adjust. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

E. Cleat: Threaded removable cleat built into the housing of the CAM buckle improves the arresting ability in the event of a fall. F. Channel Handle: Paddle handle has a channel allowing the webbing to glide freely keeping the strap evenly spaced while ascending and descending. G. WebGrab (Patent Pending): Added to the green strap for even easier adjustment. (New 2011 Model)

48


The SuperSqueeze

The SuperSqueeze offers superb Wood Pole Fall Restriction and offers the easiest adjustment on the market. With Buckingham's patent pending WebGrab the SuperSqueeze can be adjusted with just a flick of the wrist. The SuperSqueeze can be configured to fit many climbing styles and needs, and it's modular design makes it easy to change out worn or damaged components or straps in the field. Rated to 310 lbs.

Benefits & Features • Easy One Handed Brown Strap & Green Woven Strap Adjustment with the New Buck WebGrab • Same Adjustability as the Rope BuckGrab but on Web • Modular Design for Easy Strap Change Out • Can Easily Change Out Worn or Damaged Components or Straps in the Field • Can Easily Be Configured to Use A Rope or Web Strap • One Disconnect to Climb Over An Obstruction

• Can Be Assembled for Right Handed or Left Handed Individuals • Outstanding Factory Support - Follow Up Training After The Sale • Lightweight Design: Rope Model = 4.5 lbs & Web Model = 4.85 lbs • Meets ASTM F887-11 Including Dry Pole, Wet Pole, Conduit & Iced Pole • All Straps & Rope Have Red Warning Center • 3600 lb. Gate Rated Hardware

Buck WebGrab Easiest Adjustment for the Circumference of the Pole and Distance from the Pole

Model 488W2Q3 for Distribution Model 488TW2Q3 for Transmission Features a WebGrab on the inner strap as well as the brown strap.

Available with Carabiners Model 488W2 for Distribution Model 488TW2 for Transmission

Model 488RQ4 for Distribution Model 488RTQ4 for Transmission Features a rope inner strap with BuckGrab LAD, and WebGrab on the brown strap.

Available with Carabiners Model 488R for Distribution Model 488RT for Transmission

49

Positioning Straps

Wood Pole Fall Restraint Systems

new

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Positioning Straps

Wood Pole Fall Restraint Accessories BuckSqueeze / SuperSqueeze Accessories

For BuckSqueeze Models Prior to 2010

Model 483C1-6 - Wear Guard For BuckSqueeze or Web SuperSqueeze. Made from black belting. Model 483C-6 Wear Guard for BuckSqueeze or Web SuperSqueeze. Made from black leather.

WPFR Secondary Positioning Straps

Model 487 - BuckWheel Used for icy or slippery poles. Angled wheel allows cutting edge to penetrate through ice and into the pole to arrest a fall.

Model 485 BuckTooth Used for climbing icy poles.

Model 48129W2Y - SuperStrap • Features the new patent pending WebGrab for easy adjustment. • Has all the benefits of web combined with the easy adjustment of rope. • Designed to use climbing over obstruction

Great for use with the BuckSqueeze and SuperSqueeze. Model 9-8 - BuckAdjuster (9 designates model # and 8 is the length in feet) • May be used as a primary work positioning device. • Stitched 1/2" rope lanyard with 1706 Snap Hook. • Green and white jacket with red core. • Features the new BuckGrab 5004B LAD (Length Adjusting Device)

ne

w

Model 48129W2Y-6 - 6' Model 48129W2Y-7 - 7' Model 48129W2Y-8 - 8' Model 48129W2Y-9 - 9'

Model 4812Y-8 Secondary Web Lanyard • Web Lanyard has a friction buckle for adjustment

Model 5004B - BuckGrab Patent Pending

Practice Pole Top Rescue

Pole top rescue requires practice to be proficient in a real life situation. Buckingham offers practice kits so expensive units are not damaged Model 38N99E - Pole Top Rescue with Model 483M - BuckSqueeze Rescue Trainer Conventional Positioning Strap Practice BuckSqueeze unit for hurt man rescue training. During practice the only part that is cut During practice the only part that is cut is the 30 1/2" is the 12" 6-ply neoprene piece that can orange nylon webbing. With replacement of the 30 1/2" be used 3 times and is less costly than strip, the unit can be reused. cutting a pole strap. It simulates how • 483A: 30 1/2" nylon strip with holes. difficult it is to cut the pole strap in a • 483A-50: 50' of webbing with punched real emergency. The other components holes. of the system may be reused. Model 483A

Model 483M

Replacement Practice Straps • 483A - 30 1/2" Nylon Strip with holes • 483A-50 - 50' Webbing with punched holes

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

• Model 38A-150 150' of six-ply neoprene with buckle holes spaced every three inches.

50

• Model 38A Two 12" six-ply neoprene strips with 4 punched holes.


Positioning straps, commonly referred to as pole straps or safety straps, are one part of a work positioning system designed to provide the user the ability to work and have free use of both hands. The positioning strap is not intended to be used as a fall protection device unless the user secures their strap above a cross arm, lattice tower, etc. limiting the fall distance to less than two feet. Buckingham provides the widest choice of positioning strap styles and options. There are three basic types of material used to manufacture a pole strap: 6-ply neoprene impregnated nylon, leather with a nylon center and woven nylon.

6 - Ply Neoprene Impregnated Positioning Straps

Positioning Straps

Conventional Positioning Straps

6-ply neoprene impregnated is the most widely used among utility line personnel. The 6-Ply neoprene features excellent abrasion resistance, contrasting center color to alert user to replace, stiff material to start & slides on pole easily. Tongue Buckle

Slide Buckle

!

ice Cho

Length 99E Lockers 77 Lockers

Model 386099E

Length 99E Lockers

77 Lockers

5'8"

384299E

384277

5'8"

344299E

344277

6'

386099E

386077

6'

346099E

346077

6'6"

386699E

386677

6'6"

346699E

346677

7'

387099E

387077

7'

347099E

347077

8'

388099E

388077

8'

348099E

348077

Model 346099E

Woven Nylon Positioning Straps Friction Buckle Adjusts easily with a friction buckle. Ideal for transmission towers, substations or ladders. Has contrasting red color to alert for wear.

Friction Buckle and Carabiner The woven nylon positioning strap uses a friction buckle in conjunction with a carabiner. Length

99E Lockers

77 Lockers

6'

48129Y-6

48127Y-6

6'6"

48129Y-66

48127Y-66

7'

48129Y-7

48127Y-7

8'

48129Y-8

48127Y-8

Length

99E Lockers

77 Lockers

5'8"

494299E

494277

6'

496099E

496077

6'6"

496699E

496677

7'

497099E

497077

8'

498099E

498077

Model 48129Y-6

Model 494299E

Leather with Woven Nylon Center A timeless tool among linemen and available in black (BL), burgundy (BU) and brown (BR). Features a tongue buckle and nylon center as a wear indicator.

Neoprene SuperStrap

ne

w

SuperStrap is made from 6 ply neoprene nylon with red warning core and features the patent pending WebGrab for easy adjustment, with no holes to find or run out of like conventional straps. Order Model 33709E for a SuperStrap with a Linkless snap on the WebGrab. Length

Model

Length

99E Lockers

77 Lockers

5'8"

334299E

5'8"

364299E

364277

6'

336099E

6'

366099E

366077

6'6"

336699E

6'6"

366699E

366677

7'

337099E

7'

367099E

367077

8'

338099E

51

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Positioning Straps

Positioning Strap Safety Guide Accessories

Model 99E An easy-to-use snap hook designed to operate like a nonlocker. This snap offers the widest opening to ease attachment and detachment with the glove hand.

Model 38189E Extension Strap 18" Provides extra length if positioning strap in not long enough. Simply connect the snap to the dee ring and the snap to the body belt.

Remember:

Model 77 The hinge points make this locker easy to handle. This locker is easy to operate with a gloved hand. The bump & lock system will not easily malfunction.

NEVER DEFEAT THE LOCK MECHANISM ON ANY LOCKING SNAP HOOK - It could result in a serious injury or death. • Always inspect equipment prior to each use. Check to make sure all lockers on hardware are in proper working condition • When attaching the positioning strap to the body belt, always look to ensure you are attached to the dee ring. • Never use a positioning strap if red is exposed. Exterior Circle 'D' Shaped • Never use an all leather positioning strap. Shaped Dee Ring Dee Ring • If repositioning, immediately recheck snap hook engagement. • Never hook snap hook to snap hook or back on to itself. • Never hook multiple snap hooks to a single dee ring. • Never attach a non-locking snap hook to a dee ring with an exterior circle or a 'D' shaped dee ring. • Never allow the positioning strap to become twisted.

Notes:

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

52


Buckingham offers an array of knives and tools to get the job done. The New ErgoBlade adds comfort to any knife application.


Knives & Tools

Buck ErgoBlade

Knives & Tools

Buckingham is proud to introduce the new ErgoBlade lineman’s skinning knife. With a 1 ¼” diameter rubber handle, w ne this knife fits comfortably in a gloved hand. The Round handle allows the user to create the proper cutting angle by rotating the knife within the hand instead of constantly, and repetitively, turning the wrist. The 5 ¾” long handle extends beyond the palm of the hand reducing the force needed to secure the knife while skinning cable. The textured rubber handle increases grip while working in inclement weather. • Model 70911 - Without Accessory Ring • Model 70912 - Blunt Point • Model 70913 - Notched Point • Model 70914 Notched & Blunt Point Model 7091 - Buck ErgoBlade

Buckskinner

Buckskinner - 3 P's for Stripping Cable

Model 7095 - Buckskinner The Buckskinner is ideal for stripping cable in any position, has the ability to strip outer jackets on overhead or underground cables up to 2" in diameter and features finger grips and a convex edge that cuts the jacket not the conductor. Dual handle design to quickly, easily and safely strip wire with less fatigue. User can flip over to use with one hand, just like a regular hook knife to do end connections. Finger guards prevents user lacerations. Sharpens like any other edge. Add Suffix 'R' for an accessory ring.

Penetrate the blade into the insulation jacket at approximately thirty degrees. Place thumbs under the cable, applying pressure against the bottom of the cable as the knife cuts the jacket. Pull with straightened arms once the sharpened edge is on the conductor, leaning back and easing the knife toward you to strip the insulation jacket.

Model 4051 Buckskinner Holster

Model 70951 Buckskinner Guard

Skinning Knives Buckingham knives are well accepted for their durable blades. The blade stays sharp, and when sharpening is needed, the honing stone can put a sharp edge on it in no time.

Accessory Ring

Without Accessory Ring

Blunt Point

Notched Blade

Notched & Blunt Point

7080

70801

70802

70803

70804

7086

70861

70862

70863

70864

7089

70891

70892

70893

70894

7090

70901

70902

70903

70904

Wood Handle

1 1/4" Dia Yellow Handle

1 1/8" Dia Red Handle

e! hoic

Cushioned Handle

C

7088 - 6" length with Comfortable Rubber Grip, High quality Steel Blade Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

54


No Need for Elaborate Dies! Chase & Renew Battered & Rusted Threads Just one tool, with the standard set of die blades, handles SAE, USS, NPT or Metric type threads in any pitch from 6 to 28 threads per inch - right or left hand threads - in any outside diameter from 1/4" up to and including 12" diameters, depending on the specific model. Model 6103

Model 6203

Model 62070 & 61060

Model 62040 & 6212

Outside diameter capacity of 1/4" to 1". Weighs 1 lb.

Outside diameter capacity of 1/4" to 1". Maximum handle swing of 3" for work in closely confined places. For such applications as cylinder head studs, 'U' bolts, wheel lugs, etc. Weighs 1 1/4 lbs.

62070 - Outside diameter capacity of 4" to 6". Has plain guide die blade which allows dies to pass over keyways and milled flats on threaded parts. Weighs 4 1/2 lbs.

62040 - Outside diameter capacity of 1" to 2 9/16". Same general design as Model 62070. Weighs 2 3/4 lbs.

61060 - Outside diameter capacity of 1 3/4" to 4". Same general design as Model 62070. Weighs 3 1/4 lbs.

ClimberKnives Accessories & Tools

Knives & Tools

Thread Restorers

Model 6212 - Outside diameter capacity of 6" to 12". Weighs 10 lbs.

Scissors & Accessories

More Pouches Available - See Pouches & Holsters Section

Model 7085 •Tempered •1 7/8" cut •Plated forged steel •Notched and serrated blades

Model 7075 •Stainless steel •1 7/8" cut •Less fatigue •Ice tempered •Notched & serrated blades

Model 7058CK Includes: • 7058 Pouch • 7088 Knife • 7085 Scissors

Model 7059 - Tool Pouch Designed to hold scissors, knife and can wrench. (Tools not included)

Model 7058J Includes • 7058 Pouch • 7088 Knife • 7075 Scissors • 2" x 7 1/2"

Model 4089 Knife Sheath

55

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Knives & Tools

Knives & Tools

Staple Stick

The Staple Stick allows for added dexterity and accuracy, especially when wearing rubber gloves. It also prevents the user from dropping staples or having them fly into the road or the user’s face. Approximately two loaded staple sticks service a standard distribution pole. The overall dimensions = 7/8" x 3/4" x 14 1/4" and the diameter of hole to hang stick = 1/2".

Model - 574 Model - 574L • Holds 12 staples • Holds 10 staples • Slots 1/8" W x 3/4" L • Slots 1/8" W x 1" L

To Use: Hold the stick with staple over the ground wire, hammer top of staple to get started, pull staple stick away and set staple.

Hang the Staple Stick on the belt while climbing.

Staple Puller Model 6400 - Staple Puller Aids in easy removal of staples installed over ground wire moulding. Welded bridge straddles the molding so removal is accomplished without damage.

6400 - Cushioned Handle

Strand & Wire Dispenser Model 6150 - Strand and Wire Dispenser A new design with strength where it is needed. Raise the pivoted swingaway arm, drop in the coil of strand, lower the arm and you are ready to cut the bands and feed strand. No loose parts to drop and lose, no unneeded metal bands with this sturdy tool. Handles full coils with ease while storing partially used ones safely. A time and labor saver. Available in Two Sizes: Model 6150 - 6"D x 30"W; 10 lbs. Model 61501 - 8"D x 36"W; 12 lbs.

Arm swings to drop in guide wire and arm locks with wing nut.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

56


Goat Wrench

ClimberKnives Accessories & Tools

Knives & Tools

Model 7071 - Goat Wrench Made from alloy steel to withstand hard usage. The jaws are designed so that a nut, bolt or pipe is drawn further into the throat as pressure is applied. Weighs 2 lbs.

Wheel Chocks Model 4559

Model 4558

Model 4559 & 4558 Wheel Chocks Buckingham wheel chocks grip the surface and the tire for a positive lock. The interior of wheel chocks have a void in the center to allow easy handling. Solid rubber chocks are available upon request. Model 4559 - Ribbed 10" x 8" x 6" (25 x 20 x 15cm), Weight 8.5 lbs (4 kg) Model 4558 - Smooth 10" x 8" x 5.5" (25 x 20 x 14cm), Weight 7 lbs. (3 kg)

Manhole Cover Hook

Model 6142 - Manhole Cover Hook This forged and heat treated hook is bent at just the right angle for easy lifting of vault and manhole covers. 26" (66 cm) long, weight 2 lbs, 4 oz. (1 kg).

Ground Rod Driver Model 6160 - Ground Rod Driver (with no moving parts) Rugged manual unit designed for one man to sink ground rods using the weight of the tool as the driving force. The permanently attached weight avoids finger crushing hazards. The dual-ended unit permits efficient use to start driving with "long" end, finish with "short" end. Fits over 5/8" ground rod. Overall length 6 feet (180 cm), weight 36 lbs. (16 kg). Inside diameter fits 5/8" rod.

57

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Knives & Tools

Notes:

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

58


Buckingham manufactures Guards and Scabbards to fit many different saws. All are made with high quality materials and are built to last. Photo Courtesy of ArborMaster速 Training


Guards & Scabbards

Guards & Scabbards

Buckingham's line of pruning saw scabbards are made from the highest quality top grain leather or rubberized belting material. They feature a 1/2" nylon washer and double thick leather spacers on the tooth side to ease inserting and removing the saw from the scabbard. A 1 1/8" steel ring is attached to the back, 3" down from the top, to suspend scabbard and saw closer to the user.

Saw Scabbards

Note: Clean out openings on the side and bottom to prevent buildup of saw chips and dust in the bottom of the scabbard. Dual Saw Scabbard Model 6223C - Belting Model 6223 - Leather Large pocket is designed for curved blade pruning saws with up to a 24" blade. Small pocket fits curved blade pruning saws with up to a 16" blade. Large Pocket: • Overall Length 26" (66cm) • Pocket Depth 21" (53cm) Small Pocket: • Overall Length 17" (43cm) • Pocket Depth 16" (41cm) Saw Scabbard Model 6222C - Belting Model 6222 - Leather Fits curved blade hand pruning saws with 22" and 24" blades. • Overall Length 26" (66cm) • Pocket Depth 21" (53cm)

Pole Saw Scabbard Model 60156C - Belting Fits Fanno blade F1-17S. • Overall Length 16" (41cm) • Pocket Depth 16" (41cm) • Wide 4" (10cm)

Saw Scabbard Model 6226C - Belting Model 6226 - Leather Fits curved blade hand pruning saws with a 26" blade. • Overall Length 30" (78cm) • Pocket Depth 26" (66cm)

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

60

Pole Saw Scabbard Model 65156C - Belting Fits Fanno blades #16 and #17 as well as Mundo pruning saws. • Overall Length 16" (41cm) • Pocket Depth 16" (41cm) • Wide 4" (10cm)

Straight Blade Scabbard Model 6016C - Belting Model 6016 - Leather Fits straight blade hand pruning saws with up to a 16" blade. • Overall Length 19 1/2" (49cm) • Pocket Depth 14 1/2" (37cm)


Saw Scabbards Saw Scabbard Model 6515C - Belting Model 6515 - Leather Designed to be used with curved blade hand pruning saws with up to a 16" blade. • Overall Length 3 1/2" x 19 3/4" (9cm x 50cm) • Pocket Depth 3" x 15" (8cm x 38cm)

Saw Scabbard Model 6515CP Belting Model 6515P Leather Designed to hold curved blade hand pruning saws with a 16" blade. A leather pruner pouch is included to hold hand pruners. • Overall Length 3 1/2" x 19 3/4" 9cm x 50cm) • Pocket Depth 3" x 15" (8cm x 38cm) • Pouch 2 1/2" x 5 3/4" (5cm x 12 cm)

Guards & Scabbards

Guards & Scabbards

Straight Saw Scabbard Model 6208C Belting Model 6208 Leather Designed to be used with pruning saws with a 22" to 26" blade length. • Overall Length 26" (66cm) • Pocket Depth 19 1/2" (50cm) Model 6221C - Belting Model 6221 - Leather • Overall Length 29" (74cm) • Pocket Depth 23" (58cm)

Miscellaneous Saw Scabbards Chainsaw Scabbard Model 60212C - Belting Model 60212 - Leather Prevents damage to chain and other equipment. For use with bar lengths from 12" to 14". • Overall Length 12 3/4" (32cm) • Pocket Depth 12" (30cm)

Single Edge Axe Cover Model 6029 - Leather Model 6029C - Belting 3" (8cm) x 5" (13cm)

Double Edge Axe Cover Model 60299C - Belting Model 60299 - Leather 5 3/4" x 11 1/2" (15cm x 29cm)

Chainsaw Scabbard Model 6022C - Belting Model 6022 - Leather Prevents damage to chain and other equipment. For use with bar lengths from 16" to 20". • Overall Length 18 1/4" (46cm) • Pocket Depth 17" (45cm)

Brush Axe Guard Model 6217 - Leather Model 6217C - Belting • Overall Depth 18" (45cm) • Pocket Depth 12" (30.5cm) • Width 6 1/2" (16.5cm)

Single Edge Axe Cover Model 6030 - Leather Model 6030C - Belting 4" x 9 1/2" (10cm x 24cm) Blade end depth 5 1/2" (14cm)

Hydraulic Pruner Guard Model 6031 - Leather Model 6031C - Belting • Overall 7 1/2" x 7 1/2" (19cm x 19 cm) • Pocket 6 3/4" x 6 3/4" (17cm x 17cm)

Manual Pruner Guard (Large) Model 6019 - Leather Model 6019C - Belting For pruners with 1 1/2" cutting capacity. 4 1/2" x 6 3/4" (11cm x 17cm)

Bow Saw Blade Guard Model 6225-21 - Leather Specify length when ordering. Model 6225-21 Fits 21" saw blade Model 6225-24 Fits 24" saw blade Model 6225-30 Fits 30" saw blade

Hydraulic Chainsaw Scabbard Model 6020C - Belting Model 6020 - Leather Hydraulic Chainsaw Scabbard • Overall Length 15" (38cm) • Width 3 1/4" (8cm) • Pocket 14 1/2" (37cm)

Manual Pruner Guard (Small) Model 6017 - Leather Model 6017C - Belting Pruners with 1" cutting capacity. 3 3/4" x 4 1/2" (10cm x 11cm)

Hydraulic Circle Saw Guard Model 62005 - Leather Model 62005C - Belting Fits circle saws with 9" blades.

61

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Guards & Scabbards

Notes:

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

62


Buckingham Canvas & Fiberglass products are Buck Tough and made from high quality materials to provide our customers with years of service.


Canvas & Fiberglass

Canvas Options

Buckingham has developed a line of canvas, coated vinyl , mesh and fiberglass products to accommodate and protect tools and equipment for linemen, arborists and industrial users. Our objective is to manufacture them of high quality materials to provide our customers a product that will provide years of service.

Custom Logos & Artwork Available

Contact us for custom logos and artwork of all your canvas products

Adder Description 1 Hard Bottom (4569 Series Only)

Adder Description G6 Gold Tuff Duck

B1

Blue Tuff Duck

H1

B2

Black Canvas

K

Adjustable Should Strap w/ Hard Body (Mainly Oval Buckets) S Pad PVC Bumper Bar to level while S1 Bronze 4958 Swivel Snap Suspended (Canvas Buckets)

L

Less Oval Bucket Hooks

S2

Two Attachment Snaps

L1

No Inside Pockets (Buckets Only)

S3

Z-711 1" Strap

B5 Blue TNX (Vinyl Coated Polyester)

L2

No Elastic Socket Holders (P/N 41333 & 45333)

S4 1/4" Spliced Polypropylene Rope

B6

Blue Magna Tuff

M1

Maroon TNX

S5

Three Attachment Snaps

B7

PVC Coated Black Tuff Duck

M2

Magnetic Strip

B8

Black Mesh

O

1000 D Neon Orange

S6

Adjustable Should Straps (Backpack Style)

B9

Blue Nylon (70 Denier)

Built-In Stiffener

Blue Mesh

Orange TNX (Vinyl Coated Polyester)

S7

B12

O1

Black 1680 Basket Weave Nylon

Pumpkin Orange Cordura

3/4" Web with Snap & Dee Attachment Straps

B13

O2

S9

B14

40 oz. Black Coated Vinyl

O3

7 oz. Blaze Orange PVC Fabric

T Oval Bucket add 2" to Height

C

Oval Bucket Nylon Handles

P

Outside Pocket (4569 Series)

T1

Oval Bucket Cover

C1

Tri-Suspension System (Canvas Only)

P1

Purple Cordura

T2

Add 10" of height to bucket

P2

Neon Pink Cordura

T3

Drawstring Closure

C4

# 4 Canvas

Hook and loop Closure

#10 Natural Canvas

Black Mesh Outside Closure w/ Hook and loop Closure

V

C5

P3

Wheel/Handle Mechanism

Camouflage (300/600 Denier)

Padded Bag

W1

C6

P4

All Terrain Wheel Assembly

Camouflage (1000 Denier)

One Clear Vinyl Pocket

W2

C7

P5

C8

#8 Natural Canvas

P6

Purple Tuff Duck

W3

All Terrain Wheel Assembly w/ Fixed Axel

D1

3/4" Steel D-Ring in Center

P7

Two Outside Pockets

Green Mesh

Red Magna Tuff

Yellow TNX 180 oz. (Vinyl Coated Polyester)

G1

R1

Y

G2

Green TNX (Vinyl Coated Polyester)

R2

Red Tuff Duck

Y1

Yellow TNX 22 oz. (Vinyl Coated Polyester) Yellow Cordura

Green Canvas

Red TNX 18oz. (Vinyl Coated Polyester)

Y2

G3

R3

Yellow Canvas

Neon Green Cordura

Red # 8 Canvas

Y3

G4

R4

Yellow Canvas TNX 14 oz.

Kelly Green Cordura

Rubber Bottom

Y4

G5

R5

Y5

Yellow Canvas # 4

B3 Black TNX (Vinyl Coated Polyester)

B4

Black Magna Tuff

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

64

Adder Description R6 Red Mesh


Fiberglass insert

Model 4545 Aerial Basket Cover This 18oz. vinyl coated nylon cover holds snugly on standard one-man buckets with a heavy sewn in bungee cord and snap to secure to the bucket. The secure grommet hole may be used to install tie line or for hang-up loop. Fits a 29" square bucket. Order Model 4548 for a larger aerial basket cover to fit two man baskets. Fits up to 50" x 62" basket.

Line Hose Bags

Model 45455 Aerial Basket Cover Features a fiberglass pyramid shaped insert. Measures 29" x 29" to fit various buckets. Increases water drainage. Outer cover same as 4545.

Canvas & Fiberglass

Aerial Bucket Covers

Aerial Accessories

For Fiberglass insert only. order Model 454551.

Aerial Bucket Covers Also Available in: Yellow (Suffix Y) Black (Suffix B3)

Hose bags are used for numerous purposes such as hoisting materials up and down poles or hot stick "caddy" for multiple sticks on a pole or aerial basket. Model 45150 - Line Hose Bag • Measures 12"dia x 48" length • Made of heavy weight canvas • 3/8" polypropylene handle • Molded 12" bottom with drain holes • Solid PVC ring • Available in yellow or orange coated nylon, add Y for yellow or O1 for orange to end of model number • Also available with snap, add S1 to end of model number Model 45151 - for bag measuring 12" dia. x 60" length

Hot Stick Bags Snap Closure

Carry Handle

Model 451509S1 Line Hose Bag • Measures 9" dia x 48" high. • PVC ring in top • Bronze swivel snap • Plastic bottom

Telescopic Hotstick Bag

Model 45158S1-44 XL Line Hose Bag An extra large sized Line Hose Bag. • 18" diameter x 44" high is large enough to store line hose or other miscellaneous equipment • Includes a PVC ring in top, bronze swivel snap and hard bottom

new

Model 45147Y • Measures 9" W x 9" D x 32" H • Features a hard bottom for added support • Suspends on the basket using 2 standard bucket hooks (Not Included). • Hook and loop closure designed to keep weather out • Manufactured with heavy duty vinyl coated nylon. • Includes 2 brass grommet drain holes in bottom.

Model 45152 • Measures 6"W x 72"L • Made of 18oz. yellow coated nylon • Heavy duty carry handle • Variable lengths available • Also available in orange coated nylon, add O1 to end of model number Model 45153 6" x 84" Model 45154 6" x 130" Model 45155 8" x 84" Model 45156 6" x 102" Model 45157 6" x 66"

65

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Canvas & Fiberglass

Aerial Tool Aprons

Aerial Accessories

All Buckingham Aprons are designed to provide years of service using heavy vinyl coated nylon or heavy canvas duck. Aerial Aprons feature pockets that are sewn through two layers of vinyl coated nylon plus one layer of heavy canvas and feature grommet holes for drainage. Two large 3/4" grommets reinforced with PVC rods suspend apron from the bucket using Buckingham PVC or polymer hooks. Model 4500Y Aerial Tool Apron Model 4500YM2 (Tools & Hooks not (Hooks not included) included) Same as 4500Y but • Measures 23 7/8"L x 4"W features a Magnetic x 21 3/4"H Strip to allow the • Sewn in stiffener lineman to store • PVC pipe for auger bit loose hardware and holder easily access it when • 11 Socket pockets with required. grommet drain holes • 2 Nut and bolt bags • 2 Pocket Holster • Hammer Loop

Model 4044 Aerial Tool Apron (Hooks not included) • Measures 29" H x 4" W x 24" L

Model 4045 Aerial Tool Apron (Hooks not included) • Measures 26" H x 4" W x 28" L

Model 4040 Heavy Canvas Tool Apron (Hooks not included) • Measures 18"L x 4"W x 10 1/2"H • Built in stiffener • 3 Pockets with 3 straps, 2 double pockets, and one large pocket

Model 4048 Heavy Canvas Tool Apron Mounts on door panel to hold miscellaneous small parts. • Overall 17 1/2"W x 28"L • Pockets–8 each measuring 8"W x 6 3/4"Deep • 4 PVC rods to maintain rigidity • Comes with bungee cord hanger

Model 4041 Heavy Canvas Tool Apron (Hooks not included) • Overall 18"L x 4"W x 19 1/2"H • 8 Tool Pockets, one large pocket and a knife snap • Sewn in stiffener • Rivet reinforcements

Model 4042 Heavy Canvas Tool Apron (Hooks not included) • Overall 18"L x 4"W x 10"H • Two pockets measuring 6"x8" • PVC Rods to support apron and pockets • Rivet reinforcements

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

66


Polymer Hooks Polymer hooks are molded from a mixture of plastics and nylon that give them high breaking strength and excellent cold resistance. new

Model 2405 - Polymer Hook A strong polymer hook that features a 1/2" tapered end allowing the user to hang up to four rubber blankets from an aerial basket without ripping the eyelets. Fits up to a 3" wide bucket lip.

Model 2401-3 - Polymer Hook Made from yellow model 11/16" O.D. polyment, this hook fits 3" Bucket Lips. Hook maintains its strength and flexibility through temperature extremes.

Nylon Hooks

Model 2401 - Polymer Hook Made from yellow model 11/16" O.D. polyment, this hook fits 2 1/4" Bucket Lips. Hook maintains its strength and flexibility through temperature extremes. Sold in pairs.

Model 2403 - Nylon Hook The 2403 hook is made of 100% nylon and is virtually indestructible if used in normal conditions. Hook stretches horizontally without breaking at 1,000 lbs and retains their physical properties up to 200o F (+93.3° C) and as low as -40o F (-4.4°). Fits 3" Bucket Lip. 5/8" stock. Sold in pairs.

PVC Hooks PVC hooks are formed from PVC Rod. These hooks are economical and offer a wide variety of styles.

Model 5175 • Cross Arm Hook • 3/4" stock (each)

Model 5358 • Aerial Basket fits 3" lip •5/8" stock (pair)

Canvas & Fiberglass

Aerial Accessory Hooks

Buckingham nylon, polymer and PVC hooks fit a wide range of aerial buckets and serve many applications.

Model 5034 • Aerial Basket • 3/4" stock (pair)

Model 5058 • Aerial Basket • 5/8" stock (pair)

Model 5434 • Aerial Basket fits 4 1/2" lip • 3/4" stock (pair)

67

Model 5134 S-Hook 3/4" stock (each)

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Canvas & Fiberglass

Nut & Bolt Bags

Buckingham Canvas Nut & Bolt Bags are made from top quality, heavy cotton duck. Some nut & bolt bags are made of durable 6oz. leather. All bags have reinforced tops, drain holes and attachment straps.

Canvas

4570

4570B2

4570M2

Models: 4570: 10" deep x 9" wide. U-shaped with no bottom corners to trap small parts. 4570B2: A 4570 in black canvas. 4570M2: With magnetic strip to allow the lineman to store loose hardware and easily access it when required. 4573: 10" deep x 9" wide. Same as 4570 but with reinforced vinyl bottom.

45100

4571: 10" deep x 9" wide. Same as 4570, but with inside pocket (6 3/4" x 9 1/4"). 45701: 10" deep x 9" wide. Same as 4570, but with inside pocket (6 3/4" x 9 1/4") and 1" friction buckle on straps. 45100: 9" deep x 9" wide. 4574: 9" deep x 9" wide. With rigid vinyl liner to keep pouch open.

Model 4595M2 The best built nut and bolt bag designed for many small parts that can be easily inserted and removed. Measuring 3" W x 9" H x 9" L , it is bigger than most bags. There is a plastic liner on the bottom of the bag to help keep the bag open and makes picking up small parts easier. A 2 1/8" long magnet can be used to stow metal hardware for easy access. A 2 1/2"x 3 1/2" outside pocket can be used for storage. The extra wide gusset makes it easy to insert a gloved hand to remove parts. This bag is built BuckTough - wear points have double thick canvas. Model 45703C4S9 An Equipment Storage Bag with a drawstring top. A bag specially designed to keep miscellaneous parts and tools securely stored while working aloft. Snap/ Dee attachment straps. Heavy weight canvas. Measures 3"W x 10"H x 9"L.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

4574

Model 45911M2 Finally, a canvas bag built with the lineman in mind. An inside pocket for organizing spare parts, web loops strategically positioned to store cotter pins during work, a powerful magnet, and a reinforced bottom to prevent premature wear makes this bag a must for any line worker. Measures 3" W x 8"H x 9"L.

new

Model 45702C4S9 Similar to model shown at left. Except elastic retainer prevents equipment from falling out while allowing easy access into the bag.

68


Leather

Model 5299-BR A strong pliable lightweight leather, ideal for maintenance and repair work. Measures 10"H x 3"W x 9"L .

Model 5288 Same construction as 5299 except has a tunnel piece to slip on belt. Measures 10"H x 3"W x 9"L.

Model 52993-BR Same construction as 5299 except with 3 inside pockets to store wrenches or screwdrivers. Measures 10"H x 3"W x 9"L

Canvas & Fiberglass

Nut & Bolt Bags

Above bags are available in black (BL), brown (BR) or burgundy (BU). Brown is standard. Add appropriate suffix to the model number for requested color. Model 5302 Made of heavy leather for long service and hard usage. This bag is considered a “must” by most linemen. With one of these spacious bags on your belt it is possible to carry loose tools, and connectors and remove with gloved hand. Measures 9"H x 3 1/2"W x 7"L

Model 52994-BR A leather nut and bolt bag with leather thongs for attachment to a body belt. Snap closure helps contain parts. Measures 9"H x 3"W x 8.5"L. Available in black (BL), brown (BR) or burgundy (BU). Brown is standard.

Tower Worker Nut & Bolt Bags A line of Tool, Nut and Bolts bags manufactured with the tower worker in mind. • Reinforced top keeps bag open • Available with a standard tunnel loop or dee ring/ • Heavy weight canvas for added durability attachment straps • An optional hook and loop closure is available to keep • Measures 10" H x 4" W x 10" L contents securely stored • Also available in 16" high

Tunnel Loop Attachment

Snap / Dee Attachment

45771S9 Nut/Bolt Bag 45771S9-16 Nut/Bolt Bag 16" high 45772S9 Nut/Bolt Bag w/ hook and loop Closure 45772S9-16 Nut/Bolt Bag w/hook and loop Closure 16" high Model 45772 Nut/Bolt Bag w/ Model 45771 Nut/Bolt Bag hook and loop Closure Model 45771-16 Nut/Bolt Bag Model 45772-16 Nut/Bolt Bag 16" high w/ hook and loop Closure 16" high

69

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Canvas & Fiberglass

Tool Bags Buckingham Tool Bags are Built to Last! All tool bags have the following construction: • Heavy canvas or vinyl coated nylon • 1/4" double tempered Masonite bottom • Six brass studs on bottom • Heavy duty nylon web handles sewn around the bag • Heavy steel top frame enclosed in canvas • Industrial weight nickel plated snaps on pockets Model 45333S • Dimensions 17"H x 11"W x 24"L • Made of heavy duty canvas • Adjustable and removable nylon shoulder strap with leather pad for comfort • Two side pockets for storing protectors, sockets and miscellaneous tools (one pocket has elastic socket holders. • Pocket bottoms are double lined for added wear • Hook and loop closure rain flap lined with TNX for added protection Model 45332 • Dimensions 17"H x 11"W x 24"L • Made of heavy duty canvas • One large outside pocket for storage of protectors or tools

• Heavy vinyl coated nylon bottom reinforcement • Top grain reinforced leather straps are double riveted with leather and weather sealed washers • Available in a variety of colors [see material chart] • Any tool bag can have a shoulder strap by adding suffix 'S' • Any tool bag 11" wide by 24" long can be made with hard rubber bottom by adding the suffix R5 Model 45333R5SY • Dimensions 15"H x11"W x 24"L • Two inch molded rubber lip protects against water getting into bag • Heavy gauge rubber for superior strength • The rigidity of the formed rubber bottom allows bag to maintain its shape • Double stitched body to the rubber bottom • Cleats on bottom are designed to prevent water from being absorbed Model 45300C • Dimensions 15"H x 7"W x 20"L • Made of heavy duty canvas • One inside pocket for small parts • Leather handles and straps • Order Model 45300C-24 for a 24" long bag (15"H x 7"W x 20"L)

Model 45331Y • Dimensions 17"H x 11"W 24"L • Made of heavy duty yellow coated nylon • Completely weather proof with fold over storm flap • Roomy inside pocket for storage of small parts

Model 506 - Small Tool Bag • Dimensions 14” L x 9” H x 6” W • Heavy canvas for maximum durability • Heavy duty zipper closure • Tempered Masonite bottom • 1” web carry handles Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Model 45334 • Dimensions 12"H x 9"W x 16"L • Web handles • Leather snap closure • Reinforced bottom

Model 506P7-14 - Small Tool Bag • Heavy canvas for maximum durability • Two large outside pocket with snap fasteners • Heavy duty zipper closure • Tempered Masonite bottom • 1” web carry handles • Measures 14” L x 9” H x 6” W

70


Model 41333R5SY • Hard rubber bottom equipment bag with 2" molded rubber lip to prevent water seeping into the bottom of the bag. • Heavy gauge rubber bottom is double stitched to the bag and is very durable, even in cold weather

Model 41333 • An economically priced equipment bag with features and quality of bags costing much more. • Two large (20" x 5" x 11") outside pockets can be secured with three snap fasteners •Vinyl coated nylon rain flap and heavy-duty leather straps and buckle to secure bag closed

Model 41333O1R5W1 Rubber Bottom Tool Bag with Wheels • Ideal for transporting equipment between trucks or to remote work sites. • Heavy-duty rubber wheels designed for years of use.

Model 41333C7R5W3 Camouflage Canvas Bag with Rubber Bottom • 6" diameter heavy duty rubber wheels • Ideal for transporting equipment in rough terrain • Push button handle retracts when not in use

• Push button handle retracts when not in use. • Wheels can be manufactured with any 11"W x 24"L rubber bottom tool bag by adding Suffix ‘W1’. IE. Model 4133301R5SW1. Model 4370B14 - Gear Bucket Haul Bag The Buck Gear Bucket constructed of 44oz. Vinyl with 4300 cubic inches of internal storage was built to withstand the most abusive environments and treatment. Features include: • Measures 13"Dia x 27"H • An ergonomic back pad that easily removes for travel or storage • Climbing spec webbing used to reinforce all seams and wear points • Metal buckles and snaps, that will far outlast plastic components • 2 large grommets on underside used for drain holes, or to run rope out of bottom • MOLLE webbing on exterior and interior of bag for organizing and racking gear • Fits 200' of rope

Canvas & Fiberglass

Tool Bags

new

Option W3 All terrain wheel assembly with fixed axel

Model 4371B14 - Rope Pail Haul Bag The Rope Pail constructed of 44oz. Vinyl was designed for the Arborist, Tower Worker, or Rope Access Technician, who has to haul their rope around and needs to pack it quickly and conveniently while keeping pace on the vertical job site. Features includes: • Measures 6" x 11" oval x 19"H • Fits 200' of 1/2" climbing line • Ergonomic back pad that easily removes for travel or storage • Climbing spec webbing used to reinforce all seams and wear points • Metal buckles and snaps, that will far out last plastic components • 1 large grommet on underside used as a drain hole, or to run rope out of bottom of bag • MOLLE webbing exterior and interior of bag for organization and racking gear.

new

71

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Canvas & Fiberglass

Utility Bags

You'll Find Many Uses for these Popular Bags!

Model 45400R2-18 • Dimensions 18"L x 9.5"H x 9.5"W •Ideal for carrying personal fall protection equipment • Made from heavy weight red water resistant polyester •Strong nylon handles 1,000 lb. break strength •Nylon zipper closure that won’t corrode or bind •Available in blue, add suffix B to end of model number Model 45400-12 for 12" Model 45400-24 for 24"

Model 45521 • Dimensions 13" H x 11" W x 22" L • Web handles • 1 outside pocket • Inside pocket • Leather strap closure on bag and pockets • For shoulder strap add suffix 'S'.

Model 5000B Dimensions 21"L x 11"H x 10"W • Made from heavy duty yellow coated nylon • Ideal for carrying or storing winches, safety gear, etc. • Nylon zipper closure won't corrode or bind • Strong nylon handles 1,000 lb. break strength • Available in orange coated nylon, add suffix O1 to end of model number

Model 45299 Bag has hundreds or uses. • Dimensions 17"L x 24"H x 6"W • Constructed of heavy canvas • Reinforced bottom for durability. • Double carry handles for added strength

Model 45402R-36 An extra large Duffel Bag designed to carry miscellaneous equipment. •Dimensions 12" Dia x 36" L

Model 50037BY - Tripod Bag •Dimensions 56"L x 22"W Tapered • Made from heavy duty yellow coated nylon • Strong nylon handles surround the bag for added carrying strength • Snap closures along entire length • Fits 7' tripod • Available in orange coated nylon, add suffix O1 • Model 50039BY fits 9' tripod

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Model 45297 • Double ply bottom • Grommet drain hole • 1 3/4" web handle/shoulder strap

72


Tool Buckets have many unique features that make them EXTRA TOUGH! Features include: • Leather Side Supports - Reinforcement at rope holes to prevent wear of canvas. • Nylon Thread - Heavy durable thread that will not rot. • Unique Construction - Heavy Canvas construction that is folded over outside stitches to protect thread from abrasion and then stitched again on outside for added strength.

• Polypropylene Rope - Won't rot. Spliced for added durability. • Solid PVC Ring - Top ring is continuous solid PVC material, stronger than typical PVC rod. • Bottoms - Made from high impact thermoplastic rubber or leather for durability under the toughest working conditions.

Model 1215 •Measures 12"Dia x 15"H • Heavy canvas construction • Solid continuous PVC ring in top • Polypropylene rope with 4958 brass swivel snap • 8" x 8" inside pocket • Molded rubber bottom

Model 309C • Measures 9"Dia x 11 1/2"H • Heavy canvas construction • Steel top ring • Polypropylene rope with 4958 brass swivel snap • Inside glove strap • Molded rubber bottom

Model 1215TS

Also Available: • Model 1215TS - with drawstring top ideal for keeping parts from coming out during travel. • Model 1216 - without pocket • Model 1216P - with 15 inside pockets • Model 1217 - without snap • Model 1218 - without pocket and snap

Model 11227 (The Big One) • Measures 16"Dia x 23"H • Heavy canvas construction • 8" x 10" inside pocket • Polypropylene rope • Reinforced leather bottom

Model 11215 • Measures 12"Dia x 15"H • Heavy canvas construction • Solid continuous PVC ring in top • Polypropylene rope with 4958 brass swivel snap • 8" x 8" inside pocket • Leather bottom reinforced with Masonite 11215 Also Available: Model 11216 - without pocket Model 11217 - without snap Model 11218 - without pocket and snap

Canvas & Fiberglass

Total Quality for the Inside Out

Tool / Nose Bags

Mini Tool Buckets Model 1231

Model 1230

Model 1231 - Without Pockets Model 1230 - With Pockets • Measures 5"Dia x 7"H • Can be used for connectors, nuts and other small items • Can be set on desk or hung in vehicle for other uses • Great for safety awards

Note: Buckets may be made of yellow TNX material by adding suffix 'Y' to the model number i.e. 1215Y.

73

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Canvas & Fiberglass

Tool / Nose Buckets Miscellaneous Tool Buckets Model 1228S8 • Measures 9" Dia x 12" H • Loops accommodate up to 20 Amp tool cartridge shells • An extra large grommet can be used to suspend off a bucket hook • Includes a bronze swivel snap

Model 4958 Light Duty Handline & Tool Bucket Swivel Snap

Model 121514 • PVC ring • 14 outside pockets • Heavy canvas • Rubber bottom • 12" Dia x 12" H

(not for human support)

• 11/16" (17mm) Eye • 4 3/8" (111mm) Length • 9/16" (14mm) Opening

Tapered Tool Buckets Model 312C • Measures 12"Dia at top, 9"Dia at bottom x 13"H • 12" steel ring in top • Inside glove strap • Polypropylene rope with 4958 brass swivel snap • Molded rubber bottom • Heavy canvas

Model 311 • Measures 12"Dia at top, 9"Dia at bottom x 14"H • PVC molded top ring • Polypropylene rope with 4958 brass swivel snap • Molded rubber bottom • Heavy canvas

Model 1220 • Measures 12"Dia at top, 9"Dia at bottom x 13"H • PVC molded top ring • Polypropylene rope with 4958 brass swivel snap • Molded rubber bottom • Heavy canvas

Splicer Tool Buckets Canvas buckets that feature: • Polypropylene rope with 4985 brass swivel snap • 2 inside pockets •PVC molded top ring

• 4 outside pockets • Heavy canvas • Molded rubber bottom

Model 1213 Canvas Body with rubber bottom without swivel snap Model 11213 Canvas Body with rubber bottom with swivel snap Model 11223 Canvas Body with leather bottom Model 11233 Canvas Body with leather bottom with swivel snap Buckets Measure 9" Dia x 12"H

Model 1219 Heavy Canvas Body rubber bottom without swivel snap Model 11219 Heavy Canvas Body leather bottom Model 11229 Heavy Canvas Body rubber bottom with swivel snap Model 11239 Heavy Canvas Body leather bottom with swivel snap Buckets Measure 12"Dia x 22"H

Model 11213

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Model 11229

74


Buckingham oval buckets are designed to accommodate your needs. They are built to last and provide the user with enough variety of configurations to meet every need. If we don't have one that meets your needs we can build one that does. Model 12161 • Dimensions 14" L x 10"H x 6 1/2"W • Heavy canvas for maximum durability • 15 inside tool pockets • Built inside stiffeners so bucket won’t collapse • Large 13/16" grommet holes • Molded top ring • Two 5334 3/4" bucket hook by 3" width included • Durable molded bottom with drain holes • Order Model 12161L for bucket without PVC hooks Order Model 12161M2 for magnetic to store loose hardware for easy accessibility.

Canvas & Fiberglass

Oval Buckets

Canvas Buckets

Model 12162 • Dimensions 14" L x 10"H x 6 1/2"W • Heavy canvas for maximum durability • 15 inside tool pockets • 2 polypropylene ropes connected to a heavy snap for suspension • Durable molded bottom with drain holes • Molded top ring • Hooks not included

Model 12164 • Heavy canvas for maximum durability • 12 shell loops on front • Inside pocket 8" x 5" • Large 13/16" grommet hole • Durable molded bottom with drain holes • Molded top ring • Two 5334 PVC hooks included •Order Model 121614 for bucket without PVC hooks

Model 12163 • Measures 14"L x 10"H x 6 1/2"W • Heavy canvas for maximum durability • 13 outside tool pockets • Nylon web carry handles • Durable molded bottom with drain holes • Molded top ring • Hooks not included

Model 12166 • Measures 14"L x 6 1/2" W • Heavy canvas for maximum durability • 8 inside tool pockets • Large 13/16" grommet hole • Durable molded bottom with drain holes • Molded top ring • Two 5334 PVC hooks included • Order Model 12166L for bucket without PVC hooks • Order Model 121656 for bucket with 15 outside pockets

Model 12165L • Dimensions 14"L x 10"H x 6 1/2"W • Heavy canvas for maximum durability • 14 outside tool pockets • Nylon web carry handles • Large 13/16" grommet hole • Durable molded bottom with drain holes • Molded top ring • Hooks not included

All oval buckets are available with Hard Body style, add H1 to end of model number, example 12165H1. Oval buckets can have the bumper feature by adding the suffix letter "K" to the model number.

75

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Canvas & Fiberglass

Oval Buckets

Canvas Buckets Model 12169H1K • Measures 14"L x 10"H x 6 1/2"W • Heavy canvas for maximum durability • 12 inside pockets • PVC bumper to keep bucket from tilting on bucket • Molded rubber bottom • Two 5358 5/8" x 3" wide bucket hooks included • Without hooks order Model 12169H1KL

Model 12167 • Heavy canvas for maximum durability • 6 inside pockets • Large 13/16" grommet holes • Molded bottom • Two 5334 PVC hooks included • Order Model 12167L for bucket without hooks Order Model 12167H1 for bucket constructed with canvas exterior and a plastic liner.

Model 12168K • Measures 14"L x 19"H x 6 1/2"W • Same as 12168 with bumper added • Includes twp 5334 PVC hooks.

Model 121615CH1L • 14 Outside tool pockets • 15 inside pockets • Canvas exterior with hard body • No bucket hooks • Molded top ring • Heavy canvas • Nylon web handles • Hooks not included

Model 12168 • Heavy canvas for maximum durability • 9 inside tool pockets • 1 inside tool pouch • Molded rubber bottom • Two 5334 PVC hooks included • Order Model 12168L for bucket without hooks

Model 1216241 • Measures 14” L x 10” H x 6 1/2”W • Heavy canvas for maximum durability • 26 inside, and 15 outside pockets • Molded top ring • Durable molded bottom with drain holes • Manila suspension rope with 4958 brass swivel snap • Hooks not included Model 1216OS1H1L - Street Light Bulb Bag: • Measures 23"L x 14"H x 12.5"W • Designed to carry oversized bulbs aloft in an aerial basket • Solid luan bottom and hard body construction help keep bag rigid • Grommet in bottom provides adequate drainage • Hooks not included

All oval buckets are available with Hard Body style, add H1 to end of model number, example 12167H1. Any oval bucket can be made with the bumper feature by adding suffix "K" to the model number. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

76


Model 455400 - Straight Sides • Measures 14"L x 9"W x 3 1/2"Dia • Heavy duty canvas • Nickel plated steel snap fasteners • Double stitch rolled edges • Grommet hole in bottom for ventilation • Back snap with leather holder for hanging • Straight sided Cotton Duck Model Straight Sides 455300 For 12" (31cm) gloves 455400 For 14" (36cm) gloves 455401 For 18" (46cm) gloves

Model 521 - Glove and Sleeve Bag • Heavy duty canvas • Hook and loop closure • Back snap with leather holder for hanging • Grommet holes in bottom for ventilation •Double stitched rolled edges Cotton Duck Model Glove Pocket 519 17 1/2" x 3 1/2" 521 17" x 4"

455805Y - Tapered Sides • Measures 14"L x 8"W x 6" (top) tapers to 3" (bottom) dia • Yellow TNX (drop suffix 'Y' for canvas) • Double stitched rolled edges • Grommet hole in bottom for ventilation • Back snap with leather holder for hanging • Gusseted sides Yellow TNX Model Tapered Sides 455805 For 14" (36cm) gloves 455895 For 18" (46cm) gloves

Model 418 - Glove, Sleeve & Goggle Bag • Glove pocket 18" x 4 1/2" • Sleeve pocket 20" x 3" • Goggle pouch 7" x 4" • Heavy duty canvas • Nickel plated steel snap fasteners • Back snap with leather holder for hanging

Glove Sleeve 19" x 3 1/2" 20" x 4"

Reinforced Snap For Hanging Model 455200H1 - "Hard Body" Glove Bag • Measures 7"L x 20"H x 4"W • Heavy duty canvas • Rigid polyethylene on sides to prevent collapsing • Grommet holes in bottom for ventilation • Hook and loop closure • Back snap with leather holder for hanging

All glove bags can be made of orange or yellow vinyl by adding O1 (for orange) or Y (for yellow) to end of model number.

77

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Canvas & Fiberglass

Glove Bags


Canvas & Fiberglass

Traditional Sleeve Bags & Sleeve Roll Ups Model 45148 & 45149 - Hoist Bag • Sturdy canvas bags, with a #5258 hook to fit truck racks, provide a clean place to store nylon strap hoists, keeping them off the truck floor and extending the life of the hoist straps. •Model 45148 fits the Eaton Little Mule #300 and #344. Also fits Lug All #2 and #3. 38" long. • Model 45149 fits Lug All #4 and A.B. Chance 1 ton strap hoist. 42" long. • Available in yellow ('Y') or orange ('O') add appropriate suffix to model number

Model 4587 - Blanket Roll Up • Measures 3' x 6" • Heavy duty canvas • Webbing tie straps • Sewn web carry handle

Model 4588 - Blanket Bag • Heavy yellow vinyl • Nylon zipper closure won’t rust or corrode • 1 3/4" nylon carry handles • 6 3/4" x 40 1/2"

Model 4585 - Sleeve Roll-Up • Nylon reinforced vinyl • Hook and loop button fastening • Sized to hold X-long sleeves flat without folding • Dee ring to hang up • 32 1/2" x 21"

Model 528 - Sleeve Bag • Heavy duty canvas • Holds 29" sleeves • Tapered to support sleeves when hung on belt • Quick release snap on back • Snap closure top

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Model 5231 - Sleeve Bag • Measures 30"L x 3"W • Fits up to 29" sleeves • Front Pocket accommodates up to 18" gloves • A hook and loop retainer prevents sleeves from falling to the bottom • Also features a glove liner dust pouch • All pockets have a hook and loop closure

78


Model 45775 • A belt mounted tool bag that measures 14" high x 9" wide x 5" deep. • Constructed from heavy duty canvas with steel rivets for reinforcements at all stress points. • An 8"W x 5"H x 1"D inside pocket with two fasteners to keep parts securely stowed. • Features 8 inside tool loops and 2 inside tool/bull pin holders. • Tunnel piece accepts up to a 3" belt strap. • Reinforced top lip that keeps opening rigid

Model 526 Tower Beacon Carry Bag Allows the user to transport bulbs aloft. • Four individual compartments insure glass bulbs will not come in contact with each other. • A snap allows the bag to be attached to a harness. • A 1/8" steel ring on the bottom allows multiple bags to be attached. • A hook and loop closure keeps cover securely closed. • Measures 14" H x 8" D x 8" W • Individual pockets measuring 14" H x 4" D x 4" W.

Model 502 Jumper Cable Bag • Measures 5" x 13" x 19" • Made of heavy duty canvas • Hook and loop top closures • 1" nylon carry handle • Available in TNX, add suffix 'Y' yellow, and 'O' for orange

Model 4569R2-150 - Rope Bag • Made of heavy water resistant cordura fabric • Top drawstring to keep water out and rope or tools in • Sturdy when in use yet collapsible for storage when not used • Holds 150 ft. of 1/2" rope • Drawstring closure folds outward to give easy access Model 4569R2-120 for 120' of rope (12"x13") Model 4569R2-225 for 225' of rope (12"x22") Add 'P' after 4569 for an outside pocket

Model 4560 - Throw Line Bag • Measures 8" x 12" •Made of tough water resistant polyester fabric • Top drawstring closure • Used for carrying or storing throw line • Holds up to 100 ft. • Drawstring closure fold out for easy access to throw line

79

Model 5081R3 A bag specially designed to store your 15KV Jumpers. • Measure 5"H x 20"L x 3"Deep • Has an inside pocket with hook and loop closure. • Durable coated nylon material and 2 ply bottom for years of service. • A nylon web carry handle and hook and loop closure • Overall dimensions are 25" long x 28" high x 5" deep.

Model 4469B1-150 Back Pack Equipment Bag Makes it easy to carry a rescue line, tools or miscellaneous equipment aloft. •Measures 12"Dia x 16"H • Outside mesh pockets with hook and loop closures • Padded shoulder straps add to comfort • A drawstring top keeps equipment securely stored.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Canvas & Fiberglass

Specialty Canvas Items


Canvas & Fiberglass

Specialty Safety Products Model 5Y2-M - Arm Protectors Designed to prevent splinters in the forearm during apprentice lineman training Made from 1000 denier cordura for durability. Measures 16" long.

Model 694 - Rescue Buck • Height 5'6" • Ideal for pole top rescue training, retrieval training and fall protection testing • Fill with tire chips or ground up rubber to get desired training weight • Loop on back for lifting • Loops on front for holding body belt • Separate compartments for actual lifelike movement Model 694F1 - Rubber Pellets • Buck mix–55 lbs. of rubber pellets Model 38523-M body belt is recommended for the Rescue Buck

Model 4600S3Y First Aid Blood Stopper Pouch First Aid Blood Stopper Pouch with Attachment Snap The New First Aid Blood Stopper Pouch quickly attaches to any Buckingham saddle or body belt and contains one Model 4600D1Y First Aid Blood Stopper Pouch large blood stopper to control bleeding until the victim with 3/4" Steel Dee Ring can be administered First Aid on the ground. Secures to Model 4600NY First Aid Blood Stopper Pouch any body support using either an attachment snap or with 1 3/4" Nylon Belt Loop 3/4" steel dee ring. Measures 3 1/2" W X 5 1/2" H 1 Large Blood Stopper is Included with Each Kit

Warning Flags & Markers

Buckingham offers a wide variety of grounding, danger and line marker flags. All are constructed of a durable high visibility vinyl coated nylon for years of service. Custom screen printing, sizes and designs are available. Model 8451G7P5V Model 8454O3V Hi-visibility green DANGER Flag Hi-visibility Orange GROUNDS Flag With two reflective strips for easy visibility With two reflective strips on front and back at night. Hook and loop strap for for easy visibility at night. Hook and a secure attachment. Features a 6 loop straps for a secure attachment. 1/2" x 6 1/2" clear vinyl pocket on Wire attachment for hot line clamp back-side for crew, truck or company on top and PVC stiffener on bottom. information. PVC stiffener on top. Includes truck/radio # and service Measures 18 1/2" H x 16 1/2" W. To location lettering along the top. order without clear vinyl pocket and Measures 17 1/2" H x 16 1/2" W. snap closure attachment instead To order without truck/radio # and order Model 8451G7S. service location lettering order Model 8452O3V.

Model 8455G7-45 Model 8453O1-45 Hi-visibility green LINE Hi-visibility orange BEING PATROLLED WORKER ON LINE Marker Marker With two reflective strips With two reflective strips for easy visibility when for easy viewing at night. working at night. 1 1/2" 1 1/2" wide hook and wide hook and loop is used loop is used to securely to securely wrap around wrap around pole. 9" pole. 9 1/2" long x 7" wide L x 6" W clear vinyl clear vinyl pocket for truck, pocket for truck, crew crew or company information. or company information. Measures 45" L x 6" H. Order Measures 45" L x 7" H. Order Model 8453O1-50 for 50" Model 8455G7-50 for 50". Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

80


See Through Storage & Rope Mesh Bags These See Through Mesh Bags make it easy to locate carabiners and small accessories. No longer will you have to open every bag to find the right equipment. Mesh material also allows sufficient airflow through the bag, which aids in drying wet gear. Available in many different sizes and styles. See below for ordering information: 45400G1-9 5" Diameter X 9" Long 45400G1-12 9 1/2" Diameter X 12" Long 45400G1-18 9 1/2" Diameter X 18" Long 45400G1-24 9 1/2" Diameter X 24" Long 45400G1-30 9 1/2" Diameter X 30" Long 4560G1 8" Diameter X 12" High 4561G1 8" Diameter X 10" High

45400G1-9

Model 4540MB - Mesh Bag The new mesh bag is designed to contain a full body harness or other soft goods when laundering. Can also be used to store and carry miscellaneous equipment. The mesh design allows air to flow through reducing the possibility of mold and mildew. A heavy duty draw string closure keeps equipment securely inside. Measures 8"W x 14"H

Model 45500G1 Mesh Harness Tote Bag • Measures 13"L x 14"H • Made of heavy coated nylon mesh to let the harness breathe • Hook and loop closure • Grommet reinforced hole for hanging • Allows air circulation

4561G1

45400G1-18

Private Label Logos Available We'll give your logo center stage on your products. Generate team spirit and company recognition with your logo. Keeping your name in front of your customers and employees is just good business.

Model 4581 Ideal to hang on a step ladder to accommodate miscellaneous parts. A wire frame with a removable heat resistant PVC coated material. • Measures 9" D x7"W x 11" L • Metal frame to hang on ladder rung • Heat resistant material • Bag removes from frame

81

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Canvas & Fiberglass

Mesh Bags


Canvas & Fiberglass

Hydraulic Tool & Battery Storage Bags Hydraulic Tool Carry Bags Front

Back

Holster 4036B4

Model 4036B4 Greenlee & Fairmont Tool Holder Made to fit Greenlee and Fairmont battery powered, slim profile crimping tools. • Made of 1000 Denier Cordura® for maximum durability. • Nylon strap with hook and loop closure keeps tool securely stowed when not in use. • Snap and Dee ring attachment strap can be used to secure to a tool belt or suspend from an aerial basket hook. • A nylon carry strap, Model 4036S, can be purchased separately and easily attaches to the holster to be used for working on a ladder or underground. Strap 4036S

Model 40351B3 - Inline Hydraulic Crimper Carry Bag Designed to safely carry & store an inline crimper, charger, batteries and dies. • Measures 25 1/2"H x 11"W x 7"D •Tool pocket measures 22"L x 10"W with a hook and loop closure to keep the tool securely stowed • Charger/battery pocket, with hook and loop closure, measures 9 1/2" x 8 3/4"W • Die pocket measures 7 1/2"L x 7"W and features an elastic closure for easy access. • Adjustable shoulder strap • Grommets for mounting to an aerial basket • Durable vinyl coated nylon

Model 4555 - Battery Tool Holder

Overall Dimension – 14" x 4" x 14 1/2" Pocket Dimension – 6 1/2" x 4" x 14 1/2"

Manual Compression Tool Bags Model 4037 Compression Tool Holder • Heavy orange vinyl • Heavy neoprene nylon bottom to prevent premature wear • Grommet hole in bottom for drainage • Grommet eyes in top for suspension from bucket • 3 pockets for compression tools and/or a combination of bolt cutters • Overall dimensions 10"x26" Pocket 1 15" Pocket 2 18" Pocket 3 22" Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Model 4035Y Compression Tool Holder Two Pocket carry bag designed to carry an inline tool , spare batteries and dies • Measures 22"H x 10"W • Both pockets have a hook and loop closure that can be fastened out of the way for easy access to the pockets •Tool pocket measures 18"L x 8"W • Accessory pocket measures 8"L x 7"W • Padded bottom in tool pocket for added protection • Adjustable shoulder strap • Grommets for mounting to an aerial basket • Durable vinyl coated nylon

82


Model 4509 • 8.25"W x 8"D x 19"L • Built on hanger fits a 2 5/8" basket lip • Reinforced lip around tray • Built-in bumper keeps tray level

Canvas & Fiberglass

Tool Trays

Fiberglass Accessories

Model 4510 • 9"W x 11"D x 18"L • PVC hooks (#5334) included • May be hung inside or outside basket • B1 Bumper available

Model 4511 • 6.5"W x 19.25"D x 18.4"L • Built on hanger and bumper to keep level • Reinforced lip around edge for added strength • Built-in bumper keeps tray level

Model 4512 • 6"W x 8"D x 11.5"L • Built on hanger fits 3 3/4" basket lip • Ideal for trouble lantern • B2 Bumper is available

B1

Model 4510M2 With magnetic strip to allow the lineman to store loose hardware and easily access it when required.

B2

Bumpers are available to keep fiberglass tool trays and aprons level. Note the styles available: Model B1 - Half Circle Bumper Mode B2 - L-Shape Bumper

83

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Canvas & Fiberglass

Fiberglass Accessories

Now available with holes instead of built in hanger. Holes align with Model 4510 tool tray. Ideal for hanging tool tray on outside of a basket and the apron inside the basket.

Tool Aprons

Pouches

Model 45006 The 45006 is the top of the line tool board. It can hold numerous tools without having to carry them and it keeps them organized. • 20"W x 18"L • Removable fluorescent light ideal to illuminate tools and bucket • Light interchanges with small pocket to hold test set • Numerous pockets to hold all tools needed • Auger bit holder • B1 Bumper is available • Reinforced 4-ply neoprene nylon behind the leather pouches for added strength • Order Model 400094 for Light Replacement Order • Light illustrated not available The 45006 is the top of the line tool board. It can hold numerous tools without having to carry them and it keeps them organized.

Model 4505 • 20" W x 20 1/2" L • Auger bit holder • Wrench and hammer loops • Canvas nut and bolt bag • B1 Bumper is available

Model 45004 - Model 4500 with Model 4226 four pocket holster replaces the 3 pocket holster.

Model 45003 • 20" W x 18" L • 4 pocket holster • Wrench and hammer loops • Knife pouch • 5299 leather nut and bolt bag

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Model 4500 • 20" W x 18" L • 3 pocket holster • Wrench and hammer loops • Canvas nut and bolt bag • B1 Bumper is available

Model 4501 - A Bare board to allow for a custom designed board layout. Measures 20" W x 18" L

84


Non-Rotating Reach Bucket Tool Holder The economical long reach bucket tool holder offers the user a secure method to hold long reach tools horizontally on the basket lip and vertically inside the basket. It does not allow the tool holder clip to rotate 360 degrees nor allow the user to physically move the clip from horizontal to vertical position as the 4590 model. The non-rotating version does provide the user a permanent vertical and/or horizontal mount. This unit provides multiple options to accommodate the user's needs as shown below: Mounting Brackets Model 4589

45891 4589

4589

4589

Two of the 4589 Mount two 4589's to hold one mounts allows user to tool horizontal. hold one single stick.

Long Reach Hydraulic Boom Tool Holders

A combination of 4589/45891 allows user to hold one saw horizontal and two vertical.

Model 4530R - Handle Holder • Round boom-mount with ratchet closure • Clip spring accepts handle end of hydraulic tool • Redesigned spring clips–Now more durable • Foam pad to prevent slippage on boom Round Boom 4530R - Handle 4531R - Chainsaw 4532R - Pruner Model 45301R - Square Boom Select a Long Reach Boom Tool Holder: Square Boom 45301R - Handle 45311R - Chainsaw 45321R - Pruner

Model 4531R Chainsaw Holder • Accepts chainsaw head • Ratchet closure to attach to boom • Foam back to prevent slippage

Model 45311RC • Extra long to shield boom

85

45891

Mount 4589 and 45891 to hold multiple tools - two vertical and one horizontal.

Hydraulic Boom Tool Holders Round Square Boom Boom Handle End 4530R 45301R Replacement 45302** 45302** Clip Chainsaw 4531R* 45311R* Replacement 45312** 453112** Pocket Pruner 4532R* 45321R* Replacement 45322** 453212** Pocket Circular Saw NA 453311R *Extra long base available to prevent damage to boom when inserting and removing tool. Add suffix 'C' (i.e. 4531RC) **All replacement parts come with sticky backed foam and fasteners

Model 4532R - Pruner Holder • Round boom-mount with ratchet • Bonnet fit hydraulic pruner • Foam pad back to prevent slippage Note: For longer base order 4531RC

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Canvas & Fiberglass

Fiberglass Accessories


Canvas & Fiberglass

Fiberglass Accessories

Model 4503B Order without Streamlight charger. 4503B comes with 4 barrel fasteners to mount your own recharger.

Model 4503 • 4.5" W x 10" L • Equipped with Streamlight base • Built in hanger to fit over 3 3/4" basket lip • Light sold separately • B2 Bumper is available

Model 4522M • Measures 9.5" W x 13" L • Built-in hanger to fit over 3 3/4" basket lip • Accepts most impact wrenches Stanley IW05, IW08, IW09 and IW04 Fairmont - 6500, 6505, 6505A and 8508 • B2 Bumper is available

Model 4514 - Chainsaw Scabbard • Designed to hold most chainsaws • 8.5" W x 33" L • Mounts outside or inside • Springs prevent falling off if mounted outside • Reinforced sides • B1 Bumper is available Replacement pocket, order Model 45141. Model 4514W - Chainsaw Scabbard With reinforced pocket for added durability of the chainsaw pocket.

Model 45502 - Fiberglass Bucket Step The Fiberglass Bucket Step provides the user ease in and out of the bucket. This unit will enable the user to step out of the bucket to other elevated work surfaces where work practices allow. Two 4" wide steps with a nonskid surface and leveling bumper make climbing safer and easier. Dimensions 12"W x 27 1/2"L Built-in bumper keeps step level.

Model 4550 - Fiberglass Step • Reinforced to support 300 lbs. • Ease stepping into and out of the basket • Small enough not to interfere when in basket – 24" long • B1 Bumper is available

A bumper is available to keep holders level. See page 83. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

86


Don't learn safety by accident. Climb Safe with Buckingham.


Fall Protection

Harnesses Buckingham Manufacturing offers a full array of standard design full body harnesses to be used in fall arrest, work positioning, suspension, retrieval and rappelling applications. Standard design harnesses are returnable and can be ordered in sizes S, M, L, & X. Buckingham Manufacturing allows you to design a harness from our matrix or to specify a non-standard size. We’ll manufacture the harness to accommodate your needs. Non standard harnesses and sizes are not returnable.

Harness Sizing Matrix

S = Small; M = Medium; L = Large, X = Extra Large; XX = 2X; XXX = 3X.

Economy Harnesses Our standard design Economy Harnesses are made from Type 13 (7000 lbs. nylon) nylon webbing with orange upper and black lower sections and meet all applicable ANSI and/or ASTM standards. Order by adding size S, M, L, X, to part number (except for universal harnesses). Non-standard sizes available upon request.

Model U64A23H6E00 ‘H’ Style Full Body Harness. • Interlocking buckles at the leg positions for height and leg strap length adjustment. • Fixed position interlocking chest strap buckle. • Steel Dee ring dorsal attachment. • Universal Size - One size fits most.

Model 6381700 ‘H’ Style Full Body Harness. No Metal, Light Weight • Hook and loop chest strap that meets ANSI Z359.1 requirements. • Reinforced web loop dorsal attachment used to half hitch a shock absorbing lanyard. • Step in leg straps. • No height or leg strap adjustment.

Model 63936E00T2 ‘H’ Style Full Body Harness • Interlocking buckles at the leg positions for height and leg strap length adjustment. • Hook and loop chest strap that meets ANSI Z359.1 requirements. • Interlocking leg strap buckles. • Steel Dee ring dorsal attachment. • Standard friction buckle for vertical adjustment.

Indicates meets ASTM F887 Electric Arc Performance Requirements. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

88


Harnesses

Basic Harnesses

603B3700-Web Dorsal Loop [shown] or 603B3600-Steel Dorsal Dee

‘X’ Style Full Body Harness

• Interlocking torso & leg strap buckles with leather chafes. • Web loop or steel dee dorsal attachment. • Reinforced web front loop that can be used for rescue or rope/cable grab. • Chest strap sewn above web loop to prevent spreading. • Made from Type 13 nylon webbing with orange upper & black lower sections.

6393700-Web Dorsal Loop [shown] or 6393600-Steel Dorsal Dee

‘H’ Style Full Body Harness

• Hook and loop chest strap that meets ANSI Z359.1 requirements. • Interlocking leg strap buckles with leather chafes. • Web loop or steel dee dorsal attachment. • Standard friction buckle for height adjustment. • Made from Type 13 nylon webbing with orange upper & black lower sections.

603E3700R3-Web Dorsal Loop [shown] 6383700-Web Dorsal Loop [shown] or 603E3600R3-Steel Dorsal Dee or 6383600-Steel Dorsal Dee

‘X’ Style Full Body Harness

• Interlocking torso & leg strap buckles. • Web loop or steel dee dorsal attachment. • Fully adjustable interlocking torso buckles for height adjustment. • Reinforced web front loop that can be used for rescue or rope/cable grab. • Made from Type 10 (R3) nylon webbing with red upper and black lower sections. • No chafes behind buckles.

6483600-Steel Dorsal Dee [shown] or 6483700-Web Dorsal Loop

‘H’ Style Full Body Harness

• Interlocking chest strap buckle with leather chafe. • Interlocking leg strap buckles with leather chafes. • Steel dee or web loop dorsal attachment. • Made from Type 13 nylon webbing with orange upper & black lower sections. • No vertical adjustment.

‘H’ style full body harness

• Hook and loop chest strap that meets ANSI Z359.1 requirements. • Interlocking leg strap buckles with leather chafes. • Web loop or steel dee dorsal attachment. • Made from Type 13 nylon webbing with orange upper & black lower sections. • No vertical adjustment because the harness has no metal above the waist.

6493500D1R3 Steel Chest Buckle [shown] or 6393500D1R3 Hook & Loop Chest Strap

‘H’ Style Full Body Harness

• Interlocking chest strap buckle or hook and loop chest strap. • 24" [61cm] dorsal pigtail with small dee ring. • Standard friction buckle for vertical height adjustment. • Made from Type 10 nylon (R3) webbing with red upper and black lower sections. • No chafes behind buckles. • Interlocking leg strap buckles.

Indicates meets ASTM F887 Electric Arc Performance Requirements.

89

Fall Protection

Our standard design Basic Harnesses are available in both ‘H’ & ‘X’ styles and have contrasting color upper and lower sections for easy donning. Harnesses meet all applicable ANSI and/or ASTM standards. Order by adding S, M, L, X, to part number. Non-standard sizes available upon request.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Fall Protection

Harnesses Basic Harnesses 6493600K-Steel Dorsal Dee [shown] or 6493700K-Web Dorsal Loop

Kevlar® ‘H’ Style Full Body Harness

• Interlocking chest strap & leg strap buckles, all with leather chafes. • Steel dee or web loop dorsal attachment. • Friction buckles mounted on vertical shoulder strap for height adjustment. • Made from Kevlar® with yellow upper and black lower sections.

High End Harnesses

6493700R3-Web Dorsal Loop [shown] 6494600-Steel Chest Buckle [shown] or 6493600R3-Steel Dorsal Dee or 6394600-Hook & Loop Chest Strap

‘H’ Style Full Body Harness

• Interlocking chest and leg strap buckles - no chafes behind buckles. • Web loop or steel dee dorsal attachment. • Friction buckles mounted on vertical shoulder strap for height adjustment. • Made from Type 10 (R3) nylon webbing with red upper and black lower sections.

‘H’ style full body harness

• Interlocking chest strap buckle or hook and loop chest strap. • Grommet & Tongue Buckle leg straps. • Steel dee dorsal attachment. • Friction buckles mounted on vertical shoulder strap for height adjustment. • Made from Type 13 nylon webbing with orange upper & black lower sections.

Our standard design High End Harnesses are available in both ‘H’ & ‘X’ styles and have contrasting color upper and lower sections for easy donning. They feature the Buckingham patented split tongue Quick Connect Buckle for ease of use and adjustability and they meet all applicable ANSI, ASTM & OSHA standards. Order by adding size S, M, L, X, to part number. Non-standard sizes available upon request. 603S8C700-Web Dorsal Loop [shown] or 603S8C600-Steel Dorsal Dee

6398C700-Web Dorsal Loop [shown] or 6398C600-Steel Dorsal Dee

‘X’ style full body harness

‘H’ style full body H arness

• Patented Quick Connect Buckles with leather chafes on the leg straps and at the torso for height adjustment. • Web loop or steel dee dorsal attachment. • Reinforced web front loop that can be used for rescue or rope/cable grab.

• Minimal amount of metal above the waist. • Hook and loop chest strap that meets ANSI Z359.1 requirements. • Leg straps with the patented Quick Connect Buckles and leather chafes. • Web loop or steel dee dorsal attachment. • Friction buckles mounted on vertical shoulder strap for height adjustment.

68D98C600-Steel Dorsal Dee [shown] or 68D98C700-Web Dorsal Loop

‘H’ Style Full Body Harness

• Patented Quick Connect Buckles with leather chafes on the chest and leg straps. • Steel dee or web loop dorsal attachment. • Friction buckles mounted on vertical shoulder strap for height adjustment.

Indicates meets ASTM F887 Electric Arc Performance Requirements. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

90


Indicates meets ASTM F887 Electric Arc Performance Requirements.

Harnesses

BuckFit & BuckFit FR Harnesses

Fall Protection

The standard design Buckfit harnesses are uniquely constructed for the user’s safety, comfort and ease of use. The full body harness slips on like a vest [‘H’ style] or pullover [‘X’ style]. No more twisted loops of webbing to untangle before you start your day! They meet all applicable ANSI standards and our Buckfit FR Harnesses have a Kevlar® mesh shell that meets the ASTM F887 Electric Arc performance requirements. Order by adding size S, M, L, X, to part number. Non-standard sizes available upon request.

603S8C700K1-Web Dorsal Loop [shown] 637G8C500CK1- FR w/ Dorsal Pigtail [shown] 68D7G8C600K1-Steel Dorsal Dee [shown] or 603S8C600K1-Steel Dorsal Dee or 637G8C500CV9- Non FR w/ Dorsal Pigtail or 68D7G8C700K1-Web Dorsal Loop

'X' Style Full Body Buckfit FR Harness:

'H' Style Full Body Buckfit FR Harness:

637G8C700K1-Web Dorsal Loop [shown] or 637G8C600K1-Steel Dorsal Dee

637G8C700V9-Web Dorsal Loop [shown] or 637G8C600V9-Steel Dorsal Dee

• A Kevlar® mesh shell that is designed to “breathe”. • Foam padded shoulder and leg pads for added overall comfort. • Patented Quick Connect Buckles with leather chafes on the leg straps and at the torso for adjustment • Web loop or steel dee dorsal attachment. • Reinforced web front loop can be used for rescue or with a rope/cable grab. • Made from Type 13 nylon webbing with silver upper and black lower sections.

'H' Style Full Body Buckfit FR Harness:

• A Kevlar® mesh shell that is designed to “breathe”. • Foam padded shoulder and leg pads that add to overall comfort. • Hook and loop chest strap that meets ANSI Z359.1 requirements. • Patented Quick Connect Buckles with leather chafes on the leg straps. • Web loop or steel dee dorsal attachment. • Spring loaded friction buckles for height adjustment. • Made from Type 13 nylon webbing with silver upper and black lower sections.

• A Kevlar® mesh shell that is designed to “breathe”. • Foam padded shoulder and leg pads for added overall comfort. • Hook and loop chest strap that meets ANSI Z359.1 requirement. • Patented Quick Connect Buckles with leather chafes on the leg straps. • 18" [45.7cm] dorsal pigtail with small dee ring to attach a 4 1/2' [1.37m] shock absorbing lanyard. • Spring loaded friction buckles for height adjustment. • Made from Type 13 nylon webbing with silver upper and black lower sections.

'H' Style Full Body Buckfit Harness:

• A Drilex® shell that is designed to wick moisture away from the user and padded Drilex® shoulder and leg pads for added overall comfort. • Hook and loop chest strap that meets ANSI Z359.1 requirements. • Patented Quick Connect Buckles with leather chafes on the leg straps. • Web loop or steel dee dorsal attachment. • Spring loaded friction buckles for height adjustment. • Made from Type 13 nylon webbing with silver upper and black lower sections.

91

'H' Style Full Body Buckfit FR Harness:

• A mesh shell that is designed to “breathe”. • FR foam padded shoulder and leg pads that add to overall comfort. • Patented Quick Connect Buckles with leather chafes on the chest and leg straps. • Steel dee or web loop dorsal attachment. • Spring loaded friction buckles for height adjustment. • Made from Type 13 nylon webbing with silver upper and black lower sections.

603S8C700V9-Web Dorsal Loop [shown] or 603S8C600V9-Steel Dorsal Dee

'X' Style Full Body Buckfit Harness:

• Drilex® shell, shoulder and leg pads that is designed to wick moisture away from the user and add comfort • Patented Quick Connect Buckles with leather chafes on the leg straps and at the torso for adjustment • Web loop or steel dee dorsal attachment. • A reinforced web front loop can be used for rescue or with a rope/cable grab. • Made from Type 13 nylon webbing with silver upper and black lower sections.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Fall Protection

Harnesses BuckFit Harnesses Continued 68D7G8C600V9-Steel Dorsal Dee [shown] or 68D7G8C700V9-Web Dorsal Loop 'H' Style Full Body Buckfit Harness • A Drilex® shell that is designed to wick moisture away from the user and padded Drilex® shoulder and leg pads for added overall comfort. • Patented Quick Connect Buckles with leather chafes on the chest and leg straps. • Steel dee or web loop dorsal attachment. • Spring loaded friction buckles for height adjustment. • Made from Type 13 nylon webbing with silver upper and black lower sections.

Miscellaneous Harnesses 603P8Q8 - Web Dorsal Dee 'X' Style Full Body Harness “X” style full body harness meets ASTM ARC performance test and ANSI Z359.1 requirements. Rather than have webbing cross to form an ‘X’, this harness has more of a ‘U’ shaped design that spreads the opening around the neck to eliminate the irritation of webbing against the neck. Harness features a nylon web loop at the sternum and dorsal attachment points, webbing and interlocking buckles to allow user to insert a body belt, patented quick connect buckles at the leg straps and front connection, and a 5000lb rated extra seat strap for use with the Buck-It restraint system.

68D98C74C0K4 - Web Dorsal Loop 'H' Style Full Body Harness The Buck Mini Back Pad harness offers comfort and ease in donning the harness. The unique shoulder pads are made from sateen fabric with fire resistant padding. Harness features back straps with male end aluminum interlocking buckles to connect to the Buck ErgoBelt, patented quick connect buckles at the chest strap and leg pads, vertical shoulder adjustment, and leather chafes behind the leg quick connect buckles for comfort and to reduce the potential of static charge. Harness features a 5000 lb rated nylon dorsal loop that eliminates metal and allows user to girth hitch their shock absorber (can be ordered with a dorsal dee).

Indicates meets ASTM F887 Electric Arc Performance Requirements. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

92


Harnesses Climb comfortably with Buck! Your back will Thank You!

Model 16906H1 - The Ergovation® H-Style Harness (shown with optional batten seat Model 1368) The Ergovation® 'H'-Style Harness accommodates dorsal fall arrest. It also has the ability to accommodate climbers utilizing Single Rope Technique (SRT) to access their work vertically. This 'H'-Style Harness is unmatched in comfort, durability and versatility. Features include: • ¼” closed cell foam padding for improved comfort and hygiene. • Pads are stitched to the harness webbing to prevent shifting and improve easy donning of harness. • Aluminum dee ring for decreased weight and increased comfort while aloft. • Plastic quick connect buckles to anchor and keep chest cam vertical and in tension while ascending. • Y2 friction buckles for quick and secure adjustment of webbing in front and in back. • Hook and loop chest retention strap for quick and easy donning of harness • By utilizing the harness the climber is able to decrease the strain on the low back region and disperse the weight of the harness, as well as the tools that the climber is using, throughout the entire upper body. Rated to 310lbs. Model 16906H2 - The Ergovation® Y-Style Harness (shown with SRT Model WES) The Ergovation® Y-Style Harness is a unique harness tailored specifically to users that require either dorsal or sternal fall arrest attachment. It also has the ability to accommodate individuals utilizing Single Rope Technique (SRT) to access their work vertically. This Y-Style Harness is unmatched in comfort, durability, and versatility. Features include: • ¼” closed cell foam padding for improved comfort and hygiene. • Pads are stitched to the harness webbing to prevent shifting and improve easy donning of harness. • Aluminum D-ring for decreased weight and increased comfort while aloft. • Y2 friction buckles for quick and secure adjustment of webbing in front and in back. • A one of a kind snap retention system to secure chest ascender to Y-Style Harness. • The only harness that accommodates both sternal and dorsal fall arrest, as well as a chest cam attachment for SRT access. • By utilizing the harness the climber is able to decrease the strain on the low back region and disperse the weight of the harness, as well as the tools that the climber is using, throughout the entire upper body. Rated to 310 lbs. Model WES - The Ergovation® Sigma Suspension SRT Attachment (shown above on 16906H1 & 16901H2) The Ergovation® Sigma Suspension SRT attachment is a revolutionary design that accommodates users that want a ventral attachment for vertical work. Once attached to the harness, the SRT’s two loops are used to anchor life support connecting links. The SRT attachment consists of a 1.75” web loop to create the attachment to the waist belt and two 1” adjustment straps and buckles that attach to the leg straps. Because the 1” red straps adjust the position of a user’s chest cam, and the height of the SRT attachment, it can be adjusted to support the climber’s lower back while keeping the climber upright on the rope. This positioning increases vertical gain and maintains vertical efficiency. The SRT attachment of the Ergovation® harness can be rigged two ways: for full time use by users that require a ventral attachment all of the time or for part time use for users that only require a ventral attachment for a portion of their work. Rated to 310 lbs.

93

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Fall Protection

Ergovation Harnesses


Fall Protection

Harnesses Harness Matrix

To order a harness to meet your specific needs, use the following procedure. Simply insert the digit noted to configure the harness you desire (note: harness always starts with a 6) 6

If prefix 'U' inserted universal fit. Only available with harness with upper body adjustment buckles.

X

CHEST STRAP ATTACHMENT

LEG STRAP ATTACHMENT

HARNESS TYPE

FALL ARREST ATTACHMENT

0 = None

0 = Used only with harness type 3

3 = Hook and Loop

Chest Strap

BODY BELT ATTACHMENT

3 = Cross-over design w/ perm. attach. chest strap located 3 3/4" above front 'X'. Applicable only to chest strap attachment 0

3S = #3B w/ quick connect buckles

1 = Step-in leg straps - no buckles

7G = Spring loaded 3 = Interlocking friction buckle on Buckle vertical shoulder straps

4 = Interlocking Buckle

5 = Permanently attached

5Q = Shock Absorber permanently attached

3B = #3 with loop

1 = Outside Mount 1" Plastic Buckles

4 = Body belt attached through means of loops attached to harness

SHOULDER PADS 0 = None

1 = Permanent

2 = Replaceable

at cross on front of harness

4B = Interlocking

Buckle black powder coated

8 = Basic Harness no shoulder strap adjustment

3A = Interlocking Buckle (black powder coated)

6 = Dee Ring (1069)

9 = Basic harness with shoulder strap adjustment

4 = Grommets

7 = Web loop

4C = Straps with Interlock buckles to connect Buck Ergo Harness. Buck Ergo Only

3D = #3 without

chest strap, with 1 3/4" nylon attach. pieces stitched across back shoulder straps directly below the chafe in back

8C = Quick Connect

Buckle w/ hook and loop for vertical adjustments

at cross on front of harness

Buckle w/ black belt chafes for vertical adjustment

4 = Light Weight Permanent 4Q = Body Belt Permanently attached

3E = #3D with loop

8D = Quick Connect

3 = Replaceable w/ 1" 4-ply nylon loop for snaphook and hook and loop to hold lanyard on shoulder (6JLV)

9A = Basic harness. #9 with black coated shoulder strap hardware

. 350 lb Rated

8C = Quick Connect Buckle

8E/ = # 3 FR Style Pad

Indicates meets ASTM F887 Electric Arc Performance Requirements. *Harnesses configured from the matrix are non-returnable. **8C=Quick Connect Buckle

8E = Quick Connect Buckle w/ dee ring

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

9 = Small shoulder dee ring

94


Harnesses

Fall Protection

Harness Matrix Options

A = 15" rappelling loop (seat section) - 1" yellow web with hook and loop back

A2 = 3" length rappelling loops on vertical shoulder straps. Only available on harness type 8.

A3 = 1½" diameter rappelling loops. Sewn to shoulder strap at 20° angle and encased in yellow tube wear piece. Not available on harness type 8.

A4 = 'A' rappelling loop with the addition of 3" wide elastic keeper.

C = 18" extension strap (1" yellow web) that terminates with a dee ring

C1 = Leather cover for adjustment buckles with 2" hook and loop.

C2 = 18" extension strap (1¾" orange web) terminating with a small dee ring.

C4 = 1¾" orange web cross piece to prevent fall arrest attachment from sliding down.

D1 = 24" extension strap (1" yellow web) terminating with dee ring

E = Left side only E1 = right side only 1¾" diameter loop (1" 4-ply nylon) in hip area to attach snap hook. For both sides use EE

F = Work positioning dee rings attached to harness by green web, which goes around the back and connects to two dee rings.

G = 18" extension strap (1" yellow web) that terminates with ¾" diameter loop for carabiner.

G1 = 18" extension strap (1" yellow web) with a loop (approx. 3" dia.) to half hitch on a shock absorber.

G3 = 18" extension strap (1¾" orange web) with wear piece around 3½" diameter loop for attachment of shock absorber.

G4 = 18" extension strap (1¾" orange web) that terminates with a 1¾" diameter loop encased in yellow wear piece.

G6 = 18" extension strap (1¾" orange web) that terminates with a small dee ring attached in a 1¾" diameter loop encased in yellow tube wear piece.

Indicates meets ASTM F887 Electric Arc Performance Requirements.

95

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Fall Protection

Harnesses Harness Matrix Options

H = Reflective material

H1 = 10" Reflective strips stitched to front and back shoulder straps. Hook and loop chest strap.

K1 = Kevlar mesh; meets ASTM F887 electric arc performance requirements.

K4 = FR Mini BuckFit style back pad. K3 = FR Mini BuckFit style back pad and leg pads

N = 2" diameter loops on 1" black web stitched to both shoulder straps 5" above the hook and loop chest strap adjustment buckles.

N1 = Chafe loop attached to left shoulder strap and used to attach snap hook.

N8 = 1 Âź" diameter loop PVC black belting stitched to both shoulder straps.

P = Shoulder Dee Ring for retrieval

R3 = Type X red upper section, black lower section. No chafes under buckles.

T2 = Harness made without leg strap elastic bands and leather chafes and with 2" plastic slide buckles.

T3 = Harness made without leg strap leather chafe and with 2" plastic slide buckle.

T7 = 3" diameter loop with 1" yellow web with a yellow fluorescent reflective strip on each shoulder for retrieval.

V9 = Cool Max padded shell and leg pads green with gray type 13 webbing

Z12 = 5 labels inside leather cover with hook and loop wrap (wallet style)

standard gray

T8 = 3" diameter loop with 1" yellow web with a yellow fluorescent reflective strip on the side of each hip.

buckfit harnesses only

T9 = Harness manufactured without leather chafes behind hardware but with elastic bands.

Indicates meets ASTM F887 Electric Arc Performance Requirements. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

96


Shock Absorbing Lanyards

What's Changed with Consensus Standards

for Shock Absorbing Lanyards • ARC Test (40 cal) Requirement ASTM - To stamp ASTM must also meet ANSI Z359.13 • ANSI Z359.12 - Requires a 3600lb Gate on snaps and carabiners • ANSI Z359.13 - Offers 2 Shock Absorbers: - 6' Length for a 6' drop, maximum deceleration 48", arresting force is less than 900 lbs. - 6' Length for a 12' drop, maximum deceleration 60", arresting force is less than 1350 lbs.

How To Order To get desired shock absorber please add correct suffix to the part number: ASTM 40 cal (Must also meet ANSI Z359.13)

ANSI Z359.12 3600 lb. Gate

X

X

X

X

ANSI Z359.13 Suffix to add to Model 6' | 12' X X

Example Buck Yard

S1X6

8VV116S1X6

S1X12

8VV116S1X12

Rule of Thumb New Rule of Thumb

Harness Dorsal Attachment

Maximum Lanyard Length

Steel Dee Ring

6' (1.8 m)

Web Loop

6' (1.8 m)

18" Pigtail

4 1/2' (1.4 m)

24" Pigtail

4' (1.2 m)

Old Rule of Thumb

Note: The length of deployment on the shock absorber will vary depending on the anchor, length of fall, and the user’s weight. If connected to a solid anchor such as an I-Beam the user will experience a greater deployment distance. When the same person is connected to an anchor on the bucket truck and the boom is not straight up and down, the shock absorber may deploy very little due to the flex in the boom. If the boom is straight up and down the shock absorber will deploy a greater distance.

Not Recommended To USE A LOCKING SNAP HOOK WITH A FULL BODY HARNESS DORSAL WEB LOOP! When using a full body harness with a steel dee ring dorsal attachment, only use a shock absorbing lanyard with a locking snap hook or a locking carabiner connector.

97

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Fall Protection

Buckingham Manufacturing offers four different styles of shock absorbing lanyards. Standard design shock absorbing lanyards are returnable and can be ordered in 4', 4 1/2' and 6' lengths. Buckingham Manufacturing also allows you to design a shock absorbing lanyard from our matrix, specifying connection options and lengths. We’ll manufacture the shock absorbing lanyard to accommodate your needs. Matrix designed shock absorbing lanyards are not considered standard design and are not returnable.


Fall Protection

Shock Absorbing Lanyards

Buckyard

The Buckyard has the flexibility of a standard web or rope lanyard with the benefit of a reduced arresting force. The tubular nylon exterior may expand 42" maximum while the interior material stretches to reduce the arresting force to less than 900 lbs. The Buckyard is available in 4', 4 1/2' and 6' non-adjustable lengths. When ordering an arc tested (Meets ASTM F887) BuckYard, add the 'S1' suffix to the model number; e.g.: 84V116S1. The +Z Suffix indicates all hardware has 3600 lb. gate and meets ANSI Z359.12-2009.

8VV116S1+Z 84V114+Z

BuckYard Stretch The Buckyard Stretch offers the same benefits as the Buckyard with the addition of elastic Bungee. This feature reduces a 6' lanyard to approximately 44" greatly reducing trip hazards while climbing in and out of an aerial basket. The Buckyard Stretch is available in 4, 4 1/2 ft. and 6 ft. non-adjustable lengths. When ordering an arc tested (Meets ASTM F887) BuckYard Stretch, add the 'S1' suffix to the model number; e.g.: 84V716S1. The +Z Suffix indicates all hardware has 3600 lb. gate and meets ANSI Z359.12-2009.

8VV714.5+Z

84V714.5+Z

Indicates hardware meets ANSI Z359.12-2009 Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Indicates meets ASTM F887 Electric Arc Performance Requirements.

98


Shock Absorbing Lanyards The Buck Arrest features a 16" shock pack covered by a water resistant nylon tube that reduces the bulkiness of the pack on the back. When ordering an arc tested (Meets ASTM F887) Buck Arrest add the ‘S2’ suffix to the model number; eg: 64V114S2+Z. The +Z Suffix indicates all hardware has 3600 lb. gate and meets ANSI Z359.12-2009.

64V114+Z

6VV114+Z

6VV126+Z

Fall Protection

Buck Arrest

Buck Stop The Buck Stop features a 6" shock pack covered by clear shrink tube making inspection easy. When ordering an arc tested (Meets ASTM F887) Buck Stop, add the 'S1' suffix to the model #; e.g.: 54V116S1. The +Z Suffix indicates all hardware has 3600 lb. gate and meets ANSI Z359.12-2009.

54V114+Z

5VV114+Z

5VV126+Z

5VV116S1+Z

Indicates hardware meets ANSI Z359.12-2009

Indicates meets ASTM F887 Electric Arc Performance Requirements.

99

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Fall Protection

Dual, Specialty & Tie Back Shock Absorbing Lanyards Buckingham Manufacturing offers a wide variety of dual and tie back shock absorbing lanyards for 100% fall protection while climbing and working on transmission towers, cell towers and steel structures. Suffix +Z indicates the hardware meets ANSI Z359.12-2009.

Dual & Specialty Shock Absorbing Lanyards

Model 8+66716D+JW4 Dual Shock Absorbing Lanyard Weighs in at just 3 lbs. and features lightweight aluminum hardware. The auto locking 2” offset gate and double locking aluminum snap help keep weight to a minimum. A stretch core automatically contracts lanyard length preventing it from becoming tangled when not in use and while climbing.

Model 8+66716D+J+6W4 Dual Shock Absorbing Lanyard Features an aluminum double locking rope snap piggybacked with large auto locking carabiners so that users can tie off to step bolts.

Model 546716RD+H+Z Buck Stop Dual Lanyard Features two 30342 Large Locking Rebar Hooks that have a 3 11/32" gate opening. Red rescue loops facilitate the rescue of an injured worker.

Model 546716RDR+Z Buck Stop Dual Lanyard Features two 3130 Locking Ladder Snaps that have a 2 1/2" gate opening. Red rescue loops facilitate the rescue of an injured worker.

+T - N 3618 Tie Back Snap with 3600 lb. gate.

Model 5V+T7A16X6 - Buck Stop Tie Back Lanyard The Buck Stop Tie Back Shock Absorbing Lanyard features a specially designed snap hook making it safe and easy to ‘tie back’ to itself. Lanyard is made with 1” inch wide polyester web with a red warning center to alert the user of excessive wear and is protected by an outer web sleeve for added safety. A 17061 snap hook is used to attach to the users harness dorsal dee ring.

Work Positioning Lanyards & Straps

Model 9+N08K15A2M4 Lightweight Work Positioning Lanyard This lightweight work positioning lanyard features a micro adjuster for ease of use. A double locking aluminum snap hook is used to keep the overall weight under 2 lbs. A protective sleeve is included to protect the rope from excessive wear. Overall length is 5’ [1.5m]. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Model 7VV7A13B+4 - Rebar Assembly Features polyester webbing and easy to use 1706 locking snaphooks. The locking rebar snap has a 2 1/4” gate opening. The 1” polyester webbing has a red warning center to indicate excessive wear or cuts, and is encased in a nylon tube to protect against abrasion (36” length). Please indicate desired length when ordering. Indicates hardware meets ANSI Z359.12-2009 standard.

100


Lanyards

DECELERATOR/WORK POSITIONING 5-BUCK STOP 6-BUCK ARREST 7-WORK POSITIONING LANYARD 8-BUCK YARD

Fall Protection

Matrix for Shock Absorbing / Work Positioning Lanyards A B C D E F (Hardware for both Ends Except Items with (*) for End #2 Only) HARDWARE (END MATERIAL HARDWARE (END #1 ATTACHED TO WEB/ROPE #2 ATTACHED TO USER) ANCHOR) 1 = 1" Yellow 0 = 3/4" eye for M = Permanently polyester web; 5,6, carabiner Attached Loop 7 Series Only 4 = Standard Half-hitch loop 6 = 3" Nylon Loop Dual Lanyards Only +4 = 2 1/4" locking ladder snap 30351 or when used w/ option +Z, a 30351 w/ 3600lb gateload +6 = Aluminum Body Locking Rope Snap +7 = 1709 Rope Snap or when used w/ option +Z, a1712 w/ 3600lb gateload +J = 2" offset carabiner* 8 = 1704 Swivel snap A = Aluminum Carabiner SelfLocking 5005S3

R = 2 1/2" Ladder Hook 3130 or when used w/ option +Z, a 31301 w/ 3600lb gateload

x x FIXED OR OVERALL LENGTH ADJUSTABLE 4 = 4' 1 = Fixed 4.5 = 4 1/2' 2 = Adjustable 5 = 5'

1 = 1 3/16" Green Nylon tube; 8 Series Only

OPTIONS D = Dual Lanyard R = Rescue Loop

S1 = Shrink Tube Over Arc Flash Rated Label. Used on Arc Flash Approved Products.

6 = 6'

3B = 5/8" Polyester V = 1706 Snap or when 3 Strand Rope used w/ option +Z, a 17061 w/ 3600lb gateload 4 = 1/2" Multiline Rope (3 Strand) Z = 1 3/4" Ladder Hook Model 3129* 4A = 5/8' Multiline +H = Model 30342 Rope (3 Strand) Large Locking Rebar Hook 4B = 3/4" Multiline Rope (3 Strand) +K = Model 1711 Roto Snap 7 = Green Nylon Tube w/ elastic +N = Model 1710 core; 5,6 & 8 Aluminum Locking Series Only Snap

S2 = Arc Flash Rated Cover for Buck Arrest

+T = N 3618 Tie Back Snap 7A = #1 with nylon tube 3600lb gateload 8A = 1/2" Blue +W = 1714 Locking Rope Streak Rope Snap, 3600lb side and gate load 8G = 5/8" Double Braid Rope

X12 = Meets ANSI-Z359.13-09 for 12' FF

D = 50051, 3600 lb. Gate Steel Carabiner

V = Hook and Loop Sewn at Anchor End of Lanyard W = Leather Wear Guard W5 = Clear Plastic Tube Wear Guard X6 = Meets ANSI-Z359.13-09 for 6' FF

+Z = Hardware meets Z359.12-09 (3600 lbs gate)

A

8K = 1/2" XTC 16 Strand Rope w/ Red Warning Core

D

C

F

B

E - desired length

Hardware Used with Lanyards

(Illustrated Model 64V126R)

See following page for carabiner options 17051

17051 (Option L) Locking Rope Snap [1" (25mm) eye (I.D.), .583",(15mm) opening (keeper to bill in open position), 5.75" (146mm) length, 12.6 oz. weight. Rated to 5000 lbf. (22kn) or when using suffix +Z in part number, Model 17051 Locking Rope Snap (not shown) with a 3600 lb gate load. 30351

30351 (Option +4); Locking Ladder Snap: 1" (25mm) eye (I.D.), 2.5" (64mm) opening, 9.5" (241mm) length, 1 lb. 7 oz. weigh. Rated to 5000 lbs. (22kn) or when using suffix +Z in part number, Model 30351 Locking Rope Snap with a 3600 lb gate load.

31301

1706

1706 (Option V); Locking Rope Snap: 1" (25mm) eye, 15/16" opening, 6" (152mm) long. Rated to 5000 lbf. (22kn) or when using suffix +Z in part number, Model 17061 Locking Rope Snap with a 3600 lb gate load 1712

1712 (Option +7); Locking Rope Snap [1" (25mm) eye (I.D.), 3/4" (19mm) opening, 6 1/8" (156mm) length, 10.2 oz. (290gm) weight. Min. tensile strength 5000 lbs. (22kn)] or, when using suffix +Z in part number, model 1712 Locking Rope Snap with a 3600 lb gate load.

31301 (Option R); Large Locking Ladder Snap: 1" (25mm) eye (I.D.), 2.5" (63.5mm) opening, 9 3/4" (248mm) length, 1 lb. 8 oz. weight. Rated to 5000 lbf. (22kn) or when using suffix +Z in part number, Model 31301 Locking Ladder Snap with a 3600 lb gate load. 30342

1711

1711 (Option +K); Alloy Steel Roto Snap: .670" (17mm) gate opening, 5 3/16" (132mm) long, 11.2 oz. Min. tensile strength 10,000 lbs. and min. gate/side load 5000 lbs.

101

30342 (Option +H); Large Locking Snap Hook: 15/16" (24mm) eye (I.D.), 3 11/32" (85mm) opening, 13" (330mm) length. Rated to 5000 lbs.

Indicates hardware meets ANSI Z359.12-2009 standard.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Fall Protection

Lanyards

Carabiners

3600 lb. Gate Triple Action - Meets ANSI Z359.12-2009

3600 lb. Gate Double Action - Meets ANSI Z359.12-2009

1711 (Option +K); Alloy Steel Roto Snap:.670" (17mm) gate opening, 5 3/16" (132mm) long, 11.2 oz. Min. tensile strength 10,000 lbs. and min. gate/side load 5000 lbs

5005L1 (Option +3) Steel Twist Lock Carabiner Length – 7 5/8" (193.68mm)

5555S2 Aluminum Carabiner w/ 3600 lb gate Length – 4.80" (122 mm) Opening – .78" (20 mm)

Opening – 2 1/8" (53.98mm) Breaking Strength – 9,220 lbs. (40kn)

5555S3 (Option A) Aluminum Carabiner w/ 3600 lb gate Length – 4. 7/8" (123.83 mm) Opening – 3/4" (19.05 mm) Breaking Strength – 6744 lbs. (30 kn.)

Breaking Strength – 6,730 lbs. (30 kN.)

50051 (Option D) Auto Lock Steel Carabiner w/ 3600 rated gate keeper Length –4.88" (124mm) Opening – .94 (24mm) Breaking Strength 9,217 lbs (41 KN)

Non 3600 lb Gate Triple Action

5555SA Ball Lock Aluminum Carabiner (Option +2) Length – 4 5/8" (117.48 mm) Opening – 1" (25.4 mm) Breaking Strength – 6,295 lbs. (28 kn.)

5555WSA William Ball Lock Aluminum Carabiner Length – 4 5/8" (117.48mm) Opening – 1 1/8" (28.58mm)

Breaking Strength – 5,625 lbs. (25kn)

5555S1 AM'D Aluminum Carabiner Length – 4 3/8" (111.13 mm)

5555W1 Tri-Act Carabiner Length – 4 5/8" (117.48mm) Opening – 1 1/8" (28.58mm)

Opening – 7/8" (22.23 mm) Breaking Strength – 6,295 lbs. (28 kn.)

Breaking Strength – 5,625 lbs. (25kn)

Opening – .94" (24mm) Breaking Strength – 51 (kN)

Opening – 1 1/16" (26.99mm) Breaking Strength – 6,747 lbs. (30kn)

Non Man Rated

Miscellaneous

5005T Twist Lock Steel Carabiner Length – 4.38" (111.3 mm)

5005K Steel Auto Lock Carabiner Length – 4 1/2" (114.3mm)

5005L2 Steel Twist Lock Carabiner Length – 7" [177.8mm] Opening – 1 3/8" [34.93mm] Breaking Strength – 10,120 lbs. (70 kn)

5005M Screw Gate Steel Carabiner* Length – 4 1/2" (114.3mm) Opening – 1 1/8" (28.58mm) Breaking Strength – 11,240 lbs. (50kN) *WARNING: NOT INTENDED FOR HUMAN SUPPORT OR FALL PROTECTION

Indicates Hardware meets ANSI Z359.12-2009 standard.

Retractable Lanyards The retractable lanyard, rated to 310 lbs., automatically extends and retracts to allow user mobility. This unit utilizes an inertia-brake mechanism which locks when 5" of material pulls out per second to restrain the worker to a fall of less than 12". Meets all applicable ANSI standards. C

B

Model 5008-83EV

D

5008-80+1V

Retractable Lanyard For use in an aerial lift truck. Attaches directly to boom.

A - desired length 5008

A

B

C

D

RETRACTABLE UNIT

LENGTH IN FEET 6'

SWIVEL

CONNECTING DEVICE FRAME END

CONNECTING DEVICE LANYARD END

5008-83RV

8' 10'

0 = None 3 = 5/16 Swivel w/ Bolt & Nut

5008-103EV

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

102

(Hardware for both ends except when noted) F = 1 3/4" ret. lanyard bracket (frame end only) 0 = 1" dia. Integral loop with wear piece Z = 3129 ladder hook 1 3/4" +6 = Locking Rope Snap, aluminum body - stamped

V = 1706 locking snap or when used with option +Z, a 17061 with 3600 lb gateload +N = Attac carabiner 223516 Suffix +Z = Indicates hardware meets Z359.1 (3600 lbs gate)

OPTIONAL OPTIONS A1 - Rubber boot for carabiner K = Signifies Buck Stop pack only attached to lanyard end


Personal Fall Limiters

ne

w

• Aluminum Alloy Construction Inside & Out: both the mechanism and housing made of corrosion resistant alloy. • Tangle free swivel top for added mobility. • 7' extension for expanded work area • Dyneema® polymer fiber 1" webbing - up to 15x stronger than steel. Resistant to moisture, abrasions, UV light and chemicals. RETRACTABLE UNIT

LENGTH IN FEET

SWIVEL

• A braking system designed for smooth consistent operation to prevent "jerky" lock-ups. • No factory recertification required. •Retractable unit (no hardware) only weighs 1.9lbs • Rated to 350 lbs. • Dual BuckLimiters offer continuous 100% fall protection (not for multiple user connection)

Connecting Device (Swivel End) *

Connecting Device (Web End)*

7'

D = P/N 50051 Steel Carabiner w/ 3600 lb. gate

6008 = Single PFL 6008K = For Kevlar to meet ASTM F887 Sections: 23.8.1, 23.8.2, & 23.8.3

OPTIONS C = Red 1' tube wear piece 22" long working length (26" cut length)

4 = Swivel Built In

+Y = Triple Lock Aluminum Carabiner (3600 lbs. gate)

+4 = 2 1/4" locking snap 3035 or when used w/ option +Z , a 30351 w/ 3600 lb. gateload

D = P/N 50051 Steel Carabiner w/ 3600 lb. gate

P = Conlour Foam Pad with two adjustable straps and two elastic straps W4 = Manufactured with deployment label. To deploy @ 600lbs.

D6008 = Dual PFL

V = 1706 snap or when used w/ option +Z, a 17061 w/ 3600 lb. gateload.

+T = N 3618 Tie Back Snap, 3600 lb side & gate load compatible

+Y = Triple Lock Aluminum Carabiner (3600 lbs gate) +Z = All hardware on lanyard meets Z359.12 2009, 3600 lb requirements * Load capacity = 350 lbs.

6008-74DV+Z

6008-74D+4+Z

6008-74+YV+Z

6008-74+Y+Y+Z

6008-74D+4+Z Attached to a BuckFit harness

6008-74+Y+4+Z

Model 6008-74+Y+TC+Z - Tie Back BuckLimiter Features a specifically designed flat bill snap which allows webbing to lay flat.

Model D6008Q1 Dual BuckLimiter

103

Model D6008-74+Y+Z Dual BuckLimiter

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Fall Protection

BuckLimiter


Fall Protection

Rope / Cable Grabs & Vertical Lifelines & Anchor Slings Rope & Cable Grabs Model 5004T - Rope Grab This Rope Grab is made to fit 5/8” - 3/4” rope. The grab is made of high quality aluminum alloy with dual cams for better braking. This grab will move freely up and down until a fall occurs. Model 5004K for use on 1/2" - 5/8" rope.

Model 5004 - Stainless Steel 5/8” Rope Grab Moves freely up and down until a fall occurs. The downward pull will stop the fall by locking the CAM to the rope.

Model 5004F - 5/8" Rope Grab Moves up and down the rope with user until a fall happens, then it locks to the rope. This rope grab also has the added feature of a park brake, so the user can lock the grab above their head while working to minimize the fall distance.

Model 3032L - Spreader Snap Easy to use locking spreader snap. Overall Length - 9 3/4" Eye Diameter - 1" Rated to 5000 lbs.

Model 5013 - Cable Grab This Cable Grab is designed to work on 3/8” cable. Should the user fall while ascending or descending, the cable grab will lock onto the cable preventing the user from falling more than one foot. Model 5012 for use on 5/16" cable.

Vertical Lifelines Anchor Slings

Model 7V-4A150+Z - Lifeline 5/8" diameter 3 strand vertical lifeline with a 17061 locking snap hook that meets ANSI Z359.12-09 3600 lb. gate requirements. A blended polyester/ polyolefin rope is used to provide maximum life. Model 7V-4A1100+Z: 100' Lifeline

Model 39SQ1-150 Lifeline 1/2" Kernmantle lifeline features a stitched end with steel thimble.

Model 4888-40 - Lifeline 3/8" eye to eye wire sling, 5/8" metal thimble with a 40' spliced 5/8" Tenex rope with dual whipping twine, 80lbs. each, and a locked brummell splice. Available in different lengths.

Model 7V-8G150+Z - Lifeline 5/8" diameter 16 strand double braided rope vertical lifeline with a 17061 locking snap hook that meets ANSI Z359.12-09 3600 lb. gate requirements. This is a high strength, low stretch lifeline that is Samthane coated to resist wear. Model 7V-8G1100+Z: 100' Lifeline

Model 3902-6 - Temporary Anchor Rated to 5000 lb. A sling that utilizes a small dee to pass through a larger dee making a secure anchor. Overall length is 72". (Available in any length; e.g. to order a 4' length use model number 3902-4).

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

104

Model 3901 - Temporary Anchor Rated to 5000 lb. A sling that allows user to make a half hitch around a secure anchor. Overall length is 72". (Available in any length; e.g. to order a 5' length use model number 3901-5).


Retractable Lifelines & Suspension Systems Model 5201-50 - Retractable Lifeline Retractable lifelines are ideal for persons susceptible to a slip or fall from elevated heights. Should the user fall, a centrifugal braking mechanism engages to limit the free fall to less than two feet (.6 m). The simple rules of fall protection requires a suitable anchor, a connection device such as a retractable lifeline and a full body harness. Shock absorbers should always be used to protect the user and reduce force applied to the anchor point. Rated at 350 lbs. Model 5201-25 25 ft. (7.6 m) of galvanized cable Model 5201-50 50 ft. (15.2 m) of galvanized cable Model 5201-100 100 ft. (30.4) of galvanized cable

new

Model 6007-164DV+Z Lightweight 16' Webbing Retractable Lifeline Lightweight Retractable lanyard features a light yet rugged composite housing. Housing swivels to minimizing twisting during use. Meets ANSI Z359.14. Weighs 4.6lbs.

Note: If Kevlar desired add suffix 'K', example 5201K-25. If stainless desired add suffix 'S' example 5201S-25. For steel stamped housing model add suffix 'SH' to the model

Indicates hardware meets ANSI Z359.12-2009 standard.

Bosun's Chair Model 1305 - Bosuns Chair A sturdy 1" x 12" x 24" (25 x 30 x 61 cm) bosun's chair, utilizing plywood with metal cleats on the underside for reinforcement. The body support harness is constructed of 1 3/4" (44.5 mm) nylon web that weaves through the seat in four corners to a single dee ring to assure the user support and balance. The waist belt fastens around the user's waist using a tongue buckle and grommeted holes. Attached to the center of the waist belt is a 5000 lb. (22 kn) rated dee ring used to secure to an independent lifeline. Meets OSHA 1910.28.

Rigging Blocks Model 5007S & 5007L Aluminum Rigging Blocks These rigging blocks from Buckingham combine the convenience of a spring loaded upper pin with a captive bushing, and a lightweight aluminum design. Simply push and twist the upper pin, and the checkplates will swing open. And best of all, the bushing and pin can not fall out of the block. Stainless steel sheave and bushing pins, with an epoxy polyester coating over aluminum make up the construction of this high quality rigging block. Available for 5/8" and 3/4" rigging lines.

105

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Fall Protection

Retractable Lifelines


Fall Protection

Harness Beams Buck Trainer

Model 5204 - Buck Trainer The Buck Trainer is a reliable apprentice fall protection 5000 lb. anchor that rotates 250°. It can be attached to any pole up to a 9" diameter at any height by a qualified climber and a groundman. This unit is ideal to transport to remote areas to field test potential apprentices before sending them to the actual training facility.

All parts included to secure to Pole • Ratchet strap to lift Buck Trainer with handline • Bolts and nuts • Mounting brackets • Carabiner to mount lifeline Retractable Lifeline sold separately.

Benefits and specifications of the Buck Trainer: • Fits a pole with diameter up to 9" • Mounts anywhere on pole • Rotates 250° • Keeps climber 36" from pole • Tested to 5000 lbs.

Harness Beam Model 5203 - Harness Beam The answer to OSHA 1910.269 when training (unqualified) wood pole climbers. • Full 360° Ball Bearing rotation for traditional climber training • Provides a 5400 lb. anchor point (OSHA 29CFR 1910.269) • Requires no pole drilling • Weighs approximately 160 lbs. • Adjustable to fit over a max. 9.5" diameter pole top* • 36" Arm length (Center pole to arm end) • Center lifting eye • Limits arresting force to less than 900 lbs. when used in conjunction with a quality retractable lifeline and full body harness • Installation on a 45' class 3 pole takes less than 10 minutes • Eight bolts to secure to pole *To fit poles with a 12" diameter top order Model 5203-12.

Model 5203

Model 52032 - Dual harness beam - two trainees are fall protected.

New Feature - Leveling footpads Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

106


Rescue Systems

Co

mp

Fall Protection

Self Rescue System

ac

t!

new Model 301SR - Self Rescue System This New Self Rescue System features a new lightweight, compact design. The lightweight descender is manufactured from aircraft grade aluminum and features an anti panic release brake which will stop the descender if the user releases or compresses the descender all the way. The TVAC descent line measures 6.8mm and is compact and stands up to heat on long descents. System is packed in a weather resistant nylon bag with a mesh bottom to let moisture escape. Comes with two rappelling straps. Model 301SR-50 for 50' Model 301SR-75 for 75 Model 301SR-100 for 100' Custom lengths available upon request. Rated to 300 lbs.

Model 101SR - Self Rescue System The Buckingham 101SR provides all the components required to self-rescue or if the need arises to rescue a fellow employee. The 101SR descender will automatically stop the user until the user compresses the handle allowing a smooth controlled descent. An additional built in (anti-panic) safety feature stops descent if the user compresses the handle too hard. This unit will allow the rescuer the advantage of lowering a hurt person with ease as well. The 101SR kit comes with retrofit rappelling straps that can be added to an existing harness for self-rescue. 101SR-50 (50' 1/2" braided rope) 101SR-75 (75' 1/2" braided rope) 101SR-100 (100' 1/2" braided rope) Order Option W (101SRW) for Water Resistant Packing All components Vacuumed Sealed 4563 Bag only Custom lengths available and packed in a back pack rope bag. Rated to 330 lbs.

After Fall Self Rescue System Model 102SR & 102SRS - After Fall Self Rescue System An employee working alone subjected to a fall from a bucket truck could be suspended for hours if no assistance is available. With the 102SR or 102SRS, the victim subjected to a fall can easily climb back into the basket, reducing the risk of suspension trauma. When the person falls, the 102SR systems deploys a 15' webbed ladder allowing them to ascend back to the bucket and safety.

Model 102SR A longer pack that mounts to the bucket truck boom.

Model 102SRS A short pack that connects to an anchor point and hangs freely.

107

Steps spaced 8" apart and stiffeners are built in to ease inserting foot.

To ascend the user climbs up the built-in steps.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Fall Protection

Rescue Systems After Fall Self Rescue System

Model 106-50 - Self Rescue System Provides the means to safely and easily descend to the ground in the event of a fall from the bucket or need to evacuate an inoperable bucket. Ideal for the 'One Man Crew', this system combines a specially designed bag that, when deployed, releases a ladder [to relieve pressure], an ascender, descender and 50' of rope. Longer lengths are available upon request. Rated to 330 lbs.

After fall victim pulls components from bag and attaches descender to rappelling loops on harness

Victim then steps up into ladder and disconnects shock absorbing lanyard.

Then descends safely to the ground.

Dual Self Rescue System Model 3813D1Q4-95 Combination Hurtman/High Elevation Self Rescue System This kit provides all the components needed to remove an injured co-worker from the bottom of an aerial basket and will also allow someone who is stranded in an aerial basket to safely and easily descend to the ground. Kit contains stainless steel blocks with a 5 to 1 lifting ratio, 95' of a 1/2" braided rope, boom strap with dee ring, descending device with built in anti-panic feature and retrofit rappelling straps. Locking snap hooks and carabiner feature ANSI Z359 3600 lb. rated gates. Packed in a 6" diameter by 26" tall containment bag. Rated to 330 lbs.

Model 7003S Dual Rescue Strap Rescuing an injured coworker has never been easier. The Dual Rescue Strap from Buckingham enables the user to safely and easily rescue a coworker from an elevated position using our 101SR Self-Rescue System. The newly redesigned strap requires only one carabiner and keeps the descent device closer to the user for better control.

Model 4469B1-150 - Back Pack Rope Bag Back Pack Rope Bag makes carrying the high elevation system aloft easy. Padded shoulder straps and a chest strap to keep shoulder straps in place while climbing. Three outside mesh pockets with hook and loop closures. Includes quick adjust friction buckles, elastic strap retainers, fairlead drawstring closure system, poly battens and a carry handle. Available in 120', 150',200, 225' and 300' models. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

108


Rescue Systems

Model 3816 - Tower Rescue Blocks Designed specifically for the wireless telecommunication industry, this kit is designed to easily lift a victim on a tower or structure to disconnect their shock absorbing lanyard. A 4 to 1 mechanical advantage eases the process. Includes an anchor sling and micro grab to anchor to a lifeline. Packed in a compact storage bag that can be easily attached to a harness or belt. 10' lifting height.

Buck Diaper Model 81 - Buck Diaper Designed to be used for a victim that needs to be lowered from a high elevation. The Buck Diaper provides a secure, easy method to transport the victim.

Hurt Man Bucket Truck Basket Removal Should a fellow employee experience an accident where they fall to the bottom of the basket floor, removing them without a mechanical advantage can be near impossible. The Model 3813, with the stainless steel block and tackle provides a lifting ratio of 5 to 1 with 95' of double braid, 11 mm rope. Since harnesses are predominately used in bucket trucks, the ability to lift the victim higher is a must to clear the top of the basket. Buckingham has addressed this by a higher mount on the boom and a lower cord to deploy and activate the block and tackle system. Model 3813 Unit designed to stay on boom at all times. Non-slip adhesive rubber to prevent slippage.

Model 3813D1 Boom strap with dee ring stays on boom. Rescue blocks are stored in a compartment of the line truck.

109

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Fall Protection

Tower Rescue Blocks


Fall Protection

Figure 8 Rescue Straps

Model 5009-36

Rescue Systems Rescue Procedure:

Model 5009E-36

Rescue Figure 8 straps are designed to be girth hitched on a structure to aid in a rescue of an injured victim. The strap is 36" long and made from 1" yellow webbing. The Figure 8 is made from aluminum and can either be ordered without ears (model 5009-36), or with ears (model 5009E-36) to prevent rope from slipping down and knotting at the bottom of the Figure 8.

Model 4579 Canvas

Model 4578 Leather

Model 5009E-36 Model 5009E-36 shown tied to a Shown girth hitched on a structure. victim's shock absorbing lanyard.

Should a worker fall, the rescuer has everything they need to lower the victim to the ground safely. • The rescuer would rig the handline through the Figure 8 already secured to the structure [see photo above]. • The rescuer would then attach the handline to the victim's shock absorbing lanyard loop. • The rescuer would then cut the red rescue loop on the shock absorbing lanyard and lower the victim to the ground.

Model 4579 / 4578 Rescue Pouch The Rescue Pouch is designed to store a knife and a Figure 8 with strap in the front pocket. The main section of the pouch would be used to store tools and miscellaneous nuts and bolts.

Rescue Buck

BuckStep

Model 105RS - BuckStep System Designed 3.) Step into to alleviate sling with both feet the effects of orthostatic intolerance, also known as suspension 1.) Remove carabiner & strap trauma. from pouch Potentially 2.) Attach carabiner fatal to opposite side of suspension harness trauma can occur within minutes of a fall. Since BuckStep 105RS the typical rescue time is 15 minutes, the BuckStep allows a victim to immediately deploy a body support system that allows for improved blood circulation and the ability to move and flex muscles until rescue. Compact and easy to mount, the BuckStep attaches to any brand full body harness and is fully adjustable for any sized user. Order Model 105RS for an arc tested system that meets ASTM F887. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

110

Model 694 - Rescue Buck Rescue Buck is ideal for pole top rescue training, retrieval training and fall protection testing. You can fill rescue Buck with recycled tires to the desired weight. Height 5' 6" (1.68 m) Model 38523-M body belt is recommended for the Rescue Buck Model 694F1 - BuckMix Buckmix rubber pellets: 55 lb. bag.

Ratchet Boom Strap Model 3809R Ratchet Boom Strap (5000 lbs. rated) The ratchet boom strap provides a secure anchor on the bucket truck boom.


new Model 125R - Buck-It Restraint System Buckingham has developed a bucket restraint system to address the concern of the OSHA compliance officers allowing a user wearing a full body harness and 6 foot lanyard to fall from the basket and hit an object below.

System Concept: • A 10,000 lb. nylon strap is secured around the basket using a ratchet strap and secured with a cotter pin. • The strap that secures the user is independent of the basket strap and ties back to the anchor • This system allows users the mobility to do the work and avert the chance of falling.

Fall Protection

Buck-It Restraint System

Bucket Restraint

System also includes a shock absorber between the anchor attachment and user. This unique feature will keep the operator, the basket and the boom from hitting the ground in the event of a catastrophic separation of the bucket from the boom. Should the webbing around the basket be severed, the attachment back to the anchor is independent of the webbing around the basket. Basket Restraint Deceleration Lanyard

Extension Strap

Buck-it Restraint System attached to Harness

Ratchet Jacket

Ratcheting Basket Strap

Wear Guard Waist Belt / Harness Floating Restraint Strap

Cotter Pin to prevent from coming loose

Buck-It Accessories

Model 125R2 - Mounting Bracket For Buckets with controls on the outside, the Buck-It Fiberglass Bracket keeps webbing against the basket to prevent user getting tangled in webbing while using the controls. Before without Bracket

Model 125R1 - Retro Harness Strap The Retro Harness Strap adds onto a harness to connect the Buck-It Restraint System

After with Bracket

111

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Fall Protection

Confined Space Retrieval Confined Space Retrieval Systems When entering a confined space, a worker must be attached to an independent lifeline for adequate fall protection and retrieval. Buckingham's retrieval systems exceed all current OSHA and ANSI requirements. Read and follow the users manual enclosed with every system. A complete retrieval system should consist of: 1) A man rated winch to be attached to personnel at all times during the descent and work below grade. 2) Tripod 3) Full Body Harnesses (See Harness Section) 5003 4) Work Winch to raise and lower materials only. (Tripod) Tripod, Man Rated Winch and Work Winch are purchased separately. 5000 3-way Winch

5010 (Personnel Winch)

Confined Space Retrieval Harness Model 80 - Confined Space Retrieval Harness Designed to easily lift a hurt man out of a confined area. Simply place the harness under the victim just below the armpits, secure the hook and loop chest strap closures, pass the leg straps with carabiners between the victim's legs and attach to leg strap loops. Attach winch line hook to the retrieval loop, and lift to safety. The unique design of the retrieval harness supports the victim in an upright position making it easy to lift victim through man hole. One size fits all.

Accessories

Model 5000B Carry bag for retrieval system winch

Model 50037B Carry bag for 7' Tripod

Model 5007 - Pulley

Model 50039BY Carry bag for 9' Tripod

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

112

Model 72 - Retrieval Yoke w/ Two 36" (.9mm) Legs Uses two locking snaphooks, 1 3/4" (44.5 mm) nylon web and a 5000 lb. (22.2 kn) rated dee ring.


Confined Space Retrieval

Fall Protection

Component Accessories

5007 Pulley and carabiner sold separately

Capabilities

Model 5000 3 Way Winch

Model 5002 Work Winch

Model 5010 Personnel Winch

1) Arresting

Yes

No

No

2) Retrieval

Yes

Yes-Materials Only

Yes

3) Lowering

Yes

Yes-Materials Only

Yes

Above winches come in 50', 65' or 100' lengths. Please designate length desired. Winches may be purchased with spectra rope (Kevlar) as lifeline by adding suffix 'K' to model number. Winches Specifications

Model 5000

Maximum Working Load

350 Pounds (136 kg

Tripod Specifications

Model 5003 7 Foot Tripod

Model 50039 9 Foot Tripod

Cable Speed to Engage Brake

4.5 Ft./Sec. (1.4 m/sec)

Maximum Static Load

5400 pounds

5400 pounds

Stopping Distance

<24" (220# Wt. - No Free Fall) .6 m (100 kg)

Maximum Work Load

350 pounds

350 pounds

Arresting Force

1200 Pounds (5.3 kn) (approx.)

Height With Legs at Maximum Extension at Minimum Extension

84" 84" 48"

108" 108" 96"

Gear Ratio

5.5:1

Retrieval Speed

20 Ft./Min. (6 m/sec) (approx.)

Brake System

Friction Disk

Distance Between Feet at Maximum Extension at Minimum Extension

56" 36"

68" 45"

Cable Length

50, 65 or 100 ft. (15, 20 or 30 m)

Weight

50 ft. (15 m) - 32 lbs. (14.5 kg) 65 ft. (20 m) - 35 lbs. (15.9 kg) 100 ft. (30 m) - 50 lbs. (22.7 kg)

Upper Legs Aluminum Extrusion Wall Thickness

1 3/4" x 1 3/4" o.d 1/8"

1 3/4" x 1 3/4" o.d. 1/8"

1 1/2" x 1 1/2" o.d. 1/8"

1 3/4" x 1 3/4" o.d. 1/8"

Housing

Aluminum Alloy

Lower Legs Aluminum Extrusion Wall Thickness

Rope Drum

Aluminum Alloy

Adjustment Lengths

2 3/4"

2 3/4"

Shaft

Stainless Steel

Mainspring

Spring Steel

Permanently Attached Push Pin

Galvanized Steel 3/8" dia.

Galvanized Steel 3/8" dia.

Brake Pawls

Stainless Steel

Feet

Brake Cog

Stainless Steel

Cast Aluminum 6 1/2" x 3" W x 2" H 5 1/4" x 2 1/2" W

Cast Aluminum 6 1/2" x 3" W x 2" H 5 1/4" x 2 1/2" W

Head Forged Anchor Bolts Pre-drilled Leg Locks

Cast Aluminum 5/8" x 6" 3/8" x 4"

Cast Aluminum 5/8" x 6" 3/8" x 4"

Leg Chains Weight

168" 40 pounds

192" 46 pounds

Bearings

Ball Bearings

Brake Pad

Composite

Cable

Galvanized Steel Stainless Steel Kevlar Rope

Rubber Pad

BUCKINGHAM WINCHES (Made in the USA)

113

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Fall Protection

Non - Entry Manhole Rescue Systems Material / Rescue Lift with Guard

Turns Retrievals into Rescues This unique system allows for a rescue to be accomplished without having to send additional personnel into the hazardous area. Two ways in which a rescue can be performed are: Model 105Q1-30: Entrant suited with a full body harness (No. 63936Q) enters the confined space with a lifeline (39SAM13Q1) attached. The lifeline is attached to the manhole guard/rescue winch with a specially designed breakaway assembly. This device will release upon impact such as that of a vehicle which has entered the work zone and strikes the manhole guard. For rescue the attendant/rescuer attaches the ascender to the winch line and proceeds to raise the victim. Model 105Q2-30: Entrant suited with a full body harness (No. 63936Q) enters the confined space without being tethered. For rescue the attendant/rescuer uses the rescue line system (39SAM13Q9-30). The rescue line equipped with a carabiner is attached to a 16' telescopic pole via the telescopic pole adaptor (Model 40). The adaptor releases the carabiner once the rescuer locates one of four reflective rescue loops, "hooks" into a loop and pulls back on the pole. The rescue line is then tied on to the winch and the rescuer then proceeds to raise the victim. This rugged material lift is an excellent device for raising and lowering equipment and material into manholes. It clamps securely to the manhole guard, making it a safety fence as well as a valuable tool and rescue device. The entire unit is lightweight and portable, sets up quickly and has a 300 lb. capacity. The side pieces are constructed of high tensile, heavy-gauge aluminum with a durable yellow finish that stands up to rough weather and wear. Lift rope 3/8â&#x20AC;? Amsteel II Braided Rope. Model 105Q1-30 Lifeline Kit includes: manhole guard, winch [Fig.1] and 39SAM13Q3-30 Lifeline Kit [Fig. 2]. Model 39SAM13Q3-30 [Fig. 2] Lifeline Kit includes one 30' lifeline, with ascender, break away assembly and rope bag.

[Fig. 2] Model 105Q2-30 Rescue Kit includes: manhole guard, winch, [Fig. 1] 39SAM13Q9-30 Rescue Line Kit [Fig 3] and 16' telescopic fiberglass pole [not pictured]. Model 39SAM13Q9-30 [Fig. 3] Rescue Line Kit includes two 30' rescue lines, Model 40 telescopic pole adaptor and rope bag.

[Fig. 1]

[Fig. 3] Model 63936Q Features a dorsal web loop ring and easy access reflective loops at the shoulders, hips, pigtail and neck area. Order Harnesses separately.

Model 40 for Telescopic Pole Adapter Assembly (shown attached to a carabiner).

For a free DVD demonstrating both systems, call Buckingham Customer Service at 1-800-937-2825 Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

114


Ladder & Roof Top Fall Protection Ladders and rounded poles are a potentially dangerous combination. Buckingham offers a ladder safety solution that includes ladder safety straps enclosed in bags that are attached to your ladders. No more forgetting the safety straps in the vehicle or the garage. Straps are ready for deployment when the ladder goes up to prevent kickout and excessive rocking. The Buck Ladder Lock is designed for poles and trees. The Buck Ladder Lock advantages include: • Bags that do not interfere with the climbing space of the technician’s foot or interfere with the storage of the ladder on the truck. • Highly visible brightly colored bags to remind technicians that protection is required. • Quick access to straps. • Weather resistant storage bags. • Complete system with top and bottom bags and straps: Model 355BT • Bottom bag and straps: Model 355B • Top bag and straps: Model 355T

Model 355B, Yellow Bottom Storage Bag & Straps

Fall Protection

Ladder Fall Protection Systems

Model 355BT

Model 355T, Orange Top Storage Bag & Straps

Roof Top Fall Protection Systems Roof top fall protection is required when working on sloped roofs or within 10 feet of the edge of flat roofs. Model 3111 is designed to fall protect individuals installing roof top equipment. Includes:

Model 3114 The Fall Arrest Solution for roofers designed as a temporarily installed anchorage connector on wood frame structures with lifeline components including: • Full Body Harness • Shock Absorber attached to Rope Positioner (compatible with 5/8" rope only) • 50' of Multiline 5/8" rope • Roof Anchor • Nails • Carry Bag Rated to 310 lbs.

• Model U6393600 - Full body harness. • Model 5V+5113H - Buck Stop Deceleration Lanyard. • Model 7+K+K4A1100 - 100' of 5/8" diameter multiline rope with 2 locking rope snaps on opposite ends. • Model 45400R2-18 - Carry bag. • Model 16-16R-150 - 16 oz. red throw bag with 150' of attached slickline. • Model 4560 - Carry bag for throw bag and slickline.

115

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Fall Protection

Notes:

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

116


Buckingham Offers a variety of Tower Fall Protection Systems to fit many needs.


Tower

Tower Fall Protection Systems

Summary of the "ABC's" for Tower Fall Protection

Tower Fall Protection consists of three crucial components: Anchors, Body Support, and Connecting Devices. All three components are required for any fall protection system whether it is work positioning, fall arrest, fall restraint, retrieval, or suspension. Without the "ABC" components fall protection can not be completed. Buckingham offers numerous anchors, body support and connecting device components used in fall protection as well as complete systems. The information in this catalog is to be used as a reference. Please consult instructions and warnings before use.

A

Examples of:

nchors

Temporary Anchors

Anchor Straps Model 3901 Model 3902-6

Rope Grabs Model 5004 Model 5004F Model 5004T / 5004K

B

Examples of:

Anchors

Buck Hook Model 50371U

Step Bolts Model 3058 Model 3075

Flange Model 30-F1 Model 30-F2 Model 30-F3 Model 30-F4

ody Support

Buck Ergo Model 619891

C

Y Style Harness w/ Body Belt Model 61992

X-Style Harness w/ Body Belt Model 61991

Examples of:

onnecting Devices

BuckAdjuster Model 9+N08K15A2M4 Pole Strap SuperStrap Model 337099E Model 48129W2Y

Buck Ergo Modular Body Belt: Model 4200 Harness Model: 68D98C74C0K4

Body Belt features female interlocking buckles and harness features male to connect.

Buck Yard PFL Tie Back PFL Dual Buck Stop Model 6008-74+YV+Z Model 6008-74+Y+TC+Z Model 546716RD+H+Z Model 84V116+Z Dual PFL Step-SafeTM Buck Stop Tie Back Model D6008Q1 Model 61 Model 5V+T7A116X6

Indicates meets ASTM F887 Electric Arc Performance Requirements. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

118


Dual Lanyard Fall Arrest Systems mandate the user to be continually attached to the structure starting from the ground, all the way to the top of the structure, and back down to the ground. A rescue system is built into the Dual Fall Arrest System.

Anchorage

- Step Bolt / Flange - 5000lbs See pg. 122 for details.

Model 3058 & 3075 Step Bolts

Tower

Dual Lanyard System

Tower Fall Protection Systems

Model 30-F1 Flange

Body Support - Harness ideal for Work Positioning and Rescue See pg. 123-125 for details. Model 619891 Buck ErgoBelt / Harness

Connecting Device - Dual Lanyard with hardware options See pg. 126-127 for details

Red Rescue Loop

Model 546716RD+H+Z Dual Buck Stop

Model D6008Q1 Dual PFL

Rescue

- In the event user was to fall rescuer would: 1. Connect Descender to Anchor 2. Connect LifeLine to Loop on Lanyard closest to victim 3. Ensure LifeLine is secure and then cut the red rescue loop See pg. 128-129 for details.

To Ascend / Descend

Model 301SR Self Rescue System

Model 101SRQ38-250 Self Rescue System

1. The climber attaches one end of the dual lanyard to the anchor step bolt/flange on the tower or pole and begins stepping up until the waist is even with the connection. 2. The climber would then take the other end of the dual lanyard and connect to the anchor above approximately three steps up. 3. Once secure, the climber would disconnect the connection at the waist and ascend until the connection above is at the waist and repeat the process until desired height is reached. To Descend: Disconnect the upper connection while the connection is maintained at the waist level. To Transition Horizontally: Use a temporary anchor strap Model 5009E-36 or 3901 (see pg. 122 for details) and wrap around davit arm. Take one leg of the dual lanyard and connect to temporary anchor while other leg is still connected to step bolt / flange.

119

Model 3901 Temporary Anchor

Model 5009E-36 Rescue Figure 8 Strap

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Tower

Tower Fall Protection Systems Buck Hook System

The Buck Hook offers fall protection from ground, to elevated heights, back to ground.

Anchorage - Buck Hook - Temporary Anchor See pg. 122 for details.

Buck Hook Model 50371U

- Rope with Rope Grab See pg. 122 for details.

Body Support

Model 5004F 5/8" Rope Grab

Model 5004 5/8â&#x20AC;? Rope Grab

Lifeline Model 39SQ3-30

Model 5004T 5/8 - 3/4" Rope Grab

- Full Body Harness / Body Belt combination with work positioning dee rings See pg. 123-125 for details

Model 61992 Y Style Harness With Body Belt

Connecting Device

- Secondary Lanyard / Positioning Strap See pg. 126 for details

Model 9+N08K15A2M4 Secondary Lanyard

Model 337099E Positioning Strap

Model 48129W2Y Secondary Lanyard

To Ascend / Descend 1. With sternum attachment on harness, connect short tether to rope grab using a carabiner. 2. Using the extension pole with Buck Hook and 1/2" non-stretch rope attached, lift hook up and hook onto lattice making sure the end of the pole is at foot level to ensure pole does not get caught in a bolt bag or other equipment allowing the possibility of lifting the hook off the lattice. 3. Once hook is in place on lattice, climb up near Buck Hook. 4. Secure secondary positioning lanyard (not to exceed a 2' fall) around lattice. Once secure, move Buck Hook up to next highest point making sure the end of the pole is below the feet. 5. Once at work site user should secure the climbing line to a suitable anchorage point. Lifeline can then be attached to anchor strap. 6. Once lifeline is installed to secure anchor, other climbers can connect their sternum attachment on harness to a rope grab and ascend or descend.

Model 101SRQ38-250 Self Rescue System

Model 301SR Self Rescue System

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Rescue System should always be available. See page 128-129 for rescue systems.

120


Tower Fall Protection Systems Model 61, the Step-SafeTM System, offers the user a dual lanyard for continuous attachment while climbing lattice or tubular transmission structures. This system utilizes an ergonomic snap that fits over an existing 3/4" dia step bolt with a hex or cap. The system consists of the dual lanyard, two special carabiners and two web anchor straps. See pg. 126 for details.

Tower

Step-SafeTM System

Web Anchor Sling (included)

Step-SafeTM Dual Lanyard

Ergonomic Snap

Step-Safe Dual Lanyard with Scaffold Carabiners Attached

Model 3901 Model 3902-6 Web Anchor Straps (Sold Separately)

To Ascend / Descend 1. The user would reach up to a step connecting one leg of the lanyard. 2. Step up until snap is slightly below waist and connect second leg to a solid step ensuring snap is locked in place. 3. Once hook is secured disconnect connection by waist and climb up until connection above is at waist. To Transition Horizontally: User can connect either the carabiner or secure the web anchor strap over the davit arm or lattice steel as shown below.

Specifications

Alloy Double Action Snaps Gate Face 220 lbf. Side Load 350 lbf. Meets ANSI Z359.12-2009 Tensile Test, 5000 lbf. Snap features an integral load limiting design to help reduce the force coming onto a step bolt and the hook itself.

Step-SafeTM Web Anchor Sling

Model 3902-6 Web Anchor Strap

Scaffold Carabiner

Scaffold Carabiner Gate Opening 2.04" (52 mm) Weight 13.22 oz (375 g) Outside Dimension 8.93" x 5.19" (227 mm x 132 mm) Meets ANSI Z359.12-2009 Tensile Test, 5000 lbf.

121

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Tower

Tower Fall Protection Components Anchorage

Model 3058 & 3075 Step bolts with anchor: 3058 - 5/8" Diameter thread 3075 - 3/4" Diameter thread

Flange Bolt Hole Model# Dia. 30-F1 11/16" 30-F2 15/16"

Overall Length: 8 1/2" Tread Length: 5" Thread Length: 2 3/8" 5000 lbs. Rated

Model 50371U - Buck Hook The Buck Hook offers fall protection from ground to elevated heights back to ground. The system can be used in conjunction with Model 39SQ3-30 lifeline and Model 5004K rope grab or Model 6007-164DV+Z retractable lifeline. Buck Hook has a universal head and connects to a standard fiberglass stick. Model 5004T - Rope Grab Model 5004 Rope Grab fits 5/8” - 3/4” rope. Stainless steel 5/8” Rope The grab is made of high quality Grab aluminum alloy with dual cams Grab moves freely up and for better braking. This grab will down until a fall occurs. move freely up and down until a The downward pull will fall occurs. stop the fall by locking the Model 5004K for use on 1/2" CAM to the rope. kernmantle rope.

Model 7V-4A150+Z - 50' Lifeline • 5/8" diameter 3 strand blended polyester/polyolefin rope • 17061 locking snap hook • Meets ANSI Z359.12-2009 standard Model 7V-4A1100+Z: 100' Life Line Use with Rope Grabs: 5004F, 5004, 5004T Model 3901 Temporary Anchor Allows user to make a half hitch around a secure anchor. Overall length is 72". (Available in any length; e.g. to order a 5' length use model number 3901-5). Rated to 5000 lbs.

Model 4888-40 - Lifeline • 3/8" eye to eye wire sling • 5/8" metal thimble • 40' spliced 5/8" Tenex rope with dual whipping twine, 80lbs. each, and a locked brummell splice. Other lengths available. Use with Rope Grabs: 5004F, 5004, 5004T Model 3902-6 Temporary Anchor Utilizes a small dee to pass through a larger dee making a secure anchor. Overall length is 72". (Available in any length; e.g. to order a 4' length use model number 3902-4). Rated to 5000 lbs.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

122

Flange Bolt Hole Model# Dia. 30-F3 13/16" 30-F4 1 1/16 Model 5004F - 5/8" Rope Grab Moves up and down the rope with user until a fall happens, then it locks to the rope. Rope grab also has the added feature of a park brake, so the user can lock the grab above their head while working to minimize the fall distance.

Model 5013 - Cable Grab This Cable Grab works on 3/8” cable. Should the user fall while ascending or descending, the cable grab will lock onto the cable preventing the user from falling more than one foot. Model 5012 for use on 5/16" cable.

Model 39SQ1-150 Lifeline 1/2" Kernmantle lifeline features a stitched end with steel thimble. Use with Rope Grab: 5004K Model 39SQ3-30 30' Lifeline for use with Model 50371U Buck Hook

30342 (Option +H); Tower Snap 15/16" (24mm) eye (I.D.), 3 11/32" (85mm) opening, 13" (330mm) length. Rated to 5000 lbs.


Tower Fall Protection Components Buckingham Harness and Body Belt combinations are ideal for individuals working where both Fall Protection and Work Positioning are required. Any linemanâ&#x20AC;&#x2122;s body belt can be permanently attached to a harness by means of stitching or by web loops. If you want a belt that can be removed, Buckingham offers quick connect nylon clips attached to the harness that keeps the body belt in place.

Model 619891 - Harness, ErgoBelt Combination (Sold Together) Harness: 'H' Style Body Belt: 4200 Buck ErgoBelt

Tower

Harness & Body Belt Combinations

Meets all applicable ANSI standards Order by adding suffix: Harness Size (S, M, L, X) / D Size i.e. L/24

The 619891 is a combination of a harness connected permanently to the Buck ErgoBelt upper section through tunnels built into the belt. The harness is not sandwiched between the user and belt providing greater freedom of movement. Harness features a sateen liner on belt and shoulder pads, grommet leg straps, adjustable chest strap with patented quick connect buckle, rescue loop that can be used for pole top rescue, and dorsal attachment for pole top rescue (can be replaced with a dee ring or nylon loop). The ErgoBelt features a stabilizing strap, removable lumbar pad, plus buckles to connect to the lower seat section providing an extra set of dee rings if desired. Model 61992 - Harness, Body Belt Combination (Sold Together) Harness Model: 'Y' Style Body Belt Meets all applicable ANSI standards Order by adding suffix: Harness Size (S, M, L, X) / D Size i.e. L/24

This 'Y' style harness, body belt combination features five dee rings: one at the dorsal, one at the sternum, one at the waist, and two for work positioning, and is put on by stepping into the belt, pulling the 'Y' over head and connecting a carabiner to the 5000 lb. rated loop at the waist. Harness features blue sateen shoulder pads, and wide leg pads with patented quick connect buckles for added comfort. The harness neck features a 'U' designed stitch pattern making the opening wider eliminating neck irritation. Buckle in front and back adjust height to create a snug fit. Body belt features tool loops, accessory snap and rings. Belt tightens using two friction buckles in front of the work positioning dees. Model 61991 - Harness, Body Belt Combination (Sold Together) Harness: 'Y' Style Body Belt: Four Dee Meets all applicable ANSI standards Order by adding suffix: Harness Size (S, M, L, X) / D Size i.e. L/24

The 61991 is a combination of an 'X' style harness permanently attached to a four dee ring body belt. Harness features grommet leg straps, and shoulder straps that articulate through the sternum dee ring allowing the user to move with comfort. Shoulder straps adjust with a single slide buckle on the upper portion of the harness. The body belt has four work positioning dee rings, one upper set for secondary lanyard attachment and one lower set for primary attachment. Body belt is lined with sateen material and features a waist belt made of neoprene sandwiched between leather. Upper and lower sections are are connected together with webbing exceeding 5000 lbs tensile strength.

Indicates meets ASTM F887 Electric Arc Performance Requirements.

123

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Tower

Tower Fall Protection Components Harness & Body Belt Combinations Model: 169064H2 - Ergovation Harness (Sold Together) Meets all applicable ANSI standards

The Ergovation® Y-Style Harness is a unique harness tailored specifically to users that require either dorsal or sternal fall arrest attachment. It also has the ability to accommodate individuals utilizing Single Rope Technique (SRT) to access their work vertically. By utilizing the harness the climber is able to decrease the strain on the low back region and disperse the weight of the harness, as well as the tools that the climber is using, throughout the entire upper body. This Y-Style Harness is unmatched in comfort, durability, and versatility and it’s features include: ¼” closed cell foam padding for improved comfort and hygiene, pads stitched to the harness webbing to prevent shifting and improve easy donning of harness, aluminum dee ring for decreased weight and increased comfort while aloft, and Y2 friction buckles for quick and secure adjustment of webbing in front and in back. Rated to 310 lbs. Harness: 68D98C74C0K4 - 'H' Style (Sold Separately) Body Belt: 4200 Buck ErgoBelt (Sold Separately) Meets all applicable ANSI standards

Harness is designed to connect to the 4200 Buck ErgoBelt with interlocking buckles. Features patented quick connect buckles at the chest strap and leg pads, vertical shoulder adjustment, and leather chafes behind the leg buckles for comfort and to reduce the potential of static charge. Harness features a 5000 lb rated nylon dorsal loop that eliminates metal and allows user to girth hitch their shock absorber. Body belt attaches to harness with female interlocking buckles located at the top of the pad. The ErgoBelt offers supreme comfort and features abdominal stabilizer system, dee ring distributing pads, equalization straps, removable lumbar support, and removable seat.

Harness Model: 603P8Q10 - 'X' Style (Sold Separately) Body Belt Model: 2000M (Sold Separately) Meets all applicable ANSI standards

Harness features a nylon web loop at the sternum, steel dorsal dee attachment point, webbing and interlocking buckles to allow user to insert a body belt, patented quick connect buckles at the leg straps and front connection, FR shoulder pads with loops and a 5000lb rated extra seat strap for use with the Buck-It restraint system. Body belt shown (2000M) is made from the highest quality leather and features a 5 1/2" foam cushioned back pad reinforced with raw hide lace. Harness can be adjusted to fit any size/type of body belt. Note: Similar harness with body belt attachment point can be ordered with a 'U' shape design to eliminate irritation of webbing around neck. See pg. 92 Model 603P8Q8. Indicates meets ASTM F887 Electric Arc Performance Requirements. Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

124


Tower Fall Protection Components Model 62995 - Harness, Body Belt Combination (Sold Together) Harness: 'H' Style Body Belt: Lightweight Padded

Tower

Harness & Body Belt Combinations

Order by adding suffix S, M, L & X

This ‘H’ style full body harness is an economical choice and features interlocking buckles on the chest strap, steel dee dorsal attachment, friction buckles for height adjustment, and grommet leg straps. Harness is made from Type 13 nylon webbing with orange upper and black lower sections. Body belt is lightweight and padded for comfort and features work positioning dee rings and a grommet and waist strap.

Model 61995 - Harness, Body Belt Combination (Sold Together) Harness: 'H' Style Body Belt: Lightweight Drilex Meets all applicable ANSI Standards Order by adding suffix S, M, L & X Order Model 61995K1 for Kevlar mesh to meet ASTM 5887 Electric Arc Performance Requirements.

‘H’ style full body harness features Dri-lex® shell that fits like a vest, Dri-lex® shoulder and leg pads to add to overall comfort and wick moisture away from the user, patent pending quick connect buckles on the chest and leg straps, steel dee dorsal attachment, spring loaded friction buckles for height adjustment, frontal chest dee ring that adjusts up and down independently of the shoulder straps allowing the user to correctly position when using a ladder climb system, and PVC shoulder loops to stow lanyard hardware when not in use. Harness is made from Type 13 nylon webbing with silver upper and black lower sections. Body belt features specially designed work positioning dee rings to ease the attachment of a positioning strap by restricting dee ring swing, leather tool loops and an accessory snap and ring for tool storage, grommet tongue buckle to fasten the waist belt, and a 5" [12.7cm] wide belt with thick padding and built in stiffener for maximum comfort. The modular suspension system can be entirely removed if desired and includes a rigid batten seat with padding for maximum comfort (batten can be removed for those preferring a soft seat) and elastic retainers with snap fasteners on seat section to stow suspension dee rings out of the way when climbing. Model 61999 - Harness, Body Belt Combination (Sold Together) Harness: 'H' Style Body Belt: Lightweight Drilex Meets all applicable ANSI Standards Order by adding suffix S, M, L & X

Harness features a Dri-lex® shell and Dri-lex® shoulder and leg pads that are designed to wick moisture away from the user and for added overall comfort, patented quick connect buckles with leather chafes at the chest and leg straps, friction buckles for height adjustment and a steel dorsal dee attachment. Harness is made from Type 13 nylon webbing with silver upper section and black lower sections. Body belt is Dri-lex® lined and features a 4" (10.2 cm) wide padded back pad for maximum support, patented quick connect buckles at the waist belt, and steel dee rings on the hips for use with WPFR system.

125

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Tower

Tower Fall Protection Components Connecting Devices

Model 546716RD+H+Z Buck Stop Dual Lanyard Features two 30342 Tower Snaps that have a 3 11/32" gate opening. Red rescue loops facilitate the rescue of an injured worker. For locking rope snap attachment order Model 5V6716RD+H+Z.

Model 5V6716RD+4+Z Buck Stop Dual Lanyard Features two 30351 Locking Ladder Snaps that have a 2 1/4" gate opening, and a locking rope snap. Red rescue loops facilitate the rescue of an injured worker. For web loop attachment order Model 546716RD+4+Z.

Model 61 - Step-SafeTM The Step-SafeTM system features the first connecting snaps that have been designed around hand ergonomics. The Step-SafeTM snaps can hook right onto the step bolts, or the scaffolding hooks can be used. System features a shock absorber to reduce impact in the event of a fall.

Model 500000 Shock Pack 6" shock pack covered by clear plastic for easy inspection that greatly reduces the force of a fall at both the anchor point and the person.

new

Model 84V116 - Buck Yard Lanyard The Buck Yard has the flexibility of a standard web or rope lanyard with the benefit of a reduced arresting force. The tubular nylon exterior may expand 42" maximum while the interior material stretches to reduce the arresting force to less than 900 lbs. The Buck Yard is available in 4', 4 1/2' and 6' nonadjustable lengths. When ordering an arc tested (Meets ASTM F887) BuckYard, add the 'S1' suffix to the model#; e.g.: 84V116S1. Add suffix +Z for all 3600lb. hardware to meet ANSI Z359.12-2009.

Model 9+N08K15A2M4 BuckAdjuster Made from stitched 1/2" rope with a green and white jacket with red core. Lanyard features a snap hook and the BuckGrab.

Model 5V+T7A16X6 Buck Stop TieBack Lanyard Shock absorbing lanyard with specially designed snap hook making it safe and easy to tie back to itself. A 17061 snap hook is used to attach to the users harness. Meets ANSI Z359.13-2009 standard.

Model 48129W2Y - SuperStrap The SuperStrap has all the benefits of web combined with the easy adjustment of rope. Features the patent pending WebGrab for easy adjustment. Designed to use climbing over obstruction. Available in 6', 7', 8' and 9' lengths (add suffix: '-length' i.e. 48129W2Y-8).

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

126

Model 6007-164DV+Z Lightweight 16' Webbing Retractable Lifeline This Lightweight Retractable lanyard features a light yet rugged composite housing. Housing swivels to minimizing twisting during use. Meets ANSI Z359.14. Weighs 4.6lbs.

Model 337099E - SuperStrap SuperStrap is made from 6 ply neoprene nylon with red warning core and features the patent pending WebGrab for easy adjustment, and no holes to find or run out of like conventional straps. Model 334299E - 5'8" Model - 337099E - 7' Model 336099E - 6' Model - 338099E - 8' Model 336699E - 6'6"


Personal Fall Limiters

• Aluminum Alloy Construction Inside & Out: both the mechanism and housing made of corrosion resistant alloy. • Tangle free swivel top for added mobility. • 7' extension for expanded work area • Dyneema® polymer fiber 1" webbing - up to 15x stronger than steel. Resistant to moisture, abrasions, UV light and chemicals. RETRACTABLE UNIT

LENGTH IN FEET

SWIVEL

w

• A braking system designed for smooth consistent operation to prevent "jerky" lock-ups. • No factory recertification required. •Retractable unit (no hardware) only weighs 1.9lbs • Rated to 350 lbs. • Dual BuckLimiters offer continuous 100% fall protection (not for multiple user connection)

Connecting Device (Swivel end) *

Connecting Device (web end)*

7'

C = Red 1' tube wear piece 22" long working length (26" cut length) D = P/N 50051 Steel Carabiner w/ 3600 lb. gate

6008 = Single PFL 6008K = For Kevlar to meet ASTM F887 Sections: 23.8.1, 23.8.2, & 23.8.3

OPTIONS

4 = Swivel Built In

+Y = Triple Lock Aluminum Carabiner (3600 lbs. gate)

+4 = 2 1/4" locking snap 3035 or when used w/ option +Z , a 30351 w/ 3600 lb. gateload

D = P/N 50051 Steel Carabiner w/ 3600 lb. gate

P = Conlour Foam Pad with two adjustable straps and two elastic straps W4 = Manufactured with deployment label. To deploy @ 600lbs.

D6008 = Dual PFL

V = 1706 snap or when used w/ option +Z, a 17061 w/ 3600 lb. gateload.

+T = N 3618 Tie Back Snap, 3600 lb side & gate load compatible

+Y = Triple Lock Aluminum Carabiner (3600 lbs gate) +Z = All hardware on lanyard meets Z359.12 2009, 3600 lb requirements * Load capacity = 350 lbs.

6008-74DV+Z

6008-74D+4+Z

6008-74+YV+Z

6008-74+Y+Y+Z

6008-74D+4+Z Attached to a BuckFit harness

6008-74+Y+4+Z

Model 6008-74+Y+TC+Z - Tie Back BuckLimiter Features a specifically designed flat bill snap which allows webbing to lay flat.

Model D6008Q1 Dual BuckLimiter

127

Model D6008-74+Y+Z Dual BuckLimiter

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Tower

BuckLimiter

ne


Tower

Tower Fall Protection Rescue Systems Rescue Systems

new

Compact!

Model 301SR - Self Rescue System This New Self Rescue System features a new lightweight, compact design. The lightweight descender is manufactured from aircraft grade aluminum and features an anti panic release brake which will stop the descender if the user releases or compresses the descender all the way. The TVAC descent line measures 6.8 mm and is compact and stands up to heat on long descents. System is packed in a weather resistant nylon bag with a mesh bottom to let moisture escape. Comes with two rappelling straps. Rated to 300 lbs. Model 301SR-50 for 50' Model 301SR-75 for 75 Model 301SR-100 for 100' Custom lengths available upon request.

Model 101SRQ38-250 - Self Rescue System This Self Rescue System comes complete with everything needed to perform a rescue of an injured victim from a tower or steel structure. System includes a 250' line with descender, anchor slings, pick off strap, rappelling straps, skinning knife with pouch, all packed in a backpack rope bag. Custom lengths available

Model 5009E-36 - Rescue Figure 8 Strap Rescue Figure 8 strap is designed to be girth hitched on a structure to aid in a rescue of an injured victim. The strap is 36" long and made from 1" yellow webbing. The Figure 8 is made from aluminum and can either be ordered without ears (Model 5009-36), or with ears (Model 5009E-36) to prevent rope from slipping down and knotting at the bottom.

Model 4579 / 4578 - Rescue Pouch The Rescue Pouch is designed to store a knife and a Figure 8 with strap in the front pocket. The main section of the pouch can be used to store tools and miscellaneous nuts and bolts. Model 4579 Canvas

Model 4578 Leather

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

128


Model 7003S - Dual Rescue Strap Rescuing an injured co-worker has never been easier. The Dual Rescue Strap from Buckingham enables the user to safely and easily rescue a co-worker from an elevated position using our 101SR Self-Rescue System. The newly redesigned strap requires only one carabiner and keeps the descent device closer to the user for better control.

Tower

Rescue Systems

Tower Fall Protection Rescue Systems

Model 81- Buck Diaper Designed to be used for a victim that needs to be lowered from a high elevation. The Buck Diaper provides a secure, easy method to transport the victim.

3.) Step into sling with both feet

1.) Remove carabiner & strap from pouch 2.) Attach carabiner to opposite side of harness

Model 105RS - BuckStep System Designed to alleviate the effects of orthostatic intolerance, also known as suspension trauma. Potentially fatal suspension trauma can occur within minutes of a fall. Since the typical rescue time is 15 minutes, the BuckStep allows a victim to immediately deploy a body support system that allows for improved blood circulation and the ability to move and flex muscles until rescue. Compact and easy to mount, the BuckStep attaches to any brand full body harness and is fully adjustable for any sized user. Order Model 105RSK1 for an arc tested system that meets ASTM F887.

BuckStep 105RS

Model 3816 - Tower Rescue Blocks Designed specifically for the wireless telecommunication industry, this kit is designed to easily lift a victim on a tower or structure to disconnect their shock absorbing lanyard. A 4 to 1 mechanical advantage eases the process. Includes an anchor sling and micro grab to anchor to a life line. Packed in a compact storage bag that can be easily attached to a harness or belt. 10' lifting height.

129

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Tower

Tower Accessories Horizontal Lifelines Model 5389-60 - Horizontal Lifeline System This Horizontal Rope Lifeline System with 5/8" synthetic rope polysteel is a temporary fixed safety lifeline. Lifeline is suspended between two anchor points and allows a worker to freely move across a horizontal plane. This system contains a rope tensioner that maintains desired tension on lifeline, absorbs energy in the event of a fall, and permits adjustment of the horizontal lifeline. System also includes two anchor slings, two carabiners, and a storage bag.

Buck International Rope Bags ne

w

Model 4373 X-Large RopePro Deluxe Bag • Measures: 24" Tall x 14" Wide

Buckingham announces the new Buck International Line of Rope Bags featuring: • Water resistant fabric to help keep equipment dry •1 1/4" rope access port located in the lid with cap to keep dirt and water out • Zippered ventilation panels for air circulation and quick visual identification • Heavy duty lid zipper provides secure closure and maximum access to contents • Webbing gaps for tool holding clips and web loops for extra carabiners • Exterior pockets for additional storage • Attachment system for use with 4375 RopePro Deluxe Back Pack accessory

Model 4374 Large RopePro Deluxe Bag • Measures: 16" Tall x 12" Wide

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

130

Model 4375 RopePro Deluxe Back Pack Attachment (sold separately) Converts a RopePro Deluxe bag to a backpack or climbing duffle. Backpack is padded for comfort and is made with breathable materials to keep user cool and dry. Features carabiner storage loops in the shoulder straps, adjustable chest strap and reinforced edging and double stitching throughout.


Buckingham Manufacturing, Excelling With Safety Since 1896.


Promotional Products

Buckingham Promotional Products

Shirt 1 - Long Sleeve Buck Logo A long sleeved green shirt that features a larger Buckingham logo on back and a smaller logo on front. Also features Buckingham on the sleeve. Available in S, M, L, XL & 2X.

Shirt 2 - Short Sleeve Buck Logo A green Buckingham T-shirt that features a big Buckingham logo on the back and a small logo on front. Available in S, M, L, XL & 2X.

Shirt 6 - Short Sleeve BuckMan BuckMan short sleeved T-Shirt features Climb Safe With Buck on back and the Buckingham logo on front. Available in S, M, L, XL & 2X.

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Shirt 7 - Long Sleeve BuckMan BuckMan long sleeved shirt features Climb Safe With Buck on back and the Buckingham logo on the front. Also features Buckingham on sleeve. Available in S, M, L, XL & 2X.

132


Shirt 3

Shirt 4 Shirt 3 & 4 - Golf Shirts Both shirts feature the Buckingham logo on front. Available in S, M, L, XL & 2X. Shirt 3 Comes in green with a navy collar. Shirt 4 Comes in white with a green collar.

Shirt 5 - Denim Button Up A denim button up shirt that features the Buckingham logo on the front. Available in S, M, L, and XL.

5555CT - Carhart Buckingham Jacket A green Carhart zip up jacket with two front pockets. Features the Buckingham logo on the front. Available in S, M, L, XL & 2X.

1- Buckingham Hat Green Buckingham hat that features the Buckingham logo on the front and Climber's Choice on the back. One size fits all.

1C - Buckingham Camo Hat Camouflage hat that features the Buckingham logo on the front and Climber's choice on the back. One size fits all.

133

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

Promotional Products

Buckingham Promotional Products


Promotional Products

Buckingham Promotional Products 5296-BL - Portfolio A black leather portfolio that features a pocket for business cards. Measures 10" x 12". 5295-BL - Satchel The Buck satchel features a spring loaded closure and measures 10 1/2" diameter x 16" length. Comes in brown (BR), burgundy (BU) and black (BL).

5005NK - Carabiner Key Chain A Non-locking key chain carabiner. Length 3", opening 5" and breaking strength is not rated. Not intended for human support. Model 1231

Model 1230 4004 - Leather Key Chain A Buckingham key chain featuring the Buckingham logo.

1231 & 1230 - Mini Buckets Can be used for connectors, nuts and other small items. Also can be set on a desk or hung in a vehicle for other uses. Great for safety awards

Notes:

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

134


Cat. No.

Description

Pg.

B1 Fiberglass Bumpers 83 B2 Fiberglass Bumpers 83 D6008-74+Y+Z Dual BuckLimiter PFL 103, 127 D6008Q1 Dual BuckLimiter PFL 7, 103, 118, 119, 127 N11T Replacement Gaff Screws 15 NB9106A Climber Gaff 7, 15 NB9206A Climber Gaff 7, 15 NB9306 Climber Gaff 7, 15 S97089 Climbers 14 SB91059A Climbers 13 SB91089A Climbers 13 SB93059 Climbers 14 SB93089 Climbers 14 SB94059A Climbers 13 SB94089A Climbers 13 SB95059 Climbers 14 SB95089 Climbers 14 SB96089A Climbers 13 Shirt 1 Long Sleeve T-Shirt 132 Shirt 2 Short Sleeve T-Shirt 132 Shirt 3 Golf Shirt 133 Shirt 4 Golf Shirt 133 Shirt 5 Denim Button Up Shirt 133 Shirt 6 Short Sleeve T-Shirt 132 Shirt 7 Long Sleeve T-Shirt 132 T91059A Climbers 12 Climber Gaff 15 T9106A T91089A Climbers 12 T9206A Climber Gaff 15 T94059A Climbers 12 T94089A Climbers 12 TB81059 Climbers 12 TB81429R Climbers 14 TB87479 Climbers 12 TB91059A Climbers 12 TB91079 Climbers 12 TB91089A Climbers 12 TB91429R Climbers 14 TB93059 Climbers 14 TB9306 Climber Gaff 15 TB93089 Climbers 14 TB94059A Climbers 12 TB94089A Climbers 12 TB95059 Climbers 14 TB95089A Climbers 14 TB95089S Cleated Climber 11 TB96089A Climbers 12 TB97089 Climbers 14 TB98479 Climbers 12 U6393600 Harness 115 U64A23H6E00 H’ Style Harness 88 WES Ergovation SRT Attachment 93 1 Hat 133 1C Hat 133 10 Climber Shield 25 101SR Self Rescue System 107 101SR-100 Self Rescue System 107 101SR-50 Self Rescue System 107 101SR-75 Self Rescue System 107 101SRQ38-250 Self Rescue System 119, 120, 128 102SR After Fall Self Rescue System 107 102SRS After Fall Self Rescue System 107 105Q1-30 Non-Entry Manhole System 114 105Q2-30 Non-Entry Manhole System 114 105RS BuckStep System 110, 129 106-50 Self Rescue System 108 11 Replacement Gaff Screws 15 11T Replacement Gaff Screws 15 11213 Tool Bucket 74 11215 Tool Bucket 73 11216 Tool Bucket 73 11217 Tool Bucket 73 11218 Tool Bucket 73 11219 Tool Bucket 74 11223 Tool Bucket 74 11227 Tool Bucket 73 11229 Tool Bucket 74 11233 Tool Bucket 74 11239 Tool Bucket 74 1213 Tool Bucket 74 1215 Tool Bucket 73

INDEX

Cat. No.

Description

1215TS 121514 1216 1216OS1H1L 1216P 12161 12161L 12161M2 121615CH1L 12162 1216241 12163 12164 12164L 12165L 121656 12166 12166L 12167 12167H1 12167L 12168 12168K 12168L 12169H1K 12169H1KL 1217 1218 1219 1220 1228S8 1230 1231 125R 125R1 125R2 1285 1305 1368 16-16R-150 169064H2 16906H1 16906H2 17051 1706 1711 1712 1902 1958 1962M 19655M 1988M 1993F 1994FR 1997T2 20003M 20005M 20006M 2000EM 2000M 201 2012M 2013M 2014M 2015M 2017M 2018M 2019M 202 2100M 2107M 2134 21341 2139 21391 2234 2239 2401 2401-3 2402 2403 2405

Tool Bucket 73 Tool Bucket 74 Tool Bucket 73 Oval Bucket 76 Tool Bucket 73 Oval Bucket 75 Oval Bucket 75 Oval Bucket 75 Oval Bucket 76 Oval Bucket 75 Oval Bucket 76 Oval Bucket 75 Oval Bucket 75 Oval Bucket 75 Oval Bucket 75 Oval Bucket 75 Oval Bucket 75 Oval Bucket 75 Oval Bucket 76 Oval Bucket 76 Oval Bucket 76 Oval Bucket 76 Oval Bucket 76 Oval Bucket 76 Oval Bucket 76 Oval Bucket 76 Tool Bucket 73 Tool Bucket 73 Tool Bucket 74 Tool Bucket 74 Tool Bucket 74 Mini Tool Bucket 73, 134 Mini Tool Bucket 73, 134 Buck-It Restraint System 4, 111 Buck-It Restraint Retro Straps 4, 111 Buck-It Mounting Bracket 4, 111 Electrician Belt 45 Bosuns Chair 105 Ergovation Batten Seat 93 Throw Bag 115 Ergovation Harness 124 Ergovation ‘H’ Style Harness 93 Ergovation ‘Y’ Style Harnress 93 Locking Rope Snap 101 Locking Rope Snap 101 Roto Snap 101, 102 Locking Rope Snap 101 Body Belt 36 Body Belt 36 Body Belt 33 Body Belt 33 Body Belt 33 Body Belt 34, 93 Body Belt 34 Body Belt 36, 93 Body Belt 35 Body Belt 35 Body Belt 35 Body Belt 32 Body Belt 33, 124 Leather Cleaner 38 Body Belt 34 Body Belt 34 Body Belt 32 Body Belt 32 Body Belt 32 Body Belt 31 Body Belt 31 Leather Conditioner 38 Body Belt 31 Body Belt 31 Climber Straps 24 Climber Straps 24 Climber Straps 24 Climber Straps 24 Climber Straps 24 Climber Straps 24 Bucket Hook 67 Bucket Hook 67 Handline Carrier 38 Bucket Hook 67 Bucket Hook 67

135

Pg.

Cat. No.

Description

Pg.

2406 Handline Hook 38 2407-80 Handline System 38 2434 Climber Straps 24 2439 Climber Straps 24 2444 Climber Straps 24 2449 Climber Straps 24 2634 Climber Straps 24 263432 Climber Straps 24 2639 Climber Straps 24 2644 Climber Straps 24 2649 Climber Straps 24 28344 Climber Straps 24 2839 Climber Straps 24 2844 Climber Straps 24 2849 Climber Straps 24 30-F1 Flange 118, 119, 122 30-F2 Flange 118, 122 30-F3 Flange 118, 122 30-F4 Flange 118, 122 301SR Self Rescue System 5, 107, 120, 119, 128 301SR-100 Self Rescue System 5, 107, 128 301SR-50 Self Rescue System 5, 107, 128 301SR-75 Self Rescue System 5, 107, 128 3032L Rope Grab 104 30342 Locking Ladder Snap 101 30351 Locking Ladder Snap 101 Climber Straps 24 3049 3058 Step Bolts 118, 119, 122 3075 Step Bolts 118, 119, 122 309C Tool Bucket 73 311 Tool Bucket 74 3111 Roof Top Fall Protection 115 3114 Roof Top Fall Protection 115 3118 Climber Pad 23 3119 Climber Pad 23 312C Tool Bucket 74 3120 Climber Pad 23 3122 Climber Pad 23 3124 Climber Pad 23 3125 Climber Pad 23 3126 Climber Pad 22 3127 Climber Pad 22 3128 Shank Pad 25 31301 Locking Ladder Snap 101 3201 Climber Pad 23 3202 Climber Pad 20 3202C Climber Pad 20 334299E Neoprene SuperStrap 51, 126 336099E Neoprene SuperStrap 51, 126 336699E Neoprene SuperStrap 51, 126 337099E Neoprene SuperStrap 2, 51, 118, 120, 126 33709E Neoprene SuperStrap 2, 51 338099E Neoprene SuperStrap 51, 126 341 Loop and Snap 38 3500 Climber Pad 21 3502 Climber Pad 21 3502CKL Climber Pad 21 3502KL Climber Pad 21 3503 Climber Pad 21 35032 Climber Pad 22 35032KL Climber Pad 22 35033 Climber Footplate 25 35034 Climber Pad 22 35034KL Climber Pad 22 3504 Climber Pad 21 3504KL Climber Pad 21 355B Ladder Fall Protection System 115 355BT Ladder Fall Protection System 115 355T Ladder Fall Protection System 115 364277 Positioning Strap 51 364299E Positioning Strap 51 366077 Positioning Strap 51 366099E Positioning Strap 51 366677 Positioning Strap 51 366699E Positioning Strap 51 367077 Positioning Strap 51 367099E Positioning Strap 51 3809R Ratchet Boom Strap 110 3813 Hurt Man Basket Removal 109 3813D1 Hurt Man Basket Removal 109

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Cat. No.

Description

Pg.

3813D1Q4-95 Hurtman / High Elevation Self Rescue System 108 3816 Tower Rescue Blocks 5, 109, 129 38189E Positioning Strap Extention 52 384277 Positioning Strap 51 384299E Positioning Strap 51 38523Q1 Ladder Belt 36 386077 Positioning Strap 51 386099E Positioning Strap 51 386677 Positioning Strap 51 386699E Positioning Strap 51 387077 Positioning Strap 51 387099E Positioning Strap 51 388077 Positioning Strap 51 388099E Positioning Strap 51 38A Pole Top Rescue System 50 38A-150 Pole Top Rescue System 50 38N99E Pole Top Rescue System 50 39SAM13Q3-30 Lifeline Kit 114 39SAM13Q9-30 Rescue Line Kit 114 39SQ1-150 Lifeline 104, 122 39SQ3-30 Lifeline 120, 122 3901 Temporary Anchor 104, 118, 120, 122 3902-6 Temporary Anchor 104, 118, 120, 122 40 Telescopic Pole Adapter 114 Light Replacement 84 400094 4004 Leather Key Chain 134 4013 Tool Pouch 44 4020 Tool Pouch 43 4023 Tool Pouch 43 40231-BR Tool Pouch 43 4035Y Compression Tool Holder 82 40351B3 Inline Hydraulic Crimper Bag 82 4036B4 Greenlee & Fairmont Tool Holder 82 4036S Nylon Carry Strap 82 4037 Compression Tool Holder 82 4040 Tool Apron 66 4041 Tool Apron 66 4042 Tool Apron 66 4044 Tool Apron 66 4045 Tool Apron 66 4048 Tool Apron 66 4051 Tool Pouch 43, 54 4074 Tool Pouch 44 4076 Tool Pouch 44 4079 Tool Pouch 43 4089 Knife Sheath 43, 55 40892 Tool Pouch 43 41333 Tool Bag 71 41333C7R5W3 Tool Bag 5, 71 41333O1R5W1 Tool Bag 71 41333R5Sy Tool Bag 71 4164 Tool Pouch 43 418 Glove Bag 77 4191 Tool Pouch 44 4200 ErgoBelt 3, 28, 118, 123, 124 4201 Delux LineBacker 3, 28 4202 LineBacker 3, 28 4223 Tool Pouch 43 4226 Tool Pouch 43 42266 Tool Pouch 42, 84 42266S-BR Tool Pouch 42 42666-BL Tool Pouch 42 4370B14 Haul Bag 6, 71 4371B14 Haul Bag 6, 71 4373 RopePro Delux Bag 6, 130 4374 RopePro Delux Bag 6, 130 4375 RopePro Delux Bag 6, 130 4469B1-150 Back Pack Equipment Bag 79, 108 4500 Tool Apron 84 4500Y Tool Apron 66 4500YM2 Tool Apron 66 45003 Tool Apron 84 45004 Tool Apron 84 45006 Tool Apron 84 4501 Tool Apron 84 4503 Tool Holder 86 4503B Tool Holder 86 4505 Tool Apron 84 4509 Tool Tray 83

Cat. No.

Description

Pg.

4510 Tool Tray 83 4510M2 Tool Tray 83 45100 Nut & Bolt Bag 68 4511 Tool Tray 83 4512 Tool Tray 83 4514 Chainsaw Scabbard 86 4514W Chainsaw Scabbard 86 45141 Chainsaw Scabbard Replacement Pocket 86 45147Y Telescopic Hotstick Bag 65 45148 Hoist Bag 78 45149 Hoist Bag 78 45150 Line Hose Bag 65 451509S1 Line Hose Bag 65 45151 Line Hose Bag 65 45152 Hot Stick Bag 65 45153 Hot Stick Bag 65 45154 Hot Stick Bag 65 45155 Hot Stick Bag 65 45156 Hot Stick Bag 65 45157 Hot Stick Bag 65 45158S1-44 Line Hose Bag 65 4522M Tool Holder 86 45297 Utility Bucket 72 45299 Utility Bag 72 4530R Boom Tool Holder 85 45300C Tool Bag 70 Boom Tool Holder Handle End 85 45301R 45302 Boom Tool Holder Replacement Clip 85 4531R Boom Tool Holder 85 45311R Boom Tool Holder 85 45311RC Boom Tool Holder 85 453112 Boom Tool Holder 85 45312 Boom Tool Holder 85 4532R Boom Tool Holder 85 45321R Boom Tool Holder 85 453212 Boom Tool Holder Replacement Pocket 85 45322 Boom Tool Holder Replacement Pocket 85 45331Y Tool Bag 70 453311R Boom Tool Holder 85 45332 Tool Bag 70 45333R5SY Tool Bag 70 45333S Tool Bag 70 45334 Tool Bag 70 4540MB Mesh Bag 81 45400-12 Utility Bag 72 45400-24 Utility Bag 72 45400G1-9 Mesh Bag 81 45400G1-12 Mesh Bag 81 45400G1-18 Mesh Bag 81 45400G1-24 Mesh Bag 81 45400G1-30 Mesh Bag 81 45400R2-18 Utility Bag 72, 115 45402R-36 Duffle Bag 72 4545 Aerial Basket Cover 65 45455 Aerial Basket Cover 65 454551 Aerial Basket Cover 65 4548 Aerial Basket Cover 65 4550 Fiberglass Step 86 45500G1 Mesh Bag 81 45502 Fiberglas Bucket Step 86 455200H1 Glove Bag 77 45521 Utility Bag 72 455300 Glove Bag 77 455400 Glove Bag 77 455401 Glove Bag 77 4555 Batter Tool Holder 82 4558 Wheel Chocks 57 455805 Glove Bag 77 455805Y Glove Bag 77 455895 Glove Bag 77 4559 Wheel Chocks 57 4560 Throw Line Bag 79, 115 4560G1 Mesh Bag 81 4561G1 Mesh Bag 81 4563 Bag 107 4569R2-120 Rope Bag 79 4569R2-150 Rope Bag 79 4569R2-225 Rope Bag 79

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

136

Cat. No.

Description

Pg.

4570 Nut & Bolt Bag 68 4570B2 Nut & Bolt Bag 68 4570M2 Nut & Bolt Bag 68 45701 Nut & Bolt Bag 68 45702C4S9 Nut & Bolt Bag 68 45703C4S9 Nut & Bolt Bag 68 4571 Nut & Bolt Bag 68 4573 Nut & Bolt Bag 68 4574 Nut & Bolt Bag 68 45771 Tower Worker Nut & Bolt Bag 69 45771-16 Tower Worker Nut & Bolt Bag 69 45771S9 Tower Worker Nut & Bolt Bag 69 45771S9-16 Tower Worker Nut & Bolt Bag 69 45772 Tower Worker Nut & Bolt Bag 69 45772-16 Tower Worker Nut & Bolt Bag 69 45772S9 Tower Worker Nut & Bolt Bag 69 45772S9-16 Tower Worker Nut & Bolt Bag 69 45775 Tool Bag 79 4578 Rescue Pouch 45, 110, 128 4579 Rescue Pouch 110, 128 4581 Ladder Bag 81 45891 Bucket Tool Holder 85 4585 Sleeve Roll Up 78 4587 Blanket Roll Up 78 4588 Blanket Bag 78 4589 Bucket Tool Holder 85 45911M2 Nut & Bolt Bag 68 Nut & Bolt Bag 68 4595M2 4600D1Y First Aid Blood Stopper Pouch 80 4600NY First Aid Blood Stopper Pouch 80 4600S3Y First Aid Blood Stopper Pouch 80 4650 Tool Pouch 43 4659 Tool Pouch 43 48127Y-6 Positioning Strap 51 48127Y-66 Positioning Strap 51 48127Y-7 Positioning Strap 51 48127Y-8 Positioning Strap 51 48129W2Y Web SuperStrap 2, 50, 118, 120, 126 48129W2Y-6 Secondary Web Lanyard 50 48129W2Y-7 Secondary Web Lanyard 50 48129W2Y-8 Secondary Web Lanyard 50, 126 48129W2Y-9 Secondary Web Lanyard 50 48129Y-6 Positioning Strap 51 48129Y-66 Positioning Strap 51 48129Y-7 Positioning Strap 51 48129Y-8 Positioning Strap 51 482D BuckSqueeze 2, 48 482T BuckSqueeze 2, 48 483A Practice Pole Rescue System 50 483A-50 Practice Pole Rescue System 50 483C-6 Wear Guard 50 483C1-6 Wear Guard 50 483D BuckSqueeze 48 483M BuckSqueeze Rescue Trainer 50 484T BuckSqueeze 48 485 BuckTooth 50 487 BuckWheel 50 488R SuperSqueeze 2, 49 488RQ4 SuperSqueez 2 488RT SuperSqueeze 2, 49 488RTQ4 SuperSqueeze 2 488TW2 SuperSqueeze 2, 49 488TW2Q3 SuperSqueeze 2, 49 488W2 SuperSqueeze 2, 49 488W2Q3 SuperSqueeze 2, 49 4888-40 Lifeline 104, 122 49190 Tool Pouch 42 4923 Tool Pouch 42 4926-BR Tool Pouch 42 49261 Tool Pouch 42 49261S Tool Pouch 42 494277 Positioning Strap 51 494299E Positioning Strap 51 4951-BL Tool Pouch 42 4958 Tool Bucket 74 496077 Positioning Strap 51 496099E Positioning Strap 51 496677 Positioning Strap 51 496699E Positioning Strap 51 497077 Positioning Strap 51 497099E Positioning Strap 51


Cat. No.

Description

Pg.

498077 Positioning Strap 51 498099E Positioning Strap 51 5V+T7A16X6 Tie Back BuckStop Lanyard 7, 100, 118, 126 5V+5113H BuckStop 115 5V6716RD+4+Z BuckStop Dual Lanyard 126 5V6716RD+H+Z BuckStop Dual Lanyard 126 5VV114+Z BuckStop 99 5VV114.5+Z BuckStop 99 5VV116+Z BuckStop 99 5VV116S1X6 BuckStop 99 5VV116S1X12 BuckStop 99 5VV116X6 BuckStop 99 5VV116X12 BuckStop 99 5VV126+Z BuckStop 99 5Y2-M Arm Protectors 80 5000 3-Way Winch 112, 113 500000 Shock Pack 122 5000B Utility Bag 72, 112 5002 Work Winch 113 5003 Tripod 112, 113 50037B Tripod Bag 112 50037BY Tripod Bag 72, 112 50039 Tripod 113 50039BY Tripod Bag 72 5004 Rope Grab 104, 118, 120, 122 5004B BuckGrab 50 Rope Grab 104, 118, 120, 122 5004F 5004K Rope Grab 104, 118, 122 5004T Rope Grab 104, 118, 120, 122 5005K Carabiner 102 5005L1 Carabiner 102 5005L2 Carabiner 102 5005M Carabiner 102 5005NK Carabiner Key Chain 134 5005T Carabiner 102 50051 Carabiner 102 5007 Pulley 112 5007L Rigging Blocks 105 5007S Rigging Blocks 105 5008-103EV Retractable Lanyard 102 5008-83RV Retractable Lanyard 102 5009-36 Figure 8 Rescue Strap 110, 128 5009E-36 Figure 8 Rescue Strap 110, 119, 128 5010 Personal Winch 112, 113 5013 Rope Grab 104, 122 502 Jumper Cable Bag 79 5032 Climber Insert 22 5032S Climber Insert 22 5034 Bucket Hook 67 50371U Buck Hook 118, 120, 122 5041 Tool Pouch 43 5058 Bucket Hook 67 506 Tool Bag 70 506P7-14 Tool Bag 70 5081R3 Jumper Bag 79 5134 Bucket Hook 67 5175 Bucket Hook 67 519 Glove Bag 77 5201-50 Retractable Lifeline 105 5203 Harness Beam 106 52032 Dual Harness Beam 106 5204 Buck Trainer 106 521 Glove Bag 77 5231 Sleeve Bag 78 526 Tower Beacon Carry Bag 79 5279 Carry All Belt 45 528 Sleeve Bag 78 5288 Nut & Bolt Bag 69 5295-BL Satchel 134 5296 Portfolio 134 5299 Nut & Bolt Bag 45, 69 5299-BR Nut & Bolt Bag 69 52993-BR Nut & Bolt Bag 45, 69 52994-BR Nut & Bolt Bag 69 5302 Nut & Bolt Bag 45, 69 5358 Bucket Hook 67 5389-60 Horizontal Lifeline System 130 5434 Bucket Hook 67 546716RD+H+Z BuckStop Dual Lanyard 100, 118, 119, 126 546716RDR+Z BuckStop Dual Lanyard 100, 118

Cat. No.

Description

Pg.

54V114+Z BuckStop 99 54V114.5+Z BuckStop 99 54V116S1 BuckStop 99 54V116+Z BuckStop 99 54V126+Z BuckStop 99 5555CT Carhart Jacket 133 5555WSA Carabiner 102 5555S1 Carabiner 102 5555S2 Carabiner 102 5555S3 Carabiner 102 5555SA Carabiner 102 5555W1 Carabiner 102 574 Staple Stick 56 574L Staple Stick 56 6VV114+Z Buck Arrest 99 6VV114.5+Z Buck Arrest 99 6VV116S2X6 Buck Arrest 99 6VV116S2X12 Buck Arrest 99 6VV116X6 Buck Arrest 99 6VV116X12 Buck Arrest 99 6VV116+Z Buck Arrest 99 6VV126+Z Buck Arrest 99 6007-164DV+Z Lightweight Retractable Lifeline 7, 105, 122, 126 6008-74+Y+4+Z BuckLimiter PFL 7, 127 6008-74+Y+TC+Z BuckLimiter PFL 7, 103, 118, 127 6008-74+Y+Y+Z BuckLimiter PFL 7, 103, 127 7, 103, 118, 127 6008-74+YV+Z BuckLimiter PFL 6008-74D+4+Z BuckLimiter PFL 7, 103, 127 6008-74DV+Z BuckLimiter PFL 103, 127 6009 Gaff Guard 25 60091 Gaff Guard 25 60092 Gaff Guard 25 60093 Gaff Guard 25 60094 Gaff Guard 25 6015 Saw Scabbard 60 6015C Saw Scabbard 60 60156C Pole Saw Scabbard 60 6016 Straight Blade Scabbard 60 6016C Straight Blade Scabbard 60 6017 Manual Pruner Guard 61 6017C Manual Pruner Guard 61 6019 Manual Pruner Guard 61 6019C Manual Pruner Guard 61 6020 Hydraulic Chainsaw Scabbard 61 6020C Hydraulic Chainsaw Scabbard 61 60212 Chainsaw Scabbard 61 60212C Chainsaw Scabbard 61 6022 Chainsaw Scabbard 61 6022C Chainsaw Scabbard 61 6025 Gaff Maintenance Kit 10, 26 6025C Gaff Maintenance Kit 10, 26 6027 Gaff Gauge Holder 26 6029 Single Edge Axe Cover 61 6029C Single Edge Axe Cover 61 60299 Double Edge Axe Cover 61 60299C Double Edge Axe Cover 61 603B3600 X’ Style Harness 89 603B700 X’ Style Harness 89 603E3600R3 X’ Style Harness 89 603E3700R3 X’ Style Harness 89 603P8Q8 X’ Style Harness 92, 124 603PQ10 Harness 124 603S8C600 X’ Style Harness 90 603S8C600K1 BuckFit FR Harness 91 603S8C600V9 BuckFit Harness 91 603S8C700 X’ Style Harness 90 603S8C700K1 BuckFit FR Harness 91 603S8C700V9 BuckFit Harness 91 6030 Single Edge Axe Cover 61 6030C Single Edge Axe Cover 61 6031 Hydraulic Pruner Guard 61 6031C Hydraulic Pruner Guard 61 6058 Smooth, Single Cut File 10, 26 6087 Sizing Belt 30 61 Step-SafeTM 118, 121, 126 6102 Wrench Keeper 38 6103 Thread Restorer 55 6104 Wrench Holder 38 61060 Thread Restorer 55 6107 Tape Thong 38 6109 Handline Carrier 38

137

Cat. No.

Description

Pg.

6142 Manhole Cover Hook 57 6150 Strand Wire Dispenser 56 61501 Strand Wire Dispenser 56 6160 Ground Rod Driver 57 61991 Body Belt Harness Combo 118, 123 61992 Body Belt Harness Combo 118, 120, 123 61995 Body Belt Harness Combo 125 61995K1 Body Belt Harness Combo 125 619891 Body Belt Harness Combo 118, 119, 123 61999 Body Belt Harness Combo 125 62005 Hydraulic Circle Saw Guard 61 62005C Hydraulic Circle Saw Guard 61 6203 Thread Restorer 55 62040 Thread Restorer 55 62070 Thread Restorer 55 6208 Straight Blade Scabbard 61 6208C Straight Blade Scabbard 61 6212 Thread Restorer 55 6217 Brush Axe Guard 61 6217C Brush Axe Guard 61 6221 Straight Blade Scabbard 61 6221C Straight Blade Scabbard 61 6222 Saw Scabbard 60 6222C Saw Scabbard 60 6223 Saw Scabbard 60 Saw Scabbard 60 6223C 6225-21 Bow Saw Blade Guard 61 6225-24 Bow Saw Blade Guard 61 6225-30 Bow Saw Blade Guard 61 6226 Saw Scabbard 60 6226C Saw Scabbard 60 62531 Gut Strap 37 6256 Gut Strap 37 6257 Gut Strap 37 6258 Suspenders 37 62583 Suspenders 37 6259 Suspenders 37 62593 Suspenders 37 6263 Man Rated Gut Strap 3, 37 6264 Man Rated Gut Strap 3, 37 6272 Gut Strap 37 628 Tool Pouch 44 6286 Telephone Installer Belt 45 6287 Industrial Carry Belt 45 62872 Industrial Carry Belt 45 62995 Body Belt Harness Combo 125 6303 Gaff Gauge 10, 16, 26 6303C Gaff Gauge - CCA 10, 16 6306 Tree Gaff Gauge 26 637G8C500CK1 BuckFit FR Harness 91 637G8C500CV9 BuckFit FR Harness 91 637G8C600K1 BuckFit FR Harness 91 637G8C600V9 BuckFit Harness 91 637G8C700K1 BuckFit FR Harness 91 637G8C700V9 BuckFit Harness 91 6381700 H’ Style Harness 88 6393500D1R3 H’ Style Harness 89 6383600 H’ Style Harness 89 6383700 H’ Style Harness 89 63936E00T2 H’ Style Harness 88 6393600 H’ Style Harness 89 63936Q Harness 114 6393700 H’ Style Harness 89 6394600 H’ Style Harness 90 6398C600 H’ Style Harness 90 6398C700 H’ Style Harness 90 64V114S2+Z Buck Arrest 99 64V114+Z Buck Arrest 99 64V114.5+Z Buck Arrest 99 64V116+Z Buck Arrest 99 64V126+Z Buck Arrest 99 6400 Staple Puller 56 6483600 H’ Style Harness 89 6483700 H’ Style Harness 89 6493500D1R3 H’ Style Harness 89 6493600K Kevlar Harness 90 6493600R3 H’ Style Harness 90 6493700K Kevlar Harness 90 6493700R3 H’ Style Harness 90 6494600 H’ Style Harness 90

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com


Cat. No.

Description

Pg.

6501 Finishing Hone 10, 26 6515 Saw Scabbard 60, 61 6515C Saw Scabbard 60, 61 6515CP Saw Scabbard 60, 61 6515CS Saw Scabbard 60 6515P Saw Scabbard 60, 61 65155 Saw Scabbard 60 65156C Saw Scabbard 60 65156C Pole Saw Scabbard 60 6517 Saw Scabbard 60 6517C Saw Scabbard 60 66 Burr & Barrell Nut Fastener Kit 42 68D7G8C600K1 BuckFit FR Harness 91 68D7G8C600V9 BuckFit Harness 92 68D7G8C700K1 BuckFit FR Harness 91 68D7G8C700V9 BuckFit Harness 92 68D98C600 H’ Style Harness 90 68D98C700 H’ Style Harness 90 68D98C74C0K4 H’ Style Harness 92, 118, 124 6909 Gaff Guard 25 6909A Gaff Guard 25 6909U Gaff Guard 25 694 Rescue Buck 80, 110 694F1 Buck Mix Rubber Pellets 80, 110 7+K+K4A1100 Rope 115 7V-4A150+Z Lifeline 104, 122 7V-4A1100+Z Lifeline 122 104 7V-8G150+Z Lifeline 7VV7A13B+4 Rebar Assembly 100 7003S Dual Rescue Strap 108, 129 7058 Pouch 55 7058CK Pouch with Knife & Scissors 55 7058J Pouch with Knife & Scissors 55 7059 Tool Pouch 55 7071 Goat Wrench 57 7075 Scissors 55 7080 Skinning Kinfe 54 70801 Skinning Kinfe 54 70802 Skinning Kinfe 54 70803 Skinning Kinfe 54 70804 Skinning Kinfe 54 7085 Scissors 55 7086 Skinning Kinfe 54 70861 Skinning Kinfe 54 70862 Skinning Kinfe 54 70863 Skinning Kinfe 54 70864 Skinning Kinfe 54 7088 Skinning Kinfe 54, 55 7089 Skinning Kinfe 54 70891 Skinning Kinfe 54 70892 Skinning Kinfe 54 70893 Skinning Kinfe 54 70894 Skinning Kinfe 54 7090 Skinning Kinfe 54 70901 Skinning Kinfe 54 70902 Skinning Kinfe 54 70903 Skinning Kinfe 54 70904 Skinning Kinfe 54 7091 Buck ErgoBlade 54 70911 Buck ErgoBlade 54 70912 Buck ErgoBlade 54 70913 Buck ErgoBlade 54 70914 Buck ErgoBlade 54 7095 BuckSkinner 54 70951 BuckSkinner Guard 54 72 Retrieval Yoke 112 77 Locking Snap Hook 52 8VV114+Z BuckYard 98 8VV114.5+Z BuckYard 98 8VV116S1X6 BuckYard 97, 98 8VV116S1X12 BuckYard 98 8VV116X6 BuckYard 98 8VV116+Z BuckYard 98 8VV714+Z BuckYard Stretch 98 8VV714.5+Z BuckYard Stretch 98 8VV716+Z BuckYard Stretch 98 8+66716D+J+6W4 Dual Shock Absorbing Lanyard 100 8+66716D+JW4 Dual Shock Absorbing Lanyard 100 80 Confined Space Retrieval Harness 112 81 Buck Diaper 109, 129

Cat. No.

Description

Pg.

81059 Climbers 13 84V114+Z BuckYard 98 84V114.5+Z BuckYard 98 84V116S1 BuckYard 98 84V116+Z BuckYard 98 84V116+Z BuckYard 118, 126 84V714+Z BuckYard Stretch 98 84V714.5+Z BuckYard Stretch 98 84V716S1 BuckYard Stretch 98 84V716+Z BuckYard Stretch 98 81429R Climbers 14 8451G7P5V Warning Flags & Markers 80 8451G7S Warning Flags & Markers 80 8452O3V Warning Flags & Markers 80 8453O1-45 Warning Flags & Markers 80 8453O1-50 Warning Flags & Markers 80 8454O3V Warning Flags & Markers 80 8455G7-45 Warning Flags & Markers 80 8455G7-50 Warning Flags & Markers 80 87479 Climbers 13 9+N08K15A2M4 Work Positioning Rope Lanyard 100, 118, 120, 126 9-8 BuckAdjuster 50 9009 Climber Gaff 15 9047 Climbers 13 9106 Climber Gaff 15 9109 Climber Gaff 15 13 91079 Climbers 9142NR Climbers 14 91429R Climbers 14 9202 Climber Sleeves 11, 26 9204 Climber Sleeves 11, 26 9206 Climber Gaff 15 9209 Climber Gaff 15 9215 Sleeve Fasteners 26 9218 Split Ring 26 930 Tool Pouch 44 9306 Climber Gaff 15 9309 Climber Gaff 15 931 Tool Pouch 44 9409 Climber Gaff 15 945 LEA Tool Pouch 44 949C Ballistic Tool Pouch 5, 44 9509 Climber Gaff 15 98479 Climbers 13 99E Locking Snap Hook 52 996 Sleeve Fasteners 26

Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425 www.buckinghammfg.com

138

Cat. No.

Description

Pg.


Buckingham Catalog  

Catalog created by Optica Networks