Page 1

Skycity Casino, Adelaide SA

Leva Umbrella Range

MakMax Architectural Umbrellas

CANTILEVER SUPPORT PERMANENT UMBRELLA The cantilevered pole on the Leva range of umbrellas allows for maximised use of space underneath the canopy. Ideal for applications where a central column is not practical, such as over a pool. The Leva is also perfect for alfresco dining applications, offering shelter without the need for a column through the table. » » » » »

Leva umbrella models are available in two sizes - 2.7m and 3.2m. Leva umbrellas are square. Wind rated to 120km/hr. Wall mounting, swivel boom and double canopy options available. Installed as a permanent umbrella, Leva canopies can be closed in the event of severe weather.

Design. Engineer. Fabricate. Install.


MakMax Leva Umbrella Range PROTECTING DURABLE LOW MAINTENANCE COST EFFECTIVE STYLISH FLEXIBLE

AESTHETICS & ACCESSORIES » Attention to detail in all aspects of product development means the finished product is architecturally pleasing and efficiently designed. » Range of colours, shapes, finishes, and branding possibilities. » Wide range of accessories available including; Heaters and misters. Lights and electrical connectivity. Guttering.

DESIGN & ENGINEERING » » » »

Leaders in outdoor umbrella design since 1985. All products are certified by a practicing and accredited structural engineer. Wind rated to suit location and wind category. (up to 44m/sec.) W Structural design is to AS/NZS1170.0, AS/NZ1170.1, AS/NZ1170.2, AS4100, A AS3600 and AS1170.4.

MEMBRANE

W

» The tensile membrane canopy is fabricated from long-life, 100% UV stablised, waterproof, architectural-grade PVC coasted polyester fabric W with a PVDF finish to both side. A

A

STEEL FRAME

W

» The structure employs tubular steel components finished with a fourA layer steel protection system. W » Choose from a wide range of steel powdercoat colours A » Standard, wall mounted, swivel/rotating boom or double boom columns are available W

HARDWARE

A

» Umbrellas canopy is tensioned with stainless steel under arm cables. » All hardware inclusive of nuts, bolts, washers, and rigging screws are stainless steel. » Arm end plugs are UV resistant nylon. » Top hats are spun aluminium with polyester powdercoat.

MANUFACTURE

» Complete manufacture and assembly in house means full control of product standards.

DELIVERY

» Capability to deliver product to any corner of the globe through an international network of affiliates. » Full service warranty and maintenance support.

CANOPY SHAPE

SQUARE

MODEL NAME / NUMBER

UMBRELLA SIZE

CANOPY COVERAGE

m

sqm

LEVA

LS27

2.7

5.8

LEVA

LS32

3.2

8.0

Fabric membrane (canopy)

Seam weld

Delta ring & sewn section

Sewn edge or cable edge Stainless steel cables & fittings

Base plate

Powder coat finish to frame

Hold down bolts

THE MAKMAX AUSTRALIA DIFFERENCE; » We provide you with an in-house engineering and design team. » Local manufacturing; our state-of-the-art fabrication facility is located at our Brisbane Headquarters. » A commitment to quality; ISO certification ISO 9001, ISO 14001, ISO 45001. » Over 30 year history in Australia, backed by over 90 year global history in tensile membrane.

Design. Engineer. Fabricate. Install. MakMax Australia 1300 625 629 | info@makmax.com.au | www.makmax.com.au June 2021

Profile for MakMax Australia

MakMax Leva Umbrella Specification Sheet  

The cantilevered pole on the Leva range of umbrellas allows for maximised use of space underneath the canopy. Ideal for applications where a...

MakMax Leva Umbrella Specification Sheet  

The cantilevered pole on the Leva range of umbrellas allows for maximised use of space underneath the canopy. Ideal for applications where a...

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded