Detailing & Working Drawings by Lum YuJoe 0338135

Semester 4

Detailing & Working Drawings IDS60804

E-Portfolio By : Lum YuJoe 0338135

Assignment 1 : Step on it Detailing & Working Drawings IDS60804

By : Lum YuJoe 0338135 Checked By : Ms Norji Nasir & Ar.Aziah Hassan

Chosen Staircase Description Oak wood riser, thread and skirting Iron railings with white paint coat Mahogany wood hand railings in lacquer finish"L" shaped stairs ( quarter turned stairs ) 2 landings, 1 at the start, 1 at the bend of the L Measurements Floor Opening : 2630 (W) x 4750 (L) Headroom : 2700 mm total rise : 3620 mm floor thickness : 680 mm run : 320 mm rise : 180 mm total run : 7180 mm stringer length : 5507 mm stringer height : 2880 mm Tread : 60 mm

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

Reflection After finishing assignment 1, I have learned the basic requirements to build a functioning and safe staircase, the type of staircases, the materials used to build staircases and most importantly the importance of constructing a proper staircase. I have also learnt about the ubbl, which is there to help guide us users and designers to properly design a staircase which will fulfill safety requirements. Also throughout the assignment I have learnt the importance of proper line weights in my CAD drawing as it helps the viewer differentiatie different segments and depths of the drawing and the importance of proper scaling for your drawing, as it helps the client or viewer to properly view certain details that otherwise cant be seen if its too small.

Assignment 2 : Cook & clean

IDS 60804 Detailing & working drawings

By : Lum YuJoe ( 0338135 ) Checked by : Ms Norji Nasir & Ar. Aziah Hassan

1.1 Best view of the kitchen and bathroom Kitchen

Bathroom

1.2 Residential type

Residential type : Gated double story semi-D residence Rooms : 4 bedrooms, 5 Bathroom Selected floor : Ground Floor Selected Area : Kitchen & Bathroom

DRY KITCHEN ( K_02 )

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

BATHROOM ( T_03 )

FP 01

WHOLE KITCHEN FLOOR PLAN SCALE 1:100

800(L)x450(W)x350(H)MM STAINLESS STEEL SINK

2900(L)x600(W)x1100(H) MM "L" SHAPED MARBLE COUNTER TOP

590(L)x360(H) MM ZANUSSI STEAM OVEN

600(L)x600(W) MM WHITE CERAMIC TILE IN POLISH FINISH

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

620(L)x715(W)x1670(H) MM ELECTROLUX FRIDGE 150 MM (THK) CONCRETE WALL IN WHITE PAINT FINISH

FP 02

DRY KITCHEN FLOOR PLAN SCALE 1:25

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

CERAMIC BASIN CERAMIC TOILET BOWL

150 MM (THK) CONCRETE WALL IN WHITE PAINT FINISH

440(W)x240(L)x450(H) MM STORAGE 700(W)x870(L) MM SMALL TINTED GLASS WINDOW 300(W)x300(L) MM CERAMIC TILES IN BROWN STONE TEXTURE FINISH THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

FP 03

BATHROOM FLOOR PLAN SCALE 1:25

DRY KITCHEN ( K_02 )

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

BATHROOM ( T_03 )

FP 01

REFLECTED CEILING PLAN SCALE 1:100

CL

150 MM (THK) CONCRETE WALL IN WHITE PAINT FINISH 420(L)x560(H) MM CABINET DOORS IN LIGHT BEIGE VENEER C/W ALUMINUM FINGER GROOVE 420(L)x650(H) MM CABINET DOORS IN LIGHT BEIGE VENEER C/W ALUMINUM FINGER GROOVE 1800(L)x1500(H) MM GLASS WINDOW C/W ALUMINUM FRAME

800(L)x420(W)x170(H) MM STAINLESS STEEL SINK C/W STAINLESS STEEL FAUCET DETAIL 1 DETAIL 2 150(H)MM ALUMINUM SKIRTING FROM GL TO CABINET

GL

SEC DRY KITCHEN SECTION 01 SCALE 1:25

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

CL 150 MM (THK) CONCRETE WALL IN WHITE PAINT FINISH 700(L)x850(H) MM GLASS WINDOW C/W WHITE ALUMINUM FRAME 1020(L)x2070(H) MM SLIDING DOOR FRAME C/W TRANSPARENT PLASTIC SHEET 200(L)x200(W) MM TEXTURED CERAMIC TILES IN WHITE POLISH FINISH 300(L)x300(W) MM BROWN CERAMIC TILES IN SAND BLAST FINISH

GL

640(H)x700(W) MM WATER CLOSET C/W STAINLESS STEEL BIDET DETAIL 3

SEC BATHROOM SECTION 02 SCALE 1:25

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

1140MM (L) X 2340MM (H) DOUBLE LEAF DOOR C/W DOUBLE WINDOWS

1660MM (L) x 1380MM (H) GLASS WINDOW C/W WHITE ALUMINUM FRAME

300(L)x300(W) MM WHITE CERAMIC TILE IN POLISH FINISH 800(L)x450(W)x350(H)MM STAINLESS STEEL SINK C/W STAINLESS STEEL FAUCET 40MM (THK) MARBLE COUNTER TOP IN POLISH FINISH 1200MM (W) x 210MM (H) DARK BROWN VENEER DRAWER C/W ALUMINUM FINGER GROOVE

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

150MM (H) ALUMINUM SKIRTING FROM GL TO CABINET

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

GL

410MM (L) X 670MM (H) CABINET DOOR IN DARK BROWN VENEER C/W ALUMINUM FINGER GROOVE

EL 02

DRY KITCHEN FLOOR PLAN SCALE 1:25

1800(L)x1500(H) MM GLASS WINDOW C/W ALUMINUM FRAME

40MM (THK) MARBLE COUNTER TOP

20MM (THK) CABINET DOORS IN DARK BROWN VENEER

STAINLESS STEEL FAUCET C/W STAINLESS STEEL HANDLE 800(L)x420(W)x170(H) MM STAINLESS STEEL SINK C/W STAINLESS STEEL DRAIN CAP INDUSTRIAL HOSE C/W STAINLESS STEEL VALVE 20MM IN DIAMETER WATER PIPE IN MATTE GREY FINISH

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

40MM IN DIAMETER WASTE WATER PIPE IN MATTE GREY FINISH

DT 01

SINK DETAIL 1 SCALE 1:5

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

20MM THK CABINET DOOR IN DARK BROWN VENEER C/W ALUMINUM FINGER GROOVE 20MM THK WOODEN BACKER BOARD IN WHITE PLASTIC COAT FINISH 20MM THK WOODEN BASE BOARD IN WHITE PLASTIC COAT FINISH 150(H)MM ALUMINUM SKIRTING FROM GL TO CABINET 600(L)x600(W) MM WHITE CERAMIC TILE IN POLISH FINISH

DT 02

FLOOR & SKIRTING DETAIL 2 SCALE 1:5

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

150 MM (THK) CONCRETE WALL IN WHITE PAINT FINISH

640(H)x700(W) MM WATER CLOSET C/W STAINLESS STEEL BIDET 300(L)x300(W) MM BROWN CERAMIC TILES IN SAND BLAST FINISH 100MM IN DIAMETER WASTE WATER PIPE IN MATTE GREY FINISH 40MM IN DIAMETER WATER PIPE IN MATTE GREY FINISH

DT 03

TOILET DETAIL 3 SCALE 1:5

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

LEGEND WATER METER METER READER

VALVE TAP

3 NOS 500 GALLONS KINGKONG STORAGE TANK ON CONCRETE PLINTH C/W PVC FLOAT

COLD WATER HOT WATER

850 PSI GAS WATER HEATER

30MM (DIA) UPC PIPE

25MM (DIA) UPVC PIPE THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

20MM (DIA) STAINLESS STEEL WATER PIPE

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

METER 30MM (DIA) STAINLESS STEEL INCOMING PIPE FROM WATER MAIN SYABAS

KITCHEN

BATHROOM

GRD FLOOR

UBBL Statements (3) The area & width of a residential building shall not be less than 4.5 square meters & 1.5 meters respectively The height of rooms in residential buildings other than shophouses shall be for kitchens, not less than 2.25 meters

For bathrooms, water-closets, balconies, garages and like shall not be be less than 2 meters

The surface of a wall or ceiling in a room, circulation space or protected shaft shall be a class of not lower than the specified as relevant in the Eight Schedules to these by law. ( A wall may have a surface not less than Class 3 in fire resistant )

Every water closet or bathroom shall be provided with natural lighting & ventilation by means of one or more openings having a total area of not less than 0.2 square meter per water closet and such openings shall be able to provide free & uninterrupted passage

UBBL Statements Every residential building & every floor of a residential building which is or may be separated let for dwelling purposes shall be provided with a kitchen having a properly constructed fireplace with a chimney may be required by the local authority Where permanent mechanical ventilation or air conditioning is intended the relevant buildings by laws relating to natural ventilation, natural lighting & heights of rooms may be waived at the discretion of the local authority Where permanent mechanical ventilation in respect of water closets, bathrooms or corridors is provided for a maintained in accordance with the requirement of the Third Schedule to these by law, relating to natural ventilation and natural lighting shall not apply to such waters closets, bathrooms or corridors Every room designed, adapted or used for residential business or other purposes except hospitals & schools shall be provided with natural lighting & natural ventilation by a means of having one or more windows with a total area of not less than 10% of the clear floor area of such room and shall have openings capable of allowing a free uninterrupted passage of air of not less than 5% of the floor area

Conclusion Based on the overall design of my kitchen and bathroom in my house. I would say that it is a well planned layout, as the spaces are all divided equally which is important for a proper amount of workspace to limit accidents happening.Ventilation throughout the area is also sufficient as large windows and openings can be found throughout the plan layout. The overall connectivity between both rooms are great as large corridors connect both the dry kitchen and bathroom together.

However if i were to choose certain flaws within my kitchen, it would be the limited amount of power sockets. Due to the high amount of appliances located in the kitchen, it would be reasonable to ask for more plugs in order to reduce the amount of appliances being moved around the kitchen. Secondly, the space where the dining table is located may be rather small, as my family consists of 5 people. I would suggest a larger space for a larger table and to allow an ample amount of space to move around and the table.

As for the bathroom, ventilation could be improved as there is only one window that allows natural ventilation to happen within the toilet. Also storage within the bathroom is also limited as there is little to no space to store additional goods such as toilet papers & shampoos. Also improving the lighting within the bathroom could be done as the downlight uses yellow coloured bulbs, and it would be better to use a cool white bulb to better light up the space.

In conclusion the space is fully functional and utilized throughout my 5 years staying here. I believe by implementing the suggestion above can help improve and maximise the availability of the space located within my house.

Reflection Overall I have learnt alot about my kitchen and bathroom, such as how to choose suitable materials for the walls and floors to suit the ubbl standards. I also learnt the importance of proper space planning in the kitchen plan because of how much ample amount of space is needed within the kitchen.Measuring the space was a little tedious but nonetheless it teached me the standard measurements of certain objects such as the thickness of table tops, cupboard skirtings and much more. Lastly i feel that what's most important in a space is the lighting as it helps bring out the characteristics design within the space showing the owner the true potential of the space given.

DETAILING & WORKING DRAWING MODULE - IDS 60804 ( Assignment 3 ) By - Lum YuJoe - 0338135

Drawing Sheet list 1. Setting out plan - DWG_DWD_NN_GF_ST_01 2. Furniture Layout Plan - DWG_DWD_NN_GF_FP_02 3. Reflected Ceiling Plan - DWG_DWD_NN_GF_RCP_03 4. Floor Finishes Plan - DWG_DWD_NN_GF_FFP_04 5. Section Drawing - DWG_DWD_NN_GF_SC_05 6. Bespoke Details (Flexible Stall) - DWG_DWD_NN_GF_FS_06a - 06e 7. Bills Of Quantities (Flexible Stall) - DWG_DWD_NN_BQ_07 8. Single line drawing (Water Supply) - DWG_DWD_NN_WS_08

1

2

3

4

5

8

7

6

9

10

11

ALL DIMENSIONS SHOWN ARE TO CROSS CHECK WITH SITE CONDITIONS AND THE CONTRACTORS ARE RESPONSIBLE TO HIGHLIGHT AND DISCREPANCIES TO THE SUPERVISING ARCHITECTURE,DESIGNER BEFORE ANY WORK IS CARRIED OUT.

DATE

NO.

AMENDMENTS

D3 PROJECT TITTLE : TO PROPOSE STAIRCASE DESIGN FOR THE DOUBLE-STOREY TERRACE HOUSE AT 19, JALAN PRIMA 24, TAMAN PUCHONG PRIMA, 47150 PUCHONG, SELANGOR.

A D2

D3

D2

CONSULTANT : MITRAJAYA SDN. BHD. No. 9. Block D, Pusat Pendagangan Puchong Prima, Persiaran Prima Utama, Taman Puchong Prima,, 47190 Puchong, Selangor t 03-6060-7394 e: mhb@mitrajaya.com.my

B C CONSULTANT :

D1

NAGANO HOLDINGS SDN. BHD. ZIP-09, Zest Point, BK 9, Bandar Kinana, Exit Lebuhraya Bukit Jalil, Puchong, 47180 Puchong, Selangor t 03-8080 1151 e: admin@naganoholdings.com

D CONSULTANT :

MEGAJUTA HOLDINGS 2-2, Jln Puteri 94, Bandar Puteri, 47100 Puchong, Selangor t 03-6066 8017 e: Malcontractor@megajuta.com.my

D1

E

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

F

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

DRAWING TITTLE :

SETTING OUT PLAN

G

SCALE :1:25

DATE : 19 OCTOBER 2020

DRAWN BY : LUM YUJOE LEGEND NEW ADDITION DEMOLITION

DWG_DWD_NN_GF_ST_01 D1

1000(L) x 2400(H) mm CENTER PIVOT DOOR

D2

1000(L) x 2400(H) mm SINGLE SWING DOOR

D3

2000(L) X 2400(H) mm DOUBLE SWING DOOR

1

2

4

3

5

6

7

8

9

A F6 LEGEND

F7

B

F1

400MM(W) X 1600MM (L) X 2500MM (H) PORTABLE STEEL FRAMED STALL COME WITH WOODEN SHELVES IN CLEAR COAT FINISH

F2

400MM(W) X 1600MM (L) X 2000MM (H) PORTABLE STEEL FRAMED STALL COME WITH STEEL HANGING RACK IN BLACK PAINT FINISH

F3

1950MM(W) X 700MM (L) X 900MM (H) PORTABLE WOODEN VEGETABLE DISPLAY IN CLEAR COAT FINISH

F4

580MM(W) X 3700MM (L) X 1050MM (H) WOODEN COUNTER WITH MARBLE TABLE TOP FINISH IN GLOSS FINISH

F5

720MM(W) X 2000MM (L) X 900MM (H) WOODEN CONCIERGE COME WITH MARBLE TABLE TOP IN GLOSS FINISH

F6

1200MM(W) X 3600MM X 900MM (H) WOODEN COUNTER IN POLISH DECORATED TILE COME WITH MARBLE COUNTER TOP IN POLISH FINISH

F5

450MM(W) X 1800MM X 900MM (H) WOODEN WORKSPACE IN CLEAR COAT FINISH

F5

C F1

F3

F1

F3

F1

F2

F3

D F4 UP

E F

G

F1

F2

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

1

2

3

4

5

6

A

B C

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

D

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

UP

E

SYMBOLS

DESCRIPTIONS

QTY

200MM (DIA) ALUMINUM CIRCLE DOWNLIGHT IN CHROME FINISH

20

353MM(W) X 3380MM (L) PLANTER BOX WITH SMALL SPOTLIGHTS

4

90MM(W) X 2550MM (L) YELLOW LED STRIPS

12

1

2

3

4

5

6

7

8

9

A

B C

D UP

E F

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

G

LEGEND 500MM(W) X 500MM (L) WHITE CERAMIC TILES IN GLOSS FINISH 38MM(W) X 184MM (L) DARK SPRUCE WOOD PLANKS IN CLEAR COAT FINISH 500MM(W) X 500MM (L) DECORATED CERAMIC TILES IN MATTE FINISH POLISH CONCRETE FINISH

A

B

C

D

E

IRON RAILING

FL

STAIRCASE

CONCRETE FLOORING IN POLISH FINISH FLEXIBLE STALL A FLEXIBLE STALL B GLASS WALL WITH BLACK CHROME ANODIZE FRAME

GL

ENTRANCE WATER COLUMN WITH GLOSS DECORATED TILES

CONCRETE FLOORING IN POLISH FINISH

SEC SECTION 1-1 1-1 SCALE 1:75

THIS DRAWING IS COPYRIGHT. All design are the property of INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the proper HQ INDESIGN Sdn. Bhd. and shall be returned on the completi of the work.

All measurements must be checked at the site by the contractor notification to be made to the Designer before commencement o work in the event of any discrepancy arising from the drawings. drawings must be read in conjunction with other consultant's drawings.

ST1 50MM (THK) STAINLESS STEEL FRAME IN BLACK CHROME ANODIZE FINISH W1

1490MM (L) X 290MM (H) X 20MM (THK) DARK OAK VENEER CHALK BOARD

W2 1500MM (L) x 300MM (W) X 300MM (H) LIGHT OAK STORAGE CABINET IN CLEAR COAT FINISH

P1 600MM (L) X 300MM (W) 140MM (H) MODULAR PLASTIC DISPLAY BOX IN GREEN MATTE FINISH

270MM (W) X 90MM (H) X 20MM (THK) DARK OAK VENEER FARMED CHALK BOARD

W2

375MM (L) X 300MM (W) X 480MM (H) EACH LIGHT OAK VENEER STORAGE CASING IN CLEAR COAT FINISH C/W PLASTIC STORAGE BIN

ST1 50 MM (DIA) STAINLESS STEEL WHEEL IN BLACK CHROME ANODIZE FINISH C/W RUBBER THREAD AND BREAKS

ISO STALL ISOMETRIC VIEW SCALE 1:20 1

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

ST1 50MM (THK) STAINLESS STEEL FRAME IN BLACK CHROME ANODIZE FINISH TIG WELDED AND MADE GOOD

W2 20MM (THK) X 1500MM (L) LIGHT OAK VENEER BARRIER IN CLEAR MATTE COAT FINISH

P1 300MM (W) X 600MM (L) MODULAR PLASTIC DISPLAY BOX IN GREEN MATTE FINISH

W1 270MM (L) x 20MM (THK) DARK OAK VENEER CHALK BOARD

W2 300MM (W) X 1500MM (L) x 30MM (THK) LIGHT OAK VENEER BASE IN CLEAR MATTE COAT FINISH

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

P PLAN OF FLEXIBLE STALL FSD SCALE 1:20

ST1 50MM (THK) STAINLESS STEEL FRAME IN BLACK CHROME ANODIZE FINISH TIG WELDED AND MADE GOOD

W1 1490MM (W) X 290MM (H) DARK OAK VENEER CHALK BOARD P1

600MM (W) X 140MM (H) MODULAR PLASTIC DISPLAY BOX IN GREEN MATTE FINISH W1 270MM (W) X 90MM (H) DARK OAK VENEER FRAMED CHALK BOARD W2

[1500MM (W) X 200MM (H) LIGHT OAK VENEER BARRIER IN CLEAR MATTE COAT FINISH W2

375MM (W) X 480MM (H) LIGHT OAK VENEER REMOVABLE STORAGE IN CLEAR COAT FINISH C/W RUBBER EDGE STOPPER ST2 20MM (W) X 80MM (H) STAINLESS STEEL WHEEL IN MATTE BLACK FINISH C/W RUBBER TREAD

ELE ELEVATION OF FLEXIBLE STALL Z SCALE 1:20

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

ST1 50MM (THK) STAINLESS STEEL FRAME IN BLACK CHROME ANODIZE FINISH STALL DETAIL 1 W2

750MM (W) X 300MM (H) LIGHT OAK STORAGE CABINET IN CLEAR COAT FINISH W2

1500MM (W) X 200MM (H) LIGHT OAK VENEER BARRIER IN CLEAR MATTE COAT FINISH

P1

600MM (W) X 140MM (H) MODULAR PLASTIC DISPLAY BOX IN GREEN MATTE FINISH

P1

250MM (W) X 430MM (H) PLASTIC STORAGE IN GREEN MATTE FINISH W2 375MM (W) X 480MM (H) LIGHT OAK VENEER STORAGE CASING IN CLEAR COAT FINISH

SC SECTION X-X Y-Y SCALE 1:20

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

50MM (THK) STAINLESS STEEL FRAME IN BLACK CHROME ANODIZE FINISH

TIG WIELDING FOR ENTIRE FRAME

20MM (THK) LIGHT OAK TIMBER PLANK IN CLEAR COAT FINISH

2MM (THK) ADHESIVE LAYER TO SECURE CUPBOARD TO FRAME

20 MM (THK) STAINLESS STEEL SCREW

50 MM (THK) LIGHT OAK TIMBER TO SUPPORT CUPBOARD IN CLEAR COAT FINISH C/W DOOR HINGES TO BE INSTALLED STAINLESS STEEL DOOR HINGE IN MATTE SILVER FINISH C/W SCREWS

DT FLEXIBLE STALL DESIGN 1 SCALE 1:5

40 MM (L) INSTALLED FLUSH WITH BASE STAINLESS STEEL SCREW

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

TIG WIELDING FOR ENTIRE FRAME

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

THIS DRAWING IS COPYRIGHT. All design are the property of HQ INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the property of HQ INDESIGN Sdn. Bhd. and shall be returned on the completion of the work.

All measurements must be checked at the site by the contractor and notification to be made to the Designer before commencement of work in the event of any discrepancy arising from the drawings. All drawings must be read in conjunction with other consultant's drawings.

3 NOS 500 GALLONS KINGKONG STORAGE TANK ON CONCRETE PLINTH C/W PVC FLOAT

SL

GREEN THUMB WORKSHOP

WB

FL

20MM (DIA) STOP COCK 1800MM HT. FROM GROUND LEVEL

WB

WB

MASAK MASAK AMPHITHEATER

WB

WB

40MM (DIA) UPVC SCOUR PIPE

SALAD BAR

WB M

GL

WB

WB

MARKET SPACE

WB

WB

WF

THIS DRAWING IS COPYRIGHT. All design are the property of INDESIGN Sdn. Bhd. and cannot be used without their written permission. All prints, specification and copyright are the proper HQ INDESIGN Sdn. Bhd. and shall be returned on the completi of the work.

20 MM (DIA) STAINLESS STEEL INCOMING PIPE FROM WATER MAIN SYABAS

All measurements must be checked at the site by the contractor notification to be made to the Designer before commencement o work in the event of any discrepancy arising from the drawings. drawings must be read in conjunction with other consultant's drawings.

SYMBOL

M WB WF

WS WATER SUPPLY DIAGRAM TO ZONE C A

DESCRIPTION METER

QTY 1

WATER BASIN

10

WATER FILTER

1

VALVE

18

SYABAS WATER METER

1

5 UBBL REQUIRMENT RELATED TO DESIGN PROPOSAL ACT 106 - In any staircase, the rise of it shall not be more than 180mm and the read shall not less than 255mm Act 4 - the minimum headroom of any habitable room or space inside any building shall be 2 meters Act 234 - Every room designed, adapted or used for residential business or other purposes except hospitals &schools shall be provided with natural lighting & natural ventilation by a means of having one or more windows with a total area of not less than 10% of the clear floor area of such room and shall have openings capable of allowing a free uninterrupted passage of air of not less than 5% of the floor area Act 166 - Except as permitted by-law 167 not less than two separate exits shall lie provided from each story together with such additional exits as may be neccessary Act 231 - The surface of a wall or ceiling in a room, circulation space or protected shaft shall be a class of not lower than the specified as relevant in the Eight Schedules to these by law. ( A wall may have a surface not less than Class 3 in fire resistant )

Reflection During this assignment I've learnt that it is very important to have a proper set of working drawings for your site and proposed flexible stall design. Because the layman who is incharge of constructing the space will have to build it according to your drawings. I also learnt that the grid line plays an important role during the construction phase as it acts as a guideline for where inbuilt furniture and features are to be built. I've also learnt about the pricing of raw materials and the importance of choosing the right type of material for your proposed design. Because we as designers are designing for our clients and to ensure that the designs costs fall within the client's budget. Also materials play a very important role in your designed space, as it can totally change the vibe and atmosphere within. I tried to incorporate what I've learnt in my design by mixing the coolness of the metal and the warmth of the sunlight reflecting off the wood. Overall, this assignment was a great eye opener for me as it also prepares me for my internship early next year.