Workplace Construction Documents

PLAN SHEET INDEX IA000 - COVER SHEET IA100 - FIRE & LIFE SAFETY PLAN (1ST FLOOR) IA101 - FIRE & LIFE SAFETY PLAN (2ND FLOOR) IA102 - FLOOR PLAN (1ST FLOOR) IA103 - FLOOR PLAN (2ND FLOOR) IA200 - REFLECTED CEILING PLAN (1ST FLOOR) IA201 - REFLECTED CEILING PLAN (2ND FLOOR) IA300 - BUILDING SECTIONS IA301 - INTERIOR ELEVATIONS IA302 - DETAIL DRAWING (MILLWORK ELEV, MILLWORK SECT, ETC.)

INTERIOR ELEVATION

IA400 - ENLARGED RESTROOM PLAN, ELEV, TYPICAL ADA DIAGRAMS, ETC. IA600 - FURNITURE PLANS LEVEL 1 KEY PLAN

IA700 - FINISH PLANS IA800 - ELECTRICAL PLAN / POWER / COMMUNICATION PLANS IA900 - PERSPECTIVES (NOT RENDERED)

PROJECT SQUARE FOOTAGE 1ST FLOOR BUSINESS (B) - SQ FT ASSEMBLY (A2) - SQ FT ASSEMBLY (A3) - SQ FT TOTAL SQ. FT. = 7,666 SQ. FT

2ND FLOOR BUSINESS (B) - SQ. FT ASSEMBLY (A2) - SQ. FT ASSEMBLY (A3) - SQ. FT. TOTAL SQ. FT. = 7,666 SQ. FT

LEVEL 2 KEY PLAN

INTERIOR RENOVATIONS

VICINITY MAP SYMBOL KEY PROJECT SITE SECTION SYMBOL

COVER PAGE

ELEVATION SYMBOL ROOM NUMBER

COLUMN SYMBOL

Project number Date Drawn by Checked by

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA000 Scale

2/28/2020 7:18:43 PM

ROOM NAME

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

EXIT EXIT OFFICE 112

TOTAL TRAVEL DISTANCE = 147'

MAIL ROOM 110

OFFICE 111

IT SERVER 109

10' - 0"

OFFICE 113 MECH. ROOM 118

95 '

-4

5/3 2"

SYMBOL KEY

ELECTRICAL ROOM 108

SECTION SYMBOL

OFFICE 114

UP

ELEVATION SYMBOL

JANITOR CLOSET 107

EXIT

10' - 0"

8' - 0"

ROOM NUMBER ROOM NAME COLUMN SYMBOL

12

7' -

OFFICE 115 11

3/

32 "

10' - 0"

OPEN OFFICE 117

MEN'S RESTROOM 106

LIFE SAFETY SUMMARY OCCUPANCY LOAD OFFICE 116

BUSINESS (B OCCUPANCY):

EXIT

10' - 0"

SQ. FT. (BUSINESS USE)

RECEPTION / LOBBY 100

EXIT

2E

BUSINESS

BF

MAXIMUM ALLOWABLE DISTANCE - 300' MAXIMUM PROVIDED TRAVEL DISTANCE 1 - 132' 8" MAXIMUM PROVIDED TRAVEL DISTANCE 2 - 82' 5" MAXIMUM PROVIDED TRAVEL DISTANCE 3 - 69' 8" MAXIMUM ALLOWABLE DEAD END CORRIDOR LENGTH - 50' MINIMUM ALLOWABLE AISLE WIDTH - 44" EGRESS WIDTH PER PERSON SERVED - .2" (.2 INCHES x 63 OCCUPANTS = 12.6 IN REQUIRED

CONFERENCE ROOM 102

62/48G E1353.48E 62/48G

INTERIOR RENOVATIONS

MEANS OF EGRESS

2E

E1353.48E

WAITING AREA 101

BF

BF

BF

ASSEMBLY (A-2)

BF

BREAKROOM 104

= 19 OCCUPANTS (1 PER 15 NET SQ. FT)

MEANS OF EGRESS

IA302

BF

BF

BF 6

= OCCUPANTS (1 PER 15 NET SQ. FT)

TOTAL OCCUPANTS = 163 4

62/48G

ASSEMBLY (A-2 ASSEMBLY): SQ. FT. (A-2 USE - BREAKROOM)

SQ. FT. (A-3 USE - CONF. ROOM)

HUMAN RESOURCE 103

62/48G

= 22 OCCUPANTS (1 PER 100 SQ. FT)

ASSEMBLY (A-3 ASSEMBLY):

TOTAL TRAVEL DISTANCE = 123' 6"

EXIT

WOMEN'S RESTROOM 105

PER FLORIDA BUILDING CODE (6TH EDITION)

MAXIMUM ALLOWABLE DISTANCE - 300' MAXIMUM PROVIDED TRAVEL DISTANCE MAXIMUM ALLOWABLE DEAD END CORRIDOR LENGTH - 50' MINIMUM ALLOWABLE WIDTH - 44" EGRESS WIDTH PER PERSON SERVED - .2" (.2 INCHES x 38 OCCUPANTS = 7.6 IN REQUIRED MEANS OF EGRESS

Fire & Life Safety Plan (1st Floor)

1st Life Safety Plan 1 3/16" = 1'-0"

MAXIMUM ALLOWABLE DISTANCE - 300' MAXIMUM PROVIDED TRAVEL DISTANCE MAXIMUM ALLOWABLE DEAD END CORRIDOR LENGTH - 50' MINIMUM ALLOWABLE WIDTH - 44" EGRESS WIDTH PER PERSON SERVED - .2" (.2 INCHES x 62 OCCUPANTS = 7.6 IN REQUIRED

Project number Date Drawn by

TRAVEL DISTANCE

Checked by

COMMON PATH -

Scale

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA100 3/16" = 1'-0"

2/28/2020 7:18:51 PM

ASSEMBLY (A-3) UP

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

6 IA302

EXEC OFFICE 207 5' - 8 13/32"

BREAKROOM 206

EXEC OFFICE 208

EXIT

LAWYER 210

SYMBOL KEY

SECTION SYMBOL FILE ROOM 205 DN

ELEVATION SYMBOL ROOM NUMBER

LAWYER 216

LAWYER 211

CORR.

MEN'S RESTROOM 204

12

7'

EXIT CORR.

" -2

LIFE SAFETY SUMMARY

CORRIDOR

LAWYER 217

ROOM NAME COLUMN SYMBOL

LAWYER 212

LAWYER 213

OCCUPANCY LOAD

4' - 0 11/16"

CONF. ROOM 209

PER FLORIDA BUILDING CODE (6TH EDITION)

BUSINESS (B OCCUPANCY): SQ. FT. (BUSINESS USE)

214 LAWYER

TOTAL TRAVEL DISTANCE = 84'

' 88

= 22 OCCUPANTS (1 PER 100 SQ. FT)

ASSEMBLY (A-2 ASSEMBLY): SQ. FT. (A-2 USE - BREAKROOM)

" -7

= OCCUPANTS (1 PER 15 NET SQ. FT)

ASSEMBLY (A-3 ASSEMBLY): SQ. FT. (A-3 USE - CONF. ROOM)

= 19 OCCUPANTS (1 PER 15 NET SQ. FT)

TOTAL OCCUPANTS = 163 215 LAWYER

MEANS OF EGRESS

BUSINESS

OPEN OFC 218

MAXIMUM ALLOWABLE DISTANCE - 300' MAXIMUM PROVIDED TRAVEL DISTANCE 1 - 83' 10" MAXIMUM PROVIDED TRAVEL DISTANCE 2 - 83' 11" MAXIMUM ALLOWABLE DEAD END CORRIDOR LENGTH - 50' MINIMUM ALLOWABLE AISLE WIDTH - 44" EGRESS WIDTH PER PERSON SERVED - .2" (.2 INCHES x 63 OCCUPANTS = 12.6 IN REQUIRED

INTERIOR RENOVATIONS

-0

"

WOMEN'S RESTROOM 203

TOTAL TRAVEL DISTANCE = 84'

4'

MEANS OF EGRESS

ASSEMBLY (A-2) CFO OFFICE 201

BF

COPY / PRINT 202

MAXIMUM ALLOWABLE DISTANCE - 300' MAXIMUM PROVIDED TRAVEL DISTANCE MAXIMUM ALLOWABLE DEAD END CORRIDOR LENGTH - 50' MINIMUM ALLOWABLE WIDTH - 44" EGRESS WIDTH PER PERSON SERVED - .2" (.2 INCHES x 38 OCCUPANTS = 7.6 IN REQUIRED MEANS OF EGRESS

EXIT

4 CFO Office

2nd Life Safety Plan 3/16" = 1'-0"

MAXIMUM ALLOWABLE DISTANCE - 300' MAXIMUM PROVIDED TRAVEL DISTANCE MAXIMUM ALLOWABLE DEAD END CORRIDOR LENGTH - 50' MINIMUM ALLOWABLE WIDTH - 44" EGRESS WIDTH PER PERSON SERVED - .2" (.2 INCHES x 62 OCCUPANTS = 7.6 IN REQUIRED

Project number Date Drawn by

TRAVEL DISTANCE

Checked by

COMMON PATH -

Scale

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA101 3/16" = 1'-0"

2/28/2020 7:19:01 PM

ASSEMBLY (A-3)

DN

1

Fire & Life Safety Plan (2nd Floor)

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

62' - 1 13/32"

5' - 0"

1

3

114 OFFICE

26' - 11 7/16"

34' - 2 13/32"

10' - 0" TYP

.5 6°

IA301 2 HR & Breakroom

116 OFFICE

5

4' - 0 19/32"

16' - 10 9/32"

11' - 7 1/4"

105 WOMEN'S RESTROOM

13' - 1 7/8"

24' - 5 11/16"

115 OFFICE

83

92.

78°

6

UP

2" 1/3

5

7' - 0"

ALIGN FINISHES

23

106 MEN'S RESTROOM

16'

15' - 10 9/32"

IA300

IA301

IA301

RECEPTION / LOBBY 100

104 BREAKROOM

SEMI- RECESSED FIRE EXTINGUISHER CABINET AND FIRE EXTINGUISHER. MOUNT AT TOP AT +54" A.F.F. FIRE EXTINGUISHER TO HAVE MIN. RATING OF 4A20BC FOR EVERY 3000 SQ. FT. OF FLOOR AREA. TRAVEL DISTANCE TO AN EXTINGUISHER SHALL NOT EXCEED 75 FT. ALL EXTINGUISHERS SHALL BE CONSPICUOUSLY LOCATED AND READILY ACCESSIBLE. THE TOP OF THE EXTINGUISHER SHALL NOT BE MORE THAN 5' 0" ABOVE THE FLOOR AND BOTTOM OF THE EXTINGUISHER SHALL NOT BE LESS THAN 4" ABOVE THE FLOOR.

6

STANDARD AND ADA DRINKING FOUNTAINS. SEE PLUMBING PLANS

7

NEW JANITOR MOP SINK. DRY WALL CONTRACTOR TO PROVIDE FIBERGLASS REINFORCED PANELS BEHIND SINK. PROVIDE 30" LONG FLEXIBLE HOSE AND HOSE CLAMP. SEE PLUMBING DRAWINGS

8

WATER HEATER LOCATION. SEE PLUMBING DRAWINGS

9

FIRE WALL - 1 HR

1

ELEVATION SYMBOL

18' - 7 21/32"

ROOM NAME

20' - 2 1/4"

11' - 4 13/16"

IA400 3

DISHWASHER BY TENANT. SEE PLUMBING DETAILS

5

ROOM NUMBER

18' - 6 19/32"

F2 1

ABOVE COUNTER MICROWAVE BY TENANT. VERIFY ELEMENTS REQUIRMENTS

4

SECTION SYMBOL

F1

2

REFRIGERATOR / FREEZER PROVIDED BY TENANT. VERIFY ELEMENTS REQUIRMENTS

3

SYMBOL KEY

7' - 0"

F2

2

50' - 10 1/4"

117 OPEN OFFICES

PLAN NOTES BUILT- IN LOCATIONS 1

Reception / Waiting Area

107 JANITOR'S CLOSET

7

113 OFFICE

9

1st Floor 21' - 11 5/16" Offices

8' - 0"

8' - 2 7/8" 8' - 0" 108 8 ELECTRICAL CLOSET

12' - 6"

23' - 1 19/32"

109 8' - 0" IT SERVER

5' - 0"

DIMENSIONS ON ENLARGED PLAN

12' - 5 1/4"

118 MECH ROOM

36' - 4 3/8"

5' - 0"

5' - 0"

4' - 10 5/8"

112 OFFICE

14' - 8 15/16"

17' - 7 7/16"

111 OFFICE

110 MAIL ROOM

12' - 10 9/32"

13' - 11 1/16"

11' - 11 7/8"

10' - 7 1/16"

103 HUMAN RESOURCE

COLUMN SYMBOL

102 CONFERENCE ROOM

101 WAITING AREA

FINISH LEGEND 22' - 5 9/32" UP

-

25' - 0 13/16"

---

26' - 8 7/32"

WALL MOUNTED / INTEGRATED INTO THE WALL

1

1st Floor Plan 1/8" = 1'-0"

---

TITLE

SYMBOL

EXTERIOR WALLS

W1

INTERIOR PARTITION

W2

MATERIAL PLYWOOD, SHEATHING; INSULLATION; METAL STUD LAYER

INTERIOR RENOVATIONS

MARBLE FINISH

CURTAIN WALL

W3

GLASS

INTERIOR WALLS

W4

GYPSUM BOARD

DIRTT OFF. WALLS

W5

THERMOFOIL - MATTE LUXE WHITE

Floor Plan (1st Floor)

Project number Date Drawn by Checked by

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA102 Scale

1/8" = 1'-0"

2/28/2020 7:19:12 PM

23' - 8 15/16"

48' - 3 1/8"

24' - 11 15/32" 26.20째

F2

6

12' - 10 9/32"

13' - 7 15/32"

0째 153.8

1

207 EXEC. OFFICE

13' - 1 15/16"

13' - 6 25/32"

4

13' - 11 1/8"

F1

IA302 15' - 11 1/2"

11' - 11 7/8"

208 EXEC. OFFICE

CORR.

9 21' - 5 13/32"

10' - 0"

CORR.

213 LAWYER Lawyer IA301

214 LAWYER

2' - 8 3/4"

209 CONF. ROOM 28' - 10 11/32"

5' - 4"

10' - 0"

2nd Floor Conference Room

217 LAWYER 10' - 0"

3

7' - 8"

F1

203 WOMEN'S RESTROOM

215 LAWYER

TV WALL MOUNTED / INTEGRATED INTO THE WALL

2

REFRIGERATOR / FREEZER PROVIDED BY TENANT. VERIFY ELEMENTS REQUIRMENTS

3

ABOVE COUNTER MICROWAVE BY TENANT. VERIFY ELEMENTS REQUIRMENTS

4

DISHWASHER BY TENANT. SEE PLUMBING DETAILS

5

SEMI- RECESSED FIRE EXTINGUISHER CABINET AND FIRE EXTINGUISHER. MOUNT AT TOP AT +54" A.F.F. FIRE EXTINGUISHER TO HAVE MIN. RATING OF 4A20BC FOR EVERY 3000 SQ. FT. OF FLOOR AREA. TRAVEL DISTANCE TO AN EXTINGUISHER SHALL NOT EXCEED 75 FT. ALL EXTINGUISHERS SHALL BE CONSPICUOUSLY LOCATED AND READILY ACCESSIBLE. THE TOP OF THE EXTINGUISHER SHALL NOT BE MORE THAN 5' 0" ABOVE THE FLOOR AND BOTTOM OF THE EXTINGUISHER SHALL NOT BE LESS THAN 4" ABOVE THE FLOOR.

6

STANDARD AND ADA DRINKING FOUNTAINS. SEE PLUMBING PLANS

7

NEW JANITOR MOP SINK. DRY WALL CONTRACTOR TO PROVIDE FIBERGLASS REINFORCED PANELS BEHIND SINK. PROVIDE 30" LONG FLEXIBLE HOSE AND HOSE CLAMP. SEE PLUMBING DRAWINGS

8

WATER HEATER LOCATION. SEE PLUMBING DRAWINGS

9

FIRE WALL - 1 HR

15' - 6"

SYMBOL KEY

.8 137

16' - 11 1/4"

PLAN NOTES BUILT- IN LOCATIONS 1

4째

201 CFO OFFICE

10' - 7"

3' - 0"

1 IA400

.8 137

218 OPEN OFFICE

14' - 8 13/16"

10' - 0"

202 COPY / PRINT 15' - 2 3/4"

12' - 0"

11' - 7 7/32"

12' - 0"

IA400

212 LAWYER

6' - 11 7/8"

CORRIDOR

4

6' - 11 7/8"

211 LAWYER

4' - 11 7/8"

204 MEN'S RESTROOM

6

18' - 0 11/16"

216 LAWYER

16' - 5 29/32"

DRINKING FOUNTAINS

3

13' - 5 7/8"

DIMENSIONS IN ENLARGED PLAN

12' - 0"

12' - 0"

DN

24' - 4 1/4"

IA300

210 LAWYER

9 4' - 0"

3' - 0"

13' - 5 7/8"

5' - 0"

2

205 FILE ROOM

11' - 10 1/32"

18' - 6 1/4"

206 BREAKROOM

16' - 11 1/4"

IA300

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

F1

SECTION SYMBOL

4째

24' - 6 29/32"

9' - 1 21/32"

ELEVATION SYMBOL

4 CFO Office

DN 25' - 0 1/4"

ROOM NUMBER IA301

-

ROOM NAME

---

1

2nd Floor Plan 1/8" = 1'-0"

COLUMN SYMBOL

22' - 11 3/4"

INTERIOR RENOVATIONS FINISH LEGEND TITLE

SYMBOL

EXTERIOR WALLS

W1

INTERIOR PARTITION

W2

MATERIAL PLYWOOD, SHEATHING; INSULLATION; METAL STUD LAYER

Floor Plan (2nd Floor)

MARBLE FINISH

CURTAIN WALL

W3

GLASS

INTERIOR WALLS

W4

GYPSUM BOARD

DIRTT OFF. WALLS

W5

THERMOFOIL - MATTE LUXE WHITE

Project number Date Drawn by Checked by

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA103 Scale

1/8" = 1'-0"

2/28/2020 7:19:17 PM

16' - 2 1/16"

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

6

EXIT IA302 2

111 OFFICE

IA302 110 MAIL ROOM

6' - 0"

2' - 0"

118 MECH ROOM 113 OFFICE

1st Floor Offices

4' - 0" 109 IT SERVER 108 ELEC ROOM

3' - 0"

2' - 0"

L2

112 OFFICE

2' x 2' ACT System 13' - 0" A.F.F.

1

GWB on Mtl. Stud 13' - 0" A.F.F.

IA301

3 2

4

L4 IA301 GWB on Mtl. Stud 9' - 0" A.F.F. 3' - 0"

4' - 0"

105 WOMEN'S RESTROOM3' - 0"

5' - 0"

5

116 OFFICE

2 HR & Breakroom L1

2' x 2' ACT System 13' - 0" A.F.F.

12' - 5 1/8"

L5

GWB on Mtl. Stud 10' - 0" A.F.F.

IA400

L2 4' - 0"

4' - 0"

115 OFFICE

Reception / Waiting Area

6' - 0" TYP

6' - 0"

12' - 7 1/8"

4' - 0"

117 OPEN OFFICE

26' - 6 1/8"

106 MEN'S RESTROOM

L3 GWB on Mtl. Stud 12' - 0" A.F.F.

4' - 0"

4' - 0" TYP

114 OFFICE

IA300

DRINKING FOUNTAINS

3 IA300

EXIT

2

6' - 0" TYP

107 4' - 0" JANTR CLOSET 6' - 0" TYP

2' - 0"

CEILING PLAN NOTES TIERED CEILING, 2 HEIGHTS 1 FT. DIFFERENCE 1

IA301

EXIT

100 Reception / Lobby

6' - 0"

2

TWO DIFFERENT CEILING MATERIALS BUT SAME HEIGHT.

3

GYPSUM BOARD CEILING IS 9' 0" A.F.F. LOWER THAN THE REST OF THE CEILING

CEILING LEGEND

L2

ACOUSTIC CEILING TILE (ACT) 2' x 2'

1 1 IA400

104 BREAKROOM

103 HUMAN RESOURCE

GWB on Mtl. Stud 13' - 0" A.F.F.

102 CONFERENCE ROOM

101 WAITING AREA

GYPSUM BOARD CEILING 4 CFO Office

1

IA301

---

Level 1 1/8" = 1'-0"

LIGHTING LEGEND L1

L2

L3

L4

L5

L1 - CIRCLE HANGING PENDANTS L2 - CIRCLE SURFACE MOUNT L3 - GENERAL LIGHTING

INTERIOR RENOVATIONS

L4 - LED STRIPS IN FRONT OF WELCOME PARTITION L5 - HANGING PENDANTS IN R / L

Reflected Ceiling Plan (1st Floor) RCP LEGEND LEVEL 1 1/4" = 1'-0" Project number Date Drawn by Checked by

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA200 Scale

As indicated

2/28/2020 7:19:50 PM

---

L1

2' x 2' ACT System 13' - 0" A.F.F.

L1 207 EXEC. OFFICE

206 BREAKROOM

2' - 0"

GWB on Mtl. Stud 12' - 0" A.F.F.

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

L1 208 EXEC. OFFICE

2' - 0" TYP

L1

210 OFFICE 205 FILE ROOM

ceiling 11' - 0" A.F.F.

CEILING PLAN NOTES TIERED CEILING, 2 HEIGHTS 1 FT. DIFFERENCE 1

L3

IA300

211 OFFICES

212 OFFICE

213 OFFICE

214 OFFICE

4' - 0"

3' - 6" TYP

218 OPEN OFFICE

1 IA400 202 PAPER ROOM

EXIT

ACOUSTIC CEILING TILE (ACT) 2' x 2' 209 CONF ROOM

3

GYPSUM BOARD CEILING

215 OFFICE

GWB on Mtl. Stud 12' - 0" A.F.F.

L1

LIGHTING LEGEND

201 CFO OFFICE

2' x 2' ACT System 13' - 0" A.F.F.

L1

4 CFO Office

Level 2 1 1/8" = 1'-0"

GYPSUM BOARD CEILING IS 9' 0" A.F.F. LOWER THAN THE REST OF THE CEILING

2' - 0"

L1

2' - 0"

203 WOMEN'S RESTROOM

IA301

2' - 0" TYP

5' - 0" TYP

4' - 0"

4' - 0"

2nd Floor Conference Room

217 OFFICES

GWB on Mtl. Stud 9' - 0" A.F.F.6' - 0" TYP

L2

TWO DIFFERENT CEILING MATERIALS BUT SAME HEIGHT.

3

CEILING LEGEND

L2 L2

4' - 0"

2

IA301

--L2

L3

L4

L5

RCP LEGEND LEVEL 2 1/4" = 1'-0"

L1 - CIRCLE HANGING PENDANTS L2 - CIRCLE SURFACE MOUNT L3 - GENERAL LIGHTING

INTERIOR RENOVATIONS

L4 - LED STRIPS IN FRONT OF WELCOME PARTITION L5 - HANGING PENDANTS IN R / L

Reflected Ceiling Plan (2nd Floor) Project number Date Drawn by Checked by

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA201 Scale

As indicated

2/28/2020 7:19:56 PM

204 MEN'S RESTROOM

216 OFFICES

2

EXIT

7' - 0"

7' - 0"

3 IA300

2' - 0"

4' - 0"

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

2

2' - 3 15/16"

3' - 0"

9' - 3 9/16"

13' - 0" 2' - 11 7/8"

10' - 9 7/16"

6' - 5 15/16"

MOBILITY FILE CABINETS

FILE ROOM & BREAKROOM 1/4" = 1'-0" ---

LAWYER'S OFFICE WALLS DIRTT - THERMOFOIL MATTE LUXE WHITE 2 IA300

5

7' - 0"

10' - 9 7/16"

9' - 3 9/16"

2' - 4 1/32"

11' - 0"

12' - 0"

10' - 0"

IA400

13' - 0"

Project number Date Drawn by

3

OFFICES 1/4" = 1'-0"

Checked by

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA300 Scale

1/4" = 1'-0"

2/28/2020 7:20:06 PM

Building Sections

7' - 4"

12' - 0"

10' - 9 7/16"

10' - 0"

INTERIOR RENOVATIONS 10' - 9 7/16"

1 IA400

REFRIGERATOR

1' - 0"

5' - 6 7/8"

9' - 0"

13' - 0"

9' - 3 9/16"

1' - 10"

2' - 5"

1' - 9 5/16"

5' - 2 1/32"

13' - 0"

12' - 6 29/32"

2

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

HR & Breakroom 1/4" = 1'-0"

3 IA300

3 IA300

STOREFRONT WALLS

7' - 10 3/4"

10' - 9 7/16"

10' - 0"

2' - 5"

13' - 0"

12' - 6 29/32"

2' - 2 5/8"

3

2' - 5 1/8"

3' - 1 1/8"

FLUSH MOUNTED TV

12' - 0"

10' - 9 7/16"

13' - 0"

DIRTT WALLS - THERMOFOIL - MATTE LUXE WHITE

2nd Floor Conference Room 1/4" = 1'-0"

1

1st Floor Offices 1/4" = 1'-0"

3 -

IA300

--MARBLE FINISH WALL BIOPHILIA COLUMNS

1' - 9 3/32"

Project number Date Drawn by Checked by

4

CFO Office 1/4" = 1'-0"

5

Project Number 03 MARCH, 2020 Author Checker

IA301

Reception / Waiting Area 1/4" = 1'-0" Scale

1/4" = 1'-0"

2/28/2020 7:20:18 PM

3' - 6"

2' - 6"

3' - 10 3/32"

4' - 0 13/16"

10' - 0"

4

IA302

5' - 7"

Interior Elevations

8' - 6"

9' - 0"

12' - 0"

13' - 0" 2' - 6"

2' - 5"

7' - 4"

9' - 3 9/16"

INTERIOR RENOVATIONS

2' - 6"

TOP OF RECEPTION DESK

4

1/2" = 1'-0"

RECEPTION DESK ISO

RECEPTION DESK 1/2" = 1'-0"

6

DISHWASHER

FRONT VIEW OF CAFE 1/2" = 1'-0"

2

2' - 6"

IA302

2' - 0"

5

CAFE

INTERIOR RENOVATIONS Detail Drawing (Millwork Elevations, Millwork Sections, etc.)

Project number

2

TOP OF CAFE 1/2" = 1'-0"

6

CAFE 1/2" = 1'-0"

Date Drawn by Checked by

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA302 Scale

1/2" = 1'-0"

2/28/2020 7:20:30 PM

2

3

3' - 0"

3' - 6"

FRONT VIEW OF RECEP. DESK 1/2" = 1'-0"

1

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

8' - 3 9/16"

T3 8' - 0"

R

2'

T5

-6

"

4' - 8"

2' - 0 7/16"

WOMEN'S RESTROOM 205

2nd Floor Bathroom 1/4" = 1'-0"

1

3

IA400

IA300

3

WC WALL 1/4" = 1'-0"

3' - 0"

7' - 0"

Enlarged Restroom Plan, Elevations, Typical ADA Diagrams, etc.

9' - 0"

2' - 6"

8' - 6 29/32"

7' - 0"

INTERIOR RENOVATIONS

VANITY MIRROR

3' - 0"

2' - 0"

2' - 3 1/2"

Project number 1' - 1 1/2"

2' - 7 1/2"

9' - 0"

1' - 1 1/2"

2' - 0"

7' - 0"

VANITY MIRROR

2' - 3 1/2"

10' - 0"

IA300

9' - 0"

1

5 IA400 T5

1' - 6 1/8"

3

T1 - COMMERCIAL TOILET 19" T2 - SQUARE VANITY SINK T3 - ADA CORNER GRABRAIL T4 - COUNTER TOP W/ TWO SINKS T5 - TORK MINI MECHANICAL HAND TOWEL DISPENSER T6 - URINALS T7 - ADA DRINKING FOUNTAINS T8 - VANITY MIRROR

T4

8' - 6 29/32"

1st Floor Bathrooms 1/4" = 1'-0"

IA400

1

TOILET ACCESSORIES

T8

T4

5' - 8 3/8"

17' - 0"

2'

IA400

Date Drawn by Checked by

4

DRINKING FOUNTAINS 1/2" = 1'-0"

5

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA400

SINK WALL 1/4" = 1'-0" Scale

As indicated

2/28/2020 7:20:36 PM

6" 2' R

2' - 6"

T8

T3

2

R

4

7' - 8"

IA400 4' - 0"

2' - 6"

T7

R

4' - 2 7/8" 0' - 7 7/16"

4' - 0"

T2

6"

2' -

6"

4' -

0"

6"

5

T2

1' - 10 1/4"

1' - 10 7/16"

T1

9' - 10 13/16"

6' - 4 25/32"

2' - 10 7/16"

2' -

"

T5

T7

WOMEN'S RESTROOM 105

-6

DRINKING FOUNTAINS

7' - 0" 3' - 2 1/8"

14' - 0"

1' - 3 7/16"

"

2'

4' - 0 11/16"

-6

R

4' - 0"

2'

206 MEN'S RESTROOM

2' - 6"

9' - 2 13/16" R

T1

1' - 2 27/32"

3' - 5 1/4"

" -6

T4

4' - 3 25/32"

R - 0" 13' 2' -6 " 2'

T5

T6

6' - 8 13/16"

4' - 11 25/32"

MEN'S RESTROOM 106

T8

2' - 6"

7' - 0" 3' - 4 1/4"

" -0

2' - 3 15/16"

3

IA300

17' - 0"

16' - 11 1/4"

4' - 0"

4'

T6

T4

2 IA300

5' - 4"

6" 2' R

T2

T2

0"

6"

4' -

1' - 7 3/4"2' - 0 1/8"

2' -

T3 5' - 7 3/8"

T5 T1

1' - 8 15/16"

1' - 0 5/8"

1' - 8 15/16"

16' - 11 1/4"

F10

OFFICE 111

F3

1

IA301 UP

F2

F3

3' - 2 11/16"

F3

F2 F7

F2

4' - 0"

CONF. ROOM 102

F8

5' - 11 11/16"

F7

F2

PLAN NOTES BUILT- IN LOCATIONS 1

F1

F6

F4 4' - 6"

BF

BF

BF

IA301 RECEPTION / LOBBY 100

6' - 2"

BF

BF

F5

3' - 7 23/32"

BF

5

HUM RESRCE 103

F3 4' - 7 9/32"

OFFICES 116

F3

E1353.48E 62/48G 62/48G 62/48G 62/48G 6 2E 2E E1353.48E

BREAKROOM 104

OFFICES F3 115

F7

2 HR & Breakroom

BF

BF

FS1

3' - 5 11/16"

WOMEN'S RESTROOM 105

F3

OFFICES 114

Reception / Waiting Area

10' - 0"

F2

F4

F9

F1

F7 OPEN OFFICE 117

IA301

-

OFFICE F7 112

1st Floor Offices

8' - 0"

F2

ELEC CLST 8' - 0" 108 JAN CLST 107

MEN'S RESTROOM 106

-

OFFICES 113

F7

5' - 0"

5' - 0"

5' - 0"

5' - 0"

MECH ROOM 118 IT SRVR 8' - 9" 109

F2

F1

F2

13' - 11 1/16"

F7

MAIL ROOM 110

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

WAITING AREA 101

F3

2

REFRIGERATOR / FREEZER PROVIDED BY TENANT. VERIFY ELEMENTS REQUIRMENTS

3

ABOVE COUNTER MICROWAVE BY TENANT. VERIFY ELEMENTS REQUIRMENTS

4

DISHWASHER BY TENANT. SEE PLUMBING DETAILS

5

SEMI- RECESSED FIRE EXTINGUISHER CABINET AND FIRE EXTINGUISHER. MOUNT AT TOP AT +54" A.F.F. FIRE EXTINGUISHER TO HAVE MIN. RATING OF 4A20BC FOR EVERY 3000 SQ. FT. OF FLOOR AREA. TRAVEL DISTANCE TO AN EXTINGUISHER SHALL NOT EXCEED 75 FT. ALL EXTINGUISHERS SHALL BE CONSPICUOUSLY LOCATED AND READILY ACCESSIBLE. THE TOP OF THE EXTINGUISHER SHALL NOT BE MORE THAN 5' 0" ABOVE THE FLOOR AND BOTTOM OF THE EXTINGUISHER SHALL NOT BE LESS THAN 4" ABOVE THE FLOOR.

6

STANDARD AND ADA DRINKING FOUNTAINS. SEE PLUMBING PLANS

7

NEW JANITOR MOP SINK. DRY WALL CONTRACTOR TO PROVIDE FIBERGLASS REINFORCED PANELS BEHIND SINK. PROVIDE 30" LONG FLEXIBLE HOSE AND HOSE CLAMP. SEE PLUMBING DRAWINGS

8

WATER HEATER LOCATION. SEE PLUMBING DRAWINGS

9

FIRE WALL - 1 HR

UP

1st Furniture Plan 3/32" = 1'-0"

3' - 5 3/8"

1

F4

F2 3' - 3 15/32"

F4

F7

F6 F14

6" 7/1

F3

F15

F11

2 4' -

Breakroom 206

F2

F1

208 EXEC. OFFICE

F7

EXEC. OFFICE 207

F1

F11

F2 F7 LAWYER 210 F11 F1 CORR.

F2

DRINKING FOUNTAINS

8' - 0"

4

F1 LAWYER 217

CORRIDOR

F7

F7 LAWYER 214 F1 F11

2"

F11

F1

F2

F7

F8

F1

-7

F2 F12

F2

F11

OPEN OFFICE 218 /3 2"

BF

15

F2

F6

F4

FS2

CFO OFFICE 201 F1 F1

4 CFO Office IA301

2nd Furniture Plan 3/32" = 1'-0"

COLUMN SYMBOL

4' - 10 5/32" F2

1 -1

F13 4'

ROOM NAME

F7

3

IA301

F7

F3

F10

DN

2

CONF. ROOM 209

LAWYER 215

202 COPY / PRINT

-

ELEVATION SYMBOL

29

/3

-

F11

3'

4' - 8"

3' - 10 1/4" 203 WOMEN'S RESTROOM

SECTION SYMBOL

DN

ROOM NUMBER

LAWYER 213

F2

3' - 0"

F7 LAWYER 212 F1 F11

LAWYER 211 F1

F2

F7

F2

F11

F11

IA400

F2 F7

F7 LAWYER 216 F1 F11

204 MEN'S RESTROOMS

SYMBOL KEY CORR.

FURNITURE LEGEND

INTERIOR RENOVATIONS

F1 - ARMCHAIRS F2 - MESH ROLLER CHAIR F3 - PLASTIC CHAIR F4 - LOUNGE SOFA F5 - HERMAN MILLER WORK CHAIR F6 - LOUNGE TABLES F7 - OFFICE DESK TABLE F8 - CONFERENCE TABLE F9 - RECTANGULAR DINING TABLE F10 - CREDENZA F11 - SHELVING STORAGE F12 - HERMAN MILLER OVERHEAD STORAGE CABINET F13 - CUSTOM WORK DESK F14 - SQUARE DINING TABLE F15 - COUNTER TOP

Furniture Plans

---

FURNITURE SYSTEM FS1 - HERMAN MILLER WORKSTATION FS2 - PART OF HERMAN MILLER WORKSTATION FS3 - SPACESAVER MOBILE SHELVING

Project number Date Drawn by Checked by

Project Number 03 MARCH, 2020 Author Checker

IA600

FURNITURE PLAN LEGEND 1/4" = 1'-0" Scale

As indicated

2/28/2020 7:20:44 PM

File Room 205

2nd Floor Conference Room

FS3

W1

W5 MAIN FLOORING - CONCRETE

10' - 1 7/16"

OFFICE 112

10' - 0"

13' - 0"

MAIL ROOM 110

9' - 6"

20' - 0 29/32"

OFFICE 111 W1

MECH ROOM 118

1

43' - 11 17/32"

W2

Reception / Waiting Area 5

19' - 9 11/32"

14' - 9 3/32"

BF

BF

GRAY WASH OAK WOOD FINISH

IA301 RECEPTION / LOBBY 100

CONF. ROOM 102

PLAN NOTES BUILT- IN LOCATIONS 1 WAITING AREA 101

2' - 4 15/16"

BF

BF

3' - 7 7/8"

BF

E1353.48E 62/48G 62/48G 62/48G 62/48G 6 2E 2E E1353.48E

BF

BREAKROOM 104

BF

BF

HUM RESRCE 103

-

42' - 1 27/32"

F3

2 HR & Breakroom

2' - 2 3/16"

W4 -

20' - 5 11/16"

OFFICES 115

OFFICES 116

14' - 9 3/32"

WOMEN'S RESTROOM 105

OFFICES 114

IA301

13' - 5 7/8"

33' - 3"

7' - 2 15/16"

MEN'S RESTROOM 106

12' - 5 7/8"

OPEN OFFICE 117

BATHROOM FLOORING PORCELAIN TILE

IA301 UP

JAN. CLST 107

20' - 5 11/16"

2

REFRIGERATOR / FREEZER PROVIDED BY TENANT. VERIFY ELEMENTS REQUIRMENTS

3

ABOVE COUNTER MICROWAVE BY TENANT. VERIFY ELEMENTS REQUIRMENTS

4

DISHWASHER BY TENANT. SEE PLUMBING DETAILS

5

SEMI- RECESSED FIRE EXTINGUISHER CABINET AND FIRE EXTINGUISHER. MOUNT AT TOP AT +54" A.F.F. FIRE EXTINGUISHER TO HAVE MIN. RATING OF 4A20BC FOR EVERY 3000 SQ. FT. OF FLOOR AREA. TRAVEL DISTANCE TO AN EXTINGUISHER SHALL NOT EXCEED 75 FT. ALL EXTINGUISHERS SHALL BE CONSPICUOUSLY LOCATED AND READILY ACCESSIBLE. THE TOP OF THE EXTINGUISHER SHALL NOT BE MORE THAN 5' 0" ABOVE THE FLOOR AND BOTTOM OF THE EXTINGUISHER SHALL NOT BE LESS THAN 4" ABOVE THE FLOOR.

6

STANDARD AND ADA DRINKING FOUNTAINS. SEE PLUMBING PLANS

7

NEW JANITOR MOP SINK. DRY WALL CONTRACTOR TO PROVIDE FIBERGLASS REINFORCED PANELS BEHIND SINK. PROVIDE 30" LONG FLEXIBLE HOSE AND HOSE CLAMP. SEE PLUMBING DRAWINGS

8

WATER HEATER LOCATION. SEE PLUMBING DRAWINGS

9

FIRE WALL - 1 HR

UP

-

W3

---

1st Finish Plan 3/32" = 1'-0" MAIN FLOORING - CONCRETE

W5

Breakroom 206

10' - 0"

15' - 11 1/2"

9' - 0"

9' - 6 7/16"

EXEC. OFFICE 208

EXEC. OFFICE 207

10' - 1 11/32"

1

W1

SYMBOL KEY

SECTION SYMBOL

LAWYER 210 File Room 205

CORR.

CORR.

ELEVATION SYMBOL

DN 19' - 0 15/16"

ROOM NUMBER

LAWYER 213

COLUMN SYMBOL

IA400

3

IA301

LAWYER 214

39' - 1 31/32"

CFO OFFICE 201 BF

4 CFO Office IA301 W4

2nd Finish Plan 3/32" = 1'-0"

CONF. ROOM 209

FINISH LEGEND

W3

12' - 6"

OPEN OFFICE 218

DN

2

GRAY WASH OAK WOOD FINISH

LAWYER 215

COPY / PRINT 202

-

ROOM NAME 47' - 9 7/8"

CORRIDOR LAWYER 217

WOMEN'S RESTROOM 203

-

LAWYER 212

2nd Floor Conference Room

4

LAWYER 211

14' - 7 1/2"

32' - 0 11/16"

MEN'S RESTROOMS 204

DRINKING FOUNTAINS

LAWYER 216

BATHROOM FLOORING PORCELAIN TILE

TITLE

SYMBOL

EXTERIOR WALLS

W1

INTERIOR PARTITION

W2

CURTAIN WALL

W3

GLASS

INTERIOR WALLS

W4

GYPSUM BOARD

DIRTT OFF. WALLS

W5

THERMOFOIL - MATTE LUXE WHITE

INTERIOR RENOVATIONS

MATERIAL PLYWOOD, SHEATHING; INSULLATION; METAL STUD LAYER MARBLE FINISH

MAIN FLOOR

CONCRETE

MAIN FLOOR

GRAY WASH OAK WOOD

BATHROOM FLOOR

PORCELAIN TILE

Finish Plans

Project number ---

Date Drawn by Checked by

Project Number 03 MARCH, 2020 KYANA FRIERSON PROFESSOR

IA700 Scale

3/32" = 1'-0"

2/28/2020 7:21:07 PM

ELEC CLST 108

1st Floor Offices

IT SRVR 109

OFFICES 113

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

F10

111 OFFICE

F2 F3

F1

1

IA301 UP

F7 F3 117 OPEN OFFICE

F2

F3

F2

F2

BF

BF

BF

Reception / Waiting Area IA301 100 RECEPTION / LOBBY

F2

F8

F2 5' - 11 11/16"

5

4' - 0"

F4

F1

F6

F4

F1

F2

F5

3' - 7 23/32"

F5 4' - 7 9/32"

BF

F3

F3 104 F3 BREAKROOM

F2

6' - 2" 102 F1 CONFERENCE ROOM F6

F2

E1353.48E 62/48G 62/48G 62/48G 62/48G 6 2E 2E E1353.48E

116 OFFICES

F2

F7

F2

F1

F3

PLAN NOTES * BUILT- IN DESK LOCATION * REFRIGERATOR / FREEZER PROVIDED BY TENANT. VERIFY ELEMENTS REQUIRMENTS * ABOVE COUNTER MICROWAVE BY TENANT. VERIFY ELEMENTS REQUIRMENTS * DISHWASHER BY TENANT. SEE PLUMBING DETAILS * SEMI- RECESSED FIRE EXTINGUISHER CABINET AND FIRE EXTINGUISHER. MOUNT AT TOP AT +54" A.F.F. FIRE EXTINGUISHER TO HAVE MIN. RATING OF 4A20BC FOR EVERY 3000 SQ. FT. OF FLOOR AREA. TRAVEL DISTANCE TO AN EXTINGUISHER SHALL NOT EXCEED 75 FT. ALL EXTINGUISHERS SHALL BE CONSPICUOUSLY LOCATED AND READILY ACCESSIBLE. THE TOP OF THE EXTINGUISHER SHALL NOT BE MORE THAN 5' 0" ABOVE THE FLOOR AND BOTTOM OF THE EXTINGUISHER SHALL NOT BE LESS THAN 4" ABOVE THE FLOOR. * STANDARD AND ADA DRINKING FOUNTAINS. SEE PLUMBING PLANS * NEW JANITOR MOP SINK. DRY WALL CONTRACTOR TO PROVIDE FIBERGLASS REINFORCED PANELS BEHIND SINK. PROVIDE 30" LONG FLEXIBLE HOSE AND HOSE CLAMP. SEE PLUMBING DRAWINGS * WATER HEATER LOCATION. SEE PLUMBING DRAWINGS

F1 F4

4' - 6"

BF

BF

BF

F3

F2 F7

103 HUM RESRCE F5

F5

F3

115 F3 OFFICES

2 HR & Breakroom

BF

3' - 5 11/16"

5' - 3 1/32"

FS1

F3 F7

3' - 2 11/16"

6' - 8 13/16"

IA301

7' - 0"

F2

4' - 0 19/32"

10' - 0"

13' - 0"

F4

105 WOMEN'S RESTROOM

F9

F3

114 OFFICES

F4

106 MEN'S RESTROOM 17' - 0"

F6 F1

101 F6 WAITING AREA F1

F1

UP

-

1st Floor Power Plan 1 3/32" = 1'-0"

F3

F4

6" 7/1

4

CORRIDOR F2

F7

F7

F2

29

/3

2"

F13

F7

F3

-1

1

F13 F3

3'

4' - 8" 3' - 3 21/32"

203 WOMEN'S RESTROOM

F3 F13

F10

F3

F11 F13

F13

F3 F13

F3 4'

-7

F4

F3 15

/3 2"

DN

F11 F11

F1

F1 213 LAWYER F7 F2

3

IA301

F1

215 LAWYER F7

F2 4' - 10 5/32" F2

F2

F2

F2

F2

F4

INTERIOR RENOVATIONS

F12 F11

218 OPEN OFFICE F6

F2

F2

F2 FS2

201 CFO OFFICE

ELECTRICAL LEGEND

F1 E1

F1

4 CFO Office IA301

2nd Floor Power Plan 3/32" = 1'-0"

E1 209 CONF. ROOM F7 F8 F2 F2

BF

F10

DN

F13

F3

1' - 9"

202 COPY / PRINT

214 LAWYER F1 F11

3' - 0"

F7 212 LAWYER

F1

F11

F11 F1 217 LAWYER

3' - 10 1/4"

F2

211 LAWYER F1

IA400

CORR. F7

3' - 2 15/16" TYP

DRINKING FOUNTAINS

8' - 0"

F1

F2

2nd Floor Conference Room

F11 CORR.

F2

F11

204 MEN'S RESTROOMS

2

F11

F7 210 LAWYER

F7 216 LAWYER

-

F1

F1

208 EXEC. OFFICE

F1

205 File Room 4' - 5 7/8"

-

E1 F7

F2

FS3

E1

F2

F1

207 EXEC. OFFICE

F11

2 4' -

F3

F15

F7

F6 F3

F14

E1

4' - 3 27/32"

F2 3' - 3 15/32"

F3

206 Breakroom

F4

E1

F3

4' - 3 27/32"

F3 F3 F14

F4

3' - 5 3/8"

---

E1 - FLOOR DUPLEX OUTLET

Electrical / Power / Communications Plans

--Project number Date

ELECTRICAL LEGEND 1/4" = 1'-0"

Drawn by Checked by

Project Number 03 MARCH, 2020 Author Checker

IA800 Scale

As indicated

2/28/2020 7:21:41 PM

-

113 OFFICES

F4

8' - 0"

-

F1

1st Floor Offices

8' - 0"

F7 F3

5' - 0"

107 JAN CLST

F3

112 F7 OFFICE

11' - 11 11/16"

108 8'ELEC - 0" CLST 5' - 0"

5' - 0"

5' - 0"

118 MECH ROOM 109 8' - 9" IT SRVR

F2

F1

F2

13' - 11 1/16"

F1 F7

110 MAIL ROOM

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

GENERAL NOTES * ALL DIMENSIONS ARE FROM FACE OF WALL TO FACE OF WALL UNLESS NOTED OR SHOWN OTHERWISE ... * PROVIDE WOOD BLOCKING SUPPORTS AS REQUIRED FOR ALL SURFACE MOUNTED ITEMS * COORDIMATE WORK OF THIS TRADE WITH OTHER TRADES * NEW DOOR AND FRAME NUMBERS CORRESPOND TO ROOM NUMBERS ... * PROVIDE MISCELLANEOUS METAL SUPPORT FOR ALL CEILING SUSPENDED ITEMS * APPLY SEALANT AT ALL JUNCTURES BETWEEN DIFFERENT MATERIALS (IE. STOREFRONT AND GYPSUM BOARD) *" " PLUMBING FIXTURES AT JUNCTURE WITH WALL *" " COUNTERTOPS AND BACK SLASHES AT JUNCTURE WITH WALL * ALL STEEL STUDS ARE TO BE BRACED ACCORDING TO MANUFACTURER'S LIMITING HEIGHT L/120 * ALL INTERIOR WALLS SHALL BE MARKED IN PLACE PRIOR TO FRAMING FOR ARCHITECT REVIEW * ALL DOORS MUST BE INSTALLED WITH AT LEAST THE MINIMUM MANEUVERING CLEARANCE AT THE DOOR APPROACH/ THE MOST CURRENT AMERICANS WITH DISABILITIES ACT AND FLORIDA BUILDING CODES * FLOOR SHALL BE CLEANED, SMOOTH AND LEVEL FOR INSTALLATION OF NEW FLOOR FINISHES AS SHOWN * ALL FURNITURE AND WORK STATIONS PROVIDED AND INSTALLED BY * PROVIDE GYPSUM BOARD, FURRING AND INSULATION ON EXTERIOR WALL IN ALL CONDITIONED SPACE AS NECESSARY * FIRE EXTINGUISHERS SHOWN IN ASSUMED LOCATIONS. CONTRACTOR TO COORDINATE NUMBER, TYPE AND LOCATION REQUIRED / CODE AND CONFIRM WITH LOCAL FIRE MARSHALL. * PROVIDE SEALED PENETRATIONS INTO BUILDING FOR CABLE, TV AND TELEPHONE COORDINATE WITH OWNER * NEW MECHANICAL RTU LOCATED ON ROOF WILL NOT BE VISIBLE FROM THE STREET. IN CASE IT BECOMES VISIBLE, MAUFACTURER SCREENING WILL BE INSTALLED, PER MANUFACTURER STANDARDS

2

Reception / Lobby

INTERIOR RENOVATIONS

Project number

1

Date

Breakroom

Drawn by Checked by

Project Number 03 MARCH, 2020 Author Checker

IA900 Scale

3

Back of 1st Floor

2/28/2020 7:22:04 PM

Perspectives (Not Rendered)