Page 1


ICONS CCCUO Closed Course Competition Use Only

50_STATE 50 State Legal

When you see this icon, you can rest assured that you’ve made the best choice, because our Factory Team relies on this KTM PowerParts product.

003


INTRO 006

1

ENGINE 008

2

EXHAUST 014

2-STROKE 014

4-STROKE 018

11

CHAINS + SPROCKETS 082

SPROCKETS 082 CHAINS 086 SPECIAL PARTS 088

12

BRAKES 090

BRAKE DISCS 090 BRAKE PADS 094 SERVICE 096 SPECIAL PARTS 097

13

COOLING 098

3

HANDLEBAR + INSTRUMENTS / ELECTRIC 024

GRIPS 024 LEVERS 028 HANDGUARDS 030 HANDLEBARS 034 HANDLEBAR SUPPORT 036 STEERING DAMPER 038 INSTRUMENTS / ELECTRIC 040 SPECIAL PARTS 042

4

CNC PARTS ANODIZED 046

ENGINE 046 CHASSIS 048

5

PLASTIC PARTS + DECALS 050

PLASTIC PARTS 050 DECALS 052

6

SEATS 056

7

FOOTPEGS 060

8

TANKS 062

9

SUSPENSION 064

10

WHEELS 076

OFFROAD 076 SPECIAL PARTS 078

RADIATOR 098 FANS 099 PROTECTION 100

14

PROTECTION 102

ENGINE PROTECTION 2-STROKE 102 ENGINE PROTECTION 4-STROKE 104 CHASSIS 110

15

AIR FILTER 116

16

NAVIGATION + LUGGAGE 118

17

FREERIDE 122

18

50/65/85 SX 142

19

TOOLS + TRANSPORTATION

TOOLS 170 STANDS 182 TRANSPORTATION 184

WP // RIDE HARDER

170

072 – 075 154 – 157 

005


INTRO

INTENSIFIED PERFORMANCE KTM PowerParts are developed and engineered with racing in mind. All products are subjected to strenuous R&D in the field, bringing intensified style and function to KTM offroad motorcycles. This attention to detail and exceptional production quality makes KTM PowerParts essential for taking your motorcycle to the next level.

007


ENGINE

SXS.16.125.907 I 125 SX

16 – 20

SXS.16.150.907 I 150 SX 150 XC-W

16 – 20 17 – 20

FACTORY PISTON Specially developed high-performance piston with the following properties: – Higher performance across the entire power band – Higher peak power – Optimized friction – Only one piston ring – Special surface coating Due to the higher load on the engine, the new service intervals specified in your KTM Owner’s Manual must be complied with.

SXS.16.150.000 

557.30.905.044 

125 SX

250 SX

16 – 20

150 FACTORY KIT All the parts needed for the conversion of your 125 SX to a 150 SX; so that you’re one step ahead of your competitors.

19 – 20

300 FACTORY KIT All the parts required for converting your 250 SX to a 300 SX for the Open class. More information on the carburetor jetting can be obtained from your authorized KTM dealer.

009


ENGINE

554.32.900.000  250 SX 250/300 XC / XC-W

17 – 20 17 – 20

261.30.826.000 

255.30.826.000 

450 SX-F / XC-F 450/500 EXC-F 500 XCF-W

250/350 SX-F / XC-F  16 – 20 250/350 EXC-F 17 – 20 350 XCF-W 20

16 – 20 17 – 20 20

HINSON OUTER CLUTCH COVER – Manufactured from high grade aluminum – Hard anodized, extremely durable surface

792.32.900.000  250/350 EXC-F 17 – 20 350 XCF-W  20

HINSON OUTER CLUTCH COVER – Manufactured from high grade aluminum – Hard anodized, extremely durable surface

794.32.900.100  450 SX-F / XC-F 450/500 EXC-F 500 XCF-W

16 – 20 17 – 20 20

REKLUSE EXP 3.0 CENTRIFUGAL FORCE CLUTCH KIT The latest generation of the Rekluse automatic clutch featuring EXP technology. This automatic clutch utilizes the stock basket and hub for a simple and quick installation. Benefits include: – Easy external adjustments made with the included slave cylinder – No stalling in critical situations such as braking, descents and low-speed riding – Improved traction on slippery/rocky surfaces – More relaxed, fatigue-free riding – Not required to use the clutch lever, although it is still possible – Special left hand brake lever kit 781.13.900.100 available for even more control – Tested and approved by our Factory Offroad Team riders

SXS.02.125.071  125 SX 144/150 SX

00 – 20 07 – 20

FACTORY SPARK PLUG – Extremely robust spark plug – Center electrode tip made of iridium – Reinforced ground electrode (against vibration and breakage) – Special design with improved anti-shooting characteristic – Recommended in combination with factory cylinder heads, factory exhaust systems or factory digital box

792.32.902.000 

792.32.903.000 

250/350 EXC-F 17 – 20 350 XCF-W 20

250/350 EXC-F 17 – 20 350 XCF-W 20

781.32.902.000 

794.32.903.000 

250 SX 17 – 20 250/300 XC / XC-W 17 – 20 450 SX-F / XC-F 14 – 20 450/500 XCF-W / EXC-F 14 – 20

250 SX 17 – 20 250/300 XC / XC-W 17 – 20 450 SX-F / XC-F 14 – 20 450/500 XCF-W / EXC-F 14 – 20

HINSON INNER CLUTCH HUB – Improves clutch performance, heat dissipation and life – Precision machined from billet T-6 aircraft quality aluminum to aerospace tolerances – HINSON typical surface treatment for significantly increased wear resistance to stock – Allows clutch assembly to spin more true creating less heat when clutch is disengaged – Can be mounted to serial clutch or in combination with other HINSON clutch components

HINSON INNER CLUTCH HUB – Improves clutch performance, heat dissipation and life – Precision machined from billet T-6 aircraft quality aluminum to aerospace tolerances – HINSON typical surface treatment for significantly increased wear resistance to stock – Allows clutch assembly to spin more true creating less heat when clutch is disengaged – Can be mounted to serial clutch or in combination with other HINSON clutch components

011


ENGINE

795.32.900.044  450 SX-F / XC-F

557.12.945.044 

20

SLIPPER CLUTCH Be on the racing line right from the start! Developed for racing, machined from the highest grade of T6 aircraft technology aluminum. – Smoother running – Fully adjustable Anti-Hopping effect – Best control under braking – Better behavior in curves

250/300 XC TPI 250/300 XC-W

19-20 20

KICK-STARTER KIT All the parts you need to install a kick-starter on your bike. Having the combination of kick-starter and e-starter means you can be absolutely sure that your bike will always start up as quickly as possible.

791.11.053.000  781.13.900.100  250 SX 04 – 20 250/300 XC 06 – 20 450 SX-F / XC-F 16 – 20 250/300 XC-W 06 – 20 350/500 XCF-W 20 250/350 EXC-F 13 – 20 450/500 EXC-F 17 – 20 REAR BRAKE CONVERSION KIT For use with the automatic clutch. Allows braking of the rear wheel with the left hand, hence providing additional control in critical situations.

LITHIUM ION BATTERY The following benefits are the mark of our lithium-ion batteries: – Increased Cold Cranking Amps (CCA) value for better engine start in colder temperatures – 2.2 lbs lighter than the standard battery 773.11.053.000 – 3.5 lbs lighter than the standard battery 585.11.053.000 – Unbeatable cost / weight saving ratio – Mountable in any position, as it does not contain acid Technical data: – 12 V maintenance-free LiFePo4-battery – Capacity 2.0 Ah – Recommended charging current – 2.5 amps – Maximum charge current for fast charging – 10 amps – Fast charge with high charging current (up to 90 % in 10 min) – Very low self-discharge (max. 5 % per month) – Balanced discharge / charge of all cells through balancer – Contains no heavy metals When mounting on 125 SX and SX-F models from 2016 and later, the battery compartment 790.11.955.044 is also required.

013


EXHAUST 2-STROKE

557.05.981.000  CCCUO 250/300 XC-W

20

AKRAPOVIČ “SLIP-ON LINE” This Akrapovič slip-on silencer offers more power and torque, an uncompromising race look and substantial weight savings. Benefits include: – More power and torque – Manufactured from high-grade titanium – Profiled surface of the outer sleeve – Increased durability & resistance – Embossed Akrapovič logo on the end cap – Permanently welded attachment points – Tuned to comply with current AMA Amateur noise regulations CLOSED COURSE / COMPETITION USE ONLY

015


EXHAUST 2-STROKE

505.05.979.000  CCCUO 125/150 SX 150 XC-W

19 – 20 20

555.05.979.000  CCCUO 250 SX 250/300 XC

19 – 20 19 – 20

AKRAPOVIČ “SLIP-ON LINE” This Akrapovič slip-on silencer offers more power and torque, an uncompromising race look, and substantial weight savings. Benefits include: – More power and torque – Identical look to our Factory Team – Manufactured from high-grade titanium – Permanently welded attachment points – Tuned to comply with current AMA Amateur noise regulations – Akrapovič logo sticker on silencer

505.05.979.003  CCCUO

505.05.979.002  CCCUO

125/150 SX 150 XC-W

125/150 SX 150 XC-W

19 – 20 20

19 – 20 20

555.05.979.003  CCCUO

555.05.979.002  CCCUO

250 SX 250/300 XC 250/300 XC-W

250 SX 250/300 XC 250/300 XC-W

19 – 20 19 – 20 20

FMF TITAN POWERCORE 2.1 SILENCER – Manufactured from special high-grade titanium, with a blue anodized outer sleeve – Titanium silencer end cap – Lightweight – Simple fitting – Easy to install – Recommended in combination with an FMF expansion exhaust chamber for a perfectly tuned and performance optimized system

19 – 20 19 – 20 20

FMF POWERCORE 2.1 SILENCER – Outer sleeve manufactured from high-grade aluminum – Lightweight – Simple fitting – Easy to install – Specially developed for motocross use – Recommended in combination with an FMF expansion chamber for a perfectly tuned and performance optimized system

557.05.994.000  250/300 SX 250/300 XC-W

19 – 20 20

EXPANSION CHAMBER GUARD DID YOU ALREADY KNOW about the special properties of carbon fiber? – Extremely light: 80% lighter than steel with the same load-bearing capacity – Exceptionally stable: Four times more resilient than aluminum – Ultimate stiffness and strength – Free from corrosion – High continuous temperature resistance – Low thermal expansion This feather-light carbon pipe guard provides maximum service life to your exhaust. Ideal protection against roost, branches, etc. Can only be used in combination with the stock expansion chamber.

505.05.907.000  CCCUO 125 / 150 SX

19 – 20

517.05.907.000  CCCUO 150 XC-W

20

555.05.907.000  CCCUO 250 SX 250/300 XC 250/300 XC-W

19 – 20 19 – 20 20

FMF FATTY EXPANSION CHAMBER – Made from high quality, extra strong and durable steel – Nickel-plated, stainless, polished surface – Complete with O-rings – Recommended in combination with an FMF silencer for a perfectly tuned and performance optimized system CLOSED COURSE / COMPETITION USE ONLY

CLOSED COURSE / COMPETITION USE ONLY

CLOSED COURSE / COMPETITION USE ONLY

CLOSED COURSE / COMPETITION USE ONLY

517.05.981.004  CCCUO 150 XC-W

20

555.05.979.004  CCCUO 250 SX 250/300 XC 250/300 XC-W

19 – 20 19 – 20 20

FMF TURBINECORE 2.1 SILENCER – Outer sleeve manufactured from high-grade aluminum – Lightweight – Simple fitting – Easy to install – Specially developed for motocross use – Internal spark arrestor – Recommended in combination with an FMF expansion chamber for a perfectly tuned and performance optimized system CLOSED COURSE / COMPETITION USE ONLY

505.05.907.001  CCCUO 125/150 SX

19 – 20

517.05.907.001  CCCUO 150 XC-W

20

555.05.907.001  CCCUO 250 SX 250/300 XC 250/300 XC-W

19 – 20 19 – 20 20

FMF FACTORY FATTY EXPANSION CHAMBER – Made from high quality, extra strong and durable steel – Untreated surface for an original factory look – Complete with O-rings – Recommended in combination with an FMF silencer for a perfectly tuned and performance optimized system CLOSED COURSE / COMPETITION USE ONLY

017


EXHAUST 4-STROKE

256.05.981.500  50_STATE 350 EXC-F 500 EXC-F

20 20

AKRAPOVIČ “SLIP-ON LINE” This Akrapovič slip-on silencer offers an uncompromising look and substantial weight savings. Benefits include: – Manufactured from high-grade titanium – Profiled surface of the outer sleeve – Increased durability and resistance – Embossed Akrapovič logo on the end cap – Permanently welded attachment points

791.05.900.044  CCCUO 250 SX-F / XC-F 19 – 20 350 SX-F / XC-F 19 – 20

795.05.900.044  CCCUO 450 SX-F / XC-F 19 – 20 AKRAPOVIČ “EVOLUTION LINE” Your desire is our objective: more power and torque, uncompromising race looks and a significant savings in weight. The answer: Akrapovič “EVOLUTION LINE” – More power and torque – Identical look to our Factory Team – Manufactured entirely of high-grade titanium – Weight savings: approx. 2.2 lbs – Akrapovič logo sticker on muffler – Tuned to comply with the current AMA Amateur noise regulations CLOSED COURSE / COMPETITION USE ONLY

795.05.979.000  CCCUO 250 SX-F / XC-F 19 – 20 450 SX-F / XC-F 19 – 20

793.05.979.000  CCCUO 350 SX-F / XC-F 19 – 20 AKRAPOVIČ “SLIP-ON LINE” This Akrapovič slip-on silencer offers more power and torque, an uncompromising race look and substantial weight savings. Benefits include: – Improved torque curve, combined with perfectly rideable peak performance – Outer shell manufactured from high-grade titanium – Permanently welded attachment points – Akrapovič logo sticker on muffler – Tuned to comply with current AMA Amateur noise regulations CLOSED COURSE / COMPETITION USE ONLY

019


EXHAUST 4-STROKE

791.05.901.044  CCCUO 250 SX-F / XC-F 19 – 20 350 SX-F / XC-F 19 – 20

795.05.901.044  CCCUO 450 SX-F / XC-F 19 – 20 AKRAPOVIČ “RACING LINE” What you want and what we aim for: more power and torque, uncompromising race looks and a substantial savings in weight. – More power and torque – Stainless steel header – Outer shell of muffler manufactured from high-grade titanium – Additional expansion chamber for a smoother power delivery – Header routing designed for optimum performance – Akrapovič logo sticker on muffler – Tuned to comply with current AMA Amateur noise regulations CLOSED COURSE / COMPETITION USE ONLY

795.05.994.000  SX-F / XC-F 19 – 20 HEAT PROTECTION – Manufactured from carbon fiber – Can only be installed on Akrapovič “Slip-On Line,” “Racing Line” and “Evolution Line” – Not to be used together with the standard mounted frame protection set – The use of a frame protection sticker set is recommended

021


EXHAUST 4-STROKE

791.05.979.003  CCCUO

791.05.979.002  CCCUO

250 SX-F / XC-F 19 – 20

250 SX-F / XC-F 19 – 20

795.05.979.003  CCCUO

795.05.979.002  CCCUO

350 SX-F / XC-F 19 – 20 450 SX-F / XC-F 19 – 20

350 SX-F / XC-F 19 – 20 450 SX-F / XC-F 19 – 20

FMF FACTORY 4.1 RCT MUFFLER – Manufactured from a special high-grade titanium, with a blue anodized outer sleeve – Carbon silencer end cap – More power and torque – Substantial savings in weight – Can be fitted in combination with the original manifold – Recommended use in conjunction with an FMF megabomb header for a perfectly tuned perfomance optimized system – AMA Amateur Racing sound compliant

FMF POWERCORE 4 MUFFLER This FMF slip-on main muffler is made from the highest quality of materials, and not only stands out from the standard muffler with its appearance, but has been optimally adapted in terms of torque and power to the power characteristic of the series engine. Installation is only possible in combination with the original manifold. AMA Amateur Racing sound compliant. CLOSED COURSE / COMPETITION USE ONLY

CLOSED COURSE / COMPETITION USE ONLY

791.05.907.500  CCCUO

791.05.907.501  CCCUO

250 SX-F / XC-F 19 – 20

250 SX-F / XC-F 19 – 20

793.05.907.500  CCCUO

793.05.907.501  CCCUO

350 SX-F / XC-F 19 – 20

350 SX-F / XC-F 19 – 20

795.05.907.500  CCCUO

795.05.907.501  CCCUO

450 SX-F / XC-F 19 – 20

450 SX-F / XC-F 19 – 20

FMF MEGABOMB HEADER (TITANIUM) – Increased performance flow, and less sound – Made from high-grade, ultra-lightweight titanium – Premium machining – Manifold routing optimally tuned to match the production engine A resonance body is also used to help ensure optimal torque distribution and contribute to noise reduction.

FMF MEGABOMB HEADER (STAINLESS STEEL) – Increased performance flow, and less sound – Made from extra strong, durable stainless steel – Premium machining – Manifold routing optimally tuned to match the production engine A resonance body is also used to help ensure optimal torque distribution and contribute to noise reduction.

CLOSED COURSE / COMPETITION USE ONLY

CLOSED COURSE / COMPETITION USE ONLY

023


HANDLEBAR + INSTRUMENTS / ELECTRIC GRIPS

790.02.924.100 

CLOSED END

SX / XC 17 – 20 SX-F / XC-F 16 – 20 XC-W 17 – 20 XCF-W 20 EXC-F 17 – 20 LOCK-ON GRIP SET – Grip replacement made easy – Right grip permanently glued onto the throttle grip – Left grip with aluminum clamping ring for fastening onto the handlebar – Laborious process of gluing and securing grips with safety wire is no longer necessary

548.02.021.000  548.02.021.100 

790.02.923.000 

OPEN END

SX / XC 17 – 20 SX-F / XC-F 16 – 20 XC-W 17 – 20 XCF-W 20 EXC-F 17 – 20

790.02.121.100 

SOFT MEDIUM

GRIP SET The special half-waffle grip has been developed to meet the demands and preferences of our Factory riders, with the clear objectives: comfort AND optimal grip – because no calluses on the palms and secure grip mean less stress when riding. The benefits: – Ergonomic; contour matched to the shape of the hand for maximum comfort – Small “half waffle” ribs on the rear for a secure grip – Made from two materials with different grades of hardness – Available in two versions (soft and medium) – Three areas for the metal safety wire

OPEN END

CLOSED END

GRIP SET The KTM 2K (2K = 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips. – Harder orange material on the inside and at the grip ends for a long service life – Softer black material on the outside, where the hand lies on the grip, for increased comfort

630.02.021.200 

OPEN END

GRIP SET The KTM 2K (2K = 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips. – Harder orange material on the inside and at the grip ends for a long service life – Softer black material on the outside, where the hand lies on the grip, for increased comfort – With open grip ends for closed handguards or bar ends

SX / XC 17 – 20 SX-F / XC-F 16 – 20 XC-W 17 – 20 XCF-W 20 EXC-F 17 – 20

790.02.923.100 

630.02.021.100 

OPEN END

SX / XC 17 – 20 SX-F / XC-F 16 – 20 XC-W 17 – 20 XCF-W 20 EXC-F 17 – 20 LOCK-ON GRIP SET – Grip replacement made easy – Right grip permanently glued onto the throttle grip – Left grip with aluminum clamping ring for fastening onto the handlebar – Laborious process of gluing and securing grips with safety wire is no longer necessary – Open grip ends for mounting closed handguards

000.62.030.051  GRIP GLUE Perfect hold for your grips. Contents: 20 g.

025


HANDLEBAR + INSTRUMENTS / ELECTRIC GRIPS

791.12.917.044  125/150 SX / XC 19 – 20 250 SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20 GRIP HANDLE – High-strength aluminum grip – Indispensable for use on extreme terrain – Makes it easy to get your bike upright – Attaches to silencer bracket on the subframe

790.02.013.100  781.02.922.000  MUD GRIPS The mud grips are simply pulled over existing grips and provide a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix.

SX / XC 17 – 20 SX-F / XC-F 16 – 20 XC-W 17 – 20 XCF-W 20 EXC-F 17 – 20

787.12.916.000  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

THROTTLE TUBE This gives you the option of using traditional grips on models that come standard with lock-on grips.

SUPPORTING STRAP (FRONT) – High-strength nylon strap – Indispensable for use on extreme terrain – Attaches to fork tubes

781.12.964.000  U695.1716 

SXS.05.125.600 

GRIP DONUT SET Optimum protection against thumb blisters with these coated neoprene rings. Simply slide onto the grips.

GRIP PROTECTION SET Helps prevent dirty grips.

13 – 20 13 – 20 14 – 20 14 – 20

XC-W XCF-W EXC-F GRIP HEATER Provides warm hands, even in bad weather. Can only be fitted by an authorized KTM dealer. We recommend the use of the auxiliary wiring harness 777.11.979.000 for installation.

797.12.917.000  SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20 SUPPORTING STRAP (REAR) – High-strength nylon strap – Indispensable for use on extreme terrain – Makes it easy to get your bike upright – Attaches to rear frame

027


HANDLEBAR + INSTRUMENTS / ELECTRIC LEVERS

DO YOU KNOW about the benefits of forged brake and clutch levers from KTM PowerParts? – Manufactured from high-strength aluminum, forged and then CNC-machined – This extensive production process provides a long service life and a precise fit – Ergonomically perfected shape (the result of years of racing experience) – Predefined breaking point – Anodized orange

Ever had to give up during a race because of a broken clutch or brake lever? Minimize the possibility of that happening with these levers that are designed to fold away upon contact with the ground.

787.02.931.044 / 04 

BREMBO®

787.13.902.044 / 04 

BREMBO®

780.02.931.200 / 04 

BREMBO®

787.13.992.044 / 04 

BREMBO®

SX / XC 06 – 20 SX-F / XC-F 06 – 20 XC-W 06 – 20 XCF-W 06 – 20 EXC-F 06 – 20

SX / XC 14 – 20 SX-F / XC-F 14 – 20 XC-W 14 – 20 XCF-W 14 – 20 EXC-F 14 – 20

SX / XC 06 – 20 SX-F / XC-F 06 – 20 XC-W 06 – 20 XCF-W 06 – 20 EXC-F 06 – 20

SX / XC 14 – 20 SX-F / XC-F 14 – 20 XC-W 14 – 20 XCF-W 14 – 20 EXC-F 14 – 20

FLEX CLUTCH LEVER Suitable for all hydraulic Brembo® clutch systems.

FLEX BRAKE LEVER Suitable for all hydraulic Brembo® brake systems.

CLUTCH LEVER Suitable for all hydraulic Brembo® clutch systems.

BRAKE LEVER Suitable for all hydraulic Brembo® brake systems.

029


HANDLEBAR + INSTRUMENTS / ELECTRIC HANDGUARDS

603.02.179.100 / 30 603.02.179.000 / EB 603.02.179.100 / AB 780.02.079.200 / 30 780.02.079.100 / EB 780.02.079.200 / AB

HIGH VERSION HIGH VERSION HIGH VERSION LOW VERSION

791.02.984.000 

LOW VERSION

SX / XC SX-F / XC-F XC-W XCF-W EXC-F

LOW VERSION

SX / XC – 20 SX-F / XC-F – 20 XC-W – 20 XCF-W – 20 EXC-F – 20

14 – 20 14 – 20 14 – 20 14 – 20 14 – 20

WRAP-AROUND HANDGUARD KIT – Made of sturdy plastic – Converts the originally open handguards into a closed version – Mounting independent of the lever mounting, mounts directly to the handlebar – Also compatible with handguards 796.02.979.000 / EB / AB / 30 and 721.02.979.000 / EB / AB / 30

WRAP-AROUND HANDGUARD KIT The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights. Cannot be used with Twinwall handlebars.

796.02.979.044 

797.02.984.044 

SX / XC SX-F / XC-F XC-W XCF-W EXC-F

SX / XC SX-F / XC-F XC-W XCF-W EXC-F

14 – 20 14 – 20 14 – 20 14 – 20 14 – 20

WRAP-AROUND HANDGUARD KIT – Made of sturdy plastic – Converts the originally open handguards into a closed version – Also compatible with handguards 796.02.979.000 / EB / AB / 30 and 721.02.979.000 / EB / AB / 30

14 – 20 14 – 20 14 – 20 14 – 20 14 – 20

WRAP-AROUND HANDGUARD KIT – Made of high-strength aluminum – Converts the originally open handguards into a closed version – Mounting independent of the lever mounting, mounts directly to the handlebar – Also compatible with handguards 796.02.979.000 / EB / AB / 30 and 721.02.979.000 / EB / AB / 30

031


HANDLEBAR + INSTRUMENTS / ELECTRIC HANDGUARDS

791.02.979.000 / EB 791.02.979.000 / AB 791.02.979.000 / 30 SX / XC SX-F / XC-F XC-W XCF-W EXC-F

796.02.979.000 / EB 796.02.979.000 / AB 796.02.979.000 / 30

14 – 20 14 – 20 14 – 20 14 – 20 14 – 20

SX / XC SX-F / XC-F XC-W XCF-W EXC-F

WRAP-AROUND HANDGUARD KIT – Made of sturdy plastic – Handguards 796.02.182.044 included in kit – Mounting independent of the lever mounting, mounts directly to the handlebar

14 – 20 14 – 20 14 – 20 14 – 20 14 – 20

HANDGUARD KIT Thanks to splitting of the surfaces, these open, very light KTM (MX) handguards ensure an uncompromising race look in the angular KTM design. Featuring two-component injection moulding technology: – Black center section = maximum strength for optimum protection – Colored upper and lower sections = highly flexible for enduring the roughest of treatment – The choice is yours: attach directly to the handlebar with a plastic bracket or directly to the lever mounts with a special adaptor – Cannot be fitted with a Twinwall handlebar, attaches directly at the levers with a special mount

797.02.979.000 / EB 797.02.979.000 / AB 797.02.979.000 / 30 SX / XC SX-F / XC-F XC-W XCF-W EXC-F

14 – 20 14 – 20 14 – 20 14 – 20 14 – 20

WRAP-AROUND HANDGUARD KIT This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame helps provide excellent mobility together with maximum protection against impact, roost, branches, etc.

797.02.988.044  SX / XC SX-F / XC-F

14 – 20 14 – 20

HANDGUARD BUSHING KIT – Provides additonal space between hand brake cylinder and wrap around handguard kit 797.02.984.044 – Increases the space between aluminum guard and hand brake cylinder

033


HANDLEBAR + INSTRUMENTS / ELECTRIC HANDLEBARS B

A C

Ø 22,15

Ø 28,5

RENTHAL TWINWALL HANDLEBAR The Twinwall, in a KTM orange design, combines two handlebars into one: An exterior provides maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to help protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls, resulting in weight savings and a a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes prevent the ingress of water, dirt, cleaning agents and other contaminants. Comes with a handlebar bar pad.

795.02.901.000 / 04  RENTHAL TWINWALL 996 Dimensions: A = 118 mm, B = 811 mm, C = 74 mm

U695.1393  RENTHAL TWINWALL 999 Dimensions: A = 104 mm, B = 811 mm, C = 74 mm

548.02.001.300 / 04  HANDLEBAR DO YOU KNOW that KTM handlebars must withstand very extensive and specially developed test cycles before they go to market? The facts: – All KTM handlebars are made from EN AW 7010 T6 aluminum – 28.5 mm diameter in the clamping area – 22.15 mm diameter in the lever area – Position markings for simple setting – Dimensions: A = 115 mm, B = 806 mm, C = 62 mm

035


HANDLEBAR + INSTRUMENTS / ELECTRIC HANDLEBAR SUPPORT

790.01.939.031  31 MM 790.01.139.036  36 MM 790.01.939.041  41 MM 790.01.939.046  46 MM 790.01.939.051  51 MM SX / XC SX-F / XC-F

16 – 20 16 – 20

HANDLEBAR MOUNT

789.01.939.044  789.01.939.144  789.01.939.244  789.01.939.344  789.01.939.444  XC-W XCF-W EXC-F

32 MM 37 MM 42 MM 47 MM 52 MM

13 – 20 13 – 20 13 – 20

HANDLEBAR MOUNT KIT Available in five different heights. Kit includes 2x handlebar support lower parts and 2x fastening bolts. Please note, upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.

548.01.043.020  20 MM

XC-W XCF-W EXC-F

XC-W XCF-W EXC-F

HANDLEBAR RISER These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.

XC-W XCF-W EXC-F

13 – 20 13 – 20 13 – 20

PROGRESSIVE HANDLEBAR DAMPING SYSTEM (PHDS) The CNC-machined handlebar mounting with cushioning rubber inserts relieves wrist and shoulder joints. Further benefits of the PHDS: – Helps cushion and absorb heavy hits – Absorbs chassis and engine vibrations – Additional handlebar damping on the horizontal axis – Optimum steering precision – Handlebar height adjustable to 2 positions – Further damping elements available in three degrees of hardness (soft, medium, hard) for individual customization

790.01.939.500  SX / XC SX-F / XC-F

16 – 20 16 – 20

PROGRESSIVE HANDLEBAR DAMPING SYSTEM (PHDS) The CNC-machined handlebar mounting with cushioning rubber inserts relieves wrist and shoulder joints. Further benefits of the PHDS: – Helps cushion and absorb heavy hits – Absorbs chassis and engine vibrations – Additional handlebar damping on the horizontal axis – Optimum steering precision – Handlebar height adjustable to 2 positions – Further damping elements available in three degrees of hardness (soft, medium, hard) for individual customization

UPP.15.02.035

777.01.939.010  10 MM 777.01.939.020  20 MM 777.01.939.030  30 MM 13 – 20 13 – 20 13 – 20

SXS.07.125.200 

22 MM CLAMPS (NON-RUBBER MOUNTED)

UPP.15.02.036 – 20 – 20 – 20

HANDLEBAR RISER Can only be fitted in combination with handlebar support 590.01.039.100 (standard on EXC models up to MY 2011).

20 MM CLAMPS

790.01.940.144 

UPP.15.02.037

SX / XC SX-F / XC-F

SX / XC  SX-F / XC-F 

16 – 20 16 – 20

HANDLEBAR MOUNT BUSHING KIT With this bushing kit you can convert the standard damped handlebar support on your bike to a rigid handlebar support.

16 – 20 16 – 20

GPR V4 STABILIZER KIT Constructed from high-quality billet aluminum and used by our KTM Factory Offroad Race Team. Raises the bar height by 13 mm. Post mount included.

037


HANDLEBAR + INSTRUMENTS / ELECTRIC STEERING DAMPER

790.12.970.100 SX / XC SX-F / XC-F

BRACKET FOR STEERING DAMPER

770.12.005.144 XC-W XC-F-W / EXC-F

16 – 20 16 – 20

12 – 20 12 – 20

CLAMP FOR FACTORY STEERING DAMPER

770.12.005.000

585.12.050.100

FACTORY STEERING DAMPER Increased stability at the front forks under high speeds. This extremely light and fully adjustable KTM steering damper offers top performance for the price. The sophisticated damper mounting allows for individual steering adjustments even after installation. Low design profile.

770.12.005.644 790.12.970.100 SX / XC SX-F / XC-F

16 – 20 16 – 20

PHDS CLAMP FOR FACTORY STEERING DAMPER This bracket is required for fitting the progressive handlebar damping system (PHDS) SXS.07.125.200 in conjunction with factory steering damper 770.12.005.000 or steering damper 585.12.050.100, whereby the latter is only permissible if steering damper clamp 585.12.050.144 or 585.12.050.544 is used.

STEERING DAMPER Have you ever had the handlebars ripped out of your hands? This high-end steering damper helps provide maximum control on fast tracks and offers a significant increase in stability! Further advantages: – Extremely lightweight – Sensitive feedback behavior – High speed settings – Optimum 25 click setting range Proven success with the KTM Factory Rally Team. Fits on all SX and EXC models.

772.12.905.444 XC-W XC-F-W / EXC-F

12 – 20 12 – 20

BRACKET FOR STEERING DAMPER

BRACKET FOR FACTORY STEERING DAMPER

772.12.905.444

790.12.950.200

SX / XC  – 15 XC-W / EXC 12 – 18

SX / XC SX-F / XC-F

BRACKET FOR FACTORY STEERING DAMPER

CLAMP FOR FACTORY STEERING DAMPER

16 – 20 16 – 20

585.12.050.144

790.12.960.100

XC-W  XC-F-W / EXC-F

SX / XC SX-F / XC-F

12 – 20 12 – 17

CLAMP FOR STEERING DAMPER

16 – 20 16 – 20

CLAMP FOR STEERING DAMPER

039


HANDLEBAR + INSTRUMENTS / ELECTRIC INSTRUMENTS / ELECTRIC

777.11.979.000  SX / XC  – 20 SX-F / XC-F  – 20 XC-W  – 20 XCF-W / EXC-F  – 20

781.12.920.000  HOUR METER Know exactly when your next service is due.

AUXILIARY WIRING HARNESS We recommend using this aditional wiring harness with all powered accessories. With this wiring harness, you also have the option of fitting such powered accessories as grip heaters or fans to your XC / XC-W / EXC. Please note: The power consumer is now connected directly to the battery. Y-distributor switch 777.11.979.010 or 777.11.979.044 is also recommended to control power to added accessories.

781.12.920.044  SX / XC  – 20 SX-F / XC-F  – 20 XC-W  – 20 XCF-W / EXC-F  – 20 HOUR METER BRACKET Allows for hour meter 781.12.920.000 to be mounted onto the triple clamp.

515.39.974.200  CCCUO 2-STROKE  – 20 IGNITION CURVE SWITCH Ignition curve adjustments made easy! With this switch, you can change the ignition curve conveniently from the handlebar on models featuring a digital box with pre-programmed ignition curves (whether or not your KTM has pre-programmed ignition curves can be found in the motorcycle owner’s manual).

777.11.979.010 

777.11.979.044 

SX / XC  – 20 SX-F / XC-F  – 20 XC-W  – 20 XCF-W / EXC-F  – 20

SX / XC  – 20 SX-F / XC-F  – 20 XC-W  – 20 XCF-W / EXC-F  – 20

SUPPLEMENTARY WIRING HARNESS The supplementary wiring harness allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000.

SUPPLEMENTARY WIRING HARNESS The supplementary wiring harness allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.

CLOSED COURSE / COMPETITION USE ONLY

041


HANDLEBAR + INSTRUMENTS / ELECTRIC SPECIAL PARTS

548.02.005.000  SXS.07.250.800 

HANDLEBAR ENDS Helps protect rubber grips from grazing in the event of a fall.

HANDLEBAR PAD Provides optimum protection in traditional KTM racing style.

502.12.040.000 / 30  CCCUO XC-W  – 20 XCF-W  – 20 MIRROR Left-hand version, light and robust. CLOSED COURSE / COMPETITION USE ONLY

790.02.901.050 

777.02.944.000 

HANDLEBAR PAD Provides optimum protection with an added time card slot. A small extra pocket allows you to stow additonal small items. Can also be fitted in combination with the progressive handlebar damping system (PHDS) support.

CLAMP – Includes plastic insert – The brake or clutch control rotates in the case of a minor fall – Reduces the risk of a lever being broken – Suitable for all Brembo® brake and clutch systems

043


HANDLEBAR + INSTRUMENTS / ELECTRIC SPECIAL PARTS

796.14.901.000  CCCUO XC-W XCF-W

14 – 20 14 – 20

LED-HEADLIGHT – LED technology, specially developed for the XC-W range – High power light – Light intensity 1500 Lumen – Light color approx. 5500 Kelvin – Exceptionally robust – Can be installed within the standard headlight mask CLOSED COURSE / COMPETITION USE ONLY

045


CNC ANODIZED PARTS ENGINE

792.35.952.044  DID YOU KNOW that all KTM CNC parts are manufactured from the highest grade of aluminum, and therefore not only look great, but can also withstand the toughest of treatments? The original factory look, anodized aluminum KTM PowerParts are just the thing to give your KTM that something special.

792.38.904.044  250/350 SX-F / XC-F 16 – 20 250/350 EXC-F 17 – 20 350 XCF-W 20

504.37.905.044  125/150 SX 150 XC-W

16 – 20 17 – 20

FACTORY CONTROL COVER

250/350 SX-F / XC-F 16 – 20 250/350 EXC-F 17 – 20 350 XCF-W 20 FACTORY WATER PUMP COVER The weight optimized water pump cover ensures maximum water flow.

504.30.926.044  125/150 SX 150 XC-W

16 – 20 17 – 20

FACTORY OUTER CLUTCH COVER

794.38.904.044  450 SX-F / XC-F 450/500 EXC-F 500 XCF-W

16 – 20 17 – 20 20

FACTORY OIL PUMP COVER

794.35.952.044  450 SX-F / XC-F 450/500 EXC-F 500 XCF-W

548.37.905.044  250 SX / XC 250 XC-W 300 XC / XC-W

07 – 20 07 – 20 08 – 20

FACTORY CONTROL COVER

772.30.902.144 

16 – 20 17 – 20 20

FACTORY WATER PUMP COVER The weight optimized water pump cover ensures maximum water flow.

250/350 SX-F / XC-F 11 – 20 250/350 XCF-W / EXC-F 12 – 20

255.30.826.000  250/350 SX-F / XC-F 16 – 20 250/350 EXC-F 17 – 20 350 XCF-W 20 HINSON OUTER CLUTCH COVER – Manufactured from high grade aluminum – Hard anodized, extreme durable surface

FACTORY IGNITION COVER PLUG

554.30.926.044  250/300 SX / XC 250/300 XC-W

FACTORY OUTER CLUTCH COVER

773.38.941.044  250 SX-F / XC-F 350 SX-F / XC-F 450 SX-F / XC-F 350 XCF-W / EXC-F 450/500 EXC-F 500 XCF-W

13 – 20 11 – 20 16 – 20 12 – 20 17 – 20 20

FACTORY OIL FILTER COVER

17 – 20 17 – 20

MOTOREX DECAL NOT INCLUDED

504.35.952.044  125/150 SX 150 XC-W

16 – 20 17 – 19

FACTORY WATER PUMP COVER The weight optimized water pump cover ensures maximum water flow.

261.30.826.000  450 SX-F / XC-F 450/500 EXC-F 500 XCF-W

16 – 20 17 – 20 20

HINSON OUTER CLUTCH COVER – Manufactured from high grade aluminum – Hard anodized, extreme durable surface

794.30.920.044  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F FACTORY OIL PLUG

047


CNC ANODIZED PARTS CHASSIS

777.07.908.244  794.13.951.000  125/150 SX / XC 16 – 20 250 SX / XC 17 – 20 SX-F / XC-F 16 – 20 XC-W / XCF-W / EXC-F 17 – 20

SX SX-F

13 – 20 13 – 20

FACTORY FUEL TANK CAP

790.13.961.000 

STEP PLATE FOR BRAKE LEVER Wider contact surface than standard: – +8 mm on 125 / 150 SX / XC-W, SX-F, 450 / 500 EXC-F – +16 mm on 250 / 300 SX / EXC, 250 / 350 EXC-F

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

781.07.908.144  XC-W 13 – 20 XCF-W 20

04 – 20 04 – 20 04 – 20 04 – 20

REAR BRAKE RESERVOIR EXTENDER – Increases the volume of the foot brake cylinder – The surface structure aids in cooling the brake fluid – Eliminates dangerous “fading” almost completely – Space requirements: Total height including cover approx. 26.5 mm

FACTORY FUEL TANK CAP

794.34.931.044  125/150 SX / XC 16 – 20 250 SX / XC 17 – 20 SX-F / XC-F 16 – 20 XC-W / XCF-W / EXC-F 17 – 20 STEP PLATE FOR SHIFTING LEVER 6 mm wider contact surface than standard.

SXS.05.450.210  BREMBO

®

SX / XC  – 20 SX-F / XC-F  – 20 XC-W  – 20 XCF-W / EXC-F  – 20 HAND BRAKE CYLINDER AND HYDRAULIC CLUTCH COVER

791.01.920.000 / 04 

U695.1981  U695.1010 

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

04 – 20 04 – 20 04 – 20 04 – 20

FACTORY FUEL CAP VENT

REAR BRAKE RESERVOIR CAP

SX / XC 16 – 20 SX-F / XC-F 16 – 20 XC-W 20 XCF-W / EXC-F 20 COMPRESSION ADJUSTER

049


PLASTIC PARTS + DECALS PLASTIC PARTS

777.01.094.100 / EB 777.01.094.100 / AB

791.06.004.000 / EB 791.06.004.000 / AB

791.06.001.000 / EB 791.06.001.000 / AB

XC-W 20 XCF-W / EXC-F 20

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

125/150 SX / XC 16 – 20 250/300 SX / XC 17 – 20 SX-F / XC-F 16 – 20 XC-W 17 – 20 XCF-W 20 EXC-F 17 – 20

HEADLIGHT MASK

AIR BOX SIDE COVER

AIR BOX LOWER

FORK PROTECTOR SET

791.06.003.000 / EB 791.06.003.000 / AB

791.06.001.010 / EB 791.06.001.010 / AB

791.06.005.000 / EB 791.06.005.000 / AB

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

AIR BOX COVER

AIR BOX FRONT

SIDE FAIRING

797.08.001.000 / EB 797.08.001.000 / AB

791.08.013.000 / EB 791.08.013.000 / AB SX / XC 19 – 20 SX-F / XC-F 19 – 20 REAR FENDER

797.08.013.000 / EB 797.08.013.000 / AB XC-W 20 XCF-W / EXC-F 20 REAR FENDER

791.06.903.000 / EB 791.06.903.000 / AB 791.08.007.000 / EB 791.08.007.000 / AB SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20 FRONT NUMBER PLATE

HIGH FLOW HIGH FLOW

791.08.054.000 / EB1 791.08.054.000 / AB

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

AIR BOX COVER

SHROUD SET

790.08.010.000 / EB 790.08.010.000 / AB 125/150 SX / XC 16 – 20 250/300 SX / XC 17 – 20 SX-F / XC-F 16 – 20 XC-W 17 – 20 XCF-W 20 EXC-F 17 – 20 FRONT FENDER

051


PLASTIC PARTS + DECALS DECALS

795.08.990.000  SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20 FACTORY GRAPHICS KIT Stock just isn’t your thing? Customize your own jaw-dropping motorcycle and stand out from the competition. Rim sticker set not included.

053


PLASTIC PARTS + DECALS DECALS

796.08.978.000  STICKER SHEET KTM stickers, made from robust material to stick onto your bike, car, trailer, etc. Contains 5 sheets.

777.02.990.000  HANDGUARD STICKER SET For use with handguard kits 777.02.079.000 / 04 / 28 / 30, 777.02.179.000 / 04 / EB / 28 / 30, 765.02.979.000 / 04 / 28 / 30 and 796.02.979.000 / 04 / EB / 28 / 30.

797.08.990.000 

791.08.999.000 

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

SIX DAYS GRAPHICS KIT “PORTUGAL”

RADIATOR LOUVER STICKERS

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

322.200  322.201  322.202  322.203  322.204  322.205  322.206  322.207  322.208  322.209 

NUMBER PLATE BACKGROUNDS 4 parts

BLACK NUMBERS 5” tall, 3 pieces each.

797.08.988.100 / C1 797.08.988.100 / AB 797.08.988.100 / 38 797.08.988.100 / 67 797.08.988.100 / 80

0 1 2 3 4 5 6 7 8 9

322.100  322.101  322.102  322.103  322.104  322.105  322.106  322.107  322.108  322.109 

0 1 2 3 4 5 6 7 8 9

WHITE NUMBERS 5” tall, 3 pieces each.

790.01.994.050  SX / XC 15 – 20 SX-F / XC-F 15 – 20 XC-W 16 – 20 XCF-W 20 EXC-F 16 – 20 FORK PROTECTOR STICKER SET Can be used on open fork protectors.

055


SEATS

791.07.940.000 

-15 MM SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

HIGH SEAT Specially designed for riders over 5’10” tall. Approx. 20 mm higher than the standard seat.

LOW SEAT Provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15 mm lower than the standard seat.

791.07.940.100 

791.07.940.400  SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

791.07.940.200 

+20 MM SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

791.07.940.500 

+35 MM SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

EXTRA HIGH SEAT Specially designed for riders over 6’2” tall. Approx. 35 mm higher than the standard seat.

SOFT SEAT Highly elastic foam for extra added comfort. Standard height.

STEP-UP SEAT The seat of factory riders, due to the special step there’s no slipping backwards even when opening up the throttle. Standard height.

791.07.940.300  SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20 WAVE SEAT This seat provides great freedom of movement, but still offers a perfect hold. The “wave” surface acts as a step even though it isn’t one. Standard height. Ridges slightly higher than the standard seat.

794.07.978.000  SEAT POCKET Recommended for storing your timecard during races. Stick it directly to the seat with grip glue.

057


SEATS

791.07.040.100 SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20 FACTORY SEAT Standard height

059


FOOTPEGS

790.03.940.044  125/150 SX / XC 250/300 SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

16 – 20 17 – 20 16 – 20 17 – 20 20

AKRAPOVIČ FOOTPEG SET 41% lighter with the same step area as the standard footpegs. These titanium footpegs were developed to the specifications of our KTM Factory riders. Use of the special titanium alloy also allows wear to be reduced to a minimum. When installed on EXC / XC-W models, the titanium footpeg sits 6 mm lower than the production footpegs.

548.03.095.000  FOAM For extremely muddy conditions.

061


TANKS

797.07.913.044  CCCUO

11.5 LTR

XC TPI 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W 20

790.07.913.044 

FUEL TANK Comes with adapters for mounting your stock shrouds. Fuel cap not included.

781.07.990.100  XC-W 13 – 20 XCF-W / EXC-F 13 – 20

CLOSED COURSE / COMPETITION USE ONLY

791.07.913.044  CCCUO

10 LTR

FUEL FILTER Filter fits directly in the tank opening. This means that no dirt enters the fuel tank or the injection system during refueling. Fits on all 3/4” fuel tank caps.

SX-F / XC-F 19 – 20 XCF-W 20

250/300 XC-W TPI 18 – 20 SX -F / XC-F 13 – 20 XCF-W / EXC-F 12 – 20 FUEL CONNECTION The fuel connection machined from plastic and aluminum. Cleverly designed, after joining with the fuel coupler, the coupler is secured by simply twisting the connector so that undesired opening is eliminated.

FUEL TANK Prepared for IMS Quick Fill System. For use without the IMS System, the flange 797.07.913.055 is included in the kit to use the stock fuel cap. CLOSED COURSE / COMPETITION USE ONLY

555.07.913.044  CCCUO 125/150 SX 250 SX

11.5 LTR

19 – 20 19 – 20

FUEL TANK Fuel cap not included. CLOSED COURSE / COMPETITION USE ONLY

777.07.988.017 

793.07.913.044  CCCUO SX-F / XC-F

8 LTR

19 – 20

SX-F 13 – 20 150/250/300 XC-W TPI 18 – 20 XCF-W / EXC-F 12 – 20

772.31.997.000 / 04 

FACTORY FUEL PUMP CONNECTION The factory fuel pump connection – also used by KTM Factory riders – allows the fuel hose to be routed closer along the engine, thereby preventing the fuel hose from being pulled off unintentionally during offroad use.

VENT HOSE Fuel-proof for tank and carburetor venting, approx. 3 m. Should only be used for venting purposes and not as a connection between tank and carburetor.

3M

FACTORY FUEL TANK Motorsport fuel tank. Comes with aluminum fuel cap. CLOSED COURSE / COMPETITION USE ONLY

063


SUSPENSION

791.01.999.021 / 04  SX / XC SX-F / XC-F

13 – 20 13 – 20

FACTORY TRIPLE CLAMP – Made from high-grade aluminum – Optimally tuned steering stem stiffness – 100% alignment of the fork tubes – Ideal flexibility – precisely customized to the WP fork – Specially optimized geometry of the fork clamping – No ovalization of the fork outer tubes – Highly precise and smooth fork response –M  aximum gain in handling, and at the same time, stability in the front wheel with overall more homogeneous effects of force in the complete vehicle – Very simple offset adjustment of 20 or 22 mm – Shorter offset: Stability on fast straights – Longer offset: faster and tighter steering into corners – Includes steering stem with steering head bearing already pressed on For use on offroad models, please order one of the following set articles: 000.10.000.295 or 000.10.000.296 or 000.10.000.297

065


SUSPENSION

000.10.000.295  XC-W 14 – 20 XCF-W / EXC-F 14 – 20

781.01.999.020 / 04 781.01.999.022 / 04 SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

20 MM OFFSET 22 MM OFFSET

13 – 20 13 – 20 14 – 20 14 – 20

TRIPLE CLAMP – Manufactured from the highest grade of aluminum – Optimally tuned steering stem stiffness – 100% alignment of the fork tubes – Perfect flexibility – adapted precisely to the WP forks –S  upplied with steering stem and with the steering head bearing already pressed on Required items for installation on SX models from model year 2016: – Handlebar mount kit 789.01.939.044 / 144 / 244 / 344 / 444 or progressive handlebar damping system (PHDS) SXS.07.125.200

FACTORY TRIPLE CLAMP KIT – Complete kit needed to update your KTM with our new motocross factory triple clamp – Includes factory triple clamp 791.01.999.021.04 – Made from high-grade aluminum – Optimally tuned steering stem stiffness – 100 % alignment of the fork tubes – Ideal flexibility – precisely customized to the WP forks – Specially optimized geometry of the fork clamping – No ovalization of the fork outer tubes – Highly precise and smooth fork response – Maximum gain in handling, and at the same time, stability in the front wheel with overall more homogeneous effects of force in the complete vehicle – Very simple offset adjustment of 20 or 22 mm – Shorter offset: Stability on fast straights – Longer offset: Faster and tighter steering into corners – Includes steering stem with steering head bearing already pressed on

790.01.996.000 

791.01.996.000 

SX / XC 15 – 20 SX-F / XC-F 15 – 20 XC-W 16 – 20 XCF-W 20 EXC-F 16 – 20

SX / XC 15 – 20 SX-F / XC-F 15 – 20 XC-W 16 – 20 XCF-W 20 EXC-F 16 – 20

FACTORY START – CNC-machined from high-strength aluminum – Helps prevent lifting of the front wheel when starting – Ensures more traction at the rear wheel

FACTORY START – CNC-machined from high-strength aluminum – Two different preload settings, without additional effort in mounting – Helps prevent lifting of the front wheel when starting – Provides more traction at the rear wheel – Simple mounting of the fork ring due to a two part design – Removal of fork no longer necessary

067


SUSPENSION

000.10.000.296 

000.10.000.297 

XC-W 14 – 20 XCF-W / EXC-F 14 – 20

XC-W 14 – 20 XCF-W / EXC-F 14 – 20

FACTORY TRIPLE CLAMP / STEERING DAMPER KIT Add to your KTM all the advantages of our new factory triple clamp in combination with the highly approved Scotts steering damper. This kit contains all necessary components, including new factory triple clamp and Scotts steering damper: – 000.10.000.295 Factory triple clamp kit for enduro – 585.12.050.100 Scotts steering damper – 790.12.970.100 Counter bearing for steering damper – 790.12.960.100 Bracket for Scotts steering damper

FACTORY TRIPLE CLAMP / STEERING DAMPER KIT Add to your KTM all the advantages of our new factory triple clamp in combination with the highly approved KTM factory steering damper. This kit contains all necessary components, including new factory triple clamp and factory steering damper: – 000.10.000.295 Factory triple clamp kit for offroad – 770.12.005.000 KTM factory steering damper – 790.12.970.100 Counter bearing for steering damper – 790.12.950.100 Bracket for factory steering damper

069


SUSPENSION

796.04.905.000  XC-W XCW-F / EXC-F

796.12.955.144  XC-W XCW-F / EXC-F

-20 MM

17 – 20 17 – 20

LOWERING KIT The low suspension kits specially developed by KTM in collaboration with WP Suspension are the perfect compromise between maximum chassis performance and minimum possible seat height. Just like the standard parts, the components used here are manufactured from the highest quality of materials and have been specially tuned for offroad use in intensive endurance tests. To ensure the best possible function of the suspension kits, we only recommend use with a rider weight of up to 175 lbs.

17 – 20 17 – 20

PRELOAD ADJUSTER Quick, precise chassis adjustments and improved appearance with the preload adjuster for the shock absorber. The main benefits: – Quick preload adjustment – Use of the entire thread length on the shock absorber – Very simple to use – Lightweight – Dirt-resistant – Mechanical drive mechanism The shock absorber must be disassembled for installation.

797.01.905.000  XC-W 20 XCW-F / EXC-F 20 PRELOAD ADJUSTER SET Allows for external setting of the spring preload.

796.12.955.544  XC-W XCW-F / EXC-F

-50 MM

17 – 20 17 – 20

LOWERING KIT The low suspension kits specially developed by KTM in collaboration with WP Suspension are the perfect compromise between maximum chassis performance and minimum possible seat height. Just like the standard parts, the components used here are manufactured from the highest quality of materials and have been specially tuned for offroad use in intensive endurance tests. To ensure the best possible function of the suspension kits, we only recommend use with a rider weight of up to 175 lbs.

790.04.905.000  125/150 SX 250/300 SX / XC SX-F / XC-F

16 – 20 17 – 20 16 – 20

PRELOAD ADJUSTER Quick, precise chassis adjustments and improved appearance with the preload adjuster for the shock absorber. The main benefits: – Quick preload adjustment – Use of the entire thread length on the shock absorber – Very simple to use – Lightweight – Dirt-resistant – Mechanical drive mechanism The shock absorber must be disassembled for installation.

791.01.900.000  SX / XC 16 – 20 SX-F / XC-F 16 – 20 XC-W 20 XCF-W / EXC-F 20 BLEEDER VALVE Bleeder valve designed especially for WP forks. A quick press of the finger and the fork is bled.

071


WP XACT / XPLOR PRO 7548 Fork

WP XACT PRO 7548 Fork

The WP XACT PRO 7548 fork permits almost limitless damping performance due to a unique valving system. The setup of a conventional damping system has always been a compromise between sufficient comfort and bottoming reserves, whereas the Cone Valve technology now permits a combination of both factors, resulting in outstanding damping behavior in all driving situations. The WP Cone Valve Fork comes made to measure for every customer and is made of the highest quality materials and coatings which have been developed in close collaboration with current World Championship riders of KTM. Enjoy the riding experience with our top of the line suspension.

CONQUER THE TOUGHEST TERRAIN! WP Suspension offers a XACT PRO 7548 and XPLOR PRO 7548 Fork with Cone Valve Technology for all KTM SX, EXC, XC and XC-W models. The WP cone valve fork uses an off-road setting that combines comfort, damping and durability to offer the following benefits: • • • • •

WWW.WP-SUSPENSION.COM

 P Cone Valve can always open further which reduces harshness W More comfort when using harder set-up The cone valve prevents any loss of damping from bent shims No sealing surface, so minimum drop of pressure after valve opens The WP Authorized Center can adjust the fork according to your needs

• • • • • •

 ore comfort when using harder set-ups M All adjustments made externally No sealing surface so minimum drop of pressure after valves opens Unlimited opening up of WP Cone Valve so harshness reduced No shims, therefore no loss of damping because of bent shims HQ coating

HOW TO ORDER These WP PRO COMPONENTS are available only directly via your WP Authorized Center Network. To find the right article number for your bike, visit the suspension configurator at www.wp-suspension.com/product-finder or directly search for your authorized center at www.wp-suspension.com/authorized-centers.


WP Bladder Kit

The WP Bladder Kit for the standard WP MX Link Shock, MY2016 and newer, converts the piston-style reservoir into a bladder and improves the performance by: • Resisting fading • Decreasing moving parts and friction • Improving and smoothening the ride This Bladder Kit is now also available in different versions for WP XACT PRO and XPLOR PRO shocks.

WP XACT PRO 8950 Shock

RIDE HARDER WWW.WP-SUSPENSION.COM

The WP XACT PRO 8950 Shock Absorber has already proven its worth with KTM Factory riders, resulting in multiple world championship titles. They represent the most innovative shock absorbers on the market and feature Supertrax Technology, which allows adjustment to the high- and low-speed rebound damping. WP has developed the Supertrax system, which registers when the rear wheel is airborne after a bump. It immediately activates an oil bypass so the rebound can expand faster than a conventional system. The benefits of the Supertrax Technology are: • TXN adjuster provides, more rebound damping and control • Bladder improves the ride and makes it smoother • You feel more confident and you have more comfort • You feel more grip traction of the rear wheel, you accelerate faster • The rider experiences much less physical strain

HOW TO ORDER These WP PRO COMPONENTS are available only directly via your WP Authorized Center Network. To find the right article number for your bike, visit the suspension configurator at www.wp-suspension.com/product-finder or directly search for your authorized center at www.wp-suspension.com/authorized-centers.


WHEELS OFFROAD

790.10.901.044 / 04  CCCUO FACTORY REAR WHEEL 2.15" X 19" – Anodized D.I.D DirtStar rim – an ideal compromise between rigidity and flexibility – Anodized from the full milled hub – specially developed and coordinated to the properties of the D.I.D DirtStar rim – Maximum weight savings compared to standard wheels – Maximum gain in handling, and at the same time, stability in challenging offroad applications – 36 spoke design – Anodized spoke nipple made from aluminum – Wheel size 2.15" x 19" – For axle diameters of 25 mm CLOSED COURSE / COMPETITION USE ONLY

790.09.901.044 / 04  CCCUO

790.10.902.044 / 04  CCCUO

FACTORY FRONT WHEEL 1.6" X 21" – Anodized D.I.D DirtStar rim – an ideal compromise between rigidity and flexibility – Anodized from the full milled hub – specially developed and coordinated to the properties of the D.I.D DirtStar rim – Maximum weight savings compared to standard wheels – Maximum gain in handling, and at the same time, stability in challenging offroad applications – 36 spoke design – Anodized spoke nipple made from aluminum – Wheel size 1.6" x 21" – For axle diameters of 22 mm

FACTORY REAR WHEEL 2.15" X 18" – Anodized D.I.D DirtStar rim – an ideal compromise between rigidity and flexibility – Anodized from the full milled hub – specially developed and coordinated to the properties of the D.I.D DirtStar rim – Maximum weight savings compared to standard wheels – Maximum gain in handling, and at the same time, stability in challenging offroad applications – 36 spoke design – Anodized spoke nipple made from aluminum – Wheel size 2.15" x 18" – For axle diameters of 20 mm

CLOSED COURSE / COMPETITION USE ONLY

CLOSED COURSE / COMPETITION USE ONLY

077


WHEELS SPECIAL PARTS

796.09.915.000 / EB  XC-W XCF-W / EXC-F

16 – 20 16 – 20

WHEEL BEARING PROTECTION CAP SET – Optimum protection against dirt, sand and water penetratiing your front wheel bearing – Decreases wear of seal rings and wheel bearings resulting in a longer lifespan

796.10.915.000 / EB  XC-W XCF-W / EXC-F

16 – 20 16 – 20

WHEEL BEARING PROTECTION CAP SET – Optimum protection against dirt, sand and water penetratiing your rear wheel bearing – Decreases wear of seal rings and wheel bearings resulting in a longer lifespan

SXS.03.540.400 

780.09.099.000 

791.09.999.000 

781.09.999.000 

AXLE REDUCTION KIT Together with wheel spindle 503.09.081.200 and nut 503.09.082.100, this kit allows forks with a diameter of 26 mm to be fitted to wheels with an axle diameter of 20 mm.

WHEEL RIM STICKER KIT – For wheel sizes 18/21"; 19/21" – Pre-cut sticker – Suitable for front and rear rims

WHEEL RIM STICKER KIT – For wheel sizes 18/21"; 19/21" – Pre-cut sticker – Suitable for front and rear rims

WHEEL RIM STICKER KIT – For wheel sizes 18/21"; 19/21" – Pre-cut sticker – Suitable for front and rear rims

079


WHEELS SPECIAL PARTS

790.09.981.060 / 04  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

15 – 20 15 – 20 17 – 20 20

FRONT AXLE PULLER Simplifies removal of the front wheel. For all front axles with a diameter of 22 mm.

U695.1087  HUB STICKER KIT – 4 pieces, 37 x 31 mm – 4 pieces, 48 x 40 mm

777.10.976.050 / 04  VALVE CAP SET Orange anodized valve caps with built in valve stem puller.

791.09.998.000 

777.10.976.150 / 04 

HUB STICKER KIT – 4 pieces, 37 x 31 mm – 4 pieces, 48 x 40 mm

VALVE CAP SET Orange anodized valve caps.

081


CHAINS + SPROCKETS SPROCKETS

582.10.951.042  582.10.951.045  582.10.951.048  582.10.951.050  582.10.951.052 

T42 T45 T48 T50 T52

REAR SPROCKET For longer trips, we recommend this extremely low-wear, QStE 460 steel sprocket.

777.10.951.045 / 04 777.10.951.047 / 04 777.10.951.048 / 04 777.10.951.049 / 04 777.10.951.050 / 04 777.10.951.052 / 04

T45 T47 T48 T49 T50 T52

REAR SPROCKET – Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world – Originally developed for the aerospace industry and then adopted by the best rear sprocket manufacturers – Chain runs accuracy of 0.002 mm – Free from vibration – therefore the highest power transmission efficiency – Anodized orange with a permanent, organic and environmentally friendly pigment

083


CHAINS + SPROCKETS SPROCKETS

U695.1068 U695.1069 U690.6815 U695.1070 U690.6816 U695.1071

T44 T48 T49 T50 T51 T52

RENTHAL REAR SPROCKET Made exclusively for KTM by Renthal, these orange anodized rear sprockets are used by the KTM Factory Race teams. Lightweight, durable and provide great performance.

584.10.051.038 / 04 584.10.051.040 / 04 584.10.051.041 / 04 584.10.051.042 / 04 584.10.051.044 / 04 584.10.051.045 / 04 584.10.051.046 / 04 584.10.051.048 / 04 584.10.051.049 / 04 584.10.051.050 / 04 584.10.051.051 / 04 584.10.051.052 / 04

T38 T40 T41 T42 T44 T45 T46 T48 T49 T50 T51 T52

SUPERSPROX STEALTH REAR SPROCKET If you’re looking for the ultimate in quality and performance, this sprocket is the one for you! – High-strength steel teeth, gives a longer service life – Aluminum inner ring, to reduce unsprung weight – Joined together permanently with high-strength rivets – At least three times longer service life than other aluminum rear sprockets – 50% lighter than a conventional steel rear sprocket 2K sprockets are exclusively produced for KTM by Supersprox. This product is protected under the following patents in Europe and USA. EU patent # EP1573234. US Patent # 7.481.729. Patent owner Supersprox, a.s.

085


CHAINS + SPROCKETS CHAINS

503.10.165.118 

520

790.10.965.118 / EB 

520

CHAIN Sometimes less means more! Specially developed for motocross use, the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss.

CHAIN Sometimes less means more! Specially developed for motocross use, the special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss.

780.10.167.118 

796.10.965.118 / EB

520

X-RING CHAIN An X-ring chain has the following differences and advantages compared to an O-ring chain: – The X-ring has 4 contact points in contrast to 2 contact points with the O-ring version – This means enhanced flexibility and better running characteristics for the X-ring chain – The spring effect of the X-ring provides consistent and permanent lubrication – This means a significantly longer service life for the X-ring chain – The X-ring provides a better seal against penetration from water and dirt

520

XW-RING CHAIN – Higher flexibility and better running characteristics – Consistent and permanent lubrication – Better seal against water and dirt – Significantly longer service life

087


CHAINS + SPROCKETS SPECIAL PARTS

781.04.070.100 / 04  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

07 – 20 07 – 20 08 – 20 08 – 20

CHAIN GUIDE

772.04.066.100 / 04  SX / XC SX-F / XC-F

07 – 20 07 – 20

CHAIN SLIDING PROTECTION Offered in an orange factory look.

515.04.066.000 / 04  XC-W XCF-W / EXC-F

12 – 20 12 – 20

CHAIN SLIDING PROTECTION

781.04.970.000 / 04  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

07 – 20 07 – 20 08 – 20 08 – 20

CHAIN GUIDE The T.M. Designworks chain guide, as used by the KTM Factory Team: – CNC-machined from Teflon – Specially designed for the challenges of offroad use Pay attention to clearance when used in combination with a 2K rear sprocket. The chain guide may need to be adapted accordingly. Replacement wear pad available 781.04.970.010

790.03.053.000 / 04  125/150 SX / XC 250/300 SX / XC SX-F / XC-F  XC-W XCF-W / EXC-F

16 – 20 17 – 20 16 – 20 17 – 20 17 – 20

CHAIN SLIDER Offered in an orange factory look.

089


BRAKES BRAKE DISCS

777.09.160.000  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

260 MM

– 20 – 20 – 20 – 20

WAVE BRAKE DISC (FRONT) – Floating brake disc manufactured from special high-grade stainless steel – Internal ring made from special high-grade stainless steel – Minimal brake pad wear

091


BRAKES BRAKE DISCS

789.09.960.000  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

270 MM

09 – 20 09 – 20 10 – 20 10 – 20

FLAME BRAKE DISC (FRONT) – Floating brake disc manufactured from special high-grade stainless steel – Internal ring made from high-grade aluminum – Flame design for added braking performance – Minimal brake pad wear – The brake caliper support 789.13.914.100 is required for installation

789.10.960.000 

583.09.060.000 

320 MM

250.10.960.000 

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F 220 MM

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

– 20 – 20 – 20 – 20

BRAKE DISC (FRONT) – Extra large for extra-high braking power – Manufactured from special high-grade stainless steel – Can only be used in conjunction with standard installed brake caliper, and the brake caliper support 584.13.014.000 or 770.13.914.000 is also required for fitting with the standard 2-piston Brembo® brake caliper

WAVE BRAKE DISC (REAR) – Manufactured from special high-grade stainless steel – Full version for muddy track conditions – Minimum brake pad wear

220 MM

09 – 20 09 – 20 10 – 20 10 – 20

FLAME BRAKE DISC (REAR) – Manufactured from special high-grade stainless steel – Extra thick – i.e. 4.6 mm – Flame design for increased braking performance – Minimum brake pad wear

781.10.960.000  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

220 MM

– 20 – 20 – 20 – 20

FLAME BRAKE DISC (REAR) – Manufactured from special high-grade stainless steel – Flame design for increased braking performance – Minimum brake pad wear

093


BRAKES BRAKE PADS

590.13.930.200 

590.13.930.100 

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

– 20 – 20 – 20 – 20

– 20 – 20 – 20 – 20

FRONT BRAKE PADS – 100% sintered metals – Very high coefficient of friction for maximum and enduring braking power – Low “fading“ tendency when hot – Strongly effective braking in the wet – Very hard and therefore extremely long-lasting – Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)

FRONT BRAKE PADS – Made from a special material mix with a high proportion of organic substances, creating a softer brake pad – With ceramic under layer for optimum thermal insulation – Lower friction coefficient than sintered brake pads, resulting in a less aggressive braking feel – Beneficial when particularly refined responsiveness is desired for ideal brake application

548.13.990.200 

548.13.990.100 

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

04 – 20 04 – 20 04 – 20 04 – 20

REAR BRAKE PADS – 100% sintered metals – Very high coefficient of friction for maximum and enduring braking power – Low “fading” tendency when hot – Strongly effective braking in the wet – Very hard and therefore extremely long-lasting – Particularly beneficial in extreme conditions (e.g. sand, gravel, etc.)

04 – 20 04 – 20 04 – 20 04 – 20

REAR BRAKE PADS – Made from a special material mix with a high proportion of organic substances, creating a softer brake pad – With ceramic under layer for optimum thermal insulation – Lower friction coefficient than sintered brake pads, resulting in a less aggressive braking feel – Beneficial when particularly refined responsiveness is desired for ideal brake application

095


BRAKES

BRAKES

SERVICE

SPECIAL PARTS

503.13.082.200  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

04 – 20 04 – 20 04 – 20 04 – 20

BRAKE PAD RETAINING PIN Lost pins are a thing of the past. With these bolts, changing brake pads is possible even in difficult conditions: quickly and easily!

777.13.975.110 / 30  SX / XC SX-F / XC-F

13 – 20 13 – 20

BRAKE CALIPER SUPPORT Lighter and stiffer than the standard brake caliper support. The stiffness has a positive effect on braking power. CNC-machined from the highest grade of aluminum and anodized black. Options available: Carbon brake caliper protection 777.13.975.120 and carbon brake disc protection 777.13.975.030.

548.12.063.044  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

780.13.920.000  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

FRONT

09 – 20 09 – 20 11 – 20 11 – 20

BRAKE BLEEDER SCREW Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own! First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap. Suitable for the front brake caliper.

770.13.920.100  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

REAR

REAR BRAKE SAFETY WIRE Prevents twigs from being caught in between the engine and the foot brake lever, and the foot brake lever being bent or blocked by this.

– 20 – 20 – 20 – 20

BANJO BOLT WITH BLEEDER FUNCTION Same as the brake bleeder screw 780.13.920.000, but for the rear brake caliper.

770.13.914.000 

789.13.914.100 

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

09 – 20 09 – 20 10 – 20 10 – 20

BRAKE CALIPER SUPPORT Required when using the 320 mm brake disc 583.09.060.000 and 2-piston Brembo® brake caliper.

09 – 20 09 – 20 09 – 20 09 – 20

BRAKE CALIPER SUPPORT Required for using the 270 mm brake disc 789.09.960.000 and 2-piston Brembo® brake caliper.

097


COOLING

COOLING

RADIATOR

FANS

791.35.910.044  250/350 SX-F / XC-F 19 – 20

557.35.941.044 

795.35.910.044  450 SX-F / XC-F

SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20

19 – 20

FACTORY RADIATOR KIT The special KTM factory radiators have a larger surface area for more efficient cooling. They also contain special coolant hoses and radiator protectors to improve engine cooling.

RADIATOR FAN Indispensable in extreme conditions, this fan provides more air, better cooling and maximum performance. It’s in your own hands: The digital control allows you to adjust the switch-on temperature to the present conditions and to read off the current temperature at any time. The switch-on temperature can be set anywhere between 65°C and 95°C. The switch-off temperature is set automatically, and is always 1°C below the switch-on temperature. For installation on all models, you will need the auxiliary wiring harness 777.11.979.000; for additional switching, the supplementary wiring harness 777.11.979.044 can also be installed.

796.35.965.044  XC-W XCF-W / EXC-F

17 – 20 17 – 20

RESERVOIR – Radiator reservoir for overheated radiators – Built into the frame breast pipe

797.35.941.044  XC-W 20 XCF-W / EXC-F 20 RADIATOR FAN For use even (or especially) in extreme conditions – for more air, better cooling and maximum performance. Incredibly easy plug-and-play installation.

099


COOLING PROTECTION

791.35.034.000 / EB 791.35.034.000 / 28 SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20 RADIATOR PROTECTION Suitable for the left and right side.

796.35.936.044  125/150 SX 250 SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

16 – 20 17 – 20 16 – 20 17 – 20 17 – 20

RADIATOR PROTECTION – Made of plastic – Provides the highest level of protection, at the lowest weight – Includes specially fitted radiator protection grills

794.35.935.000  125/150 SX 250 SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

16 – 20 17 – 20 16 – 20 17 – 20 17 – 20

RADIATOR PROTECTION SLEEVE The radiator protection sleeve helps prevent the radiator guard from becoming clogged with dirt, mud or sand. This avoids rapid overheating of the engine.

790.35.994.000 / EB 790.35.994.000 / C1 250/350 SX-F / XC-F 16 – 20 250/350 EXC-F 17 – 20 350 XCF-W 20

548.35.980.000 

WATER PUMP COVER PROTECTION This plastic protector helps prevent damage to the water-pump cover and radiator hose in the area of the hose connection.

FOAM For extremely muddy conditions. Helps prevent the radiator from becoming clogged with mud.

101


PROTECTION ENGINE PROTECTION 2-STROKE

504.03.990.000  125/150 SX 150 XC-W

16 – 20 17 – 20

555.03.990.000  250 SX 250/300 XC 250/300 XC-W

19 – 20 19 – 20 20

SKID PLATE This generation of aluminum skid plate offers the most effective protection for both frame and engine: – Spaced from the frame with rubber padding – Extremely robust rear fastening clamp – Made of 4 mm-thick, high-strength, robust aluminum – Extremely durable and endurance-tested for the toughest offroad use – Custom design - specially developed for KTM models – Highest grade of quality workmanship – Simple and quick installation

504.32.975.044  125/150 SX 150 XC-W

504.03.090.144  150 XC-W

17 – 20

16 – 20 17 – 20

554.32.975.044 

554.37.994.044 

250 SX 250/300 XC 250/300 XC-W

250 SX 250/300 XC 250/300 XC-W

19 – 20 19 – 20 20

CLUTCH SLAVE CYLINDER PROTECTION – Prevents damage to the engine case in the event of the chain breaking – Helps prevent dirt and mud from packing in between the chain and engine case – CNC-machined from high-strength aluminum – Best effective protection for the clutch slave cylinder

19 – 20 19 – 20 20

EXHAUST FLANGE GUARD For extreme riding and racing! This exhaust flange guard is designed to provide added strength to the cylinder flange in the event of an unexpected impact to the pipe.

554.03.090.144  250/300 XC-W

504.03.990.544  125/150 SX 150 XC-W

16 – 20 17 – 20

555.03.990.544  250 SX 250/300 XC 250/300 XC-W

19 – 20 19 – 20 20

SKID PLATE This generation of aluminum skid plate offers the most effective protection for both frame and engine: – Spaced from the frame with rubber padding – Extremely robust rear fastening clamp – Made of 4 mm-thick, high-strength, robust aluminum – Extremely durable and endurance-tested for the toughest offroad use – Custom design - specially developed for KTM models – Highest grade of quality workmanship – Simple and quick installation

17 – 20

SKID PLATE Composite skid plates combine a number of special features: – Manufactured with ultra-modern two-component injection molding technology – Made from special high-strength composites – Rubber inserts around the contact surfaces between skid plate and frame for improved protection – Incredibly easy installation – screws directly onto the frame without brackets – Developed for use on the most rugged offroad terrain – Maximum protection with the lightest weight possible – Custom design

590.03.990.250  FOAM When positioned between engine and skid plate, less dirt can accumulate, hence allowing better cooling of the engine.

103


PROTECTION ENGINE PROTECTION 4-STROKE

791.03.990.044  250/350 SX-F / XC-F 19 – 20

795.03.990.044  450 SX-F / XC-F 19 – 20 SKID PLATE This generation of skid plate provides the most effective protection for both frame and engine: – Made from 3 mm-thick, high-strength and robust C-SMC (Carbon-Sheet Molding Compound) material – Extremely lightweight due to the material used – Spaced from the frame by rubber padding – Direct assembly onto the frame – Extremely durable and endurance tested for the toughest offroad use – Highest quality of machining – Quick and easy assembly

105


PROTECTION ENGINE PROTECTION 4-STROKE

791.03.990.544  250/350 EXC-F 350 XCF-W

17 – 20 20

795.03.990.544  450/500 EXC-F 500 XCF-W

17 – 20 20

SKID PLATE This generation of skid plate provides the most effective protection for both frame and engine: – Made from 3 mm-thick, high-strength and robust C-SMC (Carbon-Sheet Molding Compound) material – Extremely lightweight due to the material used – Spaced from the frame by rubber padding – Extremely durable and endurance tested for the toughest offroad use – Highest quality of machining – Quick and easy installation

590.03.990.250  790.03.990.544 

790.03.990.000 

250/350 SX-F / XC-F 16 – 18 250/350 EXC-F 17 – 20 350 XCF-W 20

250/350 SX-F / XC-F 16 – 18 250/350 EXC-F 17 – 20 350 XCF-W 20

794.03.990.544 

794.03.990.000 

450 SX-F / XC-F 450/500 EXC-F 500 XCF-W

450 SX-F / XC-F 450/500 EXC-F 500 XCF-W

16 – 18 17 – 20 20

SKID PLATE This generation of KTM aluminum skid plates offers the most effective protection for both frame and engine: – Spaced from the frame with rubber padding – Extremely robust rear fastening clamp – Made of 4 mm-thick, high-strength, robust aluminum – Side parts welded from the inside and outside – Extremely durable and endurance tested for the toughest offroad use – Custom design - specially developed for KTM models – Highest grade of quality workmanship – Simple and quick installation

16 – 18 17 – 20 20

SKID PLATE This generation of KTM aluminum skid plates offers the most effective protection for both frame and engine: – Spaced from the frame with rubber padding – Extremely robust rear fastening clamp – Made of 4 mm-thick, high-strength, robust aluminum – Side parts welded from the inside and outside – Extremely durable and endurance tested for the toughest offroad use – Custom design - specially developed for KTM models – Highest grade of quality workmanship – Simple and quick installation

FOAM When positioned between engine and skid plate, less dirt can accumulate, allowing for better cooling of the engine.

792.03.090.044  250/350 EXC-F 350 XCF-W

17 – 20 20

796.03.090.044  450/500 EXC-F 500 XCF-W

17 – 20 20

SKID PLATE Composite skid plates combine a number of special features: – Manufactured with ultra-modern two-component injection molding technology – Made from special high-strength composites – Rubber inserts around the contact surfaces between the skid plate and frame for improved protection – Incredibly easy installation by mounting directly onto the frame with no brackets – Developed for use on the most rugged offroad terrain – Maximum protection with the lightest weight possible

107


PROTECTION ENGINE PROTECTION 4-STROKE

790.32.975.044  250/350 SX-F / XC-F 16 – 20 250/350 EXC-F 17 – 20 350 XCF-W  20

794.32.975.044  450 SX-F / XC-F 450/500 EXC-F 500 XCF-W

16 – 20 17 – 20 20

CLUTCH SLAVE CYLINDER PROTECTION – Prevents damage to the engine case in the event of the chain breaking – Helps prevent dirt and mud from packing in between the chain and engine case – CNC-machined from high-strength aluminum – Best effective protection for the clutch slave cylinder

792.30.994.000 / EB  250/350 SX-F / XC-F 16 – 20 250/350 EXC-F 17 – 20 350 XCF-W  20 CLUTCH COVER PROTECTION – Made from plastic – Optimum protection against roost – Helps protect against the cover being dented by the brake lever in the event of a minor fall – Fitted for the original outer clutch cover

794.30.994.000 / EB 794.30.994.000 / 30 450 SX-F / XC-F

16 – 20

CLUTCH COVER PROTECTION – Made from plastic – Optimum protection against roost – Helps protect against the cover being dented by the brake lever in the event of a minor fall – Fitted for the original outer clutch cover

109


PROTECTION CHASSIS

520.00.092  520.00.093 

796.01.994.000  SX / XC SX-F / XC-F XC-W XCW-F / EXC-F

ALL USD FORKS Ø 48 MM PROTECTIVE FORK STICKER SET Extra thick film helps protect the outer fork tubes against roost. For all 48 mm forks.

15 – 20 15 – 20 16 – 20 16 – 20

FORK SHOE PROTECTION KIT Helps protect fork shoes from damage. Made from plastic.

791.04.983.000  SX / XC 16 – 20 SX-F / XC-F 16 – 20 SHOCK ABSORBER LINKAGE PROTECTION – Helps protect the linkage from damage – Simple and quick installation

595.04.090.050  XC-W XCF-W / EXC-F

– 20 – 20

780.01.095.000 

595.01.095.000 

ALL USD FORKS Ø 48 MM

ALL USD FORKS Ø 48 MM

FORK PROTECTOR – Made from neoprene – Ideal protection for the fork – Designed to be used with the closed fork protector – For fork tubes with a diameter of 48 mm

FORK PROTECTOR – Made from neoprene – Ideal protection for the fork – Designed to be used with the closed fork protector – For fork tubes with a diameter of 48 mm

PDS PROTECTION – Made from neoprene – Helps protect the lower PDS bearing against ingress of dirt – Extends the service life of the lower PDS bearing

111


PROTECTION CHASSIS

777.09.945.000  SX / XC SX-F / XC-F XC-W XCW-F / EXC-F

781.04.974.100  790.01.994.000 / 49 

SX / XC SX-F / XC-F XC-W XCW-F / EXC-F

FORK PROTECTOR KIT – Made of carbon fiber – Optimum protection against roost – Made to fit all 48 mm forks

CHAINGUIDE BRACKET PROTECTION Manufactured from high-strength aluminum. Helps protect the chain guide bracket from major damage. Cannot be used in combination with the T.M. Designworks chain guide.

15 – 20 15 – 20 16 – 20 16 – 20

FRONT SLIDE PADS Helps protect the fork from damage in the event of a slide.

07 – 20 07 – 20 08 – 20 08 – 20

791.03.094.000 / EB 791.03.094.000 / 30 SX / XC 19 – 20 SX-F / XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20 FRAME PROTECTION SET Helps prevent damage to the powder coating by dirt, falls or the rider’s boots.

781.10.945.100  SX / XC SX-F / XC-F XC-W XCW-F / EXC-F

12 – 20 12 – 20 – 20 – 20

REAR SLIDE PADS Helps protect the swingarm in the event of a slide.

781.04.994.100 / 30  XC-W XCW-F / EXC-F

12 – 20 12 – 20

SWINGARM PROTECTION Made from plastic, the swingarm protector helps protect the swingarm from damage. The benefit: An undamaged and visually appealing swingarm, resulting in a positive effect on the resale value of your motorcycle.

772.04.994.100 / 30  SX (2-STROKE) SX (4-STROKE)

12 – 20 11 – 20

SWINGARM PROTECTION Made from plastic, the swingarm protector helps protect the swingarm from damage. The benefit: An undamaged and visually appealing swingarm, resulting in a positive effect on the resale value of your motorcycle. When fitting to125/150 SX 16-18 and SX-F/XC-F 16-18 models, brake line guide 765.04.042.000 is also required.

794.03.994.100 / EB 794.03.994.100 / 30 794.03.994.100 125/150 SX / XC 250/300 SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

16 – 20 17 – 20 16 – 20 17 – 20 17 – 20

FRAME PROTECTION STICKER SET For protecting the frame without altering the slim lines of your bike.

113


PROTECTION CHASSIS

796.13.975.044  XC-W XCF-W / EXC-F

777.13.975.120 

04 – 20 04 – 20

789.13.975.144 

BRAKE CALIPER PROTECTION – Manufactured from carbon fiber – Optimum protection against roost – Can be installed on brake caliper supports 777.13.975.010.30, 777.13.975.110.30, 781.13.975.044, 781.13.975.144, 781.13.975.244, 789.13.975.044 or 789.13.975.144

SX / XC SX-F / XC-F

790.09.961.100 / 30  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

< 260 MM BRAKE DISC

13 – 20 13 – 20

BRAKE CALIPER SUPPORT WITH BRAKE DISC GUARD The integrated brake disc guard helps protect the rear brake disc. The brake caliper support is lighter and stiffer than the standard version. The stiffness has a positive effect on such braking properties as braking power and application. CNC-machined rom the highest grade of aluminum and anodized in black and orange. Option available: Carbon composite brake caliper guard 777.13.975.120.

15 – 20 15 – 20 16 – 20 16 – 20

FRONT BRAKE DISC GUARD Very practical: The intelligent fitting system with a central adapter replaces the spacer sleeve on the wheel axle and allows the tire to be changed, brake to be serviced, etc., without removing the brake cover.

790.03.944.044  125/150 SX 250 SX / XC SX-F / XC-F

FOOTPEG SLIDERS Fiberglass reinforced plastic. Helps protect the footpegs from damage in the event of a slide. Can be fitted to all motorcycles with footpegs 790.03.041.000 (right) and 790.03.040.000 (left).

777.13.975.030  BRAKE DISC GUARD Helps protect the rear brake disc from roost and other solid objects, while maintaining minimal weight. Can be fitted on the CNC brake caliper support 777.13.975.010 / 30 or 777.13.975.110 / 30.

16 – 20 17 – 20 16 – 20

548.10.961.200 / 30  548.10.961.200 / 04  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

04 – 20 04 – 20 04 – 20 04 – 20

REAR BRAKE DISC GUARD Helps protect the rear brake disc from roost and other solid objects. Manufactured from high-strength aluminum.

781.08.999.020  125/150 SX / XC 250/300 SX / XC SX-F / XC-F

16 – 20 17 – 20 16 – 20

TRIPLE CLAMP PROTECTIVE STICKER KIT Extra thick film helps protect the triple clamp from roost. For use with factory triple clamps SXS.13.450.460 and SXS.13.450.470, as well as triple clamp 781.01.999.020.04 and 781.01.999.022.04.

115


AIR FILTER

790.06.920.000  125/150 SX / XC 250 SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

16 – 20 17 – 20 16 – 20 17 – 20 17 – 20

DUST COVER FOR AIR FILTER This large-pored air filter cover acts as an additional protective layer, hence extending the time between filter service intervals. Recommended in extremely dusty conditions.

790.06.921.000  125/150 SX / XC 250 SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

16 – 20 17 – 20 16 – 20 17 – 20 17 – 20

RAIN COVER FOR AIR FILTER Recommended in extremely wet conditions.

790.06.922.000  125/150 SX / XC 250 SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

16 – 20 17 – 20 16 – 20 17 – 20 17 – 20

SAND COVER FOR AIR FILTER Recommended for use in sandy conditions. Suggested installation together with oiled air filter and dry dust guard 590.06.019.000, 772.06.920.100, 790.06.920.000 or 472.06.920.000.

117


NAVIGATION + LUGGAGE

781.12.978.100  XC-W XCF-W / EXC-F

5 L

04 – 20 04 – 20

LUGGAGE BAG The robust, waterproof bag can be fitted easily and without additional installation materials. The volume of the bag is approx. 5 liters (for use on FREERIDE models, rear rack 720.12.927.044 is also required).

601.12.092.070  HANDLEBAR CROSS BRACE Universally applicable option for mounting the GPS bracket.

617.12.990.000  617.12.990.100  617.12.990.200  617.12.990.300  617.12.990.400  617.12.991.200  617.12.991.300 

iPHONE 6 / 7 / 8 PLUS iPHONE 6 / 7 / 8 iPHONE X / XS GALAXY S8 / S9 GALAXY S9+ iPHONE XS MAX iPHONE XR

SMARTPHONE CASE – Helps protect your expensive smartphone, while still keeping a slim design – Integrated counterpart for the smartphone bracket (sold seperatly) – The smartphone can be easily mounted onto the motorcycle by turning it 90°

930.02.903.100  XC XC-F XC-W XCF-W / EXC-F

– 20 – 20 – 20 – 20

GPS BRACKET Only for use on the original handlebar mount.

765.12.924.000 

4 L

INNER BAG Keep your belongings dry with this handy, water-resistant bag that can be placed inside your motorcycle luggage and cases. – Waterproof resistant coating – Waterproof roll closure

620.02.903.150  GPS BAG Helps keep documents, maps, navigation and communication equipment (e.g., cellphone) dry and protected against vibration in your field of vision. – Suitable for all KTM GPS holders – Size: 170 x 130 x 35 mm Bracket 620.02.903.100 is required for mounting.

760.12.992.244  XCF-W / EXC-F

17 – 20

GPS BRACKET Easy to mount on any original KTM handlebar clamp using cushioned sockets. Provides the option of attaching a plug and locking the GPS and holder so that they’re theft-proof. Suitable for Garmin / TomTom GPS devices and KTM GPS / PDA bag.

617.12.991.100  SMARTPHONE BRACKET – Universal and discreet mounting solution for your smartphone – Complementary part for the smartphone case – The smartphone can be easily mounted onto the motorcycle by turning it 90° – Can be clamped onto the handlebar (different adaptors included) – The arm can be rotated in any position for the perfect positioning of your smartphone

119


NAVIGATION + LUGGAGE

797.12.919.000  XC 19 – 20 XC-F 19 – 20 XC-W 20 XCF-W / EXC-F 20 SIDE BAGS SET – Robust and waterproof bag set – Waterproof roll closure – Welded seams – Ideal combination of quality and all-round usability – Special seat with straps included – Mounting material included

121


FREERIDE

790.02.924.100 

CLOSED END

LOCK-ON GRIP SET – Grip replacement made easy – Right grip permanently glued onto the throttle grip – Left grip with aluminum clamping ring for fastening onto the handlebar – Laborious process of gluing and securing grips with safety wire is no longer necessary

630.02.021.100  630.02.021.200 

548.02.021.000  548.02.021.100 

SOFT MEDIUM

GRIP SET The special half-waffle grip has been developed to meet the demands and preferences of our factory riders, with the clear objectives: comfort AND optimal grip – because no calluses on the palms and secure grip mean less stress when riding. The benefits: – Ergonomic; contour matched to the shape of the hand for maximum comfort – Small “half waffle” ribs on the rear for a secure grip – Made from two materials with different grades of hardness – Available in two versions (soft and medium) – Three areas for the metal safety wire

790.02.923.000  790.02.121.100  790.02.923.100 

CLOSED END OPEN END

781.02.922.000 

GRIP SET The KTM 2K (2K = 2 different materials) grip combines the durability of KTM standard grips and the comfort of the soft KTM grips. – Harder orange material on the inside and at the grip ends for a long service life – Softer black material on the outside, where the hand lies on the grip, for increased comfort – Open grip end option available for closed handguards or bar ends

MUD GRIPS The mud grips are simply pulled over existing grips and provide a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix.

U695.1716 

790.02.013.100 

GRIP DONUT SET Optimum protection against thumb blisters with these coated neoprene rings. Simply slide onto the grips.

THROTTLE TUBE This gives you the option of using traditional grips on models that come standard with lock-on grips.

OPEN END OPEN END OPEN END

LOCK-ON GRIP SET – Grip replacement made easy – Right grip permanently glued onto the throttle grip – Left grip with aluminum clamping ring for fastening onto the handlebar – Laborious process of gluing and securing grips with safety wire is no longer necessary – Open grip ends for mounting closed handguards

123


FREERIDE

603.02.179.100 / 30 603.02.179.000 / EB 603.02.179.100 / AB 780.02.079.200 / 30 780.02.079.100 / EB 780.02.079.200 / AB FREERIDE

HIGH VERSION HIGH VERSION HIGH VERSION LOW VERSION LOW VERSION LOW VERSION

– 20

WRAP-AROUND HANDGUARD KIT The closed, two-component plastic handguards developed by KTM feature a black center section that offers maximum strength for optimum protection. The colorful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights. Cannot be used with Twinwall handlebars.

720.02.931.244 / 04 

720.13.902.244 / 04 

FREERIDE  – 20

FREERIDE  – 20

FLEX CLUTCH LEVER Minimize the possibility of a broken lever with these levers that are designed to fold away upon contact with the ground.

FLEX BRAKE LEVER Minimize the possibility of a broken lever with these levers that are designed to fold away upon contact with the ground.

787.12.916.000 

777.02.944.000 

796.02.979.044 

791.02.979.000 / EB 791.02.979.000 / AB 791.02.979.000 / 30

FREERIDE  – 20

FREERIDE  – 20

FREERIDE

FREERIDE

SUPPORTING STRAP – High-strength nylon strap – Indispensable for use on extreme terrain – Attaches to fork tubes

CLAMP – Includes plastic insert – The brake or clutch control rotates in the case of a minor fall – Reduces the risk of a lever being broken – Suitable for all Brembo® brake and clutch systems

WRAP-AROUND HANDGUARD KIT – Made of sturdy plastic – Converts the originally open handguards into a closed version – Also compatible with handguards 796.02.979.000 / EB / AB / 30 and 721.02.979.000 / EB / AB / 30

– 20

– 20

WRAP-AROUND HANDGUARD KIT – Made of sturdy plastic – Handguards 796.02.182.044 included in kit – Mounting independent of the lever mounting, mounts directly to the handlebar

125


FREERIDE

721.02.979.000 / EB 721.02.979.000 / 28 721.02.979.000 / 30

772.12.905.444 

FREERIDE

FREERIDE

– 20

– 20

HANDGUARD – Open version – Manufactured with two-component injection molding technology – Black mid-section = maximum strength for optimum protection – Colored top and bottom parts = highly flexible, enduring even the roughest of treatment – Attaches directly at the levers with a special mount

BRACKET FOR FACTORY STEERING DAMPER

770.12.005.000 

770.12.005.144 

FREERIDE

FREERIDE

– 20

FACTORY STEERING DAMPER Increased stability at the front forks under high speeds. This extremely light and fully adjustable KTM steering damper offers top performance for the price. The sophisticated damper mounting allows for individual steering adjustment even after installation. Low design profile. Handlebar support kit 000.50.000.929 required for use on MY16 and XC models from MY16.

CLAMP FOR FACTORY STEERING DAMPER

797.02.979.000 / 30 797.02.979.000 / EB 797.02.979.000 / AB FREERIDE

585.12.050.100  FREERIDE

– 20

STEERING DAMPER Have you ever had the handlebars ripped out of your hands? This high-end steering damper helps provide maximum control on fast tracks and offers a significant increase in stability! Further advantages: – Extremely lightweight – Sensitive feedback behavior – High speed settings – Optimum 25 click setting range Proven success with the KTM Factory Rally Team.

– 20

– 20

HANDGUARD KIT This handguard set has been specially developed for your motorcycle and is an essential accessory for heavy-duty offroad and Supermoto sessions. The broad, generous proportions, combined with the robust aluminum external frame helps provide excellent mobility together with maximum protection in the event against impact, roost, branches, etc.

770.12.005.644  FREERIDE

– 20

PHDS CLAMP FOR FACTORY STEERING DAMPER This clamp is required for fitting the progressive handlebar damping system (PHDS) SXS.07.125.200 in conjunction with factory steering damper 770.12.005.000 or steering damper 585.12.050.100, whereby the latter is only permissible if steering damper bracket 585.12.050.144 or 585.12.050.544 is used.

127


FREERIDE

585.12.050.144  FREERIDE

– 20

STEERING DAMPER BRACKET

789.01.939.044  789.01.939.144  789.01.939.244  789.01.939.344  789.01.939.444  FREERIDE

SXS.07.125.200  FREERIDE

– 20

32 MM 37 MM 42 MM 47 MM 52 MM

– 20

HANDLEBAR MOUNT KIT Available in five different heights. Kit includes 2x handlebar support lower parts and 2x fastening bolts. Please note, upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.

PROGRESSIVE HANDLEBAR DAMPING SYSTEM (PHDS) The CNC-machined handlebar mounting with cushioning rubber inserts relieves wrist and shoulder joints. Further benefits of the PHDS: – Helps cushion and absorb heavy hits – Absorbs chassis and engine vibrations – Additional handlebar damping on the horizontal axis – Optimum steering precision – Handlebar height adjustable to 2 positions – Further damping elements available in three degrees of hardness (soft, medium, hard) for individual customization

FREERIDE

– 20

HANDLEBAR PAD Provides optimum protection. Already a must at many events.

– 20

MIRROR Left-hand version, light and robust. CLOSED COURSE / COMPETITION USE ONLY

FREERIDE

– 20

RENTHAL TWINWALL HANDLEBAR The Twinwall 996, in a KTM orange design, combines two handlebars into one: An exterior provides maximum strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to help protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls, resulting in weight savings and a a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes prevent the ingress of water, dirt, cleaning agents and other contaminants. Comes with a handlebar bar pad.

548.02.005.000  FREERIDE

FREERIDE

HANDLEBAR ENDS Helps protect rubber grips from grazing in the event of a fall.

502.12.040.000 / 30  CCCUO

FREERIDE

795.02.901.000 / 04 

777.01.939.010  10 MM 777.01.939.020  20 MM 777.01.939.030  30 MM

– 20

772.02.002.144 

– 20

HANDLEBAR RISER These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.

129


FREERIDE

700.08.113.100 / 28

700.07.025.051 / 28

FREERIDE E-XC

FREERIDE E-XC

18 – 20

18 – 20

FREERIDE E-XC

18 – 20

BATTERY COVER LEFT

BATTERY COVER RIGHT

REAR FENDER

700.07.025.050 / 28

721.08.190.000  FREERIDE E-XC

18 – 20

RACE LINE GRAPHICS KIT

700.08.054.000 / 28  700.08.054.000 / 30 

472.01.094.000 / 28

FREERIDE E-XC

FREERIDE E-XC

SHROUD SET

18 – 20

FORK PROTECTOR KIT

18 – 20

700.07.940.000 

700.07.040.000 

FREERIDE E

FREERIDE E

– 20

SOFT SEAT Particularly elastic foam for extra comfort. Standard height.

721.08.001.000 / 28 721.08.001.000 / EB

472.08.010.000 / 28 472.08.010.000 / EB

FREERIDE E-XC

FREERIDE E-XC

HEADLIGHT MASK

18 – 20

– 20

LOW SEAT Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 7 mm lower than the standard seat.

18 – 20

FRONT FENDER

131


FREERIDE

721.12.955.044  FREERIDE E-XC

780.03.940.244  FREERIDE

– 20

PIVOT PEGZ Ingenious: Footpegs that move with you when you shift your weight. Developed and tested by KTM professional riders. Ideal for all types of riding and racing. The benefits: – Spring-mounted, 20-degree rotational movement possible towards front and rear – More control and grip in the corners thanks to the maneuverability – Larger tread surface of 60 mm – Simpler and quicker weight shifting – Changing gears and braking made easier – Permanent contact between boot and footpeg Replacement parts available: Spring kit 780.03.940.020 and overhaul kit 780.03.940.030

– 25 MM

18 – 20

LOWERING KIT The low suspension kits specially developed by KTM in collaboration with WP Suspension are the perfect compromise between maximum chassis performance and minimum possible seat height. Just like the standard parts, the components used here are manufactured from the highest quality of materials and have been specially tuned for offroad use in intensive endurance tests. To ensure the best possible function of the suspension kits, we only recommend use with a rider weight of up to 155 lbs.

780.09.099.000 

781.09.999.000 

WHEEL RIM STICKER KIT – For wheel sizes 18/21"; 19/21" – Pre-cut sticker – Suitable for front and rear rims

WHEEL RIM STICKER KIT – For wheel sizes 18/21"; 19/21" – Pre-cut sticker – Suitable for front and rear rims

777.10.976.050 / 04  VALVE CAP SET Orange anodized valve caps with built in valve stem puller.

777.10.976.150 / 04  VALVE CAP SET Orange anodized valve caps.

U695.1087  HUB STICKER KIT – 4 pieces, 37 x 31 mm – 4 pieces, 48 x 40 mm

791.01.900.000  FREERIDE

– 20

BLEEDER VALVE Bleeder valve designed especially for WP forks. A quick press of the finger and the fork is bled.

133


FREERIDE

472.09.960.000  260 MM 

725.13.975.000 / 30 

FREERIDE E

FREERIDE

12 – 20

– 20

WAVE BRAKE DISC (FRONT) – Floating brake disc manufactured from special high-grade stainless steel – With wave design for added braking performance – Minimal brake pad wear – Front brake caliper mounting kit 720.09.960.044 is also required for mounting

BRAKE CALIPER SUPPORT Lighter and stiffer than the standard brake caliper support. The stiffness has a positive effect on such braking properties as braking power. CNC-machined from the highest grade of aluminum and anodized black. Option available: Carbon brake disc guard 777.13.975.030.

700.10.160.000 

777.13.975.030 

472.09.961.000  FRONT

FREERIDE

FREERIDE E

FREERIDE E

230 MM

12 – 20

WAVE BRAKE DISC (REAR) – Manufactured from special high-grade stainless steel – With wave design for added braking performance – Minimal brake pad wear – Rear brake caliper mounting kit 720.10.960.044 is also required for mounting

– 20

BRAKE DISC GUARD Helps protect the rear brake disc from roost and other solid objects while maintaining minimal weight. Designed to fit CNC brake calliper support 777.13.975.010/30 or 777.13.975.110/30.

18 – 20

BRAKE DISC GUARD Very practical: The intelligent fitting system with central adapter replaces the spacer sleeve on the wheel axle and allows the tire to be changed, brake to be serviced, etc., without removing the brake cover.

135


FREERIDE

720.10.951.046 / 04  720.10.951.048 / 04  FREERIDE

T46 T48

– 20

REAR SPROCKET This rear sprocket not only looks cool, it also provides the following benefits: – Manufactured from high-strength 7075-T6 aluminum, the strongest aluminium in the world – Chain runs to an accuracy of 0.002 mm – No small stones or dirt particles can become stuck under the chain thanks to angled recesses between the teeth – All these properties mean lower wear and extreme durability – Anodized orange with a permanent, organic and environmentally friendly pigment

780.10.167.118  FREERIDE

520

– 20

X-RING CHAIN An X-ring chain has the following differences and advantages compared to an O-ring chain: – The X-ring has 4 contact points in contrast to 2 contact points with the O-ring version – This means enhanced flexibility and better running characteristics for the X-ring chain – The spring effect of the X-ring provides consistent and permanent lubrication – This means a significantly longer service life for the X-ring chain – The X-ring provides a better seal against penetration from water and dirt

781.04.070.100 / 04  FREERIDE

– 20

CHAIN GUIDE

137


FREERIDE

595.01.095.100  FREERIDE

– 20

FORK PROTECTOR – Made from neoprene – Ideal protection for the fork – Designed to be used with the open fork protector – For fork tubes with a diameter of 48 mm

720.03.994.000  FREERIDE

– 20

FRAME PROTECTION STICKER SET For protecting the frame without altering the slim lines of your bike.

620.02.903.150  FREERIDE

– 20

GPS BAG Helps keep documents, maps, navigation and communication equipment (e.g., cellphone) dry and protected against vibration in your field of vision. – Suitable for all KTM GPS holders – Size: 170 x 130 x 35 mm Bracket 620.02.903.100 is required for mounting

139


FREERIDE

781.12.978.100  FREERIDE

5L 

– 20

LUGGAGE BAG The robust, waterproof bag can be fitted easily and without additional installation materials. The volume of the bag is approx. 5 liters (for use on FREERIDE models, rear rack 720.12.927.044 is also required).

930.02.903.100  FREERIDE

– 20

GPS BRACKET Only for use on the original handlebar mount.

141


50/65/85 SX

463.04.070.000/EB1  SX-E 5  20 CHAIN GUIDE

454.12.955.044S  SX-E 5

20

LOWERING KIT The low suspension kit is specially developed by KTM, in collaboration with WP to be the perfect compromise between maximum chassis performance and lowest possible seat height. Just like the original parts, the components used here are manufactured from the highest quality materials and have been specially tuned for off-road use in intensive endurance tests. THIS LOWERING KIT IS A REQUIRED PART TO MAKE THE SX-E 5 ELIGIBLE FOR COMPETITION IN THE AMA MINI-E (4-6) JR. CLASS.

143


50/65/85 SX

476.49.905.044  85 SX

18 – 20

105 FACTORY KIT Big bore kit with extra displacement (105 instead of 85). For plenty of torque and even more peak power.

463.01.996.000  65 SX

02 – 20

472.01.996.000  85 SX

03 – 20

FACTORY START The factory start is mounted directly onto the fork. Before the start, the fork is compressed and secured into the desired position to shift the center of gravity forward. This helps prevent the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the holeshot. The first time the fork dips, it releases automatically and you’re READY TO RACE!

461.31.917.000  65 SX

04 – 20

IDLE AIR ADJUSTMENT SCREW The larger outer diameter of the screw head counteracts the effect of soiling in the adjustment screw channel. Furthermore, the screw is longer and easier to access for setting the idle mixture on the carburetor.

452.12.948.344  50 SX

460.01.999.022 / 04  65 SX

471.01.999.114 / 04  85 SX

22 MM OFFSET

12 – 20

14 – 20

POWER REDUCTION KIT With this, racers of the future can ride their first laps with confidence. Reduces the power by approx. 70%.

452.12.948.244  50 SX MINI

14 – 20

POWER REDUCTION KIT With this, racers of the future can ride their first laps with confidence. Reduces the power by approx. 70 %.

14 MM OFFSET

03 – 20

FACTORY TRIPLE CLAMP - Manufactured from the highest grade of aluminum - Optimally tuned steering stem stiffness - 100% alignment to the fork tubes - Perfect flexibility – adapted precisely to the KTM WP Suspension forks - Includes steering stem with steering head bearing already pressed on

145


50/65/85 SX

472.05.979.000  CCCUO

472.05.907.000  CCCUO

85 SX

85 SX

18 – 20

18 – 20

AKRAPOVIČ “SLIP-ON LINE” – More power and torque – Manufactured from high-grade titanium – Carbon fiber silencer end cap – Permanently welded attachment points – Akrapovič logo sticker on silencer – Specially developed for use in motocross

FMF FATTY EXPANSION CHAMBER – Made from high quality, extra strong and durable steel – Nickel-plated, stainless, polished surface – More traction and better control when accelerating – Complete with O-rings – Recommended in combination with an FMF silencer for a perfectly tuned and performance optimized system

CLOSED COURSE / COMPETITION USE ONLY

CLOSED COURSE / COMPETITION USE ONLY

SXS.09.050.500  CCCUO

463.05.907.100  CCCUO

50 SX

65 SX

09 – 20

16 – 20

FMF FATTY EXPANSION CHAMBER – Made from high quality, extra strong and durable steel – Nickel-plated, stainless, polished surface – Complete with O-rings – Recommended in combination with an FMF silencer for a perfectly tuned and performance optimized system

FACTORY EXPANSION CHAMBER – Made from robust steel – Nickel-plated, stainless, polished surface – Minimum weight and maximum performance – Recommended in combination with a factory silencer for a perfectly matched full system with optimum performance

CLOSED COURSE / COMPETITION USE ONLY

CLOSED COURSE / COMPETITION USE ONLY

147


50/65/85 SX

453.05.979.000  CCCUO 50 SX

16 – 20

FMF POWERCORE 2 SILENCER – Outer sleeve manufactured from high-grade aluminum – Lightweight – Simple fitting – Easy to install – Specially developed for use in motocross – Recommended in combination with an FMF factory expansion chamber for a perfectly tuned and performance optimized system

463.05.979.000  CCCUO 65 SX

16 – 20

FACTORY SILENCER – Made from high-grade aluminum – Lightweight – Simple fitting, easy to install – Recommended in combination with a factory expansion chamber for a perfectly tuned and performance optimized system

CLOSED COURSE / COMPETITION USE ONLY

CLOSED COURSE / COMPETITION USE ONLY

472.05.979.001  CCCUO 85 SX

18 – 20

FMF POWERCORE 2 SILENCER – Outer sleeve manufactured from high-grade aluminum – Lightweight – Simple fitting – Easy to install – Specially developed for use in motocross – Recommended in combination with an FMF factory expansion chamber for a perfectly tuned and performance optimized system CLOSED COURSE / COMPETITION USE ONLY

149


50/65/85 SX

777.01.939.010  777.01.939.020  777.01.939.030 

U691.2010  50 SX

85 SX 01 – 20

20 MM

777.02.944.000 

30 MM

65 SX 85 SX

13 – 20

HANDLEBAR RISER These CNC-machined, high-strength aluminum handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights.

U695.0997  65 SX

10 MM

02 – 20

RENTHAL HANDLEBAR DO YOU KNOW that KTM handlebars must withstand very extensive and specially developed test cycles before they go to market? The facts: – All KTM handlebars are made from EN AW 7010 T6 aluminum – Position markings for simple setting – Includes bar pad

471.02.901.100 / 04  85 SX

13 – 20

454.02.001.000 / 04  SX-E 5  20 HANDLEBAR The special aluminum alloy used for this handlebar makes it possible to eliminate the cross brace, without any negative impact on the required rigidity and flexibility of the handlebar.

789.01.939.044  789.01.939.144  789.01.939.244  789.01.939.344  789.01.939.444  SX-E 5 85 SX

14 – 20 13 – 20

CLAMP – Includes plastic insert – The brake or clutch control rotates in the case of a minor fall – Reduces the risk of a lever being broken – Suitable for all Brembo® brake and clutch systems

32 MM 37 MM 42 MM 47 MM 52 MM

20 13 – 20

HANDLEBAR MOUNT KIT Available in five different heights. Kit includes 2x handlebar support lower parts and 2x fastening bolts. Please note, upper parts and bolts required for clamping the handlebar are taken from the original handlebar support.

SXS.07.125.200  85 SX

13 – 20

PROGRESSIVE HANDLEBAR DAMPING SYSTEM (PHDS) The CNC-machined handlebar mounting with cushioning rubber inserts helps relieve wrist and shoulder joints. Further benefits of the PHDS: – Helps cushion and absorb heavy hits – Absorbs chassis and engine vibrations – Additional handlebar damping on the horizontal axis – Optimum steering precision – Handlebar height adjustable to 2 positions – Further damping elements available in three degrees of hardness (soft, medium, hard) for individual customization

151


50/65/85 SX

781.02.924.000  50 50 65 85

SX MINI SX SX SX

CLOSED END

12 – 20 12 – 20 09 – 20 03 – 20

LOCK-ON GRIP SET – Grip replacement made easy – Right grip permanently glued onto the throttle grip – Left grip with aluminum clamping ring for fastening onto the handlebar – Laborious process of gluing and securing grips with safety wire no longer necessary

790.02.924.100  85 SX

720.13.902.244 / 04  CLOSED END

18 – 20

LOCK-ON GRIP SET – Grip replacement made easy – Grips are locked onto the hadlebar by a clamp – Left grip with aluminum clamping ring for fixing onto the handlebar – Laborious process of gluing and securing grips with safety wire no longer necessary

65 SX 85 SX

14 – 20 14 – 20

FLEX BRAKE LEVER Minimize the possibility of a broken lever with these levers that are designed to fold away upon contact with the ground.

720.02.931.244 / 04  65 SX 85 SX

14 – 20 14 – 20

FLEX CLUTCH LEVER Minimize the possibility of a broken lever with these levers that are designed to fold away upon contact with the ground.

721.02.979.000 / EB 721.02.979.000 / 28 721.02.979.000 / 30 65 SX 85 SX

14 – 20 13 – 20

HANDGUARD – Open version – Manufactured with two-component injection molding technology – Black mid-section = maximum strength for optimum protection – Colored top and bottom parts = highly flexible, enduring even the roughest of treatment – Attaches directly at the levers with a special mount

781.02.922.000 

U695.1716 

MUD GRIPS The mud grips are simply pulled over existing grips and provide a secure hold on the grip rubber, even in extremely muddy conditions, thanks to their special material mix.

GRIP DONUT SET Optimum protection against thumb blisters with these coated neoprene rings. Simply slide onto the grips.

153


MASTER THE RIDE

WP XACT PRO 7535 Fork

The WP XACT PRO 7535 Fork for the KTM 65 SX offers individual adjustability along with well-spaced maintenance intervals. • • • •

Adjustable rebound damping Adjustable compression damping Stepless adjustable spring preload All adjustments externally performable with standard tools

HOW TO ORDER The high-quality and fully adjustable WP XACT PRO 7736 Shocks for the KTM 50 and 65 SX product line up offer the highest performance in these classes. Due to modern, friction optimized components, the shock absorber significantly gains performance and reduces the physical efforts of the young rider.

WP XACT PRO 7736 Shock

WWW.WP-SUSPENSION.COM

• • • •

Adjustable rebound Adjustable high & low-speed compression Stepless adjustable spring preload All adjustments externally performable with standard tools

These WP PRO COMPONENTS are available only directly via your WP Authorized Center Network. To find the right article number for your bike, visit the suspension configurator at www.wp-suspension.com/product-finder or directly search for your authorized center at www.wp-suspension.com/authorized-centers.


WP XACT PRO 7746 Shock

The high-grade and fully adjustable WP XACT PRO 7746 Shock for the KTM 85 SX has been developed on the basis of extensive experienceand test results gained in international racing series. They provide complete setting options for simple optimization of the bike to the requirements of junior riders. • • • • • •

WP XACT PRO 7443 Fork

The WP XACT PRO 7443 Fork for the KTM 85 SX combines two of WP’s greatest technologies, the Cone Valve damping system and the AER spring system: • • • •

 llows for customized setup and improved comfort throughout the stroke A Unlimited opening up of WP Cone Valve, system means reduced harshness Cone Valve system reduces the amount of shims, which limits the possibility of bent shims over time AER technology saves up to 2.2 lbs compared to conventional competition forks

WWW.WP-SUSPENSION.COM

 ore traction and grip from the rear wheel allows for better acceleration M The motorcycle rides higher over a series of bumps (no “packing down”) Increased comfort when riding Adjustable rebound damping Adjustable high and low speed compression damping Continuously adjustable spring preload

HOW TO ORDER These WP PRO COMPONENTS are available only directly via your WP Authorized Center Network. To find the right article number for your bike, visit the suspension configurator at www.wp-suspension.com/product-finder or directly search for your authorized center at www.wp-suspension.com/authorized-centers.


50/65/85 SX

DID YOU KNOW that all KTM CNC parts are manufactured from the highest grade of aluminum, and therefore not only look great, but can also withstand the toughest of treatments? The original factory look, anodized aluminum KTM PowerParts are just the thing to give your KTM that something special.

SXS.16.050.044 

SXS.12.065.044 

50 SX

65 SX

16 – 20

CHAIN ADJUSTMENT KIT CNC-machined version, highly resistant aluminum. Precise anodized surface.

SXS.13.050.034  50 SX MINI 50 SX

09 – 20

CLUTCH SLAVE CYLINDER PROTECTION CNC-machined from high-strength aluminum; the best possible and most effective protection for the clutch slave cylinder.

SXS.14.050.132 

09 – 20 09 – 20

50 SX

FACTORY OUTER CLUTCH COVER

09 – 20

FACTORY IGNITION COVER

472.32.975.044  85 SX

18 – 20

CLUTCH SLAVE CYLINDER PROTECTION – Prevents damage to the engine case in the event of the chain breaking – Helps prevent dirt and mud from packing in between the chain and engine case – CNC-machined from high-strength aluminum – Best possible and effective protection for the clutch slave cylinder

472.30.926.000 

SXS.14.065.032 

85 SX

65 SX

18 – 20

FACTORY CLUTCH COVER OUTSIDE

09 – 20

FACTORY IGNITION COVER

159


50/65/85 SX

791.01.900.000  50 / 65 SX 85 SX

720.02.903.000  65 SX 85 SX

17 – 20 18 – 20

BLEEDER VALVE Bleeder valve designed especially for WP forks. A quick press of the finger and the fork is bled.

472.07.940.000  85 SX

18 – 20

HIGH SEAT Grow a little with the bike. For the somewhat taller racers of the future. Approx. 20 mm higher than the standard seat.

472.07.940.200  85 SX

18 – 20

LOW SEAT Just made the switch and not big enough for the bike yet? The low seat provides shorter riders with optimum control of the motorcycle. Approx. 15 mm lower than the standard seat.

14 – 20 13 – 20

CLUTCH RESERVOIR COVER

777.10.976.050 / 04  50 / 65 SX 85 SX

17 – 20 18 – 20

VALVE CAP SET Orange anodized valve caps with valve opening function.

700.13.903.000  65 SX 85 SX

14 – 20 13 – 20

472.07.940.400 

BRAKE CYLINDER COVER

85 SX

777.10.976.150 / 04  50 / 65 SX 85 SX

17 – 20 18 – 20

18 – 20

STEP-UP SEAT For the factory riders of the future. Due to the special step, there’s no slipping, even when opening up the throttle. Standard seat height.

VALVE CAP SET Orange anodized valve caps.

794.30.920.044  50 / 65 SX 85 SX FACTORY OIL PLUG

09 – 20 08 – 20

791.01.920.000 / 04  50 / 65 SX 85 SX

17 – 20 18 – 20

COMPRESSION ADJUSTER

161


50/65/85 SX

472.08.007.000 / 28 

472.06.004.000 / 28 

85 SX

85 SX

18 – 20

FRONT NUMBER PLATE

18 – 20

SIDE PANEL RIGHT

472.03.094.000 / 33  85 SX

18 – 20

FRAME PROTECTION SET Helps prevent damage to the powder coating from dirt, crashes or the rider’s boots.

472.08.010.000 / 28 472.08.010.000 / EB 85 SX

18 – 20

50 SX

18 – 20

U695.1010 

16 – 20

FACTORY FUEL TANK CAP VENT

454.03.994.000 / EB  SX-E 5

85 SX SIDE PANEL LEFT

FRONT FENDER

453.03.994.000 / EB 

472.06.005.000 / 28 

20

463.03.994.000 / EB  65 SX

16 – 20

472.03.994.000 / EB 

472.08.054.000 / EB 

85 SX

85 SX

16 – 20

FRAME PROTECTION STICKER SET For protecting the frame without altering the slim lines of your bike.

18 – 20

472.08.013.000 / EB 

SHROUD SET

85 SX

18 – 20

REAR FENDER

781.07.908.144  65 SX

10 – 20

777.07.908.244 

472.06.001.000 / 28 

472.01.094.000 / 28 

85 SX

85 SX

85 SX

13 – 20

FACTORY FUEL TANK CAP

AIR BOX COVER

18 – 20

18 – 20

FORK PROTECTOR SET

163


50/65/85 SX

52.000.140  85 SX

05 – 20

PROTECTIVE FORK STICKER SET Extra thick film helps protect the outer fork tubes against roost.

472.08.990.000  85 SX

18 – 20

FACTORY GRAPHICS KIT Stock just not your thing? Customize your own jaw-dropping motorcycle and stand out from the competition. Rim sticker set not included.

453.08.990.000  50 SX

16 – 20

FACTORY GRAPHICS KIT

463.08.990.000  65 SX

16 – 20

FACTORY GRAPHICS KIT

165


50/65/85 SX

700.10.160.000  85 SX

230 MM 

13 – 20

WAVE BRAKE DISC (REAR) – Manufactured from special high-grade stainless steel – Wave design for added braking performance – Minimal brake pad wear – The rear brake caliper mounting kit 720.10.960.044 is also required for mounting

472.09.960.000  85 SX

260 MM 

13 – 20

WAVE BRAKE DISC (FRONT) – Floating brake disc manufactured from special high-grade stainless steel – Wave design for added braking performance – Minimal brake pad wear – The front brake caliper mounting kit 720.09.960.044 is also required for mounting

451.10.265.104  50 SX / MINI SX-E 5

03 – 20 20

461.10.165.112  65 SX

03 – 20

725.13.975.000 / 30 

471.10.965.124 

85 SX

85 SX

13 – 20

BRAKE CALIPER SUPPORT Lighter and stiffer than the standard brake calliper support. The stiffness has a positive effect on such braking properties as braking power. CNC-machined from the highest grade of aluminum and anodized black. Option available: Carbon brake disc guard 777.13.975.030.

– 20

CHAIN Sometimes less means more! O- and Z-rings have been dispensed completely throughout the chain. The special construction of the bearing bushes result in the perfect compromise between durability and minimum power loss. Specially developed for motocross use.

720.10.961.000  REAR 85 SX

13 – 20

BRAKE DISC GUARD Helps protect the rear brake disc from roost and other solid objects. Made from high-strength aluminum.

777.13.975.030  REAR

472.09.961.000  FRONT

472.10.951.048 / 04  472.10.951.049 / 04  472.10.951.050 / 04 

85 SX

85 SX

85 SX

13 – 20

BRAKE DISC GUARD Helps protect the rear brake disc from roost and other solid objects, while maintaining minimal weight. Designed to fit CNC brake calliper support 777.13.975.010/30 or 777.13.975.110/30

18 – 20

BRAKE DISC GUARD Very practical: The intelligent fitting system with central adapter replaces the spacer sleeve on the wheel axle and allows the tire to be changed, brake to be serviced, etc., without removing the brake cover.

T48 T49 T50

18 – 20

REAR SPROCKET – Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world – Chain runs accuracy of 0.002 mm – Anodized orange with a permanent, organic and environmentally friendly pigment

167


50/65/85 SX

461.10.051.150 / 04  65 SX

T50

472.06.920.000 

– 20

85 SX SUPERSPROX STEALTH REAR SPROCKET If you’re looking for the ultimate in quality and performance, this sprocket is the one for you! – High-strength steel teeth, gives a longer service life – Aluminum inner ring, to reduce unsprung weight – Joined together permanently with high-strength rivets – At least three times longer service life than other aluminum rear sprockets – 50% lighter than a conventional steel rear sprocket 2K sprockets are exclusively produced for KTM by Supersprox. This product is protected under the following patents in Europe and USA. EU patent # EP1573234. US Patent # 7.481.729. Patent owner Supersprox, a.s.

18 – 20

DUST COVER FOR AIR FILTER This large-pored air filter cover acts as an additional protective layer, hence extending the time between filter service intervals. Recommended in extremely dusty conditions.

U691.3128 50 SX

790.06.922.000  85 SX

18 – 20

SAND COVER FOR AIR FILTER Recommended for use in sandy conditions. Suggested installation together with oiled air filter and dry dust guard 590.06.019.000, 772.06.920.100, 790.06.920.000 or 472.06.920.000.

T38 14 – 20

RENTHAL REAR SPROCKET

U695.1251 U691.1024 U695.1252 U695.1253

T46 T47 T48 T49

65 SX RENTHAL REAR SPROCKET

462.03.990.000  65 SX

09 – 20

472.03.990.000  85 SX

U695.1254 U695.1255 U695.1256 U695.1257 U695.1258

T44 T45 T46 T47 T48

85 SX

18 – 20

SKID PLATE This generation of aluminum skid plate provides the most effective protection for both frame and engine. – Made from 4 mm-thick, high-strength, robust aluminum – Extremely durable and endurance tested for the toughest offroad use – Custom design – specially developed for KTM models – Highest quality of workmanship – Quick and simple installation

RENTHAL REAR SPROCKET Made exclusively for KTM by Renthal, these orange anodized rear sprockets are used by the KTM Factory Race teams. Lightweight, durable and provide great performance.

169


TOOLS + TRANSPORTATION TOOLS

510.12.092.000

SHORT 

TIRE LEVER Practical tire iron – short version ideal for portable tool bags.

510.12.093.000

LONG 

TIRE LEVER Practical tire iron – long version for minimum effort.

780.29.962.000 / 30  SCREW PAN Magnetic. Never loose a bolt again! Perfect for use in combination with SX stand 780.29.155.000.

781.29.984.000  TIRE LEVER KIT Made from high-strength, orange-anodized aluminum; not suitable for fitting tires with mousse tubes. Integrated ring spanners 32, 27, 17, 13 and 10 mm.

000.29.098.200  SCREWDRIVER KIT High quality, 5-piece screwdriver set in the traditional KTM design.

000.29.901.000  BEAD BUDDY The Bead Buddy acts as your third hand when fitting tires. Holds the tire in the tire bead, thereby making tire fitting much easier. Device simply hooks over the spoke and pushes the tire bead down on the opposite side of the tire from the tire irons. Highly recommended for tire fitting with mousse tubes.

171


TOOLS + TRANSPORTATION TOOLS

000.29.996.000 

772.12.991.100 

000.29.098.300 

U695.1130 

TORQUE WRENCH High-quality, adjustable torque wrench 2 – 25 NM, includes the following accessories: – Push-on spoke wrenches in sizes 5.65 and 6.95 mm – Push-on 1/4” rachet – Ratchet attachments: 8, 10, 13 mm socket wrench and 15 mm Torx bit

SPOKE WRENCH 6 mm and 6.8 mm.

TOOLBOX 38-piece, 1/4" toolbox in orange with high-quality, chrome-vanadium tools. – Ratchet (with locking device), lever, two extensions and socket wrench – Hexagon sockets from 4 to 14 mm – Allen keys from 3 to 8 mm – Phillips, slotted and Torx bits With this toolbox, small jobs on your KTM can be completed quickly and reliably. Whether you’re removing plastics or changing the oil, you’ll definitely find the right tool here.

CABLE TIE 100 pieces, length: 20 cm.

000.29.020.000  50 / 65 SX SPOKE WRENCH 5 mm and 5.6 mm.

000.29.999.300  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

07 – 20 07 – 20 08 – 20 08 – 20

BOLT KIT Contains all the most-used bolts and small parts for a wide range of KTM offroad models. A 30% savings compared to purchasing these parts individually.

000.29.015.000 

579.29.020.000 

WIRE PLIERS Recommended, very practical, high quality tool to help you twist safety wire 548.12.016.000 like a professional.

CHAIN BREAKER 5/8" x 1/4"

000.29.098.400 

548.12.016.000 

000.29.920.000 / EB 

SAFETY WIRE 200 m wire with 0.61 mm diameter.

CHAIN GAUGE Gauge to check tension and lengthening of the chain.

TOOLBOX 60-piece, 3/8" toolbox in orange with high-quality, chrome-vanadium tools. Tools included: – Ratchet (with locking device), lever, two extensions and socket wrench – Hexagon sockets from 6 to 24 mm – Allen keys from 3 to 10 mm – Phillips and slotted bits – Torx bits from 15 to 55 mm With this toolbox, small jobs on your KTM can be completed quickly and reliably. Whether you’re removing plastics or changing the oil, you’ll definitely find the right tool here.

173


TOOLS + TRANSPORTATION TOOLS

590.29.041.000  503.05.017.000 / C1 

FEELER GAUGE 0.10 mm; 0.12 mm; 0.15 mm; 0.20 mm; 0.25 mm

794.12.966.100 

SPRING HOOK Simple spring removal.

590.29.041.100 

DIGITAL FORK PUMP The perfect tool for tuning your air fork. With this high quality pump, extensively tested by KTM, you can set your air fork effectively and perfectly to your needs and the current track conditions, in a matter of seconds. The one tool that ensures you are READY TO RACE.

FEELER GAUGE 0.05 mm; 0.10 mm; 0.15 mm; 0.20 mm; 0.25 mm; 0.30mm; 0.35 mm

000.29.016.000  CLOSED CARTRIDGE SX / XC SX-F / XC-F

07 – 20 07 – 20

COMBINATION TOOL Recommended tool for removing the screw caps. Fits all closed cartridge forks.

773.29.068.000  TIRE PRESSURE GAUGE Comfortable and easy to use. Fits all standard valves. Pressure display in bar or psi. Integrated pressure release valve for accurate pressure adjustments. Switchable display and work area lighting. Energy-saving function with automatic cut-off. Maximum measuring pressure: 60 psi.

583.12.078.000  TOOL BAG The optimum solution for always having the most important tools on hand when on the road.

796.19.910.000  125/150 SX 250 SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

16 – 20 17 – 20 16 – 20 17 – 20 17 – 20

SPANNER WRENCH Practical tool for setting preload on the shock absorber without having to remove it.

583.10.025.000 

000.29.997.000 

U695.1099 

WHEEL ALIGNMENT GAUGE The ideal tool for checking perfect wheel position when tensioning the chain.

MULTI-PURPOSE TOOL The perfect tool for when on the go! Conveniently packaged in a small bag, you can use the multi tool with the following fittings: 14, 12, 10, 8 mm hexagon sockets; 6, 8, 13 mm socket wrench; inserts for slotted and Phillips screw heads, 5 mm / 6 mm Allen keys, 25 / 30 and 40 / 45 Torx; bottle opener; and 3/8” and 1/4” socket drives.

TIRE PRESSURE GAUGE Easy to use! Measuring range 0 - 60 psi. Clamping head rotatable through 360° on a flexible stainless steel feed line. The valve shaft is therefore accessed easily and quickly. Very accurate measurements by way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).

175


TOOLS + TRANSPORTATION TOOLS

796.29.974.500  SX-F / XC-F XCF-W / EXC-F 150/250/300  XC-W

773.12.030.000 

17 – 20 17 – 20 17 – 20

BATTERY CHARGING AND TESTING UNIT – Specially developed for LiFePo4-batteries – Voltages 13.2 V – Charging current – 2.5 amps – Optimizes battery performance and service life – Recovery mode for low battery voltage – Precise battery monitoring

FOOT PUMP Small, lightweight and very portable – saves the day in the event of a puncture on the move! Mini-foot pump with pressure gauge on the swiveling valve head that fits all prevalent valves. Integrated double-cylinder with pressure switch-over to high pressure. Maximum 12 bar / 160 psi. Height: approx. 170 mm when folded together.

584.29.074.100  BATTERY CHARGING AND TESTING UNIT A must for every workshop / garage. Testing, charging and keeping batteries charged made easy. Fully automatic and economical battery charging by means of programmed charge characteristic. Clear LC display shows charging level. Reverse polarity protection, short-circuit protection and overload protection. CAUTION: The battery charging and testing unit must not be connected to lithium-ion batteries for longer than 24 hours, lithium-ion batteries are also not suitable for trickle charging.

177


TOOLS + TRANSPORTATION TOOLS

452.06.998.000 / 04  50 SX MINI 50 SX

09 – 20 09 – 20

AIR FILTER BOX COVER Highly recommend! Helps protect the air intake against water and dirt when cleaning the air filter box.

790.12.030.000 / 04  EXHAUST PLUG Helps keep water out of the silencer during cleaning. For internal diameters 37 – 62 mm.

780.29.064.000 / 04  812.12.016.100 

SPARK PLUG BOX With space for storing fuses.

250/350 SX-F 11 – 20 450 SX-F 13 – 20 250/300 XC-W TPI 19 – 20 EXC-F 12 – 20 WASH CAP SET A must when washing the motorcycle with the fuel tank removed. Helps prevent water from entering the fuel line.

463.06.998.000 / 04  65 SX

98 – 20

EXHAUST PLUG Helps keep water out of the silencer during cleaning. For inner diameters 15 – 38 mm.

AIR FILTER BOX COVER

472.06.998.000 / EB  85 SX

790.12.030.100 / 04 

18 – 20

AIR FILTER BOX COVER

781.29.994.000 

780.29.065.000 / 04 

780.29.063.000 

FORK SEAL DOCTOR This clever tool is a must for every motorcycle toolbox. With it, you can remove dirt from your fork seals effortlessly. No matter whether it’s in the garage or at the track. This tool extends the life of your seals many times over. For all 48 mm forks.

OIL BOTTLE Perfect for all 2-stroke riders on the go. The small bottle fits right in your tool bag or jacket. Capacity 250 ml, with scaling for different mixture ratios (1:40 / 2.5 %; 1:50 / 2 %; 1:60 / 1.7 %; 1:80 / 1.25 %).

MEASURING CUP With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of two-stroke fuel. Simple handling thanks to the ergonomic design. Volume 1,000 ml.

790.06.998.100 / 04  125/150 SX 250 SX / XC SX-F / XC-F XC-W XCF-W / EXC-F AIR FILTER BOX COVER

16 – 20 17 – 20 16 – 20 17 – 20 17 – 20

548.29.035.000  MUD REMOVAL TOOL Use this to remove the dirt from your last mud battle with ease! A rubber motorcycle grip (not included) can be fitted onto the grip.

179


TOOLS + TRANSPORTATION TOOLS KTM Motorex co-branded products are the direct result of a decade-long racing and development partnership between KTM and Motorex. The research and development over the years results in the absolute best oil available for your KTM motorcycle. KTM Motorex oils are formulated from the highest-quality synthetic PAO and Ester base stocks and are JASO MA certified. JASO MA oils are required for use in four-stroke KTM motorcycles that use a single oiling system for the engine, transmission and wet clutch system. KTM Motorex guarantees MA performance in its JASO MA-rated lubricants

U691.3031 250 ML

U691.3036 1 L / 6

MOTOREX BRAKE FLUID 5.1

MOTOREX MOTO CLEAN

U691.3026

U691.3035

U691.3020 1 L / 12

U691.3021

1 L / 12

1 L / 12

MOTOREX CROSS POWER 2T PREMIX

MOTOREX COOLANT 3.0

4 L / 4 MOTOREX AIR FILTER CLEANER

U691.3032

U691.3022 1 L / 12

U691.3023 4 L / 4

U691.3024

1 L / 12

U691.3030

U691.3033

1 L / 12

4 L / 4

MOTOREX AIR FILTER OIL

MOTOREX POWER SYNT 4T 10W / 50

DRUM MOTOREX CROSS POWER 4T 10W / 50

U691.3025 1 L / 12

U691.3028

MOTOREX CROSS POWER 4T 10W / 60

MOTOREX OFFROAD CHAIN LUBE 500 ML

U691.3027 1 L / 12 MOTOREX TOP SPEED 15W / 50

181


TOOLS + TRANSPORTATION

TOOLS + TRANSPORTATION

STANDS

STANDS

777.03.020.000  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

03 – 20 03 – 20 03 – 20 03 – 20

451.03.023.300  50 SX

– 20

470.03.020.000  65 / 85 SX

03 – 20

PLUG-IN STAND

780.29.155.000 

UPP.15.29.010

U695.1277 

BIKE STAND High quality plastic stand designed especially for KTM offroad bikes. Special features: – Two different heights possible – Can be used as a stand for the quickfill system – Storage space for the front and rear axle when removing the wheels – Attachments included for the following parts: mud removal tool, exhaust plug, magnetic bolt pan and other various tools

BIKE STAND

BIKE RAMP High quality, folding aluminum ramp with straps for secure attachment on loading. Weighing only 12 lbs, it withstands a load of 400 lbs. The total length is approx. 6´6˝, folded approx. 3´3˝.

UPP.15.29.011 50/65/85 MINI BIKE STAND Mini stand made especially for 50 / 65 / 85 SX models! Aluminum construction with a non-slip pad. The top is wedge shaped and solid so the bike doesn’t slide around while washing. Powder-coated orange.

780.29.155.100  BIKE STAND KIT High quality plastic stand designed especially for KTM offroad bikes. Complete with mud removal tool, exhaust plug, screw driver set and magnetic bolt pan.

781.29.955.100  315 / 425 MM SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

789.29.955.100  260 / 370 MM SUPERMOTO LIFT STAND Available in two different heights: SX / EXC: 315 mm / 425 mm SUPERMOTO: 260 mm / 370 mm Maximum weight capacity: 330 lbs

790.29.094.000  SX / XC SX-F / XC-F XC-W XCF-W / EXC-F

781.12.973.000 781.12.973.000 / 99 

MULTI PLUG-IN STAND Plug-in stand and fork support, combined in one unit: – Two tools in one, saves space during transport of your bike – Stabilizes the motorcycle during transport – Protects the fork shaft sealing rings and fork springs against damage, which may otherwise be caused by being tied down with too much force during transport – After transport it serves as the perfect plug-in stand

PLASTIC DRUM 5 gallon, KTM plastic drum for use on the racetrack. Complete with flexible hose and screw cap. Not to be used for storage and transportation of gasoline. Replacement parts available: Hose - U690.8899 Cap - U691.0033 Vent cap - U691.0034 Decal - 781.12.973.001

590.29.050.000  FUNNEL Funnel specially developed for KTM motorcycles. Diameter (small and large) optimized to suit the filler neck; special groove for optimum ventilation.

183


TOOLS + TRANSPORTATION TRANSPORTATION

780.12.006.000  SERVICE PIT MAT Now required at many racing events. The special material mix prevents spilt fuel from seeping into the ground. The mat also helps in finding fallen tools, bolts and other small loose parts when servicing outdoors. The special KTM design brings the total factory look to your pit. Size: 5´ X 3´3˝

000.29.940.000 

400 MM

CABLE RING – Easy handling and operation – Less wear on the cord – Made of high quality material – Cable not included

790.12.906.100 

790.29.930.000 

SERVICE PIT MAT Features include: – Made from polyester, with special rubberized backing – Gas and oil resistant – READY TO RACE design – Size: 3’3” x 5’6”

PIT BOARD To display the most important information to your rider during racing and practice. Marker included.

185


TOOLS + TRANSPORTATION TRANSPORTATION

U691.0046 SOFT TIE DOWNS WITH HOOKS Our KTM tie-downs feature built-in soft tie loops that allow these tie-down straps to have soft ties built in, so you don’t scratch your bars. KTM orange / black with distinctive KTM PowerParts logos.

600.12.016.000 

610.12.016.000 

548.12.004.000 

BRAKE LOCK Helps prevent front wheel movement when bike is parked, or use to aid in lifting a bike onto the stand.

TRANSPORT COVER For rear sprockets up to 50T and 220 – 260 mm brake discs.

U691.0047 SOFT TIE DOWNS WITH CLIPS Our KTM tie-downs feature built-in soft tie loops that allow you to secure your KTM without scratching your handlebars. These extra wide webbing units feature a clip hook on one end, plus high-quality friction lock fasteners. KTM orange /black with distinctive KTM PowerParts logos.

U691.0048

SXS.05.125.600 

548.29.094.100 

CLEAN GRIP SET Helps prevent dirty grips.

FORK SUPPORT – Stabilizes your motorcycle during transportation – Helps protect the fork shaft seal rings and fork springs from damage due to overly strong tightening down with lashing straps while transportation – Gets clamped in between the tire and the bottom of the front wheel fender

U-LOCK High-quality U-lock made from hardened steel with a double locking mechanism. Locking cylinder with optimum protection against any attempts at manipulation. 250,000 key versions. Two keys supplied as standard. Includes rotating PVC cover that protects the cylinder lock from dirt. High quality corrosion protection.

SOFT TIE DOWNS WITH RATCHET These tie downs offer the convenience of a soft tie with the additional benefit of a ratchet. Extra wide hooks allow you to secure your bike easily. Great for hauling heavier motorcycles. KTM orange/black with distinctive KTM PowerParts logos.

U691.0049 SOFT TIES These tough KTM soft ties allow you to strap down your bike without scratching your handlebars or tank. Built from a durable ballistic nylon, they have a 615 lbs. weight capacity. Black with distinctive KTM PowerParts logos. Dimensions: 1.5” x 24”.

187


TOOLS + TRANSPORTATION TRANSPORTATION

613.12.007.000  PROTECTIVE OUTDOOR COVER “BEAST” The KTM outdoor bike cover provides year round protection for your motorcycle. Cover is made from an exclusive, pigmented fabric. Carrier bag included.

625.12.007.000  PROTECTIVE INDOOR COVER No chance for dust, scratches, etc. The indoor bike cover turns every KTM into a real eye-catcher in the garage. The fabric consists of a special material with a distinctive structure that is completely impermeable to dust and dirt. The inner side has a soft lining.

590.12.007.000  PROTECTIVE OUTDOOR COVER The KTM outdoor bike cover provides year round protection for your motorcycle. The cover is made from an exclusive, pigmented fabric. Carrier bag included.

189


Every authorized KTM dealer will be pleased to advise you on the exact scope of supply of the KTM PowerParts, any necessary mounting parts, as well as appropriate part variants for your particular KTM motorcycle. Professional advice and proper installation of the KTM PowerParts by an authorized KTM dealer using KTM special tools are essential to provide maximum functionality. LEGAL DISCLAIMER KTM North America, Inc. reserves the right, without prior notice and without specifying reasons, to amend technical specifications, fittings, scope of supply, colors, materials, services offered and provided, etc., or to discontinue them without replacement, or to stop manufacturing a particular product. All information concerning the scope of supply, appearance, services, dimensions, and weights is non-binding and specified with the condition that mistakes, printing, setting, and typing errors may occur; such information is subject to change without notice. All of the items in this catalog have been designed/developed especially for the needs and demands of offroad motorsport. This is why only those KTM PowerParts, where it is explicitly stated to that effect, are approved for use in traffic (“homologized for street use”). The items in this catalog have been developed and are intended for closed course competition use and racing applications only. Any other usage violates U.S. Federal and/or state law and could be and are approved to meet U.S. Federal and California emission requirements for highway/ on-road use. DO NOT attempt to imitate the illustrated riding scenes. The riders illustrated are professional motorcycle riders. The photos were taken on closed racing circuits or closed roads. KTM wishes to make all motorcyclists aware that they need to wear the prescribed protective clothing and always ride in a responsible manner in accordance with the relevant and applicable provisions of the road traffic regulations. Only homologated versions of motorcycles promoted in this catalog are suitable for on road use. Some products in the KTM PowerParts range are not approved for use on public roads in certain circumstances (varies from country to country). Please note that model specifications may vary from country to country. The statutory warranty of the respective country applies. European specification models shown

ITEM NO. 20200006NA

© 2020, KTM NORTH AMERICA, INC.

for illustration purposes only.

KTM NORTH AMERICA, INC. 1119 Milan Avenue, Amherst, OH 44001 38429 Innovation Court, Murrieta, CA 92563 8701 Rue Samuel-Hatt, Chambly, QC J3L-6V4 www.ktm.com

/ktmusa /ktm_canada

Photos: R. Schedl, H. Mitterbauer, F. Montero, KISKA GmbH

subject to fines. Only items explicitly designated to be “50 State Legal” have been developed

Profile for KTM GROUP

KTM PowerParts Offroad 2020 USA  

KTM PowerParts Offroad 2020 USA