KTM PowerParts Catalog Street USA 2011 by KTM GROUP

are You readY ?

»www.ktmusa.com

www.ktmusa.com

Always consult your local authorized KTM dealer for the range of conversion parts, replacement parts, necessary mounting parts, as well as any and all part options for your particular KTM model. KTM WILL NOT BE HELD LIABLE FOR IMPROPER INSTALLATION OR USE OF THESE PRODUCTS. Please follow all instructions provided. Professional advice and proper installation of the KTM_PowerParts by an authorized KTM dealer are essential to provide maximum safety and function. KTM North America reserves the right to alter or discontinue without replacement, equipment, technical details, colors, pricing, materials, services, service work, etc. without notice and without reason, as well as cease production of certain models without prior notice. For this reason, we recommend you ask your local authorized KTM dealer for further information before ordering or purchasing a specific model. KTM North America accepts no liability for printing errors.

U 6

Photos: A. Barbanti, Buenos Dias, H. Mitterbauer, redeye, R. Schedl, P. Mathis

LEGAL DISCLAIMER Should not be emulated. The riders illustrated are professional motorcycle riders. The photos were taken on a close racing circuit or closed roads. KTM draws to the attention of all motorcycle riders that they should abide by all traffic laws and regulations, that they should wear the recommended protective clothing and always ride in a responsible way. Some photos feature European Spec motorcycles.

Powerwear/PowerPartsstreet2011

for innovations see »

www.kiska.com

»www.ktmusa.com

twitter.com/ktmusa

powerwear/powerparts KTM North America, Inc. KTM Canada, Inc.

38429 Innovation Court, Murrieta, CA 92563 1375-1 Marie-Victorin, St-Bruno, QC J3V 6B7

www.ktmusa.com www.ktmcanada.com

STREET 2011

ThE pOwER iS in ThE DETAiLS»

Whether you like to burn through the canyons on Sunday morning or get lost daydreaming along fence rows in the heartland you are a KTM rider. An Orange Bleeder. Someone who always takes the path less traveled. Riding a KTM Motorcycle is a fantastic way to spend your hard earned leisure time and in the next 157 pages we give you over 600 possible accessories to help make the bike uniquely yours.

Each KTM PowerPart & PowerWear item is carefully tested, engineered, and proven to meet the same high standards we set for our bikes. From race tracks to two-tracks, KTM PowerParts and PowerWear products are rigorously tested in the real world to make sure they are worthy of the KTM name. For us “Ready to Race” isn’t just a slogan. It’s how we conduct business.

So get out and ride, you deserve it!

Street Equipment 4 RC8 990 Super Duke 950 / 990 Supermoto 950 / 990 Adventure 690 LC4 Tools Overview

12 38 60 88 110 146 158

street equipment

STREET EqUipMEnT »

(S/48) 3 3pw111012 (M/50) 3 3pw111013 (L/52) 3pw 3pw111014 (XL/54) 3 3pw111015 3pw111016 (XXL/56) 3 3pw111017 (XXXL/58) 3 TECh 1R SUiT KTM TEC 1.3 mm top grade leather with extended perforated panels on upper and lower body. External PU shoulder and knee protectors. Aramidic stretch panels on sleeves and crotch areas. Removable inner mesh liner with 3D mesh liner insert on the back for comfort. YKK® zippers. Patented calf expansion pockets. CE certified elbow and knee/shin protectors. Exclusively for KTM by Alpinestars.

STREET EqUipMEnT Âť

9 (M) 3pw111123 (L) 3pw111124 (XL) 3pw111125 (XXL) 3pw111126

(M) 3pw111133 (L) 3pw111134 (XL) 3pw111135 (XXL) 3pw111136

VEnTED JACKET

pURE ADVEnTURE JACKET

Breathable summer jacket. Upper material comprised of tear-resistant and abrasion-resistant polyester/ polyamide blended fabric. Excellent venting thanks to large ventilation zones in front and back. Comfort collar, SaSTec 3D protectors on shoulders and elbows. Waistband adjustment. Reflective areas. Small connecting zipper.

Wind and waterproof, breathable touring jacket made from polyamide. SaS-Tec protectors on the shoulders and elbows. Viscoelastic foam in back protector pocket, SaS-Tec back protector available as an option. Adjustable comfort collar. Waist adjustment. Wind and waterproof front closure. Ventilation zips at the front, back and on the sleeves. Long and short connecting zipper and seat web. Removable thermal lining. Removable Z liner.

(S/30) 3pw111222 (M/32) 3pw111223 (L/34) 3pw111224 (XL/36) 3pw111225 (XXL/38) 3pw111226 (XXXL/40) 3pw111227

(S/30) 3pw111232 (M/32) 3pw111233 (L/34) 3pw111234 (XL/36) 3pw111235 (XXL/38) 3pw111236 (XXXL/40) 3pw111237

VEnTED pAnTS

pURE ADVEnTURE pAnTS

Breathable summer pants. Upper material comprised of tear-resistant and abrasion-resistant polyester/polyamide blended fabric. Excellent venting thanks to large ventilation zones in front and back. Textile stretch zone on back below the waistband and on the front above the knee. SaS-Tec 3D protectors on the knee. Viscoelastic foam on the hip. Waistband adjustment. Doubled material on knee and seat panel. Calf width adjustment. Small connecting zipper.

Wind and waterproof, breathable touring pants made from polyamide with reinforcements on areas where you are likely to fall. SaS-Tec protectors on the knees. Stretch zones above the knee, in the hollow of the knee and on the back. High-cut back. Comfort stretch waistband, rapid waistband adjustment, calf width adjustment. Wind and waterproof front closure. Ventilation zip. Long and short connecting zipper. Removable thermal lining. Removable Z liner.

STREET EqUipMEnT »

(M) 3pw111143 (L) 3pw111144 (XL) 3pw111145 (XXL) 3pw111146 STREET EVO JACKET Street jacket with wind and waterproof, breathable PU membrane. Removable thermal lining for warm weather wear. Comfort collar, 3D protectors on shoulders and elbows. Visco-elastic foam in back protector pocket (SaS-Tec back protector available separately). Stretch zones for extra mobility. Long and short connecting zippers plus belt loop.

(M) 3pw111723 (L) 3pw111724 (XL) 3pw111725 (XXL) 3pw111726 pURE ADVEnTURE GLOVES

(S) 3pw111712 (M) 3pw111713 (L) 3pw111714 (XL) 3pw111715 (XXL) 3pw111716 KTM Gp pRO GLOVES

Waterproof touring gloves. Leather main construction with doubled leather on palm, index finger and thumb. The PU membrane keeps out the wet and cold.

PU injected wrist panel for impact and abrasion resistance. PU knuckle and finger protectors. Patented 3rd and 4th finger bridge. Full grain leather construction. TPR detailing. Synthetic suede palm reinforcement. Perforated leather panels for added ventilation. Top of the glove is internally reinforced with knit Kevlar ® and features highly abrasion resistant Pittards Armor-Tan leather at critical areas. Exclusively for KTM by Alpinestars.

(M) 3pw091723 (L) 3pw091724 (XL) 3pw091725 (XXL) 3pw091726 Aq RACER GLOVES

(39/6,5) 3pw101011 (40/7,5) 3pw101012 (41/8) 3pw101013 (42/9) 3pw101014 (43/10) 3pw101015 (44/10,5) 3pw101016 (45/11,5) 3pw101017 (46/12) 3pw101018 (47/13) 3pw101019 TECh TOURinG BOOT Perfect for long journeys and touring. Made by Alpinestars for KTM and designed to the highest standard. Features a fully waterproof Gore-Tex© membrane. Safety features include shin protector, ankle protector and heel and toe reinforcements.

Waterproof racing gloves that are able to withstand any tour. Leather construction, doubled in critical areas. HIPORA® membrane. Carbon knuckle cover. Hard plastic skid plate on the palm. TPR on the edge of the hand. Large TPR wrist closure. Silicone-printed KTM logos on the middle finger and index finger give a secure hold on the controls.

(39/6,5) 3pw101031 (40/7,5) 3pw101032 (41/8) 3pw101033 (42/9) 3pw101034 (43/10) 3pw101035 (44/10,5) 3pw101036 (45/11,5) 3pw101037 (46/12) 3pw101038 (47/13) 3pw101039 SUpERTECh R BOOT Racing boots made with patented, biomechanic, removable inner boot, with its own closure mechanism. Other features include: new air vent system; aerodynamical extremely flat outer surface; aluminum inserts at the heel. Comfortable entry through a side zip which goes all the way to sole. Exclusively for KTM by Alpinestars.

(S) 3pw111022 (M) 3pw111023 (L) 3pw111024 (XL) 3pw111025

(M) 3pw091713 (L) 3pw091714 (XL) 3pw091715 (XXL) 3pw091716

KTM BiOniC BACK pROTECTOR

VECTOR GLOVES

CE Level 2 Impact performance (under 9kN transmitted force) in accordance with EN 1621-2. Ergonomic 5 plate construction contours to the natural curve of the back. Plates lock to lessen overextension of the back. Excellent shock absorption even in repeated impacts. Thin, light, and substantially breathable core. Adjustable shoulder straps. Wide waist belt. Exclusively for KTM by Alpinestars.

Sport glove made of Pittards leather and goatskin featuring a carbon knuckle cover. TPU air vents on the fingers. TPR skid plate on the ball of the hand. TPR on the edge of the hand. Double wrist closure.

690.08.110.000 / 49

RC8

RC8 Âť

15 690.08.908.000 TinTED winDShiELD Special tinting improves the appearance of the bike particularly when using our carbon fairing.

690.08.901.000 / 49 CARBOn LEFT FROnT FAiRinG COMpLETE

690.08.902.000 / 49 CARBOn RiGhT FROnT FAiRinG COMpLETE

690.08.110.000 / 49 CARBOn FROnT FEnDER

690.08.050.000 / 49 CARBOn LEFT SiDE FROnT FAiRinG

CARBOn pARTS The finest carbon for a very elegant appearance and maximum weight reduction. Very impressive and detailed, proven by Akrapovics' many years of experience with carbon. The average weight reduction for each part is between 30% and 55%. Matte finish.

690.08.051.000 / 49

690.30.060.000 / 49

CARBOn RiGhT SiDE FROnT FAiRinG

CARBOn FROnT ChAin GUARD

RC8 »

690.08.041.000 / 49

690.08.043.000 / 49

690.08.044.000 / 49

690.07.025.000 / 49

CARBOn LEFT REAR FAiRinG

CARBOn LEFT SEAT FAiRinG

CARBOn RiGhT SEAT FAiRinG

CARBOn TAnK pAD LEFT

690.08.042.000 / 49

690.07.026.000 / 49

CARBOn RiGhT REAR FAiRinG

CARBOn TAnK pAD RiGhT

690.08.031.000 / 49

690.08.052.000 / 49

CARBOn REAR COVER

CARBOn LEFT SiDE REAR FAiRinG

690.08.032.000 / 49

690.08.053.000 / 49

CARBOn UnDERSEAT FAiRinG

DE REAR FAiRinG CARBOn RiGhT SiDE

690.04.050.000 / 49 CARBOn REAR FEnDER

690.08.999.000

690.08.055.000 / 49

690.08.056.000 / 49

CARBOn DECAL

CARBOn LEFT EXhAUST FAiRinG

CARBOn RiGhT EXhAUST FAiRinG

RC8 Âť

691.05.383.000 (OnLY FOR RACinG) EVOLUTiOn TiTAniUM SiLEnCER SET In combination with a modified appearance, this titanium exhaust system is an enhancement for all RC8 riders who would like to have great sound, light weight and an improved power output. The exhaust system can be mounted only in combination with 69105907100 headers. For proper mounting the lower fairing must be modified.

691.05.907.100 EVOLUTiOn TiTAniUM hEADER

RC8 »

USER SETTING TOOL – Fine tune fuel injection mapping – perfect for trackside adjustments

690.05.283.100 08 – 10 TiTAniUM SiLEnCER

690.05.907.000 690.29.096.140 RC8 R

USER SETTinG TOOL This Fuel Injection management tool works with your laptop to fine tune fuel injection settings, build track specific maps, and log riding data. Software can be downloaded from www.KTM.com and includes 2D and 3D modeling. For closed course use only.

08 – 10 TiTAniUM hEADER In short: "Akrapovic at it's best", from a technical standpoint and also appearance. This superstock exhaust was specially developed for the RC8. Thanks to the experienced Akrapovic racing division which was included in the R&D, the exhaust delivers increased drivability. For usage on race tracks that allow less noise than FIM sound limits, the exhaust system will be delivered with removable muffler inserts. We recommend for race track use the outer clutch hub 69132001044! The exhaust system can be mounted only in combination with the 690.05.907.100 headers.

691.05.999.000

691.05.283.100

RC8 R 09 –10

TiTAniUM SiLEnCER EVO 4

693.05.999.000 RC8 R

CLUB RACE KiT The Club Race Kit is the perfect choice for ambitious visitors to race track training sessions, but also for RC8R competitors in a range of amateur racing series. The use of a specially developed, high-quality Akrapovic EVO4 sports exhaust system together with an amended cylinder head gasket, specially tuned valve timing as well as the use of an altered fuel injection mapping all result in a significant increase in performance. Because this adaptation involves only a few changes and the construction of the engine is very well thought out, any official KTM RC8 dealer is able to make the Club Kit adaptations in just a few hours. Includes the Akrapovic EVO 4 exhaust system.

691.05.907.000 TiTAniUM hEADER EVO 4 RC8 R Specifically designed to be matched with the RC8-R Club Race kit, Superbike and Superstock engine kit. Should not be used without one of this 3 Tuning Kits and special Mapping.

RC8 Âť

FiBERGLASS pARTS An absolute "must have" for every ambitious racer! The fiberglass fairing meets with the FIM requirements for Superstock. What this means to you; Paint the fairing as you like, attach it with the quarter turn pins and hit the track. Fiberglass fairing needs mounting kit for control box and voltage regulator 69012034044. For proper mounting you also need to order 14 pieces quick closure 69008901050 and 14 pieces receivers 45007040050.

690.08.101.000

690.08.110.000

690.08.102.000

690.08.103.000

FiBERGLASS FROnT FAiRinG

FiBERGLASS FROnT FEnDER

FiBERGLASS LEFT SiDE FAiRinG

FiBERGLASS RiGhT SiDE FAiRinG

690.08.147.000

690.08.160.100

690.08.114.000

FiBERGLASS SEAT FAiRinG

FiBERGLASS UnDER EnGinE FAiRinG

FiBERGLASS REAR FAiRinG

690.08.947.000 FiBERGLASS SEAT FAiRinG wiTh qUiCK CLOSURE

690.08.901.150

450.07.040.050

690.08.147.150

qUiCK CLOSURE

COUnTERpART qUiCK CLOSURE

SEAT COnTACT SURFACE This self-adhesive seat contact surface gives you the perfect contact to your bike. For use with fiberglass seat fairings 69008147000 or 69008947000.

690.12.034.044 RACinG MOUnTinG KiT FOR COnTROL BOX AnD VOLTAGE REGULATOR

RC8 Âť

690.06.915.100 AiR FiLTER RACinG Racing air filter with a higher air flow rate for better performance. Cleanable and reusable for extended service life.

690.10.965.120 ChAin 520 High strength and high efficiency chain, reduces drag. That means increased performance of the bike!

690.33.929.015 690.33.929.016 690.33.929.017

Z15 Z16 Z17

690.05.014.000

690.03.901.023

690.34.931.066

FROnT BRACKET EXhAUST hOLDER Additional weight reduction due to removed horn, and horn-holder.

STEERinG STOppER Protects the steering damper from damage due to extreme handlebar movement. Fits all RC8 models from VIN VBKVR94068M947878.

REVERSE GEAR ChAnGE KiT

FROnT SpROCKET 520 Only for use with 520 chain.

691.08.908.000

690.10.951.134 690.10.951.135 690.10.951.137 690.10.951.138 690.10.951.139 690.10.951.140 690.10.951.141 690.10.951.142

600.05.022.244

690.11.046.044

690.11.046.144

690.13.930.000

SLS REMOVAL KiT Mounting only possible on Akrapovic exhaust system 69005283000 or 69005283100 and use of special Akrapovic Mapping!

SiDESTAnD REMOVAL KiT For quick sidestand removal. Leave the support on the bike and plug in the adapter for the sidestand sensor.

SiDESTAnD REMOVAL KiT Completely remove the side stand and stock support, and mount the lightweight shifting shaft support. Weight reduction plus a real race appearance.

FROnT BRAKE pADS Brake performance on a real FIM Superbike level. These pads provide consistent feel for use on high speed tracks with higher braking demands. Works perfect with stock brakediscs and also with the wave-style discs 61109960000. For race use only!

Z34 Z35 Z37 Z38 Z39 Z40 Z41 Z42

REAR SpROCKET 520 Made of high-strength aluminum. Only for use with 520 chain.

RACinG winDShiELD Clear windshield with special shape, directly derived from IDM factory racing team!

RC8 »

690.34.080.000 qUiCKShiFTER The perfect solution for quick up shifting without using the clutch! An electronic sensor, recognizes when you push the shift lever. Then, it interrupts the ignition for a fraction of a second, which allows a drag free up-shifting without using the clutch and without closing the throttle. Is also useable with our reverse gear change kit 690.34.931.066. Needs mounting kit 690.34.081.044.

691.30.986.044 RC8 RC8 R

08 – 10 09 – 11

CARBOn CLUTCh COVER pROTECTOR 691.30.985.044 RC8 RC8 R

08 – 10 09 – 10

693.30.985.044 RC8 R

CARBOn EnGinE pROTECTOR LEFT A must for FIM compliance in superstock racing, also protects your engine on the street in case of a fall.

690.07.908.000 RACinG FUEL CAp Fuel like the pro's do! Keyless and extremely quick.

U690.9852 TiRE wARMERS Temperature Adjustable with Solid State Micro-Processor and Digital Display. See actual tire temperature while the warmer runs. Most accurate available on the market. Temperature set point is changed with the push of a button - range up to 212 degrees F. Use higher temps to get ready to hit the track & lower temps for saving Heat Cycles in between track sessions. Safely heat rain tires and different compounds. Soft carrying tote from Ogio. Foam filled hard case for the digital controllers.

RC8 Âť

690.13.950.044

690.13.950.045

690.34.931.044

ARTiCULATED BRAKE LEVER KiT Lightweight racing lever designed to bend away in case of a spill. Fully adjustable.

BRAKE LEVER ADJUSTER whEEL For use with 690.13.950.044

ARTiCULATED CLUTCh LEVER KiT Lightweight racing lever designed to bend away in case of a spill. Fully adjustable.

690.03.937.144

750.38.041.100

690.08.926.050

ADJUSTABLE FOOTpEG KiT The CNC machined foot pegs are made of high-strength aluminum. They are adjustable in 9-positions. That makes it easy to find the perfect position on the bike. Heel guard is not included. We recommend the carbon heel guards 6900396605049 and 6900396505049.

OiL FiLTER CAp CNC machined design made of highstrength aluminum, orange anodized.

qUiCK LOCK COVER

690.08.915.033

690.07.011.000

nUMBERpLATE hOLDER KiT Shorter version for a cleaner look. Includes LED blinkers.

TAnK pAD

772.30.002.060 / 04

690.07.909.000

FACTORY iGniTiOn COVER pLUG

TAnK CAp STiCKER

RC8 Âť

691.32.900.000

612.30.026.100

690.03.945.000

610.13.009.100

690.04.030.090

CLUTCh COVER CNC-machined version made of high-strength aluminum.

CRASh BOBBinS FROnT Will protect your forks in the event of a crash.

CnC BRAKE-FLUiD RESERVOiR CAp CNC-machined version made of high-strength aluminum.

SwinGARM STiCKER SET Avoids scratches to the swingarms!

AnTi-hOppinG CLUTCh RC8 R This anti-hopping clutch is a must for every ambitious rider. This racing clutch helps avoid rear wheel chatter by allowing the clutch to "slip" during downshifts and deceleration. This allows for better traction, wheel stability, and higher corner entry speeds. It also puts less fatigue on the drive train. This clutch is developed for race track use.

690.32.900.000 AnTi-hOppinG CLUTCh RC8 Same as 691.32.900.000 with softer clutch springs.

610.02.055.060

610.03.046.200

690.13.962.000

CnC CLUTCh RESERVOiR COVER CNC-machined version made of high-strength aluminum.

CRASh BOBBinS REAR Will protect your swingarm in the event of a crash.

CnC REAR BRAKE CYLinDER COVER CNC-machined version made of high-strength aluminum.

RC8 Âť

690.10.060.100 wAVE-TYpE BRAKE DiSC REAR Optimized in visual appearance and function. This floating wave disc features clear feedback without any loss of brake performance even under heavy conditions.

611.09.960.000

690.09.001.044 FROnT

3,5" x 17"

690.10.001.044 REAR

6" x 17"

MARChESini ALUMinUM whEEL Forged Rims, directly descended from racing. Due to a special developed multi-directional forging process, and detailed force vector analysis, these wheels offer a maximum weight reduction and very high rigidity values, for ideal transfer of brake and acceleration forces. Weight of wheel set app. 8.6 kg.

wAVE-TYpE BRAKE DiSC 320 MM Stainless floating disc with anodized orange center provides consistent brake performance under extreme conditions. Even at the highest temperatures the outer disc does not bend or warp due to the advanced design and race proven materials. The alloy center is lighter than original rotors and is race track approved. Specially designed for the KTM superbikes this rotor is a great combination of improved performance and visual appeal.

RC8 »

620.10.965.118 ChAin BLACK SCALE 525 The Black Scale chain by RK is a performance chain that combines great technical features with an exclusive appeal coming from its black hard coated plates with brassed pins and rollers. 118 link.

780.13.920.000 BRAKE BLEEDER SCREw Brake system bleeding made simple. By installing this new bleeder screw with special holding valve, you simply open the screw of the return-valve a half turn and pump the brake fluid through the brake system. The special holding valve prevents air getting sucked back into the system. The result: you don't need to have a second person to pump or open and close the bleeder screw. Changing the brake fluid or bleeding the system is done in seconds. Comes with anodized mud cap. For the front brake caliper.

611.09.099.000 611.09.099.000 / 20

626.09.099.000 RiM STiCKER “TATTOO” Only for wheels with 5-spokes design!

RiM STiCKER SET Ready cut sticker for adding on front and rear rim.

620.14.949.000 ADApTiVE BRAKELiGhT Add increased visibility on the road. In the event of hard braking, the control unit pulses the rear brake light, alerting traffic behind you.

611.10.051.037 / 04 611.10.051.038 / 04 611.10.051.040 / 04 611.10.051.041 / 04

Z37 Z38 Z40 Z41

SpROCKET If you think a steel sprocket is too heavy and an aluminum sprocket wears out too quickly then we have the perfect sprocket for you! A steel outer chain ring combined with an inner aluminum carrier combines the best of both worlds to create a light weight, long lasting sprocket. This not only increases rear sprocket life but also the front sprocket and chain life for up to 3 times compared to normal sprockets. If you are looking for the highest quality sprocket available and one that matches the image of your KTM your search is over!

RC8 »

37 601.12.178.000 ZippER LOCK Avoids thieves' quick entry to your luggage! For use on 69012078000 and 69012019000.

690.12.007.000 pROTECTiVE COVER inDOOR No chance for dust or unwanted scratches etc to damage your bike, thanks to the KTM indoor bike cover which makes your RC8 an eye-catcher in the garage as well. The cover is made from a special fabric with a distinctive structure that does not allow dust or condensation to pass through. The inner-side has a soft lining.

601.12.035.000 ALARM SYSTEM Plug and Play fail safe single circuit immobilization. Water and vibration resistant resin bonded construction. Integral movement sensor. Storage box is also secured. 2 x waterproof anti-scan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life). 69012035044 necessary for mounting.

690.12.035.044 ALARM SYSTEM MOUnTinG KiT

610.12.032.000

690.12.078.000

690.12.019.000

RC8 RC8 R

REAR BAG The useful rear bag follows in form and layout the rear of the RC8. A specific feature is that you don't need any carrier system for mounting. Advantage: No tricky mounting of brackets which destroys the nice design of the RC8 rear.You only have to click in the bag instead of the rear seat. Small items like cell phone, wallets, keys, etc. are kept perfectly. When the rear bag is mounted the bike can be used only as a single seater. Capacity app. 10 Liters.

TAnK BAG This specially developed tank bag fits perfect to the chiseled image of the RC8. To keep this form at high-speed, we construct the bag using hi tech materials and techniques. The novel combination of inherently stable foam and textile fibers results in a rigid form with a soft appearance. The included map holder is mounted in seconds. Includes rain cover.

08 – 10 09 – 11

RADiAL ROADLOK ® The patented technology powering each RoadLoK® powersport locking system provides 100% safe antitheft locking security due to the system's permanently-mounted lock body--which literally becomes a part of the vehicle's frame. The frame-mounted solution eliminates movement completely while the system is engaged--the very movement which makes disc locks, padlocks, and chains so very dangerous if the rider forgets to remove those devices before attempting to ride off. Additionally, the removable BrakeBoltT pin, which keeps the bike locked right where the rider parks the vehicle, guarantees that the system will never accidentally lock while the rider is operating the vehicle. Does not fit with Wave Brake Disc 61109960000.

611.05.099.300

990 super duke

990 SUpER DUKE »

600.30.085.000

611.08.110.000 / 49

07 – 10

CARBOn iGniTiOn COVER pROTECTiOn Effective protection against stones, made from Carbon Kevlar.

50% weight reduction.

CARBOn FROnT FEnDER

610.08.014.000 / 49 07 – 10 CARBOn ChAinGUARD AnD hUGGER Finest carbon for a very elegant appearance and a weight reduction.

600.30.086.000 07 – 10 CARBOn CLUTCh COVER pROTECTiOn Effective protection against stones, made from Carbon Kevlar.

990 SUpER DUKE »

610.03.095.000 / 49

600.06.003.002/ 49

610.06.003.002/ 49

07–10

CARBOn FOOTREST pROTECTiOn SET

CARBOn AiRBOX COVER LEFT

CARBOn AiRBOX COVER RiGhT

610.08.019.000 / 49 07–10 CARBOn COVER FOR REAR pART Finest carbon for a very elegant appearance and a weight reduction. Not useable for R-Versions.

610.07.040.020 / 49 07–10 610.05.099.007

600.30.060.000 / 49

FOR 610.05.099.000

07–10

CARBOn hEAT pROTECTOR

CARBOn FROnT ChAinGUARD 32 % weight reduction.

CARBOn SEAT COVER Not useable for R-Version.

990 SUpER DUKE »

610.05.007.200 07 – 10 EVOLUTiOn TiTAniUM hEADERS 610.05.007.300 610.05.099.000

610.05.099.200

07–10

07 – 10

SLip-On TiTAniUM SiLEnCER SET Your motor’s potential will be awakened; the designs for this system come from the same department that designs the racing versions of Akrapovic exhaust systems. In addition, due to the use of high-tech materials, you will save weight and improve the overall characteristics of your bike. 55% weight reduction . Removable noise reduction insert. Special mapping from a KTM Street dealer is required for proper performance. For closed course use only.

SLip-On TiTAniUM SiLEnCER SET The Akrapovic carbon tipped SLIP-ON system is a starting-level tuning component. It is an excellent combination of price, performance, top-quality materials and production quality. Mounting only possible with original headers. Approx. 9 kg less weight and more performance. Special mapping from a KTM dealer is required for proper performance. For closed course use only.

07 – 10 RACinG STAinLESS STEEL hEADERS 610.05.099.300 07 – 10 EVOLUTiOn TiTAniUM SiLEnCER SET The Akrapovic Racing and Evolution exhaust systems are designed for all those who just want to squeeze that little bit more out of their Super Duke. The complete system delivers an improved torque curve to the back wheel and saves a lot of weight, improving handling not to mention the sharp appearance. The design of the muffler for the Akrapovic Racing and Evolution systems fits exceptionally well to the aggressive naked bike look. Not useable for 990 Superduke R 08-09. For closed course use only.

990 SUpER DUKE »

610.11.046.044

610.02.044.100

503.13.005.000

07–10

SiDE STAnD DiSASSEMBLY KiT For quick sidestand removal. Leave the support on the bike and plug in the adapter for the sidestand sensor.

CLAMp CLUTCh CYLinDER Without mirror support.

CLAMp BRAKE CYLinDER Without mirror support.

620.12.940.050 07–10 600.30.126.200

772.30.002.060 / 04

07–10

CnC CLUTCh COVER High quality CNC-machined outer clutch cover with factory look. Made of high-strength aluminum.

FACTORY iGniTiOn COVER pLUG

REAR ViEw MiRROR EXTEnSiOn If you want to improve your rear view, this is the solution for you. Mounts betweens the stock mirrors and adapters.

990 SUpER DUKE »

610.03.045.200

610.04.037.050

610.13.009.100

07–10

CRASh BOBBinS FROnT Will protect your forks in the event of a crash.

SwinGARM BOLT COVER SET

CnC BRAKE-FLUiD RESERVOiR CAp CNC-machined version made of high-strength aluminum.

610.03.046.200

613.03.946.044

610.02.055.060

07–10

CRASh BOBBinS REAR Will protect your swingarm in the event of a crash.

CRAShpAD FOOTpEG Crashpads to be mounted on the passenger footpeg.

CnC CLUTCh RESERVOiR COVER CNC-machined version made of high-strength aluminum.

990 SUpER DUKE »

U691.0017

611.32.000.100

07–10

ThROTTLE CAM SYSTEM Precision machined aluminum throttle tube with delrin inserts for smooth throttle action. Includes three updated cam profiles designed to give different throttle response with fuel injected bikes.

AnTi-hOppinG CLUTCh This anti-hopping clutch is a must for every ambitious rider. This racing clutch helps avoid rear wheel chatter by allowing the clutch to "slip" during downshifts and deceleration. This allows for better traction, wheel stability, and higher corner entry speeds. It also puts less fatigue on the drive train. This clutch is developed for race track use.

611.01.134.029 / 30

1618.0D03

07 – 10

07–10

CnC TOp TRipLE CLAMp For mounting of the handlebar you also need the handlebar support 6110103904430. Using the top triple clamp 61101134029/30 needs 2 pcs. bushing 61101035000 and 2 pcs. screw 61111064000 for mounting the starter lock.

STEERinG DAMpER From model year 07 you need mounting kit 611.12.005.144 .

611.12.005.144 07 – 10 MOUnTinG KiT FOR STEERinG DAMpER

611.07.908.000

690.13.950.044

690.34.931.044

07–10

RACinG FUEL CAp Fuel like the pro's do! Keyless and extremely quick.

ARTiCULATED BRAKE LEVER KiT Light weight racing lever designed to bend away in case of a spill.

ARTiCULATED CLUTCh LEVER KiT Light weight racing lever designed to bend away in case of a spill.

611.03.038.044 07–10

610.34.030.100 07–10 REVERSE GEAR ChAnGE KiT

ADJUSTABLE FOOTpEG KiT These CNC machined foot pegs are made of highstrength aluminum. They feature replaceable components and allow for 6 position adjustments.

990 SUpER DUKE »

Brake Bleeder screw – Fast bleeding – Easy handling – premium materials

611.09.099.000 611.09.099.000 / 20 RiM STiCKER SET Ready cut sticker for adding on front and rear rim.

626.09.099.000 RiM STiCKER “TATTOO” Only for wheels with 5-spokes design!

611.09.960.000 07–10 wAVE BRAKE DiSC 320 MM Stainless floating disc with anodized orange center provides consistent brake performance under extreme conditions. Even at the highest temperatures the outer disc does not bend or warp due to the advanced design and race proven materials. The alloy center is lighter than original rotors and is race track approved. Specially designed for the KTM superbikes this rotor is a great combination of improved performance and visual appeal.

770.13.920.000

770.13.920.100

07–10

BRAKE BLEEDER SCREw

BAnJO BOLT wiTh BLEEDER FUnCTiOn

Brake system bleeding made simple. By installing this new bleeder screw with special holding valve, you simply open the screw of the return-valve a half turn and pump the brake fluid through the brake system. The special holding valve prevents air getting sucked back into the system. The result: you don't need to have a second person to pump or open and close the bleeder screw. Changing the brake fluid or bleeding the system is done in seconds. Comes with anodized mud cap. 77013920000 for rear brake caliper 07-10. 77013920100 for front brake caliper 07-10.

611.10.051.037 / 04 611.10.051.038 / 04 611.10.051.040 / 04 611.10.051.041 / 04

620.10.965.118 ChAin BLACK SCALE 525 The Black Scale chain by RK is a performance chain that combines great technical features with an excusive appeal coming from its black hard coated plates with brassed pins and rollers. 118 length.

Z37 Z38 Z40 Z41

SpROCKET If you think a steel sprocket is too heavy and an aluminum sprocket wears out too quickly then we have the perfect sprocket for you! A steel outer chain ring combined with an inner aluminum carrier combines the best of both worlds to create a light weight long lasting sprocket. This not only increases rear sprocket life but also the front sprocket and chain life for up to 3 times compared to normal sprockets. If you are looking for the highest quality sprocket available and one that matches the image of your KTM your search is over!

990 SUpER DUKE »

610.07.011.100 07–10 TAnKpAD

690.09.001.044 07–10 FROnT

3,5" x 17"

611.10.801.044 07–10 REAR

U690.9852

5,5" x 17"

MARChESini ALUMinUM whEELS Forged Rims, directly descended from racing. Due to a special developed multidirectional forging process, and detailed force vector analysis, these wheels offer a maximum weight reduction and very high rigidity values, for ideal transfer of brake and acceleration forces. Weight of wheel set app. 8.6 kg.

611.07.909.000 07–10 TAnK CAp STiCKER

TiRE wARMERS Temperature Adjustable with Solid State Micro-Processor and Digital Display. See actual tire temperature while the warmer runs. Most accurate available on the market. Temperature set point is changed with the push of a button - range up to 212 degrees F. Use higher temps to get ready to hit the track & lower temps for saving Heat Cycles in between track sessions. Safely heat rain tires and different compounds. Soft carrying tote from Ogio. Foam filled hard case for the digital controllers.

990 SUpER DUKE »

611.12.035.044

620.02.903.050

07–10

ALARM SYSTEM MOUnTinG KiT

GpS / pDA BAG SMALL Great travel bag to help keep electronics dry and shock secured. Dimensions: 140 x 90 x 35mm.

600.12.035.100 07–10 ALARM SYSTEM Plug and Play Fail safe twin circuit immobilization. Water and vibration resistant resin bonded construction. Integrated microchip movement sensor. Seat secured with Reed switch.v 2x waterproof anti-scan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life).

610.12.032.000

601.12.178.000

610.12.019.000

ZippER LOCK Avoids thieves' quick entry to your luggage! For use on 610.12.019.000.

07 – 10

620.02.903.150

RADiAL ROADLOK ® The patented technology powering each RoadLoK® powersport locking system provides 100% safe anti-theft locking security due to the system's permanently-mounted lock body--which literally becomes a part of the vehicle's frame. The frame-mounted solution eliminates movement completely while the system is engaged--the very movement which makes disc locks, padlocks, and chains so very dangerous if the rider forgets to remove those devices before attempting to ride off. Additionally, the removable BrakeBoltT pin, which keeps the bike locked right where the rider parks the vehicle, guarantees that the system will never accidentally lock while the rider is operating the vehicle. Does not fit with Wave Brake Disc 611.09.960.000.

07–10

TAnK BAG Made with extra tough zippers and abrasionresistant edging of reflex material. Adjustable size main compartment, two smaller compartments, map sleeve. Total capacity: 15 litres. Carrying handle, shoulder strap and rain cover included.

GpS / pDA BAG BiG Dimensions: 170 x 130 x 35 mm.

620.02.903.000 05 – 11 SUppORT FOR GpS / pDA BAGS For mounting on the stock handlebar supports!

990 SUpER DUKE »

610.01.043.018 07–10 hAnDLEBAR RiSER 18 mm.

611.07.940.000 07–10 ERGO SEAT Only for 990 Super Duke R.

620.14.949.000 07–10 ADApTiVE BRAKELiGhT Add increased visibility on the road. In the event of hard braking, the control unit pulses the rear brake light alerting traffic behind you.

611.08.065.100 07 – 11 TOURinG winDSCREEn We recommend the touring windscreen for longer trips.

610.07.040.100 / 30 07–10 ERGO SEAT The gel insert will increase the comfort especially on long trips. Not useable for R-Version.

611.32.000.100

950 / 990 supermoto

950 / 990 SUpERMOTO »

611.08.110.000 / 49 990 SM T

10 – 11

CARBOn FROnT FEnDER 50 % weight reduction.

600.30.086.000

600.30.085.000

600.30.060.000 / 49

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

CARBOn CLUTCh COVER pROTECTOR Effective protection against stones; made from Carbon Kevlar.

CARBOn iGniTiOn COVER pROTECTOR Effective protection against stones; made from Carbon Kevlar.

CARBOn FROnT ChAinGUARD 32 % weight reduction.

610.08.014.000 / 49

625.08.050.000 / 49 LEFT 950 SM

06 – 07

625.08.051.000 / 49

586.08.001.000 / 49

625.01.094.000 / 49

950 SM

950 SM 990 SM R

06–07

CARBOn hEADLiGhT MASK Finest carbon for an elegant appearance and reduced weight.

06 – 07 10 – 11

CARBOn SpLASh pROTECTiOn Finest carbon for an elegant appearance and reduced weight.

RiGhT 950 SM

06 – 07

CARBOn SpOiLER Finest carbon for an elegant appearance and reduced weight. Not for use on R models.

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11 CARBOn ChAinGUARD AnD hUGGER Finest carbon for an elegant appearance and reduced weight.

950 / 990 SUpERMOTO »

600.05.099.300 950 SM 990 SM R

06 – 07 10 – 11

FMF STAinLESS STEEL SiLEnCER SET These stainless steel slip-on silencers offer a great price performance ratio. The use of high quality INOX stainless steel means that these silencers are built to last. Total weight of both silencers together is 9.8 lbs. Over 50% lighter than the stock silencers. They also feature removable spark arrestor inserts. For closed course use only.

625.05.099.000

626.05.099.200 950 SM 990 SM R

620.05.099.000 990 SM T

10 – 11

TiTAniUM SiLEnCER SET 59% lighter, slip-on silencer set increases performance compared to the production exhaust. Optional muffler inserts can be removed for sports riding. Special mapping from an authorized KTM Street dealer required for proper performance. For closed course use only.

06 – 07 10 – 11

TiTAniUM SiLEnCER SET The Akrapovic SLIP-ON system is a starting-level tuning component . It is an excellent combination of price, performance, top-quality materials and production quality. Mounting only possible with original headers. Approx. 9 kg less weight and more performance. Special mapping from an authorized KTM Street dealer required for proper performance. For closed course use only.

950 SM 990 SM R

06 – 07 10 – 11

TiTAniUM SiLEnCER SET 59% lighter, slip-on silencer increases performance compared to the stock silencers. Muffler inserts can be removed for sports riding. Special mapping from an authorized KTM Street dealer required for proper performance. For closed course use only.

950 / 990 SUpERMOTO »

626.05.007.100 950 SM 990 SM T 990 SM R

06 – 07 10 – 11 10 – 11

EVOLUTiOn TiTAniUM hEADER 626.05.007.200 950 SM 990 SM T 990 SM R

06 – 07 10 – 11 10 – 11

RACinG STAinLESS STEEL hEADER

620.05.099.200 990 SM T

10 – 11

EVOLUTiOn TiTAniUM SiLEnCER SET

625.05.099.300 950 SM 990 SM R

06 – 07 10 – 11

EVOLUTiOn TiTAniUM SiLEnCER SET

The Akrapovic Racing and Evolution exhaust systems are designed for all those who just want to squeeze that little bit more out of their Supermoto. The complete system delivers an improved torque curve to the back wheel and saves a lot of weight, improving handling not to mention the sharp appearance. The design of the muffler for the Akrapovic Racing and Evolution systems fits exceptionally well to the aggressive supermoto look. The exhaust is configured as a 2-1-2 system, with two conical header tubes leading into a Y collector, then into a cylindrical Y link pipe and finally onto the two mufflers. The difference between the Racing and the Evolution mufflers is in the materials used. The Racing system uses high quality stainless steel, while the Evolution uses a special type of titanium The performance characteristics of the two systems are identical. The individual components are connected with sleeve joints secured with silicon-shielded springs. For the KTM Supermoto we fitted the new design Akrapovic mufflers, which are attached to the frame using Akrapovic carbon-fiber clamps. The muffler outer sleeves are titanium, as are the perforated inner tube, inlet cap and outlet tube. The outlet tube is formed using the hydroforming process accurate to the last millimeter. The outlet cap for the Supermoto is made of carbon. The result is impressive 9 kg less weight and significantly more performance. Special mapping from an authorized KTM Street dealer required for proper performance. For closed course use only.

950 / 990 SUpERMOTO »

611.32.000.100 SXS.05.450.220

610.04.037.050

772.30.002.060 / 04

990 SM T 990 SM R

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

950 SM 990 SM T 990 SM R

SwinGARM BOLT COVER SET

FACTORY iGniTiOn COVER pLUG

10 – 11 10 – 11

SXS.05.450.230 950 SM

06 – 07

06 – 07 10 – 11 10 – 11

CnC hYDRAULiC CLUTCh COVER CNC-machined version made of high-strength aluminum.

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11 AnTi-hOppinG CLUTCh This anti-hopping clutch is a must for every ambitious rider. This racing clutch helps avoid rear wheel chatter by allowing the clutch to "slip" during downshifts and deceleration. This allows for better traction, wheel stability, and higher corner entry speeds. It also puts less fatigue on the drive train. This clutch is developed for race track use.

780.13.920.000 990 SM R 10 – 11 BRAKE BLEEDER SCREw

770.13.920.100 950 SM 06 – 07 990 SM T 10 – 11

U691.0017 610.13.009.100

600.30.126.200

600.13.059.200

950 SM 990 SM T 990 SM R

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

950 SM 990 SM T 990 SM R

CnC CLUTCh COVER High-quality, CNC-machined outer clutch cover with factory look. Made of high-strength aluminum.

CnC MAin BRAKE CYLinDER COVER CNC-machined version made of high-strength aluminum.

06 – 07 10 – 11 10 – 11

CnC BRAKE-FLUiD RESERVOiR COVER CNC-machined version made of high-strength aluminum.

06 – 07 10 – 11 10 – 11

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11 ThROTTLE CAM SYSTEM Precision machined aluminum throttle tube with delrin inserts for smooth throttle action. Includes three updated cam profiles designed to give different throttle response with fuel injected bikes.

BAnJO BOLT wiTh BLEEDER FUnCTiOn Brake system bleeding made simple. By installing this new bleeder screw with special holding valve, you simply open the screw of the return-valve a half turn and pump the brake fluid through the brake system. The special holding valve prevents air getting sucked back into the system. The result: you don't need to have a second person to pump or open and close the bleeder screw. Changing the brake fluid or bleeding the system is done in seconds. Comes with anodized mud cap. 77013920100 for front brake caliper 05-10. 78013920000 for front brake caliper 990 SM-R 09-11.

950 / 990 SUpERMOTO »

611.10.051.038 / 04 611.10.051.040 / 04 611.10.051.041 / 04

Z38 Z40 Z41

SpROCKET If you think a steel sprocket is too heavy and an aluminum sprocket wears out too quickly then we have the perfect sprocket for you! A steel outer chain ring combined with an inner aluminum carrier combines the best of both worlds to create a light weight long lasting sprocket. This not only increases rear sprocket life but also the front sprocket and chain life for up to 3 times compared to normal sprockets. If you are looking for the highest quality sprocket available and one that matches the image of your KTM your search is over! 620.12.940.050 950 SM 990 SM T 990 SM R

06 – 07 10 – 11 10 – 11

MiRROR EXTEnSiOn If you want to improve your rear view, this is the solution for you. Mounts betweens the stock mirrors and adapters.

620.10.965.118

Preload adjuster rear shock – Easy adjustability – improved appearance

ChAin BLACK SCALE 525 The Black Scale chain by RK is a performance chain that combines great technical features with an exclusive appeal coming from its black hard coated plates with brassed pins and rollers. 118 link.

620.04.912.000 990 SM T 10 – 11 990 SM R 10 – 11 pRELOAD ADJUSTER REAR ShOCK This shock preload adjuster allows for quick adjustment with just a T-handle wrench. Unlike other preload adjusters this one has a mechanical drive mechnism that allows the use of the entire thread range. Great for adjusting the shock for luggage or two up riding.

950 / 990 SUpERMOTO »

626.09.099.000 RiM STiCKER “TATTOO” Only for wheels with 5-spokes design!

611.09.099.000 611.09.099.000 / 20 RiM STiCKER SET Ready cut sticker for adding on front and rear rim. 690.09.001.044 05 – 11 FROnT

3,5" x 17"

611.10.801.044

630.03.094.044 / 30 630.03.094.044 / 04 950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11 FRAME pROTECTiOn SET

05 – 11 REAR

5,5" x 17"

MARChESini ALUMinUM whEEL Forged Rims, directly descended from racing. Due to a special developed multidirectional forging process, and detailed force vector analysis, these wheels offer a maximum weight reduction and very high rigidity values, for ideal transfer of brake and acceleration forces. Weight of wheel set app. 8.6kg.

950 / 990 SUpERMOTO »

610.12.032.000 990 SM T 990 SM R RADiAL ROADLOK ® The patented technology powering each RoadLoK® powersport locking system provides 100% safe anti-theft locking security due to the system's permanently-mounted lock body--which literally becomes a part of the vehicle's frame. The frame-mounted solution eliminates movement completely while the system is engaged-the very movement which makes disc locks, padlocks, and chains so very dangerous if the rider forgets to remove those devices before attempting to ride off. Additionally, the removable BrakeBoltT pin, which keeps the bike locked right where the rider parks the vehicle, guarantees that the system will never accidentally lock while the rider is operating the vehicle. Does not fit with Wave Brake Disc 611.09.960.000.

610.03.045.200

610.03.046.200

613.03.946.044

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

CRASh BOBBinS FROnT Protects your forks in the event of a crash.

CRASh BOBBinS REAR Protects your swingarm in the event of a crash.

CRAShpAD FOOTpEG Crashpads for mounting on the passenger footpegs.

601.12.035.000 990 SM T 990 SM R

10 – 11 10 – 11

ALARM SYSTEM Plug and Play Fail safe twin circuit immobilization. Water and vibration resistant resin bonded construction. Integral movement sensor. Storage box is also secured. 2 x waterproof anti-scan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life), 62612035044 necessary for mounting. 620.14.949.000

600.12.035.100

625.12.035.044

950 SM 990 SM T 990 SM R

950 SM 06 – 07

ALARM SYSTEM Plug and Play Failsafe twin circuit immobilization. Water and vibration resistant resin bonded construction. Integrated microchip movement sensor. Seat is secured with Reed switch. 2 x waterproof anti-scan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life-span). 625.12.035.044 necessary for mounting.

ALARM SYSTEM MOUnTinG KiT

06 – 07 10 – 11 10 – 11

ADApTiVE BRAKELiGhT Add increased visibility on the road. In the event of hard braking, the control unit pulses the rear brake light alerting traffic behind you.

626.12.035.044 990 SM T 10 – 11 990 SM R 10 – 11 ALARM SYSTEM MOUnTinG KiT

950 / 990 SUpERMOTO »

620.12.068.000 990 SM 08 – 10 990 SM T 09 – 11 990 SM R 09 – 11 TAnK pROTECTiOn Plastic coated tubular steel bars, which securely attach to the frame.

620.03.022.000

620.12.099.044

990 SM R 10 – 11 990 SM T 10 – 11

CEnTER STAnD Lifts your back wheel off the ground for tire changes and maintenance.

EnGinE pROTECTiOn This aluminum engine protection not only looks great, it offers maximum protection against stones and other flying debris.

601.03.923.050 990 SM 08 – 10 990 SM T 09 – 11 990 SM R 09 – 11 STAnD pLATE BiG With this larger stand plate, your bike always stands securely, even on soft ground.

950 / 990 SUpERMOTO »

600.12.027.500

600.12.027.252

600.12.078.100

TOpCASE 37 This top case with a storage capacity of 37 liters makes use of the practical press-lock system for simple opening and closing. The following carrier plates are required for mounting: 950 Supermoto 625.12.027.150; 990 Supermoto 626.12.027.050. No additional carrier plate required for mounting on the 990 SM-T. The top case can be mounted directly on the original installed parts. Size: 49 x 40 x 31 cm.

BACKREST FOR TOpCASE 37 The optional backrest provides passengers more comfort.

REAR BAG Bag with quick-lock system for easy mounting. The volume of the bag can be varied between 12 and 18 liters. The following carrier plates are required for mounting: 950 Supermoto 625.12.027.150; for 990 Supermoto, 626.12.027.050.

750.12.019.100

620.12.025.100

990 SM T

10 – 11

TAnK BAG Compact tank bag with enough capacity for longer trips. The new closures guarantee it fits perfectly on the bike without restricting your movement. Two outer pockets take small items like cell phones, wallet, keys etc. The included map pocket makes child's play of navigation. Includes carry handle and waterproof innerbag. Finished with extra robust zipper closures. Total volume approx. 22 liters.

10 – 11

SiDE BAGS These side bags were specially designed for the 990 SM-T. They not only follow the layout of the line and color of the bike, but were also specially designed to fit the original carrier. This is a lightweight and very quick mounted luggage solution for the next tour. Includes waterproof inside pockets. With the optional locking kit 620.12.928.000 you can achieve a theft deterring luggage system. Appr. volume 2 x 13L.

600.12.027.600

600.12.027.352

625.12.027.150

626.12.019.100

756.12.978.000

TOpCASE 46 This top case with a storage capacity of 46 liters easily holds two full-face helmets. It features the latest generation of snap-shut locking mechanism. The case boasts an extremely elegant design with great personality. The following carrier plates are required for mounting: 950 Supermoto 625.12.027.150; 990 Supermoto 626.12.027.050. No additional carrier plate required for mounting on the 990 SM-T. The top case can be mounted directly on the original installed parts. Size: 58 x 42 x 31 cm.

BACKREST FOR TOpCASE 46 The optional backrest provides passengers more comfort.

950 SM

990 SM R 10 – 11

UniVERSAL REAR BAG / BACKpACK This new designed bag can be used as rear bag on the carrier plate of the bike, or as a backpack. By using the circular zip, the volume can be increased very simply. The bag offers a raincover, an additional storage room for small items and rubber straps on the top to fix a jacket, gloves, etc.

06 – 07

626.12.027.050 990 SM R

10 – 11

CARRiER pLATE FOR TOpCASE For Top case 37, 46 and rear bag 600.12.078.000 or 600.12.078.100.

TAnK BAG Made with extra tough zippers and fitted with abrasion-resistant material at the edges. Main compartment plus one smaller compartment, removable map sleeve. Easy mounting system. Total capacity 12 liters. Handle and rain cover included.

950 / 990 SUpERMOTO »

625.12.019.200

625.12.020.000

950 SM 06 – 07 990 SM T 09 – 11

950 SM

TAnK BAG Made with extra tough zippers and is fitted with abrasion-resistant material at the edges. Generous adjustments possible to main compartment; four smaller compartments, removable map sleeve. Easy mounting system. Total capacity 18 liters. Handle, shoulder strap and rain cover included.

990 SM R 10 – 11

06 –07

626.12.020.000

CARRiER SYSTEM Rigid steel tubular construction . Simple installation without any modification to the passenger foot pegs; perfect load distribution on the existing mounting points on the chassis.

620.12.092.044

620.02.903.000

SUppORT FOR GpS BRACKET Universal application possibilities for mounting the GPS holder.

SUppORT FOR GpS / pDA BAGS For mounting on the stock handlebar supports!

626.12.020.050 990 SM R

10 – 11

SiDE BAGS / CARRiER KiT Use the specially designed SM-T side bags, and the nearly invisible SM-T original carrier for your 990 SM/SM-R, from MY09 on. Kit includes side bags, carrier system and all necessary mounting material with mounting manual.

625.12.025.000 SiDE BAGS High quality robust saddlebags for long trips; includes interior rain protector. 62512020000 or 62612020000 is necessary for correct mounting. Volume appr. 18 Liters.

601.12.078.000

601.12.978.044

620.02.903.050

620.02.903.150

ROLLBAG Completely water proof duffle bag that can be rolled up for flexible volume. Includes attachment straps and shoulder strap. Great for keeping clothes and camping equipment dry!

950 SM 990 SM 990 SM T 990 SM R

GpS / pDA BAG SMALL Great travel bag to help keep electronics dry and shock secured. Dimensions: 140 x 90 x 35mm

GpS / pDA BAG LARGE Dimensions: 170 x 130 x 35 mm.

05 – 08 08 – 10 09 – 11 09 – 11

EXTEnDED CARRiER pLATE Ideal for transporting your luggage bag. Cannot be used for mounting a Topcase.

Important notice: If you use already an Akrapovic Exhaust you need: - Evolution (62505099300, 62605099300): mounting kit 62005099010 - Slip-on (62605099000, 62605099200): mounting kit 62005099010 and Y-pipe 62005099050 If you plan to buy an Akrapovic Exhaust after you have mounted the Carrier kit, please order one of the Exhaust system for SM-T. Carrier Kit can not be combined with the Slip-on 62505099000! Can be used on bikes with VIN higher than VBKVS94009M960440!

950 / 990 SUpERMOTO »

601.12.178.000 ZippER LOCK Avoids thieves' quick entry to your luggage! For use on 62612019000, 62612019100, 60012078000, 60012078100, 62012025100, 62512019200, 60112078000, 62512025000 and 75012019100.

Quicklock carrier system – quick mounting and dismounting – Luggage rack is blended into the stock appearance – Lockable

620.11.042.044 600.12.025.100 / 30 ADVEnTURE CASE SET Two, absolutely water-proof, practically indestructible top-loading side bags (left and right), with 2 integrated 3-liter water containers. Fits the Adventure luggage rack system (not included). Double-wall plastic construction throughout, with robust metal locks on the tops and sides. Capacity: approx. 2x32 liters; 48x27x36 cm. Inside pocket : 600.12.025.060

990 SM T 10 – 11 OUTLET KiT Necessary when a source of power is needed for a navigation system or for any other use.

620.12.020.100 990 SM T 990 SM R

10 – 11 10 – 11

qUiCKLOCK CARRiER SYSTEM / ADVEnTURE CASE 620.12.020.200

601.12.920.000

990 SM T 990 SM R

LOCK FOR qUiCKLOCK CARRiER SYSTEM Locks your Quicklock carrier system on your bike.

10 – 11 10 – 11

qUiCKLOCK CARRiER SYSTEM / BLACK ALU CASE This kit contains the quicklock carrier system (which stays on the bike) and the adapters for our KTM Adventure cases. With the adapters removed the carrier system is almost invisible. Cases not included.

600.12.025.090 FOR 600.12.025.100 / 30 LUGGAGE hOOK SET

950 / 990 SUpERMOTO Âť

601.12.024.200

601.12.024.060

BLACK ALUMinUM CASE LEFT

SiDECASE CARRiER BELT Adding this belts to your side cases, you can easily take them with you in the hotel room or your tent.

601.12.025.200 BLACK ALUMinUM CASE RiGhT These new style travel cases are made of two ultra strong materials. The sidewalls are made of high strength aluminum and the corners are made of impact-resistant plastic parts. The components are vary durable and waterproof bonded by a specially developed riveting technology! Volume of each case is app. 37 L. To secure your luggage an additional lock kit 60112023050 (includes 4 locks for both cases) is available. To secure side cases and top case, please order the lock kit 60112023150 (includes 6 locks). Optional inside pockets available: 60112024070.

601.12.027.000 BLACK ALUMinUM TOp CASE 38L volume. Optional inide pockets available: 601.12.027.070

950 / 990 SUpERMOTO »

87 626.08.050.000 / 20A 990 SM T 10 – 11 SpOiLER whiTE LEFT 626.08.051.000 / 20A 990 SM T 10 – 11 SpOiLER whiTE RiGhT Note: The white of the PowerParts spoiler is not identical to the white of the 2011 white SM T!

625.07.040.100 / 30 950 SM 06 – 07 ERGO SEAT Gel insert increases comfort especially on long trips. Not useable for R-Version.

620.08.965.000 990 SM T 10 – 11 TOURinG winDSCREEn We recommend the touring windscreen for longer trips. 620.07.040.100 990 SM T 10 – 11 990 SM R 10 – 11 ERGO SEAT

626.08.065.000 990 SM R 10 – 11 TOURinG-winDSCREEn We recommend the touring windscreen for longer trips.

602.12.092.060 990 SM T 10 – 11 UniVERSAL pLUG Necessary for the modification of the power supply cable of the navigation system to be able to fit with the socket 620.11.042.044.

601.12.025.200

950 / 990 adventure

950 / 990 ADVEnTURE »

600.30.086.000

600.30.085.000

03 – 11

CARBOn CLUTCh COVER pROTECTOR Effective protection against stones, Made from Carbon-Kevlar.

CARBOn iGniTiOn COVER pROTECTOR Effective protection against stones, Made from Carbon-Kevlar.

600.07.213.050

600.30.060.000 / 49

03 – 05

03 – 11

CARBOn TAnK pROTECTOR Super light Carbon / Kevlar protection.

CARBOn FROnT ChAin GUARD 32% weight reduction.

950 / 990 ADVEnTURE »

601.05.099.000 03 – 11 TiTAniUM SiLEnCER SET Save weight, add more torque and a pleasant exhaust note to your Adventure with this carbon tipped slip-on silencer set. Includes removable sound reduction inserts. For off-road use only.

600.05.099.300

600.05.099.000

03 – 11

TiTAniUM SiLEnCER SET 59% lighter slip-on silencer that will also add power when compared to the series production exhaust. Includes removable sound reduction inserts. For off-road use only.

950 / 990 ADVEnTURE »

600.12.072.000 03 – 11 601.12.035.144 07 – 11

601.03.923.050 03 – 11

TRAnSpAREnT TAnK pROTECTiVE STiCKER SET Help save the paint from scuffs when riding off road.

ALARM SYSTEM MOUnTinG KiT STAnD pLATE BiG With this bigger stand plate, your bike always stands securely, even on soft ground.

620.14.949.000

630.03.094.044 / 30 630.03.094.044 / 04

03 – 11 601.12.035.000 07 – 11 ALARM SYSTEM Plug and Play Failsafe twin circuit immobilization. Water and vibration resistant resin bonded construction. Integral movement sensor. Storage box is also secured. 2 x waterproof antiscan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life), 60112035144 necessary for mounting.

03 – 11

ADApTiVE BRAKELiGhT Add increased visibility on the road. In the event of hard braking, the control unit pulses the rear brake light alerting traffic behind you.

FRAME pROTECTiOn SET

600.12.068.100 03 – 11 CRASh BARS Plastic-coated tubular steel bars, which securely attach to the frame.

950 / 990 ADVEnTURE »

584.01.043.018

600.08.008.100

03 – 11

hAnDLEBAR RiSER 18 mm.

TOURinG winDSCREEn Helps eliminate wind buffeting and protects against fatigue. This taller windscreen is approx. 4 1/2" taller and 4" wider on each side over the stock wind screen.

613.03.946.044

600.07.040.100

03 – 11

CRAShpAD FOOTpEG Crashpads to be mounted on the passenger footpegs.

ERGO SEAT Approx. 20 mm lower seat with gel insert. The gel insert increases comfort, especially on long trips.

U691.0017

601.12.064.044

582.14.069.044

06 – 11

03 – 11

03 – 08

hEATED GRip SET The heating grips, adjustable to two levels ensure you have warm hands even when the weather is bad. Grips have holes for mounting on the hand guards.

TRip-MASTER SwiTCh The switch comes with all necessary add-on parts.

620.12.940.050 03 – 11 MiRROR EXTEnSiOn If you want to improve your rear view, this is the solution for you. Mounts betweens the stock mirrors and adapters.

950 / 990 ADVEnTURE »

600.12.025.090

601.12.929.050

LUGGAGE BRACKET SET FOR 600.12.025.100 AND

03 – 11

600.12.025.100 / 30

BRACKET FOR TOpCASE For top case 601.12.929.000

600.12.027.400 / 30 TOpCASE ADVEnTURE Adventure Top case with an internal volume of 42 liters. For mounting you need also the bracket 600.12.027.450. Backrest 600.12.027.452 and Inside Pocket 600.12.027.453 are optional available.

600.12.025.100 / 30 ADVEnTURE CASE SET Two absolutely waterproof, practically indestructible top-loader side cases (left and right), with integrated 3-liter water container (2 x). Suitable for the Adventure luggage rack system (not included). Double-wall plastic construction all round, with robust metal locks on the top and sides. Volume: approx. 2 x 32 liters; 48 x 27 x 36 cm – matching inside pocket = 600.12.025.060

601.12.929.000 ALUMinUM TOpCASE 38 L Size approx. 31 x 40 x 30 cm. 600.12.020.100

601.12.924.000

03 – 11

ALUMinUM CASE 38 L Durable, water-proof individual bags made of 1.5 mm aluminum without edge welding seams. Rounded constrution with robust plastic protectors on the corners. Can be used on right and left sides. Fits the luggage rack system 600.12.020.100 (not included). Two locking mechanisms with articulation function for the cover, locking eyelets on the top and mounts for additional locks. Capacity: approx. 38 liters; 44 x 24 x 39 cm – Inside Pocket = 600.12.025.060.

CASE CARRiER SYSTEM Rigid steel tubular construction for mounting of all available case sets. Simple installation, without any modification of the passenger foot pegs, perfect load distribution on the existing mounting points on the chassis. 600.12.027.450 BRACKET FOR TOpCASE For top case 600.12.027.400 and 600.12.027.400/30.

950 / 990 ADVEnTURE »

101

601.12.020.100

601.12.024.200

03 – 11

BLACK ALUMinUM CASE LEFT

qUiCKLOCK CARRiER KiT / ADVEnTURE CASE 601.12.020.200 03 – 11 qUiCKLOCK CARRiER KiT / BLACK ALU CASE This kit contains the quicklock carrier system (which stays on the bike) and the adapter for our KTM Adventure cases (which can be removed within seconds from the bike). Cases are not included, please order seperately! With removed adapters you will nearly not recognize that you have mounted a carrier system on your bike for fullsize cases!

601.12.025.200 BLACK ALUMinUM CASE RiGhT These new style travel cases are made of two ultra strong materials. The sidewalls are made of high strength aluminum and the corners are made of impact-resistant plastic parts. The components are vary durable and water-proof bonded by a specially developed riveting technology! Volume of each case is app. 37 L. To secure your luggage an additional lock kit 60112023050 (includes 4 locks for both cases) is available. To secure side cases and top case, please order the lock kit 60112023150 (includes 6 locks). Optional inside pockets available: 60112024070.

601.12.920.000

601.12.024.070

LOCK FOR qUiCK LOCK CARRiERSYSTEM Locks your Quicklock carrier system on your bike.

innER TRAVEL BAG Keep your contents organized with this high quality, multi compartment travel bag. For use with the Black Aluminum Luggage.

601.12.024.060

756.12.978.000

SiDECASE CARRiER BELT Adding these belts to your side cases, you can easily take them with you in the hotel room or your tent.

601.12.027.000 BLACK ALUMinUM TOp CASE 38 L volume. Optional inside pockets available: 601.12.027.070.

950 / 990 ADVEnTURE Âť

103

600.12.027.500 TOpCASE 37 This topcase with an internal volume of 37 liters is using the practical press-lock-system. The bracket 601.12.927.044 is also necessary for correct mounting. Size: 49 x 40 x 31 cm.

600.12.019.100

601.12.078.000

601.12.978.044

03 â&#x20AC;&#x201C; 11

ROLLBAG Completely water proof duffle bag that can be rolled up for flexible volume. Includes attachment straps and shoulder strap. Great for keeping clothes and camping equipment dry!

EXTEnDED CARRiER pLATE Perfect for fixing the roll bag.

TAnK BAG Tank bag for mounting on the tank. Made with extra tough zippers and abrasion-resistant edging of reflex material. Adjustable size main compartment, three smaller compartments, map sleeve. Total capacity: 18 litres. Includes carrying handle, shoulder strap and rain cover.

601.12.927.044 BRACKET FOR TOpCASE For Topcase 37, 46 and rear bag 600.12.078.000, 600.12.078.100 and Topcase 601.12.027.000.

601.12.178.000

600.12.025.060

ZippER LOCK Avoids thieves' quick entry to your luggage! For use on 601.12.078.000, 600.12.078.100, 600.12.019.100 and 600.12.078.000.

inSiDE pOCKET 35 L The clever option to the aluminum suitcase system. Whether you're staying in a tent or a hotel: your luggage is always close at hand.

600.12.027.252 BACKREST FOR TOpCASE 37 Available as an optional extra, offers the passenger more comfort.

600.12.078.100

600.12.027.352

REAR BAG Bag with Quick-Lock System for easy mounting.The volume of the bag is between 12 and 18 liters variable. The bracket 600.12.027.550 is also necessary for correct mounting.

BACKREST FOR TOpCASE 46 Available as an optional extra, offers the passenger more comfort. 600.12.027.600 TOpCASE 46 This topcase with an internal volume of 46 litres is capable of holding two full-face helmets. It features the latest generation snap-shut locking mechanism. It boasts an extremely smart design with great personality. For mounting you also need the bracket 601.12.927.044. Size: 58 x 42 x 31 cm.

950 / 990 ADVEnTURE »

105

601.12.092.050

601.12.092.150

620.12.092.044

601.12.092.080

601.12.092.140

03 – 08

09 – 11

03 – 11

MOUnTinG FOR GpS BRACKET Necessary for mounting the GPS holder.

SUppORT FOR GpS BRACKET Universal application possibilities for mounting the GPS holder.

GpS BRACKET FOR GARMin ZUMO 550 With this elegant lockable construction, your navigation system can be mounted on your motorcycle so that it does not vibrate. As well as the classic fastening on the handlebar cross member (601.12.092.070), which can be used with almost all models, there is a special edition (601.12.092.050 or 601.12.092.150) for the 950/990 Adventure whereby the navigation system is ideally positioned on the bike.

GpS BRACKET FOR TOMTOM RiDER 2 With this elegant lockable construction, your navigation system can be mounted on your motorcycle so that it does not vibrate. As well as the classic fastening on the handlebar cross member (601.12.092.070), which can be used with almost all models, there is a special edition (601.12.092.050 or 601.12.092.150) for the 950/990 Adventure whereby the navigation system is ideally positioned on the bike.

601.29.074.050

601.12.092.180

07 – 11

03 – 11

ChARGinG CABLE Special charging cable for the 990 Adventure. Connect the battery charger 58429074000 and the stock outlet with the charging cable and the starter battery gets charged. Very simple, but ingenious.

GpS BRACKET FOR GARMin ZUMO 660 With this elegant lockable construction, your navigation system can be mounted on your motorcycle so that it does not vibrate. As well as the classic fastening on the handlebar cross member (601.12.092.070), which can be used with almost all models, there is a special edition (601.12.092.050 or 601.12.092.150) for the 950/990 Adventure whereby the navigation system is ideally positioned on the bike.

601.12.092.040

601.11.042.044

03 – 11

03 – 06

GpS BRACKET FOR TOMTOM RiDER With this elegant lockable construction, your navigation system can be mounted on your motorcycle so that it does not vibrate. As well as the classic fastening on the handlebar cross member (601.12.092.070), which can be used with almost all models, there is a special edition (601.12.092.050 or 601.12.092.150) for the 950/990 Adventure whereby the navigation system is ideally positioned on the bike.

OUTLET KiT Necessary for models 03 – 06 when a source of power is needed for a navigation system or for any other use.

950 / 990 ADVEnTURE »

107

601.10.051.042 / 04 601.10.051.045 / 04

602.12.092.060

600.12.073.044

601.12.092.070

03 – 11

03 – 08

03 – 11

UniVERSAL pLUG Necessary for the modification of the power supply cable of the navigation system to be able to fit with the socket 601.11.042.044.

ROADBOOK hOLDER KiT Durable, water-proof mount incl. Handlebar remote control, on-board plug and installation materials. Illuminated road book housing, electrically powered with brake. Road book format: A5, up to 80 pages.

hAnDLEBAR SUppORT FOR GpS BRACKET Universal application possibilities for mounting the GPS holder. Can also be used for other models.

Z42 Z45

SpROCKET If you think a steel sprocket is too heavy and an aluminum sprocket wears out too quickly then we have the perfect sprocket for you! A steel outer chain ring combined with an inner aluminum carrier combines the best of both worlds to create a light weight long lasting sprocket. This not only increases rear sprocket life but also the front sprocket and chain life for up to 3 times compared to normal sprockets. If you are looking for the highest quality sprocket available and one that matches the image of your KTM your search is over!

620.02.903.000

620.02.903.050

620.02.903.150

SUppORT FOR GpS / pDA BAGS For mounting on the stock handlebar supports!

03-11

GpS / pDA BAG SMALL Great travel bag to help keep electronics dry and shock secured. Dimensions: 140 x 90 x 35 mm.

GpS / pDA BAG LARGE Dimensions: 170 x 130 x 35 mm.

950 / 990 ADVEnTURE »

109

SXS.05.450.220

600.30.126.200

600.13.003.100

770.13.920.000

03 – 11

CnC hYDRAULiC CLUTCh COVER CNC-machined version made of high-strength aluminum.

CnC CLUTCh COVER High quality CNC-machined outer clutch cover with factory look. Made of high-strength aluminum.

CnC hAnD BRAKE CYLinDER COVER CNC-machined design made of high-strength aluminum.

BRAKE BLEEDER SCREw Brake system bleeding made simple. By installing this new bleeder screw with special holding valve, you simply open the screw of the return-valve a half turn and pump the brake fluid through the brake system. The special holding valve prevents air getting sucked back into the system. The result: you don't need to have a second person to pump or open and close the bleeder screw. Changing the brake fluid or bleeding the system is done in seconds. Comes with anodized mud cap. 770.13.920.000 for front brake caliper 03-11.

600.13.030.100

610.04.037.050

600.13.059.200

03 – 11

BRAKE pADS FROnT Sintered brake pad with the best price/performance ratio. Will help reduce brake noise. Should be not mounted on bikes with ABS System.

SwinGARM BOLT COVER SET

CnC FOOT BRAKE CYLinDER COVER CNC-machined version made of high-strength aluminum.

780.09.099.000 765.09.099.000 03 – 11

600.35.040.100 03 – 11 ALUMinUM RADiATOR pROTECTOR GRiLL Black-coated aluminum, for better cooling.

RiM STiCKER SET Orange or black colored, ready cut sticker for adding on front and rear rim.

772.30.002.060 / 04 03 – 11 FACTORY iGniTiOn COVER pLUG

690 LC4

584.10.051.048 / 04

111

690 LC4 »

113

756.04.050.000 / 49 DUKE CARBOn hUGGER

756.08.010.000 / 49 DUKE CARBOn FROnT FEnDER

750.30.045.050 / 49

750.30.026.050 / 49

SM / SMC / DUKE / EnDURO

CARBOn iGniTiOn COVER pROTECTiOn

CARBOn CLUTCh COVER pROTECTiOn

690 LC4 Âť

115

765.06.102.000 EnDURO / SMC TUninG-KiT EVO 1 Stage 1 tuning kit containing the open air filter cover. Note: For proper performance the special map must be used. For closed course use only.

765.12.945.000 EnDURO / SMC TUninG KiT EVO 1 COMpLETE Stage 2 kit contains the high performance exhaust system matched with the open air filter cover for solid performance gains. Note: For proper performance the special map must be used. For closed course use only.

765.05.099.000

765.05.991.000 / 49

765.05.990.050 / 49

EnDURO / SMC

CARBOn FROnT hEAT pROTECTOR Only for use on Akrapovic Titanium Factory Header 765.05.907.100. On 690 SMC also useable for the stock header.

CARBOn CEnTER hEAT pROTECTOR For mounting on original Exhaust, but also for use on Akrapovic Header 765.05.907.100 and Silencer 765.05.099.000.

SLipOn TiTAniUM SiLEnCER 765.05.907.100 EnDURO / SMC TiTAniUM FACTORY hEADERS The Akrapovic system is designed for KTM riders who are looking for the finest available aftermarket exhaust systems and know how to get the most out of the increased performance on the track. The system comes with the hexagonal design muffler, which goes great with the sharp lines of your KTM. Removeable spark arrestor included. Mounting possible with original header and also with the factory header 76505907000. For closed course use only.

765.05.990.060 / 49

765.12.945.200

756.12.945.100

EnDURO / SMC

DUKE

TUninG KiT EVO 2 Give your 690 engine additional performance with the KTM EVO 2 engine kit. This kit includes a K & N cone style racing filter, revised racing cam shaft and filter mounting kit. For maximum performance, the Akrapovic exhaust system should be used with this kit. Note: For proper performance the special map must be used. For closed course use only.

TUninG-KiT EVO 1 Give your 690 engine additional performance with the KTM EVO 1 engine kit. This kit includes a K & N cone style racing filter, revised racing cam shaft and filter mounting kit. For maximum performance, the Akrapovic exhaust system should be used with this kit. Note: For proper performance the special map must be used. For closed course use only.

765.12.945.100

756.12.945.000

EnDURO / SMC

DUKE

TUninG KiT EVO 2 COMpLETE Like 765.12.945.200 with additional exhaust system.

TUninG KiT EVO 1 COMpLETE Like 756.12.945.100 with additional exhaust system.

EnDURO / SMC CARBOn REAR hEAT pROTECTOR For Mounting on original Exhaust, but also for use on Akrapovic Header 765.05.907.100 and Silencer 765.05.099.000.

690 LC4 Âť

117

756.05.099.000 DUKE EVOLUTiOn TiTAniUM SiLEnCER This exhaust system is specially developed for the Duke. This means light weight and maximum performance gains. Mounting only possible in combination with the factory header 756.05.907.000. For closed course use only.

756.05.907.100 DUKE TiTAniUM FACTORY hEADERS

765.05.099.200 EnDURO / SMC SLip-On ALUMinUM SiLEnCER Slip-on Silencer with very nice cost- performance ratio. The combination of aluminum outer sleeve and stainless steel endcap guarantees low weight and good durability. For closed course use only.

690 LC4 Âť

119

765.01.099.025 / 04

750.01.099.033 / 04

EnDURO

SM / DUKE

610.02.055.060

SXS.05.450.220

765.13.903.000

586.13.003.100

SM / DUKE

SM / EnDURO / SMC

EnDURO

SM / SMC

CnC CAp CLUTCh RESERVOiR CNC machined design made of high-strength aluminum.

CnC hYDRAULiC CLUTCh COVER CNC machined design made of high-strength aluminum.

CnC hAnD-BRAKE CYLinDER COVER CNC machined design made of high-strength aluminum.

CnC TRipLE CLAMp Offset 22.5 or 25.5 mm.

CnC TRipLE CLAMp CNC machined. Easy adjustable offset 30.5 mm or 33.5 mm. Front wheel and Fork does not need to be removed for changing the offset. Set includes pivot tube und lower bearing. When using the offset 33.5 mm the steering lock is not useable. For mounting of the handlebar you need one of the three below listed handlebar supports.

765.01.199.035 / 04 SMC CnC TRipLE CLAMp Offset 32.5 or 35.5 mm.

594.01.039.044 594.01.039.144 610.13.009.100

SXS.08.300.040

611.01.039.044 / 30

SM / DUKE

SM / DUKE / SMC / EnDURO

hAnDLEBAR SUppORT

CnC CAp BRAKE-FLUiD RESERVOiR CNC machined design made of high-strength aluminum.

CnC KnOB ADJUSTER SET CNC machined aluminum.

37 mm 47 mm

EnDURO / SMC hAnDLEBAR SUppORT Available in two different heights.

595.01.039.244 EnDURO / SMC FACTORY hAnDLEBAR SUppORT Three possible height adjustments, 28 mm, 37 mm, 46 mm.

690 LC4 »

121

SXS.07.125.200 EnDURO / SMC phDS pROGRESSiVE hAnDLEBAR DAMpinG SYSTEM Advantages: – Headshake and hard hits dampened. – Vibrations from chassis and engine absorbed. – Handlebars additionally damped in horizontal direction. – Optimal steering precision. – Handlebar height adjustable in two positions. – Protects the hand and shoulder joints. – Individual set-up possible due to the selection of different damping elements supplied. – CNC-milled.

548.02.001.300 / 04 EnDURO / SMC ORAnGE hAnDLEBAR Laser etched positioning grid. Made for KTM exclusively by Renthal. 604 Bend 28.5 mm large diameter clamping area. Dimensions: A: 99 mm; B: 802 mm; C: 54 mm.

690 LC4 Âť

765.14.901.044 EnDURO / SMC X2 LiGhT The X2 Halogen lighting system features a high quality 4" driving lamp and 2" spot lamp to turn night into day! This self contained lighting system is great for upgrading your stock lighting. Meets DOT approval standards. Comes with a black mask but a orange headlight mask (780.08.907.000/04) is also available.

123

690 LC4 Âť

125

770.13.920.100

600.13.030.100

SM / DUKE / SMC

EnDURO

BAnJO BOLT wiTh BLEEDER FUnCTiOn

BRAKE pADS FROnT These pads provide consistent feel for use on high speed tracks with higher braking demands. Works perfect with stock brake-discs and also with the wave-disc 61109960000. For race use only!

613.03.946.044 SM / DUKE CRAShpAD FOOTpEG Crashpads to be mounted on the passenger footpeg.

770.13.920.000 SM / DUKE / SMC / EnDURO BRAKE BLEEDER SCREw Brake system bleeding made simple. By installing this new bleeder screw with special holding valve, you simply open the screw of the return-valve a half turn and pump the brake fluid through the brake system. The special holding valve prevents air getting sucked back into the system. The result: you don't need to have a second person to pump or open and close the bleeder screw. Changing the brake fluid or bleeding the system is done in seconds. Comes with anodized mud cap. 770.13.920.000 for rear brake calipers SM 0709, SMC 08-10, Duke 08-10 and front and rear brake caliper Enduro 08-11. 770.13.920.100 for front brake calipers SM 07-09, SMC 08-10 and Duke 08-10.

750.03.045.000 SM / DUKE / SMC FROnT 750.03.046.100 SM / DUKE / SMC REAR CRASh pADS Will protect your forks / swingarm in the event of a crash. 611.09.960.000 DUKE wAVE AVE BRAKE DiSC 320 MM Stainless floating disc with anodized orange center provides consistent brake performance under extreme conditions. Even at the highest temperatures the outer disc does not bend or warp due to the advanced design and race proven materials. The alloy center is lighter than original rotors and is race track approved. Specially designed for the KTM superbikes this rotor is a great combination of improved performance and visual appeal.

620.14.949.000 SM / DUKE / SMC / EnDURO ADApTiVE BRAKELiGhT Add increased visibility on the road. In the event of hard braking, the control unit pulses the rear brake light alerting traffic behind you.

690 LC4 Âť

127

750.12.035.044 SM / DUKE ALARM SYSTEM MOUnTinG KiT 780.01.095.000

U691.0017

SM / DUKE / SMC / EnDURO

nEOpREnE FORK COVER The perfect neoprene protection for your forks, for use with closed fork protection.

750.03.090.000

765.03.090.100

EnDURO / SMC

SKiD pLATE

SKiD pLATE ALUMinUM

600.12.035.100 SM / DUKE ALARM SYSTEM Plug and Play Failsafe twin circuit immobilization. Water and vibration resistant resin bonded construction. Integral movement sensor. Seat is also secured. 2 x waterproof anti-scan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life).

690.13.950.044

690.34.931.044

750.35.940.000

SM / DUKE

ARTiCULATED BRAKE LEVER KiT Lightweight racing lever designed to bend away in case of a spill. Fully adjustable.

ARTiCULATED CLUTCh LEVER KiT Lightweight racing lever designed to bend away in case of a spill. Fully adjustable.

RADiATOR pROTECTiOn

690 LC4 »

129

750.07.040.200 SM / DUKE ERGO SEAT hiGh Seat with gel insert. The gel insert will increase the comfort, especially on long trips. Duke: +40 mm / Supermoto: +20 mm (measures compared to standard seat).

765.35.940.000 EnDURO / SMC RADiATOR pROTECTiOn

601.03.923.050 EnDURO / SMC

756.07.040.100

750.07.040.100

SM / DUKE

ERGO SEAT MiD Duke: + 20 mm / Supermoto: Hight identical to standard seat.

ERGO SEAT LOw Duke: Height identical to standard seat / Supermoto: – 20 mm.

STAnD pLATE BiG With this bigger stand plate your bike stands really safe, even on soft ground.

756.12.962.044 SM / DUKE BRACKET FOR U-LOCK The practical solution, to fix the U-lock 600.12.016.000 on your bike. Made of steel. Black powder-coated.

756.12.918.000

620.12.940.050

SM / DUKE

SM / DUKE / SMC / EnDURO

BRACKET / U-LOCK KiT As 756.12.962.044 but with U-lock 600.12.016.000.

EXTEnSiOnS REAR ViEw MiRROR If you want to improve your rear view, this is the solution for you. Mounts betweens the stock mirrors and adapters.

750.12.019.100

765.07.940.000

SM / DUKE / SMC / EnDURO

EnDURO

ERGO SEAT New developed seat foam adds all day comfort. Height is similar to stock.

690 LC4 Âť

131

620.02.903.000 SUppORT FOR GpS / pDA BAGS For mounting on the stock handlebar supports!

620.02.903.050

620.02.903.150

GpS / pDA BAG SMALL Great travel bag to help keep electronics dry and shock secured. Dimensions: 140 x 90 x 35 mm.

GpS / pDA BAG BiG Dimensions: 170 x 130 x 35 mm.

750.08.065.044

756.08.065.100

765.08.065.000

DUKE

EnDURO / SMC

TOURinG winDSCREEn We recommend the touring windscreen for longer trips.

690 LC4 Âť

133

600.12.078.100

756.12.978.000

SM / DUKE / SMC / EnDURO

UniVERSAL REAR BAG / RUCKSACK This new designed bag can be used as rear bag on the carrier plate of the bike, or as rucksack on the riders back. By using the circular zip, the volume can be increased very simply. The bag offers a raincover, an additional storage room for small items and rubber straps on the top to fix a jacket, gloves, etc.

REAR BAG Bag with Quick-Lock System for easy mounting. The volume of the bag is between 12 and 18 liters variable. The bracket 750.12.027.150 or 765.12.027.050 is also necessary for correct mounting.

750.12.027.150

765.12.027.050

765.12.090.044

SM / DUKE

EnDURO / SMC

EnDURO

BRACKET FOR TOpCASE For Top case 37, 46 (page 97) and rear bag 600.12.078.000.

BRACKET For rear bag 600.12.078.000, 600.12.078.100. For mounting you need the suitcase carrier system 765.12.020.000, or the original provided handhold.

ROADBOOK CARRiER Change your 690 Enduro into a Rally. Stable construction for racing use. For mounting the roadbook carrier 600.12.073.000 the wiring harness 765.12.090.090 and remote control 600.12.073.080 are also required.

690 LC4 »

135

600.12.025.060 inSiDE pOCKET 35 L The clever option to the aluminum suitcase system. Whether you’re staying in a tent, or hotel: your luggage is always close to hand. 601.12.929.000 ALUMinUM TOpCASE 38 L Size approx: 31 x 40 x 30 cm.

601.12.924.000

765.12.920.000

ALUMinUM CASE 38 L Durable, water-proof individual bags made of 1.5 mm aluminum without edge welding seams. Rounded constrution with robust plastic protectors on the corners. Can be used on right and left sides. Fits the luggage rack system 765.12.920.000 (not included). Two locking mechanisms with articulation function for the cover, locking eyelets on the top and mounts for additional locks. Capacity: approx. 38 liters; 44 x 24 x 39 cm – Inside Pocket = 600.12.025.060.

EnDURO / SMC SUiTCASE CARRiER SYSTEM Rigid steel tubular construction for mounting of aluminum cases. Simple installation, without any modification of the passenger foot pegs, perfect load distribution to the existing mounting points on the chassis.

584.12.078.000

583.12.078.000

REAR BAG Well thought out rear bag for all LC4 models with many small compartments. For mounting on the luggage rack.

TOOL BAG

601.12.078.000

601.12.178.000

ROLL BAG Completely water proof duffle bag that can be rolled up for flexible volume. Includes attachment straps and shoulder strap. Great for keeping clothes and camping equipment dry!

ZippER LOCK Avoids thieves' quick entry to your luggage! For use on 750.12.019.100, 601.12.078.000, 600.12.078.100 and 600.12.078.000.

690 LC4 Âť

137

600.12.073.000 ROADBOOK Electrical drive incl. paper brake, manual operation possible, extra large paper roll: up to 80 A5 sheets (approx. 17 m), Waterproof, Lighting included, opens and closes with no tools, housing dimensions: (L x W x H) 197 x 124 x 70 mm. If you want to mount the roadbook on the handlebarsupport 601.12.092.070 or on the roadbook carrier 582.12.090.144 you also need for mounting 600.12.173.070.

SXS.05.450.200

750.38.050.044

765.06.115.000

750.06.115.100

SM / DUKE

EnDURO / SMC

SM / DUKE

OiL COOLER SET Specially developed for riders who use their Supermoto / Duke on the race track. Thereby the oil temperature is always indicated in the green area.

FOAM AiRFiLTER

K&n AiRFiLTER Increases airflow for more power and washable for extended service life. Works great when combined with the factory exhaust system.

750.38.041.100

765.07.008.060

772.30.002.060 / 04

SM / DUKE / EnDURO / SMC

EnDURO / SMC

SM / DUKE / SMC / EnDURO

OiLFiLTER CAp CNC machined design made of high-strentgh aluminum, orange anodized.

FOAMRUBBER FOR TAnKCAp Prevents dirt and mud from falling into the tank when refueling.

FACTORY iGniTiOn COVER pLUG

SXS OiL pLUG CNC machined aluminum.

601.12.092.070 hAnDLEBAR SUppORT FOR GpS BRACKET For GPS brackets page 105.

690 LC4 » 765.08.013.000 / 30 765.08.013.000 / 04

139

EnDURO / SMC

765.08.041.000 / 30 L 765.08.041.000 / 04 L 765.08.042.000 / 30 R 765.08.042.000 / 04 R

765.08.050.000 / 30 L 765.08.050.000 / 04 L 765.08.051.000 / 30 R 765.08.051.000 / 04 R

REAR FEnDER

EnDURO / SMC

SiDEFAiRinG L = Left, R = Right.

SpOiLER L = Left, R = Right.

765.08.001.000 / 30 765.08.001.000 / 04 EnDURO / SMC 780.08.001.000 / 30 780.08.001.000 / 04 EnDURO R hEADLiGhT MASK

765.08.010.000 / 30 765.08.010.000 / 04 EnDURO 773.08.210.000 / 30 773.08.210.000 / 04 SMC 765.08.010.100 / 30 765.08.010.100 / 04 EnDURO R FROnT FEnDER

780.11.909.100 / 30

780.01.094.100 / 04

780.01.094.100 / 30

EnDURO R

EnDURO

hEADLAMp GRiD

FORK pROTECTiOn SET

FORK pROTECTiOn SET 765.08.999.000 EnDURO / SMC GRAphiCS KiT BLACK Not useable for Enduro R.

690 LC4 Âť

141

(B)

(A)

5200.0024 5200.0090 5200.0091 548.02.005.000 BAR EnDS Eliminates the need to replace ripped-up grips whenever your machine kisses the ground.

602.02.179.000 / 28 602.02.179.000 / 04

hAnDGUARDS

ALL USD FORKS 43 MM (A) ALL USD FORKS 48 MM (B) ALL USD FORKS 48 MM (C)

FORK pROTECTiOn STiCKER SET Extra thick material, protects your fork against stones.

590.03.090.250 FOAM To be mounted between engine and skid plate. Thereby, less mud can collect there allowing the engine to cool better.

780.02.979.000 / 28 780.02.979.000 / 04

U695.1087 hUB DECAL KiT

780.09.099.000

765.09.099.000

RiM STiCKER SET 21" / 18" Ready cut sticker for adding on front and rear rim.

RiM STiCKER SET 21" / 18" 611.09.099.000 611.09.099.000 / 20 RiM STiCKER SET 17" Ready cut sticker for adding on front and rear rim.

690 LC4 Âť

143

583.10.051.038 583.10.051.042 583.10.151.040 583.10.151.045 583.10.151.048 583.10.151.049 583.10.151.050 583.10.151.051 583.10.151.052

503.10.800.118 / 04 5/8 x 1/4 (520) ChAin Z RinG The special Z-ring compresses when assembled creating a better seal. This ensures smooth action and longer chain life. 118 link.

Z38 Z42 Z40 Z45 Z48 Z49 Z50 Z51 Z52

REAR SpROCKET High strength aluminum, extra light. 584.10.051.038 / 04 584.10.051.040 / 04 584.10.051.042 / 04 584.10.051.044 / 04 584.10.051.046 / 04 584.10.051.048 / 04 584.10.051.049 / 04 584.10.051.050 / 04 584.10.051.051 / 04 584.10.051.052 / 04

Z38 Z40 Z42 Z44 Z46 Z48 Z49 Z50 Z51 Z52

772.10.965.118 5 / 8 X 1 / 4 (520) ChAin BLACK SCALE The Black Scale chain by RK is a performance chain that combines great technical features with an exclusive appeal coming from its black hard coated plates with brassed pins and rollers. 118 link.

REAR SpROCKET ORAnGE This sprocket has steel teeth and an aluminum inner part. Both sections are permanently joined by high strength rivets. Stealth sprockets last at least 3 times longer than any other aluminum sprocket whilst it is half the weight of a normal steel sprocket. The steel teeth also offer greater life for your whole system. Not just the sprocket, but the chain and front sprocket as well. If you are looking for the ultimate in quality and performance, this sprocket will meet your demand.

U695.1067 U695.1068 U695.1069 U690.6815 U695.1070 U690.6816 U695.1071

Z41 Z44 Z48 Z49 Z50 Z51 Z52

REnThAL SpROCKET Made exclusively for KTM by Renthal, these orange anodized rear sprockets are used by the KTM Race Teams. Lightweight, durable and provide great performance.

582.10.051.042 582.10.051.045 582.10.051.048 582.10.051.050

Z42 Z45 Z48 Z50

REAR SpROCKET STEEL Very durable, recommended for long trips.

580.33.029.014 580.33.029.015 580.33.029.016 580.33.029.017 FROnT SpROCKET

Z14 Z15 Z16 Z17

690 LC4 Âť

145

548.03.047.000

548.03.040.000

548.03.040.050

SM / DUKE / SMC / EnDURO

ADJUSTABLE FOOTREST These footrests offer a wide range of adjustability. They can be tilted 5 degrees forward or backward, and they can be raised or lowered by 6mm.

FOR 548.03.040.000

FOOT-pEG SLiDERS Fiberglass reinforced plastic material, fits on all bikes with foot peg numbers 590.03.041.250 right and 590.03.040.250 left.

780.03.940.144 SMC / EnDURO

SXS.08.125.610 BLEEDER VALVE SET Specially for WP Fork designed bleeder valves, allowing quick and accurate removal of built up, unwanted air inside your fork legs.

piVOTinG FOOTpEGS Pivot Pegz have a unique & precisely tuned spring loaded pivoting action that actively tracks with the motion of the riders feet. Used by thousands of riders worldwide. Patented & race proven pivoting action improves grip, comfort & control while actively promoting correct riding technique & reducing fatigue.

SLiDERS FOR ADJUSTABLE FOOTREST SET

TOOLS

U690.8840

147

TOOLS »

149

610.29.055.400

610.29.055.110

610.29.055.120

610.29.055.130

950 / 990 ADVEnTURE 990 SUpER DUKE 950 / 990 SM RC8 690 SM / DUKE / EnDURO / SMC

SET OF RUBBER ADApTERS

wORKShOp ADApTERS

SET OF FORK ADApTERS wiTh BOBBinS

REAR whEEL STAnD For using the rear stand, you also need one of the three possible adapter kits.

Pit mat – Factory look for your pit

610.29.055.600 RC8 FROnT hEADSTOCK STAnD As 610.29.055.500 with additional location bolt 610.29.055.610, specially for RC8.

610.29.055.500

610.29.055.300

610.29.055.244

950 / 990 ADVEnTURE 990 SUpER DUKE 690 SM / DUKE

RC8 990 SUpER DUKE 950 / 990 SM 690 SM / DUKE / SMC 640 DUKE

950 / 990 ADVEnTURE 990 SUpER DUKE 950 / 990 SM RC8 690 SM / DUKE / EnDURO / SMC

FROnT hEADSTOCK STAnD Including fork adapters, front wheel stand should only be used when rear wheel stand is already mounted.

BOBBinS FOR REAR whEELSTAnD

FROnT hEADSTOCK STAnD Front headstock stand should only be used when rear wheel stand is already mounted.

U695.1277 780.12.006.000 piT MAT At many races already a must in the service zone! This mat helps with finding fallen tools, bolts and other small parts when service your KTM in the pit area. Due to the special material mix, it features perfect protection against environmental pollution when quick fueling during the race. The KTM design brings perfect factory look to your service- and fuel zone. Dimensions: 160 x 100 cm.

FOLDinG BiKE RAMp This lightweight KTM bike ramp is the best one we have tested for daily use. This folding ramp is made of a high strength aluminum, and designed for reliable easy use. The ramp also incorporates a safety strap, when used properly, keeps the ramp from sliding forward when you are loading and unloading your bike. Total length is ~200 cm, folded its ~100 cm. Weighs less than 5,5 kg. 180 kg max. capacity.

TOOLS »

151

U695.1099

584.29.074.100

U690.9801

451.29.075.000

U6909.852

TiRE GAUGE 0-60 PSI, This accurate gauge is a must have for

BATTERY ChARGinG AnD TESTinG UniT Test, charge and store batteries: a fully automatic and protective battery charger thanks to a programmed charging characteristic. The well arranged LC-Display shows the charge state, reverse polarity protection, short-circuit-protection, overload protection; absolutely simple and safe. Plug for USA: 58429074004.

BATTERY ChARGER Battery charger with test function. Further functions: – Constant current charge, – Constant voltage charge, – Float charge. Includes cable to fix on the battery with quick plug to be connected to the charger.

REV METER Usable on 4-stroke and 2-stroke engines, displays up to 16,000 rpm.

773.29.068.000

773.12.030.000

U690.8840

U695.1439

U695.1130

SChRADER VALVE CAp SET Orange anodized cap with schrader valve removal tool.

VALVE CAp SET

ORAnGE CABLE TiES 100 pieces, length: 20 cm.

TiRE GAUGE DiGiTAL Comfortable and easy to use. Fits all currently available valves. Pressure display in bar or psi. Integrated pressure release valve for accurate pressure adjustment. Switchable display and work area lighting. Battery saver mode by means of automatic switch-off. Max. measurable pressure 11 bar / 154 psi.

FOOT-AiRpUMp Mini-footpump with pressure gauge on the swivelling valve head that fits all prevalent valves. Integrated doublecylinder with pressure switch-over to high pressure. Max. 12 bar/160 psi. Height: approx. 170 mm folded together.

every KTM tool box. Features a stainless steel braided line, rubber coated exterior and a pressure release button.

TOOLS »

153

595.12.030.100

595.12.030.000

772.31.997.000/04

EXhAUST pLUG Keeps water out of the silencer when cleaning, for 40 – 62 mm inner diameters.

EXhAUST pLUG Keeps water out of the silencer when cleaning, for 15 – 38 mm inner diameters.

VEnT hOSE Petrol resistant, perfect for tank and carburetor ventilation. Approx. 3 meters long. Should not be used as supply line.

625.12.007.000

590.12.007.000

pROTECTiVE COVER inDOOR No chance for dust, or unwanted scratches etc to damage your bike, thanks to the KTM indoor bike cover which makes your bike an eye-catcher in the garage aswell. The cover is made from a special fabric with a distinctive structure that does not allow dust or condensation to pass through. The inner-side has a soft lining.

pROTECTiVE COVER OUTDOOR Strong, lightweight bike cover that is UV and water resistant. The sewn in elastic band along the bottom keeps the cover secure to the bike. Great for travel, this cover folds up small into the supplied carrying case.

U695.1562

600.12.016.000

812.12.016.000

U695.1409

pLASTiC DRUM KTM orange plastic drum for race purpose. Complete with flexible hose and twist-on cap. Approximately 18 liters volume. In some countries it is not allowed to use the drum for transportation of fuel or to store fuel indoors.

hiGh SECURiTY U-LOOK Double closing U-type lock. Hardened steel body. 7 pin tubular lock, drill protected, complies with best standards, 250,000 key variations, increased resistance to picking, supplied with 2 keys. Rotative PVC lock protector. Hardened steel shackle, resists hacksaws and boltcutters. Corrosion protection by electrical deposit treatment, PVC coated. Tensile strength superior to 12 tons.

wASh CAp FUEL hOSE OSE These wash caps cover the quick release connectors of the fuel supply line. This allows you to remove your tank for service and keep your fuel supply line clean.

MAGnETiC BOLT pAn An easy way to keep track of those bolts when maintaining your KTM. Features a strong magnetic bottom with a rubber coating.

590.29.050.000

780.29.062.000 / 30

601.12.919.000

780.29.063.000

FUnnEL Specially designed to suit KTM fuel tanks. This funnel has an optimised diameter to suit two different filler necks and also has an integral groove for perfect ventilation during filling.

MAGnETiC BOLT pAn With magnetic application, no more lost screws!

hELMET LOCK AnD DRY BAG This little package includes all you need to secure your helmet on your bike. Incl. steel cord, number lock and waterproof bag to carry the helmet.

MEASURUnG CUp 1000 ML Volume 1 L.. Features scale, perfect for oil change on your bike. Easy handling due to ergonomic form.

TOOLS Âť

583.10.025.000 AXLE GAUGE

155

503.05.017.000 / 04

590.29.041.000

U695.1126

000.29.098.200

U695.1188

SpRinG hOOK Easy spring removal.

0,10; 0,12; 0,15; 0,20; 0,25.

SpOKE TORqUE wREnCh Avoid the common problem of overtightening your spokes. This wrench is preset and lets you know when your spokes are properly tensioned.

SCREw DRiVER SET High quality 5 piece screw driver set in KTM design.

CLEAninG KiT Everything you need to keep your KTM looking showroom clean. Kit includes a 5 gallon KTM bucket, mud scraper, 1 liter spray bottle of Motorex Moto Clean 900, 15 mm x 38 mm exhaust plug, sponge, and a quick-dry towel.

590.29.041.100 0,05; 0,10; 0,15; 0,20; 0,25; 0,30; 0,35. FEELER GAUGES

510.12.093.000

U695.1045

TiRE iROn LOnG

TiRE iROn SET

510.12.092.000 TiRE iROn SMALL Special Tire lever optimized for KTM. Short version ideal for the travelling tool kit. Longer version for minimum effort when using.

510.12.091.000

579.29.020.000

U690.7854

548.12.061.000

SpOKE wREnCh 6 and 7 mm.

ChAin BREAKER 5/8 x 1/4.

wiRE pLiERS Safety wire your bike quickly and securely using these specialty pliers.

SAFETY wiRE Required for most road racing. Stainless steel type 302/304 ASTM wire. .025 mm diameter. 1lb.

TOOLS »

157

000.29.098.000 TOOLBOX With this 1/4" drive tool box small jobs on your KTM can be done quickly and efficiently. Whether it’s changing the plastic parts or carrying out an oil change, you‘ll find the right tool here. 38-item, orange tool box; high-quality chrome-vanadium tools. Ratchet (with locking device), clamping bolt, two extensions and socket wrench. Nut spinners from 4 to 14; Allen keys from 3 to 8; Phillips, slotted, as well as Torx bits. U691.0046

610.12.016.000

601.12.002.000

SOFT TiE DOwnS These tie-down straps have soft ties built in, so you don’t scratch your bars. KTM orange / black with distinctive KTM Racing markings.

BRAKE LOCK The assistance for loading the bike, or lifting it with the rear wheel stand.

TRAnSpORT hARnESS STREET This transport harness allows a safe handlebar connection point and moves the anchor point away from expensive body panels. Together with one of the soft tie down sets, the bike is perfectly secured on the way to the next race track. Harness features robust plastic cups with rubber inlet to avoid damages to the handlebar.

U695.5037 SOFT TiE DOwnS These tough KTM soft ties allow you to strap down your bike without scratching your handlebars or tank. Built from a durable ballistic nylon, they have a 615 LB weight capacity. Dimensions: 1.5" x 6’.

U691.0047

000.29.098.100

SOFT TiE DOwnS wiTh CLipS Our KTM Tie-Downs feature built-in soft tie loops that allow you to secure your KTM without scratching your handlebars. These extra wide webbing units feature a clip hook on one end, plus high quality friction lock fasteners. KTM Orange/black with distinctive KTM PowerParts markings.

TOOLBOX With this 3 / 8" drive tool box small jobs on your KTM can be done quickly and efficiently. Whether it’s changing the plastic parts or carrying out an oil change on your KTM, you’ll find the right tool here. 60-item, orange tool box, high-quality chrome-vanadium tools. Ratchet (with locking device), clamping bolt, two extensions and socket wrench. Nut spinners from 6 to 24, Allen keys from 3 to 10, Phillips, slotted, as well as Torx bits from 15 to 55.

OVERViEw »

159

STREET EqUipMEnT »

9 (M) 3pw111123 (L) 3pw111124 (XL) 3pw111125 (XXL) 3pw111126

(M) 3pw111133 (L) 3pw111134 (XL) 3pw111135 (XXL) 3pw111136

VEnTED JACKET

pURE ADVEnTURE JACKET

Breathable summer jacket. Upper material comprised of tear-resistant and abrasion-resistant polyester/

Wind and waterproof, breathable touring jacket made from polyamide. SaS-Tec protectors on the shoulders

polyamide blended fabric. Excellent venting thanks to large ventilation zones in front and back. Comfort collar, SaS-

and elbows. Viscoelastic foam in back protector pocket, SaS-Tec back protector available as an option. Adjustable comfort collar. Waist adjustment. Wind and waterproof

Tec 3D protectors on shoulders and elbows. Waistband adjustment. Reflective areas. Small connecting zipper.

RC8 »

front closure. Ventilation zips at the front, back and on the sleeves. Long and short connecting zipper and seat 690.08.101.000

690.08.110.000

690.08.102.000

690.08.103.000

FiBERGLASS FROnT FAiRinG

FiBERGLASS FROnT FEnDER

FiBERGLASS LEFT SiDE FAiRinG

FiBERGLASS RiGhT SiDE FAiRinG 690.06.915.100 AiR FiLTER RACinG Racing air filter with a higher air flow rate for better performance. Cleanable and reusable for extended service life.

690.33.929.015 690.33.929.016 690.33.929.017

Z15 Z16 Z17

FROnT SpROCKET 520

691.08.908.000

Only for use with 520 chain.

RACinG winDShiELD Clear windshield with special shape, directly derived from IDM factory racing team!

(S/48) 3 3pw111012 3pw111013 (M/50) 3 3pw111014 (L/52) 3pw 3pw111015 (XL/54) 3 3pw111016 (XXL/56) 3 3pw111017 (XXXL/58) 3

690.05.014.000

690.03.901.023

690.34.931.066

FROnT BRACKET EXhAUST hOLDER Additional weight reduction due to

STEERinG STOppER Protects the steering damper from damage due to extreme handlebar movement. Fits all RC8 models

REVERSE GEAR ChAnGE KiT

removed horn, and horn-holder.

from VIN VBKVR94068M947878.

691.30.986.044 RC8 RC8 R

08 – 10 09 – 11

CARBOn CLUTCh COVER pROTECTOR 691.30.985.044

TECh 1R SUiT KTM TEC

690.08.147.000

690.08.160.100

690.08.114.000

FiBERGLASS SEAT FAiRinG

FiBERGLASS UnDER EnGinE FAiRinG

FiBERGLASS REAR FAiRinG

RC8 RC8 R

08 – 10 09 – 10

693.30.985.044

1.3 mm top grade leather with extended perforated panels on upper and lower body. External PU shoulder and knee protectors. Aramidic stretch panels on sleeves and crotch areas. Removable inner mesh liner with 3D mesh liner insert on the back for comfort. YKK® zippers. Patented calf expansion pockets. CE certified elbow and knee/shin protectors. Exclusively for KTM by Alpinestars.

(S/30) 3pw111222 (M/32) 3pw111223 (L/34) 3pw111224 (XL/36) 3pw111225 (XXL/38) 3pw111226 (XXXL/40) 3pw111227

(S/30) 3pw111232 (M/32) 3pw111233 (L/34) 3pw111234 (XL/36) 3pw111235 (XXL/38) 3pw111236 (XXXL/40) 3pw111237

VEnTED pAnTS

pURE ADVEnTURE pAnTS

Breathable summer pants. Upper material comprised of

Wind and waterproof, breathable touring pants made from

tear-resistant and abrasion-resistant polyester/polyamide blended fabric. Excellent venting thanks to large ventilation

polyamide with reinforcements on areas where you are likely to fall. SaS-Tec protectors on the knees. Stretch zones above the knee, in the hollow of the knee and on the back.

zones in front and back. Textile stretch zone on back below the waistband and on the front above the knee. SaS-Tec 3D protectors on the knee. Viscoelastic foam on the hip.

RC8 R

690.08.947.000

CARBOn EnGinE pROTECTOR LEFT

FiBERGLASS SEAT FAiRinG wiTh qUiCK CLOSURE

A must for FIM compliance in superstock racing, also protects your engine on the street in case of a fall. 690.10.965.120 ChAin 520 High strength and high efficiency chain, reduces drag. That means increased

High-cut back. Comfort stretch waistband, rapid waistband adjustment, calf width adjustment. Wind and waterproof

Waistband adjustment. Doubled material on knee and seat panel. Calf width adjustment. Small connecting zipper.

front closure. Ventilation zip. Long and short connecting zipper. Removable thermal lining. Removable Z liner.

690.08.901.150

450.07.040.050

qUiCK CLOSURE

COUnTERpART qUiCK CLOSURE

performance of the bike!

690.08.147.150 SEAT COnTACT SURFACE

690.10.951.134 690.10.951.135 690.10.951.137 690.10.951.138 690.10.951.139 690.10.951.140 690.10.951.141 690.10.951.142

Z34 Z35 Z37 Z38 Z39 Z40 Z41 Z42

690.13.930.000

600.05.022.244

690.11.046.044

690.11.046.144

SLS REMOVAL KiT Mounting only possible on Akrapovic exhaust

SiDESTAnD REMOVAL KiT For quick sidestand removal. Leave

SiDESTAnD REMOVAL KiT Completely remove the side stand and

system 69005283000 or 69005283100 and use of special Akrapovic Mapping!

the support on the bike and plug in the adapter for the sidestand sensor.

stock support, and mount the lightweight shifting shaft support. Weight reduction plus a real race appearance.

690.07.908.000

discs and also with the wave-style discs 61109960000. For race use only!

REAR SpROCKET 520 Made of high-strength aluminum.

This self-adhesive seat contact surface gives you the perfect contact to your bike. For use with fiberglass seat fairings 69008147000 or 69008947000.

FROnT BRAKE pADS Brake performance on a real FIM Superbike level. These pads provide consistent feel for use on high speed tracks with higher braking demands. Works perfect with stock brake-

RACinG FUEL CAp Fuel like the pro's do! Keyless and extremely quick.

Only for use with 520 chain.

690.12.034.044 RACinG MOUnTinG KiT FOR COnTROL BOX AnD VOLTAGE REGULATOR

STREET EqUipMEnT »

690.08.110.000 / 49

RC8 »

(M) 3pw111143 (L) 3pw111144 (XL) 3pw111145 (XXL) 3pw111146

RC8 »

690.08.908.000

STREET EVO JACKET Street jacket with wind and waterproof, breathable PU membrane. Removable thermal lining for warm weather wear. Comfort collar, 3D protectors on shoulders and elbows. Visco-elastic foam in back protector pocket (SaS-Tec back protector available separately). Stretch zones for extra mobility. Long and short connecting zippers plus belt loop.

(M) 3pw111723 (L) 3pw111724 (XL) 3pw111725 (XXL) 3pw111726 pURE ADVEnTURE GLOVES

TinTED winDShiELD Special tinting improves the appearance of the bike particularly when using our carbon fairing.

(S) 3pw111712 (M) 3pw111713 (L) 3pw111714 (XL) 3pw111715 (XXL) 3pw111716 KTM Gp pRO GLOVES

Waterproof touring gloves. Leather main construction with doubled leather on palm, index finger and thumb. The PU membrane keeps out the wet and cold.

RC8

(M) 3pw091723 (L) 3pw091724 (XL) 3pw091725 (XXL) 3pw091726 Aq RACER GLOVES Waterproof racing gloves that are able to withstand any tour. Leather construction, doubled in critical areas. HIPORA® membrane. Carbon knuckle cover. Hard plastic skid plate on the palm. TPR on the edge of the hand. Large TPR wrist closure. Silicone-printed KTM logos on the middle finger and index finger give a secure hold on the controls.

(39/6,5) 3pw101031 (40/7,5) 3pw101032 (41/8) 3pw101033 (42/9) 3pw101034 (43/10) 3pw101035 (44/10,5) 3pw101036 (45/11,5) 3pw101037 (46/12) 3pw101038 (47/13) 3pw101039

(39/6,5) 3pw101011 (40/7,5) 3pw101012 (41/8) 3pw101013 (42/9) 3pw101014 (43/10) 3pw101015 (44/10,5) 3pw101016 (45/11,5) 3pw101017 (46/12) 3pw101018 (47/13) 3pw101019

SUpERTECh R BOOT Racing boots made with patented, biomechanic, removable inner boot, with its own closure mechanism. Other features include: new air vent system; aerodynamical extremely flat outer surface; aluminum inserts at the heel. Comfortable entry through a side zip which goes all the way to sole. Exclusively for KTM by Alpinestars.

TECh TOURinG BOOT Perfect for long journeys and touring. Made by Alpinestars for KTM and designed to the highest standard. Features a fully waterproof Gore-Tex© membrane. Safety features include shin protector, ankle protector and heel and toe reinforcements.

(S) 3pw111022 (M) 3pw111023 (L) 3pw111024 (XL) 3pw111025

(M) 3pw091713 (L) 3pw091714 (XL) 3pw091715 (XXL) 3pw091716

KTM BiOniC BACK pROTECTOR

VECTOR GLOVES

RC8 »

690.08.041.000 / 49

690.08.043.000 / 49

690.08.044.000 / 49

690.07.025.000 / 49

CARBOn LEFT REAR FAiRinG

CARBOn LEFT SEAT FAiRinG

CARBOn RiGhT SEAT FAiRinG

CARBOn TAnK pAD LEFT

CARBOn LEFT FROnT FAiRinG COMpLETE

690.13.950.044

690.13.950.045

690.34.931.044

ARTiCULATED BRAKE LEVER KiT Lightweight racing lever designed to bend away in case of a spill. Fully adjustable.

BRAKE LEVER ADJUSTER whEEL For use with 690.13.950.044

ARTiCULATED CLUTCh LEVER KiT Lightweight racing lever designed to bend away in case of a spill. Fully adjustable.

690.07.011.000 TAnK pAD

612.30.026.100

690.03.945.000

610.13.009.100

690.04.030.090

CLUTCh COVER CNC-machined version made of high-strength aluminum.

CRASh BOBBinS FROnT Will protect your forks in the event of a crash.

CnC BRAKE-FLUiD RESERVOiR CAp CNC-machined version made of high-strength aluminum.

SwinGARM STiCKER SET Avoids scratches to the swingarms!

690.32.900.000

690.08.110.000 / 49

611.09.960.000

CARBOn FROnT FEnDER

690.09.001.044 FROnT

CARBOn LEFT SiDE REAR FAiRinG

690.08.032.000 / 49

690.08.053.000 / 49

CARBOn UnDERSEAT FAiRinG

DE REAR FAiRinG CARBOn RiGhT SiDE

690.03.937.144

750.38.041.100

690.08.926.050

OiL FiLTER CAp CNC machined design made of highstrength aluminum, orange anodized.

qUiCK LOCK COVER

690.08.051.000 / 49

690.30.060.000 / 49

CARBOn RiGhT SiDE FROnT FAiRinG

CARBOn FROnT ChAin GUARD

RC8 »

772.30.002.060 / 04

690.07.909.000

FACTORY iGniTiOn COVER pLUG

TAnK CAp STiCKER

REAR

RC8 »

610.02.055.060

610.03.046.200

690.13.962.000

CnC CLUTCh RESERVOiR COVER CNC-machined version made of high-strength aluminum.

CRASh BOBBinS REAR Will protect your swingarm in the event of a crash.

CnC REAR BRAKE CYLinDER COVER CNC-machined version made of high-strength aluminum.

RC8 »

611.09.099.000 611.09.099.000 / 20

ALARM SYSTEM Plug and Play fail safe single circuit immobilization. Water and vibration resistant resin bonded construction. Integral movement sensor. Storage box is also secured. 2 x waterproof anti-scan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life). 69012035044 necessary for mounting.

RiM STiCKER “TATTOO” Only for wheels with 5-spokes design!

RiM STiCKER SET Ready cut sticker for adding on front and rear rim.

690.12.035.044

691.05.999.000

690.08.056.000 / 49

611.05.099.300

601.12.035.000

626.09.099.000

620.14.949.000

TiTAniUM SiLEnCER

690.05.907.000 690.29.096.140 RC8 R

691.05.907.100

CARBOn RiGhT EXhAUST FAiRinG

– Fine tune fuel injection mapping – perfect for trackside adjustments

690.04.050.000 / 49

690.08.055.000 / 49

620.10.965.118

USER SETTING TOOL

CARBOn REAR FEnDER

CARBOn LEFT EXhAUST FAiRinG

EVOLUTiOn TiTAniUM hEADER

ZippER LOCK Avoids thieves' quick entry to your luggage! For use on 69012078000 and 69012019000.

pROTECTiVE COVER inDOOR No chance for dust or unwanted scratches etc to damage your bike, thanks to the KTM indoor bike cover which makes your RC8 an eye-catcher in the garage as well. The cover is made from a special fabric with a distinctive structure that does not allow dust or condensation to pass through. The inner-side has a soft lining.

08 – 10

CARBOn DECAL

6" x 17"

690.12.007.000

690.05.283.100

690.08.999.000

3,5" x 17"

690.10.001.044 690.08.050.000 / 49 CARBOn LEFT SiDE FROnT FAiRinG

601.12.178.000

CARBOn TAnK pAD RiGhT

690.08.052.000 / 49

CARBOn REAR COVER

Optimized in visual appearance and function. This floating wave disc features clear feedback without any loss of brake performance even under heavy conditions.

AnTi-hOppinG CLUTCh RC8 Same as 691.32.900.000 with softer clutch springs.

EVOLUTiOn TiTAniUM SiLEnCER SET In combination with a modified appearance, this titanium exhaust system is an enhancement for all RC8 riders who would like to have great sound, light weight and an improved power output. The exhaust system can be mounted only in combination with 69105907100 headers. For proper mounting the lower fairing must be modified.

690.07.026.000 / 49

690.08.042.000 / 49 CARBOn RiGhT REAR FAiRinG

690.08.031.000 / 49

wAVE-TYpE BRAKE DiSC REAR

691.32.900.000 690.08.915.033 nUMBERpLATE hOLDER KiT Shorter version for a cleaner look. Includes LED blinkers.

690.08.902.000 / 49 CARBOn RiGhT FROnT FAiRinG COMpLETE

RC8 »

690.10.060.100

690.08.901.000 / 49

691.05.383.000 (OnLY FOR RACinG)

Paint the fairing as you like, attach it with the quarter turn pins and hit the track. Fiberglass fairing needs mounting kit for control box and voltage regulator 69012034044. For proper mounting you also need to order 14 pieces quick closure 69008901050 and 14 pieces receivers 45007040050.

web. Removable thermal lining. Removable Z liner.

street equipment

RC8 »

FiBERGLASS pARTS An absolute "must have" for every ambitious racer! The fiberglass fairing meets with the FIM requirements for Superstock. What this means to you;

RC8 R 09 –10

ADApTiVE BRAKELiGhT Add increased visibility on the road. In the event of hard braking, the control unit pulses the rear brake light, alerting traffic behind you.

691.05.283.100 TiTAniUM SiLEnCER EVO 4

693.05.999.000 RC8 R

691.05.907.000

611.10.051.037 / 04 611.10.051.038 / 04 611.10.051.040 / 04 611.10.051.041 / 04

RC8 R Specifically designed to be matched with the RC8-R Club Race kit, Superbike and Superstock engine kit. Should not be used without one of this 3 Tuning Kits and special Mapping.

990 super duke

Z37 Z38 Z40 Z41

TiTAniUM hEADER EVO 4

ALARM SYSTEM MOUnTinG KiT

610.12.032.000

690.12.078.000

690.12.019.000

RC8 RC8 R

08 – 10 09 – 11

OVERViEw »

161

990 SUpER DUKE »

611.12.035.044

611.32.000.100

950 / 990 SUpERMOTO »

620.02.903.050

07–10

ALARM SYSTEM MOUnTinG KiT

GpS / p DA BAG SMALL Great travel bag to help keep electronics dry and shock secured. Dimensions: 140 x 90 x 35mm.

600.30.085.000

611.08.110.000 / 49

07 – 10

CARBOn iGniTiOn COVER pROTECTiOn Effective protection against stones, made

50% weight reduction.

610.03.095.000 / 49

600.06.003.002/ 49

610.06.003.002/ 49

600.12.035.100

07–10

CARBOn FOOTREST pROTECTiOn SET

CARBOn AiRBOX COVER LEFT

CARBOn AiRBOX COVER RiGhT

CARBOn FROnT FEnDER

990 SM T

07 – 10

CARBOn COVER FOR REAR pART Finest carbon for a very elegant appearance and a

CARBOn ChAinGUARD AnD hUGGER Finest carbon for a very elegant appearance

07 – 10

the vehicle, guarantees that the system will never accidentally lock while the rider is operating the vehicle. Does not fit with Wave Brake Disc 611.09.960.000.

EVOLUTiOn TiTAniUM hEADERS 610.05.099.200

07–10

07 – 10

610.07.040.020 / 49 600.30.060.000 / 49

610.05.099.007

07 – 10

FOR 610.05.099.000

07–10

CARBOn CLUTCh COVER pROTECTiOn

CARBOn hEAT pROTECTOR

CARBOn FROnT ChAinGUARD 32 % weight reduction.

Effective protection against stones, made from Carbon Kevlar.

990 SUpER DUKE »

610.12.019.000

ZippER LOCK Avoids thieves' quick entry

07 – 10

to your luggage! For use on 610.12.019.000.

TAnK BAG Made with extra tough zippers and abrasion-

CARBOn SEAT COVER

990 SUpER DUKE »

610.02.044.100

503.13.005.000

07–10

SiDE STAnD DiSASSEMBLY KiT For quick sidestand removal. Leave the support on the bike and plug in the adapter for the sidestand sensor.

CLAMp CLUTCh CYLinDER Without mirror support.

CLAMp BRAKE CYLinDER Without mirror support.

05 – 11

map sleeve. Total capacity: 15 litres. Carrying handle, shoulder strap and rain cover included.

990 SUpER DUKE »

611.01.134.029 / 30

610.11.046.044

620.02.903.000

resistant edging of reflex material. Adjustable size main compartment, two smaller compartments,

aggressive naked bike look. Not useable for 990 Superduke R 08-09. For closed course use only.

610.03.045.200

610.04.037.050

610.13.009.100

07–10

CRASh BOBBinS FROnT Will protect your forks in the event of a crash.

SwinGARM BOLT COVER SET

CnC BRAKE-FLUiD RESERVOiR CAp CNC-machined version made of high-strength aluminum.

611.32.000.100

07–10

07–10 STEERinG DAMpER From model year 07 you need mounting kit 611.12.005.144 .

This anti-hopping clutch is a must for every ambitious rider. This racing clutch helps avoid rear wheel chatter by allowing the clutch to "slip" during downshifts and deceleration. This allows for better traction, wheel stability, and higher corner entry speeds. It also puts less fatigue on the drive train. This clutch is developed for race track use.

REAR ViEw MiRROR EXTEnSiOn If you want to improve your rear view, this is the solution for you. Mounts betweens the stock mirrors and adapters.

990 SUpER DUKE »

610.03.046.200

613.03.946.044

07–10

CRASh BOBBinS REAR Will protect your swingarm in the event of a crash.

CRAShpAD FOOTpEG Crashpads to be mounted on the passenger footpeg.

CnC CLUTCh RESERVOiR COVER CNC-machined version made of high-strength aluminum.

610.02.055.060

990 SUpER DUKE »

611.07.908.000

690.13.950.044

690.34.931.044

07–10

RACinG FUEL CAp Fuel like the pro's do! Keyless and extremely quick.

ARTiCULATED BRAKE LEVER KiT Light weight racing lever designed to bend away in case of a spill.

ARTiCULATED CLUTCh LEVER KiT Light weight racing lever designed to bend away in case of a spill.

950 SM 990 SM R

06 – 07 10 – 11

weight of both silencers together is 9.8 lbs. Over 50% lighter than the stock silencers. They also feature removable spark arrestor inserts. For closed course use only.

620.05.099.000

611.03.038.044

990 SM T

07–10 ADJUSTABLE FOOTpEG KiT These CNC machined foot pegs are made of highstrength aluminum. They feature replaceable components and allow for 6 position adjustments.

610.34.030.100 07–10

990 SUpER DUKE »

10 – 11

TiTAniUM SiLEnCER SET 59% lighter, slip-on silencer set increases performance

950 SM 990 SM T 990 SM R

reduced weight. Not for use on R models.

950 / 990 SUpERMOTO »

990 SM T 990 SM R

950 SM

610.04.037.050

10 – 11 10 – 11

06 – 07

772.30.002.060 / 04

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

950 SM 990 SM T 990 SM R

SwinGARM BOLT COVER SET

FACTORY iGniTiOn COVER pLUG

06 – 07 10 – 11 10 – 11

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11 AnTi-hOppinG G CLUTCh CLUTC This anti-hopping clutch is a must for every ambitious rider. This racing clutch helps avoid rear wheel chatter by allowing the clutch to "slip" during downshifts and deceleration. This allows for better traction, wheel stability, and higher corner entry speeds. It also puts less fatigue on the drive train. This clutch is developed for race track use.

CnC hYDRAULiC CLUTCh COVER CNC-machined version made of high-strength aluminum.

06 – 07 10 – 11 10 – 11

950 SM 990 SM R

626.05.099.200

BAnJO JO BOLT wiTh BLEEDER FUnCTiOn

06 – 07 10 – 11

990 SM T

59% lighter, slip-on silencer increases performance compared to the stock silencers. Muffler inserts can be removed for sports riding. Special mapping from an authorized KTM Street dealer required for proper performance. For closed course use only.

950 SM 990 SM R

06 – 07 10 – 11

EVOLUTiOn TiTAniUM SiLEnCER SET

950 / 990 SUpERMOTO »

half turn and pump the brake fluid through the brake system. The special holding valve prevents air getting sucked back into the system. The result:

10 – 11

EVOLUTiOn TiTAniUM SiLEnCER SET

625.05.099.300

required for proper performance. For closed course use only.

Brake system bleeding made simple. By installing this new bleeder screw with special holding valve, you simply open the screw of the return-valve a

620.05.099.200

TiTAniUM SiLEnCER SET

06 – 07 10 – 11

you don't need to have a second person to pump or open and close the bleeder screw. Changing the brake fluid or bleeding the system is done in seconds. Comes with anodized mud cap. 77013920100 for front brake caliper 05-10. 78013920000 for front brake caliper 990 SM-R 09-11.

U691.0017

and the Evolution mufflers is in the materials used. The Racing system uses high quality stainless steel, while the Evolution uses a special type of titanium The performance characteristics of the two systems are identical. The individual components are connected with sleeve joints secured with silicon-shielded springs. For the KTM Supermoto we fitted the new design Akrapovic mufflers, which are attached to the frame using Akrapovic carbon-fiber clamps. The muffler outer sleeves are titanium, as are the perforated inner tube, inlet cap and outlet tube. The outlet tube is formed using the hydroforming process accurate to the last millimeter. The outlet cap for the Supermoto is made of carbon. The result is impressive 9 kg less weight and significantly more performance. Special mapping from an authorized KTM Street dealer required for proper performance. For closed course use only.

610.13.009.100

600.30.126.200

600.13.059.200

950 SM 990 SM T 990 SM R

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

950 SM 990 SM T 990 SM R

CnC CLUTCh COVER High-quality, CNC-machined outer clutch cover with factory look. Made of high-strength aluminum.

CnC MAin BRAKE CYLinDER COVER CNC-machined version made of high-strength aluminum.

06 – 07 10 – 11 10 – 11

CnC BRAKE-FLUiD RESERVOiR COVER CNC-machined version made of high-strength aluminum.

950 / 990 SUpERMOTO »

06 – 07 10 – 11 10 – 11

950 / 990 SUpERMOTO »

610.12.032.000

07–10

990 SM T 990 SM R

GpS / pDA BAG SMALL Great travel bag to help keep electronics dry and shock secured. Dimensions: 140 x 90 x 35mm.

Brake Bleeder screw

611.10.051.038 / 04 611.10.051.040 / 04 611.10.051.041 / 04

– Fast bleeding – Easy handling – premium materials

Z38 Z40 Z41

RADiAL ROADLOK ® The patented technology powering each RoadLoK® powersport locking system provides 100% safe anti-theft locking security due to the system's permanently-mounted lock body--which literally becomes a part of the vehicle's frame. The frame-mounted solution eliminates movement completely while the system is engaged-the very movement which makes disc locks, padlocks, and chains so very dangerous if the rider forgets to remove those devices before attempting to ride off. Additionally, the removable BrakeBoltT pin, which keeps the bike locked right where the rider parks the vehicle, guarantees that the system will never accidentally

SpROCKET If you think a steel sprocket is too heavy and an aluminum sprocket wears out too quickly then we have the perfect sprocket for you! A steel outer chain ring combined with an inner aluminum carrier combines the best of both worlds to create a light weight long lasting sprocket. This not only increases rear sprocket life but also the front sprocket and chain life for up to 3 times compared to normal sprockets. If you are looking for the highest quality sprocket available and one that matches the image of your KTM your search is over!

600.12.035.100

611.09.099.000 611.09.099.000 / 20 RiM STiCKER SET Ready cut sticker for adding on front and rear rim.

ALARM SYSTEM Plug and Play Fail safe twin circuit immobilization. Water and vibration resistant resin bonded construction. Integrated microchip movement sensor. Seat secured with Reed switch.v 2x waterproof anti-scan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life).

TAnKpAD

626.09.099.000 RiM STiCKER “TATTOO” Only for wheels with 5-spokes design!

07–10 770.13.920.000

770.13.920.100

07–10

BRAKE BLEEDER SCREw

BAnJO BOLT wiTh BLEEDER FUnCTiOn

611.10.051.037 / 04 611.10.051.038 / 04 611.10.051.040 / 04 611.10.051.041 / 04

07–10 FROnT

Z37 Z38 Z40 Z41

07 – 10

07–10 REAR

620.02.903.150

RADiAL ROADLOK ®

GpS / pDA BAG BiG Dimensions: 170 x 130 x 35 mm. 620.10.965.118

611.07.909.000

Preload adjuster rear shock 626.09.099.000

– Easy adjustability – improved appearance

RiM STiCKER “TATTOO” Only for wheels with 5-spokes design!

U690.9852

5,5" x 17"

06 – 07 10 – 11 10 – 11

MiRROR EXTEnSiOn If you want to improve your rear view, this is the solution for you. Mounts betweens the stock mirrors and adapters.

07–10

The patented technology powering each RoadLoK® powersport locking system provides 100% safe anti-theft locking security due to the system's permanently-mounted lock body--which literally becomes a part of the vehicle's frame. The frame-mounted solution eliminates movement completely while the system is engaged--the very movement which makes disc locks, padlocks, and chains so very dangerous if the rider forgets to remove those devices before attempting to ride off. Additionally, the removable BrakeBoltT pin, which keeps the bike locked right where the rider parks the vehicle, guarantees that the system will never accidentally lock while the rider is operating the vehicle. Does not fit with Wave Brake Disc 611.09.960.000.

3,5" x 17"

611.10.801.044

SpROCKET If you think a steel sprocket is too heavy and an aluminum sprocket wears out too quickly then we have the perfect sprocket for you! A steel outer chain ring combined with an inner aluminum carrier combines the best of both worlds to create a light weight long lasting sprocket. This not only increases rear sprocket life but also the front sprocket and chain life for up to 3 times compared to normal sprockets. If you are looking for the highest quality sprocket available and one that matches the image of your KTM your search is over!

950 SM 990 SM T 990 SM R

610.12.032.000

690.09.001.044 611.09.960.000

lock while the rider is operating the vehicle. Does not fit with Wave Brake Disc 611.09.960.000.

620.12.940.050

07–10

611.09.099.000 611.09.099.000 / 20

610.03.045.200

610.03.046.200

613.03.946.044

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

CRASh BOBBinS FROnT Protects your forks in the event of a crash.

CRASh BOBBinS REAR Protects your swingarm in the event of a crash.

CRAShpAD FOOTpEG Crashpads for mounting on the passenger footpegs.

620.14.949.000

600.12.035.100

950 SM 990 SM T 990 SM R

950 SM 06 – 07

ALARM SYSTEM

ALARM SYSTEM MOUnTinG KiT

RiM STiCKER SET Ready cut sticker for adding on front and rear rim. 690.09.001.044 05 – 11 FROnT

3,5" x 17"

601.12.035.000

611.10.801.044

601.12.178.000 ZippER LOCK Avoids thieves' quick entry to your luggage! For use on 610.12.019.000.

07–10 TAnK CAp STiCKER

630.03.094.044 / 30 630.03.094.044 / 04

610.12.019.000 07 – 10 TAnK BAG Made with extra tough zippers and abrasionresistant edging of reflex material. Adjustable size main compartment, two smaller compartments, map sleeve. Total capacity: 15 litres. Carrying handle, shoulder strap and rain cover included.

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

620.04.912.000 990 SM T 10 – 11 990 SM R 10 – 11

620.02.903.000 05 – 11

FRAME pROTECTiOn SET

05 – 11 REAR

990 SM T 990 SM R

5,5" x 17"

directional forging process, and detailed force vector analysis, these wheels offer a maximum weight reduction and very high rigidity values, for ideal transfer of brake and acceleration forces. Weight of wheel set app. 8.6kg.

pRELOAD ADJUSTER REAR ShOCK This shock preload adjuster allows for quick adjustment with just a T-handle wrench. Unlike other preload adjusters this one has a mechanical drive mechnism that allows the use of the entire thread range. Great for adjusting the shock for luggage or two up riding.

SUppORT FOR GpS / pDA BAGS For mounting on the stock handlebar supports!

06 – 07 10 – 11 10 – 11

brake light alerting traffic behind you.

10 – 11 10 – 11

MARChESini ALUMinUM whEEL Forged Rims, directly descended from racing. Due to a special developed multi-

ADApTiVE BRAKELiGhT Add increased visibility on the road. In the event of hard braking, the control unit pulses the rear

990 SM R 10 – 11

950 SM 06 – 07 990 SM T 10 – 11

620.02.903.050

ALARM SYSTEM MOUnTinG KiT

610.07.011.100

780.13.920.000

BRAKE BLEEDER SCREw SCRE

770.13.920.100

RACinG STAinLESS STEEL hEADER 625.05.099.000

compared to the production exhaust. Optional muffler inserts can be removed for sports riding. Special mapping from an authorized KTM Street dealer required for proper performance. For closed course use only.

07–10

Finest carbon for an elegant appearance and reduced weight.

06 – 07

Finest carbon for an elegant appearance and reduced weight.

SXS.05.450.230

06 – 07 10 – 11 10 – 11

EVOLUTiOn TiTAniUM hEADER 626.05.007.200

611.12.035.044

wAVE BRAKE DiSC 320 MM Stainless floating disc with anodized orange center provides consistent brake performance under extreme conditions. Even at the highest temperatures the outer disc does not bend or warp due to the advanced design and race proven materials. The alloy center is lighter than original rotors and is race track approved. Specially designed for the KTM superbikes this rotor is a great combination of improved performance and visual appeal.

CARBOn SpLASh pROTECTiOn

RiGhT 950 SM

CARBOn SpOiLER Finest carbon for an elegant appearance and

611.32.000.100

950 SM 990 SM T 990 SM R

REVERSE GEAR ChAnGE KiT

950 / 990 SUpERMOTO »

600.05.099.300

950 SM 990 SM R

FACTORY iGniTiOn COVER pLUG

626.05.007.100

AnTi-hOppinG CLUTCh

07–10

06 – 07 10 – 11

1618.0D03

07 – 10 CnC TOp TRipLE CLAMp For mounting of the handlebar you also need the handlebar support 6110103904430. Using the top triple clamp 61101134029/30 needs 2 pcs. bushing 61101035000 and 2 pcs. screw 61111064000 for mounting the starter lock.

620.12.940.050

772.30.002.060 / 04

CARBOn hEADLiGhT MASK Finest carbon for an elegant appearance and reduced weight.

950 / 990 SUpERMOTO »

07 – 10

CnC CLUTCh COVER High quality CNC-machined outer clutch cover with factory look. Made of high-strength aluminum.

SUppORT FOR GpS / p DA BAGS

MOUnTinG KiT FOR STEERinG DAMpER

07–10

625.01.094.000 / 49 950 SM 990 SM R

06–07

For mounting on the stock handlebar supports!

611.12.005.144

600.30.126.200

586.08.001.000 / 49 950 SM

SXS.05.450.220

U691.0017

CARBOn ChAinGUARD An nD hUGGER

06 – 07

625.08.051.000 / 49

The Akrapovic Racing and Evolution exhaust systems are designed for all those who just want to squeeze that little bit more out of their Super Duke. The complete system delivers an improved torque curve to the back wheel and saves a lot of weight, improving handling not to mention the sharp appearance. The design of the muffler for the Akrapovic Racing and Evolution systems fits exceptionally well to the

Not useable for R-Version.

LEFT 950 SM

601.12.178.000

07 – 10 EVOLUTiOn TiTAniUM SiLEnCER SET

610.05.099.300

materials and production quality. Mounting only possible with original headers. Approx. 9 kg less weight and more performance. Special mapping from a KTM dealer is required for proper performance. For closed course use only.

insert. Special mapping from a KTM Street dealer is required for proper performance. For closed course use only.

07–10 600.30.086.000

SLip-On TiTAniUM SiLEnCER SET The Akrapovic carbon tipped SLIP-ON system is a starting-level tuning component. It is an excellent combination of price, performance, top-quality

same department that designs the racing versions of Akrapovic exhaust systems. In addition, due to the use of high-tech materials, you will save weight and improve the overall characteristics of your bike. 55% weight reduction . Removable noise reduction

CARBOn FROnT ChAinGUARD 32 % weight reduction.

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

625.08.050.000 / 49

RACinG STAinLESS STEEL hEADERS SLip-On TiTAniUM SiLEnCER SET Your motor’s potential will be awakened; the designs for this system come from the

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

CARBOn iGniTiOn COVER pROTECTOR Effective protection against stones; made from Carbon Kevlar.

610.08.014.000 / 49

610.05.007.300 610.05.099.000

600.30.060.000 / 49

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

CARBOn CLUTCh COVER pROTECTOR Effective protection against stones; made from Carbon Kevlar.

rider forgets to remove those devices before attempting to ride off. Additionally, the removable BrakeBoltT pin, which keeps the bike locked right where the rider parks

610.05.007.200

weight reduction. Not useable for R-Versions.

600.30.085.000

950 SM 06 – 07 990 SM T 10 – 11 990 SM R 10 – 11

GpS / p DA BAG BiG B Dimensions: 170 x 130 x 35 mm.

solution eliminates movement completely while the system is engaged--the very movement which makes disc locks, padlocks, and chains so very dangerous if the

07 – 10

and a weight reduction.

600.30.086.000

07–10

100% safe anti-theft locking security due to the system's permanently-mounted lock body--which literally becomes a part of the vehicle's frame. The frame-mounted

anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life).

07–10

620.02.903.150

RADiAL ROADLOK ® The patented technology powering each RoadLoK® powersport locking system provides

microchip movement sensor. Seat secured with Reed switch.v 2x waterproof anti-scan, 610.08.014.000 / 49

50 % weight reduction.

610.12.032.000

immobilization. Water and vibration resistant resin bonded construction. Integrated

610.08.019.000 / 49

10 – 11

CARBOn FROnT T FEnDER FE

ALARM SYSTEM Plug and Play Fail safe twin circuit

from Carbon Kevlar.

Plug and Play Failsafe twin circuit immobilization. Water and vibration resistant resin bonded construction. Integrated microchip movement

625.12.035.044

626.12.035.044 990 SM T 10 – 11 990 SM R 10 – 11 ALARM SYSTEM MOUnTinG KiT

sensor. Seat is secured with Reed switch. 2 x waterproof anti-scan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life-span). 625.12.035.044 necessary for mounting.

OVERViEw » 950 / 990 SUpERMOTO »

163

950 / 990 SUpERMOTO »

950 / 990 ADVEnTURE »

600.12.072.000 03 – 11 TRAnSpAREnT TAnK pROTECTiVE STiCKER SET Help save the paint from scuffs when riding off road.

601.12.035.144 601.03.923.050

07 – 11

03 – 11

600.12.025.090

600.12.027.252

600.12.078.100

TOpCASE 37

BACKREST FOR TOpCASE 37 The optional backrest provides

REAR BAG

attach to the frame.

passengers more comfort.

Bag with quick-lock system for easy mounting. The volume of the bag can be varied between 12 and

are required for mounting: 950 Supermoto 625.12.027.150; 990 Supermoto 626.12.027.050. No additional carrier plate required for mounting on the

18 liters. The following carrier plates are required for mounting: 950 Supermoto 625.12.027.150;

990 SM-T. The top case can be mounted directly on the original installed parts. Size: 49 x 40 x 31 cm.

for 990 Supermoto, 626.12.027.050.

750.12.019.100

620.12.025.100

990 SM T

10 – 11

625.12.019.200

625.12.020.000

950 SM 06 – 07 990 SM T 09 – 11

950 SM

wallet, keys etc. The included map pocket makes child's play of navigation. Includes carry handle and waterproof innerbag. Finished with extra robust zipper closures. Total volume approx. 22 liters.

lightweight and very quick mounted luggage solution for the next tour. Includes waterproof inside pockets. With the optional locking kit 620.12.928.000 you can achieve a theft deterring luggage

620.12.092.044

CARRiER SYSTEM Rigid steel tubular construction . Simple installation without any

smaller compartments, removable map sleeve. Easy mounting system. Total capacity 18 liters. Handle, shoulder strap and rain cover included.

modification to the passenger foot pegs; perfect load distribution on the existing mounting points on the chassis.

system. Appr. volume 2 x 13L.

SUppORT FOR GpS BRACKET Universal application possibilities for mounting the GPS holder.

For top case 601.12.929.000

hAnDLEBAR RiSER 18 mm.

620.02.903.000

TOURinG winDSCREEn Helps eliminate wind buffeting and protects against fatigue. This taller windscreen is approx. 4 1/2" taller

SUppORT FOR GpS / p DA BAGS For mounting on the stock

and 4" wider on each side over the stock wind screen.

handlebar supports!

U691.0017

601.12.064.044

582.14.069.044

06 – 11

03 – 11

03 – 08 TRip-MASTER SwiTCh The switch comes with all necessary add-on parts.

ThROTTLE CAM SYSTEM

hEATED GRip SET

Precision machined aluminum throttle tube with delrin inserts for smooth throttle action. Includes

The heating grips, adjustable to two levels ensure you have warm hands even when the weather is bad. Grips

three updated cam profiles designed to give different throttle response with fuel injected bikes.

have holes for mounting on the hand guards.

600.12.027.400 / 30 TOpCASE ADVEnTURE Adventure Top case with an internal volume of 42 liters.

600.12.025.100 / 30

For mounting you need also the bracket 600.12.027.450. Backrest 600.12.027.452 and Inside Pocket

ADVEnTURE CASE SET Two absolutely waterproof, practically indestructible top-loader side cases (left and right), with integrated 3-liter water container (2 x). Suitable for the Adventure luggage rack system (not included).

600.12.027.453 are optional available.

Double-wall plastic construction all round, with robust metal locks on the top and sides. Volume: approx. 2 x 32 liters; 48 x 27 x 36 cm – matching inside pocket = 600.12.025.060

626.12.020.050 990 SM R

BRACKET FOR TOpCASE

03 – 11

990 SM R 10 – 11

Made with extra tough zippers and is fitted with abrasion-resistant material at the edges. Generous adjustments possible to main compartment; four

600.08.008.100

584.01.043.018

06 –07

626.12.020.000

TAnK BAG

03 – 11

FOR 600.12.025.100 AND 600.12.025.100 / 30

STAnD pLATE BiG With this bigger stand plate, your bike always stands securely, even on soft ground.

600.12.027.500

This top case with a storage capacity of 37 liters makes use of the practical press-lock system for simple opening and closing. The following carrier plates

TAnK pROTECTiOn Plastic coated tubular steel bars, which securely

601.12.929.050

LUGGAGE BRACKET SET

ALARM SYSTEM MOUnTinG KiT

620.12.068.000 990 SM 08 – 10 990 SM T 09 – 11 990 SM R 09 – 11

10 – 11

SiDE BAGS / CARRiER KiT Use the specially designed SM-T side bags, and the nearly invisible SM-T original 620.03.022.000

620.12.099.044

carrier for your 990 SM/SM-R, from MY09 on. Kit includes side bags, carrier system

990 SM R 10 – 11 990 SM T 10 – 11

CEnTER STAnD Lifts your back wheel off the ground for tire changes

EnGinE pROTECTiOn

and maintenance.

and all necessary mounting material with mounting manual.

601.12.929.000 620.14.949.000

Important notice: If you use already an Akrapovic Exhaust you need:

This aluminum engine protection not only looks great, it offers maximum protection against stones

- Evolution (62505099300, 62605099300): mounting kit 62005099010 - Slip-on (62605099000, 62605099200): mounting kit 62005099010 and Y-pipe

and other flying debris.

601.03.923.050

600.12.027.600

600.12.027.352

625.12.027.150

626.12.019.100

756.12.978.000

TOpCASE 46 This top case with a storage capacity of 46 liters

BACKREST FOR TOpCASE 46

950 SM

990 SM R 10 – 11

The optional backrest provides passengers more comfort.

626.12.027.050

UniVERSAL VERSAL REAR BAG / BACK pACK This new designed bag can be used as rear bag on the carrier

easily holds two full-face helmets. It features the latest generation of snap-shut locking

990 SM 08 – 10 990 SM T 09 – 11 990 SM R 09 – 11

990 SM R

mechanism. The case boasts an extremely elegant design with great personality. The following

With this larger stand plate, your bike always stands securely, even on soft ground.

10 – 11

For Top case 37, 46 and rear bag 600.12.078.000 or 600.12.078.100.

carrier plates are required for mounting: 950 Supermoto 625.12.027.150; 990 Supermoto

STAnD pLATE BiG

06 – 07

CARRiER pLATE FOR TOpCASE

625.12.025.000 SiDE BAGS

plate of the bike, or as a backpack. By using the circular zip, the volume can be increased very simply. The bag offers a raincover,

High quality robust saddlebags for long trips; includes interior rain protector. 62512020000 or 62612020000 is

an additional storage room for small items and rubber straps on the top to fix a jacket, gloves, etc.

necessary for correct mounting. Volume appr. 18 Liters.

601.12.078.000

601.12.978.044

ROLLBAG ROLL BAG Completely water proof duffle bag that can

950 SM 05 – 08 990 SM 08 – 10 990 SM T 09 – 11 990 SM R 09 – 11

be rolled up for flexible volume. Includes attachment straps and shoulder strap. Great for keeping clothes and camping equipment dry!

620.02.903.050

620.02.903.150

GpS / p DA BAG SMALL

GpS / p DA BAG LARGE

Great travel bag to help keep electronics dry and shock secured.

Dimensions: 170 x 130 x 35 mm.

03 – 11 ADApTiVE BRAKELiGhT

601.12.035.000

62005099050 If you plan to buy an Akrapovic Exhaust after you have mounted the Carrier kit,

07 – 11

please order one of the Exhaust system for SM-T. Carrier Kit can not be combined with the Slip-on 62505099000! Can be used on

ALARM SYSTEM Plug and Play Failsafe twin circuit immobilization. Water and vibration resistant resin bonded

bikes with VIN higher than VBKVS94009M960440!

Add increased visibility on the road. In the event of hard braking, the control unit pulses the

EXTEnDED CARRiER pLATE Ideal for transporting your luggage bag. Cannot be used

600.07.040.100

03 – 11

Size approx. 31 x 40 x 30 cm.

CRAShpAD FOOTpEG

ERGO SEAT

Crashpads to be mounted on the passenger footpegs.

Approx. 20 mm lower seat with gel insert. The gel insert increases comfort, especially on long trips.

600.12.068.100

620.12.940.050

03 – 11

03 – 11 MiRROR EXTEnSiOn

CRASh BARS Plastic-coated tubular steel bars, which securely attach to the frame.

for mounting a Topcase.

626.12.027.050. No additional carrier plate required for mounting on the 990 SM-T. The

ALUMinUM TOpCASE 38 L 613.03.946.044

03 – 11 FRAME p ROTECT ROTECTiiOn SET

rear brake light alerting traffic behind you.

construction. Integral movement sensor. Storage box is also secured. 2 x waterproof antiscan, anti-grab rolling code remote transmitters. Lithium transmitter battery (3 year life), 60112035144 necessary for mounting.

Dimensions: 140 x 90 x 35mm

630.03.094.044 / 30 630.03.094.044 / 04

If you want to improve your rear view, this is the solution for you. Mounts betweens the stock mirrors and adapters.

600.12.020.100

601.12.924.000

03 – 11

ALUMinUM CASE 38 L

CASE CARRiER SYSTEM

Durable, water-proof individual bags made of 1.5 mm aluminum without edge welding seams. Rounded constrution with robust plastic protectors on the corners. Can be used

Rigid steel tubular construction for mounting of all available case sets. Simple installation, without any modification of the passenger foot pegs, perfect

on right and left sides. Fits the luggage rack system 600.12.020.100 (not included). Two locking mechanisms with articulation function for the cover, locking eyelets on the top and

load distribution on the existing mounting points on the chassis.

mounts for additional locks. Capacity: approx. 38 liters; 44 x 24 x 39 cm – Inside Pocket = 600.12.025.060.

600.12.027.450 BRACKET FOR TOpCASE For top case 600.12.027.400 and 600.12.027.400/30.

top case can be mounted directly on the original installed parts. Size: 58 x 42 x 31 cm.

950 / 990 SUpERMOTO »

950 / 990 ADVEnTURE »

101

950 / 990 ADVEnTURE »

103

950 / 990 ADVEnTURE »

105

626.08.050.000 / 20A 990 SM T 10 – 11 601.12.178.000

SpOiLER whiTE LEFT

ZippER LOCK Avoids thieves' quick entry to your luggage! For use on 62612019000, 62612019100, 60012078000, 60012078100, 62012025100, 62512019200, 60112078000, 62512025000 and 75012019100.

Quicklock carrier system – quick mounting and dismounting – Luggage rack is blended into the stock appearance – Lockable

626.08.051.000 / 20A 990 SM T 10 – 11 SpOiLER whiTE RiGhT Note: The white of the PowerParts spoiler is not identical to the white of the 2011 white SM T!

990 SM T 990 SM R

BLACK ALUMinUM CASE RiGhT These new style travel cases are made of two ultra strong materials. The sidewalls are made of high strength

10 – 11 10 – 11

qUiCKLOCK CARRiER SYSTEM / ADVEnTURE CASE

10 – 11 10 – 11

03 – 11

601.12.024.060

601.12.020.200

990 SM T 10 – 11 990 SM R 10 – 11

SiDECASE CARRiER BELT Adding this belts to your side cases, you can easily take them with you in the hotel room or your tent.

03 – 11 qUiCKLOCK CARRiER KiT / BLACK ALU CASE This kit contains the quicklock carrier system (which stays on the bike) and the adapter for our KTM Adventure cases (which can be removed

ERGO SEAT

within seconds from the bike). Cases are not included, please order seperately! With removed adapters you will nearly not recognize that you have mounted a carrier system on your bike for fullsize cases!

aluminum and the corners are made of impact-resistant plastic parts. The components are vary durable and waterproof bonded by a specially developed riveting technology!

601.12.920.000

Volume of each case is app. 37 L. To secure your luggage an additional lock kit 60112023050 (includes 4 locks for

LOCK FOR qUiCKLOCK CARRiER ER SYSTEM Locks your Quicklock carrier system on your bike.

both cases) is available. To secure side cases and top case, please order the lock kit 60112023150 (includes 6 locks). Optional inside pockets available: 60112024070.

BLACK ALUMinUM TOp CASE

EXTEnDED CARRiER pLATE Perfect for fixing the roll bag.

03 – 11

UniVERSAL VERSAL REAR BAG / BACK pACK This new designed bag can be used as rear bag on the carrier plate of the bike, or as a backpack. By using the circular zip, the volume can be increased very simply. The bag offers a raincover, an additional storage room for small items and rubber straps on

Completely water proof duffle bag that can be rolled up for flexible volume. Includes attachment straps and shoulder strap. Great for keeping clothes and camping equipment dry!

601.12.092.050

600.12.027.252

03 – 08

BACKREST FOR TOpCASE 37 Available as an optional extra, offers the passenger more comfort.

950 / 990 ADVEnTURE »

990 SM T 10 – 11

601.12.920.000

601.12.024.070

LOCK FOR qUiCK LOCK CARRiERSYSTEM Locks your Quicklock carrier system on your bike.

innER TRAVEL BAG Keep your contents organized with this high quality, multi compartment travel bag. For use with the Black Aluminum Luggage.

950 / 990 ADVEnTURE »

600.30.086.000

600.30.085.000

03 – 11

CARBOn CLUTCh COVER pROTECTOR Effective protection against stones, Made from Carbon-Kevlar.

CARBOn iGniTiOn COVER pROTECTOR Effective protection against stones, Made from Carbon-Kevlar.

601.12.092.140

03 – 11

Universal application possibilities for mounting the GPS holder.

can be used with almost all models, there is a special edition (601.12.092.050 or 601.12.092.150) for the

(601.12.092.070), which can be used with almost all models, there is a special edition (601.12.092.050 or 601.12.092.150) for the 950/990 Adventure whereby the navigation system is ideally positioned on the bike.

BLACK ALUMinUM TOp CASE 38 L volume. Optional inside pockets available: 601.12.027.070.

601.12.927.044 BRACKET FOR TOpCASE For Topcase 37, 46 and rear bag 600.12.078.000, 600.12.078.100 and Topcase 601.12.027.000.

100

101

950 / 990 ADVEnTURE »

107

600.05.099.300

601.05.099.000 03 – 11 TiTAniUM SiLEnCER SET Save weight, add more torque and a pleasant exhaust note to your Adventure with this carbon tipped slip-on silencer set. Includes

601.12.092.080

03 – 11 SUppORT FOR GpS BRACKET

601.12.027.000

602.12.092.060

UniVERSAL pLUG Necessary for the modification of the power supply cable of the navigation system to be able to fit with the socket 620.11.042.044.

620.10.965.118

620.12.092.044

09 – 11 MOUnTinG FOR GpS BRACKET Necessary for mounting the GPS holder.

950/990 Adventure whereby the navigation system is ideally positioned on the bike.

601.12.178.000

600.12.025.060

ZippER LOCK Avoids thieves' quick entry to your

inSiDE pOCKET 35 L The clever option to the aluminum suitcase system. Whether you're staying in a tent or a hotel: your luggage is always close at hand.

luggage! For use on 601.12.078.000, 600.12.078.100, 600.12.019.100 and 600.12.078.000.

601.29.074.050

600.12.078.100

600.12.027.352

REAR BAG Bag with Quick-Lock System for easy mounting.The volume of the bag is between 12 and 18 liters variable. The bracket 600.12.027.550 is also necessary for correct mounting.

600.07.213.050

600.30.060.000 / 49

03 – 05

03 – 11

CARBOn TAnK pROTECTOR Super light Carbon / Kevlar protection.

CARBOn FROnT ChAin GUARD 32% weight reduction.

600.12.073.044

601.12.092.070

03 – 11

03 – 08

03 – 11

hAnDLEBAR SUppORT FOR GpS BRACKET Universal application possibilities for mounting the GPS holder. Can also be used for other models.

102

103

950 / 990 ADVEnTURE »

SXS.05.450.220

600.30.126.200

109

600.13.003.100

03 – 11 GpS BRACKET FOR GARMin ZUMO 660 With this elegant lockable construction, your navigation system can be mounted on your motorcycle so that

with the charging cable and the starter battery gets charged. Very simple, but ingenious.

which can be used with almost all models, there is a special edition (601.12.092.050 or 601.12.092.150) for the 950/990 Adventure whereby the navigation system is ideally positioned on the bike.

780.09.099.000 765.09.099.000

770.13.920.000

03 – 11

CnC h YDRAUL YDRAULiiC CLUTCh CLUTC COVER CNC-machined version made of high-strength aluminum.

CnC CLUTCh COVER High quality CNC-machined outer clutch cover with factory look. Made of high-strength aluminum.

CnC hAnD BRAKE CYLinDER COVER CNC-machined design made of high-strength aluminum.

03 – 11 RiM STiCKER SET Orange or black colored, ready cut sticker for adding on front and rear rim.

601.12.092.040 03 – 11

601.11.042.044 03 – 06

it does not vibrate. As well as the classic fastening on the handlebar cross member (601.12.092.070),

104

690 LC4

OUTLET KiT Necessary for models 03 – 06 when a source of power is needed for a navigation system or for any other use.

105

584.10.051.048 / 04

111

772.30.002.060 / 04 03 – 11 FACTORY iGniTiOn COVER pLUG

600.05.099.000

03 – 11

TiTAniUM SiLEnCER SET 59% lighter slip-on silencer that will also add power when compared to the series production exhaust. Includes removable sound reduction inserts. For off-road use only.

601.10.051.042 / 04 601.10.051.045 / 04

Z42 Z45

SpROCKET If you think a steel sprocket is too heavy and an aluminum sprocket wears out too quickly then we have the perfect sprocket for you! A steel outer chain ring combined with an inner aluminum carrier combines the best of both worlds to create a light weight long lasting sprocket. This not only increases rear sprocket life but also the front sprocket and chain life for up to 3 times compared to normal sprockets. If you are looking for the highest quality sprocket available and one that matches the image of your KTM your search is over!

removable sound reduction inserts. For off-road use only.

602.12.092.060

UniVERSAL pLUG Necessary for the modification of the power supply cable of the navigation system to be able to fit with the socket 601.11.042.044.

601.12.092.180

07 – 11 ChARGinG CABLE Special charging cable for the 990 Adventure. Connect the battery charger 58429074000 and the stock outlet

helmets. It features the latest generation snap-shut locking mechanism. It boasts an extremely smart design with great personality. For mounting you also need the bracket 601.12.927.044. Size: 58 x 42 x 31 cm.

950 / 990 adventure

601.12.092.150

MOUnTinG FOR GpS BRACKET Necessary for mounting the GPS holder.

the top to fix a jacket, gloves, etc.

990 SM R 10 – 11 TOURinG-winDSCREEn We recommend the touring windscreen for longer trips.

FOR 600.12.025.100 / 30

601.12.025.200

ROLLBAG

756.12.978.000

626.08.065.000

38L volume. Optional inide pockets available: 601.12.027.070

600.12.025.090

601.12.978.044

SiDECASE CARRiER BELT Adding these belts to your side cases, you can easily

BLACK ALUMinUM CASE RiGhT These new style travel cases are made of two ultra strong materials. The sidewalls are made of high strength aluminum and the corners are made of impact-resistant plastic parts. The components are vary durable and water-proof bonded by a specially developed riveting technology! Volume of each case is app. 37 L. To secure your luggage an additional lock kit 60112023050 (includes 4 locks for both cases) is available. To secure side cases and top case, please order the lock kit 60112023150 (includes 6 locks). Optional inside pockets available: 60112024070.

601.12.078.000

601.12.024.060

take them with you in the hotel room or your tent.

601.12.025.200

600.12.019.100

601.12.027.000

LUGGAGE hOOK SET

BLACK ALUMinUM CASE LEFT

qUiCKLOCK CARRiER KiT / ADVEnTURE CASE 620.07.040.100

BLACK ALUMinUM CASE LEFT

601.12.024.200

601.12.020.100

TOURinG winDSCREEn We recommend the touring windscreen for longer trips. 601.12.024.200

601.12.025.200

of 37 liters is using the practical press-lock-system. The bracket 601.12.927.044 is also necessary for correct mounting. Size: 49 x 40 x 31 cm.

990 SM T 10 – 11

OUTLET KiT Necessary when a source of power is needed for a navigation system or for any other use.

620.12.020.100

990 SM T 990 SM R

TOpCASE 37 This topcase with an internal volume

950 SM 06 – 07

620.08.965.000

990 SM T 10 – 11

throughout, with robust metal locks on the tops and sides. Capacity: approx. 2x32 liters; 48x27x36 cm. Inside pocket : 600.12.025.060

620.12.020.200

600.12.027.500 625.07.040.100 / 30

ERGO SEAT Gel insert increases comfort especially on long trips. Not useable for R-Version.

106

600.13.059.200

600.13.030.100

610.04.037.050

620.02.903.000

620.02.903.050

620.02.903.150

03 – 11

SUpp SU ppORT ORT FOR Gp Gp S / p DA BAGS

03-11

03-11 GpS / p DA BAG LARGE Dimensions: 170 x 130 x 35 mm.

BRAKE pADS FROnT Sintered brake pad with the best price/performance ratio. Will help reduce brake noise. Should be not mounted on bikes with ABS System.

SwinGARM BOLT COVER SET

GpS / p DA BAG SMALL Great travel bag to help keep electronics dry and shock secured. Dimensions: 140 x 90 x 35 mm.

CnC FOOT BRAKE CYLinDER COVER CNC-machined version made of high-strength aluminum.

For mounting on the stock handlebar supports!

107

108

600.35.040.100 03 – 11 ALUMinUM RADiATOR pROTECTOR GRiLL Black-coated aluminum, for better cooling.

109

110

111

OVERViEw »

165

690 LC4 »

113

690 LC4 »

115

756.04.050.000 / 49

690 LC4 »

117

690 LC4 »

131

690 LC4 »

133

690 LC4 »

135

765.06.102.000

DUKE

EnDURO / SMC

CARBOn hUGGER

756.05.099.000 DUKE

TUninG-KiT EVO 1 Stage 1 tuning kit containing the open air filter cover. Note: For proper performance the special map

EVOLUTiOn TiTAniUM SiLEnCER

600.12.025.060

620.02.903.000

This exhaust system is specially developed for the Duke. This means light weight and maximum performance gains. Mounting only possible in combination

must be used. For closed course use only.

inSiDE pOCKET 35 L The clever option to the aluminum suitcase

SUppORT FOR GpS S / p DA BAGS

with the factory header 756.05.907.000. For closed course use only.

For mounting on the stock handlebar supports!

system. Whether you’re staying in a tent, or hotel: your luggage is always close to hand. 601.12.929.000

765.12.945.000 EnDURO / SMC

756.08.010.000 / 49 DUKE

TUninG KiT EVO 1 COMpLETE Stage 2 kit contains the high performance exhaust

CARBOn FROnT FEnDER

system matched with the open air filter cover for solid performance gains. Note: For proper performance the

756.05.907.100

600.12.078.100

756.12.978.000

DUKE

SM / DUKE / SMC / EnDURO

UniVERSAL REAR BAG / RUCKSACK

TiTAniUM FACTORY hEADERS

765.05.991.000 / 49

EnDURO / SMC

765.05.990.050 / 49

EnDURO / SMC

SLipOn TiTAniUM SiLEnCER 765.05.907.100 EnDURO / SMC

CARBOn CEnTER hEAT pROTECTOR For mounting on original Exhaust, but also for

Header 765.05.907.100. On 690 SMC also useable for the stock header.

use on Akrapovic Header 765.05.907.100 and Silencer 765.05.099.000.

The system comes with the hexagonal design muffler, which goes great with the sharp lines of your KTM. Removeable spark arrestor

CARBOn REAR hEAT pROTECTOR For Mounting on original Exhaust, but also for use on Akrapovic Header 765.05.907.100

SM / SMC / DUKE / EnDURO CARBOn CLUTCh COVER pROTECTiOn

112 690 LC4 »

119

EnDURO / SMC

620.02.903.050

620.02.903.150

GpS / p DA BAG SMALL Great travel bag to help keep

Dimensions: 170 x 130 x 35 mm.

GpS S / p DA BAG BiG

750.08.065.044

756.12.945.000

combination of aluminum outer sleeve and stainless steel endcap guarantees low weight and good durability. For closed course use only.

EnDURO / SMC

DUKE

TUninG KiT EVO 2 COMpLETE

TUninG KiT EVO 1 COMpLETE

Like 765.12.945.200 with additional

Like 756.12.945.100 with additional exhaust system.

756.08.065.100

SLip-On ALUMinUM SiLEnCER

765.12.945.100

exhaust system.

113

TOOL BAG

compartments. For mounting on the luggage rack.

electronics dry and shock secured. Dimensions: 140 x 90 x 35 mm.

765.05.099.200

special map must be used. For closed course use only.

Slip-on Silencer with very nice cost- performance ratio. The

750.30.026.050 / 49

SM / SMC / DUKE / EnDURO CARBOn iGniTiOn COVER pROTECTiOn

filter, revised racing cam shaft and filter mounting kit. For maximum performance, the Akrapovic exhaust system should be used with this kit. Note: For proper performance the

map must be used. For closed course use only.

and Silencer 765.05.099.000. 750.30.045.050 / 49

TUninG-KiT EVO 1 Give your 690 engine additional performance with the KTM EVO 1 engine kit. This kit includes a K & N cone style racing

N cone style racing filter, revised racing cam shaft and filter mounting kit. For maximum performance,

EnDURO / SMC

included. Mounting possible with original header and also with the factory header 76505907000. For closed course use only.

583.12.078.000

REAR BAG Well thought out rear bag for all LC4 models with many small

DUKE

TUninG KiT EVO 2 Give your 690 engine additional performance with the KTM EVO 2 engine kit. This kit includes a K &

the Akrapovic exhaust system should be used with this kit. Note: For proper performance the special 765.05.990.060 / 49

for the finest available aftermarket exhaust systems and know how to get the most out of the increased performance on the track.

584.12.078.000

756.12.945.100

EnDURO / SMC

CARBOn FROnT hEAT pROTECTOR Only for use on Akrapovic Titanium Factory

TiTAniUM FACTORY hEADERS The Akrapovic system is designed for KTM riders who are looking

increased very simply. The bag offers a raincover, an additional storage room for small items and rubber straps on the top to fix a jacket, gloves, etc.

The bracket 750.12.027.150 or 765.12.027.050 is also necessary for correct mounting.

765.12.945.200 765.05.099.000

This new designed bag can be used as rear bag on the carrier plate of the bike, or as rucksack on the riders back. By using the circular zip, the volume can be

REAR BAG Bag with Quick-Lock System for easy mounting. The volume of the bag is between 12 and 18 liters variable.

special map must be used. For closed course use only.

ALUMinUM TOpCASE pCASE 38 L Size approx: 31 x 40 x 30 cm.

765.08.065.000

DUKE

EnDURO / SMC

TOURinG winDSCREEn

We recommend the touring windscreen for longer trips.

We recommend the touring

TOURinG winDSCREEn We recommend the touring

windscreen for longer trips.

750.12.027.150

765.12.027.050

765.12.090.044

SM / DUKE

EnDURO / SMC

EnDURO

BRACKET FOR TOpCASE For Top case 37, 46 (page 97) and rear bag

BRACKET

ROADBOOK CARRiER

A LUM LUMin inUM UM CASE 38 L

For rear bag 600.12.078.000, 600.12.078.100. For mounting you need the suitcase carrier system

Change your 690 Enduro into a Rally. Stable construction for racing use. For mounting the roadbook carrier

Durable, water-proof individual bags made of 1.5 mm aluminum without edge welding seams. Rounded constrution with robust plastic protectors on the corners.

765.12.020.000, or the original provided handhold.

600.12.073.000 the wiring harness 765.12.090.090 and remote control 600.12.073.080 are also required.

Can be used on right and left sides. Fits the luggage rack system 765.12.920.000 (not included). Two locking mechanisms with articulation function for the cover,

600.12.078.000.

114

765.12.920.000

601.12.924.000

locking eyelets on the top and mounts for additional locks. Capacity: approx. 38 liters; 44 x 24 x 39 cm – Inside Pocket = 600.12.025.060.

115

690 LC4 »

121

116

117

690 LC4 »

123

130

131

690 LC4 »

137

132

133

690 LC4 »

139

601.12.078.000

601.12.178.000

ROLL BAG Completely water proof duffle bag that can

ZippER LOCK Avoids thieves' quick entry to your luggage! For use on 750.12.019.100, 601.12.078.000, 600.12.078.100

be rolled up for flexible volume. Includes attachment straps and shoulder strap. Great for

and 600.12.078.000.

keeping clothes and camping equipment dry!

to the existing mounting points on the chassis.

134

135

690 LC4 »

141

SXS.07.125.200 765.01.099.025 / 04

750.01.099.033 / 04

SXS.05.450.220

765.13.903.000

586.13.003.100

SM / DUKE

SM / EnDURO / SMC

EnDURO

SM / SMC

CnC CAp CLUTCh RESERVOiR CNC machined design made of high-strength aluminum.

CnC hYDRAULiC CLUTCh COVER CNC machined design made of high-strength aluminum.

CnC hAnD-BRAKE CYLinDER COVER CNC machined design made of high-strength aluminum.

EnDURO / SMC

EnDURO

SM / DUKE

CNC machined. Easy adjustable offset 30.5 mm or 33.5 mm. Front wheel and Fork does not need to be removed for changing the offset. Set includes pivot tube und lower bearing. When using the offset 33.5 mm the steering lock is not useable. For mounting of the handlebar you need one of

REAR FEnDER

EnDURO / SMC

SiDEFAiRinG

SpOiLER L = Left, R = Right.

601.12.092.070 or on the roadbook carrier 582.12.090.144 you also need for mounting 600.12.173.070.

phDS pROGRESSiVE hAnDLEBAR DAMpinG SYSTEM

L = Left, R = Right.

(B)

(A)

EnDURO / SMC 780.08.001.000 / 30 780.08.001.000 / 04 EnDURO R

765.14.901.044 EnDURO / SMC

750.38.050.044

X2 LiGhT The X2 Halogen lighting system features a high quality 4" driving lamp and 2" spot lamp to turn night into day! This self contained

– Individual set-up possible due to the selection of different damping elements supplied. – CNC-milled.

765.01.199.035 / 04

765.08.001.000 / 30 765.08.001.000 / 04

hEADLiGhT MASK

– Vibrations from chassis and engine absorbed. – Handlebars additionally damped in horizontal direction. – Optimal steering precision. – Handlebar height adjustable in two positions. – Protects the hand and shoulder joints.

the three below listed handlebar supports.

EnDURO / SMC

765.08.050.000 / 30 L 765.08.050.000 / 04 L 765.08.051.000 / 30 R 765.08.051.000 / 04 R

Advantages: – Headshake and hard hits dampened.

CnC C TRipLE TR CLAMp Offset 22.5 or 25.5 mm.

CnC TRipLE CLAMp 610.02.055.060

765.08.041.000 / 30 L 765.08.041.000 / 04 L 765.08.042.000 / 30 R 765.08.042.000 / 04 R

765.08.013.000 / 30 765.08.013.000 / 04

SMC

SM / DUKE

EnDURO / SMC

OiL COOLER SET

FOAM AiRFiLTER

SM / DUKE

780.11.909.100 / 30

780.01.094.100 / 04

780.01.094.100 / 30

EnDURO R

EnDURO

hEADLAMp GRiD

FORK pROTECTiOn SET

FORK pROTECTiOn SET 765.08.999.000

EnDURO

K&n AiRFiLTER

5200.0024 5200.0090 5200.0091

EnDURO / SMC

773.08.210.000 / 30 773.08.210.000 / 04

Increases airflow for more power and washable for extended service life. Works great when combined with the factory exhaust system.

indicated in the green area.

SXS.05.450.200

765.08.010.000 / 30 765.08.010.000 / 04

750.06.115.100

Specially developed for riders who use their Supermoto / Duke on the race track. Thereby the oil temperature is always

lighting system is great for upgrading your stock lighting. Meets DOT approval standards. Comes with a black mask but a orange headlight mask (780.08.907.000/04) is also available.

CnC C TRipLE TR CLAMp Offset 32.5 or 35.5 mm.

765.06.115.000

GRAphiCS KiT T BLACK Not useable for Enduro R.

SMC

BAR EnDS

780.02.979.000 / 28 780.02.979.000 / 04

602.02.179.000 / 28 602.02.179.000 / 04

hAnDGUARDS

ALL USD FORKS 43 MM (A) ALL USD FORKS 48 MM (B) ALL USD FORKS 48 MM (C)

FORK pROTECTiOn STiCKER SET Extra thick material, protects your fork against stones.

Eliminates the need to replace ripped-up grips

765.08.010.100 / 30 765.08.010.100 / 04

SXS OiL pLUG CNC machined aluminum.

548.02.005.000

whenever your machine kisses the ground.

EnDURO R FROnT FEnDER

548.02.001.300 / 04 594.01.039.044 594.01.039.144 SXS.08.300.040

611.01.039.044 / 30

SM / DUKE

SM / DUKE / SMC / EnDURO

hAnDLEBAR SUppORT

CnC CAp BRAKE-FLUiD RESERVOiR

CnC KnOB ADJUSTER SET CNC machined aluminum.

610.13.009.100

CNC machined design made of high-strength aluminum.

37 mm 47 mm

EnDURO / SMC

595.01.039.244 EnDURO / SMC

EnDURO / SMC hAnDLEBAR SUppORT Available in two different heights.

ORAnGE hAnDLEBAR Laser etched positioning grid. Made for KTM exclusively by

FACTORY hAnDLEBAR SUppORT Three possible height adjustments,

601.12.092.070 hAnDLEBAR SUppORT FOR GpS BRACKET For GPS brackets page 105.

118

119

690 LC4 »

125

765.07.008.060

772.30.002.060 / 04

SM / DUKE / EnDURO / SMC

EnDURO / SMC

SM / DUKE / SMC / EnDURO

OiLFiLTER CAp CNC machined design made of high-strentgh aluminum, orange anodized.

FOAMRUBBER FOR TAnKCAp Prevents dirt and mud from falling

FACTORY iGniTiOn COVER pLUG

into the tank when refueling.

750.38.041.100

Renthal. 604 Bend 28.5 mm large diameter clamping area. Dimensions: A: 99 mm; B: 802 mm; C: 54 mm.

28 mm, 37 mm, 46 mm.

120

121

690 LC4 »

127

122

123

690 LC4 »

129

590.03.090.250 FOAM To be mounted between engine and skid plate. Thereby, less mud can collect there allowing the engine to cool better.

136

137

690 LC4 »

143

138

139

690 LC4 »

145

765.35.940.000 EnDURO / SMC

140

TOOLS

U695.1087 hUB DECAL KiT

780.09.099.000

765.09.099.000

RiM STiCKER SET 21" / 18" Ready cut sticker for adding on front and rear rim.

RiM STiCKER SET 21" / 18" 611.09.099.000 611.09.099.000 / 20 RiM STiCKER SET 17" Ready cut sticker for adding on front and rear rim.

141

U690.8840

147

RADiATOR pROTECTiOn

770.13.920.100

600.13.030.100

SM / DUKE / SMC

EnDURO

BAnJO BOLT wiTh BLEEDER FUnCTiOn

756.07.040.100

750.12.035.044 SM / DUKE ALARM SYSTEM MOUnTinG KiT 780.01.095.000

613.03.946.044

601.03.923.050 EnDURO / SMC

U691.0017

SM / DUKE

SM / DUKE / SMC / EnDURO

CRAShpAD FOOTpEG Crashpads to be mounted on the passenger footpeg.

nEOpREnE FORK COVER The perfect neoprene protection for your forks, for

ThROTTLE CAM SYSTEM Precision machined aluminum throttle tube with delrin inserts for

SM / DUKE

use with closed fork protection.

smooth throttle action. Includes three updated cam profiles designed to give different throttle response with fuel injected bikes.

ALARM SYSTEM Plug and Play Failsafe twin circuit immobilization. Water and vibration resistant resin bonded construction. Integral movement sensor. Seat is also secured. 2 x waterproof anti-scan, anti-grab

770.13.920.000 SM / DUKE / SMC / EnDURO

ChAin Z RinG The special Z-ring compresses when assembled creating a better seal. This ensures smooth action and longer chain life. 118 link.

750.03.045.000

584.10.051.038 / 04 584.10.051.040 / 04 584.10.051.042 / 04 584.10.051.044 / 04 584.10.051.046 / 04 584.10.051.048 / 04 584.10.051.049 / 04 584.10.051.050 / 04 584.10.051.051 / 04 584.10.051.052 / 04

SM / DUKE / SMC FROnT 750.03.046.100

756.12.962.044

SM / DUKE / SMC

SM / DUKE

REAR

BRACKET FOR U-LOCK The practical solution, to fix the U-lock 600.12.016.000 on your bike. Made of steel. Black powder-coated.

CRASh pADS Will protect your forks/swingarm in the event of a crash.

690.13.950.044 620.14.949.000

and race proven materials. The alloy center is lighter than original rotors and is race track approved. Specially designed for the KTM superbikes this rotor is a great combination of improved performance and visual appeal.

ADApTiVE BRAKELiGhT Add increased visibility on the road. In the event of hard braking, the control unit pulses the rear brake light alerting traffic behind you.

SM / DUKE / SMC / EnDURO

750.03.090.000

765.03.090.100

EnDURO / SMC

SKiD pLATE

SKiD pLATE ALUMinUM

SM / DUKE

ARTiCULATED BRAKE LEVER KiT Lightweight racing lever designed to bend away in case of a spill. Fully adjustable.

ARTiCULATED CLUTCh LEVER KiT Lightweight racing lever designed to bend away in case of a spill. Fully adjustable.

RADiATOR pROTECTiOn

125

126

756.12.918.000

690.34.931.044

750.35.940.000

127

620.12.940.050

SM / DUKE

SM / DUKE / SMC / EnDURO

BRACKET / U-LOCK KiT As 756.12.962.044 but with U-lock 600.12.016.000.

EXTEnSiOnS REAR ViEw MiRROR If you want to improve your rear view, this is the solution for you. Mounts betweens the stock mirrors and adapters.

128

Z38 Z40 Z42 Z44 Z46 Z48 Z49 Z50 Z51 Z52

772.10.965.118

611.09.960.000

wAVE AVE BRAKE DiSC D 320 MM Stainless floating disc with anodized orange center provides consistent brake performance under extreme conditions. Even at the highest temperatures the outer disc does not bend or warp due to the advanced design

583.10.051.038 583.10.051.042 583.10.151.040 583.10.151.045 583.10.151.048 583.10.151.049 583.10.151.050 583.10.151.051 583.10.151.052

503.10.800.118 / 04 5/8 x 1/4 (520)

Z38 Z42 Z40 Z45 Z48 Z49 Z50 Z51 Z52

580.33.029.014 580.33.029.015 580.33.029.016 580.33.029.017

Z14 Z15 Z16 Z17

5 / 8 X 1 / 4 (520)

750.12.019.100

765.07.940.000

SM / DUKE / SMC / EnDURO

EnDURO

ERGO SEAT New developed seat foam adds all day comfort. Height is similar to stock.

waterproof innerbag. Finished with extra robust zipper closures. Total volume approx. 22 liters.

129

ChAin BLACK SCALE The Black Scale chain by RK is a performance chain that combines great technical features with an exclusive appeal coming from its black hard coated plates with brassed pins and rollers. 118 link.

142

U695.1067 U695.1068 U695.1069 U690.6815 U695.1070 U690.6816 U695.1071

548.03.047.000

548.03.040.000

548.03.040.050

SM / DUKE / SMC / EnDURO

ADJUSTABLE FOOTREST These footrests offer a wide range of adjustability. They can be tilted 5 degrees forward or backward, and they can be raised or lowered by 6mm.

FOR 548.03.040.000

FOOT-pEG SLiDERS Fiberglass reinforced plastic material, fits on all bikes with foot peg numbers 590.03.041.250 right and 590.03.040.250 left.

FROnT SpROCKET

REAR SpROCKET High strength aluminum, extra light.

DUKE

124

SM / DUKE ERGO SEAT LOw Duke: Height identical to standard seat / Supermoto: – 20 mm.

rolling code remote transmitters. Lithium transmitter battery (3 year life).

BRAKE BLEEDER SCREw

bleeder screw. Changing the brake fluid or bleeding the system is done in seconds. Comes with anodized mud cap. 770.13.920.000 for rear brake calipers SM 0709, SMC 08-10, Duke 08-10 and front and rear brake caliper Enduro 08-11. 770.13.920.100 for front brake calipers SM 07-09, SMC 08-10 and Duke 08-10.

750.07.040.100

SM / DUKE ERGO SEAT MiD Duke: + 20 mm / Supermoto: Hight identical to standard seat.

STAnD pLATE BiG With this bigger stand plate your bike stands really safe, even on soft ground.

600.12.035.100

Z41 Z44 Z48 Z49 Z50 Z51 Z52

REnThAL SpROCKET Made exclusively for KTM by Renthal, these orange anodized rear sprockets are used by the KTM Race Teams. Lightweight, durable and provide great performance.

SLiDERS FOR ADJUSTABLE FOOTREST SET

780.03.940.144 SMC / EnDURO

582.10.051.042 582.10.051.045 582.10.051.048 582.10.051.050

Z42 Z45 Z48 Z50

SXS.08.125.610 BLEEDER VALVE SET Specially for WP Fork designed bleeder valves, allowing quick and accurate removal of built up, unwanted air inside your fork legs.

REAR SpROCKET STEEL Very durable, recommended for long trips.

and performance, this sprocket will meet your demand.

143

144

145

146

147

OVERViEw » TOOLS »

167

149

610.29.055.400

610.29.055.110

610.29.055.120

610.29.055.130

950 / 990 ADVEnTURE 990 SUpER DUKE 950 / 990 SM RC8 690 SM / DUKE / EnDURO / SMC

SET OF RUBBER A ADApTERS

wORKShOp ADApTERS

SET OF FORK ADApTERS wiTh BOBBinS

TOOLS »

151

595.12.030.100

153

595.12.030.000

772.31.997.000/04

EXhAUST pLUG

E X h AUST p pLUG LUG

VEnT hOSE

Keeps water out of the silencer when cleaning, for 40 – 62 mm inner diameters.

Keeps water out of the silencer when cleaning, for 15 – 38 mm inner diameters.

625.12.007.000

590.12.007.000

pROTECTiVE COVER inDOOR No chance for dust, or unwanted scratches etc to damage your bike, thanks to the KTM indoor bike cover which makes

pROTECTiVE COVER OUTDOOR Strong, lightweight bike cover that is UV and water resistant. The sewn in elastic band

your bike an eye-catcher in the garage aswell. The cover is made from a special fabric with a distinctive structure that

along the bottom keeps the cover secure to the bike. Great for travel, this cover folds

does not allow dust or condensation to pass through. The inner-side has a soft lining.

up small into the supplied carrying case.

Petrol resistant, perfect for tank and carburetor ventilation. Approx. 3 meters long. Should not be used as supply line.

U695.1099

REAR whEEL STAnD For using the rear stand, you also need

TiRE GAUGE 0-60 PSI, This accurate gauge is a must have for

one of the three possible adapter kits.

every KTM tool box. Features a stainless steel braided line, rubber coated exterior and a pressure release button.

584.29.074.100

U690.9801

BATTERY ChARGinG AnD TESTinG UniT

BATTERY Ch Ch ARGER

Test, charge and store batteries: a fully automatic and protective battery charger thanks to a programmed charging characteristic.

Battery charger with test function. Further functions: – Constant current charge,

The well arranged LC-Display shows the charge state, reverse polarity protection, short-circuit-protection, overload protection;

– Constant voltage charge, – Float charge.

absolutely simple and safe. Plug for USA: 58429074004.

Includes cable to fix on the battery with quick plug to be connected to the charger.

Pit mat

451.29.075.000

U6909.852

REV METER Usable on 4-stroke and 2-stroke engines,

TiRE wARMERS Temperature Adjustable with Solid State Micro-Processor

displays up to 16,000 rpm.

and Digital Display. See actual tire temperature while the warmer runs. Most accurate available on the market. Temperature set point is changed with the push of a button - range up to 212 degrees F. Use higher temps to get ready

compounds. Soft carrying tote from Ogio. Foam filled hard case for the digital controllers.

RC8 FROnT hEADSTOCK STAnD As 610.29.055.500 with additional location bolt

U695.1409

600.12.016.000

812.12.016.000

pLASTiC DRUM KTM orange plastic drum for race purpose.

hiGh SECURiTY U-LOOK Double closing U-type lock. Hardened steel body. 7 pin tubular lock, drill

wASh CAp FUEL hOSE OSE These wash caps cover the quick release connectors of the fuel

Complete with flexible hose and twist-on cap. Approximately 18 liters volume. In some

protected, complies with best standards, 250,000 key variations, increased resistance to picking, supplied with 2 keys. Rotative PVC lock protector.

supply line. This allows you to remove your tank for service and

An easy way to keep track of those bolts when maintaining your KTM. Features a strong

keep your fuel supply line clean.

magnetic bottom with a rubber coating.

countries it is not allowed to use the drum for transportation of fuel or to store fuel indoors.

Hardened steel shackle, resists hacksaws and boltcutters. Corrosion protection by electrical deposit treatment, PVC coated. Tensile strength superior to 12 tons.

U695.1562

to hit the track & lower temps for saving Heat Cycles in between track sessions. Safely heat rain tires and different

– Factory look for your pit

610.29.055.600

TOOLS »

MAGnETiC BOLT pAn

610.29.055.610, specially for RC8.

610.29.055.500

610.29.055.300

950 / 990 ADVEnTURE 990 SUpER DUKE 690 SM / DUKE FROnT hEADSTOCK STAnD Front headstock stand should only be used when rear wheel stand is already mounted.

610.29.055.244

RC8 990 SUpER DUKE 950 / 990 SM 690 SM / DUKE / SMC 640 DUKE

950 / 990 ADVEnTURE 990 SUpER DUKE 950 / 990 SM RC8 690 SM / DUKE / EnDURO / SMC

FROnT hEADSTOCK STAnD Including fork adapters, front wheel stand should only be

BOBBinS FOR REAR whEELSTAnD

780.12.006.000 piT MAT At many races already a must in the service zone! This mat helps with finding fallen tools, bolts and other small parts when service your KTM in the pit area. Due to the special material mix, it features perfect protection against environmental pollution when quick fueling during the race. The KTM design brings perfect factory look to your service- and fuel zone. Dimensions: 160 x 100 cm.

used when rear wheel stand is already mounted.

U695.1277

U690.8840

U695.1439

U695.1130

FOLDinG BiKE RAMp This lightweight KTM bike ramp is the best one we have

SChRADER VALVE CAp SET

VALVE CAp SET

Orange anodized cap with schrader valve removal tool.

ORAnGE CABLE TiES 100 pieces, length: 20 cm.

tested for daily use. This folding ramp is made of a high strength aluminum, and designed for reliable easy use. The ramp also incorporates a safety strap, when used properly, keeps the ramp from sliding forward when

773.29.068.000

773.12.030.000

TiRE GAUGE DiGiTAL Comfortable and easy to use. Fits all currently

FOOT-AiRpUMp Mini-footpump with pressure gauge on the swivelling valve

available valves. Pressure display in bar or psi. Integrated pressure release valve for

head that fits all prevalent valves. Integrated doublecylinder with pressure switch-over to high pressure. Max. 12

accurate pressure adjustment. Switchable display and work area lighting. Battery saver

bar/160 psi. Height: approx. 170 mm folded together.

590.29.050.000 FUnnEL Specially designed to suit KTM fuel tanks. This funnel has an optimised diameter to

mode by means of automatic switch-off. Max. measurable pressure 11 bar / 154 psi.

you are loading and unloading your bike. Total length is ~200 cm, folded its ~100 cm. Weighs less than 5,5 kg.

suit two different filler necks and also has an integral groove for perfect ventilation

148

149

TOOLS »

155

150

151

TOOLS »

157

583.10.025.000 AXLE GAUGE

503.05.017.000 / 04

590.29.041.000

U695.1126

000.29.098.200

U695.1188

SpRinG hOOK

0,10; 0,12; 0,15; 0,20; 0,25.

SpOKE TORqUE wREnCh Avoid the common problem of overtightening your spokes.

SCREw DRiVER SET High quality 5 piece screw driver set in KTM design.

CLEAninG KiT Everything you need to keep your KTM looking showroom clean. Kit includes

Easy spring removal.

590.29.041.100 0,05; 0,10; 0,15; 0,20; 0,25; 0,30; 0,35.

This wrench is preset and lets you know when your spokes are properly tensioned.

510.12.093.000

U695.1045

TiRE iROn LOnG

TiRE iROn SET

U691.0046

610.12.016.000

601.12.002.000

SOFT TiE DOwnS These tie-down straps have soft ties built in, so

BRAKE LOCK The assistance for loading the bike, or

TRAnSpORT hARnESS STREET This transport harness allows a safe handlebar connection point

you don’t scratch your bars. KTM orange / black with distinctive KTM Racing markings.

lifting it with the rear wheel stand.

and moves the anchor point away from expensive body panels. Together with one of the soft tie down sets, the bike is perfectly secured on the way to the next race track. Harness features robust plastic cups with rubber inlet to avoid damages to the handlebar.

a 5 gallon KTM bucket, mud scraper, 1 liter spray bottle of Motorex Moto

FEELER GAUGES

Clean 900, 15 mm x 38 mm exhaust plug, sponge, and a quick-dry towel.

U695.5037 510.12.092.000 TiRE iROn SMALL Special Tire lever optimized for KTM. Short version ideal for the travelling tool kit. Longer version for minimum effort when using.

154

510.12.091.000

579.29.020.000

548.12.061.000

SOFT TiE DOwnS These tough KTM soft ties allow you to strap down

SpOKE wREnCh 6 and 7 mm.

ChA Ch A in BREAKER

wiRE pLiERS

SAFETY wiRE

your bike without scratching your handlebars or tank. Built from a durable ballistic nylon, they have

5/8 x 1/4.

Safety wire your bike quickly and securely using these specialty pliers.

Required for most road racing. Stainless steel type 302/304 ASTM wire. .025 mm diameter. 1lb.

U690.7854

780.29.062.000 / 30

601.12.919.000

MAGnETiC BOLT pAn

hELMET LOCK AnD DRY BAG This little package includes all you need to secure

With magnetic application, no more lost screws!

your helmet on your bike. Incl. steel cord, number lock and waterproof bag to carry the helmet.

780.29.063.000 MEASURUnG CUp 1000 ML Volume 1 L.. Features scale, perfect for oil change on your bike. Easy handling due to ergonomic form.

during filling.

180 kg max. capacity.

155

a 615 LB weight capacity. Dimensions: 1.5" x 6’.

156

U691.0047

000.29.098.100

SOFT TiE DOwnS wiTh CLipS

T OOLBOX

Our KTM Tie-Downs feature built-in soft tie loops that allow you to secure your KTM without scratching your handlebars. These extra wide webbing units feature a clip hook on one end, plus high quality friction lock

With this 3 / 8" drive tool box small jobs on your KTM can be done quickly and efficiently. Whether it’s changing the plastic parts or carrying out an oil change on your KTM, you’ll find the right tool here. 60-item, orange tool box, high-quality chrome-vanadium

fasteners. KTM Orange/black with distinctive KTM PowerParts markings.

tools. Ratchet (with locking device), clamping bolt, two extensions and socket wrench. Nut spinners from 6 to 24, Allen keys from 3 to 10, Phillips, slotted, as well as Torx bits from 15 to 55.

157

152

153