Exothermic Welding System Manufacturers Offering Advance Jointing Method

Exploring Perfection In Surge Protection Offering

Exothermic Welding System Manufacturers Offering Advance Jointing Method A persuasive earthing system relies upon joints and connections to provide good electrical service with high mechanical endurance. Meagerly set up joints and connectors can kill the secure operation of an earthing system. The traditional method of welding and mechanical jointing is not much productive. A few realistic complications are jointing breakdown because of fewer contact surface area, fading due to meteorological corrosion etc. Hence, exothermic welding has been recommended to provide better joint.

Exothermic contact is used to affix two or more conductors permanently using exothermic reaction to provide molecular bonding. The connection provides 100

Exploring Perfection In Surge Protection Offering % contact surface area unlike mechanical joints. This electrical connection can be made between copper to copper, copper to steel or any other consolidation. The strong connection gives better electrical work and delivers highly effective discharge of current without any leakage.

The exothermic jointing process is more fertile due to several components taking part in the process. The exothermic welding system manufacturer offers: Graphite mold, Welding powder, handle clamp, Flint Gun, Cable Brush, scraper, brush, File card brush. The mold composition is thoroughly depends on the two conductor’s sizing analysis which needs to be welded. It is manufactured from supreme quality graphite, capable to make 80 connections depend upon the nature of joint. An exothermic connection is made with the help of our flammable yet nonhazardous JAM WELD powder. Weld powder is encased in moisture- resistant plastic shell with special closure caps.

Exploring Perfection In Surge Protection Offering

The handle clamp is used to grip the mold tightly at the time of making connections. These clamps are made up of high quality raw material. Flint gun is needed to inflame the starting powder. Cable brush is used for the cleansing of conductors. The healthy molecular bonding provides excellent joint so that an electrolyte cannot enter between the conductors which provide indiscretion to the joints.

Features and Benefits       

It ensures to made by the compliance of IEEE 837 Offers unbreakable molecular bond Negligible possibility of loosing and corrosion Conductivity is plenty higher than the conductors engaged in the process Long standing life performance even after repetition of current flow Joints will not degrade when they get old Immense temperature bearing capacity