With hand injuries among the most common in the workplace, it's essential you have the right gloves for every task. We've expanded our glove selection to offer even more ways to protect your workers' hands, including NEW:
• cowhide leather driving gloves
• cut-resistant gloves
• string knit work gloves
See pages 28-45.
As
WIDE SELECTION
• Sizes
Unique
HIGH QUALITY,
SAFEGEAR®
INVENTORY MANAGEMENT
Use our inventory programs to ensure a consistent supply across all locations.
E-PROCUREMENT SOLUTIONS
We make it easy to find and order what you need while controlling spend.
TABLE OF CONTENTS
SAFETY APPAREL
TYPE R CLASS 2 SAFETY VEST
ALSO AVAILABLE
PPE in Women’s Sizing See pages 22-28. Cooling Products See pages 55-58.
APPAREL
Ensure
Search product code listed above
SAFEGEAR® Class 2 vests are best for working environments that pose a great risk to workers, including those who work on a roadway and may need to turn their attention away from vehicles moving near them. Type R vests are appropriate for workers who are exposed to roadway traffic and those who work in an environment with moving equipment/vehicles.
SAFETY APPAREL
STANDARD AND X-BACK SAFETY VEST
• Type R Class 2
• Meets ANSI/ISEA 107-2015 Standard
• X-Back style also meets Canadian Standards Association (CSA) Z96-15
• Breakaway style features 5-point hook & loop breakaway and additional pockets
2 external lower
BREAKAWAY VESTS
ENSURE THE RIGHT FIT Visit JJKeller.com/SAFEGEAR for size chart.
Factory employees are typically prohibited from wearing loose-fitting clothing or jewelry because it could get caught in moving machine parts and pull the worker into the danger zone. You might have a similar hazard if your workers must wear high-visibility vests around moving equipment on your jobsite. You can’t work safely without the vests, and there are benefits to the vests’ loose-fitting design. The best solution is to use vests that will easily and safely break away from the worker if the vest becomes caught on equipment.
ALSO AVAILABLE
Type R Class 2 T-Shirt with X-Back Search product code: 64773 Visit JJKeller.com/SAFEGEAR
2" silver glass bead reflective stripes
Zipper closure (hook & loop and breakaway also available)
Breathable mesh polyester shell
External chest flapped phone pocket with pen pocket
pockets (lower right pocket with flap fits up to an 8" tablet)
TYPE R CLASS 2 SURVEYOR VEST
• ANSI/ISEA 107-2015 Type R Class 2; X-Back style is also Canadian Standards Association (CSA) Z96-22 compliant
• 2" silver reflective tape on 4" orange goes over the shoulders and around the torso
• Made of durable, breathable polyester
• Zipper closure; 2 upper mic tabs; 4 external pockets and 2 internal pockets
“ In preparation for emergency, good fit, excellent reflective ability.”
SAFETY | WELCH, WV
SAFETY APPAREL
TYPE R CLASS 2 5-POINT BREAKAWAY SURVEYOR VEST
• ANSI/ISEA 107-2015 Type R Class 2 compliant
• Two-tone lime/orange provides optimal visibility; 2" silver reflective tape on 4" orange goes over the shoulders and around the torso
• 5-point breakaway with hook & loop closure on sides, shoulders and front
• 2 mic tabs; 4 outer pockets, 2 internal pockets
TYPE R CLASS 2 SAFETY VEST Available in
LIME 67246 (size Large/XLarge)
Search product code listed above
STANDARD SURVEYOR SAFETY VEST
LIME 59434 (size Large/XLarge)
ORANGE 59438 (size Large/XLarge)
Search product code listed above
X-BACK SURVEYOR SAFETY VEST
TYPE R CLASS 2 VEST WITHOUT POCKETS
• ANSI/ANSEA 107-2020 Type R Class 2 compliant
• Reflective tape on back goes over the shoulders and around the torso
• Lightweight, 100% polyester; zipper closure
• No pockets on vest, eliminates snag points
code listed above
Orange
Orange X Back
SAFETY APPAREL
TYPE R CLASS 2 9-POCKET VEST
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• Reflective tape on back goes over the shoulders and around the torso
• Lightweight, machine washable polyester
• 2 mic tabs
• 9 front pockets, including 1 zipper pocket on front right chest with D-ring
LIME 65123 (size Large)
ORANGE 65127 (size Large)
Search product code listed above
“The quality and speed when ordering these vests with a logo on it is great! PLUS no one will ever complain there aren’t enough pockets on them.”
AUTUMN | SAFETY PROFESSIONAL | INDIANA
TYPE R CLASS 2 TWO-TONE VEST
• ANSI/ISEA 107-2015 Type R Class 2 compliant
• 2" silver reflective tape on 4" orange goes over the shoulders and around the torso
• Durable, breathable polyester mesh
• 1 chest pocket; 1 internal pocket
• Zipper closure
• Machine washable TYPE R CLASS 2 TWO-TONE VEST
LIME 67256 (size Large/XLarge)
Search product code listed above
TYPE R CLASS 2 HEAVY-DUTY VEST
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" reflective tape on 3" orange tape goes over the shoulders and around the torso
• Lightweight, machine washable polyester mesh
• 2 mic tabs
• 2 lower pockets with flap and grommet holes for flagging tape; right chest pencil pocket; left chest pocket with reflective striping; 2 internal pockets
• Zipper closure with webbing reinforcement
ENSURE THE RIGHT FIT
Visit JJKeller.com/SAFEGEAR for size chart.
Orange
SAFETY APPAREL
TYPE R CLASS 2 REVERSIBLE VEST WITHOUT POCKETS
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• Reflective tape on back goes over the shoulders and around the torso
• Reverse vest to plain hi-vis color when working near machines that don’t function when reflective materials are present
• Lightweight polyester; zipper closure
• No pockets on vest, eliminates snag points
REVERSIBLE VEST WITHOUT POCKETS Available in
LIME 65087 (size Large)
ORANGE 65091 (size Large)
Search product code listed above
TYPE R CLASS 2 BLACK BOTTOM VEST
• ANSI/ISEA 107-2015 Type R Class 2 compliant
• 2" ANSI-compliant silver reflective tape on orange ribbon goes over the shoulders and around the torso
• 2 mic tabs; 2 large outer pockets, clear ID pocket, and pencil pocket
• Hole for attaching a fall harness on back
ENSURE THE RIGHT FIT
Visit JJKeller.com/SAFEGEAR for size chart.
PRO TIP:
LIME 62510 (size Large/XLarge)
Search product code listed above
Hole for attaching a fall harness on back
Certified vests are categorized by type and performance class. The three certified types of vests are Type O (off roadway work), R (roadway work) and P (public safety workers). Performance classes are based on the amount of visible retroreflective materials and design attributes:
• Class 1 certified vests have the least amount of visible material but allow workers to be identified
• Class 2 offers increased visibility, providing more definition of the worker’s form
• Class 3 has the most visibility, allowing workers to be recognized in complex work environments.
SAFETY APPAREL
TYPE R CLASS 3 SAFETY VEST
• ANSI/ISEA 107-2015 Type R Class 3 compliant; X-Back style is also Canadian Standards Association (CSA) Z96-22 compliant
• 2" ANSI-compliant silver reflective tape goes over the shoulders and around the torso and arms
• 3 external pockets: lower left with no flap, lower right with flap, and chest with pen pocket; zipper closure
X-Back
63379 (size Large/XLarge)
ORANGE 63383 (size Large/XLarge)
Search product code listed above
X-BACK TYPE R CLASS 3 SAFETY VEST
Available in sizes S/M-4XL/5XL 25-99 $11.85 ea. 10-24 $12.14 ea. 1-9
$12.73 ea.
LIME 67375 (size Large/XLarge)
Search product code listed above
REVERSIBLE FLEECE-LINED WINTER VEST
• ANSI/ISEA 107-2015 Type R Class 2 compliant
• 2" silver glass bead tape over 2¾" orange ribbon goes over the shoulders and around the torso
• Fleece lined, with hand pockets
• Padded collar for comfort and warmth; padded neck to support extra weight in pockets
• 2 mic tabs; hook & loop pockets: 2 on chest, 2 on torso (with vent holes); 2 elastic pockets with hook & loop holders; 1 large zippered pocket on back
(size Large/XLarge)
Search product code listed above
ALSO AVAILABLE
Sweatshirts, T-Shirts and Jackets
See pages 11-21.
Type R Class 2 Vest With Glow-In-The-Dark Safety Tape Search product code: 67250 Visit JJKeller.com/SAFEGEAR
SAFETY APPAREL
PRO TIP: WHY NON-CERTIFIED?
Non-certified safety vests are intended for use where visibility is important but not mandated by OSHA or ANSI Standards. Great for applications such as warehouse/distribution, delivery, parking lot attendants, and related jobs.
NON-CERTIFIED SAFETY VESTS
COLORED SAFETY VESTS
• Use where visibility is important, but not mandated by ANSI Standards
• Red vest is ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" silver reflective tape over contrasting color goes over the shoulders and around the torso
• Durable polyester shell with zipper closure and internal drawstrings for adjustable waist
• Use different color vests to identify visitors, distinguish job responsibilities/areas, and more
• 2 mic tabs; 3 external pockets and 2 large inner pockets
COLORED SAFETY VESTS
77795 (size Large/XLarge)
77799 (size Large/XLarge)
product code listed above
“Awesome color and quality. Drivers loved them. Will order more in the near future.”
RONSEAU | SAFETY PROFESSIONAL | TACOMA, WA
• Use where visibility is important, but not mandated by OSHA or ANSI standards
• 1" tape (silver beaded or PVC reflective), vertical over the shoulders
• Features a drawstring hood, along with an elastic waistband and cuffs
• Bottom front and wrist sections are black to hide dirt
Type R Class 3 (ANSI/ISEA 107-2015 compliant) sweatshirt includes 2" silver glass bead reflective vertical stripes over the shoulder and around the torso and arms. X-Back style also meets Canadian Standards Association (CSA) Z96.22.
ENSURE THE RIGHT FIT Visit JJKeller.com/SAFEGEAR for size chart.
Blue
Black
Front pouch
Drawstring
Elastic cuffs and waistband
SAFETY APPAREL
TYPE R CLASS 3 CREW NECK SWEATSHIRT
• ANSI/ISEA 107-2020 Type R Class 3 compliant; X-Back style is also Canadian Standards Association (CSA) Z96-22 compliant
• Reflective tape goes over the shoulders and around the torso and arms
• 100% polyester 300 gsm PK anti-pill fleece
• Elastic waistband; black elastic cuffs
Available
LIME 65164 (size Large)
ORANGE 65172 (size Large)
Search product code listed above
X-BACK CREW NECK SWEATSHIRT
Available
LIME 67360 (size Large)
Search product code listed above
J. J. Keller Advantage members save on IMPRINTED SAFEGEAR! Take advantage at JJKeller.com/SAVE
NEW SCUBA FLEECE HOODED SWEATSHIRT
• Reflective piping around hood and pockets
• Made with high-quality scuba fleece (similar to neoprene) 96% polyester and 4% Spandex
• Front kangaroo pocket; drawstring hood; ribbed waistband; and cuffs to help minimize cold
• ANSI/ISEA 107-2020 Type R Class 3 compliant; X-Back style is also Canadian Standards Association (CSA) Z96-22 compliant
• 2" segmented silver reflective tape goes over the shoulders and around the torso and arms
• Constructed of moisture-wicking polyester mesh (machine washable)
• Black accents on front torso and arm cuffs
• 1 outside pocket
Common applications: road construction, survey crews, transport, utility crews, and other outdoor activities where employees need to be visible and warm.
Orange
SAFETY APPAREL
NON-CERTIFIED SLEEVELESS T-SHIRT
• For use where visibility is important but not mandated by ANSI Standards
Non-Certified T-Shirt Without Pocket Search product code: 65080 Visit JJKeller.com/SAFEGEAR
J. J. Keller Advantage members save on IMPRINTED SAFEGEAR! Take advantage at JJKeller.com/SAVE
“Got my high-visibility shirts delivered right away. Right size and very comfortable to wear over an undershirt at work.” WP1911 | SAFETY PROFESSIONAL | KANSAS CITY, KS
Orange Orange
Show Your Company Pride and Appreciation
Use our high-quality imprinting to:
• Show Off Your Brand
• Show Your Commitment to Safety
• Show Workers Your Appreciation
Imprinting your SAFEGEAR® apparel is a great way to PROMOTE YOUR BRAND COMMUNICATE KEY SAFETY MESSAGES. PLUS, IT MAKES A PERFECT EMPLOYEE GIFT! You’ll get competitive pricing with short lead times — as little as 5-10 business days.
“Came
Out Great”
“My imprinted sweatshirts came out great! I would recommend this imprinting because of the quality. It was my first time using J. J. Keller imprinting and I don’t want to go anywhere else!”
PLANKEY | WAREHOUSE MANAGER
“These jackets have provided a great level of added visibility when worn at roadside calls, plus they offer additional protection from the wind and cold. The jackets’ imprinting has held up very well, without any cracking or peeling.”
DANIEL WIECHMAN | COMMUNITY LIAISON OFFICER | FOX CROSSING POLICE, WI
SAFETY APPAREL
JACKETS
TYPE R CLASS 3 SOFTSHELL
JACKET
• ANSI/ISEA 107-2020 Type R Class 3 compliant
• 2" ANSI-compliant silver reflective tape
• Made with ANSI polyester softshell fabric with 190T tafetta lining
• Black bottom and sleeve cuffs hide dirt
• 2 mic tabs
• YKK zipper
• Includes drawstring waist and front zipper pocket
NEW TYPE R CLASS 2 SOFTSHELL JACKET
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" chevron reflective printed tape goes over the shoulders and around the torso
• 2 mic tabs; dual slot pencil pocket on left sleeve; cell phone and ID pocket on chest; large zipper pocket (fits tablet)
3-IN-1 BOMBER JACKET
64359 (size Large)
Search product code listed above
TYPE R CLASS 3 BOMBER JACKET
• ANSI/ISEA 107-2015 Type R Class 3 compliant
• 2" ANSI-compliant silver glass bead tape over the shoulders and around the torso and arms
• Made of high-quality 300D polyester oxford outer shell with 160g thermal quilted insulation
• Black bottom front and cuffs hide dirt; elastic waistband and cuffs help minimize cold
• 2 front pockets and 1 hook & loop flap cell phone chest pocket; two mic tabs Common applications: transport, road construction, survey crews, utility crews, and other outdoor activities where visibility and warmth are needed
FLEECE-LINED PARKA
JACKET TYPE R CLASS 3
• ANSI/ISEA 107-2015 Type R Class 3 compliant
• 2" silver glass bead tape goes over the shoulders and around the chest, torso and arms
• Durable 300D Teflon™-treated oxford material and 280 gsm polyester fleece
• Plastic D ring on front; hook & loop bottom and wrists
• Hook & loop cell phone pocket on front chest with clear ID pocket; 2 mic tabs
SAFETY APPAREL
TYPE R CLASS 2 REVERSIBLE PUFFER SAFETY VEST
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" reflective tape over the shoulders and around the torso (black side doesn’t have reflective tape)
• Durable quilted polyester
• Reversible (hi-vis lime/black)
• 2 outer pockets with flap; YKK zipper closure
“I wear this jacket daily and it is by far better than any other work jacket I’ve had before. Nice and warm, ready for those cold blustery days!”
MARK | SAFETY PROFESSIONAL | PATTERSON, NJ
ENSURE THE RIGHT FIT Visit JJKeller.com/SAFEGEAR for size chart.
3-IN-1 PARKA JACKET TYPE R CLASS 3
• ANSI/ISEA 107-2015 Type R Class 3 compliant jacket shell and zip-out removable fleece liner
• 2" serrated silver glass bead tape over 23⁄4" high-visibility orange goes over the shoulders and around the chest, torso and arms (jacket shell and liner)
• Made of high-quality 450D Teflon™-treated oxford material and 280 gsm polyester fleece
• Black panels on wrists and bottom hide dirt
• 2 front pockets; 1 cell phone chest pocket with clear ID pocket; two mic tabs; 2 plastic D rings; large pouch-style pocket on back
“This jacket has you covered from fall, harsh winter, to spring.”
RYAN K | KIMBERLY, WI
Reversible to black
SAFETY APPAREL
NEW HEAT-LOCK BOMBER JACKET
• ANSI/ISEA 107-2015 Type R Class 3 compliant
• Rated to -5º F, Heat Lock thermal-reflective breathable lining retains warmth using silver dots that reflect body heat, so you stay warm and comfortable as temperatures drop
• Bottom front and wrist of jacket are black to hide dirt
• Chest pocket with hook & loop closure; side pockets ; elastic waistband and cuffs; hood with drawstring; zipper closure
NEW TYPE R CLASS 3 HEATED BOMBER JACKET
• ANSI/ISEA 107-2020 Type R Class 3 compliant
• Up to 8 hours of consistent heat; 3 levels of heat
• 4 heat zones (left & right chest, 2 back)
• Waterproof, abrasion-resistant, impact-resistant, and windproof
• US Power bank included, 5000 mAh battery rechargeable 7.4V with full short circuit protection
PANTS
CLASS E PULL-ON PANTS
• ANSI/ISEA 107-2020 Supplemental Class E compliant (combine pants with an ANSI Class 2 or 3 top to create ANSI Class 3 outfit)
• 2" reflective tape over orange goes around bottom of legs
• Lightweight, breathable polyester mesh; black bottoms hide dirt
• Elastic waistband with drawstring
• 2 side hand pockets; 1 cargo pocket on right leg
Zip legs open to the knee for easy on/off over shoes/ boots
Heated Hand Warmer Pouch See page 61.
Class E Snowpants See page 61.
Rain Pants See pages 27, 59.
WOMEN’S SIZING
WOMEN’S SIZING
Ensure all workers have apparel that fits properly for safety and comfort.
• 2" ANSI-compliant silver glass bead reflective tape goes over the shoulders and around the torso
• Breathable polyester shell (machine washable)
• 2 large outer pockets (right side is flapped) and 1 external chest flapped phone pocket with pen pocket
• Internal drawstrings for adjustable waist; zipper closure
Search product code listed above
AVAILABLE
Men’s/Unisex safety vests. See pages 4-11.
ENSURE THE RIGHT FIT Visit JJKeller.com/SAFEGEAR for size chart.
Effective 1/13/25, 1926.95(c) states that employers must ensure all PPE properly fits each affected employee.
Improperly fitting PPE can mean the difference between effective protection, insufficient protection, or exposing the employee to danger. In some instances, poorly fitting PPE may offer no protection at all, while in other cases, it could create additional risks for both the wearer and those working nearby.
WOMEN’S SIZING
WOMEN’S FIT TYPE R CLASS 2 TWO-TONE VEST
Type R Class 2 (ANSI/ISEA 107-2020) compliant vest includes 2" silver tape over pink
Polyester mesh shell (machine washable)
2 large outer pockets with flap; 2 internal pockets
for tool tethering
for adjustable waist
D-ring
Drawstrings
Zipper closure
Pencil pocket on chest
Clear ID chest pocket
Hole for attaching a fall harness on back
WOMEN’S SIZING
NEW WOMEN’S FIT TYPE R CLASS 3 VEST
• ANSI/ISEA 107-2021 Type R Class 3 and CSA Z96-2022 Class 2 Level 2 compliant
• 2" ANSI-compliant silver reflective tape over orange, goes over the shoulders, around the torso and arms, and x-back
• Polyester shell with breathable mesh (machine washable)
• 2 large outer lower pockets with flaps; 2 external chest pockets (1 is a flapped phone pocket with pen pocket that fits most cell phones, the other has a clear front for ID
• Internal drawstrings for adjustable waist; zipper closure
WOMEN’S FIT NON-CERTIFIED T-SHIRT
• For use where visibility is important but not mandated by ANSI Standards
• Breathable, moisture-wicking polyester birdseye knit material
• 1 chest pocket
• Machine washable
Common applications: delivery drivers, construction workers, parking lot attendants.
LIME 65515 (size Large)
ORANGE 65521 (size Large)
Search product code listed above
Hi-Vis T-Shirt With Pocket, Non-Certified
See page 14.
WOMEN’S FIT TYPE R CLASS 2 T-SHIRT WITH POCKET
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• Reflective tape stripes go over the shoulders and around the torso
• Breathable, moisture-wicking polyester birdseye knit material
• Machine washable
Common applications: delivery drivers, construction workers, parking lot attendants.
“It was a fast delivery, nice packaging and the shirt works/fits great.”
CRITTER | ST. LOUIS, MO ALSO AVAILABLE
LIME 65503 (size Large)
ORANGE 65509 (size Large)
Search product code listed above
ALSO AVAILABLE
Men’s/Unisex T-shirts. See pages 13-15, 57.
ENSURE THE RIGHT FIT Visit JJKeller.com/SAFEGEAR for size chart.
Orange
Orange
WOMEN’S SIZING
WOMEN’S FIT TYPE R CLASS 2 T-SHIRT WITH POCKET
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" silver reflective tape over the shoulders and around the torso and arms
• Moisture-wicking polyester birdseye knit
• Hi-vis pink with black accent; 1 external chest pocket
NEW WOMEN’S FIT V-NECK COOLING T-SHIRT
• ANSI-ISEA 107-2020 Type R Class 2 compliant
• 2" silver reflective serrated tape goes over the shoulders and around the torso
• Lightweight, breathable ChillSoft fabric, cool to the touch; 4-way fabric stretch and side vents for flexibility and all-day comfort
• Active moisture-wicking technology disperses moisture for rapid evaporation
• Additional layer of fabric in front for enhanced modesty and coverage
• Reflective tape stripes go over the shoulders and around the torso and arms
• 100% polyester fleece
• 2 front pockets; drawstring hood; elastic waistband and cuffs; YKK zipper closure
• Machine washable
Men’s/Unisex sweatshirts. See pages
WOMEN’S FIT TYPE R CLASS 3 3-IN-1 REMOVABLE FLEECELINED PARKA JACKET
• Jacket and removable liner are both ANSI/ ISEA 107-2020 Type R Class 3 compliant
• 2" serrated silver glass bead tape over 23⁄4" orange tape, goes over the shoulders and around the chest, torso and arms
• Durable 450D Teflon™-treated oxford material and 280 gsm polyester fleece
• 2 mic tabs; 1 hook & loop cell phone chest pocket with clear ID pocket; back pouch pocket
• Plastic D ring on front; YKK zipper closure
WOMEN’S SIZING
WOMEN’S FIT TYPE R CLASS 2 REVERSIBLE PUFFER VEST
• ANSI/ISEA 107-2020 Type R Class 2 compliant
• 2" reflective tape goes over the shoulders and around the torso (black side doesn’t have reflective tape)
• Durable quilted polyester
• Reversible (hi-vis lime/black)
• 2 outer pockets with flap; YKK zipper closure
ALSO AVAILABLE
Men’s/Unisex Type R Class 2
Reversible Puffer Safety Vest See page 20. WOMEN’S FIT 3-IN-1 PARKA
65539 (size Large)
Search product code listed above
Search
66153 (size Large)
ENSURE THE RIGHT FIT Visit JJKeller.com/SAFEGEAR for size chart.
ALSO AVAILABLE
See page 20.
NEW WOMEN’S BOMBER JACKET TYPE R CLASS 3
• ANSI/ISEA 107-2020 Type R Class 3 compliant
• 2" silver glass bead reflective tape on torso, sleeves and chest
• Fully lined with 190T taffeta lining and 100g Dupont padding for warmth and comfort
• Removable fleece-lined hood
• 2 mic tabs; zippered chest pocket with clear ID pocket; side zipper pockets
• Ribbed waistband and cuffs help minimize cold
Men’s/Unisex
See page 19.
Bomber Jacket
Reversible to black
Men’s/Unisex 3-In-1 Parka
WOMEN’S SIZING
Super Rain Jacket!
“Great fit for women and I love the extra length in the back to help keep your behind dry. The material is heavy, and I love the clear pocket in front to hold your ID/badge while on the job site.”
SAFETY LADY | VIRGINIA
WOMEN’S FIT CLASS E RAIN PANTS
• ANSI/ISEA 107-2020 Supplemental Class E compliant; black pants are non-certified (combine ANSI Class 2 vest with a Class E pant for an ANSI Class 3 ensemble)
• 2" silver reflective tape goes around bottom of legs
• Polyurethane coated 300D oxford fabric with mesh lining
• 1 cargo pocket on right leg; zippered legs for easy on and off over shoes/boots
• Elastic waistband with drawstring
72242 (size Large) BLACK 72250 (size Large)
Search product code listed above
ENSURE THE RIGHT FIT
Visit JJKeller.com/SAFEGEAR for size chart.
WOMEN’S FIT RAIN JACKET
• Lime jacket is ANSI/ISEA 107-2020 Type R Class 3 compliant
• Use black jacket where visibility is important, but not mandated by OSHA or ANSI standards
• 2" silver reflective tape goes over shoulders and around the torso and arms
• Made of polyurethane coated 300D oxford fabric with mesh lining; YKK zipper closure with snap storm flap
• 2 mic tabs; 2 external lower pockets; 1 external chest flapped phone pocket with clear ID pocket; and 1 external chest zippered pocket
ea. LIME 68994 (size Large) BLACK 69002 (size Large)
Search product code listed above
Men’s/Unisex Rain Apparel See page 59.
WOMEN’S SIZING
HAND PROTECTION
WOMEN’S FIT CUT LEVEL A3 GLOVES
• ANSI Cut Level A3 on front palm only
• Unlined Spandex fabric on back of hand for breathability; terry towel thumb back; synthetic leather nail tips and finger knuckles
• Elastic wrist with synthetic leather hook & loop closure to keep debris out
• Excellent comfort and dexterity; ideal for working with sharp objects
• Touchscreen index finger and thumb
See page 36.
WOMEN’S FIT GRIP GLOVES
• Reflective tape for low-light conditions
• Unlined Spandex fabric on back of hand for breathability; silicon printed synthetic leather palm; synthetic leather nail tips
• Elastic wrist with synthetic leather hook & loop closure to keep debris out
• Excellent comfort and durable grip
• Touchscreen index finger and thumb
Price per pair 65600 (size Large)
Search product code listed above
WARNING: This product can expose you to chemicals, including N,NDimethylformamide, which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov.
WOMEN’S FIT INSULATED GLOVES
WARNING: This product can expose you to chemicals, including N,NDimethylformamide, which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov.
Visit JJKeller.com/SAFEGEAR for size chart.
• Reflective piping for low-light conditions
• 3M™ Thinsulate™ with micro fleece lining
• Foam laminated Spandex fabric on back of hand with nylon over neoprene knuckles; polyurethane diamond grip base palm and nail tips
• Elastic wrists with synthetic leather hook & loop closure keep debris out
WARNING: This product can expose you to chemicals, including N,N-Dimethylformamide, which is known to the State of California to cause Cancer. For more information, go to www. P65Warnings.ca.gov.
Welding Cowhide Leather Gloves
Women’s Cowhide Leather Gloves with Keystone Thumb
Fit Grip Glove
HAND PROTECTION
HAND PROTECTION
Protect workers’ hands from exposure, impact and abrasion.
GENERAL PURPOSE 29-33
............................ 33
.............................. 34-35
...................... 36
PROTECTION 44-45
LEATHER PALM WORK GLOVES
• Cowhide construction and reinforced palm offer abrasion resistance and durability
• Cotton glove back
• Gunn style eliminates exposed seams in palm and provides comfort fit
• Safety cuff
Common applications: construction, contractors, gardening, general assembly, and maintenance. ENSURE THE RIGHT FIT
LEATHER WORK GLOVES
Available in sizes S-2XL 50-99
$5.20 ea. 10-49
$5.49 ea. 1-9
$5.78 ea.
Price per pair 64318 (size Large)
Search product code listed above
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
HAND PROTECTION
Lined glove has Sherpa lining.
RED COWHIDE LEATHER WORK GLOVES
• Cowhide construction offers abrasion resistance and durability
• Cotton glove back with red accents
• Gunn style eliminates exposed seams in palm and provides comfort fit
• Safety cuff
Common applications: construction, contractors, gardening, general assembly, and maintenance.
Available in sizes S-2XL
Price per pair 64307 (size Large)
Search product code listed above
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
SEAMLESS KNITTED POLYCOTTON LINER GLOVES
• Palm has natural rubber coating with a crinkled finish
• Excellent grip in wet or dry conditions
• Thin coating provides sensitivity and dexterity
• Open back for ventilation and breathability
Common applications: automotive assembly, construction, general purpose, refuse collection, timber handling and warehousing. POLYCOTTON LINER GLOVES
Available in sizes S-XL
$3.34 ea. 10-49
$3.40 ea. 1-9
$3.47 ea. Price per pair 64864 (size Large)
Search product code listed above
ENSURE THE RIGHT FIT
Visit JJKeller.com/SAFEGEAR for size chart.
COWHIDE LEATHER/BLACK TWILL RIGGER GLOVES
Cowhide leather construction (with black cotton twill glove back) offers abrasion resistance and durability with excellent dexterity
Black fleece lining for warmth Wing thumb design
Elastic knit wrist for tight fit to keep dirt and contaminants out
Common applications: construction, farming, machine operation, roping, utility work, fabrication and many other general work applications.
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
HAND PROTECTION
HI-VIS GOATSKIN GLOVES
Reflective tape on back side for low-visibility conditions or at night
Premium quality goatskin leather construction and cotton fleece liner enhances feel and durability
Rubberized safety cuff for added protection
Full leather fingertips
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
LEATHER WORK GLOVES
• Reflective knuckle straps are appropriate for low-visibility conditions or at night
• Available unlined or with moisture-wicking insulated cotton fleece lining
Common applications: light-duty welding, construction, transportation, farming, machine operation, roping and utility work.
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
HAND PROTECTION
NITRILE NYLON KNIT GLOVES
• Nylon gloves coated on palms and top of fingers with black nitrile for superior grip
• Ultra-lightweight knit wrist
• Style is breathable and foam finished
• Superior form, fit and feel reduces hand fatigue
Common applications: handling small oily parts and components, machining, micro-engineering, working with automotive components, painting, general assembly, horticulture and maintenance.
SMOOTH-PALM GLOVES Available
Price per pair 58082 (size
Search product code listed above
GRIP-DOT
PALM GLOVES
Search product code listed above
OIL-RESISTANT GLOVES
• ANSI/ISEA 105-2016 and EN 388 2016 compliant
• Textured PVC vinyl coating
• Safety cuff
Common applications: outdoor construction, conducting refuse collection, general carpentry, warehousing.
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
HI-VIS DEXTERITY GRIP GLOVES
• Ideal for situations where grip and dexterity are important
• Lightweight foam insulated Spandex
• Synthetic leather palm with silicon printing
• Reflective tape on fingertips and knuckles
• Elastic wrists with hook & loop closure
HI-VIS DEXTERITY GRIP GLOVES
Available in sizes S-2XL
Price per pair 64513 (size Large)
Search product code listed above
Search product code listed above
J. J. Keller Advantage members get FREE SHIPPING! Take advantage at JJKeller.com/SAVE
Smooth Palm
HAND PROTECTION
NEW STRING COTTON WORK GLOVES
• Seamless 7-gauge cotton/polyester knit shell is comfortable and flexible
• Knit wrist helps prevent dirt and debris from entering the glove
• Lightweight with excellent airflow to keep hands cool, comfortable and breathable
• An economical alternative to standard canvas or jersey gloves
• Dot styles provide good grip on wet and dry surfaces
• Sold in packs of 12 STRING COTTON GLOVES
Available in
Search product code listed above
WELDING GLOVES
TIG WELDING GLOVES
• Cowhide construction offers abrasion resistance and durability
WARNING: This product can expose you to chemicals, including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
PRO TIP: WELDING GLOVES
Welding is serious work that leaves employees prone to smash, caught-in, pinched, cut and burn hazards. Since employees’ hands are their primary and most important tool during welding operations, they require special protection. Remember, the goal every day is to get employees home the way they came into work: safe and in one piece!
HAND PROTECTION
NEW YELLOW COWHIDE LEATHER DRIVER GLOVES
• Made of premium Grade A leather with superior workmanship and consistent grading
• Abrasion resistant with excellent dexterity
• Elastic closure inside glove for safety
• Color coded hems to identify size
Common applications: light duty welding, construction, farming, machine operation, roping, utility work, and many other general work applications. YELLOW LEATHER DRIVER GLOVES Available
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
PRO TIP: LEATHER GRADES
Top-grain leather is a high-quality leather type derived from the upper layer of an animal hide, which has been sanded or buffed to remove imperfections and create a smooth, uniform surface.
GRADE A Represents the highest quality, pristine leather with few to no imperfections, scars, or markings. 0.9-1.1 mm thickness
GRADE B This grade is still usable, but may have 5-10% imperfections, like minor scars or marks. 0.8-1.0 mm thickness
GRADE C A medium grade, still usable, but with between 10-20% imperfections. 0.8-0.9 mm thickness
LEATHER DRIVER GLOVES
• Top-grain cowhide leather
• Keystone thumb provides additional durability and comfort
• Abrasion resistance and excellent dexterity
Common applications: light-duty welding, construction, farming, machine operation, roping, utility work, and other general work applications.
NON-INSULATED
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
Insulated glove has cotton fleece liner
HAND PROTECTION
ALSO AVAILABLE
Women’s Cowhide Leather
Gloves with Keystone Thumb Search product code: 68862 Visit JJKeller.com/SAFEGEAR
COWHIDE DRIVER GLOVES
• Top-grain cowhide construction offers excellent strength and durability
• Hi-vis orange fingertips; keystone thumb
• “Watch Your Hands” message on back helps increase safety awareness
• Color-coded hem to identify sizes
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
PRO TIP:
Leather work gloves are best for protection from rough objects, sparks and heat, and for cushioning from blows in heavy-duty work environments. All kinds of leather provide comfort, durability, dexterity, mild heat resistance, and abrasion protection. Leather work gloves also provide firmer grip when operating forklifts and other vehicles. These advantages make leather a traditional favorite of industrial workers. DRIVER GLOVES
NEW REGULAR GRADE COWHIDE LEATHER DRIVER GLOVES
• Made of Grade B leather with superior workmanship and consistent grading
• Abrasion resistant with excellent dexterity
• Elastic closure inside glove for safety
• Color coded hems to identify size
Common applications: light duty welding, construction, farming, machine operation, roping, utility work, and many other general work applications.
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
NEW ECONOMY GRADE COWHIDE LEATHER DRIVER GLOVES
Made of Grade C leather with superior workmanship and consistent grading
Abrasion resistant with excellent dexterity
Elastic closure inside glove for safety
Color coded hems to identify size
Common applications: light duty welding, construction, farming, machine operation, roping, utility work, and many other general work applications.
Search product code listed above
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
HAND PROTECTION
BLACK AND GOLD COWHIDE MECHANICS GLOVES
• Cowhide construction and Spandex back offer abrasion resistance, durability and precision fit
• Double stitched design with reinforced palm and thumb
• Elastic cuff with hook & loop closure
IMPACT-REDUCTION MECHANICS GLOVES
• ANSI/ISEA 105-2016 and EN 388 2016 compliant
• Breathable polyester construction with palm padding
• TPR impact back
• Stretch Spandex cuff with hook & loop closure
• Touchscreen capable
LIME 70999 (size Large)
GRAY 70994 (size Large)
Search product code listed above
WARNING: This product can expose you to chemicals, including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
NEW FIT GRIP GLOVES
Excellent comfort and durable grip
Unlined Spandex fabric on back of hand for breathability
Elastic wrist with synthetic leather hook & loop closure to keep debris out Reflective strip for low-light conditions
• Touchscreen capable
Search product code listed above
ALSO AVAILABLE
Women’s Fit Grip Gloves. See page 28.
Gray
HAND PROTECTION
CUT- AND ABRASION-RESISTANT GLOVES
NEW NITRILE MICRO-FOAM DIPPED CUT LEVEL A1 GLOVES
ANSI/ISEA 105-2016 compliant
FDA 21 CFR Part 177 food handling compliant
15 gauge nylon/Spandex liner provides excellent dexterity and flexibility; knit wrists prevent dirt and debris from entering glove
Ultra-thin micro-foam nitrile coating on palm and fingers provides excellent oil repellency and slip resistance, comfort and flexibility
• Touchscreen compatible
Common applications: construction, logistics and
NITRILE MICRO-FOAM
• ANSI/ISEA 105-2016 compliant
• FDA 21 CFR Part 177 food handling compliant
• 15 gauge nylon/Spandex liner provides excellent dexterity and flexibility; knit wrists prevent dirt and debris from entering glove
• Raised nitrile dots increase durability and grip
• Touchscreen compatible
Common applications: construction, logistics and warehousing, automotive, food processing, assembly, and general and raw material handling. NITRILE MICRO-FOAM DOTTED GLOVES
ALSO AVAILABLE
NITRILE CUT LEVEL A2 GLOVES
• ANSI/ISEA 105-2016 and EN 388 2016 compliant
• 15-gauge glass fiber knit and polyester materials for enhanced cut protection
• Nitrile palm coating improves durability, grip and comfort
Nitrile Smooth SandyDipped Cut Level A1 Glove
HAND PROTECTION
NEW SANDY LATEX PALM TERRY LINED CUT LEVEL A2 GLOVES
• 15 gauge nylon/Spandex liner provides excellent dexterity and flexibility
• 10-gauge acrylic terry liner provides durable comfort and heat retention
• Doubled dipped natural sandy latex coated palm and fingers offers superior grip; remains soft and flexible in sub-zero conditions; provides abrasion resistance
Common applications: assembly, machinery and equipment, metal fabrication, oil and gas, logistics and warehousing, mining, cutting glass, handling metal sheets and panels, and picking components.
GRAY KNIT RUBBER PALM GLOVES
• ANSI/ISEA 105-2016 compliant
• 70% polyester/30% cotton lining
• 100% latex crinkle coating on palm and fingertips protects hands from abrasion and cuts; provides durability and comfort
• Knit cuff
Common applications: road construction, railroad, municipal utilities and landscaping.
NEW LATEX SMOOTH SANDY DIPPED WINTER CUT LEVEL A2 GLOVE
ANSI/ISEA 105-2016 compliant
FDA 21 CFR Part 177 food handling compliant 15-gauge nylon outer liner for super fit and elasticity; 10-gauge acrylic fleece inner liner for warmth
Full latex coating on front and back of glove isolates cold air and water, easily adapting to low temps; provides water and oil resistanc e
Sandy latex coating on palm and fingers provides greater grip and abrasion resistance
• Touchscreen compatible
Common applications: cold environments, automotive, industrial, warehousing, logistics, oil and gas, and aerospace.
GRAY KNIT RUBBER PALM GLOVES
SANDY LATEX PALM TERRY LINED A2 GLOVES
LATEX SMOOTH SANDY DIPPED WINTER A2 GLOVES
HAND PROTECTION
POLYURETHANE DIPPED CUT LEVEL A3 GLOVES
• ANSI/ISEA 105-2016 compliant
• Flat dip polyurethane palm coating improves grip and protects against nicks and cuts
• Elastic wrist for tight fit to keep dirt and contaminants out
• Touchscreen fingertips
NEW POLYURETHANE DIPPED CUT LEVEL A3 GLOVES
• ANSI/ISEA 105-2016 compliant
• FDA 21 CFR Part 177 food handling compliant
• 13-gauge HPPE/fiberglass yarn liner provides excellent cut resistance while maintaining breathability and dexterity
• Polyurethane coating on palm and fingers will stretch with the hand, provide good grip and is form-fitting to reduce hand fatigue Common applications: assembly, machinery and equipment, metal fabrication, oil and gas, logistics and warehousing, mining, cutting glass, handling metal sheets and panels, and picking components.
at JJKeller.com/SAVE
SEAMLESS KNITTED KEVLAR® LINER GLOVES
• Palm has a natural rubber coating with a crinkled finish
• Coating protects hands while allowing flexibility and dexterity
• Kevlar® seamless liner provides superior protection against cuts, slashes, and abrasion
• EN 388 Level 4 cut resistance
• Touchscreen compatible
Common applications: automotive assembly, construction, general purpose, refuse collection, timber handling, and warehousing.
PRO TIP: DIPPED PALM GLOVES
It’s no secret that cuts, abrasions, lacerations, and scrapes from sharp hazards can keep employees out of work. That’s why it’s important you provide dipped palm gloves, including ones made from latex, polyurethane, and nitrile, when employees work with knives or other sharp objects. These types of gloves are meant to protect workers’ palms and fingers.
HAND PROTECTION
POLYURETHANE COATED CUT LEVEL A4 GLOVES
• ANSI/ISEA 105-2016 compliant
• Flat dip polyurethane palm coating improves grip; ideal for handling small oily parts; uncoated back for breathability
• Elastic wrist for tight fit to keep dirt and contaminants out
• Touchscreen fingertips
Very comfortable, less expensive. “Everyone likes them better than the old ones we are using.”
SAFETY MAN | PITTSBURG, KANSAS
NEW BLADESTOP NITRILE SMOOTH SANDY CUT LEVEL A4 GLOVE
• ANSI/ISEA 105-2016 compliant
• FDA 21 CFR Part 177 food handling compliant
• 18-gauge seamless Bladestop shell construction
• Double-dipped nitrile on full hand provides strong water and oil resistance and increases durability; SuperGrip® sandy nitrile coating on palm and fingers technology provides superior grip and tactile sensitivity
• Touchscreen compatible
Common applications: assembly, machinery and equipment, metal fabrication, oil and gas, logistics and warehousing, mining, cutting glass, handling metal sheets and panels, and picking components.
NEW BLADESTOP NITRILE MICRO-FOAM SMOOTH DIP CUT LEVEL A4 GLOVE
ANSI/ISEA 105-2016 compliant 15-gauge seamless Bladestop shell construction
Hanfeel® ultra-thin micro-foam nitrile coating technology on palm and fingers provides superior breathability and dexterity
Reinforced thumb crotch for extended glove life
• Touchscreen compatible
HAND PROTECTION
NITRILE COATED CUT LEVEL A5 GLOVES
• ANSI/ISEA 105-2016 compliant
• Nitrile coating ideal for handling small objects, even when oily
• Uncoated back for breathability; 25% steel fiber, 30% HPPE, 20% nylon, 20% cotton, and 5% Spandex
• Elastic wrist for tight fit to keep dirt and contaminants out
• Touchscreen compatible
• Ideal for jobs with high cut hazards
• Touchscreen fingertips
NITRILE COATED CUT LEVEL A5 GLOVES
Available in sizes S-2XL 25-99
$10.74 ea. 10-24
$10.90 ea. 1-9
$11.01 ea.
Price per pair 67302 (size Large)
Search product code listed above
UNCOATED CUT LEVEL A5 GLOVES
• ANSI/ISEA 105-2016 compliant
• Made of 30% steel fiber; excellent comfort and dexterity
• Elastic wrist for tight fit to keep dirt and contaminants out
• Ideal for handling sharp objects; excellent comfort and dexterity
• Touchscreen fingertips
Available
Search product code listed above
ENSURE THE RIGHT FIT Visit JJKeller.com/SAFEGEAR for size chart. UNCOATED CUT LEVEL A5 GLOVES
WARNING: This product can expose you to chemicals, including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
NEW BLADESTOP POLYURETHANE DIP CUT LEVEL A5 GLOVE
ANSI/ISEA 105-2016 compliant FDA 21 CFR Part 177 food handling compliant
15-gauge Bladestop shell construction
Thin polyurethane coating on palm and fingers provides a tactile grip in dry and slightly oily conditions
• Touchscreen compatible
Common applications: assembly, machinery and equipment, metal fabrication, oil and gas, logistics and warehousing, mining, cutting glass, handling metal sheets and panels, and picking components.
Search product code listed above
HAND PROTECTION
NEW BLADESTOP POLYURETHANE DIP CUT LEVEL A5 GLOVE
ANSI/ISEA 105-2016 compliant
18-gauge Bladestop shell construction
Ultra-thin, durable polyurethane coating offers superior slip and abrasion resistance
Nitrile coated patch on thumb crotch helps increase abrasion resistance and provide enhanced durability for extended glove lif e
• Touchscreen compatible
Common applications: assembly, machinery and equipment, metal fabrication, oil and gas, logistics and warehousing, mining, cutting glass, handling metal sheets and panels, and picking components.
NEW BLADESTOP NITRILE
MICRO-FOAM
SANDY DIPPED
CUT LEVEL A5 GLOVE
• ANSI/ISEA 105-2016 compliant
• FDA 21 CFR Part 177 food handling compliant
• 15-gauge seamless Bladestop shell construction
• SuperGrip® micro-foam sandy nitrile coating technology on palm and fingers provides superior grip and tactile sensitivity
• Nitrile coated patch on thumb crotch helps increase abrasion resistance and provide enhanced durability for extended glove life
• Touchscreen compatible
Common applications: assembly, machinery and equipment, metal fabrication, oil and gas, logistics and warehousing, mining, cutting glass, handling metal sheets and panels, and picking components. BLADESTOP NITRILE MICRO-FOAM CUT LEVEL A5
Price per pair 76845 (size Large)
Search product code listed above
ALSO AVAILABLE
Goatskin Cut Level A6 Oil & Gas Gloves with TPR Search product code: 67286 Visit JJKeller.com/SAFEGEAR
Manufacturer-patented Bladestop offers a high-performance protective material that combines a graphene technology-based engineered fiber with other common fibers like HPPE (HighPerformance Polyethylene) and recycled polyester to form the most robust glove material available.
NITRILE COATED CUT LEVEL A6 GLOVES
• ANSI/ISEA 105-2016 compliant
• Nitrile coating ideal for handling small objects, even when oily; uncoated back for breathability
• Elastic wrist for tight fit to keep dirt and contaminants out
• Excellent comfort and dexterity
• Ideal for heavy-duty cut hazards
• Touchscreen fingertips
HAND PROTECTION
• ANSI/ISEA 105-2016 compliant
• FDA 21 CFR Part 177 food handling compliant
• 13-gauge seamless Bladestop shell construction
• SuperGrip® foam sandy nitrile coating technology on palm and fingers provides superior grip and tactile sensitivity
• Nitrile coated patch on thumb crotch helps increase abrasion resistance and provide enhanced durability for extended glove life
• Touchscreen compatible
Common applications: logistics and warehousing, machinery and equipment, oil and gas, metal fabrication, assembly, handling metal sheets and panels, equipment maintenance, cutting grass, and picking components.
CUT LEVEL A7 GLOVES
• ANSI/ISEA 105-2016 and EN 388 2016 compliant
• Steel fiber and HPPE knit materials for enhanced cut protection
• Molded TPR armor for full dorsal cut protection
• High visibility
Common applications: construction, oil/gas drilling, extraction/refining, fracking, tool pushing, mining, demolition, heavy construction, cargo handling, mechanics and petrochem.
WARNING: This product can expose you to chemicals, including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
ENSURE THE RIGHT FIT Visit JJKeller.com/SAFEGEAR for size chart.
NITRILE COATED CUT LEVEL A8 GLOVES
• ANSI/ISEA 105-2016 compliant
• Nitrile coating ideal for handling small objects, even when oily
• Uncoated back for breathability; 40% steel fiber, 20% HPPE, 15% nylon, 20% cotton, and 5% Spandex
• Elastic wrist for tight fit to keep dirt and contaminants out
• Ideal for jobs with high cut hazards
• Touchscreen compatible
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov.
NEW BLADESTOP NITRILE MICRO-FOAM SANDY DIP CUT LEVEL A9 GLOVE
ANSI/ISEA 105-2016 compliant
FDA 21 CFR Part 177 food handling compliant
13-gauge seamless Bladestop shell construction
SuperGrip® foam sandy nitrile coating technology on palm and fingers provides superior grip and tactile sensitivity
Nitrile coated patch on thumb crotch helps increase abrasion resistance and provides enhanced durability for extended glove life
• Touchscreen compatible
Common applications: logistics and warehousing, machinery and equipment, oil and gas, metal fabrication, assembly, handling metal sheets and panels, equipment maintenance, cutting grass, and picking components.
76855 (size
Search product code listed above
HI-VIS COLD STORAGE WINTER GLOVES
• Heavy-duty gloves ideal for working in cold weather and cold storage environments
• Synthetic leather palm with polyurethane (PU) football serino palm patch and foam padding
• Polyurethane football serino fingertips with reflective tape
• Micro fleece lining with 3M™ Thinsulate™ 40 gsm insulation, 2mm foam, and water barrier
• Elastic knit wrist with vinyl puller Common applications: light-duty welding, construction, farming, machine operation, roping, and utility work.
These gloves are great
“These gloves are great and very warm in the cold weather.”
DJP5683 | INDIANAPOLIS, IN
PRO TIP: COLD STORAGE GLOVES
Protecting hands is crucial for maintaining productivity and safety, especially in cold environments. Ensuring workers have the right gear, like insulated gloves, can make a significant difference. Not only does it prevent cold-related injuries like frostbite and frostnip, but it also helps workers stay focused and efficient.
Hats
Smooth Latex Dipped Glove with Grommet
Yellow Cowhide Leather Sherpa Lined Gloves
Nitrile Coated Cut Level A9
Gloves
HAND PROTECTION
THERMAL FOAM DIPPED NITRILE WINTER GLOVES
Foam latex coated palm and fingers
• Waterproof to wrist cuff
• 13-gauge thermal liner
• Elastic wrist for secure fit
WARNING: This product can expose you to chemicals, including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov
THERMA-FIT COLD WEATHER GLOVES
• 100% polyester with terry cotton lining
• Rough textured grip; natural latex crinkle coating on palm and fingertips protects hands from abrasion, cuts, punctures and tears
• Knit cuff
• Ideal for work in cold environments
ALSO AVAILABLE
Cut-Resistant Gloves See pages 37-44.
ENSURE THE RIGHT FIT
Visit JJKeller.com/SAFEGEAR for size chart.
Top half can be attached to cover fingers.
FINGERLESS FLIP-TOP MITTENS
• Made of 50% wool, 40% polyester, and 10% acrylic
• Pigskin leather palm; 3M Thinsulate™ lining
• Rib-knit cuff keeps out cold drafts
• Convert mitten to half-finger work gloves by pulling back the top; flap secures with hook & loop for quick on/off
EYE PROTECTION
EYE PROTECTION
Protect workers’ eyes from flying debris, impact, and chemical splashes.
SAFETY GLASSES 46-51
SAFETY GOGGLES ............ 51
59796 (AS)
59797 (AS/AF)
SAFETY GLASSES WITH BLACK FRAMES
• ANSI Z87.1 compliant
• 99.9% UV protection
• Lightweight for all-day comfort
• Clear lens
• Anti-scratch (AS) 59796
Search product code listed above
UV 400 SAFETY GLASSES
• ANSI Z87.1 compliant
• UV 400 protection
• Clear frame with front and side impact protection
• Lightweight, comfortable fit
• Clear lens
• Anti-scratch/anti-fog (AS/AF)
• UV 400 protection 59801
Search product code listed above
• Clear lens
Very comfortable, less expensive.
“I purchased these glasses for our supervisor and above level and they like them very much.”
SAFETY MAN | PITTSBURG, KANSAS
• Anti-scratch/anti-fog (AS/AF) 59797
• Mirror smoke lens 60860
Search product code listed above
driving
EYE PROTECTION
SAFETY GLASSES
• ANSI Z87.1 compliant
• 99.9% UV protection
• Clear frame with front and side impact protection • Lightweight, comfortable fit
“My sales rep sent me some samples of J. J. Keller® SAFEGEAR® gloves and glasses to try, and the employees loved them. To me, comfort and protection are the most important factors when choosing PPE. SAFEGEAR offers both. Our company deals with melted plastic at temperatures of 600 degrees or more, so my workers’ gloves need to be comfortable and breathable. Being able to buy SAFEGEAR in volume helped me save on price, which was a big win. And the customer service I get from my rep is great; she’s very responsive.”
• Soft nose bridge and rubber tip arms for added comfort
65409
LIME 66181
ORANGE 66182
RED 66183
BLUE 66184
BLACK 66185
PURPLE 66186
GREEN 66188
YELLOW 66187
Search product code listed above
“I absolutely love the J. J. Keller® SAFEGEAR® Optical 1 safety glasses ... they are the best glasses I’ve worn. You’ve set the bar high for your competitors once the ladies find out how amazing these will fit their faces.”
KRYSTIL
PAINTER | RAVENSWOOD, WEST VIRGINIA
66189 (AS/AF)
J. J. Keller Advantage members get FREE SHIPPING! Take advantage at JJKeller.com/SAVE
Amber lens, ideal for
59787 (AS)
EYE PROTECTION
GLASSES
• ANSI Z87.1-2015 compliant
• Lightweight, flexible frame provides comfortable fit
• Extended peripheral view
•
SAFETY GLASSES WITH RUBBER TIPS
• Meets ANSI Z87.1-2015 Standard
• 99.9% UV protection
• Lightweight with rubber ends for all-day comfort
• Clear lens
• Anti-scratch (AS)
Search product code listed above
ea. 1-11
ea.
ea.
• Gray lens
• Anti-scratch/anti-fog (AS/AF)
Search product code listed above
J. J. Keller Advantage members get FREE SHIPPING! Take advantage at JJKeller.com/SAVE
PRO TIP:
RUBBER TIPS
PRO TIP:
ANSI Z87.1
Eye injuries can occur from impacts, heat, dust, chemicals, and optical radiation. Eye protection meeting ANSI Z87.1 ensures workers are protected from these hazards and includes primary protectors such as eye spectacles and safety goggles. Secondary protectors, such as face shields, provide an additional layer of protection to workers’ eyes. Primary eye protection uses lenses, frames, and side shield components to protect workers’ eyes. In contrast, windows, shields, and headgear on secondary protectors guard against eye injuries.
(for outdoor use)
Maximize the comfort of your eyewear and its fit against your head by using rubbed-tipped safety glasses. Safety glasses can slip forward from workers’ faces while sweating or working in wet locations. Rubber tips on eye protection can minimize this issue while ensuring workers’ safety glasses stay positioned when it matters the most during work activities.
Quick Service and Delivery “Great products.” RICKLOE | CT
59792
Gray lens with darkening effect
59790
Employees are more likely to wear safety glasses that are comfortable, look fashionable, and function seamlessly. Different frames, lens colors, and coatings can add to the functionality of safety glasses while still adhering to ANSI Eye Protection Standards.
EYE PROTECTION
SAFETY GLASSES
• Meets ANSI Z87.1-2015 Standard
• 99.9% UV protection
• Lightweight with rubber ends for all-day comfort
• Anti-scratch coating for longer lens life
• Anti-fog reduces fogging to maintain clear vision
CLEAR LENS
• Orange accent color
• Clear lens
• Anti-scratch/anti-fog (AS/AF)
• Lime accent color
• Clear lens
• Anti-scratch/anti-fog (AS/AF)
LENS COLORS
LENS COLOR HOW IT WORKS
Clear Allows maximum amount of light to pass through the lens without distorting colors; provides maximum visual clarity
Blue Reduces glare and yellow light; minimizes eye strain and fatigue
Grey Limits how much light can pass through the lens; reduces outdoor glare; provides most accurate color visibility
Amber Enhances light and contrast; brightens environments; reduces haze and glare; blocks blue light
APPLICATIONS
59802
59803
Search product code listed above
• Orange
• Black
• Anti-scratch (AS)
• Lime accent color
• Black mirror indoor/ outdoor lens
• Anti-scratch (AS)
59805
Search product code listed above
PRO TIP: ULTRAVIOLET LIGHT
UVA rays account for about 95% of the sun’s rays that aren’t filtered out by the earth’s atmosphere, and UVB rays account for less than 5% of unfiltered rays. Besides causing damage to skin, these UV rays can also damage workers’ eyes as well as cause eye cancers and diseases. UV-blocking safety glasses can prevent these injuries by reducing and blocking out harmful UV rays.
Standard for most safety glasses; low-light or indoor use
Low-light conditions (indoor and outdoor use)
Environments where bright light conditions can cause eye fatigue
Low-light conditions (indoor and outdoor use)
*Not recommended for night use
LENS COATINGS
COATING HOW IT WORKS
Anti-Scratch (AS) Anti-Scratch safety glasses are treated with a scratchresistant coating on the lens that strengthens the surface to show fewer scratches.
Anti-Fog (AF) Temperature changes and humidity can cause safety glasses to fog. Removing glasses to wipe away moisture exposes workers to potential hazards. Anti-Fog coating reduces or eliminates fogging to maintain clear vision.
EYE PROTECTION
J. J. Keller Advantage members get FREE SHIPPING! Take advantage at JJKeller.com/SAVE
SAFETY GLASSES WITH INNER GASKET
• ANSI Z87.1-2015 compliant
• Lightweight, comfortable fit
• Sport style with interchangeable headband
• EVA Foam inside frame provides tight fit and protects from dry particulate and liquid chemical materials
• Smoke lens
ADJUSTABLE TEMPLE SAFETY GLASSES
ANSI Z87.1-2015 compliant
Lightweight, comfortable fit
Traditional style with round lens, molded nose bridge, and adjustable angle/length legs
All employees have liked them
• Anti-scratch/anti-fog (AS/AF) 64402
Search product code listed above
“All employees that have worn these glasses have liked them. Other employees have asked for them to replace the different type that they were currently wearing.”
SAFETY MAN | PITTSBURG, KANSAS
• Anti-scratch/anti-fog (AS/AF) 64403
• Clear lens
• Anti-scratch/anti-fog (AS/AF) 64611
Search product code listed above
NEW LED GLASSES
• ANSI Z87.1-2015 compliant
• Lightweight, comfortable fit
• The super bright pivoting LED bulbs (3 lumens per side) provide bright light while keeping hands free
• Anti-scratch (AS) 71930
Search product code listed above
• Easy-to-use push button on/off switches located at the top of each temple
• 3.0V Lithium-Manganese button cell, battery code CR2032; 50 hours working time before batteries need to be replaced
• UV380 protection
• Anti-scratch strengthens lens surface to show fewer scratches
SAFETY GLASSES WITH SIDE PROTECTION
• ANSI Z87.1-2015 compliant
• Lightweight, comfortable fit with PC lens, nylon frame, adjustable temple legs, and side shield for extra protection
• Anti-scratch/anti-fog
Search product code listed above
EYE PROTECTION
OVER-THE-GLASSES GLASSES
• ANSI Z87.1-2003 compliant
• Provides 99.9% UV protection
• Wraparound style
• Molded-in browguard
• Vented side shields
• Can be worn over regular Rx eyewear
• Great option for temporary workers or visitors
SAFETY GOGGLES
• ANSI Z87.1-2010 compliant
• Provides 99.9% UV protection
• Can be worn with most half-mask respirators
• Clear, anti-fog reduces fogging to maintain clear vision
• Direct vent (perforated)
• Anti-fog (AF) 59808
• Indirect vent
• Anti-fog (AF) 59809
PRO TIP: DIRECT VS. INDIRECT VENTING
Adjustable strap for comfortable fit
Angled venting prevents directing venting to interior
Goggles provide better protection than safety glasses by sealing around the eyes. Direct vent goggles reduce dry particulate exposure and fogging, but aren’t suitable for chemical splashes. Indirect vent goggles block direct airflow, offering better protection against both particulates and chemical splashes.
ADJUSTABLE MOLDED SAFETY GOGGLES
• ANSI Z87.1-2015 compliant
• Lightweight, comfortable fit with adjustable, elastic headband
• Soft rubber seal molds to face, protecting eyes from all sides
• Anti-fog reduces fogging to maintain clear vision
• Anti-scratch strengthens lens surface to show fewer scratches
HEAD PROTECTION
HEAD PROTECTION
Ensure workers’ heads are protected from impact and falling debris.
SAFETY HELMETS 52
HARD HAT .... 53
53
53
AMERICANA SAFETY HELMETS (TYPE II)
• Vented helmets are ANSI/ISEA Z89.1 Class C; unvented are Class E & G
• Safety Equipment Institute (SEI) certified
• Meet the low temperature (LT) option of the Z89.1 Standard
• 4-point woven nylon suspension with Mega Ratchet® size adjustment for head sizes 6.5-8 as well as goggle retaining slots
• 4-point chinstrap made of durable nylon with woven webbing and slider size adjustments with deluxe chin guard
• Feature a short peak and low profile
• Feature an insert that protects the wearer from lateral and top impacts to the helmet
• Moisture-wicking brow pad is removable, washable and replaceable
HEAD PROTECTION
HARD HATS
RATCHET HARD HATS (TYPE I)
• Vented hats meet ANSI Z89.1-2014, Class C requirements
• Unvented hats meet ANSI Z89.1-2014, Class E requirements
• Meet requirements for “reverse wearing” and “extreme cold”
• 4-point woven nylon suspension with Slide-Lock or Mega Ratchet® size adjustment for head sizes 6.5-8
• Moisture-wicking brow pad is removable, washable and replaceable
• Vented options allow increased air circulation
• Available in full brim or cap style (cap style accommodates 2-point chin strap)
• Accessory slots accommodate a variety of eye, face and hearing products
• Made in U.S.A.
product code listed above
PRO TIP: WHAT TYPE OF HARD HAT SHOULD YOU CHOOSE?
Using proper head protection is essential to protect workers’ heads from falling objects, bumps, or impacts. Type I hard hats offer protection from overhead falling objects, whereas Type II safety helmets also provide lateral protection. Employers must assess workers’ exposure to hazards and select the correct head protection to protect workers. Full brim hard hats and facing the bill forward all deflect falling objects away from workers’ faces.
BASEBALL STYLE BUMP CAPS
• Reflective accents keep workers seen and safe
• Internal plastic shell with shock absorption EVA pad
• Side breathable mesh for ventilation
• Lightweight design for easy carry and storage
• Machine washable (remove plastic shell before washing)
HEARING PROTECTION
HEARING PROTECTION
Protect workers from noise levels that can damage their hearing.
REUSABLE 54
DISPOSABLE ...................... 54
PRO TIP:
Hearing protection devices (HPDs) filter out loud noise. This means they do not block out sound completely, but they reduce the amount of sound reaching the delicate parts of the ear. By doing so, they offer some protection so that hearing will not get overloaded by the surrounding noises (glare) that interfere with speech and machinery sounds.
REUSABLE EARPLUGS
• ANSI S3.19-1974 compliant
• Noise Reduction Rating (NRR) 26
• Pre-molded triple flange silicone designed to conform to ear canal shape for optimal hearing protection
• Material is washable
• Hi-vis yellow makes compliance checks quick and easy
• Reusable to reduce cost and waste
• Individually packaged per pair
Recommended for job applications involving assembly and mechanical tasks, chipping, chiseling, cleaning, drilling, furnace operations, grinding, heavy equipment operations, machining, metal repair, painting, pouring/casting, power fastening, riveting, sanding, sawing and welding.
DISPOSABLE EARPLUGS
• ANSI S3.19-1974 compliant
• Noise Reduction Rating (NRR) 31
• Contoured for easy insertion and comfort
• Foam earplug expands gradually for a secure fit
• Hi-vis yellow makes compliance checks quick and easy
product code listed above
SEASONAL
SEASONAL
Keep your workers visible and protect them from weather-related conditions with seasonal gear they can keep close at hand.
COOLING TOWEL
• Prevents heat stress and fights fatigue with advanced PVA cooling technology
• Remains active for hours
• Can be used over and over again
• Activates quickly and easily with water
Employees should practice heat stress prevention year-round! Employers must ensure workers can access resources such as drinking water, shade, and seasonal PPE like cooling, rain, and winter gear. Wearing layers of PPE, warm indoor working environments, and heat-producing equipment can all contribute to heat stress during cooler months.
HI-VIS RANGER SUN HAT
• ANSI compliant high-visibility lime fabric with 1" reflective tape
• Breathable mesh venting for air flow
• Wide brim helps shade face and head
• Drawstring cord
• Machine washable
SEASONAL
COOLING BANDANA
• Advanced PVA material retains water
• Fights the effects of heat stress and fatigue
• Cools for up to four hours
• Reusable by re-soaking to activate
• Tie closure for personalized fit
“Though I wear a safety vest, I seem to be more visible with the hat.”
HARD HAT NECK SHADE
• ANSI compliant high-visibility lime polyester fabric and reflective tape
• Breathable mesh venting for air flow and to help keep workers cool
• Protects neck from harmful UV rays
• Fits most hard hats
• Machine washable
NEW HI-VIS COOLING NECK SHADE/GAITER
• Lightweight, breathable, 4-way stretch ChillSoft fabric that is cool to the touch
• Active moisture-wicking technology spreads moisture for rapid evaporation
• Provides coverage for the back of the neck and ears; versatile for different activities and use with other head gear
SEASONAL
NEW LONG-SLEEVED COOLING T-SHIRT
• Breathable ChillSoft fabric, cool to the touch
NEW SHORT-SLEEVED COOLING SHIRTS
• Features reflective tape at the sides for added visibility
• Lightweight, breathable ChillSoft fabric that’s cool to the touch
• 4-way fabric stretch moves easily and naturally with the worker’s body for allday comfort
• Active moisture-wicking technology disperses moisture for rapid evaporation
• Side vents for added comfort and ease of movement
• Lightweight 4-way fabric stretch for flexibility and all-day comfort
• Active moisture-wicking technology disperses moisture for rapid evaporation
• Side vents for added comfort and ease of movement
Women’s Fit V-Neck Type R Class 2 Cooling T-Shirt See page 25.
77852 (size Large/XLarge)
Search product code listed above.
Rechargeable battery supports USB charging
front pockets for storage
and heating modules regulate temperature
Two
Cooling
SEASONAL
FLEXIFREEZE PROFESSIONAL SERIES ICE VEST
TYPE O CLASS I
This vest harnesses the power of 96 ice cubes to effectively lower a worker’s core temperature. It removes 35% more heat than gel or evaporative solutions. Cooling lasts 1-1.5 hours depending on ambient air temperature, humidity level, body size, and activity.
• Hi-vis vest is Type O Class 1 compliant
• Soft, flexible, insulating neoprene and rip-stop shell with YKK zipper closure
• Lightweight (3.5 lbs. including ice panels), with full range of motion
• Adjustable shoulders and sides
• 3-piece ice panel set included, along with instructions
• Hook & loop makes swapping out ice panels fast and easy
• 2 large front pockets are perfect for a cell phone and keys
• Machine washable (mesh laundry bag included)
• Soak in water 2-5 minutes to activate
• Remains hydrated up to 4 hours
• Reusable, just re-soak
PRO TIP:
74929 (one size)
74930 (one size)
Search product code listed above
AVAILABLE
FLEXIFREEZE COOLING COLLAR WITH 2 ICE STRIPS
This collar uses the heat-absorbing power of ice to effectively draw heat away from the back of the neck as it thaws to help keep workers cool and comfortable in hot environments.
• Includes 1 collar and 2 FlexiFreeze 8-cube ice strips (food-grade plastic ice sheets)
• Soft inner lining for comfort
• Breakaway adjustable hook & loop fastener for comfortable fit range: S (15") neck to L (24") neck
• Hook & loop makes swapping out ice panels fast and easy
• Machine washable
Unlike fluorescent yellow/ orange apparel designed to be used in traffic, Type O Class 1 apparel has lower minimum requirements for overall reflective material and background fabric to be ANSI compliant, and is meant for off-roadway work.
• Zipper leg openings extend to knees for easy on/off over shoes or boots
RAIN JACKET
• ANSI/ISEA 107-2020 Type R Class 3 compliant
• 2" ANSI-compliant silver reflective tape
• Made of 300D oxford fabric with 190T tafetta lining; YKK zipper
• Black bottom, cuffs and elbow patches hide dirt
• 2 mic tabs; drawstring hood; and front clear ID pocket
Hole for attaching a fall harness on back
Search product code listed above
ENSURE THE RIGHT FIT Visit JJKeller.com/SAFEGEAR for size chart.
“My husband ordered this jacket, and is delighted with it and the service he has received.”
NEW RAIN PONCHO TYPE R CLASS 3
• ANSI/ISEA 107-2015 Type R Class 3 compliant
• Made of taffeta 100% polyester with TPU lamination
• Designed to shed water and withstand high winds while remaining comfortable and dry inside
• Drawstring hood to keep rain out; outside front chest pocket
• Folds up into the front pocket for easy storage or carrying
BUEBERRIES | MAINE RAIN PONCHO
Search product code listed above.
RAIN
Women’s Fit Rain Jacket and Pants See pages 27.
J. J. Keller Advantage members save on IMPRINTED SAFEGEAR! Take advantage at JJKeller.com/SAVE
SEASONAL
WINTER GEAR
REFLECTIVE KNIT WINTER HAT
• Reflective yarn sewn throughout, reacts with retroreflective properties to light
• Acrylic knit fabric
• Stretchable material fits most sizes
• Machine washable
KNIT WINTER HAT
• Reflective stripe provides visibility at night or low light
• 100% soft acrylic knit fabric
• Folding cuff provides ear protection
• Drawstring cord
• Stretchable material fits most sizes
• Machine washable
“Everyone in my family now has their own reflective hat ...my daughter loves her pink one, and I love mine for construction jobsites!”
RIAH | SEATTLE
KNIT BALACLAVA
• Polyester knit fabric
• Stretchable material fits most sizes
• Fits under hard hat or helmet*
* Unless hard hat manufacturer prohibits it. Not to be worn as electrical PPE or for shock protection.
“This works great — love it and the color is great.” NUTP | SAFETY PROFESSIONAL | COVINGTON, GA
BEANIE WITH RECHARGEABLE LIGHT
• Reflective yarn on cuff
• Acrylic knit fabric
• Stretchable material fits most sizes
• Built-in, hands-free LED flashlight with 3 lighting modes
• Standard USB port for battery charging; full charge lasts up to 4 hours (continuous use) or 6-8 hours (intermittent use)
Search product code listed above
SEASONAL
NEW J. J. KELLER® SAFEGEAR® HEATED HAND WARMER POUCH
• Protects hands from the elements
• 4-12 hours of heat depending on setting
• 3 heat levels
• Auto shutoff when not in use
• Water-resistant material
• Rechargeable lithium ion battery
• Convenient storage pocket for essentials
• Available in black or orange HEATED
BLACK 76287
ORANGE 76288
Search product code listed above
Heated Jacket See page 21.
Roomy front pocket stores your essentials.
PRO TIP: HEATED APPAREL
Keeping workers safe and warm is essential for peak performance on the job. With battery-operated heated apparel like hand warmers and jackets, you can prevent frostbite and other cold related issues while boosting productivity. Ensure your team stays focused and efficient, no matter how harsh the conditions!
CLASS E SNOWPANTS
• ANSI/ISEA 107-2020 Supplemental Class E compliant (combine pants with an ANSI Class 2 or 3 top to create ANSI Class 3 outfit)
• 100% polyester rip-stop oxford fabric with 190T taffeta lining with 160 gram polyfill inside
• 2 side hand plus 2 back YKK zippered pockets
• Elastic waistband with drawstring; black bottoms hide dirt
CLASS E SNOWPANTS
Available in sizes S-5XL
LIME 72198 (size Large)
Search product code listed above
ENSURE THE RIGHT FIT
YKK zippered legs open for easy on/off over shoes/boots
ACCESSORIES
PPE ACCESSORIES
Little changes can make a big impact on safety. Give your workers solutions to keep them visible and safe, as well as organized.
63
63
How
PPE ACCESSORIES
SLING BAG
• Reflective safety stripes
• Made of 210 denier polyester
• Black adjustable drawstring closure
• Reinforced triangle corners with metal grommets; handle on back for carrying/hanging
“This product will help me stay safe. I’m using this product for emergency situations that might occur while traveling. I like the color and style.”
KATHY | MISSOULA, MT
NEW BACKPACK
• Silver reflective safety tape
• Made of 100% polyester 600D Oxford with PVC coating
• Adjustable padded straps; padded back for comfort
• 1 front mesh pocket; 2 side pockets with mesh vents
• 19" L x 121 2" W x 8" H
• Measures 191 2" x 161 2" overall
• Durable polyester withstands wear and tear
• Removable and adjustable padded shoulder strap
• Water-resistant backing
• 2 end accessory pockets for quick access
• 1 front zippered pocket
• Dimensions: 231 2" L x 91⁄2" W x 1113 16" H
Search product code listed above
Mesh zippered front pocket folds out to hold full-brim hard hat or similar
WARNING: This product can expose you to chemicals, including N,N-Dimethylformamide, which is known to the State of California to cause Cancer. For more information, go to www.P65Warnings.ca.gov.
Orange Pink
DUFFLE BAG
FOOT, KNEE & BACK PROTECTION
FOOT, KNEE & BACK PROTECTION
Safety goes beyond gloves, vests and hard hats. Prevent worker injuries by providing safety equipment for task-related conditions.
BACK SUPPORT BRACE
• Reflective tape for work in low light
• Hook & loop closure; adjustable suspenders
• PVC rods and elastic tension bands for extra support
NOTE: The use of this belt will not prevent injury and should not be used to overcome physical disabilities. This belt should be used only after receiving training in proper lifting techniques.
BACK SUPPORT BRACE
Available in sizes S-3XL
65106 (size Large)
Search product code listed above
PRO TIP:
PPE is the last line of defense from hazards when engineering controls, work practices, and administrative controls aren’t adequate to keep you safe. Providing the proper protective gear can make all the difference to job performance and safety. Assess each task and choose the best equipment to fit your industry, climate, and hazard level.
FOOT, KNEE & BACK PROTECTION
ICE CLEATS
NEW MIDSOLE ICE CLEATS WITH TUNGSTEN STUDS
Excellent for work sites that require frequent indoor/outdoor transition, driving or climbing a ladder
7 spike crampons for great traction in ice or snow
Tungsten carbide studs and thick rubber for strong performance even in sub-zero temperatures
High-visibility orange strap for safety in low-light conditions
Adjustable elastic strap to fit different types and sizes of footwear
TUNGSTEN STUD ICE CLEATS
10-STUD ICE TRACTION CLEATS
• One-piece ice traction device for shoes/boots delivers firm grip and stability
• 10 durable steel studs on heel and forefoot (6 replacement studs)
• Stretchable rubber fit for easy on/off; fold for carrying ALSO AVAILABLE
Juno Jones Women’s Meti II With Steel Toe Boots Search product code: 74141 Visit JJKeller.com
“Since using these ice cleats I can safely walk outside when it freezes. Great bang for the buck and it can prevent serious injuries.”
ERIC122 5 | NEW YORK
Jones Women’s Solstice
Composite Toe Sneakers Search product code: 74251 Visit JJKeller.com
Rotate cleats to the top of the foot for walking indoors or where ice traction isn’t needed.
ENSURE THE RIGHT FIT
Visit JJKeller.com/SAFEGEAR for size chart.
Jones Men’s Classic Composite Toe Hickory Brown Boot Search product code: 74268 Visit JJKeller.com
HI-VIS ICE TRACTION CLEATS
• One-piece Thermo Plastic Elastomer (TPE) ice traction device for shoes/boots delivers firm grip and stability
• Multi-directional steel cleats on heel and forefoot for better traction
• Stretchable rubber fit for easy on/off; fold for carrying
“We have reduced our slips and falls by 90% ...”
SAFETY GUY THAT CARES | SAFETY PROFESSIONAL | TEXAS
Juno
Juno
FOOT, KNEE & BACK PROTECTION
NEW SOFT CAP KNEE PADS
• Economical light-duty knee protection
• Thick 15mm cell foam padding
• Durable 600D polyester fabric cover for longer wear
• Hook and loop closure adjusts for exact fit
PROFESSIONAL KNEE PADS
• High-density foam and thick gel cushion
• 600D polyester with breathable mesh fabric and reinforced stitching
• 2 neoprene adjustable extension straps
• Heavy-duty PP and TPR hard shell; flat cap design prevents rolling
• One size fits most
PRO TIP: KNEE PADS
Employees’ knees are important parts of their bodies that help them move, walk, run, lift, jump and more. Without them, employees wouldn’t be as mobile as they need to be to perform job tasks. However, some job tasks
require static and prolonged positions, like kneeling, which can be dangerous to their knees. That’s why knee pads are important for work that requires employees to kneel or crawl. Knee pads reduce stress on the knees, protect crucial tendons, ligaments, and bones, and keep employees safe.
FOAM KNEELING PAD
• Made with high density, thick NBR foam rubber that will not compress over time, protecting knees against hard surfaces
• Water-resistant and petroleum-resistant
• Lightweight and portable with a built-in handle making it easy to carry and transport and convenient to hang
• 131⁄2" x 20" x 1"
Need proper sizing for ALL your workers?
Proper-fitting PPE is a must to keep workers safe, compliant and efficient.
Here’s why:
• Ill-fitting apparel can create safety hazards, leading to accidents.
• PPE that doesn’t fit well can hinder tasks, lowering productivity.
• Poor fit or discomfort can discourage employees from wearing PPE.
• OSHA requires it in 1926.95 (Construction Industry) and 1910.132 (General Industry)!
J. J. Keller® SAFEGEAR® PPE has you covered, with sizes from XS to 7XL — including women’s fit options — so that everyone can get the proper fit!
“The women’s fit items from J. J. Keller SAFEGEAR are well thought out and constructed. The quality and fit are amazing, and they look great too! You can’t beat the price and quality; I’d absolutely recommend SAFEGEAR PPE.”
52% had trouble finding LARGER SIZES while had difficulty finding SMALLER SIZES
