Hylyte Flyer

GUARDRAIL, BRIDGE RAIL & CONCRETE BARRIER DELINEATORS A PART OF DELNORTH GROUP

HIGHWAY DELINEATORS Hylyte is Australia’s leading provider of highway delineation products for guardrail, bridge rail and concrete barriers. Hylyte delineators are made from UV stabilised nylon 6 and PVC, complete with class 1a reflective film. Upon impact, a Hylyte delineator will return to its original upright position, always maintaining a high level of road safety.

Joint 5

5,000mm2 delineator area

Joint 10

10,000mm2 delineator area

DGRJ5

DGRJ10

Front/Back (red/white)

Front/Back (red/white)

DGRJ5R

DGRJ10R

Front only (red)

Front only (red)

DGRJ5A

DGRJ10A

Front only (amber)

Front only (amber)

DGRJ5W

DGRJ10W

Front only (white)

Front only (white)

Using the existing guardrail fittings, the Joint 5 conveniently mounts onto the joining bolt on top of the guardrail. The Joint 5 is made using injection moulded nylon 6 with UV stabiliser. The shatterproof substrate is sized to display a 50mm x 100mm class 1a delineator.

Using the existing guardrail fittings, the Joint 10 conveniently mounts onto the joining bolt on top of the guardrail. The Joint 10 is made using injection moulded nylon 6 with UV stabiliser.

The shatterproof substrate is sized to display a 80mm x 125mm class 1a delineator.

Paddle 5

Paddle 10

5,000mm2 delineator area DGRP5

DGRP10

Front/Back (red/white)

Front/Back (red/white)

DGRP5R

DGRP10R

Front only (red)

Front only (red)

DGRP5A

DGRP10A

Front only (amber)

Front only (amber)

DGRP5W

DGRP10W

Front only (white)

The Paddle 5 is designed for installation onto the C block of the guardrail and comes complete with pre-drilled holes and M5 fixings to secure in place. The Paddle 5 is made from UV stabilised PVC and sized to display a 5,000mm2 class 1a delineator.

1300 794 397

10,000mm2 delineator area

Front only (white)

The Paddle 10 is designed for installation onto the C block of the guardrail and comes complete with pre-drilled holes and M5 fixings to secure in place. The Paddle 10 is made from UV stabilised PVC and sized to display a 10,000mm2 class 1a delineator.

sales@delnorth.com

hylyte.com.au

Twist 5

5,000mm2 delineator area

Twist 10

10,000mm2 delineator area

DGRT5

DGRT10

Front/Back (red/white)

Front/Back (red/white)

DGRT5R

DGRT10R

Front only (red)

Front only (red)

Using existing guardrail fittings, the Twist 5 mounts behind the “W” barrier on the bolt, inside the “U” channel space. The face of the “U” channel locks it in an upright position. The Twist 5 is soft impact and made from 3mm UV stabilised PVC and sized to display a 5,000mm2 delineator.

Using existing guardrail fittings, the Twist 10 mounts behind the “W” barrier on the bolt, inside the “U” channel space. The face of the “U” channel locks it in an upright position. The Twist 10 is soft impact and made from 3mm UV stabilised PVC and sized to display a 10,000mm2 delineator.

Elle 5

Elle 10

5,000mm2 delineator area

10,000mm2 delineator area

DCBE5

DCBE10

Front/Back (red/white)

Front/Back (red/white)

DCBE5R

DCBE10R

DCBE5A

DCBE10A

Front only (amber)

Front only (amber)

DCBE5W

DCBE10W

Front only (red)

Front only (red)

Front only (white)

Front only (white)

Designed for installation on pre-cast concrete barriers or bridge rails, the Elle 5 is fixed with adhesive onto the concrete barrier and has a slot or hole that slides under the existing bolts on bridge rails. The Elle 5 is a soft impact delineator and is made from UV stabilised PVC and sized to display a 5,000mm2 class 1a delineator.

Designed for installation on pre-cast concrete barriers or bridge rails, the Elle 10 is fixed with adhesive onto the concrete barrier and has a slot or hole that slides under the existing bolts on bridge rails. The Elle 10 is a soft impact delineator and is made from UV stabilised PVC and sized to display a 10,000mm2 class 1a delineator.

Butterfly

Hazard

5,000mm2 delineator area

10,000mm2 delineator area

DGRB

DGRBY

Front/Back (red/white)

Front/Back (black and yellow)

The Butterfly mounts in the ‘V’ of the guardrail onto the existing bolt, with the head of the bolt, used to hold the Butterfly snuggly in place. The Butterfly is made using a high-quality triangular polymer extrusion and available in black or white sized to display a 5,000mm2 delineator.

DCBE11

The Hazard Barrier is designed for installation on pre-cast concrete barriers and is fixed with high strength adhesive that forms a rivet type hold when it swells into the 12mm hole. The Hazard Barrier is made from Nylon 6 with UV stabilisation and sized to display a 10,000mm2 Angled Class 1a band.

10,000mm2 delineator area

DCBE11

Front/Back (red/white) Other delineation configurations available.

v

ro

R

TM

D

QL

p Ap

ed

The DCBE11 is designed for installation on the side of pre-cast concrete barriers and is fixed with high strength adhesive that forms a rivet type hold when it swells into the 12mm hole. The DCBE11 is made from Nylon 6 with UV stabilisation and sized to display a rectangular 10,000mm2 Class 1a delineator.

CONTACT US 1300 794 397 sales@delnorth.com hylyte.com.au Head Office 63 Bonville Avenue Thornton, NSW, 2322 Australia

Queensland 6/38 Eastern Service Rd, Stapylton, QLD, 4207

Western Australia Unit 312, 396 Scarbourough Beach Rd, Osborne Park, WA, 6017