Issuu on Google+

What you need to know and do about hottubs When using a hottub for your enjoyment it is good to have a clear understanding that the water you use should be treated chemically so as to allow for proper circulation and filtration. There are different kinds and sizes of hottubs in the market with some big enough to accommodate more than ten people while others can even accommodate two. The size depends with your purpose of installation depending with the number of people you would like to use the spa. The ground upon which you place your hottub must be level and smooth so as to avoid any kind of tumbling over. It should also be firm or solid so that it can be able to continue supporting the weight of both the hottubs and the users. Remember you will have to fill the tub with water and when you add many other kilograms from the users, you will require a very solid ground to handle all that. You should give a proper thought into such things like the appearance, convenience and the closeness to things such as the water and electricity source. In case where you want to install your hottub is far from the water and electricity sources, make plans on how to get a hose pipe which will be long enough for the filling of the hottubs. Electric wiring can also be done properly so as to make sure that there are no accidents which could occur due to careless installation. Consider issues that have to do with tree branches or overhead electricity and avoid installing the hot tubs under them. Sites for installation of hottubs should be chosen carefully in areas that enjoy proper drainage so as to avoid causing soggy and muddy surroundings near your hot tub. Make sure that you do not install the spa under heavy trees for your own security and that of other users. Remember that the branches could fall of when people are using the spa or even the leaves could become a potential contaminant. Avoid pathways to other essential amenities in the yard such as the sewer lines, septic tank among other areas. If you are planning to install your hottub away from the nearest water source, make sure that you have a long pipe that will help with the connection and the filling of the spa. It is advisable to have hot tubs installed approximately five feet far away from the nearest electrical outlet or panel. It is good to employ the services of a technician if at all you are not conversant with matters of electrical connections. As a part of the preparations, you should level the ground where you want to install the hottubs by removing any bumpy parts and also filling the hollow sections too. Make the pathway wide enough and make sure that there are no abstractions at all. all manner of unevenness should be dealt with totally to avoid any inconveniencing or dangerous situations. You can use some gravel to place on the leveled ground and do this depending with the size of your hottub.


What you need to know and do about hottubs