How to easily troubleshoot some hottub problems Once a person has bought a beautiful and great machine for themselves, there is always that feeling of fulfillment and achievement that always accompany that thing. This is so especially if you have been longing for a long time to have such a thing and it happens to be your very first one. Well, it may not have been the same with you but most of us do find ourselves in such a situation and this is generally possible when it is a good machine or appliance. Normally, this feeling is associated with the benefits that one is expecting to get from the appliance and whether it is a hottub or a new car, you cannot deny that this is so. You want to see it the following day and also to use it. But what if you do not know much about it? The fact is that you might be disappointed or even end up misusing it. Hottubs have a lot of benefits which are normally associated with them. Making use of them will help you both in your health as well as the mind without introducing anything foreign into your body. This is one of those things that need to be taken care of and the water that you use must be cleaned as required. There are certain problems that might be experienced if one does not clean the hottub and the water therein and we are going to discuss some of these issues. How can you know that your hottub has a problem that needs to be addressed? Even without using a testing strip, it is very easy if you follow the following things. This however does not mean that you donâ€™t need the testing strip, No, you need it. Preventing things from getting to this point is important and can be done using the strip. In case you start having skin and eye irritations, you should realize that there is already a problem with your water. This is normally caused by an imbalance in the PH and the total alkalinity of the water or even inadequate or very high levels of chlorine. This is not something that should make you worried since it can be rectified easily by adding the chlorine or other chemicals that are required for the balancing of the PH and alkalinity. You should test the PH and alkalinity level before using the hottub so as to ensure that everything is balanced. It is important to test the hottubs before and after use for only this way can you be able to avoid some of these issues. Add those chemicals that are mismatched and test to ensure that everything is properly balanced. When hottubs are use for long, one might sometimes see excessive foam than what is normal. This is also an indication of a problem that should be addressed since it is caused by an imbalance in the water alkalinity and the PH. The level of calcium could also be low causing hardness. Other problems that could be causing the excessive foam include an accumulation of contaminants and body oils, inadequate oxidation or excess chemicals in the water. You can address this problem by adding an anti-foam agent or shock. There are many other problems that could be noted during the hottubs use but all are rectifiable.
Published on Jul 14, 2011
Published on Jul 14, 2011
Once a person has bought a beautiful and great machine for themselves, there is always that feeling of fulfillment and achievement that alwa...