International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395-0056
Volume: 08 Issue: 08 | Aug 2021
p-ISSN: 2395-0072
www.irjet.net
without interference. Gravity gives the parts to the ace
b. Benefits:
achieve region. Canisters ought to in addition be Simple Re configuration
reconfigurable. The canisters utilize a critical stud to get them position. Containers are stackable and give a definitive in adaptability while reconfiguring the working
Decrease Waste Movement
Fast Changeover
Figure 07: Benefits of Parts Presentation
environment. Dismissing how storehouses are ideal for
2.5 Re configurability
little parts, different social events require larger parts.
An appropriately orchestrated lean work cell should be
These might be passed on in canisters or boxes. Again the
something besides hard to reconfigure. Indeed, the
parts ought to be given to the work cell without entering
capacity to change the strategy and go from staggering
the
work
part to wonderful part however fast as conceivable seems
commendably subsequently. In the occasion that part or
to be an out and out need. The speedier the changeover,
compartments should be removed from the cell, an extra
the less creation time is lost. Fast change foundations are
gravity support transport might be mounted in the furious
one way this can be ace. With a decent brilliant change
heading. In occasions where parts are overwhelming, lift
mechanical gathering, changeover can be refined very
help contraptions are suggested. Overwhelming parts or
quickly. Distinctive different contraptions might be gotten
boxes of parts can be stacked onto a case lifter and raised
at the workstation and traded as the circumstance
to the right work stature with electric, pneumatic, or water
requires. A lean cell should be in a flash reconfigured or
driven force.
even moved to suit get together of something else. If a
work
area.
Gravity
upholds
transports
machine or workstation should be changed, the capacity to move each part of the work cell rapidly winds up being fundamental.
Lockable
casters
on
machines
or
workstations give the pass on capacity basic to speedy and valuable changeover.
Figure 06: Parts Presentation a. Parts Presentation Basics: 1. Supply parts as required 2. Parts stacked from outside the cell 3. Use gravity sustain as the favored strategy Figure 08: Re configurability
4. FIFO parts introduction
a. Re configurability Basics: 1. Fixtures must be anything but difficult to change 2. Mobility is basic
© 2021, IRJET
|
Impact Factor value: 7.529
|
ISO 9001:2008 Certified Journal
|
Page 1785
