PaintExpo Expo PRE-TREATMENT
customer provided work pieces in the factory in Greven.
SLF Oberflächentechnik GmbH
Novelty: Blasting Robot ReCo-Blaster Novelty: Blasting Robot ReCo-Blaster SLF, manufacturer of airblast, paint spraying and conveying systems for large components, will introduce its new blasting robot ReCoBlaster. The newly developed blasting robot offers
an up to 5 times higher surface capacity compared to manual blasting, a continuous blasting process with reproducible blasting results as well as an ergonomic workstation. The blast cleaning robot is available for tests with
PRE-TREATMENT
Innovative Application System for nanotechnological conversion products It allows to increase the performances of the pretreatment process in terms of: - Quality: higher and constant quality are guaranteed by the fact that the solution is always fresh and not recirculated. There is no
PRE-TREATMENT
Wandres GmbH
Innovative Brush Cleaning Solution During the PaintExpo 2012, Wandres GmbH microcleaning will present innovative brush cleaning solutions for flat and arched surfaces. The patented Ingromat® system not only uses the mechanical brushing effect but also
Grevener Landstraße 22-24, 48268 Greven, Germany, Phone +49 2575 971930, info@slf.eu, www.slf.eu Hall 2, Stand 2229
pollution from drag-out and no contamination by accumulation of reaction products. - Costs: lower running costs by reduced chemicals consumption, no sludge, no waste, room temperature, no maintenance. Softrain system is already in use among job shop coaters, and in the fields of automotive components, appliances, architectural aluminum, batch hot dip galvanizing.
Soft Rain Srl
At PaintExpo Soft Rain Srl presents an innovative equipment for the application of nanometric conversion products by means of nebulization. The Softrain system can be easily integrated into existing pretreatment lines or planned for new projects.
SLF Oberflächentechnik GmbH,
capillary attraction to remove particles and fine dust. The linear brushes are micro-moistened with an antistatic fluid. The subject surface itself remains dry so that it may be lacquered or coated right after the cleaning process. Unlike
cylindrical brush rollers, linear brushes may also adapt to arched surfaces. The brushes are mounted on a flexible pressure buffer at the product contact area. If a robot uses this type of cleaning module (Robot Sword Brush) it may clean structures up to -30/+10 mm in relation to the flat surfaces. Robot-assisted cleaning with Sword Brushes provides a constant cleaning quality at low operating costs.
Soft Rain Srl, Via dell’Artigianato SNC, 47824 Poggio Berni (RN), Italy, Phone +39 0541 62705, info@softrainsystem.com, www.softrainsystem.com Hall 1, Stand 1446
Wandres GmbH, Dorfstrasse 12, 79256 Buchenbach, Germany, Phone +49 7661 93300, info@wandres.com, www.wandres.com Hall 1, Stand 1651
international PAINT&COATING magazine - MARCH/marzo 2012 - N. 14
105