Canon MX870 Troubleshooting Error Codes

Fix: Canon MX870 Error Code U052

1. If there is an issue with the print heads, then you may encounter the error U052. You may also experience this error code if you have installed the incorrect print head on your printer.

2. To resolve this issue, you need to install the correct printhead in your printer.

3. First, get a suitable printhead.

4. Remove the incorrect printhead from the printer

5. Install the correct new printhead in the printer.

6. This will clear error code U052.

Resolved: Canon MX870 B200 Error

A faulty printhead is the most common cause of B200 error. You can quickly fix this error using these guidelines.

1. First and foremost, try the factory reset process. You can refer to the previous sections for a detailed procedure.

2. If this technique doesn't solve the trouble, go ahead with the printhead cleaning process.

3. Clean the print head using a clean cotton swab dipped in water.

4. After cleaning the printhead, check to see if the B200 error is resolved. If not, uninstall the existing Canon Pixma MX870 printer driver from your computer. Download the new printer driver software and reinstall it on your computer.

5. Then ensure the error B200 is gone.

Resolved: Canon MX870 Error Code 6a80

See the steps below to learn how to troubleshoot a Canon MX870 with error code 6A80.

1. Clean the printer docking area with a makeshift swab dipped in alcohol.

2. After cleaning the dock area, allow it to dry. Now check if the error code 6A80 is resolved.

3. If not, turn off the printer and press and hold the Stop, Black Copy, OK, and Power buttons simultaneously for 10 seconds.

4. Then press and hold the Stop button, Black and White Copy button, and OK button at the same time.

5. Release the button as soon as the printer turns on.

6. Hopefully, this should fix the error code 6A80.

Resolved: Canon MX870 Error Code 5b00

1. Error 5B00 indicates a waste ink counter overflow problem.

2. You need to reset the ink absorber to 0% to fix this error.

3. First, put the printer into service mode by following the steps below.

4. Turn off the printer and press the power button for 2-3 seconds or until it turns on.

5. Press the STOP button six times. Each time you press the button, the light changes from orange to blue.

6. Wait for the printer to power on fully.

7. The blue light stays on after he flashes for 5 seconds.

8. If the printer's main display is blank, it means the printer has successfully entered service mode.

9. Download and run Service Mode Tools on your computer to fix this error code.

Solved: Canon MX870 Error Code 5100

1. If you come across the error code 5100 on your Canon printer, see if you have left any packing covers inside the printer.

2. If so, please remove them.

3. Make sure all the ink cartridges are correctly installed.

4. Check for and remove any jammed paper inside the printer. Reset the printer if necessary

1. If foreign objects are stuck inside your printer, then you may encounter the Canon MX870 troubleshooting error C000.

2. To resolve this error, perform the simple steps given below

Canon MX870 Error Code C000 - Solved

3. Open the printer cover

4. Turn off your Canon printer and unplug the power cord.

5. If you find any foreign particles inside the printer, remove them carefully.

6. After removing the jammed object, turn on the printer and close the cover.

7. Now, the error C000 will be resolved