Group 30: Electrical system
Repair instructions
Programming an empty control unit When a new engine control unit is installed, where no software has been downloaded, the control unit must be programmed. The new control unit must have the same part number as the old control unit. If the control units do not have the same part number, it will not be possible to program the new control unit until a “Conversion kit” has been ordered from Volvo Penta. If the control units have the same part number, the new control unit can be programmed as usual. Please refer to “Programming a control unit”. If the part numbers do not coincide – proceed as possible: 1.
Have both part numbers available.
2.
Log in to Volvo Penta Network’s web site: www.vppn.com
3.
Choose “VODIA” in the left-hand menu.
4.
Choose “Conversion kit” in the left-hand menu. A new page, “Conversion kit / Accessory kit”, opens up.
5.
Click the text “Available conversions kits” which is shown in bold face.
6.
A new window opens. Follow the instructions given in the window.
7.
Return to the “Conversion kit / Accessory kit” page and follow the instructions to order a new “conversion kit”.
8.
Volvo Penta’s database is now updated. It can take about a minute before a confirmation is sent.
9.
Programing of the control unit can now start. Please refer to “Programming a control unit”.
23
