Identification numbers

DSO M14 02 1 84 1 UNLEADED FUEL ONLY

A

B

SX/DP-S

Type Approval Number

A type approval number is assigned to an engine model when it is certified for exhaust emissions. There are two certification decals placed on the engine to verify engine certification; one on the EFI computer cover, and the other at the front of the port cylinder head (A). These decals must be maintained so engine certification can be verified in the future. When an emissions check is required, the plug (B) located on the port high-rise elbow can be removed for installation of a test probe.

Identification Numbers

Immediately after you have taken delivery of your boat, make a note of the serial/product number and model designation of the engine, drive and shield. Include the serial number and model designation of the boat and any extra equipment. This information is necessary when you contact your Volvo Penta or boat dealer for service and spare parts. Take a copy of the information and keep it in a safe place so it is available should the boat be stolen.

Engine

Product Designation (A)........................................ Serial Number (B)................................................. Product Number (C)..............................................

Drive/Shield

Product Designation (A)........................................ Serial Number (B)................................................. Product Number (C).............................................. Gear Ratios (D)..................................................... Propeller designation............................................

Boat

Model/Serial Number............................................ Extra equipment.................................................... ..............................................................................

3.0 4.3, 5.0, 5.7 Location of type approval plate, engine type

The engine type approval plate is located on the lefthand valve cover of the engine (3.0 models) and on the inside of the port valve cover (4.3, 5.0 and 5.7 models).

Location of drive/shield type plate SX/DP-S

The drive type plate is located on the drive unit behind the port trim/tilt cylinder. The shield type plate is located on the top of the inner transom shield.